Equipment Showcase Auction
Previous Page Listing ID#: 241733

Auction Location

Middlebury, IN 46540
Auction Dates and TimesSALE IS COMPLETED
Thursday Dec 31, 2020 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
: Cash, check, or major credit card(with 2% con. fee). 10% buyers premium applies to onsite bidders. 13% buyers premium online , 7% sales tax will be in effect , buyers are welcome to fill out a valid exemption. All items are sold without reserve. 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Information
.Equipment Showcase Auction
Skidloaders ~ Excavating~ Construction Equipment
At Absolute Auction!



Consign now
for FREE
advertising!
Consignments are
wanted including:
• Contractor’s Equipment
• Excavating Equipment
• Trailers
• Skidloaders
• Power Tools

John Deere
4640 Tractor
1994 Ford
F-150
Gehl DL6L-42 Telehandler Equipment Trailer
1997 GM

00
Information Lot
Onsite auction is set to start at 9 Am with Power tools with the online portion starting at 9:30. All items are pick-up only and are located at 11751 CR 12 Middlebury IN 46540. Loadout will be available on day of auction until dark, Jan. 1st & 2nd from 8 AM to 2 PM. The following week Monday to Friday 8 AM to 4 PM. After that it is by appointment only by calling Bronson at 574-210-3721 All items must be picked up within 30 days. 

199
Diecast Kenworth Semi and Knuckleboom Log Trailer
Diecast Kenworth Semi and Knuckleboom Log Trailer with logs.  

1
test

200
Honda Water Pump
Honda Water pump model 6X25 with a 4-stroke engine. It is in good running condition with new hose in box.  

201
Honda Powered Water Pump Low Hours!
Honda WB30XT water pump with a Honda GX160. It has less than 5 hours of total tunning time,  In excellent running condition.  

202
Honda Powered Water Pump Low Hours!
Honda WB20X water pump with a Honda GX20X engine, Under 2 hours of total running time.  In Excellent working condition.  

203
Honda Trash pump
Honda WB15 trash pump with a 2.2 horsepower motor in running condition. 

204
Honda Trash pump
Honda WT30X Trash Pump powered by a GX240 242cc  4-stroke gas engine, in good running condition with 3'' suction hose. 

8
Storage Trailer

205
Sand Blaster
Sand Blaster on cart with hood in good working condition. 

206
Dewalt Ready Heater
Dewalt DXH215HD ready heater, 215'000 BTU, 14 gallon fuel capacity, can run on either kerosene or diesel. It has very little use and is in almost new condition.

207
Dewalt Ready Heater
Dewalt DXH190HD ready heater,  190'000 BTU, 14 gallon fuel capacity, can run on either kerosene or diesel. It has very little use and is in almost new condition.  

208
Charge Air Pro Air Compressor
Charge Air Pro air compressor by Ingersoll-Rand.  It has a 5 horsepower 3-phase 230 volt electric motor, 80 gallon tank, 2 clyinder.  In good working condition.

209
Quincy QT-5 Air Compressor
Quincy QT-5 air compressor with approximately a 100 gallon tank and has a 3 phase 5 horse power Baldor motor, upright twin cylinder, just serviced.  Serial number 5058989

210
Ingersoll Rand Air Compressor
Ingersoll Rand air compressor with a 3 phase 10 horsepower motor. It is a twin cylinder and has a 120 gallon tank, 230 volt and can be wired for 480,  just serviced,   Serial number  0809150058

211
Dewalt Air Compressor Low Hours
Dewalt  Airt Compressor powered by a Honda GX160 gas engine, dual tanks, 8 gallon capacity, just serviced and runs good, very low hours, 

212
Craftsman Radial Arm Saw
Craftsman 10'' Radial Arm Saw in almost new condition only used a handful of times.  

213
Rigid Pipe Bender/Threader
Manual Rigid pipe bender and threader with dies,  Model 450

214
Panel Saw
Panel Saw with Rockwell saw, extra blades included, in good working condition.  

215
Echo TC-2100 Cultivator
Echo TC-2100 Cultivator powered by a 2-stroke engine, it has a 9'' wide cut in running condition. 

216
Ariens Snow Blower
Ariens Snow Blower, 5 horse power with a 22'' cut, 2-stroke gas engine, single stage, in running condition, Serial number 938017

217
Ariens Path Pro Snow Blower
Ariens Path Pro Snow Blower, 136cc 4-stroke gas engine, 21'' cut, single stage chute, recoil start, in good running condition, 

218
Ariens Path Pro Snow Blower
Ariens Path Pro Snow Blower, 136cc 4-stroke gas engine, 21'' cut, single stage chute, recoil start, in good running condition,

219
Mainline Garden Tractor with Quick Hitch
6 LD 400 Lombardini diesel engine, differential drive, 4 speed forward 1 speed reverse, electric start, includes 2 adjustable tiller boxes 18"-30", small set of wheels, 2 way log splitter, 54" sickle mower and a dump trailer, everything works like it should 

220
Log Splitter
MTD Log Splitter with a ram force of up to 25 tons.  It is powered by a Briggs and Stratton 8 horsepower engine.  

221
Miller Big Blue 250D Welder
Miller Big Blue 250D diesel powered welder.  It is powered by a Duetz diesel engine that puts out 20 Kw, it has 4917 hours, it is on a trailer, comes with leads and cables, has electric start, sells with bill of sale.   In good working condition.  

222
Allen Vibrating Concrete Screed
Allen Vibrating Concrete Screed Model 12.  It is air driven, approximately 45' long, in good working condition.  

223
Herkules K-900 Portable Auto Lift
Herkules K-900 Portable Auto Lift. Drive on lift with 6'000 lb capacity, Air operated with airbags underneath, Lifts 30'' from the ground, in good working condition, comes with manual.

224
Retaining Wall Blocks
Retaining Wall blocks, measures 40'' high, 46'' wide, and 72'' long.  Weight is approximately 3'000 lbs each, 11 pieces total, some do have cracks, decorative design on the front side, 

225
Lockers
3 sets of lockers with 3 lockers in each set.   Each section is 36'' wide and 15'' deep and they stand 77'' high.  The each have hooks and a shelf and are pad lock ready.  

226
Portable Board Edger
Portable Board Edger with return, 4'' X 32'' capacity, It has 1 blower mounted that is 24'', also has hydraulic controls and has new blades.    

227
E-Z Chop Slab Saw
E-Z chop Slab Saw, all manual with 20'' X 8 1/2' in feed. 

31
John Deere 544-B Wheel Loader
John Deere 544-B Wheel Loader with forks and bucket and currently has 5'800 hours, It has a straight 6 cylinder diesel engine, 4-wheel drive, full cab with heat, windows do open and the tires are bald.  

228
Belt Conveyor
16'' X 6' belt conveyor, hydraulic drive. 

229
Gear Box
Right angle gear box.

230
Transfer Deck
3-strand transfer deck, 5' wide X 12' long, hydraulic drive, 

231
Belt Conveyor
20'' wide X 14' long belt conveyor, hydraulic drive. 

232
Hydraulic Pump Station
Hydraulic Pump Station, with 2 vane type pumps mounted on jack shaft.  1 Hydraulic motor with vickers relief valves. 

233
Baker Incline Conveyor
Baker Incline Conveyor,  14' long, 28'' wide, electric drive, 3 phase

234
Conquest Reversing Auger
Conquest Reversing Auger, 12' long and 12'' wide, 2 HP electric Baldor Motor. 

235
Military Notcher
Military Notcher,  1'' dado, 5 hp electric motor, 3-phase, 10' long, 6'' wide roller conveyor. 

236
Brettrager Bolt Mill
Brettrager Bolt Mill, holds up to a 84'' log, 36'' inserted tooth blade, hydraulic drive table,  It has a 40 hp 3-phase electric motor and is in working condition.  

237
Hannah/West Plains Scrag Mill
Hannah (West Plains) Scrag Mill with dual 36'' inserted tooth blades,  adjustable width, dual 50 hp electric motors.  

238
Snow Bucket Repair Station
Snow Bucket Repair Station, It is fully hydraulic to lift and rotate various sizes of snow buckets for repair and extends and retracts to accommodate different widths of buckets and snow pushers.  It was in working condition when last used. 

239
7Y Box style Debris Box

239A
3 YWC Trash Hopper
3 YWC Trash Hopper with skid loader attachment

240
2 YWC Trash Hopper
2 YWC Trash Hopper with fork pockets, self dumping

241
2 YWC Trash Hopper
2 YWC Trash Hopper with fork pockets, self dumping 

242
SMLDW 2.0
SMLDW 2.0  hopper set up for skid loader quick attach

243
SMLDW 2.0
SMLDW 2.0 hopper set up for skid loader quick attach 

244
Cattle Feeder
Cattle Feeder Blue

245
Cattle Feeder
Cattle Feeder Blue

246
Cattle Feeder
Cattle Feeder Blue

247
Cattle Feeder
Cattle Feeder Blue

248
Cattle Feeder
Cattle Feeder Blue

249
Cattle Feeder
Cattle Feeder Blue

250
Cattle Feeder
Cattle Feeder Blue

56
Case SR200 Skid Loader
2016 Case SR200 Skid Loader powered by a 4 cylinder turbo charged diesel engine rated at 74 horse power and only 1642 hours.  It has a full cab with heat and air conditioning, auxiliary hydraulics, quick attach, radio, lift capacity of 2'000 lbs, It has been recently serviced and everything works as it should.   Does not sell with attachments, Product ID number JAT-SR200CGM414449    

251
Cattle Feeder
Cattle Feeder Blue

252
Cattle Feeder
Cattle Feeder Blue

253
Cattle Feeder
Cattle Feeder Blue

254
Cattle Feeder
Cattle Feeder Blue

255
Cattle Feeder
Cattle Feeder Blue

256
Cattle Feeder
Cattle Feeder Blue

257
Cattle Feeder
Cattle Feeder Blue

258
Cattle Feeder
Cattle Feeder Orange

259
Cattle Feeder
Cattle Feeder Orange

260
Cattle Feeder
Cattle Feeder Orange

261
Cattle Feeder
Cattle Feeder Orange

264

262
Cattle Feeder
Cattle Feeder Orange

263
Cattle Feeder
Cattle Feeder Orange

265
3/8" AR500 Steel Deer Shooting Target with Heart Flapper

266
3/8" AR500 Steel Coyote Shooting Target with Heart Flapper

267
3/8" AR500 Steel Wild Boar Shooting Target with Heart Flapper

268
AR 500 Steel Dueling Tree for .22 Caliber

269
AR 500 Steel Dueling Tree for .22 Caliber

270
AR 500 Steel Dueling Tree for .22 Caliber

271
AR 500 Steel Dueling Tree for .22 Caliber

272
AR 500 Steel Dueling Tree Shooting Target 3/8"

273
AR 500 Steel Dueling Tree Shooting Target 3/8"

274
AR 500 Steel Dueling Tree Shooting Target 3/8"

275
AR 500 Steel Dueling Tree Shooting Target 3/8"

276
29" X 90" Steel Work Bench

277
29" X 90" Steel Work Bench

278
29" X 90" Steel Work Bench

279
29" X 90" Steel Work Bench

280
29" X 90" Steel Work Bench

281
29" X 90" Steel Work Bench

281A
29" X 60" Work Bench

281B
29" X 60" Work Bench

281C
29" X 60" Work Bench

281D
29" X 60" Work Bench

281E
29" X 60" Work Bench

281F
30" X 57" Small Table 5/16" Black

282
30" X 57" Small Table 5/16" Black

283
30" X 57" Small Table 5/16" Black

284
30" X 57" Small Table 5/16" Black

285
30" X 57" Small Table 5/16" Black

287
30" X 57" Small Table 5/16" Black

286
30" X 57" Small Table 5/16" Black

288
5/8" Steel Plate / Road Plate
5/8" Steel Plate / Road Plate  3 pieces  60" X 120"

289
1/4" Steel Plate / Road Plate
1/4" Steel Plate / Road Plate 6 pieces  73"X 123"

290
1/4" Steel Plate / Road Plate
1/4" Steel Plate / Road Plate 6 pieces 73"X 123"

290A
1/4" Steel Plate / Road Plate
1/4" Steel Plate / Road Plate 6 pieces 73"X 123"

291
Brine Tank 1'000 Gallon
Brine Tank 1'000 gallon with lid

292
Brine Tank 1'000 Gallon
Brine Tank 1'000 gallon with lid

293
Brine Tank 1'000 Gallon
Brine Tank 1'000 gallon with lid

294
Brine Tank 300 Gallon
Brine Tank 300 gallon with lid

295
100' Belt Conveyor
100' Belt Conveyor with 10' sections.  Belt is 24'' wide and comes with electric drive 3HP 3-phase Baldor Electric Motor. 

296
Oliver Edger
Oliver Edger with up to 9" opening plus infeed, 16" inserted tooth blades, one of which is moveable and one is moveable. 25HP 3-phase motor.  

297
Morbark Chipper
Morbark Chipper, 48", 6 knife, side feed, top discharge, with infeed, good unit.  

298
30" Dust Blower
30" Dust blower in good condition, hydraulic drive. 

299
Shipping Container
8' X 20' Shipping Container. It is 8 1/2' high, has double rear doors and weighs approximately 5'000 lbs.  It could also be useful for storage.

300
Shipping Container
8' X 20' Shipping Container. It is 8 1/2' high, has double rear doors and weighs approximately 5'000 lbs. It could also be useful for storage.

301
Ingersoll Rand Air Compressor
Ingersoll Rand T30 air compressor.  It has a 120 gallon capacity air tank, twin cast iron cylinders, 3-phase 10 horsepower electric motor.  It is in good working condition.  

302
Torch set
Oxy-Acetylene torch set that is on a cart and includes the torch, hoses and gauges.   

303
Torch set
Oxy-Acetylene torch set that includes tanks, hoses, torch and gauges.  No cart.  

304
Cantek Wide Belt Sander
37" single head, hydraulic and air controlled, needs some repairs, made in Canada

305
Zenith Scissor Lift/Pallet Jack*
Serial # ZMSL-31831, 2200 lb. lift, 32" max height

306
MTD Snow Blower
MTD Snow Blower that makes a 28'' cut and powered by a 277cc 4-stroke engine and has electric start with recoil back up.   It has 6 forward speed and 2 reverse.  It is in good running condition.   

310
6' Werner Aluminum Step Ladder

311
8' Keller Fiberglass Step Ladder

312
Otter Sport Kayak
Otter Sport Kayak that comes with paddle and life vest. 

313
Cub Cadet RT65 Tiller
Cub Cadet RT65 Tiller with a Honda GC190 engine with dual directional tines.  In good condition.  

314
Predator 4000 Generator
Predator 4000 Generator.   3'200 running watts with 4'000 watt peak.  212cc predator engine in good condition.  

315
Workbench with Vice

316
Rockwell Table Saw
Rockwell 10" Table Saw in good condition.

317
Skil Saw Chop Saw
Skil Saw Chop Saw in good condition

318
Lawn Roller 38"
38" plastic lawn roller in condition 

319
6 Gallon Air Compressor
6 Gallon Air Compressor, single phase, 120 volt, comes with new Senco 1/4'' 50' air hose.  

320
Portable Meadows Saw Mill
Portable Meadows Saw Mill that does have air dogs and manual set works, It does need some repair and belts.  

321
Sullair Air Compressor
Sullair Air Compressor,  185 CFM, 4 cylinder GM gas engine, 1252 hours,  pintle hitch, in good running condition.  Serial Number 810-410

322
Dayton Ready Heater
Dayton Ready Heater, kerosene or diesel power, 210'000 BTU.   In good working condition.  

323
Ingersoll Rand Compressor Cylinders
Ingersoll Rand Compressor Cylinders, 2 cylinder, model 2475, SN 30TC940505

324
Honda GX160 Engine
Honda GX160 engine, V-twin, 18 HP, side shaft and electric start, recently serviced and in working condition.  

325
Husqvarna Chain Saw
Husqvarna Chain Saw  345, 15" bar, 2-stroke engine, has a brake issue, running condition,   

326
Organizers and File Cabinet
Organizers and File cabinet all in one lot 

327
John Deere Lawn Sweep
John Deere Lawn Sweep in good operating condition.   

328
JET Metal Band Saw
Jet Metal Band Saw.   Electric drive, 3/4 hp, in working condition.  

329
Delta Rockwell Drill Press
Delta Rockwell Drill Press,  1/3 hp electric motor, in working condition.

330
Bench Grider
Bench Grinder / Chain Sharpener.   

331
Billy Goat Leaf Vac
Billy Goat Leaf Vac with a 5 HP Briggs and Stratton engine, Just serviced this year but has not been used since.    

332
2 New Cupolas
2 New Cupolas for your next building project.  new and not used 

333
9 Boxes of Cedar Shake Siding, New
9 Boxes of Cedar Shake Siding.  Autumn Red color, siding is New.  

334
Work Light
Very bright work light in good condition. 

335
Scaffolding Pieces
6 pieces of scaffolding, good condition. 

336
Oil Tank With Hose
Oil Tank with hose on retractable reel, Tank has approximately 10-15 gallons of 15W-40

337
Grease Hose
Grease hose on retractable reel. 

338
Steel Workbench and Contents
Steel Workbench and Contents 

515A

339
Box of Misc Wrenches
Box of Misc wrenches, various sizes and brands

340
2 boxes of sockets
2 boxes of sockets, various sizes and brands 

341
1" Drive Socket Set
1" Drive socket set, various sizes

342
FMC Rivet Press
FMC Air Powered Rivet Press,   120-160 psi, model B-85  Serial number 2312

343
Crate of Organizers
Crate of Organizers with misc parts, pieces and fittings, 

344
Bench Vice
Bench Vice with 6" Jaw.

345
Large Prentice Vice
Large Vice by Prentice Vice Company,   No,. 56

346
Pallet of Belts
Pallet of MIsc belts, various sizes, brands and sizes, 

347
DR Power Equipment Electric Log Splitter
DR Power Equipment Electric Log Splitter model K22.  1/2 HP single phase Farm Duty electric motor.    In working condition.  

500
2016 Bobcat T-630 Skid Steer
2016 Bobcat T-630 tracked skid steer.   It has a Bobcat Engine rated at 74 horse power, 2-speed, auxiliary hydraulics, hand and foot controls, power quick attach, suspension seat, 78'' bucket, 3'450 hours, Deluxe panel, lift capacity of 2'100 lbs, tracks are at about 60%.  It has a fresh tune and service with a new battery and starter.  Product ID number: AJDT13366

500A
2008 Bobcat T-320
2008 Bobcat T-320 with 3'451 hours.  It is powered by a Kubota diesel engine rated at 92 horse power.   It has a 84'' bucket, auxiliary hydraulics, full cab with heat and air conditioning (needs a door), hand controls that are either in H or ISO pattern, a lift capacity of 3'200 lbs, quick attach, code start, operating weight is 9'702 lbs, fuel gauge does not work, hand controls need work. Serial Number A7MP60507

500B
CAT 299C Skid Loader
CAT 299C skid loader with 6'619 hours.   It has a CAT 2236 Turbo charged diesel engine rated at 94 horsepower.  It is a 2-speed and has high flow auxiliary hydraulics, ISO hand controls, full cab with heat and air conditioning, suspension seat, 78" bucket, power attach, a lift capacity of 4'150 lbs, tracks are about 80%, Everything works.   Serial Number CAT0299CJJSP00412

500C
Bobcat T-180 Skid Loader
Bobcat T-180 Skid Loader.  It is powered by a Kubota 4-cylinder turbo charged engine rated at 61 horsepower and has 3'731 hours.   It comes with a 68" bucket, qucik attach, auxiliary hydraulics, hand and foot controls, a lift capacity of 1'800 lbs, machine weight is 7'367 lbs, it does have heat but the glass and door is missing, tracks are under 25%.  Everything works.   Serial Number: A3LL37408

500D
Bobcat T-190 Skid Loader
Bobcat T-190 Skid Loader with 5400 hours that is powered by a Kubota V2003T turbo diesel engine that is rated at 61 horsepower.  It had a complete engine overhaul at 5'317 hours and has a new cylinder head at that time also.  It has a 63'' bucket, auxiliary hydraulics, a 1'900 lb lift capacity, full cab with heat , hand and foot controls, power attach, new drive belt, weighs 7'612 lbs, tracks in good condition.   The left side drive does leak oil.   Serial number: 519311477                                              

500E
CAT 277 Skid Loader
CAT 277 Skid Loader Powered by a turbo diesel engine rated at 94 hp.  It comes with a 80'' bucket and has a lift capacity of 3'200 lbs.  It is joy stick controlled, has a full cab (needs door), new rollers in 2018, auxiliary hydraulics, quick attach, tracks under 25%, hour meter has been changed (see picture). fuel gauge not working, new left side drive motor, last serviced in November of 2020.   Serial Number :  CATbb277jcncb1682

501
John Deere 325 Skid Loader
2006 John Deere 325 Skid Loader.  Powered by a turbo charged diesel engine and has a lift capacity of 2500 lbs. It has additional weights in rear, full cab with heat and air conditioning, quick attach, sells with 72'' bucket, hand and foot controls, 2-speed, auxiliary hydraulics and has 3050 hours.    *** NOTE   Tracks that are on the machine do not sell with but are going to be available seperatly.

502
New Holland LS216 Skid Loader
New Holland LS216 Skid Loader with a 60 horse power turbo charged diesel engine and has 3'425 hours.  It has a lift capacity of 1'600 pounds, hand and foot controls, full cab (needs front door), 60'' bucket, heat, power attach, newer tires, auxiliary hydraulics, suspension seat, new battery.    Product ID Number: JAFOL216CDM477968

502A
Gehl 5640 Turbo Skid Loader
Gehl 5640 Turbo Skid Loader with 8'226 hours.   It is powered by a Duetz diesel engine rated at 82 HP. and has a lift capacity of 2'200 lbs.  It has a full cab (door missing) hand controls, sells with 67'' bucket, steel tracks are included, tires are at about 75%,  everything works, left lift cylinder could use a new seal,   Serial Number GHL05640E00508183

503
ASV MD2800 Track Skid Steer
ASV MD2800 Track Skid Steer with an 70 horse power Isuzu diesel engine. It has lift capacity of 2'100 lbs, 3'072 hours, high flow hydraulics,posi-track, hand controls, new seat, 72'' bucket, quick atatch, serviced 10 hours ago, undercarriage is about 75%, tracks are 18'' wide, everything works and is in good condition,   Serial Number 0073-00WTD

503A
Bobcat 753 Skid Loader
2003 Bobcat 753 skid loader with 5'649 hours.  It has a 2.2 liter Kubota diesel engine that makes 43 horsepower.  It has a lift capacity of 1'300 lbs, comes with a 60'' bucket, has a full cab with heat, auxiliary hydraulics, weighs 4'740 lbs.  The tires are at about 25%, has had the same owner the last 15 years.   Serial Number 515839684

504
Bobcat 853H Skid Loader
Bobcat 853H wheel skid loader with an Isuzu diesel engine rated at 58 horsepower with 4047 hours.  It has a full cab with heat, hand and foot controls, 78'' bucket, auxiliary hydraulics, lift capacity of 1'700 lbs, everything works, tires are at about 20%.   Product ID number 51281166. 

505
Bobcat 553 Skid Loader
Bobcat 553 Skid Loader with 2'790 hours.  It is powered by a Kubota diesel engine and has a lift capacity of about 950lbs, It wil have New Tires by auction time, does not come with attachments, Engine is rated at apporximately 35 hp.  Serial Number 516312071

505A
Hydra Mac 12C Skid Loader
Hydra Mac 12C Skid Loader.  It has a 4-cylinder Chrysler gas engine rated at 20-30 horse power, and has a lift capacity of around 1'300 lbs,  It sells with a 66'' bucket, pallet forks and a bale spear.  The hour meter shows 2'537 hours but it is unknown if that is correct,  It has a new Weber carb this year and it does run and opperate.   Serial Number 33233

506
CAT MT965B Tractor
CAT MT965B Tractor that features a 510 horsepower 18.1 liter 6 cylinder turbo diesel CAT 2236 engine.  The power shift transmission has 16 forward gears and 4 reverse. Max speed of 24 mph, 4 remote control valves, 390 gallon fuel capacity, 60'000 operating weight,  the left rear tire needs to be repaired but does hold air for a few days and batteries will need to be replaced.  Tractor shows 18'821 service hours ,   Serial number AGCC0965JNTTF1107

507
1974 Massey Ferguson 1135
1974 Massey Ferguson 1135 with only 2'690 original hours.  It is powered by a 5.8 liter 6 cylinder turbocharged diesel engine that puts out 134 horse power and is backed by a multi speed power shift transmission.  It has a PTO, drawbar, 3-point hitch and newer paint.  The 3-point does need some valve work but other than that the tractor is in excellent working order.   Serial Number 9B45257

508
New Holland Tractor with Ford Front End Loader
Model 3415 with under 700 hrs! 44 HP, live PTO (38 HP) 2WD, 3-point hitch, sells with bucket, this tractor was well maintained and is in good working condition. 

508A
John Deere 4640 Tractor
1979 John Deere 4640 Tractor with 8'853 hours.   It is powered by a 7.6 liter 6-cylinder turbo charged diesel engine that makes 185 horsepower and is backed by a 8-speed full power shift transmission that has 8 forward and 4 reverse gears.  It has a 3-point hitch, PTO rated at 155 hp, draw bar, full cab with heat.  The 3-point hitch does go up and down but not to full height, that cab does not have a radio and there are signs of heavy wear (see pictures).  The alternator is not working but does if you jump it. Just out of the shop see invoice in pictures.  Serial Number 4640P009952R 

509
Kubota M4500DT Tractor
Kubota M4500DT Tractor with 6' bucket.  It has a 55 horse power 6 cylinder diesel engine with a 8-speed transmission and 2 speed reverse.  It is a 4-wheel drive and has 1928 hours. It also has a draw bar, 3-point hitch, pto, rear hydraulics.  The front loader bucket extends to 10' high and everything works as it should and was last serviced at 1840 hours.   Serial number  103269   Engine model number S2600-A

510
Kubota B2710 Tractor
Kubota B2710 compact utility tractor with 820 hours and in good running condition.  It is powered by a 1.3 liter in line 4 cylinder diesel 27 horsepower engine with a hydrostatic transmission. It has 4 wheel drive, a 52'' loader bucket, power steering, 3 point hitch and a PTO. 

511
Kubota BX1500 Tractor
Kubota BX1500 sub compact utility tractor  powered by a 15 horsepower .6 liter diesel engine with a hydrostatic transmission. It has 4 wheel drive, turf tires, a 48'' loader bucket, mower deck, power steering, 3 point hitch, draw bar and a PTO. 1285 hours.  

512
Tractor King JM-254
Tractor King JM-254 with a 1.5 liter 3-cylinder diesel engine and a 12 speed transmission that has 4 reverse gears and is 4-wheel drive.  It does have a 2 post open ROPS with a roof, 3-point hitch, draw bar, live 540/1000 pto and weighs 2'514 lbs.   Serial Number: 05121000412

512A
John Deere Model A
1946 John Deere Model A with a 5.1 liter 2 cylinder gas engine rated at 26 horse power, 4 speed transmission with reverse, 540 PTO, draw bar.  It does run and drive. 

513
Minneapolis-Moline Tractor
Minneapolis-Moline Tractor   Model 4 1/4 X 5,  Serial number 01914011.   It does run and operate, has row crop front end, 4 cylinder engine, rear draw bar, pto, rear hydraulics,.  

514
Cub Cadet Lawn Tractor with Snow Blower
Cub Cadet Lawn Tractor with Snow blower and cab.  It has a 20 horse power Kohler V-twin engine and hydrostatic transmission. It has a 42'' 2 stage snow blower that is direct drive.  The rear wheels are weighted and does come with tire chains.  It runs well and has 952 hours. 

514A
Cub Cadet Lawn Tractor
Cub Cadet Lawn Tractor, that has 479 hours, 624cc Kohler engine, 48'' deck.  It does run and drive, mower deck does not engage.   

514B
Simplicity Lawn Tractor
Simplicity Lawn Tractor, It has 649 hours, 44" mower deck, hydrostatic transmission, Briggs and Stratton 22 HP 646cc engine, runs and drives

514C
Simplicity Lawn Tractor
Simplicity Lawn Tractor in excellent running condition.  It has 243 hours, 724cc  23 HP Briggs and Stratton engine, 50" mower deck, hydrostatic transmission.  

514D
Simplicity Lawn Tractor
Simplicity Lawn tractor with a 17 hp Kohler engine and hydrostatic transmission.  The mower deck is 48'' wide, snow blower attachment is 42" wide and comes with a leaf vac and cab encloser for use when blowing snow. everything works as it should.  

515
Gehl DL6L-42 Telehandler
Gehl DL6L-42 Telehandler with 5200 hours.  It has a 42' reach, 4-wheel drive, 4-wheel steering, foam filled tires, full tilt, turbo diesel 115 horse power engine, 4-speed transmission, lift capacity of 7'000 lbs and has a new seat.   This machine works and operates as it should.  

516
Gradall Telehandler 534C
Gradall 534C Telehandler It has a lift height of 36' and a reach of 23' and lift capacity of 6'000 lbs, 4-wheel drive, rear wheel steering, hydrostatic drive, hours are unknown, 4 cylinder Cummins diesel engine rated at 76 horsepower , carriage tilt, operating weight with carriage and forks is 17'830 lbs.   Serial number 0288793

516A
Sanderson Telehandler
Sanderson Telehandler model 11-30.  It has a reach of 36' and weight capacity of 6'000 lbs.  It can be switched from 2 or 4-wheel drive and the steering can be front,rear or crab style steering.  It is powered by a Ford 4-cylinder diesel engine and has a 4-speed transmission and shows 5'538 hours. The frame does tilt, has a new hydraulic pump, does have a few minor leaks and the front left wheel has a oil leak also.   The tires are at about 50%.   

517
Dyna SC15 Firewood Processor
2018 DYNA SC15 firewood processor, 34 hp CAT diesel, just under 900 hrs, 14 foot conveyor, this machine has been refurbished by the factory with some 2019 updates. It has a 4 way splitter wedge, it is fully updated and loaded, ready to work. This machine has always been owned by DYNA RENTALS, it was used as a rental unit, maintained to DYNA specs and is ready to generate revenue for you!  

518
Dyna Model SC16 extended frame Firewood Processor
New in 2011, only 2200 hrs. powered by a John Deere diesel, new control panel just over 200 hrs. ago. Good Operating Condition, NICE MACHINE!

519
Case 621B Wheel Loader
Case 621b Wheel Loader.  Hour meter shows 1619 hours but it is believed to have rolled over with actual hours being 11'619.   It is powered by a 6T-590 turbo diesel engine rated at 128 horse power, transmission has 4 forward and 3 reverse gears, 8' bucket with a heaped capacity of 2.23 yards,weight is 27'250 lbs,  full cab has heat, in good working condition.  Product ID Number:  JEE0039905

520
Case W18 Wheel Loader
Case W18 Wheel Loader that does have a bad engine.  It comes with an 8' quick attatch tooth bucket, hours are unknown, some cylinders have been repacked and has air brakes.  

521
Bobcat 430 Mini Excavator
Bobcat 430 Mini Excavator with 2494 hours,  It does have a full cab with heat and air conditioning, It is powered by a 4 cylinder 42 horse power diesel engine.  It has a reach of over 16' a dig depth of 10' a operating weight if just over 8'000 lbs, rubber tracks, a 24'' 5 tooth bucket with thumb, a 70'' blade, runs and operates as it should.  

521A
1996 Samsung SE 210 LC-2 Excavator
1996 Samsung SE 210 LC-2 Excavator with 5'984 hours.  It is powered by a Cummins Diesel engine rated at 136 horsepower model number 6BTA5.9L  It has 32" wide tracks with a good under carriage (see pictures), A 4' wide 5-tooth bucket with stationary thumb, a full cab with heat.  Weighs in at 43'500 lbs.   Everything works except for the fuel gauge.  Serial Number FBY1892

522
John Deere 690C Excavator
John Deere 690C Excavator with 5'234 hours, It does run and operate as it should, undercarriage is at 75%, it can reach 30' across the ground, powered by an inline 6-cylinder turbo charged 6-466T engine rated at 134 horse power, operating weight is 39'935 lbs, tracks measure approximately 9 1/2' outside width,  does not have front window. 

523
Case 580 Super L Backhoe Loader
Case 580 Super L Backhoe Loader with 4'784 hours.  The backhoe has a dig depth of 14'5'', reach from swivel is 18'1'', dig force is 13'126 lbs, reach height is 8'9'' from swivel.  The loader bucket is 82'' wide with a lift capacity of 6'182 lbs and has a clearance of 8'1''.  It is powered by a Case 4T-390 turbo charged diesel engine that puts out 91 horsepower and is backed by a 4 speed transmission with reverse. Operating weight is approximately 13'000 lbs.   Does need some windows.   Product ID Number: JJG0268126

523A
Mitsubishi LD350 Crawler Dumper
Mitsubishi LD350 Crawler Dumper, In running condition, needs some break work, hours are unknown, undercarriage is in good condition,

524
Timberjack 360 Grapple Skidder
Timberjack 360 Grapple Skidder in excellent working condition.  Powered by an inline 6 cylinder diesel engine,  Currently showing 10'738 hours and had a rebuild about 300 hours ago. The cab has heat, stereo, cb radio, newer tires,   Everything works as it should.  Serial number 10EB1161

525
John Deere 440B Skidder
JD 440B Skidder, meter reads 5280 hrs. good strong winch & cable w- 3 chokers. Power shift, NEW TIRES in rear, front tires @ 50% (front tires do have a little dry rot) runs and operates very good. Appears to have a strong transmission. Rebuild motor approx.. 500 hrs. ago. A little oil underneath but no major leaks. Overall good condition. Woods ready.  

526
Clark Forklift
Clark Forklift model C40B.  It has a 2 stage mast, 4'000 lb lift capacity, 42'' forks, new battery and is LP powered.  It does run but does have a crack in the head and will need new tires.   Serial Number 1809-893-868

526A
Crown Electric Lift
Crown Electric Lift with 504 hours.   It has a lift capacity of 2'000 lbs and weighs 1'410 lbs. It has 4 batteries and holds a charge well.   Model 20MT  Serial number 1A115776

527
Case 310F bull dozer
1964 Case 310F bull dozer, It has a 4 cylinder gas engine, 7'4'' mechanical 4-way blade with hydraulic lift, PTO, 14'' wide tracks, under carriage has good sprockets and pins.   Serial number 3021457  sells with manuals. 

527A
Caterpillar D-4 Dozer
Caterpillar D-4 Dozer with 78'' 4-way blade.  It has a 4 cylinder CAT diesel engine and it is in good working condition. The pony motor is not currently working, hour meter shows 4'950 hours, has newer battery, undercarriage is at or above 75%.  Serial Number 6U4423

528
Genie Z-60/34 Boom Lift
2000 Genie Z-60/34 articulating boom lift.   It has 3'788 hours as of 12-1-20.  It is powered by a 75 horse power Ford 4 cylinder engine that runs on gasoline or LP, features dual controls, 4-wheel drive, air filled tires,  66' working height, 36' reach, 500lb lifting capacity, 27' up and over clearance, 6' jib, 12 volt auxiliary power, 22'000 unladen weight,  It does have a small oil leak.   Serial number 2204.  

529
2002 Genie S-60 Boom Lift
2002 Genie S-60 boom  lift with 8'705 hours. It has a maximum lift height of 60', a horizontal reach of 50', platform weight rating of 500lbs, the platform rotates 160 degrees, unladen weight is 26'700 lbs, It has good tires, it is 4-wheel drive, It has a Perkins diesel engine and has been well maintained.  Serial Number: S60-8239

530
2000 Genie S-60 Boom Lift
2000 Genie S-60 boom lift with 9'745 hours. It has a maximum lift height of 60', a horizontal reach of 50', platform weight rating of 500lbs, the platform rotates 160 degrees, unladen weight is 26'060 lbs, It has good tires, it is 4-wheel drive, It has a Duetz diesel engine and has been well maintained. Serial Number: S60-6020

530A
MEC Scissor Lift
MEC Scissor lift that is 46" wide and is 12' long while extended.   It has a lift capacity of 1'000 lbs with 300 lb maximum on extension.   It lifts 19' to the top of the cage, has fork pockets and the battery charger is new.  The batteries do need to be replaced. 

531
K-TEC 3100 Scraper Pan
K-TEC 3100 Scraper Pan that has been recently repainted and has new front hydraulic hoses and is in good working condition. Tires are at 20%.  Heaped Capacity (ISO Rated): 28 Cubic Yards Struck Capacity: 18.5 Cubic Yards Max Loading Rating: 68,000 lbs Bucket Dimensions: 12'W x 4'H x 10'6"L Cutting Width: 12' Cutting Edge: 3-Piece Blade Gate Opening: 78" Rack Height (Tiltable): 3' Gate Cylinders: 4.5" x 28" Lift Cylinders: 5.5" x 31" Ejector Cylinder: 5" x 76"

531A
Barreto Stump Grinder
30sg, ser# sg0887, Track Machine, 26.5 hp Kohler Engine, Hydraulic direct drive, 19.25 " cutting wheel, only 428 hrs, 1700 lbs frame, Joy stick controlled head, Fits through a 36" gate, 14" cutting depth, , very good condition!

532
Ditch Witch 5110
Ditch Witch 5110DD with a Duetz diesel engine and a 4 speed manual transmission and has 1'656 hours. It has a 5' arm, approximately 20 hours on new chain, 18'' 4 tooth bucket, 6' blade, 3' plow, auger, outriggers, 4-wheel drive.  It is in good running condition, will need wheel bearings.  Serial number 5K0019

532A
Ray-Go Compactor Roller
Ray-Go Compactor Roller made by Rustler,  It has a 7' wide roller, powered by a Detroit Diesel engine,  It ran when parked 7 years ago and appears to be complete.  hours are unknown,  Serial number: 09B0239

532B
Vermeer Trencher
Vermeer V-3550A Trencher with a Duetz diesel engine and hydrostatic transmission and has 2'735 hours.  It comes with a 4-way 4 1/2' back fill blade, 5' trenching arm that cuts about 3' deep, chain is 3 yrs old, good auger, 4-wheel drive,  It has a few small leaks but runs and operates as it should,  joy stick needs a fitting, Serial Number : 1VRSO72P6V1000114

533
2000 Mack Dump Truck
2000 Mack RD688S dump truck,  It has a E7-350EUP engine backed by a 10-speed Eaton Fuller transmission and is rated at 350 horsepower. It has 501'310 miles and 17'107 hours.  It has a 13' dump bed, aluminum front wheels, decent tires, hitch, new batteries.  It will need rear suspension bushings in the near future.  VIN: 1M2P267Y1YM050896

534
1979 International Dump Truck
1979 International Dump Truck model 2554, Runs and drives, DT466 engine with 4'000 miles on rebuild, 8-speed manual transmission, bed works as it should, new batteries this year, builds and holds air, 304'000 miles on truck, rear tires are cracked,   VIN: CA255JHA28032

535
1997 Chevy S-10 Low Miles
1997 Chevy S-10 pick up truck with only 59'150 miles, It is a standard cab with 2-wheel drive and is powered by a Vortec V-6 engine and backed by an automatic transmission.  It has a 6' bed with a tonneau cover, manual windows and locks.  This truck is very clean inside and out and is rust free.  VIN 1GCCS14X0VK179835

536
2008 GMC C4500 Service Truck 4x4
2008 GMC C4500 Service truck with 4-wheel drive with 218'334 miles.  It is powered by a 6.6 liter Duramax diesel engine and backed by an Allison transmission. It has Reading service body that is set up for an on board welder or air compressor. Truck is in good working condition. VIN: 1GDE4C3978F410353

537
Volvo A25 Water Truck
Volvo A25 Water Truck machine type 5350 with 34'904 miles, 4685 hours and a 4'000 gallon water tank.  Works as it should.   Manufacter number 04749. 

537A
2000 Volvo Boom Truck
2000 Volvo Boom Truck with only 68'246 miles and 4'575 hours of total engine time.   It is powered by a Cummins diesel engine and backed by a 8-speed Eaton Fuller Transmission. It has Hiab Crane mounted that can be side controlled or by remote control.  The remote also has an additional battery and charger in the cab.  It also has outriggers, currently fitted with a drywall cradle, tag axle, air brakes, Good running truck that starts right up.  Tires are 25-75%.   GVWR 77'020 lbs.  VIN: 4V5JC2UF9YN870155

537B
1999 International 4900 Boom Truck
1999 International Boom Truck.   It has a Eaton Fuller 8-speed transmission and a HIAB 235K crane that goes 39' and comes with a drywall cradle.  It currently has 218'782 miles and was DOT inspected on December 11th of this year and has new steer and drive tires.   This truck made its last delivery on December 30th and everything on the truck is in working order except for the air conditioner.   VIN: 1HTSHADR3XH610814  

538
2000 Ford E-350 15 Passenger Van
2000 Ford E-350 15 Passenger Van.  It has a 5.4 liter Triton V-8 engine with an automatic transmission, 158'148 miles,  1-ton chassis and suspension, ducted heat and air conditioning, aftermarket stereo.  The brake light is on but they operate as they should, check engine light on, uses 1 quart of oil every 1'000 miles or so, transmission seal leaks.   VIN: 1FBSS31L3YH830479

539
2005 International 4200 Box Truck
2005 International Box Truck with 163'181 miles, It has a VT365 engine and an Eaton Fuller 6-speed manual transmission, Box is 24' long and total height is 13'1'', swinging rear doors, aluminum ramp, box is dry inside, air brakes, GVWR 25'500 lbs, VIN: 1HTMPAFL35H131648  *** NOTE***   The truck was in running condition when it was parked, now the starter spins and it is assumed it needs rebuilt or replaced, was towed to auction facility, the drive shaft was removed and air brakes are caged for transport.

540
2001 Freightliner FL70 Flatbed
2001 Freightliner FL70 Flatbed with a CAT 3126 Diesel engine and a 6-speed manual transmission, 273'621 miles, air brakes, GVWR 33'000 lbs, dump bed is 18' long, tires are about 30%  VIN: 1FVABTAK91HH86018

541
2007 International 8600 Semi Tractor
2001 International 8600 Semi Tractor with 393'774 miles, It has a Cummins engine with an Eaton Fuller 10-speed transmission, air brakes, single rear axle, day cab, dual fuel tanks, good 5th wheel plate and air hoses, catwalk, tires at about 30% and is in good running condition.  VIN: 1HSHWAHN07J432221

542
2001 Freightliner FL70 Flatbed
2001 Freightliner FL70 Flatbed with a CAT 3126 Diesel engine and a 6-speed manual transmission, 280'023 miles, air brakes, GVWR 33'000 lbs, dump bed is 18' long, tires are about 30% VIN: 1FVABTAK71HH86020

543
2001 Ford F-250 XL Super Duty 4X4
001 Ford F-250 XL Super Duty 4X4 with a 7.3 liter Powerstroke V-8 engine and automatic transmission showing 344,228 miles.  It is a standard cab with an 8' bed, floor mounted shifter for 4-wheel drive,  bed has a headache rack, trailer brakes, hitch, does have low compression on one cylinder,  VIN: 1FTNF21F91ED00627

544
2005 Chevy Silverado
2005 Chevy Silverado with 174'039 miles.  It is powered by a 4.8 liter V-8 engine with an automatic transmission and is 2-wheel drive.  It has a standard cab that can seat 3 with a 8' bed that has a been lined.  It comes with power windows, locks and mirrors, tow hitch and trailer lights.  The check engine light is on and the brakes are soft, tires are at about 30%. One owner vehicle with minimal rust for its age.   VIN: 1GCEC14V05Z307034

545
1997 GMC C6500 Flatbed
1997 GMC C6500 powered by a CAT 3116 diesel engine and backed by an automatic transmission.  The bed is 8' X 18x and will need new decking. It has 1 tool box, 1 fuel tank, the interior is clean,  it runs with 103k miles, GVWR 25'300, needs brake work, sells with title.  VIN: 1GDJ7H1J6VJ519444

546
1994 Ford F-150
1994 Ford F-150 with a 4.9 liter straight 6 cylinder engine and an automatic transmission. It has an 8' bed with a cap, set up for trailer brakes.  It does need brake work and sells with a title.   VIN: 1FTEF14Y8RLA76295

547
2003 GMC W3500
2003 GMC W3500 powered by a Isuzu diesel engine and backed by an automatic transmission with 100'500 miles, It is a cab over and has a 8' X 18' bed with stake sides that are removable. It runs and has good tires, It needs brakes and the windshield is cracked. It does sell with a title. VIN: J8DB4B14037006434

548
2006 Sterling AT9500 Semi
2006 Sterling AT9500 Semi with a day cab with a Mercedeez Benz engine with a Eaton Fuller 8-speed transmission and shows 605k miles and 22k hours.  It has good tires, two 100 gallon tanks, good 5th wheel plate and hoses, wet kit. It is not in running condition and does sell with a title. VIN: 2FWJA3CV76AV32742

549
2004 Dodge Ram 1500
2004 Dodge Ram 1500 with a Magnum 3.7 liter V-6 engine and an automatic transmission,171'959 miles, It has a standard cab, short bed, hitch, 2-wheel drive, some rust, tires are at about 50%, It does run but dies at idle, VIN: 1D7HA16K44J124826

549A
2000 Dodge Ram 3500
2000 Dodge Ram 3500 with 275'007 miles.  It has a Cummins diesel engine and an automatic transmission and is 2-wheel drive. The transmission was just replace with a rebuilt transmission with only 100k miles on it.  It has and extended cab, dual rear tires, contractors utility body, tow package with trailer brakes, tires in good condition,   truck runs and drives but does need brakes, Service records included.    VIN: 1B7MC3367YJ184482

549B
1993 Chevy Plow Truck K3500
1993 Chevy Plow Truck  K3500 4X4.  It has V-8  gas engine with an automatic transmission and floor mounted shift for 4-Wheel drive.  It currently has 162'087 miles.  It does have a motor knock that is undiagnosed.  It comes with a Western 8' snow plow.  It is a standard cab with an 8' bed and has trailer brakes.   VIN:  1GCHK34K5PE198906

549c
2001 Jeep Grand Charokee
2001 Jeep Grand Charokee with 246'822 miles.  It has a 4.0 liter straight 6 cylinder engine with an automatic transmission.  It does have 4-Wheel drive but the drive shaft is missing.  It has a heated leather interior, power windows, locks, mirrors and seats.  It is a 4 door that seats 5 and has good heat.  The tires are in near new condition.   VIN: 1J4GW58S71C703623

549D
2000 Ford F-250 XL Super Duty 4X4
2000 Ford F-250 XL Super Duty 4X4 with 260'899 miles.  It is powered by a 7.3 liter Power Stroke V-8 diesel engine and has an automatic transmission and has 4-wheel drive.   It is a crew cab, has a cap, 8' bed, goose neck hitch, extra set of wheels and tires inside bed, has manual windows and locks, only one battery currently,    Runs and drives.    VIN: 3FTNW21F4YMA28461

549E
2003 Chevy Silverado 2500
2003 Chevy Silverado 2500 work truck.   It has a 6.0 liter gas V-8 engine with and automatic transmission and is 2-wheel drive with 273'209 miles.  It is a standard cab with an 8' bed and has a towing package, trailer brake controller, tool box, manual windows and locks  Runs and Drives body is in good condition for age.   VIN: 1GCGC24UX3Z131855

550
Polaris Snowmobile
1981 Polaris TXL 340 snowmobile Serial Number 0801627.  It has a 2 cylinder, stroke 340cc engine.  It does start and run and could use some TLC.  Sells with Bill of Sale.  

550A
2005 Honda Rincon 650
2005 Honda Rincon 650 four wheeler, Model TRX650FA.  It has a 650cc engine, automatic transmission that can also be shifted electronically, can be switched from 2WD to 4WD, has a 2'000 lb superwinch, hitch, independent rear suspension, It  has 5'532 miles.  This machine does not run as it has sat for approximately 3 years.  Sells with Bill of Sale only 

551
Equipment Trailer
Nation Equipment Trailer,  It is an 8' wide X 20" long with a 5' dovetail and ramps that is rated at 14'000 lbs.  It is a deckover and the deck is in good condition.  It has a heavy duty jack, adjustable tongue, trailer brakes that work well, side storage box and chain box, pulls with 2 5/16'' ball, it was built new in 09/2018.   VIN: 4A9F32529K1048149

552
2009 XL Specialized Equipment Trailer
2009 XL Specialized Trail King equipment trailer that is 102'' wide X 48' long with aluminum pull outs.  It is Mechanical detatch good, tires and brakes, The Glad hands appear to be broken off. 

553
TBT-20 Equipment Trailer
1996 TBT-20 Equipment Trailer. The deck measures 8 1/2' wide and 20' long with 5' dovetail and ramps and has a 20 ton capacity. It will need new decking and it does sell with a title. 

553A
Equipment Trailer
2018 Mastiff tandem axle equipment trailer that was bought new in 2019 and has had very little use. It is 7' wide X 22' long and has built in ramps, axles are rated at 7'000 lbs each with a GVWR of 14'000 lbs. and sits in 16" wheels. Comes with LED lights, trailer brakes, treated floor, heavy duty jack pulls with 2 5/16'' ball. This is in almost new condition and does come with a clear title. VIN: 1M91D262XJG929745

554
FRP Enclosed Cargo Trailer
7' X 12' Enclosed Cargo Trailer. It has a ramp rear door, curb side man door, an aluminum tool rack mounted to the front, aluminum shelving inside, pulls with 2'' ball.  No VIN, Sells with Bill of Sale Only. 

555
2020 Cargo Express Enclosed Trailer
2020 Cargo Express Enclosed Trailer, It is a 6'X12' with a v-nose with a ramp rear door curb side door. It has all LED lights, shelving inside can be removed, pulls with standard 2'' ball, single axle, has dent in diamond plate from bumper, sells with title and is in great condition only used a handful of times.   VIN: 53BCTEA13LA058242

555A
2012 Bay Bridge 8 x 20 Enclosed Trailer
2012 Bay Bridge 8 X 20 Enclosed Trailer.  It has tandem 6-lug axles, swinging rear doors, curb side man door, wired for electricity, has shelves, workbench, microwave, and 12 volt work lights in the rear.  It pulls with 2 5/16'' ball, brakes and tail lights are in working order.   Sells with Title.  VIN: 1B9BE2426CB944015

555B
2017 8' X 16' Discovery Enclosed Trailer
2017  8' X 16' Discovery Enclosed Trailer that is a one owner and custom built with tandem heavy duty 7'500 lb axles.  It has swinging rear doors, curb side man door, ladder to top, ladder rack, inside shelving, brakes, LED lights, pulls with 2 5/16'' ball.   Sells with Title.  VIN: 1D9T11623H1713146

555C
1997 Cargo Express Enclosed Trailer 8 X 16
1997 Cargo Express Enclosed Trailer  8' X 16'   Tandem axle, Swinging rear doors, curb side man door, pulls with 2 5/16'' ball, has shelving in the front, needs new tires,   VIN: 48B500G22V2012701

556
Spartan Car Hauler
Spartan Trailer MFG Car Hauler, It is 7' wide X 21' long, tandem axle with 6 lug wheels, drive on dovetail, diamond plate, removeable fenders, brakes, 5'000 lb winch included, sells with title.  VIN: 4S91CF20DA397232

557
Tilt Deck Trailer
Tandem Axle tilt deck trailer with a 10'000 lb weight rating.  It has 6 lug axles, brakes, heavy duty jack, matching spare tire, stored inside.  Measures, 78'' wide between the rails and is 20' long plus beaver tail.  Sells with Title.   VIN: 1T9FS2022X0372087

558
Rustgo Scaffold Wagon
Rustgo Scaffold wagon work platform, in usable condition with newer tires.  

558A
Utility Trailer
5' X 8' Utility Trailer with 3' ramp gate, in good condition, does have lights, pulls with 1 7/8'' ball, in good condition, sells with bill of sale only. 

558B
5' X 8' Utility Trailer
5' X 8' Utility Trailer,  It has a tilt deck, lights, jack, pulls with 2" ball and sells with Title 

559
Rustgo Scaffold Wagon
Rustgo Scaffold wagon work platform, in usable condition with newer tires.

560
Car Trailer
Home built Car Trailer with Title. It measures 70'' wide between the wheels and is 14' 6'' long and the wheel rails are 17'' wide.  It is a tandem axle with 5 lug wheels, does have trailer brakes, torsion flex suspension, includes a 3'500 lb 12 volt super winch, lights work and pulls with a 2 5/16'' ball.   

561
Home Built Trailer
Home built trailer with a deck size of 56'' wide and 106'' long. It is a single axle with 10'' wheels. It does have lights and a tongue jack, ,pulls with a 2'' ball.  Sells with Bill of Sale only. 

562
Office Trailer
8' X 16' office trailer on single axle, It is wired for electricity and has an air conditioner unit and base board heat, both are in unknown operating condition. pulls with 2 5/16'' ball, will need trailer lights. Sells with bill of sale only.  

563
1999 BMR Dump Trailer
1999 BMR tandem axle dump trailer.  It is 6 1/2' wide and 14' long and pulls with pintle style hitch.  The dump bed, roll top and brakes all work, It does have a rusty floor the rear door latch is broken and the lights need work and the tires are at 25%.   One owner since new.  Sells with title.  VIN: 43YDC1420XC003982

564
1998 BIA Dump Trailer
1998 BIA Dump Trailer.  It is 6' wide X 12' Long, Tandem Axle, It has a pintle style hook up, the dump, roll top and brakes work.  The rear latch needs repair, the floor and fender is rusted and it needs tires.   VIN:  43YDC1221WC001630  Sells with Title

564A
Tarco Leaf Vac
Tarco Leaf Vac with 3'816 hours.  It is powered by a John Deere diesel engine and was built in 11/1998.  It does have a power jack, pintle style hitch and is in good working condition.  

565
Forage Wagon
Myers Equipment Forage wagon.  The bed is 8' wide X 14' long, has an open top, 540 PTO driven, the bed and augers are in good condition.    Serial Number 884028

566
J & M Gravity Wagon
J & M Gravity Wagon,   350 bushel capacity, in good condition, one owner since new, always stored inside, could use new tires.   Serial Number 263181

567
J & M Gravity Wagon
J & M Gravity Wagon, 350 bushel capacity, in good condition, one owner since new, always stored inside, could use new tires. Serial Number 25950

568
J & M Gravity Wagon
J & M Gravity Wagon, 350 bushel capacity, in good condition, one owner since new, always stored inside, new paint,  could use new tires. Serial Number 20165

569
J & M Gravity Wagon
J & M Gravity Wagon, 350 bushel capacity, in good condition, one owner since new, always stored inside, new paint, could use new tires. Serial Number 20164

700
Skid Loader Bucket
John Deere U66 skid loader bucket with edge, 66'' wide. 

701
Skid Loader Bucket
John Deere C76 skid loader bucket,  76'' wide.

702
Skid Loader Bucket
John Deere C76 skid loader bucket, 76'' wide.

703
Quick Attach Bucket
66'' 8-tooth quick attach bucket.  

704
Skid Steer Rock Bucket 84''
Skid Steer Rock Bucket   84''

705
Skid Steer Rock Bucket 80''
Skid Steer Rock Bucket   80''

706
Skid Steer Rock Bucket 75''
Skid Steer Rock Bucket   75''

707
Skid Steer Rock Bucket 66''
Skid Steer Rock Bucket   66''

708
New Skid Loader Forks
Brand new walk through forks for skid loader.  Forks are 42'' long

709
New Skid Loader Forks
Brand new forks for skid loader. Forks are 42'' long

710
New Skid Loader Forks
Brand new forks for skid loader. Forks are 42'' long

711
New Skid Loader Forks
Brand new forks for skid loader. Forks are 42'' long

711A
New Bobcat Skid Loader Walk Threw Pallet Forks

711B
New Bobcat Skid Loader Walk Threw Pallet Forks

711C
New Bobcat Skid Loader Walk Threw Pallet Forks

712
Pallet Forks
Bobcat Pallet Forks, quick attach ready, Forks are 42'' long and have adjustable width, one with hole for trailer ball or pin to move trailers and equipment.  

713
Case Skid Loader Snow Blower
Case Skid Loader Snow Blower.  It is a 2 stage and is 6' wide and 2' high, augers are driven by hydraulics and the chute is 12 volt. It has a good cutting edge and is in good condition. 

714
New Skid Loader Push Pull Snow Plow
New skid loader push pull snow pusher. It is 8' wide and has cutting edge on bottom for pushing and on top for pulling when rotated. 

715
New Skid Loader Push Pull Snow Plow
New skid loader push pull snow pusher. It is 8' wide and has cutting edge on bottom for pushing and on top for pulling when rotated.

716
New Fork Lift Push Pull Snow Plow
New fork lift push pull snow pusher. It is 8' wide and has cutting edge on bottom for pushing and on top for pulling when rotated.

716A
John Deere Skid Steer Snow Blade
John Deer Skid steer snow blade.   9' wide, 4-way blade,   1 cylinder needs repair or replaced.  

717
New 12' Ideal Snow Pusher
New 12' Ideal Snow Pusher for bucket mount on back hoe or wheel loader.  

718
Ideal Snow Pusher
14' Ideal Snow Pusher, quick attach for bucket mount, only 2 yrs old with little use in good condition.  

720
Henke Snow Plow For Wheel Loader 24'
24' Henke snow plow for wheel loader.  It has a 12' main blade and 6' wings on each side.  It is a 6 way blade and wings move independently from each other.  It mounts to a JRB coupler and works as it should.   

720A
12' Snow Pusher
12' Snow pusher for bucket mount, has reversable rubber flap, only used 1 season.  

720B
Western Contractor Grade V Style Snowplow
 in like new condition, the owner stated that it was only used a couple time

721
Skid Steer Snow Plow
8' skid steer snow plow, 6-way straight blade, with very little use in almost new condition.  

722
Blizzard Snow Plow
Blizzard Speed Wing Snow Plow in good condition model 8600SW Sells with controls

723
Western V-Blade Snow Plow
Western V-Blade Snow plow in usable condition, 8' wide. 

724
Fisher Snow Plow
Fisher Minute Mount 2 snow plow, It is 8' wide plus wings, good cutting edge, good working condition, Serial Number 35557

725
Grader Box
Grader box set up for skid loader in good condition and is 6' wide. 

801

726
New Skid Steer Rock & Brush Grapple 84''
New Skid Steer Rock & Brush Grapple  84''

727
New Skid Steer Rock & Brush Grapple 80''
New Skid Steer Rock & Brush Grapple  80''

728
New Skid Steer Rock & Brush Grapple 75''

729
New Skid Steer Rock & Brush Grapple 66''
New Skid Steer Rock & Brush Grapple  66''

730
Skid Steer Root Grapple 70"
Skid Steer Root Grapple 70''

731
Skid Steer Root Grapple 80''
Skid Steer Root Grapple  80''

732
Skid Steer Tine Grapple Bucket

733
Skid Steer Rough Brush Mower
Spartan Equipment rough brush mower for skid steer, 52'' wide cut, articulating, in very good condition. 

734
Stump Grinder for Skid Steer
Stump Grinder attachment for skid steer, It has good teeth and is in good working condition, 

735
Home Built Log Splitter
Home built log splitter, hydraulic operated, will hold a 30'' log, It is 11 1/2' long total.  It was last used hooked up to a front end loader for power.  

736
New Skid Steer Tree & Post Puller

737
Wood Tick Log Grapple
Wood Tick Log Grapple, 72'' wide, last used on an excavator,  operating condition is unknown,  

738
NH 4200 Knuckle boom
NH 4200 knuckle boom ready for trailer mount, 996 KG (approximately 2200lb) capacity, It comes with hydraulic controls, outriggers and a continuous rotation grapple.  This machine was bout new and never used.  

739
Skid Steer Receiver Hitch Trailer Mover

740
Skid Steer Receiver Hitch Trailer Mover

741
Weldable Quick Attach Plate

742
Weldable Quick Attach Plate

743
Weldable Quick Attach Plate

744
Weldable Quick Attach Plate

745
Pallet Fork Extensions

746
Pallet Fork Extensions

747
Pallet Fork Extensions

748
Pallet Fork Extensions

749
3-Point KingKutter Brush Hog
60” works good

750
John Deere Tiller
John Deere Tiller, 8-tines in almost new condition, 3-point lift and 540 PTO driven. 

751
Woods Tiller
Woods Tiller model GHT60,  it has good tines, it is 540 PTO driven, and 3-point lift.  good condition

752
Land Pride Tiller
Land Pride Tiller model RGR1258.   It is 3 point mounted, gear driven, reverse rotation, 7'' working depth, 58'' working width, 7 flange rotor, Serial Number  1526516    Excellent condition. 

753
Kubota Mower Deck
Kubota Mower Deck model RCK60-27B.  Mid mount belly mower with 60'' cut in good working condition, fits several Kubota compact tractors.  

855

754
Bale Spear for 3-Point Hitch
.

856

755
3 Point Grader Blade
Adjustable, 84"

756
Bale Spear To Mount On the Front Of A Bucket
.

757
Quick Attach Plate For Excavator
Quick attach plate for excavator mount.

758
Fisher Salt Spreader
Fisher Salt Spreader for pick up truck, in good condition, 

759
Skid Steer Tracks
Loegering Trail Blazers tracks to fit over tires for wheeled skid loaders for better traction.  

760
Loegering Skid Loader Tracks
Loegering Tire Crawler skid loader  tracks that mount over tires.  in decent condition,  Known to fit a Bobcat 763 and will fit other machines.   15'' wide.  

761
Loegering Skid Loader Tracks
Loegering Trail Blazer skid loader tracks that mount over tires. in decent condition, Known to fit a Bobcat 763 and will fit other machines. 15'' wide.

761A
Skid Loader Tracks
Over the tire tracks for skid loader New Holland Brand.   Last used on a John Deere 325 but will fit other machines as well. 

762
Skid Loader Wheels
Set of 4 skid loader wheels and smooth tires.  Wheels are 8-lug and and holes are 8'' apart center to center, rims are 20'' and tires are 28''

763
Bobcat Wheels and Tires
Bobcat Wheels and Tires, Set of 4, 8-lug, measures 8'' from center to center, 6'' center hole. heavy wall, size 10-16.5, good tread. 

764
Telehandler Wheels and Tires
Set of 4 Telehandler wheels with mounted tires, Firestone Duraforce MH, size 370/75-28, foam filled and 14 ply rated.  known to fit JLG943 and Skytrack 8040 and may fit other machines as well.  

765
Utility Body
Monroe Customs utility body for work truck, It has 3 boxes on each side, in good solid condition.  Serial number 16-22678

766
Utility Flatbed for Truck
Utility Flatbed for work truck, Good solid bed, diamond plate floor, with lights and hitch, 

766A
Century Truck Cap
Century Truck Cap last known to fit a 2002 Chevy Silverado 2500HD that was a 4-door with a short bed.   May fit other trucks as well, has one broken window.  

767
Reversible 3-Point Rake
Reversible County Line  3-Point Rake, 72'' wide in good condition.  

768
County Line 3-Point Drag Box
County Line 3-point Drag Box that is in almost new condition.  It is 60" wide and has 5 ripper shanks.  

769
County Line 3-Point Ripper
County Line 3-Point Ripper that is quick hitch compatible.  Good condition.  

770
Bobcat Tree Spade Attachment
Bobcat Tree Spade Attachment,  36" cone style, should be a direct fit to any Bobcat Skid Loader G series and newer and may fit other models also.   It is electric over hydraulic and is in working condition.  It does need some welds repaired.   

771
3-Point Ford Flail Mower
Ford Flail Mower model 719.   It is a 6' wide 3-point attachment and is driven by a 540 PTO.  It is in working condition.  Serial number: 5228

772
3-Point Log Splitter
3-Point Log splitter that is PTO driven.  It is in working condition and will split logs up to 27" long.   

773
Driveway Finisher Grader
Driveway Finisher Grader for skid loader mount that is brand new from the factory.   It has mounts on both sides, one side is for grading and the other side for finishing.  It is 6' wide X 6' long and made from hardened steel.  The cutting edges are adjustable height and are reversible.

774
10' QT Pusher

775
10' QT Pusher

776
10' QT Pusher

777
10' QT Pusher

778
8' QT Pusher

778A
8' QT Pusher

778B
8' QT Pusher

779
8' QT Pusher

780
8' QT Pusher

781
8' QT Pusher

782
84" QT Skeleton Bucket

783
84" QT Skeleton Bucket

783A
84" QT Skeleton Bucket (no sides)

783B
84" QT Skeleton Bucket (no sides)

784
70" QT Root Rake

785
70" QT Root Rake

786
84" Light Duty Fork Extensions

787
84" Light Duty Fork Extensions

788
84" Light Duty Fork Extensions

789
84" Light Duty Fork Extensions

790
Quick Attach Skid Loader Fork Mount
Quick Attach Skid Loader Fork Mount,   Lot 791 forks do not fit.   

791
48" Forks
Set of 48'' Forks 

793
Skid Steer Attach Frame

794
Skid Steer Attach Frame

795
Skid Steer Attach Frame

796
Skid Steer Attach Frame

797
Skid Steer Attach Frame

798
Skid Steer Attach Frame

799
Skid Steer Attach Frame

800
Skid Steer Attach Frame

802
Skid Steer Plate with Guard 5/16"

803
Skid Steer Plate with Guard 5/16"

804
Skid Steer Plate with Guard 5/16"

805
Skid Steer Plate with Guard 5/16"

806
3-Point Work Platform

807
3-Point Work Platform

808
3-Point Adjustable Blade

809
Tiller For Garden Tractor

810
Pallet of Misc 3-Point Parts

811
John Deere Rotary Harrow
John Deere Rotary Harrow, 3-point lift, 14' wide.   Serial number 000591  Type E0414

812
Backhoe Bucket
Backhoe Bucket,  22'' wide, 5-tooth, Rufurbished and painted, fitment is unknown, 

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Equipment Showcase Auction

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
11751 CR 12
Middlebury, IN 46540
Sale Dates and Times
Thursday Dec 31, 2020 Completed
Sale Terms and Conditions
: Cash, check, or major credit card(with 2% con. fee). 10% buyers premium applies to onsite bidders. 13% buyers premium online , 7% sales tax will be in effect , buyers are welcome to fill out a valid exemption. All items are sold without reserve. 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Details
.Equipment Showcase Auction
Skidloaders ~ Excavating~ Construction Equipment
At Absolute Auction!



Consign now
for FREE
advertising!
Consignments are
wanted including:
• Contractor’s Equipment
• Excavating Equipment
• Trailers
• Skidloaders
• Power Tools

John Deere
4640 Tractor
1994 Ford
F-150
Gehl DL6L-42 Telehandler Equipment Trailer
1997 GM

00
Information Lot
Onsite auction is set to start at 9 Am with Power tools with the online portion starting at 9:30. All items are pick-up only and are located at 11751 CR 12 Middlebury IN 46540. Loadout will be available on day of auction until dark, Jan. 1st & 2nd from 8 AM to 2 PM. The following week Monday to Friday 8 AM to 4 PM. After that it is by appointment only by calling Bronson at 574-210-3721 All items must be picked up within 30 days. 

199
Diecast Kenworth Semi and Knuckleboom Log Trailer
Diecast Kenworth Semi and Knuckleboom Log Trailer with logs.  

1
test

200
Honda Water Pump
Honda Water pump model 6X25 with a 4-stroke engine. It is in good running condition with new hose in box.  

201
Honda Powered Water Pump Low Hours!
Honda WB30XT water pump with a Honda GX160. It has less than 5 hours of total tunning time,  In excellent running condition.  

202
Honda Powered Water Pump Low Hours!
Honda WB20X water pump with a Honda GX20X engine, Under 2 hours of total running time.  In Excellent working condition.  

203
Honda Trash pump
Honda WB15 trash pump with a 2.2 horsepower motor in running condition. 

204
Honda Trash pump
Honda WT30X Trash Pump powered by a GX240 242cc  4-stroke gas engine, in good running condition with 3'' suction hose. 

8
Storage Trailer

205
Sand Blaster
Sand Blaster on cart with hood in good working condition. 

206
Dewalt Ready Heater
Dewalt DXH215HD ready heater, 215'000 BTU, 14 gallon fuel capacity, can run on either kerosene or diesel. It has very little use and is in almost new condition.

207
Dewalt Ready Heater
Dewalt DXH190HD ready heater,  190'000 BTU, 14 gallon fuel capacity, can run on either kerosene or diesel. It has very little use and is in almost new condition.  

208
Charge Air Pro Air Compressor
Charge Air Pro air compressor by Ingersoll-Rand.  It has a 5 horsepower 3-phase 230 volt electric motor, 80 gallon tank, 2 clyinder.  In good working condition.

209
Quincy QT-5 Air Compressor
Quincy QT-5 air compressor with approximately a 100 gallon tank and has a 3 phase 5 horse power Baldor motor, upright twin cylinder, just serviced.  Serial number 5058989

210
Ingersoll Rand Air Compressor
Ingersoll Rand air compressor with a 3 phase 10 horsepower motor. It is a twin cylinder and has a 120 gallon tank, 230 volt and can be wired for 480,  just serviced,   Serial number  0809150058

211
Dewalt Air Compressor Low Hours
Dewalt  Airt Compressor powered by a Honda GX160 gas engine, dual tanks, 8 gallon capacity, just serviced and runs good, very low hours, 

212
Craftsman Radial Arm Saw
Craftsman 10'' Radial Arm Saw in almost new condition only used a handful of times.  

213
Rigid Pipe Bender/Threader
Manual Rigid pipe bender and threader with dies,  Model 450

214
Panel Saw
Panel Saw with Rockwell saw, extra blades included, in good working condition.  

215
Echo TC-2100 Cultivator
Echo TC-2100 Cultivator powered by a 2-stroke engine, it has a 9'' wide cut in running condition. 

216
Ariens Snow Blower
Ariens Snow Blower, 5 horse power with a 22'' cut, 2-stroke gas engine, single stage, in running condition, Serial number 938017

217
Ariens Path Pro Snow Blower
Ariens Path Pro Snow Blower, 136cc 4-stroke gas engine, 21'' cut, single stage chute, recoil start, in good running condition, 

218
Ariens Path Pro Snow Blower
Ariens Path Pro Snow Blower, 136cc 4-stroke gas engine, 21'' cut, single stage chute, recoil start, in good running condition,

219
Mainline Garden Tractor with Quick Hitch
6 LD 400 Lombardini diesel engine, differential drive, 4 speed forward 1 speed reverse, electric start, includes 2 adjustable tiller boxes 18"-30", small set of wheels, 2 way log splitter, 54" sickle mower and a dump trailer, everything works like it should 

220
Log Splitter
MTD Log Splitter with a ram force of up to 25 tons.  It is powered by a Briggs and Stratton 8 horsepower engine.  

221
Miller Big Blue 250D Welder
Miller Big Blue 250D diesel powered welder.  It is powered by a Duetz diesel engine that puts out 20 Kw, it has 4917 hours, it is on a trailer, comes with leads and cables, has electric start, sells with bill of sale.   In good working condition.  

222
Allen Vibrating Concrete Screed
Allen Vibrating Concrete Screed Model 12.  It is air driven, approximately 45' long, in good working condition.  

223
Herkules K-900 Portable Auto Lift
Herkules K-900 Portable Auto Lift. Drive on lift with 6'000 lb capacity, Air operated with airbags underneath, Lifts 30'' from the ground, in good working condition, comes with manual.

224
Retaining Wall Blocks
Retaining Wall blocks, measures 40'' high, 46'' wide, and 72'' long.  Weight is approximately 3'000 lbs each, 11 pieces total, some do have cracks, decorative design on the front side, 

225
Lockers
3 sets of lockers with 3 lockers in each set.   Each section is 36'' wide and 15'' deep and they stand 77'' high.  The each have hooks and a shelf and are pad lock ready.  

226
Portable Board Edger
Portable Board Edger with return, 4'' X 32'' capacity, It has 1 blower mounted that is 24'', also has hydraulic controls and has new blades.    

227
E-Z Chop Slab Saw
E-Z chop Slab Saw, all manual with 20'' X 8 1/2' in feed. 

31
John Deere 544-B Wheel Loader
John Deere 544-B Wheel Loader with forks and bucket and currently has 5'800 hours, It has a straight 6 cylinder diesel engine, 4-wheel drive, full cab with heat, windows do open and the tires are bald.  

228
Belt Conveyor
16'' X 6' belt conveyor, hydraulic drive. 

229
Gear Box
Right angle gear box.

230
Transfer Deck
3-strand transfer deck, 5' wide X 12' long, hydraulic drive, 

231
Belt Conveyor
20'' wide X 14' long belt conveyor, hydraulic drive. 

232
Hydraulic Pump Station
Hydraulic Pump Station, with 2 vane type pumps mounted on jack shaft.  1 Hydraulic motor with vickers relief valves. 

233
Baker Incline Conveyor
Baker Incline Conveyor,  14' long, 28'' wide, electric drive, 3 phase

234
Conquest Reversing Auger
Conquest Reversing Auger, 12' long and 12'' wide, 2 HP electric Baldor Motor. 

235
Military Notcher
Military Notcher,  1'' dado, 5 hp electric motor, 3-phase, 10' long, 6'' wide roller conveyor. 

236
Brettrager Bolt Mill
Brettrager Bolt Mill, holds up to a 84'' log, 36'' inserted tooth blade, hydraulic drive table,  It has a 40 hp 3-phase electric motor and is in working condition.  

237
Hannah/West Plains Scrag Mill
Hannah (West Plains) Scrag Mill with dual 36'' inserted tooth blades,  adjustable width, dual 50 hp electric motors.  

238
Snow Bucket Repair Station
Snow Bucket Repair Station, It is fully hydraulic to lift and rotate various sizes of snow buckets for repair and extends and retracts to accommodate different widths of buckets and snow pushers.  It was in working condition when last used. 

239
7Y Box style Debris Box

239A
3 YWC Trash Hopper
3 YWC Trash Hopper with skid loader attachment

240
2 YWC Trash Hopper
2 YWC Trash Hopper with fork pockets, self dumping

241
2 YWC Trash Hopper
2 YWC Trash Hopper with fork pockets, self dumping 

242
SMLDW 2.0
SMLDW 2.0  hopper set up for skid loader quick attach

243
SMLDW 2.0
SMLDW 2.0 hopper set up for skid loader quick attach 

244
Cattle Feeder
Cattle Feeder Blue

245
Cattle Feeder
Cattle Feeder Blue

246
Cattle Feeder
Cattle Feeder Blue

247
Cattle Feeder
Cattle Feeder Blue

248
Cattle Feeder
Cattle Feeder Blue

249
Cattle Feeder
Cattle Feeder Blue

250
Cattle Feeder
Cattle Feeder Blue

56
Case SR200 Skid Loader
2016 Case SR200 Skid Loader powered by a 4 cylinder turbo charged diesel engine rated at 74 horse power and only 1642 hours.  It has a full cab with heat and air conditioning, auxiliary hydraulics, quick attach, radio, lift capacity of 2'000 lbs, It has been recently serviced and everything works as it should.   Does not sell with attachments, Product ID number JAT-SR200CGM414449    

251
Cattle Feeder
Cattle Feeder Blue

252
Cattle Feeder
Cattle Feeder Blue

253
Cattle Feeder
Cattle Feeder Blue

254
Cattle Feeder
Cattle Feeder Blue

255
Cattle Feeder
Cattle Feeder Blue

256
Cattle Feeder
Cattle Feeder Blue

257
Cattle Feeder
Cattle Feeder Blue

258
Cattle Feeder
Cattle Feeder Orange

259
Cattle Feeder
Cattle Feeder Orange

260
Cattle Feeder
Cattle Feeder Orange

261
Cattle Feeder
Cattle Feeder Orange

264

262
Cattle Feeder
Cattle Feeder Orange

263
Cattle Feeder
Cattle Feeder Orange

265
3/8" AR500 Steel Deer Shooting Target with Heart Flapper

266
3/8" AR500 Steel Coyote Shooting Target with Heart Flapper

267
3/8" AR500 Steel Wild Boar Shooting Target with Heart Flapper

268
AR 500 Steel Dueling Tree for .22 Caliber

269
AR 500 Steel Dueling Tree for .22 Caliber

270
AR 500 Steel Dueling Tree for .22 Caliber

271
AR 500 Steel Dueling Tree for .22 Caliber

272
AR 500 Steel Dueling Tree Shooting Target 3/8"

273
AR 500 Steel Dueling Tree Shooting Target 3/8"

274
AR 500 Steel Dueling Tree Shooting Target 3/8"

275
AR 500 Steel Dueling Tree Shooting Target 3/8"

276
29" X 90" Steel Work Bench

277
29" X 90" Steel Work Bench

278
29" X 90" Steel Work Bench

279
29" X 90" Steel Work Bench

280
29" X 90" Steel Work Bench

281
29" X 90" Steel Work Bench

281A
29" X 60" Work Bench

281B
29" X 60" Work Bench

281C
29" X 60" Work Bench

281D
29" X 60" Work Bench

281E
29" X 60" Work Bench

281F
30" X 57" Small Table 5/16" Black

282
30" X 57" Small Table 5/16" Black

283
30" X 57" Small Table 5/16" Black

284
30" X 57" Small Table 5/16" Black

285
30" X 57" Small Table 5/16" Black

287
30" X 57" Small Table 5/16" Black

286
30" X 57" Small Table 5/16" Black

288
5/8" Steel Plate / Road Plate
5/8" Steel Plate / Road Plate  3 pieces  60" X 120"

289
1/4" Steel Plate / Road Plate
1/4" Steel Plate / Road Plate 6 pieces  73"X 123"

290
1/4" Steel Plate / Road Plate
1/4" Steel Plate / Road Plate 6 pieces 73"X 123"

290A
1/4" Steel Plate / Road Plate
1/4" Steel Plate / Road Plate 6 pieces 73"X 123"

291
Brine Tank 1'000 Gallon
Brine Tank 1'000 gallon with lid

292
Brine Tank 1'000 Gallon
Brine Tank 1'000 gallon with lid

293
Brine Tank 1'000 Gallon
Brine Tank 1'000 gallon with lid

294
Brine Tank 300 Gallon
Brine Tank 300 gallon with lid

295
100' Belt Conveyor
100' Belt Conveyor with 10' sections.  Belt is 24'' wide and comes with electric drive 3HP 3-phase Baldor Electric Motor. 

296
Oliver Edger
Oliver Edger with up to 9" opening plus infeed, 16" inserted tooth blades, one of which is moveable and one is moveable. 25HP 3-phase motor.  

297
Morbark Chipper
Morbark Chipper, 48", 6 knife, side feed, top discharge, with infeed, good unit.  

298
30" Dust Blower
30" Dust blower in good condition, hydraulic drive. 

299
Shipping Container
8' X 20' Shipping Container. It is 8 1/2' high, has double rear doors and weighs approximately 5'000 lbs.  It could also be useful for storage.

300
Shipping Container
8' X 20' Shipping Container. It is 8 1/2' high, has double rear doors and weighs approximately 5'000 lbs. It could also be useful for storage.

301
Ingersoll Rand Air Compressor
Ingersoll Rand T30 air compressor.  It has a 120 gallon capacity air tank, twin cast iron cylinders, 3-phase 10 horsepower electric motor.  It is in good working condition.  

302
Torch set
Oxy-Acetylene torch set that is on a cart and includes the torch, hoses and gauges.   

303
Torch set
Oxy-Acetylene torch set that includes tanks, hoses, torch and gauges.  No cart.  

304
Cantek Wide Belt Sander
37" single head, hydraulic and air controlled, needs some repairs, made in Canada

305
Zenith Scissor Lift/Pallet Jack*
Serial # ZMSL-31831, 2200 lb. lift, 32" max height

306
MTD Snow Blower
MTD Snow Blower that makes a 28'' cut and powered by a 277cc 4-stroke engine and has electric start with recoil back up.   It has 6 forward speed and 2 reverse.  It is in good running condition.   

310
6' Werner Aluminum Step Ladder

311
8' Keller Fiberglass Step Ladder

312
Otter Sport Kayak
Otter Sport Kayak that comes with paddle and life vest. 

313
Cub Cadet RT65 Tiller
Cub Cadet RT65 Tiller with a Honda GC190 engine with dual directional tines.  In good condition.  

314
Predator 4000 Generator
Predator 4000 Generator.   3'200 running watts with 4'000 watt peak.  212cc predator engine in good condition.  

315
Workbench with Vice

316
Rockwell Table Saw
Rockwell 10" Table Saw in good condition.

317
Skil Saw Chop Saw
Skil Saw Chop Saw in good condition

318
Lawn Roller 38"
38" plastic lawn roller in condition 

319
6 Gallon Air Compressor
6 Gallon Air Compressor, single phase, 120 volt, comes with new Senco 1/4'' 50' air hose.  

320
Portable Meadows Saw Mill
Portable Meadows Saw Mill that does have air dogs and manual set works, It does need some repair and belts.  

321
Sullair Air Compressor
Sullair Air Compressor,  185 CFM, 4 cylinder GM gas engine, 1252 hours,  pintle hitch, in good running condition.  Serial Number 810-410

322
Dayton Ready Heater
Dayton Ready Heater, kerosene or diesel power, 210'000 BTU.   In good working condition.  

323
Ingersoll Rand Compressor Cylinders
Ingersoll Rand Compressor Cylinders, 2 cylinder, model 2475, SN 30TC940505

324
Honda GX160 Engine
Honda GX160 engine, V-twin, 18 HP, side shaft and electric start, recently serviced and in working condition.  

325
Husqvarna Chain Saw
Husqvarna Chain Saw  345, 15" bar, 2-stroke engine, has a brake issue, running condition,   

326
Organizers and File Cabinet
Organizers and File cabinet all in one lot 

327
John Deere Lawn Sweep
John Deere Lawn Sweep in good operating condition.   

328
JET Metal Band Saw
Jet Metal Band Saw.   Electric drive, 3/4 hp, in working condition.  

329
Delta Rockwell Drill Press
Delta Rockwell Drill Press,  1/3 hp electric motor, in working condition.

330
Bench Grider
Bench Grinder / Chain Sharpener.   

331
Billy Goat Leaf Vac
Billy Goat Leaf Vac with a 5 HP Briggs and Stratton engine, Just serviced this year but has not been used since.    

332
2 New Cupolas
2 New Cupolas for your next building project.  new and not used 

333
9 Boxes of Cedar Shake Siding, New
9 Boxes of Cedar Shake Siding.  Autumn Red color, siding is New.  

334
Work Light
Very bright work light in good condition. 

335
Scaffolding Pieces
6 pieces of scaffolding, good condition. 

336
Oil Tank With Hose
Oil Tank with hose on retractable reel, Tank has approximately 10-15 gallons of 15W-40

337
Grease Hose
Grease hose on retractable reel. 

338
Steel Workbench and Contents
Steel Workbench and Contents 

515A

339
Box of Misc Wrenches
Box of Misc wrenches, various sizes and brands

340
2 boxes of sockets
2 boxes of sockets, various sizes and brands 

341
1" Drive Socket Set
1" Drive socket set, various sizes

342
FMC Rivet Press
FMC Air Powered Rivet Press,   120-160 psi, model B-85  Serial number 2312

343
Crate of Organizers
Crate of Organizers with misc parts, pieces and fittings, 

344
Bench Vice
Bench Vice with 6" Jaw.

345
Large Prentice Vice
Large Vice by Prentice Vice Company,   No,. 56

346
Pallet of Belts
Pallet of MIsc belts, various sizes, brands and sizes, 

347
DR Power Equipment Electric Log Splitter
DR Power Equipment Electric Log Splitter model K22.  1/2 HP single phase Farm Duty electric motor.    In working condition.  

500
2016 Bobcat T-630 Skid Steer
2016 Bobcat T-630 tracked skid steer.   It has a Bobcat Engine rated at 74 horse power, 2-speed, auxiliary hydraulics, hand and foot controls, power quick attach, suspension seat, 78'' bucket, 3'450 hours, Deluxe panel, lift capacity of 2'100 lbs, tracks are at about 60%.  It has a fresh tune and service with a new battery and starter.  Product ID number: AJDT13366

500A
2008 Bobcat T-320
2008 Bobcat T-320 with 3'451 hours.  It is powered by a Kubota diesel engine rated at 92 horse power.   It has a 84'' bucket, auxiliary hydraulics, full cab with heat and air conditioning (needs a door), hand controls that are either in H or ISO pattern, a lift capacity of 3'200 lbs, quick attach, code start, operating weight is 9'702 lbs, fuel gauge does not work, hand controls need work. Serial Number A7MP60507

500B
CAT 299C Skid Loader
CAT 299C skid loader with 6'619 hours.   It has a CAT 2236 Turbo charged diesel engine rated at 94 horsepower.  It is a 2-speed and has high flow auxiliary hydraulics, ISO hand controls, full cab with heat and air conditioning, suspension seat, 78" bucket, power attach, a lift capacity of 4'150 lbs, tracks are about 80%, Everything works.   Serial Number CAT0299CJJSP00412

500C
Bobcat T-180 Skid Loader
Bobcat T-180 Skid Loader.  It is powered by a Kubota 4-cylinder turbo charged engine rated at 61 horsepower and has 3'731 hours.   It comes with a 68" bucket, qucik attach, auxiliary hydraulics, hand and foot controls, a lift capacity of 1'800 lbs, machine weight is 7'367 lbs, it does have heat but the glass and door is missing, tracks are under 25%.  Everything works.   Serial Number: A3LL37408

500D
Bobcat T-190 Skid Loader
Bobcat T-190 Skid Loader with 5400 hours that is powered by a Kubota V2003T turbo diesel engine that is rated at 61 horsepower.  It had a complete engine overhaul at 5'317 hours and has a new cylinder head at that time also.  It has a 63'' bucket, auxiliary hydraulics, a 1'900 lb lift capacity, full cab with heat , hand and foot controls, power attach, new drive belt, weighs 7'612 lbs, tracks in good condition.   The left side drive does leak oil.   Serial number: 519311477                                              

500E
CAT 277 Skid Loader
CAT 277 Skid Loader Powered by a turbo diesel engine rated at 94 hp.  It comes with a 80'' bucket and has a lift capacity of 3'200 lbs.  It is joy stick controlled, has a full cab (needs door), new rollers in 2018, auxiliary hydraulics, quick attach, tracks under 25%, hour meter has been changed (see picture). fuel gauge not working, new left side drive motor, last serviced in November of 2020.   Serial Number :  CATbb277jcncb1682

501
John Deere 325 Skid Loader
2006 John Deere 325 Skid Loader.  Powered by a turbo charged diesel engine and has a lift capacity of 2500 lbs. It has additional weights in rear, full cab with heat and air conditioning, quick attach, sells with 72'' bucket, hand and foot controls, 2-speed, auxiliary hydraulics and has 3050 hours.    *** NOTE   Tracks that are on the machine do not sell with but are going to be available seperatly.

502
New Holland LS216 Skid Loader
New Holland LS216 Skid Loader with a 60 horse power turbo charged diesel engine and has 3'425 hours.  It has a lift capacity of 1'600 pounds, hand and foot controls, full cab (needs front door), 60'' bucket, heat, power attach, newer tires, auxiliary hydraulics, suspension seat, new battery.    Product ID Number: JAFOL216CDM477968

502A
Gehl 5640 Turbo Skid Loader
Gehl 5640 Turbo Skid Loader with 8'226 hours.   It is powered by a Duetz diesel engine rated at 82 HP. and has a lift capacity of 2'200 lbs.  It has a full cab (door missing) hand controls, sells with 67'' bucket, steel tracks are included, tires are at about 75%,  everything works, left lift cylinder could use a new seal,   Serial Number GHL05640E00508183

503
ASV MD2800 Track Skid Steer
ASV MD2800 Track Skid Steer with an 70 horse power Isuzu diesel engine. It has lift capacity of 2'100 lbs, 3'072 hours, high flow hydraulics,posi-track, hand controls, new seat, 72'' bucket, quick atatch, serviced 10 hours ago, undercarriage is about 75%, tracks are 18'' wide, everything works and is in good condition,   Serial Number 0073-00WTD

503A
Bobcat 753 Skid Loader
2003 Bobcat 753 skid loader with 5'649 hours.  It has a 2.2 liter Kubota diesel engine that makes 43 horsepower.  It has a lift capacity of 1'300 lbs, comes with a 60'' bucket, has a full cab with heat, auxiliary hydraulics, weighs 4'740 lbs.  The tires are at about 25%, has had the same owner the last 15 years.   Serial Number 515839684

504
Bobcat 853H Skid Loader
Bobcat 853H wheel skid loader with an Isuzu diesel engine rated at 58 horsepower with 4047 hours.  It has a full cab with heat, hand and foot controls, 78'' bucket, auxiliary hydraulics, lift capacity of 1'700 lbs, everything works, tires are at about 20%.   Product ID number 51281166. 

505
Bobcat 553 Skid Loader
Bobcat 553 Skid Loader with 2'790 hours.  It is powered by a Kubota diesel engine and has a lift capacity of about 950lbs, It wil have New Tires by auction time, does not come with attachments, Engine is rated at apporximately 35 hp.  Serial Number 516312071

505A
Hydra Mac 12C Skid Loader
Hydra Mac 12C Skid Loader.  It has a 4-cylinder Chrysler gas engine rated at 20-30 horse power, and has a lift capacity of around 1'300 lbs,  It sells with a 66'' bucket, pallet forks and a bale spear.  The hour meter shows 2'537 hours but it is unknown if that is correct,  It has a new Weber carb this year and it does run and opperate.   Serial Number 33233

506
CAT MT965B Tractor
CAT MT965B Tractor that features a 510 horsepower 18.1 liter 6 cylinder turbo diesel CAT 2236 engine.  The power shift transmission has 16 forward gears and 4 reverse. Max speed of 24 mph, 4 remote control valves, 390 gallon fuel capacity, 60'000 operating weight,  the left rear tire needs to be repaired but does hold air for a few days and batteries will need to be replaced.  Tractor shows 18'821 service hours ,   Serial number AGCC0965JNTTF1107

507
1974 Massey Ferguson 1135
1974 Massey Ferguson 1135 with only 2'690 original hours.  It is powered by a 5.8 liter 6 cylinder turbocharged diesel engine that puts out 134 horse power and is backed by a multi speed power shift transmission.  It has a PTO, drawbar, 3-point hitch and newer paint.  The 3-point does need some valve work but other than that the tractor is in excellent working order.   Serial Number 9B45257

508
New Holland Tractor with Ford Front End Loader
Model 3415 with under 700 hrs! 44 HP, live PTO (38 HP) 2WD, 3-point hitch, sells with bucket, this tractor was well maintained and is in good working condition. 

508A
John Deere 4640 Tractor
1979 John Deere 4640 Tractor with 8'853 hours.   It is powered by a 7.6 liter 6-cylinder turbo charged diesel engine that makes 185 horsepower and is backed by a 8-speed full power shift transmission that has 8 forward and 4 reverse gears.  It has a 3-point hitch, PTO rated at 155 hp, draw bar, full cab with heat.  The 3-point hitch does go up and down but not to full height, that cab does not have a radio and there are signs of heavy wear (see pictures).  The alternator is not working but does if you jump it. Just out of the shop see invoice in pictures.  Serial Number 4640P009952R 

509
Kubota M4500DT Tractor
Kubota M4500DT Tractor with 6' bucket.  It has a 55 horse power 6 cylinder diesel engine with a 8-speed transmission and 2 speed reverse.  It is a 4-wheel drive and has 1928 hours. It also has a draw bar, 3-point hitch, pto, rear hydraulics.  The front loader bucket extends to 10' high and everything works as it should and was last serviced at 1840 hours.   Serial number  103269   Engine model number S2600-A

510
Kubota B2710 Tractor
Kubota B2710 compact utility tractor with 820 hours and in good running condition.  It is powered by a 1.3 liter in line 4 cylinder diesel 27 horsepower engine with a hydrostatic transmission. It has 4 wheel drive, a 52'' loader bucket, power steering, 3 point hitch and a PTO. 

511
Kubota BX1500 Tractor
Kubota BX1500 sub compact utility tractor  powered by a 15 horsepower .6 liter diesel engine with a hydrostatic transmission. It has 4 wheel drive, turf tires, a 48'' loader bucket, mower deck, power steering, 3 point hitch, draw bar and a PTO. 1285 hours.  

512
Tractor King JM-254
Tractor King JM-254 with a 1.5 liter 3-cylinder diesel engine and a 12 speed transmission that has 4 reverse gears and is 4-wheel drive.  It does have a 2 post open ROPS with a roof, 3-point hitch, draw bar, live 540/1000 pto and weighs 2'514 lbs.   Serial Number: 05121000412

512A
John Deere Model A
1946 John Deere Model A with a 5.1 liter 2 cylinder gas engine rated at 26 horse power, 4 speed transmission with reverse, 540 PTO, draw bar.  It does run and drive. 

513
Minneapolis-Moline Tractor
Minneapolis-Moline Tractor   Model 4 1/4 X 5,  Serial number 01914011.   It does run and operate, has row crop front end, 4 cylinder engine, rear draw bar, pto, rear hydraulics,.  

514
Cub Cadet Lawn Tractor with Snow Blower
Cub Cadet Lawn Tractor with Snow blower and cab.  It has a 20 horse power Kohler V-twin engine and hydrostatic transmission. It has a 42'' 2 stage snow blower that is direct drive.  The rear wheels are weighted and does come with tire chains.  It runs well and has 952 hours. 

514A
Cub Cadet Lawn Tractor
Cub Cadet Lawn Tractor, that has 479 hours, 624cc Kohler engine, 48'' deck.  It does run and drive, mower deck does not engage.   

514B
Simplicity Lawn Tractor
Simplicity Lawn Tractor, It has 649 hours, 44" mower deck, hydrostatic transmission, Briggs and Stratton 22 HP 646cc engine, runs and drives

514C
Simplicity Lawn Tractor
Simplicity Lawn Tractor in excellent running condition.  It has 243 hours, 724cc  23 HP Briggs and Stratton engine, 50" mower deck, hydrostatic transmission.  

514D
Simplicity Lawn Tractor
Simplicity Lawn tractor with a 17 hp Kohler engine and hydrostatic transmission.  The mower deck is 48'' wide, snow blower attachment is 42" wide and comes with a leaf vac and cab encloser for use when blowing snow. everything works as it should.  

515
Gehl DL6L-42 Telehandler
Gehl DL6L-42 Telehandler with 5200 hours.  It has a 42' reach, 4-wheel drive, 4-wheel steering, foam filled tires, full tilt, turbo diesel 115 horse power engine, 4-speed transmission, lift capacity of 7'000 lbs and has a new seat.   This machine works and operates as it should.  

516
Gradall Telehandler 534C
Gradall 534C Telehandler It has a lift height of 36' and a reach of 23' and lift capacity of 6'000 lbs, 4-wheel drive, rear wheel steering, hydrostatic drive, hours are unknown, 4 cylinder Cummins diesel engine rated at 76 horsepower , carriage tilt, operating weight with carriage and forks is 17'830 lbs.   Serial number 0288793

516A
Sanderson Telehandler
Sanderson Telehandler model 11-30.  It has a reach of 36' and weight capacity of 6'000 lbs.  It can be switched from 2 or 4-wheel drive and the steering can be front,rear or crab style steering.  It is powered by a Ford 4-cylinder diesel engine and has a 4-speed transmission and shows 5'538 hours. The frame does tilt, has a new hydraulic pump, does have a few minor leaks and the front left wheel has a oil leak also.   The tires are at about 50%.   

517
Dyna SC15 Firewood Processor
2018 DYNA SC15 firewood processor, 34 hp CAT diesel, just under 900 hrs, 14 foot conveyor, this machine has been refurbished by the factory with some 2019 updates. It has a 4 way splitter wedge, it is fully updated and loaded, ready to work. This machine has always been owned by DYNA RENTALS, it was used as a rental unit, maintained to DYNA specs and is ready to generate revenue for you!  

518
Dyna Model SC16 extended frame Firewood Processor
New in 2011, only 2200 hrs. powered by a John Deere diesel, new control panel just over 200 hrs. ago. Good Operating Condition, NICE MACHINE!

519
Case 621B Wheel Loader
Case 621b Wheel Loader.  Hour meter shows 1619 hours but it is believed to have rolled over with actual hours being 11'619.   It is powered by a 6T-590 turbo diesel engine rated at 128 horse power, transmission has 4 forward and 3 reverse gears, 8' bucket with a heaped capacity of 2.23 yards,weight is 27'250 lbs,  full cab has heat, in good working condition.  Product ID Number:  JEE0039905

520
Case W18 Wheel Loader
Case W18 Wheel Loader that does have a bad engine.  It comes with an 8' quick attatch tooth bucket, hours are unknown, some cylinders have been repacked and has air brakes.  

521
Bobcat 430 Mini Excavator
Bobcat 430 Mini Excavator with 2494 hours,  It does have a full cab with heat and air conditioning, It is powered by a 4 cylinder 42 horse power diesel engine.  It has a reach of over 16' a dig depth of 10' a operating weight if just over 8'000 lbs, rubber tracks, a 24'' 5 tooth bucket with thumb, a 70'' blade, runs and operates as it should.  

521A
1996 Samsung SE 210 LC-2 Excavator
1996 Samsung SE 210 LC-2 Excavator with 5'984 hours.  It is powered by a Cummins Diesel engine rated at 136 horsepower model number 6BTA5.9L  It has 32" wide tracks with a good under carriage (see pictures), A 4' wide 5-tooth bucket with stationary thumb, a full cab with heat.  Weighs in at 43'500 lbs.   Everything works except for the fuel gauge.  Serial Number FBY1892

522
John Deere 690C Excavator
John Deere 690C Excavator with 5'234 hours, It does run and operate as it should, undercarriage is at 75%, it can reach 30' across the ground, powered by an inline 6-cylinder turbo charged 6-466T engine rated at 134 horse power, operating weight is 39'935 lbs, tracks measure approximately 9 1/2' outside width,  does not have front window. 

523
Case 580 Super L Backhoe Loader
Case 580 Super L Backhoe Loader with 4'784 hours.  The backhoe has a dig depth of 14'5'', reach from swivel is 18'1'', dig force is 13'126 lbs, reach height is 8'9'' from swivel.  The loader bucket is 82'' wide with a lift capacity of 6'182 lbs and has a clearance of 8'1''.  It is powered by a Case 4T-390 turbo charged diesel engine that puts out 91 horsepower and is backed by a 4 speed transmission with reverse. Operating weight is approximately 13'000 lbs.   Does need some windows.   Product ID Number: JJG0268126

523A
Mitsubishi LD350 Crawler Dumper
Mitsubishi LD350 Crawler Dumper, In running condition, needs some break work, hours are unknown, undercarriage is in good condition,

524
Timberjack 360 Grapple Skidder
Timberjack 360 Grapple Skidder in excellent working condition.  Powered by an inline 6 cylinder diesel engine,  Currently showing 10'738 hours and had a rebuild about 300 hours ago. The cab has heat, stereo, cb radio, newer tires,   Everything works as it should.  Serial number 10EB1161

525
John Deere 440B Skidder
JD 440B Skidder, meter reads 5280 hrs. good strong winch & cable w- 3 chokers. Power shift, NEW TIRES in rear, front tires @ 50% (front tires do have a little dry rot) runs and operates very good. Appears to have a strong transmission. Rebuild motor approx.. 500 hrs. ago. A little oil underneath but no major leaks. Overall good condition. Woods ready.  

526
Clark Forklift
Clark Forklift model C40B.  It has a 2 stage mast, 4'000 lb lift capacity, 42'' forks, new battery and is LP powered.  It does run but does have a crack in the head and will need new tires.   Serial Number 1809-893-868

526A
Crown Electric Lift
Crown Electric Lift with 504 hours.   It has a lift capacity of 2'000 lbs and weighs 1'410 lbs. It has 4 batteries and holds a charge well.   Model 20MT  Serial number 1A115776

527
Case 310F bull dozer
1964 Case 310F bull dozer, It has a 4 cylinder gas engine, 7'4'' mechanical 4-way blade with hydraulic lift, PTO, 14'' wide tracks, under carriage has good sprockets and pins.   Serial number 3021457  sells with manuals. 

527A
Caterpillar D-4 Dozer
Caterpillar D-4 Dozer with 78'' 4-way blade.  It has a 4 cylinder CAT diesel engine and it is in good working condition. The pony motor is not currently working, hour meter shows 4'950 hours, has newer battery, undercarriage is at or above 75%.  Serial Number 6U4423

528
Genie Z-60/34 Boom Lift
2000 Genie Z-60/34 articulating boom lift.   It has 3'788 hours as of 12-1-20.  It is powered by a 75 horse power Ford 4 cylinder engine that runs on gasoline or LP, features dual controls, 4-wheel drive, air filled tires,  66' working height, 36' reach, 500lb lifting capacity, 27' up and over clearance, 6' jib, 12 volt auxiliary power, 22'000 unladen weight,  It does have a small oil leak.   Serial number 2204.  

529
2002 Genie S-60 Boom Lift
2002 Genie S-60 boom  lift with 8'705 hours. It has a maximum lift height of 60', a horizontal reach of 50', platform weight rating of 500lbs, the platform rotates 160 degrees, unladen weight is 26'700 lbs, It has good tires, it is 4-wheel drive, It has a Perkins diesel engine and has been well maintained.  Serial Number: S60-8239

530
2000 Genie S-60 Boom Lift
2000 Genie S-60 boom lift with 9'745 hours. It has a maximum lift height of 60', a horizontal reach of 50', platform weight rating of 500lbs, the platform rotates 160 degrees, unladen weight is 26'060 lbs, It has good tires, it is 4-wheel drive, It has a Duetz diesel engine and has been well maintained. Serial Number: S60-6020

530A
MEC Scissor Lift
MEC Scissor lift that is 46" wide and is 12' long while extended.   It has a lift capacity of 1'000 lbs with 300 lb maximum on extension.   It lifts 19' to the top of the cage, has fork pockets and the battery charger is new.  The batteries do need to be replaced. 

531
K-TEC 3100 Scraper Pan
K-TEC 3100 Scraper Pan that has been recently repainted and has new front hydraulic hoses and is in good working condition. Tires are at 20%.  Heaped Capacity (ISO Rated): 28 Cubic Yards Struck Capacity: 18.5 Cubic Yards Max Loading Rating: 68,000 lbs Bucket Dimensions: 12'W x 4'H x 10'6"L Cutting Width: 12' Cutting Edge: 3-Piece Blade Gate Opening: 78" Rack Height (Tiltable): 3' Gate Cylinders: 4.5" x 28" Lift Cylinders: 5.5" x 31" Ejector Cylinder: 5" x 76"

531A
Barreto Stump Grinder
30sg, ser# sg0887, Track Machine, 26.5 hp Kohler Engine, Hydraulic direct drive, 19.25 " cutting wheel, only 428 hrs, 1700 lbs frame, Joy stick controlled head, Fits through a 36" gate, 14" cutting depth, , very good condition!

532
Ditch Witch 5110
Ditch Witch 5110DD with a Duetz diesel engine and a 4 speed manual transmission and has 1'656 hours. It has a 5' arm, approximately 20 hours on new chain, 18'' 4 tooth bucket, 6' blade, 3' plow, auger, outriggers, 4-wheel drive.  It is in good running condition, will need wheel bearings.  Serial number 5K0019

532A
Ray-Go Compactor Roller
Ray-Go Compactor Roller made by Rustler,  It has a 7' wide roller, powered by a Detroit Diesel engine,  It ran when parked 7 years ago and appears to be complete.  hours are unknown,  Serial number: 09B0239

532B
Vermeer Trencher
Vermeer V-3550A Trencher with a Duetz diesel engine and hydrostatic transmission and has 2'735 hours.  It comes with a 4-way 4 1/2' back fill blade, 5' trenching arm that cuts about 3' deep, chain is 3 yrs old, good auger, 4-wheel drive,  It has a few small leaks but runs and operates as it should,  joy stick needs a fitting, Serial Number : 1VRSO72P6V1000114

533
2000 Mack Dump Truck
2000 Mack RD688S dump truck,  It has a E7-350EUP engine backed by a 10-speed Eaton Fuller transmission and is rated at 350 horsepower. It has 501'310 miles and 17'107 hours.  It has a 13' dump bed, aluminum front wheels, decent tires, hitch, new batteries.  It will need rear suspension bushings in the near future.  VIN: 1M2P267Y1YM050896

534
1979 International Dump Truck
1979 International Dump Truck model 2554, Runs and drives, DT466 engine with 4'000 miles on rebuild, 8-speed manual transmission, bed works as it should, new batteries this year, builds and holds air, 304'000 miles on truck, rear tires are cracked,   VIN: CA255JHA28032

535
1997 Chevy S-10 Low Miles
1997 Chevy S-10 pick up truck with only 59'150 miles, It is a standard cab with 2-wheel drive and is powered by a Vortec V-6 engine and backed by an automatic transmission.  It has a 6' bed with a tonneau cover, manual windows and locks.  This truck is very clean inside and out and is rust free.  VIN 1GCCS14X0VK179835

536
2008 GMC C4500 Service Truck 4x4
2008 GMC C4500 Service truck with 4-wheel drive with 218'334 miles.  It is powered by a 6.6 liter Duramax diesel engine and backed by an Allison transmission. It has Reading service body that is set up for an on board welder or air compressor. Truck is in good working condition. VIN: 1GDE4C3978F410353

537
Volvo A25 Water Truck
Volvo A25 Water Truck machine type 5350 with 34'904 miles, 4685 hours and a 4'000 gallon water tank.  Works as it should.   Manufacter number 04749. 

537A
2000 Volvo Boom Truck
2000 Volvo Boom Truck with only 68'246 miles and 4'575 hours of total engine time.   It is powered by a Cummins diesel engine and backed by a 8-speed Eaton Fuller Transmission. It has Hiab Crane mounted that can be side controlled or by remote control.  The remote also has an additional battery and charger in the cab.  It also has outriggers, currently fitted with a drywall cradle, tag axle, air brakes, Good running truck that starts right up.  Tires are 25-75%.   GVWR 77'020 lbs.  VIN: 4V5JC2UF9YN870155

537B
1999 International 4900 Boom Truck
1999 International Boom Truck.   It has a Eaton Fuller 8-speed transmission and a HIAB 235K crane that goes 39' and comes with a drywall cradle.  It currently has 218'782 miles and was DOT inspected on December 11th of this year and has new steer and drive tires.   This truck made its last delivery on December 30th and everything on the truck is in working order except for the air conditioner.   VIN: 1HTSHADR3XH610814  

538
2000 Ford E-350 15 Passenger Van
2000 Ford E-350 15 Passenger Van.  It has a 5.4 liter Triton V-8 engine with an automatic transmission, 158'148 miles,  1-ton chassis and suspension, ducted heat and air conditioning, aftermarket stereo.  The brake light is on but they operate as they should, check engine light on, uses 1 quart of oil every 1'000 miles or so, transmission seal leaks.   VIN: 1FBSS31L3YH830479

539
2005 International 4200 Box Truck
2005 International Box Truck with 163'181 miles, It has a VT365 engine and an Eaton Fuller 6-speed manual transmission, Box is 24' long and total height is 13'1'', swinging rear doors, aluminum ramp, box is dry inside, air brakes, GVWR 25'500 lbs, VIN: 1HTMPAFL35H131648  *** NOTE***   The truck was in running condition when it was parked, now the starter spins and it is assumed it needs rebuilt or replaced, was towed to auction facility, the drive shaft was removed and air brakes are caged for transport.

540
2001 Freightliner FL70 Flatbed
2001 Freightliner FL70 Flatbed with a CAT 3126 Diesel engine and a 6-speed manual transmission, 273'621 miles, air brakes, GVWR 33'000 lbs, dump bed is 18' long, tires are about 30%  VIN: 1FVABTAK91HH86018

541
2007 International 8600 Semi Tractor
2001 International 8600 Semi Tractor with 393'774 miles, It has a Cummins engine with an Eaton Fuller 10-speed transmission, air brakes, single rear axle, day cab, dual fuel tanks, good 5th wheel plate and air hoses, catwalk, tires at about 30% and is in good running condition.  VIN: 1HSHWAHN07J432221

542
2001 Freightliner FL70 Flatbed
2001 Freightliner FL70 Flatbed with a CAT 3126 Diesel engine and a 6-speed manual transmission, 280'023 miles, air brakes, GVWR 33'000 lbs, dump bed is 18' long, tires are about 30% VIN: 1FVABTAK71HH86020

543
2001 Ford F-250 XL Super Duty 4X4
001 Ford F-250 XL Super Duty 4X4 with a 7.3 liter Powerstroke V-8 engine and automatic transmission showing 344,228 miles.  It is a standard cab with an 8' bed, floor mounted shifter for 4-wheel drive,  bed has a headache rack, trailer brakes, hitch, does have low compression on one cylinder,  VIN: 1FTNF21F91ED00627

544
2005 Chevy Silverado
2005 Chevy Silverado with 174'039 miles.  It is powered by a 4.8 liter V-8 engine with an automatic transmission and is 2-wheel drive.  It has a standard cab that can seat 3 with a 8' bed that has a been lined.  It comes with power windows, locks and mirrors, tow hitch and trailer lights.  The check engine light is on and the brakes are soft, tires are at about 30%. One owner vehicle with minimal rust for its age.   VIN: 1GCEC14V05Z307034

545
1997 GMC C6500 Flatbed
1997 GMC C6500 powered by a CAT 3116 diesel engine and backed by an automatic transmission.  The bed is 8' X 18x and will need new decking. It has 1 tool box, 1 fuel tank, the interior is clean,  it runs with 103k miles, GVWR 25'300, needs brake work, sells with title.  VIN: 1GDJ7H1J6VJ519444

546
1994 Ford F-150
1994 Ford F-150 with a 4.9 liter straight 6 cylinder engine and an automatic transmission. It has an 8' bed with a cap, set up for trailer brakes.  It does need brake work and sells with a title.   VIN: 1FTEF14Y8RLA76295

547
2003 GMC W3500
2003 GMC W3500 powered by a Isuzu diesel engine and backed by an automatic transmission with 100'500 miles, It is a cab over and has a 8' X 18' bed with stake sides that are removable. It runs and has good tires, It needs brakes and the windshield is cracked. It does sell with a title. VIN: J8DB4B14037006434

548
2006 Sterling AT9500 Semi
2006 Sterling AT9500 Semi with a day cab with a Mercedeez Benz engine with a Eaton Fuller 8-speed transmission and shows 605k miles and 22k hours.  It has good tires, two 100 gallon tanks, good 5th wheel plate and hoses, wet kit. It is not in running condition and does sell with a title. VIN: 2FWJA3CV76AV32742

549
2004 Dodge Ram 1500
2004 Dodge Ram 1500 with a Magnum 3.7 liter V-6 engine and an automatic transmission,171'959 miles, It has a standard cab, short bed, hitch, 2-wheel drive, some rust, tires are at about 50%, It does run but dies at idle, VIN: 1D7HA16K44J124826

549A
2000 Dodge Ram 3500
2000 Dodge Ram 3500 with 275'007 miles.  It has a Cummins diesel engine and an automatic transmission and is 2-wheel drive. The transmission was just replace with a rebuilt transmission with only 100k miles on it.  It has and extended cab, dual rear tires, contractors utility body, tow package with trailer brakes, tires in good condition,   truck runs and drives but does need brakes, Service records included.    VIN: 1B7MC3367YJ184482

549B
1993 Chevy Plow Truck K3500
1993 Chevy Plow Truck  K3500 4X4.  It has V-8  gas engine with an automatic transmission and floor mounted shift for 4-Wheel drive.  It currently has 162'087 miles.  It does have a motor knock that is undiagnosed.  It comes with a Western 8' snow plow.  It is a standard cab with an 8' bed and has trailer brakes.   VIN:  1GCHK34K5PE198906

549c
2001 Jeep Grand Charokee
2001 Jeep Grand Charokee with 246'822 miles.  It has a 4.0 liter straight 6 cylinder engine with an automatic transmission.  It does have 4-Wheel drive but the drive shaft is missing.  It has a heated leather interior, power windows, locks, mirrors and seats.  It is a 4 door that seats 5 and has good heat.  The tires are in near new condition.   VIN: 1J4GW58S71C703623

549D
2000 Ford F-250 XL Super Duty 4X4
2000 Ford F-250 XL Super Duty 4X4 with 260'899 miles.  It is powered by a 7.3 liter Power Stroke V-8 diesel engine and has an automatic transmission and has 4-wheel drive.   It is a crew cab, has a cap, 8' bed, goose neck hitch, extra set of wheels and tires inside bed, has manual windows and locks, only one battery currently,    Runs and drives.    VIN: 3FTNW21F4YMA28461

549E
2003 Chevy Silverado 2500
2003 Chevy Silverado 2500 work truck.   It has a 6.0 liter gas V-8 engine with and automatic transmission and is 2-wheel drive with 273'209 miles.  It is a standard cab with an 8' bed and has a towing package, trailer brake controller, tool box, manual windows and locks  Runs and Drives body is in good condition for age.   VIN: 1GCGC24UX3Z131855

550
Polaris Snowmobile
1981 Polaris TXL 340 snowmobile Serial Number 0801627.  It has a 2 cylinder, stroke 340cc engine.  It does start and run and could use some TLC.  Sells with Bill of Sale.  

550A
2005 Honda Rincon 650
2005 Honda Rincon 650 four wheeler, Model TRX650FA.  It has a 650cc engine, automatic transmission that can also be shifted electronically, can be switched from 2WD to 4WD, has a 2'000 lb superwinch, hitch, independent rear suspension, It  has 5'532 miles.  This machine does not run as it has sat for approximately 3 years.  Sells with Bill of Sale only 

551
Equipment Trailer
Nation Equipment Trailer,  It is an 8' wide X 20" long with a 5' dovetail and ramps that is rated at 14'000 lbs.  It is a deckover and the deck is in good condition.  It has a heavy duty jack, adjustable tongue, trailer brakes that work well, side storage box and chain box, pulls with 2 5/16'' ball, it was built new in 09/2018.   VIN: 4A9F32529K1048149

552
2009 XL Specialized Equipment Trailer
2009 XL Specialized Trail King equipment trailer that is 102'' wide X 48' long with aluminum pull outs.  It is Mechanical detatch good, tires and brakes, The Glad hands appear to be broken off. 

553
TBT-20 Equipment Trailer
1996 TBT-20 Equipment Trailer. The deck measures 8 1/2' wide and 20' long with 5' dovetail and ramps and has a 20 ton capacity. It will need new decking and it does sell with a title. 

553A
Equipment Trailer
2018 Mastiff tandem axle equipment trailer that was bought new in 2019 and has had very little use. It is 7' wide X 22' long and has built in ramps, axles are rated at 7'000 lbs each with a GVWR of 14'000 lbs. and sits in 16" wheels. Comes with LED lights, trailer brakes, treated floor, heavy duty jack pulls with 2 5/16'' ball. This is in almost new condition and does come with a clear title. VIN: 1M91D262XJG929745

554
FRP Enclosed Cargo Trailer
7' X 12' Enclosed Cargo Trailer. It has a ramp rear door, curb side man door, an aluminum tool rack mounted to the front, aluminum shelving inside, pulls with 2'' ball.  No VIN, Sells with Bill of Sale Only. 

555
2020 Cargo Express Enclosed Trailer
2020 Cargo Express Enclosed Trailer, It is a 6'X12' with a v-nose with a ramp rear door curb side door. It has all LED lights, shelving inside can be removed, pulls with standard 2'' ball, single axle, has dent in diamond plate from bumper, sells with title and is in great condition only used a handful of times.   VIN: 53BCTEA13LA058242

555A
2012 Bay Bridge 8 x 20 Enclosed Trailer
2012 Bay Bridge 8 X 20 Enclosed Trailer.  It has tandem 6-lug axles, swinging rear doors, curb side man door, wired for electricity, has shelves, workbench, microwave, and 12 volt work lights in the rear.  It pulls with 2 5/16'' ball, brakes and tail lights are in working order.   Sells with Title.  VIN: 1B9BE2426CB944015

555B
2017 8' X 16' Discovery Enclosed Trailer
2017  8' X 16' Discovery Enclosed Trailer that is a one owner and custom built with tandem heavy duty 7'500 lb axles.  It has swinging rear doors, curb side man door, ladder to top, ladder rack, inside shelving, brakes, LED lights, pulls with 2 5/16'' ball.   Sells with Title.  VIN: 1D9T11623H1713146

555C
1997 Cargo Express Enclosed Trailer 8 X 16
1997 Cargo Express Enclosed Trailer  8' X 16'   Tandem axle, Swinging rear doors, curb side man door, pulls with 2 5/16'' ball, has shelving in the front, needs new tires,   VIN: 48B500G22V2012701

556
Spartan Car Hauler
Spartan Trailer MFG Car Hauler, It is 7' wide X 21' long, tandem axle with 6 lug wheels, drive on dovetail, diamond plate, removeable fenders, brakes, 5'000 lb winch included, sells with title.  VIN: 4S91CF20DA397232

557
Tilt Deck Trailer
Tandem Axle tilt deck trailer with a 10'000 lb weight rating.  It has 6 lug axles, brakes, heavy duty jack, matching spare tire, stored inside.  Measures, 78'' wide between the rails and is 20' long plus beaver tail.  Sells with Title.   VIN: 1T9FS2022X0372087

558
Rustgo Scaffold Wagon
Rustgo Scaffold wagon work platform, in usable condition with newer tires.  

558A
Utility Trailer
5' X 8' Utility Trailer with 3' ramp gate, in good condition, does have lights, pulls with 1 7/8'' ball, in good condition, sells with bill of sale only. 

558B
5' X 8' Utility Trailer
5' X 8' Utility Trailer,  It has a tilt deck, lights, jack, pulls with 2" ball and sells with Title 

559
Rustgo Scaffold Wagon
Rustgo Scaffold wagon work platform, in usable condition with newer tires.

560
Car Trailer
Home built Car Trailer with Title. It measures 70'' wide between the wheels and is 14' 6'' long and the wheel rails are 17'' wide.  It is a tandem axle with 5 lug wheels, does have trailer brakes, torsion flex suspension, includes a 3'500 lb 12 volt super winch, lights work and pulls with a 2 5/16'' ball.   

561
Home Built Trailer
Home built trailer with a deck size of 56'' wide and 106'' long. It is a single axle with 10'' wheels. It does have lights and a tongue jack, ,pulls with a 2'' ball.  Sells with Bill of Sale only. 

562
Office Trailer
8' X 16' office trailer on single axle, It is wired for electricity and has an air conditioner unit and base board heat, both are in unknown operating condition. pulls with 2 5/16'' ball, will need trailer lights. Sells with bill of sale only.  

563
1999 BMR Dump Trailer
1999 BMR tandem axle dump trailer.  It is 6 1/2' wide and 14' long and pulls with pintle style hitch.  The dump bed, roll top and brakes all work, It does have a rusty floor the rear door latch is broken and the lights need work and the tires are at 25%.   One owner since new.  Sells with title.  VIN: 43YDC1420XC003982

564
1998 BIA Dump Trailer
1998 BIA Dump Trailer.  It is 6' wide X 12' Long, Tandem Axle, It has a pintle style hook up, the dump, roll top and brakes work.  The rear latch needs repair, the floor and fender is rusted and it needs tires.   VIN:  43YDC1221WC001630  Sells with Title

564A
Tarco Leaf Vac
Tarco Leaf Vac with 3'816 hours.  It is powered by a John Deere diesel engine and was built in 11/1998.  It does have a power jack, pintle style hitch and is in good working condition.  

565
Forage Wagon
Myers Equipment Forage wagon.  The bed is 8' wide X 14' long, has an open top, 540 PTO driven, the bed and augers are in good condition.    Serial Number 884028

566
J & M Gravity Wagon
J & M Gravity Wagon,   350 bushel capacity, in good condition, one owner since new, always stored inside, could use new tires.   Serial Number 263181

567
J & M Gravity Wagon
J & M Gravity Wagon, 350 bushel capacity, in good condition, one owner since new, always stored inside, could use new tires. Serial Number 25950

568
J & M Gravity Wagon
J & M Gravity Wagon, 350 bushel capacity, in good condition, one owner since new, always stored inside, new paint,  could use new tires. Serial Number 20165

569
J & M Gravity Wagon
J & M Gravity Wagon, 350 bushel capacity, in good condition, one owner since new, always stored inside, new paint, could use new tires. Serial Number 20164

700
Skid Loader Bucket
John Deere U66 skid loader bucket with edge, 66'' wide. 

701
Skid Loader Bucket
John Deere C76 skid loader bucket,  76'' wide.

702
Skid Loader Bucket
John Deere C76 skid loader bucket, 76'' wide.

703
Quick Attach Bucket
66'' 8-tooth quick attach bucket.  

704
Skid Steer Rock Bucket 84''
Skid Steer Rock Bucket   84''

705
Skid Steer Rock Bucket 80''
Skid Steer Rock Bucket   80''

706
Skid Steer Rock Bucket 75''
Skid Steer Rock Bucket   75''

707
Skid Steer Rock Bucket 66''
Skid Steer Rock Bucket   66''

708
New Skid Loader Forks
Brand new walk through forks for skid loader.  Forks are 42'' long

709
New Skid Loader Forks
Brand new forks for skid loader. Forks are 42'' long

710
New Skid Loader Forks
Brand new forks for skid loader. Forks are 42'' long

711
New Skid Loader Forks
Brand new forks for skid loader. Forks are 42'' long

711A
New Bobcat Skid Loader Walk Threw Pallet Forks

711B
New Bobcat Skid Loader Walk Threw Pallet Forks

711C
New Bobcat Skid Loader Walk Threw Pallet Forks

712
Pallet Forks
Bobcat Pallet Forks, quick attach ready, Forks are 42'' long and have adjustable width, one with hole for trailer ball or pin to move trailers and equipment.  

713
Case Skid Loader Snow Blower
Case Skid Loader Snow Blower.  It is a 2 stage and is 6' wide and 2' high, augers are driven by hydraulics and the chute is 12 volt. It has a good cutting edge and is in good condition. 

714
New Skid Loader Push Pull Snow Plow
New skid loader push pull snow pusher. It is 8' wide and has cutting edge on bottom for pushing and on top for pulling when rotated. 

715
New Skid Loader Push Pull Snow Plow
New skid loader push pull snow pusher. It is 8' wide and has cutting edge on bottom for pushing and on top for pulling when rotated.

716
New Fork Lift Push Pull Snow Plow
New fork lift push pull snow pusher. It is 8' wide and has cutting edge on bottom for pushing and on top for pulling when rotated.

716A
John Deere Skid Steer Snow Blade
John Deer Skid steer snow blade.   9' wide, 4-way blade,   1 cylinder needs repair or replaced.  

717
New 12' Ideal Snow Pusher
New 12' Ideal Snow Pusher for bucket mount on back hoe or wheel loader.  

718
Ideal Snow Pusher
14' Ideal Snow Pusher, quick attach for bucket mount, only 2 yrs old with little use in good condition.  

720
Henke Snow Plow For Wheel Loader 24'
24' Henke snow plow for wheel loader.  It has a 12' main blade and 6' wings on each side.  It is a 6 way blade and wings move independently from each other.  It mounts to a JRB coupler and works as it should.   

720A
12' Snow Pusher
12' Snow pusher for bucket mount, has reversable rubber flap, only used 1 season.  

720B
Western Contractor Grade V Style Snowplow
 in like new condition, the owner stated that it was only used a couple time

721
Skid Steer Snow Plow
8' skid steer snow plow, 6-way straight blade, with very little use in almost new condition.  

722
Blizzard Snow Plow
Blizzard Speed Wing Snow Plow in good condition model 8600SW Sells with controls

723
Western V-Blade Snow Plow
Western V-Blade Snow plow in usable condition, 8' wide. 

724
Fisher Snow Plow
Fisher Minute Mount 2 snow plow, It is 8' wide plus wings, good cutting edge, good working condition, Serial Number 35557

725
Grader Box
Grader box set up for skid loader in good condition and is 6' wide. 

801

726
New Skid Steer Rock & Brush Grapple 84''
New Skid Steer Rock & Brush Grapple  84''

727
New Skid Steer Rock & Brush Grapple 80''
New Skid Steer Rock & Brush Grapple  80''

728
New Skid Steer Rock & Brush Grapple 75''

729
New Skid Steer Rock & Brush Grapple 66''
New Skid Steer Rock & Brush Grapple  66''

730
Skid Steer Root Grapple 70"
Skid Steer Root Grapple 70''

731
Skid Steer Root Grapple 80''
Skid Steer Root Grapple  80''

732
Skid Steer Tine Grapple Bucket

733
Skid Steer Rough Brush Mower
Spartan Equipment rough brush mower for skid steer, 52'' wide cut, articulating, in very good condition. 

734
Stump Grinder for Skid Steer
Stump Grinder attachment for skid steer, It has good teeth and is in good working condition, 

735
Home Built Log Splitter
Home built log splitter, hydraulic operated, will hold a 30'' log, It is 11 1/2' long total.  It was last used hooked up to a front end loader for power.  

736
New Skid Steer Tree & Post Puller

737
Wood Tick Log Grapple
Wood Tick Log Grapple, 72'' wide, last used on an excavator,  operating condition is unknown,  

738
NH 4200 Knuckle boom
NH 4200 knuckle boom ready for trailer mount, 996 KG (approximately 2200lb) capacity, It comes with hydraulic controls, outriggers and a continuous rotation grapple.  This machine was bout new and never used.  

739
Skid Steer Receiver Hitch Trailer Mover

740
Skid Steer Receiver Hitch Trailer Mover

741
Weldable Quick Attach Plate

742
Weldable Quick Attach Plate

743
Weldable Quick Attach Plate

744
Weldable Quick Attach Plate

745
Pallet Fork Extensions

746
Pallet Fork Extensions

747
Pallet Fork Extensions

748
Pallet Fork Extensions

749
3-Point KingKutter Brush Hog
60” works good

750
John Deere Tiller
John Deere Tiller, 8-tines in almost new condition, 3-point lift and 540 PTO driven. 

751
Woods Tiller
Woods Tiller model GHT60,  it has good tines, it is 540 PTO driven, and 3-point lift.  good condition

752
Land Pride Tiller
Land Pride Tiller model RGR1258.   It is 3 point mounted, gear driven, reverse rotation, 7'' working depth, 58'' working width, 7 flange rotor, Serial Number  1526516    Excellent condition. 

753
Kubota Mower Deck
Kubota Mower Deck model RCK60-27B.  Mid mount belly mower with 60'' cut in good working condition, fits several Kubota compact tractors.  

855

754
Bale Spear for 3-Point Hitch
.

856

755
3 Point Grader Blade
Adjustable, 84"

756
Bale Spear To Mount On the Front Of A Bucket
.

757
Quick Attach Plate For Excavator
Quick attach plate for excavator mount.

758
Fisher Salt Spreader
Fisher Salt Spreader for pick up truck, in good condition, 

759
Skid Steer Tracks
Loegering Trail Blazers tracks to fit over tires for wheeled skid loaders for better traction.  

760
Loegering Skid Loader Tracks
Loegering Tire Crawler skid loader  tracks that mount over tires.  in decent condition,  Known to fit a Bobcat 763 and will fit other machines.   15'' wide.  

761
Loegering Skid Loader Tracks
Loegering Trail Blazer skid loader tracks that mount over tires. in decent condition, Known to fit a Bobcat 763 and will fit other machines. 15'' wide.

761A
Skid Loader Tracks
Over the tire tracks for skid loader New Holland Brand.   Last used on a John Deere 325 but will fit other machines as well. 

762
Skid Loader Wheels
Set of 4 skid loader wheels and smooth tires.  Wheels are 8-lug and and holes are 8'' apart center to center, rims are 20'' and tires are 28''

763
Bobcat Wheels and Tires
Bobcat Wheels and Tires, Set of 4, 8-lug, measures 8'' from center to center, 6'' center hole. heavy wall, size 10-16.5, good tread. 

764
Telehandler Wheels and Tires
Set of 4 Telehandler wheels with mounted tires, Firestone Duraforce MH, size 370/75-28, foam filled and 14 ply rated.  known to fit JLG943 and Skytrack 8040 and may fit other machines as well.  

765
Utility Body
Monroe Customs utility body for work truck, It has 3 boxes on each side, in good solid condition.  Serial number 16-22678

766
Utility Flatbed for Truck
Utility Flatbed for work truck, Good solid bed, diamond plate floor, with lights and hitch, 

766A
Century Truck Cap
Century Truck Cap last known to fit a 2002 Chevy Silverado 2500HD that was a 4-door with a short bed.   May fit other trucks as well, has one broken window.  

767
Reversible 3-Point Rake
Reversible County Line  3-Point Rake, 72'' wide in good condition.  

768
County Line 3-Point Drag Box
County Line 3-point Drag Box that is in almost new condition.  It is 60" wide and has 5 ripper shanks.  

769
County Line 3-Point Ripper
County Line 3-Point Ripper that is quick hitch compatible.  Good condition.  

770
Bobcat Tree Spade Attachment
Bobcat Tree Spade Attachment,  36" cone style, should be a direct fit to any Bobcat Skid Loader G series and newer and may fit other models also.   It is electric over hydraulic and is in working condition.  It does need some welds repaired.   

771
3-Point Ford Flail Mower
Ford Flail Mower model 719.   It is a 6' wide 3-point attachment and is driven by a 540 PTO.  It is in working condition.  Serial number: 5228

772
3-Point Log Splitter
3-Point Log splitter that is PTO driven.  It is in working condition and will split logs up to 27" long.   

773
Driveway Finisher Grader
Driveway Finisher Grader for skid loader mount that is brand new from the factory.   It has mounts on both sides, one side is for grading and the other side for finishing.  It is 6' wide X 6' long and made from hardened steel.  The cutting edges are adjustable height and are reversible.

774
10' QT Pusher

775
10' QT Pusher

776
10' QT Pusher

777
10' QT Pusher

778
8' QT Pusher

778A
8' QT Pusher

778B
8' QT Pusher

779
8' QT Pusher

780
8' QT Pusher

781
8' QT Pusher

782
84" QT Skeleton Bucket

783
84" QT Skeleton Bucket

783A
84" QT Skeleton Bucket (no sides)

783B
84" QT Skeleton Bucket (no sides)

784
70" QT Root Rake

785
70" QT Root Rake

786
84" Light Duty Fork Extensions

787
84" Light Duty Fork Extensions

788
84" Light Duty Fork Extensions

789
84" Light Duty Fork Extensions

790
Quick Attach Skid Loader Fork Mount
Quick Attach Skid Loader Fork Mount,   Lot 791 forks do not fit.   

791
48" Forks
Set of 48'' Forks 

793
Skid Steer Attach Frame

794
Skid Steer Attach Frame

795
Skid Steer Attach Frame

796
Skid Steer Attach Frame

797
Skid Steer Attach Frame

798
Skid Steer Attach Frame

799
Skid Steer Attach Frame

800
Skid Steer Attach Frame

802
Skid Steer Plate with Guard 5/16"

803
Skid Steer Plate with Guard 5/16"

804
Skid Steer Plate with Guard 5/16"

805
Skid Steer Plate with Guard 5/16"

806
3-Point Work Platform

807
3-Point Work Platform

808
3-Point Adjustable Blade

809
Tiller For Garden Tractor

810
Pallet of Misc 3-Point Parts

811
John Deere Rotary Harrow
John Deere Rotary Harrow, 3-point lift, 14' wide.   Serial number 000591  Type E0414

812
Backhoe Bucket
Backhoe Bucket,  22'' wide, 5-tooth, Rufurbished and painted, fitment is unknown, 

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Equipment Showcase Auction
 Live Auction
 
Auction Date(s)
Thursday Dec 31, 2020 Completed
Auction Location

Middlebury, IN 46540
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions
: Cash, check, or major credit card(with 2% con. fee). 10% buyers premium applies to onsite bidders. 13% buyers premium online , 7% sales tax will be in effect , buyers are welcome to fill out a valid exemption. All items are sold without reserve. 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

.Equipment Showcase Auction
Skidloaders ~ Excavating~ Construction Equipment
At Absolute Auction!



Consign now
for FREE
advertising!
Consignments are
wanted including:
• Contractor’s Equipment
• Excavating Equipment
• Trailers
• Skidloaders
• Power Tools

John Deere
4640 Tractor
1994 Ford
F-150
Gehl DL6L-42 Telehandler Equipment Trailer
1997 GM

00
Information Lot
Onsite auction is set to start at 9 Am with Power tools with the online portion starting at 9:30. All items are pick-up only and are located at 11751 CR 12 Middlebury IN 46540. Loadout will be available on day of auction until dark, Jan. 1st & 2nd from 8 AM to 2 PM. The following week Monday to Friday 8 AM to 4 PM. After that it is by appointment only by calling Bronson at 574-210-3721 All items must be picked up within 30 days. 

199
Diecast Kenworth Semi and Knuckleboom Log Trailer
Diecast Kenworth Semi and Knuckleboom Log Trailer with logs.  

1
test

200
Honda Water Pump
Honda Water pump model 6X25 with a 4-stroke engine. It is in good running condition with new hose in box.  

201
Honda Powered Water Pump Low Hours!
Honda WB30XT water pump with a Honda GX160. It has less than 5 hours of total tunning time,  In excellent running condition.  

202
Honda Powered Water Pump Low Hours!
Honda WB20X water pump with a Honda GX20X engine, Under 2 hours of total running time.  In Excellent working condition.  

203
Honda Trash pump
Honda WB15 trash pump with a 2.2 horsepower motor in running condition. 

204
Honda Trash pump
Honda WT30X Trash Pump powered by a GX240 242cc  4-stroke gas engine, in good running condition with 3'' suction hose. 

8
Storage Trailer

205
Sand Blaster
Sand Blaster on cart with hood in good working condition. 

206
Dewalt Ready Heater
Dewalt DXH215HD ready heater, 215'000 BTU, 14 gallon fuel capacity, can run on either kerosene or diesel. It has very little use and is in almost new condition.

207
Dewalt Ready Heater
Dewalt DXH190HD ready heater,  190'000 BTU, 14 gallon fuel capacity, can run on either kerosene or diesel. It has very little use and is in almost new condition.  

208
Charge Air Pro Air Compressor
Charge Air Pro air compressor by Ingersoll-Rand.  It has a 5 horsepower 3-phase 230 volt electric motor, 80 gallon tank, 2 clyinder.  In good working condition.

209
Quincy QT-5 Air Compressor
Quincy QT-5 air compressor with approximately a 100 gallon tank and has a 3 phase 5 horse power Baldor motor, upright twin cylinder, just serviced.  Serial number 5058989

210
Ingersoll Rand Air Compressor
Ingersoll Rand air compressor with a 3 phase 10 horsepower motor. It is a twin cylinder and has a 120 gallon tank, 230 volt and can be wired for 480,  just serviced,   Serial number  0809150058

211
Dewalt Air Compressor Low Hours
Dewalt  Airt Compressor powered by a Honda GX160 gas engine, dual tanks, 8 gallon capacity, just serviced and runs good, very low hours, 

212
Craftsman Radial Arm Saw
Craftsman 10'' Radial Arm Saw in almost new condition only used a handful of times.  

213
Rigid Pipe Bender/Threader
Manual Rigid pipe bender and threader with dies,  Model 450

214
Panel Saw
Panel Saw with Rockwell saw, extra blades included, in good working condition.  

215
Echo TC-2100 Cultivator
Echo TC-2100 Cultivator powered by a 2-stroke engine, it has a 9'' wide cut in running condition. 

216
Ariens Snow Blower
Ariens Snow Blower, 5 horse power with a 22'' cut, 2-stroke gas engine, single stage, in running condition, Serial number 938017

217
Ariens Path Pro Snow Blower
Ariens Path Pro Snow Blower, 136cc 4-stroke gas engine, 21'' cut, single stage chute, recoil start, in good running condition, 

218
Ariens Path Pro Snow Blower
Ariens Path Pro Snow Blower, 136cc 4-stroke gas engine, 21'' cut, single stage chute, recoil start, in good running condition,

219
Mainline Garden Tractor with Quick Hitch
6 LD 400 Lombardini diesel engine, differential drive, 4 speed forward 1 speed reverse, electric start, includes 2 adjustable tiller boxes 18"-30", small set of wheels, 2 way log splitter, 54" sickle mower and a dump trailer, everything works like it should 

220
Log Splitter
MTD Log Splitter with a ram force of up to 25 tons.  It is powered by a Briggs and Stratton 8 horsepower engine.  

221
Miller Big Blue 250D Welder
Miller Big Blue 250D diesel powered welder.  It is powered by a Duetz diesel engine that puts out 20 Kw, it has 4917 hours, it is on a trailer, comes with leads and cables, has electric start, sells with bill of sale.   In good working condition.  

222
Allen Vibrating Concrete Screed
Allen Vibrating Concrete Screed Model 12.  It is air driven, approximately 45' long, in good working condition.  

223
Herkules K-900 Portable Auto Lift
Herkules K-900 Portable Auto Lift. Drive on lift with 6'000 lb capacity, Air operated with airbags underneath, Lifts 30'' from the ground, in good working condition, comes with manual.

224
Retaining Wall Blocks
Retaining Wall blocks, measures 40'' high, 46'' wide, and 72'' long.  Weight is approximately 3'000 lbs each, 11 pieces total, some do have cracks, decorative design on the front side, 

225
Lockers
3 sets of lockers with 3 lockers in each set.   Each section is 36'' wide and 15'' deep and they stand 77'' high.  The each have hooks and a shelf and are pad lock ready.  

226
Portable Board Edger
Portable Board Edger with return, 4'' X 32'' capacity, It has 1 blower mounted that is 24'', also has hydraulic controls and has new blades.    

227
E-Z Chop Slab Saw
E-Z chop Slab Saw, all manual with 20'' X 8 1/2' in feed. 

31
John Deere 544-B Wheel Loader
John Deere 544-B Wheel Loader with forks and bucket and currently has 5'800 hours, It has a straight 6 cylinder diesel engine, 4-wheel drive, full cab with heat, windows do open and the tires are bald.  

228
Belt Conveyor
16'' X 6' belt conveyor, hydraulic drive. 

229
Gear Box
Right angle gear box.

230
Transfer Deck
3-strand transfer deck, 5' wide X 12' long, hydraulic drive, 

231
Belt Conveyor
20'' wide X 14' long belt conveyor, hydraulic drive. 

232
Hydraulic Pump Station
Hydraulic Pump Station, with 2 vane type pumps mounted on jack shaft.  1 Hydraulic motor with vickers relief valves. 

233
Baker Incline Conveyor
Baker Incline Conveyor,  14' long, 28'' wide, electric drive, 3 phase

234
Conquest Reversing Auger
Conquest Reversing Auger, 12' long and 12'' wide, 2 HP electric Baldor Motor. 

235
Military Notcher
Military Notcher,  1'' dado, 5 hp electric motor, 3-phase, 10' long, 6'' wide roller conveyor. 

236
Brettrager Bolt Mill
Brettrager Bolt Mill, holds up to a 84'' log, 36'' inserted tooth blade, hydraulic drive table,  It has a 40 hp 3-phase electric motor and is in working condition.  

237
Hannah/West Plains Scrag Mill
Hannah (West Plains) Scrag Mill with dual 36'' inserted tooth blades,  adjustable width, dual 50 hp electric motors.  

238
Snow Bucket Repair Station
Snow Bucket Repair Station, It is fully hydraulic to lift and rotate various sizes of snow buckets for repair and extends and retracts to accommodate different widths of buckets and snow pushers.  It was in working condition when last used. 

239
7Y Box style Debris Box

239A
3 YWC Trash Hopper
3 YWC Trash Hopper with skid loader attachment

240
2 YWC Trash Hopper
2 YWC Trash Hopper with fork pockets, self dumping

241
2 YWC Trash Hopper
2 YWC Trash Hopper with fork pockets, self dumping 

242
SMLDW 2.0
SMLDW 2.0  hopper set up for skid loader quick attach

243
SMLDW 2.0
SMLDW 2.0 hopper set up for skid loader quick attach 

244
Cattle Feeder
Cattle Feeder Blue

245
Cattle Feeder
Cattle Feeder Blue

246
Cattle Feeder
Cattle Feeder Blue

247
Cattle Feeder
Cattle Feeder Blue

248
Cattle Feeder
Cattle Feeder Blue

249
Cattle Feeder
Cattle Feeder Blue

250
Cattle Feeder
Cattle Feeder Blue

56
Case SR200 Skid Loader
2016 Case SR200 Skid Loader powered by a 4 cylinder turbo charged diesel engine rated at 74 horse power and only 1642 hours.  It has a full cab with heat and air conditioning, auxiliary hydraulics, quick attach, radio, lift capacity of 2'000 lbs, It has been recently serviced and everything works as it should.   Does not sell with attachments, Product ID number JAT-SR200CGM414449    

251
Cattle Feeder
Cattle Feeder Blue

252
Cattle Feeder
Cattle Feeder Blue

253
Cattle Feeder
Cattle Feeder Blue

254
Cattle Feeder
Cattle Feeder Blue

255
Cattle Feeder
Cattle Feeder Blue

256
Cattle Feeder
Cattle Feeder Blue

257
Cattle Feeder
Cattle Feeder Blue

258
Cattle Feeder
Cattle Feeder Orange

259
Cattle Feeder
Cattle Feeder Orange

260
Cattle Feeder
Cattle Feeder Orange

261
Cattle Feeder
Cattle Feeder Orange

264

262
Cattle Feeder
Cattle Feeder Orange

263
Cattle Feeder
Cattle Feeder Orange

265
3/8" AR500 Steel Deer Shooting Target with Heart Flapper

266
3/8" AR500 Steel Coyote Shooting Target with Heart Flapper

267
3/8" AR500 Steel Wild Boar Shooting Target with Heart Flapper

268
AR 500 Steel Dueling Tree for .22 Caliber

269
AR 500 Steel Dueling Tree for .22 Caliber

270
AR 500 Steel Dueling Tree for .22 Caliber

271
AR 500 Steel Dueling Tree for .22 Caliber

272
AR 500 Steel Dueling Tree Shooting Target 3/8"

273
AR 500 Steel Dueling Tree Shooting Target 3/8"

274
AR 500 Steel Dueling Tree Shooting Target 3/8"

275
AR 500 Steel Dueling Tree Shooting Target 3/8"

276
29" X 90" Steel Work Bench

277
29" X 90" Steel Work Bench

278
29" X 90" Steel Work Bench

279
29" X 90" Steel Work Bench

280
29" X 90" Steel Work Bench

281
29" X 90" Steel Work Bench

281A
29" X 60" Work Bench

281B
29" X 60" Work Bench

281C
29" X 60" Work Bench

281D
29" X 60" Work Bench

281E
29" X 60" Work Bench

281F
30" X 57" Small Table 5/16" Black

282
30" X 57" Small Table 5/16" Black

283
30" X 57" Small Table 5/16" Black

284
30" X 57" Small Table 5/16" Black

285
30" X 57" Small Table 5/16" Black

287
30" X 57" Small Table 5/16" Black

286
30" X 57" Small Table 5/16" Black

288
5/8" Steel Plate / Road Plate
5/8" Steel Plate / Road Plate  3 pieces  60" X 120"

289
1/4" Steel Plate / Road Plate
1/4" Steel Plate / Road Plate 6 pieces  73"X 123"

290
1/4" Steel Plate / Road Plate
1/4" Steel Plate / Road Plate 6 pieces 73"X 123"

290A
1/4" Steel Plate / Road Plate
1/4" Steel Plate / Road Plate 6 pieces 73"X 123"

291
Brine Tank 1'000 Gallon
Brine Tank 1'000 gallon with lid

292
Brine Tank 1'000 Gallon
Brine Tank 1'000 gallon with lid

293
Brine Tank 1'000 Gallon
Brine Tank 1'000 gallon with lid

294
Brine Tank 300 Gallon
Brine Tank 300 gallon with lid

295
100' Belt Conveyor
100' Belt Conveyor with 10' sections.  Belt is 24'' wide and comes with electric drive 3HP 3-phase Baldor Electric Motor. 

296
Oliver Edger
Oliver Edger with up to 9" opening plus infeed, 16" inserted tooth blades, one of which is moveable and one is moveable. 25HP 3-phase motor.  

297
Morbark Chipper
Morbark Chipper, 48", 6 knife, side feed, top discharge, with infeed, good unit.  

298
30" Dust Blower
30" Dust blower in good condition, hydraulic drive. 

299
Shipping Container
8' X 20' Shipping Container. It is 8 1/2' high, has double rear doors and weighs approximately 5'000 lbs.  It could also be useful for storage.

300
Shipping Container
8' X 20' Shipping Container. It is 8 1/2' high, has double rear doors and weighs approximately 5'000 lbs. It could also be useful for storage.

301
Ingersoll Rand Air Compressor
Ingersoll Rand T30 air compressor.  It has a 120 gallon capacity air tank, twin cast iron cylinders, 3-phase 10 horsepower electric motor.  It is in good working condition.  

302
Torch set
Oxy-Acetylene torch set that is on a cart and includes the torch, hoses and gauges.   

303
Torch set
Oxy-Acetylene torch set that includes tanks, hoses, torch and gauges.  No cart.  

304
Cantek Wide Belt Sander
37" single head, hydraulic and air controlled, needs some repairs, made in Canada

305
Zenith Scissor Lift/Pallet Jack*
Serial # ZMSL-31831, 2200 lb. lift, 32" max height

306
MTD Snow Blower
MTD Snow Blower that makes a 28'' cut and powered by a 277cc 4-stroke engine and has electric start with recoil back up.   It has 6 forward speed and 2 reverse.  It is in good running condition.   

310
6' Werner Aluminum Step Ladder

311
8' Keller Fiberglass Step Ladder

312
Otter Sport Kayak
Otter Sport Kayak that comes with paddle and life vest. 

313
Cub Cadet RT65 Tiller
Cub Cadet RT65 Tiller with a Honda GC190 engine with dual directional tines.  In good condition.  

314
Predator 4000 Generator
Predator 4000 Generator.   3'200 running watts with 4'000 watt peak.  212cc predator engine in good condition.  

315
Workbench with Vice

316
Rockwell Table Saw
Rockwell 10" Table Saw in good condition.

317
Skil Saw Chop Saw
Skil Saw Chop Saw in good condition

318
Lawn Roller 38"
38" plastic lawn roller in condition 

319
6 Gallon Air Compressor
6 Gallon Air Compressor, single phase, 120 volt, comes with new Senco 1/4'' 50' air hose.  

320
Portable Meadows Saw Mill
Portable Meadows Saw Mill that does have air dogs and manual set works, It does need some repair and belts.  

321
Sullair Air Compressor
Sullair Air Compressor,  185 CFM, 4 cylinder GM gas engine, 1252 hours,  pintle hitch, in good running condition.  Serial Number 810-410

322
Dayton Ready Heater
Dayton Ready Heater, kerosene or diesel power, 210'000 BTU.   In good working condition.  

323
Ingersoll Rand Compressor Cylinders
Ingersoll Rand Compressor Cylinders, 2 cylinder, model 2475, SN 30TC940505

324
Honda GX160 Engine
Honda GX160 engine, V-twin, 18 HP, side shaft and electric start, recently serviced and in working condition.  

325
Husqvarna Chain Saw
Husqvarna Chain Saw  345, 15" bar, 2-stroke engine, has a brake issue, running condition,   

326
Organizers and File Cabinet
Organizers and File cabinet all in one lot 

327
John Deere Lawn Sweep
John Deere Lawn Sweep in good operating condition.   

328
JET Metal Band Saw
Jet Metal Band Saw.   Electric drive, 3/4 hp, in working condition.  

329
Delta Rockwell Drill Press
Delta Rockwell Drill Press,  1/3 hp electric motor, in working condition.

330
Bench Grider
Bench Grinder / Chain Sharpener.   

331
Billy Goat Leaf Vac
Billy Goat Leaf Vac with a 5 HP Briggs and Stratton engine, Just serviced this year but has not been used since.    

332
2 New Cupolas
2 New Cupolas for your next building project.  new and not used 

333
9 Boxes of Cedar Shake Siding, New
9 Boxes of Cedar Shake Siding.  Autumn Red color, siding is New.  

334
Work Light
Very bright work light in good condition. 

335
Scaffolding Pieces
6 pieces of scaffolding, good condition. 

336
Oil Tank With Hose
Oil Tank with hose on retractable reel, Tank has approximately 10-15 gallons of 15W-40

337
Grease Hose
Grease hose on retractable reel. 

338
Steel Workbench and Contents
Steel Workbench and Contents 

515A

339
Box of Misc Wrenches
Box of Misc wrenches, various sizes and brands

340
2 boxes of sockets
2 boxes of sockets, various sizes and brands 

341
1" Drive Socket Set
1" Drive socket set, various sizes

342
FMC Rivet Press
FMC Air Powered Rivet Press,   120-160 psi, model B-85  Serial number 2312

343
Crate of Organizers
Crate of Organizers with misc parts, pieces and fittings, 

344
Bench Vice
Bench Vice with 6" Jaw.

345
Large Prentice Vice
Large Vice by Prentice Vice Company,   No,. 56

346
Pallet of Belts
Pallet of MIsc belts, various sizes, brands and sizes, 

347
DR Power Equipment Electric Log Splitter
DR Power Equipment Electric Log Splitter model K22.  1/2 HP single phase Farm Duty electric motor.    In working condition.  

500
2016 Bobcat T-630 Skid Steer
2016 Bobcat T-630 tracked skid steer.   It has a Bobcat Engine rated at 74 horse power, 2-speed, auxiliary hydraulics, hand and foot controls, power quick attach, suspension seat, 78'' bucket, 3'450 hours, Deluxe panel, lift capacity of 2'100 lbs, tracks are at about 60%.  It has a fresh tune and service with a new battery and starter.  Product ID number: AJDT13366

500A
2008 Bobcat T-320
2008 Bobcat T-320 with 3'451 hours.  It is powered by a Kubota diesel engine rated at 92 horse power.   It has a 84'' bucket, auxiliary hydraulics, full cab with heat and air conditioning (needs a door), hand controls that are either in H or ISO pattern, a lift capacity of 3'200 lbs, quick attach, code start, operating weight is 9'702 lbs, fuel gauge does not work, hand controls need work. Serial Number A7MP60507

500B
CAT 299C Skid Loader
CAT 299C skid loader with 6'619 hours.   It has a CAT 2236 Turbo charged diesel engine rated at 94 horsepower.  It is a 2-speed and has high flow auxiliary hydraulics, ISO hand controls, full cab with heat and air conditioning, suspension seat, 78" bucket, power attach, a lift capacity of 4'150 lbs, tracks are about 80%, Everything works.   Serial Number CAT0299CJJSP00412

500C
Bobcat T-180 Skid Loader
Bobcat T-180 Skid Loader.  It is powered by a Kubota 4-cylinder turbo charged engine rated at 61 horsepower and has 3'731 hours.   It comes with a 68" bucket, qucik attach, auxiliary hydraulics, hand and foot controls, a lift capacity of 1'800 lbs, machine weight is 7'367 lbs, it does have heat but the glass and door is missing, tracks are under 25%.  Everything works.   Serial Number: A3LL37408

500D
Bobcat T-190 Skid Loader
Bobcat T-190 Skid Loader with 5400 hours that is powered by a Kubota V2003T turbo diesel engine that is rated at 61 horsepower.  It had a complete engine overhaul at 5'317 hours and has a new cylinder head at that time also.  It has a 63'' bucket, auxiliary hydraulics, a 1'900 lb lift capacity, full cab with heat , hand and foot controls, power attach, new drive belt, weighs 7'612 lbs, tracks in good condition.   The left side drive does leak oil.   Serial number: 519311477                                              

500E
CAT 277 Skid Loader
CAT 277 Skid Loader Powered by a turbo diesel engine rated at 94 hp.  It comes with a 80'' bucket and has a lift capacity of 3'200 lbs.  It is joy stick controlled, has a full cab (needs door), new rollers in 2018, auxiliary hydraulics, quick attach, tracks under 25%, hour meter has been changed (see picture). fuel gauge not working, new left side drive motor, last serviced in November of 2020.   Serial Number :  CATbb277jcncb1682

501
John Deere 325 Skid Loader
2006 John Deere 325 Skid Loader.  Powered by a turbo charged diesel engine and has a lift capacity of 2500 lbs. It has additional weights in rear, full cab with heat and air conditioning, quick attach, sells with 72'' bucket, hand and foot controls, 2-speed, auxiliary hydraulics and has 3050 hours.    *** NOTE   Tracks that are on the machine do not sell with but are going to be available seperatly.

502
New Holland LS216 Skid Loader
New Holland LS216 Skid Loader with a 60 horse power turbo charged diesel engine and has 3'425 hours.  It has a lift capacity of 1'600 pounds, hand and foot controls, full cab (needs front door), 60'' bucket, heat, power attach, newer tires, auxiliary hydraulics, suspension seat, new battery.    Product ID Number: JAFOL216CDM477968

502A
Gehl 5640 Turbo Skid Loader
Gehl 5640 Turbo Skid Loader with 8'226 hours.   It is powered by a Duetz diesel engine rated at 82 HP. and has a lift capacity of 2'200 lbs.  It has a full cab (door missing) hand controls, sells with 67'' bucket, steel tracks are included, tires are at about 75%,  everything works, left lift cylinder could use a new seal,   Serial Number GHL05640E00508183

503
ASV MD2800 Track Skid Steer
ASV MD2800 Track Skid Steer with an 70 horse power Isuzu diesel engine. It has lift capacity of 2'100 lbs, 3'072 hours, high flow hydraulics,posi-track, hand controls, new seat, 72'' bucket, quick atatch, serviced 10 hours ago, undercarriage is about 75%, tracks are 18'' wide, everything works and is in good condition,   Serial Number 0073-00WTD

503A
Bobcat 753 Skid Loader
2003 Bobcat 753 skid loader with 5'649 hours.  It has a 2.2 liter Kubota diesel engine that makes 43 horsepower.  It has a lift capacity of 1'300 lbs, comes with a 60'' bucket, has a full cab with heat, auxiliary hydraulics, weighs 4'740 lbs.  The tires are at about 25%, has had the same owner the last 15 years.   Serial Number 515839684

504
Bobcat 853H Skid Loader
Bobcat 853H wheel skid loader with an Isuzu diesel engine rated at 58 horsepower with 4047 hours.  It has a full cab with heat, hand and foot controls, 78'' bucket, auxiliary hydraulics, lift capacity of 1'700 lbs, everything works, tires are at about 20%.   Product ID number 51281166. 

505
Bobcat 553 Skid Loader
Bobcat 553 Skid Loader with 2'790 hours.  It is powered by a Kubota diesel engine and has a lift capacity of about 950lbs, It wil have New Tires by auction time, does not come with attachments, Engine is rated at apporximately 35 hp.  Serial Number 516312071

505A
Hydra Mac 12C Skid Loader
Hydra Mac 12C Skid Loader.  It has a 4-cylinder Chrysler gas engine rated at 20-30 horse power, and has a lift capacity of around 1'300 lbs,  It sells with a 66'' bucket, pallet forks and a bale spear.  The hour meter shows 2'537 hours but it is unknown if that is correct,  It has a new Weber carb this year and it does run and opperate.   Serial Number 33233

506
CAT MT965B Tractor
CAT MT965B Tractor that features a 510 horsepower 18.1 liter 6 cylinder turbo diesel CAT 2236 engine.  The power shift transmission has 16 forward gears and 4 reverse. Max speed of 24 mph, 4 remote control valves, 390 gallon fuel capacity, 60'000 operating weight,  the left rear tire needs to be repaired but does hold air for a few days and batteries will need to be replaced.  Tractor shows 18'821 service hours ,   Serial number AGCC0965JNTTF1107

507
1974 Massey Ferguson 1135
1974 Massey Ferguson 1135 with only 2'690 original hours.  It is powered by a 5.8 liter 6 cylinder turbocharged diesel engine that puts out 134 horse power and is backed by a multi speed power shift transmission.  It has a PTO, drawbar, 3-point hitch and newer paint.  The 3-point does need some valve work but other than that the tractor is in excellent working order.   Serial Number 9B45257

508
New Holland Tractor with Ford Front End Loader
Model 3415 with under 700 hrs! 44 HP, live PTO (38 HP) 2WD, 3-point hitch, sells with bucket, this tractor was well maintained and is in good working condition. 

508A
John Deere 4640 Tractor
1979 John Deere 4640 Tractor with 8'853 hours.   It is powered by a 7.6 liter 6-cylinder turbo charged diesel engine that makes 185 horsepower and is backed by a 8-speed full power shift transmission that has 8 forward and 4 reverse gears.  It has a 3-point hitch, PTO rated at 155 hp, draw bar, full cab with heat.  The 3-point hitch does go up and down but not to full height, that cab does not have a radio and there are signs of heavy wear (see pictures).  The alternator is not working but does if you jump it. Just out of the shop see invoice in pictures.  Serial Number 4640P009952R 

509
Kubota M4500DT Tractor
Kubota M4500DT Tractor with 6' bucket.  It has a 55 horse power 6 cylinder diesel engine with a 8-speed transmission and 2 speed reverse.  It is a 4-wheel drive and has 1928 hours. It also has a draw bar, 3-point hitch, pto, rear hydraulics.  The front loader bucket extends to 10' high and everything works as it should and was last serviced at 1840 hours.   Serial number  103269   Engine model number S2600-A

510
Kubota B2710 Tractor
Kubota B2710 compact utility tractor with 820 hours and in good running condition.  It is powered by a 1.3 liter in line 4 cylinder diesel 27 horsepower engine with a hydrostatic transmission. It has 4 wheel drive, a 52'' loader bucket, power steering, 3 point hitch and a PTO. 

511
Kubota BX1500 Tractor
Kubota BX1500 sub compact utility tractor  powered by a 15 horsepower .6 liter diesel engine with a hydrostatic transmission. It has 4 wheel drive, turf tires, a 48'' loader bucket, mower deck, power steering, 3 point hitch, draw bar and a PTO. 1285 hours.  

512
Tractor King JM-254
Tractor King JM-254 with a 1.5 liter 3-cylinder diesel engine and a 12 speed transmission that has 4 reverse gears and is 4-wheel drive.  It does have a 2 post open ROPS with a roof, 3-point hitch, draw bar, live 540/1000 pto and weighs 2'514 lbs.   Serial Number: 05121000412

512A
John Deere Model A
1946 John Deere Model A with a 5.1 liter 2 cylinder gas engine rated at 26 horse power, 4 speed transmission with reverse, 540 PTO, draw bar.  It does run and drive. 

513
Minneapolis-Moline Tractor
Minneapolis-Moline Tractor   Model 4 1/4 X 5,  Serial number 01914011.   It does run and operate, has row crop front end, 4 cylinder engine, rear draw bar, pto, rear hydraulics,.  

514
Cub Cadet Lawn Tractor with Snow Blower
Cub Cadet Lawn Tractor with Snow blower and cab.  It has a 20 horse power Kohler V-twin engine and hydrostatic transmission. It has a 42'' 2 stage snow blower that is direct drive.  The rear wheels are weighted and does come with tire chains.  It runs well and has 952 hours. 

514A
Cub Cadet Lawn Tractor
Cub Cadet Lawn Tractor, that has 479 hours, 624cc Kohler engine, 48'' deck.  It does run and drive, mower deck does not engage.   

514B
Simplicity Lawn Tractor
Simplicity Lawn Tractor, It has 649 hours, 44" mower deck, hydrostatic transmission, Briggs and Stratton 22 HP 646cc engine, runs and drives

514C
Simplicity Lawn Tractor
Simplicity Lawn Tractor in excellent running condition.  It has 243 hours, 724cc  23 HP Briggs and Stratton engine, 50" mower deck, hydrostatic transmission.  

514D
Simplicity Lawn Tractor
Simplicity Lawn tractor with a 17 hp Kohler engine and hydrostatic transmission.  The mower deck is 48'' wide, snow blower attachment is 42" wide and comes with a leaf vac and cab encloser for use when blowing snow. everything works as it should.  

515
Gehl DL6L-42 Telehandler
Gehl DL6L-42 Telehandler with 5200 hours.  It has a 42' reach, 4-wheel drive, 4-wheel steering, foam filled tires, full tilt, turbo diesel 115 horse power engine, 4-speed transmission, lift capacity of 7'000 lbs and has a new seat.   This machine works and operates as it should.  

516
Gradall Telehandler 534C
Gradall 534C Telehandler It has a lift height of 36' and a reach of 23' and lift capacity of 6'000 lbs, 4-wheel drive, rear wheel steering, hydrostatic drive, hours are unknown, 4 cylinder Cummins diesel engine rated at 76 horsepower , carriage tilt, operating weight with carriage and forks is 17'830 lbs.   Serial number 0288793

516A
Sanderson Telehandler
Sanderson Telehandler model 11-30.  It has a reach of 36' and weight capacity of 6'000 lbs.  It can be switched from 2 or 4-wheel drive and the steering can be front,rear or crab style steering.  It is powered by a Ford 4-cylinder diesel engine and has a 4-speed transmission and shows 5'538 hours. The frame does tilt, has a new hydraulic pump, does have a few minor leaks and the front left wheel has a oil leak also.   The tires are at about 50%.   

517
Dyna SC15 Firewood Processor
2018 DYNA SC15 firewood processor, 34 hp CAT diesel, just under 900 hrs, 14 foot conveyor, this machine has been refurbished by the factory with some 2019 updates. It has a 4 way splitter wedge, it is fully updated and loaded, ready to work. This machine has always been owned by DYNA RENTALS, it was used as a rental unit, maintained to DYNA specs and is ready to generate revenue for you!  

518
Dyna Model SC16 extended frame Firewood Processor
New in 2011, only 2200 hrs. powered by a John Deere diesel, new control panel just over 200 hrs. ago. Good Operating Condition, NICE MACHINE!

519
Case 621B Wheel Loader
Case 621b Wheel Loader.  Hour meter shows 1619 hours but it is believed to have rolled over with actual hours being 11'619.   It is powered by a 6T-590 turbo diesel engine rated at 128 horse power, transmission has 4 forward and 3 reverse gears, 8' bucket with a heaped capacity of 2.23 yards,weight is 27'250 lbs,  full cab has heat, in good working condition.  Product ID Number:  JEE0039905

520
Case W18 Wheel Loader
Case W18 Wheel Loader that does have a bad engine.  It comes with an 8' quick attatch tooth bucket, hours are unknown, some cylinders have been repacked and has air brakes.  

521
Bobcat 430 Mini Excavator
Bobcat 430 Mini Excavator with 2494 hours,  It does have a full cab with heat and air conditioning, It is powered by a 4 cylinder 42 horse power diesel engine.  It has a reach of over 16' a dig depth of 10' a operating weight if just over 8'000 lbs, rubber tracks, a 24'' 5 tooth bucket with thumb, a 70'' blade, runs and operates as it should.  

521A
1996 Samsung SE 210 LC-2 Excavator
1996 Samsung SE 210 LC-2 Excavator with 5'984 hours.  It is powered by a Cummins Diesel engine rated at 136 horsepower model number 6BTA5.9L  It has 32" wide tracks with a good under carriage (see pictures), A 4' wide 5-tooth bucket with stationary thumb, a full cab with heat.  Weighs in at 43'500 lbs.   Everything works except for the fuel gauge.  Serial Number FBY1892

522
John Deere 690C Excavator
John Deere 690C Excavator with 5'234 hours, It does run and operate as it should, undercarriage is at 75%, it can reach 30' across the ground, powered by an inline 6-cylinder turbo charged 6-466T engine rated at 134 horse power, operating weight is 39'935 lbs, tracks measure approximately 9 1/2' outside width,  does not have front window. 

523
Case 580 Super L Backhoe Loader
Case 580 Super L Backhoe Loader with 4'784 hours.  The backhoe has a dig depth of 14'5'', reach from swivel is 18'1'', dig force is 13'126 lbs, reach height is 8'9'' from swivel.  The loader bucket is 82'' wide with a lift capacity of 6'182 lbs and has a clearance of 8'1''.  It is powered by a Case 4T-390 turbo charged diesel engine that puts out 91 horsepower and is backed by a 4 speed transmission with reverse. Operating weight is approximately 13'000 lbs.   Does need some windows.   Product ID Number: JJG0268126

523A
Mitsubishi LD350 Crawler Dumper
Mitsubishi LD350 Crawler Dumper, In running condition, needs some break work, hours are unknown, undercarriage is in good condition,

524
Timberjack 360 Grapple Skidder
Timberjack 360 Grapple Skidder in excellent working condition.  Powered by an inline 6 cylinder diesel engine,  Currently showing 10'738 hours and had a rebuild about 300 hours ago. The cab has heat, stereo, cb radio, newer tires,   Everything works as it should.  Serial number 10EB1161

525
John Deere 440B Skidder
JD 440B Skidder, meter reads 5280 hrs. good strong winch & cable w- 3 chokers. Power shift, NEW TIRES in rear, front tires @ 50% (front tires do have a little dry rot) runs and operates very good. Appears to have a strong transmission. Rebuild motor approx.. 500 hrs. ago. A little oil underneath but no major leaks. Overall good condition. Woods ready.  

526
Clark Forklift
Clark Forklift model C40B.  It has a 2 stage mast, 4'000 lb lift capacity, 42'' forks, new battery and is LP powered.  It does run but does have a crack in the head and will need new tires.   Serial Number 1809-893-868

526A
Crown Electric Lift
Crown Electric Lift with 504 hours.   It has a lift capacity of 2'000 lbs and weighs 1'410 lbs. It has 4 batteries and holds a charge well.   Model 20MT  Serial number 1A115776

527
Case 310F bull dozer
1964 Case 310F bull dozer, It has a 4 cylinder gas engine, 7'4'' mechanical 4-way blade with hydraulic lift, PTO, 14'' wide tracks, under carriage has good sprockets and pins.   Serial number 3021457  sells with manuals. 

527A
Caterpillar D-4 Dozer
Caterpillar D-4 Dozer with 78'' 4-way blade.  It has a 4 cylinder CAT diesel engine and it is in good working condition. The pony motor is not currently working, hour meter shows 4'950 hours, has newer battery, undercarriage is at or above 75%.  Serial Number 6U4423

528
Genie Z-60/34 Boom Lift
2000 Genie Z-60/34 articulating boom lift.   It has 3'788 hours as of 12-1-20.  It is powered by a 75 horse power Ford 4 cylinder engine that runs on gasoline or LP, features dual controls, 4-wheel drive, air filled tires,  66' working height, 36' reach, 500lb lifting capacity, 27' up and over clearance, 6' jib, 12 volt auxiliary power, 22'000 unladen weight,  It does have a small oil leak.   Serial number 2204.  

529
2002 Genie S-60 Boom Lift
2002 Genie S-60 boom  lift with 8'705 hours. It has a maximum lift height of 60', a horizontal reach of 50', platform weight rating of 500lbs, the platform rotates 160 degrees, unladen weight is 26'700 lbs, It has good tires, it is 4-wheel drive, It has a Perkins diesel engine and has been well maintained.  Serial Number: S60-8239

530
2000 Genie S-60 Boom Lift
2000 Genie S-60 boom lift with 9'745 hours. It has a maximum lift height of 60', a horizontal reach of 50', platform weight rating of 500lbs, the platform rotates 160 degrees, unladen weight is 26'060 lbs, It has good tires, it is 4-wheel drive, It has a Duetz diesel engine and has been well maintained. Serial Number: S60-6020

530A
MEC Scissor Lift
MEC Scissor lift that is 46" wide and is 12' long while extended.   It has a lift capacity of 1'000 lbs with 300 lb maximum on extension.   It lifts 19' to the top of the cage, has fork pockets and the battery charger is new.  The batteries do need to be replaced. 

531
K-TEC 3100 Scraper Pan
K-TEC 3100 Scraper Pan that has been recently repainted and has new front hydraulic hoses and is in good working condition. Tires are at 20%.  Heaped Capacity (ISO Rated): 28 Cubic Yards Struck Capacity: 18.5 Cubic Yards Max Loading Rating: 68,000 lbs Bucket Dimensions: 12'W x 4'H x 10'6"L Cutting Width: 12' Cutting Edge: 3-Piece Blade Gate Opening: 78" Rack Height (Tiltable): 3' Gate Cylinders: 4.5" x 28" Lift Cylinders: 5.5" x 31" Ejector Cylinder: 5" x 76"

531A
Barreto Stump Grinder
30sg, ser# sg0887, Track Machine, 26.5 hp Kohler Engine, Hydraulic direct drive, 19.25 " cutting wheel, only 428 hrs, 1700 lbs frame, Joy stick controlled head, Fits through a 36" gate, 14" cutting depth, , very good condition!

532
Ditch Witch 5110
Ditch Witch 5110DD with a Duetz diesel engine and a 4 speed manual transmission and has 1'656 hours. It has a 5' arm, approximately 20 hours on new chain, 18'' 4 tooth bucket, 6' blade, 3' plow, auger, outriggers, 4-wheel drive.  It is in good running condition, will need wheel bearings.  Serial number 5K0019

532A
Ray-Go Compactor Roller
Ray-Go Compactor Roller made by Rustler,  It has a 7' wide roller, powered by a Detroit Diesel engine,  It ran when parked 7 years ago and appears to be complete.  hours are unknown,  Serial number: 09B0239

532B
Vermeer Trencher
Vermeer V-3550A Trencher with a Duetz diesel engine and hydrostatic transmission and has 2'735 hours.  It comes with a 4-way 4 1/2' back fill blade, 5' trenching arm that cuts about 3' deep, chain is 3 yrs old, good auger, 4-wheel drive,  It has a few small leaks but runs and operates as it should,  joy stick needs a fitting, Serial Number : 1VRSO72P6V1000114

533
2000 Mack Dump Truck
2000 Mack RD688S dump truck,  It has a E7-350EUP engine backed by a 10-speed Eaton Fuller transmission and is rated at 350 horsepower. It has 501'310 miles and 17'107 hours.  It has a 13' dump bed, aluminum front wheels, decent tires, hitch, new batteries.  It will need rear suspension bushings in the near future.  VIN: 1M2P267Y1YM050896

534
1979 International Dump Truck
1979 International Dump Truck model 2554, Runs and drives, DT466 engine with 4'000 miles on rebuild, 8-speed manual transmission, bed works as it should, new batteries this year, builds and holds air, 304'000 miles on truck, rear tires are cracked,   VIN: CA255JHA28032

535
1997 Chevy S-10 Low Miles
1997 Chevy S-10 pick up truck with only 59'150 miles, It is a standard cab with 2-wheel drive and is powered by a Vortec V-6 engine and backed by an automatic transmission.  It has a 6' bed with a tonneau cover, manual windows and locks.  This truck is very clean inside and out and is rust free.  VIN 1GCCS14X0VK179835

536
2008 GMC C4500 Service Truck 4x4
2008 GMC C4500 Service truck with 4-wheel drive with 218'334 miles.  It is powered by a 6.6 liter Duramax diesel engine and backed by an Allison transmission. It has Reading service body that is set up for an on board welder or air compressor. Truck is in good working condition. VIN: 1GDE4C3978F410353

537
Volvo A25 Water Truck
Volvo A25 Water Truck machine type 5350 with 34'904 miles, 4685 hours and a 4'000 gallon water tank.  Works as it should.   Manufacter number 04749. 

537A
2000 Volvo Boom Truck
2000 Volvo Boom Truck with only 68'246 miles and 4'575 hours of total engine time.   It is powered by a Cummins diesel engine and backed by a 8-speed Eaton Fuller Transmission. It has Hiab Crane mounted that can be side controlled or by remote control.  The remote also has an additional battery and charger in the cab.  It also has outriggers, currently fitted with a drywall cradle, tag axle, air brakes, Good running truck that starts right up.  Tires are 25-75%.   GVWR 77'020 lbs.  VIN: 4V5JC2UF9YN870155

537B
1999 International 4900 Boom Truck
1999 International Boom Truck.   It has a Eaton Fuller 8-speed transmission and a HIAB 235K crane that goes 39' and comes with a drywall cradle.  It currently has 218'782 miles and was DOT inspected on December 11th of this year and has new steer and drive tires.   This truck made its last delivery on December 30th and everything on the truck is in working order except for the air conditioner.   VIN: 1HTSHADR3XH610814  

538
2000 Ford E-350 15 Passenger Van
2000 Ford E-350 15 Passenger Van.  It has a 5.4 liter Triton V-8 engine with an automatic transmission, 158'148 miles,  1-ton chassis and suspension, ducted heat and air conditioning, aftermarket stereo.  The brake light is on but they operate as they should, check engine light on, uses 1 quart of oil every 1'000 miles or so, transmission seal leaks.   VIN: 1FBSS31L3YH830479

539
2005 International 4200 Box Truck
2005 International Box Truck with 163'181 miles, It has a VT365 engine and an Eaton Fuller 6-speed manual transmission, Box is 24' long and total height is 13'1'', swinging rear doors, aluminum ramp, box is dry inside, air brakes, GVWR 25'500 lbs, VIN: 1HTMPAFL35H131648  *** NOTE***   The truck was in running condition when it was parked, now the starter spins and it is assumed it needs rebuilt or replaced, was towed to auction facility, the drive shaft was removed and air brakes are caged for transport.

540
2001 Freightliner FL70 Flatbed
2001 Freightliner FL70 Flatbed with a CAT 3126 Diesel engine and a 6-speed manual transmission, 273'621 miles, air brakes, GVWR 33'000 lbs, dump bed is 18' long, tires are about 30%  VIN: 1FVABTAK91HH86018

541
2007 International 8600 Semi Tractor
2001 International 8600 Semi Tractor with 393'774 miles, It has a Cummins engine with an Eaton Fuller 10-speed transmission, air brakes, single rear axle, day cab, dual fuel tanks, good 5th wheel plate and air hoses, catwalk, tires at about 30% and is in good running condition.  VIN: 1HSHWAHN07J432221

542
2001 Freightliner FL70 Flatbed
2001 Freightliner FL70 Flatbed with a CAT 3126 Diesel engine and a 6-speed manual transmission, 280'023 miles, air brakes, GVWR 33'000 lbs, dump bed is 18' long, tires are about 30% VIN: 1FVABTAK71HH86020

543
2001 Ford F-250 XL Super Duty 4X4
001 Ford F-250 XL Super Duty 4X4 with a 7.3 liter Powerstroke V-8 engine and automatic transmission showing 344,228 miles.  It is a standard cab with an 8' bed, floor mounted shifter for 4-wheel drive,  bed has a headache rack, trailer brakes, hitch, does have low compression on one cylinder,  VIN: 1FTNF21F91ED00627

544
2005 Chevy Silverado
2005 Chevy Silverado with 174'039 miles.  It is powered by a 4.8 liter V-8 engine with an automatic transmission and is 2-wheel drive.  It has a standard cab that can seat 3 with a 8' bed that has a been lined.  It comes with power windows, locks and mirrors, tow hitch and trailer lights.  The check engine light is on and the brakes are soft, tires are at about 30%. One owner vehicle with minimal rust for its age.   VIN: 1GCEC14V05Z307034

545
1997 GMC C6500 Flatbed
1997 GMC C6500 powered by a CAT 3116 diesel engine and backed by an automatic transmission.  The bed is 8' X 18x and will need new decking. It has 1 tool box, 1 fuel tank, the interior is clean,  it runs with 103k miles, GVWR 25'300, needs brake work, sells with title.  VIN: 1GDJ7H1J6VJ519444

546
1994 Ford F-150
1994 Ford F-150 with a 4.9 liter straight 6 cylinder engine and an automatic transmission. It has an 8' bed with a cap, set up for trailer brakes.  It does need brake work and sells with a title.   VIN: 1FTEF14Y8RLA76295

547
2003 GMC W3500
2003 GMC W3500 powered by a Isuzu diesel engine and backed by an automatic transmission with 100'500 miles, It is a cab over and has a 8' X 18' bed with stake sides that are removable. It runs and has good tires, It needs brakes and the windshield is cracked. It does sell with a title. VIN: J8DB4B14037006434

548
2006 Sterling AT9500 Semi
2006 Sterling AT9500 Semi with a day cab with a Mercedeez Benz engine with a Eaton Fuller 8-speed transmission and shows 605k miles and 22k hours.  It has good tires, two 100 gallon tanks, good 5th wheel plate and hoses, wet kit. It is not in running condition and does sell with a title. VIN: 2FWJA3CV76AV32742

549
2004 Dodge Ram 1500
2004 Dodge Ram 1500 with a Magnum 3.7 liter V-6 engine and an automatic transmission,171'959 miles, It has a standard cab, short bed, hitch, 2-wheel drive, some rust, tires are at about 50%, It does run but dies at idle, VIN: 1D7HA16K44J124826

549A
2000 Dodge Ram 3500
2000 Dodge Ram 3500 with 275'007 miles.  It has a Cummins diesel engine and an automatic transmission and is 2-wheel drive. The transmission was just replace with a rebuilt transmission with only 100k miles on it.  It has and extended cab, dual rear tires, contractors utility body, tow package with trailer brakes, tires in good condition,   truck runs and drives but does need brakes, Service records included.    VIN: 1B7MC3367YJ184482

549B
1993 Chevy Plow Truck K3500
1993 Chevy Plow Truck  K3500 4X4.  It has V-8  gas engine with an automatic transmission and floor mounted shift for 4-Wheel drive.  It currently has 162'087 miles.  It does have a motor knock that is undiagnosed.  It comes with a Western 8' snow plow.  It is a standard cab with an 8' bed and has trailer brakes.   VIN:  1GCHK34K5PE198906

549c
2001 Jeep Grand Charokee
2001 Jeep Grand Charokee with 246'822 miles.  It has a 4.0 liter straight 6 cylinder engine with an automatic transmission.  It does have 4-Wheel drive but the drive shaft is missing.  It has a heated leather interior, power windows, locks, mirrors and seats.  It is a 4 door that seats 5 and has good heat.  The tires are in near new condition.   VIN: 1J4GW58S71C703623

549D
2000 Ford F-250 XL Super Duty 4X4
2000 Ford F-250 XL Super Duty 4X4 with 260'899 miles.  It is powered by a 7.3 liter Power Stroke V-8 diesel engine and has an automatic transmission and has 4-wheel drive.   It is a crew cab, has a cap, 8' bed, goose neck hitch, extra set of wheels and tires inside bed, has manual windows and locks, only one battery currently,    Runs and drives.    VIN: 3FTNW21F4YMA28461

549E
2003 Chevy Silverado 2500
2003 Chevy Silverado 2500 work truck.   It has a 6.0 liter gas V-8 engine with and automatic transmission and is 2-wheel drive with 273'209 miles.  It is a standard cab with an 8' bed and has a towing package, trailer brake controller, tool box, manual windows and locks  Runs and Drives body is in good condition for age.   VIN: 1GCGC24UX3Z131855

550
Polaris Snowmobile
1981 Polaris TXL 340 snowmobile Serial Number 0801627.  It has a 2 cylinder, stroke 340cc engine.  It does start and run and could use some TLC.  Sells with Bill of Sale.  

550A
2005 Honda Rincon 650
2005 Honda Rincon 650 four wheeler, Model TRX650FA.  It has a 650cc engine, automatic transmission that can also be shifted electronically, can be switched from 2WD to 4WD, has a 2'000 lb superwinch, hitch, independent rear suspension, It  has 5'532 miles.  This machine does not run as it has sat for approximately 3 years.  Sells with Bill of Sale only 

551
Equipment Trailer
Nation Equipment Trailer,  It is an 8' wide X 20" long with a 5' dovetail and ramps that is rated at 14'000 lbs.  It is a deckover and the deck is in good condition.  It has a heavy duty jack, adjustable tongue, trailer brakes that work well, side storage box and chain box, pulls with 2 5/16'' ball, it was built new in 09/2018.   VIN: 4A9F32529K1048149

552
2009 XL Specialized Equipment Trailer
2009 XL Specialized Trail King equipment trailer that is 102'' wide X 48' long with aluminum pull outs.  It is Mechanical detatch good, tires and brakes, The Glad hands appear to be broken off. 

553
TBT-20 Equipment Trailer
1996 TBT-20 Equipment Trailer. The deck measures 8 1/2' wide and 20' long with 5' dovetail and ramps and has a 20 ton capacity. It will need new decking and it does sell with a title. 

553A
Equipment Trailer
2018 Mastiff tandem axle equipment trailer that was bought new in 2019 and has had very little use. It is 7' wide X 22' long and has built in ramps, axles are rated at 7'000 lbs each with a GVWR of 14'000 lbs. and sits in 16" wheels. Comes with LED lights, trailer brakes, treated floor, heavy duty jack pulls with 2 5/16'' ball. This is in almost new condition and does come with a clear title. VIN: 1M91D262XJG929745

554
FRP Enclosed Cargo Trailer
7' X 12' Enclosed Cargo Trailer. It has a ramp rear door, curb side man door, an aluminum tool rack mounted to the front, aluminum shelving inside, pulls with 2'' ball.  No VIN, Sells with Bill of Sale Only. 

555
2020 Cargo Express Enclosed Trailer
2020 Cargo Express Enclosed Trailer, It is a 6'X12' with a v-nose with a ramp rear door curb side door. It has all LED lights, shelving inside can be removed, pulls with standard 2'' ball, single axle, has dent in diamond plate from bumper, sells with title and is in great condition only used a handful of times.   VIN: 53BCTEA13LA058242

555A
2012 Bay Bridge 8 x 20 Enclosed Trailer
2012 Bay Bridge 8 X 20 Enclosed Trailer.  It has tandem 6-lug axles, swinging rear doors, curb side man door, wired for electricity, has shelves, workbench, microwave, and 12 volt work lights in the rear.  It pulls with 2 5/16'' ball, brakes and tail lights are in working order.   Sells with Title.  VIN: 1B9BE2426CB944015

555B
2017 8' X 16' Discovery Enclosed Trailer
2017  8' X 16' Discovery Enclosed Trailer that is a one owner and custom built with tandem heavy duty 7'500 lb axles.  It has swinging rear doors, curb side man door, ladder to top, ladder rack, inside shelving, brakes, LED lights, pulls with 2 5/16'' ball.   Sells with Title.  VIN: 1D9T11623H1713146

555C
1997 Cargo Express Enclosed Trailer 8 X 16
1997 Cargo Express Enclosed Trailer  8' X 16'   Tandem axle, Swinging rear doors, curb side man door, pulls with 2 5/16'' ball, has shelving in the front, needs new tires,   VIN: 48B500G22V2012701

556
Spartan Car Hauler
Spartan Trailer MFG Car Hauler, It is 7' wide X 21' long, tandem axle with 6 lug wheels, drive on dovetail, diamond plate, removeable fenders, brakes, 5'000 lb winch included, sells with title.  VIN: 4S91CF20DA397232

557
Tilt Deck Trailer
Tandem Axle tilt deck trailer with a 10'000 lb weight rating.  It has 6 lug axles, brakes, heavy duty jack, matching spare tire, stored inside.  Measures, 78'' wide between the rails and is 20' long plus beaver tail.  Sells with Title.   VIN: 1T9FS2022X0372087

558
Rustgo Scaffold Wagon
Rustgo Scaffold wagon work platform, in usable condition with newer tires.  

558A
Utility Trailer
5' X 8' Utility Trailer with 3' ramp gate, in good condition, does have lights, pulls with 1 7/8'' ball, in good condition, sells with bill of sale only. 

558B
5' X 8' Utility Trailer
5' X 8' Utility Trailer,  It has a tilt deck, lights, jack, pulls with 2" ball and sells with Title 

559
Rustgo Scaffold Wagon
Rustgo Scaffold wagon work platform, in usable condition with newer tires.

560
Car Trailer
Home built Car Trailer with Title. It measures 70'' wide between the wheels and is 14' 6'' long and the wheel rails are 17'' wide.  It is a tandem axle with 5 lug wheels, does have trailer brakes, torsion flex suspension, includes a 3'500 lb 12 volt super winch, lights work and pulls with a 2 5/16'' ball.   

561
Home Built Trailer
Home built trailer with a deck size of 56'' wide and 106'' long. It is a single axle with 10'' wheels. It does have lights and a tongue jack, ,pulls with a 2'' ball.  Sells with Bill of Sale only. 

562
Office Trailer
8' X 16' office trailer on single axle, It is wired for electricity and has an air conditioner unit and base board heat, both are in unknown operating condition. pulls with 2 5/16'' ball, will need trailer lights. Sells with bill of sale only.  

563
1999 BMR Dump Trailer
1999 BMR tandem axle dump trailer.  It is 6 1/2' wide and 14' long and pulls with pintle style hitch.  The dump bed, roll top and brakes all work, It does have a rusty floor the rear door latch is broken and the lights need work and the tires are at 25%.   One owner since new.  Sells with title.  VIN: 43YDC1420XC003982

564
1998 BIA Dump Trailer
1998 BIA Dump Trailer.  It is 6' wide X 12' Long, Tandem Axle, It has a pintle style hook up, the dump, roll top and brakes work.  The rear latch needs repair, the floor and fender is rusted and it needs tires.   VIN:  43YDC1221WC001630  Sells with Title

564A
Tarco Leaf Vac
Tarco Leaf Vac with 3'816 hours.  It is powered by a John Deere diesel engine and was built in 11/1998.  It does have a power jack, pintle style hitch and is in good working condition.  

565
Forage Wagon
Myers Equipment Forage wagon.  The bed is 8' wide X 14' long, has an open top, 540 PTO driven, the bed and augers are in good condition.    Serial Number 884028

566
J & M Gravity Wagon
J & M Gravity Wagon,   350 bushel capacity, in good condition, one owner since new, always stored inside, could use new tires.   Serial Number 263181

567
J & M Gravity Wagon
J & M Gravity Wagon, 350 bushel capacity, in good condition, one owner since new, always stored inside, could use new tires. Serial Number 25950

568
J & M Gravity Wagon
J & M Gravity Wagon, 350 bushel capacity, in good condition, one owner since new, always stored inside, new paint,  could use new tires. Serial Number 20165

569
J & M Gravity Wagon
J & M Gravity Wagon, 350 bushel capacity, in good condition, one owner since new, always stored inside, new paint, could use new tires. Serial Number 20164

700
Skid Loader Bucket
John Deere U66 skid loader bucket with edge, 66'' wide. 

701
Skid Loader Bucket
John Deere C76 skid loader bucket,  76'' wide.

702
Skid Loader Bucket
John Deere C76 skid loader bucket, 76'' wide.

703
Quick Attach Bucket
66'' 8-tooth quick attach bucket.  

704
Skid Steer Rock Bucket 84''
Skid Steer Rock Bucket   84''

705
Skid Steer Rock Bucket 80''
Skid Steer Rock Bucket   80''

706
Skid Steer Rock Bucket 75''
Skid Steer Rock Bucket   75''

707
Skid Steer Rock Bucket 66''
Skid Steer Rock Bucket   66''

708
New Skid Loader Forks
Brand new walk through forks for skid loader.  Forks are 42'' long

709
New Skid Loader Forks
Brand new forks for skid loader. Forks are 42'' long

710
New Skid Loader Forks
Brand new forks for skid loader. Forks are 42'' long

711
New Skid Loader Forks
Brand new forks for skid loader. Forks are 42'' long

711A
New Bobcat Skid Loader Walk Threw Pallet Forks

711B
New Bobcat Skid Loader Walk Threw Pallet Forks

711C
New Bobcat Skid Loader Walk Threw Pallet Forks

712
Pallet Forks
Bobcat Pallet Forks, quick attach ready, Forks are 42'' long and have adjustable width, one with hole for trailer ball or pin to move trailers and equipment.  

713
Case Skid Loader Snow Blower
Case Skid Loader Snow Blower.  It is a 2 stage and is 6' wide and 2' high, augers are driven by hydraulics and the chute is 12 volt. It has a good cutting edge and is in good condition. 

714
New Skid Loader Push Pull Snow Plow
New skid loader push pull snow pusher. It is 8' wide and has cutting edge on bottom for pushing and on top for pulling when rotated. 

715
New Skid Loader Push Pull Snow Plow
New skid loader push pull snow pusher. It is 8' wide and has cutting edge on bottom for pushing and on top for pulling when rotated.

716
New Fork Lift Push Pull Snow Plow
New fork lift push pull snow pusher. It is 8' wide and has cutting edge on bottom for pushing and on top for pulling when rotated.

716A
John Deere Skid Steer Snow Blade
John Deer Skid steer snow blade.   9' wide, 4-way blade,   1 cylinder needs repair or replaced.  

717
New 12' Ideal Snow Pusher
New 12' Ideal Snow Pusher for bucket mount on back hoe or wheel loader.  

718
Ideal Snow Pusher
14' Ideal Snow Pusher, quick attach for bucket mount, only 2 yrs old with little use in good condition.  

720
Henke Snow Plow For Wheel Loader 24'
24' Henke snow plow for wheel loader.  It has a 12' main blade and 6' wings on each side.  It is a 6 way blade and wings move independently from each other.  It mounts to a JRB coupler and works as it should.   

720A
12' Snow Pusher
12' Snow pusher for bucket mount, has reversable rubber flap, only used 1 season.  

720B
Western Contractor Grade V Style Snowplow
 in like new condition, the owner stated that it was only used a couple time

721
Skid Steer Snow Plow
8' skid steer snow plow, 6-way straight blade, with very little use in almost new condition.  

722
Blizzard Snow Plow
Blizzard Speed Wing Snow Plow in good condition model 8600SW Sells with controls

723
Western V-Blade Snow Plow
Western V-Blade Snow plow in usable condition, 8' wide. 

724
Fisher Snow Plow
Fisher Minute Mount 2 snow plow, It is 8' wide plus wings, good cutting edge, good working condition, Serial Number 35557

725
Grader Box
Grader box set up for skid loader in good condition and is 6' wide. 

801

726
New Skid Steer Rock & Brush Grapple 84''
New Skid Steer Rock & Brush Grapple  84''

727
New Skid Steer Rock & Brush Grapple 80''
New Skid Steer Rock & Brush Grapple  80''

728
New Skid Steer Rock & Brush Grapple 75''

729
New Skid Steer Rock & Brush Grapple 66''
New Skid Steer Rock & Brush Grapple  66''

730
Skid Steer Root Grapple 70"
Skid Steer Root Grapple 70''

731
Skid Steer Root Grapple 80''
Skid Steer Root Grapple  80''

732
Skid Steer Tine Grapple Bucket

733
Skid Steer Rough Brush Mower
Spartan Equipment rough brush mower for skid steer, 52'' wide cut, articulating, in very good condition. 

734
Stump Grinder for Skid Steer
Stump Grinder attachment for skid steer, It has good teeth and is in good working condition, 

735
Home Built Log Splitter
Home built log splitter, hydraulic operated, will hold a 30'' log, It is 11 1/2' long total.  It was last used hooked up to a front end loader for power.  

736
New Skid Steer Tree & Post Puller

737
Wood Tick Log Grapple
Wood Tick Log Grapple, 72'' wide, last used on an excavator,  operating condition is unknown,  

738
NH 4200 Knuckle boom
NH 4200 knuckle boom ready for trailer mount, 996 KG (approximately 2200lb) capacity, It comes with hydraulic controls, outriggers and a continuous rotation grapple.  This machine was bout new and never used.  

739
Skid Steer Receiver Hitch Trailer Mover

740
Skid Steer Receiver Hitch Trailer Mover

741
Weldable Quick Attach Plate

742
Weldable Quick Attach Plate

743
Weldable Quick Attach Plate

744
Weldable Quick Attach Plate

745
Pallet Fork Extensions

746
Pallet Fork Extensions

747
Pallet Fork Extensions

748
Pallet Fork Extensions

749
3-Point KingKutter Brush Hog
60” works good

750
John Deere Tiller
John Deere Tiller, 8-tines in almost new condition, 3-point lift and 540 PTO driven. 

751
Woods Tiller
Woods Tiller model GHT60,  it has good tines, it is 540 PTO driven, and 3-point lift.  good condition

752
Land Pride Tiller
Land Pride Tiller model RGR1258.   It is 3 point mounted, gear driven, reverse rotation, 7'' working depth, 58'' working width, 7 flange rotor, Serial Number  1526516    Excellent condition. 

753
Kubota Mower Deck
Kubota Mower Deck model RCK60-27B.  Mid mount belly mower with 60'' cut in good working condition, fits several Kubota compact tractors.  

855

754
Bale Spear for 3-Point Hitch
.

856

755
3 Point Grader Blade
Adjustable, 84"

756
Bale Spear To Mount On the Front Of A Bucket
.

757
Quick Attach Plate For Excavator
Quick attach plate for excavator mount.

758
Fisher Salt Spreader
Fisher Salt Spreader for pick up truck, in good condition, 

759
Skid Steer Tracks
Loegering Trail Blazers tracks to fit over tires for wheeled skid loaders for better traction.  

760
Loegering Skid Loader Tracks
Loegering Tire Crawler skid loader  tracks that mount over tires.  in decent condition,  Known to fit a Bobcat 763 and will fit other machines.   15'' wide.  

761
Loegering Skid Loader Tracks
Loegering Trail Blazer skid loader tracks that mount over tires. in decent condition, Known to fit a Bobcat 763 and will fit other machines. 15'' wide.

761A
Skid Loader Tracks
Over the tire tracks for skid loader New Holland Brand.   Last used on a John Deere 325 but will fit other machines as well. 

762
Skid Loader Wheels
Set of 4 skid loader wheels and smooth tires.  Wheels are 8-lug and and holes are 8'' apart center to center, rims are 20'' and tires are 28''

763
Bobcat Wheels and Tires
Bobcat Wheels and Tires, Set of 4, 8-lug, measures 8'' from center to center, 6'' center hole. heavy wall, size 10-16.5, good tread. 

764
Telehandler Wheels and Tires
Set of 4 Telehandler wheels with mounted tires, Firestone Duraforce MH, size 370/75-28, foam filled and 14 ply rated.  known to fit JLG943 and Skytrack 8040 and may fit other machines as well.  

765
Utility Body
Monroe Customs utility body for work truck, It has 3 boxes on each side, in good solid condition.  Serial number 16-22678

766
Utility Flatbed for Truck
Utility Flatbed for work truck, Good solid bed, diamond plate floor, with lights and hitch, 

766A
Century Truck Cap
Century Truck Cap last known to fit a 2002 Chevy Silverado 2500HD that was a 4-door with a short bed.   May fit other trucks as well, has one broken window.  

767
Reversible 3-Point Rake
Reversible County Line  3-Point Rake, 72'' wide in good condition.  

768
County Line 3-Point Drag Box
County Line 3-point Drag Box that is in almost new condition.  It is 60" wide and has 5 ripper shanks.  

769
County Line 3-Point Ripper
County Line 3-Point Ripper that is quick hitch compatible.  Good condition.  

770
Bobcat Tree Spade Attachment
Bobcat Tree Spade Attachment,  36" cone style, should be a direct fit to any Bobcat Skid Loader G series and newer and may fit other models also.   It is electric over hydraulic and is in working condition.  It does need some welds repaired.   

771
3-Point Ford Flail Mower
Ford Flail Mower model 719.   It is a 6' wide 3-point attachment and is driven by a 540 PTO.  It is in working condition.  Serial number: 5228

772
3-Point Log Splitter
3-Point Log splitter that is PTO driven.  It is in working condition and will split logs up to 27" long.   

773
Driveway Finisher Grader
Driveway Finisher Grader for skid loader mount that is brand new from the factory.   It has mounts on both sides, one side is for grading and the other side for finishing.  It is 6' wide X 6' long and made from hardened steel.  The cutting edges are adjustable height and are reversible.

774
10' QT Pusher

775
10' QT Pusher

776
10' QT Pusher

777
10' QT Pusher

778
8' QT Pusher

778A
8' QT Pusher

778B
8' QT Pusher

779
8' QT Pusher

780
8' QT Pusher

781
8' QT Pusher

782
84" QT Skeleton Bucket

783
84" QT Skeleton Bucket

783A
84" QT Skeleton Bucket (no sides)

783B
84" QT Skeleton Bucket (no sides)

784
70" QT Root Rake

785
70" QT Root Rake

786
84" Light Duty Fork Extensions

787
84" Light Duty Fork Extensions

788
84" Light Duty Fork Extensions

789
84" Light Duty Fork Extensions

790
Quick Attach Skid Loader Fork Mount
Quick Attach Skid Loader Fork Mount,   Lot 791 forks do not fit.   

791
48" Forks
Set of 48'' Forks 

793
Skid Steer Attach Frame

794
Skid Steer Attach Frame

795
Skid Steer Attach Frame

796
Skid Steer Attach Frame

797
Skid Steer Attach Frame

798
Skid Steer Attach Frame

799
Skid Steer Attach Frame

800
Skid Steer Attach Frame

802
Skid Steer Plate with Guard 5/16"

803
Skid Steer Plate with Guard 5/16"

804
Skid Steer Plate with Guard 5/16"

805
Skid Steer Plate with Guard 5/16"

806
3-Point Work Platform

807
3-Point Work Platform

808
3-Point Adjustable Blade

809
Tiller For Garden Tractor

810
Pallet of Misc 3-Point Parts

811
John Deere Rotary Harrow
John Deere Rotary Harrow, 3-point lift, 14' wide.   Serial number 000591  Type E0414

812
Backhoe Bucket
Backhoe Bucket,  22'' wide, 5-tooth, Rufurbished and painted, fitment is unknown,