Large Welding Shop Auction for PDS Welding - Milton
Previous Page Listing ID#: 90808

Auction Location
Milton, ON L9T 5A6
Full Address Available on Saturday, Sep 15
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Sunday Sep 16
Bidding Ends: Thursday Sep 20
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Rapid-Sell c/o David Moore & Associates Inc.

Website: www.mooreandassociates.on.ca

GoToAuction.com ID#: 5077
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Terms and Conditions - To Bid and Buy REGISTRATION & IDENTIFICATION: At the time of registration, we collect information about you to verify who you are before you can bid. We collect credit card information to ensure that you are a qualified buyer. All bidders must be of legal age to bid. PAYING FOR YOUR PURCHASES: There is no cost to register for an auction. Your credit card will not be charged unless you win. When an auction closes, if you are the winner, we will charge your credit card with the winning bid amount, plus applicable Buyers Premium and taxes, as stated in terms of auction. Credit Cards include Visa and Mastercard only. Vehicles must be paid for entirely by bank draft either prior to or at time of pickup. REVIEWING YOUR BIDS: During an auction you can check the status of your bids at anytime. Note that no bids can be withdrawn after the auction for any reason. All items are sold as is, where is, with all faults. BIDDING NOTIFICATIONS: You can choose to be notified by e-mail during the auction if you have been outbid. Please note that outbid notifications are NOT sent out during the last two hours of the sale. WINNING NOTIFICATION & INVOICING: All winning bidders will receive an e-mail with an attached invoice from sales@rapid-sell.ca the morning after the auction closes. If you'd like to know whether you won a lot at the close of the auction, check your "bidder history" -- if it says "you will be notified" that means you are the high bidder on the lot. If you are not the high bidder, it will say "you have been outbid." PICKUPS & REMOVALS: Dates and times for pickup will be posted on our website. We do not ship. Do not bid if you are unable to have your items picked up. Any item not picked up during the posted pickup times will be considered an abandoned item. Items are sold as is, where is, with all faults. If you abandon or fail to pick up an item, your credit card will be charged for the purchase price of the item plus a minimum administration fee of $25 plus labour and trucking fees to remove the purchased items from the auction site during the scheduled pickup time. CONDITIONS OF ITEMS SOLD & OUR ONLINE CATALOGUE: Our best efforts are made to represent all items accurately in descriptions and photographs; however, all items are ultimately sold on an 'as is, where is' basis, with all faults. We strongly encourage all bidders to personally verify the condition of each item during the scheduled preview times. No responsibility is assumed by Rapid Sell or the seller for any errors or omissions. CLAIMS: No claims regarding goods purchased will be allowed. Bidders are reminded that all goods are sold on an 'as is, where is' basis, with all faults. PERSONAL & PROPERTY RISKS: We will not be liable for damage or injury to individuals or their property. ADDITIONS & DELETIONS: We reserve the right to remove and/or add lots and/or items to the sale at any point during the auction. BUYERS: The BUYER expressly agrees to indemnify and save Rapid Sell, the Seller and their assigns harmless from and against all claims, losses, expenses, damage or liability, directly or indirectly caused by or resulting from an act, including the negligent acts or omissions of Rapid Sell, or anyone acting in his/her behalf in connection with or arising out of auction. All bidders/buyers must be of legal age. RESERVE: Seldom are items sold with Reserve. If an item is being sold with a reserve, it will be clearly marked and identified. For items sold with a 'reserve', you will be required to pay a minimum amount in order to win the item. AUCTION RECORDS: In the unlikely event of a dispute, you agree to accept as true the information that we have in our records. SOFT CLOSE: Items close at regular intervals. To prevent a bidder from 'sniping', all bids made in the last minute of the auction will force an item to stay open for an additional 3 minutes. This will continue until all bidding has ceased. STRATEGY: We recommend that ALL BIDDERS put in their maximum bid when placing a bid online. This does not mean you will have to pay the amount you bid; you only pay one bid more than the next highest bid, and only up to your maximum bid. The software system will play out the bids as you would at a live auction and only uses the funds required to beat out the under-bidder at the prescribed bid increment. CATALOGUE ERRORS & OMISSIONS: If a description does not match a picture in a lot, the description takes precedence. All items are sold on an 'as is, where is' basis, with all faults. EMAIL COMMUNICATIONS: As per Canada's new anti-spam legislation (effective date July 1, 2014), we are required to secure your consent to communicate with you electronically. By registering for this auction, you are opting in to receive auction notices from Rapid-Sell.ca (sales@rapid-sell.ca). You may withdraw your consent at any time by clicking on the unsubscribe link contained within each auction notice. Your privacy is important to us -- your email address will not be shared with any other party. By bidding you are acknowledging agreement with the terms above.Do not bid unless you agree to all of these terms.
Listing Information

1
Lincoln Electric Precision TIG Welder
- square wave power source, Microstart II - with ground clamp & cable plus TIG torch & stick welder - pulse feature - with DC & AC - includes regulator but not bottle shown - water cooled - in working order - 600/460/230

2
Lincoln Electric CV300 MIG Welder
- wired 600 - with wire feed, LN-7 - includes ground clamp & cable - includes regulator but not bottle shown - in working order

3
Lincoln Electric 355 TIG Welder
- square wave - AC/DC TIG & stick arc electrode holder & cable - with ground clamp & cable - 575v - water cooled ?? - in working order

4
Lincoln Electric CV250 MIG Welder
- with wire feed LN-7 - custom made base with swivel casters and arm extension for wire feed, approx. 8' - 230/60/575, wired 575 - with ground clamp & cable - does not include tank shown - in working order

5
Lincoln Electric CV-250
- MIG welder with wire feed LN-7 - custom made base with casters, 2 fixed 2 swivel - 230/460/575, wired 575 - with ground clamp & cable - does not include wire or tank shown

6
Lincoln Electric Power MIG 350 MP
- MIG welder - 230/460/575, wired 575 - with ground clamp & cable - does not include tank shown - in working condition - TIG capabilities, scratch start

7
Miller Delta 450
- DC arc welder power source - includes additional Miller DVC DW2 MIG welder - includes ground clamp & cable - dual wire feed with 2 whips - in working condition - 230/460/575, wired 575, 3 phase

8
Lincoln Electric Power MIG 350 MP
- MIG welder - with ground clamp & cable - does not includes tank shown - 230/460/575, wired 575 - in working condition - TIG capability, scratch start - with push/pull whip

9
Lincoln Electric TIG 355
- square wave AC/DC TIG & stick arm welding source - 230/460/575, wired 575 - with ground clamp & cable - does not include tank shown - not working, unknown problem - no whip or electrode holder

10
Lincoln Electric Ranger 250
- generator/welder - gas powered Kohler engine - 25hp, 8000w output as auxiliary power source - showing 477 hours - set up currently as stick welder - includes ground clamp with cable, electrode wand & cable - in working condition

11
Lincoln Electric TIG 355
- square wave AC/DC TIG & stick arc welding power source - 230/460/575, wired 575 - does not include tank shown - includes ground clamp & cable - includes TIG torch & foot control pedal K870 Amptrol - in working condition

12
PT-32 Torch
- Power Torch 11.25, ESAB - plasma arc cutting torch - wired 575 - includes custom made cart, 2 swivel & 2 fixed front casters

13
Welding Positioner/Rotator
- IRCO - model 3K6X6AB, serial 14308 - max load torque 18,000 lbs in rotation, 37,000 lbs. in tilt - includes IRCO control unit, model 14308 - with foot controller

14
Welding Positioner/Rotator
- IRCO Automation - model 3K6X6 - max load torque 18,000 in rotation, 30,000 in tilt - IRCO controller & foot pedal

14
Ameri-Can Upcut Saw
- with Tiger Stop push/pull positioner - 3 phase - foot pedal control - includes 6 blades, 15 1/2" diam., 1" arbor, 3 freshly sharpened, 3 without protective coating - 8' & 10' Tiger Stop roller tables, 18"w with Tiger Stop controllers - purchased us...

14
IRCO Rotator Accessories
- work supports - small chuck (fits inside main chuck) - two 8" casters on 36" beam - two 6" caster on 60" beam

14
550 Extension Cord
- approx. 45'l - working

15
Welding Positioner
- Irco - 575v, 3 phase - with foot control - tilt & rotate - footprint 43" x 50" - working

16
Miller Dimension 452
- CC/CV DC welding power source - with ground clamp & cable, electrode wand & cable - in working order

17
Sub Arc Machine
- 3 phase, likely 550 - approx. 12 1/2" mast, arm approx. 14 1/2"l, footprint 8' x 4' x 2" plate base - power source LIncoln Electric Ideal Arc DC-600 - wire feed Lincoln Electric NA-3N - has not been used in last 2 years **Purchaser to disassemble**

18
ESAB CV 450
- constant voltage welding machine - with ESAB MIG 35 - with ground clamp & cable - includes power cable - in working order - with custom made cart, 2 swivel & 2 fixed casters - 230/460/575, wired 575

19
Lincoln Electric CV-305
- MIG welder - with LN-7 wire feeder - includes whip, ground clamp & cable - 230/460/575, wired 575 - does not includes tank shown - in working order

20
Piranha P50 Iron Worker
- punch, shear & copper/notcher - 68" x 36" (at base) x 60" - foot control - 575 - includes 2 new punches - with notcher attachment also - in working order

21
Bee Metal Sander
- model 40P - serial 394 - belt sander 4"w - 51" x 33" x 42" - comes with 8 new belts, 36 grit - 575 - can be used in vertical or horizontal position - in working order

22
Leten Bandsaw
- DCM-4 - tabletop 23 1/2" x 19 1/4" - throat approx. 16 1/2" - variable speed - 43" x 27" x 77 1/4" - 575 3 phase

23
MAS Radial Drilling Machine
- model VR4A - 1500mm radial drill - 50 mm drill diam. - 1500 mm boom length - in working order - with vice as pictured, 10" - base footprint 88" x 35 1/2" - needs approx. 11 1/2" to expand to full height - new 5.5hp motor, 3 phase - includes chuck s...

24
Complex Drilling & Milling Machine
- model DM-30 - 12 speed - mill/drill/tap/bore/ream - includes 6" vice, as shown - mounted to steel table 46" x 27" x 32 1/2" - overall height approx. 88" - 110 - includes top cover, not shown

25
Lathe
- Potisje-Morando - bed approx. 90" end to end - includes centre support, chuck & tail - approx. 24" capacity - approx. 128" x 39" x 51"

26
Ridgid Auto Chuck Machine
- 535A series threading machine - with foot switch - with reamer, die head - on pipe stand 43" x 27" x 44" - 120v

27
Hyd-Mech Bandsaw
- model S-23 - pivot style mitering bandsaw - light to medium duty applications - table 70" x 19" - feed side 44" - 5 hp, 575v - 97" x 70" x 63" - includes 2 new blades in boxes

27
Roller Feed Table
- 153'l, roller spacing 6" & 12" - 20"w - 32"t - does not include metal shown stored under rollers

28
RCS 5 Ton Overhead Crane
- includes crane, crossbeam & tracks - approx. 30 1/2' span, approx. 110'l ***Purchaser to arrange disassembly. Pick up by appointment**

29
RCS 5 Ton Overhead Crane
- includes crane, crossbeam & tracks - 2 speed track drive - approx. 29' span x approx. 80'l **Purchaser to arrange disassembly. Pick up by appointment**

30
RCS 2 Ton Overhead Crane
- includes crane, crossbeam & tracks - approx. 23' span x approx. 51'l **Purchaser to arrange disassembly. Pick up by appointment.**

31
RCS Jib Crane
- 1000 lb. capacity - approx. 14' length *Purchaser to disconnect power cable at disconnect box*

32
RCS Jib Crane
- 1000 lb. capacity - approx. 14' length *Purchaser to disconnect power cable at disconnect box*

33
RCS Jib Crane
- 1000 lb. capacity - approx. 14'l *Purchaser to disconnect power cable at disconnect box*

34
Acetylene Torch
- includes heavy duty cart, lines, regulators & torch - tank not included - 14" solid rubber tires on cart

35
Clark Forklift
- 2 stage mast - propane - solid rubber tires - model C500-50 - no side shift - forks with extensions, approx. 86"l - leakage in hydraulics - needs extensive work for certification **No propane cylinders included, purchaser must provide** * Forklift ...

36
Clark Forklift
- model C500.50 LP - propane powered - solid rubber tires - 3 stage mast, side shift - 42" tires - leakage in hydraulics - needs extensive work for certification **No propane cylinders included, purchaser must provide**

37
Trinco Dry Blast
- sandblaster & supply tank - model 48X36-BP - includes pails full & partial bag of sand shown - Ebony-Grit copper slag by Opta Minerals

38
Partial Skid Sand Blast
- approx. 17 bags - 55 lbs./bag - Ebony-Grit copper slag Opta Minerals

39
Hotsy Pressure Washer
- steam cleaner - power by diesel, kerosene or Nol Heating Fuel - see photos for model, serial numbers & further information - in working order

40
Devil Bliss Air Compressor
- model 445 - Baldor motor 10hp - 575v - approx. 120 gallon tank *Purchaser to disconnect air at wall and BX cable at box*

41
Miller Portable TIG Welder
- Maxstar 150 LT - 115/230, currently 230 cord - in hard body case - with foot pedal controller RFCS-6M - includes ground clean up & cable - refer to photo for everything included in this kit

42
New & Used
- Blackstone ACF9005, used, untested - ESAP plasma cutting torch line, used, as found - see photos

43
Victor Cutting Gear
- 350 series regulator, acetylene - cutting tip, goggles , sparker - 1/4" x 25' grade RM dual holding hose - all new

44
Ramset Dyna Drill
- rotary hammer - model 332 - tested & working - includes Condrive 1000 in case - assorted bits, Ramset & UCAN - UCAN hammer caps

45
DeWalt Bandsaw
- heavy duty deep cut variable speed - model D28770 - in hardbodied case - tested & working - includes 2 extra blades

46
UCAN Fastener
- model LV470 - includes Winchester strip tools 5LV527, red - in hardbodied case

47
Milwaukee Sawzall
- heavy duty - model 6527 - tested & working

48
Fein Angle Grinder
- German made - model WSG12-70E - 120v - 2700 - 7000 rpm - tested & working

49
Portable Cutter
- Steel Max - 7.25" - model 2802 - 3500 rpm - tested & working

50
Makita Pair
- circular saw, 7 1/4", model 5007NF, 5800 rpm, working - hammer drill, model HP2010N, concrete/steel/wood, needs repairs

50
Bosch Drill Plus
- 18v Brute, tested & working, in hardbody case - includes Mastercraft angle grinder with assortment of grinding stones, 4 1/2", 7 amp, tested & working

50
Clamps & Pullers
- Stabil specialty clamp set, 4 clamps - 6" & 8" gear pullers

51
ER316/316L TIG Rod
- 2 full boxes, 10 lbs. each - 1/16" diam. - heat # 178336

52
ER 410 TIG Rod
- approx. 1.3 boxes, total approx. 13 lbs. - 3/32" diam. - heat # 43146

53
Executive 410 TIG Rod
- class ER410 - .062" diam. - heat # E31355 - almost full box 8 - 9 lbs.

54
Tech Alloy 410 NiMo TIG Rod
- class ER410 NiMo - 1/16" x 36" - heat 567721 - full box, 10 lbs.

55
Tech Alloy 410 NiMo TIG Rod
- class ER410 NiMo - 1/16" x 36" - heat 567721 - 2 partial boxes, approx. 10 lbs.

56
Lincoln Electric TechAlloy 410 NiMo TIG Rod
- class ER410 NiMo - 3 3/2" x 36" - full box, 10 lbs.

57
Weld Mold Company TIG Rod
- 938 FCT - 1/16" x 36" & 3 /32" x 16" - 2 partial boxes, approx. 16 lbs. (approx. 8 lbs. in each)

58
Executive 410 TIG Rod
- class ER410 - heat E31355 - .062" x 36" - partial box, approx. 5 lbs. - includes approx. 8 lbs. Executive 99 MIG rods, .093" diam.

59
Monel TIG Rods
- filler metal 60 - N60-093-10TS - heat M87W9G - .093" x 36" - full box, 10 lbs.

60
Exocor 320LR TIG Rods
- class ER320LR - heat QM763 - .062" x 36" - approx. 9 lbs.

61
Lincoln Electric & Unitec TIG Rod
- Lincoln Electric TechAlloy 410 NiMo, 3/32" x 36", approx. 5 lbs. - Unitec C32T16, 5/64" x 36", approx. 5 lbs.

62
Exocor TIG Rod
- ER1205-1 - 3/32" x 36" - partial box, approx. 8 lbs.

63
Inconel & Nickel TIG Rod
- Inconol Filler Metal 718, heat HT3189EY, .093" x 36", approx. 3 lbs. - Inconol Filler Metal 710, heat HT78W1Ey, .062" x 36" approx. 1 lb. - Nickel Filler Metal 61, heat NN6045HR, .125" x 16", approx. 5 lbs.

64
Inco Weld & Executive 410 TIG Rod
- Inco Weld ER317L, 1/8" x 36", approx. 8 lbs. - Executive 410, class ER410, .125" x 36", approx. 14

65
Blueshield & Executive TIG Rod
- Blueshield 308", class AWS ER308L, stainless rods, heat E100131, .062" x 36", approx. 3 lbs. - Blueshield 630-308L, stainless rods, heat 4D354, 1/8" x 36", approx. 1 lb. - Executive 99, class ERNi-cl, heat 201305-35001, .093" x 36", approx. 1 lb. -...

66
Rod Holder
- custom built aluminum - 20 compartments - approx. 28 1/2" x 12 1/2" x 26 1/2" - great for organizing rod, doweling or whatever - contents sold separately

67
ESAB MIG Spools
- Dual Shield FC 717 - 1/16", 60 lb. spool - 2 spools

68
ESAB MIG Spools
- Dual Shield FC 717 - 1/16", 60 lb. spool - 2 spools

69
ESAB MIG Spools
- Dual Shield FC 717 - 1/16", 60 lb. spool - 2 spools

70
ArcWeld MIG Spools
- EasyArc 706.045, mild steel wire - 1.1mm, 44 lb. spool - 2 spools

71
Lincoln Electric MIG Spools
- Techalloy 418 - MG418045667 - .045", 33 lb. - 2 spools

72
Lincoln Electric MIG Spools
- Techalloy 418 - MG418045667 - .045", 33 lbs. - 2 spools, 1 without box

73
MIG Spools
- NS 115 CF - .045" & .035" - 2 partial spools, approx. 25 lbs.

74
Lincoln Electric MIG Spools
- Super Glaze 5356 - aluminum MIG wire - .035", 20 lb. spool - 2 spools

75
Lincoln Electric MIG Spools
- Super Glaze 5356 - aluminum MIG wire - .035" - 2 spools, 1 partial, 1 full, approx. 30 lbs.

76
ER 4043 MIG Wire
- Lincoln Electric Super Glaze - 4043, 3/64" 20 lb. full spool - InWeld ER4043, 3/64" approx. 15 lbs.

77
ER 5356 MIG Wire
- Thermacote Welco, 1/16", 13 lb. spool - Harris Welco, .035", 10 lb. spool

78
MIG Wire, Nickel
- Executive 61, class ER Ni-1, .035", approx. 10 lbs. - Unibraze, class ER Nicu-7, .045", approx. 10 lbs. - Techalloy ERNicu-7, .035", 1 lb.

79
MIG Wire, Aluminum
- Indalco 5356, 3/64" - second spool, 3/64" - approx. 15 lb. total

80
ER 317L MIG Spool
- 2 spools, each 30 lbs. - Inco-Weld - .035" & .045"

81
NR-211MP MIG Spools
- Lincoln Electric Inner Shield - .045", approx. 40 lbs.

82
Gas Shielded Core Wire
- MIG spools - Lincoln Electric Outershield, 71M Ar/CO2, 2 partial spools, .045", approx. 5 - 7 lbs. - Lincoln Electric Metal Shield, MC-6 Ar/CO2, .045, 33 lbs. - Lincoln Electric Outshield, 71M, Ar/CO2, partial spool, 1/16" approx. 5 lbs.

83
Lincoln Electric MIG Spools
- Outershield 71M - 0 .045", approx. 50 lbs.

84
INCO-Weld MIG Spools
- ER-410 diam. .035", 30 lbs. x 2 spools - ER-410, diam. .035", very small amount - ER-410, diam. .045", approx. 7-8 lbs.

85
Metalloy 110
- .045" diam. - approx. 35 lbs. (full spool & partial)

86
Stainless Steel Wire
- ER308L, .035" diam., 25 lbs. - ER309L, .035" diam., approx. 15 lbs. - 309LSI, .035" diam., 25 lbs. - 316L, 3/32", approx. 50 lbs.

87
Nickel Alloy
- Inconel ERNICRNO-3, .045" diam., approx. 10 lbs. - Exocor 410 NiMo, .035", 12 - 15 lbs. - TechAlloy ERNiCu-7, .035" diam., approx. 5 lbs. - Unibraze ERNi-1, .035" diam., 33 lbs.

88
ESAB MIG Wire & Tips
- ER5356 HQ - one 16 lb. spool of 3/64" (1.2mm) diam. - ten 1 lb. spools of .035" (0.9mm) diam. - 2 pkg. (10 pcs.) 035MT style contact tips

89
Aluminum Welding Wire
- two 1 lb. spools ER5356 alloy, .90mm - 15 x 1 lb. spool 5554 alloy, .045"

90
Lincolnweld L-61 Coiled Wire & Reel
- 5/64' (2 mm), approx. 60 lb. coil - with a 17 1/2" diam. wire reel - includes partial spool ER805-B2

91
Special Metals Filler Metal
- 30 lb. spool NI-ROD filler metal 99, .045" diam. - 50 lb. spool MONEL filler metal 60, .093" diam.

92
Blueshield & Stoody MIG Wire
- Blueshield LAC-6, 45 lbs. spool, .052" - Stoody Company 965-G, .045", 33 lbs.

93
Lincoln Electric MIG Wire
- Outershield 71M, .045", 25 lbs. - Outershield MC-710, .045", 25 lbs.

94
Bonarc E309LT-1 MIG Wire
- 2 spools, 1/16" - both appear full - 30 kg.

95
MIG Wire
- Aversta Welding ER310 stainless, .035", 25 lbs. - Lincoln Electric Innershield NR-211-MA, .035", 25 lbs.

96
Lincoln & Techni Weld
- MIG wire - Lincolnweld L-50, .03", 30 lbs. - Techniweld, silicon bronze, alloy 656, .035", 25 lbs.

97
ESAB Dual Shield MIG Wire
- Dual Shield 7100 Ultra, .045", 33 lbs. - Dual Shield II 110, .045", approx. 20 lbs.

98
Stainless MIG Wire
- Kobelco, Premiarc EW-317L, .045", 28 lbs. - Inco Weld, Duplex 2209 ER2209, .045", approx. 20 lbs.

99
Stainless & All Purpose MIG Wire
- Cor-Met 410-FC-G, .045", approx. 25 lbs., stainless - Innershield NR-211MP, .035", approx. 25 lbs.

100
Assorted MIG Wire # 1
- ESAB Coreweld Ultra, .052", approx. 20 lbs. - ESAB Coreshield 15, .035", 10 lbs. - Lincoln Electric Metalshield MC-706, .045", approx. 15 lbs. - plus 4th partial spool

101
Assorted MIG Wire # 2
- 4 partial spools - includes approx. 5 lbs. Sodel 8259, Tungsten, carbide, diam. 1/16"

102
MIG Copper Coated & Others
- Techniweld ER-705-6, 2 spools, .023" diam., 33 lbs. & .030 diam., approx. 20 lbs. - Unitec Super 7, .045" diam., approx. 40 lbs. - includes 4th partial spool

102
Executive Furniture
- cherry finish - desk & credenza - 72" x 36"x 29 1/2", twin pedestal, 6 drawers - 66" x 20" x 29 1/2" - some scratches & scuffing noted - contents NOT included - includes carpet saver & chair shown

103
Rod Assortment # 1
- approx. 17 partial pkg. - primarily TIG - some flux coated brazing rod - lots of value here

104
Rod Assortment # 2
- approx. 30 partial pkg. - primarily TIG - aluminum, copper, nickel, stainless - check out the photos for the value here

105
Rod Assortment # 3
- approx. 14 partial pkg. - plus 2 storage tubes - many aluminum filler rods - plenty of value here

106
Gouging Rod
- copper clad pointed electrodes - 7 full & partial packages - 3/16", 5/16", 1/4" & 3/8" x 12" sizes - estimated to be 200 plus rods

107
Welding Electrodes
- 7 pkg., 1 full, 6 partial - full (11.2 lbs.) 253MA, 5/32" diam. - partials as pictured - includes 316L-17, 309L, 316L, E317-17

108
Welding Electrodes
- 6 pkg., 2 full, 4 partial - 7018-1 MR, 11 lbs. full - 316", 5/32", full - partial 316", E7018, 308-16

109
Welding Electrodes
- 6 pkg., 1 full, 5 partial - Monel N190, 10 lbs., 1 full - McKay, sterling 316L, partial - Blueshield, cast 99, partial - Sodel 309L-16, stainless, approx. 10 lbs.

110
Welding Electrodes
- 5 pkg., 2 full, 3 partial - Avestra 347/MVNb full, approx. 12 lbs. & partial - Avestra 347/MVNb partial - Unitec cast C-32 partial - Easy Arc 528 MR full, 4 kg.

111
Welding Electrodes
- 7 pkg., 3 full, 4 partial - McKay, 410 AC-DC, 1 full 4.54 kg., 2 partial - McKay, sterling 309L-17, 1 full, 4.54 kg, 1 partial - Sodel E309L-16, full, 11 lbs. - ESAB 317L-16, partial

112
Welding Electrodes
- 6 pkg, 3 full, 3 partial - ArcWeld Easy Arc 528MR, 1 full 4 kg, 2 partial - Lincoln Electric Excalibur 7018-1MR, full 5 kg - ESAB E7018-1, opened but appears full, 6 kg. - ESAB 7018-1, partial

113
Welding Electrodes
- 6 full boxes - Blueshield LA-7018 - 11 lbs. each

114
Welding Electrodes
- 7 boxes, 2 full, 4 partial - Lincoln Electric E7018-1, full box, 5 kg - E76018-7, full box, 5 kg. - ESAB E7018-1, almost full, 11 lbs. - 7018, large diam. - BOX, E7024 full 5kg., opened - Inweld SX544, partial - Arctec 2655 AC-DC partial

115
Welding Electrodes
- 5 boxes, 2 full boxes, 3 partial - Avestar 253 MA AC/DC, full box, 11 lbs. - Weld Mold 9580, full, 10 lbs. - Weld Mold 958, 1/8" & 5/32", 2 partial boxes - McKay sterling 308L-17, partial

116
Welding Electrodes
- 5 boxes, 3 full, 2 partial - McKay sterling 308L-17, full, 6 lbs. - McKay 330 AC/DC, full, 6 lbs. - ESAB E701-1, full, 6.2 lbs. - ESAB E308L-17, partial - Bonarc E308L-16, partial

117
Welding Electrodes
- 11 pcs. boxes & airtight containers - 6 boxes electrodes, 5 containers with electrodes - ESAC E316L-17, 2 full containers (1 opened) 4.3 kg. each - ESAB 7018-1, full & partial, 10 lbs. - Avesta 253 MA AC/DC, full, 11.2 lbs. - BonArc E308L-16, parti...

118
Welding Electrodes
- 3 full pkg. R308L-14 5/32" diam., 9.2 lb. each - partial pkg. R308L, 1/2 lb. - full & almost full E309-16, 3/16" diam., 19 lbs. total - full 309LC, 1/8" diam., 10 lbs. - full 316-16 5/32" diam., 10 lbs.

119
Welding Electrodes
- 14 boxes, 12 full - Bohler E312-16, 4 full boxes, 10 lbs. each - Bohler E410-16, full box, 4.5 kg. - MG stainless steel electrodes, Slik Stik 6309-L, full box, 10 lbs. - Bohler E502-16, 6 full boxes, 10 lbs. each - Bohler E347-16, 2 full boxes, 10 ...

120
Welding Electrodes
- 7018 & 8018 - 7018, 3 full boxes, 2 full tubes - 8018, 5 full tubes

121
Welding Electrodes
- Sodel 308L-16 x 27, 309L-16 x 2 - 29 full tubes - 10 lbs. each

122
Welding Electrodes
- Arcos E316L-16, 7 tubes, 10 lbs. each - Red Baron 317L-16, 2 tubes, one opened but full, 7 lbs. each - Inco 6280, 4 tubes, 4.5 kg each - All State H57, 2 tubes, 10 lbs. each - P7 AC/DC 1 partial tube - Incenel 132, partial tube

123
Welding Rod for the Vintage Shop
- 6 cans Lincoln Electric, unopened - 8018-CI MR - 5/32" - 50 lbs. each

124
Anti Spatter Compound
- 208 L barrel with pump - estimated to be 2/3 full

125
Welding Cable
- 2 gauge - 600v - approx. 50m combined

126
Welding Cable
- 2 gauge - approx. 40m - includes 2 cables with terminals each end, approx. 10'l

127
Welding Cable
- 2 gauge - 2 partial spools - 600v - approx. 420' total

128
Granular Flux
- 2 full pails Inco Flux 5, submerged arc flux - almost full pail Ultra Synthetic 951 - partial tin pail, unidentified product - 2 bags OK Flux, 10.16 & 10.90

129
Work Safely From Heights
- 3 safety harnesses - 2 tethers

130
Ground Cables & MIG Torch
- 2 ground cables, both with clamps - MIG torch ST-23A with lines - status unknown

131
Welding Helmets Plus
- 7 welding helmets, auto darkening in need of maintenance or repairs - 2 bump hats, white - 1 safety visor

132
Q Gun Cable Assembly Plus
- new Q Gun Cable Assembly, 15' - new inert gas hose, 10', with fitting - Lincoln Electric connector & tips, new

133
Tiger Torches
- 41" torch wand for propane - hand torch & line with regulator, propane tired

134
Shelf Lot
- lines & weld craft gun - cutting tips, new - copper tubing, cable - regulator, foot control - pipe cradles & more - all items as found

135
Hardware & Fasteners
- finished hex nuts grade 5 - 1/2" zinc washers - 5/8" x 2 1/2" grade 5 bolts - wood screws - & more - partial containers

136
Milwaukee Cut Off Saw
- 14" abrasive cut off - heavy duty model 6175 - 120w - 3500 rpm - tested & working

137
Welding Rod Oven
- 22 1/2"t - 11" overall width - 7" oven diam. - untested

138
Trumpf Plate Beveller
- portable bevel machine - model TKFB100 - tested & working

139
Flex Dispenser
- LM-100v, Lucas Milhaupt Inc. - untested

140
Saw Blades & Abrasive Wheels
- Royce 14" blade, 1" arbor - 14", 180 T, 1 1/2" arbor - Gladu 15", 1" arbor - 15", 1" arbor - blades appear new or freshly sharpened - abrasive wheels, 8 in total - 12" to 16" - steel & stainless steel

141
Grade 5 Bolts & Others
- 7/16", 1/2" & 5/8" - 2" to 2 1/2" length - full & partial boxes - 6 boxes in total

142
Lincoln Electric Spool Gun & Controller
- Magnum SG - spool gun & control module - module controls gas flow & wire speed - with regulator & lines as shown

143
Vice Grips & Others
- new in package Irwin vice grips, 2 IISP - pneumatic drill, Ingersoll Rand, model 7802A - Unitool RV rust proofing gun with cup

144
Tools, Soldering Flux Plus
- Wolverine paste soldering flux, four 1 lb. cans - 2 pairs aviation snips - rivet gun - & so much more

145
MIG Welding Guns
- gun & cable assemblies - used, status unknown, some may not be complete - at least 6 in total - leather gloves, leather welding hood with lens

146
Supply Closet
- metal shelving unit, 36" x 18" x 76" - 4' & 8' fluorescent tubes, status unknown - paper towels & toilet paper - rubber gloves - Rubbermaid industrial mop bucket - Fast Orange pictured has been used

147
Welding Positioner
- 1/2 hp Leeson, wired 110 - no tilt, rotation only - with foot controls - footprint 24" x 30 1/2" - controller only works on high & turn slowly

148
Starley Roto Star I
- welding positioner - with controller & foot pedal - 110v, tilt & turn - does not includes vice grips pictured

149
Welding Positioner
- tilt & rotate - with foot controller - 110v - footprint 39 1/2" x 31" - tested & working

150
Starley Roto Star I
- with controller & foot pedal - working - 100v - tilt & turn - clamp NOT included

151
Starley Roto Star I
- welding positioner - tilt & rotate - with foot controller - working - 110v - clamp included

152
Emco Welding Positioner
- working - with foot controller - 8" chuck - 110v - rotation only, no tilt

153
Adjustable Roller Bed
- Irco - model XHGK-10 - motor power 2 x 0.55 kw - loading 10,000 kg - footprint 120" x 44" - 600v, 3 phase - in working order

154
Adjustable Roller Bed
- 120" x 28" - 120v - in working order - 14"w roller

155
Adjustable Roller Bed
- 120v - status unknown - roller width 13" - approx. 120" x 27"

156
Electromagnetic Drill Press
- Milwaukee - in working order - 120v, 400 rpm, 3/4" capacity

157
Electromagnetic Drill Press
- Fein - model DSK-658-5 - 11v, 230/550 rpm - in working order - looseness in guides

158
Welder Cooler
- liquid cooled - 26" x 12" x 17 1/2" including aluminum mounting stand - working

159
Torch & Power-Weld Reel
- cutting torches with hose, reel, tank crib & 2 regulators - reel mounted to tank crib, Power-Weld, has automatic recoil - more than 40' of hose - crib 25" x 16" x 71" to top of reel - tank NOT included

160
Georg Fischer Pipe Cutter
- pipe cutter & chamfering machine - bench mounting - 120v - tested & working - includes 2 new blades

161
Bug-O Burner
- gantry system - Track Torch for straight line cutting - includes 2 sections of track, total of 12

162
Banding Machine
- metal banding machine on dolly - will accommodate up to 1" diam. band - includes partial spool 1/2" banding - includes assortment of metal clips, tightener tool & cutters

163
Electrode Stabilizing Oven/Flux Holding Oven
- Gullco - model 350 - single phase - 100 - 500ºF - 22" x 27 3/4" x 21 3/4" - contents of oven included

164
Ridgid Pipe Threader
- model 300 power drive - includes stand - foot control - 115v - in working order

165
Steel Work Table
- extra heavy duty - 5' x 10' x 33" - 2" plate steel top - items on table NOT included

166
Steel Work Table
- heavy duty - approx. 4' x 8' x 33" - 1/2" plate steel top - table only, other items pictured NOT included

167
Steel Work Table
- extra heavy duty - 62" x 97" x 35" - 1 1/2" plate steel top - with swing out platform 12" x 8" - items on top NOT included

168
Steel Work Table
- heavy duty - 5' x 10' x 32" - 1 1/4" plate steel top - 4 row of 3/4" holes on 4" centres - table only, other items NOT included

169
Steel Work Table
- heavy duty - 5' x 10' x 32 1/4" - 6 legs, 1 1/4" plate steel top - items on table NOT included

170
Steel Work Table
- 48" x 96" x 33" - 1/2" plate steel top - items on table NOT included

171
Steel Work TAble
- 47" x 94 1/2" x 34" - 3/4" plate steel top - items on table NOT included

172
Boardroom Table
- 96" x 42 1/2" tapering to 33" x 30" - big enough for the family dinner - some scuffing of surface

173
Boardroom Chairs
- 4 chairs, 3 pictured - 26" x 27" x 40" - be comfortable while making the big decisions or inputting for auctions

174
Canon Image Runner 323551
- purchased as a refurbished unit last year - good working order - will accommodate up to 12" x 18" paper - comes with an extra box of toner - fax, photocopy, scan, networked

175
Executive & Boardroom Chairs
- 2 styles - 1 executive chair, high back & solid wood arm rests, upholstered seat back with wood accents, 26" x 26" x 4" - 3 boardroom chairs, adjustable seat height, tilt arms, 25 1/2" x 25"

176
Oasis Watercooler
- top load - 13 1/2" diam. x 38 1/2"t (excluding bottle)

177
Eureka Upright
- 12 amp vacuum - bagless upright with Air Speed Technology - with hepa filter - removable canister, floor height adjustment - model AS1000 - tested & working

178
Bar Fridge & Microwave
- Woods, tested & working, 21 3/4" x 23 1/4" x 32 3/4" - Proctor Silex microwave with turntable, tested & working, 18" x 13" x 11", model E701NP-F

179
Welding & Fabrication Reference
- 38 volumes - see photos for subjects covered

180
Pressure Gauges
- 20 units - from 400 to 10,000 psi - no longer functional for calibration purposes

181
Flanges
- 4 copper combination flanges, 3", new - 2 stainless steel flanges, see photos for specs

182
Valves & Clamps
- NVC ball valves for 3/4" pipe to 316 mm - 2 sweat & 2 threaded - 4 heavy duty 2 1/2" clamps

183
Mainly Stainless Steel Hardware
- couplers - half couplers - inserts - end caps - assorted fittings

184
Hardware Assortment
- mix of copper, stainless & carbon steel - elbows - reducers - washers, nuts - flanges - & more

185
Testing Equipment
- vintage pieces - Alnor Pyron in case - & others

186
Fridge & Microwave
- Moffat refrigerator/freezer 30 1/2" x 29" x 65"h - Danby microwave 17 1/2" x 12 1/2" x 9 1/2" - both in working order - fridge contents NOT included

187
Small Appliances for the Lunchroom
- Black & Decker coffee maker - Proctor Silex 4 slice toaster - Hamilton Beach toaster oven - small electric kettle

188
Lunch Room Needs
- table & chairs - folding poly table, approx. 30" x 60" x 29" - includes 5 folding chairs and 3 stackable

189
Stainless Fittings
- 1/2" & 1 1/2" 90º short weld ends - male weld connectors 1/2" & 3/4" - tees & more

190
Assorted Fittings
- stainless connectors, 1/2" thread - stainless inserts 3/4" thread - steel & aluminum caps

191
Primarily Taps
- assorted sizes of taps, most appear unused - 1 reamer, 1" size - rethread die 1 1/8 - 12 rethread die

192
Gray Tools Torque Wrench
- micrometer adjustable - # 72100 - 3/8" drive, with case

193
Square & Punched
- machinist's steel square set, missing flat ruler - steel stamp letters set, 1/8", complete

194
Roller Pins & Punches
- 1/4" number set - roller pin assortment

195
From the Toolbox
- drives, utility knife, tape, caulking gun - useful assortment

196
Welder's Assortment
- approx. 6L Powerweld coolant fluid, strikers - flashback arrestor, safety plates (12), nozzle tips - tip dip, flints, boot covers & more - some new, some with experience

197
Primarily Tips
- adapter tips, gas lenses - contact tips - assorted sizes, lots of pieces

198
For the Welding Shop
- holder & wire guides - electrode holder - other assorted parts as pictured

199
Soapstone Markers
- approx. 96 sticks - almost full box of #1 round - complete with a pencil holder

200
Cut Off Wheels
- approx. 40 count - 7" x 1/8" x 7/8" - classic steel/cast

201
Aluminum Grinding Wheels
- approx. 30 count - 7" x 1/4" x 7/8" - ALU 24

202
Allsteel Grinding Wheels # 1
- 23 count 7" x 1/4" x 7/8" Walter Allsteel - 4 count 9" x 1/8" x 7/8" Walter A-30 combo

203
Allsteel Grinding Wheels # 2
- 45 count 4 1/2" x 1/4" x 7/8" Walter Allsteel

204
Grind Safely
- 5 new face shield visors - 22 count 4 1/2" x 1/8" x 7/8" Walter A-30 combo - 7 count 4 1/2" x 3 /64" x 7/8" Walter zipcut - 2 x 6" wire wheels - other abrasives

205
Abrasives Plus
- approx. 35 count 7" x 7/8" resin fiber discs, 24 grit - assorted grinding & polishing wheels - 4 count 1 3/8" hole saws, new - 2 cans grey enamel

206
Shop Supplies Plus
- 5 bottles solder paste - vise grips 12L6, wire brushes, drills bits & more

207
Regulators & Torch
- argon-nitrogen/helium regulator - Lincoln argon regulator/flow meter - Turbo Torch nitrogen regulator - Victor regulator - torch - all believed to be reconditioned units

208
Regulators
- 3 units in bags believed to be rebuilt - others as pictured

209
Gauges & Nozzles Plus
- 5 new PT-32 torch nozzles - new torch handle - new Winter's Process Gauge 4 1/2" dial - 4 used gauges - assorted nozzles with experience

210
Specialty Electrodes
- approx. 5 lb. Weld Mold No. 966 3/32" - 10 lb. McKay 2209 AC-DC, 1/8" - 10 lb. 317L/SNR - 10 lb. low carbon UTR 6809 No - 7 full or partial packs of tungsten electrodes

211
Socket Sets
- Gray 3/8" to 13/16" with ratchet & spare pieces - Craftsman 3/8" to 3/4", appears complete

212
Welding Assortment
- 2 pkg. (18 sticks) Thermanit JEW 308L-17 - collets, contact tips, gas lens caps - 2 x 15' liner conduit - gas lens bodies, caps, MIG parts & more

213
Welding Supplies
- repair & maintenance - name brand parts - Lincoln Electric, American Torch Tip, Parweld, Tweco Professional - brass nozzles, contact tips, centrefire nozzle cones, copper gas cups, torch head - & more

214
Tools Plus
- Walter wire cup brush, new in box, 3 x 5/8"-11 - Blueshield 300A ground clamp - impact sockets, 1/2" drive - Walter wire wheel brusk, new in box, 4 1/2" x 3/8" x 5/8"-11 - Grip On welding clamps - Blueshield Master gauge, fillet weld gauge, new in ...

215
Caliper & Die Grinder
- new in package - Wespro pneumatic die grinder, DG25H - Insize Digital Caliper

216
Die Grinder & Ratchet Wrench
- new in package - Ingersoll Rand 1/2" drive ratchet wrench, model 1077XPA - Parts Master die grinder, #800-0-0140

217
Hardware & Fittings
- 2 boxes full - brass, aluminum, stainless, carbon steel - useful assortment

218
Regulators, Ball Valves & More
- 2 Medalist regulators - 2 Pinacle ball valves 1-316 - & more - see photos for all that is included in lot

219
Gloves & Goggles
- approx. 14 pair new leather gloves - 2 pair experienced gloves - 4 pair new goggles

220
Gloves, Caps & More
- welders' needs - leather welding gloves, 6 pairs, new - welding caps, approx. 40 - toques & ball caps

221
Gaskets Plus
- 4" & 6" red rubber - bearing & oil seals - & more - see photos for details & specs

222
Grip Tight Test Plugs
- high pressure test plugs - GT4P80 - 2, new - 3.80 to 3.91

223
Grip Tight Pressure Testing Plugs
- model GT4P120 - 2 new in package - 3.60 - 3.74

224
Lincoln Electric Parts
- repair & maintenance - nozzles, nozzle insulators, cable lugs, contact tips - & more

225
Fittings Plus
- brass & copper - unions, washers & more

226
Tool Bag & Tools
- Jobmate soft bag tool bag, 15", wide mouth opening - telescoping gauges, sockets (metric & SAE), screwdrivers, wrenches

227
Toolbox & Tools
- 19" Stackon poly toolbox - includes all tools show in photos - driver bits, hex key, hammer, circuit tester & more

228
Toolbox & Contents
- 26" x 10" x 12" with interior lift out tray - Walter mini grinder - aviation snips - 10" locking pliers - & more

229
Vice Grips Plus
- two 11R - one 11SP - 2 Kanttwist clamps

230
Vice Grip Power
- 4 pcs. - three 11R - one 20R

231
Hardware & Tools
- from the tool chest drawer - 4 flashbacks arrestors, 2 oxygen, lacetylene, 1 propane - cutting torch 141C - pins, cable ties, assorted small hardware & much more

232
Drill Bits, Key Stock & More
- assortment of drill bits, experienced - Key stock, 2" to 9" lengths, 1/4" to 1/2" - & much more

233
File & Bind
- load binder strap & ratchet - 9 pc. file/rasp set - grinding wheels & wire wheels

234
Plano Small Parts Sorters
- 2 boxes, 14" x 9" x 2" - tips, connectors, clamps, bulb, assorted fittings, links, springs

235
Cutting Torches Plus
- 2 torch heads - taps - strikers - tip cleaners - & more

236
Barnes Submersible Pump
- appears as new - model SP33Vf - .2 hp / .33 - single phase 120v - 1/2 max hp - 1 1/2 discharge - includes garden hose - tested & working

237
Get Henry To Do It
- pneumatic International NRV200-22 dry vac - good working order - comes with a Shark upright, beater bar non-functional, unit runs

238
The Old Park Bench
- cast iron ends & back insert - one leg has been welded - some rebuilding necessary

239
Beach Toolbox & Contents
- 20" metal toolbox - with lift out tray - chipping hammers - hacksaw - file - & more

240
Tool Chest & Contents
- wooden tool chest, 32 1/2" x 12 1/2" x 12", with hasps for locking - contents include levels, ruler, hammers, clamps, screwdrivers & much more

241
Locking Wrenches
- 3 vise grip 11R - vise grip 10CR - vise grip 10WR - all grip locking clamp, with extra jaws not pictured

242
Milwaukee M-Spector 360
- rotating inspection scope (9mm) - with battery & charger - 2.7" LCD display, 3' cable - unit has seen minimal use, as new

243
Tool Assortment
- hex keys, metric & SAE - punches, chisels, knives & more

244
Sockets & Drives
- primarily 3/8" drive - regular, deep, impact - mix of metric & SAE - 1/2" to 3/4" adapter, knuckle & more - 6 ratchets, extensions & more

245
Wrenches & Hardware
- assorted wrenches & pliers - tool wrenches - stop watch, gauge, pipe cutters - Kant Twist clamp & more

246
Air Tools
- 3 Matrix die grinders - Westpro die grinder with extension - 1R air drill - air nozzle

247
More Air Tools
- CH 3/8" drive air ratchet - CH 1/2" drive impact wrench - CH air chisel - grinders & more

248
Sets
- hole saws, 1" to 4" with mandrel - power screwdriver & nut driver set - Unitool SAE hex set - Mastercraft wrenches 8mm to 22mm

249
Snap On & Adjustables
- 12", 10" & 8" adjustable wrenches - Snap-On wrenches 13/16" to 3/8", 7 pc.

250
Wrench Sets
- Craftsman 1 1/4" to 7/16", 14 pc. - Challenger by Proto 1" to 3/8", 11 pc.

251
Wrenches, Abrasives, Clamps
- 3 JayBe clamps - SAE & metric wrench assortment - grinding & cutting discs - wire brush, sandpaper & more

252
Tools in a Box Lot
- tapes, rulers, solder gun, hacksaw - auger bolts, assorted hardware & much more

253
Screwdrivers
- dozens & dozens - a useful assortment

254
Welding Assortment
- Easy Flo 45 wire - other electrodes - handy flux - new electrode holder & much more

255
Pounding Collection
- hammers - ball peen, framing, chipping - approx. 10

256
Work Safely
- eye protection - hearing protection - gloves - knee pads - respirator/masks - & a light for visual aid

257
Abrasives
- 14" cut off wheels, 4 pcs. - flap wheels - sanding drums - wire brushes - & more

258
Curv-O-Mark
- Jumbo Contour Market - compact & time saving - appears as new - for pipe layout and structural steel joints

259
Weldshop Assortment
- 2 pair locking chain pliers - new drill chuck model JT4, 1/16" to 3/4" - Drill Doctor - electrode holders - poly filter plates

260
Assortment For the Cupboard
- spare parts new & used - from machine screws to contact tips - CO2/argon regulator - brass, copper & more

261
Foot Pedal & Lines
- mix of new & used - status of all untested

262
Extension Cords & Trouble Light
- 3 heavy duty extension cords - note: one cord has 2 male ends - trouble light

263
Organizers
- 2 door cabinet with bins 23" x 10 1/2" x 58 1/2" including base, 48 bin drawers, lockable complete with key - 2 small plastic organizers, each 12" x 6" x 20"

264
Two Aluminum Tables
- 28 1/2" x 16" x 30 1/2", open front at bottom - 28 1/2" x 16 1/2" x 31", closed at front at bottom - custom welded construction

265
Folding Tables
- 72" x 30" x 29", damage to one corner - 60" x 29 1/2" x 29", good condition

266
Office Essentials
- 2 vintage metal desk & 1 watercooler - Steel Case double pedestal metal desks, 60" x 30" x 28 3/4" - Quantum watercooler, top load, 35 1/2"t excluding bottle

267
Mechanics Tool Chest
- Gray Tools - storage & work area - 5" hard rubber casters, 2 fixed & 2 swivel - graduated drawers, 9 in total - key missing, locking mechanism deactivated - top drawer not latching due to small bend - 42" x 19" x 40" (excluding handles)

268
Mechanics Tool Chest # 2
- 2 pc. Gray Tools set - lower unit 27" x 18" x 40" excluding handle - upper unit 26" x 16" x 19" - 5" casters, 2 fixed, 2 swivel - lid on upper box has had significant bend - no keys for unit, lower lock mechanism disabled

269
Autotransformer & Reduction Box
- Staco variable autotransformer - Baldor 58:1 reduction box - both untested

270
Toyoto Forklift
- 2 stage mast - propane powered - solid rubber tires - as found, currently not running **No propane cylinders included, purchaser must provide**

271
Magnetic Lifter
- Eclipse Magnetico - UltraLift - 60 lb. weight - model UL0500 + (UL1100+) - 1100 lb. capacity

272
Plywood & Chipboard
- full sheets - 7 sheets of each - primarily 9/16" thickness - 4' x 8' sheets

273
Linde Welder
- model DCL300 - 3 phase - DC-ARC welder - status unknown, plug has been cut off cord

274
Metal Bender
- 3 phase - 575 amp - 1 hp - with 3 extra roller, as pictured - footprint 32" x 35"

275
Ingersoll-Rand Air Compressor
- T30, model 242-5D - 575v, 3 phase - 5 hp Elektrim motor - unit was in good working order when taken out of service and replaced by a larger unit

276
Bewo Metal Chop Saw
- with vise, vise has 12" jaws, opens approx. 5" - type 315 LT circular saw - 2 speed, for stainless & mild steel - 18.5 & 37m/min - equipped with unique self-centering jaw system, clamping on both side of saw - fan coweling has been removed - status...

277
Lincoln Welder
- stick/TIG - square wave TIG 175 - 475/575 v - believed to be in working order - includes both wands, ground cable & carts

278
Memco Welder
- AC/DC 250 HF - with Miller Coolmate 4, believed to be non-functional - welder believed to be functional - includes foot control

279
Lincoln Sub Arc Machine
- Idealarc DC600 - with Lincoln Squirt Welder LN-8, wire feeder - flux tank - see photos for more details - status unknown

280
Wisconsin Air Cooled Motor
- 4 cylinder - with attached clutch - has not run recently but not seized - sitting on but not mounted to heavy steel grate, 36" diam. x 2 1/2" depth (not solid)

281
Crate Lot
- whips & cables - status unknown - mainly TIG & MIG - 36" x 36" x 28"

282
Crate Lot
- hardware & more - Gas Booster, model GBD-5 - stainless steel flanges - U bolts - fittings, bolts, lock nuts - flex tube - stainless steel tubing - & more

283
Skid Lot
- MPI fitting - solenoid valves - coil stainless flex - winters gauges, 60 psi, liquid filled - fan - & more

284
Box Lot # 1
- stainless steel fittings - inserts, reducers - hose couplers - couplers - 100 plus pounds

285
Box Lot # 2
- Swagelok fittings & others - brass & stainless - 100 plus pounds

286
Box Lot # 3
- fittings plus - mainly brass - Swagelok, top ring, cush-a-clamp, Spaenaur - Fisher Control 95L, 17057098

287
Box Lot # 4
- fittings & more - many new Swagelok fittings - see photos for details

288
Welding Screens
- AGO Industries - 2 screens with frames - 8' & 6 1/2', approx. 7't - both are experienced

289
Welding Screens # 2
- 2 screen with frames - approx. 4' & 6' lengths, approx. 6't - both are experienced

290
Welding Screens # 3
- 2 screen with frames - approx. 8 1/2' & 4 1/2'l, 6' & 6 1/2't - both are experienced

291
Welding Screens # 4
- portable screen - roller blind style, retractable - 6'w

292
Aluminum Tubing
- square, rectangular & round - includes some flat bar - rectangular 3" x 2" , two 20', one 15', approx. 1/8" - round 1 5/8" diam. 15' & 8'l, 2" diam. 8'l, 1" diam. 10' & 8'l, 1/2" diam. approx. 10', 2 1/2" diam. two 8'l, 3" diam. 6'l - square 3" x 3...

293
Aluminum Bar
- flat bar - 5" x 1/2" one 5 1/2' - 2" x 1/2" approx. 130 linear ft. - 1 1/2" x 1/2" approx. 120 linear ft. - 2" x 3/8" approx. 130 linear ft. - 3" x 3/8" approx. 40 linear ft. - 6" x 3/8" approx. 15 linear ft. - 5" x 3/8" approx. 5 linear ft. - 6" x...

294
Aluminum Angle Iron
- 2" x 2" x 1/4" approx. 80 linear ft. - 2 1/2" x 2 1/2" x 3/8" approx. 44 linear ft. - 2 1/2" x 2 1/2" x 1/4" approx. 103 linear ft. - 2" x 2 1/2" x 1/4" approx. 10 linear ft. - 2" x 3" x 1/4" approx. 13 linear ft. - 2 1/2" x 2 1/2" x 3/16" approx. ...

295
Aluminum Angle Iron # 2
- 3 x 4" x 1/4" approx. 29 linear ft. - 3" x 3" x 3/8" approx. 162 linear ft. - 3" x 4" x 3/8" approx. 18 linear ft. - 2" x 3" x 1/4" approx. 66 linear ft. - 3 1/2" x 5" x 3/8" approx. 5 1/2 linear ft. - 2 1/2" x 3" x 1/4" approx. 6 1/2" linear ft. -...

296
Aluminum Supplies
- flat bar, square tubing, angle channel, I beam - flat bar 5" x 3/8" approx. 24 1/2 linear ft., 6" x 1/2" approx. 29 1/2 linear ft., 8" x 1/4" approx. 13 linear ft., 2" x 1/2" approx. 20 linear ft. - tubing 2 1/2" x 2 1/2"x 1/8" approx. 11 linear ft...

297
Aluminum Supplies # 2
- channel, I beam, angle, flat bar - flat bar 4" x 1/2" approx. 20 linear ft. - I beam 3/12" x 6" x 3/8" approx. 10 linear ft. - channel 3 1/2" x 6" x 1/2" approx. 9 linear ft. - angle 4" x 6" x 3/8" approx. 26 linear ft., 3" x 4" x 3/8" approx. 202 ...

298
Aluminum Channel
- 4" x 12" x 1/2" - approx. 20 linear ft.

299
Contents of Shelves
- 4 shelves of useful items - BX cable, heavy welding cable, assorted connectors - metal toolbox - plugs, fuses, electric motor

300
Contents of Shelves # 2
- BX & heavy cable, some connectors - shut-off boxes - transformer

301
Chemicals & Paint
- 2 shelves - full & part containers - epoxy paint, industrial solvent, alkyd primer - heat & rust resistant paints - spray gun & pressure gauge

302
Galvanized Conduit
- 5 - 10' lengths of 1" conduit - threaded ends with couplers - one 7', 5/8" OD conduit

303
Shop Supplies
- box of gasket material, approx. 1/2" rope style plus 40' flat roll, 2 1/2"w - 2 boxes banding clips, 1/2"w, 4000 to 5000 clips - quantity of 2" nails - almost full reel of 16g, 2 conductor shielded cable

304
Work & Play
- Wedco 5 gallon fuel container - two 5 gallon marine tanks, 1 with hose, 1 without - Mastercraft lawn spreader, model CT100B - approx. 1 dozen dolly wheels

305
Louisville Fiberglass Ladder
- 8' step style - heavy grade 1 industrial - legs look good

306
Gaskets
- quantity of primarily rubber type gaskets - assorted sizes

307
Stainless Hose Clamps
- gear type hose clamps - approx. 145 stainless 9/16" to 1 1/4" - approx. 240 stainless 11/16" to 1 1/2"

308
Bin & Contents
- metal mesh bin, approx. 36" x 36" x 38" - pull plugs, 1 1/8" diam. x 3/4"l - 8 Cusha-Clamps, 1" - 2" cap plugs - quantity of gaskets

309
Toolbox & Contents
- chipping hammer - selection of sockets, mostly Craftsman - 21" cantilever toolbox

310
Pipe Roller & Beam Trolley
- incomplete Sumo 2 ton beam trolley - adjustable height pipe roller

311
Trolley & Contents
- 16 bins - assortment of stainless & carbon steel fittings - NSF rack 36" x 14" x 55 1/2"

312
Steel Workbench & Contents
- bench 72" x 22" x 58 1/2", 2 legged, **purchaser to unfasten from wall** - 1/2" nuts, washers, bolts, assorted sizes - strap ratchets - bags of pipe caps - 3" bench vice

313
Extension Ladder
- 24' - legs are good - slight bend in rail at top - grade 3

314
Ridgid Tri Stand
- no. 460 Ridgid tri stand - 1/8" to 6"

315
Hose & Pump
- hydro test pump needs a rebuild - 1/4" diam. flex hose on reel - pressure washer ward & hose - assorted garden hose

316
Whirlpool Washer
- unit untested - commercial quality super capacity - porcelain basket

317
It's the King
- King Canada 14" cut-off saw - 15 amp, 3750 rpm

318
Sumo Two Ton Chain Hoist
- serial 950119 - model SH20


320
Break Time
- time clock operated signal bell - work lamp

321
Chain Sling
- two 13' lengths of 1/2" chain with hooks

322
Heavy Duty Appliance Cart
- missing roller belt

322
Cermaic Fiber
- 8 boxes - Cerablanket - 1" 7 2" thick - 2" x 150' length - 1" x 300' length - mix of the two sizes

323
Hobart Wire Feeder
- new in box - Hobart model 2210 wire feeder - with gauge & hose as pictured - semi-automatic solid-state control wire feeder - includes mounting basket

324
Pipe Cutter
- Aireo Minigraph pipe cutter - 3 size of pipe bevelling machine co. saddles, approx. 9", 14" & 22"

325
Torches For the Welder
- burner torches - cutting torch - heating torch - as pictured

326
Lincoln Electric Wire Feeder
- model LN-25 - includes welding gun - unit untested

327
No. 10 Radiograph by Airco
- torch cutting, track - untested

328
Water Cooler & Friends
- stainless steel tank, 16 1/2" x 11" x 21 1/2" - 2 winches - mounting bracket - pump untested, plug cut off cord

329
A Lot Storage
- approx. 100 bins of assorted sizes & colours - as pictured

330
Pipe Wrenches
- 18" aluminum Snap-On - Ridgid approx. 14", note missing end

331
More Pipe Wrenches
- Jet 18" & 24" - heavy duty AL, 36", broken end

332
Vice Grip Locking Clamps
- 6 pair - clamps have been customized as pictured

333
Vise Grip Locking Clamps II
- 6 pairs - 3 pairs missing springs

334
Vise Grip Locking Clamps III
- 6 pairs - 3 pairs missing springs

335
Vise Grip Locking Clamps IV
- 5 pair, 1 missing spring - 4 punch set, 1/2" & three 5/8"

336
Bar & Sockets
- 3/4" drive Gray bar - 2 1/16", 2", 1 13/16", 1 1/16", 1 5/8" Gray sockets - 1 1/2" socket

337
Large Wrenches
- Gray two 1 1/2", 15/16" - 1 5/8", 1 7/16" - 5 pc. in total

338
Impact Tool
- 1/2" drive Ingersoll Rand impact tool - 23 primarily impact sockets 7/16" to 1 1/2"

339
Charger & Drive
- Terminator intelligent battery charger - 4, 12 & 24 amp multi-stage - complete set Gray Tools screwdrivers

340
Tube Benders
- 2 units - Imperial Eastman 3/4" OD, 3R - Imperial Eastman 5/8" OD, 2 1/4" R, small chip

341
Tube Benders
- Ridgid 1/4" OD, 5/8" radius - Super EGO-Spain 1/4" OD, 3/4" radius - Super EGO-Spain 3/8" OD, 1 1/8" radius - Super EGO-Spain, 1/2" OD, 1 11/16" radius

342
Sockets & Ratchets
- primarily 3/8" drive - approx. 50 sockets, assorted brands - 1/2" Gray sockets & Mastercraft 3/8"

343
Toolbox & Contents
- steel box 8 1/2' x 20" x 20" - pipe clamp ends - eye bolts - nozzle tips

344
C Clamps
- three 6" - one 5" - two 7"

345
Combination Wrenches
- variety of brands, 14 in all - five 7/8" - three 15/16" - two 1" - two 1 1/16" - one 1 1/8" - one 1 1/4"

346
More Wrenches
- 7 metric, 7mm to 14mm - 9 combination wrenches, 5/16" to 3/4" - two 3/4" multi-great ratcheting combination wrenches - 3 box end wrenches

347
Drill Bits & More
- 5 containers of drill bits - 15" adjustable wrench - level, screwdrivers, allen keys, snips

348
Angle Grinders
- Walter with wire cup - Metabo - both tested & working

349
More Angle Grinders
- Metabo, model W23-180, 15 amp - Hitachi 7" disc grinder - both tested & working

350
Another Pair of Angle Grinders
- both by Metabo - tested & working

351
Yet Another Pair of Angle Grinders
- Walter Super 5, 30 A 150 - Walter 8 amp - both tested & working

352
Keep On Grinding
- Walter Super 5 30A 150 - Metabo - both tested & working

353
The Last Grinder & Pals
- Metabo grinder - Craftsman saber saw - Walter drill, missing chuck - all tested & working

354
Spring Clamps
- 7 large & 4 medium spring clamps - 1 Bessey quick release F clamp

355
Bessey Clamps
- 4 Bessy ratchet clamps - two 8" - one 10" - one 12"

356
Hammer It
- 10 hammes - mallets, ball peen, claw hammers - includes brass headed hammer

357
Sledge Hammers
- fiberglass handles - 2 hammers, 8 lbs. - experienced but in good condition

358
Smooth & Level
- 4' level, missing one lens - two 2' levels, all lenses intact - 4 files - pry bars - magnetic pick up - & more

359
Bessey & Good Hands Plus
- clamps for the job - 6" Bessey C clamp, heavy duty - Good Hand and Good Hand-like clamp

360
Fein Angle Grinder
- 7" - tested & working

361
Welding Supplies
- inert gas regulator, Victor - whips - torch head - see photos

362
Ridgid Pipe Stands
- 2 - model VJ99 - 28" - 53" adjustment - 12" capacity

363
Ridgid Pipestands
- 2 - model VJ99 - 28" - 53" adjustment - 12" capacity

364
Work/Support Stands
- tripod base - 2 heads for each, pipe stand & flat stand - adjustable height

365
Roller & Pipe Stands
- 3 tripod bases - 3 roller heads - 2 pipe stand heads - adjustable heights

366
Lincoln Electric LN7
- wire feeder - status unknown

367
Miller S-22A
- constant speed wire feeder - status unknown - with Lincoln Electric CO2 regulator

368
Gauges & Fittings
- Winters gauges, 4 1/2" dial 1/2" NPT, both new in box - fittings, new & experienced, 90º, couplers & more, brass & stainless

369
Toolboxes & Contents
- metal fabricated tote 16"l - Rubbermaid toolbox with tray 20"l, missing one latch - includes hex keys, screwdrivers, pliers, hacksaw, ball peen hammer, handheld propane torch

370
Projects To Finish
- and the paint to finish it with - 4 wrought iron table legs - 2 pc. of decorative iron work - includes partial containers paint & other fluid - Torcan mini heater also included

371
Bench Grinder & Stand
- King 8" bench grinder, tested & working - welded angle iron & plate stand 24 1/2" x 12 1/2" x 32", bottom shelf for storage of supplies

372
Bottle Jack Plus
- heavy duty hydraulic jack, tested & working, missing handle - 18" Jet, crescent-type wrench - & more

373
Name Plates
- carbon steel plates, 3 1/2" x 5" x 1" - drilled for ready attachment - approx. 50 - 75 in crate

374
Air Hose & Tools
- Sioux 1/2" impact wrench, model 5000 - Ingersoll Rand ratchet wrench, model 1077XP - both untested - includes hose & blower gun

375
Welding Rods
- partial containers - 85AB OK TIG rod 316L, approx. 8 lbs. - Alcote aluminum rod, approx. 1/2 lb. - Execor, Stellite 3/32", approx. 5 lbs. - Inco Weld 1/16" ER 309L, approx. 8 lbs. - Blueshield Crystal 4043 3/32", aluminum rod - ESAB, Spoolarc 65, 1...

376
Storage Options
- for paperwork & supplies - lateral 4 drawer letter sizes 36" x 19" x 53 1/2" - 2 door metal cabinet 36" x 18" x 65", 5 adjustable shelves - includes contents Argweld inflatable pipe purging systems, 3" to 6" sizes

377
Ridgid Pipe Threader Plus
- 3 way - 1/2" , 3/4" & 1" - model 31-A - 8 Ridgid universal chasers, 4 new in package, 4 experienced, do not fit 31-A

378
Slings & Straps
- various lengths & widths - see photos

379
Cable Slings & Rollers
- 10 wire cable slings, 3/8" & 1/2" woven cable - 2" rollers ten 48 1/2"l, one 27 1/2"l

380
Abrasives
- cut off wheels - sanding wheels - wire cup - flap wheel & more - mostly for 7/8" arbour

381
Power & Light To the Work Site
- extension cords - trouble light - light, medium & heavy duty

382
Protective Clothing & Supplies
- leather welding coats, L & XL - leather gloves - welding helmets, experienced - face shields - bump cap - knee pads - eye protection

383
MIG Welding Spools
- 6 spools, full & 5 partial - various alloys - see photos for details

384
Welding Rods
- partial containers - copper clad cutting electrodes - Unitec C-32, cast 3.25mm - Blueshield 316L 1.6mm - Bonarc - see photos for complete details

385
Portable Pipe Cutting Machine
- Auto-Picle-S - oxyfuel pipe cutter - bevel or straight cut - unit untested

386
Torch Head, Cables & Tips
- Wika gauges - torch head & cables - Tweco contact tips - Tweco nozzles - includes leather welding sleeves

387
Ground Cables
- 3 cables

388
Makita Die Grinder
- tested & working - includes wheels & grinding stones - partial kit, appears to have had limited use

389
Hydrostatic Test Station
- Hydraulic Technology Inc. - # 9901-100 - max inlet psi 90 - outlet psi 10000 - includes Rubbermaid cart - in working order

390
Steel Work Support
- 72"l, 8" x 3" channel - frame 6" x 6" tubing - 32"t - 2 in total

391
Steel Work Supports
- 84"l, 8" x 3" channel - frame 6" x 6" tubing - 32"t - 2 in total

392
Work Station & Stools
- 36 1/2" diam. x 28 1/2"t - 2 metal stools included

393
Slings & Chokers
- approx. 20 - various degrees of experience

394
Fittings & Hardware Plus
- clevises & other fasteners - fittings - bins & tote

395
Work Supports
- 5 supports - two 21" with 4" casters - two 32" with 5" casters - one 49" with 6" casters

396
Pneumatic Tools & Hose
- chisel - Ingersoll Rand impact wrench, 1/2" drive - air wand - untested - air hoses with fittings

397
Power & Light
- trouble lights & extension cords - includes retractable wheel with cord

398
Barrel on Stand
- very small amount of cutting oil left in barrel - 45 gallon barrel - rolling stand

399
HSS Taper Shank Twist Drill
- 6 drill bits - 14" to 17 1/2" lengths - one of each of the following sizes: 2 3/16', 2", 1 25/32", 1 41/64", 1 17/32", 1 1/2"

400
HSS Taper Shank Twist Drills
- 1 1/4" to 33/64"' - 21 in total

401
Reamers & Drill Bits
- HSS round shank drill bits - selection of taps also included - 50 plus pieces

402
Chucks & Hole Saws
- 3 morse taper chucks - selection of hole saws - includes cabinet shown

403
Heavy Duty Pedestal Fan
- Air King by Lasko - 30" blade, adjustable height - working

404
Mach 30 Pedestal Fan
- Marley Industrial Products - heavy duty, in working order - 30" blade, adjustable height


406
Electrode Stabilizer Ovens
- Dry Rod, 300ºF avg. - Gullco, model 10B, single phase, 100-400º - status unknown

407
Ridgid Clean
- professional grade wet dry vacuum - model WD19500 - 2 1/2" OD hose missing, includes wands & brush - 16 gallon, 6.5 peak hp - tested & working

408
Vise Grip Locking Clamps
- 4 pair 11SP - 2 pair are missing springs

409
Vise Grip Locking Clamps
- 5 pair 11SP - 2 pair are missing springs

410
Bessey Locking Clamps
- 3 pair - GRM & GRZ V - all with springs

411
Vise Grips Locking Clamps
- 2 pairs - 18SP & 18R

412
Bessey Clamps
- Classix with heavy duty pad - heavy duty - 5 in total - 12" - one pad missing

413
Bessey Clamps
- Classix style with heavy duty pad - 5 in total - 12"

414
Heavy Duty Clamps
- 5 in total - includes one Bessey 8 1/2" - three 8" C clamps - one 10" C clamp

415
Bessey Clamps
- 5 in total - ratchet style - 9 1/2" to 12 1/2"

416
Heavy Duty Clamps
- includes 2 Bessey, ratchet style, 20" - includes 2 Bessey Classix, 14" & 20" - includes one bar style clamp - 5 in total

417
Bessey Clamp
- 4 Classix style - 20 1/2"

418
Bessey Clamps
- 2 F clamps - 1250 x 174 - STB125M

419
Bessey Clamps
- 2 F clamps - STB100

420
Bessey Welding Clamps
- welding angle clamp - WSM 12 plus second smaller - 2 clamps

421
Lever Blocks
- 2 in total - 3/4 ton lever block Kito Corp. Model L4 - smaller is 3/4 tin, larger is unlabelled

422
Transfer Punches
- 57 in total - ranging in size from 7 /64" to 1" - missing 4 from sets

423
Mobile Clamp Rack
- 50" x 28" x 69" - mesh shelf & base - 5" casters, 2 fixed, 2 swivel

424
Rockwell Grinder
- model 7 - wired 550 - three phase - 1/2 hp, 3400 rpm - on stand - tested & working

425
Kant Twist Clamps Plus
- 2 Kant Twist clamps, 6" - one pipe clamp, 79", 1" pipe

426
Heavy Duty Workbench
- 2" plate top - 85 1/2" x 30" x 28" (to top of work surface) with 24" upright right angle jig, 1 1/2" steel with 1 1/4" buttresses - with heavy duty drawer

427
Welder's Assortment
- burner head, new or rebuilt - flashback arresters - lines, clamps, regulator, gloves & more

428
Soothing Sound While You Work
- Pioneer mini stereo with speakers, receiver, dual tape deck, 3 CD changer - Panasonic mini stereo with speakers, receiver, dual tape deck, 5 CD changer - General Electric boom box

429
Heavy Duty Work Stands
- square tube construction - 23" x 22" x 42" - 34" x 24" x 28 1/2"

430
Workshop Needs
- metal cabinet 36" x 28" x 72', adjustable shelves, double door, contents included - handy carts to lend a helping hand: 2 wheeled dolly, torch or tank cart

431
Vises
- bench vise mounted on 1 1/2" x 1 1/2" tube - pipe vise

432
8' Fiberglass Ladder
- Industrial Lite - legs look good, no cracks noted

433
Tiger Torch
- with regulator & hose - tank NOT included

434
Lifting Clamps
- 2 clamps - see photos for design/style

435
Slings & Chokers
- lift straps - various lengths, widths & styles

436
Push Snow With Your Forklift?
- 37" reach - plate 45 1/2" x 21" - 30" centre to centre

437
Clevis & Eye Bolts
- 15 clevis various sizes - 7 eye bolts - as pictured

438
Chains
- both approx. 13'l - 3/8" links & 5/16" links - both with grab hooks

439
Chain Chokers/Slings
- lift your load safely - 3 in total, single & 2 double **To be picked up on the last day of pick up at the end of pick up**

440
Slings & Chokers
- lifting aids - various widths, lengths & styles

441
Liftmaster
- Professional by Chamberlain - garage door opener - appears to be working

442
Vintage Double Pedestal Desk
- metal desk, possibly fireproof - The General Fireproofing Company - included fluorescent light fixture, 48" - 60" x 34" x 30 1/2" **Extremely heavy! Bring help to move**

443
Welding Screens
- AGO Industries - approx. 51" & 70"w x 71"t - third screen 76"w x 81"t

443
Shop Time
- Lincoln Electric clock - quartz movement - 15" diam. - working but piece missing from rim

444
Metal Saw Horses
- 7" channel tops - 48"l x 32"h - guaranteed not to blow over

445
Collectible & Safety Security
- vintage Bailey No. 5 plane - warehouse caution signs - Emergi-Lite, untested - ball mount, end to go in receiver broken - ratchet straps

446
Hytrol 4A
- high ratio gear reducer gearbox - 20:1 ratio - turns

447
Lifting Help
- bottle & car jacks - 2 hydraulic bottle jacks - 8 ton jack works but need oil - larger jack works - includes scissor jack shown

448
Bessey Pair
- GRA 100 clamps - 1000 x 100

449
Bessey Trio
- GRA 30 clamps - 300 x 100

450
Magnum Cooler
- model 10 - with heat exchanger - status unknown

451
Pry, Hold & Level
- bench vise, 4" - load binder - Mastercraft 48" level - pry bar - includes diaphragm pump shown, status unknown

452
Fasteners, Hardware Plus
- nozzles - bolts - assorted fittings & caps - & much more *Bring your boxes to pack*

453
Work & Storage Space
- work bench 68" x 35" x 32" - tubular & angle iron construction - plate top 5/16" thick - welded construction shelving unit 78" x 42" x 73" - items under & on sold separately

454
MIG Welder
- Cobramatic - requires power source - status unknown

455
Redi Racking
- 4 columns approx. 17'h - 18 beams approx. 12'l - approx. 58 cross members

456
Lift & Carry
- Lift-Rite pump cart, fork 7"w x 48"l - dolly/cart with handle, base 26" x 16 1/2" x 6", swivel wheels on one end

457
Fiberglass Step Ladder
- Davidson 6' - adjustable legs - Type II commercial - legs are good, no cracks

458
Crate Lot
- carbon steel - flanges - connectors - caps, tees - elbows - reducers - assorted sizes - lots of weight here - 72" x 28 1/2" x 22 1/2"

459
Crate Lot # 2
- stainless steel - flanges - tees, elbows - connectors - caps - approx. half full - 46 1/2" x 25" x 28"

460
Chimney Liners
- carbon steel - 4 pcs., 1/4" thickness - approx. 59"t x 38 1/4" diam. - tacked at seam

461
Chimney Liners
- carbon steel - 4 pcs., 1/4" thickness - approx. 38 1/4" diam. x 47 1/2"t - 3 of 4 tacked at seam

461
Steel Rings
- 3 rings - 43 1/4" x 36 1/2" x 1/4" - 43" x 36 1/2" x 1/4" - 38 1/2" x 14' x 1/4" - all seams are tacked

462
Chimeny Liners
- carbon steel - 5 pcs., tacked at seams - 4, 1/4" thickness, 28" diam. x 36 1/2"t, 28" diam. x 36 1/2"t, 26 1/4" diam. x 24"t, 20" diam. x 28 1/4"t - 1, 3/8" thickness, 24" diam. x 19 3/4"t

463
Chimney Liners
- 2 pcs. - carbon steel 72"t x 38 1/2" diam. x 1/4" thickness - schedule 40 74"t x 20" diam. x 3/8" thickness

464
Carbon Steel Rings
- perfect fire rings - 3 pcs., 1/4" thickness - all approx. 38 1/2" diam. x 8"t - one of three has tacked seam

465
Welding Rotator/Positioner
- with foot control & speed control - 9" diam. chuck - does not respond to power, status unknown, as found - brand & model unknown

466
I Beam, Carbon Steel
- one 4" x 8" x 10', 1/4" thickness - two 8" x 8" x 13 1/2', 7/16" thickness - four 8" x 8" x 8 1/2', 5/16" thickness - six 6 1/2" x 8" x 9'l, 5/16" thickness

467
Carbon Steel Plate
- 4 sheets, 1/4" x 5' x 10' - 1 pc. 1/4" x 15 1/2" x 64" - 1 pc. 1/4" x 14" x 75" - 1 pc. 1/4" x 56" x 56" - 2 pcs. 3/8" x 64" diam. - 1 pc. 1/4" x 24" x 96" - 1 pc. 1/4" x 8" x 57" - 1 pc. 1/4" x 87" x 39" - 1 pc. 1/4" x 33" x 70" - 1 pc. 3/8" x 25"...

468
Stainless Plate
- 4 sheets - one 1/4" x 42" x 96" - one 1/4" x 48" x 96" - two 1/4" x 52 3/4" x 96" - 2 additional pieces, 1/4" x 31" x 36" & 3/16" x 38" x 29 1/2" - approx. 1600 lbs.

469
Carbon Steel Square Tubing
- 3 pcs. - 6" x 6" x 3/8" x 24' - Grd CSA G40.21-13 50W Class C - approx. 2000 lbs.

470
Carbon Steel Square Tubing
- 5 pcs. - two 5" x 5" x 9 1/6" x 24' - three 3" x 3" x 1/2" x 24' - approx. 2350 lbs.

471
Carbon Steel Square Tubing & Channel
- 6 pcs. - tubing, two 3" x 3" x 3/16" x12' - channel, four 1 1/2" x 3" x 3/16", two 12' , two 10' - approx. 400 lbs.

472
Square Tubing, Carbon Steel
- 6 pcs. - two 6" x 6" x 7/16" x 24' - one 5" x 5" x 1/4" x 24' - two 3 1/2" x 3 1/2" x 1/4" x 24' - one 3" x 3" x 1/8" x 24' - includes 4 shorter pieces, 5" x 3" x 5/16" 7' - approx. 3000 lbs.

473
Expanded Metal Grating
- stainless steel - 16 pieces, 18" x 48" - 1/16" thickness - 1/2" opening

474
Work Station
- metal work surface with 4" backsplash - 97 1/2" x 36" x 40" - wooden frame & lower shelf - 4" x 4" pressure treated legs & 2" x 4" construction

475
Acetylene Tanks
- two tanks, 19" tall - with torch heads, hose & gauges - as found

476
Aluminum Cladding
- some cut, some full sheets - 4" - 48" width - 4' to 9' lengths - various profiles

477
I Beams
- 5 pieces - height 4 1/2', Flange 4" - 5/16" web, 3 pieces, 23', 8', 8' lengths - 1/4" web, 2 pieces, 8' & 7' lengths - approx. weight: 500 lbs.

478
Carbon Steel Tubing
- 4 pieces - 5 x 5 x 1/4, 10' - 8 x 8 x 3/8, 11.25' - 6 x 4 x 1/4, 17' - 4 x 4 x 1/4, 21.75' - approx. weight: 1110 lbs.

479
Carbon Steel Tubing
- 6 pieces - 3 x 3 x 3/8, approx. 27' long - 5 pieces 3 x 3 x 5/16", 27' each - approx. weight: 1700 lbs.

480
Carbon Steel Tubing
- 12 pieces - 8 pieces, 1 x 3 x 3/16", approx. 27.5' long - 2 pieces, 4 x 3 x 1/4", approx. 27.5' long - 1 piece, 2 x 4 x 3/16", approx. 27.5' long - 1 piece, 5 x 3 x 5/16", approx. 17' long - approx. weight: 1550 lbs.

481
Carbon Steel Mixture
- angle iron, I beam, channel & tubing - angle iron, 5 pieces, 4 x 4 x 1/2", approx. 23' long - angle iron, 4 pieces, 8 x 4 x 1/2", approx. 9' long - angle iron, 1 piece, 5 1/2 x 4 x 7/16", approx. 11.5' long - angle iron, 1 piece, 5 x 5 x 5/8", appr...

482
Aluminum & Carbon Mixture
- Ibeam, channel, angle iron and more - aluminum Ibeam, 3 pieces, 6 x 3 1/2 x 5/16", 4.5' to 7.5' long - aluminum channel, 8 pieces, 6 x 3 1/2 x 5/16", 2' to 4 1/2' long - and other pieces - carbon steel angle iron, 7 pieces - painted bar, 2 pieces,...

483
A 36 Carbon Steel
- angle iron & more - angle iron, 10 pieces, 3 x 4 x 1/4", approx. 20' each - angle iron, 1 piece, 3 x 4 x 1/4", approx. 16' each - angle iron, 1 piece, 3 x 4 x 5/16", approx. 13.5' each - angle iron, 7 pieces, 3 x 3 x 1/4", approx. 5.5' long each - ...

484
A 36 Carbon Steel
- angle iron - 19 pieces, 3 x 2 x 1/4", approx. 20' each - 1 piece, 3 x 2 x 1/4", approx. 16' - 1 piece, 3 x 2 x 1/4", approx. 9' - 3 pieces, 2 x 2 x 3/16", approx. 20' - 4 pieces, 2 1/2 x 2 x 1/4", approx. 19' - 2 pieces, 3 x 2 x 1/4", approx. 20' -...

485
A 36 Carbon Steel
- angle iron - 18 pieces, 2 1/2 x 2 1/2 x 3/16", approx. 20' - 3 pieces, 2 1/2 x 2 1/2 x 1/4", approx. 20' - 2 pieces, 3 x 4 x 1/2", approx. 10' - 2 pieces, 2 x 3 x 1/4", approx. 20' - 2 pieces, 2 x 2 1/2 x 3/16", approx. 20' - 4 pieces, 3 x 3 x 3/6"...

486
A 36 Carbon Steel
- angle iron - 4 x 4 x 1/2", 1 piece @ 14.5' - 5 x 3 x 1/2", 1 piece @ 14.5' - 3 1/2 x 3 x 1/2", 1 piece @ 8' - 3 x 2 x 1/2", 3 pieces @ 20' - 3 x 3 x 1/2", 2 pieces @ 20' - 5 x 2 1/2 x 3/8", 1 piece @ 16' - 2 x 3 x 1/2", 1 piece @ 9.5' - 3 x 4 x 1/4...

487
A 36 Carbon Steel
- Bar - 4 x 3/8", 1 piece @ 10' - 4 x 1/4", 1 piece @ 6' - 6 x 1/2", 1 piece @ 15' - 5 x 1/8", 1 piece @ 8' - 3 1/2 x 1/2", 2 pieces @ 20' - 3 x 3/8", 1 piece; @ 19' - 4 x 3/16", 2 pieces @ 20' - 4 x 1/8", 1 piece @ 20' - 6 x 5/16", 1 piece @ 20' - p...

488
A 36 Carbon Steel
- tubing pipe and channel Tubing - 2 x 2 x 1/4", 4 pieces @ 24' - 5 x 2 x 1/8", 2 pieces @ 24' - 2 x 3 x 1/4", 1 pieces @ 24' - 2 x 3 x 3/16", 1 pieces @ 24' - 1 x 1 x 1/8", 5 pieces @ 24' - 3 x 3 x 5/16", 1 piece @ 23' - 2 x 3 x 3/16", 1 piece @ 24'...

489
A 36 Carbon Steel
- tubing & channel Tubing - 4 x 2 x 1/8", 2 pieces @ 18', 1 piece @ 15', 2 pieces @ 14' - 1 1/4 x 1 1/4 x 3/16", 1 piece @ 24' - 2 x 3 x 1/4", 1 piece @ 22' - 2 1/2 x 2 1/2 x 1/4, 1 piece @ 18' - 2 x 2 x 1/4", 1 piece @ 22', 1 piece @ 10' - 1 x 2 x 1...

490
A 36 Carbon Steel
- tubing & channel Tubing - 2 x 2 x 3/16", 4 pieces @ 24' - 1 1/4 x 1 1/4 x 1/8", 4 pieces @ 24' - 1 x 1 x 1/8", 4 pieces @ 24' - 1 x 3 x 1/4", 1 piece @ 24' - 2 x 2 x 1/4", 3 pieces @ 24' - 2 x 1 x 1/8", 1 piece @ 24', 1 piece @ 10' - 3 x 3 x 5/16",...

491
A 36 Carbon Steel
- 4 shelves - mixture tube, channel, bar and pipe - lengths up to 24' - approx. 25-33% the total weight of previous 8 lots

492
A 36 Carbon Steel
- pipe - 1/2" to 4 1/2" diameter - 1/8" to 1/4" wall thickness - lengths up to 20' - approx. 25 pieces

493
A 36 Carbon Steel
- pipe - 3/4" to 4 1/2" diameter - 1/8" to 1/4' wall thickness - lengthsup to 20' - approx. 15 pieces - includes one piece 2 1/2" diameter, 6 1/2' long

494
A 36 Carbon Steel
- tube, channel & pipe Tube - 3 x 2 x 1/8", 1 piece @ 28' - 3 x 1 1/2 x 3/16", 3 pieces @ 28' - 4 x 4 x 1/8", 1 piece @ 8' - 2 x 2 x 3/16", 1 piece @ 20' - 3 x 3 x 5/16", 1 piece @ 10' Channel - 3 1/2 x 8 x 1/2", 2 pieces @ 20' Angle - 6 x 6 x 1/2", ...

495
A 36 Carbon Steel
- angle iron, channel, tubing, I beam - lengths up to 20' - 1/4 to 5/8" thickness - see photos for details

496
A 36 Carbon Steel
- tube, channel & angle iron Tube - 2 1/2 x 2 1/2 x 3/16", 1 piece @ 22' - 2 x 2 x 3/16",1 piece @ 19' - 4 x 4 x 5/16", 1 piece @ 21' - 2 x 3 x 3/16", 1 piece @ 11' - 3 x 3 x 1/4", 1 piece @ 10' - 4 x 4 x 5/16", 1 piece @ 10' - 2 x 2 x 5/16", 1 piece...

497
Stainless Steel
- tube, bar, angle & channel Tube - 6 x 6 x 1/4", 1 piece @ 13.5' - 6 x 2 x 1/4", 1 piece @ 7' - 6 x 2 x 1/4", 1 piece @ 4.75' - 2 x 1 x 1/8", 1 piece @ 9.75' - 1 x 1 x 1/8", 1 piece @ 23' - 2 x 1 x 1/8", 1 piece @ 10' - 2 1/2 x 2 1/2 x 3/16", 1 piec...

498
Stainless Steel
- tube, bar and angle Bar - 4 x 3/16", 1 piece @ 11.5' - 2 x 7/16", 1 piece @ 12' - 1 1/2 x 1/8", 3 pieces @ 12' - 1 1/2 x 3/16", 1 piece @ 12' - 1 x 3/8", 1 piece @ 6' - 1 1/2 x 7/16, 1 piece @ 6.5' - 1 x 1/4", 1 piece @ 10' - 1 x 3/16", 3 pieces @ ...

499
Stainless Steel
- angle, tube, bar & channel Angle - 2 x 2 x 3/16", 1 piece @ 21' - 1 1/2 x 1 1/2 x 1/8", 3 pieces @ 8 1/2', 20' & 20' - 2 1/2 x 2 1/2 x 5/16", 1 piece @ 8' - 2 1/2 x 2 1/2 x 1/4", 1 piece @ 18' - 2 x 2 x 3/16", 1 piece @ 20' - 4 x 3 x 5/16", 1 piece...

500
Stainless Steel & Carbon Steel Mixture
Carbon Steel - channel, 12 x 3 x 5/16", 1 piece @ 9' - tube, 6 x 4 x 1/4", 1 piece @ 10' - tube, 1 1/2 x 3 x 1/8", 1 piece @ 24' - tube, 5 x 5 x 5/16", 2 pieces @ 24' and 12' Stainless Steel - tube, 4 x 4 x 3/16", 1 piece @ 9 1/2' - channel, 10 x 2 1...

501
Mixture of Stainless, Carbon & Copper
Stainless - angle, 2 1/2 x 2 1/2 x 1/16", 2 pieces @ 10' - tube, 3/8", 1/8" wall, 50 linear feet - pipe, 1" diameter, 1/8" wall, 1 piece @ 8 1/2' - 2" diameter, 1/16" wall, 1 piece @ 10' - 2" diameter, 1/8" wall, 1 piece @ 19' - 1 1/4" diameter, 1/8"...

502
Crib & Contents
- sheet metal, expanded metal, checker plate, wire mesh - stainless & carbon Stainless Wire Mesh, 5'10" x 4', sheet 4'x 8' x 3/16" thickness Carbon Plate - 3' x 5' x 3/16" - 4 1/2' x 4' x 1/2" - 2 1/2' x 5' x 7/16" - 5 1/2' x 4' x 1/2" - 4' x 8' x 1/...

503
Carbon Steel Pipe & Tube
Pipe - 1 1/2" diameter to 8 1/2", up to 24' lengths - 1 1/2" diameter, 3/16" wall, 1 piece @ 24' - 2" diameter, 1/4" wall, 1 piece @ 18' - 2 1/2" diameter, 1/4" wall, 1 piece @ 18' - 3" diameter, 1/4" wall, 1 piece @ 17' - 3" diameter, 1/4" wall, 1 p...

504
Carbon Steel Pipe
- 1/2" to 3 1/2" diameter - lengths up to 21' - thicknesses up to 1/2" - see photos - approx. 50 pieces

505
Stainless Steel Pipe
- 1/4" up to 4" diameter - assorted lengths up to 20' - 40 to 50 pieces

506
Stainless Steel Pipe
- 300 Series - 4 1/2" diameter, 3/16" wall thickness, 3 pieces @ 10.5', 15', 20' - 6 1/2" diameter, 7/16" wall thickness, 2 pieces @ 7' & 9.75' - 8 1/2" diameter, 5/16" wall thickness, 1 piece @ 21' - plus approx. 25 additional pieces of various leng...

507
Stainless Steel Pipe
- 300 Series - primarily Schedule 40 & 80 - up to 20' lengths - 1" to 5 1/2" diameter - 30 pieces plus

508
Tiered Rack Unit
- 16'4" long - 6' wide at base - 4 tiers - contents NOT included - constructed of 3 x 2 tubing - welded steel construction - not to be picked up until end of sale pick up - matches lot 509

509
Tiered Rack Unit
- 16'4" long - 6' wide at base - 4 tiers - contents NOT included - constructed of 3 x 2 tubing - welded steel construction - not to be picked up until end of sale pick up - matches lot 508

510
Double Cantilever Shelving
- 19' long - 9 1/2' tall - 82" wide - 4 columns at 9 1/2' high, 82" at base - 18 arms, 40" long - contents NOT included - to be picked up at end of sale pickup

511
Cantilever Shelving
- 85" long - 11'7" tall - 60" wide - 2 columns at 11'7" high, 60" at base - 8 arms, 52" long - contents NOT included - to be picked up at end of sale - unit currently tacked to building, bring torch or angle grinder

512
Tiered Steel Rack
- 14' long - approx. 63" deep at base - approx. 120" high - welded channel construction - 7 tiers - unit tacked to building, bring torches or angle grinder - to be removed at end of sale - contents NOT included

513
Aluminum Sheets
- partial sheets - 4' - 8'l - 2' - 3'w - 1/4" - 1/8"

514
Aluminum Sheets
- full & partial sheets - all 1/8" thick - two 120" x 60" - two 120" x 48" - 103" x 60" - 103" x 42" - 48" x 34" - 41" x 33" - 54" x 38" - 48" x 45" - 42" x 38" - 48" x 45" - 47" x 48" - 80" x 49" - approx. weight: 650 lbs.

515
Stainless Steel Sheets
- 60" x 54" x 1/8" - 70" x 48" x 1/4" - 64" x 20 1/2" x 1/4" - 53" x 60" - 48" x 120" x 1/4" - approx. 15 pcs. total

516
Aluminum Sheets
- 96" x 48" x 1/4" - 82" x 48" x 3/8" - 25" x 96" x 3/8" - 144" x 60" x 1/8" - 120" x 60" x 3/16" - plus 8-10 smaller pieces approx. 4' - 6'l, 48" - 60"w - approx. weights: 600 lbs.

517
Aluminum Sheet
- 144" x 48" x 3/8" - 1 pc. - with protective wrap - approx. weight: 254 lbs.

518
Carbon Steel Cutoffs & Partial Sheets
- one 120" x 60" x 5/8" - remainder ranges from 1/8" - 1/4" thick - various lengths and widths up to 10'l - large quantity

519
Pipe Assortment
- 126" length of 1 1/4" schedule 160 - low carbon schedule 80 - approx. 28 pcs. in total, 2 1/2' to 11' lengths - assortment as pictured

520
Counterbalance Weight
- approx. 13" x 13" x 10" - total height to top - guaranteed to keep your canoe from drifting

521
Hardware Assortment
- full thread stud 7/8 - 9 x 5 3/4" approx. 125 pcs. - nuts to fit studs - 5/8" x 4 1/2" zinc plate bolts - 3/4" x 3" zinc plate bolts - quantity of large washers - roofing screws - & more

522
Large Workbench
- approx. 199"l x 36"d x 40"h - 4" backsplash on back and one end - metal top, approx. 1/16" thick *Some disassembly may be necessary to move*

523
Time Clock System
- Simplex 100 with user guide, time card rack & buzzer - system in working order **Purchaser to remove from wall**

524
Fire Rings
- three 32" diam. x 8 1/4" x 3/16" - 32" diam. x 12" x 3/16"

525
Jobsite Box
- 36" x 25 1/2" x 21" plus handles - can be locked - steel construction

526
RC Cola Cooler/Dispenser
- 35" x 28" x 80" - set up for 8 varieties - will accept dollar coins - functional status unknown, as found

527
Generator
- Aztec generator, Tecumseh engine - 7250 max. surge output - three 120v outlets - one 240v outlet - unit has good compression, functional status unknown

528
Pallet Forks
- 4" x 48"

529
Tarps
- load tarps, fuel cans & tub - large heavy duty load tarp - light duty small poly tarp - plastic tub - 2 fuel cans

530
Welder & Cooler
- Millermatic welder style JK-33 - cooler with Procon pump - units as found, functional status unknown

531
Pipe
- Shedale 40, 10" diam. x 60" stainless pipe - 3 fabricated pieces - approx. 15 1/2" diam. x 18"

532
Port-A-Spot Welder
- by Control Systems, Windsor Ont. - unit as found, functional status unknown

533
MIG Wire Feed & Cooling Pump
- Linde WC-5 cooling pump - Linde MIG-35 wire feeder - fire extinguisher, welding hose & torch tip - all as found, functional status unknown

534
Rotator
- foot control - MSC speed control - unit as found, functional status unknown

535
Aluminum Stock - Extruded T65
- angle 6" x 4", 4" x 4", 2 1/2" x 2", 3" x 2 1/2" - approx. 16 pc. are 20 plus some shorter ones - primarily 1/4" & 3/8" thickness - bar & tube stock, 8' to 20' lengths - 6 pcs. are 20', 6 pcs. are shorter

536
Sea Container
- approx. 30'l x 8'w x 8 1/2"t - aluminum, hinged, flip out ramp with counterweights - contents NOT included

537
Steel Work Table
- 88" x 57" x 32" - 5/8" work surface - lower storage shelf

538
Steel Storage Bins
- pair of steel storage boxes - wire mesh & tubular steel, 2 drop down sides, 40" x 35" x 32" - welded steel, 41" x 29 1/2" x 29 1/2"

539
Steel & Racks
- tubing, channel, angle, pipe, I beam - largest pipe 20" diam. x 19' x 3/8" thickness - second pipe 14" diam. x approx. 12' x 3/8" wall thickness - 12" I beam, approx. 8'l - bar stock 2 1/2", 3 1/2", 4 1/2"w, 1/2" to 1" thickness, various lengths - ...

540
Metal Cutoff Saw
- with vise & roller feed - approx. 14" blade - 1725 rpm, 3hp - untested, power cord cut off - included wooden trolley, solid rubber swivel casters

541
Aluminum Pieces
- 1 pc - 5' x 6' x 5/8" aluminum - 5 pcs - 5' x 5' 8" x 3/8" Aluminum - 1 pc - 6'-2 x 25" x 1/8 Aluminum - 1 pc 4' x 40" x 1/8 Aluminum - 1 pc 49" x 22" x 1/8 Aluminum - 1 pc 4' x 34" x 1/8 Aluminum

543
Aluminum
- 1 pc - 5' x 6' x 5/8" aluminum - 5 pcs - 5' x 5' 8" x 3/8" Aluminum - 1 pc - 6'-2 x 25" x 1/8 Aluminum - 1 pc 4' x 40" x 1/8 Aluminum - 1 Pc 49" x 22" x 1/8 Aluminum - 1 pc 4' x 34" x 1/8 Aluminum

542
Hitachi Cordless Hammermill Dril
- model DV 18DL - comes with three chargers for batteries - tested and working

543
2 Steel Shelving Units
- approx. 6' x 6' x 24" - very structurally strong - contents on shelves not included to be picked up late Tuesday

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Large Welding Shop Auction for PDS Welding - Milton

Rapid-Sell c/o David Moore & Associates Inc.

Rapid-Sell c/o David Moore & Associates Inc.


Contact:
Phone:
Sale Location
Milton, ON L9T 5A6
Full Address Available after 9 am
on Saturday, Sep 15
Sale Dates and Times
Sale Terms and Conditions
Terms and Conditions - To Bid and Buy REGISTRATION & IDENTIFICATION: At the time of registration, we collect information about you to verify who you are before you can bid. We collect credit card information to ensure that you are a qualified buyer. All bidders must be of legal age to bid. PAYING FOR YOUR PURCHASES: There is no cost to register for an auction. Your credit card will not be charged unless you win. When an auction closes, if you are the winner, we will charge your credit card with the winning bid amount, plus applicable Buyers Premium and taxes, as stated in terms of auction. Credit Cards include Visa and Mastercard only. Vehicles must be paid for entirely by bank draft either prior to or at time of pickup. REVIEWING YOUR BIDS: During an auction you can check the status of your bids at anytime. Note that no bids can be withdrawn after the auction for any reason. All items are sold as is, where is, with all faults. BIDDING NOTIFICATIONS: You can choose to be notified by e-mail during the auction if you have been outbid. Please note that outbid notifications are NOT sent out during the last two hours of the sale. WINNING NOTIFICATION & INVOICING: All winning bidders will receive an e-mail with an attached invoice from sales@rapid-sell.ca the morning after the auction closes. If you'd like to know whether you won a lot at the close of the auction, check your "bidder history" -- if it says "you will be notified" that means you are the high bidder on the lot. If you are not the high bidder, it will say "you have been outbid." PICKUPS & REMOVALS: Dates and times for pickup will be posted on our website. We do not ship. Do not bid if you are unable to have your items picked up. Any item not picked up during the posted pickup times will be considered an abandoned item. Items are sold as is, where is, with all faults. If you abandon or fail to pick up an item, your credit card will be charged for the purchase price of the item plus a minimum administration fee of $25 plus labour and trucking fees to remove the purchased items from the auction site during the scheduled pickup time. CONDITIONS OF ITEMS SOLD & OUR ONLINE CATALOGUE: Our best efforts are made to represent all items accurately in descriptions and photographs; however, all items are ultimately sold on an 'as is, where is' basis, with all faults. We strongly encourage all bidders to personally verify the condition of each item during the scheduled preview times. No responsibility is assumed by Rapid Sell or the seller for any errors or omissions. CLAIMS: No claims regarding goods purchased will be allowed. Bidders are reminded that all goods are sold on an 'as is, where is' basis, with all faults. PERSONAL & PROPERTY RISKS: We will not be liable for damage or injury to individuals or their property. ADDITIONS & DELETIONS: We reserve the right to remove and/or add lots and/or items to the sale at any point during the auction. BUYERS: The BUYER expressly agrees to indemnify and save Rapid Sell, the Seller and their assigns harmless from and against all claims, losses, expenses, damage or liability, directly or indirectly caused by or resulting from an act, including the negligent acts or omissions of Rapid Sell, or anyone acting in his/her behalf in connection with or arising out of auction. All bidders/buyers must be of legal age. RESERVE: Seldom are items sold with Reserve. If an item is being sold with a reserve, it will be clearly marked and identified. For items sold with a 'reserve', you will be required to pay a minimum amount in order to win the item. AUCTION RECORDS: In the unlikely event of a dispute, you agree to accept as true the information that we have in our records. SOFT CLOSE: Items close at regular intervals. To prevent a bidder from 'sniping', all bids made in the last minute of the auction will force an item to stay open for an additional 3 minutes. This will continue until all bidding has ceased. STRATEGY: We recommend that ALL BIDDERS put in their maximum bid when placing a bid online. This does not mean you will have to pay the amount you bid; you only pay one bid more than the next highest bid, and only up to your maximum bid. The software system will play out the bids as you would at a live auction and only uses the funds required to beat out the under-bidder at the prescribed bid increment. CATALOGUE ERRORS & OMISSIONS: If a description does not match a picture in a lot, the description takes precedence. All items are sold on an 'as is, where is' basis, with all faults. EMAIL COMMUNICATIONS: As per Canada's new anti-spam legislation (effective date July 1, 2014), we are required to secure your consent to communicate with you electronically. By registering for this auction, you are opting in to receive auction notices from Rapid-Sell.ca (sales@rapid-sell.ca). You may withdraw your consent at any time by clicking on the unsubscribe link contained within each auction notice. Your privacy is important to us -- your email address will not be shared with any other party. By bidding you are acknowledging agreement with the terms above.Do not bid unless you agree to all of these terms.
Listing Details

1
Lincoln Electric Precision TIG Welder
- square wave power source, Microstart II - with ground clamp & cable plus TIG torch & stick welder - pulse feature - with DC & AC - includes regulator but not bottle shown - water cooled - in working order - 600/460/230

2
Lincoln Electric CV300 MIG Welder
- wired 600 - with wire feed, LN-7 - includes ground clamp & cable - includes regulator but not bottle shown - in working order

3
Lincoln Electric 355 TIG Welder
- square wave - AC/DC TIG & stick arc electrode holder & cable - with ground clamp & cable - 575v - water cooled ?? - in working order

4
Lincoln Electric CV250 MIG Welder
- with wire feed LN-7 - custom made base with swivel casters and arm extension for wire feed, approx. 8' - 230/60/575, wired 575 - with ground clamp & cable - does not include tank shown - in working order

5
Lincoln Electric CV-250
- MIG welder with wire feed LN-7 - custom made base with casters, 2 fixed 2 swivel - 230/460/575, wired 575 - with ground clamp & cable - does not include wire or tank shown

6
Lincoln Electric Power MIG 350 MP
- MIG welder - 230/460/575, wired 575 - with ground clamp & cable - does not include tank shown - in working condition - TIG capabilities, scratch start

7
Miller Delta 450
- DC arc welder power source - includes additional Miller DVC DW2 MIG welder - includes ground clamp & cable - dual wire feed with 2 whips - in working condition - 230/460/575, wired 575, 3 phase

8
Lincoln Electric Power MIG 350 MP
- MIG welder - with ground clamp & cable - does not includes tank shown - 230/460/575, wired 575 - in working condition - TIG capability, scratch start - with push/pull whip

9
Lincoln Electric TIG 355
- square wave AC/DC TIG & stick arm welding source - 230/460/575, wired 575 - with ground clamp & cable - does not include tank shown - not working, unknown problem - no whip or electrode holder

10
Lincoln Electric Ranger 250
- generator/welder - gas powered Kohler engine - 25hp, 8000w output as auxiliary power source - showing 477 hours - set up currently as stick welder - includes ground clamp with cable, electrode wand & cable - in working condition

11
Lincoln Electric TIG 355
- square wave AC/DC TIG & stick arc welding power source - 230/460/575, wired 575 - does not include tank shown - includes ground clamp & cable - includes TIG torch & foot control pedal K870 Amptrol - in working condition

12
PT-32 Torch
- Power Torch 11.25, ESAB - plasma arc cutting torch - wired 575 - includes custom made cart, 2 swivel & 2 fixed front casters

13
Welding Positioner/Rotator
- IRCO - model 3K6X6AB, serial 14308 - max load torque 18,000 lbs in rotation, 37,000 lbs. in tilt - includes IRCO control unit, model 14308 - with foot controller

14
Welding Positioner/Rotator
- IRCO Automation - model 3K6X6 - max load torque 18,000 in rotation, 30,000 in tilt - IRCO controller & foot pedal

14
Ameri-Can Upcut Saw
- with Tiger Stop push/pull positioner - 3 phase - foot pedal control - includes 6 blades, 15 1/2" diam., 1" arbor, 3 freshly sharpened, 3 without protective coating - 8' & 10' Tiger Stop roller tables, 18"w with Tiger Stop controllers - purchased us...

14
IRCO Rotator Accessories
- work supports - small chuck (fits inside main chuck) - two 8" casters on 36" beam - two 6" caster on 60" beam

14
550 Extension Cord
- approx. 45'l - working

15
Welding Positioner
- Irco - 575v, 3 phase - with foot control - tilt & rotate - footprint 43" x 50" - working

16
Miller Dimension 452
- CC/CV DC welding power source - with ground clamp & cable, electrode wand & cable - in working order

17
Sub Arc Machine
- 3 phase, likely 550 - approx. 12 1/2" mast, arm approx. 14 1/2"l, footprint 8' x 4' x 2" plate base - power source LIncoln Electric Ideal Arc DC-600 - wire feed Lincoln Electric NA-3N - has not been used in last 2 years **Purchaser to disassemble**

18
ESAB CV 450
- constant voltage welding machine - with ESAB MIG 35 - with ground clamp & cable - includes power cable - in working order - with custom made cart, 2 swivel & 2 fixed casters - 230/460/575, wired 575

19
Lincoln Electric CV-305
- MIG welder - with LN-7 wire feeder - includes whip, ground clamp & cable - 230/460/575, wired 575 - does not includes tank shown - in working order

20
Piranha P50 Iron Worker
- punch, shear & copper/notcher - 68" x 36" (at base) x 60" - foot control - 575 - includes 2 new punches - with notcher attachment also - in working order

21
Bee Metal Sander
- model 40P - serial 394 - belt sander 4"w - 51" x 33" x 42" - comes with 8 new belts, 36 grit - 575 - can be used in vertical or horizontal position - in working order

22
Leten Bandsaw
- DCM-4 - tabletop 23 1/2" x 19 1/4" - throat approx. 16 1/2" - variable speed - 43" x 27" x 77 1/4" - 575 3 phase

23
MAS Radial Drilling Machine
- model VR4A - 1500mm radial drill - 50 mm drill diam. - 1500 mm boom length - in working order - with vice as pictured, 10" - base footprint 88" x 35 1/2" - needs approx. 11 1/2" to expand to full height - new 5.5hp motor, 3 phase - includes chuck s...

24
Complex Drilling & Milling Machine
- model DM-30 - 12 speed - mill/drill/tap/bore/ream - includes 6" vice, as shown - mounted to steel table 46" x 27" x 32 1/2" - overall height approx. 88" - 110 - includes top cover, not shown

25
Lathe
- Potisje-Morando - bed approx. 90" end to end - includes centre support, chuck & tail - approx. 24" capacity - approx. 128" x 39" x 51"

26
Ridgid Auto Chuck Machine
- 535A series threading machine - with foot switch - with reamer, die head - on pipe stand 43" x 27" x 44" - 120v

27
Hyd-Mech Bandsaw
- model S-23 - pivot style mitering bandsaw - light to medium duty applications - table 70" x 19" - feed side 44" - 5 hp, 575v - 97" x 70" x 63" - includes 2 new blades in boxes

27
Roller Feed Table
- 153'l, roller spacing 6" & 12" - 20"w - 32"t - does not include metal shown stored under rollers

28
RCS 5 Ton Overhead Crane
- includes crane, crossbeam & tracks - approx. 30 1/2' span, approx. 110'l ***Purchaser to arrange disassembly. Pick up by appointment**

29
RCS 5 Ton Overhead Crane
- includes crane, crossbeam & tracks - 2 speed track drive - approx. 29' span x approx. 80'l **Purchaser to arrange disassembly. Pick up by appointment**

30
RCS 2 Ton Overhead Crane
- includes crane, crossbeam & tracks - approx. 23' span x approx. 51'l **Purchaser to arrange disassembly. Pick up by appointment.**

31
RCS Jib Crane
- 1000 lb. capacity - approx. 14' length *Purchaser to disconnect power cable at disconnect box*

32
RCS Jib Crane
- 1000 lb. capacity - approx. 14' length *Purchaser to disconnect power cable at disconnect box*

33
RCS Jib Crane
- 1000 lb. capacity - approx. 14'l *Purchaser to disconnect power cable at disconnect box*

34
Acetylene Torch
- includes heavy duty cart, lines, regulators & torch - tank not included - 14" solid rubber tires on cart

35
Clark Forklift
- 2 stage mast - propane - solid rubber tires - model C500-50 - no side shift - forks with extensions, approx. 86"l - leakage in hydraulics - needs extensive work for certification **No propane cylinders included, purchaser must provide** * Forklift ...

36
Clark Forklift
- model C500.50 LP - propane powered - solid rubber tires - 3 stage mast, side shift - 42" tires - leakage in hydraulics - needs extensive work for certification **No propane cylinders included, purchaser must provide**

37
Trinco Dry Blast
- sandblaster & supply tank - model 48X36-BP - includes pails full & partial bag of sand shown - Ebony-Grit copper slag by Opta Minerals

38
Partial Skid Sand Blast
- approx. 17 bags - 55 lbs./bag - Ebony-Grit copper slag Opta Minerals

39
Hotsy Pressure Washer
- steam cleaner - power by diesel, kerosene or Nol Heating Fuel - see photos for model, serial numbers & further information - in working order

40
Devil Bliss Air Compressor
- model 445 - Baldor motor 10hp - 575v - approx. 120 gallon tank *Purchaser to disconnect air at wall and BX cable at box*

41
Miller Portable TIG Welder
- Maxstar 150 LT - 115/230, currently 230 cord - in hard body case - with foot pedal controller RFCS-6M - includes ground clean up & cable - refer to photo for everything included in this kit

42
New & Used
- Blackstone ACF9005, used, untested - ESAP plasma cutting torch line, used, as found - see photos

43
Victor Cutting Gear
- 350 series regulator, acetylene - cutting tip, goggles , sparker - 1/4" x 25' grade RM dual holding hose - all new

44
Ramset Dyna Drill
- rotary hammer - model 332 - tested & working - includes Condrive 1000 in case - assorted bits, Ramset & UCAN - UCAN hammer caps

45
DeWalt Bandsaw
- heavy duty deep cut variable speed - model D28770 - in hardbodied case - tested & working - includes 2 extra blades

46
UCAN Fastener
- model LV470 - includes Winchester strip tools 5LV527, red - in hardbodied case

47
Milwaukee Sawzall
- heavy duty - model 6527 - tested & working

48
Fein Angle Grinder
- German made - model WSG12-70E - 120v - 2700 - 7000 rpm - tested & working

49
Portable Cutter
- Steel Max - 7.25" - model 2802 - 3500 rpm - tested & working

50
Makita Pair
- circular saw, 7 1/4", model 5007NF, 5800 rpm, working - hammer drill, model HP2010N, concrete/steel/wood, needs repairs

50
Bosch Drill Plus
- 18v Brute, tested & working, in hardbody case - includes Mastercraft angle grinder with assortment of grinding stones, 4 1/2", 7 amp, tested & working

50
Clamps & Pullers
- Stabil specialty clamp set, 4 clamps - 6" & 8" gear pullers

51
ER316/316L TIG Rod
- 2 full boxes, 10 lbs. each - 1/16" diam. - heat # 178336

52
ER 410 TIG Rod
- approx. 1.3 boxes, total approx. 13 lbs. - 3/32" diam. - heat # 43146

53
Executive 410 TIG Rod
- class ER410 - .062" diam. - heat # E31355 - almost full box 8 - 9 lbs.

54
Tech Alloy 410 NiMo TIG Rod
- class ER410 NiMo - 1/16" x 36" - heat 567721 - full box, 10 lbs.

55
Tech Alloy 410 NiMo TIG Rod
- class ER410 NiMo - 1/16" x 36" - heat 567721 - 2 partial boxes, approx. 10 lbs.

56
Lincoln Electric TechAlloy 410 NiMo TIG Rod
- class ER410 NiMo - 3 3/2" x 36" - full box, 10 lbs.

57
Weld Mold Company TIG Rod
- 938 FCT - 1/16" x 36" & 3 /32" x 16" - 2 partial boxes, approx. 16 lbs. (approx. 8 lbs. in each)

58
Executive 410 TIG Rod
- class ER410 - heat E31355 - .062" x 36" - partial box, approx. 5 lbs. - includes approx. 8 lbs. Executive 99 MIG rods, .093" diam.

59
Monel TIG Rods
- filler metal 60 - N60-093-10TS - heat M87W9G - .093" x 36" - full box, 10 lbs.

60
Exocor 320LR TIG Rods
- class ER320LR - heat QM763 - .062" x 36" - approx. 9 lbs.

61
Lincoln Electric & Unitec TIG Rod
- Lincoln Electric TechAlloy 410 NiMo, 3/32" x 36", approx. 5 lbs. - Unitec C32T16, 5/64" x 36", approx. 5 lbs.

62
Exocor TIG Rod
- ER1205-1 - 3/32" x 36" - partial box, approx. 8 lbs.

63
Inconel & Nickel TIG Rod
- Inconol Filler Metal 718, heat HT3189EY, .093" x 36", approx. 3 lbs. - Inconol Filler Metal 710, heat HT78W1Ey, .062" x 36" approx. 1 lb. - Nickel Filler Metal 61, heat NN6045HR, .125" x 16", approx. 5 lbs.

64
Inco Weld & Executive 410 TIG Rod
- Inco Weld ER317L, 1/8" x 36", approx. 8 lbs. - Executive 410, class ER410, .125" x 36", approx. 14

65
Blueshield & Executive TIG Rod
- Blueshield 308", class AWS ER308L, stainless rods, heat E100131, .062" x 36", approx. 3 lbs. - Blueshield 630-308L, stainless rods, heat 4D354, 1/8" x 36", approx. 1 lb. - Executive 99, class ERNi-cl, heat 201305-35001, .093" x 36", approx. 1 lb. -...

66
Rod Holder
- custom built aluminum - 20 compartments - approx. 28 1/2" x 12 1/2" x 26 1/2" - great for organizing rod, doweling or whatever - contents sold separately

67
ESAB MIG Spools
- Dual Shield FC 717 - 1/16", 60 lb. spool - 2 spools

68
ESAB MIG Spools
- Dual Shield FC 717 - 1/16", 60 lb. spool - 2 spools

69
ESAB MIG Spools
- Dual Shield FC 717 - 1/16", 60 lb. spool - 2 spools

70
ArcWeld MIG Spools
- EasyArc 706.045, mild steel wire - 1.1mm, 44 lb. spool - 2 spools

71
Lincoln Electric MIG Spools
- Techalloy 418 - MG418045667 - .045", 33 lb. - 2 spools

72
Lincoln Electric MIG Spools
- Techalloy 418 - MG418045667 - .045", 33 lbs. - 2 spools, 1 without box

73
MIG Spools
- NS 115 CF - .045" & .035" - 2 partial spools, approx. 25 lbs.

74
Lincoln Electric MIG Spools
- Super Glaze 5356 - aluminum MIG wire - .035", 20 lb. spool - 2 spools

75
Lincoln Electric MIG Spools
- Super Glaze 5356 - aluminum MIG wire - .035" - 2 spools, 1 partial, 1 full, approx. 30 lbs.

76
ER 4043 MIG Wire
- Lincoln Electric Super Glaze - 4043, 3/64" 20 lb. full spool - InWeld ER4043, 3/64" approx. 15 lbs.

77
ER 5356 MIG Wire
- Thermacote Welco, 1/16", 13 lb. spool - Harris Welco, .035", 10 lb. spool

78
MIG Wire, Nickel
- Executive 61, class ER Ni-1, .035", approx. 10 lbs. - Unibraze, class ER Nicu-7, .045", approx. 10 lbs. - Techalloy ERNicu-7, .035", 1 lb.

79
MIG Wire, Aluminum
- Indalco 5356, 3/64" - second spool, 3/64" - approx. 15 lb. total

80
ER 317L MIG Spool
- 2 spools, each 30 lbs. - Inco-Weld - .035" & .045"

81
NR-211MP MIG Spools
- Lincoln Electric Inner Shield - .045", approx. 40 lbs.

82
Gas Shielded Core Wire
- MIG spools - Lincoln Electric Outershield, 71M Ar/CO2, 2 partial spools, .045", approx. 5 - 7 lbs. - Lincoln Electric Metal Shield, MC-6 Ar/CO2, .045, 33 lbs. - Lincoln Electric Outshield, 71M, Ar/CO2, partial spool, 1/16" approx. 5 lbs.

83
Lincoln Electric MIG Spools
- Outershield 71M - 0 .045", approx. 50 lbs.

84
INCO-Weld MIG Spools
- ER-410 diam. .035", 30 lbs. x 2 spools - ER-410, diam. .035", very small amount - ER-410, diam. .045", approx. 7-8 lbs.

85
Metalloy 110
- .045" diam. - approx. 35 lbs. (full spool & partial)

86
Stainless Steel Wire
- ER308L, .035" diam., 25 lbs. - ER309L, .035" diam., approx. 15 lbs. - 309LSI, .035" diam., 25 lbs. - 316L, 3/32", approx. 50 lbs.

87
Nickel Alloy
- Inconel ERNICRNO-3, .045" diam., approx. 10 lbs. - Exocor 410 NiMo, .035", 12 - 15 lbs. - TechAlloy ERNiCu-7, .035" diam., approx. 5 lbs. - Unibraze ERNi-1, .035" diam., 33 lbs.

88
ESAB MIG Wire & Tips
- ER5356 HQ - one 16 lb. spool of 3/64" (1.2mm) diam. - ten 1 lb. spools of .035" (0.9mm) diam. - 2 pkg. (10 pcs.) 035MT style contact tips

89
Aluminum Welding Wire
- two 1 lb. spools ER5356 alloy, .90mm - 15 x 1 lb. spool 5554 alloy, .045"

90
Lincolnweld L-61 Coiled Wire & Reel
- 5/64' (2 mm), approx. 60 lb. coil - with a 17 1/2" diam. wire reel - includes partial spool ER805-B2

91
Special Metals Filler Metal
- 30 lb. spool NI-ROD filler metal 99, .045" diam. - 50 lb. spool MONEL filler metal 60, .093" diam.

92
Blueshield & Stoody MIG Wire
- Blueshield LAC-6, 45 lbs. spool, .052" - Stoody Company 965-G, .045", 33 lbs.

93
Lincoln Electric MIG Wire
- Outershield 71M, .045", 25 lbs. - Outershield MC-710, .045", 25 lbs.

94
Bonarc E309LT-1 MIG Wire
- 2 spools, 1/16" - both appear full - 30 kg.

95
MIG Wire
- Aversta Welding ER310 stainless, .035", 25 lbs. - Lincoln Electric Innershield NR-211-MA, .035", 25 lbs.

96
Lincoln & Techni Weld
- MIG wire - Lincolnweld L-50, .03", 30 lbs. - Techniweld, silicon bronze, alloy 656, .035", 25 lbs.

97
ESAB Dual Shield MIG Wire
- Dual Shield 7100 Ultra, .045", 33 lbs. - Dual Shield II 110, .045", approx. 20 lbs.

98
Stainless MIG Wire
- Kobelco, Premiarc EW-317L, .045", 28 lbs. - Inco Weld, Duplex 2209 ER2209, .045", approx. 20 lbs.

99
Stainless & All Purpose MIG Wire
- Cor-Met 410-FC-G, .045", approx. 25 lbs., stainless - Innershield NR-211MP, .035", approx. 25 lbs.

100
Assorted MIG Wire # 1
- ESAB Coreweld Ultra, .052", approx. 20 lbs. - ESAB Coreshield 15, .035", 10 lbs. - Lincoln Electric Metalshield MC-706, .045", approx. 15 lbs. - plus 4th partial spool

101
Assorted MIG Wire # 2
- 4 partial spools - includes approx. 5 lbs. Sodel 8259, Tungsten, carbide, diam. 1/16"

102
MIG Copper Coated & Others
- Techniweld ER-705-6, 2 spools, .023" diam., 33 lbs. & .030 diam., approx. 20 lbs. - Unitec Super 7, .045" diam., approx. 40 lbs. - includes 4th partial spool

102
Executive Furniture
- cherry finish - desk & credenza - 72" x 36"x 29 1/2", twin pedestal, 6 drawers - 66" x 20" x 29 1/2" - some scratches & scuffing noted - contents NOT included - includes carpet saver & chair shown

103
Rod Assortment # 1
- approx. 17 partial pkg. - primarily TIG - some flux coated brazing rod - lots of value here

104
Rod Assortment # 2
- approx. 30 partial pkg. - primarily TIG - aluminum, copper, nickel, stainless - check out the photos for the value here

105
Rod Assortment # 3
- approx. 14 partial pkg. - plus 2 storage tubes - many aluminum filler rods - plenty of value here

106
Gouging Rod
- copper clad pointed electrodes - 7 full & partial packages - 3/16", 5/16", 1/4" & 3/8" x 12" sizes - estimated to be 200 plus rods

107
Welding Electrodes
- 7 pkg., 1 full, 6 partial - full (11.2 lbs.) 253MA, 5/32" diam. - partials as pictured - includes 316L-17, 309L, 316L, E317-17

108
Welding Electrodes
- 6 pkg., 2 full, 4 partial - 7018-1 MR, 11 lbs. full - 316", 5/32", full - partial 316", E7018, 308-16

109
Welding Electrodes
- 6 pkg., 1 full, 5 partial - Monel N190, 10 lbs., 1 full - McKay, sterling 316L, partial - Blueshield, cast 99, partial - Sodel 309L-16, stainless, approx. 10 lbs.

110
Welding Electrodes
- 5 pkg., 2 full, 3 partial - Avestra 347/MVNb full, approx. 12 lbs. & partial - Avestra 347/MVNb partial - Unitec cast C-32 partial - Easy Arc 528 MR full, 4 kg.

111
Welding Electrodes
- 7 pkg., 3 full, 4 partial - McKay, 410 AC-DC, 1 full 4.54 kg., 2 partial - McKay, sterling 309L-17, 1 full, 4.54 kg, 1 partial - Sodel E309L-16, full, 11 lbs. - ESAB 317L-16, partial

112
Welding Electrodes
- 6 pkg, 3 full, 3 partial - ArcWeld Easy Arc 528MR, 1 full 4 kg, 2 partial - Lincoln Electric Excalibur 7018-1MR, full 5 kg - ESAB E7018-1, opened but appears full, 6 kg. - ESAB 7018-1, partial

113
Welding Electrodes
- 6 full boxes - Blueshield LA-7018 - 11 lbs. each

114
Welding Electrodes
- 7 boxes, 2 full, 4 partial - Lincoln Electric E7018-1, full box, 5 kg - E76018-7, full box, 5 kg. - ESAB E7018-1, almost full, 11 lbs. - 7018, large diam. - BOX, E7024 full 5kg., opened - Inweld SX544, partial - Arctec 2655 AC-DC partial

115
Welding Electrodes
- 5 boxes, 2 full boxes, 3 partial - Avestar 253 MA AC/DC, full box, 11 lbs. - Weld Mold 9580, full, 10 lbs. - Weld Mold 958, 1/8" & 5/32", 2 partial boxes - McKay sterling 308L-17, partial

116
Welding Electrodes
- 5 boxes, 3 full, 2 partial - McKay sterling 308L-17, full, 6 lbs. - McKay 330 AC/DC, full, 6 lbs. - ESAB E701-1, full, 6.2 lbs. - ESAB E308L-17, partial - Bonarc E308L-16, partial

117
Welding Electrodes
- 11 pcs. boxes & airtight containers - 6 boxes electrodes, 5 containers with electrodes - ESAC E316L-17, 2 full containers (1 opened) 4.3 kg. each - ESAB 7018-1, full & partial, 10 lbs. - Avesta 253 MA AC/DC, full, 11.2 lbs. - BonArc E308L-16, parti...

118
Welding Electrodes
- 3 full pkg. R308L-14 5/32" diam., 9.2 lb. each - partial pkg. R308L, 1/2 lb. - full & almost full E309-16, 3/16" diam., 19 lbs. total - full 309LC, 1/8" diam., 10 lbs. - full 316-16 5/32" diam., 10 lbs.

119
Welding Electrodes
- 14 boxes, 12 full - Bohler E312-16, 4 full boxes, 10 lbs. each - Bohler E410-16, full box, 4.5 kg. - MG stainless steel electrodes, Slik Stik 6309-L, full box, 10 lbs. - Bohler E502-16, 6 full boxes, 10 lbs. each - Bohler E347-16, 2 full boxes, 10 ...

120
Welding Electrodes
- 7018 & 8018 - 7018, 3 full boxes, 2 full tubes - 8018, 5 full tubes

121
Welding Electrodes
- Sodel 308L-16 x 27, 309L-16 x 2 - 29 full tubes - 10 lbs. each

122
Welding Electrodes
- Arcos E316L-16, 7 tubes, 10 lbs. each - Red Baron 317L-16, 2 tubes, one opened but full, 7 lbs. each - Inco 6280, 4 tubes, 4.5 kg each - All State H57, 2 tubes, 10 lbs. each - P7 AC/DC 1 partial tube - Incenel 132, partial tube

123
Welding Rod for the Vintage Shop
- 6 cans Lincoln Electric, unopened - 8018-CI MR - 5/32" - 50 lbs. each

124
Anti Spatter Compound
- 208 L barrel with pump - estimated to be 2/3 full

125
Welding Cable
- 2 gauge - 600v - approx. 50m combined

126
Welding Cable
- 2 gauge - approx. 40m - includes 2 cables with terminals each end, approx. 10'l

127
Welding Cable
- 2 gauge - 2 partial spools - 600v - approx. 420' total

128
Granular Flux
- 2 full pails Inco Flux 5, submerged arc flux - almost full pail Ultra Synthetic 951 - partial tin pail, unidentified product - 2 bags OK Flux, 10.16 & 10.90

129
Work Safely From Heights
- 3 safety harnesses - 2 tethers

130
Ground Cables & MIG Torch
- 2 ground cables, both with clamps - MIG torch ST-23A with lines - status unknown

131
Welding Helmets Plus
- 7 welding helmets, auto darkening in need of maintenance or repairs - 2 bump hats, white - 1 safety visor

132
Q Gun Cable Assembly Plus
- new Q Gun Cable Assembly, 15' - new inert gas hose, 10', with fitting - Lincoln Electric connector & tips, new

133
Tiger Torches
- 41" torch wand for propane - hand torch & line with regulator, propane tired

134
Shelf Lot
- lines & weld craft gun - cutting tips, new - copper tubing, cable - regulator, foot control - pipe cradles & more - all items as found

135
Hardware & Fasteners
- finished hex nuts grade 5 - 1/2" zinc washers - 5/8" x 2 1/2" grade 5 bolts - wood screws - & more - partial containers

136
Milwaukee Cut Off Saw
- 14" abrasive cut off - heavy duty model 6175 - 120w - 3500 rpm - tested & working

137
Welding Rod Oven
- 22 1/2"t - 11" overall width - 7" oven diam. - untested

138
Trumpf Plate Beveller
- portable bevel machine - model TKFB100 - tested & working

139
Flex Dispenser
- LM-100v, Lucas Milhaupt Inc. - untested

140
Saw Blades & Abrasive Wheels
- Royce 14" blade, 1" arbor - 14", 180 T, 1 1/2" arbor - Gladu 15", 1" arbor - 15", 1" arbor - blades appear new or freshly sharpened - abrasive wheels, 8 in total - 12" to 16" - steel & stainless steel

141
Grade 5 Bolts & Others
- 7/16", 1/2" & 5/8" - 2" to 2 1/2" length - full & partial boxes - 6 boxes in total

142
Lincoln Electric Spool Gun & Controller
- Magnum SG - spool gun & control module - module controls gas flow & wire speed - with regulator & lines as shown

143
Vice Grips & Others
- new in package Irwin vice grips, 2 IISP - pneumatic drill, Ingersoll Rand, model 7802A - Unitool RV rust proofing gun with cup

144
Tools, Soldering Flux Plus
- Wolverine paste soldering flux, four 1 lb. cans - 2 pairs aviation snips - rivet gun - & so much more

145
MIG Welding Guns
- gun & cable assemblies - used, status unknown, some may not be complete - at least 6 in total - leather gloves, leather welding hood with lens

146
Supply Closet
- metal shelving unit, 36" x 18" x 76" - 4' & 8' fluorescent tubes, status unknown - paper towels & toilet paper - rubber gloves - Rubbermaid industrial mop bucket - Fast Orange pictured has been used

147
Welding Positioner
- 1/2 hp Leeson, wired 110 - no tilt, rotation only - with foot controls - footprint 24" x 30 1/2" - controller only works on high & turn slowly

148
Starley Roto Star I
- welding positioner - with controller & foot pedal - 110v, tilt & turn - does not includes vice grips pictured

149
Welding Positioner
- tilt & rotate - with foot controller - 110v - footprint 39 1/2" x 31" - tested & working

150
Starley Roto Star I
- with controller & foot pedal - working - 100v - tilt & turn - clamp NOT included

151
Starley Roto Star I
- welding positioner - tilt & rotate - with foot controller - working - 110v - clamp included

152
Emco Welding Positioner
- working - with foot controller - 8" chuck - 110v - rotation only, no tilt

153
Adjustable Roller Bed
- Irco - model XHGK-10 - motor power 2 x 0.55 kw - loading 10,000 kg - footprint 120" x 44" - 600v, 3 phase - in working order

154
Adjustable Roller Bed
- 120" x 28" - 120v - in working order - 14"w roller

155
Adjustable Roller Bed
- 120v - status unknown - roller width 13" - approx. 120" x 27"

156
Electromagnetic Drill Press
- Milwaukee - in working order - 120v, 400 rpm, 3/4" capacity

157
Electromagnetic Drill Press
- Fein - model DSK-658-5 - 11v, 230/550 rpm - in working order - looseness in guides

158
Welder Cooler
- liquid cooled - 26" x 12" x 17 1/2" including aluminum mounting stand - working

159
Torch & Power-Weld Reel
- cutting torches with hose, reel, tank crib & 2 regulators - reel mounted to tank crib, Power-Weld, has automatic recoil - more than 40' of hose - crib 25" x 16" x 71" to top of reel - tank NOT included

160
Georg Fischer Pipe Cutter
- pipe cutter & chamfering machine - bench mounting - 120v - tested & working - includes 2 new blades

161
Bug-O Burner
- gantry system - Track Torch for straight line cutting - includes 2 sections of track, total of 12

162
Banding Machine
- metal banding machine on dolly - will accommodate up to 1" diam. band - includes partial spool 1/2" banding - includes assortment of metal clips, tightener tool & cutters

163
Electrode Stabilizing Oven/Flux Holding Oven
- Gullco - model 350 - single phase - 100 - 500ºF - 22" x 27 3/4" x 21 3/4" - contents of oven included

164
Ridgid Pipe Threader
- model 300 power drive - includes stand - foot control - 115v - in working order

165
Steel Work Table
- extra heavy duty - 5' x 10' x 33" - 2" plate steel top - items on table NOT included

166
Steel Work Table
- heavy duty - approx. 4' x 8' x 33" - 1/2" plate steel top - table only, other items pictured NOT included

167
Steel Work Table
- extra heavy duty - 62" x 97" x 35" - 1 1/2" plate steel top - with swing out platform 12" x 8" - items on top NOT included

168
Steel Work Table
- heavy duty - 5' x 10' x 32" - 1 1/4" plate steel top - 4 row of 3/4" holes on 4" centres - table only, other items NOT included

169
Steel Work Table
- heavy duty - 5' x 10' x 32 1/4" - 6 legs, 1 1/4" plate steel top - items on table NOT included

170
Steel Work Table
- 48" x 96" x 33" - 1/2" plate steel top - items on table NOT included

171
Steel Work TAble
- 47" x 94 1/2" x 34" - 3/4" plate steel top - items on table NOT included

172
Boardroom Table
- 96" x 42 1/2" tapering to 33" x 30" - big enough for the family dinner - some scuffing of surface

173
Boardroom Chairs
- 4 chairs, 3 pictured - 26" x 27" x 40" - be comfortable while making the big decisions or inputting for auctions

174
Canon Image Runner 323551
- purchased as a refurbished unit last year - good working order - will accommodate up to 12" x 18" paper - comes with an extra box of toner - fax, photocopy, scan, networked

175
Executive & Boardroom Chairs
- 2 styles - 1 executive chair, high back & solid wood arm rests, upholstered seat back with wood accents, 26" x 26" x 4" - 3 boardroom chairs, adjustable seat height, tilt arms, 25 1/2" x 25"

176
Oasis Watercooler
- top load - 13 1/2" diam. x 38 1/2"t (excluding bottle)

177
Eureka Upright
- 12 amp vacuum - bagless upright with Air Speed Technology - with hepa filter - removable canister, floor height adjustment - model AS1000 - tested & working

178
Bar Fridge & Microwave
- Woods, tested & working, 21 3/4" x 23 1/4" x 32 3/4" - Proctor Silex microwave with turntable, tested & working, 18" x 13" x 11", model E701NP-F

179
Welding & Fabrication Reference
- 38 volumes - see photos for subjects covered

180
Pressure Gauges
- 20 units - from 400 to 10,000 psi - no longer functional for calibration purposes

181
Flanges
- 4 copper combination flanges, 3", new - 2 stainless steel flanges, see photos for specs

182
Valves & Clamps
- NVC ball valves for 3/4" pipe to 316 mm - 2 sweat & 2 threaded - 4 heavy duty 2 1/2" clamps

183
Mainly Stainless Steel Hardware
- couplers - half couplers - inserts - end caps - assorted fittings

184
Hardware Assortment
- mix of copper, stainless & carbon steel - elbows - reducers - washers, nuts - flanges - & more

185
Testing Equipment
- vintage pieces - Alnor Pyron in case - & others

186
Fridge & Microwave
- Moffat refrigerator/freezer 30 1/2" x 29" x 65"h - Danby microwave 17 1/2" x 12 1/2" x 9 1/2" - both in working order - fridge contents NOT included

187
Small Appliances for the Lunchroom
- Black & Decker coffee maker - Proctor Silex 4 slice toaster - Hamilton Beach toaster oven - small electric kettle

188
Lunch Room Needs
- table & chairs - folding poly table, approx. 30" x 60" x 29" - includes 5 folding chairs and 3 stackable

189
Stainless Fittings
- 1/2" & 1 1/2" 90º short weld ends - male weld connectors 1/2" & 3/4" - tees & more

190
Assorted Fittings
- stainless connectors, 1/2" thread - stainless inserts 3/4" thread - steel & aluminum caps

191
Primarily Taps
- assorted sizes of taps, most appear unused - 1 reamer, 1" size - rethread die 1 1/8 - 12 rethread die

192
Gray Tools Torque Wrench
- micrometer adjustable - # 72100 - 3/8" drive, with case

193
Square & Punched
- machinist's steel square set, missing flat ruler - steel stamp letters set, 1/8", complete

194
Roller Pins & Punches
- 1/4" number set - roller pin assortment

195
From the Toolbox
- drives, utility knife, tape, caulking gun - useful assortment

196
Welder's Assortment
- approx. 6L Powerweld coolant fluid, strikers - flashback arrestor, safety plates (12), nozzle tips - tip dip, flints, boot covers & more - some new, some with experience

197
Primarily Tips
- adapter tips, gas lenses - contact tips - assorted sizes, lots of pieces

198
For the Welding Shop
- holder & wire guides - electrode holder - other assorted parts as pictured

199
Soapstone Markers
- approx. 96 sticks - almost full box of #1 round - complete with a pencil holder

200
Cut Off Wheels
- approx. 40 count - 7" x 1/8" x 7/8" - classic steel/cast

201
Aluminum Grinding Wheels
- approx. 30 count - 7" x 1/4" x 7/8" - ALU 24

202
Allsteel Grinding Wheels # 1
- 23 count 7" x 1/4" x 7/8" Walter Allsteel - 4 count 9" x 1/8" x 7/8" Walter A-30 combo

203
Allsteel Grinding Wheels # 2
- 45 count 4 1/2" x 1/4" x 7/8" Walter Allsteel

204
Grind Safely
- 5 new face shield visors - 22 count 4 1/2" x 1/8" x 7/8" Walter A-30 combo - 7 count 4 1/2" x 3 /64" x 7/8" Walter zipcut - 2 x 6" wire wheels - other abrasives

205
Abrasives Plus
- approx. 35 count 7" x 7/8" resin fiber discs, 24 grit - assorted grinding & polishing wheels - 4 count 1 3/8" hole saws, new - 2 cans grey enamel

206
Shop Supplies Plus
- 5 bottles solder paste - vise grips 12L6, wire brushes, drills bits & more

207
Regulators & Torch
- argon-nitrogen/helium regulator - Lincoln argon regulator/flow meter - Turbo Torch nitrogen regulator - Victor regulator - torch - all believed to be reconditioned units

208
Regulators
- 3 units in bags believed to be rebuilt - others as pictured

209
Gauges & Nozzles Plus
- 5 new PT-32 torch nozzles - new torch handle - new Winter's Process Gauge 4 1/2" dial - 4 used gauges - assorted nozzles with experience

210
Specialty Electrodes
- approx. 5 lb. Weld Mold No. 966 3/32" - 10 lb. McKay 2209 AC-DC, 1/8" - 10 lb. 317L/SNR - 10 lb. low carbon UTR 6809 No - 7 full or partial packs of tungsten electrodes

211
Socket Sets
- Gray 3/8" to 13/16" with ratchet & spare pieces - Craftsman 3/8" to 3/4", appears complete

212
Welding Assortment
- 2 pkg. (18 sticks) Thermanit JEW 308L-17 - collets, contact tips, gas lens caps - 2 x 15' liner conduit - gas lens bodies, caps, MIG parts & more

213
Welding Supplies
- repair & maintenance - name brand parts - Lincoln Electric, American Torch Tip, Parweld, Tweco Professional - brass nozzles, contact tips, centrefire nozzle cones, copper gas cups, torch head - & more

214
Tools Plus
- Walter wire cup brush, new in box, 3 x 5/8"-11 - Blueshield 300A ground clamp - impact sockets, 1/2" drive - Walter wire wheel brusk, new in box, 4 1/2" x 3/8" x 5/8"-11 - Grip On welding clamps - Blueshield Master gauge, fillet weld gauge, new in ...

215
Caliper & Die Grinder
- new in package - Wespro pneumatic die grinder, DG25H - Insize Digital Caliper

216
Die Grinder & Ratchet Wrench
- new in package - Ingersoll Rand 1/2" drive ratchet wrench, model 1077XPA - Parts Master die grinder, #800-0-0140

217
Hardware & Fittings
- 2 boxes full - brass, aluminum, stainless, carbon steel - useful assortment

218
Regulators, Ball Valves & More
- 2 Medalist regulators - 2 Pinacle ball valves 1-316 - & more - see photos for all that is included in lot

219
Gloves & Goggles
- approx. 14 pair new leather gloves - 2 pair experienced gloves - 4 pair new goggles

220
Gloves, Caps & More
- welders' needs - leather welding gloves, 6 pairs, new - welding caps, approx. 40 - toques & ball caps

221
Gaskets Plus
- 4" & 6" red rubber - bearing & oil seals - & more - see photos for details & specs

222
Grip Tight Test Plugs
- high pressure test plugs - GT4P80 - 2, new - 3.80 to 3.91

223
Grip Tight Pressure Testing Plugs
- model GT4P120 - 2 new in package - 3.60 - 3.74

224
Lincoln Electric Parts
- repair & maintenance - nozzles, nozzle insulators, cable lugs, contact tips - & more

225
Fittings Plus
- brass & copper - unions, washers & more

226
Tool Bag & Tools
- Jobmate soft bag tool bag, 15", wide mouth opening - telescoping gauges, sockets (metric & SAE), screwdrivers, wrenches

227
Toolbox & Tools
- 19" Stackon poly toolbox - includes all tools show in photos - driver bits, hex key, hammer, circuit tester & more

228
Toolbox & Contents
- 26" x 10" x 12" with interior lift out tray - Walter mini grinder - aviation snips - 10" locking pliers - & more

229
Vice Grips Plus
- two 11R - one 11SP - 2 Kanttwist clamps

230
Vice Grip Power
- 4 pcs. - three 11R - one 20R

231
Hardware & Tools
- from the tool chest drawer - 4 flashbacks arrestors, 2 oxygen, lacetylene, 1 propane - cutting torch 141C - pins, cable ties, assorted small hardware & much more

232
Drill Bits, Key Stock & More
- assortment of drill bits, experienced - Key stock, 2" to 9" lengths, 1/4" to 1/2" - & much more

233
File & Bind
- load binder strap & ratchet - 9 pc. file/rasp set - grinding wheels & wire wheels

234
Plano Small Parts Sorters
- 2 boxes, 14" x 9" x 2" - tips, connectors, clamps, bulb, assorted fittings, links, springs

235
Cutting Torches Plus
- 2 torch heads - taps - strikers - tip cleaners - & more

236
Barnes Submersible Pump
- appears as new - model SP33Vf - .2 hp / .33 - single phase 120v - 1/2 max hp - 1 1/2 discharge - includes garden hose - tested & working

237
Get Henry To Do It
- pneumatic International NRV200-22 dry vac - good working order - comes with a Shark upright, beater bar non-functional, unit runs

238
The Old Park Bench
- cast iron ends & back insert - one leg has been welded - some rebuilding necessary

239
Beach Toolbox & Contents
- 20" metal toolbox - with lift out tray - chipping hammers - hacksaw - file - & more

240
Tool Chest & Contents
- wooden tool chest, 32 1/2" x 12 1/2" x 12", with hasps for locking - contents include levels, ruler, hammers, clamps, screwdrivers & much more

241
Locking Wrenches
- 3 vise grip 11R - vise grip 10CR - vise grip 10WR - all grip locking clamp, with extra jaws not pictured

242
Milwaukee M-Spector 360
- rotating inspection scope (9mm) - with battery & charger - 2.7" LCD display, 3' cable - unit has seen minimal use, as new

243
Tool Assortment
- hex keys, metric & SAE - punches, chisels, knives & more

244
Sockets & Drives
- primarily 3/8" drive - regular, deep, impact - mix of metric & SAE - 1/2" to 3/4" adapter, knuckle & more - 6 ratchets, extensions & more

245
Wrenches & Hardware
- assorted wrenches & pliers - tool wrenches - stop watch, gauge, pipe cutters - Kant Twist clamp & more

246
Air Tools
- 3 Matrix die grinders - Westpro die grinder with extension - 1R air drill - air nozzle

247
More Air Tools
- CH 3/8" drive air ratchet - CH 1/2" drive impact wrench - CH air chisel - grinders & more

248
Sets
- hole saws, 1" to 4" with mandrel - power screwdriver & nut driver set - Unitool SAE hex set - Mastercraft wrenches 8mm to 22mm

249
Snap On & Adjustables
- 12", 10" & 8" adjustable wrenches - Snap-On wrenches 13/16" to 3/8", 7 pc.

250
Wrench Sets
- Craftsman 1 1/4" to 7/16", 14 pc. - Challenger by Proto 1" to 3/8", 11 pc.

251
Wrenches, Abrasives, Clamps
- 3 JayBe clamps - SAE & metric wrench assortment - grinding & cutting discs - wire brush, sandpaper & more

252
Tools in a Box Lot
- tapes, rulers, solder gun, hacksaw - auger bolts, assorted hardware & much more

253
Screwdrivers
- dozens & dozens - a useful assortment

254
Welding Assortment
- Easy Flo 45 wire - other electrodes - handy flux - new electrode holder & much more

255
Pounding Collection
- hammers - ball peen, framing, chipping - approx. 10

256
Work Safely
- eye protection - hearing protection - gloves - knee pads - respirator/masks - & a light for visual aid

257
Abrasives
- 14" cut off wheels, 4 pcs. - flap wheels - sanding drums - wire brushes - & more

258
Curv-O-Mark
- Jumbo Contour Market - compact & time saving - appears as new - for pipe layout and structural steel joints

259
Weldshop Assortment
- 2 pair locking chain pliers - new drill chuck model JT4, 1/16" to 3/4" - Drill Doctor - electrode holders - poly filter plates

260
Assortment For the Cupboard
- spare parts new & used - from machine screws to contact tips - CO2/argon regulator - brass, copper & more

261
Foot Pedal & Lines
- mix of new & used - status of all untested

262
Extension Cords & Trouble Light
- 3 heavy duty extension cords - note: one cord has 2 male ends - trouble light

263
Organizers
- 2 door cabinet with bins 23" x 10 1/2" x 58 1/2" including base, 48 bin drawers, lockable complete with key - 2 small plastic organizers, each 12" x 6" x 20"

264
Two Aluminum Tables
- 28 1/2" x 16" x 30 1/2", open front at bottom - 28 1/2" x 16 1/2" x 31", closed at front at bottom - custom welded construction

265
Folding Tables
- 72" x 30" x 29", damage to one corner - 60" x 29 1/2" x 29", good condition

266
Office Essentials
- 2 vintage metal desk & 1 watercooler - Steel Case double pedestal metal desks, 60" x 30" x 28 3/4" - Quantum watercooler, top load, 35 1/2"t excluding bottle

267
Mechanics Tool Chest
- Gray Tools - storage & work area - 5" hard rubber casters, 2 fixed & 2 swivel - graduated drawers, 9 in total - key missing, locking mechanism deactivated - top drawer not latching due to small bend - 42" x 19" x 40" (excluding handles)

268
Mechanics Tool Chest # 2
- 2 pc. Gray Tools set - lower unit 27" x 18" x 40" excluding handle - upper unit 26" x 16" x 19" - 5" casters, 2 fixed, 2 swivel - lid on upper box has had significant bend - no keys for unit, lower lock mechanism disabled

269
Autotransformer & Reduction Box
- Staco variable autotransformer - Baldor 58:1 reduction box - both untested

270
Toyoto Forklift
- 2 stage mast - propane powered - solid rubber tires - as found, currently not running **No propane cylinders included, purchaser must provide**

271
Magnetic Lifter
- Eclipse Magnetico - UltraLift - 60 lb. weight - model UL0500 + (UL1100+) - 1100 lb. capacity

272
Plywood & Chipboard
- full sheets - 7 sheets of each - primarily 9/16" thickness - 4' x 8' sheets

273
Linde Welder
- model DCL300 - 3 phase - DC-ARC welder - status unknown, plug has been cut off cord

274
Metal Bender
- 3 phase - 575 amp - 1 hp - with 3 extra roller, as pictured - footprint 32" x 35"

275
Ingersoll-Rand Air Compressor
- T30, model 242-5D - 575v, 3 phase - 5 hp Elektrim motor - unit was in good working order when taken out of service and replaced by a larger unit

276
Bewo Metal Chop Saw
- with vise, vise has 12" jaws, opens approx. 5" - type 315 LT circular saw - 2 speed, for stainless & mild steel - 18.5 & 37m/min - equipped with unique self-centering jaw system, clamping on both side of saw - fan coweling has been removed - status...

277
Lincoln Welder
- stick/TIG - square wave TIG 175 - 475/575 v - believed to be in working order - includes both wands, ground cable & carts

278
Memco Welder
- AC/DC 250 HF - with Miller Coolmate 4, believed to be non-functional - welder believed to be functional - includes foot control

279
Lincoln Sub Arc Machine
- Idealarc DC600 - with Lincoln Squirt Welder LN-8, wire feeder - flux tank - see photos for more details - status unknown

280
Wisconsin Air Cooled Motor
- 4 cylinder - with attached clutch - has not run recently but not seized - sitting on but not mounted to heavy steel grate, 36" diam. x 2 1/2" depth (not solid)

281
Crate Lot
- whips & cables - status unknown - mainly TIG & MIG - 36" x 36" x 28"

282
Crate Lot
- hardware & more - Gas Booster, model GBD-5 - stainless steel flanges - U bolts - fittings, bolts, lock nuts - flex tube - stainless steel tubing - & more

283
Skid Lot
- MPI fitting - solenoid valves - coil stainless flex - winters gauges, 60 psi, liquid filled - fan - & more

284
Box Lot # 1
- stainless steel fittings - inserts, reducers - hose couplers - couplers - 100 plus pounds

285
Box Lot # 2
- Swagelok fittings & others - brass & stainless - 100 plus pounds

286
Box Lot # 3
- fittings plus - mainly brass - Swagelok, top ring, cush-a-clamp, Spaenaur - Fisher Control 95L, 17057098

287
Box Lot # 4
- fittings & more - many new Swagelok fittings - see photos for details

288
Welding Screens
- AGO Industries - 2 screens with frames - 8' & 6 1/2', approx. 7't - both are experienced

289
Welding Screens # 2
- 2 screen with frames - approx. 4' & 6' lengths, approx. 6't - both are experienced

290
Welding Screens # 3
- 2 screen with frames - approx. 8 1/2' & 4 1/2'l, 6' & 6 1/2't - both are experienced

291
Welding Screens # 4
- portable screen - roller blind style, retractable - 6'w

292
Aluminum Tubing
- square, rectangular & round - includes some flat bar - rectangular 3" x 2" , two 20', one 15', approx. 1/8" - round 1 5/8" diam. 15' & 8'l, 2" diam. 8'l, 1" diam. 10' & 8'l, 1/2" diam. approx. 10', 2 1/2" diam. two 8'l, 3" diam. 6'l - square 3" x 3...

293
Aluminum Bar
- flat bar - 5" x 1/2" one 5 1/2' - 2" x 1/2" approx. 130 linear ft. - 1 1/2" x 1/2" approx. 120 linear ft. - 2" x 3/8" approx. 130 linear ft. - 3" x 3/8" approx. 40 linear ft. - 6" x 3/8" approx. 15 linear ft. - 5" x 3/8" approx. 5 linear ft. - 6" x...

294
Aluminum Angle Iron
- 2" x 2" x 1/4" approx. 80 linear ft. - 2 1/2" x 2 1/2" x 3/8" approx. 44 linear ft. - 2 1/2" x 2 1/2" x 1/4" approx. 103 linear ft. - 2" x 2 1/2" x 1/4" approx. 10 linear ft. - 2" x 3" x 1/4" approx. 13 linear ft. - 2 1/2" x 2 1/2" x 3/16" approx. ...

295
Aluminum Angle Iron # 2
- 3 x 4" x 1/4" approx. 29 linear ft. - 3" x 3" x 3/8" approx. 162 linear ft. - 3" x 4" x 3/8" approx. 18 linear ft. - 2" x 3" x 1/4" approx. 66 linear ft. - 3 1/2" x 5" x 3/8" approx. 5 1/2 linear ft. - 2 1/2" x 3" x 1/4" approx. 6 1/2" linear ft. -...

296
Aluminum Supplies
- flat bar, square tubing, angle channel, I beam - flat bar 5" x 3/8" approx. 24 1/2 linear ft., 6" x 1/2" approx. 29 1/2 linear ft., 8" x 1/4" approx. 13 linear ft., 2" x 1/2" approx. 20 linear ft. - tubing 2 1/2" x 2 1/2"x 1/8" approx. 11 linear ft...

297
Aluminum Supplies # 2
- channel, I beam, angle, flat bar - flat bar 4" x 1/2" approx. 20 linear ft. - I beam 3/12" x 6" x 3/8" approx. 10 linear ft. - channel 3 1/2" x 6" x 1/2" approx. 9 linear ft. - angle 4" x 6" x 3/8" approx. 26 linear ft., 3" x 4" x 3/8" approx. 202 ...

298
Aluminum Channel
- 4" x 12" x 1/2" - approx. 20 linear ft.

299
Contents of Shelves
- 4 shelves of useful items - BX cable, heavy welding cable, assorted connectors - metal toolbox - plugs, fuses, electric motor

300
Contents of Shelves # 2
- BX & heavy cable, some connectors - shut-off boxes - transformer

301
Chemicals & Paint
- 2 shelves - full & part containers - epoxy paint, industrial solvent, alkyd primer - heat & rust resistant paints - spray gun & pressure gauge

302
Galvanized Conduit
- 5 - 10' lengths of 1" conduit - threaded ends with couplers - one 7', 5/8" OD conduit

303
Shop Supplies
- box of gasket material, approx. 1/2" rope style plus 40' flat roll, 2 1/2"w - 2 boxes banding clips, 1/2"w, 4000 to 5000 clips - quantity of 2" nails - almost full reel of 16g, 2 conductor shielded cable

304
Work & Play
- Wedco 5 gallon fuel container - two 5 gallon marine tanks, 1 with hose, 1 without - Mastercraft lawn spreader, model CT100B - approx. 1 dozen dolly wheels

305
Louisville Fiberglass Ladder
- 8' step style - heavy grade 1 industrial - legs look good

306
Gaskets
- quantity of primarily rubber type gaskets - assorted sizes

307
Stainless Hose Clamps
- gear type hose clamps - approx. 145 stainless 9/16" to 1 1/4" - approx. 240 stainless 11/16" to 1 1/2"

308
Bin & Contents
- metal mesh bin, approx. 36" x 36" x 38" - pull plugs, 1 1/8" diam. x 3/4"l - 8 Cusha-Clamps, 1" - 2" cap plugs - quantity of gaskets

309
Toolbox & Contents
- chipping hammer - selection of sockets, mostly Craftsman - 21" cantilever toolbox

310
Pipe Roller & Beam Trolley
- incomplete Sumo 2 ton beam trolley - adjustable height pipe roller

311
Trolley & Contents
- 16 bins - assortment of stainless & carbon steel fittings - NSF rack 36" x 14" x 55 1/2"

312
Steel Workbench & Contents
- bench 72" x 22" x 58 1/2", 2 legged, **purchaser to unfasten from wall** - 1/2" nuts, washers, bolts, assorted sizes - strap ratchets - bags of pipe caps - 3" bench vice

313
Extension Ladder
- 24' - legs are good - slight bend in rail at top - grade 3

314
Ridgid Tri Stand
- no. 460 Ridgid tri stand - 1/8" to 6"

315
Hose & Pump
- hydro test pump needs a rebuild - 1/4" diam. flex hose on reel - pressure washer ward & hose - assorted garden hose

316
Whirlpool Washer
- unit untested - commercial quality super capacity - porcelain basket

317
It's the King
- King Canada 14" cut-off saw - 15 amp, 3750 rpm

318
Sumo Two Ton Chain Hoist
- serial 950119 - model SH20


320
Break Time
- time clock operated signal bell - work lamp

321
Chain Sling
- two 13' lengths of 1/2" chain with hooks

322
Heavy Duty Appliance Cart
- missing roller belt

322
Cermaic Fiber
- 8 boxes - Cerablanket - 1" 7 2" thick - 2" x 150' length - 1" x 300' length - mix of the two sizes

323
Hobart Wire Feeder
- new in box - Hobart model 2210 wire feeder - with gauge & hose as pictured - semi-automatic solid-state control wire feeder - includes mounting basket

324
Pipe Cutter
- Aireo Minigraph pipe cutter - 3 size of pipe bevelling machine co. saddles, approx. 9", 14" & 22"

325
Torches For the Welder
- burner torches - cutting torch - heating torch - as pictured

326
Lincoln Electric Wire Feeder
- model LN-25 - includes welding gun - unit untested

327
No. 10 Radiograph by Airco
- torch cutting, track - untested

328
Water Cooler & Friends
- stainless steel tank, 16 1/2" x 11" x 21 1/2" - 2 winches - mounting bracket - pump untested, plug cut off cord

329
A Lot Storage
- approx. 100 bins of assorted sizes & colours - as pictured

330
Pipe Wrenches
- 18" aluminum Snap-On - Ridgid approx. 14", note missing end

331
More Pipe Wrenches
- Jet 18" & 24" - heavy duty AL, 36", broken end

332
Vice Grip Locking Clamps
- 6 pair - clamps have been customized as pictured

333
Vise Grip Locking Clamps II
- 6 pairs - 3 pairs missing springs

334
Vise Grip Locking Clamps III
- 6 pairs - 3 pairs missing springs

335
Vise Grip Locking Clamps IV
- 5 pair, 1 missing spring - 4 punch set, 1/2" & three 5/8"

336
Bar & Sockets
- 3/4" drive Gray bar - 2 1/16", 2", 1 13/16", 1 1/16", 1 5/8" Gray sockets - 1 1/2" socket

337
Large Wrenches
- Gray two 1 1/2", 15/16" - 1 5/8", 1 7/16" - 5 pc. in total

338
Impact Tool
- 1/2" drive Ingersoll Rand impact tool - 23 primarily impact sockets 7/16" to 1 1/2"

339
Charger & Drive
- Terminator intelligent battery charger - 4, 12 & 24 amp multi-stage - complete set Gray Tools screwdrivers

340
Tube Benders
- 2 units - Imperial Eastman 3/4" OD, 3R - Imperial Eastman 5/8" OD, 2 1/4" R, small chip

341
Tube Benders
- Ridgid 1/4" OD, 5/8" radius - Super EGO-Spain 1/4" OD, 3/4" radius - Super EGO-Spain 3/8" OD, 1 1/8" radius - Super EGO-Spain, 1/2" OD, 1 11/16" radius

342
Sockets & Ratchets
- primarily 3/8" drive - approx. 50 sockets, assorted brands - 1/2" Gray sockets & Mastercraft 3/8"

343
Toolbox & Contents
- steel box 8 1/2' x 20" x 20" - pipe clamp ends - eye bolts - nozzle tips

344
C Clamps
- three 6" - one 5" - two 7"

345
Combination Wrenches
- variety of brands, 14 in all - five 7/8" - three 15/16" - two 1" - two 1 1/16" - one 1 1/8" - one 1 1/4"

346
More Wrenches
- 7 metric, 7mm to 14mm - 9 combination wrenches, 5/16" to 3/4" - two 3/4" multi-great ratcheting combination wrenches - 3 box end wrenches

347
Drill Bits & More
- 5 containers of drill bits - 15" adjustable wrench - level, screwdrivers, allen keys, snips

348
Angle Grinders
- Walter with wire cup - Metabo - both tested & working

349
More Angle Grinders
- Metabo, model W23-180, 15 amp - Hitachi 7" disc grinder - both tested & working

350
Another Pair of Angle Grinders
- both by Metabo - tested & working

351
Yet Another Pair of Angle Grinders
- Walter Super 5, 30 A 150 - Walter 8 amp - both tested & working

352
Keep On Grinding
- Walter Super 5 30A 150 - Metabo - both tested & working

353
The Last Grinder & Pals
- Metabo grinder - Craftsman saber saw - Walter drill, missing chuck - all tested & working

354
Spring Clamps
- 7 large & 4 medium spring clamps - 1 Bessey quick release F clamp

355
Bessey Clamps
- 4 Bessy ratchet clamps - two 8" - one 10" - one 12"

356
Hammer It
- 10 hammes - mallets, ball peen, claw hammers - includes brass headed hammer

357
Sledge Hammers
- fiberglass handles - 2 hammers, 8 lbs. - experienced but in good condition

358
Smooth & Level
- 4' level, missing one lens - two 2' levels, all lenses intact - 4 files - pry bars - magnetic pick up - & more

359
Bessey & Good Hands Plus
- clamps for the job - 6" Bessey C clamp, heavy duty - Good Hand and Good Hand-like clamp

360
Fein Angle Grinder
- 7" - tested & working

361
Welding Supplies
- inert gas regulator, Victor - whips - torch head - see photos

362
Ridgid Pipe Stands
- 2 - model VJ99 - 28" - 53" adjustment - 12" capacity

363
Ridgid Pipestands
- 2 - model VJ99 - 28" - 53" adjustment - 12" capacity

364
Work/Support Stands
- tripod base - 2 heads for each, pipe stand & flat stand - adjustable height

365
Roller & Pipe Stands
- 3 tripod bases - 3 roller heads - 2 pipe stand heads - adjustable heights

366
Lincoln Electric LN7
- wire feeder - status unknown

367
Miller S-22A
- constant speed wire feeder - status unknown - with Lincoln Electric CO2 regulator

368
Gauges & Fittings
- Winters gauges, 4 1/2" dial 1/2" NPT, both new in box - fittings, new & experienced, 90º, couplers & more, brass & stainless

369
Toolboxes & Contents
- metal fabricated tote 16"l - Rubbermaid toolbox with tray 20"l, missing one latch - includes hex keys, screwdrivers, pliers, hacksaw, ball peen hammer, handheld propane torch

370
Projects To Finish
- and the paint to finish it with - 4 wrought iron table legs - 2 pc. of decorative iron work - includes partial containers paint & other fluid - Torcan mini heater also included

371
Bench Grinder & Stand
- King 8" bench grinder, tested & working - welded angle iron & plate stand 24 1/2" x 12 1/2" x 32", bottom shelf for storage of supplies

372
Bottle Jack Plus
- heavy duty hydraulic jack, tested & working, missing handle - 18" Jet, crescent-type wrench - & more

373
Name Plates
- carbon steel plates, 3 1/2" x 5" x 1" - drilled for ready attachment - approx. 50 - 75 in crate

374
Air Hose & Tools
- Sioux 1/2" impact wrench, model 5000 - Ingersoll Rand ratchet wrench, model 1077XP - both untested - includes hose & blower gun

375
Welding Rods
- partial containers - 85AB OK TIG rod 316L, approx. 8 lbs. - Alcote aluminum rod, approx. 1/2 lb. - Execor, Stellite 3/32", approx. 5 lbs. - Inco Weld 1/16" ER 309L, approx. 8 lbs. - Blueshield Crystal 4043 3/32", aluminum rod - ESAB, Spoolarc 65, 1...

376
Storage Options
- for paperwork & supplies - lateral 4 drawer letter sizes 36" x 19" x 53 1/2" - 2 door metal cabinet 36" x 18" x 65", 5 adjustable shelves - includes contents Argweld inflatable pipe purging systems, 3" to 6" sizes

377
Ridgid Pipe Threader Plus
- 3 way - 1/2" , 3/4" & 1" - model 31-A - 8 Ridgid universal chasers, 4 new in package, 4 experienced, do not fit 31-A

378
Slings & Straps
- various lengths & widths - see photos

379
Cable Slings & Rollers
- 10 wire cable slings, 3/8" & 1/2" woven cable - 2" rollers ten 48 1/2"l, one 27 1/2"l

380
Abrasives
- cut off wheels - sanding wheels - wire cup - flap wheel & more - mostly for 7/8" arbour

381
Power & Light To the Work Site
- extension cords - trouble light - light, medium & heavy duty

382
Protective Clothing & Supplies
- leather welding coats, L & XL - leather gloves - welding helmets, experienced - face shields - bump cap - knee pads - eye protection

383
MIG Welding Spools
- 6 spools, full & 5 partial - various alloys - see photos for details

384
Welding Rods
- partial containers - copper clad cutting electrodes - Unitec C-32, cast 3.25mm - Blueshield 316L 1.6mm - Bonarc - see photos for complete details

385
Portable Pipe Cutting Machine
- Auto-Picle-S - oxyfuel pipe cutter - bevel or straight cut - unit untested

386
Torch Head, Cables & Tips
- Wika gauges - torch head & cables - Tweco contact tips - Tweco nozzles - includes leather welding sleeves

387
Ground Cables
- 3 cables

388
Makita Die Grinder
- tested & working - includes wheels & grinding stones - partial kit, appears to have had limited use

389
Hydrostatic Test Station
- Hydraulic Technology Inc. - # 9901-100 - max inlet psi 90 - outlet psi 10000 - includes Rubbermaid cart - in working order

390
Steel Work Support
- 72"l, 8" x 3" channel - frame 6" x 6" tubing - 32"t - 2 in total

391
Steel Work Supports
- 84"l, 8" x 3" channel - frame 6" x 6" tubing - 32"t - 2 in total

392
Work Station & Stools
- 36 1/2" diam. x 28 1/2"t - 2 metal stools included

393
Slings & Chokers
- approx. 20 - various degrees of experience

394
Fittings & Hardware Plus
- clevises & other fasteners - fittings - bins & tote

395
Work Supports
- 5 supports - two 21" with 4" casters - two 32" with 5" casters - one 49" with 6" casters

396
Pneumatic Tools & Hose
- chisel - Ingersoll Rand impact wrench, 1/2" drive - air wand - untested - air hoses with fittings

397
Power & Light
- trouble lights & extension cords - includes retractable wheel with cord

398
Barrel on Stand
- very small amount of cutting oil left in barrel - 45 gallon barrel - rolling stand

399
HSS Taper Shank Twist Drill
- 6 drill bits - 14" to 17 1/2" lengths - one of each of the following sizes: 2 3/16', 2", 1 25/32", 1 41/64", 1 17/32", 1 1/2"

400
HSS Taper Shank Twist Drills
- 1 1/4" to 33/64"' - 21 in total

401
Reamers & Drill Bits
- HSS round shank drill bits - selection of taps also included - 50 plus pieces

402
Chucks & Hole Saws
- 3 morse taper chucks - selection of hole saws - includes cabinet shown

403
Heavy Duty Pedestal Fan
- Air King by Lasko - 30" blade, adjustable height - working

404
Mach 30 Pedestal Fan
- Marley Industrial Products - heavy duty, in working order - 30" blade, adjustable height


406
Electrode Stabilizer Ovens
- Dry Rod, 300ºF avg. - Gullco, model 10B, single phase, 100-400º - status unknown

407
Ridgid Clean
- professional grade wet dry vacuum - model WD19500 - 2 1/2" OD hose missing, includes wands & brush - 16 gallon, 6.5 peak hp - tested & working

408
Vise Grip Locking Clamps
- 4 pair 11SP - 2 pair are missing springs

409
Vise Grip Locking Clamps
- 5 pair 11SP - 2 pair are missing springs

410
Bessey Locking Clamps
- 3 pair - GRM & GRZ V - all with springs

411
Vise Grips Locking Clamps
- 2 pairs - 18SP & 18R

412
Bessey Clamps
- Classix with heavy duty pad - heavy duty - 5 in total - 12" - one pad missing

413
Bessey Clamps
- Classix style with heavy duty pad - 5 in total - 12"

414
Heavy Duty Clamps
- 5 in total - includes one Bessey 8 1/2" - three 8" C clamps - one 10" C clamp

415
Bessey Clamps
- 5 in total - ratchet style - 9 1/2" to 12 1/2"

416
Heavy Duty Clamps
- includes 2 Bessey, ratchet style, 20" - includes 2 Bessey Classix, 14" & 20" - includes one bar style clamp - 5 in total

417
Bessey Clamp
- 4 Classix style - 20 1/2"

418
Bessey Clamps
- 2 F clamps - 1250 x 174 - STB125M

419
Bessey Clamps
- 2 F clamps - STB100

420
Bessey Welding Clamps
- welding angle clamp - WSM 12 plus second smaller - 2 clamps

421
Lever Blocks
- 2 in total - 3/4 ton lever block Kito Corp. Model L4 - smaller is 3/4 tin, larger is unlabelled

422
Transfer Punches
- 57 in total - ranging in size from 7 /64" to 1" - missing 4 from sets

423
Mobile Clamp Rack
- 50" x 28" x 69" - mesh shelf & base - 5" casters, 2 fixed, 2 swivel

424
Rockwell Grinder
- model 7 - wired 550 - three phase - 1/2 hp, 3400 rpm - on stand - tested & working

425
Kant Twist Clamps Plus
- 2 Kant Twist clamps, 6" - one pipe clamp, 79", 1" pipe

426
Heavy Duty Workbench
- 2" plate top - 85 1/2" x 30" x 28" (to top of work surface) with 24" upright right angle jig, 1 1/2" steel with 1 1/4" buttresses - with heavy duty drawer

427
Welder's Assortment
- burner head, new or rebuilt - flashback arresters - lines, clamps, regulator, gloves & more

428
Soothing Sound While You Work
- Pioneer mini stereo with speakers, receiver, dual tape deck, 3 CD changer - Panasonic mini stereo with speakers, receiver, dual tape deck, 5 CD changer - General Electric boom box

429
Heavy Duty Work Stands
- square tube construction - 23" x 22" x 42" - 34" x 24" x 28 1/2"

430
Workshop Needs
- metal cabinet 36" x 28" x 72', adjustable shelves, double door, contents included - handy carts to lend a helping hand: 2 wheeled dolly, torch or tank cart

431
Vises
- bench vise mounted on 1 1/2" x 1 1/2" tube - pipe vise

432
8' Fiberglass Ladder
- Industrial Lite - legs look good, no cracks noted

433
Tiger Torch
- with regulator & hose - tank NOT included

434
Lifting Clamps
- 2 clamps - see photos for design/style

435
Slings & Chokers
- lift straps - various lengths, widths & styles

436
Push Snow With Your Forklift?
- 37" reach - plate 45 1/2" x 21" - 30" centre to centre

437
Clevis & Eye Bolts
- 15 clevis various sizes - 7 eye bolts - as pictured

438
Chains
- both approx. 13'l - 3/8" links & 5/16" links - both with grab hooks

439
Chain Chokers/Slings
- lift your load safely - 3 in total, single & 2 double **To be picked up on the last day of pick up at the end of pick up**

440
Slings & Chokers
- lifting aids - various widths, lengths & styles

441
Liftmaster
- Professional by Chamberlain - garage door opener - appears to be working

442
Vintage Double Pedestal Desk
- metal desk, possibly fireproof - The General Fireproofing Company - included fluorescent light fixture, 48" - 60" x 34" x 30 1/2" **Extremely heavy! Bring help to move**

443
Welding Screens
- AGO Industries - approx. 51" & 70"w x 71"t - third screen 76"w x 81"t

443
Shop Time
- Lincoln Electric clock - quartz movement - 15" diam. - working but piece missing from rim

444
Metal Saw Horses
- 7" channel tops - 48"l x 32"h - guaranteed not to blow over

445
Collectible & Safety Security
- vintage Bailey No. 5 plane - warehouse caution signs - Emergi-Lite, untested - ball mount, end to go in receiver broken - ratchet straps

446
Hytrol 4A
- high ratio gear reducer gearbox - 20:1 ratio - turns

447
Lifting Help
- bottle & car jacks - 2 hydraulic bottle jacks - 8 ton jack works but need oil - larger jack works - includes scissor jack shown

448
Bessey Pair
- GRA 100 clamps - 1000 x 100

449
Bessey Trio
- GRA 30 clamps - 300 x 100

450
Magnum Cooler
- model 10 - with heat exchanger - status unknown

451
Pry, Hold & Level
- bench vise, 4" - load binder - Mastercraft 48" level - pry bar - includes diaphragm pump shown, status unknown

452
Fasteners, Hardware Plus
- nozzles - bolts - assorted fittings & caps - & much more *Bring your boxes to pack*

453
Work & Storage Space
- work bench 68" x 35" x 32" - tubular & angle iron construction - plate top 5/16" thick - welded construction shelving unit 78" x 42" x 73" - items under & on sold separately

454
MIG Welder
- Cobramatic - requires power source - status unknown

455
Redi Racking
- 4 columns approx. 17'h - 18 beams approx. 12'l - approx. 58 cross members

456
Lift & Carry
- Lift-Rite pump cart, fork 7"w x 48"l - dolly/cart with handle, base 26" x 16 1/2" x 6", swivel wheels on one end

457
Fiberglass Step Ladder
- Davidson 6' - adjustable legs - Type II commercial - legs are good, no cracks

458
Crate Lot
- carbon steel - flanges - connectors - caps, tees - elbows - reducers - assorted sizes - lots of weight here - 72" x 28 1/2" x 22 1/2"

459
Crate Lot # 2
- stainless steel - flanges - tees, elbows - connectors - caps - approx. half full - 46 1/2" x 25" x 28"

460
Chimney Liners
- carbon steel - 4 pcs., 1/4" thickness - approx. 59"t x 38 1/4" diam. - tacked at seam

461
Chimney Liners
- carbon steel - 4 pcs., 1/4" thickness - approx. 38 1/4" diam. x 47 1/2"t - 3 of 4 tacked at seam

461
Steel Rings
- 3 rings - 43 1/4" x 36 1/2" x 1/4" - 43" x 36 1/2" x 1/4" - 38 1/2" x 14' x 1/4" - all seams are tacked

462
Chimeny Liners
- carbon steel - 5 pcs., tacked at seams - 4, 1/4" thickness, 28" diam. x 36 1/2"t, 28" diam. x 36 1/2"t, 26 1/4" diam. x 24"t, 20" diam. x 28 1/4"t - 1, 3/8" thickness, 24" diam. x 19 3/4"t

463
Chimney Liners
- 2 pcs. - carbon steel 72"t x 38 1/2" diam. x 1/4" thickness - schedule 40 74"t x 20" diam. x 3/8" thickness

464
Carbon Steel Rings
- perfect fire rings - 3 pcs., 1/4" thickness - all approx. 38 1/2" diam. x 8"t - one of three has tacked seam

465
Welding Rotator/Positioner
- with foot control & speed control - 9" diam. chuck - does not respond to power, status unknown, as found - brand & model unknown

466
I Beam, Carbon Steel
- one 4" x 8" x 10', 1/4" thickness - two 8" x 8" x 13 1/2', 7/16" thickness - four 8" x 8" x 8 1/2', 5/16" thickness - six 6 1/2" x 8" x 9'l, 5/16" thickness

467
Carbon Steel Plate
- 4 sheets, 1/4" x 5' x 10' - 1 pc. 1/4" x 15 1/2" x 64" - 1 pc. 1/4" x 14" x 75" - 1 pc. 1/4" x 56" x 56" - 2 pcs. 3/8" x 64" diam. - 1 pc. 1/4" x 24" x 96" - 1 pc. 1/4" x 8" x 57" - 1 pc. 1/4" x 87" x 39" - 1 pc. 1/4" x 33" x 70" - 1 pc. 3/8" x 25"...

468
Stainless Plate
- 4 sheets - one 1/4" x 42" x 96" - one 1/4" x 48" x 96" - two 1/4" x 52 3/4" x 96" - 2 additional pieces, 1/4" x 31" x 36" & 3/16" x 38" x 29 1/2" - approx. 1600 lbs.

469
Carbon Steel Square Tubing
- 3 pcs. - 6" x 6" x 3/8" x 24' - Grd CSA G40.21-13 50W Class C - approx. 2000 lbs.

470
Carbon Steel Square Tubing
- 5 pcs. - two 5" x 5" x 9 1/6" x 24' - three 3" x 3" x 1/2" x 24' - approx. 2350 lbs.

471
Carbon Steel Square Tubing & Channel
- 6 pcs. - tubing, two 3" x 3" x 3/16" x12' - channel, four 1 1/2" x 3" x 3/16", two 12' , two 10' - approx. 400 lbs.

472
Square Tubing, Carbon Steel
- 6 pcs. - two 6" x 6" x 7/16" x 24' - one 5" x 5" x 1/4" x 24' - two 3 1/2" x 3 1/2" x 1/4" x 24' - one 3" x 3" x 1/8" x 24' - includes 4 shorter pieces, 5" x 3" x 5/16" 7' - approx. 3000 lbs.

473
Expanded Metal Grating
- stainless steel - 16 pieces, 18" x 48" - 1/16" thickness - 1/2" opening

474
Work Station
- metal work surface with 4" backsplash - 97 1/2" x 36" x 40" - wooden frame & lower shelf - 4" x 4" pressure treated legs & 2" x 4" construction

475
Acetylene Tanks
- two tanks, 19" tall - with torch heads, hose & gauges - as found

476
Aluminum Cladding
- some cut, some full sheets - 4" - 48" width - 4' to 9' lengths - various profiles

477
I Beams
- 5 pieces - height 4 1/2', Flange 4" - 5/16" web, 3 pieces, 23', 8', 8' lengths - 1/4" web, 2 pieces, 8' & 7' lengths - approx. weight: 500 lbs.

478
Carbon Steel Tubing
- 4 pieces - 5 x 5 x 1/4, 10' - 8 x 8 x 3/8, 11.25' - 6 x 4 x 1/4, 17' - 4 x 4 x 1/4, 21.75' - approx. weight: 1110 lbs.

479
Carbon Steel Tubing
- 6 pieces - 3 x 3 x 3/8, approx. 27' long - 5 pieces 3 x 3 x 5/16", 27' each - approx. weight: 1700 lbs.

480
Carbon Steel Tubing
- 12 pieces - 8 pieces, 1 x 3 x 3/16", approx. 27.5' long - 2 pieces, 4 x 3 x 1/4", approx. 27.5' long - 1 piece, 2 x 4 x 3/16", approx. 27.5' long - 1 piece, 5 x 3 x 5/16", approx. 17' long - approx. weight: 1550 lbs.

481
Carbon Steel Mixture
- angle iron, I beam, channel & tubing - angle iron, 5 pieces, 4 x 4 x 1/2", approx. 23' long - angle iron, 4 pieces, 8 x 4 x 1/2", approx. 9' long - angle iron, 1 piece, 5 1/2 x 4 x 7/16", approx. 11.5' long - angle iron, 1 piece, 5 x 5 x 5/8", appr...

482
Aluminum & Carbon Mixture
- Ibeam, channel, angle iron and more - aluminum Ibeam, 3 pieces, 6 x 3 1/2 x 5/16", 4.5' to 7.5' long - aluminum channel, 8 pieces, 6 x 3 1/2 x 5/16", 2' to 4 1/2' long - and other pieces - carbon steel angle iron, 7 pieces - painted bar, 2 pieces,...

483
A 36 Carbon Steel
- angle iron & more - angle iron, 10 pieces, 3 x 4 x 1/4", approx. 20' each - angle iron, 1 piece, 3 x 4 x 1/4", approx. 16' each - angle iron, 1 piece, 3 x 4 x 5/16", approx. 13.5' each - angle iron, 7 pieces, 3 x 3 x 1/4", approx. 5.5' long each - ...

484
A 36 Carbon Steel
- angle iron - 19 pieces, 3 x 2 x 1/4", approx. 20' each - 1 piece, 3 x 2 x 1/4", approx. 16' - 1 piece, 3 x 2 x 1/4", approx. 9' - 3 pieces, 2 x 2 x 3/16", approx. 20' - 4 pieces, 2 1/2 x 2 x 1/4", approx. 19' - 2 pieces, 3 x 2 x 1/4", approx. 20' -...

485
A 36 Carbon Steel
- angle iron - 18 pieces, 2 1/2 x 2 1/2 x 3/16", approx. 20' - 3 pieces, 2 1/2 x 2 1/2 x 1/4", approx. 20' - 2 pieces, 3 x 4 x 1/2", approx. 10' - 2 pieces, 2 x 3 x 1/4", approx. 20' - 2 pieces, 2 x 2 1/2 x 3/16", approx. 20' - 4 pieces, 3 x 3 x 3/6"...

486
A 36 Carbon Steel
- angle iron - 4 x 4 x 1/2", 1 piece @ 14.5' - 5 x 3 x 1/2", 1 piece @ 14.5' - 3 1/2 x 3 x 1/2", 1 piece @ 8' - 3 x 2 x 1/2", 3 pieces @ 20' - 3 x 3 x 1/2", 2 pieces @ 20' - 5 x 2 1/2 x 3/8", 1 piece @ 16' - 2 x 3 x 1/2", 1 piece @ 9.5' - 3 x 4 x 1/4...

487
A 36 Carbon Steel
- Bar - 4 x 3/8", 1 piece @ 10' - 4 x 1/4", 1 piece @ 6' - 6 x 1/2", 1 piece @ 15' - 5 x 1/8", 1 piece @ 8' - 3 1/2 x 1/2", 2 pieces @ 20' - 3 x 3/8", 1 piece; @ 19' - 4 x 3/16", 2 pieces @ 20' - 4 x 1/8", 1 piece @ 20' - 6 x 5/16", 1 piece @ 20' - p...

488
A 36 Carbon Steel
- tubing pipe and channel Tubing - 2 x 2 x 1/4", 4 pieces @ 24' - 5 x 2 x 1/8", 2 pieces @ 24' - 2 x 3 x 1/4", 1 pieces @ 24' - 2 x 3 x 3/16", 1 pieces @ 24' - 1 x 1 x 1/8", 5 pieces @ 24' - 3 x 3 x 5/16", 1 piece @ 23' - 2 x 3 x 3/16", 1 piece @ 24'...

489
A 36 Carbon Steel
- tubing & channel Tubing - 4 x 2 x 1/8", 2 pieces @ 18', 1 piece @ 15', 2 pieces @ 14' - 1 1/4 x 1 1/4 x 3/16", 1 piece @ 24' - 2 x 3 x 1/4", 1 piece @ 22' - 2 1/2 x 2 1/2 x 1/4, 1 piece @ 18' - 2 x 2 x 1/4", 1 piece @ 22', 1 piece @ 10' - 1 x 2 x 1...

490
A 36 Carbon Steel
- tubing & channel Tubing - 2 x 2 x 3/16", 4 pieces @ 24' - 1 1/4 x 1 1/4 x 1/8", 4 pieces @ 24' - 1 x 1 x 1/8", 4 pieces @ 24' - 1 x 3 x 1/4", 1 piece @ 24' - 2 x 2 x 1/4", 3 pieces @ 24' - 2 x 1 x 1/8", 1 piece @ 24', 1 piece @ 10' - 3 x 3 x 5/16",...

491
A 36 Carbon Steel
- 4 shelves - mixture tube, channel, bar and pipe - lengths up to 24' - approx. 25-33% the total weight of previous 8 lots

492
A 36 Carbon Steel
- pipe - 1/2" to 4 1/2" diameter - 1/8" to 1/4" wall thickness - lengths up to 20' - approx. 25 pieces

493
A 36 Carbon Steel
- pipe - 3/4" to 4 1/2" diameter - 1/8" to 1/4' wall thickness - lengthsup to 20' - approx. 15 pieces - includes one piece 2 1/2" diameter, 6 1/2' long

494
A 36 Carbon Steel
- tube, channel & pipe Tube - 3 x 2 x 1/8", 1 piece @ 28' - 3 x 1 1/2 x 3/16", 3 pieces @ 28' - 4 x 4 x 1/8", 1 piece @ 8' - 2 x 2 x 3/16", 1 piece @ 20' - 3 x 3 x 5/16", 1 piece @ 10' Channel - 3 1/2 x 8 x 1/2", 2 pieces @ 20' Angle - 6 x 6 x 1/2", ...

495
A 36 Carbon Steel
- angle iron, channel, tubing, I beam - lengths up to 20' - 1/4 to 5/8" thickness - see photos for details

496
A 36 Carbon Steel
- tube, channel & angle iron Tube - 2 1/2 x 2 1/2 x 3/16", 1 piece @ 22' - 2 x 2 x 3/16",1 piece @ 19' - 4 x 4 x 5/16", 1 piece @ 21' - 2 x 3 x 3/16", 1 piece @ 11' - 3 x 3 x 1/4", 1 piece @ 10' - 4 x 4 x 5/16", 1 piece @ 10' - 2 x 2 x 5/16", 1 piece...

497
Stainless Steel
- tube, bar, angle & channel Tube - 6 x 6 x 1/4", 1 piece @ 13.5' - 6 x 2 x 1/4", 1 piece @ 7' - 6 x 2 x 1/4", 1 piece @ 4.75' - 2 x 1 x 1/8", 1 piece @ 9.75' - 1 x 1 x 1/8", 1 piece @ 23' - 2 x 1 x 1/8", 1 piece @ 10' - 2 1/2 x 2 1/2 x 3/16", 1 piec...

498
Stainless Steel
- tube, bar and angle Bar - 4 x 3/16", 1 piece @ 11.5' - 2 x 7/16", 1 piece @ 12' - 1 1/2 x 1/8", 3 pieces @ 12' - 1 1/2 x 3/16", 1 piece @ 12' - 1 x 3/8", 1 piece @ 6' - 1 1/2 x 7/16, 1 piece @ 6.5' - 1 x 1/4", 1 piece @ 10' - 1 x 3/16", 3 pieces @ ...

499
Stainless Steel
- angle, tube, bar & channel Angle - 2 x 2 x 3/16", 1 piece @ 21' - 1 1/2 x 1 1/2 x 1/8", 3 pieces @ 8 1/2', 20' & 20' - 2 1/2 x 2 1/2 x 5/16", 1 piece @ 8' - 2 1/2 x 2 1/2 x 1/4", 1 piece @ 18' - 2 x 2 x 3/16", 1 piece @ 20' - 4 x 3 x 5/16", 1 piece...

500
Stainless Steel & Carbon Steel Mixture
Carbon Steel - channel, 12 x 3 x 5/16", 1 piece @ 9' - tube, 6 x 4 x 1/4", 1 piece @ 10' - tube, 1 1/2 x 3 x 1/8", 1 piece @ 24' - tube, 5 x 5 x 5/16", 2 pieces @ 24' and 12' Stainless Steel - tube, 4 x 4 x 3/16", 1 piece @ 9 1/2' - channel, 10 x 2 1...

501
Mixture of Stainless, Carbon & Copper
Stainless - angle, 2 1/2 x 2 1/2 x 1/16", 2 pieces @ 10' - tube, 3/8", 1/8" wall, 50 linear feet - pipe, 1" diameter, 1/8" wall, 1 piece @ 8 1/2' - 2" diameter, 1/16" wall, 1 piece @ 10' - 2" diameter, 1/8" wall, 1 piece @ 19' - 1 1/4" diameter, 1/8"...

502
Crib & Contents
- sheet metal, expanded metal, checker plate, wire mesh - stainless & carbon Stainless Wire Mesh, 5'10" x 4', sheet 4'x 8' x 3/16" thickness Carbon Plate - 3' x 5' x 3/16" - 4 1/2' x 4' x 1/2" - 2 1/2' x 5' x 7/16" - 5 1/2' x 4' x 1/2" - 4' x 8' x 1/...

503
Carbon Steel Pipe & Tube
Pipe - 1 1/2" diameter to 8 1/2", up to 24' lengths - 1 1/2" diameter, 3/16" wall, 1 piece @ 24' - 2" diameter, 1/4" wall, 1 piece @ 18' - 2 1/2" diameter, 1/4" wall, 1 piece @ 18' - 3" diameter, 1/4" wall, 1 piece @ 17' - 3" diameter, 1/4" wall, 1 p...

504
Carbon Steel Pipe
- 1/2" to 3 1/2" diameter - lengths up to 21' - thicknesses up to 1/2" - see photos - approx. 50 pieces

505
Stainless Steel Pipe
- 1/4" up to 4" diameter - assorted lengths up to 20' - 40 to 50 pieces

506
Stainless Steel Pipe
- 300 Series - 4 1/2" diameter, 3/16" wall thickness, 3 pieces @ 10.5', 15', 20' - 6 1/2" diameter, 7/16" wall thickness, 2 pieces @ 7' & 9.75' - 8 1/2" diameter, 5/16" wall thickness, 1 piece @ 21' - plus approx. 25 additional pieces of various leng...

507
Stainless Steel Pipe
- 300 Series - primarily Schedule 40 & 80 - up to 20' lengths - 1" to 5 1/2" diameter - 30 pieces plus

508
Tiered Rack Unit
- 16'4" long - 6' wide at base - 4 tiers - contents NOT included - constructed of 3 x 2 tubing - welded steel construction - not to be picked up until end of sale pick up - matches lot 509

509
Tiered Rack Unit
- 16'4" long - 6' wide at base - 4 tiers - contents NOT included - constructed of 3 x 2 tubing - welded steel construction - not to be picked up until end of sale pick up - matches lot 508

510
Double Cantilever Shelving
- 19' long - 9 1/2' tall - 82" wide - 4 columns at 9 1/2' high, 82" at base - 18 arms, 40" long - contents NOT included - to be picked up at end of sale pickup

511
Cantilever Shelving
- 85" long - 11'7" tall - 60" wide - 2 columns at 11'7" high, 60" at base - 8 arms, 52" long - contents NOT included - to be picked up at end of sale - unit currently tacked to building, bring torch or angle grinder

512
Tiered Steel Rack
- 14' long - approx. 63" deep at base - approx. 120" high - welded channel construction - 7 tiers - unit tacked to building, bring torches or angle grinder - to be removed at end of sale - contents NOT included

513
Aluminum Sheets
- partial sheets - 4' - 8'l - 2' - 3'w - 1/4" - 1/8"

514
Aluminum Sheets
- full & partial sheets - all 1/8" thick - two 120" x 60" - two 120" x 48" - 103" x 60" - 103" x 42" - 48" x 34" - 41" x 33" - 54" x 38" - 48" x 45" - 42" x 38" - 48" x 45" - 47" x 48" - 80" x 49" - approx. weight: 650 lbs.

515
Stainless Steel Sheets
- 60" x 54" x 1/8" - 70" x 48" x 1/4" - 64" x 20 1/2" x 1/4" - 53" x 60" - 48" x 120" x 1/4" - approx. 15 pcs. total

516
Aluminum Sheets
- 96" x 48" x 1/4" - 82" x 48" x 3/8" - 25" x 96" x 3/8" - 144" x 60" x 1/8" - 120" x 60" x 3/16" - plus 8-10 smaller pieces approx. 4' - 6'l, 48" - 60"w - approx. weights: 600 lbs.

517
Aluminum Sheet
- 144" x 48" x 3/8" - 1 pc. - with protective wrap - approx. weight: 254 lbs.

518
Carbon Steel Cutoffs & Partial Sheets
- one 120" x 60" x 5/8" - remainder ranges from 1/8" - 1/4" thick - various lengths and widths up to 10'l - large quantity

519
Pipe Assortment
- 126" length of 1 1/4" schedule 160 - low carbon schedule 80 - approx. 28 pcs. in total, 2 1/2' to 11' lengths - assortment as pictured

520
Counterbalance Weight
- approx. 13" x 13" x 10" - total height to top - guaranteed to keep your canoe from drifting

521
Hardware Assortment
- full thread stud 7/8 - 9 x 5 3/4" approx. 125 pcs. - nuts to fit studs - 5/8" x 4 1/2" zinc plate bolts - 3/4" x 3" zinc plate bolts - quantity of large washers - roofing screws - & more

522
Large Workbench
- approx. 199"l x 36"d x 40"h - 4" backsplash on back and one end - metal top, approx. 1/16" thick *Some disassembly may be necessary to move*

523
Time Clock System
- Simplex 100 with user guide, time card rack & buzzer - system in working order **Purchaser to remove from wall**

524
Fire Rings
- three 32" diam. x 8 1/4" x 3/16" - 32" diam. x 12" x 3/16"

525
Jobsite Box
- 36" x 25 1/2" x 21" plus handles - can be locked - steel construction

526
RC Cola Cooler/Dispenser
- 35" x 28" x 80" - set up for 8 varieties - will accept dollar coins - functional status unknown, as found

527
Generator
- Aztec generator, Tecumseh engine - 7250 max. surge output - three 120v outlets - one 240v outlet - unit has good compression, functional status unknown

528
Pallet Forks
- 4" x 48"

529
Tarps
- load tarps, fuel cans & tub - large heavy duty load tarp - light duty small poly tarp - plastic tub - 2 fuel cans

530
Welder & Cooler
- Millermatic welder style JK-33 - cooler with Procon pump - units as found, functional status unknown

531
Pipe
- Shedale 40, 10" diam. x 60" stainless pipe - 3 fabricated pieces - approx. 15 1/2" diam. x 18"

532
Port-A-Spot Welder
- by Control Systems, Windsor Ont. - unit as found, functional status unknown

533
MIG Wire Feed & Cooling Pump
- Linde WC-5 cooling pump - Linde MIG-35 wire feeder - fire extinguisher, welding hose & torch tip - all as found, functional status unknown

534
Rotator
- foot control - MSC speed control - unit as found, functional status unknown

535
Aluminum Stock - Extruded T65
- angle 6" x 4", 4" x 4", 2 1/2" x 2", 3" x 2 1/2" - approx. 16 pc. are 20 plus some shorter ones - primarily 1/4" & 3/8" thickness - bar & tube stock, 8' to 20' lengths - 6 pcs. are 20', 6 pcs. are shorter

536
Sea Container
- approx. 30'l x 8'w x 8 1/2"t - aluminum, hinged, flip out ramp with counterweights - contents NOT included

537
Steel Work Table
- 88" x 57" x 32" - 5/8" work surface - lower storage shelf

538
Steel Storage Bins
- pair of steel storage boxes - wire mesh & tubular steel, 2 drop down sides, 40" x 35" x 32" - welded steel, 41" x 29 1/2" x 29 1/2"

539
Steel & Racks
- tubing, channel, angle, pipe, I beam - largest pipe 20" diam. x 19' x 3/8" thickness - second pipe 14" diam. x approx. 12' x 3/8" wall thickness - 12" I beam, approx. 8'l - bar stock 2 1/2", 3 1/2", 4 1/2"w, 1/2" to 1" thickness, various lengths - ...

540
Metal Cutoff Saw
- with vise & roller feed - approx. 14" blade - 1725 rpm, 3hp - untested, power cord cut off - included wooden trolley, solid rubber swivel casters

541
Aluminum Pieces
- 1 pc - 5' x 6' x 5/8" aluminum - 5 pcs - 5' x 5' 8" x 3/8" Aluminum - 1 pc - 6'-2 x 25" x 1/8 Aluminum - 1 pc 4' x 40" x 1/8 Aluminum - 1 pc 49" x 22" x 1/8 Aluminum - 1 pc 4' x 34" x 1/8 Aluminum

543
Aluminum
- 1 pc - 5' x 6' x 5/8" aluminum - 5 pcs - 5' x 5' 8" x 3/8" Aluminum - 1 pc - 6'-2 x 25" x 1/8 Aluminum - 1 pc 4' x 40" x 1/8 Aluminum - 1 Pc 49" x 22" x 1/8 Aluminum - 1 pc 4' x 34" x 1/8 Aluminum

542
Hitachi Cordless Hammermill Dril
- model DV 18DL - comes with three chargers for batteries - tested and working

543
2 Steel Shelving Units
- approx. 6' x 6' x 24" - very structurally strong - contents on shelves not included to be picked up late Tuesday

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Large Welding Shop Auction for PDS Welding - Milton
 Online Only Auction
Auction Date(s)
Bidding Starts: Sunday Sep 16
Bidding Ends: Thursday Sep 20
Auction Location
Milton, ON L9T 5A6
Full Address Available on Saturday, Sep 15
Company
Rapid-Sell c/o David Moore & Associates Inc.

Website: www.mooreandassociates.on.ca

Listing Terms and Conditions
Terms and Conditions - To Bid and Buy REGISTRATION & IDENTIFICATION: At the time of registration, we collect information about you to verify who you are before you can bid. We collect credit card information to ensure that you are a qualified buyer. All bidders must be of legal age to bid. PAYING FOR YOUR PURCHASES: There is no cost to register for an auction. Your credit card will not be charged unless you win. When an auction closes, if you are the winner, we will charge your credit card with the winning bid amount, plus applicable Buyers Premium and taxes, as stated in terms of auction. Credit Cards include Visa and Mastercard only. Vehicles must be paid for entirely by bank draft either prior to or at time of pickup. REVIEWING YOUR BIDS: During an auction you can check the status of your bids at anytime. Note that no bids can be withdrawn after the auction for any reason. All items are sold as is, where is, with all faults. BIDDING NOTIFICATIONS: You can choose to be notified by e-mail during the auction if you have been outbid. Please note that outbid notifications are NOT sent out during the last two hours of the sale. WINNING NOTIFICATION & INVOICING: All winning bidders will receive an e-mail with an attached invoice from sales@rapid-sell.ca the morning after the auction closes. If you'd like to know whether you won a lot at the close of the auction, check your "bidder history" -- if it says "you will be notified" that means you are the high bidder on the lot. If you are not the high bidder, it will say "you have been outbid." PICKUPS & REMOVALS: Dates and times for pickup will be posted on our website. We do not ship. Do not bid if you are unable to have your items picked up. Any item not picked up during the posted pickup times will be considered an abandoned item. Items are sold as is, where is, with all faults. If you abandon or fail to pick up an item, your credit card will be charged for the purchase price of the item plus a minimum administration fee of $25 plus labour and trucking fees to remove the purchased items from the auction site during the scheduled pickup time. CONDITIONS OF ITEMS SOLD & OUR ONLINE CATALOGUE: Our best efforts are made to represent all items accurately in descriptions and photographs; however, all items are ultimately sold on an 'as is, where is' basis, with all faults. We strongly encourage all bidders to personally verify the condition of each item during the scheduled preview times. No responsibility is assumed by Rapid Sell or the seller for any errors or omissions. CLAIMS: No claims regarding goods purchased will be allowed. Bidders are reminded that all goods are sold on an 'as is, where is' basis, with all faults. PERSONAL & PROPERTY RISKS: We will not be liable for damage or injury to individuals or their property. ADDITIONS & DELETIONS: We reserve the right to remove and/or add lots and/or items to the sale at any point during the auction. BUYERS: The BUYER expressly agrees to indemnify and save Rapid Sell, the Seller and their assigns harmless from and against all claims, losses, expenses, damage or liability, directly or indirectly caused by or resulting from an act, including the negligent acts or omissions of Rapid Sell, or anyone acting in his/her behalf in connection with or arising out of auction. All bidders/buyers must be of legal age. RESERVE: Seldom are items sold with Reserve. If an item is being sold with a reserve, it will be clearly marked and identified. For items sold with a 'reserve', you will be required to pay a minimum amount in order to win the item. AUCTION RECORDS: In the unlikely event of a dispute, you agree to accept as true the information that we have in our records. SOFT CLOSE: Items close at regular intervals. To prevent a bidder from 'sniping', all bids made in the last minute of the auction will force an item to stay open for an additional 3 minutes. This will continue until all bidding has ceased. STRATEGY: We recommend that ALL BIDDERS put in their maximum bid when placing a bid online. This does not mean you will have to pay the amount you bid; you only pay one bid more than the next highest bid, and only up to your maximum bid. The software system will play out the bids as you would at a live auction and only uses the funds required to beat out the under-bidder at the prescribed bid increment. CATALOGUE ERRORS & OMISSIONS: If a description does not match a picture in a lot, the description takes precedence. All items are sold on an 'as is, where is' basis, with all faults. EMAIL COMMUNICATIONS: As per Canada's new anti-spam legislation (effective date July 1, 2014), we are required to secure your consent to communicate with you electronically. By registering for this auction, you are opting in to receive auction notices from Rapid-Sell.ca (sales@rapid-sell.ca). You may withdraw your consent at any time by clicking on the unsubscribe link contained within each auction notice. Your privacy is important to us -- your email address will not be shared with any other party. By bidding you are acknowledging agreement with the terms above.Do not bid unless you agree to all of these terms.

1
Lincoln Electric Precision TIG Welder
- square wave power source, Microstart II - with ground clamp & cable plus TIG torch & stick welder - pulse feature - with DC & AC - includes regulator but not bottle shown - water cooled - in working order - 600/460/230

2
Lincoln Electric CV300 MIG Welder
- wired 600 - with wire feed, LN-7 - includes ground clamp & cable - includes regulator but not bottle shown - in working order

3
Lincoln Electric 355 TIG Welder
- square wave - AC/DC TIG & stick arc electrode holder & cable - with ground clamp & cable - 575v - water cooled ?? - in working order

4
Lincoln Electric CV250 MIG Welder
- with wire feed LN-7 - custom made base with swivel casters and arm extension for wire feed, approx. 8' - 230/60/575, wired 575 - with ground clamp & cable - does not include tank shown - in working order

5
Lincoln Electric CV-250
- MIG welder with wire feed LN-7 - custom made base with casters, 2 fixed 2 swivel - 230/460/575, wired 575 - with ground clamp & cable - does not include wire or tank shown

6
Lincoln Electric Power MIG 350 MP
- MIG welder - 230/460/575, wired 575 - with ground clamp & cable - does not include tank shown - in working condition - TIG capabilities, scratch start

7
Miller Delta 450
- DC arc welder power source - includes additional Miller DVC DW2 MIG welder - includes ground clamp & cable - dual wire feed with 2 whips - in working condition - 230/460/575, wired 575, 3 phase

8
Lincoln Electric Power MIG 350 MP
- MIG welder - with ground clamp & cable - does not includes tank shown - 230/460/575, wired 575 - in working condition - TIG capability, scratch start - with push/pull whip

9
Lincoln Electric TIG 355
- square wave AC/DC TIG & stick arm welding source - 230/460/575, wired 575 - with ground clamp & cable - does not include tank shown - not working, unknown problem - no whip or electrode holder

10
Lincoln Electric Ranger 250
- generator/welder - gas powered Kohler engine - 25hp, 8000w output as auxiliary power source - showing 477 hours - set up currently as stick welder - includes ground clamp with cable, electrode wand & cable - in working condition

11
Lincoln Electric TIG 355
- square wave AC/DC TIG & stick arc welding power source - 230/460/575, wired 575 - does not include tank shown - includes ground clamp & cable - includes TIG torch & foot control pedal K870 Amptrol - in working condition

12
PT-32 Torch
- Power Torch 11.25, ESAB - plasma arc cutting torch - wired 575 - includes custom made cart, 2 swivel & 2 fixed front casters

13
Welding Positioner/Rotator
- IRCO - model 3K6X6AB, serial 14308 - max load torque 18,000 lbs in rotation, 37,000 lbs. in tilt - includes IRCO control unit, model 14308 - with foot controller

14
Welding Positioner/Rotator
- IRCO Automation - model 3K6X6 - max load torque 18,000 in rotation, 30,000 in tilt - IRCO controller & foot pedal

14
Ameri-Can Upcut Saw
- with Tiger Stop push/pull positioner - 3 phase - foot pedal control - includes 6 blades, 15 1/2" diam., 1" arbor, 3 freshly sharpened, 3 without protective coating - 8' & 10' Tiger Stop roller tables, 18"w with Tiger Stop controllers - purchased us...

14
IRCO Rotator Accessories
- work supports - small chuck (fits inside main chuck) - two 8" casters on 36" beam - two 6" caster on 60" beam

14
550 Extension Cord
- approx. 45'l - working

15
Welding Positioner
- Irco - 575v, 3 phase - with foot control - tilt & rotate - footprint 43" x 50" - working

16
Miller Dimension 452
- CC/CV DC welding power source - with ground clamp & cable, electrode wand & cable - in working order

17
Sub Arc Machine
- 3 phase, likely 550 - approx. 12 1/2" mast, arm approx. 14 1/2"l, footprint 8' x 4' x 2" plate base - power source LIncoln Electric Ideal Arc DC-600 - wire feed Lincoln Electric NA-3N - has not been used in last 2 years **Purchaser to disassemble**

18
ESAB CV 450
- constant voltage welding machine - with ESAB MIG 35 - with ground clamp & cable - includes power cable - in working order - with custom made cart, 2 swivel & 2 fixed casters - 230/460/575, wired 575

19
Lincoln Electric CV-305
- MIG welder - with LN-7 wire feeder - includes whip, ground clamp & cable - 230/460/575, wired 575 - does not includes tank shown - in working order

20
Piranha P50 Iron Worker
- punch, shear & copper/notcher - 68" x 36" (at base) x 60" - foot control - 575 - includes 2 new punches - with notcher attachment also - in working order

21
Bee Metal Sander
- model 40P - serial 394 - belt sander 4"w - 51" x 33" x 42" - comes with 8 new belts, 36 grit - 575 - can be used in vertical or horizontal position - in working order

22
Leten Bandsaw
- DCM-4 - tabletop 23 1/2" x 19 1/4" - throat approx. 16 1/2" - variable speed - 43" x 27" x 77 1/4" - 575 3 phase

23
MAS Radial Drilling Machine
- model VR4A - 1500mm radial drill - 50 mm drill diam. - 1500 mm boom length - in working order - with vice as pictured, 10" - base footprint 88" x 35 1/2" - needs approx. 11 1/2" to expand to full height - new 5.5hp motor, 3 phase - includes chuck s...

24
Complex Drilling & Milling Machine
- model DM-30 - 12 speed - mill/drill/tap/bore/ream - includes 6" vice, as shown - mounted to steel table 46" x 27" x 32 1/2" - overall height approx. 88" - 110 - includes top cover, not shown

25
Lathe
- Potisje-Morando - bed approx. 90" end to end - includes centre support, chuck & tail - approx. 24" capacity - approx. 128" x 39" x 51"

26
Ridgid Auto Chuck Machine
- 535A series threading machine - with foot switch - with reamer, die head - on pipe stand 43" x 27" x 44" - 120v

27
Hyd-Mech Bandsaw
- model S-23 - pivot style mitering bandsaw - light to medium duty applications - table 70" x 19" - feed side 44" - 5 hp, 575v - 97" x 70" x 63" - includes 2 new blades in boxes

27
Roller Feed Table
- 153'l, roller spacing 6" & 12" - 20"w - 32"t - does not include metal shown stored under rollers

28
RCS 5 Ton Overhead Crane
- includes crane, crossbeam & tracks - approx. 30 1/2' span, approx. 110'l ***Purchaser to arrange disassembly. Pick up by appointment**

29
RCS 5 Ton Overhead Crane
- includes crane, crossbeam & tracks - 2 speed track drive - approx. 29' span x approx. 80'l **Purchaser to arrange disassembly. Pick up by appointment**

30
RCS 2 Ton Overhead Crane
- includes crane, crossbeam & tracks - approx. 23' span x approx. 51'l **Purchaser to arrange disassembly. Pick up by appointment.**

31
RCS Jib Crane
- 1000 lb. capacity - approx. 14' length *Purchaser to disconnect power cable at disconnect box*

32
RCS Jib Crane
- 1000 lb. capacity - approx. 14' length *Purchaser to disconnect power cable at disconnect box*

33
RCS Jib Crane
- 1000 lb. capacity - approx. 14'l *Purchaser to disconnect power cable at disconnect box*

34
Acetylene Torch
- includes heavy duty cart, lines, regulators & torch - tank not included - 14" solid rubber tires on cart

35
Clark Forklift
- 2 stage mast - propane - solid rubber tires - model C500-50 - no side shift - forks with extensions, approx. 86"l - leakage in hydraulics - needs extensive work for certification **No propane cylinders included, purchaser must provide** * Forklift ...

36
Clark Forklift
- model C500.50 LP - propane powered - solid rubber tires - 3 stage mast, side shift - 42" tires - leakage in hydraulics - needs extensive work for certification **No propane cylinders included, purchaser must provide**

37
Trinco Dry Blast
- sandblaster & supply tank - model 48X36-BP - includes pails full & partial bag of sand shown - Ebony-Grit copper slag by Opta Minerals

38
Partial Skid Sand Blast
- approx. 17 bags - 55 lbs./bag - Ebony-Grit copper slag Opta Minerals

39
Hotsy Pressure Washer
- steam cleaner - power by diesel, kerosene or Nol Heating Fuel - see photos for model, serial numbers & further information - in working order

40
Devil Bliss Air Compressor
- model 445 - Baldor motor 10hp - 575v - approx. 120 gallon tank *Purchaser to disconnect air at wall and BX cable at box*

41
Miller Portable TIG Welder
- Maxstar 150 LT - 115/230, currently 230 cord - in hard body case - with foot pedal controller RFCS-6M - includes ground clean up & cable - refer to photo for everything included in this kit

42
New & Used
- Blackstone ACF9005, used, untested - ESAP plasma cutting torch line, used, as found - see photos

43
Victor Cutting Gear
- 350 series regulator, acetylene - cutting tip, goggles , sparker - 1/4" x 25' grade RM dual holding hose - all new

44
Ramset Dyna Drill
- rotary hammer - model 332 - tested & working - includes Condrive 1000 in case - assorted bits, Ramset & UCAN - UCAN hammer caps

45
DeWalt Bandsaw
- heavy duty deep cut variable speed - model D28770 - in hardbodied case - tested & working - includes 2 extra blades

46
UCAN Fastener
- model LV470 - includes Winchester strip tools 5LV527, red - in hardbodied case

47
Milwaukee Sawzall
- heavy duty - model 6527 - tested & working

48
Fein Angle Grinder
- German made - model WSG12-70E - 120v - 2700 - 7000 rpm - tested & working

49
Portable Cutter
- Steel Max - 7.25" - model 2802 - 3500 rpm - tested & working

50
Makita Pair
- circular saw, 7 1/4", model 5007NF, 5800 rpm, working - hammer drill, model HP2010N, concrete/steel/wood, needs repairs

50
Bosch Drill Plus
- 18v Brute, tested & working, in hardbody case - includes Mastercraft angle grinder with assortment of grinding stones, 4 1/2", 7 amp, tested & working

50
Clamps & Pullers
- Stabil specialty clamp set, 4 clamps - 6" & 8" gear pullers

51
ER316/316L TIG Rod
- 2 full boxes, 10 lbs. each - 1/16" diam. - heat # 178336

52
ER 410 TIG Rod
- approx. 1.3 boxes, total approx. 13 lbs. - 3/32" diam. - heat # 43146

53
Executive 410 TIG Rod
- class ER410 - .062" diam. - heat # E31355 - almost full box 8 - 9 lbs.

54
Tech Alloy 410 NiMo TIG Rod
- class ER410 NiMo - 1/16" x 36" - heat 567721 - full box, 10 lbs.

55
Tech Alloy 410 NiMo TIG Rod
- class ER410 NiMo - 1/16" x 36" - heat 567721 - 2 partial boxes, approx. 10 lbs.

56
Lincoln Electric TechAlloy 410 NiMo TIG Rod
- class ER410 NiMo - 3 3/2" x 36" - full box, 10 lbs.

57
Weld Mold Company TIG Rod
- 938 FCT - 1/16" x 36" & 3 /32" x 16" - 2 partial boxes, approx. 16 lbs. (approx. 8 lbs. in each)

58
Executive 410 TIG Rod
- class ER410 - heat E31355 - .062" x 36" - partial box, approx. 5 lbs. - includes approx. 8 lbs. Executive 99 MIG rods, .093" diam.

59
Monel TIG Rods
- filler metal 60 - N60-093-10TS - heat M87W9G - .093" x 36" - full box, 10 lbs.

60
Exocor 320LR TIG Rods
- class ER320LR - heat QM763 - .062" x 36" - approx. 9 lbs.

61
Lincoln Electric & Unitec TIG Rod
- Lincoln Electric TechAlloy 410 NiMo, 3/32" x 36", approx. 5 lbs. - Unitec C32T16, 5/64" x 36", approx. 5 lbs.

62
Exocor TIG Rod
- ER1205-1 - 3/32" x 36" - partial box, approx. 8 lbs.

63
Inconel & Nickel TIG Rod
- Inconol Filler Metal 718, heat HT3189EY, .093" x 36", approx. 3 lbs. - Inconol Filler Metal 710, heat HT78W1Ey, .062" x 36" approx. 1 lb. - Nickel Filler Metal 61, heat NN6045HR, .125" x 16", approx. 5 lbs.

64
Inco Weld & Executive 410 TIG Rod
- Inco Weld ER317L, 1/8" x 36", approx. 8 lbs. - Executive 410, class ER410, .125" x 36", approx. 14

65
Blueshield & Executive TIG Rod
- Blueshield 308", class AWS ER308L, stainless rods, heat E100131, .062" x 36", approx. 3 lbs. - Blueshield 630-308L, stainless rods, heat 4D354, 1/8" x 36", approx. 1 lb. - Executive 99, class ERNi-cl, heat 201305-35001, .093" x 36", approx. 1 lb. -...

66
Rod Holder
- custom built aluminum - 20 compartments - approx. 28 1/2" x 12 1/2" x 26 1/2" - great for organizing rod, doweling or whatever - contents sold separately

67
ESAB MIG Spools
- Dual Shield FC 717 - 1/16", 60 lb. spool - 2 spools

68
ESAB MIG Spools
- Dual Shield FC 717 - 1/16", 60 lb. spool - 2 spools

69
ESAB MIG Spools
- Dual Shield FC 717 - 1/16", 60 lb. spool - 2 spools

70
ArcWeld MIG Spools
- EasyArc 706.045, mild steel wire - 1.1mm, 44 lb. spool - 2 spools

71
Lincoln Electric MIG Spools
- Techalloy 418 - MG418045667 - .045", 33 lb. - 2 spools

72
Lincoln Electric MIG Spools
- Techalloy 418 - MG418045667 - .045", 33 lbs. - 2 spools, 1 without box

73
MIG Spools
- NS 115 CF - .045" & .035" - 2 partial spools, approx. 25 lbs.

74
Lincoln Electric MIG Spools
- Super Glaze 5356 - aluminum MIG wire - .035", 20 lb. spool - 2 spools

75
Lincoln Electric MIG Spools
- Super Glaze 5356 - aluminum MIG wire - .035" - 2 spools, 1 partial, 1 full, approx. 30 lbs.

76
ER 4043 MIG Wire
- Lincoln Electric Super Glaze - 4043, 3/64" 20 lb. full spool - InWeld ER4043, 3/64" approx. 15 lbs.

77
ER 5356 MIG Wire
- Thermacote Welco, 1/16", 13 lb. spool - Harris Welco, .035", 10 lb. spool

78
MIG Wire, Nickel
- Executive 61, class ER Ni-1, .035", approx. 10 lbs. - Unibraze, class ER Nicu-7, .045", approx. 10 lbs. - Techalloy ERNicu-7, .035", 1 lb.

79
MIG Wire, Aluminum
- Indalco 5356, 3/64" - second spool, 3/64" - approx. 15 lb. total

80
ER 317L MIG Spool
- 2 spools, each 30 lbs. - Inco-Weld - .035" & .045"

81
NR-211MP MIG Spools
- Lincoln Electric Inner Shield - .045", approx. 40 lbs.

82
Gas Shielded Core Wire
- MIG spools - Lincoln Electric Outershield, 71M Ar/CO2, 2 partial spools, .045", approx. 5 - 7 lbs. - Lincoln Electric Metal Shield, MC-6 Ar/CO2, .045, 33 lbs. - Lincoln Electric Outshield, 71M, Ar/CO2, partial spool, 1/16" approx. 5 lbs.

83
Lincoln Electric MIG Spools
- Outershield 71M - 0 .045", approx. 50 lbs.

84
INCO-Weld MIG Spools
- ER-410 diam. .035", 30 lbs. x 2 spools - ER-410, diam. .035", very small amount - ER-410, diam. .045", approx. 7-8 lbs.

85
Metalloy 110
- .045" diam. - approx. 35 lbs. (full spool & partial)

86
Stainless Steel Wire
- ER308L, .035" diam., 25 lbs. - ER309L, .035" diam., approx. 15 lbs. - 309LSI, .035" diam., 25 lbs. - 316L, 3/32", approx. 50 lbs.

87
Nickel Alloy
- Inconel ERNICRNO-3, .045" diam., approx. 10 lbs. - Exocor 410 NiMo, .035", 12 - 15 lbs. - TechAlloy ERNiCu-7, .035" diam., approx. 5 lbs. - Unibraze ERNi-1, .035" diam., 33 lbs.

88
ESAB MIG Wire & Tips
- ER5356 HQ - one 16 lb. spool of 3/64" (1.2mm) diam. - ten 1 lb. spools of .035" (0.9mm) diam. - 2 pkg. (10 pcs.) 035MT style contact tips

89
Aluminum Welding Wire
- two 1 lb. spools ER5356 alloy, .90mm - 15 x 1 lb. spool 5554 alloy, .045"

90
Lincolnweld L-61 Coiled Wire & Reel
- 5/64' (2 mm), approx. 60 lb. coil - with a 17 1/2" diam. wire reel - includes partial spool ER805-B2

91
Special Metals Filler Metal
- 30 lb. spool NI-ROD filler metal 99, .045" diam. - 50 lb. spool MONEL filler metal 60, .093" diam.

92
Blueshield & Stoody MIG Wire
- Blueshield LAC-6, 45 lbs. spool, .052" - Stoody Company 965-G, .045", 33 lbs.

93
Lincoln Electric MIG Wire
- Outershield 71M, .045", 25 lbs. - Outershield MC-710, .045", 25 lbs.

94
Bonarc E309LT-1 MIG Wire
- 2 spools, 1/16" - both appear full - 30 kg.

95
MIG Wire
- Aversta Welding ER310 stainless, .035", 25 lbs. - Lincoln Electric Innershield NR-211-MA, .035", 25 lbs.

96
Lincoln & Techni Weld
- MIG wire - Lincolnweld L-50, .03", 30 lbs. - Techniweld, silicon bronze, alloy 656, .035", 25 lbs.

97
ESAB Dual Shield MIG Wire
- Dual Shield 7100 Ultra, .045", 33 lbs. - Dual Shield II 110, .045", approx. 20 lbs.

98
Stainless MIG Wire
- Kobelco, Premiarc EW-317L, .045", 28 lbs. - Inco Weld, Duplex 2209 ER2209, .045", approx. 20 lbs.

99
Stainless & All Purpose MIG Wire
- Cor-Met 410-FC-G, .045", approx. 25 lbs., stainless - Innershield NR-211MP, .035", approx. 25 lbs.

100
Assorted MIG Wire # 1
- ESAB Coreweld Ultra, .052", approx. 20 lbs. - ESAB Coreshield 15, .035", 10 lbs. - Lincoln Electric Metalshield MC-706, .045", approx. 15 lbs. - plus 4th partial spool

101
Assorted MIG Wire # 2
- 4 partial spools - includes approx. 5 lbs. Sodel 8259, Tungsten, carbide, diam. 1/16"

102
MIG Copper Coated & Others
- Techniweld ER-705-6, 2 spools, .023" diam., 33 lbs. & .030 diam., approx. 20 lbs. - Unitec Super 7, .045" diam., approx. 40 lbs. - includes 4th partial spool

102
Executive Furniture
- cherry finish - desk & credenza - 72" x 36"x 29 1/2", twin pedestal, 6 drawers - 66" x 20" x 29 1/2" - some scratches & scuffing noted - contents NOT included - includes carpet saver & chair shown

103
Rod Assortment # 1
- approx. 17 partial pkg. - primarily TIG - some flux coated brazing rod - lots of value here

104
Rod Assortment # 2
- approx. 30 partial pkg. - primarily TIG - aluminum, copper, nickel, stainless - check out the photos for the value here

105
Rod Assortment # 3
- approx. 14 partial pkg. - plus 2 storage tubes - many aluminum filler rods - plenty of value here

106
Gouging Rod
- copper clad pointed electrodes - 7 full & partial packages - 3/16", 5/16", 1/4" & 3/8" x 12" sizes - estimated to be 200 plus rods

107
Welding Electrodes
- 7 pkg., 1 full, 6 partial - full (11.2 lbs.) 253MA, 5/32" diam. - partials as pictured - includes 316L-17, 309L, 316L, E317-17

108
Welding Electrodes
- 6 pkg., 2 full, 4 partial - 7018-1 MR, 11 lbs. full - 316", 5/32", full - partial 316", E7018, 308-16

109
Welding Electrodes
- 6 pkg., 1 full, 5 partial - Monel N190, 10 lbs., 1 full - McKay, sterling 316L, partial - Blueshield, cast 99, partial - Sodel 309L-16, stainless, approx. 10 lbs.

110
Welding Electrodes
- 5 pkg., 2 full, 3 partial - Avestra 347/MVNb full, approx. 12 lbs. & partial - Avestra 347/MVNb partial - Unitec cast C-32 partial - Easy Arc 528 MR full, 4 kg.

111
Welding Electrodes
- 7 pkg., 3 full, 4 partial - McKay, 410 AC-DC, 1 full 4.54 kg., 2 partial - McKay, sterling 309L-17, 1 full, 4.54 kg, 1 partial - Sodel E309L-16, full, 11 lbs. - ESAB 317L-16, partial

112
Welding Electrodes
- 6 pkg, 3 full, 3 partial - ArcWeld Easy Arc 528MR, 1 full 4 kg, 2 partial - Lincoln Electric Excalibur 7018-1MR, full 5 kg - ESAB E7018-1, opened but appears full, 6 kg. - ESAB 7018-1, partial

113
Welding Electrodes
- 6 full boxes - Blueshield LA-7018 - 11 lbs. each

114
Welding Electrodes
- 7 boxes, 2 full, 4 partial - Lincoln Electric E7018-1, full box, 5 kg - E76018-7, full box, 5 kg. - ESAB E7018-1, almost full, 11 lbs. - 7018, large diam. - BOX, E7024 full 5kg., opened - Inweld SX544, partial - Arctec 2655 AC-DC partial

115
Welding Electrodes
- 5 boxes, 2 full boxes, 3 partial - Avestar 253 MA AC/DC, full box, 11 lbs. - Weld Mold 9580, full, 10 lbs. - Weld Mold 958, 1/8" & 5/32", 2 partial boxes - McKay sterling 308L-17, partial

116
Welding Electrodes
- 5 boxes, 3 full, 2 partial - McKay sterling 308L-17, full, 6 lbs. - McKay 330 AC/DC, full, 6 lbs. - ESAB E701-1, full, 6.2 lbs. - ESAB E308L-17, partial - Bonarc E308L-16, partial

117
Welding Electrodes
- 11 pcs. boxes & airtight containers - 6 boxes electrodes, 5 containers with electrodes - ESAC E316L-17, 2 full containers (1 opened) 4.3 kg. each - ESAB 7018-1, full & partial, 10 lbs. - Avesta 253 MA AC/DC, full, 11.2 lbs. - BonArc E308L-16, parti...

118
Welding Electrodes
- 3 full pkg. R308L-14 5/32" diam., 9.2 lb. each - partial pkg. R308L, 1/2 lb. - full & almost full E309-16, 3/16" diam., 19 lbs. total - full 309LC, 1/8" diam., 10 lbs. - full 316-16 5/32" diam., 10 lbs.

119
Welding Electrodes
- 14 boxes, 12 full - Bohler E312-16, 4 full boxes, 10 lbs. each - Bohler E410-16, full box, 4.5 kg. - MG stainless steel electrodes, Slik Stik 6309-L, full box, 10 lbs. - Bohler E502-16, 6 full boxes, 10 lbs. each - Bohler E347-16, 2 full boxes, 10 ...

120
Welding Electrodes
- 7018 & 8018 - 7018, 3 full boxes, 2 full tubes - 8018, 5 full tubes

121
Welding Electrodes
- Sodel 308L-16 x 27, 309L-16 x 2 - 29 full tubes - 10 lbs. each

122
Welding Electrodes
- Arcos E316L-16, 7 tubes, 10 lbs. each - Red Baron 317L-16, 2 tubes, one opened but full, 7 lbs. each - Inco 6280, 4 tubes, 4.5 kg each - All State H57, 2 tubes, 10 lbs. each - P7 AC/DC 1 partial tube - Incenel 132, partial tube

123
Welding Rod for the Vintage Shop
- 6 cans Lincoln Electric, unopened - 8018-CI MR - 5/32" - 50 lbs. each

124
Anti Spatter Compound
- 208 L barrel with pump - estimated to be 2/3 full

125
Welding Cable
- 2 gauge - 600v - approx. 50m combined

126
Welding Cable
- 2 gauge - approx. 40m - includes 2 cables with terminals each end, approx. 10'l

127
Welding Cable
- 2 gauge - 2 partial spools - 600v - approx. 420' total

128
Granular Flux
- 2 full pails Inco Flux 5, submerged arc flux - almost full pail Ultra Synthetic 951 - partial tin pail, unidentified product - 2 bags OK Flux, 10.16 & 10.90

129
Work Safely From Heights
- 3 safety harnesses - 2 tethers

130
Ground Cables & MIG Torch
- 2 ground cables, both with clamps - MIG torch ST-23A with lines - status unknown

131
Welding Helmets Plus
- 7 welding helmets, auto darkening in need of maintenance or repairs - 2 bump hats, white - 1 safety visor

132
Q Gun Cable Assembly Plus
- new Q Gun Cable Assembly, 15' - new inert gas hose, 10', with fitting - Lincoln Electric connector & tips, new

133
Tiger Torches
- 41" torch wand for propane - hand torch & line with regulator, propane tired

134
Shelf Lot
- lines & weld craft gun - cutting tips, new - copper tubing, cable - regulator, foot control - pipe cradles & more - all items as found

135
Hardware & Fasteners
- finished hex nuts grade 5 - 1/2" zinc washers - 5/8" x 2 1/2" grade 5 bolts - wood screws - & more - partial containers

136
Milwaukee Cut Off Saw
- 14" abrasive cut off - heavy duty model 6175 - 120w - 3500 rpm - tested & working

137
Welding Rod Oven
- 22 1/2"t - 11" overall width - 7" oven diam. - untested

138
Trumpf Plate Beveller
- portable bevel machine - model TKFB100 - tested & working

139
Flex Dispenser
- LM-100v, Lucas Milhaupt Inc. - untested

140
Saw Blades & Abrasive Wheels
- Royce 14" blade, 1" arbor - 14", 180 T, 1 1/2" arbor - Gladu 15", 1" arbor - 15", 1" arbor - blades appear new or freshly sharpened - abrasive wheels, 8 in total - 12" to 16" - steel & stainless steel

141
Grade 5 Bolts & Others
- 7/16", 1/2" & 5/8" - 2" to 2 1/2" length - full & partial boxes - 6 boxes in total

142
Lincoln Electric Spool Gun & Controller
- Magnum SG - spool gun & control module - module controls gas flow & wire speed - with regulator & lines as shown

143
Vice Grips & Others
- new in package Irwin vice grips, 2 IISP - pneumatic drill, Ingersoll Rand, model 7802A - Unitool RV rust proofing gun with cup

144
Tools, Soldering Flux Plus
- Wolverine paste soldering flux, four 1 lb. cans - 2 pairs aviation snips - rivet gun - & so much more

145
MIG Welding Guns
- gun & cable assemblies - used, status unknown, some may not be complete - at least 6 in total - leather gloves, leather welding hood with lens

146
Supply Closet
- metal shelving unit, 36" x 18" x 76" - 4' & 8' fluorescent tubes, status unknown - paper towels & toilet paper - rubber gloves - Rubbermaid industrial mop bucket - Fast Orange pictured has been used

147
Welding Positioner
- 1/2 hp Leeson, wired 110 - no tilt, rotation only - with foot controls - footprint 24" x 30 1/2" - controller only works on high & turn slowly

148
Starley Roto Star I
- welding positioner - with controller & foot pedal - 110v, tilt & turn - does not includes vice grips pictured

149
Welding Positioner
- tilt & rotate - with foot controller - 110v - footprint 39 1/2" x 31" - tested & working

150
Starley Roto Star I
- with controller & foot pedal - working - 100v - tilt & turn - clamp NOT included

151
Starley Roto Star I
- welding positioner - tilt & rotate - with foot controller - working - 110v - clamp included

152
Emco Welding Positioner
- working - with foot controller - 8" chuck - 110v - rotation only, no tilt

153
Adjustable Roller Bed
- Irco - model XHGK-10 - motor power 2 x 0.55 kw - loading 10,000 kg - footprint 120" x 44" - 600v, 3 phase - in working order

154
Adjustable Roller Bed
- 120" x 28" - 120v - in working order - 14"w roller

155
Adjustable Roller Bed
- 120v - status unknown - roller width 13" - approx. 120" x 27"

156
Electromagnetic Drill Press
- Milwaukee - in working order - 120v, 400 rpm, 3/4" capacity

157
Electromagnetic Drill Press
- Fein - model DSK-658-5 - 11v, 230/550 rpm - in working order - looseness in guides

158
Welder Cooler
- liquid cooled - 26" x 12" x 17 1/2" including aluminum mounting stand - working

159
Torch & Power-Weld Reel
- cutting torches with hose, reel, tank crib & 2 regulators - reel mounted to tank crib, Power-Weld, has automatic recoil - more than 40' of hose - crib 25" x 16" x 71" to top of reel - tank NOT included

160
Georg Fischer Pipe Cutter
- pipe cutter & chamfering machine - bench mounting - 120v - tested & working - includes 2 new blades

161
Bug-O Burner
- gantry system - Track Torch for straight line cutting - includes 2 sections of track, total of 12

162
Banding Machine
- metal banding machine on dolly - will accommodate up to 1" diam. band - includes partial spool 1/2" banding - includes assortment of metal clips, tightener tool & cutters

163
Electrode Stabilizing Oven/Flux Holding Oven
- Gullco - model 350 - single phase - 100 - 500ºF - 22" x 27 3/4" x 21 3/4" - contents of oven included

164
Ridgid Pipe Threader
- model 300 power drive - includes stand - foot control - 115v - in working order

165
Steel Work Table
- extra heavy duty - 5' x 10' x 33" - 2" plate steel top - items on table NOT included

166
Steel Work Table
- heavy duty - approx. 4' x 8' x 33" - 1/2" plate steel top - table only, other items pictured NOT included

167
Steel Work Table
- extra heavy duty - 62" x 97" x 35" - 1 1/2" plate steel top - with swing out platform 12" x 8" - items on top NOT included

168
Steel Work Table
- heavy duty - 5' x 10' x 32" - 1 1/4" plate steel top - 4 row of 3/4" holes on 4" centres - table only, other items NOT included

169
Steel Work Table
- heavy duty - 5' x 10' x 32 1/4" - 6 legs, 1 1/4" plate steel top - items on table NOT included

170
Steel Work Table
- 48" x 96" x 33" - 1/2" plate steel top - items on table NOT included

171
Steel Work TAble
- 47" x 94 1/2" x 34" - 3/4" plate steel top - items on table NOT included

172
Boardroom Table
- 96" x 42 1/2" tapering to 33" x 30" - big enough for the family dinner - some scuffing of surface

173
Boardroom Chairs
- 4 chairs, 3 pictured - 26" x 27" x 40" - be comfortable while making the big decisions or inputting for auctions

174
Canon Image Runner 323551
- purchased as a refurbished unit last year - good working order - will accommodate up to 12" x 18" paper - comes with an extra box of toner - fax, photocopy, scan, networked

175
Executive & Boardroom Chairs
- 2 styles - 1 executive chair, high back & solid wood arm rests, upholstered seat back with wood accents, 26" x 26" x 4" - 3 boardroom chairs, adjustable seat height, tilt arms, 25 1/2" x 25"

176
Oasis Watercooler
- top load - 13 1/2" diam. x 38 1/2"t (excluding bottle)

177
Eureka Upright
- 12 amp vacuum - bagless upright with Air Speed Technology - with hepa filter - removable canister, floor height adjustment - model AS1000 - tested & working

178
Bar Fridge & Microwave
- Woods, tested & working, 21 3/4" x 23 1/4" x 32 3/4" - Proctor Silex microwave with turntable, tested & working, 18" x 13" x 11", model E701NP-F

179
Welding & Fabrication Reference
- 38 volumes - see photos for subjects covered

180
Pressure Gauges
- 20 units - from 400 to 10,000 psi - no longer functional for calibration purposes

181
Flanges
- 4 copper combination flanges, 3", new - 2 stainless steel flanges, see photos for specs

182
Valves & Clamps
- NVC ball valves for 3/4" pipe to 316 mm - 2 sweat & 2 threaded - 4 heavy duty 2 1/2" clamps

183
Mainly Stainless Steel Hardware
- couplers - half couplers - inserts - end caps - assorted fittings

184
Hardware Assortment
- mix of copper, stainless & carbon steel - elbows - reducers - washers, nuts - flanges - & more

185
Testing Equipment
- vintage pieces - Alnor Pyron in case - & others

186
Fridge & Microwave
- Moffat refrigerator/freezer 30 1/2" x 29" x 65"h - Danby microwave 17 1/2" x 12 1/2" x 9 1/2" - both in working order - fridge contents NOT included

187
Small Appliances for the Lunchroom
- Black & Decker coffee maker - Proctor Silex 4 slice toaster - Hamilton Beach toaster oven - small electric kettle

188
Lunch Room Needs
- table & chairs - folding poly table, approx. 30" x 60" x 29" - includes 5 folding chairs and 3 stackable

189
Stainless Fittings
- 1/2" & 1 1/2" 90º short weld ends - male weld connectors 1/2" & 3/4" - tees & more

190
Assorted Fittings
- stainless connectors, 1/2" thread - stainless inserts 3/4" thread - steel & aluminum caps

191
Primarily Taps
- assorted sizes of taps, most appear unused - 1 reamer, 1" size - rethread die 1 1/8 - 12 rethread die

192
Gray Tools Torque Wrench
- micrometer adjustable - # 72100 - 3/8" drive, with case

193
Square & Punched
- machinist's steel square set, missing flat ruler - steel stamp letters set, 1/8", complete

194
Roller Pins & Punches
- 1/4" number set - roller pin assortment

195
From the Toolbox
- drives, utility knife, tape, caulking gun - useful assortment

196
Welder's Assortment
- approx. 6L Powerweld coolant fluid, strikers - flashback arrestor, safety plates (12), nozzle tips - tip dip, flints, boot covers & more - some new, some with experience

197
Primarily Tips
- adapter tips, gas lenses - contact tips - assorted sizes, lots of pieces

198
For the Welding Shop
- holder & wire guides - electrode holder - other assorted parts as pictured

199
Soapstone Markers
- approx. 96 sticks - almost full box of #1 round - complete with a pencil holder

200
Cut Off Wheels
- approx. 40 count - 7" x 1/8" x 7/8" - classic steel/cast

201
Aluminum Grinding Wheels
- approx. 30 count - 7" x 1/4" x 7/8" - ALU 24

202
Allsteel Grinding Wheels # 1
- 23 count 7" x 1/4" x 7/8" Walter Allsteel - 4 count 9" x 1/8" x 7/8" Walter A-30 combo

203
Allsteel Grinding Wheels # 2
- 45 count 4 1/2" x 1/4" x 7/8" Walter Allsteel

204
Grind Safely
- 5 new face shield visors - 22 count 4 1/2" x 1/8" x 7/8" Walter A-30 combo - 7 count 4 1/2" x 3 /64" x 7/8" Walter zipcut - 2 x 6" wire wheels - other abrasives

205
Abrasives Plus
- approx. 35 count 7" x 7/8" resin fiber discs, 24 grit - assorted grinding & polishing wheels - 4 count 1 3/8" hole saws, new - 2 cans grey enamel

206
Shop Supplies Plus
- 5 bottles solder paste - vise grips 12L6, wire brushes, drills bits & more

207
Regulators & Torch
- argon-nitrogen/helium regulator - Lincoln argon regulator/flow meter - Turbo Torch nitrogen regulator - Victor regulator - torch - all believed to be reconditioned units

208
Regulators
- 3 units in bags believed to be rebuilt - others as pictured

209
Gauges & Nozzles Plus
- 5 new PT-32 torch nozzles - new torch handle - new Winter's Process Gauge 4 1/2" dial - 4 used gauges - assorted nozzles with experience

210
Specialty Electrodes
- approx. 5 lb. Weld Mold No. 966 3/32" - 10 lb. McKay 2209 AC-DC, 1/8" - 10 lb. 317L/SNR - 10 lb. low carbon UTR 6809 No - 7 full or partial packs of tungsten electrodes

211
Socket Sets
- Gray 3/8" to 13/16" with ratchet & spare pieces - Craftsman 3/8" to 3/4", appears complete

212
Welding Assortment
- 2 pkg. (18 sticks) Thermanit JEW 308L-17 - collets, contact tips, gas lens caps - 2 x 15' liner conduit - gas lens bodies, caps, MIG parts & more

213
Welding Supplies
- repair & maintenance - name brand parts - Lincoln Electric, American Torch Tip, Parweld, Tweco Professional - brass nozzles, contact tips, centrefire nozzle cones, copper gas cups, torch head - & more

214
Tools Plus
- Walter wire cup brush, new in box, 3 x 5/8"-11 - Blueshield 300A ground clamp - impact sockets, 1/2" drive - Walter wire wheel brusk, new in box, 4 1/2" x 3/8" x 5/8"-11 - Grip On welding clamps - Blueshield Master gauge, fillet weld gauge, new in ...

215
Caliper & Die Grinder
- new in package - Wespro pneumatic die grinder, DG25H - Insize Digital Caliper

216
Die Grinder & Ratchet Wrench
- new in package - Ingersoll Rand 1/2" drive ratchet wrench, model 1077XPA - Parts Master die grinder, #800-0-0140

217
Hardware & Fittings
- 2 boxes full - brass, aluminum, stainless, carbon steel - useful assortment

218
Regulators, Ball Valves & More
- 2 Medalist regulators - 2 Pinacle ball valves 1-316 - & more - see photos for all that is included in lot

219
Gloves & Goggles
- approx. 14 pair new leather gloves - 2 pair experienced gloves - 4 pair new goggles

220
Gloves, Caps & More
- welders' needs - leather welding gloves, 6 pairs, new - welding caps, approx. 40 - toques & ball caps

221
Gaskets Plus
- 4" & 6" red rubber - bearing & oil seals - & more - see photos for details & specs

222
Grip Tight Test Plugs
- high pressure test plugs - GT4P80 - 2, new - 3.80 to 3.91

223
Grip Tight Pressure Testing Plugs
- model GT4P120 - 2 new in package - 3.60 - 3.74

224
Lincoln Electric Parts
- repair & maintenance - nozzles, nozzle insulators, cable lugs, contact tips - & more

225
Fittings Plus
- brass & copper - unions, washers & more

226
Tool Bag & Tools
- Jobmate soft bag tool bag, 15", wide mouth opening - telescoping gauges, sockets (metric & SAE), screwdrivers, wrenches

227
Toolbox & Tools
- 19" Stackon poly toolbox - includes all tools show in photos - driver bits, hex key, hammer, circuit tester & more

228
Toolbox & Contents
- 26" x 10" x 12" with interior lift out tray - Walter mini grinder - aviation snips - 10" locking pliers - & more

229
Vice Grips Plus
- two 11R - one 11SP - 2 Kanttwist clamps

230
Vice Grip Power
- 4 pcs. - three 11R - one 20R

231
Hardware & Tools
- from the tool chest drawer - 4 flashbacks arrestors, 2 oxygen, lacetylene, 1 propane - cutting torch 141C - pins, cable ties, assorted small hardware & much more

232
Drill Bits, Key Stock & More
- assortment of drill bits, experienced - Key stock, 2" to 9" lengths, 1/4" to 1/2" - & much more

233
File & Bind
- load binder strap & ratchet - 9 pc. file/rasp set - grinding wheels & wire wheels

234
Plano Small Parts Sorters
- 2 boxes, 14" x 9" x 2" - tips, connectors, clamps, bulb, assorted fittings, links, springs

235
Cutting Torches Plus
- 2 torch heads - taps - strikers - tip cleaners - & more

236
Barnes Submersible Pump
- appears as new - model SP33Vf - .2 hp / .33 - single phase 120v - 1/2 max hp - 1 1/2 discharge - includes garden hose - tested & working

237
Get Henry To Do It
- pneumatic International NRV200-22 dry vac - good working order - comes with a Shark upright, beater bar non-functional, unit runs

238
The Old Park Bench
- cast iron ends & back insert - one leg has been welded - some rebuilding necessary

239
Beach Toolbox & Contents
- 20" metal toolbox - with lift out tray - chipping hammers - hacksaw - file - & more

240
Tool Chest & Contents
- wooden tool chest, 32 1/2" x 12 1/2" x 12", with hasps for locking - contents include levels, ruler, hammers, clamps, screwdrivers & much more

241
Locking Wrenches
- 3 vise grip 11R - vise grip 10CR - vise grip 10WR - all grip locking clamp, with extra jaws not pictured

242
Milwaukee M-Spector 360
- rotating inspection scope (9mm) - with battery & charger - 2.7" LCD display, 3' cable - unit has seen minimal use, as new

243
Tool Assortment
- hex keys, metric & SAE - punches, chisels, knives & more

244
Sockets & Drives
- primarily 3/8" drive - regular, deep, impact - mix of metric & SAE - 1/2" to 3/4" adapter, knuckle & more - 6 ratchets, extensions & more

245
Wrenches & Hardware
- assorted wrenches & pliers - tool wrenches - stop watch, gauge, pipe cutters - Kant Twist clamp & more

246
Air Tools
- 3 Matrix die grinders - Westpro die grinder with extension - 1R air drill - air nozzle

247
More Air Tools
- CH 3/8" drive air ratchet - CH 1/2" drive impact wrench - CH air chisel - grinders & more

248
Sets
- hole saws, 1" to 4" with mandrel - power screwdriver & nut driver set - Unitool SAE hex set - Mastercraft wrenches 8mm to 22mm

249
Snap On & Adjustables
- 12", 10" & 8" adjustable wrenches - Snap-On wrenches 13/16" to 3/8", 7 pc.

250
Wrench Sets
- Craftsman 1 1/4" to 7/16", 14 pc. - Challenger by Proto 1" to 3/8", 11 pc.

251
Wrenches, Abrasives, Clamps
- 3 JayBe clamps - SAE & metric wrench assortment - grinding & cutting discs - wire brush, sandpaper & more

252
Tools in a Box Lot
- tapes, rulers, solder gun, hacksaw - auger bolts, assorted hardware & much more

253
Screwdrivers
- dozens & dozens - a useful assortment

254
Welding Assortment
- Easy Flo 45 wire - other electrodes - handy flux - new electrode holder & much more

255
Pounding Collection
- hammers - ball peen, framing, chipping - approx. 10

256
Work Safely
- eye protection - hearing protection - gloves - knee pads - respirator/masks - & a light for visual aid

257
Abrasives
- 14" cut off wheels, 4 pcs. - flap wheels - sanding drums - wire brushes - & more

258
Curv-O-Mark
- Jumbo Contour Market - compact & time saving - appears as new - for pipe layout and structural steel joints

259
Weldshop Assortment
- 2 pair locking chain pliers - new drill chuck model JT4, 1/16" to 3/4" - Drill Doctor - electrode holders - poly filter plates

260
Assortment For the Cupboard
- spare parts new & used - from machine screws to contact tips - CO2/argon regulator - brass, copper & more

261
Foot Pedal & Lines
- mix of new & used - status of all untested

262
Extension Cords & Trouble Light
- 3 heavy duty extension cords - note: one cord has 2 male ends - trouble light

263
Organizers
- 2 door cabinet with bins 23" x 10 1/2" x 58 1/2" including base, 48 bin drawers, lockable complete with key - 2 small plastic organizers, each 12" x 6" x 20"

264
Two Aluminum Tables
- 28 1/2" x 16" x 30 1/2", open front at bottom - 28 1/2" x 16 1/2" x 31", closed at front at bottom - custom welded construction

265
Folding Tables
- 72" x 30" x 29", damage to one corner - 60" x 29 1/2" x 29", good condition

266
Office Essentials
- 2 vintage metal desk & 1 watercooler - Steel Case double pedestal metal desks, 60" x 30" x 28 3/4" - Quantum watercooler, top load, 35 1/2"t excluding bottle

267
Mechanics Tool Chest
- Gray Tools - storage & work area - 5" hard rubber casters, 2 fixed & 2 swivel - graduated drawers, 9 in total - key missing, locking mechanism deactivated - top drawer not latching due to small bend - 42" x 19" x 40" (excluding handles)

268
Mechanics Tool Chest # 2
- 2 pc. Gray Tools set - lower unit 27" x 18" x 40" excluding handle - upper unit 26" x 16" x 19" - 5" casters, 2 fixed, 2 swivel - lid on upper box has had significant bend - no keys for unit, lower lock mechanism disabled

269
Autotransformer & Reduction Box
- Staco variable autotransformer - Baldor 58:1 reduction box - both untested

270
Toyoto Forklift
- 2 stage mast - propane powered - solid rubber tires - as found, currently not running **No propane cylinders included, purchaser must provide**

271
Magnetic Lifter
- Eclipse Magnetico - UltraLift - 60 lb. weight - model UL0500 + (UL1100+) - 1100 lb. capacity

272
Plywood & Chipboard
- full sheets - 7 sheets of each - primarily 9/16" thickness - 4' x 8' sheets

273
Linde Welder
- model DCL300 - 3 phase - DC-ARC welder - status unknown, plug has been cut off cord

274
Metal Bender
- 3 phase - 575 amp - 1 hp - with 3 extra roller, as pictured - footprint 32" x 35"

275
Ingersoll-Rand Air Compressor
- T30, model 242-5D - 575v, 3 phase - 5 hp Elektrim motor - unit was in good working order when taken out of service and replaced by a larger unit

276
Bewo Metal Chop Saw
- with vise, vise has 12" jaws, opens approx. 5" - type 315 LT circular saw - 2 speed, for stainless & mild steel - 18.5 & 37m/min - equipped with unique self-centering jaw system, clamping on both side of saw - fan coweling has been removed - status...

277
Lincoln Welder
- stick/TIG - square wave TIG 175 - 475/575 v - believed to be in working order - includes both wands, ground cable & carts

278
Memco Welder
- AC/DC 250 HF - with Miller Coolmate 4, believed to be non-functional - welder believed to be functional - includes foot control

279
Lincoln Sub Arc Machine
- Idealarc DC600 - with Lincoln Squirt Welder LN-8, wire feeder - flux tank - see photos for more details - status unknown

280
Wisconsin Air Cooled Motor
- 4 cylinder - with attached clutch - has not run recently but not seized - sitting on but not mounted to heavy steel grate, 36" diam. x 2 1/2" depth (not solid)

281
Crate Lot
- whips & cables - status unknown - mainly TIG & MIG - 36" x 36" x 28"

282
Crate Lot
- hardware & more - Gas Booster, model GBD-5 - stainless steel flanges - U bolts - fittings, bolts, lock nuts - flex tube - stainless steel tubing - & more

283
Skid Lot
- MPI fitting - solenoid valves - coil stainless flex - winters gauges, 60 psi, liquid filled - fan - & more

284
Box Lot # 1
- stainless steel fittings - inserts, reducers - hose couplers - couplers - 100 plus pounds

285
Box Lot # 2
- Swagelok fittings & others - brass & stainless - 100 plus pounds

286
Box Lot # 3
- fittings plus - mainly brass - Swagelok, top ring, cush-a-clamp, Spaenaur - Fisher Control 95L, 17057098

287
Box Lot # 4
- fittings & more - many new Swagelok fittings - see photos for details

288
Welding Screens
- AGO Industries - 2 screens with frames - 8' & 6 1/2', approx. 7't - both are experienced

289
Welding Screens # 2
- 2 screen with frames - approx. 4' & 6' lengths, approx. 6't - both are experienced

290
Welding Screens # 3
- 2 screen with frames - approx. 8 1/2' & 4 1/2'l, 6' & 6 1/2't - both are experienced

291
Welding Screens # 4
- portable screen - roller blind style, retractable - 6'w

292
Aluminum Tubing
- square, rectangular & round - includes some flat bar - rectangular 3" x 2" , two 20', one 15', approx. 1/8" - round 1 5/8" diam. 15' & 8'l, 2" diam. 8'l, 1" diam. 10' & 8'l, 1/2" diam. approx. 10', 2 1/2" diam. two 8'l, 3" diam. 6'l - square 3" x 3...

293
Aluminum Bar
- flat bar - 5" x 1/2" one 5 1/2' - 2" x 1/2" approx. 130 linear ft. - 1 1/2" x 1/2" approx. 120 linear ft. - 2" x 3/8" approx. 130 linear ft. - 3" x 3/8" approx. 40 linear ft. - 6" x 3/8" approx. 15 linear ft. - 5" x 3/8" approx. 5 linear ft. - 6" x...

294
Aluminum Angle Iron
- 2" x 2" x 1/4" approx. 80 linear ft. - 2 1/2" x 2 1/2" x 3/8" approx. 44 linear ft. - 2 1/2" x 2 1/2" x 1/4" approx. 103 linear ft. - 2" x 2 1/2" x 1/4" approx. 10 linear ft. - 2" x 3" x 1/4" approx. 13 linear ft. - 2 1/2" x 2 1/2" x 3/16" approx. ...

295
Aluminum Angle Iron # 2
- 3 x 4" x 1/4" approx. 29 linear ft. - 3" x 3" x 3/8" approx. 162 linear ft. - 3" x 4" x 3/8" approx. 18 linear ft. - 2" x 3" x 1/4" approx. 66 linear ft. - 3 1/2" x 5" x 3/8" approx. 5 1/2 linear ft. - 2 1/2" x 3" x 1/4" approx. 6 1/2" linear ft. -...

296
Aluminum Supplies
- flat bar, square tubing, angle channel, I beam - flat bar 5" x 3/8" approx. 24 1/2 linear ft., 6" x 1/2" approx. 29 1/2 linear ft., 8" x 1/4" approx. 13 linear ft., 2" x 1/2" approx. 20 linear ft. - tubing 2 1/2" x 2 1/2"x 1/8" approx. 11 linear ft...

297
Aluminum Supplies # 2
- channel, I beam, angle, flat bar - flat bar 4" x 1/2" approx. 20 linear ft. - I beam 3/12" x 6" x 3/8" approx. 10 linear ft. - channel 3 1/2" x 6" x 1/2" approx. 9 linear ft. - angle 4" x 6" x 3/8" approx. 26 linear ft., 3" x 4" x 3/8" approx. 202 ...

298
Aluminum Channel
- 4" x 12" x 1/2" - approx. 20 linear ft.

299
Contents of Shelves
- 4 shelves of useful items - BX cable, heavy welding cable, assorted connectors - metal toolbox - plugs, fuses, electric motor

300
Contents of Shelves # 2
- BX & heavy cable, some connectors - shut-off boxes - transformer

301
Chemicals & Paint
- 2 shelves - full & part containers - epoxy paint, industrial solvent, alkyd primer - heat & rust resistant paints - spray gun & pressure gauge

302
Galvanized Conduit
- 5 - 10' lengths of 1" conduit - threaded ends with couplers - one 7', 5/8" OD conduit

303
Shop Supplies
- box of gasket material, approx. 1/2" rope style plus 40' flat roll, 2 1/2"w - 2 boxes banding clips, 1/2"w, 4000 to 5000 clips - quantity of 2" nails - almost full reel of 16g, 2 conductor shielded cable

304
Work & Play
- Wedco 5 gallon fuel container - two 5 gallon marine tanks, 1 with hose, 1 without - Mastercraft lawn spreader, model CT100B - approx. 1 dozen dolly wheels

305
Louisville Fiberglass Ladder
- 8' step style - heavy grade 1 industrial - legs look good

306
Gaskets
- quantity of primarily rubber type gaskets - assorted sizes

307
Stainless Hose Clamps
- gear type hose clamps - approx. 145 stainless 9/16" to 1 1/4" - approx. 240 stainless 11/16" to 1 1/2"

308
Bin & Contents
- metal mesh bin, approx. 36" x 36" x 38" - pull plugs, 1 1/8" diam. x 3/4"l - 8 Cusha-Clamps, 1" - 2" cap plugs - quantity of gaskets

309
Toolbox & Contents
- chipping hammer - selection of sockets, mostly Craftsman - 21" cantilever toolbox

310
Pipe Roller & Beam Trolley
- incomplete Sumo 2 ton beam trolley - adjustable height pipe roller

311
Trolley & Contents
- 16 bins - assortment of stainless & carbon steel fittings - NSF rack 36" x 14" x 55 1/2"

312
Steel Workbench & Contents
- bench 72" x 22" x 58 1/2", 2 legged, **purchaser to unfasten from wall** - 1/2" nuts, washers, bolts, assorted sizes - strap ratchets - bags of pipe caps - 3" bench vice

313
Extension Ladder
- 24' - legs are good - slight bend in rail at top - grade 3

314
Ridgid Tri Stand
- no. 460 Ridgid tri stand - 1/8" to 6"

315
Hose & Pump
- hydro test pump needs a rebuild - 1/4" diam. flex hose on reel - pressure washer ward & hose - assorted garden hose

316
Whirlpool Washer
- unit untested - commercial quality super capacity - porcelain basket

317
It's the King
- King Canada 14" cut-off saw - 15 amp, 3750 rpm

318
Sumo Two Ton Chain Hoist
- serial 950119 - model SH20

319

320
Break Time
- time clock operated signal bell - work lamp

321
Chain Sling
- two 13' lengths of 1/2" chain with hooks

322
Heavy Duty Appliance Cart
- missing roller belt

322
Cermaic Fiber
- 8 boxes - Cerablanket - 1" 7 2" thick - 2" x 150' length - 1" x 300' length - mix of the two sizes

323
Hobart Wire Feeder
- new in box - Hobart model 2210 wire feeder - with gauge & hose as pictured - semi-automatic solid-state control wire feeder - includes mounting basket

324
Pipe Cutter
- Aireo Minigraph pipe cutter - 3 size of pipe bevelling machine co. saddles, approx. 9", 14" & 22"

325
Torches For the Welder
- burner torches - cutting torch - heating torch - as pictured

326
Lincoln Electric Wire Feeder
- model LN-25 - includes welding gun - unit untested

327
No. 10 Radiograph by Airco
- torch cutting, track - untested

328
Water Cooler & Friends
- stainless steel tank, 16 1/2" x 11" x 21 1/2" - 2 winches - mounting bracket - pump untested, plug cut off cord

329
A Lot Storage
- approx. 100 bins of assorted sizes & colours - as pictured

330
Pipe Wrenches
- 18" aluminum Snap-On - Ridgid approx. 14", note missing end

331
More Pipe Wrenches
- Jet 18" & 24" - heavy duty AL, 36", broken end

332
Vice Grip Locking Clamps
- 6 pair - clamps have been customized as pictured

333
Vise Grip Locking Clamps II
- 6 pairs - 3 pairs missing springs

334
Vise Grip Locking Clamps III
- 6 pairs - 3 pairs missing springs

335
Vise Grip Locking Clamps IV
- 5 pair, 1 missing spring - 4 punch set, 1/2" & three 5/8"

336
Bar & Sockets
- 3/4" drive Gray bar - 2 1/16", 2", 1 13/16", 1 1/16", 1 5/8" Gray sockets - 1 1/2" socket

337
Large Wrenches
- Gray two 1 1/2", 15/16" - 1 5/8", 1 7/16" - 5 pc. in total

338
Impact Tool
- 1/2" drive Ingersoll Rand impact tool - 23 primarily impact sockets 7/16" to 1 1/2"

339
Charger & Drive
- Terminator intelligent battery charger - 4, 12 & 24 amp multi-stage - complete set Gray Tools screwdrivers

340
Tube Benders
- 2 units - Imperial Eastman 3/4" OD, 3R - Imperial Eastman 5/8" OD, 2 1/4" R, small chip

341
Tube Benders
- Ridgid 1/4" OD, 5/8" radius - Super EGO-Spain 1/4" OD, 3/4" radius - Super EGO-Spain 3/8" OD, 1 1/8" radius - Super EGO-Spain, 1/2" OD, 1 11/16" radius

342
Sockets & Ratchets
- primarily 3/8" drive - approx. 50 sockets, assorted brands - 1/2" Gray sockets & Mastercraft 3/8"

343
Toolbox & Contents
- steel box 8 1/2' x 20" x 20" - pipe clamp ends - eye bolts - nozzle tips

344
C Clamps
- three 6" - one 5" - two 7"

345
Combination Wrenches
- variety of brands, 14 in all - five 7/8" - three 15/16" - two 1" - two 1 1/16" - one 1 1/8" - one 1 1/4"

346
More Wrenches
- 7 metric, 7mm to 14mm - 9 combination wrenches, 5/16" to 3/4" - two 3/4" multi-great ratcheting combination wrenches - 3 box end wrenches

347
Drill Bits & More
- 5 containers of drill bits - 15" adjustable wrench - level, screwdrivers, allen keys, snips

348
Angle Grinders
- Walter with wire cup - Metabo - both tested & working

349
More Angle Grinders
- Metabo, model W23-180, 15 amp - Hitachi 7" disc grinder - both tested & working

350
Another Pair of Angle Grinders
- both by Metabo - tested & working

351
Yet Another Pair of Angle Grinders
- Walter Super 5, 30 A 150 - Walter 8 amp - both tested & working

352
Keep On Grinding
- Walter Super 5 30A 150 - Metabo - both tested & working

353
The Last Grinder & Pals
- Metabo grinder - Craftsman saber saw - Walter drill, missing chuck - all tested & working

354
Spring Clamps
- 7 large & 4 medium spring clamps - 1 Bessey quick release F clamp

355
Bessey Clamps
- 4 Bessy ratchet clamps - two 8" - one 10" - one 12"

356
Hammer It
- 10 hammes - mallets, ball peen, claw hammers - includes brass headed hammer

357
Sledge Hammers
- fiberglass handles - 2 hammers, 8 lbs. - experienced but in good condition

358
Smooth & Level
- 4' level, missing one lens - two 2' levels, all lenses intact - 4 files - pry bars - magnetic pick up - & more

359
Bessey & Good Hands Plus
- clamps for the job - 6" Bessey C clamp, heavy duty - Good Hand and Good Hand-like clamp

360
Fein Angle Grinder
- 7" - tested & working

361
Welding Supplies
- inert gas regulator, Victor - whips - torch head - see photos

362
Ridgid Pipe Stands
- 2 - model VJ99 - 28" - 53" adjustment - 12" capacity

363
Ridgid Pipestands
- 2 - model VJ99 - 28" - 53" adjustment - 12" capacity

364
Work/Support Stands
- tripod base - 2 heads for each, pipe stand & flat stand - adjustable height

365
Roller & Pipe Stands
- 3 tripod bases - 3 roller heads - 2 pipe stand heads - adjustable heights

366
Lincoln Electric LN7
- wire feeder - status unknown

367
Miller S-22A
- constant speed wire feeder - status unknown - with Lincoln Electric CO2 regulator

368
Gauges & Fittings
- Winters gauges, 4 1/2" dial 1/2" NPT, both new in box - fittings, new & experienced, 90º, couplers & more, brass & stainless

369
Toolboxes & Contents
- metal fabricated tote 16"l - Rubbermaid toolbox with tray 20"l, missing one latch - includes hex keys, screwdrivers, pliers, hacksaw, ball peen hammer, handheld propane torch

370
Projects To Finish
- and the paint to finish it with - 4 wrought iron table legs - 2 pc. of decorative iron work - includes partial containers paint & other fluid - Torcan mini heater also included

371
Bench Grinder & Stand
- King 8" bench grinder, tested & working - welded angle iron & plate stand 24 1/2" x 12 1/2" x 32", bottom shelf for storage of supplies

372
Bottle Jack Plus
- heavy duty hydraulic jack, tested & working, missing handle - 18" Jet, crescent-type wrench - & more

373
Name Plates
- carbon steel plates, 3 1/2" x 5" x 1" - drilled for ready attachment - approx. 50 - 75 in crate

374
Air Hose & Tools
- Sioux 1/2" impact wrench, model 5000 - Ingersoll Rand ratchet wrench, model 1077XP - both untested - includes hose & blower gun

375
Welding Rods
- partial containers - 85AB OK TIG rod 316L, approx. 8 lbs. - Alcote aluminum rod, approx. 1/2 lb. - Execor, Stellite 3/32", approx. 5 lbs. - Inco Weld 1/16" ER 309L, approx. 8 lbs. - Blueshield Crystal 4043 3/32", aluminum rod - ESAB, Spoolarc 65, 1...

376
Storage Options
- for paperwork & supplies - lateral 4 drawer letter sizes 36" x 19" x 53 1/2" - 2 door metal cabinet 36" x 18" x 65", 5 adjustable shelves - includes contents Argweld inflatable pipe purging systems, 3" to 6" sizes

377
Ridgid Pipe Threader Plus
- 3 way - 1/2" , 3/4" & 1" - model 31-A - 8 Ridgid universal chasers, 4 new in package, 4 experienced, do not fit 31-A

378
Slings & Straps
- various lengths & widths - see photos

379
Cable Slings & Rollers
- 10 wire cable slings, 3/8" & 1/2" woven cable - 2" rollers ten 48 1/2"l, one 27 1/2"l

380
Abrasives
- cut off wheels - sanding wheels - wire cup - flap wheel & more - mostly for 7/8" arbour

381
Power & Light To the Work Site
- extension cords - trouble light - light, medium & heavy duty

382
Protective Clothing & Supplies
- leather welding coats, L & XL - leather gloves - welding helmets, experienced - face shields - bump cap - knee pads - eye protection

383
MIG Welding Spools
- 6 spools, full & 5 partial - various alloys - see photos for details

384
Welding Rods
- partial containers - copper clad cutting electrodes - Unitec C-32, cast 3.25mm - Blueshield 316L 1.6mm - Bonarc - see photos for complete details

385
Portable Pipe Cutting Machine
- Auto-Picle-S - oxyfuel pipe cutter - bevel or straight cut - unit untested

386
Torch Head, Cables & Tips
- Wika gauges - torch head & cables - Tweco contact tips - Tweco nozzles - includes leather welding sleeves

387
Ground Cables
- 3 cables

388
Makita Die Grinder
- tested & working - includes wheels & grinding stones - partial kit, appears to have had limited use

389
Hydrostatic Test Station
- Hydraulic Technology Inc. - # 9901-100 - max inlet psi 90 - outlet psi 10000 - includes Rubbermaid cart - in working order

390
Steel Work Support
- 72"l, 8" x 3" channel - frame 6" x 6" tubing - 32"t - 2 in total

391
Steel Work Supports
- 84"l, 8" x 3" channel - frame 6" x 6" tubing - 32"t - 2 in total

392
Work Station & Stools
- 36 1/2" diam. x 28 1/2"t - 2 metal stools included

393
Slings & Chokers
- approx. 20 - various degrees of experience

394
Fittings & Hardware Plus
- clevises & other fasteners - fittings - bins & tote

395
Work Supports
- 5 supports - two 21" with 4" casters - two 32" with 5" casters - one 49" with 6" casters

396
Pneumatic Tools & Hose
- chisel - Ingersoll Rand impact wrench, 1/2" drive - air wand - untested - air hoses with fittings

397
Power & Light
- trouble lights & extension cords - includes retractable wheel with cord

398
Barrel on Stand
- very small amount of cutting oil left in barrel - 45 gallon barrel - rolling stand

399
HSS Taper Shank Twist Drill
- 6 drill bits - 14" to 17 1/2" lengths - one of each of the following sizes: 2 3/16', 2", 1 25/32", 1 41/64", 1 17/32", 1 1/2"

400
HSS Taper Shank Twist Drills
- 1 1/4" to 33/64"' - 21 in total

401
Reamers & Drill Bits
- HSS round shank drill bits - selection of taps also included - 50 plus pieces

402
Chucks & Hole Saws
- 3 morse taper chucks - selection of hole saws - includes cabinet shown

403
Heavy Duty Pedestal Fan
- Air King by Lasko - 30" blade, adjustable height - working

404
Mach 30 Pedestal Fan
- Marley Industrial Products - heavy duty, in working order - 30" blade, adjustable height

405

406
Electrode Stabilizer Ovens
- Dry Rod, 300ºF avg. - Gullco, model 10B, single phase, 100-400º - status unknown

407
Ridgid Clean
- professional grade wet dry vacuum - model WD19500 - 2 1/2" OD hose missing, includes wands & brush - 16 gallon, 6.5 peak hp - tested & working

408
Vise Grip Locking Clamps
- 4 pair 11SP - 2 pair are missing springs

409
Vise Grip Locking Clamps
- 5 pair 11SP - 2 pair are missing springs

410
Bessey Locking Clamps
- 3 pair - GRM & GRZ V - all with springs

411
Vise Grips Locking Clamps
- 2 pairs - 18SP & 18R

412
Bessey Clamps
- Classix with heavy duty pad - heavy duty - 5 in total - 12" - one pad missing

413
Bessey Clamps
- Classix style with heavy duty pad - 5 in total - 12"

414
Heavy Duty Clamps
- 5 in total - includes one Bessey 8 1/2" - three 8" C clamps - one 10" C clamp

415
Bessey Clamps
- 5 in total - ratchet style - 9 1/2" to 12 1/2"

416
Heavy Duty Clamps
- includes 2 Bessey, ratchet style, 20" - includes 2 Bessey Classix, 14" & 20" - includes one bar style clamp - 5 in total

417
Bessey Clamp
- 4 Classix style - 20 1/2"

418
Bessey Clamps
- 2 F clamps - 1250 x 174 - STB125M

419
Bessey Clamps
- 2 F clamps - STB100

420
Bessey Welding Clamps
- welding angle clamp - WSM 12 plus second smaller - 2 clamps

421
Lever Blocks
- 2 in total - 3/4 ton lever block Kito Corp. Model L4 - smaller is 3/4 tin, larger is unlabelled

422
Transfer Punches
- 57 in total - ranging in size from 7 /64" to 1" - missing 4 from sets

423
Mobile Clamp Rack
- 50" x 28" x 69" - mesh shelf & base - 5" casters, 2 fixed, 2 swivel

424
Rockwell Grinder
- model 7 - wired 550 - three phase - 1/2 hp, 3400 rpm - on stand - tested & working

425
Kant Twist Clamps Plus
- 2 Kant Twist clamps, 6" - one pipe clamp, 79", 1" pipe

426
Heavy Duty Workbench
- 2" plate top - 85 1/2" x 30" x 28" (to top of work surface) with 24" upright right angle jig, 1 1/2" steel with 1 1/4" buttresses - with heavy duty drawer

427
Welder's Assortment
- burner head, new or rebuilt - flashback arresters - lines, clamps, regulator, gloves & more

428
Soothing Sound While You Work
- Pioneer mini stereo with speakers, receiver, dual tape deck, 3 CD changer - Panasonic mini stereo with speakers, receiver, dual tape deck, 5 CD changer - General Electric boom box

429
Heavy Duty Work Stands
- square tube construction - 23" x 22" x 42" - 34" x 24" x 28 1/2"

430
Workshop Needs
- metal cabinet 36" x 28" x 72', adjustable shelves, double door, contents included - handy carts to lend a helping hand: 2 wheeled dolly, torch or tank cart

431
Vises
- bench vise mounted on 1 1/2" x 1 1/2" tube - pipe vise

432
8' Fiberglass Ladder
- Industrial Lite - legs look good, no cracks noted

433
Tiger Torch
- with regulator & hose - tank NOT included

434
Lifting Clamps
- 2 clamps - see photos for design/style

435
Slings & Chokers
- lift straps - various lengths, widths & styles

436
Push Snow With Your Forklift?
- 37" reach - plate 45 1/2" x 21" - 30" centre to centre

437
Clevis & Eye Bolts
- 15 clevis various sizes - 7 eye bolts - as pictured

438
Chains
- both approx. 13'l - 3/8" links & 5/16" links - both with grab hooks

439
Chain Chokers/Slings
- lift your load safely - 3 in total, single & 2 double **To be picked up on the last day of pick up at the end of pick up**

440
Slings & Chokers
- lifting aids - various widths, lengths & styles

441
Liftmaster
- Professional by Chamberlain - garage door opener - appears to be working

442
Vintage Double Pedestal Desk
- metal desk, possibly fireproof - The General Fireproofing Company - included fluorescent light fixture, 48" - 60" x 34" x 30 1/2" **Extremely heavy! Bring help to move**

443
Welding Screens
- AGO Industries - approx. 51" & 70"w x 71"t - third screen 76"w x 81"t

443
Shop Time
- Lincoln Electric clock - quartz movement - 15" diam. - working but piece missing from rim

444
Metal Saw Horses
- 7" channel tops - 48"l x 32"h - guaranteed not to blow over

445
Collectible & Safety Security
- vintage Bailey No. 5 plane - warehouse caution signs - Emergi-Lite, untested - ball mount, end to go in receiver broken - ratchet straps

446
Hytrol 4A
- high ratio gear reducer gearbox - 20:1 ratio - turns

447
Lifting Help
- bottle & car jacks - 2 hydraulic bottle jacks - 8 ton jack works but need oil - larger jack works - includes scissor jack shown

448
Bessey Pair
- GRA 100 clamps - 1000 x 100

449
Bessey Trio
- GRA 30 clamps - 300 x 100

450
Magnum Cooler
- model 10 - with heat exchanger - status unknown

451
Pry, Hold & Level
- bench vise, 4" - load binder - Mastercraft 48" level - pry bar - includes diaphragm pump shown, status unknown

452
Fasteners, Hardware Plus
- nozzles - bolts - assorted fittings & caps - & much more *Bring your boxes to pack*

453
Work & Storage Space
- work bench 68" x 35" x 32" - tubular & angle iron construction - plate top 5/16" thick - welded construction shelving unit 78" x 42" x 73" - items under & on sold separately

454
MIG Welder
- Cobramatic - requires power source - status unknown

455
Redi Racking
- 4 columns approx. 17'h - 18 beams approx. 12'l - approx. 58 cross members

456
Lift & Carry
- Lift-Rite pump cart, fork 7"w x 48"l - dolly/cart with handle, base 26" x 16 1/2" x 6", swivel wheels on one end

457
Fiberglass Step Ladder
- Davidson 6' - adjustable legs - Type II commercial - legs are good, no cracks

458
Crate Lot
- carbon steel - flanges - connectors - caps, tees - elbows - reducers - assorted sizes - lots of weight here - 72" x 28 1/2" x 22 1/2"

459
Crate Lot # 2
- stainless steel - flanges - tees, elbows - connectors - caps - approx. half full - 46 1/2" x 25" x 28"

460
Chimney Liners
- carbon steel - 4 pcs., 1/4" thickness - approx. 59"t x 38 1/4" diam. - tacked at seam

461
Chimney Liners
- carbon steel - 4 pcs., 1/4" thickness - approx. 38 1/4" diam. x 47 1/2"t - 3 of 4 tacked at seam

461
Steel Rings
- 3 rings - 43 1/4" x 36 1/2" x 1/4" - 43" x 36 1/2" x 1/4" - 38 1/2" x 14' x 1/4" - all seams are tacked

462
Chimeny Liners
- carbon steel - 5 pcs., tacked at seams - 4, 1/4" thickness, 28" diam. x 36 1/2"t, 28" diam. x 36 1/2"t, 26 1/4" diam. x 24"t, 20" diam. x 28 1/4"t - 1, 3/8" thickness, 24" diam. x 19 3/4"t

463
Chimney Liners
- 2 pcs. - carbon steel 72"t x 38 1/2" diam. x 1/4" thickness - schedule 40 74"t x 20" diam. x 3/8" thickness

464
Carbon Steel Rings
- perfect fire rings - 3 pcs., 1/4" thickness - all approx. 38 1/2" diam. x 8"t - one of three has tacked seam

465
Welding Rotator/Positioner
- with foot control & speed control - 9" diam. chuck - does not respond to power, status unknown, as found - brand & model unknown

466
I Beam, Carbon Steel
- one 4" x 8" x 10', 1/4" thickness - two 8" x 8" x 13 1/2', 7/16" thickness - four 8" x 8" x 8 1/2', 5/16" thickness - six 6 1/2" x 8" x 9'l, 5/16" thickness

467
Carbon Steel Plate
- 4 sheets, 1/4" x 5' x 10' - 1 pc. 1/4" x 15 1/2" x 64" - 1 pc. 1/4" x 14" x 75" - 1 pc. 1/4" x 56" x 56" - 2 pcs. 3/8" x 64" diam. - 1 pc. 1/4" x 24" x 96" - 1 pc. 1/4" x 8" x 57" - 1 pc. 1/4" x 87" x 39" - 1 pc. 1/4" x 33" x 70" - 1 pc. 3/8" x 25"...

468
Stainless Plate
- 4 sheets - one 1/4" x 42" x 96" - one 1/4" x 48" x 96" - two 1/4" x 52 3/4" x 96" - 2 additional pieces, 1/4" x 31" x 36" & 3/16" x 38" x 29 1/2" - approx. 1600 lbs.

469
Carbon Steel Square Tubing
- 3 pcs. - 6" x 6" x 3/8" x 24' - Grd CSA G40.21-13 50W Class C - approx. 2000 lbs.

470
Carbon Steel Square Tubing
- 5 pcs. - two 5" x 5" x 9 1/6" x 24' - three 3" x 3" x 1/2" x 24' - approx. 2350 lbs.

471
Carbon Steel Square Tubing & Channel
- 6 pcs. - tubing, two 3" x 3" x 3/16" x12' - channel, four 1 1/2" x 3" x 3/16", two 12' , two 10' - approx. 400 lbs.

472
Square Tubing, Carbon Steel
- 6 pcs. - two 6" x 6" x 7/16" x 24' - one 5" x 5" x 1/4" x 24' - two 3 1/2" x 3 1/2" x 1/4" x 24' - one 3" x 3" x 1/8" x 24' - includes 4 shorter pieces, 5" x 3" x 5/16" 7' - approx. 3000 lbs.

473
Expanded Metal Grating
- stainless steel - 16 pieces, 18" x 48" - 1/16" thickness - 1/2" opening

474
Work Station
- metal work surface with 4" backsplash - 97 1/2" x 36" x 40" - wooden frame & lower shelf - 4" x 4" pressure treated legs & 2" x 4" construction

475
Acetylene Tanks
- two tanks, 19" tall - with torch heads, hose & gauges - as found

476
Aluminum Cladding
- some cut, some full sheets - 4" - 48" width - 4' to 9' lengths - various profiles

477
I Beams
- 5 pieces - height 4 1/2', Flange 4" - 5/16" web, 3 pieces, 23', 8', 8' lengths - 1/4" web, 2 pieces, 8' & 7' lengths - approx. weight: 500 lbs.

478
Carbon Steel Tubing
- 4 pieces - 5 x 5 x 1/4, 10' - 8 x 8 x 3/8, 11.25' - 6 x 4 x 1/4, 17' - 4 x 4 x 1/4, 21.75' - approx. weight: 1110 lbs.

479
Carbon Steel Tubing
- 6 pieces - 3 x 3 x 3/8, approx. 27' long - 5 pieces 3 x 3 x 5/16", 27' each - approx. weight: 1700 lbs.

480
Carbon Steel Tubing
- 12 pieces - 8 pieces, 1 x 3 x 3/16", approx. 27.5' long - 2 pieces, 4 x 3 x 1/4", approx. 27.5' long - 1 piece, 2 x 4 x 3/16", approx. 27.5' long - 1 piece, 5 x 3 x 5/16", approx. 17' long - approx. weight: 1550 lbs.

481
Carbon Steel Mixture
- angle iron, I beam, channel & tubing - angle iron, 5 pieces, 4 x 4 x 1/2", approx. 23' long - angle iron, 4 pieces, 8 x 4 x 1/2", approx. 9' long - angle iron, 1 piece, 5 1/2 x 4 x 7/16", approx. 11.5' long - angle iron, 1 piece, 5 x 5 x 5/8", appr...

482
Aluminum & Carbon Mixture
- Ibeam, channel, angle iron and more - aluminum Ibeam, 3 pieces, 6 x 3 1/2 x 5/16", 4.5' to 7.5' long - aluminum channel, 8 pieces, 6 x 3 1/2 x 5/16", 2' to 4 1/2' long - and other pieces - carbon steel angle iron, 7 pieces - painted bar, 2 pieces,...

483
A 36 Carbon Steel
- angle iron & more - angle iron, 10 pieces, 3 x 4 x 1/4", approx. 20' each - angle iron, 1 piece, 3 x 4 x 1/4", approx. 16' each - angle iron, 1 piece, 3 x 4 x 5/16", approx. 13.5' each - angle iron, 7 pieces, 3 x 3 x 1/4", approx. 5.5' long each - ...

484
A 36 Carbon Steel
- angle iron - 19 pieces, 3 x 2 x 1/4", approx. 20' each - 1 piece, 3 x 2 x 1/4", approx. 16' - 1 piece, 3 x 2 x 1/4", approx. 9' - 3 pieces, 2 x 2 x 3/16", approx. 20' - 4 pieces, 2 1/2 x 2 x 1/4", approx. 19' - 2 pieces, 3 x 2 x 1/4", approx. 20' -...

485
A 36 Carbon Steel
- angle iron - 18 pieces, 2 1/2 x 2 1/2 x 3/16", approx. 20' - 3 pieces, 2 1/2 x 2 1/2 x 1/4", approx. 20' - 2 pieces, 3 x 4 x 1/2", approx. 10' - 2 pieces, 2 x 3 x 1/4", approx. 20' - 2 pieces, 2 x 2 1/2 x 3/16", approx. 20' - 4 pieces, 3 x 3 x 3/6"...

486
A 36 Carbon Steel
- angle iron - 4 x 4 x 1/2", 1 piece @ 14.5' - 5 x 3 x 1/2", 1 piece @ 14.5' - 3 1/2 x 3 x 1/2", 1 piece @ 8' - 3 x 2 x 1/2", 3 pieces @ 20' - 3 x 3 x 1/2", 2 pieces @ 20' - 5 x 2 1/2 x 3/8", 1 piece @ 16' - 2 x 3 x 1/2", 1 piece @ 9.5' - 3 x 4 x 1/4...

487
A 36 Carbon Steel
- Bar - 4 x 3/8", 1 piece @ 10' - 4 x 1/4", 1 piece @ 6' - 6 x 1/2", 1 piece @ 15' - 5 x 1/8", 1 piece @ 8' - 3 1/2 x 1/2", 2 pieces @ 20' - 3 x 3/8", 1 piece; @ 19' - 4 x 3/16", 2 pieces @ 20' - 4 x 1/8", 1 piece @ 20' - 6 x 5/16", 1 piece @ 20' - p...

488
A 36 Carbon Steel
- tubing pipe and channel Tubing - 2 x 2 x 1/4", 4 pieces @ 24' - 5 x 2 x 1/8", 2 pieces @ 24' - 2 x 3 x 1/4", 1 pieces @ 24' - 2 x 3 x 3/16", 1 pieces @ 24' - 1 x 1 x 1/8", 5 pieces @ 24' - 3 x 3 x 5/16", 1 piece @ 23' - 2 x 3 x 3/16", 1 piece @ 24'...

489
A 36 Carbon Steel
- tubing & channel Tubing - 4 x 2 x 1/8", 2 pieces @ 18', 1 piece @ 15', 2 pieces @ 14' - 1 1/4 x 1 1/4 x 3/16", 1 piece @ 24' - 2 x 3 x 1/4", 1 piece @ 22' - 2 1/2 x 2 1/2 x 1/4, 1 piece @ 18' - 2 x 2 x 1/4", 1 piece @ 22', 1 piece @ 10' - 1 x 2 x 1...

490
A 36 Carbon Steel
- tubing & channel Tubing - 2 x 2 x 3/16", 4 pieces @ 24' - 1 1/4 x 1 1/4 x 1/8", 4 pieces @ 24' - 1 x 1 x 1/8", 4 pieces @ 24' - 1 x 3 x 1/4", 1 piece @ 24' - 2 x 2 x 1/4", 3 pieces @ 24' - 2 x 1 x 1/8", 1 piece @ 24', 1 piece @ 10' - 3 x 3 x 5/16",...

491
A 36 Carbon Steel
- 4 shelves - mixture tube, channel, bar and pipe - lengths up to 24' - approx. 25-33% the total weight of previous 8 lots

492
A 36 Carbon Steel
- pipe - 1/2" to 4 1/2" diameter - 1/8" to 1/4" wall thickness - lengths up to 20' - approx. 25 pieces

493
A 36 Carbon Steel
- pipe - 3/4" to 4 1/2" diameter - 1/8" to 1/4' wall thickness - lengthsup to 20' - approx. 15 pieces - includes one piece 2 1/2" diameter, 6 1/2' long

494
A 36 Carbon Steel
- tube, channel & pipe Tube - 3 x 2 x 1/8", 1 piece @ 28' - 3 x 1 1/2 x 3/16", 3 pieces @ 28' - 4 x 4 x 1/8", 1 piece @ 8' - 2 x 2 x 3/16", 1 piece @ 20' - 3 x 3 x 5/16", 1 piece @ 10' Channel - 3 1/2 x 8 x 1/2", 2 pieces @ 20' Angle - 6 x 6 x 1/2", ...

495
A 36 Carbon Steel
- angle iron, channel, tubing, I beam - lengths up to 20' - 1/4 to 5/8" thickness - see photos for details

496
A 36 Carbon Steel
- tube, channel & angle iron Tube - 2 1/2 x 2 1/2 x 3/16", 1 piece @ 22' - 2 x 2 x 3/16",1 piece @ 19' - 4 x 4 x 5/16", 1 piece @ 21' - 2 x 3 x 3/16", 1 piece @ 11' - 3 x 3 x 1/4", 1 piece @ 10' - 4 x 4 x 5/16", 1 piece @ 10' - 2 x 2 x 5/16", 1 piece...

497
Stainless Steel
- tube, bar, angle & channel Tube - 6 x 6 x 1/4", 1 piece @ 13.5' - 6 x 2 x 1/4", 1 piece @ 7' - 6 x 2 x 1/4", 1 piece @ 4.75' - 2 x 1 x 1/8", 1 piece @ 9.75' - 1 x 1 x 1/8", 1 piece @ 23' - 2 x 1 x 1/8", 1 piece @ 10' - 2 1/2 x 2 1/2 x 3/16", 1 piec...

498
Stainless Steel
- tube, bar and angle Bar - 4 x 3/16", 1 piece @ 11.5' - 2 x 7/16", 1 piece @ 12' - 1 1/2 x 1/8", 3 pieces @ 12' - 1 1/2 x 3/16", 1 piece @ 12' - 1 x 3/8", 1 piece @ 6' - 1 1/2 x 7/16, 1 piece @ 6.5' - 1 x 1/4", 1 piece @ 10' - 1 x 3/16", 3 pieces @ ...

499
Stainless Steel
- angle, tube, bar & channel Angle - 2 x 2 x 3/16", 1 piece @ 21' - 1 1/2 x 1 1/2 x 1/8", 3 pieces @ 8 1/2', 20' & 20' - 2 1/2 x 2 1/2 x 5/16", 1 piece @ 8' - 2 1/2 x 2 1/2 x 1/4", 1 piece @ 18' - 2 x 2 x 3/16", 1 piece @ 20' - 4 x 3 x 5/16", 1 piece...

500
Stainless Steel & Carbon Steel Mixture
Carbon Steel - channel, 12 x 3 x 5/16", 1 piece @ 9' - tube, 6 x 4 x 1/4", 1 piece @ 10' - tube, 1 1/2 x 3 x 1/8", 1 piece @ 24' - tube, 5 x 5 x 5/16", 2 pieces @ 24' and 12' Stainless Steel - tube, 4 x 4 x 3/16", 1 piece @ 9 1/2' - channel, 10 x 2 1...

501
Mixture of Stainless, Carbon & Copper
Stainless - angle, 2 1/2 x 2 1/2 x 1/16", 2 pieces @ 10' - tube, 3/8", 1/8" wall, 50 linear feet - pipe, 1" diameter, 1/8" wall, 1 piece @ 8 1/2' - 2" diameter, 1/16" wall, 1 piece @ 10' - 2" diameter, 1/8" wall, 1 piece @ 19' - 1 1/4" diameter, 1/8"...

502
Crib & Contents
- sheet metal, expanded metal, checker plate, wire mesh - stainless & carbon Stainless Wire Mesh, 5'10" x 4', sheet 4'x 8' x 3/16" thickness Carbon Plate - 3' x 5' x 3/16" - 4 1/2' x 4' x 1/2" - 2 1/2' x 5' x 7/16" - 5 1/2' x 4' x 1/2" - 4' x 8' x 1/...

503
Carbon Steel Pipe & Tube
Pipe - 1 1/2" diameter to 8 1/2", up to 24' lengths - 1 1/2" diameter, 3/16" wall, 1 piece @ 24' - 2" diameter, 1/4" wall, 1 piece @ 18' - 2 1/2" diameter, 1/4" wall, 1 piece @ 18' - 3" diameter, 1/4" wall, 1 piece @ 17' - 3" diameter, 1/4" wall, 1 p...

504
Carbon Steel Pipe
- 1/2" to 3 1/2" diameter - lengths up to 21' - thicknesses up to 1/2" - see photos - approx. 50 pieces

505
Stainless Steel Pipe
- 1/4" up to 4" diameter - assorted lengths up to 20' - 40 to 50 pieces

506
Stainless Steel Pipe
- 300 Series - 4 1/2" diameter, 3/16" wall thickness, 3 pieces @ 10.5', 15', 20' - 6 1/2" diameter, 7/16" wall thickness, 2 pieces @ 7' & 9.75' - 8 1/2" diameter, 5/16" wall thickness, 1 piece @ 21' - plus approx. 25 additional pieces of various leng...

507
Stainless Steel Pipe
- 300 Series - primarily Schedule 40 & 80 - up to 20' lengths - 1" to 5 1/2" diameter - 30 pieces plus

508
Tiered Rack Unit
- 16'4" long - 6' wide at base - 4 tiers - contents NOT included - constructed of 3 x 2 tubing - welded steel construction - not to be picked up until end of sale pick up - matches lot 509

509
Tiered Rack Unit
- 16'4" long - 6' wide at base - 4 tiers - contents NOT included - constructed of 3 x 2 tubing - welded steel construction - not to be picked up until end of sale pick up - matches lot 508

510
Double Cantilever Shelving
- 19' long - 9 1/2' tall - 82" wide - 4 columns at 9 1/2' high, 82" at base - 18 arms, 40" long - contents NOT included - to be picked up at end of sale pickup

511
Cantilever Shelving
- 85" long - 11'7" tall - 60" wide - 2 columns at 11'7" high, 60" at base - 8 arms, 52" long - contents NOT included - to be picked up at end of sale - unit currently tacked to building, bring torch or angle grinder

512
Tiered Steel Rack
- 14' long - approx. 63" deep at base - approx. 120" high - welded channel construction - 7 tiers - unit tacked to building, bring torches or angle grinder - to be removed at end of sale - contents NOT included

513
Aluminum Sheets
- partial sheets - 4' - 8'l - 2' - 3'w - 1/4" - 1/8"

514
Aluminum Sheets
- full & partial sheets - all 1/8" thick - two 120" x 60" - two 120" x 48" - 103" x 60" - 103" x 42" - 48" x 34" - 41" x 33" - 54" x 38" - 48" x 45" - 42" x 38" - 48" x 45" - 47" x 48" - 80" x 49" - approx. weight: 650 lbs.

515
Stainless Steel Sheets
- 60" x 54" x 1/8" - 70" x 48" x 1/4" - 64" x 20 1/2" x 1/4" - 53" x 60" - 48" x 120" x 1/4" - approx. 15 pcs. total

516
Aluminum Sheets
- 96" x 48" x 1/4" - 82" x 48" x 3/8" - 25" x 96" x 3/8" - 144" x 60" x 1/8" - 120" x 60" x 3/16" - plus 8-10 smaller pieces approx. 4' - 6'l, 48" - 60"w - approx. weights: 600 lbs.

517
Aluminum Sheet
- 144" x 48" x 3/8" - 1 pc. - with protective wrap - approx. weight: 254 lbs.

518
Carbon Steel Cutoffs & Partial Sheets
- one 120" x 60" x 5/8" - remainder ranges from 1/8" - 1/4" thick - various lengths and widths up to 10'l - large quantity

519
Pipe Assortment
- 126" length of 1 1/4" schedule 160 - low carbon schedule 80 - approx. 28 pcs. in total, 2 1/2' to 11' lengths - assortment as pictured

520
Counterbalance Weight
- approx. 13" x 13" x 10" - total height to top - guaranteed to keep your canoe from drifting

521
Hardware Assortment
- full thread stud 7/8 - 9 x 5 3/4" approx. 125 pcs. - nuts to fit studs - 5/8" x 4 1/2" zinc plate bolts - 3/4" x 3" zinc plate bolts - quantity of large washers - roofing screws - & more

522
Large Workbench
- approx. 199"l x 36"d x 40"h - 4" backsplash on back and one end - metal top, approx. 1/16" thick *Some disassembly may be necessary to move*

523
Time Clock System
- Simplex 100 with user guide, time card rack & buzzer - system in working order **Purchaser to remove from wall**

524
Fire Rings
- three 32" diam. x 8 1/4" x 3/16" - 32" diam. x 12" x 3/16"

525
Jobsite Box
- 36" x 25 1/2" x 21" plus handles - can be locked - steel construction

526
RC Cola Cooler/Dispenser
- 35" x 28" x 80" - set up for 8 varieties - will accept dollar coins - functional status unknown, as found

527
Generator
- Aztec generator, Tecumseh engine - 7250 max. surge output - three 120v outlets - one 240v outlet - unit has good compression, functional status unknown

528
Pallet Forks
- 4" x 48"

529
Tarps
- load tarps, fuel cans & tub - large heavy duty load tarp - light duty small poly tarp - plastic tub - 2 fuel cans

530
Welder & Cooler
- Millermatic welder style JK-33 - cooler with Procon pump - units as found, functional status unknown

531
Pipe
- Shedale 40, 10" diam. x 60" stainless pipe - 3 fabricated pieces - approx. 15 1/2" diam. x 18"

532
Port-A-Spot Welder
- by Control Systems, Windsor Ont. - unit as found, functional status unknown

533
MIG Wire Feed & Cooling Pump
- Linde WC-5 cooling pump - Linde MIG-35 wire feeder - fire extinguisher, welding hose & torch tip - all as found, functional status unknown

534
Rotator
- foot control - MSC speed control - unit as found, functional status unknown

535
Aluminum Stock - Extruded T65
- angle 6" x 4", 4" x 4", 2 1/2" x 2", 3" x 2 1/2" - approx. 16 pc. are 20 plus some shorter ones - primarily 1/4" & 3/8" thickness - bar & tube stock, 8' to 20' lengths - 6 pcs. are 20', 6 pcs. are shorter

536
Sea Container
- approx. 30'l x 8'w x 8 1/2"t - aluminum, hinged, flip out ramp with counterweights - contents NOT included

537
Steel Work Table
- 88" x 57" x 32" - 5/8" work surface - lower storage shelf

538
Steel Storage Bins
- pair of steel storage boxes - wire mesh & tubular steel, 2 drop down sides, 40" x 35" x 32" - welded steel, 41" x 29 1/2" x 29 1/2"

539
Steel & Racks
- tubing, channel, angle, pipe, I beam - largest pipe 20" diam. x 19' x 3/8" thickness - second pipe 14" diam. x approx. 12' x 3/8" wall thickness - 12" I beam, approx. 8'l - bar stock 2 1/2", 3 1/2", 4 1/2"w, 1/2" to 1" thickness, various lengths - ...

540
Metal Cutoff Saw
- with vise & roller feed - approx. 14" blade - 1725 rpm, 3hp - untested, power cord cut off - included wooden trolley, solid rubber swivel casters

541
Aluminum Pieces
- 1 pc - 5' x 6' x 5/8" aluminum - 5 pcs - 5' x 5' 8" x 3/8" Aluminum - 1 pc - 6'-2 x 25" x 1/8 Aluminum - 1 pc 4' x 40" x 1/8 Aluminum - 1 pc 49" x 22" x 1/8 Aluminum - 1 pc 4' x 34" x 1/8 Aluminum

543
Aluminum
- 1 pc - 5' x 6' x 5/8" aluminum - 5 pcs - 5' x 5' 8" x 3/8" Aluminum - 1 pc - 6'-2 x 25" x 1/8 Aluminum - 1 pc 4' x 40" x 1/8 Aluminum - 1 Pc 49" x 22" x 1/8 Aluminum - 1 pc 4' x 34" x 1/8 Aluminum

542
Hitachi Cordless Hammermill Dril
- model DV 18DL - comes with three chargers for batteries - tested and working

543
2 Steel Shelving Units
- approx. 6' x 6' x 24" - very structurally strong - contents on shelves not included to be picked up late Tuesday