29th Annual Classic Air Works Auction
Previous Page Listing ID#: 60624

Auction Location

Millersburg, OH 44654
Auction Dates and TimesSALE IS COMPLETED
Thursday Feb 15, 2018 Completed
Friday Feb 16, 2018 Completed
Saturday Feb 17, 2018 Completed
Auction Type
 Live Auction 
Company Information
Air Works Auction

Contact: Air Works Auction Office
Phone: 3303179259
Email: eli@airworksauction.com
Website: www.airworksauction.com

GoToAuction.com ID#: 2877
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Cash Day of Sale. Checks will be accepted with proper ID. All items are sold “As Is” unless guaranteed by the seller. Air Works Consignment Auction Ltd. acts only as an agent of the seller and assumes no responsibility for the seller statements. Buyers are encouraged to inspect items before bidding on them. All items are to be removed from premises by purchaser. In all disputed bids the decision of the auctioneer on stand is final. The sale price is the price recorded by the clerk on the clerking sheet at the time of the sale. If you question this price we will endeavor to check with the clerk and the auctioneer. However, if they don’t recall the item or a difference in the price, the price on the clerking sheet shall stand and you are expected to pay for the item. A Buyer’s Premium (see all rates) will be added: BUYER'S ADMINISTRATION FEES (AKA BUYER'S PREMIUMS) Standard Buyer's Administration Fee/Buyer's Premium - 5% CHECK BACK FOR ONLINE BIDDING BUYERS' PREMIUM If you purchase an unannounced damaged item, or the wrong item, call it to the attention of the auctioneer immediately. Purchaser assume responsibility for items at time of purchase (i.e., when the auctioneer declares the item sold.) Do not leave items unattended. When an item is sold the buyer is responsible for it, including damage and theft. ITEMS LEFT ON THE LOT 10 DAYS AFTER SALE WILL BE RESOLD OR DISPOSED OF. Be sure the clerk has your CORRECT BUYER NUMBER WHEN YOU MAKE A PURCHASE. Please only pay for your items. Pay Procedure: Pay in Auction office in Main Building. Remember, you are to pay for all purchased items before you leave the auction area. Check Out
Listing Information

29th Annual Air Works Consignment Auction

3 – Day Auction

GPS Location: 8076 SR 241 Millersburg OH 44654 From U.S. 30 take Kidron Rd. South for 9.2 Miles than turn right onto St. Rt. 241 for 3.8 Miles destination is on the left. From Interstate 77 take exit 83 onto 39 west toward Sugarcreek for 18 Miles turn right on County Rd. 77 North for 4.9 Miles destination will be on the right. Signs will be posted.

 Thursday Feb. 15th at 10:00 AM with 2 Auction Crews

Friday, Feb. 16th at 8:30 AM with 15 Auction Crews

Saturday, Feb. 17th at 8:30 AM with 12 Auction Crews

 Heavy Equipment * Rolling Stock * Sawmill & Pallet Equipment * Logging Equipment * Power Units * Woodworking * Metalworking * Antiques & Collectibles * Miscellaneous Industrial Tools & Equipment

Heavy Equipment Sells Saturday, Feb.17th 

Cat Grapple 525 Skidder w/Winch;  1999 Kobelco SK130LC Excavator w/Quick Coupler;  2009 JCB 520-50 Telehandler, 2250 Hrs. w/Perkins 4.4 Diesel;  Cat IT18F Wheel Loader W/Forks;   2012 Cat 262C Skid Loader, Cab, w/Heat/Air, 2 Speed, Hi-Flow, 1500 hrs;  Cat D3B Dozer w/6 way blade; 1986 Snorkel SLA35 Scissorlift, 1670 hrs. 35’ reach; PJ 30’ Gooseneck Trailer, Low Profile, Tandem Axle W/Electric Brake, Dual Tires; Cat D5 Dozer; Cat 950 Loader; 35 Ton King Low Boy Trailer; John Deere 770 Tractor W/Yanmar Diesel, 1100 hrs.;  2017 Stealth Gooseneck Trailer, 8.5’ x 32’, GVWR12000, New Condition;   Clark Battery Hand Forklift;  Wesco Barrel Lift;  Presto Hyd. Lift;  Semi Tractor Fuel Tanks;  Forklift Forks;  Allis Chambers 12,000 lbs. Lift;  Hyster 12,000 lb. Lift;  Clark 20,000 lb. Lift;  1994 Wabash Truss Truck;  2-Toyota 7FGU25 Forklifts w/Triple Mast, Side Shift, Hyd. Forks, L.P. Gas;  Toyota 8FGU30 Forklift w/Double Mast, Side Shift, L.P. Gas;  Toyota 8FGU30 Forklift w/Triple Mast, Side Shift, L.P. Gas;  2007 JLG 4394RT Scissor Lift, 1500 lb. Lift, Dual Fuel, 1325 Hrs;  Air Powered Forklift;   1999 Dodge 1-ton Ram 3500 Diesel Truck, Spray Foam Trailer fully equipped w/Graco E30 spray foam reactor also 200’ of heated hose & tools;  Like New 2014 Tandem Axle Cargo Trailer w/Complete Model REV5-14000 Spray Foam System w/Generator & Compressor;  2000 Vermeer V5800 Trencher w/60 HP Cummins, All Wheel Steer;  Clark CCX30E 5000 lb. Diesel Forklift w/48” Forks, 8472 hrs;  2017 FDU25 4800lb. Diesel Forklift w/42” Forks, 302 hrs;  Nissan 4200 lb. LP Forklift w/48” Forks & non-chalking tires;  TCM FGU25 5000 lb. Gas Forklift w/48” Forks, 9008 hrs;  2003 Subaru Legacy Automobile, 187,506 miles;   Hyster 12,500 lb Forklift w/Perkins Diesel, Runs Good;  Toyota 7FGU32 Forklift, 12,700 hrs;   JCB 212 Loader, 70 HP Diesel, 4WD w/quick attach & 3 pt blade;  John Deere 450C Dozer w/6 way blade, 200 hrs on engine rebuilt;  Tigercat 240B Knuckleboom Loader, 100 hrs on engine rebuilt;  Kobelco SK60 Excavator;  Genie GTH644 Telehandler, 6500lb;  International TD15C Dozer;  Timberjack 230A Log Loader w/Knuckleboom;   Case 850C Dozer w/Forestry Package, 80% UC Works Good;  Case 850K Dozer w/Forestry Package;  John Deere 444H Loader w/Rebuilt Engine;  1988 Case 580K 4 x 4 Backhoe, Works Good;  Bobcat 863 Skid Steer w/Duetz Diesel, 6207 hrs;  Case 850K Dozer w/Forestry Package, W3 Allied Winch, 6415 hrs;  John Deere 444H Loader w/Rebuilt Engine, Foam Filled Tires;  Cat 518 Log Skidder;  Cat 640E Log Skidder;  

Power Units & Compressors Sell Saturday, Feb. 17th

Saylor Beall Screw Air Compressor 480V – 3ph; Lima Mac 20kw Generator, Like New; Iveco 100 HP Diesel, w/clutch, low hrs;  27 HP Lister Diesel Engine;  Cummins 3.3 – 80 Hp Power Unit W/Clutch; John Deere 4039 Power Unit W/Clutch; Detroit 50 series 320 Hp Power Unit W/Clutch; John Deere 6059T Power Unit; John Deere 4045 Turbo Diesel, 300 hrs;  Portable 100kw Genset w/Cat D334 Engine;  Portable 200kw Genset w/Solar Turbine Engine;  Sullair Filter;  Hyd. Power Pack;  900 kw Genset Marathon w/V16 Detroit Diesel Engine;  Onan 45kw Genset, Engine Needs Rebuilt;  Onan 70kw Genset w/Ford Engine, Needs Rebuilt;  ATLAS-COPCO "GA-37" Rotary Screw Air Compressor, 50 HP - 216 ACFM at 125 PSI, single-stage rotary screw air-end & totally self-contained;  Detroit power unit w/clutch and hydraulic pump;  Atlas Copco GA-37 Screw Compressor, 30,000 hrs.; Ford 6 cylinder 82 HP Diesel w/clutch;  Lombardini 11 Hp Diesel, 1800 rpm;  Lombardini 9.5 Hp Diesel, 1800 rpm;  Isuzu 4BT rebuilt 130 HP Diesel w/clutch;  80 HP John Deere Diesel w/Clutch, 27,950 hrs

Pallet Shop, Sawmill Sells Friday & Saturday Feb. 16th & 17th 

Cleerman 36” Carriage and 50 HP Drive w/Pantograph, Track & all Controls; McDonough 62 M -167  62’ band head rig w/meadows #2, 3-head block hydraulic carriage w/computer set works on 48’ track, excellent condition;  Meadows 4X36 edger;  Mellot 10’ x 30’ live deck;  Reckart 26” blower;  32” x 29’ belt conveyor;    Hydraulic cooler with 70 gallon tank;  2016 Zimmerman Portable Bandmill W/31 Hp Vanguard Engine Mounted on Trailer;  2014 Norwood Lumber Pro HD36 Bandmill;  Like New Morgan Single Head Resaw;  1980 Frick Model 3 Edger; Shop Built Slab Cut Off Saw;  Brewco Up Cut, Cut Off Saw;  Rechart 42” Blower;  Reckart Log Turner, Good condition;  Cornell 6 x 42 Edger w/75 HP Motor;  New 2018 EZ Cut Model 2036 22 HP Portable Bandmill on trailer package, includes Debarker;  Albany 72” Band Head Rig;   Head Rig w/31” Wheel for 2” Band w/Frick Manual Feed Works;  New 2018 Model BMS500, CBN Sharpener, Belt Driven;   TimberKing Bandmill, Fully Hyd, 30 HP gas Kohler, 600 hrs;

 

Metalworking Equipment Sells Friday, Feb. 16th

 Delta 12” metal cutoff saw, air powered;  Warner Swasey Metal Lathe w/lots of Tooling, End Mills, Reamers, Bench Anvil;  Clausing 15” x 48” Engine Lathe;  Lodge & Shipley 14” x 36” Lathe;  Key Setter Holder;  5 Ton Bench Press;  Bridgeport Milling Machine;  Do All 36-R Bandsaw;  Tri-onics Hangman CNC Mill;  Tanniwitz Bandsaw;  Cincinnati Mill;  Norman Mill;  Metal End Mill;  Cyril Bath Mechanical press brake, 150 Ton X 10 ft, 8 Ft between housings, good working condition, 230v 3 ph;  Airco 150 Amp Tic Welder;  3 Head Floor Model Drill Press;  Air King Air Filter;  Ruger Hand Lift;  Presto M466 1000 lb. Lift;  2 Pallet Jacks;  Warner Swasey #5 Turret Lathe;  Potable Dollys;  Electric Jacks;  Kolee Horizontal Grinder;  Air Operated Press Brake;  Welding Table;  C Frame Press;  Gordon Grinder;  Buffalo Drill Press;  Gardner #1 Tool Grinder Large Cylinder;  Tip Hoppers; 

Woodworking Equipment Sells Friday & Saturday, Feb. 16th & 17th

Table Saws   New 2016 Felder K540 10” Table Saw W/10’ Sliding Table, 230v; New 2017 Oliver 4016 10” Table Saw, 230v;  Powermatic 66 10” Table Saw, 230v;  Delta 10” Unisaw w/50” Vega Fence, Hyd. Driven; Lobo 12” Table Saw w/50” Vega Fence 220V -3ph;  Delta Table Saw w/sliding table, belt driven;  Extrema XG-12A Gang Rip Saw, 480v;  Mereen Johnson 424 Gang Rip Saw,  24" dip chain fixed arbor gang rip saw;   Diehl SL55 Straight Line Rip Saw;   Robland 10ft sliding table saw #3200;  Dayton Table Saw;  Robland Sliding Table Saw w/Fence;  Griggio Model SC-3000 10ft sliding table saw 230v 3-ph;  Delta 10: Table Saw;  SCMI Z.32 CNC Panel Saw Good Condition;

Cutoff Saws   2014 Oliver 5025 18” Upcut Saw W/Slide Roller Table;  Delta 10” Miter Saw, air powered;  Omega MEC-300ST 12” Chop Saw, air powered;  Original Radial Arm Saw;   Dewalt Model GE67 Radial Arm Saw;  Delta/Rockwell 12” Radial Arm Saw, 2HP 230v 3ph;    Delta/Rockwell 14” Radial Arm Saw 3HP 220v 3ph;   Dewalt 10” Radial Arm Saw 1½ HP;   Craftsman 10” Radial Arm Saw 2.5HP 120v;  

Bandsaws   Mini Max SCM-6100 16” Bandsaw, 230v;  M2 Project Automatic Bandsaw, w/new hydraulic/air setup; 

Planers   Like New 2016 Stonewood ST20 20” Spiral Head Planer, 230v 3ph;  2010 Northtech 43” 3 Head Planer/Sander, 300 series hyd. driven;  Bridgewood BW-200P 20” Planer;  Powermatic 15’’ Planer;   (2)- Buss 44 Single Surface Planer 30"  20 HP 3,600 RPM;   Rockwell 22-503 Planer w/Helixhead;   Delta 18” Wedge Bed Planer, 3 Knives, 5HP 230/460v 3ph;   Powermatic 221 20” Planer 10HP 220v 3ph;   Powermatic Planer;  Buss 44 30” Planer;   Leadermac 2008 18” Planermac 445 Planes Top & Bottom;   Delta 22-503 24” Planer;

Jointers   Jet DB-8 8” Jointer W/Long Bed, 110v;  Grizzly A1018 Jointer;  Grizzly 8” Jointer W/Spiral Cutter Head;  Delta DJ20 8” Jointer, like new;  American  30" x 90" Jointer Belt Driven New Knives;  American 30” Jointer Belt Driven;  Famous 12” Jointer 4HP 220v;  

 Shapers   New 2017 Oliver 10047 1¼” Spindle Shaper, 230v;   Powermatic 27 1¼” Spindle Shaper, Hyd. Driven;  Robland T120 1¼” Spindle Shaper, hyd. Driven;  Lobo SP910 1¼” Spindle Shaper, hyd. Driven;  Grizzly ¾” Spindle Shaper;  Accura 1¼” Spindle Shaper W/Sliding Table, Line Shaft Driven;  Robland T-120, 1 ¼” Spindle Shaper;  

Moulders   Wadkin XE220-6 6 Head Molder, 460v; Brandt KDF780 Edge Bander, 230v; 2010 6000 cfm Dust Collector W/Indoor Bags;  Weinig 5 head molder w/cable clutch & flooring cutters;  Weinig 22N Molder, 480v; Anderson NC-1515PT CNC Router; Leadermac Model LMC 518S Smartmac 7" 5 Head Moulder 230 v  3-phase (1-owner/ Great Condition);   

Lathes   Powermatic V.S. Wood Lathe Model 90 230V three phase;  Haas VF4 with Rotary Table;   Broadhead Conover Wood Lathe w/Hydraulics;   Powermatic Model 90 VS Wood Lathe 230v 3ph;   Garret Lathe 1HP 220/440v 3ph, 8 Spindles; 

Sanders  New 2017 Oliver 6305 6” x 89” Edge Sander, 110v; New 2017 Oliver 5555 Double Head Drum Sander, 230v;  Grizzly Double Head 36” Drum Sander;  Stroke Sander;  Jet 22/44 Oscillating Drum Sander;  Bow Sander, New Condition;  MVM Spindle Sander, air powered;  Nash 85 Chairback Sander, w/new hydraulic setup;  Saddle Seat Sander;  Down Draft Table w/2 3M air sanders, vac ready;  Denray 28” x 60” Down Draft Table, 230v;  

Wide Belt Sanders   Timesaver Model 137-2, 37” double head wide belt sander w/air tracking;     AEM/SCM CL130 52” 2 Head Widebelt Sander;  1978 DMC 37” Double Head Wide Belt Sander, Hyd. Driven

Boring Machines   New 2017 Conquest CON-13 13 Spindle Manual Line Bore Machine, 110v;   MVM 13 Spindle Line Bore Machine, Air Powered;  Ritter R-46 Double Head Line Bore Machine’ 230v;  Newton BA-600 Boring Machine, hydraulic driven;  Holytek CDH6 Multihead Boring Machine;

Mortise & Tenoners    Northtech NT152 Single Head Tenoner, 230v;  Greenfield Mortise Machine; Hermance Tenon Machine;  Balestrini Tenoner; Balestrini Mortiser; D.A. Hochstetler & Sons Double End Tenoner W/Air Clutch; General International Mortiser;   2004 Dyna Tenon Machine, line shaft ready;  Gabbiani Double End Tenoner;  

Edge Banders   Edge Banding Tape Trimmer, top & bottom;  Holz-Her Sprint 1310-1 Single Sided Edgebander;     SCM Selecta 12F Edgebander 230v 3ph; 

Inverted Routers   Pin Router;  SCMI Pin Router;   CR Onsrud Model 3621 inverted Router, hydraulic driven;  Onsrud 3025 Inverted Pin Router; 

Dust Collectors   Jet Dust Collector, 2 HP 230v; 1999 Honeyville EFR-86-8 dust collection system, 480v 3ph;  (2) Bag house dust collector’s 64 bags per unit;  Delta Model 50-875  Highest airflow 3-speed air cleaner;    Torrit Dust Collector DMC-D2, 7½ Hp 230v 3ph;   2 = 64 Baghouse Air Filters;  Grizzly Portable Dust System w/Hydraulics;  JET JDP-1 Single Bag Dust Collector,110v;   2 Large Dust Collection Systems, 40 HP & 50 HP w/bag houses & duct work;

 

Drill Presses   2004 Dyna Drill Press, line shaft ready;  Delta Model 17-965 16 ½” Drill Press, air powered; ARO Auto Drill;   Cummins Mack CM0017 5 Speed Drill Press w/5/8” chuck; 

Dovetailers   2001 Omeg 750 Single Spindle Dovetailer W/Diamond Tooling, 230v;  Dodds 10 Spindle Dovetailer, mechanical clamps, line shaft driven;  Dodds Model SE25-CNC 25 spindle CNC dovetailer;  2013 Northtec Model DTM-16A-DS Dovetailer, 230v 3ph;  Powermatic DT-45 Dovetailer;  Wysong & Miles Model #601 15  Spindle Dove Tailer;  Wysong & Miles #600 15 Spindle Dovetailer;    

Door & Drawer Clamps   JLT 79K-6 Door Clamp, air powered; JLT 190B Drawer Clamp, air powered; JLT Door Clamp, 26” x 56” capacity;  JLT 190A Drawer Clamp; Taylor 48 x 84 Door Clamp;  Ritter Model R-450V Raise panel door assembly system;   Ritter Drawer Box Clamp; 

Clamp Carriers   Taylor 40 Section Clamp Carrier, 36” Clamps, Semi Automatic;  Taylor Clamp Wheel 10 section manual clamp wheel  8-1/2' wide, 32" clamps Manual rotation and tightening;   30 section Taylor Clamp Carrier;  Taylor Clamp Carrier, 10 Section, Manual;  Taylor Clamp Carrier, 20 section, Air operated;   

Misc. Woodworking    JDS Multi Router W/Sioux Air Motor; Delta Model 40-601 Scroll Saw, air powered ;  Hawg Air Shop Vac;  EZ Ball 260 Space Ball Inserter;   Norfield PRO Prehung Door Machine air/electric; New Jet 30” Micro Guide Fence & Rail;  Challenger 75 HP Horizontal Scrap Grinder,  Model CH300-4055-S, new in 2003, 39" wide opening, 73 HP, 3/4" baffled screen;  BIESSE ROVER 20 CNC MACHINING CENTER 37" X 113" Working Capacity;  Black Bros Pinch Roller 98" capacity pneumatic pressure;    Battery Lift Straddle Stacker;  Doucet Conveyor CMS-24-5-G 24” x 12’;  Stair Assembly Table/Press;  1997 Pneumatech AD400 Air Dryer, 400CFM, 2HP 440v 3ph;   Challenger 75HP Horizontal Scrap Grinder;    Retech RG32/20U Wood Grinder;  Delta 50-875 3 Speed Air Cleaner;  Biesse Rover 20 CNC Machining Center;  Gannomat 280 Type 281 Drilling & Dowel Machine;  Grizzly 3 Roll Power Feed;  Wesco Pallet Jack;  Kreg Foreman Pocket Hole Machine;  Mepla Hinge Boring/Press;  Superstop Rail & Stop System;  Tanniwitz U Variety Saw 5HP 3ph 220v;  Brainard Steel Banding Cart; 

Construction Tools & Equipment Sells Friday & Saturday, Feb. 16th & 17th

Klutch Portable Cement Mixer, electric powered;  1999 Somero S-100 Concrete Laser Sreed;  Dewalt Table Saw w/ox Air Motor;  Makita 36 volt Chain Saw;  Mason Tools Dispersal Mortar Mixers, Mason Saws, Scaffolding, Truck Tool Boxes w/lots of Hand Tools;

Building Materials & Sheds Sells Saturday, Feb. 17th 

We usually have several small storage buildings as well as lots of miscellaneous lots of lumber and building materials. 

Miscellaneous:  

200 sections 4’ x 5’ Lozier store shelving; Consew 205-RB2 Walking Foot; Juki LH-1152-4 Double Needle w/1” right angle binder; Juki DLN 415-5; Juki LK-1852 Bar Tacker; Eastman Cloth Drill; KM Cloth Cutting Machine; Magnum Energy RD2824 Inverter System, 4 batteries, 2 solar panels  (Hi-Lite Item); Sun Tracker 16’ Pontoon Boat w/35 hp motor; Complete Spray Foam Rig in a Trailer; Aluminum Truck Cap W/Tool Box 69¾” x 71¼”; Stihl Chain Saw; Husgvuarna Chain Saws, New & Used; 2015 29 hp Honda, Natural Gas Motor; 2010 Yamaha 6300 Watt Generator, 3315 Hrs. w/auto stop/start system;  New 5.5 Hp Honda Motor, SS Exhaust; 700 – 14” x 18” x 42” double wall cardboard boxes; 2000 Misc Cardboard Boxes; $15,000.00 of LED Corn Bulbs, Electric & 12 Volt, 4 different watts;  Landa Pressure Washer;  Honda Floor Buffer;  Commercial 2 door true freezer;  Groen Industrial Oven;  Clipper Masonry Saw;  Large Transformer;  Gear Boxes;  Air Dryer;  Blue M Industrial Oven;  Riveter;  Paper Shear;  Paint Shaker;  Industrial Blowers;  Lapping Machine;  Stainless Tanks;  Steel Boxes;  40’ Steel Trusses;  5’ x 16’ SS Evaporator Pan;  200 Gallon Air Tank; 6 - Honda EU2000 Generators, New Motors, Excellent Condition; 

Genaral Miscellaneous Consignments Sells Friday & Saturday, Feb. 16th & 17th

Most items valued over $500.00 will be listed separately, but again this year we’ve got 1000’s  of small items, too many to list, air compressors, generators, pressure washers, pallet jacks, electric motors, dust collecting systems, chop saws, electric & air tools, wrenches & socket sets, clamps, lights, chainsaws, ladders, carpenter, mason, and concrete tools, shelving, work benches, fasteners, extension cords, air hoses, wiring, duct work, wagons, wheelbarrows, garden carts, wheels, lineshafts, garden tools, plus much much more

Add On Consignments added on week of Jan. 15

Cat Grapple 525 Skidder w/Winch;  Ford 82 HP 6 Cylinder Diesel w/Clutch;  Lombardini 13 Hp Diesel, 1800 rpm;  Lombardini 9.5 Hp Diesel, 1800 rpm;  Powermatic Table saw w/hydraulic motor;  Delta Table Saw w/Powermatic Fence, hyd. Driven;  Delta 10” Table Saw W/Unifence;  Powermatic Table Saw w/52” Fence;  Diehl Inline Rip Saw, electric 3 ph, hyd. Feed;  Whirlwind Upcut Saw;  Dewalt 12” Chop Saw;   Dewalt 12” Compound Sliding Miter Saw;  Craftsman Radial Arm Saw/air motor;  Delta 10” Bandsaw;   Shopfox 2 HP Shaper w/outfence;  Shopfox 2 HP Shaper;  Shopfox 2 HP Shaper w/Power Feed;  Delta 5HP Dust Collector;  Shop Fox 2 Bag Dust Collector;  Nash 88 Spindle Turning Sander, 3 HP 3ph 220v;  Wysong/Miles 315 Edge Sander 2 HP 3ph 220/440;   Glue Spreader;  Spray Booth;  Devilbiss 3 Gallon Pot w/Gun;  Devilbiss 5 Gallon Pot w/Gun;  Devilbiss 10 Gallon Pot w/Gun;  Binks 10 Gallon Pot w/Gun;   Kauffman knife hinge slot cutter;  Misc. pulleys & lineshafts;  1999 Kobelco SK130LC Excavator w/Quick Coupler;  24” Bucket;  New 2018 EZ Cut Model 2036 22 HP Portable Bandmill on trailer package, includes Debarker;  1999 Kobelco SK130LC Excavator w/Quick Coupler;  

 Add On Consignments added on week of Jan. 22

1999 Dodge 1-ton Ram 3500 Diesel Truck, Spray Foam Trailer fully equipped w/Graco E30 spray foam reactor also 200’ of heated hose & tools;  Crown 5200 Series 5000 lb. stand on forklift w/charger;  2 – Crown 8000 lb. Battery Pallet Jack w/chargers;  Grizzly Wood Lathe w/Vega Copy Head;  Grizzly 2 Bag Dust Collector;   Lockformer Sheet Metal Roll former;  Vermeer RT100 Walk Behind Trencher;   Thermo King 35 HP Motor w/Stub Shaft;  Isuzu 35 HP Motor w/Clutch & Murphy Shutdown;  2009 Grizzly 15” Planer, Lineshaft Ready;  Craftsman 8” Planer Moulder, Lineshaft Ready;   2000 Vermeer V5800 Trencher w/60 HP Cummins, All Wheel Steer;   Lumber Tiger 10” Sawdust Blower;  Newer Shop Made Cutoff Saw w/Table;  24” x 24’ Conveyor Belt w/Gearbox;  2012 Cat 262C Skid Loader, Cab, w/Heat/Air, 2 Speed, Hi-Flow, 1500 hrs;  Butler 18’ Tilt Trailer, Tandem Axle, Electric Brakes;   Onsurd Pin Router;   2003 Yale Forklift, LP Gas, 3750 lb. 3 Stage;  2004 Amaze N Toe Single Axle Trailer;  Miller 5 axis Robot and Controller;  Betco Walk Behind Shop Sweeper;  Delta 16½” Drill Press, Air operated;  2017 Like New Sand Flee Portable Drum Sander;  Kubota Diesel/Winco Genset Model D905 8,000 watt Generator on Slide;  2017 Sand Flee Portable Drum Sander, 110v;  Delta 16½” Drill Press, Air Opereated;  Vintage McCormick Stationary Wire Baler;  Frick O Sawmill, 48’ All Steel Rail w/4 Head Manual Carriage;  Morgan 6 x 42 Edger;  Jacobson 2410-315 Hammer Mill;  Husky Pro Compressor on 80 Gallon Tank, 12.6 cfm, 2 Stage, 230v 1ph;  Lincoln 150amp Welder w/Leads;  Chicago 10’ Metal Brake & Stand;  Grizzly Metal Corner Notcher on Stand;   Clark CCX30E 5000 lb. Diesel Forklift w/48” Forks, 8472 hrs;  2017 FDU25 4800lb. Diesel Forklift w/42” Forks, 302 hrs;  Nissan 4200 lb. LP Forklift w/48” Forks & non-chalking tires;  TCM FGU25 5000 lb. Gas Forklift w/48” Forks, 9008 hrs;  40 KV TV Extension Swivels;  8000 Pairs KLN Full Extension Drawer Slides;  20,000 Twin Wheel Furniture Casters 1¾“, 2”, 2¼“ & 4”;   50 Gallon Drums w/Food Grade Lubricant Oil;  2003 Subaru Legacy Automobile, 187,506 miles;   Hyster 12,500 lb Forklift w/Perkins Diesel, Runs Good;  Toyota 7FGU32 Forklift, 12,700 hrs;   JCB 212 Loader, 70 HP Diesel, 4WD w/quick attach & 3 pt blade;  Weatherhead T420 Hyd. Hose Crimper & Dies;  Albany 72” Band Head Rig;  2 Large Dust Collection Systems, 40 HP & 50 HP w/bag houses & duct work;  Head Rig w/31” Wheel for 2” Band w/Frick Manual Feed Works;

 

 Add On Consignments added on week of Jan. 29

 John Deere 450C Dozer w/6 way blade, 200 hrs on engine rebuilt;  Tigercat 240B Knuckleboom Loader, 100 hrs on engine rebuilt;  Isuzu 4BT rebuilt 130 HP Diesel w/clutch;   Kobelco SK60 Excavator;  Genie GTH644 Telehandler, 6500lb;  International TD15C Dozer;   New 2018 Model BMS500, CBN Sharpener, Belt Driven;  12” Single Arbor Gang Rip;  2009 Accuform Sliter w/4 AM air motor;   Jeffrey 12” hammermill hog;  2013 Compost Tumbler;  2012, 2-27 HP Kawasaki twin cyl. natural gas motors w/hyd. Pump & tank;  8- 1½ HP hyd. Motors;   New Master Mill Up Cut Saw;  1” to 2” open end wrenches and large sockets;   80 HP John Deere Diesel w/Clutch, 27,950 hrs;  TimberKing Bandmill, Fully Hyd, 30 HP gas Kohler, 600 hrs;  ;  New Shed, Vinyl Deluze, 10’ x 16’;  12’ x 20’ Painted Office Shed w/Finished Interior & Electric;  Dog Kennel;  Bacci T4M Copy Shaping Lathe, 220v 3ph;  1978 DMC 37” Double Head Wide Belt Sander, Hyd. Driven;  Door Clamping Table w/ Air Clamps;  Timberjack 230A Log Loader w/Knuckleboom;  Case 850C Dozer w/Forestry Package, 80% UC Works Good;  Case 850K Dozer w/Forestry Package;  John Deere 444H Loader w/Rebuilt Engine;  1988 Case 580K 4 x 4 Backhoe, Works Good;  Bobcat 863 Skid Steer w/Duetz Diesel, 6207 hrs;  Mason Tools Dispersal Mortar Mixers, Mason Saws, Scaffolding, Truck Tool Boxes w/lots of Hand Tools;  Unused 340 Quincy Air Compressor;  Delta 10: Table Saw;  SCMI Z.32 CNC Panel Saw Good Condition;  2005 Sullivan/Paletek D185Q Compressor w/John Deere Diesel that does not run;  Kargo Master Ladder Racks;  600’ x ¾” & 300’ x 5/8” Cable, Very Good Condition;  Case 850K Dozer w/Forestry Package, W3 Allied Winch, 6415 hrs;  John Deere 444H Loader w/Rebuilt Engine, Foam Filled Tires;  Cat 518 Log Skidder;  Cat 640E Log Skidder;  

Add on Consignments added on week of Feb. 5th  Sells Friday & Saturday, Feb. 16th & 17th (Multiple Rings)

 

1995 Pendu Model 4400 Stacker;  Trim Saw, Able to cut 4 length simultaneously;  2003 Peterbuilt 1,130,000 miles, C15 Cat 6NZ 550 HP, Rebuilt Transmission, New Turbo, New Fuel Pump, New Head, New Jack Brake;  2002 Transcraft 53’ Stepdeck, New Tires & Brakes on Rear Axle;  1988 Ottawa Jockey Truck, Model 30, 7,400 hrs;  1999 International 26’ Bed Straight Truck;  Ingersoll Rand Rebuilt 2 Stage Compressor/on 210 Gallon Tank w/New 7 HP Subarau Engine;  Ingersoll Rand Rebuilt 1 Stage Compressor/on 150 Gallon Tank w/3phase Motor;  Dewalt Rebuilt Air Compressor;  2012 International 8600 Semi Tractor, Tandem Axle, 400,000 Miles;  2000 Ford F450 Diesel Service Truck, 170,000 Miles;  1998 Freightliner FL70 12’ Flatbed Truck, 3126 Cat, 6 Speed;  1995 International 9400 Semi Tractor, Tandem Axle, 10 Speed, Cat Engine;  2013 Loadmax Pintle Hitch Trailer w/Hyd. Dovetail;  2006 Trail King 20 Ton Pintle Hitch Trailer w/Air Brakes;  Case 1450 Dozer, Good UC;   Lots of Skid Steer Attachments;  Portable Buildings;  Welding Tables;  Komatsu Mini Wheel Excavator

 

 

  Unloading Schedule

Mon. February 12th from 8 A.M. to 8 P.M.,

Tue. & Wed. February 13th & 14th from 8 A.M. to 4 P.M.

Thursday 8:00 AM to 12:00 by Appointment Only.

 Air Works Consignment Auction Ltd.

P.O. Box 242 Kidron, OH. 44636

Office Phone # 330-749-4362

Office Fax # 330-816-0006

Email office@airworksauction.com

Website www.airworksauction.com

    
Auction License: 2019000069
Photo Gallery















































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Sponsored Links

29th Annual Classic Air Works Auction

Air Works Auction

Air Works Auction

Contact: Air Works Auction Office
Phone: 3303179259
Sale Location
8076 State Route 241 8076 State Route 241
Millersburg, OH 44654
Sale Dates and Times
Thursday Feb 15, 2018 Completed
Friday Feb 16, 2018 Completed
Saturday Feb 17, 2018 Completed
Sale Terms and Conditions
Cash Day of Sale. Checks will be accepted with proper ID. All items are sold “As Is” unless guaranteed by the seller. Air Works Consignment Auction Ltd. acts only as an agent of the seller and assumes no responsibility for the seller statements. Buyers are encouraged to inspect items before bidding on them. All items are to be removed from premises by purchaser. In all disputed bids the decision of the auctioneer on stand is final. The sale price is the price recorded by the clerk on the clerking sheet at the time of the sale. If you question this price we will endeavor to check with the clerk and the auctioneer. However, if they don’t recall the item or a difference in the price, the price on the clerking sheet shall stand and you are expected to pay for the item. A Buyer’s Premium (see all rates) will be added: BUYER'S ADMINISTRATION FEES (AKA BUYER'S PREMIUMS) Standard Buyer's Administration Fee/Buyer's Premium - 5% CHECK BACK FOR ONLINE BIDDING BUYERS' PREMIUM If you purchase an unannounced damaged item, or the wrong item, call it to the attention of the auctioneer immediately. Purchaser assume responsibility for items at time of purchase (i.e., when the auctioneer declares the item sold.) Do not leave items unattended. When an item is sold the buyer is responsible for it, including damage and theft. ITEMS LEFT ON THE LOT 10 DAYS AFTER SALE WILL BE RESOLD OR DISPOSED OF. Be sure the clerk has your CORRECT BUYER NUMBER WHEN YOU MAKE A PURCHASE. Please only pay for your items. Pay Procedure: Pay in Auction office in Main Building. Remember, you are to pay for all purchased items before you leave the auction area. Check Out
Listing Details

29th Annual Air Works Consignment Auction

3 – Day Auction

GPS Location: 8076 SR 241 Millersburg OH 44654 From U.S. 30 take Kidron Rd. South for 9.2 Miles than turn right onto St. Rt. 241 for 3.8 Miles destination is on the left. From Interstate 77 take exit 83 onto 39 west toward Sugarcreek for 18 Miles turn right on County Rd. 77 North for 4.9 Miles destination will be on the right. Signs will be posted.

 Thursday Feb. 15th at 10:00 AM with 2 Auction Crews

Friday, Feb. 16th at 8:30 AM with 15 Auction Crews

Saturday, Feb. 17th at 8:30 AM with 12 Auction Crews

 Heavy Equipment * Rolling Stock * Sawmill & Pallet Equipment * Logging Equipment * Power Units * Woodworking * Metalworking * Antiques & Collectibles * Miscellaneous Industrial Tools & Equipment

Heavy Equipment Sells Saturday, Feb.17th 

Cat Grapple 525 Skidder w/Winch;  1999 Kobelco SK130LC Excavator w/Quick Coupler;  2009 JCB 520-50 Telehandler, 2250 Hrs. w/Perkins 4.4 Diesel;  Cat IT18F Wheel Loader W/Forks;   2012 Cat 262C Skid Loader, Cab, w/Heat/Air, 2 Speed, Hi-Flow, 1500 hrs;  Cat D3B Dozer w/6 way blade; 1986 Snorkel SLA35 Scissorlift, 1670 hrs. 35’ reach; PJ 30’ Gooseneck Trailer, Low Profile, Tandem Axle W/Electric Brake, Dual Tires; Cat D5 Dozer; Cat 950 Loader; 35 Ton King Low Boy Trailer; John Deere 770 Tractor W/Yanmar Diesel, 1100 hrs.;  2017 Stealth Gooseneck Trailer, 8.5’ x 32’, GVWR12000, New Condition;   Clark Battery Hand Forklift;  Wesco Barrel Lift;  Presto Hyd. Lift;  Semi Tractor Fuel Tanks;  Forklift Forks;  Allis Chambers 12,000 lbs. Lift;  Hyster 12,000 lb. Lift;  Clark 20,000 lb. Lift;  1994 Wabash Truss Truck;  2-Toyota 7FGU25 Forklifts w/Triple Mast, Side Shift, Hyd. Forks, L.P. Gas;  Toyota 8FGU30 Forklift w/Double Mast, Side Shift, L.P. Gas;  Toyota 8FGU30 Forklift w/Triple Mast, Side Shift, L.P. Gas;  2007 JLG 4394RT Scissor Lift, 1500 lb. Lift, Dual Fuel, 1325 Hrs;  Air Powered Forklift;   1999 Dodge 1-ton Ram 3500 Diesel Truck, Spray Foam Trailer fully equipped w/Graco E30 spray foam reactor also 200’ of heated hose & tools;  Like New 2014 Tandem Axle Cargo Trailer w/Complete Model REV5-14000 Spray Foam System w/Generator & Compressor;  2000 Vermeer V5800 Trencher w/60 HP Cummins, All Wheel Steer;  Clark CCX30E 5000 lb. Diesel Forklift w/48” Forks, 8472 hrs;  2017 FDU25 4800lb. Diesel Forklift w/42” Forks, 302 hrs;  Nissan 4200 lb. LP Forklift w/48” Forks & non-chalking tires;  TCM FGU25 5000 lb. Gas Forklift w/48” Forks, 9008 hrs;  2003 Subaru Legacy Automobile, 187,506 miles;   Hyster 12,500 lb Forklift w/Perkins Diesel, Runs Good;  Toyota 7FGU32 Forklift, 12,700 hrs;   JCB 212 Loader, 70 HP Diesel, 4WD w/quick attach & 3 pt blade;  John Deere 450C Dozer w/6 way blade, 200 hrs on engine rebuilt;  Tigercat 240B Knuckleboom Loader, 100 hrs on engine rebuilt;  Kobelco SK60 Excavator;  Genie GTH644 Telehandler, 6500lb;  International TD15C Dozer;  Timberjack 230A Log Loader w/Knuckleboom;   Case 850C Dozer w/Forestry Package, 80% UC Works Good;  Case 850K Dozer w/Forestry Package;  John Deere 444H Loader w/Rebuilt Engine;  1988 Case 580K 4 x 4 Backhoe, Works Good;  Bobcat 863 Skid Steer w/Duetz Diesel, 6207 hrs;  Case 850K Dozer w/Forestry Package, W3 Allied Winch, 6415 hrs;  John Deere 444H Loader w/Rebuilt Engine, Foam Filled Tires;  Cat 518 Log Skidder;  Cat 640E Log Skidder;  

Power Units & Compressors Sell Saturday, Feb. 17th

Saylor Beall Screw Air Compressor 480V – 3ph; Lima Mac 20kw Generator, Like New; Iveco 100 HP Diesel, w/clutch, low hrs;  27 HP Lister Diesel Engine;  Cummins 3.3 – 80 Hp Power Unit W/Clutch; John Deere 4039 Power Unit W/Clutch; Detroit 50 series 320 Hp Power Unit W/Clutch; John Deere 6059T Power Unit; John Deere 4045 Turbo Diesel, 300 hrs;  Portable 100kw Genset w/Cat D334 Engine;  Portable 200kw Genset w/Solar Turbine Engine;  Sullair Filter;  Hyd. Power Pack;  900 kw Genset Marathon w/V16 Detroit Diesel Engine;  Onan 45kw Genset, Engine Needs Rebuilt;  Onan 70kw Genset w/Ford Engine, Needs Rebuilt;  ATLAS-COPCO "GA-37" Rotary Screw Air Compressor, 50 HP - 216 ACFM at 125 PSI, single-stage rotary screw air-end & totally self-contained;  Detroit power unit w/clutch and hydraulic pump;  Atlas Copco GA-37 Screw Compressor, 30,000 hrs.; Ford 6 cylinder 82 HP Diesel w/clutch;  Lombardini 11 Hp Diesel, 1800 rpm;  Lombardini 9.5 Hp Diesel, 1800 rpm;  Isuzu 4BT rebuilt 130 HP Diesel w/clutch;  80 HP John Deere Diesel w/Clutch, 27,950 hrs

Pallet Shop, Sawmill Sells Friday & Saturday Feb. 16th & 17th 

Cleerman 36” Carriage and 50 HP Drive w/Pantograph, Track & all Controls; McDonough 62 M -167  62’ band head rig w/meadows #2, 3-head block hydraulic carriage w/computer set works on 48’ track, excellent condition;  Meadows 4X36 edger;  Mellot 10’ x 30’ live deck;  Reckart 26” blower;  32” x 29’ belt conveyor;    Hydraulic cooler with 70 gallon tank;  2016 Zimmerman Portable Bandmill W/31 Hp Vanguard Engine Mounted on Trailer;  2014 Norwood Lumber Pro HD36 Bandmill;  Like New Morgan Single Head Resaw;  1980 Frick Model 3 Edger; Shop Built Slab Cut Off Saw;  Brewco Up Cut, Cut Off Saw;  Rechart 42” Blower;  Reckart Log Turner, Good condition;  Cornell 6 x 42 Edger w/75 HP Motor;  New 2018 EZ Cut Model 2036 22 HP Portable Bandmill on trailer package, includes Debarker;  Albany 72” Band Head Rig;   Head Rig w/31” Wheel for 2” Band w/Frick Manual Feed Works;  New 2018 Model BMS500, CBN Sharpener, Belt Driven;   TimberKing Bandmill, Fully Hyd, 30 HP gas Kohler, 600 hrs;

 

Metalworking Equipment Sells Friday, Feb. 16th

 Delta 12” metal cutoff saw, air powered;  Warner Swasey Metal Lathe w/lots of Tooling, End Mills, Reamers, Bench Anvil;  Clausing 15” x 48” Engine Lathe;  Lodge & Shipley 14” x 36” Lathe;  Key Setter Holder;  5 Ton Bench Press;  Bridgeport Milling Machine;  Do All 36-R Bandsaw;  Tri-onics Hangman CNC Mill;  Tanniwitz Bandsaw;  Cincinnati Mill;  Norman Mill;  Metal End Mill;  Cyril Bath Mechanical press brake, 150 Ton X 10 ft, 8 Ft between housings, good working condition, 230v 3 ph;  Airco 150 Amp Tic Welder;  3 Head Floor Model Drill Press;  Air King Air Filter;  Ruger Hand Lift;  Presto M466 1000 lb. Lift;  2 Pallet Jacks;  Warner Swasey #5 Turret Lathe;  Potable Dollys;  Electric Jacks;  Kolee Horizontal Grinder;  Air Operated Press Brake;  Welding Table;  C Frame Press;  Gordon Grinder;  Buffalo Drill Press;  Gardner #1 Tool Grinder Large Cylinder;  Tip Hoppers; 

Woodworking Equipment Sells Friday & Saturday, Feb. 16th & 17th

Table Saws   New 2016 Felder K540 10” Table Saw W/10’ Sliding Table, 230v; New 2017 Oliver 4016 10” Table Saw, 230v;  Powermatic 66 10” Table Saw, 230v;  Delta 10” Unisaw w/50” Vega Fence, Hyd. Driven; Lobo 12” Table Saw w/50” Vega Fence 220V -3ph;  Delta Table Saw w/sliding table, belt driven;  Extrema XG-12A Gang Rip Saw, 480v;  Mereen Johnson 424 Gang Rip Saw,  24" dip chain fixed arbor gang rip saw;   Diehl SL55 Straight Line Rip Saw;   Robland 10ft sliding table saw #3200;  Dayton Table Saw;  Robland Sliding Table Saw w/Fence;  Griggio Model SC-3000 10ft sliding table saw 230v 3-ph;  Delta 10: Table Saw;  SCMI Z.32 CNC Panel Saw Good Condition;

Cutoff Saws   2014 Oliver 5025 18” Upcut Saw W/Slide Roller Table;  Delta 10” Miter Saw, air powered;  Omega MEC-300ST 12” Chop Saw, air powered;  Original Radial Arm Saw;   Dewalt Model GE67 Radial Arm Saw;  Delta/Rockwell 12” Radial Arm Saw, 2HP 230v 3ph;    Delta/Rockwell 14” Radial Arm Saw 3HP 220v 3ph;   Dewalt 10” Radial Arm Saw 1½ HP;   Craftsman 10” Radial Arm Saw 2.5HP 120v;  

Bandsaws   Mini Max SCM-6100 16” Bandsaw, 230v;  M2 Project Automatic Bandsaw, w/new hydraulic/air setup; 

Planers   Like New 2016 Stonewood ST20 20” Spiral Head Planer, 230v 3ph;  2010 Northtech 43” 3 Head Planer/Sander, 300 series hyd. driven;  Bridgewood BW-200P 20” Planer;  Powermatic 15’’ Planer;   (2)- Buss 44 Single Surface Planer 30"  20 HP 3,600 RPM;   Rockwell 22-503 Planer w/Helixhead;   Delta 18” Wedge Bed Planer, 3 Knives, 5HP 230/460v 3ph;   Powermatic 221 20” Planer 10HP 220v 3ph;   Powermatic Planer;  Buss 44 30” Planer;   Leadermac 2008 18” Planermac 445 Planes Top & Bottom;   Delta 22-503 24” Planer;

Jointers   Jet DB-8 8” Jointer W/Long Bed, 110v;  Grizzly A1018 Jointer;  Grizzly 8” Jointer W/Spiral Cutter Head;  Delta DJ20 8” Jointer, like new;  American  30" x 90" Jointer Belt Driven New Knives;  American 30” Jointer Belt Driven;  Famous 12” Jointer 4HP 220v;  

 Shapers   New 2017 Oliver 10047 1¼” Spindle Shaper, 230v;   Powermatic 27 1¼” Spindle Shaper, Hyd. Driven;  Robland T120 1¼” Spindle Shaper, hyd. Driven;  Lobo SP910 1¼” Spindle Shaper, hyd. Driven;  Grizzly ¾” Spindle Shaper;  Accura 1¼” Spindle Shaper W/Sliding Table, Line Shaft Driven;  Robland T-120, 1 ¼” Spindle Shaper;  

Moulders   Wadkin XE220-6 6 Head Molder, 460v; Brandt KDF780 Edge Bander, 230v; 2010 6000 cfm Dust Collector W/Indoor Bags;  Weinig 5 head molder w/cable clutch & flooring cutters;  Weinig 22N Molder, 480v; Anderson NC-1515PT CNC Router; Leadermac Model LMC 518S Smartmac 7" 5 Head Moulder 230 v  3-phase (1-owner/ Great Condition);   

Lathes   Powermatic V.S. Wood Lathe Model 90 230V three phase;  Haas VF4 with Rotary Table;   Broadhead Conover Wood Lathe w/Hydraulics;   Powermatic Model 90 VS Wood Lathe 230v 3ph;   Garret Lathe 1HP 220/440v 3ph, 8 Spindles; 

Sanders  New 2017 Oliver 6305 6” x 89” Edge Sander, 110v; New 2017 Oliver 5555 Double Head Drum Sander, 230v;  Grizzly Double Head 36” Drum Sander;  Stroke Sander;  Jet 22/44 Oscillating Drum Sander;  Bow Sander, New Condition;  MVM Spindle Sander, air powered;  Nash 85 Chairback Sander, w/new hydraulic setup;  Saddle Seat Sander;  Down Draft Table w/2 3M air sanders, vac ready;  Denray 28” x 60” Down Draft Table, 230v;  

Wide Belt Sanders   Timesaver Model 137-2, 37” double head wide belt sander w/air tracking;     AEM/SCM CL130 52” 2 Head Widebelt Sander;  1978 DMC 37” Double Head Wide Belt Sander, Hyd. Driven

Boring Machines   New 2017 Conquest CON-13 13 Spindle Manual Line Bore Machine, 110v;   MVM 13 Spindle Line Bore Machine, Air Powered;  Ritter R-46 Double Head Line Bore Machine’ 230v;  Newton BA-600 Boring Machine, hydraulic driven;  Holytek CDH6 Multihead Boring Machine;

Mortise & Tenoners    Northtech NT152 Single Head Tenoner, 230v;  Greenfield Mortise Machine; Hermance Tenon Machine;  Balestrini Tenoner; Balestrini Mortiser; D.A. Hochstetler & Sons Double End Tenoner W/Air Clutch; General International Mortiser;   2004 Dyna Tenon Machine, line shaft ready;  Gabbiani Double End Tenoner;  

Edge Banders   Edge Banding Tape Trimmer, top & bottom;  Holz-Her Sprint 1310-1 Single Sided Edgebander;     SCM Selecta 12F Edgebander 230v 3ph; 

Inverted Routers   Pin Router;  SCMI Pin Router;   CR Onsrud Model 3621 inverted Router, hydraulic driven;  Onsrud 3025 Inverted Pin Router; 

Dust Collectors   Jet Dust Collector, 2 HP 230v; 1999 Honeyville EFR-86-8 dust collection system, 480v 3ph;  (2) Bag house dust collector’s 64 bags per unit;  Delta Model 50-875  Highest airflow 3-speed air cleaner;    Torrit Dust Collector DMC-D2, 7½ Hp 230v 3ph;   2 = 64 Baghouse Air Filters;  Grizzly Portable Dust System w/Hydraulics;  JET JDP-1 Single Bag Dust Collector,110v;   2 Large Dust Collection Systems, 40 HP & 50 HP w/bag houses & duct work;

 

Drill Presses   2004 Dyna Drill Press, line shaft ready;  Delta Model 17-965 16 ½” Drill Press, air powered; ARO Auto Drill;   Cummins Mack CM0017 5 Speed Drill Press w/5/8” chuck; 

Dovetailers   2001 Omeg 750 Single Spindle Dovetailer W/Diamond Tooling, 230v;  Dodds 10 Spindle Dovetailer, mechanical clamps, line shaft driven;  Dodds Model SE25-CNC 25 spindle CNC dovetailer;  2013 Northtec Model DTM-16A-DS Dovetailer, 230v 3ph;  Powermatic DT-45 Dovetailer;  Wysong & Miles Model #601 15  Spindle Dove Tailer;  Wysong & Miles #600 15 Spindle Dovetailer;    

Door & Drawer Clamps   JLT 79K-6 Door Clamp, air powered; JLT 190B Drawer Clamp, air powered; JLT Door Clamp, 26” x 56” capacity;  JLT 190A Drawer Clamp; Taylor 48 x 84 Door Clamp;  Ritter Model R-450V Raise panel door assembly system;   Ritter Drawer Box Clamp; 

Clamp Carriers   Taylor 40 Section Clamp Carrier, 36” Clamps, Semi Automatic;  Taylor Clamp Wheel 10 section manual clamp wheel  8-1/2' wide, 32" clamps Manual rotation and tightening;   30 section Taylor Clamp Carrier;  Taylor Clamp Carrier, 10 Section, Manual;  Taylor Clamp Carrier, 20 section, Air operated;   

Misc. Woodworking    JDS Multi Router W/Sioux Air Motor; Delta Model 40-601 Scroll Saw, air powered ;  Hawg Air Shop Vac;  EZ Ball 260 Space Ball Inserter;   Norfield PRO Prehung Door Machine air/electric; New Jet 30” Micro Guide Fence & Rail;  Challenger 75 HP Horizontal Scrap Grinder,  Model CH300-4055-S, new in 2003, 39" wide opening, 73 HP, 3/4" baffled screen;  BIESSE ROVER 20 CNC MACHINING CENTER 37" X 113" Working Capacity;  Black Bros Pinch Roller 98" capacity pneumatic pressure;    Battery Lift Straddle Stacker;  Doucet Conveyor CMS-24-5-G 24” x 12’;  Stair Assembly Table/Press;  1997 Pneumatech AD400 Air Dryer, 400CFM, 2HP 440v 3ph;   Challenger 75HP Horizontal Scrap Grinder;    Retech RG32/20U Wood Grinder;  Delta 50-875 3 Speed Air Cleaner;  Biesse Rover 20 CNC Machining Center;  Gannomat 280 Type 281 Drilling & Dowel Machine;  Grizzly 3 Roll Power Feed;  Wesco Pallet Jack;  Kreg Foreman Pocket Hole Machine;  Mepla Hinge Boring/Press;  Superstop Rail & Stop System;  Tanniwitz U Variety Saw 5HP 3ph 220v;  Brainard Steel Banding Cart; 

Construction Tools & Equipment Sells Friday & Saturday, Feb. 16th & 17th

Klutch Portable Cement Mixer, electric powered;  1999 Somero S-100 Concrete Laser Sreed;  Dewalt Table Saw w/ox Air Motor;  Makita 36 volt Chain Saw;  Mason Tools Dispersal Mortar Mixers, Mason Saws, Scaffolding, Truck Tool Boxes w/lots of Hand Tools;

Building Materials & Sheds Sells Saturday, Feb. 17th 

We usually have several small storage buildings as well as lots of miscellaneous lots of lumber and building materials. 

Miscellaneous:  

200 sections 4’ x 5’ Lozier store shelving; Consew 205-RB2 Walking Foot; Juki LH-1152-4 Double Needle w/1” right angle binder; Juki DLN 415-5; Juki LK-1852 Bar Tacker; Eastman Cloth Drill; KM Cloth Cutting Machine; Magnum Energy RD2824 Inverter System, 4 batteries, 2 solar panels  (Hi-Lite Item); Sun Tracker 16’ Pontoon Boat w/35 hp motor; Complete Spray Foam Rig in a Trailer; Aluminum Truck Cap W/Tool Box 69¾” x 71¼”; Stihl Chain Saw; Husgvuarna Chain Saws, New & Used; 2015 29 hp Honda, Natural Gas Motor; 2010 Yamaha 6300 Watt Generator, 3315 Hrs. w/auto stop/start system;  New 5.5 Hp Honda Motor, SS Exhaust; 700 – 14” x 18” x 42” double wall cardboard boxes; 2000 Misc Cardboard Boxes; $15,000.00 of LED Corn Bulbs, Electric & 12 Volt, 4 different watts;  Landa Pressure Washer;  Honda Floor Buffer;  Commercial 2 door true freezer;  Groen Industrial Oven;  Clipper Masonry Saw;  Large Transformer;  Gear Boxes;  Air Dryer;  Blue M Industrial Oven;  Riveter;  Paper Shear;  Paint Shaker;  Industrial Blowers;  Lapping Machine;  Stainless Tanks;  Steel Boxes;  40’ Steel Trusses;  5’ x 16’ SS Evaporator Pan;  200 Gallon Air Tank; 6 - Honda EU2000 Generators, New Motors, Excellent Condition; 

Genaral Miscellaneous Consignments Sells Friday & Saturday, Feb. 16th & 17th

Most items valued over $500.00 will be listed separately, but again this year we’ve got 1000’s  of small items, too many to list, air compressors, generators, pressure washers, pallet jacks, electric motors, dust collecting systems, chop saws, electric & air tools, wrenches & socket sets, clamps, lights, chainsaws, ladders, carpenter, mason, and concrete tools, shelving, work benches, fasteners, extension cords, air hoses, wiring, duct work, wagons, wheelbarrows, garden carts, wheels, lineshafts, garden tools, plus much much more

Add On Consignments added on week of Jan. 15

Cat Grapple 525 Skidder w/Winch;  Ford 82 HP 6 Cylinder Diesel w/Clutch;  Lombardini 13 Hp Diesel, 1800 rpm;  Lombardini 9.5 Hp Diesel, 1800 rpm;  Powermatic Table saw w/hydraulic motor;  Delta Table Saw w/Powermatic Fence, hyd. Driven;  Delta 10” Table Saw W/Unifence;  Powermatic Table Saw w/52” Fence;  Diehl Inline Rip Saw, electric 3 ph, hyd. Feed;  Whirlwind Upcut Saw;  Dewalt 12” Chop Saw;   Dewalt 12” Compound Sliding Miter Saw;  Craftsman Radial Arm Saw/air motor;  Delta 10” Bandsaw;   Shopfox 2 HP Shaper w/outfence;  Shopfox 2 HP Shaper;  Shopfox 2 HP Shaper w/Power Feed;  Delta 5HP Dust Collector;  Shop Fox 2 Bag Dust Collector;  Nash 88 Spindle Turning Sander, 3 HP 3ph 220v;  Wysong/Miles 315 Edge Sander 2 HP 3ph 220/440;   Glue Spreader;  Spray Booth;  Devilbiss 3 Gallon Pot w/Gun;  Devilbiss 5 Gallon Pot w/Gun;  Devilbiss 10 Gallon Pot w/Gun;  Binks 10 Gallon Pot w/Gun;   Kauffman knife hinge slot cutter;  Misc. pulleys & lineshafts;  1999 Kobelco SK130LC Excavator w/Quick Coupler;  24” Bucket;  New 2018 EZ Cut Model 2036 22 HP Portable Bandmill on trailer package, includes Debarker;  1999 Kobelco SK130LC Excavator w/Quick Coupler;  

 Add On Consignments added on week of Jan. 22

1999 Dodge 1-ton Ram 3500 Diesel Truck, Spray Foam Trailer fully equipped w/Graco E30 spray foam reactor also 200’ of heated hose & tools;  Crown 5200 Series 5000 lb. stand on forklift w/charger;  2 – Crown 8000 lb. Battery Pallet Jack w/chargers;  Grizzly Wood Lathe w/Vega Copy Head;  Grizzly 2 Bag Dust Collector;   Lockformer Sheet Metal Roll former;  Vermeer RT100 Walk Behind Trencher;   Thermo King 35 HP Motor w/Stub Shaft;  Isuzu 35 HP Motor w/Clutch & Murphy Shutdown;  2009 Grizzly 15” Planer, Lineshaft Ready;  Craftsman 8” Planer Moulder, Lineshaft Ready;   2000 Vermeer V5800 Trencher w/60 HP Cummins, All Wheel Steer;   Lumber Tiger 10” Sawdust Blower;  Newer Shop Made Cutoff Saw w/Table;  24” x 24’ Conveyor Belt w/Gearbox;  2012 Cat 262C Skid Loader, Cab, w/Heat/Air, 2 Speed, Hi-Flow, 1500 hrs;  Butler 18’ Tilt Trailer, Tandem Axle, Electric Brakes;   Onsurd Pin Router;   2003 Yale Forklift, LP Gas, 3750 lb. 3 Stage;  2004 Amaze N Toe Single Axle Trailer;  Miller 5 axis Robot and Controller;  Betco Walk Behind Shop Sweeper;  Delta 16½” Drill Press, Air operated;  2017 Like New Sand Flee Portable Drum Sander;  Kubota Diesel/Winco Genset Model D905 8,000 watt Generator on Slide;  2017 Sand Flee Portable Drum Sander, 110v;  Delta 16½” Drill Press, Air Opereated;  Vintage McCormick Stationary Wire Baler;  Frick O Sawmill, 48’ All Steel Rail w/4 Head Manual Carriage;  Morgan 6 x 42 Edger;  Jacobson 2410-315 Hammer Mill;  Husky Pro Compressor on 80 Gallon Tank, 12.6 cfm, 2 Stage, 230v 1ph;  Lincoln 150amp Welder w/Leads;  Chicago 10’ Metal Brake & Stand;  Grizzly Metal Corner Notcher on Stand;   Clark CCX30E 5000 lb. Diesel Forklift w/48” Forks, 8472 hrs;  2017 FDU25 4800lb. Diesel Forklift w/42” Forks, 302 hrs;  Nissan 4200 lb. LP Forklift w/48” Forks & non-chalking tires;  TCM FGU25 5000 lb. Gas Forklift w/48” Forks, 9008 hrs;  40 KV TV Extension Swivels;  8000 Pairs KLN Full Extension Drawer Slides;  20,000 Twin Wheel Furniture Casters 1¾“, 2”, 2¼“ & 4”;   50 Gallon Drums w/Food Grade Lubricant Oil;  2003 Subaru Legacy Automobile, 187,506 miles;   Hyster 12,500 lb Forklift w/Perkins Diesel, Runs Good;  Toyota 7FGU32 Forklift, 12,700 hrs;   JCB 212 Loader, 70 HP Diesel, 4WD w/quick attach & 3 pt blade;  Weatherhead T420 Hyd. Hose Crimper & Dies;  Albany 72” Band Head Rig;  2 Large Dust Collection Systems, 40 HP & 50 HP w/bag houses & duct work;  Head Rig w/31” Wheel for 2” Band w/Frick Manual Feed Works;

 

 Add On Consignments added on week of Jan. 29

 John Deere 450C Dozer w/6 way blade, 200 hrs on engine rebuilt;  Tigercat 240B Knuckleboom Loader, 100 hrs on engine rebuilt;  Isuzu 4BT rebuilt 130 HP Diesel w/clutch;   Kobelco SK60 Excavator;  Genie GTH644 Telehandler, 6500lb;  International TD15C Dozer;   New 2018 Model BMS500, CBN Sharpener, Belt Driven;  12” Single Arbor Gang Rip;  2009 Accuform Sliter w/4 AM air motor;   Jeffrey 12” hammermill hog;  2013 Compost Tumbler;  2012, 2-27 HP Kawasaki twin cyl. natural gas motors w/hyd. Pump & tank;  8- 1½ HP hyd. Motors;   New Master Mill Up Cut Saw;  1” to 2” open end wrenches and large sockets;   80 HP John Deere Diesel w/Clutch, 27,950 hrs;  TimberKing Bandmill, Fully Hyd, 30 HP gas Kohler, 600 hrs;  ;  New Shed, Vinyl Deluze, 10’ x 16’;  12’ x 20’ Painted Office Shed w/Finished Interior & Electric;  Dog Kennel;  Bacci T4M Copy Shaping Lathe, 220v 3ph;  1978 DMC 37” Double Head Wide Belt Sander, Hyd. Driven;  Door Clamping Table w/ Air Clamps;  Timberjack 230A Log Loader w/Knuckleboom;  Case 850C Dozer w/Forestry Package, 80% UC Works Good;  Case 850K Dozer w/Forestry Package;  John Deere 444H Loader w/Rebuilt Engine;  1988 Case 580K 4 x 4 Backhoe, Works Good;  Bobcat 863 Skid Steer w/Duetz Diesel, 6207 hrs;  Mason Tools Dispersal Mortar Mixers, Mason Saws, Scaffolding, Truck Tool Boxes w/lots of Hand Tools;  Unused 340 Quincy Air Compressor;  Delta 10: Table Saw;  SCMI Z.32 CNC Panel Saw Good Condition;  2005 Sullivan/Paletek D185Q Compressor w/John Deere Diesel that does not run;  Kargo Master Ladder Racks;  600’ x ¾” & 300’ x 5/8” Cable, Very Good Condition;  Case 850K Dozer w/Forestry Package, W3 Allied Winch, 6415 hrs;  John Deere 444H Loader w/Rebuilt Engine, Foam Filled Tires;  Cat 518 Log Skidder;  Cat 640E Log Skidder;  

Add on Consignments added on week of Feb. 5th  Sells Friday & Saturday, Feb. 16th & 17th (Multiple Rings)

 

1995 Pendu Model 4400 Stacker;  Trim Saw, Able to cut 4 length simultaneously;  2003 Peterbuilt 1,130,000 miles, C15 Cat 6NZ 550 HP, Rebuilt Transmission, New Turbo, New Fuel Pump, New Head, New Jack Brake;  2002 Transcraft 53’ Stepdeck, New Tires & Brakes on Rear Axle;  1988 Ottawa Jockey Truck, Model 30, 7,400 hrs;  1999 International 26’ Bed Straight Truck;  Ingersoll Rand Rebuilt 2 Stage Compressor/on 210 Gallon Tank w/New 7 HP Subarau Engine;  Ingersoll Rand Rebuilt 1 Stage Compressor/on 150 Gallon Tank w/3phase Motor;  Dewalt Rebuilt Air Compressor;  2012 International 8600 Semi Tractor, Tandem Axle, 400,000 Miles;  2000 Ford F450 Diesel Service Truck, 170,000 Miles;  1998 Freightliner FL70 12’ Flatbed Truck, 3126 Cat, 6 Speed;  1995 International 9400 Semi Tractor, Tandem Axle, 10 Speed, Cat Engine;  2013 Loadmax Pintle Hitch Trailer w/Hyd. Dovetail;  2006 Trail King 20 Ton Pintle Hitch Trailer w/Air Brakes;  Case 1450 Dozer, Good UC;   Lots of Skid Steer Attachments;  Portable Buildings;  Welding Tables;  Komatsu Mini Wheel Excavator

 

 

  Unloading Schedule

Mon. February 12th from 8 A.M. to 8 P.M.,

Tue. & Wed. February 13th & 14th from 8 A.M. to 4 P.M.

Thursday 8:00 AM to 12:00 by Appointment Only.

 Air Works Consignment Auction Ltd.

P.O. Box 242 Kidron, OH. 44636

Office Phone # 330-749-4362

Office Fax # 330-816-0006

Email office@airworksauction.com

Website www.airworksauction.com

    
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
29th Annual Classic Air Works Auction
 Live Auction
 
Auction Date(s)
Thursday Feb 15, 2018 Completed
Friday Feb 16, 2018 Completed
Saturday Feb 17, 2018 Completed
Auction Location

Millersburg, OH 44654
Company
Air Works Auction

Contact: Air Works Auction Office
Phone: 3303179259
Website: www.airworksauction.com

Listing Terms and Conditions
Cash Day of Sale. Checks will be accepted with proper ID. All items are sold “As Is” unless guaranteed by the seller. Air Works Consignment Auction Ltd. acts only as an agent of the seller and assumes no responsibility for the seller statements. Buyers are encouraged to inspect items before bidding on them. All items are to be removed from premises by purchaser. In all disputed bids the decision of the auctioneer on stand is final. The sale price is the price recorded by the clerk on the clerking sheet at the time of the sale. If you question this price we will endeavor to check with the clerk and the auctioneer. However, if they don’t recall the item or a difference in the price, the price on the clerking sheet shall stand and you are expected to pay for the item. A Buyer’s Premium (see all rates) will be added: BUYER'S ADMINISTRATION FEES (AKA BUYER'S PREMIUMS) Standard Buyer's Administration Fee/Buyer's Premium - 5% CHECK BACK FOR ONLINE BIDDING BUYERS' PREMIUM If you purchase an unannounced damaged item, or the wrong item, call it to the attention of the auctioneer immediately. Purchaser assume responsibility for items at time of purchase (i.e., when the auctioneer declares the item sold.) Do not leave items unattended. When an item is sold the buyer is responsible for it, including damage and theft. ITEMS LEFT ON THE LOT 10 DAYS AFTER SALE WILL BE RESOLD OR DISPOSED OF. Be sure the clerk has your CORRECT BUYER NUMBER WHEN YOU MAKE A PURCHASE. Please only pay for your items. Pay Procedure: Pay in Auction office in Main Building. Remember, you are to pay for all purchased items before you leave the auction area. Check Out

29th Annual Air Works Consignment Auction

3 – Day Auction

GPS Location: 8076 SR 241 Millersburg OH 44654 From U.S. 30 take Kidron Rd. South for 9.2 Miles than turn right onto St. Rt. 241 for 3.8 Miles destination is on the left. From Interstate 77 take exit 83 onto 39 west toward Sugarcreek for 18 Miles turn right on County Rd. 77 North for 4.9 Miles destination will be on the right. Signs will be posted.

 Thursday Feb. 15th at 10:00 AM with 2 Auction Crews

Friday, Feb. 16th at 8:30 AM with 15 Auction Crews

Saturday, Feb. 17th at 8:30 AM with 12 Auction Crews

 Heavy Equipment * Rolling Stock * Sawmill & Pallet Equipment * Logging Equipment * Power Units * Woodworking * Metalworking * Antiques & Collectibles * Miscellaneous Industrial Tools & Equipment

Heavy Equipment Sells Saturday, Feb.17th 

Cat Grapple 525 Skidder w/Winch;  1999 Kobelco SK130LC Excavator w/Quick Coupler;  2009 JCB 520-50 Telehandler, 2250 Hrs. w/Perkins 4.4 Diesel;  Cat IT18F Wheel Loader W/Forks;   2012 Cat 262C Skid Loader, Cab, w/Heat/Air, 2 Speed, Hi-Flow, 1500 hrs;  Cat D3B Dozer w/6 way blade; 1986 Snorkel SLA35 Scissorlift, 1670 hrs. 35’ reach; PJ 30’ Gooseneck Trailer, Low Profile, Tandem Axle W/Electric Brake, Dual Tires; Cat D5 Dozer; Cat 950 Loader; 35 Ton King Low Boy Trailer; John Deere 770 Tractor W/Yanmar Diesel, 1100 hrs.;  2017 Stealth Gooseneck Trailer, 8.5’ x 32’, GVWR12000, New Condition;   Clark Battery Hand Forklift;  Wesco Barrel Lift;  Presto Hyd. Lift;  Semi Tractor Fuel Tanks;  Forklift Forks;  Allis Chambers 12,000 lbs. Lift;  Hyster 12,000 lb. Lift;  Clark 20,000 lb. Lift;  1994 Wabash Truss Truck;  2-Toyota 7FGU25 Forklifts w/Triple Mast, Side Shift, Hyd. Forks, L.P. Gas;  Toyota 8FGU30 Forklift w/Double Mast, Side Shift, L.P. Gas;  Toyota 8FGU30 Forklift w/Triple Mast, Side Shift, L.P. Gas;  2007 JLG 4394RT Scissor Lift, 1500 lb. Lift, Dual Fuel, 1325 Hrs;  Air Powered Forklift;   1999 Dodge 1-ton Ram 3500 Diesel Truck, Spray Foam Trailer fully equipped w/Graco E30 spray foam reactor also 200’ of heated hose & tools;  Like New 2014 Tandem Axle Cargo Trailer w/Complete Model REV5-14000 Spray Foam System w/Generator & Compressor;  2000 Vermeer V5800 Trencher w/60 HP Cummins, All Wheel Steer;  Clark CCX30E 5000 lb. Diesel Forklift w/48” Forks, 8472 hrs;  2017 FDU25 4800lb. Diesel Forklift w/42” Forks, 302 hrs;  Nissan 4200 lb. LP Forklift w/48” Forks & non-chalking tires;  TCM FGU25 5000 lb. Gas Forklift w/48” Forks, 9008 hrs;  2003 Subaru Legacy Automobile, 187,506 miles;   Hyster 12,500 lb Forklift w/Perkins Diesel, Runs Good;  Toyota 7FGU32 Forklift, 12,700 hrs;   JCB 212 Loader, 70 HP Diesel, 4WD w/quick attach & 3 pt blade;  John Deere 450C Dozer w/6 way blade, 200 hrs on engine rebuilt;  Tigercat 240B Knuckleboom Loader, 100 hrs on engine rebuilt;  Kobelco SK60 Excavator;  Genie GTH644 Telehandler, 6500lb;  International TD15C Dozer;  Timberjack 230A Log Loader w/Knuckleboom;   Case 850C Dozer w/Forestry Package, 80% UC Works Good;  Case 850K Dozer w/Forestry Package;  John Deere 444H Loader w/Rebuilt Engine;  1988 Case 580K 4 x 4 Backhoe, Works Good;  Bobcat 863 Skid Steer w/Duetz Diesel, 6207 hrs;  Case 850K Dozer w/Forestry Package, W3 Allied Winch, 6415 hrs;  John Deere 444H Loader w/Rebuilt Engine, Foam Filled Tires;  Cat 518 Log Skidder;  Cat 640E Log Skidder;  

Power Units & Compressors Sell Saturday, Feb. 17th

Saylor Beall Screw Air Compressor 480V – 3ph; Lima Mac 20kw Generator, Like New; Iveco 100 HP Diesel, w/clutch, low hrs;  27 HP Lister Diesel Engine;  Cummins 3.3 – 80 Hp Power Unit W/Clutch; John Deere 4039 Power Unit W/Clutch; Detroit 50 series 320 Hp Power Unit W/Clutch; John Deere 6059T Power Unit; John Deere 4045 Turbo Diesel, 300 hrs;  Portable 100kw Genset w/Cat D334 Engine;  Portable 200kw Genset w/Solar Turbine Engine;  Sullair Filter;  Hyd. Power Pack;  900 kw Genset Marathon w/V16 Detroit Diesel Engine;  Onan 45kw Genset, Engine Needs Rebuilt;  Onan 70kw Genset w/Ford Engine, Needs Rebuilt;  ATLAS-COPCO "GA-37" Rotary Screw Air Compressor, 50 HP - 216 ACFM at 125 PSI, single-stage rotary screw air-end & totally self-contained;  Detroit power unit w/clutch and hydraulic pump;  Atlas Copco GA-37 Screw Compressor, 30,000 hrs.; Ford 6 cylinder 82 HP Diesel w/clutch;  Lombardini 11 Hp Diesel, 1800 rpm;  Lombardini 9.5 Hp Diesel, 1800 rpm;  Isuzu 4BT rebuilt 130 HP Diesel w/clutch;  80 HP John Deere Diesel w/Clutch, 27,950 hrs

Pallet Shop, Sawmill Sells Friday & Saturday Feb. 16th & 17th 

Cleerman 36” Carriage and 50 HP Drive w/Pantograph, Track & all Controls; McDonough 62 M -167  62’ band head rig w/meadows #2, 3-head block hydraulic carriage w/computer set works on 48’ track, excellent condition;  Meadows 4X36 edger;  Mellot 10’ x 30’ live deck;  Reckart 26” blower;  32” x 29’ belt conveyor;    Hydraulic cooler with 70 gallon tank;  2016 Zimmerman Portable Bandmill W/31 Hp Vanguard Engine Mounted on Trailer;  2014 Norwood Lumber Pro HD36 Bandmill;  Like New Morgan Single Head Resaw;  1980 Frick Model 3 Edger; Shop Built Slab Cut Off Saw;  Brewco Up Cut, Cut Off Saw;  Rechart 42” Blower;  Reckart Log Turner, Good condition;  Cornell 6 x 42 Edger w/75 HP Motor;  New 2018 EZ Cut Model 2036 22 HP Portable Bandmill on trailer package, includes Debarker;  Albany 72” Band Head Rig;   Head Rig w/31” Wheel for 2” Band w/Frick Manual Feed Works;  New 2018 Model BMS500, CBN Sharpener, Belt Driven;   TimberKing Bandmill, Fully Hyd, 30 HP gas Kohler, 600 hrs;

 

Metalworking Equipment Sells Friday, Feb. 16th

 Delta 12” metal cutoff saw, air powered;  Warner Swasey Metal Lathe w/lots of Tooling, End Mills, Reamers, Bench Anvil;  Clausing 15” x 48” Engine Lathe;  Lodge & Shipley 14” x 36” Lathe;  Key Setter Holder;  5 Ton Bench Press;  Bridgeport Milling Machine;  Do All 36-R Bandsaw;  Tri-onics Hangman CNC Mill;  Tanniwitz Bandsaw;  Cincinnati Mill;  Norman Mill;  Metal End Mill;  Cyril Bath Mechanical press brake, 150 Ton X 10 ft, 8 Ft between housings, good working condition, 230v 3 ph;  Airco 150 Amp Tic Welder;  3 Head Floor Model Drill Press;  Air King Air Filter;  Ruger Hand Lift;  Presto M466 1000 lb. Lift;  2 Pallet Jacks;  Warner Swasey #5 Turret Lathe;  Potable Dollys;  Electric Jacks;  Kolee Horizontal Grinder;  Air Operated Press Brake;  Welding Table;  C Frame Press;  Gordon Grinder;  Buffalo Drill Press;  Gardner #1 Tool Grinder Large Cylinder;  Tip Hoppers; 

Woodworking Equipment Sells Friday & Saturday, Feb. 16th & 17th

Table Saws   New 2016 Felder K540 10” Table Saw W/10’ Sliding Table, 230v; New 2017 Oliver 4016 10” Table Saw, 230v;  Powermatic 66 10” Table Saw, 230v;  Delta 10” Unisaw w/50” Vega Fence, Hyd. Driven; Lobo 12” Table Saw w/50” Vega Fence 220V -3ph;  Delta Table Saw w/sliding table, belt driven;  Extrema XG-12A Gang Rip Saw, 480v;  Mereen Johnson 424 Gang Rip Saw,  24" dip chain fixed arbor gang rip saw;   Diehl SL55 Straight Line Rip Saw;   Robland 10ft sliding table saw #3200;  Dayton Table Saw;  Robland Sliding Table Saw w/Fence;  Griggio Model SC-3000 10ft sliding table saw 230v 3-ph;  Delta 10: Table Saw;  SCMI Z.32 CNC Panel Saw Good Condition;

Cutoff Saws   2014 Oliver 5025 18” Upcut Saw W/Slide Roller Table;  Delta 10” Miter Saw, air powered;  Omega MEC-300ST 12” Chop Saw, air powered;  Original Radial Arm Saw;   Dewalt Model GE67 Radial Arm Saw;  Delta/Rockwell 12” Radial Arm Saw, 2HP 230v 3ph;    Delta/Rockwell 14” Radial Arm Saw 3HP 220v 3ph;   Dewalt 10” Radial Arm Saw 1½ HP;   Craftsman 10” Radial Arm Saw 2.5HP 120v;  

Bandsaws   Mini Max SCM-6100 16” Bandsaw, 230v;  M2 Project Automatic Bandsaw, w/new hydraulic/air setup; 

Planers   Like New 2016 Stonewood ST20 20” Spiral Head Planer, 230v 3ph;  2010 Northtech 43” 3 Head Planer/Sander, 300 series hyd. driven;  Bridgewood BW-200P 20” Planer;  Powermatic 15’’ Planer;   (2)- Buss 44 Single Surface Planer 30"  20 HP 3,600 RPM;   Rockwell 22-503 Planer w/Helixhead;   Delta 18” Wedge Bed Planer, 3 Knives, 5HP 230/460v 3ph;   Powermatic 221 20” Planer 10HP 220v 3ph;   Powermatic Planer;  Buss 44 30” Planer;   Leadermac 2008 18” Planermac 445 Planes Top & Bottom;   Delta 22-503 24” Planer;

Jointers   Jet DB-8 8” Jointer W/Long Bed, 110v;  Grizzly A1018 Jointer;  Grizzly 8” Jointer W/Spiral Cutter Head;  Delta DJ20 8” Jointer, like new;  American  30" x 90" Jointer Belt Driven New Knives;  American 30” Jointer Belt Driven;  Famous 12” Jointer 4HP 220v;  

 Shapers   New 2017 Oliver 10047 1¼” Spindle Shaper, 230v;   Powermatic 27 1¼” Spindle Shaper, Hyd. Driven;  Robland T120 1¼” Spindle Shaper, hyd. Driven;  Lobo SP910 1¼” Spindle Shaper, hyd. Driven;  Grizzly ¾” Spindle Shaper;  Accura 1¼” Spindle Shaper W/Sliding Table, Line Shaft Driven;  Robland T-120, 1 ¼” Spindle Shaper;  

Moulders   Wadkin XE220-6 6 Head Molder, 460v; Brandt KDF780 Edge Bander, 230v; 2010 6000 cfm Dust Collector W/Indoor Bags;  Weinig 5 head molder w/cable clutch & flooring cutters;  Weinig 22N Molder, 480v; Anderson NC-1515PT CNC Router; Leadermac Model LMC 518S Smartmac 7" 5 Head Moulder 230 v  3-phase (1-owner/ Great Condition);   

Lathes   Powermatic V.S. Wood Lathe Model 90 230V three phase;  Haas VF4 with Rotary Table;   Broadhead Conover Wood Lathe w/Hydraulics;   Powermatic Model 90 VS Wood Lathe 230v 3ph;   Garret Lathe 1HP 220/440v 3ph, 8 Spindles; 

Sanders  New 2017 Oliver 6305 6” x 89” Edge Sander, 110v; New 2017 Oliver 5555 Double Head Drum Sander, 230v;  Grizzly Double Head 36” Drum Sander;  Stroke Sander;  Jet 22/44 Oscillating Drum Sander;  Bow Sander, New Condition;  MVM Spindle Sander, air powered;  Nash 85 Chairback Sander, w/new hydraulic setup;  Saddle Seat Sander;  Down Draft Table w/2 3M air sanders, vac ready;  Denray 28” x 60” Down Draft Table, 230v;  

Wide Belt Sanders   Timesaver Model 137-2, 37” double head wide belt sander w/air tracking;     AEM/SCM CL130 52” 2 Head Widebelt Sander;  1978 DMC 37” Double Head Wide Belt Sander, Hyd. Driven

Boring Machines   New 2017 Conquest CON-13 13 Spindle Manual Line Bore Machine, 110v;   MVM 13 Spindle Line Bore Machine, Air Powered;  Ritter R-46 Double Head Line Bore Machine’ 230v;  Newton BA-600 Boring Machine, hydraulic driven;  Holytek CDH6 Multihead Boring Machine;

Mortise & Tenoners    Northtech NT152 Single Head Tenoner, 230v;  Greenfield Mortise Machine; Hermance Tenon Machine;  Balestrini Tenoner; Balestrini Mortiser; D.A. Hochstetler & Sons Double End Tenoner W/Air Clutch; General International Mortiser;   2004 Dyna Tenon Machine, line shaft ready;  Gabbiani Double End Tenoner;  

Edge Banders   Edge Banding Tape Trimmer, top & bottom;  Holz-Her Sprint 1310-1 Single Sided Edgebander;     SCM Selecta 12F Edgebander 230v 3ph; 

Inverted Routers   Pin Router;  SCMI Pin Router;   CR Onsrud Model 3621 inverted Router, hydraulic driven;  Onsrud 3025 Inverted Pin Router; 

Dust Collectors   Jet Dust Collector, 2 HP 230v; 1999 Honeyville EFR-86-8 dust collection system, 480v 3ph;  (2) Bag house dust collector’s 64 bags per unit;  Delta Model 50-875  Highest airflow 3-speed air cleaner;    Torrit Dust Collector DMC-D2, 7½ Hp 230v 3ph;   2 = 64 Baghouse Air Filters;  Grizzly Portable Dust System w/Hydraulics;  JET JDP-1 Single Bag Dust Collector,110v;   2 Large Dust Collection Systems, 40 HP & 50 HP w/bag houses & duct work;

 

Drill Presses   2004 Dyna Drill Press, line shaft ready;  Delta Model 17-965 16 ½” Drill Press, air powered; ARO Auto Drill;   Cummins Mack CM0017 5 Speed Drill Press w/5/8” chuck; 

Dovetailers   2001 Omeg 750 Single Spindle Dovetailer W/Diamond Tooling, 230v;  Dodds 10 Spindle Dovetailer, mechanical clamps, line shaft driven;  Dodds Model SE25-CNC 25 spindle CNC dovetailer;  2013 Northtec Model DTM-16A-DS Dovetailer, 230v 3ph;  Powermatic DT-45 Dovetailer;  Wysong & Miles Model #601 15  Spindle Dove Tailer;  Wysong & Miles #600 15 Spindle Dovetailer;    

Door & Drawer Clamps   JLT 79K-6 Door Clamp, air powered; JLT 190B Drawer Clamp, air powered; JLT Door Clamp, 26” x 56” capacity;  JLT 190A Drawer Clamp; Taylor 48 x 84 Door Clamp;  Ritter Model R-450V Raise panel door assembly system;   Ritter Drawer Box Clamp; 

Clamp Carriers   Taylor 40 Section Clamp Carrier, 36” Clamps, Semi Automatic;  Taylor Clamp Wheel 10 section manual clamp wheel  8-1/2' wide, 32" clamps Manual rotation and tightening;   30 section Taylor Clamp Carrier;  Taylor Clamp Carrier, 10 Section, Manual;  Taylor Clamp Carrier, 20 section, Air operated;   

Misc. Woodworking    JDS Multi Router W/Sioux Air Motor; Delta Model 40-601 Scroll Saw, air powered ;  Hawg Air Shop Vac;  EZ Ball 260 Space Ball Inserter;   Norfield PRO Prehung Door Machine air/electric; New Jet 30” Micro Guide Fence & Rail;  Challenger 75 HP Horizontal Scrap Grinder,  Model CH300-4055-S, new in 2003, 39" wide opening, 73 HP, 3/4" baffled screen;  BIESSE ROVER 20 CNC MACHINING CENTER 37" X 113" Working Capacity;  Black Bros Pinch Roller 98" capacity pneumatic pressure;    Battery Lift Straddle Stacker;  Doucet Conveyor CMS-24-5-G 24” x 12’;  Stair Assembly Table/Press;  1997 Pneumatech AD400 Air Dryer, 400CFM, 2HP 440v 3ph;   Challenger 75HP Horizontal Scrap Grinder;    Retech RG32/20U Wood Grinder;  Delta 50-875 3 Speed Air Cleaner;  Biesse Rover 20 CNC Machining Center;  Gannomat 280 Type 281 Drilling & Dowel Machine;  Grizzly 3 Roll Power Feed;  Wesco Pallet Jack;  Kreg Foreman Pocket Hole Machine;  Mepla Hinge Boring/Press;  Superstop Rail & Stop System;  Tanniwitz U Variety Saw 5HP 3ph 220v;  Brainard Steel Banding Cart; 

Construction Tools & Equipment Sells Friday & Saturday, Feb. 16th & 17th

Klutch Portable Cement Mixer, electric powered;  1999 Somero S-100 Concrete Laser Sreed;  Dewalt Table Saw w/ox Air Motor;  Makita 36 volt Chain Saw;  Mason Tools Dispersal Mortar Mixers, Mason Saws, Scaffolding, Truck Tool Boxes w/lots of Hand Tools;

Building Materials & Sheds Sells Saturday, Feb. 17th 

We usually have several small storage buildings as well as lots of miscellaneous lots of lumber and building materials. 

Miscellaneous:  

200 sections 4’ x 5’ Lozier store shelving; Consew 205-RB2 Walking Foot; Juki LH-1152-4 Double Needle w/1” right angle binder; Juki DLN 415-5; Juki LK-1852 Bar Tacker; Eastman Cloth Drill; KM Cloth Cutting Machine; Magnum Energy RD2824 Inverter System, 4 batteries, 2 solar panels  (Hi-Lite Item); Sun Tracker 16’ Pontoon Boat w/35 hp motor; Complete Spray Foam Rig in a Trailer; Aluminum Truck Cap W/Tool Box 69¾” x 71¼”; Stihl Chain Saw; Husgvuarna Chain Saws, New & Used; 2015 29 hp Honda, Natural Gas Motor; 2010 Yamaha 6300 Watt Generator, 3315 Hrs. w/auto stop/start system;  New 5.5 Hp Honda Motor, SS Exhaust; 700 – 14” x 18” x 42” double wall cardboard boxes; 2000 Misc Cardboard Boxes; $15,000.00 of LED Corn Bulbs, Electric & 12 Volt, 4 different watts;  Landa Pressure Washer;  Honda Floor Buffer;  Commercial 2 door true freezer;  Groen Industrial Oven;  Clipper Masonry Saw;  Large Transformer;  Gear Boxes;  Air Dryer;  Blue M Industrial Oven;  Riveter;  Paper Shear;  Paint Shaker;  Industrial Blowers;  Lapping Machine;  Stainless Tanks;  Steel Boxes;  40’ Steel Trusses;  5’ x 16’ SS Evaporator Pan;  200 Gallon Air Tank; 6 - Honda EU2000 Generators, New Motors, Excellent Condition; 

Genaral Miscellaneous Consignments Sells Friday & Saturday, Feb. 16th & 17th

Most items valued over $500.00 will be listed separately, but again this year we’ve got 1000’s  of small items, too many to list, air compressors, generators, pressure washers, pallet jacks, electric motors, dust collecting systems, chop saws, electric & air tools, wrenches & socket sets, clamps, lights, chainsaws, ladders, carpenter, mason, and concrete tools, shelving, work benches, fasteners, extension cords, air hoses, wiring, duct work, wagons, wheelbarrows, garden carts, wheels, lineshafts, garden tools, plus much much more

Add On Consignments added on week of Jan. 15

Cat Grapple 525 Skidder w/Winch;  Ford 82 HP 6 Cylinder Diesel w/Clutch;  Lombardini 13 Hp Diesel, 1800 rpm;  Lombardini 9.5 Hp Diesel, 1800 rpm;  Powermatic Table saw w/hydraulic motor;  Delta Table Saw w/Powermatic Fence, hyd. Driven;  Delta 10” Table Saw W/Unifence;  Powermatic Table Saw w/52” Fence;  Diehl Inline Rip Saw, electric 3 ph, hyd. Feed;  Whirlwind Upcut Saw;  Dewalt 12” Chop Saw;   Dewalt 12” Compound Sliding Miter Saw;  Craftsman Radial Arm Saw/air motor;  Delta 10” Bandsaw;   Shopfox 2 HP Shaper w/outfence;  Shopfox 2 HP Shaper;  Shopfox 2 HP Shaper w/Power Feed;  Delta 5HP Dust Collector;  Shop Fox 2 Bag Dust Collector;  Nash 88 Spindle Turning Sander, 3 HP 3ph 220v;  Wysong/Miles 315 Edge Sander 2 HP 3ph 220/440;   Glue Spreader;  Spray Booth;  Devilbiss 3 Gallon Pot w/Gun;  Devilbiss 5 Gallon Pot w/Gun;  Devilbiss 10 Gallon Pot w/Gun;  Binks 10 Gallon Pot w/Gun;   Kauffman knife hinge slot cutter;  Misc. pulleys & lineshafts;  1999 Kobelco SK130LC Excavator w/Quick Coupler;  24” Bucket;  New 2018 EZ Cut Model 2036 22 HP Portable Bandmill on trailer package, includes Debarker;  1999 Kobelco SK130LC Excavator w/Quick Coupler;  

 Add On Consignments added on week of Jan. 22

1999 Dodge 1-ton Ram 3500 Diesel Truck, Spray Foam Trailer fully equipped w/Graco E30 spray foam reactor also 200’ of heated hose & tools;  Crown 5200 Series 5000 lb. stand on forklift w/charger;  2 – Crown 8000 lb. Battery Pallet Jack w/chargers;  Grizzly Wood Lathe w/Vega Copy Head;  Grizzly 2 Bag Dust Collector;   Lockformer Sheet Metal Roll former;  Vermeer RT100 Walk Behind Trencher;   Thermo King 35 HP Motor w/Stub Shaft;  Isuzu 35 HP Motor w/Clutch & Murphy Shutdown;  2009 Grizzly 15” Planer, Lineshaft Ready;  Craftsman 8” Planer Moulder, Lineshaft Ready;   2000 Vermeer V5800 Trencher w/60 HP Cummins, All Wheel Steer;   Lumber Tiger 10” Sawdust Blower;  Newer Shop Made Cutoff Saw w/Table;  24” x 24’ Conveyor Belt w/Gearbox;  2012 Cat 262C Skid Loader, Cab, w/Heat/Air, 2 Speed, Hi-Flow, 1500 hrs;  Butler 18’ Tilt Trailer, Tandem Axle, Electric Brakes;   Onsurd Pin Router;   2003 Yale Forklift, LP Gas, 3750 lb. 3 Stage;  2004 Amaze N Toe Single Axle Trailer;  Miller 5 axis Robot and Controller;  Betco Walk Behind Shop Sweeper;  Delta 16½” Drill Press, Air operated;  2017 Like New Sand Flee Portable Drum Sander;  Kubota Diesel/Winco Genset Model D905 8,000 watt Generator on Slide;  2017 Sand Flee Portable Drum Sander, 110v;  Delta 16½” Drill Press, Air Opereated;  Vintage McCormick Stationary Wire Baler;  Frick O Sawmill, 48’ All Steel Rail w/4 Head Manual Carriage;  Morgan 6 x 42 Edger;  Jacobson 2410-315 Hammer Mill;  Husky Pro Compressor on 80 Gallon Tank, 12.6 cfm, 2 Stage, 230v 1ph;  Lincoln 150amp Welder w/Leads;  Chicago 10’ Metal Brake & Stand;  Grizzly Metal Corner Notcher on Stand;   Clark CCX30E 5000 lb. Diesel Forklift w/48” Forks, 8472 hrs;  2017 FDU25 4800lb. Diesel Forklift w/42” Forks, 302 hrs;  Nissan 4200 lb. LP Forklift w/48” Forks & non-chalking tires;  TCM FGU25 5000 lb. Gas Forklift w/48” Forks, 9008 hrs;  40 KV TV Extension Swivels;  8000 Pairs KLN Full Extension Drawer Slides;  20,000 Twin Wheel Furniture Casters 1¾“, 2”, 2¼“ & 4”;   50 Gallon Drums w/Food Grade Lubricant Oil;  2003 Subaru Legacy Automobile, 187,506 miles;   Hyster 12,500 lb Forklift w/Perkins Diesel, Runs Good;  Toyota 7FGU32 Forklift, 12,700 hrs;   JCB 212 Loader, 70 HP Diesel, 4WD w/quick attach & 3 pt blade;  Weatherhead T420 Hyd. Hose Crimper & Dies;  Albany 72” Band Head Rig;  2 Large Dust Collection Systems, 40 HP & 50 HP w/bag houses & duct work;  Head Rig w/31” Wheel for 2” Band w/Frick Manual Feed Works;

 

 Add On Consignments added on week of Jan. 29

 John Deere 450C Dozer w/6 way blade, 200 hrs on engine rebuilt;  Tigercat 240B Knuckleboom Loader, 100 hrs on engine rebuilt;  Isuzu 4BT rebuilt 130 HP Diesel w/clutch;   Kobelco SK60 Excavator;  Genie GTH644 Telehandler, 6500lb;  International TD15C Dozer;   New 2018 Model BMS500, CBN Sharpener, Belt Driven;  12” Single Arbor Gang Rip;  2009 Accuform Sliter w/4 AM air motor;   Jeffrey 12” hammermill hog;  2013 Compost Tumbler;  2012, 2-27 HP Kawasaki twin cyl. natural gas motors w/hyd. Pump & tank;  8- 1½ HP hyd. Motors;   New Master Mill Up Cut Saw;  1” to 2” open end wrenches and large sockets;   80 HP John Deere Diesel w/Clutch, 27,950 hrs;  TimberKing Bandmill, Fully Hyd, 30 HP gas Kohler, 600 hrs;  ;  New Shed, Vinyl Deluze, 10’ x 16’;  12’ x 20’ Painted Office Shed w/Finished Interior & Electric;  Dog Kennel;  Bacci T4M Copy Shaping Lathe, 220v 3ph;  1978 DMC 37” Double Head Wide Belt Sander, Hyd. Driven;  Door Clamping Table w/ Air Clamps;  Timberjack 230A Log Loader w/Knuckleboom;  Case 850C Dozer w/Forestry Package, 80% UC Works Good;  Case 850K Dozer w/Forestry Package;  John Deere 444H Loader w/Rebuilt Engine;  1988 Case 580K 4 x 4 Backhoe, Works Good;  Bobcat 863 Skid Steer w/Duetz Diesel, 6207 hrs;  Mason Tools Dispersal Mortar Mixers, Mason Saws, Scaffolding, Truck Tool Boxes w/lots of Hand Tools;  Unused 340 Quincy Air Compressor;  Delta 10: Table Saw;  SCMI Z.32 CNC Panel Saw Good Condition;  2005 Sullivan/Paletek D185Q Compressor w/John Deere Diesel that does not run;  Kargo Master Ladder Racks;  600’ x ¾” & 300’ x 5/8” Cable, Very Good Condition;  Case 850K Dozer w/Forestry Package, W3 Allied Winch, 6415 hrs;  John Deere 444H Loader w/Rebuilt Engine, Foam Filled Tires;  Cat 518 Log Skidder;  Cat 640E Log Skidder;  

Add on Consignments added on week of Feb. 5th  Sells Friday & Saturday, Feb. 16th & 17th (Multiple Rings)

 

1995 Pendu Model 4400 Stacker;  Trim Saw, Able to cut 4 length simultaneously;  2003 Peterbuilt 1,130,000 miles, C15 Cat 6NZ 550 HP, Rebuilt Transmission, New Turbo, New Fuel Pump, New Head, New Jack Brake;  2002 Transcraft 53’ Stepdeck, New Tires & Brakes on Rear Axle;  1988 Ottawa Jockey Truck, Model 30, 7,400 hrs;  1999 International 26’ Bed Straight Truck;  Ingersoll Rand Rebuilt 2 Stage Compressor/on 210 Gallon Tank w/New 7 HP Subarau Engine;  Ingersoll Rand Rebuilt 1 Stage Compressor/on 150 Gallon Tank w/3phase Motor;  Dewalt Rebuilt Air Compressor;  2012 International 8600 Semi Tractor, Tandem Axle, 400,000 Miles;  2000 Ford F450 Diesel Service Truck, 170,000 Miles;  1998 Freightliner FL70 12’ Flatbed Truck, 3126 Cat, 6 Speed;  1995 International 9400 Semi Tractor, Tandem Axle, 10 Speed, Cat Engine;  2013 Loadmax Pintle Hitch Trailer w/Hyd. Dovetail;  2006 Trail King 20 Ton Pintle Hitch Trailer w/Air Brakes;  Case 1450 Dozer, Good UC;   Lots of Skid Steer Attachments;  Portable Buildings;  Welding Tables;  Komatsu Mini Wheel Excavator

 

 

  Unloading Schedule

Mon. February 12th from 8 A.M. to 8 P.M.,

Tue. & Wed. February 13th & 14th from 8 A.M. to 4 P.M.

Thursday 8:00 AM to 12:00 by Appointment Only.

 Air Works Consignment Auction Ltd.

P.O. Box 242 Kidron, OH. 44636

Office Phone # 330-749-4362

Office Fax # 330-816-0006

Email office@airworksauction.com

Website www.airworksauction.com