National Grid Gas Line Material Auction
Previous Page Listing ID#: 94093

Auction Location

Liverpool, NY 13088
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Friday Sep 28
Bidding Ends: Tuesday Oct 23
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
JBM Auction Management, Inc.

Website: jbmmanagement.com

GoToAuction.com ID#: 4985
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Welcome to our Internet Auction. Be sure to Log In (Or REGISTER if this is your first visit) in order to bid. These items are located in Liverpool NY. Please use the contact person in each lot to setup appointments or to ask questions. While descriptions are believed to be accurate, information and quantities given by the Auction catalog, Auctioneer, owner, or other Auction personnel is offered only as a guide. Responsibility for proper nomenclature and identification of Auction merchandise is the responsibility of the bidder. Bidders are advised to inspect items prior to purchase. This is an absolute auction, everything sells to the last bidder! All Auction items are sold AS-IS, WHERE-IS, WITH ALL FAULTS and DEFECTS THEREIN. There is no guarantee as to merchantability by Auctioneer or Owner Buyer's premium of 15% will be charged on all items. Sales tax will be collected on all taxable items unless bidder has a valid exemption. All payments are to be made to JBM Management at the close of the auction. Items not paid for will result in loss of bidding privileges. Items not picked up by the pickup dates become the property of the auctioneer and will be disposed of as the auctioneer see fit. Please contact JBM Management with your questions and comments. Email - auctec14@gmail.com or phone - 585-739-6435 or Bert at 585-749-0022 Email at Bert@auctionsalesite.com
Listing Information
National Grid from time to time has excess materials and parts from their gas and electrical service companies. These parts and materials are brand new and stored away from the elements. Call for shipping questions

1
ELSTER PERFECTION 51219 PLASTIC ELBOW 1/2IN
 ELBOW, PLASTIC, 1/2IN CTS, 90 DEG, MECHANICAL STAB TYPE ENDS AND .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192 ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

2
FLANGE, SLIP-ON, 6IN IPS, RAISED FACE.
 FLANGE, SLIP-ON, 6IN IPS, RAISED FACE. CLASS 300. MAXIMUM OPERATING PRESSURE 740 PSI, DIMENSIONS AND DRILLING IN ACCORDANCE WITH ANSI B16.5. MATERIAL WITH ASTM A-105 OR ASTM A-181, GRADE II. IN COMPLIANCE WITH NMPC SYSTEM SPECIFICATION.

3
FLANGE, SLIP-ON, 8IN IPS, RAISED FACE. CLASS 300.
 FLANGE, SLIP-ON, 8IN IPS, RAISED FACE. CLASS 300. MAX OPER PRESSURE 740 PSI. DIMENSIONS AND DRILLING IN ACCORDANCE WITH ANSI B16.5. MATERIAL WITH ASTM A-105 OR ASTM A-181 GRADE II. IN COMPLIANCE TO NMPC SYSTEM SPECIFICATION G-1009, LATEST REVISION

4
FLANGE, SLIP-ON, 12IN IPS, RAISED FACE. CLASS 300
 FLANGE, SLIP-ON, 12IN IPS, RAISED FACE. CLASS 300. MAX OPER PRESSURE 740 PSI. DIMENSIONS AND DRILLING IN ACCORDANCE WITH ANSI B16.5. MATERIAL WITH ASTM A-105 OR ASTM A-181, GRADE II. IN COMPLIANCE TONMPC SYSTEM SPECIFICATION G-1009, LATEST REVISION

5
FLANGE, 2 INCH, RAISED FACE, 300# CLASS,
 FLANGE, 2 INCH, RAISED FACE, 300# CLASS, WELD NECK, STEEL, STANDARD BORE, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

6
FLANGE, 2IN, BLIND, RAISED FACE, 300#
FLANGE, 2IN, BLIND, RAISED FACE, 300# CLASS, STEEL, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

7
FLANGE, 4 INCH, BLIND, RAISED FACE, 300# CLASS,
FLANGE, 4 INCH, BLIND, RAISED FACE, 300# CLASS, STEEL, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

8
FLANGE, 6 INCH, BLIND, RAISED FACE, 300#
FLANGE, 6 INCH, BLIND, RAISED FACE, 300# CLASS, STEEL, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

9
FLANGE, BLIND, 8IN IPS, CLASS 300 RAISED FACE,
FLANGE, BLIND, 8IN IPS, CLASS 300 RAISED FACE, MAXIMUM OPERATING PRESSURE 740 PSI, FORGED CARBON STEEL IN COMPLIANCE WITH ANSI B16.5 AND ASTM A-105, NMPC SYSTEM SPECIFICATION G-1009, LATEST REVISION

10
UMAC VALVE, EXCESS FLOW, FOR 1/2IN CTS, P3225087
VALVE, EXCESS FLOW, FOR 1/2IN CTS, .062 WALL, STICK, HD PE 3408, 10IN LONG

11
ELSTER PERFECTION 51564 VALVE, 1/2IN CTS,
VALVE, EXCESS FLOW, FOR 1/2IN CTS, .062 WALL, STICK, HD PE 3408, 10IN LONG

12
ELSTER PERFECTION 51564 VALVE, 1/2IN CTS,
VALVE, EXCESS FLOW, FOR 1/2IN CTS, .062 WALL, STICK, HD PE 3408, 10IN LONG

13
ELSTER PERFECTION 518-060-90 VALVE
VALVE, EXCESS FLOW, FOR 1IN CTS WITH .090IN INSERT STIFFENER, TYPE PE 3408 MATERIAL, STICK TYPE, ORANGE LABEL 700, INSTALLED IN A PERFECTION PARMASET COUPLING WITH DIRECTION LABEL FOR ATTACHMENT TO RISER

14
ELSTER PERFECTION 518-060-90 VALVE
VALVE, EXCESS FLOW, FOR 1IN CTS WITH .090IN INSERT STIFFENER, TYPE PE 3408 MATERIAL, STICK TYPE, ORANGE LABEL 700, INSTALLED IN A PERFECTION PARMASET COUPLING WITH DIRECTION LABEL FOR ATTACHMENT TO RISER

15
ELSTER PERFECTION 51761 Plastic TEE 1/2IN CTS
Plastic TEE 1/2IN CTS, THREE WAY, MECHANICAL STABTYPE ENDS AND .062IN WALL PE INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

16
ELSTER PERFECTION 50309 ELBOW
ELBOW, 90 DEG, PLASTIC, 2IN IPS, MECHANICAL STAB T YPE ENDS AND INSERT STIFFENERS FOR 2IN SDR 11 PE P IPE, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 A ND HAVE A M.O.P. RATING TO 100 PSI

17
DRESSER 0731-0010-001 COMPRESSION CAP
CAP, COMPRESSION, RESTRAINT, 6IN IPS STEEL, BOLTED , WITH 1IN VENT, EPOXY COATED, ANODE CLIP, E-COAT GRIP RINGS

18
DRESSER 0731-0032-001 COMPRESSION CAP
CAP, COMPRESSION, RESTRAINT, 6IN IPS STEEL, BOLTED , WITH 1IN VENT, EPOXY COATED, ANODE CLIP, E-COAT GRIP RINGS

19
ELSTER PERFECTION 51941 TAPPING TEE ELECTROFUSION
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

20
ELSTER PERFECTION 51941 TAPPING TEE ELECTROFUSION
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

21
ELSTER PERFECTION 51942 TAPPING TEE ELECTROFUSIO
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

22
ELSTER PERFECTION 51942 TAPPING TEE ELECTROFUSION
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

23
ELSTER/PERFECTION 50520136 TAPPING TEE ELCTROFUSIO
TEE, TAPPING, ELECTROFUSION, 1IN CTS(0.090IN INSER T) X 6IN SADDLE, PE 100/4710, STAB TYPE OUTLET WIT H FIXED INSERT, EF D2513/F1055

24
ELSTER/PERFECTION 50520136 TAPPING TEE ELCTROFUSIO
TEE, TAPPING, ELECTROFUSION, 1IN CTS(0.090IN INSER T) X 6IN SADDLE, PE 100/4710, STAB TYPE OUTLET WIT H FIXED INSERT, EF D2513/F1055

25
ELSTER PERFECTION 51686 PLASTIC TEE
TEE, PLASTIC SERVICE, 1/2IN CTS X 12IN RECTANGULAR BASE SADDLE, HEAT FUSABLE PE 3408, WITH .8IN COUPON RETAINING PUNCH AND STAB TYPE MECHANICAL OUTLET WITH .062IN FIXED INSERT

26
BUFFGAUGE MNEU-NC-100-20-1-CV PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE

27
BUFFGAUGE MNEU-NC-100-20-1-CV PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE

28
BUFFGAUGE MNEU-NC-100-20-1-CV PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE

29
BUFFGAUGE MNEU-NC-B-B-075-20 PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 3/4IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE.

30
BUFFGAUGE MNEU-NC-B-B-075-20 PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 3/4IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE.

31
MERCO VALVE , 1-1/4IN
VALVE, MERCO, 1-1/4IN

32
MERCO N0114 3/4 VALVE
MERCO N0114 3/4 VALVE

33
WALWORTH 4in.END VALVE
WALWORTH 4in.END VALVE

34
DRESSER, COUPLING 0039-0024-215, 2IN, STYLE 39
DRESSER, COUPLING 0039-0024-215, 2IN, STYLE 39

35
PERFECTION CORP 55471 MECHANICAL TEE
PERFECTION CORP 55471 MECHANICAL TEE TAP 6IN X 1-1/4IN IPS

36
MERCO VALVE, 1-1/2IN, 114
VALVE, MERCO, 1-1/2IN, 114

37
DRESSER 0038-0255-334 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLTED, CAST IRON PIPE, 12IN SEAL ONLY, DISSEMBLED TYPE WITH 7IN STEEL BODY AND PLAIN GASKETS (13.20IN O.D.) MAXIMUM OPERATING PRESSURE 25 PSIG

38
DRESSER 0038-0255-334 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLTED, CAST IRON PIPE, 12IN SEAL ONLY, DISSEMBLED TYPE WITH 7IN STEEL BODY AND PLAIN GASKETS (13.20IN O.D.) MAXIMUM OPERATING PRESSURE 25 PSIG

39
DRESSER 0090-5619-677 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, INSULATED, REDUC ING, 1-1/4IN IPS STEEL X 1IN CTS, NUT TYPE, E-COAT , ANODE CLIP

40
DRESSER 0090-5626-677 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, INSULATED, REDUC ING, 1-1/2IN IPS STEEL X 1IN CTS, NUT TYPE, E-COAT , ANODE CLIP

41
DRESSER 00389099201 COMPRESSION COUPLING
COUPLING, COMPRESSION, CONDUCTIVE, BOLT TYPE, 12INCH, RESTRAINT, WITH ARMORED GASKETS, FOR STEEL TO STEEL, WITH 7IN BARREL, COATED WITH 10 MILS OF EPOXY, MAXIMUM OPERATING PRESSURE 300 PSIG

42
WELDNECK 8IN IPS FLANGE
FLANGE, WELDNECK, 8IN IPS, RAISED FACE, CLASS 300 MAXIMUM OPERATING PRESSURE 740 PSI, DIMENNSIONS AN D DRILLING TO BE IN ACCORDANCE WITH ANSI B16.5, MA TERIAL WITH ASTM A-105 OR ASTM A-181 GRADE II, NMP C SYSTEM SPECIFICATION G-1009, LATEST REVISION

43
ELSTER PERFECTION 50101 PLASTIC COUPLING
COUPLING, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE ENDS WITH TWO .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

44
ELSTER PERFECTION 50101 PLASTIC COUPLING
COUPLING, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE ENDS WITH TWO .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

45
ELSTER PERFECTION 50101 PLASTIC COUPLING
COUPLING, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE ENDS WITH TWO .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

46
ELSTER PERFECTION 51561PLASTIC COUPLING
COUPLING, PLASTIC, REDUCING, 1IN CTS X 1/2IN CTS M ECHANICAL STAB TYPE ENDS WITH .090IN, .062IN WALL INSERTS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D25 13 AND HAVE A M.O.P. RATING TO 100 PSI

47
ELSTER PERFECTION 51561PLASTIC COUPLING
COUPLING, PLASTIC, REDUCING, 1IN CTS X 1/2IN CTS M ECHANICAL STAB TYPE ENDS WITH .090IN, .062IN WALL INSERTS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D25 13 AND HAVE A M.O.P. RATING TO 100 PSI

48
ELSTER PERFECTION 51561PLASTIC COUPLING
COUPLING, PLASTIC, REDUCING, 1IN CTS X 1/2IN CTS M ECHANICAL STAB TYPE ENDS WITH .090IN, .062IN WALL INSERTS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D25 13 AND HAVE A M.O.P. RATING TO 100 PSI

49
SMITHBLAIR EZ48A7136068 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, CONDUCTIVE, 4IN IPS STEEL X 4IN IPS STEEL/PE, BOLTED, EPOXY COAT, ANODE CLIP, E-COAT GRIP RINGS

50
SMITHBLAIR EZ68A715362811 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, CONDUCTIVE, 6IN IPS STEEL X 6IN IPS STEEL/PE, BOLTED, EPOXY COAT, ANODE CLIP, E-COAT GRIP RINGS

51
90 DEGREE IRON ELBOW 1-1/4 INCH
ELBOW, IRON, MALLEABLE, STREET, THREADED, 90 DEG CLASS 300, 1-1/4INCH, MATERIAL TO ANSI 16.3, STANDARD TAPER PIPE, THREADS TO ANSI B1.20.1

52
ELSTER PERFECTION 50048 CAP END
CAP, PE, 1IN CTS, 0.090/0.099/0.102, MECHANICAL, P E100, BLIND END, UNIVERSAL CTS OUTLETS, BOTH ENDS FUNCTIONAL, ONE END OPEN, ONE END COVERED BY REMOV EABLE CAP, TO BE MANUFACTURED IN ACCORDANCE WITH S PEC MATL 3030, W/NO REGRIND

53
ELSTER PERFECTION 50011 PLASTIC CAP 1/2IN
CAP, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE W/.06 2IN WALL INSERT STIFFENER, MUST BE CERTIFIED TO D. O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 1 00 PSI

54
ELSTER PERFECTION 50011 PLASTIC CAP 1/2IN
CAP, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE W/.06 2IN WALL INSERT STIFFENER, MUST BE CERTIFIED TO D. O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 1 00 PSI

55
DRESSER 0073-0003-001 REPAIR SLEEVE DUCTILE IRON
SLEEVE, REPAIR, 3IN DUCTILE IRON FOR STEEL PIPE COUPLING WITH 1-1/4IN THREADED VENT AND PLUG, FOR REPAIRING THREADED COUPLINGS.

56
DRESSER 8IN SPLIT TYPE SLEEVE
SLEEVE, STEEL PIPE, CAST STEEL, 8IN SPLIT TYPE DRE SSER 73

57
DRESSER 01600012206 CLAMP
CLAMP, BELL JOINT, CAST IRON, 8IN (9.05IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION

58
SMITH-BLAIR/CSI 31400048008000 SERVICE SADDLE 4IN
SADDLE, SERVICE, 4 X 1IN NPT TAP, CAST IRON PIPE, INSULATED DOUBLE STRAP TYPE, DUCTILE IRON BODY, RU BBER COMPOUND GASKET FOR USE WITH NATURAL GAS, E-C OATED, PLATED OR EPOXY COATED TO RESIST CORROSION, ANODE CONNECTOR.

59
DRESSER 0091-1062-0014IN SERVICE SADDLE
SADDLE, SERVICE, 4IN X 1-1/2IN NPT TAP, CAST IRON PIPE, INSULATED SINGLE STRAP, DUCTILE IRON BODY, R UBBER COMPOUND GASKET FOR USE WITH NATURAL GAS. E -COATED, PLATED OR EPOXY COATED TO RESIST CORROSIO N, ANODE CONNECTOR

60
DRESSER 0088-0319-083 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/4IN FPT X 1IN CTS X 1-1 /2IN MPT, BLACK

61
DRESSER 0088-0320-083 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/2IN FPT X 1IN CTS X 1-1 /2IN MPT, BLACK

62
DRESSER 0088-0317-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 3/4IN FPT X 1/2IN CTS X 1IN MPT BLACK

63
DRESSER 0088-0318-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1IN FPT X 1/2IN CTS X 1IN MPT BLACK

64
DRESSER 0088-0338-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/4IN FPT X 1/2IN CTS X 1-1/4IN MPT, BLACK

65
DRESSER 0088-0326-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/2IN FPT X 1/2IN CTS X 1-1 /4IN MPT, BLACK

66
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

67
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

68
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

69
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

70
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

71
ELSTER PERFECTION 55701 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 4IN SADDLE WITH STAB TY PE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAINING PUNCH

72
ELSTER PERFECTION 55701 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 4IN SADDLE WITH STAB TY PE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAINING PUNCH

73
ELSTER PERFECTION 51562 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, 1/2IN CTS X 2IN SADDLE, HEAT FUSABLE PHILLIPS ROUND BASE, WITH 3/4IN COUPON RETAINING PUNCH AND STAB TYPE MECHANICAL OUTLET WITH .062IN FIXED INSERT, PE 3408

74
ELSTER/PERFECTION 50212 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, 1/2IN CTS X 8IN SADDLE HEAT FUSABLE PHILLIPS ROUND BASE, WITH 3/4IN COUPON RET AINING PUNCH AND STAB TYPE MECHANICAL OUTLET WITH .062IN FIXED INSERT, PE 3408

75
PA11 PLASTIC COMPRESSION CAP 1IN.
CAP, COMPRESSION, PLASTIC, PA11, 1IN. CTS WITH INSERT FOR .090 IN. WALL TUBING MUST MEET STRENGTH TEST REQUIRMENTS PER DOT 192

76
STYLE 62 STEEL COUPLING
COUPLING, 6IN X 4IN, 6.625IN O.D. STEEL TO 4.8IN O.D. CAST IRON, STYLE 62 WITH 27 ARMORED GASKETS

77
PERFORMANC 80F060000SIWNB PHILLIPS PE3408, DRIP FI
FITTING, DRIP, PHILLIPS PE3408, 1IN CTS WITH 6IN SADDLE BASE AND 3/4IN DROP PIPE, HEAT FUSABLE

78
DRESSER 0032-0030-208 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLT TYPE, INSULATING, 8IN (9.05IN OD) SEAL ONLY, CAST IRON X 8IN IPS STAB TYPE, WITH 7IN BARREL AT CAST IRON END AND ARMORED GASKET AT STEEL END COATED WITH 10 MILS OF EPOXY, MAXIMUM OPERATING PRESSURE 25 PSIG

79
DRESSER 0032-0007-208 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLT TYPE, INSULATING, 12IN (13.20IN OD) SEAL ONLY CAST IRON X 12IN IPS STAB TYPE, WITH 7IN BARREL AT CAST IRON END AND ARMORED GASKET AT STEEL END COATED WITH 10 MILS OF EPOXY,MAXIMUM OPERATING PRESSURE 25 PSIG

80
ELSTER PERFECTION 50520158 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 2 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

81
ELSTER PERFECTION 50520158 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 2 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

82
ELSTER PERFECTION 50520158 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 2 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

83
ELSTER PERFECTION 50520159 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 4 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

84
COPPERHEAD 1230Y-HS-1000 TRACER WIRE
WIRE, TRACER, CARBON STEEL, SOLID, 30V, 1C, #12. ANNEALED CARBON STEEL WITH COPPER CLAD, 30MIL HIGH DENSITY-HIGH MOLECULAR WEIGHT YELLOW POLYETHYLENE JACKET. IN COMPLIANCE WITH ASTM D-1248. TO BE SUPPLIED ON. 1000 FT SPOOL

85
BUFFGAUGE MINEUNCFB10040CV PNEUMATIC VALVE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 40 FEET OF CAPILLARY TUBE

86
DRESSER 0088-0318-108 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1IN FPT X 1/2IN CTS, 0.090 WALL, PE X 1IN MPT, BLACK

87
DRESSER 0088-0338-108 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/4IN FPT X 1/2IN CTS, 0. 090 WALL, PE X 1-14IN MPT, BLACK

88
LYONTEC 2INX4IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 2 IN X 4 IN

89
LYONTEC 2IN X 6IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 2 IN X 6 IN

90
LYONTEC 4IN X 6IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 4 IN X 6 IN

91
LYONTEC 4IN X 8IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 4 IN X 8 IN

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

National Grid Gas Line Material Auction

JBM Auction Management, Inc.

JBM Auction Management, Inc.


Contact:
Phone:
Sale Location
National Grid 4651 Crossroads Park,
Liverpool, NY 13088
Sale Dates and Times
Sale Terms and Conditions
Welcome to our Internet Auction. Be sure to Log In (Or REGISTER if this is your first visit) in order to bid. These items are located in Liverpool NY. Please use the contact person in each lot to setup appointments or to ask questions. While descriptions are believed to be accurate, information and quantities given by the Auction catalog, Auctioneer, owner, or other Auction personnel is offered only as a guide. Responsibility for proper nomenclature and identification of Auction merchandise is the responsibility of the bidder. Bidders are advised to inspect items prior to purchase. This is an absolute auction, everything sells to the last bidder! All Auction items are sold AS-IS, WHERE-IS, WITH ALL FAULTS and DEFECTS THEREIN. There is no guarantee as to merchantability by Auctioneer or Owner Buyer's premium of 15% will be charged on all items. Sales tax will be collected on all taxable items unless bidder has a valid exemption. All payments are to be made to JBM Management at the close of the auction. Items not paid for will result in loss of bidding privileges. Items not picked up by the pickup dates become the property of the auctioneer and will be disposed of as the auctioneer see fit. Please contact JBM Management with your questions and comments. Email - auctec14@gmail.com or phone - 585-739-6435 or Bert at 585-749-0022 Email at Bert@auctionsalesite.com
Listing Details
National Grid from time to time has excess materials and parts from their gas and electrical service companies. These parts and materials are brand new and stored away from the elements. Call for shipping questions

1
ELSTER PERFECTION 51219 PLASTIC ELBOW 1/2IN
 ELBOW, PLASTIC, 1/2IN CTS, 90 DEG, MECHANICAL STAB TYPE ENDS AND .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192 ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

2
FLANGE, SLIP-ON, 6IN IPS, RAISED FACE.
 FLANGE, SLIP-ON, 6IN IPS, RAISED FACE. CLASS 300. MAXIMUM OPERATING PRESSURE 740 PSI, DIMENSIONS AND DRILLING IN ACCORDANCE WITH ANSI B16.5. MATERIAL WITH ASTM A-105 OR ASTM A-181, GRADE II. IN COMPLIANCE WITH NMPC SYSTEM SPECIFICATION.

3
FLANGE, SLIP-ON, 8IN IPS, RAISED FACE. CLASS 300.
 FLANGE, SLIP-ON, 8IN IPS, RAISED FACE. CLASS 300. MAX OPER PRESSURE 740 PSI. DIMENSIONS AND DRILLING IN ACCORDANCE WITH ANSI B16.5. MATERIAL WITH ASTM A-105 OR ASTM A-181 GRADE II. IN COMPLIANCE TO NMPC SYSTEM SPECIFICATION G-1009, LATEST REVISION

4
FLANGE, SLIP-ON, 12IN IPS, RAISED FACE. CLASS 300
 FLANGE, SLIP-ON, 12IN IPS, RAISED FACE. CLASS 300. MAX OPER PRESSURE 740 PSI. DIMENSIONS AND DRILLING IN ACCORDANCE WITH ANSI B16.5. MATERIAL WITH ASTM A-105 OR ASTM A-181, GRADE II. IN COMPLIANCE TONMPC SYSTEM SPECIFICATION G-1009, LATEST REVISION

5
FLANGE, 2 INCH, RAISED FACE, 300# CLASS,
 FLANGE, 2 INCH, RAISED FACE, 300# CLASS, WELD NECK, STEEL, STANDARD BORE, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

6
FLANGE, 2IN, BLIND, RAISED FACE, 300#
FLANGE, 2IN, BLIND, RAISED FACE, 300# CLASS, STEEL, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

7
FLANGE, 4 INCH, BLIND, RAISED FACE, 300# CLASS,
FLANGE, 4 INCH, BLIND, RAISED FACE, 300# CLASS, STEEL, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

8
FLANGE, 6 INCH, BLIND, RAISED FACE, 300#
FLANGE, 6 INCH, BLIND, RAISED FACE, 300# CLASS, STEEL, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

9
FLANGE, BLIND, 8IN IPS, CLASS 300 RAISED FACE,
FLANGE, BLIND, 8IN IPS, CLASS 300 RAISED FACE, MAXIMUM OPERATING PRESSURE 740 PSI, FORGED CARBON STEEL IN COMPLIANCE WITH ANSI B16.5 AND ASTM A-105, NMPC SYSTEM SPECIFICATION G-1009, LATEST REVISION

10
UMAC VALVE, EXCESS FLOW, FOR 1/2IN CTS, P3225087
VALVE, EXCESS FLOW, FOR 1/2IN CTS, .062 WALL, STICK, HD PE 3408, 10IN LONG

11
ELSTER PERFECTION 51564 VALVE, 1/2IN CTS,
VALVE, EXCESS FLOW, FOR 1/2IN CTS, .062 WALL, STICK, HD PE 3408, 10IN LONG

12
ELSTER PERFECTION 51564 VALVE, 1/2IN CTS,
VALVE, EXCESS FLOW, FOR 1/2IN CTS, .062 WALL, STICK, HD PE 3408, 10IN LONG

13
ELSTER PERFECTION 518-060-90 VALVE
VALVE, EXCESS FLOW, FOR 1IN CTS WITH .090IN INSERT STIFFENER, TYPE PE 3408 MATERIAL, STICK TYPE, ORANGE LABEL 700, INSTALLED IN A PERFECTION PARMASET COUPLING WITH DIRECTION LABEL FOR ATTACHMENT TO RISER

14
ELSTER PERFECTION 518-060-90 VALVE
VALVE, EXCESS FLOW, FOR 1IN CTS WITH .090IN INSERT STIFFENER, TYPE PE 3408 MATERIAL, STICK TYPE, ORANGE LABEL 700, INSTALLED IN A PERFECTION PARMASET COUPLING WITH DIRECTION LABEL FOR ATTACHMENT TO RISER

15
ELSTER PERFECTION 51761 Plastic TEE 1/2IN CTS
Plastic TEE 1/2IN CTS, THREE WAY, MECHANICAL STABTYPE ENDS AND .062IN WALL PE INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

16
ELSTER PERFECTION 50309 ELBOW
ELBOW, 90 DEG, PLASTIC, 2IN IPS, MECHANICAL STAB T YPE ENDS AND INSERT STIFFENERS FOR 2IN SDR 11 PE P IPE, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 A ND HAVE A M.O.P. RATING TO 100 PSI

17
DRESSER 0731-0010-001 COMPRESSION CAP
CAP, COMPRESSION, RESTRAINT, 6IN IPS STEEL, BOLTED , WITH 1IN VENT, EPOXY COATED, ANODE CLIP, E-COAT GRIP RINGS

18
DRESSER 0731-0032-001 COMPRESSION CAP
CAP, COMPRESSION, RESTRAINT, 6IN IPS STEEL, BOLTED , WITH 1IN VENT, EPOXY COATED, ANODE CLIP, E-COAT GRIP RINGS

19
ELSTER PERFECTION 51941 TAPPING TEE ELECTROFUSION
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

20
ELSTER PERFECTION 51941 TAPPING TEE ELECTROFUSION
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

21
ELSTER PERFECTION 51942 TAPPING TEE ELECTROFUSIO
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

22
ELSTER PERFECTION 51942 TAPPING TEE ELECTROFUSION
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

23
ELSTER/PERFECTION 50520136 TAPPING TEE ELCTROFUSIO
TEE, TAPPING, ELECTROFUSION, 1IN CTS(0.090IN INSER T) X 6IN SADDLE, PE 100/4710, STAB TYPE OUTLET WIT H FIXED INSERT, EF D2513/F1055

24
ELSTER/PERFECTION 50520136 TAPPING TEE ELCTROFUSIO
TEE, TAPPING, ELECTROFUSION, 1IN CTS(0.090IN INSER T) X 6IN SADDLE, PE 100/4710, STAB TYPE OUTLET WIT H FIXED INSERT, EF D2513/F1055

25
ELSTER PERFECTION 51686 PLASTIC TEE
TEE, PLASTIC SERVICE, 1/2IN CTS X 12IN RECTANGULAR BASE SADDLE, HEAT FUSABLE PE 3408, WITH .8IN COUPON RETAINING PUNCH AND STAB TYPE MECHANICAL OUTLET WITH .062IN FIXED INSERT

26
BUFFGAUGE MNEU-NC-100-20-1-CV PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE

27
BUFFGAUGE MNEU-NC-100-20-1-CV PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE

28
BUFFGAUGE MNEU-NC-100-20-1-CV PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE

29
BUFFGAUGE MNEU-NC-B-B-075-20 PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 3/4IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE.

30
BUFFGAUGE MNEU-NC-B-B-075-20 PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 3/4IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE.

31
MERCO VALVE , 1-1/4IN
VALVE, MERCO, 1-1/4IN

32
MERCO N0114 3/4 VALVE
MERCO N0114 3/4 VALVE

33
WALWORTH 4in.END VALVE
WALWORTH 4in.END VALVE

34
DRESSER, COUPLING 0039-0024-215, 2IN, STYLE 39
DRESSER, COUPLING 0039-0024-215, 2IN, STYLE 39

35
PERFECTION CORP 55471 MECHANICAL TEE
PERFECTION CORP 55471 MECHANICAL TEE TAP 6IN X 1-1/4IN IPS

36
MERCO VALVE, 1-1/2IN, 114
VALVE, MERCO, 1-1/2IN, 114

37
DRESSER 0038-0255-334 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLTED, CAST IRON PIPE, 12IN SEAL ONLY, DISSEMBLED TYPE WITH 7IN STEEL BODY AND PLAIN GASKETS (13.20IN O.D.) MAXIMUM OPERATING PRESSURE 25 PSIG

38
DRESSER 0038-0255-334 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLTED, CAST IRON PIPE, 12IN SEAL ONLY, DISSEMBLED TYPE WITH 7IN STEEL BODY AND PLAIN GASKETS (13.20IN O.D.) MAXIMUM OPERATING PRESSURE 25 PSIG

39
DRESSER 0090-5619-677 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, INSULATED, REDUC ING, 1-1/4IN IPS STEEL X 1IN CTS, NUT TYPE, E-COAT , ANODE CLIP

40
DRESSER 0090-5626-677 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, INSULATED, REDUC ING, 1-1/2IN IPS STEEL X 1IN CTS, NUT TYPE, E-COAT , ANODE CLIP

41
DRESSER 00389099201 COMPRESSION COUPLING
COUPLING, COMPRESSION, CONDUCTIVE, BOLT TYPE, 12INCH, RESTRAINT, WITH ARMORED GASKETS, FOR STEEL TO STEEL, WITH 7IN BARREL, COATED WITH 10 MILS OF EPOXY, MAXIMUM OPERATING PRESSURE 300 PSIG

42
WELDNECK 8IN IPS FLANGE
FLANGE, WELDNECK, 8IN IPS, RAISED FACE, CLASS 300 MAXIMUM OPERATING PRESSURE 740 PSI, DIMENNSIONS AN D DRILLING TO BE IN ACCORDANCE WITH ANSI B16.5, MA TERIAL WITH ASTM A-105 OR ASTM A-181 GRADE II, NMP C SYSTEM SPECIFICATION G-1009, LATEST REVISION

43
ELSTER PERFECTION 50101 PLASTIC COUPLING
COUPLING, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE ENDS WITH TWO .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

44
ELSTER PERFECTION 50101 PLASTIC COUPLING
COUPLING, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE ENDS WITH TWO .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

45
ELSTER PERFECTION 50101 PLASTIC COUPLING
COUPLING, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE ENDS WITH TWO .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

46
ELSTER PERFECTION 51561PLASTIC COUPLING
COUPLING, PLASTIC, REDUCING, 1IN CTS X 1/2IN CTS M ECHANICAL STAB TYPE ENDS WITH .090IN, .062IN WALL INSERTS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D25 13 AND HAVE A M.O.P. RATING TO 100 PSI

47
ELSTER PERFECTION 51561PLASTIC COUPLING
COUPLING, PLASTIC, REDUCING, 1IN CTS X 1/2IN CTS M ECHANICAL STAB TYPE ENDS WITH .090IN, .062IN WALL INSERTS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D25 13 AND HAVE A M.O.P. RATING TO 100 PSI

48
ELSTER PERFECTION 51561PLASTIC COUPLING
COUPLING, PLASTIC, REDUCING, 1IN CTS X 1/2IN CTS M ECHANICAL STAB TYPE ENDS WITH .090IN, .062IN WALL INSERTS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D25 13 AND HAVE A M.O.P. RATING TO 100 PSI

49
SMITHBLAIR EZ48A7136068 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, CONDUCTIVE, 4IN IPS STEEL X 4IN IPS STEEL/PE, BOLTED, EPOXY COAT, ANODE CLIP, E-COAT GRIP RINGS

50
SMITHBLAIR EZ68A715362811 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, CONDUCTIVE, 6IN IPS STEEL X 6IN IPS STEEL/PE, BOLTED, EPOXY COAT, ANODE CLIP, E-COAT GRIP RINGS

51
90 DEGREE IRON ELBOW 1-1/4 INCH
ELBOW, IRON, MALLEABLE, STREET, THREADED, 90 DEG CLASS 300, 1-1/4INCH, MATERIAL TO ANSI 16.3, STANDARD TAPER PIPE, THREADS TO ANSI B1.20.1

52
ELSTER PERFECTION 50048 CAP END
CAP, PE, 1IN CTS, 0.090/0.099/0.102, MECHANICAL, P E100, BLIND END, UNIVERSAL CTS OUTLETS, BOTH ENDS FUNCTIONAL, ONE END OPEN, ONE END COVERED BY REMOV EABLE CAP, TO BE MANUFACTURED IN ACCORDANCE WITH S PEC MATL 3030, W/NO REGRIND

53
ELSTER PERFECTION 50011 PLASTIC CAP 1/2IN
CAP, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE W/.06 2IN WALL INSERT STIFFENER, MUST BE CERTIFIED TO D. O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 1 00 PSI

54
ELSTER PERFECTION 50011 PLASTIC CAP 1/2IN
CAP, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE W/.06 2IN WALL INSERT STIFFENER, MUST BE CERTIFIED TO D. O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 1 00 PSI

55
DRESSER 0073-0003-001 REPAIR SLEEVE DUCTILE IRON
SLEEVE, REPAIR, 3IN DUCTILE IRON FOR STEEL PIPE COUPLING WITH 1-1/4IN THREADED VENT AND PLUG, FOR REPAIRING THREADED COUPLINGS.

56
DRESSER 8IN SPLIT TYPE SLEEVE
SLEEVE, STEEL PIPE, CAST STEEL, 8IN SPLIT TYPE DRE SSER 73

57
DRESSER 01600012206 CLAMP
CLAMP, BELL JOINT, CAST IRON, 8IN (9.05IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION

58
SMITH-BLAIR/CSI 31400048008000 SERVICE SADDLE 4IN
SADDLE, SERVICE, 4 X 1IN NPT TAP, CAST IRON PIPE, INSULATED DOUBLE STRAP TYPE, DUCTILE IRON BODY, RU BBER COMPOUND GASKET FOR USE WITH NATURAL GAS, E-C OATED, PLATED OR EPOXY COATED TO RESIST CORROSION, ANODE CONNECTOR.

59
DRESSER 0091-1062-0014IN SERVICE SADDLE
SADDLE, SERVICE, 4IN X 1-1/2IN NPT TAP, CAST IRON PIPE, INSULATED SINGLE STRAP, DUCTILE IRON BODY, R UBBER COMPOUND GASKET FOR USE WITH NATURAL GAS. E -COATED, PLATED OR EPOXY COATED TO RESIST CORROSIO N, ANODE CONNECTOR

60
DRESSER 0088-0319-083 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/4IN FPT X 1IN CTS X 1-1 /2IN MPT, BLACK

61
DRESSER 0088-0320-083 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/2IN FPT X 1IN CTS X 1-1 /2IN MPT, BLACK

62
DRESSER 0088-0317-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 3/4IN FPT X 1/2IN CTS X 1IN MPT BLACK

63
DRESSER 0088-0318-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1IN FPT X 1/2IN CTS X 1IN MPT BLACK

64
DRESSER 0088-0338-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/4IN FPT X 1/2IN CTS X 1-1/4IN MPT, BLACK

65
DRESSER 0088-0326-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/2IN FPT X 1/2IN CTS X 1-1 /4IN MPT, BLACK

66
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

67
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

68
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

69
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

70
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

71
ELSTER PERFECTION 55701 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 4IN SADDLE WITH STAB TY PE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAINING PUNCH

72
ELSTER PERFECTION 55701 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 4IN SADDLE WITH STAB TY PE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAINING PUNCH

73
ELSTER PERFECTION 51562 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, 1/2IN CTS X 2IN SADDLE, HEAT FUSABLE PHILLIPS ROUND BASE, WITH 3/4IN COUPON RETAINING PUNCH AND STAB TYPE MECHANICAL OUTLET WITH .062IN FIXED INSERT, PE 3408

74
ELSTER/PERFECTION 50212 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, 1/2IN CTS X 8IN SADDLE HEAT FUSABLE PHILLIPS ROUND BASE, WITH 3/4IN COUPON RET AINING PUNCH AND STAB TYPE MECHANICAL OUTLET WITH .062IN FIXED INSERT, PE 3408

75
PA11 PLASTIC COMPRESSION CAP 1IN.
CAP, COMPRESSION, PLASTIC, PA11, 1IN. CTS WITH INSERT FOR .090 IN. WALL TUBING MUST MEET STRENGTH TEST REQUIRMENTS PER DOT 192

76
STYLE 62 STEEL COUPLING
COUPLING, 6IN X 4IN, 6.625IN O.D. STEEL TO 4.8IN O.D. CAST IRON, STYLE 62 WITH 27 ARMORED GASKETS

77
PERFORMANC 80F060000SIWNB PHILLIPS PE3408, DRIP FI
FITTING, DRIP, PHILLIPS PE3408, 1IN CTS WITH 6IN SADDLE BASE AND 3/4IN DROP PIPE, HEAT FUSABLE

78
DRESSER 0032-0030-208 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLT TYPE, INSULATING, 8IN (9.05IN OD) SEAL ONLY, CAST IRON X 8IN IPS STAB TYPE, WITH 7IN BARREL AT CAST IRON END AND ARMORED GASKET AT STEEL END COATED WITH 10 MILS OF EPOXY, MAXIMUM OPERATING PRESSURE 25 PSIG

79
DRESSER 0032-0007-208 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLT TYPE, INSULATING, 12IN (13.20IN OD) SEAL ONLY CAST IRON X 12IN IPS STAB TYPE, WITH 7IN BARREL AT CAST IRON END AND ARMORED GASKET AT STEEL END COATED WITH 10 MILS OF EPOXY,MAXIMUM OPERATING PRESSURE 25 PSIG

80
ELSTER PERFECTION 50520158 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 2 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

81
ELSTER PERFECTION 50520158 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 2 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

82
ELSTER PERFECTION 50520158 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 2 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

83
ELSTER PERFECTION 50520159 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 4 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

84
COPPERHEAD 1230Y-HS-1000 TRACER WIRE
WIRE, TRACER, CARBON STEEL, SOLID, 30V, 1C, #12. ANNEALED CARBON STEEL WITH COPPER CLAD, 30MIL HIGH DENSITY-HIGH MOLECULAR WEIGHT YELLOW POLYETHYLENE JACKET. IN COMPLIANCE WITH ASTM D-1248. TO BE SUPPLIED ON. 1000 FT SPOOL

85
BUFFGAUGE MINEUNCFB10040CV PNEUMATIC VALVE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 40 FEET OF CAPILLARY TUBE

86
DRESSER 0088-0318-108 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1IN FPT X 1/2IN CTS, 0.090 WALL, PE X 1IN MPT, BLACK

87
DRESSER 0088-0338-108 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/4IN FPT X 1/2IN CTS, 0. 090 WALL, PE X 1-14IN MPT, BLACK

88
LYONTEC 2INX4IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 2 IN X 4 IN

89
LYONTEC 2IN X 6IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 2 IN X 6 IN

90
LYONTEC 4IN X 6IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 4 IN X 6 IN

91
LYONTEC 4IN X 8IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 4 IN X 8 IN

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
National Grid Gas Line Material Auction
 Online Only Auction
Auction Date(s)
Bidding Starts: Friday Sep 28
Bidding Ends: Tuesday Oct 23
Auction Location

Liverpool, NY 13088
Company
JBM Auction Management, Inc.

Website: jbmmanagement.com

Listing Terms and Conditions
Welcome to our Internet Auction. Be sure to Log In (Or REGISTER if this is your first visit) in order to bid. These items are located in Liverpool NY. Please use the contact person in each lot to setup appointments or to ask questions. While descriptions are believed to be accurate, information and quantities given by the Auction catalog, Auctioneer, owner, or other Auction personnel is offered only as a guide. Responsibility for proper nomenclature and identification of Auction merchandise is the responsibility of the bidder. Bidders are advised to inspect items prior to purchase. This is an absolute auction, everything sells to the last bidder! All Auction items are sold AS-IS, WHERE-IS, WITH ALL FAULTS and DEFECTS THEREIN. There is no guarantee as to merchantability by Auctioneer or Owner Buyer's premium of 15% will be charged on all items. Sales tax will be collected on all taxable items unless bidder has a valid exemption. All payments are to be made to JBM Management at the close of the auction. Items not paid for will result in loss of bidding privileges. Items not picked up by the pickup dates become the property of the auctioneer and will be disposed of as the auctioneer see fit. Please contact JBM Management with your questions and comments. Email - auctec14@gmail.com or phone - 585-739-6435 or Bert at 585-749-0022 Email at Bert@auctionsalesite.com
National Grid from time to time has excess materials and parts from their gas and electrical service companies. These parts and materials are brand new and stored away from the elements. Call for shipping questions

1
ELSTER PERFECTION 51219 PLASTIC ELBOW 1/2IN
 ELBOW, PLASTIC, 1/2IN CTS, 90 DEG, MECHANICAL STAB TYPE ENDS AND .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192 ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

2
FLANGE, SLIP-ON, 6IN IPS, RAISED FACE.
 FLANGE, SLIP-ON, 6IN IPS, RAISED FACE. CLASS 300. MAXIMUM OPERATING PRESSURE 740 PSI, DIMENSIONS AND DRILLING IN ACCORDANCE WITH ANSI B16.5. MATERIAL WITH ASTM A-105 OR ASTM A-181, GRADE II. IN COMPLIANCE WITH NMPC SYSTEM SPECIFICATION.

3
FLANGE, SLIP-ON, 8IN IPS, RAISED FACE. CLASS 300.
 FLANGE, SLIP-ON, 8IN IPS, RAISED FACE. CLASS 300. MAX OPER PRESSURE 740 PSI. DIMENSIONS AND DRILLING IN ACCORDANCE WITH ANSI B16.5. MATERIAL WITH ASTM A-105 OR ASTM A-181 GRADE II. IN COMPLIANCE TO NMPC SYSTEM SPECIFICATION G-1009, LATEST REVISION

4
FLANGE, SLIP-ON, 12IN IPS, RAISED FACE. CLASS 300
 FLANGE, SLIP-ON, 12IN IPS, RAISED FACE. CLASS 300. MAX OPER PRESSURE 740 PSI. DIMENSIONS AND DRILLING IN ACCORDANCE WITH ANSI B16.5. MATERIAL WITH ASTM A-105 OR ASTM A-181, GRADE II. IN COMPLIANCE TONMPC SYSTEM SPECIFICATION G-1009, LATEST REVISION

5
FLANGE, 2 INCH, RAISED FACE, 300# CLASS,
 FLANGE, 2 INCH, RAISED FACE, 300# CLASS, WELD NECK, STEEL, STANDARD BORE, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

6
FLANGE, 2IN, BLIND, RAISED FACE, 300#
FLANGE, 2IN, BLIND, RAISED FACE, 300# CLASS, STEEL, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

7
FLANGE, 4 INCH, BLIND, RAISED FACE, 300# CLASS,
FLANGE, 4 INCH, BLIND, RAISED FACE, 300# CLASS, STEEL, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

8
FLANGE, 6 INCH, BLIND, RAISED FACE, 300#
FLANGE, 6 INCH, BLIND, RAISED FACE, 300# CLASS, STEEL, PER ASTM A-350 GRADE LF2 AND NATIONAL GRID SPECIFICATION MATL-3120

9
FLANGE, BLIND, 8IN IPS, CLASS 300 RAISED FACE,
FLANGE, BLIND, 8IN IPS, CLASS 300 RAISED FACE, MAXIMUM OPERATING PRESSURE 740 PSI, FORGED CARBON STEEL IN COMPLIANCE WITH ANSI B16.5 AND ASTM A-105, NMPC SYSTEM SPECIFICATION G-1009, LATEST REVISION

10
UMAC VALVE, EXCESS FLOW, FOR 1/2IN CTS, P3225087
VALVE, EXCESS FLOW, FOR 1/2IN CTS, .062 WALL, STICK, HD PE 3408, 10IN LONG

11
ELSTER PERFECTION 51564 VALVE, 1/2IN CTS,
VALVE, EXCESS FLOW, FOR 1/2IN CTS, .062 WALL, STICK, HD PE 3408, 10IN LONG

12
ELSTER PERFECTION 51564 VALVE, 1/2IN CTS,
VALVE, EXCESS FLOW, FOR 1/2IN CTS, .062 WALL, STICK, HD PE 3408, 10IN LONG

13
ELSTER PERFECTION 518-060-90 VALVE
VALVE, EXCESS FLOW, FOR 1IN CTS WITH .090IN INSERT STIFFENER, TYPE PE 3408 MATERIAL, STICK TYPE, ORANGE LABEL 700, INSTALLED IN A PERFECTION PARMASET COUPLING WITH DIRECTION LABEL FOR ATTACHMENT TO RISER

14
ELSTER PERFECTION 518-060-90 VALVE
VALVE, EXCESS FLOW, FOR 1IN CTS WITH .090IN INSERT STIFFENER, TYPE PE 3408 MATERIAL, STICK TYPE, ORANGE LABEL 700, INSTALLED IN A PERFECTION PARMASET COUPLING WITH DIRECTION LABEL FOR ATTACHMENT TO RISER

15
ELSTER PERFECTION 51761 Plastic TEE 1/2IN CTS
Plastic TEE 1/2IN CTS, THREE WAY, MECHANICAL STABTYPE ENDS AND .062IN WALL PE INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

16
ELSTER PERFECTION 50309 ELBOW
ELBOW, 90 DEG, PLASTIC, 2IN IPS, MECHANICAL STAB T YPE ENDS AND INSERT STIFFENERS FOR 2IN SDR 11 PE P IPE, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 A ND HAVE A M.O.P. RATING TO 100 PSI

17
DRESSER 0731-0010-001 COMPRESSION CAP
CAP, COMPRESSION, RESTRAINT, 6IN IPS STEEL, BOLTED , WITH 1IN VENT, EPOXY COATED, ANODE CLIP, E-COAT GRIP RINGS

18
DRESSER 0731-0032-001 COMPRESSION CAP
CAP, COMPRESSION, RESTRAINT, 6IN IPS STEEL, BOLTED , WITH 1IN VENT, EPOXY COATED, ANODE CLIP, E-COAT GRIP RINGS

19
ELSTER PERFECTION 51941 TAPPING TEE ELECTROFUSION
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

20
ELSTER PERFECTION 51941 TAPPING TEE ELECTROFUSION
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

21
ELSTER PERFECTION 51942 TAPPING TEE ELECTROFUSIO
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

22
ELSTER PERFECTION 51942 TAPPING TEE ELECTROFUSION
TEE, TAPPING, ELECTROFUSION, 1/2IN CTS (.062IN INSERT) X 6IN SADDLE, HIGH VOLUME, PE 2406, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT, SDR11, EF D2513/F1055, CE B137.4.1 CSA

23
ELSTER/PERFECTION 50520136 TAPPING TEE ELCTROFUSIO
TEE, TAPPING, ELECTROFUSION, 1IN CTS(0.090IN INSER T) X 6IN SADDLE, PE 100/4710, STAB TYPE OUTLET WIT H FIXED INSERT, EF D2513/F1055

24
ELSTER/PERFECTION 50520136 TAPPING TEE ELCTROFUSIO
TEE, TAPPING, ELECTROFUSION, 1IN CTS(0.090IN INSER T) X 6IN SADDLE, PE 100/4710, STAB TYPE OUTLET WIT H FIXED INSERT, EF D2513/F1055

25
ELSTER PERFECTION 51686 PLASTIC TEE
TEE, PLASTIC SERVICE, 1/2IN CTS X 12IN RECTANGULAR BASE SADDLE, HEAT FUSABLE PE 3408, WITH .8IN COUPON RETAINING PUNCH AND STAB TYPE MECHANICAL OUTLET WITH .062IN FIXED INSERT

26
BUFFGAUGE MNEU-NC-100-20-1-CV PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE

27
BUFFGAUGE MNEU-NC-100-20-1-CV PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE

28
BUFFGAUGE MNEU-NC-100-20-1-CV PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE

29
BUFFGAUGE MNEU-NC-B-B-075-20 PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 3/4IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE.

30
BUFFGAUGE MNEU-NC-B-B-075-20 PNEUMATIC VALUE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 3/4IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE.

31
MERCO VALVE , 1-1/4IN
VALVE, MERCO, 1-1/4IN

32
MERCO N0114 3/4 VALVE
MERCO N0114 3/4 VALVE

33
WALWORTH 4in.END VALVE
WALWORTH 4in.END VALVE

34
DRESSER, COUPLING 0039-0024-215, 2IN, STYLE 39
DRESSER, COUPLING 0039-0024-215, 2IN, STYLE 39

35
PERFECTION CORP 55471 MECHANICAL TEE
PERFECTION CORP 55471 MECHANICAL TEE TAP 6IN X 1-1/4IN IPS

36
MERCO VALVE, 1-1/2IN, 114
VALVE, MERCO, 1-1/2IN, 114

37
DRESSER 0038-0255-334 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLTED, CAST IRON PIPE, 12IN SEAL ONLY, DISSEMBLED TYPE WITH 7IN STEEL BODY AND PLAIN GASKETS (13.20IN O.D.) MAXIMUM OPERATING PRESSURE 25 PSIG

38
DRESSER 0038-0255-334 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLTED, CAST IRON PIPE, 12IN SEAL ONLY, DISSEMBLED TYPE WITH 7IN STEEL BODY AND PLAIN GASKETS (13.20IN O.D.) MAXIMUM OPERATING PRESSURE 25 PSIG

39
DRESSER 0090-5619-677 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, INSULATED, REDUC ING, 1-1/4IN IPS STEEL X 1IN CTS, NUT TYPE, E-COAT , ANODE CLIP

40
DRESSER 0090-5626-677 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, INSULATED, REDUC ING, 1-1/2IN IPS STEEL X 1IN CTS, NUT TYPE, E-COAT , ANODE CLIP

41
DRESSER 00389099201 COMPRESSION COUPLING
COUPLING, COMPRESSION, CONDUCTIVE, BOLT TYPE, 12INCH, RESTRAINT, WITH ARMORED GASKETS, FOR STEEL TO STEEL, WITH 7IN BARREL, COATED WITH 10 MILS OF EPOXY, MAXIMUM OPERATING PRESSURE 300 PSIG

42
WELDNECK 8IN IPS FLANGE
FLANGE, WELDNECK, 8IN IPS, RAISED FACE, CLASS 300 MAXIMUM OPERATING PRESSURE 740 PSI, DIMENNSIONS AN D DRILLING TO BE IN ACCORDANCE WITH ANSI B16.5, MA TERIAL WITH ASTM A-105 OR ASTM A-181 GRADE II, NMP C SYSTEM SPECIFICATION G-1009, LATEST REVISION

43
ELSTER PERFECTION 50101 PLASTIC COUPLING
COUPLING, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE ENDS WITH TWO .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

44
ELSTER PERFECTION 50101 PLASTIC COUPLING
COUPLING, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE ENDS WITH TWO .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

45
ELSTER PERFECTION 50101 PLASTIC COUPLING
COUPLING, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE ENDS WITH TWO .062IN WALL INSERT STIFFENERS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI

46
ELSTER PERFECTION 51561PLASTIC COUPLING
COUPLING, PLASTIC, REDUCING, 1IN CTS X 1/2IN CTS M ECHANICAL STAB TYPE ENDS WITH .090IN, .062IN WALL INSERTS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D25 13 AND HAVE A M.O.P. RATING TO 100 PSI

47
ELSTER PERFECTION 51561PLASTIC COUPLING
COUPLING, PLASTIC, REDUCING, 1IN CTS X 1/2IN CTS M ECHANICAL STAB TYPE ENDS WITH .090IN, .062IN WALL INSERTS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D25 13 AND HAVE A M.O.P. RATING TO 100 PSI

48
ELSTER PERFECTION 51561PLASTIC COUPLING
COUPLING, PLASTIC, REDUCING, 1IN CTS X 1/2IN CTS M ECHANICAL STAB TYPE ENDS WITH .090IN, .062IN WALL INSERTS, MUST BE CERTIFIED TO D.O.T. 192, ASTM D25 13 AND HAVE A M.O.P. RATING TO 100 PSI

49
SMITHBLAIR EZ48A7136068 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, CONDUCTIVE, 4IN IPS STEEL X 4IN IPS STEEL/PE, BOLTED, EPOXY COAT, ANODE CLIP, E-COAT GRIP RINGS

50
SMITHBLAIR EZ68A715362811 COMPRESSION COUPLING
COUPLING, COMPRESSION, RESTRAINT, CONDUCTIVE, 6IN IPS STEEL X 6IN IPS STEEL/PE, BOLTED, EPOXY COAT, ANODE CLIP, E-COAT GRIP RINGS

51
90 DEGREE IRON ELBOW 1-1/4 INCH
ELBOW, IRON, MALLEABLE, STREET, THREADED, 90 DEG CLASS 300, 1-1/4INCH, MATERIAL TO ANSI 16.3, STANDARD TAPER PIPE, THREADS TO ANSI B1.20.1

52
ELSTER PERFECTION 50048 CAP END
CAP, PE, 1IN CTS, 0.090/0.099/0.102, MECHANICAL, P E100, BLIND END, UNIVERSAL CTS OUTLETS, BOTH ENDS FUNCTIONAL, ONE END OPEN, ONE END COVERED BY REMOV EABLE CAP, TO BE MANUFACTURED IN ACCORDANCE WITH S PEC MATL 3030, W/NO REGRIND

53
ELSTER PERFECTION 50011 PLASTIC CAP 1/2IN
CAP, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE W/.06 2IN WALL INSERT STIFFENER, MUST BE CERTIFIED TO D. O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 1 00 PSI

54
ELSTER PERFECTION 50011 PLASTIC CAP 1/2IN
CAP, PLASTIC, 1/2IN CTS MECHANICAL STAB TYPE W/.06 2IN WALL INSERT STIFFENER, MUST BE CERTIFIED TO D. O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 1 00 PSI

55
DRESSER 0073-0003-001 REPAIR SLEEVE DUCTILE IRON
SLEEVE, REPAIR, 3IN DUCTILE IRON FOR STEEL PIPE COUPLING WITH 1-1/4IN THREADED VENT AND PLUG, FOR REPAIRING THREADED COUPLINGS.

56
DRESSER 8IN SPLIT TYPE SLEEVE
SLEEVE, STEEL PIPE, CAST STEEL, 8IN SPLIT TYPE DRE SSER 73

57
DRESSER 01600012206 CLAMP
CLAMP, BELL JOINT, CAST IRON, 8IN (9.05IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION

58
SMITH-BLAIR/CSI 31400048008000 SERVICE SADDLE 4IN
SADDLE, SERVICE, 4 X 1IN NPT TAP, CAST IRON PIPE, INSULATED DOUBLE STRAP TYPE, DUCTILE IRON BODY, RU BBER COMPOUND GASKET FOR USE WITH NATURAL GAS, E-C OATED, PLATED OR EPOXY COATED TO RESIST CORROSION, ANODE CONNECTOR.

59
DRESSER 0091-1062-0014IN SERVICE SADDLE
SADDLE, SERVICE, 4IN X 1-1/2IN NPT TAP, CAST IRON PIPE, INSULATED SINGLE STRAP, DUCTILE IRON BODY, R UBBER COMPOUND GASKET FOR USE WITH NATURAL GAS. E -COATED, PLATED OR EPOXY COATED TO RESIST CORROSIO N, ANODE CONNECTOR

60
DRESSER 0088-0319-083 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/4IN FPT X 1IN CTS X 1-1 /2IN MPT, BLACK

61
DRESSER 0088-0320-083 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/2IN FPT X 1IN CTS X 1-1 /2IN MPT, BLACK

62
DRESSER 0088-0317-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 3/4IN FPT X 1/2IN CTS X 1IN MPT BLACK

63
DRESSER 0088-0318-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1IN FPT X 1/2IN CTS X 1IN MPT BLACK

64
DRESSER 0088-0338-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/4IN FPT X 1/2IN CTS X 1-1/4IN MPT, BLACK

65
DRESSER 0088-0326-136 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/2IN FPT X 1/2IN CTS X 1-1 /4IN MPT, BLACK

66
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

67
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

68
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

69
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

70
ELSTER PERFECTION 55700 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 2IN SADDLE, WITH STAB T YPE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAININ G PUNCH

71
ELSTER PERFECTION 55701 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 4IN SADDLE WITH STAB TY PE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAINING PUNCH

72
ELSTER PERFECTION 55701 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, MECHANICAL BOLT ON SADDLE, 1 /2IN CTS (.062IN INSERT) X 4IN SADDLE WITH STAB TY PE OUTLET AND FIXED INSERT, 3/4IN COUPON RETAINING PUNCH

73
ELSTER PERFECTION 51562 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, 1/2IN CTS X 2IN SADDLE, HEAT FUSABLE PHILLIPS ROUND BASE, WITH 3/4IN COUPON RETAINING PUNCH AND STAB TYPE MECHANICAL OUTLET WITH .062IN FIXED INSERT, PE 3408

74
ELSTER/PERFECTION 50212 PLASTIC TEE SERVICE
TEE, PLASTIC SERVICE, 1/2IN CTS X 8IN SADDLE HEAT FUSABLE PHILLIPS ROUND BASE, WITH 3/4IN COUPON RET AINING PUNCH AND STAB TYPE MECHANICAL OUTLET WITH .062IN FIXED INSERT, PE 3408

75
PA11 PLASTIC COMPRESSION CAP 1IN.
CAP, COMPRESSION, PLASTIC, PA11, 1IN. CTS WITH INSERT FOR .090 IN. WALL TUBING MUST MEET STRENGTH TEST REQUIRMENTS PER DOT 192

76
STYLE 62 STEEL COUPLING
COUPLING, 6IN X 4IN, 6.625IN O.D. STEEL TO 4.8IN O.D. CAST IRON, STYLE 62 WITH 27 ARMORED GASKETS

77
PERFORMANC 80F060000SIWNB PHILLIPS PE3408, DRIP FI
FITTING, DRIP, PHILLIPS PE3408, 1IN CTS WITH 6IN SADDLE BASE AND 3/4IN DROP PIPE, HEAT FUSABLE

78
DRESSER 0032-0030-208 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLT TYPE, INSULATING, 8IN (9.05IN OD) SEAL ONLY, CAST IRON X 8IN IPS STAB TYPE, WITH 7IN BARREL AT CAST IRON END AND ARMORED GASKET AT STEEL END COATED WITH 10 MILS OF EPOXY, MAXIMUM OPERATING PRESSURE 25 PSIG

79
DRESSER 0032-0007-208 COMPRESSION COUPLING
COUPLING, COMPRESSION, BOLT TYPE, INSULATING, 12IN (13.20IN OD) SEAL ONLY CAST IRON X 12IN IPS STAB TYPE, WITH 7IN BARREL AT CAST IRON END AND ARMORED GASKET AT STEEL END COATED WITH 10 MILS OF EPOXY,MAXIMUM OPERATING PRESSURE 25 PSIG

80
ELSTER PERFECTION 50520158 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 2 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

81
ELSTER PERFECTION 50520158 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 2 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

82
ELSTER PERFECTION 50520158 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 2 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

83
ELSTER PERFECTION 50520159 ELECTROFUSION TAPPING T
TEE, TAPPING, ELECTROFUSION, 1/2 INCH CTS (.062 INCH INSERT) X 4 INCH SADDLE, PE 3408, YELLOW, FUSAMATIC, UC TYPE, STAB TYPE OUTLET WITH FIXED INSERT

84
COPPERHEAD 1230Y-HS-1000 TRACER WIRE
WIRE, TRACER, CARBON STEEL, SOLID, 30V, 1C, #12. ANNEALED CARBON STEEL WITH COPPER CLAD, 30MIL HIGH DENSITY-HIGH MOLECULAR WEIGHT YELLOW POLYETHYLENE JACKET. IN COMPLIANCE WITH ASTM D-1248. TO BE SUPPLIED ON. 1000 FT SPOOL

85
BUFFGAUGE MINEUNCFB10040CV PNEUMATIC VALVE
VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 40 FEET OF CAPILLARY TUBE

86
DRESSER 0088-0318-108 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1IN FPT X 1/2IN CTS, 0.090 WALL, PE X 1IN MPT, BLACK

87
DRESSER 0088-0338-108 SERVICE HEAD ADAPTER
ADAPTER, SERVICE HEAD, 1-1/4IN FPT X 1/2IN CTS, 0. 090 WALL, PE X 1-14IN MPT, BLACK

88
LYONTEC 2INX4IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 2 IN X 4 IN

89
LYONTEC 2IN X 6IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 2 IN X 6 IN

90
LYONTEC 4IN X 6IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 4 IN X 6 IN

91
LYONTEC 4IN X 8IN GLAND BOX STEVE VICK INTER
GLAND BOX, LYONTEC, FOR LIVE GAS MAIN INSERTION SIZE 4 IN X 8 IN