|
Air Works Fall Auction
2 – Day Auction
GPS Location: 8076 SR 241 Millersburg OH 44654 From U.S. 30 take Kidron Rd. South for 9.2 Miles than turn right onto St. Rt. 241 for 3.8 Miles destination is on the left. From Interstate 77 take exit 83 onto 39 west toward Sugarcreek for 18 Miles turn right on County Rd. 77 North for 4.9 Miles destination will be on the right. Signs will be posted.__________________________________________________________
Fall Auction Partners
Alex Lyon & Son Online and On-site Associated Auction Co. 315-633-2944 Heavy Equipment 800-598-3651
_____________________________________________________________
Thursday, November 16th 2017 at 9:00 AM
Friday, November 17th 2017 at 9:00 AM
Heavy Equipment * Rolling Stock * Sawmill & Pallet Equipment * Logging Equipment * Power Units * Woodworking * Metalworking * Miscellaneous Industrial Tools & Equipment
Heavy Equipment/Rolling Stock: (2007 John Deere 850J WLT dozer, wide tracks w/6 way blade) (Unused Volvo EC160 EL powered by Tier 4 diesel engine, equipped with Cab, air, heat, rearview and sideview camera, 10ft. stick, 24in. TBG pads, quick coupler, 30in. .65 yard digging bucket, long undercarriage.) (2010 Cat 314 DLCR powered by Cat C4.2 ACERT diesel engine, 97hp, equipped with Cab, air, heat, 15ft. 3in. boom, 8ft. 2in. stick, reduced tail swing, 19.7in. pads, digging bucket, long undercarriage.) (2015 Cat 308E2CR powered by Cat diesel engine, equipped with Cab, pattern changer, 91in. Front blade, auxiliary hydraulics, quick coupler, 36in. digging bucket with hydraulic thumb, 2,367 hours.) (2014 Cat 305ECR powered by Mitsubishi S4Q2-T diesel engine, 49hp, equipped with Cab, air, front blade, 15in. rubber tracks, reduced tail swing, digging bucket.) (Cat 304E AC/heat, aux hyd, quick coupler, hyd thumb, 3 buckets, 3623 hrs, regular serviced, 1 owner, works good) (2011 Cat 301.8C powered by Mitsubishi L3E diesel engine, 19hp, equipped with OROPS, front blade, 9in. rubber tracks, digging bucket, 889 hours) (2000 John Deere 160LC excavator w/thumb) (Unused JD 650KLGP powered by John Deere Power Tech 4.5L diesel engine, equipped with EROPS, air, heat, 115in. 6 way blade, 25in. pads, Max Life undercarriage, Topcon GPS ready.) (JD 850B powered by John Deere 6466A diesel engine, 175hp, equipped with OROPS, hydrostatic transmission, Semi-U blade, winch, 1,183 hours.) (Unused Cat D5K2XL powered by Cat C4.4 ACERT tier 4 diesel engine, 104hp, equipped with EROPS, air, heat, heated seat, rearview camera, 6 way blade, rear 3rd valve hydraulics, Accugrade, slope assist, GPS ready, long track frame.) (Cat D6E powered by Cat diesel engine, equipped with EROPS, heat, straight blade with tilt, rear Cat winch, very good condition.) (Cat D6D powered by Cat 3306 diesel engine, equipped with OROPS, sweeps, rear screen, Angle blade with hydraulic tilt, 22in. pads, winch.) (Cat D6D powered by Cat 3306 diesel engine, equipped with OROPS, rear screen, Angle blade with hydraulic tilt, 22in. pads, winch.) (1966 Cat D7E dozer w/4way blade) (Case 450B powered by Case diesel engine, equipped with OROPS, GP bucket. Log Forks Sell Separately.) (Drott/Case powered by LP engine, equipped with OROPS, 10,000lb lift capacity.) (2013 Cat 299D powered by Cat C3.8 DIT diesel engine, 98hp, equipped with rollcage, auxiliary hydraulics, mechanical quick coupler, rubber tracks, GP bucket, 2,339 hours.) (2012 Cat 299C powered by Cat C3.4 DIT diesel engine, 94hp, equipped with rollcage, auxiliary hydraulics, mechanical quick coupler, rubber tracks, GP bucket, 2,914 hours.) (Cat 259D 2speed, EROPS, ac/heat, aux hyd, quick coupler, bucket, 2257 hrs, regular serviced, 1 owner, works good) (2006 ASV RC50 powered by diesel engine, equipped with roll cage, auxiliary hydraulics, mechanical quick coupler, rubber tracks, 72in. GP bucket.) (1997 Case 1150G dozer, 6 way blade and new undercarriage) (Case 1150B dozer runs good, 80% UC) (850 B Case dozer) (Case 1150C dozer) (Case 850B crawler loader w/forks) (John Deere 455D crawler loader, 300hrs. on rebuilt motor, new UC, radiator, clutch, brakes, all in excellent condition) (Case 455C crawler loader) (450 John Deere crawler/loader w/backhoe rebuilt motor and starter, runs good) (Case 440CT skid steer, tracks, 2000 hrs, cab, very nice) (Cat 307 excavator, steel tracks, ling stick, cab) (Kubota KX41-2V mini exc, 2000 hrs, blade, aux hyd) (Case 1450 dozer, good UC) (2015 Kubota KX018-4 mini excavator, 303 hrs, 2 buckets, excellent condition)
Wheel Loaders: (2015 Cat 262D powered by Cat C3.3BDIT diesel engine, 74.3hp, equipped with EROPS, air, heat, air suspension seat, engine heater, 2-speed, auxiliary hydraulics, electronic quick coupler, Cat GP bucket, 12-16.5 rubber, 300 hours or less.) (2005 Cat 262B powered by Cat diesel engine, equipped with EROPS, heat, auxiliary hydraulics, mechanical quick coupler, 72in. GP bucket, 12-16.5 rubber.) (2005 Cat 248B powered by Cat diesel engine, equipped with EROPS, air, heat, high flow auxiliary hydraulics, hydraulic quick coupler, 72in. GP bucket, 12-16.5 rubber.) (2014 Cat 246D powered by Cat C3.3B Turbo diesel engine, 74hp, equipped with EROPS, air, heat, 2-speed, ride control, auxiliary hydraulics, electric quick coupler, 72in. GP bucket with BOCE, 12-16.5 rubber tires, 573 hours.) (4-2017 Case SV280 powered by Case diesel engine, 74hp, equipped with EROPS, air, radio, EH controls, 2-speed, ride control, auxiliary hydraulics, hydraulic quick coupler, 72in. HD Case bucket, 14 x 17.5 rubber, Low Hours. Sells with Warranty.) (3-2017 Kubota SSV75 powered by Kubota V3307-CR-TE4 diesel engine, 74hp, equipped with EROPS, air, heat, Kubota Shockless Ride, high flow auxiliary hydraulics, mechanical quick coupler, GP bucket, 12 x 16.5 rubber, 0 hours.) (2-2017 Kubota SSV65 powered by Kubota V2607-CR-TE4 diesel engine, 64hp, equipped with EROPS, air, heat, Kubota Shockless Ride, auxiliary hydraulics, mechanical quick coupler, GP bucket, 10 x 16.5 rubber, 0 hours.) (Gehl SL6635 powered by diesel engine, equipped with rollcage, auxiliasry hydraulics, mechanical quick coupler, 72in. GP bucket, 12-16.5 rubber.) (2014 JD 310 SUPERK 4x4, powered by John Deere diesel engine, equipped with EROPS, air, heat, extenda hoe, pilot controls, GP front bucket, rear digging bucket, 1,560 hours.) (2013 JD 310 SUPERK 4x4, powered by John Deere diesel engine, equipped with EROPS, air, heat, extendahoe, pilot controls, GP front bucket, rear digging bucket, 1,812 hours.) (JD 310D 4x4, powered by John Deere diesel engine, equipped with EROPS, GP front bucket, rear digging bucket.) (JD 410 powered by diesel engine, equipped with EROPS, GP front bucket, rear digging bucket.) (New Holland LB90 4x4, powered by diesel engine, equipped with EROPS, air, heat, front auxiliary hydraulics, extendahoe, GP front bucket, rear digging bucket.) (Case 580E extend-a-hoe)(2017 Case 621F powered by Case diesel engine, 162hp, equipped with EROPS, air, heat, radio, ride control, 3rd valve front hydraulics, hydraulic quick coupler, 3 yard GP bucket, 20.5 x 25 rubber, 45 hours. Protected by Case ProCare, remaining 3-year/3,000hr planned maintenance, 3-year Advanced Site Watch Subscription.) (2017 Case 621F powered by Case diesel engine, 162hp, equipped with EROPS, air, heat, radio, ride control, 3rd valve front hydraulics, hydraulic quick coupler, 3 yard GP bucket, 20.5 x 25 rubber, 45 hours. Protected by Case ProCare, remaining 3-year/3,000hr planned maint) (2017 Case 521F powered by Case diesel engine, 131hp, equipped with EROPS, air, heat, radio, ride control, 3rd valve front hydraulics, hydraulic quick coupler, 2.5 yard GP bucket, 20.5-25 rubber, 50 hours. Protected by Case ProCare, remaining 3-year/3,000hr planned maintenance, 3-year Advanced SiteWatch Subscription.) (2017 Case 521F powered by Case diesel engine, 131hp, equipped with EROPS, air, heat, radio, ride control, 3rd valve front hydraulics, hydraulic quick coupler, 2.5 yard GP bucket, 20.5-25 rubber, 50 hours. Protected by Case ProCare, remaining 3-year/3,000hr planned maint) (2016 JD 544K powered by John Deere diesel engine, 163hp, equipped with EROPS, air, ride control, block heater, hydraulic coupler, 3.0 yard GP bucket, 20.5R25 tires, 879 hours. Powertrain and Hydraulic Warranty till 9-26-19.) (2016 544K powered by John Deere diesel engine, 163hp, equipped with EROPS, air, ride control, block heater, hydraulic coupler, 3.0 yard GP bucket, 20.5R25 tires, 481 hours. Powertrain and Hydraulic Warranty till 2-23-18.) (2013 Cat 924K powered by Cat C6.6 ACERT diesel engine, 148hp, equipped with EROPS, air, heat, 3rd valve hydraulics, ride control, Fusion quick coupler, 3.2 yard GP bucket, 20.5R25 rubber, 3,397 hours.) (2011 John Deere JD624K, wheel loader, 2,700 hrs) (Case W24C loader w/forks & bucket 13,125 hrs.) (John Deere 344E loader w/forks & bucket) (John Deere 244H loader) (Case W11B wheel loader) (2000 Komatsu WB140-2 backhoe) (John Deere 482C 4 x 4, 6,000 lb. lift) (S185 Bobcat 61 HP w/turbo, 3500 hrs) (Volvo L70D wheel loader, 20,000 hrs, new front tires, runs good) (2012 Bobcat S-185 skid steer, 900 hrs, new tires) (New Holland LX665 skid steer, new tires) (Bobcat 743B, new Kubota engine) Kramer Allrad 620 wheel loader, cab, 4x4, nice shape) (Case W11 wheel loader, new diesel engine, rebuilt swivel, forks/bucket)
Attachments; (BTI BT1280 Hyd. Hammer fits 42-90,000lb machines, equipped with moil point.) (Unused Rock Hammer S2400 fits 42-77,000lb machines, equipped with chisel bit.) (Kent KHB400 Hyd. Hammer fits 14-20,000lb machines, equipped with chisel bit.) (Bobcat HB680 Hyd. Hammer equipped with chisel bit.) (Stanley MB350 Hyd. Hammer equipped with moil point.) (2-New Mid State tree shear) (4-New Wildkat Tiller) (4-New Midstate Stump grapple) (2-New Midstate stump bucket) (2-New Midstate reese hitch receiver) (11-New Midstate quick attach plate) (2-New Midstate Hyd. Adj. fork positioner) (5-New Midstate hay shear) (New Midstate dozer blade) (7-New Midstate brush hog w/72” push bar) (2-New Wildkat broom) (2-New Midstate backhoe) (2-New Midstate auger) (2-New Wildcat 96” snow plow) (New Midstate 84” snow and litter bucket w/bolt on edge) (2-New Midstate 84” root rake w/teeth) (New Midstate 72” E-series root grapple) (New Midstate 80” snow and litter bucket w/bolt on edge) (New Midstate 80” root grapple) (New Midstate 80” rock bucket grapple) (New Midstate 80” rock bucket) (New Midstate 80” LP bucket w/boce) (New Midstate 78” snow and litter bucket w/bolt on cutting edge) (3-New Midstate 78” Skeleton rock bucket) (New Midstate 78” LP bucket w/boce) (New Wildcat 78” E-series root rake) (New Midstate 78” E-series root grapple) (New Midstate 74” snow and litter bucket w/bolt on edge) (New Midstate 72” snow and litter bucket w/bolt on edge) (New Midstate 72” root grapple) (New Midstate 72” rock bucket grapple) (New Midstate 72” rock bucket) (New Midstate 72” LP bucket w/boce) (2-New Midstate 72” E-series skeleton bucket) (2-New Midstate 72” E-series root rake) (2-New Midstate 72” E-series root rake grapple) (2-New Midstate 72” E-series bucket grapple) (New Midstate 68” LP bucket w/boce) (New Midstate 66” e-series root grapple) (New Midstate 66” rock bucket grapple) (New Midstate 66” rock bucket) (3-New Midstate 66” E-series skeleton bucket) (New Midstate 66” E-series root rake) (2-New Midstate 66” E-series root grapple) (New Midstate 63” LP bucket w/boce) (9-New Midstate 48” fork set) (2-New Wildcat 3 point hitch) (2-New 2 cu. yd trash hopper)( 3-New 84” fork extentions) (4-New attach frame) (2-New JBX 4000 48” pallet forks)
Forklifts: (Mustang 1155 4x4, powered by John Deere diesel engine, equipped with EROPS, air, heat, 4 speed forward/ reverse, 11,000lb lift capacity, 55ft. reach height, front stabilizers, 4ft. forks.) (JD 3800 4x4, powered by diesel engine, equipped with EROPS, 5,500lb lift capacity, 18.5ft. Reach height, 19.5-24 tires.) (2012 JCB 541-70 4x4, powered by JCB 444 diesel engine, 125hp, equipped with EROPS, air, heat, 9,000lb lift capacity, 23ft. reach height, Michelin 500/70R24 rubber.) (Cat V80D 8000 lb forklift) (Cat V80C 8000 lb forklift w/4 cyl. Perkins, 8 hrs. on engine after overhaul) (Toyota 75DU32 forklift) (7FGU25 Toyota 3 stage forklift, 18K hrs, new tires) (Toyota 7FGU35, 7000lb forklift) (1982 Manitou 6,000 lb forklift MDL 680, 4,136 hrs) (Manitou 6,000 lb forklift MDL 680, unknown hrs) (Cat 50 5,000 lb. forklift) (Skyjack SJ7027 all terrain scissor lift, 27’ reach)
Tractor’s & Trenchers; (John Deere JD6420, 4 x 4 tractor, cab, heat/air) (John Deere JD6415 4 x 4 tractor, cab, heat/air) (Case 460 4x4, powered by Case diesel engine, equipped with ROPS, push blade, trencher, 1,400 hours.) (New Holland TC33DA-HST 4x4 tractor, 800 hrs, w/72” 914A deck) (Massey Ferguson 65, 50 HP Perkins diesel, live PTO, single wire alternator)
Forestry Machines: (2012 Vermeer WC2300 w/Cat C13, 440 hp whole tree chipper w/feed belt, 1340 hrs.) (Prentice 325 log loader) (Rayco RG85 180 HP Cummins, stump grinder) (1977 John Deere 540B skidder) (FMC 210 log skidder w/winch, good condition) (1987 John Deere 648D log skidder) (Timberjack 230A forwarder log prehauler) (Butt style grapple w/190 0 rotation)
Vehicles: (2010 Mack CXU612 powered by Mack MP7 diesel engine, equipped with Eaton Fuller transmission, power steering, single axle.) (4-2009 Mack CXU612 powered by Mack MP7 diesel engine, equipped with Eaton Fuller transmission, power steering, single axle.) (2010 Sterling powered by Mercedes OM460 diesel engine, equipped with Eaton Fuller 10 speed transmission, power steering, air ride suspension, single axle, Fleet maintained.) (4-2007 Sterling powered by Mercedes OM460 diesel engine, equipped with Eaton Fuller 10 speed transmission, power steering, air ride suspension, single axle, Fleet maintained.) (2004 Ford diesel F550, 6.0 liters, 281K miles) (12 semi van/chip trailers 40’ and 45’ Trail Mobile, Great Dane, Frue Hauf, and Brea) (1-1988 & 1-1986 53’ Trailmobile chip trailer) (Phelps E-36H 36” chip van loading system) (8-1/2’ x 18’ United enclosed trailer w/rear ramp & side door) (1990 Morooka MST1100 track dump truck, new rubber tracks, runs great) (1988 Chevy 1 ton dump truck, 60K miles, good shape) (1990 Ford E350XL 1 ton ambulance 58K miles, like new shape) (2014 John deere Gator UTV 825.1, 800 hrs, 4 seater, Pwr steering) (1981 Dors 38’ log trailer, 4 bunks) (1994 GMC diesel, 4 door pickup truck, runs great) (International dump truck, 335,639 miles)
Sawmill Equipment: (2017 NEW Lumber Master 35HP Kabota diesel band mill 36” x 20’ log cap., w/power feed debarker, log taper w/rollers, on trailer package, will be on display at the expo, sells on Thurs. Nov. 16 at 4:00 P.M., will be available after the expo on Fri. Nov. 17) (Frick 56” sawmill, 175 HP International diesel w/hydraulics, log turner, cab. w/controls, sells as one unit) (Frick 3 hd block carriage, 3’ x 48’ track, air operated tong dog carriage w/electric setworks, hyd cant kickers/log turners, controls, lattice, steps, 20’ 4 strand log deck w/forward & reverse, Mellott 120 hp hyd log turner, 56” circular head saw w/10 hp electric motor, 5’ off bearer belt & air conditioned cab, 30” top saw w/30 hp electric motor, 24” x 29’ wide live rollers, 6’ 4 strand transfer deck w/electric motor, gear box, foot controller & Frick 27” edger w/2 saws, a third can be added w/25 hp electric motor) (Lane 52” automatic circular sawmill w/carriage & drive) (Lane #1 handset 52” circular sawmill) (Cleerman 4 hd block modular mill) (2002 LT300 Woodmizer 30 hp electric, lots of new parts or rebuilt, 30” x 20’ log capacity, complete and ready to go) (McDonna headrig saw w/54” wheel, w/10” wide band, good condition) (Lumber Tiger band mill w/24’ carriage, cuts up to 28” logs, portable, includes Kawasaki engine) (Frick sawmill, 2 head lock, 56” blade) (Morgan 36” scraggmill, belt driven) (Portable Morgan mini scragg mill ) (2008 30” wheel vertical band mill) (Heartwood DBL cut band sawmill) Resaw (Brewco BSBH12 grade resaw bandsaw w/run around) (SF-800 20” resaw w/Stutzman built turn table) (Baker BBR-O band resaw) Carriage (Cleerman 36 sawmill carriage) (Cleerman 40 carriage w/3 head block & air/hyd. Powered dogs, includes Tyrone hyd. Carriage drive) (Frick 3 head, 16’ carriage w/48’ track and 12 volt dogs) (2008 Frick OIC carriage & track w/model B set works) (Tyrone Berry 213 carriage drive) (Tyrone Berry MDL 240 carriage drive w/100 hp hyd drive) (Tyrone Berry feedworks SMA213) (Corinth 36” 3 hd block carriage w/4 x 5 saw cab, new tracks & wheels) Debarker (HMC slant track V-206 HST debarker) (Mobark EM16 20’ infeed w/debarker head and 18” outfeed, will kick left & right-spare debarker head) Log Turner (Mellott log turner) (Reckart 969 log turner) (hyd. Powered log turner) ( like new log turner) (log turner chain style w/hyd motor) (18” x 26” Hog) (2 chain 20’ log deck w/stop-n-load) (10’ x 20’ 3 strand log deck, hyd. Driven) (8’ x 16’ hyd. Log deck) (10 hp electric log deck) Decks (39’ 5 strand grade chain w/7 pop up rolls, 7’ rolls, control, motor & drive) (17.5’ 4 strand deck 12’ wide w/motor & drive) (53’ 8 strand rooftop chain deck 12’ wide w/catwalk, motor & drive) (48’ 5 strand deck w/4 rooftop chains 15.5’ wide, motor & drive) (16’ live roll case w/30” spiral rolls, motor & drive) (9.5’ 6 strand rooftop deck 12.5’ wide w/motor & drive) (live roll case w/32” rolls, motor & drive) (12’ live roll case w/30” spiral rolls, motor & drive) (17’ live roll case w/32” rolls, pop up chain transfer, motor & drive) (18’ live roll case w/20” roll, motor & drive) (22’ 4 strand log deck 11’ wide w/stop & load, motor & drive) (8’ 7 strand deck 12.5’ wide w/motor & drive) (8’ 7 strand deck 12.5’ wide, 3 slides & stop pins, no motor or drive) (20’ 4 strand lumber transfer deck w/drive) (20’ 3 strand infeed log deck w/stop & load) (33’ 5 strand transfer deck 10’ wide w/motor & drive) (20’ 4 strand discharge log deck) (5’ 5 strand transfer 12’ wide w/motor & drive) (Homemade 10’ x 20’ hyd. log deck) (30” x 15’ 2-strand transfer deck) (3 strand live deck w/stop & load) (6 strand skate pop up) (38’ live roll case w/30’ rolls, flip gate, slide gate, motor & drive) (18’ live rollcase w/30” rolls w/motor & drive) (5 strand rooftop deck 11.5’ wide w/pop up transfer, motor & drive) (26’ 5 strand rooftop deck 11.5’ wide w/motor & drive) (18’ live roll case w/27” spiral rolls w/slide stop gate, motor & drive) (29’ 4 strand rooftop deck 12.5” wide w/stops, skate roll slides, motor & drive) (16’ live roll case w/30” rolls 2, dead rolls, 3 spiral live rolls, motor & drive) (11’ 5 strand rooftop deck 10.5’ wide w/lift bars, motor & drive) (10’ 5 strand deck 10.5’ wide w/4strand pop up transfer, motor & drive) (4’ 5strand pop up transfer) (14’ 8 strand infeed 15’ wide) (6 strand 90 degree right turn green chain w/motor & drive) (163’ 6 strand green chain 12’ wide w/motor & drive) (11’ live roll case w/22” rolls, triple chain cradle rotators & hyd motors) (4’ x 15’ live roll case) (36’ roll case) (14’ roll case) (7’ dead rolls w/18” rolls) (5.5’ x 12’ unscrambler w/motor & drive) (9’ x 16’ unscrambler w/motor & drive) (4.5’ x 17’ wide unscrambler 6 strand, w/motor & drive) Edgers (Meadows 971X-69 portable edger) (Chase 2 saw 32” edger) (Fastline slab recovery edger, excellent condition, w/30 hp electric motor & hyd. Feed) (Cornell 1100 75hp electric motor, 6” x 42”, 4 blade edger/gang combo w/1 movable blade) (Edminton 25 hp electric motor, 4” x 36” edger, 3 blades w/1 movable blade) (Frick 662 2 blade edger) (Miner edge works 3 saw stationary edger, belt driven) (Miner edge works 3 saw stationary edger w/25 hp Allis Chalmers induction motor) (Irvington double end notcher) (15 hp electric motor chop saw w/11’ live rolls) (Crosby XT100 double end trimmer) (Morgan double end trim saw, belt drive w/20 hp Honda model GX620) Conveyors (40’ conveyor w/15” belt, motor & drive)(21’ conveyor belt pan, no belt, w/motor & drive) (17’ conveyor w/17” belt, no motor or drive) (44’ conveyor w/18” belt, motor & drive) (2-22’ conveyor w/30” belt, motor & drive) (22’ conveyor w/36” belt, motor & drive) (49’ conveyor w/23” belt, motor & drive) (13’ conveyor w/10” belt, motor & drive) (8” x 29’ saw dust conveyor w/motor and gearbox) (Patz 30’ bark conveyor) (New 24” x 13’ flat belt electric conveyor) (20’ conveyor w/19” belt, motor & drive) (Precision 18’ vibrating conveyor) (24” x 20’ flat belt conveyor) (Fulghum 25’ vibrating conveyor) (67’ conveyor w/16” belt, motor & drive) (Mellott 94’ vibrating conveyors w/2 drives) (5’ x 12’ rooftop multi directional conveyor) (24” x 13’ adjustable conveyor) (22’ 9” x 16” belt conveyor w/electric drive) (Klamath 72” LH #56 w/off bearer belt) (78” conveyor w/22” belt, motor & drive) (approx. 56” bark drag chain) (34’ Berg MDL 400 Choremaster sawdust chain drag , electric gear driven) Dedusters (Golden Eagle deduster) (Baker deduster) (Baker BDD-O deduster, set up for lineshaft) (sawdust barn cleaner) (Morbark 868 chip pack 58”) (Morbark 48” knife chip pac) (Brewer Golden Eagle N-series 10’ x 14’ board stacker) (30D10 Jackson Lumber Harvester shaving mill, no power, 2 = 6” knife heads, good condition) (60” circular saw blades) (husk w/overhead saw combination) (tow behind log arch) (Heavy steel frame husk w/52” saw head, inserted teeth) (Cornell 28” blower) (30 hp blower) (28” x 6’ cyclone w/mounting frame) (Hanchett size 220 RH band saw sharpener w/stands) (#4 Armstrong LH bandsaw sharpener w/clamp & stand) (#4 Armstrong stretcher roll w/bench & anvil) (#4 Armstrong band stretcher roll w/anvil) (#2 Armstrong LH band saw sharpener w/stands) (#4 Armstrong bandsaw sharpener w/Armstrong filing clamp, stands, not assembled) (Armstrong band saw swedge bench) (Armstrong air swedge) (Vecoplan 11981-90 midwest grinder, type VAZ190) (Hanchett tensioner w/stands) (12-band saw blades for 6’ Mcdonough saw) (air filter unit) ( 3-hand swedges, swedge parts & banding tool) (Armstrong air swedge) (Armstrong type B shapers) (SCM shaper MDL T100) (2000 IPM series 10/10 wrapper MDL P, 115 volt, 10/10PPS) (circle blade bit setter and circle saw stand) (5 back gauges) (3-straight edges) (laser lite and assorted lasers condition unknown) (2-dial indicators) (4-6’ & 4-10’ aluminum lumber carts w/100’ of track)
Pallet Shop Equipment: (New, Stutzman Mfg. Woodpecker Jr pallet nailer w/4 nailers & pallet stacker, 3ph. 480 volts, sells Thurs. Nov. 16, at 3:00 P.M.) (BR1695T Brewer electric twin select cutoff saw, rebuilt) (heavy duty 26” swing cut off saw w/1 extra blade) (4400 Pendu electric automatic stacker) (8124 Brewer dbl arbor, dbl bay, electric powered gangsaw)
Power Units & Compressors: (Unused, John Deere diesel w/clutch, 200 HP, 6068HF285) (Unused, John Deere diesel w/clutch, 100 HP, 4045TF290) (2005 Iveco 280 HP diesel engine) (3208 Cat 250 HP hydraulic power unit) (Cat 3406B diesel genset, 350kw) (Detroit 6 cyl 71 series diesel genset, GM power take-off & exhaust) (5.9 Cummins 190 HP diesel) (Hercules 180 hp, 6 cyl. Turbo diesel, runs good) (Duetz 175 HP, 6 cyl. Diesel w/murphy shutdown, 174 hrs after rebuilt) (471 Detroit 150 HP w/clutch) (471 Detroit 86 HP diesel) (Cummins 4 cyl. Diesel w/Rockford clutch, 649 hrs) (354 Perkins 120 HP diesel w/stub shaft) (Detroit 671 power unit w/clutch) (Volvo 6 cyl. Diesel w/Rockford clutch) (F6L912 Duetz 94 HP diesel engine) (Detroit 671 power unit w/Rockford clutch, 3300 hrs. since rebuilt) (Detroit 471 W/AP clutch, completely rebuilt) (John Deere 100 Hp 6 cyl. Diesel w/clutch and new injectors) (Cummins NTC290 diesel) (Duetz BF6L914C 177 hp diesel, pulled scraggmill) (Cummins B3.9C 75 hp diesel, pulled merchandiser & hyd. For scraggmill) (John Deere 301FDF001, 3 cyl. 220 series diesel) (Isuzu 35 HP diesel, runs good) (International 6 cyl. Diesel, needs work) (John Deere 6-329DH skid mounted diesel, w/radiator & clutch) (Cummins M11 350 HP diesel, needs rebuilt) (2002 Cat SR4B 275kw generator, 3 phase, 480v.) (GM 50kw genset w/371 Detroit engine) (Cat 4 cyl, 85 hp, turbo w/Rockford clutch) (Duetz BF4L2011 diesel w/hyd. Pump, on skid) (2006 Generac diesel genset, used very little) (Reddy Power R450A18CE, natural gas generator) (3 cyl. Duetz F3L912 diesel on skid w/13 cfm compressor and 15 GPM hyd. Pump w/reservoir and 15 KW generator) (New 9000TB 420cc portable, industrial, gas generator) (New 9000MTB portable, industrial, gas generator) (John Deere diesel mounted on frame w/lineshaft hyd. Unit & blower set up to pull Vecoplan grinder) (Sullair 185 tow behind air compressor) (Sullivan/Palatek 4050LSCB air compressor) (Bauer 30 HP screw air compressor) (ULPL9000 Saylor Beal 25 hp air compressor) (Quincy 390, 15 hp air compressor) (Meccaltespa 24kw, 3 phase, 220 volt generator) (10hp electric and air compressor mounted on 80 gallon tank) (Ingersol Rand, 71T2D, air compressor w/electric motor mounted on 80 gallon tank)
Light Towers; (2-Unused Genie RL4 powered by Kubota diesel engine, 13.6hp, equipped with 4-1,000 watt lighbulbs, 7KW, 50Hz generator, trailer mounted.) (2-2012 Magnum Pro MLT3060 powered by diesel engine, equipped with 4-1,000 watt lighbulbs, 6KW generator, trailer mounted.) (11-2011 Magnum Pro MLT3060 powered by diesel engine, equipped with 4-1,000 watt lighbulbs, 6KW generator, trailer mounted.)
Metal Working Equipment: (Standing seam roll former on wheels) (Cincinnati 21 x 72 metal lathe) (Miller excellerator welder) ( Wheeling turning lathe w/12’ long bed) (Bridgeport model 6 milling machine) (Jet JWP-110 horizontal metal bandsaw) (Oster portable air powered pipe & bolt threader) (2 welding clamps w/stand) (4-New 30” x 57” welding tables) (3-New auto darkening welding helmets)
Woodworking Equipment: We have some very nice woodworking equipment consignments here (2002 Northtec SRS-14, straight line rip saw, line shaft ready) (Orton 30” gang resaw, 12 blades, w/walking bed feed) (Mattison 202 straight line rip saw 14” blade, 1-1/2” arbor, 4” max cut powered by hyd. & line shaft) (Extrema ES137, 37” wide belt sander, lineshaft ready) (Powermatic 37” x 60” wide belt sander, 230 volt) (Robland 2320, 10’ sliding table saw) (Dodds SE20R, 20 spindle dovetailer) (Stone ST-24, 24” spiral head planer) (Rockwell 24” straight knife planer, 230 volt) (IMW babbit planer MDL 240SS) (Weaver 3 shaper set up, hydraulic) (Powermatic #66 table saw, hydraulic) (10” Delta/Rockwell table saw 2 HP 230 volt, 3 phase) (Northtec NT-452D tenoner) (Jet JWP-15H 15” planer, 220 volt) (Jet 25” wide belt sander) (JLT 79K-6-DC door clamp) (Newton 2 spindle dowel machine) (Jet JBS 14” bandsaw) (Kreg DK 1100 pocket hole machine) (Grizzly 8” spiral head jointer) (American 16” jointer) (Millbury air tenenor) (Delta ¾” spindle shaper) (Powercraft ¾” spindle shaper) (Dewalt 3 phase radial arm saw) (Powermatic hyd. 6” x 89” edge sander) (Delta hyd. 16½” drill press) (Delta hyd. 14” band saw) (Boss electric spindle sander) (Oliver 361-AD 30” planer, 4 knives w/sharpener, sealed bearings) (Rydell 691 automatic tailboy resaw power feed return, hydraulic) (Stutzman 480 volt drilling machine) (480 volt trim saw w/power feed) (9” sawdust blower) (Aget model 807S-PL, 5500 CFM pull through cyclone) (Aget 80E70-SP w/special DH wheel for quiet and efficient operation) (Fulghum 8’ cyclone)
Ladders, Lumber & Storage Sheds: (New 8’ x 12’ storage shed, shingles, 2 doors, 2 windows)
Complete Hardware Dispersal; (stocked bolt bin) (wall of new Stanley tools and other brand names) (brooms, shovels, rakes, etc. etc.) (paint and cleaning products) Plus much more
Miscellaneous: (Creekside Welding, New self dumping hoppers 1 yd, 1½ yd, 2 yd, 3 yd, 6’ wide opening, and a 2½ yd quick attach dumpster) (2 = 2 yd Apex, 1-1/2 yd , and 1/2 yd Apex dumpsters) (2-New 2 yd stackable self dumping, 4,000 lb. hopper,.) (2-New 1.5 yd Stackable self dumping, 4,000 lb. hopper,) (2-New 1 yd stackable self dumping, 4,000 lb. hopper) (New 8’x 10’ twin wall greenhouse) (20-Pallets New assorted stone) (2-New Mustang LF88 plate compactor) (2-New Mustang CV3500 concrete vibrator) (4-New Mustang MP4800 2” submersible pump) (New Huskie B65 elec. Demolition hammer) (4-New 3 pc. 14” premium diamond blades) (4-New ½” drive air impact wrench kit) (2-New 2” x 50’ discharge water hoses) (6-New 25’ 800 amp extra hd booster cables) (New 3 pc. Air spray gun kit) (4-New 29.5” x 90” heavy duty work bench)) (2-New 3/8” AR500 dueling tree shooting target) (2-New 3/8” AR500 gong target) (2-New AR500 dueling tree shooting target) (2-New AR500 3/8” spinner target) (chamfer machine) (Allied W5C winch) (electric Porta Dust Hog shop vac model 01-2704-02 FPH 2-2) (150 HP Baldor 3 ph. Electric motor) (60 HP Lincoln 3 ph. Electric motor) (various other electric motors) (2010 BR42 wood boiler, heats up to 2500 sq ft) (Misc. shelving and plastic bins) (Semi load of hydraulic hose and hose end fittings, ¾ ” through 2” R1, R2, R12 and R13) (500 gallon oil reservoir tank) (homemade stake pointer, points and champers) (11 heavy duty bolt bins) (11 heavy duty shelves) (large amount of pallet racking) (misc. dispenser) (6’ hoist, no motor or drive)
__________________________________________________________________________________________
Terms: 10% Buyers Administrative Fee. 5.95% Buyers Administrative Fee if single lot is over 25,000.00. Cash, Checks or credit card will be accepted with proper ID. Credit Card purchases will be assessed an additional 3% Fee. All items are sold “As Is” unless guaranteed by the seller. Air Works Consignment Auction Ltd. acts only as an agent of the seller and assumes no responsibility for the seller statements. Buyers are encouraged to inspect items before bidding on them. All items are to be removed from premises by purchaser.
|
Previous Page Listing ID#: 53174
Live Auction with Online Bidding
