THIS IS A COMPLETED SALE
View current listings by this company
View current listings by this company
Ham Radio & More, Summer 2018 Auction
Previous Page Listing ID#: 81066
Auction Location |
---|
Kansas City, MO 64118 |
Auction Dates and Times |
---|
Bidding Starts: Thursday Jul 19 Bidding Ends: Thursday Aug 2 |
Auction Type |
---|
Online Auction VIEW ONLINE CATALOG |
Company Information |
---|
Schulman Auction & Realty, LLC Website: www.schulmanauction.com GoToAuction.com ID#: 1811 View company information and listings |
Free Email Notifications
Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.
Listing Terms and Conditions |
---|
TERMS AND CONDITIONS
ONLINE ONLY AUCTION!
These are the Terms and Conditions of Sale for this online auction.
They consist of this introduction and 27 (twenty-seven) numbered paragraphs and subparagraphs that outline the relationship between you ("the Bidder") and Schulman Auction & Realty, LLC, ("the Auctioneer"). Throughout these Terms and Conditions, the terms "auctioneer," "we," "us," and "our" will refer to the Auctioneer, and the terms "you" and "your" will refer to the Bidder.
If you want to bid in this online auction, you will first have to read these Terms and Conditions. And by placing a bid, you agree that you have read the Terms and Conditions and understand the terms are binding on both you and on the Auctioneer, and all parties will be expected to abide by the Terms and Conditions if any issues arise in connection with this sale.
Please read these Terms and Conditions carefully! They contain important information about the online auction itself and your rights and responsibilities as a bidder.
1. Registration: To gain access to this online auction, you will need to register and obtain a bidder number. You must be eighteen years old or older to register. You agree that all information that you provide during the registration process will be true and accurate. You will be banned from participation in the Auctioneer's auctions indefinitely should you provide any false information during the registration process.
2. Credit Card: In order to register for this auction, you will need a working Visa, MasterCard, Discover, or American Express card associated with your account. This card will be automatically charged at the end of the auction, if you are a winning bidder. NOTE: If this is your first time registering for one of our auctions with a credit card, your card may be temporarily charged a small fee of $1 or less for authentication purposes. This charge WILL be REMOVED after your card is successfully authenticated. None of your credit card information is stored with the auctioneer.
3. Bidder's Duty to Update Information: Whether you are a new or returning bidder, you agree that if any of the information associated with your bidder number - including contact information and credit card information - changes at any time prior to, during, or after this sale, you will notify the Auctioneer of the change by updating your bidder profile.
4. Conduct of Sale: All bids, and credits in this sale will be made in United States Dollars (USD). You agree not to use any hardware, software, program, or system that would interfere with the orderly conduct of this sale. You further agree not to copy, reproduce, or publically display any content from the Auctioneer's website without first obtaining written permission from the Auctioneer.
5. Bidder's Duty to Inspect and Investigate: You acknowledge that the Auctioneer is providing you with the opportunity to inspect the items being offered for sale in this auction. The Auctioneer strongly encourages you to attend the scheduled inspection for this auction. If you choose not to attend the scheduled inspection and are in doubt about the condition, completeness or suitability of a given item, please bid accordingly.
a. Photographs and Descriptions: The Auctioneer regularly posts item descriptions and photographs to aid bidders in the bidding process, and we make every effort to ensure that the descriptions and photographs that we post accurately represent the items being offered for sale. In some photographs, multiple items may appear to be joined as a single unit, however you should not assume that a lot consists of more than one item simply because various items appear connected or are featured in the same photograph. Also understand that, on occasion, the wrong photograph may be displayed for a given item. At all times, you are bidding on items as they are described on this website, not as they appear in any photograph.
b. Bid Wisely: We want everyone to be pleased with their purchases and most will. However, when you bid on the wrong item or decide an item is not suited for your intended use, our clients will not assume the cost of your mistakes. You agree that your failure to inspect or otherwise become fully informed about the items offered for sale in this auction will not be grounds for a refusal to pay amounts due to the Auctioneer nor for any claim against the Auctioneer.
6. WARRANTY AND CONDITION OF ITEMS SOLD: ALL LOTS AND ITEMS ARE SOLD AS IS, WHERE IS, WITH ALL FAULTS, AND WITH NO EXPRESS OR IMPLIED WARRANTIES. NO ACTION TAKEN BY THE AUCTIONEER OR ITS AGENTS IS INTENDED TO CREATE ANY EXPRESS OR IMPLIED WARRANY AS TO ANY LOT OR ITEM IN THIS SALE. THE AUCTIONEER SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE, CONFORMITY WITH ENVIRONMENTAL LAWS OR REQUIREMENTS, NON-INFRINGEMENT, ACCURACY, TITLE, OR ANY OTHER WARRANTY. IT IS BELIEVED THAT ALL DESCRIPTIONS ARE ACCURATE. DESCRIPTIONS ARE NOT GUARAUNTEED.
7. When You Have Been Outbid: If you are outbid during the course of this auction, you will be notified by email, if you have chosen this option when you registered. You can see if you are high bidder at any time using the "Watch List" feature; items which you have put on the Watch List will show the bidder name of the high bidder.
8. Reporting Bidding Errors: You should carefully review every bid you choose to make before submitting that bid. The Auctioneer will not automatically assume that any bid, even a bid that increases your own lower bid, was made in error. If you mistakenly increase your own bid at any time during the auction, or make some other bidding error (e.g. placing your bidder number in the price field), you must immediately contact the Auctioneer by email at david@dschulmanassociates.com. Reports of bidding errors must be made via e-mail; phone reports will not be accommodated.
9. Timeliness of Bidding Error Reports: If you make a bidding error during this auction, you must identify and report the error before the auction begins to close. The Auctioneer will not undo bidding errors reported after the auction has begun to close.
10. Bidder's Duty to Report Fraud: You are responsible for all bids made from your account. If you believe that an unauthorized person has gained access to your account, you must notify the Auctioneer immediately by sending an e-mail to david@dschulmanassociates.com. You must also report the incident to the relevant law enforcement authorities and send the Auctioneer a copy of any resulting police report. You understand and agree that if you do not promptly report any suspected fraud to the Auctioneer and to the relevant law enforcement authorities, you will be held personally responsible for all purchases made using your account and bidder number.
11. Changes in Circumstance: All aspects of this auction are subject to change without notice. The Auctioneer reserves the right to, at any time: (1) add or remove items from the auction, (2) split or combine lots, (3) add minimum bids or reserve prices, (4) cancel, suspend, extend or reschedule the sale of an individual item, lot, auction, and/or auction event, (5) make changes to the auction's closing, inspection, or removal times, or (6) take any other action the Auctioneer deems necessary to effect the fair conduct of this sale or protection of buyers', sellers', or other parties' interests. In the event a seller withdraws an item from this auction prior to the close of the auction, the Auctioneer may leave the item on the catalog and buy the item back on behalf of the seller to establish the Auctioneer's earned commission and the buyer's premium due to the Auctioneer from the seller.
12. Closing: the Auctioneer's online auctions are designed to mimic traditional "live" actions. For this reason, this auction will have a staggered, dynamic closing.
a. Staggered Closing: This online auction will automatically begin to close at a rate of 3 items per minute. Items' closing times may be extended past their scheduled closing time, however, as a result of the Auctioneer's dynamic closing feature.
b. Dynamic Closing: The closing time of an item is automatically extended an additional 3 minutes whenever a bid is placed within the 3 minutes leading up to an item's scheduled closing time.
13. Winning Bids: If you place a bid in this sale, and your bid is determined to be the winning bid, you become obligated to pay for the item(s) that you have won at the price you gave as your bid.
a. Notification: If you end up placing one or more winning bids in this auction, the Auctioneer will contact you by e-mail to let you know which items you have won. This e-mail notification will be the only contact you receive from the Auctioneer about your winning bids; this means that you are responsible for checking your e-mail following the close of the auction to determine what items you have won. If you do not receive an e-mail identifying you as a winning bidder, it is because the Auctioneer has no record of your having placed a winning bid.
b. Bid Inquiries: If you believe that you placed a winning bid, but do not receive an e-mail, you must notify the Auctioneer by sending an e-mail to david@dschulmanassociates.com explaining your situation by 9:00am on the day after of the auction has closed. You agree that the Auctioneer will be the sole authority regarding the identification of winning bids.
14. Payment: At the conclusion of this auction the credit card you used to register for this auction, will automatically be charged for your invoice amount.
a. Chargebacks Prohibited: You agree that you will accept all charges placed on the credit card associated with your account, and you agree that you will not charge back any amount that is charged s to your credit card. You agree that this provision applies equally to amounts charged in connection with any items you have won and any costs or fees discussed in Paragraphs 16-18 of these Terms and Conditions.
15. Buyer's Premium: A 10% buyer's premium is added to every purchase. This means that if your winning bids add up to $100, you will be charged $110 at checkout, plus any applicable sales tax.
16. Default and Resale: You agree that if, after being declared the winning bidder, you fail to pay for any item that you have won for any reason, your account will be declared in default. If you still refuse to pay for any item after being notified of your account's being in default, you agree that the Auctioneer will have the right to immediately resell your item, and you further agree to pay (1) any cost associated with the resale and (2) any deficiency between your original purchase price and the resale price.
17. Picking Up/Shipping Your Items: IF you are picking up your items, you are solely responsible for the safe and timely pick-up and removal of any items you may win at this auction. IF you are having your items SHIPPED due to being located out of the area, see section "a" below. If you are unable to safely pick up and remove your items during the item pick up times that have been scheduled for this sale, PLEASE DO NOT BID. The Auctioneer does not hold items beyond the published removal times. The Auctioneer will not issue you a refund if you are unable to pick up and safely remove your items during the published removal times.
a. SHIPPING: If shipping out of the area is required, we work with a local UPS franchise that will pickup your items the week following the auction. Shipping charges will be billed to you separately, by the shipper. Your name and phone number, along with a copy of your paid invoice and items won, will be given to the shipping company so that they may contact you to arrange shipping and payment.
b. Bidder's Duty to Remove Items Safely: Again, you are solely responsible for the safe pick-up, removal, and transportation of your items. You agree that the pick-up, removal, and transportation of your items will be solely at your expense and at your risk. You further agree that you will be responsible for any damage that you or any of your agents cause during any inspection or removal period, and also agree that the credit card associated with your online account will be charged for any expenses incurred and/or repairs necessary as a result of any damage that you cause.
c. Release Upon Presentation of Receipt: You understand and agree that the Auctioneer will release your items only after you or your agent presents a sales receipt generated by the Auctioneer stating that your account is paid in full. You further understand and agree that it is your duty to ensure that any agent picking up items on your behalf has a copy of your paid sales receipt to present at the pick-up location. You explicitly authorize the Auctioneer to release your items to any person in possession of your paid sales receipt. No item will be released to any person unless that person presents a paid sales receipt listing the item in question.
d. Abandonment: You understand and agree that any item that you do not pick up during the published removal times will be considered abandoned. You understand and agree that you will be charged a reasonable fee for the storage, removal, and/or disposal of any item that is considered abandoned.
18. Disposal of Unclaimed Items: In the event you refuse to pay for or abandon any item that you win at auction, the Auctioneer will have the option of reselling, removing, storing, or disposing of the unpaid or abandoned item. You understand and agree that you will be personally responsible for all deficiencies including all legal, collection, transportation, and storage expenses associated with your delinquent account and/or abandoned items. In the event of resale, you agree to pay any cost associated with the resale as well as any deficiency between your original purchase price and the resale price.
19. Non-Delivery: In the unusual event that an item has been grossly misrepresented or is unavailable for pickup during the published removal times, you must immediately notify the Auctioneer's onsite staff of the problem and file a claim for non-delivery within twenty-four hours. You understand and agree that if you fail to make a claim for non-delivery within twenty-four hours of your discovering the problem, your claim for non-delivery will not be honored. Claims for non-delivery may be filed by replying to the e-mail that informed you of your winning binds. Your claim must fully describe the nature of the problem that you have identified.
20. Claims and Choice of Venue: Any claim or controversy out of or relating to these Terms and Conditions, or to any breach thereof, will be settled either (1) in Clay County, Missouri's Small Claims Court, if the claim in question amounts to less than $5,000, or (2) by means of arbitration in accordance with the Commercial Arbitration Rules of the American Arbitration Association, if the claim in question amounts to more than $5,000. In the event of arbitration, judgments upon the award rendered by the arbitrator may be entered by any court having jurisdiction. You agree that all claims will be litigated or arbitrated on an individual basis, and will not be consolidated with any claim made by another party. Venue in every case will be Clay County, Missouri. You agree that any judgments awarded may be applied to and collected from you personally or corporately. Should any party file an action contrary to this paragraph, the counterparty may recover reasonable legal fees and costs. Further, if you bring a claim against the Auctioneer and do not prevail, you agree that you will reimburse the Auctioneer for all reasonable legal fees and costs.
21. Interim or Preliminary Relief: Notwithstanding the contents of Paragraph 22 of these Terms and Conditions, you agree that the Auctioneer may seek interim or preliminary relief in a court having jurisdiction in order to protect any rights or property that the Auctioneer may have pending arbitration or litigation.
22. Liability: In all cases, the Auctioneer's liability, and the liability of the seller of the items in this auction, will be limited to the refund of your purchase price. The Auctioneer will not be liable for any amount in connection with the postponement or cancellation of this auction, or the withdrawal of any item or lot from this auction. In no event will the Auctioneer be liable for lost profits or any special, incidental, or consequential damages arising out of or in connection with this auction or any related sale or transaction.
a. No Liability for the Acts of Third Parties: The Auctioneer is not responsible for any action taken by any seller, bidder, or other third party before, during, or after this auction.
b. No Liability for Site Malfunction: You understand that this auction is online-only, and so relies on devices and programs that may malfunction without warning. You agree that the Auctioneer will not be liable for any error or inconvenience that may be the result of such a malfunction. You further understand and agree that the Auctioneer may void or suspend any sale, or resell any item, if the Auctioneer determines a transaction to have been affected by any site malfunction.
23. Indemnification: You agree to indemnify, defend, and hold harmless the Auctioneer and its employees, officers, owners, affiliates, agents, and representatives from and against any claims, losses, damages, liabilities, judgments, fees, costs, and expenses, including reasonable legal fees and costs, related to, arising from, or associated with you, your agents or representatives including, but not limited to, personal injury or property damage caused at any sales site or during removal or transportation of items won at auction, any dispute with another bidder, or any violation of these Terms and Conditions.
24. Limitations: These Terms and Conditions do not, nor are they intended to create any agency, partnership, joint venture, employer-employee, or franchisor-franchisee relationship. These Terms and Conditions cannot be altered except in writing by the Auctioneer.
25. Severability: If any term, provision, paragraph, condition, or other portion of this agreement, or the application of these, to any person, place, or circumstance, is held to be invalid, unenforceable, or void, the remainder of this agreement and such term, provision, covenant or condition as applied to other persons, places and circumstances will remain in full force and effect.
26. Governing Law: These Terms and Conditions will be governed by and construed under the laws of the State of Missouri.
27. Entire Agreement: These Terms and Conditions contain our entire agreement and supersede any prior oral or written agreements relating to the same subject matter.
|
Listing Information |
---|
We have some fantastic gear coming up in this auction. Included are an exceptional Collins KWM-1 Transceiver and Power Supply, the infamous "Gold Dust Twins" and a Hallicrafters SR-2000 Hurricane Transceiver and Power Supply.
Many other Collins items will also be available, such as a rack mount S-Line, including a KWM-2, and another beautiful 30S-1 amplifier, and more. We have a very nice looking Hallicrafters line-up with an SX-101A, HT-32A and an HT-33A, just to name a few. Other vintage gear such as a National FB-7, and NC-303 as well as two Central Electronics Multiphase 100V Exciters will be available.
For those of you who are looking for something a bit on the newer side, we have an ICOM IC-7000 and a complete IC-756PROIII station which includes an SP-21 speaker and an SM-20 desk mic. Both ICOM's are new old stock, as well as the mic and speaker! Also, a great looking Kenwood TS-950S, ICOM IC-761, Ten-Tec Paragon and Omni transceivers are included.
Amplifiers galore! Henry 3K-A, 2K-4 with mods and a 5K-Classic (for restoration) along with a Kenwood TL-922 and a two of the most amazing home brew amps that I've seen in a long time, the "HB-2000" and "HB-3000" with power supplies, all in one rack. You won't need to heat your shack with these in operation!
There is also a great selection of Morse keys and bugs, including a custom made brass Alberto Fratinni Semi Automatic Key made in Italy. Many tubes, new old stock coaxial connectors, test equipment, mics, speakers and much more. Check out the full catalog and as always, thank you for your continued business! 1 PAYMENT! At the conclusion of this auction, the credit card you used to register with will automatically be charged for your purchases. A PAID invoice will be emailed to you. Please be sure that the card you used to register has sufficient funds/credit limit ... 2 UPDATED SHIPPING INFO! IMPORTANT, PLEASE READ IF YOUR ITEMS ARE TO BE SHIPPED! All packing / shipping will be handled by The UPS Store 2923, 5400 Johnson Dr., Mission, KS 66205, where the owner has learned to properly pack and ship vintage electronics equipment as a result... 3 PREVIEW/PICKUP! PREVIEW date is Saturday, 7/28 from 9AM to Noon. PICKUP will be on Saturday 8/4 from Noon to 3PM. If you can not make the pickup date, please make arrangements with auction company beforehand. ALL ITEMS MUST BE PICKED UP BY MID-AUGUST, AS WE ARE M... 4 EQUIPMENT TESTING! When possible, we do our best to test the equipment we sell so that you will know exactly what you are bidding on. That being said, we perform basic tests such as overall power consumption, receiver sensitivity, transmitter power output, etc. Depen... 5 Collins KWM-1 Transceiver and Power Supply Collins KWM-1 Transceiver and Power Supply. Here's one that doesn't come around too often, especially in the condition you see here. There are minimal scratches and scuffs to the transceiver and the knobs do show some wear. The power supply shows a b... 6 Hallicrafters SR-2000 Hurricane & P-2000 Supply Hallicrafters SR-2000 Hurricane & P-2000 Supply, 220V. Beautiful, hard-to-find Halli transceiver in very good working as well as cosmetic condition. The cabinet is void of any major scratches and scuffs with the exception of the top of the power supp... 7 Hallicrafters HT-44 & PS-150-120 Power Supply Hallicrafters HT-44 & PS-150-120 Power Supply. Cosmetically, the transmitter has a few scuffs and scratches, however, the front panel looks very good. The power supply is in good to very good condition, cosmetically and works well. The transmitter p... 8 EF Johnson Viking 500 Transmitter & Power Supply EF Johnson Viking 500 Transmitter & Power Supply, 220V. This is one of the rarer ones! Both the transmitter and power supply are in good to very good condition. The power supply does show some corrosion to the chrome handles and some minor paint ch... 9 Collins KWS-1 and Power Supply Collins KWS-1 and Power Supply. The first half of the "Gold Dust Twins"! (see next LOT for 75A-4). This set appears to be all original and is in good to very good shape cosmetically, as you can see from the photos. There are a few minor scuffs and sc... 10 Collins 75A-4 Receiver Collins 75A-4 Receiver. The second half of the "Gold Dust Twins"! (see KWS-1 in the previous LOT) Very nice 75A-4 both inside and out with minor scuffs, scratches and some paint flaking. Photo 10 shows some attempted paint repair. It appears to be al... 11 Collins 30S-1 Amplifier w/ internal 516F-2 Supply Collins 30S-1 Amplifier w/ internal 516F-2 Supply. This is one very clean, classic amp, both inside and out! Hardly any scratches or scuffs and the front panel looks very good. There is a small scrape on the right front side of the unit at the top wh... 12 Collins KWM-2 Transceiver, Rack Mount, WE Collins KWM-2 Transceiver, Rack Mount, WE. Great looking rig here. Front panel and trim ring look like they just came out of the box. Interior looks great as well. We were able to tune up and obtain about 100W carrier output on all bands except 15 a... 13 Collins 75S-1 Receiver, Rack Mount, WE Collins 75S-1 Receiver, Rack Mount, WE, in good working condition as well as very good cosmetic shape. Front panel and trim ring look like they just came out of the box. Interior looks great as well. See YouTube video. Receiver sensitivity was appr... 14 Collins 32S-1 Transmitter, Rack Mount, WE Collins 32S-1 Transmitter, Rack Mount, WE. This rig is in very good cosmetic as well as working condition, with approximately 70W out CW carrier on all bands. Power consumption is about 113W at idle current, and 300W during transmit. Front panel and... 15 Collins 312B-4 Station Console, Rack Mount, WE Collins Station Console, Rack Mount, WE. This station console is in good working condition. Front panel and trim ring look like they just came out of the box. Interior looks great as well. s/n 56156 Approx. Weight: 13 lbs. Approx. Dims: 19x13x9 16 Collins 516F-2 Power Supply, Rack Mount, WE Collins 516F-2 Power Supply, Rack Mount, WE. In good working condition. Was used and tested with the KWM-2 above. Front panel and trim ring look like they just came out of the box. Interior looks great as well. This unit does not have the built-in sp... 17 Collins 516F-2 Power Supply, Rack Mount, RE Collins 516F-2 Power Supply, Rack Mount, RE. In good working condition. Was used and tested with the 32S-1 above. Front panel and trim ring look like they just came out of the box. Interior looks great as well. This unit does not have the built-in sp... 18 Collins 51J-4 Receiver Collins 51J-4 Receiver, in working condition. No back cover. Approximately 1.0 uv sensitivity and noisy controls which will need cleaning. Three filters installed, as shown in the last photo. s/n 5334 Approx. Weight: 40 lbs. Approx. Dims: 19x16x11 19 77" Rack, Casters, w/ BIRD 4521 & Power Strip This rack originally housed all of the rack mount Collins equipment and the rack mount Astron power supply, all of which are found in this auction. 77" Rack on Casters, w/ BIRD 4521 & Power Strip. This is one well built rack. Includes a BIRD wattmet... 20 Henry 3K-A Linear Amplifier Henry 3K-A Linear Amplifier, in very good cosmetic condition both inside and out, as shown. This amp appears to be all original. With a pair of Eimac 3-500Z's and about 50W of drive, we were able to get about 675W CW carrier output. This amplifier is... 21 Henry 2K-4 Amplifier with Modifications Henry 2K-4 Amplifier with Modifications, 220V. Major mods on this amp, as you can tell from the photos, to both the RF deck and power supply. This work was done by the SK in Vermont, who also built some of the other home brew amps in this auction. P... 22 Henry 5K Classic Linear Amplifier, parts/restore Henry 5K Classic Linear Amplifier, parts/restore. This amp appears complete except for the power supply section. Please see photos. Missing the plate transformer, filter choke and a couple of caps. Included are two relays, the power cord and what loo... 23 Kenwood TL-922 Linear Amplifier Kenwood TL-922 Linear Amplifier. This amplifier uses two 3-500Z's as output tubes. It is in good working as well as cosmetic condition with a few minor scuffs and scratches. This unit is wired for 220V. Using about 60W of drive, the amp produces abo... 24 Home Brew 2KW & 3KW Amps in Rack, 160M-10M Home Brew 2KW & 3KW Amps in Rack, 160M-10M. These amplifiers are truly an awesome display of craftsmanship. They were built by a SK out of Vermont and are in working condition, as well as great cosmetic condition. According to the SK's son, his dad w... 25 ICOM IC-756PROIII, with SM-20 & SP-21, NOS ICOM IC-756PROIII, with SM-20 & SP-21, New Old Stock. A complete station, including the SM-20 desk mic, and the SP-21 speaker. All are new old stock. We did not remove the speaker from the box due to the tight packing job. However, we did remove the... 26 ICOM IC-7000, NOS ICOM IC-7000, New Old Stock. We did remove the radio from the box to give it a brief test to make sure it wasn't a DOA. No problems, over 90W CW carrier output and the receiver sounds great, see YouTube video. All accessories and extra connectors inc... 27 Kenwood TS-950S Digital HF Transceiver w/DSP-10 Kenwood TS-950S Digital HF Transceiver. Super nice looking transceiver in good working condition. Receive sounds great despite the band conditions the day the YouTube video above, was recorded. The optional DSP-10 digital signal processor (see above ... 28 ICOM IC-761 HF Transceiver ICOM IC-761 HF Transceiver in good working as well as cosmetic condition. Power output was 100W CW carrier out on all bands except 10M, where it was 92W. You will need to supply your own, standard IEC power cord. Approx. Weight: 40 lbs. Approx. Dims... 29 Ten Tec 585 Paragon Xcvr. & 260 Power Supply Ten Tec 585 Paragon Transceiver & 260 Power Supply. Units are in good to very good cosmetic as well as working condition. The transceiver does NOT have the FM option installed. Power out was approximately 90W carrier on all bands except for 10M wher... 30 ICOM IC-R7000 Receiver ICOM IC-R7000, 25 MHz through 1999 MHz, VHF, UHF and FM receiver, in good working condition with 0.1 uv sensitivity throughout. 31 ICOM IC-781 for parts or restoration NOTE: This radio will be shipped from Las Vegas, NV for a flat rate of $100 to anywhere in the contiguous 48 states. If you prefer to pickup or live elsewhere, please contact auction company to arrange. Normal preview dates/pickup dates do not apply ... 32 Kenwood R-599A Receiver & S-599 Speaker Kenwood R-599A Receiver & S-599 Speaker. Both of these units are in good condition, with minor scuffs and scratches. The receiver sensitivity is 0.3 uv or better on all bands. 144/50 MHz crystal converters are not included. The speaker is in good w... 33 Kenwood R-599 Receiver Kenwood R-599 Receiver in good working condition with 0.3 uv sensitivity or better on all bands. This radio includes the 50/144 MHz VHF options. Approx. Weight: 18 lbs. Approx. Dims: 14x11x7 34 Yaesu FT-901 DM HF All Mode Transceiver Yaesu FT-901 DM HF All Mode Transceiver. Here's a very nice looking, well cared for, Yaesu rig that has great receiver sensitivity at approximately 0.3 uv on all bands. Also, transmit on all bands produced 75-90W CW carrier output. Power consumption ... 35 Kenwood TS-430S HF Transceiver Kenwood TS-430S HF Transceiver in good working condition. Transmit was approximately 100W on 80M through 15M, and 85W on 10M. Power consumption was approximately 700 ma in receive and 17A during transmit at 13.8VDC. (power cord not included). Cosmet... 36 Yaesu FT-101ZD Transceiver Yaesu FT-101ZD Transceiver in good to very good cosmetic condition. This rig has a good receiver, about 0.5 uv sensitivity on all bands. However, it will not transmit. No power cable included. Approx. Weight: 36 lbs. Approx. Dims: 16x14x8 37 Yaesu FT-101EE, FV-101B & Landliner Yaesu FT-101EE, FV-101B & Landliner. Overall good costmetic condition on all of these units with some minor scuffs/scratches. The transceiver receives well, however, there is no power output. Switches and pots are dirty, and will need to be addresse... 38 Yaesu YO-100 Monitor Scope Yaesu YO-100 Monitor Scope in good working condition, as shown. This unit still has the clear plastic covering over the front panel. The cabinet is in very good cosmetic condition. Approx. Weight: 14 lbs. Approx. Dims: 13x8x7 39 Kenwood SP-820 Speaker Kenwood SP-820 Speaker in good working condition. Cosmetically, in good condition as well, with minor wear, as shown. Approx. Weight: 5 lbs. Approx. Dims: 14x7x6 40 Kenwood SP-820 Speaker Kenwood SP-820 Speaker in good working condition. Cosmetically, in good condition as well, with some wear, as shown. Approx. Weight: 5 lbs. Approx. Dims: 14x7x6 41 Kenwood SP-820 Speaker Kenwood SP-820 Speaker in good working condition. Cosmetically, in good condition as well, with minor wear, as shown. Approx. Weight: 5 lbs. Approx. Dims: 14x7x6 42 Kenwood TS-830S Transceiver & Shure Mic Kenwood TS-830S Transceiver & Shure Mic. Very nice looking radio, with only minor wear. Transmit was 100W plus on 160M-20M, and about 75W on 10/15M. Receive was 0.5 uv or less on all bands. Original manual and Shure hand mic, model 401A, included. ... 43 Drake UV-3 FM Transceiver Drake UV-3 FM Transceiver, tri-bander. Nice piece of vintage gear, in working condition. 144/440 was tested and both transmit and receive work well. 220 was not tested. NOTE: there is no 12VDC power cord, so we used test leads for testing the unit. ... 44 Drake TR-3 Transceiver Drake TR-3 Transceiver. In good to very good cosmetic condition. The rig does power on and draws approximately 108W in standby. No transmit or receive functionality. Manual included. No power supply with this unit. Approx. Weight: 17 lbs. Approx. ... 45 Kenwood SP-820 Speaker Kenwood SP-820 Speaker in good to very good condition, as shown. Works great! Approx. Weight: 5 lbs. Approx. Dims: 14x7x6 46 Kenwood TS-520S & DG-5 Digital Display Kenwood TS-520S & DG-5 Digital Display. Receive sounds good on this rig, however, there is not transmit power out. Digital display is in good working condition. Power cord and all cables for the DG-5 are included. This set draws approximately 45W in ... 47 Kenwood TS-520 Transceiver & SP-520 Speaker Kenwood TS-520 Transceiver & SP-520 Speaker. Both units are in good cosmetic condition with only minor scratches or scuffs. The radio will not transmit without blowing a fuse, however, the receiver is in working condition with about 0.3 uv sensitiv... 48 Kenwood R-820 Receiver Kenwood R-820 Receiver in good working and cosmetic condition. Receiver sensitivity is approximately 0.1 uv. The only thing we noticed was that notch filter does not appear to work. s/n: 760127 Approx. Weight: 25 lbs. Approx. Dims: 15x13x8 49 Kenwood R-820 Receiver Kenwood R-820 Receiver in good working and cosmetic condition. Receiver sensitivity is approximately 0.1 uv. s/n: 840131 Approx. Weight: 25 lbs. Approx. Dims: 15x13x8 50 Cubic Astro-103 Xcvr, PSU-6A Supply & ST-3B Tuner Cubic Astro-103 Xcvr, PSU-6A Supply & ST-3B Tuner. This station is complete and in good working condition. Power output is minimum 80W on all bands. Approximate power consumption is 40W in receive and 140W during transmit. Cosmetically, there are a f... 51 Cubic Astro-103 Xcvr, PSU-6A Supply & ST-3B Tuner Cubic Astro-103 Xcvr, PSU-6A Supply & ST-3B Tuner. Another complete station. Power output is minimum 60W CW carrier on all bands. However, there is NO SSB transmit audio. Approximate power consumption is 40W in receive and 140W during transmit. Cosme... 52 Cubic ST-5 Antenna Tuner Cubic ST-5 Antenna Tuner in good working condtion. Approx. Weight: 3 lbs. Approx. Dims: 11x4x4 53 Cubic ST-3C Rack Mount Antenna Tuner Cubic ST-3C Rack Mount Antenna Tuner in good working condition. Approx. Weight: 11 lbs. Approx. Dims: 20x10x4 54 Ten-Tec Omni Transceiver, Power Supply, Tuner Ten-Tec Omni Transceiver, Power Supply, Tuner. Very nice looking, complete station. Power supply and model 227 tuner are in good working condition, as is the Omni transceiver. Approximately 100W carrier output on all bands with receive sensitivity le... 55 Yaesu YC-601 Digital Display Unit Yaesu YC-601 Digital Display Unit in good working as well as cosmetic condition. Approx. Weight: 6 lbs. Approx. Dims: 10x9x4 56 Kenwood TS-520SE Transceiver Kenwood TS-520SE Transceiver in good overall cosmetic condition, just missing the side panel cover, as shown. Power output is approximately 90W out CW carrier on 80-15M and 80W out on 10M. Receiver sensitivity is about 0.5 uv on all bands. Power con... 57 Yaesu YC-601 Digital Display & Box Yaesu YC-601 Digital Display & Box. Unit is in good working condition on all bands. Approx. Weight: 5 lbs. Approx. Dims: 10x9x4 58 Kenwood DG-5 Digital Display Kenwood DG-5 Digital Display. Power on test is good, no further testing was performed. Power cord not included. Approx. Weight: 2 lbs. Approx. Dims: 10x7x2 59 Kenwood DG-5 Digital Display Kenwood DG-5 Digital Display. The display works, but no other testing was performed. Various cables and DC power cord included, as shown. Approx. Weight: 2 lbs. Approx. Dims: 10x7x2: 60 Kenwood AT-180 Antenna Tuner Kenwood AT-180 Antenna Tuner, as shown. In working condition. Nice looking tuner, only a few minor scuffs and scratches. Approx. Weight: 8 lbs. Approx. Dims: 14x7x6 61 Kenwood SP-930 Speaker Kenwood SP-930 Speaker in good working and looking condition! Approx. Weight: 5 lbs. Approx. Dims: 11x7x6 62 Kenwood AT-250 Auto Antenna Tuner Kenwood AT-250 Auto Antenna Tuner in good working and looking condition. IEC power cord, DIN cable and 12VDC power cord included. Approx. Weight: 10 lbs. Approx. Dims: 11x7x4 63 Kenwood S-599 Speaker Kenwood S-599 Speaker, good working condition. Cosmetically, the case does show some wear, and the speaker grill has a ding in the upper left corner as shown in the last photo. Approx. Weight: 2 lbs. Approx. Dims: 8x6x6 64 Kenwood SP-520 Speaker Kenwood SP-520 Speaker in good working condition, as shown. Approx. Weight: 4 lbs. Approx. Dims: 8x7x7 65 Kenwood SP-70 Speaker Kenwood SP-70 Speaker, in working condition, as shown. Approx. Weight: 3 lbs. Approx. Dims: 8x6x6 66 ICOM SP-20 Speaker ICOM SP-20 Speaker in good working as well as cosmetic condition. Approx. Weight: 7 lbs. Approx. Dims: 14x8x7 67 Yaesu SP-901P Speaker Yaesu SP-901P Speaker in good working condition. Phone patch functionality was not tested. LO-Z input cable included as well as a copy of the manual, not shown. Approx. Weight: 8 lbs. Approx. Dims: 13x9x7 68 Yaesu SP-901 Speaker Yaesu SP-901 Speaker in good working condition. It appears that the original back was replaced with a styrofoam back, as shown. Approx. Weight: 5 lbs. Approx. Dims: 8x8x8 69 ICOM IC-701PS Power Supply ICOM IC-701PS Power Supply in working condition. Cosmetically, fair to good shape, as shown. Please note, the power switch is broken off the back of the unit. It has been bypassed and is permanently ON. Approx. Weight: 18 lbs. Approx. Dims: 11x8x5 70 Kenwood PS-30 Power Supply Kenwood PS-30 Power Supply in working condition, as shown. Approx. Weight: 20 lbs. Approx. Dims: 13x7x6 71 Kenwood VFO-820 Kenwood VFO-820, as shown, untested. No cables included. Approx. Weight: 7 lbs. Approx. Dims: 9x7x7 72 ICOM IC-21 Transceiver ICOM IC-21 Transceiver. Crystal set with about 6-8W output. Power consumption is 6W during standby and 20W during transmit, both at 115VAC. Mic and power cord included. Approx. Weight: 15 lbs. Approx. Dims: 12x9x5 73 Yaesu FM-1 Unit for FT-920, NOS Yaesu FM-1 Unit for FT-920, NOS. As shown. 74 Drake 2-B Receiver Drake 2-B Receiver. This unit draws approximately 28W at 115VAC. Receive sensitivity is 5.0 uv on 80M - 20M, and no receive on 15M - 10M. There are some scratches and scuff as well as some paint loss on this unit, however, in overall good condition. ... 75 Drake 2-B Receiver Drake 2-B Receiver in working condition with about 0.5 uv sensitivity in receive. There is no AF output when switched from PROD (CW and SSB) to DIODE (AM). Cabinet is in overall good condition with minimal scuffs and scratches. Copy of manual inclu... 76 Drake 2-AQ Q Multiplier Drake 2-AQ Q Multiplier in good working condition. Approx. Weight: 4 lbs. Approx. Dims: 8x7x6 77 Swan 500CX & Swan 350 Transceivers Swan 500CX & Swan 350 Transceivers. The 500CX was tuned up with about 90W carrier output. Receive was very weak, only able to push a 50 uv signal through it. Power consumption during receive was about 113W and during transmit, about 380W. Both at 115... 78 Swan 500C SSB Transceiver Swan 500C SSB Transceiver. Receive is very weak with no TX/RX on 21-28 MHz. However, 100W carrier output on 14-3.5 MHz. Note, we used an in-house power supply to test this set. Power supply not included. Cosmetically, the cabinet and front panel ar... 79 Swan 500CX SSB Transceiver & 117XC Supply Swan 500CX SSB Transceiver & 117XC Supply. This transceiver does not have any finals installed, so it was untested and you'll have to supply your own. Cosmetically, the radio is in good condition with the top right lip of the cabinet, bent, as shown.... 80 Swan 117XC Power Supply & Speaker Swan 117XC Power Supply & Speaker in good working condition, including speaker. Front right foot is missing as well as the power cord and connector, as shown. We used an in-house test cable to determine functionality. Approx. Weight: 19 lbs. Approx.... 81 Swan WM-3000 Peak Reading Watt Meter Swan WM-3000 Peak Reading Watt Meter in good working as well as cosmetic condition. Approx. Weight: 4 lbs. Approx. Dims: 8x6x5 82 National NC-303 Receiver & NC-300TS Speaker National NC-303 Receiver & NC-300TS Speaker. Both the receiver and the speaker are in good working condition, with about 0.5 uv or less sensitivity in receive on all bands. The receiver draws about 78W at 115VAC. This unit does have a Galaxy crystal ... 83 National NC-270 Receiver National NC-270 Receiver in very nice looking cosmetic condition. The only flaw with the case that can see is a small ding to the top left front, as shown in photo number 8. Approximate power consumption is 80W at 115VAC. Receiver sensitivity is 0.5... 84 Central Electronics Multiphase 100V Exciter/Xmtr Central Electronics Multiphase 100V Exciter/Xmtr. This transmitter is a beast! Cosmetically, it does show some corrosion inside and out. However, we were able to produce about a 100W CW carrier when tuning up. That being said, the band switch dial wi... 85 Central Electronics Multiphase 100V Exciter/Xmtr Central Electronics Multiphase 100V Exciter/Xmtr. Cosmetically, it does show some corrosion inside and out. The band switch dial does work, however, the tuning dial slips and will need repair/adjustment. Power consumption was 200W at 115VAC in stand... 86 Hammarlund HX-50A Transmitter Hammarlund HX-50A Transmitter in great looking cosmetic condition, and this is one of only 3 models of transmitters made by the company. They definitely don't come around too often. Electrically, there have been mods done as shown. Some additional w... 87 Hallicrafters HT-32A MARK 1 Transmitter Hallicrafters HT-32A MARK 1 Transmitter. Absolutely beautiful transmitter. You don't often see them in this condition. Clean on the inside as well as out, as shown. Power output was approximately 75-80W out CW carrier. Fan runs quiet and smooth. Add ... 88 Hallicrafters HT-33A Linear Amplifier, 110V Hallicrafters HT-33A Linear Amplifier. This is probably one of nicest looking HT-33A's I've seen. Only a few scuffs and scratches and the front panel and cabinet look very good. Doubt if you'll find a cleaner one around! Electrically, we were able t... 89 Hallicrafters SX-101A Receiver Hallicrafters SX-101A Receiver in good to very good cosmetic condition, as shown. This rig in in working condition with 80M receive at about 0.5 uv sensitivity and at the opposite end of the bands, 15M is around 15.0 uv sensitivity. May need an align... 90 Hammarlund HQ-100 Receiver Hammarlund HQ-100 Receiver. Powers up, but no receive or noise. Power consumption is about 120W at 115VAC. The clock on this set is in working condition. Cosmetically, there are some scuffs and scratches, but the cabinet and front panel is in overall... 91 Hammarlund S-100 Speaker Hammarlund S-100 Speaker in good working condition, as shown. Approx. Weight: 7 lbs. Approx. Dims: 10x10x7 92 Hammarlund S-100 Speaker Hammarlund S-100 Speaker in good working condition, as shown. Approx. Weight: 7 lbs. Approx. Dims: 10x10x7 93 Hammarlund S-200 Speaker Hammarlund S-200 Speaker in good working condition. Cosmetically, there are noticeable areas of corrosion, as shown. Also, scratches and scuffs as well as a couple dings to the cabinet. Approx. Weight: 9 lbs. Approx. Dims: 12x11x9 94 Hallicrafters PM-23 Speaker Hallicrafters PM-23 Speaker in fair to good cosmetic condition with some surface corrosion. Driver works well. Approx. Weight: 17 lbs. Approx. Dims: 16x12x11 95 Hallicrafters PM-23 Speaker Hallicrafters PM-23 Speaker, it appears the transformer was bypassed. Ohmmeter reading at the terminals is 3.2 ohms. Approx. Weight: 17 lbs. Approx. Dims: 16x12x11 96 Hammarlund S-200 Speaker Hammarlund S-200 Speaker in good working condition. Cosmetically, there are some scuffs and scratches but it is in overall good condition. Approx. Weight: 9 lbs. Approx. Dims: 12x11x9 97 LOT of 3 Hammarlund, National Speakers LOT of 3 Hammarlund, National Speakers all in good working condition. The cabinets are in fair/good shape, but do exhibit some scuffs, scratches and corrosion. It appears that the drivers were replaced in the bottom two (Hammarlund) speakers. The Nat... 98 Heathkit SB-614 Monitor Scope Heathkit SB-614 Monitor Scope in very good cosmetic as well as working condition! Approx. Weight: 11 lbs. Approx. Dims: 15x10x7 99 Heathkit SB 614 Monitor Scope Heathkit SB 614 Monitor Scope in good working as well as cosmetic condition. Approx. Weight: 11 lbs. Approx. Dims: 15x10x7 100 Heathkit SB-634 Station Console Heathkit SB-634 Station Console in working condition, however the switches are dirty and will need to be cleaned/lubricated. Original manual included. Approx. Weight: 10 lbs. Approx. Dims: 14x10x6 101 Heathkit SB-634 Station Console Heathkit SB-634 Station Console in working condition, however the switches are dirty and will need to be cleaned/lubricated. Original manual included. Approx. Weight: 10 lbs. Approx. Dims: 14x10x6 102 Heathkit SB-610 Station Monitor Heathkit SB-610 Station Monitor. This unit may have bad power supply caps, but the CRT does have a trace. Approx. Weight: 10 lbs. Approx. Dims: 12x10x7 103 Heathkit HW-12A Single Bander SSB Transceiver Heathkit HW-12A Single Bander SSB Transceiver. Very nice looking, clean rig. Power output is about 25W and receiver sensitivity is approximately 0.2 uv. Power consumption is 212W during transmit and 90W in standby, both at 115VAC. No power supply is ... 104 Heathkit HW-12A Single Bander SSB Transceiver Heathkit HW-12A Single Bander SSB Transceiver. Another very nice looking, clean rig. Power output is approximately 45W. Receiver sensitivity is about 0.3 uv. Power consumption is 101W in standby, and 240W during transmit, both at 115VAC. No power s... 105 Heathkit HW-22A Single Bander SSB Transceiver Heathkit HW-22A Single Bander SSB Transceiver. This rig does show some definite paint fading and chipping, as well as some corrosion on the outside of the cabinet. However, power output is approximately 50W with about 0.3 uv receive sensitivity. Powe... 106 Heathkit HW-30 Two Meter Transceiver Heathkit HW-30 Two Meter Transceiver. In very good to excellent cosmetic condition. The unit does power up with about 38W power consumption at 115VAC, during receive. No further testing was done. Power cord included. Approx. Weight: 7 lbs. Approx. D... 107 Heathkit GR-64 Shortwave Receiver Heathkit GR-64 Shortwave Receiver. Receive is OK on all bands with a sensitivity of about 3.0 uv. Approx. Weight: 12 lbs. Approx. Dims: 14x9x6 108 E.F. Johnson Viking Matchbox E.F. Johnson Viking Matchbox. As shown in good to very good condition, otherwise untested. Approx. Weight: 8 lbs. Approx. Dims: 12x10x7 109 RME DM-36 Band Expander RME DM-36 Band Expander. In good condition cosmetically, as shown. Tuning pointer and knob function as intended. No further testing was performed. Approx. Weight: 18 lbs. Approx. Dims: 11x10x9 110 Allied A-2516 Receiver Allied A-2516 Receiver working on all bands with a sensitivity of approximately 1.0 uv. Good cosmetic condition. Approx. Weight: 18 lbs. Approx. Dims: 13x11x8 111 Heathkit SB-301 Receiver Heathkit SB-301 Receiver, no receive but we can detect a slight AC hum. For parts or restoration. No power cord included. Very clean on the inside, with all filters installed, as shown. Approx. Weight: 17 lbs. Approx. Dims: 16x15x8 112 Heathkit SB-400 Transmitter Heathkit SB-400 Transmitter, missing front knob and no final tubes. Untested. As shown. No power cord included. Approx. Weight: 26 lbs. Approx. Dims: 15x15x8 113 Heathkit SB-401 Transmitter Heathkit SB-401 Transmitter. This rig does not produce any power out. However, power consumption is approximately 80W in standby. No power cord included. Approx. Weight: 27 lbs. Approx. Dims: 16x15x8 114 Heathkit HW-100 & HW-101 Xcvrs. Parts/Repair Heathkit HW-100 & HW-101 Xcvrs. Parts/Repair. No transmit or receive from either of these. The 100 draws about 65W and the 101 draws about 100W at 115VAC. The HW-100 is also missing the dial glass. Approx. Weight, each: 16 lbs. Approx. Dims, each: ... 115 National NC-100 Receiver National NC-100 Receiver in good cosmetic condition, however, due to the frayed power cord, and transformer housing not being bolted down, no testing was performed. Bound manual reprint with full, fold out schematics, included. Approx. Weight: 55lbs... 116 National NC-101X Receiver National NC-101X Receiver, no audio output or "S" meter reading. "S" meter does deflect, however. Power consumption at 115VAC was 35W. Approx. Weight: 55lbs. Approx. Dims: 18 x 12 x 10 117 Heathkit VF-1 VFO Heathkit VF-1 VFO untested, but in very good cosmetic condition and all dial and knobs function mechanically, as intended. Approx. Weight: 4 lbs. Approx. Dims: 8x8x7 118 Heathkit SB-604 Speaker with HP-1144 Power Supply Heathkit SB-604 Speaker with HP-1144 Power Supply. This unit tests at 13.8V and is complete. Overall good cosmetic condition. Approx. Weight: 27 lbs. Approx. Dims: 15x10x7 119 Heathkit SB-604 Speaker with HP-1144 Power Supply Heathkit SB-604 Speaker with HP-1144 Power Supply. This unit tests at 13.8V and is complete. Overall fair to good cosmetic condition with some minor paint chips and scuffs and scratches. Approx. Weight: 27 lbs. Approx. Dims: 15x10x7 120 Heathkit HP-23-A Power Supply Heathkit HP-23-A Power Supply. Appears original and complete, but is non-operational. Approx. Weight: 16 lbs. Approx. Dims: 9x7x5 121 Gonset Communicator II Transmitter Gonset Communicator II, 2M Transmitter, as shown. Untested. The meter movement does deflect using an ohmmeter. Coax connector insulation is cracked inside the female SO-239. It does appear that the original tuning eye was replaced by the Gonset meter... 122 National FB-7 Receiver & Power Supply National FB-7 Receiver. Here's something you don't see every day. The receiver appears to be all original, tuning dial does work, but otherwise untested. Power supply included, appears to have had the case rebuilt as well as some of the supply itself... 123 National 697 Power Supply National 697 Power Supply. This unit looks as if it just came out of the box. Voltages test ok, output 260VDC and 6.4VAC. Approx. Weight: 13 lbs. Aprpox. Dims: 8x8x7 124 National 697 Power Supply National 697 Power Supply. This supply is in fair/good cosmetic condition, with some scuffs, scratches and corrosion shown on the case. Voltages test ok, output 260VDC and 6.4VAC. Approx. Weight: 13 lbs. Aprpox. Dims: 8x8x7 125 RME HF 10-20 Converter RME HF 10-20 Converter, as shown. Untested. Cosmetic condition is good to very good. Tuning knob and dial are working. Approx. Weight: 21 lbs. Approx. Dims: 12x11x11 126 Hallicrafters SR-160 Transceiver Hallicrafters SR-160 Transceiver. Powers on and draws approximately 120W at 115VAC. No transmit or receive. Power supply not included. Approx. Weight: 14 lbs. Approx. Dims: 13x13x7 127 Hallicrafters PS-150-120 Power Supply / Speaker Hallicrafters PS-150-120 Power Supply / Speaker. PLEASE NOTE: The case for this supply is marked as a P-500 and the back cover is marked PS-150-120. After comparing it to an actual PS-150-120, it appears that the unit was replaced in P-500 case, but... 128 Homebrew HF Amplifier Homebrew HF Amplifier using 4, 6JE6 power output tubes. This unit does power up and draws about 300-325W at 115VAC in standby. All tube filaments light. No further testing was done. Approx. Weight: 20 lbs. Approx. Dims: 12x12x7 129 Yaesu FRDX400 Receiver Yaesu FRDX400 Receiver. Powers up and power consumption is about 50W. Otherwise, the receiver is non-operational. A great summer project! Approx. Weight: 25 lbs. Approx. Dims: 17x15x7 130 Central Electronics Model A Sideband Slicer Central Electronics Model A Sideband Slicer, untested as shown. There are signs of corrosion on the case. Approx. Weight: 13 lbs. Approx. Dims: 15x9x6 131 Hammarlund SP-200 Power Supply Hammarlund SP-200 Power Supply. All windings have continuity, but no further testing was done. Approx. Weight: 30 lbs. Approx. Dims: 13x8x8 132 Hallicrafters HT-22 LWS Little Fone Hallicrafters HT-22 LWS Little Fone. This is a VHF set commonly used by the railroads back in the day. Untested, as shown. Approx. Weight; 8 lbs. Approx. Dims: 13x8x4 133 CBS Laboratories Audimax RIIZ Auto Level Control CBS Laboratories Audimax RIIZ Automatic Level Control. No tubes included, as shown. Untested. Approx. Weight: 20 lbs. Approx. Dims: 19x13x6 134 Crown Reel to Reel Model GCR Crown Reel to Reel Magnetic Tape Recorder Model GCR, as shown. International Radio & Electronics Corp. s/n 6075. We did perform a power on test and the capstan did spin up. No further testing was performed. Power cord is not included. Approx. Weight... 135 Garrard Lab 80 Auto Transcription Turntable Garrard Lab 80 Auto Transcription Turntable. As shown, untested. Manual included. Approx. Weight: 16 lbs. Approx. Dims: 15x13x4 136 Sirius Sportster XM Satellite Radio and extras Sirius Sportster Satellite Radio and extras. This unit does power up, but no further testing was done. Items included, as shown. Approx. Total Weight: 15 lbs. 137 HP-410B Vacuum Tube Voltmeter HP-410B Vacuum Tube Voltmeter. Absolutely beautiful piece of test gear. Almost looks like new! This set is in 100% working condition with all the probes, as shown. ****It will require calibration, however.**** Approx. Weight: 10 lbs. Approx. Dims: 1... 138 HP-606B Signal Generator HP-606B Signal Generator. No response from any functions on the front panel. The unit will only power on. Still a great looking unit that will require some repair and/or restoration. Power cord and manual included. Approx. Weight: 53 lbs. Approx. D... 139 HP-5382A, 225 MHz Frequency Counter HP-5382A, 225 MHz Frequency Counter. In good working condition, about 31 mv sensitivity at 225 MHz. IEC power cord included. Approx. Weight: 4 lbs. Approx. Dims: 10x6x4 140 HP-427A Voltmeter HP-427A Voltmeter in good working condition. As shown. Power cord included. Approx. Weight: 4 lbs. Approx. Dims: 10x6x5 141 HP-427A Voltmeter HP-427A Voltmeter basically works, but will need some TLC, cleaning and calibration. No power cord included. Approx. Weight: 4 lbs. Approx. Dims: 10x6x5 142 HP-427A Voltmeter HP-427A Voltmeter basically works, but will need some TLC, cleaning and calibration. No power cord included. Also, handle is missing as well as the rear foot, as shown. Approx. Weight: 4 lbs. Approx. Dims: 10x6x5 143 Diamond SX-100 SWR & Power Meter Diamond SX-100 SWR & Power Meter. Great looking and working meter, as shown. Approx. Weight: 2 lbs. Approx. Dims: 6x4x3 144 LABCONCO 3000V Low Current Power Supply LABCONCO 3000V Low Current Power Supply. Powers on, but otherwise untested other than the display, as shown. Probes and IEC power cord are NOT included. Approx. Weight: 16 lbs. Approx. Dims: 14x10x7 145 Sencore LC-53 Z Meter Capacitor Inductor Analyzer Sencore LC-53 Z Meter Capacitor Inductor Analyzer. In good working condition. Cosmetically, good with a few minor scuffs and scratches. Test cable included, as shown. Approx. Weight: 8 lbs. Approx. Dims: 12x9x6 146 Yaesu YP-150 Dummy Load / Wattmeter Yaesu YP-150 Dummy Load / Wattmeter. 150W max. In good working condition on all ranges. Approx. Weight: 6 lbs. Approx. Dims: 12x7x4 147 HP-427A Voltmeter HP-427A Voltmeter in good working condition, near calibration. Power cord included, no probes. Approx. Weight: 5 lbs. Approx. Dims: 9x7x5 148 HP 400E AC Voltmeter HP 400E AC Voltmeter in working condition but will need calibration. Good cosmetics, as shown. No probes or power cord come with this set. Approx. Weight: 8 lbs. Approx. Dims: 12x6x5 149 Superior Elect Powerstat 216B / Variac Superior Elect Powerstat 216B / Variac. In good working condition. Approx. Weight: 10 lbs. Approx. Dims: 8x5x5 150 Sencore FC45 Frequency Counter Sencore FC45 Frequency Counter. This unit does power up, all digits display, but it does NOT count. Manual is included. Approx. Weight: 8 lbs. Approx. Dims: 12x8x6 151 HP 400LR Rack Mount Voltmeter HP 400LR Voltmeter / Rack Mount. This unit does work but is going to need some TLC as well as calibration. Approx. Weight: 15 lbs. Approx. Dims: 19x12x7 152 DAIWA PS-304 Power Supply DAIWA PS-304 Power Supply. The voltage regulator on this unit works, however, there are only a few milliamps of output current. Approx. Weight: 18 lbs. Approx. Dims: 10x7x6 153 Diamond SX-200 SWR & Power Meter Diamond SX-200 SWR & Power Meter in good working condition. Approx. Weight: 2 lbs. Approx. Dims: 5x6x3 154 Microwave Devices Micromatch 262 RF Power Meter Microwave Devices Micromatch 262 RF Power Meter in good working condition, as shown. With 261.1 coupler unit. Approx. Weight: 2 lbs. Approx. Dims: 5x4x4 155 Heathkit HM-2102 SWR Meter Heathkit HM-2102 SWR Meter in good working condition. Cosmetically, there is a ding on right front of the case, as shown. Approx. Weight: 3 lbs. Approx. Dims: 6x5x5 156 Drake W-4 Wattmeter Drake W-4 Wattmeter in good working condition, manual included. Approx. Weight: 2 lbs. Approx. Dims: 6x4x4 157 Drake WH7 Wattmeter Drake WH7 Wattmeter in good working condition, as shown. Approx. Weight: 3 lbs. Approx. Dims: 7x7x5 158 Drake SP75 Speech Processor Drake SP75 Speech Processor, as shown, untested. Very good cosmetic condition. Approx. Weight: 2 lbs. Approx. Dims: 8x7x2 159 Conar Model 223 Tube Tester Conar Model 223 Tube Tester. Very nice looking tube tester in working condition, but may need some calibration. Line adjust works fine as does the roll chart. Includes manuals and supplements as shown. Approx. Weight: 12 lbs. Approx. Dims: 16x11x7 160 Tektronix 2236 100 MHz Oscilloscope Tektronix 2236 100 MHz Oscilloscope. Cosmetically, the case shows some wear. Very nice, bright, crisp trace. Both channels working, as well as the counter. Please note the photo of the trace/counter is a bit distorted due to the refresh rate on the s... 161 Tektronix 468 Digital Storage Oscilloscope Tektronix 468 Digital Storage Oscilloscope. The case does show some wear as well as some dings. CH1 position control pot is broken off and the trigger knob is bent. CH1 trace is OK, but CH2 trace is unable to be seen because it is too low on the scr... 162 Tektronix 453 Scope & Mobile Cart Model 3 Tektronix 453 Scope & Mobile Cart Model 3. Cart is in good working condition. The scope controls are very dirty and we were unable to get a steady trace. It does have a bright CRT. Scope cover/lid included. Approx. Weight: 75-100 lbs. Approx. Dims: ... 163 EICO 460 Oscilloscope EICO 460 Oscilloscope. Cosmetic condition is good, with a small amount of corrosion around the display hood. It is working, however the CRT is dim and the waveform in noisy and distorted. Copy of manual included. Approx. Weight: 23 lbs. Approx. Dims... 164 (5) Various EICO Testers (5) Various EICO Testers. Included are: Model 337 Audio Sine and Square Wave Generator. In working condition with manual. (2) Model 221 VTVM's. One is working and fairly accurate, the other will not zero. Model 950B Capacitance Bridge in working c... 165 Olson KB-141 Signal Generator / Tracer Olson KB-141 Signal Generator / Tracer. In overall good cosmetic condition. Signal is distorted and weak with some dead spots. Will need some servicing. Manual included. Approx. Weight: 6 lbs. Approx. Dims: 10x7x6 166 MFJ-1701 6-position Antenna Switch MFJ-1701 6-position Antenna Switch, like new appears to never have been used. In excellent working condition. Approx. Weight: 2 lbs. Approx. Dims: 11x4x4 167 MFJ-1701 6-position Antenna Switch MFJ-1701 6-position Antenna Switch, like new appears to never have been used. In excellent working condition. Approx. Weight: 2 lbs. Approx. Dims: 11x4x4 168 B&W 425 Low Pass Filter B&W 425 Low Pass Filter in good working condition. Roll off at 35 MHz. 169 DAIWA CN-801 Type HP Cross Needle SWR & Pwr Meter DAIWA CN-801 Cross Needle SWR & Power Meter in good working condition. This is a type HP, 1.8 - 200 MHz. This unit appears hardly used, if at all. Original box, manual and 12VDC power cord for dial light included. s/n 1809 Approx. Weight: 3 lbs. Ap... 170 Palomar P-408 Preamplifier Palomar P-408 Preamplifier, powers on, however, there is no apparent change in signal when operating the unit. Approx. Weight: 2 lbs. Approx. Dims: 9x4x3 171 BIRD Termaline 61 Wattmeter BIRD Termaline 61 Wattmeter, 30-500 MHz, 5 - 25 W. In good working condition. Approx. Weight; 7 lbs. Approx. Dims: 9x7x4 172 BK Precision E-310B & E-200D Generators BK Precision E-310B & E-200D Generators. The RF generation has a distorted signal and dirty controls. The square/sine wave generator displays a nice sine wave and appears to be working, see photos. Tek probe included as well as manual for the RF gene... 173 Tokyo HY-POWER HC-400L Antenna Tuner w/1:4 Balun Tokyo HY-POWER HC-400L w/1:4 Balun. Looks like it just came out of the box! In working condition with 1:4 balun installed. Approx. Weight: 8 lbs. Approx. Dims: 10x10x5 174 (2) Ten-Tec 228 Antenna Tuners (2) Ten-Tec 228 Antenna Tuners. Both are in working condition, you are bidding on the pair. Approx. Weight: 4 lbs. each Approx. Dims: 10x8x4 each 175 Hammarlund BC-779/SP-200 Receiver Hammarlund BC-779/SP-200 Receiver. I'm guessing at the model, but I think it's close and definitely military. No identification on this rig. No power cord either, so testing was not performed. Nice restoration project! Approx. Weight: 50 lbs. Approx... 176 RT-77/GRC-9 & RT-77A/GRC-9 Transmitter-Receiver RT-77/GRC-9 & RT-77A/GRC-9 Transmitter-Receiver. As shown, complete with manual. Power supply not included, no testing was performed. Cover is included, as shown. Approx. Weight: 35 lbs. Approx. Dims: 17x12x6. 177 Motorola R-390A/URR Receiver, w/Collins PTO Motorola R-390A/URR Receiver. Cosmetically, the front panel and dials do show some wear. However, the receiver is in working condition and sensitivity is about 2.0 uv. Power consumption is 100W at 115VAC. There is no end connector on the power cord, ... 178 H-138/U Military Handset H-138/U Military Handset, as shown. 179 Hammarlund R-274/FRR / SP-600 JX-1 Hammarlund R-274/FRR / SP-600 JX-1. No RX noise at all, however, the unit does power up and draw approximately 109W at 115VAC. Custom wood cabinet. Approx. Weight: 80 lbs. Approx. Dims: 21x19x13 180 Imperial R-390A/URR Receiver Imperial R-390A Receiver in good working as well as cosmetic condition. It does have a metal top cover, as shown. Approximately 1.0 uv sensitivity in receive and the controls are a bit noisy and will need cleaning. Power consumption was approximately... 181 RCA 6146 & 6146A Tubes RCA 6146 & 6146A Tubes. One of each, tested with a Dan Nelson calibrated TV-7B/U tester at 65/35 (6146A) and 56/35 (6146), where 35 is minimum good or 60%. 182 (6) Various Tubes, ER-201A, 807's & 6JS6C's (6) Various Tubes, ER-201A, 807's & 6JS6C's. The 807's test good. The 6JS6C's were untested and the 201A globe tube is a dud for display only. 183 Eimac Tube LOT, 4CX350's, Y-506's, and more Eimac Tube LOT, 4CX350's, Y-506's, and more. You are bidding on used tubes in this lot. All filaments test good, however, no further testing was done. They are: (4) 4CX350A (3) 4CX350F (2) 4CS250 (2) 4X150A (4) Y-506 (3) Misc. socket parts, SK-606,... 184 (27) Misc Tubes (27) Misc Tubes, as shown. Some tubes may not actually be from the manufacturer on the box. However, after checking a random sample, the tubes were the numbers shown. Also, most of the sample tested average or above average on a Dan Nelson calibrated... 185 (7) Milspec 5814A (12AU7, ECC82) Tubes, NOS GE (7) Milspec 5814A (12AU7, ECC82) Tubes, NOS. These tubes were manufactured in 1963 by GE for the USAF. They are NOS and test excellent with no shorts. Testing was done with a Dan Nelson calibrated TV-7B/U tester with the following results: 100/56, 9... 186 Telefunken EF86 (NOS), ECC88 & 6DJ8/ECC88 Tubes Telefunken EF86 (NOS), ECC88 & 6DJ8/ECC88 Tubes. You are bidding on 3 tubes, one is a NOS Telefuken EF86 with the original cellophane still on the package. The other Telefunken is and ECC88 and the bottom of the box is missing an end flap. The last t... 187 Western Electric 417A & Raytheon 5842 Tubes Western Electric 417A & Raytheon 5842 Tubes. One of each, both test very good. Testing was done with a Dan Nelson calibrated TV-7B/U tester with the following results: Western Electric 417A, 35/15 Raytheon 5842, 28/15 where 15 is minimum good, or 6... 188 Amperex PQ 7119 & Sylvania 5654 Tubes Amperex PQ 7119 & Sylvania 5654 Tubes. Both tubes were tested with a Dan Nelson calibrated TV-7B/U tester with the following results: Amperex PQ: 53/40, 53/40, where 40 is minimum good or 60%. Made in Holland. Sylvania 5654: 37/22, where 22 is mini... 189 (2) Cetron 572B Power Tubes (2) Cetron 572B Power Tubes. Both of these used tubes test very good with a recently calibrated (by Dan Nelson) TV-7B/U tester with results of 57/36 each. Where 36 is the minimum good value. No shorts. The tube pictured on the right appears to have h... 190 Misc LOT of (7) Tubes Misc LOT of Tubes. You are bidding on all 7. 1 - 36MC6 Westinghouse 1 - 6L6GC Westinghouse 1 - 6JS6C Westinghouse 3 - 12JB6 RCA 1 - 6GB5/EL500 Amperex in a Sylvania box All tubes test good or above with a TV-7B/U tester. 191 J-38 Morse Code Key J-38 Morse Code Key, black and brass. Working condition. 192 Heathkit HD-1410 Electronic Keyer Heathkit HD-1410 Electronic Keyer in good working as well as cosmetic condition. Approx. Weight: 3 lbs. Approx. Dims: 8x5x3 193 Heathkit HD-1410 Electronic Keyer Heathkit HD-1410 Electronic Keyer in good working as well as cosmetic condition. Approx. Weight: 3 lbs. Approx. Dims: 8x5x3 194 Heathkit HD-1410 Electronic Keyer Heathkit HD-1410 Electronic Keyer. Missing power cord. The keyer does work, however, the "dits" are stuck and will keep repeating once activated until powered off. Approx. Weight: 3 lbs. Approx. Dims: 8x5x3 195 MFJ Econo Keyer II, MFJ-401D MFJ Econo Keyer II, MFJ-401D in good working condition with manual and original box. You will need to supply your own 12VDC connector and cable. Approx. Weight: 1 lb. Approx. Dims: 8x6x4 196 Eldico EE-2 Electronic Key Eldico EE-2 Electronic Key, in good working condition. There is corrosion evident on the case, however, it is not affecting operation. Includes 1/4 inch phono plug and cable. Approx. Weight: 13 lbs. Approx. Dims: 12x8x7 197 Ameco Code Practice Oscillator Ameco Code Practice Oscillator in working condtion, as shown. Approx. Weight: 3 lbs. Approx. Dims: 7x5x5 198 Alberto Fratinni Brass Deluxe Semi Auto Key, Italy Alberto Fratinni, I1QOD, Brass Deluxe Semi Auto Key, Italy. Superb craftsmanship on this beautiful key, and working just fine. Please see the link above for more information on this hand made Italian key. There is a small bit of wear on the right low... 199 Bencher Iambic Keyer, black base Bencher Iambic Keyer, black base in good working as well as cosmetic condition. 200 Ham-Key, Paddle Keyer & Straight Key Ham-Key, Paddle Keyer & Straight Key both in good working as well as cosmetic condition. 201 TAC "Hole In The Wall" Bug Key, Chrome, CP-810 TAC "Hole In The Wall" Bug Key, Chrome. This Telegraph Apparatus, Co. key is in working condition. The chrome does exhibit some scratches and dings from use. Model CP-810. 202 TAC "Hole In The Wall" Bug Key, Gray, CP-810 TAC "Hole In The Wall" Bug Key, Gray in good working as well as cosmetic condition. Model CP-810, Telegraph Apparatus, Co. 203 TAC Semi Automatic Bug Key, Gray Base TAC Semi Automatic Bug Key with gray base in good working as well as cosmetic condition. Telegraph Apparatus, Co. 204 EF Johnson Speed-X Semi Automatic Key, Black Base EF Johnson Speed-X Semi Automatic Key in good working condition. Some wear to the base, but the chrome looks good, as shown. 205 EF Johnson Speed-X Semi Automatic Key, Black Base EF Johnson Speed-X Semi Automatic Key, Black Base in good, working condition. As shown. 206 Unmarked Semi Automatic Key, Black Base Unmarked Semi Automatic Key, Black, narrow base. In working condition. 207 Les Logan Speed-X 501 Semi Automatic Key, Chrome Les Logan Speed-X 501 Semi Automatic Key, Chrome. Very nice looking chrome key with no apparent pitting. In working condition. Serial number E15. 208 Autronic Single-Lever Paddle Key Autronic Single-lever paddle, produced by Electrophysics in the 1960's. One of the first of its kind. In good to very good condition, with only a paint chip to the left of the word "Autronic" on the top side of the unit, as shown. The link above pr... 209 (4) Straight Keys (4) Straight Keys and EF Johnson Telegraph Key box and manual only. The first key is a Western Electric, missing the spring mechanism. The second key is a Signal key,marked Newark 226, as shown, with wood base, in working condition. The third key is... 210 Misc. Morse Keys and Brochure Misc. Morse Keys and Brochure. Two unusual keys here, as shown. The brass key appears to be a very early telegraph key that would be mounted on a table or base. "Brown Precision Made Keys" fold out brochure included, as shown. 211 Astatic D-104 Microphone Astatic D-104 Microphone in fair to good cosmetic condition. The base and chrome could use a bit of polishing. The connector is an 8-pin DIN and the mic does have the amplified base, as shown. The pin directly opposite the connector key appears to be... 212 Shure 444 Desktop Microphone Shure 444 (?) Desktop Microphone with extendable neck. Good working condition. Since the bottom is missing, I had to guess at the exact model number. 3/8' phono plug included. 213 Shure 404C Microphone Shure 404C Microphone in good working condition. No connector included. Original box and instructions. Approx. Weight: 2 lbs. Approx. Dims: 8x5x3 214 Astatic 10C Microphone Astatic 10C Microphone in good working condition, very nice looking mic! With 8-pin DIN connector. Approx. Weight: 2 lbs. Approx. Dims: 10x3x3 215 Premier Communications PMC-200 Mic & EQ Premier Communications PMC-200 Microphone & Graphic Equalizer. All functionality OK. Mulit-rig connections and cable included for ICOM, Yaesu and Kenwood. Original box and instructions. Approx. Weight: 3 lbs. Approx. Dims: 11x7x7 216 Astatic AST-878DM Amplified Ceramic Desk Mic Astatic AST-878DM amplified ceramic desk mic in good working condition with 8-pin DIN connector. Original box and packing materials. Appears hardly used, if at all. Approx. Weight: 2 lbs. Approx. Dims: 11x8x5 217 Uniden Bearcat BC 147XLT Scanner Uniden Bearcat BC 147XLT Scanner in working condition on weather channel, with power supply. Approx. Weight: 2 lbs. 218 (2) ANDREW 204989-2 Grounding Kit, 7/8" Cable, NOS (2) ANDREW 204989-2 Grounding Kits, 7/8" Cable. New Old Stock, unopened. Approx. Weigth: 3 lbs. 219 (14) ANDREW F1PNF-BH N Female Bulkhead Conn., NOS (14) ANDREW F1PNF-BH N Female Bulkhead Conn. As shown, NOS. Approx. Weight: 3 lbs. 220 (18) ANDREW F1PNM-H N Male Connectors, NOS (18) ANDREW F1PNM-H N Male Connectors. As shown, NOS. Approx. Weight: 4 lbs. 221 (4) ANDREW L5NF N Female Connectors, NOS (4) ANDREW L5NF N Female Connectors. NOS, as shown. Approx. Weight: 4 lbs. 222 (5) F1PNMV2-H N Male Connectors, NOS (5) F1PNMV2-H N Male Connectors, NOS. As shown. Approx. Weight:1 lb. 223 (7) Various ANDREW N Male Connectors, NOS (7) Various ANDREW N Male Connectors, NOS. As shown. 224 (4) ANDREW L4PNF-RC N Female Conn., NOS (4) ANDREW L4PNF-RC N Female Conn., NOS. Ring Flare N Female connectors, as shown. 225 (2) ANDREW 41SP Ver 2, UHF Connectors, NOS (2) ANDREW 41SP Ver 2, UHF Connectors, NOS. As shown. 226 ANDREW L45N & L45W, N Female & Male, NOS ANDREW L45N & L45W, N Female & Male Connectors, NOS. As shown. 227 (30) RADIALL UG 594/U, Right Angle N Conn, NOS (30) RADIALL UG 594/U, Right Angle N Conn, NOS. As shown. 228 Approx. (25) N Conn. M/M Patch Cables Approx. (25) N M/M Patch Cables. Various lengths. as shown. 1-3 ft. Male-Male. 229 (16) N Male to SMC, (9) N Female to SMC 20" Patch (16) N Male to SMC, (9) N Female to SMC 20" Patch Cables, as shown. Milspec RG-223. N Female connector to SMC male connector. All cables approximately 20 inches in length. 230 7 lbs. Misc. RF Connectors, N, BNC 7 lbs. Misc. RF Connectors, some BNC bulkhead, quite a few NOS male N connectors still in packaging, as shown. 231 (4) Weston Panel Meters, NOS (4) Weston Panel Meters, NOS. Approximately 3x3.5 inches each. Three 100 microamp meters and one 500 milliamp meter. As shown. 232 Beckman Instruments Precision Potentiometer Beckman Instruments Precision Potentiometer. As shown. Very good condition. Approx. Weight: 2 lbs. Approx. Dims:6x5x4 233 Kantronics KAM XL All Mode Radio Modem/TNC Kantronics KAM XL All Mode Radio Modem/TNC, as shown. The unit does power on (the display does not illuminate, however, I'm not sure if this is because it needs to be connected to a transceiver). Included are a USB to serial and PS2 to serial cable, ... 234 RCA MI-12161 PA Amplifier RCA MI-12161 PA Amplifier. This unit powers up and draws about 25W. Missing 5Y3 tube. No further testing was done. Approx. Weight: 13 lbs. Approx. Dims: 13x7x7 235 Astron RS-35A Power Supply Astron RS-35A Power Supply in good working condition. Approx. Weight: 23 lbs. Approx. Dims: 11x10x6 236 Astron RS-35A Power Supply Astron RS-35A Power Supply in good working condition. Banana plug jacks were added to the front. IEC power cord is included. Approx. Weight: 23 lbs. Approx. Dims: 11x10x6 237 Astron RS-35A Power Supply Astron RS-35A Power Supply in good working condition, as shown. Please note a few of the heat sink fins on the lower left back are bent. See photos. Approx. Weight: 24 lbs. Approx. Dims: 11x11x6 238 Astron VRM-35M Power Supply, Rack Mount Astron VRM-35M Power Supply, , Rack Mount, in good working as well as cosmetic condition. Variable amperage as well as voltage settings. Output max is 15VDC and 35-40 amps. (No, it isn't missing any transistors. Only 6 total in this supply). Approx.... 239 Astron RS-20S Power Supply w/Speaker Astron RS-20S Power Supply w/Speaker. In good working condition. Speaker tests ok as well. Approx. Weight: 20 lbs. Approx. Dims: 10x9x6 240 Kenwood KPS-12 Power Supply Kenwood KPS-12 Power Supply. No output, but transformer OK. There is filter voltage on series pass transistors on heatsink. The fuse holder is broken. Approx. Weight: 20 lbs. Approx. Dims: 11x8x6 241 Heathkit HP-23 Power Supply Heathkit HP-23 Power Supply in good working condition. Please note the plug on the end of the power cord is missing. Approx. Weight: 14 lbs. Approx. Dims: 9x7x5 242 Kenwood PS-30 Power Supply Kenwood PS-30 Power Supply. In good working condition. Approx. Weight: 20 lbs. Approx. Dims: 13x8x7 243 Kenwood PS-30 Power Supply Kenwood PS-30 Power Supply in good working condition, as shown. Approx. Weight: 20 lbs. Approx. Dims: 13x7x6 244 Kenwood PS-50 Power Supply Kenwood PS-50 Power Supply, works well. Using a 200W load, power consumption was about 280W. Approx. Weight: 16 lbs. Approx. Dims: 12x7x4 245 Arrow 146-4S 4 Element 144-148 MHz Yagi NOS Arrow 146-4S 4 Element 144-148 MHz Yagi NOS. All items appear to be present, NOS, never used. As shown. Approx. Weight: 4 lbs. Approx. Dims: 58x4x4 246 Front Faceplate for Gonset GSB-100 Transmitter Front Faceplate for Gonset GSB-100 Transmitter, including a working, original meter. Approx. Weight: 2 lbs. Approx. Dims: 19x10.5 247 Front Faceplate for Alpha 76A Amplifier Front Faceplate for Alpha 76A Amplifier, as shown. Approx. Weight: 2 lbs. Approx. Dims: 17x7 248 Various Electric Radio Magazines, 1997-2009 Various Electric Radio Magazines, 1997-2009. These ER Mags are in good condition, some issues are showing wear more than others, but they are complete. I did find one issue that had the back cover address label cut out (Dec. 2000). Included are: 1... 249 February 1924 QST Magazine February 1924 QST Magazine. As shown, in protective plastic bag. 250 Early Utah Wood Table Speaker Early Utah Wood Table Speaker. I was unable to find a model number for this unit, but it is in good condition, with scuffs and scratches, as shown. The driver tests at about 1.3k ohms. Approx. Weight: 8 lbs. Approx. Dims: 15x11x8 251 VHF/UHF Duplexer & Band Pass Cavity Filter VHF/UHF Duplexer & Band Pass Cavity Filter. Untested. See photos for models and serial numbers. Approx. Weight, total: 23 lbs. Approx. Dims: 19x5x8 and 19x5x6 252 Home Brew Amplifier w/ BIRD Rack Mount 4527 Home Brew Amplifier w/ BIRD Rack Mount 4527 Wattmeter. Here's another home brew amp built by the SK from Vermont. I'm guessing this is one of his early creations. The power supply and the RF deck are separate units that just set on top of one anoth... 253 Amp Supply Co. LK500ZC, parts/restore Amp Supply Co. LK500ZC, parts/restore. As shown. Manual included. Please note that some of PC boards are wired in, but not physically attached to the chassis. Cover is not physically attached to the chassis, as well. Approx. Weight: 50 lbs. Approx. ... 254 MRC S3007-01 Amp RF Deck, parts/restore MRC S3007-01 Amp RF Deck, parts/restore. This appears to be the RF deck from a Materials Research Corp., amplifier. Cover is not attached to chassis. Everything as shown. Approx. Weight: 30 lbs. Approx. Dims: 17x16x9 255 38" Rack on Casters 38" Rack on Casters, very nice black wrinkle finish with hinged top and back. 18.5" wide from mounting hole centers. 15" deep. As shown. 256 54" Rack on Casters w/Power Strip 54" Rack on Casters w/Power Strip. Black. Open frame, 18.5" wide from mounting hole centers. Power strip, switch on front. As shown. |
Photo Gallery
|
|||||
---|---|---|---|---|---|
|