Dresser-Rand
Previous Page Listing ID#: 263666

Auction Location

Wellsville, NY 14895
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Monday Mar 8, 10:00 AM
Bidding Ends: Thursday Mar 11, 4:58 PM
Auction Type
 Online Auction (shipping available)  VIEW ONLINE CATALOG
Company Information
Cincinnati Industrial Auctioneers, Inc.

Website: www.cia-auction.com

GoToAuction.com ID#: 8223
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
NOTICE: All Bidders and other persons attending this sale (“Bidders”) agree that they have read and have full knowledge of these terms and agree to be bound hereby. The Bidder identified by the Auctioneer as the high bidder or successful bidder at auction (“successful Bidder”) shall have entered into a legally binding contract to purchase the item bid upon (“Lot”) at the price and subject to the terms and conditions set forth herein. All determinations, rulings, and adjustments made by the Auctioneer in good faith shall be final, binding, and conclusive upon all Bidders. The term “Auctioneer” herein means Cincinnati Industrial Auctioneers, Inc. IDENTIFICATION - All Bidders are required to give full name and addresses at time of registration. DEPOSIT - Each successful Bidder will be required to make a deposit in cash or by bank cashier’s or certified check of 25 percent (25%) of the successful bid on each Lot at time of knockdown. In default of such deposit, the Lot may be put up again immediately and resold. TIME OF PAYMENT – Each successful Bidder shall receive an invoice during or at the conclusion of the auction. All invoices must be paid in full by the close of business on the last day of the auction sale and prior to removing any Lot. Any other arrangements must be made with auctioneer prior to bidding. In the absence of payment or agreement by the auctioneer, title to the Lot shall not transfer to the successful Bidder and such Bidder will lose any right, title or interest such Bidder may have acquired, and the deposit paid, if any, without further notice to such Bidder. The Bidder shall nonetheless remain liable for any damages caused by the Bidder’s failure to pay. REMOVAL - All purchases must be removed not later than the date specified in the Auction Catalogue and/or announced at the sale. No Lot can, on any account, be removed during the sale. All goods are sold “Where Is.” Removal shall be at the expense, risk, and liability of the successful Bidder. Purchases will be released only on presentation of paid invoice. Auctioneer shall not be responsible for Lots not removed within the time allowed, but Auctioneer shall have the option to remove and store at the expense and risk of the successful Bidder any article purchased, but not paid for and removed within the time required. MANNER OF PAYMENT – All payments must be made by cash, bank cashier’s check or company check with a bank letter of authorization guaranteeing funds to “Cincinnati Industrial Auctioneers, Inc.” All checks for deposits and balances due shall be payable to the order of “Cincinnati Industrial Auctioneers, Inc." All invoices must be paid to representatives of the Auctioneer at the auction site unless otherwise announced. The full purchase price on all Lots sold to the same successful Bidder must be paid within the time fixed and before removal of any Lot. DISCALIMER OF ALL WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR PARTICULAR PURPOSE; CONDITION OF ARTICLES SOLD – The Auctioneer and any owner, seller, or secured party make no warranties express or implied as to merchantability or fitness for purpose whatsoever. All such express or implied warranties are expressly excluded hereby. No oral statement or other writing by any person negates this exclusion. If you think you have received any assurance or warranty of any kind as to a Lot offered in this auction do not bid on such item unless the Auctioneer has signed a writing specifically directed to you and identifying the Lot and stating the modification of this exclusion The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any Lot, and makes no warranty in connection therewith. No sale will be set aside nor allowance made on account of any incorrectness, error in commentary, cataloging, or any imperfection not noted. No deduction, credit or avoidance shall be allowed on damaged articles, all Lots being exposed for public exhibition are purchased and accepted by successful Bidder “AS IS”, “WHERE IS” and “WITH ALL FAULTS”. Auctioneer makes no warranties or guarantees whatsoever whether written, oral or implied as to quality, quantity, condition, usability, salability, weight, measurement, age, model, mechanical condition, performance or other specifications and all sales made are utterly without recourse. CLAIMS – No Claims will be allowed after removal of Lots from premises. RESPONSIBILITY FOR NON-DELIVERY- Auctioneer, any owner, seller or secured party shall not, in any event, be liable to any Bidder for non-delivery of any Lot or for any other matter or thing, other than for the return to the successful Bidder of the deposit or sum paid on said Lot, should the successful Bidder be entitled thereto. This means that if are a successful Bidder and for any reason your Lot is not made available to you, you agree that the damages you may claim for such non-delivery are limited to the amounts you have paid and you waive any claim for damages for lost profits, opportunity, the value of the Lot in excess of the purchase price, your time, expenses, incidental and consequential damages, all of which are expressly waived. COMPLIANCE WITH TERMS OF SALE – In default of payment of invoices in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting successful Bidder. RISK TO PERSON AND PROPERTY – Persons attending during exhibition, sale, or removal of Lots assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefore and agree to indemnify and hold the Auctioneer harmless from any loss, claim, liability, cost, or expense caused all or in part by such person(s). Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the exhibition, sale, or removal of Lots is held. ADDITION TO OR WITHDRAWAL FROM SALE – The Auctioneer reserves the right to alter the order of the sale, withdrawal from the sale any of the Lots or parts thereof or to sell at this sale Lots not listed, and also reserves the right to group one or more Lots into one or more selling Lots or to subdivide into two or more selling Lots, or make any combination thereof which Auctioneer in its sole discretion determines. Whenever the best interest of the Seller will be served, the Auctioneer reserves the right to sell Lots in bulk. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE – Where items are sold by estimated weight, count, or measure, the successful Bidder will be invoiced for and required to pay for the estimated weight, count, or measure. If upon delivery any shortage exists, the successful Bidder will receive a credit at the rate of the bid. If there be an excess, the successful Bidder will be required to take and pay for such excess, at the rate of the bid. DISPUTE BETWEEN BIDDERS/BID INCREMENTS – If any dispute arises between two or more Bidders, the Auctioneer may decide the same or put the Lot up for sale again at once, or resell to the highest Bidder. The Auctioneer may reject a nominal or fractional bid advance in the Auctioneer’s sole discretion RESERVE – The Auctioneer reserves the right to reject any and all bids. On Lots upon which there is a reserve, the Auctioneer shall have the right to bid on behalf of the seller, owner or secured party and shall have no obligation to denote or announce such reserve or bid. RECORDS – The record of sale kept by the Auctioneer and bookkeeper will be taken as final in the event of any dispute. AGENCY – The Auctioneer is acting as agent only and is not responsible for the acts of its principals. SALES TAX – All sales are subject to state and local taxes, which will be collected from the successful Bidder unless a proper exemption certificate including tax-exempt number is presented at the time of payment. BUYER’S PREMIUM – The Auctioneer in its sole discretion may impose a Buyer’s Premium on any Lots sold. The Buyer’s Premium is a percentage that is added to the final purchase price of any Lot. SHIPPING – All coolants, oil and fluids must be drained from all machinery and equipment prior to removal. All of the above must be shipped in compliance with state and federal regulations. Unless otherwise expressly provided in writing, preparation and shipment shall be at the sole responsibility and cost of the successful Bidder. INSURANCE – All successful Bidders, or the their riggers must provide the Auctioneer and the owner of the premises of the sale a certificate of insurance in amounts acceptable to the Auctioneer prior to removal of any Lot. ADDITIONAL TERMS AND CONDITIONS – Except as set forth in Section 6 above, the Auctioneer may modify or supplement these terms and conditions of sale by language in the catalog available at the sale site or by announcement at the start of the sale.
Listing Information

Gantry Mills

·       Waldrich Coburg CNC Gantry Mill w/ 34’ x 11’ Table

·       Waldrich Coburg Model PMC 3000 AT-F17 CNC Gantry Mill w/ 23’ x 98” Table (Retrofitted Control 2014)

Large Capacity CNC Lathe & Cylindrical Grinder

·       90” x 32’ Safop Leonard Model 70/L-MC Large Capacity CNC Lathe with Milling & Y-Axis

·       40” x 240” Danobat Model RU6000-P Cylindrical Grinder

VTL’s & VBM’s

·       64”, 54”, 42”, 30” Bullard Cutmaster Vertical Turret Lathes w/ DRO’s

·       63” Dorries Vertical Turret Lathe

·       96” Dorries Vertical Boring Mill

·       (2) 55” Giddings & Lewis CNC Vertical Boring Mills w/ ATC

Lathes & Turret Lathes

·       32” x 16’ Leblond Model 3220-25 HD Engine Lathe

·       40” x 15’ American Gap Bed Engine Lathe

·       Warner & Swasey No. 4A Turret Lathe w/ 9.25” Thru Hole

·       Warner & Swasey No. 4A Turret Lathe w/ 8” Thru Hole

·       Warner & Swasey No. 3A Turret Lathe w/ 6” Thru Hole

·       (6) W & S No. 5, 4, 2A Turret Lathes

HBM’s & Radial Arm Drills

·       5” Giddings & Lewis CNC Horizontal Boring Mill w/ Fanuc Control

·       (4) Horizontal Boring Mills by G&L, Lucas, & Ceruti

·       9’ Arm x 15” Col.  Cincinnati Bickford Radial Arm Drill

·       (7) Radial Arm Drills by Cincinnati Bickford, Carlton & Ikeda

Bridge Cranes & Lifting

·       75 Ton/ 30 Ton x 60’ Approx. Span Virginia Crane Double Girder Top Running Overhead Bridge Crane

·       50 Ton / 15 Ton x 60’ Approx. Span Reading Double Girder Top Running Overhead Bridge Crane

·       5-Ton x 32’ Span Simmers Free-Standing Top Riding Single Girder Overhead Bridge Crane

·       (200 +/-) Column Mounted & Free-Standing Jib Cranes; Electric Chain Hoist w/ Pendant Controls, Up to 4-Ton

CNC & Toolroom

·       Toyoda Model FH100 CNC Horizontal Machining Center

·       (7) Niigata Model HN50C CNC Horizontal Machining Centers

·       (3) Sajo Vertical & Horizontal Mills

·       Davis Model 15 Keyseater

·       (2) Bridgeport Vertical Mills (1) EZ Trak

·       Cincinnati & Milwaukee Horizontal Mills w/ DRO’s

·       Large Amount of other Toolroom Machinery; Drill Presses, Drill Sharpeners, Tool & Cutter Grinders, DE Grinders, Bed Mills and More

·       Large Quantity of Machine Tooling & Accessories; Perishable Tooling, Tooling Cabinets, Vises, 40 & 50 Taper Toolholders, Angle Plates, Rotary Tables & More

Grinders – All Types

·       36’’ Blanchard Rotary Surface Grinder

·       Kellenberger Model 600U Universal Cylindrical Grinder w/ DRO

·       (2) Klingelnberg Gear Grinders

·       Klingelnberg Centering Machine

Blast Booth, Waterjet, & Plasma Table

·       28’ x 20’ x 13’ H Wheelabrator Air Blast Booth w/ Auger Floor Blast Pot, Dust Collector

·       8’ x 12’ PAR Waterjet Cutting Machine

·       8’ x 15’ MG Plasma Table w/ Hyper-Therm Plasma Supply

Fabrication Machinery

·       12 Ga. x 6’ WDM Model HTP-5-72 Hydraulic Initial Pinch Bending Roll

·       1/4” x 6’ Stamco Mechanical Shear

·       18 Ga. x 6’ Niagara Model 354-P Power Plate Rolls

·       DoAll Horizontal & Vertical Band Saws

·       (4) Apron & Finger Brakes

·       (10+/-) 3” Burr King Model 760 Vertical Belt Sanders

Furnaces & Misc. Machinery

·       144" x 96" W x 68" H Dempsey Industrial Gas Fired Furnace; 600-1800 Degree F.

·       18.5’L x 13’W x 9.5’ High Car Type Natural Type Furnace Oven

·       Rotating Lathe Flame Treating System w/ Positioner

·       38’’ Proceco Typhoon Batch Washer

·       Thrifty Am-Pak Model TP1824A Skin Packaging Machine

Welders

·       (25) Tig, Mig & Genset Welders by Miller, Lincoln, & ESAB

·       Acorn Welding Tables & HD Steel Welding Tables

·       (3) Miller Spectrum 701 Plasma Cutters

·       Welding Accessories Including Portable Fume Collectors, Curtains, & Clamps

MRO Surplus & Steel Inventory

·       Large Quantity of Timken & Assorted Bearings

·       Large Maintenance Cribs Loaded with; Electrical, Breakers, Switch Gear, Transistors, Resistors, Relays, Fuses, Fanuc Control Modules, Wire, Hose, Copper, Pipe Fittings, Hardware & Related

·       Steel Scrap Opportunity of Various Sheet and Bar Stock Steel

Inspection & Balancer

·       Faro Model S08 Portable CMM Arm; S/N S08059801274

·       Large Quantity of Inspection Including; Exacta Hardness Tester, Digital Height Gauges, Pin Gauge Sets, Parallels, Reftactometers, Gage Blocks, Machine Levels, Straight Edges, O.D Micrometers, Scales & More Inspection Equipment

·       Heidehain Shaft Check Master Machine

Air Compressor, Forklifts, & Shop Support Equipment

·       250 HP Ingersoll Rand Model R190NE-A Air Compressor (2017)

·       (5) Pipe Threaders by Ridgid & Oster up to 6” Capacity

·       (100 +/-) Modular Tool Cabinets Full of Various Types of Tooling

·       (3) Vertical Cardboard Balers

·       Shop Support Including; HD Strong Hold Cabinets, Fire Proof Cabinets, Dump Hoppers

·       (6) Conex-Type Storage Containers

·       22-HP Cushman Model 898459A LPG 4wd Full Ton Personnel Cart w/ Welder

·       (3) Forklifts up to 12,000 Lb Capacity by Hyster


Auction License: 2010000019 - Ohio
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Dresser-Rand

Cincinnati Industrial Auctioneers, Inc.

Cincinnati Industrial Auctioneers, Inc.


Contact:
Phone:
Sale Location
37 Coats St. 37 Coats St
Wellsville, NY 14895
Sale Dates and Times
Sale Terms and Conditions
NOTICE: All Bidders and other persons attending this sale (“Bidders”) agree that they have read and have full knowledge of these terms and agree to be bound hereby. The Bidder identified by the Auctioneer as the high bidder or successful bidder at auction (“successful Bidder”) shall have entered into a legally binding contract to purchase the item bid upon (“Lot”) at the price and subject to the terms and conditions set forth herein. All determinations, rulings, and adjustments made by the Auctioneer in good faith shall be final, binding, and conclusive upon all Bidders. The term “Auctioneer” herein means Cincinnati Industrial Auctioneers, Inc. IDENTIFICATION - All Bidders are required to give full name and addresses at time of registration. DEPOSIT - Each successful Bidder will be required to make a deposit in cash or by bank cashier’s or certified check of 25 percent (25%) of the successful bid on each Lot at time of knockdown. In default of such deposit, the Lot may be put up again immediately and resold. TIME OF PAYMENT – Each successful Bidder shall receive an invoice during or at the conclusion of the auction. All invoices must be paid in full by the close of business on the last day of the auction sale and prior to removing any Lot. Any other arrangements must be made with auctioneer prior to bidding. In the absence of payment or agreement by the auctioneer, title to the Lot shall not transfer to the successful Bidder and such Bidder will lose any right, title or interest such Bidder may have acquired, and the deposit paid, if any, without further notice to such Bidder. The Bidder shall nonetheless remain liable for any damages caused by the Bidder’s failure to pay. REMOVAL - All purchases must be removed not later than the date specified in the Auction Catalogue and/or announced at the sale. No Lot can, on any account, be removed during the sale. All goods are sold “Where Is.” Removal shall be at the expense, risk, and liability of the successful Bidder. Purchases will be released only on presentation of paid invoice. Auctioneer shall not be responsible for Lots not removed within the time allowed, but Auctioneer shall have the option to remove and store at the expense and risk of the successful Bidder any article purchased, but not paid for and removed within the time required. MANNER OF PAYMENT – All payments must be made by cash, bank cashier’s check or company check with a bank letter of authorization guaranteeing funds to “Cincinnati Industrial Auctioneers, Inc.” All checks for deposits and balances due shall be payable to the order of “Cincinnati Industrial Auctioneers, Inc." All invoices must be paid to representatives of the Auctioneer at the auction site unless otherwise announced. The full purchase price on all Lots sold to the same successful Bidder must be paid within the time fixed and before removal of any Lot. DISCALIMER OF ALL WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR PARTICULAR PURPOSE; CONDITION OF ARTICLES SOLD – The Auctioneer and any owner, seller, or secured party make no warranties express or implied as to merchantability or fitness for purpose whatsoever. All such express or implied warranties are expressly excluded hereby. No oral statement or other writing by any person negates this exclusion. If you think you have received any assurance or warranty of any kind as to a Lot offered in this auction do not bid on such item unless the Auctioneer has signed a writing specifically directed to you and identifying the Lot and stating the modification of this exclusion The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any Lot, and makes no warranty in connection therewith. No sale will be set aside nor allowance made on account of any incorrectness, error in commentary, cataloging, or any imperfection not noted. No deduction, credit or avoidance shall be allowed on damaged articles, all Lots being exposed for public exhibition are purchased and accepted by successful Bidder “AS IS”, “WHERE IS” and “WITH ALL FAULTS”. Auctioneer makes no warranties or guarantees whatsoever whether written, oral or implied as to quality, quantity, condition, usability, salability, weight, measurement, age, model, mechanical condition, performance or other specifications and all sales made are utterly without recourse. CLAIMS – No Claims will be allowed after removal of Lots from premises. RESPONSIBILITY FOR NON-DELIVERY- Auctioneer, any owner, seller or secured party shall not, in any event, be liable to any Bidder for non-delivery of any Lot or for any other matter or thing, other than for the return to the successful Bidder of the deposit or sum paid on said Lot, should the successful Bidder be entitled thereto. This means that if are a successful Bidder and for any reason your Lot is not made available to you, you agree that the damages you may claim for such non-delivery are limited to the amounts you have paid and you waive any claim for damages for lost profits, opportunity, the value of the Lot in excess of the purchase price, your time, expenses, incidental and consequential damages, all of which are expressly waived. COMPLIANCE WITH TERMS OF SALE – In default of payment of invoices in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting successful Bidder. RISK TO PERSON AND PROPERTY – Persons attending during exhibition, sale, or removal of Lots assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefore and agree to indemnify and hold the Auctioneer harmless from any loss, claim, liability, cost, or expense caused all or in part by such person(s). Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the exhibition, sale, or removal of Lots is held. ADDITION TO OR WITHDRAWAL FROM SALE – The Auctioneer reserves the right to alter the order of the sale, withdrawal from the sale any of the Lots or parts thereof or to sell at this sale Lots not listed, and also reserves the right to group one or more Lots into one or more selling Lots or to subdivide into two or more selling Lots, or make any combination thereof which Auctioneer in its sole discretion determines. Whenever the best interest of the Seller will be served, the Auctioneer reserves the right to sell Lots in bulk. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE – Where items are sold by estimated weight, count, or measure, the successful Bidder will be invoiced for and required to pay for the estimated weight, count, or measure. If upon delivery any shortage exists, the successful Bidder will receive a credit at the rate of the bid. If there be an excess, the successful Bidder will be required to take and pay for such excess, at the rate of the bid. DISPUTE BETWEEN BIDDERS/BID INCREMENTS – If any dispute arises between two or more Bidders, the Auctioneer may decide the same or put the Lot up for sale again at once, or resell to the highest Bidder. The Auctioneer may reject a nominal or fractional bid advance in the Auctioneer’s sole discretion RESERVE – The Auctioneer reserves the right to reject any and all bids. On Lots upon which there is a reserve, the Auctioneer shall have the right to bid on behalf of the seller, owner or secured party and shall have no obligation to denote or announce such reserve or bid. RECORDS – The record of sale kept by the Auctioneer and bookkeeper will be taken as final in the event of any dispute. AGENCY – The Auctioneer is acting as agent only and is not responsible for the acts of its principals. SALES TAX – All sales are subject to state and local taxes, which will be collected from the successful Bidder unless a proper exemption certificate including tax-exempt number is presented at the time of payment. BUYER’S PREMIUM – The Auctioneer in its sole discretion may impose a Buyer’s Premium on any Lots sold. The Buyer’s Premium is a percentage that is added to the final purchase price of any Lot. SHIPPING – All coolants, oil and fluids must be drained from all machinery and equipment prior to removal. All of the above must be shipped in compliance with state and federal regulations. Unless otherwise expressly provided in writing, preparation and shipment shall be at the sole responsibility and cost of the successful Bidder. INSURANCE – All successful Bidders, or the their riggers must provide the Auctioneer and the owner of the premises of the sale a certificate of insurance in amounts acceptable to the Auctioneer prior to removal of any Lot. ADDITIONAL TERMS AND CONDITIONS – Except as set forth in Section 6 above, the Auctioneer may modify or supplement these terms and conditions of sale by language in the catalog available at the sale site or by announcement at the start of the sale.
Listing Details

Gantry Mills

·       Waldrich Coburg CNC Gantry Mill w/ 34’ x 11’ Table

·       Waldrich Coburg Model PMC 3000 AT-F17 CNC Gantry Mill w/ 23’ x 98” Table (Retrofitted Control 2014)

Large Capacity CNC Lathe & Cylindrical Grinder

·       90” x 32’ Safop Leonard Model 70/L-MC Large Capacity CNC Lathe with Milling & Y-Axis

·       40” x 240” Danobat Model RU6000-P Cylindrical Grinder

VTL’s & VBM’s

·       64”, 54”, 42”, 30” Bullard Cutmaster Vertical Turret Lathes w/ DRO’s

·       63” Dorries Vertical Turret Lathe

·       96” Dorries Vertical Boring Mill

·       (2) 55” Giddings & Lewis CNC Vertical Boring Mills w/ ATC

Lathes & Turret Lathes

·       32” x 16’ Leblond Model 3220-25 HD Engine Lathe

·       40” x 15’ American Gap Bed Engine Lathe

·       Warner & Swasey No. 4A Turret Lathe w/ 9.25” Thru Hole

·       Warner & Swasey No. 4A Turret Lathe w/ 8” Thru Hole

·       Warner & Swasey No. 3A Turret Lathe w/ 6” Thru Hole

·       (6) W & S No. 5, 4, 2A Turret Lathes

HBM’s & Radial Arm Drills

·       5” Giddings & Lewis CNC Horizontal Boring Mill w/ Fanuc Control

·       (4) Horizontal Boring Mills by G&L, Lucas, & Ceruti

·       9’ Arm x 15” Col.  Cincinnati Bickford Radial Arm Drill

·       (7) Radial Arm Drills by Cincinnati Bickford, Carlton & Ikeda

Bridge Cranes & Lifting

·       75 Ton/ 30 Ton x 60’ Approx. Span Virginia Crane Double Girder Top Running Overhead Bridge Crane

·       50 Ton / 15 Ton x 60’ Approx. Span Reading Double Girder Top Running Overhead Bridge Crane

·       5-Ton x 32’ Span Simmers Free-Standing Top Riding Single Girder Overhead Bridge Crane

·       (200 +/-) Column Mounted & Free-Standing Jib Cranes; Electric Chain Hoist w/ Pendant Controls, Up to 4-Ton

CNC & Toolroom

·       Toyoda Model FH100 CNC Horizontal Machining Center

·       (7) Niigata Model HN50C CNC Horizontal Machining Centers

·       (3) Sajo Vertical & Horizontal Mills

·       Davis Model 15 Keyseater

·       (2) Bridgeport Vertical Mills (1) EZ Trak

·       Cincinnati & Milwaukee Horizontal Mills w/ DRO’s

·       Large Amount of other Toolroom Machinery; Drill Presses, Drill Sharpeners, Tool & Cutter Grinders, DE Grinders, Bed Mills and More

·       Large Quantity of Machine Tooling & Accessories; Perishable Tooling, Tooling Cabinets, Vises, 40 & 50 Taper Toolholders, Angle Plates, Rotary Tables & More

Grinders – All Types

·       36’’ Blanchard Rotary Surface Grinder

·       Kellenberger Model 600U Universal Cylindrical Grinder w/ DRO

·       (2) Klingelnberg Gear Grinders

·       Klingelnberg Centering Machine

Blast Booth, Waterjet, & Plasma Table

·       28’ x 20’ x 13’ H Wheelabrator Air Blast Booth w/ Auger Floor Blast Pot, Dust Collector

·       8’ x 12’ PAR Waterjet Cutting Machine

·       8’ x 15’ MG Plasma Table w/ Hyper-Therm Plasma Supply

Fabrication Machinery

·       12 Ga. x 6’ WDM Model HTP-5-72 Hydraulic Initial Pinch Bending Roll

·       1/4” x 6’ Stamco Mechanical Shear

·       18 Ga. x 6’ Niagara Model 354-P Power Plate Rolls

·       DoAll Horizontal & Vertical Band Saws

·       (4) Apron & Finger Brakes

·       (10+/-) 3” Burr King Model 760 Vertical Belt Sanders

Furnaces & Misc. Machinery

·       144" x 96" W x 68" H Dempsey Industrial Gas Fired Furnace; 600-1800 Degree F.

·       18.5’L x 13’W x 9.5’ High Car Type Natural Type Furnace Oven

·       Rotating Lathe Flame Treating System w/ Positioner

·       38’’ Proceco Typhoon Batch Washer

·       Thrifty Am-Pak Model TP1824A Skin Packaging Machine

Welders

·       (25) Tig, Mig & Genset Welders by Miller, Lincoln, & ESAB

·       Acorn Welding Tables & HD Steel Welding Tables

·       (3) Miller Spectrum 701 Plasma Cutters

·       Welding Accessories Including Portable Fume Collectors, Curtains, & Clamps

MRO Surplus & Steel Inventory

·       Large Quantity of Timken & Assorted Bearings

·       Large Maintenance Cribs Loaded with; Electrical, Breakers, Switch Gear, Transistors, Resistors, Relays, Fuses, Fanuc Control Modules, Wire, Hose, Copper, Pipe Fittings, Hardware & Related

·       Steel Scrap Opportunity of Various Sheet and Bar Stock Steel

Inspection & Balancer

·       Faro Model S08 Portable CMM Arm; S/N S08059801274

·       Large Quantity of Inspection Including; Exacta Hardness Tester, Digital Height Gauges, Pin Gauge Sets, Parallels, Reftactometers, Gage Blocks, Machine Levels, Straight Edges, O.D Micrometers, Scales & More Inspection Equipment

·       Heidehain Shaft Check Master Machine

Air Compressor, Forklifts, & Shop Support Equipment

·       250 HP Ingersoll Rand Model R190NE-A Air Compressor (2017)

·       (5) Pipe Threaders by Ridgid & Oster up to 6” Capacity

·       (100 +/-) Modular Tool Cabinets Full of Various Types of Tooling

·       (3) Vertical Cardboard Balers

·       Shop Support Including; HD Strong Hold Cabinets, Fire Proof Cabinets, Dump Hoppers

·       (6) Conex-Type Storage Containers

·       22-HP Cushman Model 898459A LPG 4wd Full Ton Personnel Cart w/ Welder

·       (3) Forklifts up to 12,000 Lb Capacity by Hyster

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Dresser-Rand
 Online Only Auction
Auction Date(s)
Bidding Starts: Monday Mar 8 , 10:00 AM
Bidding Ends: Thursday Mar 11 , 4:58 PM
Auction Location

Wellsville, NY 14895
Company
Cincinnati Industrial Auctioneers, Inc.

Website: www.cia-auction.com

Listing Terms and Conditions
NOTICE: All Bidders and other persons attending this sale (“Bidders”) agree that they have read and have full knowledge of these terms and agree to be bound hereby. The Bidder identified by the Auctioneer as the high bidder or successful bidder at auction (“successful Bidder”) shall have entered into a legally binding contract to purchase the item bid upon (“Lot”) at the price and subject to the terms and conditions set forth herein. All determinations, rulings, and adjustments made by the Auctioneer in good faith shall be final, binding, and conclusive upon all Bidders. The term “Auctioneer” herein means Cincinnati Industrial Auctioneers, Inc. IDENTIFICATION - All Bidders are required to give full name and addresses at time of registration. DEPOSIT - Each successful Bidder will be required to make a deposit in cash or by bank cashier’s or certified check of 25 percent (25%) of the successful bid on each Lot at time of knockdown. In default of such deposit, the Lot may be put up again immediately and resold. TIME OF PAYMENT – Each successful Bidder shall receive an invoice during or at the conclusion of the auction. All invoices must be paid in full by the close of business on the last day of the auction sale and prior to removing any Lot. Any other arrangements must be made with auctioneer prior to bidding. In the absence of payment or agreement by the auctioneer, title to the Lot shall not transfer to the successful Bidder and such Bidder will lose any right, title or interest such Bidder may have acquired, and the deposit paid, if any, without further notice to such Bidder. The Bidder shall nonetheless remain liable for any damages caused by the Bidder’s failure to pay. REMOVAL - All purchases must be removed not later than the date specified in the Auction Catalogue and/or announced at the sale. No Lot can, on any account, be removed during the sale. All goods are sold “Where Is.” Removal shall be at the expense, risk, and liability of the successful Bidder. Purchases will be released only on presentation of paid invoice. Auctioneer shall not be responsible for Lots not removed within the time allowed, but Auctioneer shall have the option to remove and store at the expense and risk of the successful Bidder any article purchased, but not paid for and removed within the time required. MANNER OF PAYMENT – All payments must be made by cash, bank cashier’s check or company check with a bank letter of authorization guaranteeing funds to “Cincinnati Industrial Auctioneers, Inc.” All checks for deposits and balances due shall be payable to the order of “Cincinnati Industrial Auctioneers, Inc." All invoices must be paid to representatives of the Auctioneer at the auction site unless otherwise announced. The full purchase price on all Lots sold to the same successful Bidder must be paid within the time fixed and before removal of any Lot. DISCALIMER OF ALL WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR PARTICULAR PURPOSE; CONDITION OF ARTICLES SOLD – The Auctioneer and any owner, seller, or secured party make no warranties express or implied as to merchantability or fitness for purpose whatsoever. All such express or implied warranties are expressly excluded hereby. No oral statement or other writing by any person negates this exclusion. If you think you have received any assurance or warranty of any kind as to a Lot offered in this auction do not bid on such item unless the Auctioneer has signed a writing specifically directed to you and identifying the Lot and stating the modification of this exclusion The Auctioneer shall not be responsible for the correct description, genuineness, authenticity of, or defect in any Lot, and makes no warranty in connection therewith. No sale will be set aside nor allowance made on account of any incorrectness, error in commentary, cataloging, or any imperfection not noted. No deduction, credit or avoidance shall be allowed on damaged articles, all Lots being exposed for public exhibition are purchased and accepted by successful Bidder “AS IS”, “WHERE IS” and “WITH ALL FAULTS”. Auctioneer makes no warranties or guarantees whatsoever whether written, oral or implied as to quality, quantity, condition, usability, salability, weight, measurement, age, model, mechanical condition, performance or other specifications and all sales made are utterly without recourse. CLAIMS – No Claims will be allowed after removal of Lots from premises. RESPONSIBILITY FOR NON-DELIVERY- Auctioneer, any owner, seller or secured party shall not, in any event, be liable to any Bidder for non-delivery of any Lot or for any other matter or thing, other than for the return to the successful Bidder of the deposit or sum paid on said Lot, should the successful Bidder be entitled thereto. This means that if are a successful Bidder and for any reason your Lot is not made available to you, you agree that the damages you may claim for such non-delivery are limited to the amounts you have paid and you waive any claim for damages for lost profits, opportunity, the value of the Lot in excess of the purchase price, your time, expenses, incidental and consequential damages, all of which are expressly waived. COMPLIANCE WITH TERMS OF SALE – In default of payment of invoices in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting successful Bidder. RISK TO PERSON AND PROPERTY – Persons attending during exhibition, sale, or removal of Lots assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefore and agree to indemnify and hold the Auctioneer harmless from any loss, claim, liability, cost, or expense caused all or in part by such person(s). Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the exhibition, sale, or removal of Lots is held. ADDITION TO OR WITHDRAWAL FROM SALE – The Auctioneer reserves the right to alter the order of the sale, withdrawal from the sale any of the Lots or parts thereof or to sell at this sale Lots not listed, and also reserves the right to group one or more Lots into one or more selling Lots or to subdivide into two or more selling Lots, or make any combination thereof which Auctioneer in its sole discretion determines. Whenever the best interest of the Seller will be served, the Auctioneer reserves the right to sell Lots in bulk. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE – Where items are sold by estimated weight, count, or measure, the successful Bidder will be invoiced for and required to pay for the estimated weight, count, or measure. If upon delivery any shortage exists, the successful Bidder will receive a credit at the rate of the bid. If there be an excess, the successful Bidder will be required to take and pay for such excess, at the rate of the bid. DISPUTE BETWEEN BIDDERS/BID INCREMENTS – If any dispute arises between two or more Bidders, the Auctioneer may decide the same or put the Lot up for sale again at once, or resell to the highest Bidder. The Auctioneer may reject a nominal or fractional bid advance in the Auctioneer’s sole discretion RESERVE – The Auctioneer reserves the right to reject any and all bids. On Lots upon which there is a reserve, the Auctioneer shall have the right to bid on behalf of the seller, owner or secured party and shall have no obligation to denote or announce such reserve or bid. RECORDS – The record of sale kept by the Auctioneer and bookkeeper will be taken as final in the event of any dispute. AGENCY – The Auctioneer is acting as agent only and is not responsible for the acts of its principals. SALES TAX – All sales are subject to state and local taxes, which will be collected from the successful Bidder unless a proper exemption certificate including tax-exempt number is presented at the time of payment. BUYER’S PREMIUM – The Auctioneer in its sole discretion may impose a Buyer’s Premium on any Lots sold. The Buyer’s Premium is a percentage that is added to the final purchase price of any Lot. SHIPPING – All coolants, oil and fluids must be drained from all machinery and equipment prior to removal. All of the above must be shipped in compliance with state and federal regulations. Unless otherwise expressly provided in writing, preparation and shipment shall be at the sole responsibility and cost of the successful Bidder. INSURANCE – All successful Bidders, or the their riggers must provide the Auctioneer and the owner of the premises of the sale a certificate of insurance in amounts acceptable to the Auctioneer prior to removal of any Lot. ADDITIONAL TERMS AND CONDITIONS – Except as set forth in Section 6 above, the Auctioneer may modify or supplement these terms and conditions of sale by language in the catalog available at the sale site or by announcement at the start of the sale.
File Attachments

Gantry Mills

·       Waldrich Coburg CNC Gantry Mill w/ 34’ x 11’ Table

·       Waldrich Coburg Model PMC 3000 AT-F17 CNC Gantry Mill w/ 23’ x 98” Table (Retrofitted Control 2014)

Large Capacity CNC Lathe & Cylindrical Grinder

·       90” x 32’ Safop Leonard Model 70/L-MC Large Capacity CNC Lathe with Milling & Y-Axis

·       40” x 240” Danobat Model RU6000-P Cylindrical Grinder

VTL’s & VBM’s

·       64”, 54”, 42”, 30” Bullard Cutmaster Vertical Turret Lathes w/ DRO’s

·       63” Dorries Vertical Turret Lathe

·       96” Dorries Vertical Boring Mill

·       (2) 55” Giddings & Lewis CNC Vertical Boring Mills w/ ATC

Lathes & Turret Lathes

·       32” x 16’ Leblond Model 3220-25 HD Engine Lathe

·       40” x 15’ American Gap Bed Engine Lathe

·       Warner & Swasey No. 4A Turret Lathe w/ 9.25” Thru Hole

·       Warner & Swasey No. 4A Turret Lathe w/ 8” Thru Hole

·       Warner & Swasey No. 3A Turret Lathe w/ 6” Thru Hole

·       (6) W & S No. 5, 4, 2A Turret Lathes

HBM’s & Radial Arm Drills

·       5” Giddings & Lewis CNC Horizontal Boring Mill w/ Fanuc Control

·       (4) Horizontal Boring Mills by G&L, Lucas, & Ceruti

·       9’ Arm x 15” Col.  Cincinnati Bickford Radial Arm Drill

·       (7) Radial Arm Drills by Cincinnati Bickford, Carlton & Ikeda

Bridge Cranes & Lifting

·       75 Ton/ 30 Ton x 60’ Approx. Span Virginia Crane Double Girder Top Running Overhead Bridge Crane

·       50 Ton / 15 Ton x 60’ Approx. Span Reading Double Girder Top Running Overhead Bridge Crane

·       5-Ton x 32’ Span Simmers Free-Standing Top Riding Single Girder Overhead Bridge Crane

·       (200 +/-) Column Mounted & Free-Standing Jib Cranes; Electric Chain Hoist w/ Pendant Controls, Up to 4-Ton

CNC & Toolroom

·       Toyoda Model FH100 CNC Horizontal Machining Center

·       (7) Niigata Model HN50C CNC Horizontal Machining Centers

·       (3) Sajo Vertical & Horizontal Mills

·       Davis Model 15 Keyseater

·       (2) Bridgeport Vertical Mills (1) EZ Trak

·       Cincinnati & Milwaukee Horizontal Mills w/ DRO’s

·       Large Amount of other Toolroom Machinery; Drill Presses, Drill Sharpeners, Tool & Cutter Grinders, DE Grinders, Bed Mills and More

·       Large Quantity of Machine Tooling & Accessories; Perishable Tooling, Tooling Cabinets, Vises, 40 & 50 Taper Toolholders, Angle Plates, Rotary Tables & More

Grinders – All Types

·       36’’ Blanchard Rotary Surface Grinder

·       Kellenberger Model 600U Universal Cylindrical Grinder w/ DRO

·       (2) Klingelnberg Gear Grinders

·       Klingelnberg Centering Machine

Blast Booth, Waterjet, & Plasma Table

·       28’ x 20’ x 13’ H Wheelabrator Air Blast Booth w/ Auger Floor Blast Pot, Dust Collector

·       8’ x 12’ PAR Waterjet Cutting Machine

·       8’ x 15’ MG Plasma Table w/ Hyper-Therm Plasma Supply

Fabrication Machinery

·       12 Ga. x 6’ WDM Model HTP-5-72 Hydraulic Initial Pinch Bending Roll

·       1/4” x 6’ Stamco Mechanical Shear

·       18 Ga. x 6’ Niagara Model 354-P Power Plate Rolls

·       DoAll Horizontal & Vertical Band Saws

·       (4) Apron & Finger Brakes

·       (10+/-) 3” Burr King Model 760 Vertical Belt Sanders

Furnaces & Misc. Machinery

·       144" x 96" W x 68" H Dempsey Industrial Gas Fired Furnace; 600-1800 Degree F.

·       18.5’L x 13’W x 9.5’ High Car Type Natural Type Furnace Oven

·       Rotating Lathe Flame Treating System w/ Positioner

·       38’’ Proceco Typhoon Batch Washer

·       Thrifty Am-Pak Model TP1824A Skin Packaging Machine

Welders

·       (25) Tig, Mig & Genset Welders by Miller, Lincoln, & ESAB

·       Acorn Welding Tables & HD Steel Welding Tables

·       (3) Miller Spectrum 701 Plasma Cutters

·       Welding Accessories Including Portable Fume Collectors, Curtains, & Clamps

MRO Surplus & Steel Inventory

·       Large Quantity of Timken & Assorted Bearings

·       Large Maintenance Cribs Loaded with; Electrical, Breakers, Switch Gear, Transistors, Resistors, Relays, Fuses, Fanuc Control Modules, Wire, Hose, Copper, Pipe Fittings, Hardware & Related

·       Steel Scrap Opportunity of Various Sheet and Bar Stock Steel

Inspection & Balancer

·       Faro Model S08 Portable CMM Arm; S/N S08059801274

·       Large Quantity of Inspection Including; Exacta Hardness Tester, Digital Height Gauges, Pin Gauge Sets, Parallels, Reftactometers, Gage Blocks, Machine Levels, Straight Edges, O.D Micrometers, Scales & More Inspection Equipment

·       Heidehain Shaft Check Master Machine

Air Compressor, Forklifts, & Shop Support Equipment

·       250 HP Ingersoll Rand Model R190NE-A Air Compressor (2017)

·       (5) Pipe Threaders by Ridgid & Oster up to 6” Capacity

·       (100 +/-) Modular Tool Cabinets Full of Various Types of Tooling

·       (3) Vertical Cardboard Balers

·       Shop Support Including; HD Strong Hold Cabinets, Fire Proof Cabinets, Dump Hoppers

·       (6) Conex-Type Storage Containers

·       22-HP Cushman Model 898459A LPG 4wd Full Ton Personnel Cart w/ Welder

·       (3) Forklifts up to 12,000 Lb Capacity by Hyster