Jet Precision Bench Lathe

Jet 1240PD Model CT-1440G. 3HP 220/440V 3 Phase Gap Bed Lathe with 6" swing. 12"x40" Metal Lathe.  Comes with a 3 jaw chuck, carriage stop, toolbox, tool post and steady rest and coolant tank. Inch/Metric thread cutting. Appears to be in good condition but we are unable to test.

Rockwell Metal Lathe

Rockwell Precision Toolroom Metal Lathe. With a 3 jaw chuck, 12" x 36" . Model 25-100. 3 phase, variable speed. Comes with enclosed base, with chip guard. Appears in good condition, but we are unable to test.

Baldor Grinder

Baldor 1215W Grinder, 3 phase, 2HP, 1500/1800RPM, 50/60Hz. Comes with shields and tool trays and some accessories. Measures 30" wide. Appears in good condition but we are unable to test

Oster Pipemate

Oster Pipemate Pipe Threader. Serial # AEC582. 2" capacity portable threading machine. 110V.  Tested and we could not get it to power on.

Ridgid 400A Pipe Threader

Ridgid 400A Electric Power Pipe Threader Threading Machine. 110V, 1/4" to 2". Tested and powers on and appears to work as it should.

Wells Metal Band Saw

Wells Model 5M Metal Horizontal Band Saw. 110V. Tested and powered on and appears to work as it should.

Enco Horiztontal Band Saw

Enco Metal Cutting Horizontal band Saw. Model #137-3175. 7"x12", 1HP. Tested and powers on, missing blade, on a wheel base

Powermatic Vertical Band Saw

Powermatic Houdaille Model 143. 3 phase. 14" Wood/Metal Vertical Band Saw. Appears to be in good condition but unable to test.

Granite Surface Plate

24" x 36" x 4" granite surface plate. Grade B.

Cinncinnati Pedestal Grinder

Cincinnati Electric Tool Co 12" Pedestal Grinder 2Hp 3 phase. Has a 1/2HP 3 phase dust collector. Unable to test

Double Spindle Buffer

Tool Line Brown-Brockmeyer Co 38" double spindle buffer. Starter box is disconnected. Selling as is, unable to test

Peck Stow Wilcox Shear

32" Peck Stow Wilcox Foot Shear with table extension. Works, just needs oiled up

Enco Tool & Cutter Grinder

Enco model BM-450A, 1/2HP, 3 phase Universal Tool & Cutter Grinder. Comes with accessories. Looks to be in good condition, possibly never used, but we are unable to test.

6" 4 Jaw Lathe Chuck

6" 4 jaw lathe chuck with threaded back

10" 4 Jaw Lathe Chuck

10" 4 Jaw Lathe chuck with flat back. New with key, has some rust

8" 4 Jaw Lathe Chuck

8" 4 jaw Rohm Lathe Chuck w/ key. Made in Germany. New in box with some rust

6" 4 Jaw Lathe Chuck

6" 4 Jaw Lathe Chuck with flat back

Bison 4" 3 Jaw Chuck

Bison 4" 3 jaw chuck with 2 sets of jaws. New in box with some rust

8" 3 Jaw Lathe Chuck

8" 3 jaw lathe chuck w/ key, threaded back. New, just shows some rust

5" 3 Jaw Lathe chuck

5" 3 jaw lathe chuck, flat back, new just shows some rust

6-1/4" 3 Jaw Lathe Chuck

6-1/4" Lathe chuck flat back w/ key & extra jaws

Bison 5" 3 Jaw Lathe Chuck

Bison 5" 3 jaw Lathe Chuck w/ key & 2 sets of jaws. New in box, some rust

Rohm 3 Jaw Lathe Chuck

Rohm 6-1/4" 3 jaw flat back lathe chuck w/ key. New in box, made in Germany. Some rust

8" 3 Jaw Lathe Chuck

8" 3 Jaw Lathe chuck, flat back w/ key. New. With some rust

8" 4 Jaw Lathe Chuck

8" 4 jaw lathe chuck w/ key threaded with flat back

Tool Post Grinder

Chicago Hardware Foundry Co Model F1 Tool Post Grinder. Tested and works

Vee Blocks

Eron Neal Precision #122V v-block parallel and a Mule E-120.

Index Head w/ Tail Stock

Index head with tail stock

Vee Blocks

Set of 2 Vee blocks

4 Jaw Lathe Chuck

8-1/4" Cushman 4 Jaw Lathe Chuck w/ Cam Lock back

8-1/4" 4 Jaw Lathe Chuck

8-1/4" 4 jaw Lathe chuck w/ key, threaded back

Angle Plates

Set of 3 angle plates. 4" x 5" x 6". New, with some rust

Pair of Angle Plates

Pair of German Made Angle Plates. 3"x3"x3". New, with some rust

Angle Plate

Angle Plate - 8" x 4.5" x 5"

Slotted Angle Plates

Set of slotted angle plates. New with some rust. 4.5" x 3.5" x 3" and 4" x 2.5" x 3"

2 Angle Plates

2 Angle Plates - made in Germany. 6" x 6"x 6" and 5" x 5" x 5". New.

2 Angle Plates

Set of 2 Angle plates - new - 5"x4"x4" and 4"x4"x4"

Jack Screws

Lot includes 3 jack screws - Armstrong 6 ton #3, Simplex 2 ton #1P, and another Armstrong #3

Angle Plate

8"x8"x8" Angle Plate

Tool Post/ Tool Holder/etc

Lot includes - Williams #24-R Agrippa cutting off & side tool, Armstrong #4L, Armstrong #54, Armstrong #41, and a lathe tool post

Tool Holders

Lot includes - Williams 1-K Knurling Tool Holder, other tools holders, etc

Tool Holders & more

Lathe post, knurling tools & holders - Atlas threading tool, Armstrong #00K Knurling tool, Williams Cutting off & Side tool, and many others

Angle Sine Plate

Double Compund Angle Sine Plate. 12"x6"

Misc Tool Lot

Lot includes - various plug gages, GE Control Motor Starting Switch, drill bits, metal rules, and more

Boring Bar & Threading Tool

Armstrong Lathe 13" boring bar and threading tool

Lathe Boring Bars

Lot of 6 boring bars including a Williams #010

Tool Holders & Knurling Tools

Lot of lathe tool holders & knurling tools - Armstrong #51, Armstrong #T1-R, Williams #31-L, Armstrong 83-629, and others

Boring Bars/Cutting Heads/etc

Misc group of large mortising tools, boring bars, and gear cutting heads.

Lathe Tool Holders

Lot of Lathe tool holders

Cutters/Blade Inserts/etc

Misc nuts/bolts and cutter blade inserts and carbide boring cutters

Slotting Cutters/Boring Bars

Slotting cutters and assorted boring bars

Sly Cutters

Assorted sly cutters

End Mill Sets

2 End Mill Sets, neither are complete. See pictures

End Mills

Lot of assorted end mills

End Mills

Lot of assorted end mills - including double end, single end. Peg board not included

End Mills

Lot of assorted end mills - including single end, double end, ball. Peg board not included

End Mills

Lot of assorted end mills - tin coating for extra edge durability

 Bits, Cutter etc

Lot includes - various angle drill bits, a cutter collar remover set

End Mill Sets

Lot includes two 20 piece S/E Tin End Mill Sets

End Mill Sets

Lot includes a partial S/E Tin End Mill Set, and a AuCARB Carbide End Mill Set

Taps/Etc

Lot includes assorted threading taps, and assorted counterboring & countersinking

End Mills

2 End Mill Sets, neither are complete. See pictures

Broaching Set

Minute Man duMond Broach Set - not 100% complete but has extra pieces as well. Mostly DuMont, some others mixed in as well

End Mills

Lot of various end mills and drill bits

Drill bits/Reamers

Lot of various drills and reamers

Router Bits/Step Reamers

Assorted router bits and step reamers

Drill Bits

Assorted long drill bits and shank drill bits

Misc Tool Lot

Lot includes a rebuilt spindle of some sort and 1 2 3 blocks, a set of adjustable parallels

Magnetic Chuck & more

Lot includes a 7"x4" magnetic chuck and misc hardware

Hold Down Clamps/Studs/etc

Lot includes Hold down clamps, hold down blocks, hold down studs & tee nuts

Hold Down Clamps

Large milling machine hold down clamps

Growler + more

Lot includes a Crown Internal Growler, Federal Model 236B83 and some misc hardware,etc

Misc Bolts/Angles/etc

Lot includes alunimum angles, all thread, and misc bolts

Lapping Motor & Tooling

Lapping motor and tooling

Brass Shims

Lot of 4 Precision Brand brass shims - 17445, 17640, 17370, and 17390.

Cast Iron Surface Plates

Federal Model C21C has the indicator and 2 others that don’t have the indicators

Drill Chip Breaker & more

Lot includes - Command Drill Chip Breaker, a Hydraulic feed control, Black & Decker disc trimmer and various hardware

Angle Plates & more

Lot includes 2 Sperry Microline model 59Z1 Universal Waveguide Stand, angle plates, and more

Gage Indicator & more

Lot includes - Federal Model G81 gage indicator, Namco threaded rolling head, and more

Pair of Angle Plates

Lot of assorted parallels

Collet Holders & Broach Set

Lot of collet holders and hand broaching set

Steel Shims

Precision Brand steel shims - #16395, 16370 and 16660. new - could have some rust

Locking Devices/Hold Downs

Various clamp locking devices and milling machine hold downs,

Nuts/Bolts

Lot of misc bolts and coupling nuts, etc

Nuts/Bolts

Lot includes various nuts, hold down studs, T nuts, etc. Cabinet is included

End Mills

Lot of assorted end mills (some carbide)

Collet Lot

Various collets, R8 and 5C. Roughly 75+