Ham Radio, Vintage Audio & Tube Radios!
Previous Page Listing ID#: 236574

Auction Location

Kansas City, MO 64116
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Thursday Oct 15
Bidding Ends: Thursday Oct 29
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Schulman Auction & Realty, LLC

Website: www.schulmanauction.com

GoToAuction.com ID#: 1811
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
TERMS AND CONDITIONS ONLINE ONLY AUCTION! These are the Terms and Conditions of Sale for this online auction. They consist of this introduction and 27 (twenty-seven) numbered paragraphs and subparagraphs that outline the relationship between you ("the Bidder") and Schulman Auction & Realty, LLC, ("the Auctioneer"). Throughout these Terms and Conditions, the terms "auctioneer," "we," "us," and "our" will refer to the Auctioneer, and the terms "you" and "your" will refer to the Bidder. If you want to bid in this online auction, you will first have to read these Terms and Conditions. And by placing a bid, you agree that you have read the Terms and Conditions and understand the terms are binding on both you and on the Auctioneer, and all parties will be expected to abide by the Terms and Conditions if any issues arise in connection with this sale. Please read these Terms and Conditions carefully! They contain important information about the online auction itself and your rights and responsibilities as a bidder. 1. Registration: To gain access to this online auction, you will need to register and obtain a bidder number. You must be eighteen years old or older to register. You agree that all information that you provide during the registration process will be true and accurate. You will be banned from participation in the Auctioneer's auctions indefinitely should you provide any false information during the registration process. 2. Credit Card: In order to register for this auction, you will need a working Visa, MasterCard, Discover, or American Express card associated with your account. This card will be automatically charged at the end of the auction, if you are a winning bidder. NOTE: If this is your first time registering for one of our auctions with a credit card, your card may be temporarily charged a small fee of $1 or less for authentication purposes. This charge WILL be REMOVED after your card is successfully authenticated. None of your credit card information is stored with the auctioneer. 3. Bidder's Duty to Update Information: Whether you are a new or returning bidder, you agree that if any of the information associated with your bidder number - including contact information and credit card information - changes at any time prior to, during, or after this sale, you will notify the Auctioneer of the change by updating your bidder profile. 4. Conduct of Sale: All bids, and credits in this sale will be made in United States Dollars (USD). You agree not to use any hardware, software, program, or system that would interfere with the orderly conduct of this sale. You further agree not to copy, reproduce, or publically display any content from the Auctioneer's website without first obtaining written permission from the Auctioneer. 5. Bidder's Duty to Inspect and Investigate: You acknowledge that the Auctioneer is providing you with the opportunity to inspect the items being offered for sale in this auction. The Auctioneer strongly encourages you to attend the scheduled inspection for this auction. If you choose not to attend the scheduled inspection and are in doubt about the condition, completeness or suitability of a given item, please bid accordingly. a. Photographs and Descriptions: The Auctioneer regularly posts item descriptions and photographs to aid bidders in the bidding process, and we make every effort to ensure that the descriptions and photographs that we post accurately represent the items being offered for sale. In some photographs, multiple items may appear to be joined as a single unit, however you should not assume that a lot consists of more than one item simply because various items appear connected or are featured in the same photograph. Also understand that, on occasion, the wrong photograph may be displayed for a given item. At all times, you are bidding on items as they are described on this website, not as they appear in any photograph. b. Bid Wisely: We want everyone to be pleased with their purchases and most will. However, when you bid on the wrong item or decide an item is not suited for your intended use, our clients will not assume the cost of your mistakes. You agree that your failure to inspect or otherwise become fully informed about the items offered for sale in this auction will not be grounds for a refusal to pay amounts due to the Auctioneer nor for any claim against the Auctioneer. 6. WARRANTY AND CONDITION OF ITEMS SOLD: ALL LOTS AND ITEMS ARE SOLD AS IS, WHERE IS, WITH ALL FAULTS, AND WITH NO EXPRESS OR IMPLIED WARRANTIES. NO ACTION TAKEN BY THE AUCTIONEER OR ITS AGENTS IS INTENDED TO CREATE ANY EXPRESS OR IMPLIED WARRANY AS TO ANY LOT OR ITEM IN THIS SALE. THE AUCTIONEER SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE, CONFORMITY WITH ENVIRONMENTAL LAWS OR REQUIREMENTS, NON-INFRINGEMENT, ACCURACY, TITLE, OR ANY OTHER WARRANTY. IT IS BELIEVED THAT ALL DESCRIPTIONS ARE ACCURATE. DESCRIPTIONS ARE NOT GUARAUNTEED. 7. When You Have Been Outbid: If you are outbid during the course of this auction, you will be notified by email, if you have chosen this option when you registered. You can see if you are high bidder at any time using the "Watch List" feature; items which you have put on the Watch List will show the bidder name of the high bidder. 8. Reporting Bidding Errors: You should carefully review every bid you choose to make before submitting that bid. The Auctioneer will not automatically assume that any bid, even a bid that increases your own lower bid, was made in error. If you mistakenly increase your own bid at any time during the auction, or make some other bidding error (e.g. placing your bidder number in the price field), you must immediately contact the Auctioneer by email at david@dschulmanassociates.com. Reports of bidding errors must be made via e-mail; phone reports will not be accommodated. 9. Timeliness of Bidding Error Reports: If you make a bidding error during this auction, you must identify and report the error before the auction begins to close. The Auctioneer will not undo bidding errors reported after the auction has begun to close. 10. Bidder's Duty to Report Fraud: You are responsible for all bids made from your account. If you believe that an unauthorized person has gained access to your account, you must notify the Auctioneer immediately by sending an e-mail to david@dschulmanassociates.com. You must also report the incident to the relevant law enforcement authorities and send the Auctioneer a copy of any resulting police report. You understand and agree that if you do not promptly report any suspected fraud to the Auctioneer and to the relevant law enforcement authorities, you will be held personally responsible for all purchases made using your account and bidder number. 11. Changes in Circumstance: All aspects of this auction are subject to change without notice. The Auctioneer reserves the right to, at any time: (1) add or remove items from the auction, (2) split or combine lots, (3) add minimum bids or reserve prices, (4) cancel, suspend, extend or reschedule the sale of an individual item, lot, auction, and/or auction event, (5) make changes to the auction's closing, inspection, or removal times, or (6) take any other action the Auctioneer deems necessary to effect the fair conduct of this sale or protection of buyers', sellers', or other parties' interests. In the event a seller withdraws an item from this auction prior to the close of the auction, the Auctioneer may leave the item on the catalog and buy the item back on behalf of the seller to establish the Auctioneer's earned commission and the buyer's premium due to the Auctioneer from the seller. 12. Closing: the Auctioneer's online auctions are designed to mimic traditional "live" actions. For this reason, this auction will have a staggered, dynamic closing. a. Staggered Closing: This online auction will automatically begin to close at a rate of 3 items per minute. Items' closing times may be extended past their scheduled closing time, however, as a result of the Auctioneer's dynamic closing feature. b. Dynamic Closing: The closing time of an item is automatically extended an additional 3 minutes whenever a bid is placed within the 3 minutes leading up to an item's scheduled closing time. 13. Winning Bids: If you place a bid in this sale, and your bid is determined to be the winning bid, you become obligated to pay for the item(s) that you have won at the price you gave as your bid. a. Notification: If you end up placing one or more winning bids in this auction, the Auctioneer will contact you by e-mail to let you know which items you have won. This e-mail notification will be the only contact you receive from the Auctioneer about your winning bids; this means that you are responsible for checking your e-mail following the close of the auction to determine what items you have won. If you do not receive an e-mail identifying you as a winning bidder, it is because the Auctioneer has no record of your having placed a winning bid. b. Bid Inquiries: If you believe that you placed a winning bid, but do not receive an e-mail, you must notify the Auctioneer by sending an e-mail to david@dschulmanassociates.com explaining your situation by 9:00am on the day after of the auction has closed. You agree that the Auctioneer will be the sole authority regarding the identification of winning bids. 14. Payment: At the conclusion of this auction the credit card you used to register for this auction, will automatically be charged for your invoice amount. a. Chargebacks Prohibited: You agree that you will accept all charges placed on the credit card associated with your account, and you agree that you will not charge back any amount that is charged s to your credit card. You agree that this provision applies equally to amounts charged in connection with any items you have won and any costs or fees discussed in Paragraphs 16-18 of these Terms and Conditions. 15. Buyer's Premium: A 10% buyer's premium is added to every purchase. This means that if your winning bids add up to $100, you will be charged $110 at checkout, plus any applicable sales tax. 16. Default and Resale: You agree that if, after being declared the winning bidder, you fail to pay for any item that you have won for any reason, your account will be declared in default. If you still refuse to pay for any item after being notified of your account's being in default, you agree that the Auctioneer will have the right to immediately resell your item, and you further agree to pay (1) any cost associated with the resale and (2) any deficiency between your original purchase price and the resale price. 17. Picking Up/Shipping Your Items: IF you are picking up your items, you are solely responsible for the safe and timely pick-up and removal of any items you may win at this auction. IF you are having your items SHIPPED due to being located out of the area, see section "a" below. If you are unable to safely pick up and remove your items during the item pick up times that have been scheduled for this sale, PLEASE DO NOT BID. The Auctioneer does not hold items beyond the published removal times. The Auctioneer will not issue you a refund if you are unable to pick up and safely remove your items during the published removal times. a. SHIPPING: If shipping out of the area is required, we work with a local UPS franchise that will pickup your items the week following the auction. Shipping charges will be billed to you separately, by the shipper. Your name and phone number, along with a copy of your paid invoice and items won, will be given to the shipping company so that they may contact you to arrange shipping and payment. b. Bidder's Duty to Remove Items Safely: Again, you are solely responsible for the safe pick-up, removal, and transportation of your items. You agree that the pick-up, removal, and transportation of your items will be solely at your expense and at your risk. You further agree that you will be responsible for any damage that you or any of your agents cause during any inspection or removal period, and also agree that the credit card associated with your online account will be charged for any expenses incurred and/or repairs necessary as a result of any damage that you cause. c. Release Upon Presentation of Receipt: You understand and agree that the Auctioneer will release your items only after you or your agent presents a sales receipt generated by the Auctioneer stating that your account is paid in full. You further understand and agree that it is your duty to ensure that any agent picking up items on your behalf has a copy of your paid sales receipt to present at the pick-up location. You explicitly authorize the Auctioneer to release your items to any person in possession of your paid sales receipt. No item will be released to any person unless that person presents a paid sales receipt listing the item in question. d. Abandonment: You understand and agree that any item that you do not pick up during the published removal times will be considered abandoned. You understand and agree that you will be charged a reasonable fee for the storage, removal, and/or disposal of any item that is considered abandoned. 18. Disposal of Unclaimed Items: In the event you refuse to pay for or abandon any item that you win at auction, the Auctioneer will have the option of reselling, removing, storing, or disposing of the unpaid or abandoned item. You understand and agree that you will be personally responsible for all deficiencies including all legal, collection, transportation, and storage expenses associated with your delinquent account and/or abandoned items. In the event of resale, you agree to pay any cost associated with the resale as well as any deficiency between your original purchase price and the resale price. 19. Non-Delivery: In the unusual event that an item has been grossly misrepresented or is unavailable for pickup during the published removal times, you must immediately notify the Auctioneer's onsite staff of the problem and file a claim for non-delivery within twenty-four hours. You understand and agree that if you fail to make a claim for non-delivery within twenty-four hours of your discovering the problem, your claim for non-delivery will not be honored. Claims for non-delivery may be filed by replying to the e-mail that informed you of your winning binds. Your claim must fully describe the nature of the problem that you have identified. 20. Claims and Choice of Venue: Any claim or controversy out of or relating to these Terms and Conditions, or to any breach thereof, will be settled either (1) in Clay County, Missouri's Small Claims Court, if the claim in question amounts to less than $5,000, or (2) by means of arbitration in accordance with the Commercial Arbitration Rules of the American Arbitration Association, if the claim in question amounts to more than $5,000. In the event of arbitration, judgments upon the award rendered by the arbitrator may be entered by any court having jurisdiction. You agree that all claims will be litigated or arbitrated on an individual basis, and will not be consolidated with any claim made by another party. Venue in every case will be Clay County, Missouri. You agree that any judgments awarded may be applied to and collected from you personally or corporately. Should any party file an action contrary to this paragraph, the counterparty may recover reasonable legal fees and costs. Further, if you bring a claim against the Auctioneer and do not prevail, you agree that you will reimburse the Auctioneer for all reasonable legal fees and costs. 21. Interim or Preliminary Relief: Notwithstanding the contents of Paragraph 22 of these Terms and Conditions, you agree that the Auctioneer may seek interim or preliminary relief in a court having jurisdiction in order to protect any rights or property that the Auctioneer may have pending arbitration or litigation. 22. Liability: In all cases, the Auctioneer's liability, and the liability of the seller of the items in this auction, will be limited to the refund of your purchase price. The Auctioneer will not be liable for any amount in connection with the postponement or cancellation of this auction, or the withdrawal of any item or lot from this auction. In no event will the Auctioneer be liable for lost profits or any special, incidental, or consequential damages arising out of or in connection with this auction or any related sale or transaction. a. No Liability for the Acts of Third Parties: The Auctioneer is not responsible for any action taken by any seller, bidder, or other third party before, during, or after this auction. b. No Liability for Site Malfunction: You understand that this auction is online-only, and so relies on devices and programs that may malfunction without warning. You agree that the Auctioneer will not be liable for any error or inconvenience that may be the result of such a malfunction. You further understand and agree that the Auctioneer may void or suspend any sale, or resell any item, if the Auctioneer determines a transaction to have been affected by any site malfunction. 23. Indemnification: You agree to indemnify, defend, and hold harmless the Auctioneer and its employees, officers, owners, affiliates, agents, and representatives from and against any claims, losses, damages, liabilities, judgments, fees, costs, and expenses, including reasonable legal fees and costs, related to, arising from, or associated with you, your agents or representatives including, but not limited to, personal injury or property damage caused at any sales site or during removal or transportation of items won at auction, any dispute with another bidder, or any violation of these Terms and Conditions. 24. Limitations: These Terms and Conditions do not, nor are they intended to create any agency, partnership, joint venture, employer-employee, or franchisor-franchisee relationship. These Terms and Conditions cannot be altered except in writing by the Auctioneer. 25. Severability: If any term, provision, paragraph, condition, or other portion of this agreement, or the application of these, to any person, place, or circumstance, is held to be invalid, unenforceable, or void, the remainder of this agreement and such term, provision, covenant or condition as applied to other persons, places and circumstances will remain in full force and effect. 26. Governing Law: These Terms and Conditions will be governed by and construed under the laws of the State of Missouri. 27. Entire Agreement: These Terms and Conditions contain our entire agreement and supersede any prior oral or written agreements relating to the same subject matter.
Listing Information
This auction features some fantastic gear, including a Henry 8K Ultra and a 4K Ultra, as well as a Collins 30S-1, and Elecraft KPA-500 amplifier. A FlexRadio FLEX-6600 and Maestro Control Console, as well as an ICOM IC-7600, IC-7410, IC-R9000 and a Kenwood TS-450S. A Collins S-Line station and a Hallicrafters Cyclone SR-400A and PS-500A supply will also be featured. Of course there are many other pieces of Drake, Hallicrafters, Swan and Heathkit included, along with related items. Test equipment includes some tried and true gear from HP such as a 3585A and 8590A spectrum analyzer and a 5343A microwave frequency counter. There is also a Tektronix 7613 scope with the 7L18 spectrum analyzer module and many other pieces of test equipment. For our audio enthusiasts we'll be selling gear from the local estate of "Jaymanaa" in this auction as well as the next few upcoming sales. Jay was a frequent contributor to AudioKarma.org. Included will be a Conrad Johnson amplifier, Revox B215, B225 and B285 and many other items from H.H. Scott, Sherwood, Dynaco/Dynakit and Klipsch.

1
PAYMENT!
At the conclusion of this auction, the credit card you used to register with will automatically be charged for your purchases. A PAID invoice will be emailed to you. Please be sure that the card you used to register has sufficient funds/credit limit...

2
BIDDING INFORMATION!
Bidding is pretty simple, particularly if you've bid in an online auction before, but here's a quick rundown on some features that may be unfamiliar: Each lot in the auction is scheduled to close approximately 20 seconds apart. For example, Lot 1 is...

3
SHIPPING!
If you require shipping, please cut and paste the following link into your browser for specific details you need to know about our shipping process: https://www.schulmanauction.com/vintage-electronics/auction-shipping/

4
PREVIEW / PICKUP!
PLEASE NOTE OUR NEW ADDRESS BELOW Previews and pickups will be located at: One block north of our previous location. It's the commercial building behind the home. 404 NE 41st Street Kansas City, MO 64116 One block north of our previous location. ...

5
EQUIPMENT TESTING!
When possible, we do our best to test the equipment we sell so that you will know exactly what you are bidding on. That being said, we perform basic tests such as overall power consumption, receiver sensitivity, transmitter power output, etc. Depend...

6
Henry 8K Ultra Linear Amp/Late Version
Henry 8K Ultra Linear Amp/Late Version, Well, here's one you don't see every day. This is a rare beast, especially in the condition it's in, both cosmetically and working. You can tell that the previous owner took very good care of his gear. This amp...

7
Henry 4K Ultra Linear Amplifier, 220V
Henry 4K Ultra Linear Amplifier. Here's another gem of an amp, owned by the same individual that took such great care of the 8K, in the previous lot. With its' single 8877 in a grounded grid configuration, this amp produced over 2200W carrier output...

8
Collins 30S-1 Linear Amplifier, 220V
Collins 30S-1 Linear Amplifier. A very nice looking as well as working piece of Collins gear! With only 45W of drive, carrier output was approximately 925W. That's one hot tube! The amp is wired for 220V with a twist-lock plug, as shown. (SSB positi...

9
Elecraft KPA500 Amplifier
Elecraft KPA500 Amplifier. Very nice looking amplifier in great working condition. With 40W of drive, approximately 451W output was achieved on all bands. Includes manual, power cord and extra fuses. s/n: 2047 Approx. Weight: 26 lbs. Approx. Dims:...

10
FLEX 6600 Transceiver & Maestro Console
FLEX 6600 Transceiver & Maestro Console. This is one fantastic SDR! For those of you familiar with FLEX, you know what we're talking about. The 6600 itself is working well using one of the latest or the latest (at the time of writing this descripti...

11
ICOM IC-7600 Transceiver
ICOM IC-7600 Transceiver. Very nice looking and sounding rig. Very lightly used and in great shape! Receive sensitivity is approximately 0.3 uv on all bands and CW carrier output is about 95W+ on all bands. Includes mic, DC power cord, hand mic and...

12
ICOM IC-7410 Transceiver
ICOM IC-7410 Transceiver. Another very nice looking and working ICOM rig! Receive sensitivity is approximately 0.2 uv on all bands and CW carrier output is 95W+ on all bands. DC power cord and hand mic included. s/n: 02002313 Approx. Weight: 29 l...

13
ICOM PS-126 Power Supply
ICOM PS-126 Power Supply works and looks great. Tested OK with both the IC-7600 and IC-7410 in previous lots, at full power. Approx. Weigth: 6 lbs. Approx. Dims: 9x5x4

14
ICOM ID-51A Transceiver, Charger & Software
ICOM ID-51A Transceiver, Charger & Software. This dual bander appears to have been never used, as the plastic film is still present on the face of the display. RT Systems programming software WCS-D51 and BC-202 Rapid Charger included. Approx. Tota...

15
Kenwood TS-450S HF Transceiver
Kenwood TS-450S HF Transceiver. This rig is in great cosmetic as well as working condition. Includes yellow "Storm Case" similar to Pelican cases. Receive sensitivity is 0.1 uv on all bands, and CW carrier output is approximately 85W on all bands. ...

16
Collins 75S-3B Receiver, WE
Collins 75S-3B Receiver. This radio is in good to very good cosmetic condition with only a few minor scuffs/scratches. The trim ring is not yellowed. Receive sensitivity is approximately 0.5 uv on all bands and all functions are operational. The 2....

17
Collins 32S-3 Transmitter, WE
Collins 32S-3 Transmitter in good working condition with approximately 65 ~ 90W CW carrier output. s/n 13685 Approx. Weight: 16 lbs. Approx. Dims: 14x13x8

18
Collins 516F-2 Power Supply
Collins 516F-2 Power Supply in good working condition. As you can see, it was recapped at some point in the past, and solid state rectifiers are being used. s/n 13039 Approx.Weight: 31 lbs. Approx. Dims: 9x7x6

19
Collins 312B-4 Station Control, WE
Collins 312B-4 Station Control in good working and cosmetic condition. Trim ring is not yellowed. There are some minor scuffs and scratches to the cabinet. s/n 55846 Approx. Weight: 6 lbs. Approx. Dims: 12x10x8

20
Hallicrafters Cyclone III SR-400A & PS-500A
Hallicrafters Cyclone III SR-400A Transceiver & PS-500A Power Supply. Here's one you don't see very often, especially in this shape! Cosmetically, there are some scuffs/scratches and a bit of paint loss to the cabinet, but overall very nice condition...

21
Yaesu FT-101EE SSB Transceiver
Yaesu FT-101EE SSB Transceiver. This rig is in overall good to very good cosmetic condition. Receive sensitivity ranges from 0.2 - 3.0 uv on all modes. Power output is approximately 100W on 80-40M, 80W on 20M and 40W on 15-10M. There is no RX/TX on ...

22
ICOM IC-732 Transceiver
ICOM IC-732 Transceiver in need of a bit of work. Receive sensitivity is about 30.0 uv, and there is no TX output. The PLL does not lock on 160M-40M, and is likely caused by a problem with VCO#1 of the main loop. The set does lock on 10M-30M, however...

23
Yaesu FT-107M Transceiver
Yaesu FT-107M Transceiver. Nice looking rig that you just don't see every day. Receive sensitivity is 0.1 uv on all bands. CW carrier output is approximately 100W on 160M-12M, and 60W on 10M. All other features appear to be OK. There is NO narrow C...

24
ICOM IC-R9000 Receiver, w / NEW Display
PLEASE NOTE, this item will be shipped from Las Vegas, NV for a flat rate of $125 to anywhere in the Continental US. It will be added to your final invoice. If you live elsewhere or would like to pick this radio up in Las Vegas, please contact the au...

25
Hallicrafters SX-100 MARK 2 Receiver
Hallicrafters SX-100 MARK 2 Receiver in overall good cosmetic condition. Receive sensitivity is about 3.0 uv and power consumption is 70W at 117VAC. Approx. Weight: 40 lbs. Approx. Dims: 19x10x9

26
Hammarlund HQ-170A Receiver
Hammarlund HQ-170A Receiver in very good to excellent cosmetic as well as working condition. All functions work well, and receive sensitivity is about 0,3 uv on 160~10M, and 0.7 uv on 6M. Power consumption is 93W at 117VAC. The clock is in working c...

27
Drake R-4B Receiver
Drake R-4B Receiver. Cosmetically, this unit does have some scuffs/scratches to the cabinet, as shown, and there is a slight downward bend to the rear of the case. The front panel is in very good to excellent condition, however. All functions are wo...

28
Drake R-4C Receiver
Drake R-4C Receiver in good looking as well as operating condition. Receive sensitivity is about 0.7 uv or better on all bands. There is no CW .25 filter or calibrator, present. However, the CW 1.5, and .5 filters are installed, as shown on the back ...

29
Drake R-4C Receiver
Drake R-4C Receiver in good cosmetic condition with approximately 1.0 uv or better receive sensitivity on all bands. All functions do appear to work, however, the controls are noisy/dirty and will need some cleaning and TLC. Also, please note the f...

30
Drake T-4XC Transmitter
Drake T-4XC Transmitter in good working and looking condition. Works well on all bands with about 100W+ CW carrier output. This unit was used to the test the L-4B amplifier, also found in this auction. Approx. Weight: 14 lbs. Approx. Dims 13x11x6

31
Drake T-4XC Transmitter, parts or repair
Drake T-4XC Transmitter for parts or repair, non-operational. Excessive current draw and smoke! Approx. Weight: 14 lbs. Approx. Dims 13x11x6

32
Drake MS-4 Speaker/AC-4 PS
Drake MS-4 Speaker and AC-4 Power Supply. Works well with T-4XC at 100W output. Approx. Weight: 24 lbs. Approx. Dims: 12x11x6

33
Drake MN-2000 Matching Network Antenna Tuner
Drake MN-2000 Matching Network Antenna Tuner. Works well on all bands. As you can see in the photos, the band switch knob has been replaced. Approx. Weight: 15 lbs. Approx. Dims: 16x11x6

34
Drake W-4 Wattmeter
Drake W-4 Wattmeter. Nice looking meter, with a good meter movement, however, the meter will not read forward or reverse power. An ohmmeter was used to test the meter movement. Approx. Weight: 1 lb. Approx. Dims: 6x5x4

35
Drake L-4B Linear Amplifier & Power Supply
Drake L-4B Linear Amplifier and Power Supply. Some scuffs/scratches, but overall in good cosmetic shape. Wired for 220V, this Class B grounded grid amp, with its two 3-500Z's, produced about 472W CW carrier output with only 54W of drive. Approx. We...

36
Drake UV-3 Transceiver & PS-3 Supply
Drake UV-3 FM Transceiver & PS-3 Supply. Here's one you don't come across every day. The UV-3 transceiver is in working condition with the accompanying PS-3 supply. Receive sensitivity is approximately 0.5 uv on 2M, and 0.3 uv on 1.25M and 70cm. Pow...

37
Swan 1500Z Linear Amplifier
Swan 1500Z Linear Amplifier in very good cosmetic condition. With its pair of 572B's, this amp produced about 323W CW carrier output with 55W of drive. Approx. Weight: 40 lbs. Approx. Dims: 15x15x8

38
Hallicrafters S-118 Receiver
Hallicrafters S-118 Receiver in overall fair to good cosmetic condition. The cabinet looks great, but the brushed metal/chrome on the faceplate is scratched and scuffed, as shown. That being said, all functions work, and receive sensitivity is abou...

39
Hallicrafters S-214 Receiver
Hallicrafters S-214 Receiver. You don't see these every day. This solid state radio is in good condition with some scratches and scuffs. The telescoping antenna extends and retracts, but the screw on tip is missing. Receive sensitivity is about 3.0 ...

40
Hallicrafters SR-150 Transceiver
Hallicrafters SR-150 Transceiver in overall good cosmetic condition, as shown. The 28 MHz band is nonoperational in receive, all other bands are about 0.5 uv sensitivity. CW carrier output is about 14W on 3.5 MHz, 80W on 14 MHz, 60W on 21 MHz, and...

41
Hallicrafters SX-25 Super Defiant Receiver
Hallicrafters SX-25 Super Defiant Receiver in overall good cosmetic condition, both inside and out. This set will need a tune-up/alignment. Receive sensitivity is approximately 15.0 - 50.0 uv across the bands. Approx. Weight: 40 lbs. Approx. Dims:...

42
Hallicrafters SX-71 Receiver
Hallicrafters SX-71 Receiver in overall good cosmetic condition. The volume and sensitivity knobs are non-original, as shown. The switches/contacts on this set are dirty and will need some cleaning and lubricating. Receive sensitivity is about 15.0 ...

43
Hallicrafters HT-32 Mark 1 Transmitter
Hallicrafters HT-32 Mark 1 Transmitter in overall good cosmetic condition, both inside and out. CW carrier output was as follows: 40W on 80M, 7W on 40M and 11W on 20-10M. Power consumption was 176W idle, and about 277W during transmit, at 117VAC....

44
Hallicrafters R-48A Speaker
Hallicrafters R-48A Speaker in overall good cosmetic as well as working condition. Approx. Weight: 5 lbs. Approx. Dims: 14x9x7

45
Hallicrafters S-38C Receiver
Hallicrafters S-38C Receiver in overall good cosmetic condition. Receive sensitivity is about 2.0 uv. Power consumption is 28W at 117VAC. Approx. Weight: 10 lbs. Approx. Dims: 14x9x7

46
Hallicrafters/Northrop HT-2A HF/VHF Radio
Hallicrafters/Northrop HT-2A HF/VHF Radio, handheld. There is static heard from the speaker, however, not TX/RX. The factory repair label indicates 37.525 MHz. This is a 12VDC unit. According to the internet, these radios were used by civilians dur...

47
Hallicrafters PS-150-12 Power Supply
Hallicrafters PS-150-12 Power Supply for the SR-150 to be run from a 12VDC source. All voltages test OK. 2A idle current. Approx. Weight: 7 lbs. Approx. Dims: 11x7x4

48
Johnson Viking Adventurer Transmitter
Johnson Viking Adventurer Transmitter in overall good cosmetic condition. However, this rig does not produce any TX out. Power consumption is 100W at 117VAC. Approx. Weight: 11 lbs. Approx. Dims: 11x9x8

49
RME 4004 Converter
RME 4004 Converter, as shown. The line cord is bad and will need to be replaced. No further testing done. Approx. Weight; 6 lbs. Approx. Dims: 8x7x6

50
RME 4004 Converter
RME 4004 Converter. The filter caps will need to be replaced in this unit. Power consumption was 20W at 117VAC. Approx. Weight: 6 lbs. Approx. Dims: 8x7x6

51
Heathkit HW-30 Twoer Transceiver
Heathkit HW-30 Twoer Transceiver in overall fair to good condition. As you can see, the Heahtkit logo is missing on the front plate. This unit has bad filter caps, and thus, non-operational. Power consumption was 90W at 117VAC. The crystal in this se...

52
Hallicrafters HT-1 HF/VHF Radio
Hallicrafters HT-1 HF/VHF Radio, handheld. Static is heard, but no TX/RX. Frequency unknown. According to the internet, these radios were used by civilians during the Vietnam war to contact US troops. It was known as a "village radio" that operates 3...

53
Hammarlund CB-212 Transceiver
Hammarlund CB-212 Transceiver. In fair to good cosmetic condition with mic. The DC vibrator is frozen. No RX/TX. Channels are 1, 6, 9, 11, 16 and 18. Approx. Weight: 11 lbs. Approx. Dims: 12x7x6

54
Heathkit HW-20 Daystrom Transceiver
Heathkit HW-20 Daystrom Transceiver in overall good to very good cosmetic condition. There is no TX/RX, but it is getting B+ since the regulator tube is glowing. Power consumption is 40W at 117VAC. Approx. Weight: 27 lbs. Approx. Dims: 15x11x7

55
Heathkit HW-32A SSB 20M Transceiver
Heathkit HW-32A SSB 20M Transceiver in good working as well as cosmetic condition, as shown. Approximately 80W carrier output and 0.5 uv receive sensitivity. There is no crystal calibrator installed. Approx. Weight: 12 lbs. Approx. Dims: 13x11x7

56
Heathkit HW-32A SSB 20M Transceiver
Heathkit HW-32A SSB 20M Transceiver in good working as well as cosmetic condition, as shown. Approximately 60W carrier output and 0.5 uv receive sensitivity. The crystal calibrator is installed. Approx. Weight: 12 lbs. Approx. Dims: 13x11x7

57
Gonset Communicator
Gonset Communicator for parts only. As shown. Approx. Weight: 17 lbs. Approx. Dims: 11x10x9

58
Tempo Speaker
Tempo Speaker, model number unknown. This is a working unit. Please note that the speaker cord will need to be replaced. Also, cosmetically, the unit does have some scratches to the cabinet. Approx. Weight: 4 lbs. Approx. Dims: 8x7x7

59
Mobile Speaker, unmarked
Mobile speaker in working condition, but unmarked. As you can see, the label on the bottom right corner has fallen off. It is a black metal case. Approx. Weight: 3 lbs. Approx. Dims: 7x3x5

60
ReVox B215 Cassette Tape Deck
ReVox B215 Cassette Tape Deck in working condition, and very nice cosmetic shape. There are 4 brief videos showing functionality. In order they are FF, RW, REC and REC/PLAYBACK. Power cord is included. No remote for this unit. Approx. Weight: 20 l...

61
ReVox B285 Receiver
ReVox B285 Receiver. The tuner works, however, the amp is very quiet and distorted. Cosmetic condition is very good, as shown. Power cord includec. No remote for this unit. Approx. Weight: 32 lbs. Approx. Dims:; 18x14x6

62
ReVox B225 CD Player
ReVox B225 CD Player. Very nice looking unit with some scratches and scuffs to the cabinet, and a scratch to the front plexiglass. That being said, this unit does work, both channels. However, when we first turned it on, it did not track. After work...

63
Conrad-Johnson MV50 Amplifier
Conrad-Johnson MV50 Amplifier. One of the classics, here folks! A beautiful MV50 with only minor scuffs to the cabinet. The front panel looks great and 2 cover screws are missing. That being said, only the right channel is functional on this amp. Al...

64
H.H. Scott 222-B Stereo Amplifier
H.H. Scott 222-B Stereo Amplifier. This amplifier is in good overall cosmetic condition, with a few minor scuffs/scratches, as shown. Testing was performed using a signal generator, and both channels did work, and all other functions appeared to wor...

65
H.H. Scott 299 Amplifier
H.H. Scott 299 Amplifier in good overall cosmetic condition with some scuffs/scratches, as shown. This unit is missing it's tube compliment and a cover. Power transformer tests ok, and power consumption was 5W at 117VAC. Approx. Weight: 20 lbs. App...

66
Sherwood S-9000a Amplifier
Sherwood S-9000a Amplifier in overall good cosmetic condition with some scuffs/scratches, as shown. There does appear to be a power supply issue, perhaps filter caps needing replaced. With no signal, power consumption keeps climbing upon power up. ...

67
Sherwood S8000 FM-MX Receiver
Sherwood S8000 FM-MX Receiver in overall good cosmetic condition, as shown. No testing performed due to power cord being cut and missing fuse and holder. Note that there are no tubes in this unit. Approx. Weight: 33 lbs. Approx. Dims: 16x15x5

68
The Fisher 600 / TA-600 Amplifier
The Fisher 600 Amplifier with TA-600 chassis. This amp is in overall good condition with some scratches and scuffs, and the cover is missing, as shown. Channel A is non-operational, however, Channel B is working. Receive on AM/FM is ok. Power consu...

69
Technics ST-8600 Stereo Tuner
Technics ST-8600 Stereo Tuner in good overall cosmetic as well as working condition. Power consumption is 18W at 117VAC. Approx. Weight: 23 lbs. Approx. Dims: 19x13x7

70
Trio W-40 AM-FM Stereo Receiver
Trio W-40 (Kenwood) AM-FM Stereo Receiver in good overall cosmetic condition, with some minor scuffs and scratches to the cabinet. The front panel looks very good. Testing was performed using a signal generator, and both channels did work, and all o...

71
Sansui AU-919 Integrated Amplifier
Sansui AU-919 Integrated Amplifier in overall good cosmetic condition, with a few scuffs and scratches to the cabinet, however, the front panel looks very good. Testing was performed using a signal generator, and both channels did work, and all othe...

72
Bogen SRB 20 Stereo Amplifier
Bogen SRB 20 Stereo Amplifier. This unit does not include tubes or a cover. We did test for shorts and none found. No other testing was performed. Approx. Weight: 20 lbs. Approx. Dims: 17x14x5

73
Sherwood S-5500 III 80 Watt Amplifier
Sherwood S-5500 III 80 Watt Amplifier. In good overall condition with only a few scuffs/scratches to the cabinet. The cabinet is not attached to the chassis. We did test for shorts and none were found. Approx. Weight: 30 lbs. Approx. Dims: 14x14x5

74
Dynakit FM Tuner
Dynakit FM Tuner, no model number found. The power cord is cut, the left most knob is missing and there are no tubes or a bottom cover. The bottom left of the front panel is slightly bent. Approx. Weight: 8 lbs. Approx. Dims: 13x9x4

75
Dynakit PAS-2 Preamp
Dynakit PAS-2 Preamp. This unit does have some scratches/scuffs to the cabinet and front panel, and a small dent to the top of the cover. But overall fair/good cosmetic condition. Testing was performed using a signal generator, and both channels did...

76
Dynaco FM-5 Tuner
Dynaco FM-5 Tuner in good overall cosmetic condition, as well as working condition. Power consumption is 5W at 117VAC. Approx. Weight: 9 lbs. Approx. Dims: 14x9x5

77
Dynaco FM Tuner
Dynaco FM Tuner in overall good cosmetic condition with the bottom cover missing. This unit had the power cord cut and was not tested. Approx. Weight: 8 lbs. Approx. Dims: 13x9x5

78
Dynakit PAS-2 Preamp
Dynakit PAS-2 Preamplifier. Clean, both inside and out, with a few scuffs/scratches to the cabinet. No tube compliment. Appears to be original. Power consumption was 2.5W at 117VAC. Approx. Weight: 7 lbs. Approx. Dims: 13x9x5

79
Eico HF-85 Stereo Preamp
Eico HF-85 Stereo Preamp in overall good cosmetic condition with a few scuffs/scratches to the cabinet. Testing was performed using a signal generator, and both channels did work, and all other functions appeared to work as intended. As this is vint...

80
Radio Shack Dual 15 Band Equalizer
Radio Shack Dual 15 Band Equalizer in working condition. Approx. Weight: 7 bs. Approx. Dims: 20x12x1

81
Custom Built Audio Amp by "jaymanaa"
Custom Built Audio Amp by "jaymanaa". Jaymanaa was a frequent contributor to the AudioKarma website, where he assisted many in their trials and tribulations with various audio equipment. He also built a lot of custom audio amplifiers, of which this i...

82
Custom Built Audio Amp by "jaymanaa"
Custom Built Audio Amp by "jaymanaa". Jaymanaa was a frequent contributor to the AudioKarma website, where he assisted many in their trials and tribulations with various audio equipment. He also built a lot of custom audio amplifiers, of which this i...

83
Custom Built Audio Amp by "jaymanaa"
Custom Built Audio Amp by "jaymanaa". Jaymanaa was a frequent contributor to the AudioKarma website, where he assisted many in their trials and tribulations with various audio equipment. He also built a lot of custom audio amplifiers, of which this i...

84
(4) Various 2A3 Tubes
(4) Various 2A3 Tubes. Included are the following tubes and their test data. Testing was performed using a Dan Nelson calibrated TV-7/DU tester: Sylvania, 74/38 Raytheon, 60/38 KEN-RAD, 73/38 Tung-Sol, 72/38 Where 38 is the minimum good value, or 6...

85
(4) Tung-Sol 5881 Tubes
(4) Tung-Sol 5881 Tubes. Included are the following tubes and their test data. Testing was performed using a Dan Nelson calibrated TV-7/DU tester: Tung-Sol, 42/25 Tung-Sol, 40/25 Tung-Sol, 37/25 Tung-Sol, 36/25 Where 25 is the minimum good value, o...

86
(2) Sovtek 2A3 Gold Tubes
(2) Sovtek 2A3 Gold Tubes. Testing was performed using a Dan Nelson calibrated TV-7/DU tester, as follows: 71/38 and 72/38 Where 38 is the minimum good value, or 60%. No shorts or gas. They were also current matched by the manufacturer, as shown on...

87
Klipsch Heresy II Speakers
Klipsch Heresy II Speakers. These tried and true speaker are in working condition. They do appear to be vintage, so I'm guessing that rebuilt crossovers and a re-cone job may not be far off. Cosmetically, the cases do show some wear and exhibit som...

88
Pair of Vintage JBL Speakers
Pair of Vintage JBL Speakers, as shown. You can see that the horn/tweeter was removed and the 15" woofer remains. These are some hefty speakers and I would not recommend shipping them. They are in working condition. No model number was found on the u...

89
13 Tomiko & Keen Ocean Torodial Transformers
13 Tomiko & Keen Ocean Torodial Transformers. These are new. Included are: (10) Tomiko OPT-PP-KT66 (2) Tomiko OPT-300B (1) Keen Ocean TTO-11019-04 Approx. Weight, total: 52lbs.

90
MG HM-100& HT-500 Horns
MG HM-100& HT-500 Horns. As shown, all test OK. They are used. Approx. Weight: 7 lbs. total. Approx. Dims: 10.5 inches wide and 5 inches wide

91
Emerson CS320 Radio
Emerson CS320 Radio. This table top set is in fair condition cosmetically, with some scratches and scuffs and wear throughout, as shown. The band switch knob is missing. This is an Ingraham cabinet. Electrically, only static when tuning around the ...

92
Truetone 2718 Table Radio
Truetone 2718 Table Radio. Nice looking set, that does appear to have been repainted at some point in it's life. Electrically, the set draws about 26W at 115VAC. That being said the volume control is frozen and the tuning pointer is missing, or it ma...

93
Kolster 6-D Radio Receiver
Kolster 6-D Radio Receiver. Nice looking early (mid to late 1920's) TRF set will all x01A tubes included. Untested. Clean radio, both inside and out with only minor scuffs and scratches. Approx. Weight: 30 lbs. Approx. Dims: 19x12x11

94
RCA Victor 3-BX-671 Radio
RCA Victor 3-BX-671 Radio. Overall fair to good condition cosmetically. Power consumption was about 11W at 117VAC. The set did receive BCB stations very well, with a definite 60Hz hum present. No other bands were tested, however, the controls are dir...

95
Green Zenith R-512-F Table Radio
Green Zenith R-512-F Table Radio, in overall good cosmetic condition with no chips or cracks. The bottom cover is missing, as shown. This radio is in working condition, receives well and draws about 30W at 115VAC. Approx. Weight: 5 lbs. Approx. Dim...

96
Philco 48-214 Transitone Table Radio
Philco 48-214 Transitone Table Radio in good overall cosmetic as well as working condition. Power consumption was about 24W at 117VAC. Approx. Weight: 6 lbs. Approx. Dims: 14x8x7

97
Candle VMS-1218 Portable Radio
Candle VMS-1218 Portable radio, new in box, as shown. We left the packaging intact, and did not perform any testing. Approx. Weight: 3 lbs. Approx. Dims: 11x9x5

98
RCA B-411 Portable Radio
RCA B-411 Portable Radio. Nice looking radio in leather case. This unit is non-operational. Approx. Weight: 3 lbs. Approx. Dims: 8x7x3

99
Lafayette 99-3550L 4 Band Radio
Lafayette 99-3550L 4 Band Radio, as shown. In good working condition on all bands. Approx. Weight: 6 lbs. Approx. Dims: 13x11x6

100
RCA Cathedral Radio
RCA Cathedral Radio. Model number unknown. Looks like a 6 tube set. The audio amp works, however, there is no receive and/or static heard. The cabinet is quite rough, as shown. Some of the knobs are non-original. Power consumption is 68W at 117VAC....

101
Hewlett-Packard 5343A Frequency Counter
Hewlett-Packard 5343A Microwave Frequency Counter, in good working condition. Please note we were only able to test to 2.0 GHz. This counter has two ranges, 10 Hz to 500 MHz and 500 MHz to 26.5 GHz. Approx. Weight: 21 lbs. Approx. Dims: 20x9x5

102
Hewlett-Packard 8590A Spectrum Analyzer
Hewlett-Packard 8590A Spectrum Analyzer. This set is in good working condition. The photo shows a 750 MHz signal from our generator. The range is 10 KHz to 1.5 GHz. Approx. Weight: 31 lbs. Approx. Dims: 18x13x8

103
Tektronix 7613 Scope w/7L18 Module
Tektronix 7613 Oscilloscope with rare 7L18 Spectrum Analyzer Module, which ranges from 1.5 to 60 GHz. Please note we were only able to test this unit to 2.0 GHz. Shown, is the display with a 1.9 GHz signal. There are issues with the display freezing...

104
Hewlett-Packard 3585A Spectrum Analyzer
Hewlett-Packard 3585A Spectrum Analyzer, 20 Hz to 40 MHz. This is one beast of an analyzer. It does successfully display a signal, however, as you can see in the photos, the signal displayed is quite noisy (photo 2) compared to the same signal on o...

105
Hickok 5058A Variable Power Supply
Hickok 5058A Variable Power Supply in good overall cosmetic condition. AC output is in good working order, however, their is no DC output. Approx. Weight: 20 lbs. Approx. Dims: 9x9x7

106
Sico 76 C.R. Bridge & Signal Tracer
Sico 76 C.R. Bridge & Signal Tracer. This Superior Instruments Co., bridge and tracer is in good to very good cosmetic condition. However, the unit is non-operational, except for the fact that it draws about 10W when powered on at 117VAC. Includes p...

107
Heathkit Variable Voltage DC Power Supply
Heathkit Variable Voltage DC Power Supply. This regulated supply is in good working condition and appears to be accurate up to about 300VDC. Approx. Weight: 16 lbs. Approx. Dims: 13x8x8

108
Heathkit LG-1 Laboratory Generator
Heathkit LG-1 Laboratory Generator in good overall cosmetic condition. The front panel is very clean. This is a working unit, however, the output is distorted. We tested with a 50 ohm and 1 megohm load. Approx. Weight: 11 lbs. Approx. Dims: 13x10x8

109
Three Powerstats/Variacs - 116U, 216U
Three Powerstats/Variacs. There are 2, 116U's, both test ok with ohmmeter, however, one of these has some discoloration on the windings and the wiper assembly is broken, but it is still functional. Also, there is one 216U and it tests ok with an ohm...

110
LDG AT-1000ProII Auto Antenna Tuner
LDG AT-1000ProII Auto Antenna Tuner works well on all bands. Nice looking unit! DC power cable, radio cable and manual included as shown. Approx. Weight: 6 lbs. Approx. Dims: 12x10x3

111
LDG M-7600 Meter
LDG M-7600 Meter for IC-7600. In good working as well as looking condition. With cables, as shown. Approx. Weight: 2 lbs., boxed Approx. Dims: 9x6x6, boxed

112
Astron RS-35M Power Supply
Astron RS-35M Power Supply in good working and cosmetic condition. Tested OK at 30A. Approx. Weight: 24 lbs. Approx. Dims: 11x11x6

113
Astron RS-70M Power Supply
Astron RS-70M Power Supply. Nice looking and working power supply. Tests OK at 60A. There is no plug on the end of the power cord, so you'll need to supply your own. Approx. Weight: 48 lbs. Approx. Dims: 14x13x7

114
Astron RM-35M Power Supply
Astron RM-35M Power Supply, rack mount, in good working condition. Tested OK at 35A. There are some scuffs/scratches to the top of the unit, as shown. Approx. Weight: 38 lbs. Approx. Dims: 19x15x5

115
Sencore SC61 Waveform Analyzer
Sencore SC61 Waveform Analyzer. As shown, with accessories. Manual and full set of schematics included, but not pictured. All functions "work" but the set definitely needs calibration and some of the controls are very stiff when operated. Also, the ...

116
Sencore RC 167 The Substitutor
Sencore RC 167 The Substitutor in good working condition. Manaul included, but not shown. Approx. Weight: 6 lbs. Approx. Dims: 11x8x5

117
RCA WA-504B/44D Audio Generator
RCA WA-504B/44D Audio Generator in good working condition. Sine @ about 3V RMS and Square 8Vp-p. Approx. Weight: 5 lbs. Approx. Dims: 8x6x5

118
Sencore PR47 UHF Prescaler
Sencore PR47 UHF Prescaler works well to 800 MHz with sensitivity of about 2.0V. Manual included, but not shown. Approx. Weight: 2 lbs. Approx. Dims: 4x3x1

119
Helper Instruments Sinadder 3 S103 Meter
Helper Instruments Sinadder 3 S103 Meter in good working condition! Manual included, but not shown. Approx. Weight: 5 lbs. Approx. Dims: 9x7x3

120
Helper Instruments RF-801 Millivolter
Helper Instruments RF-801 Millivolter appears to be in working condition, however, there are no probes or manual with this unit. Approx. Weight: 4 lbs. Approx. Dims; 9x7x3

121
Sencore DVM56A Microranger Multimeter
Sencore DVM56A Microranger Multimeter. All functions work, however, the unit will need calibration. Manual and probes included, as shown. Approx. Weight: 8 lbs. Approx. Dims: 14x8x5

122
Comet CAA-500 Mk. II SWR Antenna Analyzer
Comet CAA-500 Mk. II SWR Antenna Analyzer in excellent working condition, as well as cosmetic condition. This unit appears to be hardly used, as the plastic film is still covering the display. Approx. Weight: 2 lbs. Approx. Dims: 8x4x3

123
Sencore FC71 Frequency Counter
Sencore FC71 Frequency Counter in good cosmetic as well as working condition. Input sensitivity is better than 5.0 uv on all ranges. Manual included, but not shown. Approx. Weight: 7lbs. Approx. Dims: 13x9x5

124
Sencore DVM56 Microranger
Sencore DVM56 Microranger in good cosmetic condition. This is a working unit, except the OHMS range is not steady. Manual included, but not shown. Approx. Weight: 8 lbs. Approx. Dims: 14x8x5

125
Sadelco FS-3D VU Signal Level Meter
Sadelco FS-3D VU Signal Level Meter in overall good cosmetic condition. VHF works well, UHF is non-operational. Approx. Weight: 5 lbs. Approx. Dims: 11x8x7

126
LDG RCA-14 Transceiver Accessory Port
LDG RCA-14 Transceiver Accessory Port in good working condition. Appears to still be NIB. Approx. Weight: 2 lbs. Approx. Dims: 10x7x3

127
National Radio Institute NRI Variac
National Radio Institute Variac. The meter is labeled NRI with a 0-15A scale, and the rheostat is STACO ENG PRODUCTS CO. This unit may be homebrew. It is in good working order at 117VAC. Note that the meter scale is percentage of maximum output vol...

128
JPS NIR-10 Noise/Interference Reduction Unit
JPS NIR-10 Noise/Interference Reduction Unitin good working order! Approx. Weight: 2 lbs. Approx. Dims: 7x7x2

129
Kenpro KR-500 Rotor Elevation Indicator
Kenpro KR-500 Rotor Elevation Indicator powers on and draws about 4.5W, but no further testing was performed. Approx. Weight: 5 lbs. Approx. Dims: 7x6x4

130
Drake CS7 Coax Switch
Drake CS7 Coax Switch in good looking condition. The LOCAL switch works fine, however, we do not have the remote section of the switch to test. Approx. Weight: 3 lbs. Approx. Dims: 8x7x5

131
B&W 334-A Dummy Load Wattmeter
B&W 334-A Dummy Load Wattmeter in good working condition. Approx. Weight: 11 lbs. Approx. Dims: 10x10x5

132
Bird Termaline 6150 Wattmeter
Bird Termaline 6150 Wattmeter. This is a 30~500 MHz unit, in good working condition, both on HI and LOW power. Approx. Weight: 9 lbs. Approx. Dims: 11x6x4

133
Tektronix 475M Oscilloscope
Tektronix 475M Oscilloscope, 200 MHz, in good working condition with 4 non-Tek probes. Very clean unit. Approx. Weight: 27 lbs. Approx. Dims: 20x12x6

134
"Almost All" Drake Digital Frequency Display
Drake Digital Frequency Display for Drake C-Line by Almost All Digital Electronics. This unit is in good working condition. You will need to supply your own DC power cord. Approx. Weight: 1 lb. Approx. Dims: 4x4x2

135
W2IHY EQplus Processor
W2IHY EQplus Processor. This unit appears to be in excellent cosmetic condition, however, no testing was performed due to the fact that no cable are present. Approx. Weight: 4 lbs. Approx. Dims: 9x6x4

136
Trans-Key Keyer
Trans-Key Keyer. This unit was untested due to not having the appropriate power connector. Approx. Weight: 2 lbs. Approx. Dims: 7x4x1

137
Heathkit R.F. Generator
Heathkit R.F. Generator in overall good cosmetic condition, as shown. All functions work on all bands. Approx. Weight: 4 lbs. Approx. Dims: 10x4x6

138
Heathkit BE-4 Battery Eliminator
Heathkit BE-4 Battery Eliminator in fair to good cosmetic condition. This unit basically works, however, the meter is a bit erratic, but voltages measure from just under 6V to over 16V with adjustment. Approx. Weight: 15 lbs. Approx. Dims: 13x8x7

139
Heathkit SG-7 R.F. Signal Generator
Heathkit SG-7 R.F. Signal Generator in overall good cosmetic condition. The generator works, but the output signal is distorted. Power consumption is 8W at 117VAC. Approx. Weight: 8 lbs. Approx. Dims: 10x7x6

140
Heathkit C-3 Condenser Checker
Heathkit C-3 Condenser Checker in overall good cosmetic condition. This unit will need some work, as the eye tube is very dim (only visible in dark room) and does not indicate capacitance or leakage. Power consumption is 14W at 117VAC. Approx. Weig...

141
Heathkit HP-23C Power Supply
Heathkit HP-23C Power Supply, as shown. Filter caps are bad, transformer is ok. Bottom cover is missing. Approx. Weight: 15 lbs. Approx. Dims: 10x6x5

142
Ten-Tec KR50 Morse Code Keyer
Ten-Tec KR50 Morse Code Keyer, as shown, in working condition. Approx. Weight: 2 lbs. Approx. Dims: 8x6x3

143
Heathkit GD-125 Q Multiplier
Heathkit GD-125 Q Multiplier, as shown. This unit does power up, but no further testing was performed. Power consumption is 4W at 117VAC. Approx. Weight: 2 lbs. Approx. Dims: 9x4x3

144
Kenwood PS-30 DC Power Supply
Kenwood PS-30 DC Power Supply. This unit is in fair cosmetic condition with some corrosion to the cabinet and rear panel, as shown. It is unregulated with 15V output, however, it drops to zero with a load. Some work will need to be done. Approx. Wei...

145
Lafayette 99-33094 Antenna Impedance Meter
Lafayette 99-33094 Antenna Impedance Meter in good working condition. Approx. Weight: 3 lbs. Approx. Dims: 10x5x3

146
ICOM IC-PS30 Power Supply
ICOM IC-PS30 Power Supply in good working condition. Tested with 20A load with no issues. Approx. Weight: 11 lbs. Approx. Dims: 12x10x5

147
ICOM IC-SP3 External Speaker
ICOM IC-SP3 External Speaker, as shown. In working condition, however, the input connector is intermittent. Approx. Weight: 5 lbs. Approx. Dims: 11x7x5

148
Heathkit SB-620 Scanalyzer
Heathkit SB-620 Scanalyzer in good working as well as cosmetic condition, as shown. Uses 455 KHz IF. Approx. Weight: 10 lbs. Approx. Dims: 11x10x8

149
Galaxy CW Monitor
Galaxy CW Monitor in good working condition. Some corrosion to the case, as shown. Approx. Weight: 1 lb. Approx. Dims: 5x3x7

150
Galaxy 300~ Filter F-3
Galaxy 300~ Filter F-3. There is some corrosion to the case, as shown. This unit appears to be non-operational. Approx. Weight: 2 lbs. Approx. Dims: 7x4x3

151
Staco 3PN1010 Variable Autotransformer
Staco 3PN1010 Variable Autotransformer in good working condition, as shown. Approx. Weight: 11 lbs. Approx. Dims: 7x6x5

152
B&K 282 Digital Multimeter
B&K 282 Digital Multimeter in good working condition, as shown. Approx. Weight: 4 lbs. Approx. Dims: 10x9x4

153
GE Electronic Tubes Advertising Display
GE Electronic Tubes Advertising Display. In very good cosmetic condition, as shown. Only the two tubes included, are pictured. Approx. Weight: 5 lbs. Approx. Dims: 18x9x2

154
Two Eimac 3-500Z Electron Tubes NIB
Two Eimac 3-500Z Electron Tubes NIB, NOS. As shown. Unopened. Codes on top of both boxes are stamped 7837. Approx. Weight: 1.5 lbs. each Approx. Dims: 11x7x7 each

155
4-1000A Transmitting Tube
4-1000A Transmitting Tube. In good condition, appears to have been used, filaments are good! Approx. Weight: 2 lbs. Approx. Dims: 9 x 5 inch dia.

156
Western Electric KS-15750-L1 Tube Tester
Hickok Western Electric KS-15750-L1 Tube Tester. This tester is in good overall cosmetic condition, and built like a tank! That being said, you can set the line/zero it, however, it does not indicate bias voltage nor does it indicate tube test result...

157
Eico 625 Tube Tester
Eico 625 Tube Tester in good overall cosmetic as well as working condition. Tested with known good tube. Approx. Weight: 9 lbs. Approx. Dims: 13x10x4

158
Precision 900 Tube Tester
Precision 900 Tube Tester. You can set the line adjust but this tester will not indicate any tube measurements. Approx. Weight: 13 lbs. Approx. Dims: 15x13x6

159
Precision 612 Tube & Battery Tester
Precision 612 Tube & Battery Tester. You can set the line adjust but this tester will not indicate any tube measurements. Approx. Weight: 14 lbs. Approx. Dims: 15x13x6

160
Triplet 3413-A Tube Tester
Triplet 3413-A Tube Tester. Nice looking tester, however, the meter needle is bent, thus, no testing was performed. The unit powers up and draws about 11W at 117VAC. Approx. Weight: 15 lbs. Approx. Dims: 15x12x7

161
Hickok 600A Tube Tester
Hickok 600A Tube Tester in good overall cosmetic condition. The unit does zero with no problems, and testing is fine, however, some calibration may be needed, as a few tubes tested somewhat low, compared to a calibrated TV-7. Power consumption is 24...

162
Jackson 636C Tube Tester
Jackson 636C Tube Tester in good overall cosmetic as well as working condition. Meter line adjust OK, as well as testing a few known good tubes. Power consumption is 3W at 117VAC. Approx. Weight: 12 lbs. Approx. Dims: 13x10x7

163
PA Amplifier, maker unknown
PA Amplifier, maker unknown. This cool looking unit uses a single ended 6V6 and is in working condition. With carry case and all of the accessories shown. The chrome and red marking may indicate that it is an RCA model. Approx. Weight: 29 lbs. Appro...

164
Heil Gold Elite Microphone
Heil Gold Elite Microphone in good working condition. Includes 8-pin DIN cable for use with ICOM rigs, i.e., IC-7410, IC-7600, etc. Approx. Weight: 2 lbs. Approx. Dims: 11x5x3

165
Palstar SP30B 5 Watt Communication Speaker
Palstar SP30B 5 Watt Communication Speaker in good working condition. Cosmetic condition is very good, as shown. Approx. Weight 2 lbs. Approx. Dims: 7x7x5

166
Electro Voice 630 Microphone
Electro Voice 630 Microphone in good working and looking condition. 4-pin DIN connector included with cable. Approx. Weight: 5 lbs.

167
Astatic D-104 Microphone & G Stand
Astatic D-104 Microphone & G Stand. In good working condition. No connector, just a connector housing attached. The chrome is very good to excellent, the base does show some scuffs/scratches. Approx. Weight: 3 lbs.

168
Astatic D-104 Microphone & G Stand
Astatic D-104 Microphone & G Stand in good working and looking condition. Chrome and base look great! No connector included. Approx. Weight: 3 lbs.

169
Astatic D-104 Microphone & G Stand
Astatic D-104 Microphone & G Stand. Another nice example of this classic mic. In good working as well as looking condition. Two pin mic connector included. A few minor scuffs are present on the back side of the mic head. Approx. Weight: 3 lbs.

170
Shure 444 Microphone
Shure 444 Microphone in good working condition with a 3/16' PL-68 phono (Collins) connector. The head/neck of the mic extend and contract with no issues. Cosmetically, in fair/good condition with some scrapes/scratches and the left rear corner plas...

171
Electro-Voice 619 Dynamic Microphone
Electro-Voice 619 Dynamic Microphone in very good overall working and looking condition! Includes 1/4' stereo phono connector. Approx. Weight: 3 lbs.

172
Turner 256 Hi-Z Crystal Microphone
Turner 256 Hi-Z Crystal Microphone. This mic is in good to very good cosmetic condition, however, there is no output. No connector is included. Approx. Weight: 3 lbs.

173
Electro-Voice 623 Microphone
Electro-Voice 623 Microphone in good to very good overall cosmetic condition, however, there is no output. Cord/connector not included. The base is a model 763D and is heavy cast metal. Approx. Weight: 5 lbs.

174
Heil HS-2 Ergonomic Hand Switch
Heil HS-2 Ergonomic Hand Switch in good working condition with original box. Approx. Weight: 1 lb. Approx. Dims: 7x4x2

175
Astatic 200 Crystal Bullet Microphone
Astatic 200 Crystal Bullet Microphone in good working condition. Some scuffs and scratches, but for a 1940's era mic, in good cosmetic condition. No connector is included. Approx. Weight: 2 lbs.

176
Turner Plus Three Microphone
Turner Plus Three Microphone in good working as well as cosmetic condition. With 4-pin DIN connector. You will need to supply a 9V transistor battery. Approx. Weight: 3 lbs.

177
Hy-Gain T2X Tailtwister Control, Rotor, Cable
Hy-Gain T2X Tailtwister Control, Rotor, Cable. The rotor and controller have been well used, and was removed from use from in working condition. We did not independently test this unit. The screw terminals on the bottom of the unit are corroded and o...

178
Yaesu NC-8 AC Power Supply & Charger
Yaesu NC-8 AC Power Supply & Charger. Powers up, but no further testing was done. Approx. Weight: 4 lbs. Approx. Dims: 7x7x4

179
ICOM IC-290H Transceiver
ICOM IC-290H Transceiver in fair, used cosmetic condition. This unit produces about 20W power output. Receive sensitivity is about 0.7 uv. Mic, power cord and manual included. Approx. Weight: 8 lbs. Approx. Dims: 9x7x3

180
ICOM IC-25A Transceiver
ICOM IC-25A Transceiver in fair, used condition cosmetically. This unit produces about 18-20W power output. However, there is no audio output. Mic and manual included. Approx. Weight: 5 lbs. Approx. Dims: 9x6x2

181
Ray Jefferson 789 Marine VHF/FM Transceiver
Ray Jefferson 789 Marine VHF/FM Transceiver. Powers up, but no further testing was done. Approx. Weight: 4 lbs.

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Jan 2
Kansas City, MO



Sponsored Links

Ham Radio, Vintage Audio & Tube Radios!

Schulman Auction & Realty, LLC

Schulman Auction & Realty, LLC


Contact:
Phone:
Sale Location
404 NE 41st St. BLDG #2
Kansas City, MO 64116
Sale Dates and Times
Sale Terms and Conditions
TERMS AND CONDITIONS ONLINE ONLY AUCTION! These are the Terms and Conditions of Sale for this online auction. They consist of this introduction and 27 (twenty-seven) numbered paragraphs and subparagraphs that outline the relationship between you ("the Bidder") and Schulman Auction & Realty, LLC, ("the Auctioneer"). Throughout these Terms and Conditions, the terms "auctioneer," "we," "us," and "our" will refer to the Auctioneer, and the terms "you" and "your" will refer to the Bidder. If you want to bid in this online auction, you will first have to read these Terms and Conditions. And by placing a bid, you agree that you have read the Terms and Conditions and understand the terms are binding on both you and on the Auctioneer, and all parties will be expected to abide by the Terms and Conditions if any issues arise in connection with this sale. Please read these Terms and Conditions carefully! They contain important information about the online auction itself and your rights and responsibilities as a bidder. 1. Registration: To gain access to this online auction, you will need to register and obtain a bidder number. You must be eighteen years old or older to register. You agree that all information that you provide during the registration process will be true and accurate. You will be banned from participation in the Auctioneer's auctions indefinitely should you provide any false information during the registration process. 2. Credit Card: In order to register for this auction, you will need a working Visa, MasterCard, Discover, or American Express card associated with your account. This card will be automatically charged at the end of the auction, if you are a winning bidder. NOTE: If this is your first time registering for one of our auctions with a credit card, your card may be temporarily charged a small fee of $1 or less for authentication purposes. This charge WILL be REMOVED after your card is successfully authenticated. None of your credit card information is stored with the auctioneer. 3. Bidder's Duty to Update Information: Whether you are a new or returning bidder, you agree that if any of the information associated with your bidder number - including contact information and credit card information - changes at any time prior to, during, or after this sale, you will notify the Auctioneer of the change by updating your bidder profile. 4. Conduct of Sale: All bids, and credits in this sale will be made in United States Dollars (USD). You agree not to use any hardware, software, program, or system that would interfere with the orderly conduct of this sale. You further agree not to copy, reproduce, or publically display any content from the Auctioneer's website without first obtaining written permission from the Auctioneer. 5. Bidder's Duty to Inspect and Investigate: You acknowledge that the Auctioneer is providing you with the opportunity to inspect the items being offered for sale in this auction. The Auctioneer strongly encourages you to attend the scheduled inspection for this auction. If you choose not to attend the scheduled inspection and are in doubt about the condition, completeness or suitability of a given item, please bid accordingly. a. Photographs and Descriptions: The Auctioneer regularly posts item descriptions and photographs to aid bidders in the bidding process, and we make every effort to ensure that the descriptions and photographs that we post accurately represent the items being offered for sale. In some photographs, multiple items may appear to be joined as a single unit, however you should not assume that a lot consists of more than one item simply because various items appear connected or are featured in the same photograph. Also understand that, on occasion, the wrong photograph may be displayed for a given item. At all times, you are bidding on items as they are described on this website, not as they appear in any photograph. b. Bid Wisely: We want everyone to be pleased with their purchases and most will. However, when you bid on the wrong item or decide an item is not suited for your intended use, our clients will not assume the cost of your mistakes. You agree that your failure to inspect or otherwise become fully informed about the items offered for sale in this auction will not be grounds for a refusal to pay amounts due to the Auctioneer nor for any claim against the Auctioneer. 6. WARRANTY AND CONDITION OF ITEMS SOLD: ALL LOTS AND ITEMS ARE SOLD AS IS, WHERE IS, WITH ALL FAULTS, AND WITH NO EXPRESS OR IMPLIED WARRANTIES. NO ACTION TAKEN BY THE AUCTIONEER OR ITS AGENTS IS INTENDED TO CREATE ANY EXPRESS OR IMPLIED WARRANY AS TO ANY LOT OR ITEM IN THIS SALE. THE AUCTIONEER SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE, CONFORMITY WITH ENVIRONMENTAL LAWS OR REQUIREMENTS, NON-INFRINGEMENT, ACCURACY, TITLE, OR ANY OTHER WARRANTY. IT IS BELIEVED THAT ALL DESCRIPTIONS ARE ACCURATE. DESCRIPTIONS ARE NOT GUARAUNTEED. 7. When You Have Been Outbid: If you are outbid during the course of this auction, you will be notified by email, if you have chosen this option when you registered. You can see if you are high bidder at any time using the "Watch List" feature; items which you have put on the Watch List will show the bidder name of the high bidder. 8. Reporting Bidding Errors: You should carefully review every bid you choose to make before submitting that bid. The Auctioneer will not automatically assume that any bid, even a bid that increases your own lower bid, was made in error. If you mistakenly increase your own bid at any time during the auction, or make some other bidding error (e.g. placing your bidder number in the price field), you must immediately contact the Auctioneer by email at david@dschulmanassociates.com. Reports of bidding errors must be made via e-mail; phone reports will not be accommodated. 9. Timeliness of Bidding Error Reports: If you make a bidding error during this auction, you must identify and report the error before the auction begins to close. The Auctioneer will not undo bidding errors reported after the auction has begun to close. 10. Bidder's Duty to Report Fraud: You are responsible for all bids made from your account. If you believe that an unauthorized person has gained access to your account, you must notify the Auctioneer immediately by sending an e-mail to david@dschulmanassociates.com. You must also report the incident to the relevant law enforcement authorities and send the Auctioneer a copy of any resulting police report. You understand and agree that if you do not promptly report any suspected fraud to the Auctioneer and to the relevant law enforcement authorities, you will be held personally responsible for all purchases made using your account and bidder number. 11. Changes in Circumstance: All aspects of this auction are subject to change without notice. The Auctioneer reserves the right to, at any time: (1) add or remove items from the auction, (2) split or combine lots, (3) add minimum bids or reserve prices, (4) cancel, suspend, extend or reschedule the sale of an individual item, lot, auction, and/or auction event, (5) make changes to the auction's closing, inspection, or removal times, or (6) take any other action the Auctioneer deems necessary to effect the fair conduct of this sale or protection of buyers', sellers', or other parties' interests. In the event a seller withdraws an item from this auction prior to the close of the auction, the Auctioneer may leave the item on the catalog and buy the item back on behalf of the seller to establish the Auctioneer's earned commission and the buyer's premium due to the Auctioneer from the seller. 12. Closing: the Auctioneer's online auctions are designed to mimic traditional "live" actions. For this reason, this auction will have a staggered, dynamic closing. a. Staggered Closing: This online auction will automatically begin to close at a rate of 3 items per minute. Items' closing times may be extended past their scheduled closing time, however, as a result of the Auctioneer's dynamic closing feature. b. Dynamic Closing: The closing time of an item is automatically extended an additional 3 minutes whenever a bid is placed within the 3 minutes leading up to an item's scheduled closing time. 13. Winning Bids: If you place a bid in this sale, and your bid is determined to be the winning bid, you become obligated to pay for the item(s) that you have won at the price you gave as your bid. a. Notification: If you end up placing one or more winning bids in this auction, the Auctioneer will contact you by e-mail to let you know which items you have won. This e-mail notification will be the only contact you receive from the Auctioneer about your winning bids; this means that you are responsible for checking your e-mail following the close of the auction to determine what items you have won. If you do not receive an e-mail identifying you as a winning bidder, it is because the Auctioneer has no record of your having placed a winning bid. b. Bid Inquiries: If you believe that you placed a winning bid, but do not receive an e-mail, you must notify the Auctioneer by sending an e-mail to david@dschulmanassociates.com explaining your situation by 9:00am on the day after of the auction has closed. You agree that the Auctioneer will be the sole authority regarding the identification of winning bids. 14. Payment: At the conclusion of this auction the credit card you used to register for this auction, will automatically be charged for your invoice amount. a. Chargebacks Prohibited: You agree that you will accept all charges placed on the credit card associated with your account, and you agree that you will not charge back any amount that is charged s to your credit card. You agree that this provision applies equally to amounts charged in connection with any items you have won and any costs or fees discussed in Paragraphs 16-18 of these Terms and Conditions. 15. Buyer's Premium: A 10% buyer's premium is added to every purchase. This means that if your winning bids add up to $100, you will be charged $110 at checkout, plus any applicable sales tax. 16. Default and Resale: You agree that if, after being declared the winning bidder, you fail to pay for any item that you have won for any reason, your account will be declared in default. If you still refuse to pay for any item after being notified of your account's being in default, you agree that the Auctioneer will have the right to immediately resell your item, and you further agree to pay (1) any cost associated with the resale and (2) any deficiency between your original purchase price and the resale price. 17. Picking Up/Shipping Your Items: IF you are picking up your items, you are solely responsible for the safe and timely pick-up and removal of any items you may win at this auction. IF you are having your items SHIPPED due to being located out of the area, see section "a" below. If you are unable to safely pick up and remove your items during the item pick up times that have been scheduled for this sale, PLEASE DO NOT BID. The Auctioneer does not hold items beyond the published removal times. The Auctioneer will not issue you a refund if you are unable to pick up and safely remove your items during the published removal times. a. SHIPPING: If shipping out of the area is required, we work with a local UPS franchise that will pickup your items the week following the auction. Shipping charges will be billed to you separately, by the shipper. Your name and phone number, along with a copy of your paid invoice and items won, will be given to the shipping company so that they may contact you to arrange shipping and payment. b. Bidder's Duty to Remove Items Safely: Again, you are solely responsible for the safe pick-up, removal, and transportation of your items. You agree that the pick-up, removal, and transportation of your items will be solely at your expense and at your risk. You further agree that you will be responsible for any damage that you or any of your agents cause during any inspection or removal period, and also agree that the credit card associated with your online account will be charged for any expenses incurred and/or repairs necessary as a result of any damage that you cause. c. Release Upon Presentation of Receipt: You understand and agree that the Auctioneer will release your items only after you or your agent presents a sales receipt generated by the Auctioneer stating that your account is paid in full. You further understand and agree that it is your duty to ensure that any agent picking up items on your behalf has a copy of your paid sales receipt to present at the pick-up location. You explicitly authorize the Auctioneer to release your items to any person in possession of your paid sales receipt. No item will be released to any person unless that person presents a paid sales receipt listing the item in question. d. Abandonment: You understand and agree that any item that you do not pick up during the published removal times will be considered abandoned. You understand and agree that you will be charged a reasonable fee for the storage, removal, and/or disposal of any item that is considered abandoned. 18. Disposal of Unclaimed Items: In the event you refuse to pay for or abandon any item that you win at auction, the Auctioneer will have the option of reselling, removing, storing, or disposing of the unpaid or abandoned item. You understand and agree that you will be personally responsible for all deficiencies including all legal, collection, transportation, and storage expenses associated with your delinquent account and/or abandoned items. In the event of resale, you agree to pay any cost associated with the resale as well as any deficiency between your original purchase price and the resale price. 19. Non-Delivery: In the unusual event that an item has been grossly misrepresented or is unavailable for pickup during the published removal times, you must immediately notify the Auctioneer's onsite staff of the problem and file a claim for non-delivery within twenty-four hours. You understand and agree that if you fail to make a claim for non-delivery within twenty-four hours of your discovering the problem, your claim for non-delivery will not be honored. Claims for non-delivery may be filed by replying to the e-mail that informed you of your winning binds. Your claim must fully describe the nature of the problem that you have identified. 20. Claims and Choice of Venue: Any claim or controversy out of or relating to these Terms and Conditions, or to any breach thereof, will be settled either (1) in Clay County, Missouri's Small Claims Court, if the claim in question amounts to less than $5,000, or (2) by means of arbitration in accordance with the Commercial Arbitration Rules of the American Arbitration Association, if the claim in question amounts to more than $5,000. In the event of arbitration, judgments upon the award rendered by the arbitrator may be entered by any court having jurisdiction. You agree that all claims will be litigated or arbitrated on an individual basis, and will not be consolidated with any claim made by another party. Venue in every case will be Clay County, Missouri. You agree that any judgments awarded may be applied to and collected from you personally or corporately. Should any party file an action contrary to this paragraph, the counterparty may recover reasonable legal fees and costs. Further, if you bring a claim against the Auctioneer and do not prevail, you agree that you will reimburse the Auctioneer for all reasonable legal fees and costs. 21. Interim or Preliminary Relief: Notwithstanding the contents of Paragraph 22 of these Terms and Conditions, you agree that the Auctioneer may seek interim or preliminary relief in a court having jurisdiction in order to protect any rights or property that the Auctioneer may have pending arbitration or litigation. 22. Liability: In all cases, the Auctioneer's liability, and the liability of the seller of the items in this auction, will be limited to the refund of your purchase price. The Auctioneer will not be liable for any amount in connection with the postponement or cancellation of this auction, or the withdrawal of any item or lot from this auction. In no event will the Auctioneer be liable for lost profits or any special, incidental, or consequential damages arising out of or in connection with this auction or any related sale or transaction. a. No Liability for the Acts of Third Parties: The Auctioneer is not responsible for any action taken by any seller, bidder, or other third party before, during, or after this auction. b. No Liability for Site Malfunction: You understand that this auction is online-only, and so relies on devices and programs that may malfunction without warning. You agree that the Auctioneer will not be liable for any error or inconvenience that may be the result of such a malfunction. You further understand and agree that the Auctioneer may void or suspend any sale, or resell any item, if the Auctioneer determines a transaction to have been affected by any site malfunction. 23. Indemnification: You agree to indemnify, defend, and hold harmless the Auctioneer and its employees, officers, owners, affiliates, agents, and representatives from and against any claims, losses, damages, liabilities, judgments, fees, costs, and expenses, including reasonable legal fees and costs, related to, arising from, or associated with you, your agents or representatives including, but not limited to, personal injury or property damage caused at any sales site or during removal or transportation of items won at auction, any dispute with another bidder, or any violation of these Terms and Conditions. 24. Limitations: These Terms and Conditions do not, nor are they intended to create any agency, partnership, joint venture, employer-employee, or franchisor-franchisee relationship. These Terms and Conditions cannot be altered except in writing by the Auctioneer. 25. Severability: If any term, provision, paragraph, condition, or other portion of this agreement, or the application of these, to any person, place, or circumstance, is held to be invalid, unenforceable, or void, the remainder of this agreement and such term, provision, covenant or condition as applied to other persons, places and circumstances will remain in full force and effect. 26. Governing Law: These Terms and Conditions will be governed by and construed under the laws of the State of Missouri. 27. Entire Agreement: These Terms and Conditions contain our entire agreement and supersede any prior oral or written agreements relating to the same subject matter.
Listing Details
This auction features some fantastic gear, including a Henry 8K Ultra and a 4K Ultra, as well as a Collins 30S-1, and Elecraft KPA-500 amplifier. A FlexRadio FLEX-6600 and Maestro Control Console, as well as an ICOM IC-7600, IC-7410, IC-R9000 and a Kenwood TS-450S. A Collins S-Line station and a Hallicrafters Cyclone SR-400A and PS-500A supply will also be featured. Of course there are many other pieces of Drake, Hallicrafters, Swan and Heathkit included, along with related items. Test equipment includes some tried and true gear from HP such as a 3585A and 8590A spectrum analyzer and a 5343A microwave frequency counter. There is also a Tektronix 7613 scope with the 7L18 spectrum analyzer module and many other pieces of test equipment. For our audio enthusiasts we'll be selling gear from the local estate of "Jaymanaa" in this auction as well as the next few upcoming sales. Jay was a frequent contributor to AudioKarma.org. Included will be a Conrad Johnson amplifier, Revox B215, B225 and B285 and many other items from H.H. Scott, Sherwood, Dynaco/Dynakit and Klipsch.

1
PAYMENT!
At the conclusion of this auction, the credit card you used to register with will automatically be charged for your purchases. A PAID invoice will be emailed to you. Please be sure that the card you used to register has sufficient funds/credit limit...

2
BIDDING INFORMATION!
Bidding is pretty simple, particularly if you've bid in an online auction before, but here's a quick rundown on some features that may be unfamiliar: Each lot in the auction is scheduled to close approximately 20 seconds apart. For example, Lot 1 is...

3
SHIPPING!
If you require shipping, please cut and paste the following link into your browser for specific details you need to know about our shipping process: https://www.schulmanauction.com/vintage-electronics/auction-shipping/

4
PREVIEW / PICKUP!
PLEASE NOTE OUR NEW ADDRESS BELOW Previews and pickups will be located at: One block north of our previous location. It's the commercial building behind the home. 404 NE 41st Street Kansas City, MO 64116 One block north of our previous location. ...

5
EQUIPMENT TESTING!
When possible, we do our best to test the equipment we sell so that you will know exactly what you are bidding on. That being said, we perform basic tests such as overall power consumption, receiver sensitivity, transmitter power output, etc. Depend...

6
Henry 8K Ultra Linear Amp/Late Version
Henry 8K Ultra Linear Amp/Late Version, Well, here's one you don't see every day. This is a rare beast, especially in the condition it's in, both cosmetically and working. You can tell that the previous owner took very good care of his gear. This amp...

7
Henry 4K Ultra Linear Amplifier, 220V
Henry 4K Ultra Linear Amplifier. Here's another gem of an amp, owned by the same individual that took such great care of the 8K, in the previous lot. With its' single 8877 in a grounded grid configuration, this amp produced over 2200W carrier output...

8
Collins 30S-1 Linear Amplifier, 220V
Collins 30S-1 Linear Amplifier. A very nice looking as well as working piece of Collins gear! With only 45W of drive, carrier output was approximately 925W. That's one hot tube! The amp is wired for 220V with a twist-lock plug, as shown. (SSB positi...

9
Elecraft KPA500 Amplifier
Elecraft KPA500 Amplifier. Very nice looking amplifier in great working condition. With 40W of drive, approximately 451W output was achieved on all bands. Includes manual, power cord and extra fuses. s/n: 2047 Approx. Weight: 26 lbs. Approx. Dims:...

10
FLEX 6600 Transceiver & Maestro Console
FLEX 6600 Transceiver & Maestro Console. This is one fantastic SDR! For those of you familiar with FLEX, you know what we're talking about. The 6600 itself is working well using one of the latest or the latest (at the time of writing this descripti...

11
ICOM IC-7600 Transceiver
ICOM IC-7600 Transceiver. Very nice looking and sounding rig. Very lightly used and in great shape! Receive sensitivity is approximately 0.3 uv on all bands and CW carrier output is about 95W+ on all bands. Includes mic, DC power cord, hand mic and...

12
ICOM IC-7410 Transceiver
ICOM IC-7410 Transceiver. Another very nice looking and working ICOM rig! Receive sensitivity is approximately 0.2 uv on all bands and CW carrier output is 95W+ on all bands. DC power cord and hand mic included. s/n: 02002313 Approx. Weight: 29 l...

13
ICOM PS-126 Power Supply
ICOM PS-126 Power Supply works and looks great. Tested OK with both the IC-7600 and IC-7410 in previous lots, at full power. Approx. Weigth: 6 lbs. Approx. Dims: 9x5x4

14
ICOM ID-51A Transceiver, Charger & Software
ICOM ID-51A Transceiver, Charger & Software. This dual bander appears to have been never used, as the plastic film is still present on the face of the display. RT Systems programming software WCS-D51 and BC-202 Rapid Charger included. Approx. Tota...

15
Kenwood TS-450S HF Transceiver
Kenwood TS-450S HF Transceiver. This rig is in great cosmetic as well as working condition. Includes yellow "Storm Case" similar to Pelican cases. Receive sensitivity is 0.1 uv on all bands, and CW carrier output is approximately 85W on all bands. ...

16
Collins 75S-3B Receiver, WE
Collins 75S-3B Receiver. This radio is in good to very good cosmetic condition with only a few minor scuffs/scratches. The trim ring is not yellowed. Receive sensitivity is approximately 0.5 uv on all bands and all functions are operational. The 2....

17
Collins 32S-3 Transmitter, WE
Collins 32S-3 Transmitter in good working condition with approximately 65 ~ 90W CW carrier output. s/n 13685 Approx. Weight: 16 lbs. Approx. Dims: 14x13x8

18
Collins 516F-2 Power Supply
Collins 516F-2 Power Supply in good working condition. As you can see, it was recapped at some point in the past, and solid state rectifiers are being used. s/n 13039 Approx.Weight: 31 lbs. Approx. Dims: 9x7x6

19
Collins 312B-4 Station Control, WE
Collins 312B-4 Station Control in good working and cosmetic condition. Trim ring is not yellowed. There are some minor scuffs and scratches to the cabinet. s/n 55846 Approx. Weight: 6 lbs. Approx. Dims: 12x10x8

20
Hallicrafters Cyclone III SR-400A & PS-500A
Hallicrafters Cyclone III SR-400A Transceiver & PS-500A Power Supply. Here's one you don't see very often, especially in this shape! Cosmetically, there are some scuffs/scratches and a bit of paint loss to the cabinet, but overall very nice condition...

21
Yaesu FT-101EE SSB Transceiver
Yaesu FT-101EE SSB Transceiver. This rig is in overall good to very good cosmetic condition. Receive sensitivity ranges from 0.2 - 3.0 uv on all modes. Power output is approximately 100W on 80-40M, 80W on 20M and 40W on 15-10M. There is no RX/TX on ...

22
ICOM IC-732 Transceiver
ICOM IC-732 Transceiver in need of a bit of work. Receive sensitivity is about 30.0 uv, and there is no TX output. The PLL does not lock on 160M-40M, and is likely caused by a problem with VCO#1 of the main loop. The set does lock on 10M-30M, however...

23
Yaesu FT-107M Transceiver
Yaesu FT-107M Transceiver. Nice looking rig that you just don't see every day. Receive sensitivity is 0.1 uv on all bands. CW carrier output is approximately 100W on 160M-12M, and 60W on 10M. All other features appear to be OK. There is NO narrow C...

24
ICOM IC-R9000 Receiver, w / NEW Display
PLEASE NOTE, this item will be shipped from Las Vegas, NV for a flat rate of $125 to anywhere in the Continental US. It will be added to your final invoice. If you live elsewhere or would like to pick this radio up in Las Vegas, please contact the au...

25
Hallicrafters SX-100 MARK 2 Receiver
Hallicrafters SX-100 MARK 2 Receiver in overall good cosmetic condition. Receive sensitivity is about 3.0 uv and power consumption is 70W at 117VAC. Approx. Weight: 40 lbs. Approx. Dims: 19x10x9

26
Hammarlund HQ-170A Receiver
Hammarlund HQ-170A Receiver in very good to excellent cosmetic as well as working condition. All functions work well, and receive sensitivity is about 0,3 uv on 160~10M, and 0.7 uv on 6M. Power consumption is 93W at 117VAC. The clock is in working c...

27
Drake R-4B Receiver
Drake R-4B Receiver. Cosmetically, this unit does have some scuffs/scratches to the cabinet, as shown, and there is a slight downward bend to the rear of the case. The front panel is in very good to excellent condition, however. All functions are wo...

28
Drake R-4C Receiver
Drake R-4C Receiver in good looking as well as operating condition. Receive sensitivity is about 0.7 uv or better on all bands. There is no CW .25 filter or calibrator, present. However, the CW 1.5, and .5 filters are installed, as shown on the back ...

29
Drake R-4C Receiver
Drake R-4C Receiver in good cosmetic condition with approximately 1.0 uv or better receive sensitivity on all bands. All functions do appear to work, however, the controls are noisy/dirty and will need some cleaning and TLC. Also, please note the f...

30
Drake T-4XC Transmitter
Drake T-4XC Transmitter in good working and looking condition. Works well on all bands with about 100W+ CW carrier output. This unit was used to the test the L-4B amplifier, also found in this auction. Approx. Weight: 14 lbs. Approx. Dims 13x11x6

31
Drake T-4XC Transmitter, parts or repair
Drake T-4XC Transmitter for parts or repair, non-operational. Excessive current draw and smoke! Approx. Weight: 14 lbs. Approx. Dims 13x11x6

32
Drake MS-4 Speaker/AC-4 PS
Drake MS-4 Speaker and AC-4 Power Supply. Works well with T-4XC at 100W output. Approx. Weight: 24 lbs. Approx. Dims: 12x11x6

33
Drake MN-2000 Matching Network Antenna Tuner
Drake MN-2000 Matching Network Antenna Tuner. Works well on all bands. As you can see in the photos, the band switch knob has been replaced. Approx. Weight: 15 lbs. Approx. Dims: 16x11x6

34
Drake W-4 Wattmeter
Drake W-4 Wattmeter. Nice looking meter, with a good meter movement, however, the meter will not read forward or reverse power. An ohmmeter was used to test the meter movement. Approx. Weight: 1 lb. Approx. Dims: 6x5x4

35
Drake L-4B Linear Amplifier & Power Supply
Drake L-4B Linear Amplifier and Power Supply. Some scuffs/scratches, but overall in good cosmetic shape. Wired for 220V, this Class B grounded grid amp, with its two 3-500Z's, produced about 472W CW carrier output with only 54W of drive. Approx. We...

36
Drake UV-3 Transceiver & PS-3 Supply
Drake UV-3 FM Transceiver & PS-3 Supply. Here's one you don't come across every day. The UV-3 transceiver is in working condition with the accompanying PS-3 supply. Receive sensitivity is approximately 0.5 uv on 2M, and 0.3 uv on 1.25M and 70cm. Pow...

37
Swan 1500Z Linear Amplifier
Swan 1500Z Linear Amplifier in very good cosmetic condition. With its pair of 572B's, this amp produced about 323W CW carrier output with 55W of drive. Approx. Weight: 40 lbs. Approx. Dims: 15x15x8

38
Hallicrafters S-118 Receiver
Hallicrafters S-118 Receiver in overall fair to good cosmetic condition. The cabinet looks great, but the brushed metal/chrome on the faceplate is scratched and scuffed, as shown. That being said, all functions work, and receive sensitivity is abou...

39
Hallicrafters S-214 Receiver
Hallicrafters S-214 Receiver. You don't see these every day. This solid state radio is in good condition with some scratches and scuffs. The telescoping antenna extends and retracts, but the screw on tip is missing. Receive sensitivity is about 3.0 ...

40
Hallicrafters SR-150 Transceiver
Hallicrafters SR-150 Transceiver in overall good cosmetic condition, as shown. The 28 MHz band is nonoperational in receive, all other bands are about 0.5 uv sensitivity. CW carrier output is about 14W on 3.5 MHz, 80W on 14 MHz, 60W on 21 MHz, and...

41
Hallicrafters SX-25 Super Defiant Receiver
Hallicrafters SX-25 Super Defiant Receiver in overall good cosmetic condition, both inside and out. This set will need a tune-up/alignment. Receive sensitivity is approximately 15.0 - 50.0 uv across the bands. Approx. Weight: 40 lbs. Approx. Dims:...

42
Hallicrafters SX-71 Receiver
Hallicrafters SX-71 Receiver in overall good cosmetic condition. The volume and sensitivity knobs are non-original, as shown. The switches/contacts on this set are dirty and will need some cleaning and lubricating. Receive sensitivity is about 15.0 ...

43
Hallicrafters HT-32 Mark 1 Transmitter
Hallicrafters HT-32 Mark 1 Transmitter in overall good cosmetic condition, both inside and out. CW carrier output was as follows: 40W on 80M, 7W on 40M and 11W on 20-10M. Power consumption was 176W idle, and about 277W during transmit, at 117VAC....

44
Hallicrafters R-48A Speaker
Hallicrafters R-48A Speaker in overall good cosmetic as well as working condition. Approx. Weight: 5 lbs. Approx. Dims: 14x9x7

45
Hallicrafters S-38C Receiver
Hallicrafters S-38C Receiver in overall good cosmetic condition. Receive sensitivity is about 2.0 uv. Power consumption is 28W at 117VAC. Approx. Weight: 10 lbs. Approx. Dims: 14x9x7

46
Hallicrafters/Northrop HT-2A HF/VHF Radio
Hallicrafters/Northrop HT-2A HF/VHF Radio, handheld. There is static heard from the speaker, however, not TX/RX. The factory repair label indicates 37.525 MHz. This is a 12VDC unit. According to the internet, these radios were used by civilians dur...

47
Hallicrafters PS-150-12 Power Supply
Hallicrafters PS-150-12 Power Supply for the SR-150 to be run from a 12VDC source. All voltages test OK. 2A idle current. Approx. Weight: 7 lbs. Approx. Dims: 11x7x4

48
Johnson Viking Adventurer Transmitter
Johnson Viking Adventurer Transmitter in overall good cosmetic condition. However, this rig does not produce any TX out. Power consumption is 100W at 117VAC. Approx. Weight: 11 lbs. Approx. Dims: 11x9x8

49
RME 4004 Converter
RME 4004 Converter, as shown. The line cord is bad and will need to be replaced. No further testing done. Approx. Weight; 6 lbs. Approx. Dims: 8x7x6

50
RME 4004 Converter
RME 4004 Converter. The filter caps will need to be replaced in this unit. Power consumption was 20W at 117VAC. Approx. Weight: 6 lbs. Approx. Dims: 8x7x6

51
Heathkit HW-30 Twoer Transceiver
Heathkit HW-30 Twoer Transceiver in overall fair to good condition. As you can see, the Heahtkit logo is missing on the front plate. This unit has bad filter caps, and thus, non-operational. Power consumption was 90W at 117VAC. The crystal in this se...

52
Hallicrafters HT-1 HF/VHF Radio
Hallicrafters HT-1 HF/VHF Radio, handheld. Static is heard, but no TX/RX. Frequency unknown. According to the internet, these radios were used by civilians during the Vietnam war to contact US troops. It was known as a "village radio" that operates 3...

53
Hammarlund CB-212 Transceiver
Hammarlund CB-212 Transceiver. In fair to good cosmetic condition with mic. The DC vibrator is frozen. No RX/TX. Channels are 1, 6, 9, 11, 16 and 18. Approx. Weight: 11 lbs. Approx. Dims: 12x7x6

54
Heathkit HW-20 Daystrom Transceiver
Heathkit HW-20 Daystrom Transceiver in overall good to very good cosmetic condition. There is no TX/RX, but it is getting B+ since the regulator tube is glowing. Power consumption is 40W at 117VAC. Approx. Weight: 27 lbs. Approx. Dims: 15x11x7

55
Heathkit HW-32A SSB 20M Transceiver
Heathkit HW-32A SSB 20M Transceiver in good working as well as cosmetic condition, as shown. Approximately 80W carrier output and 0.5 uv receive sensitivity. There is no crystal calibrator installed. Approx. Weight: 12 lbs. Approx. Dims: 13x11x7

56
Heathkit HW-32A SSB 20M Transceiver
Heathkit HW-32A SSB 20M Transceiver in good working as well as cosmetic condition, as shown. Approximately 60W carrier output and 0.5 uv receive sensitivity. The crystal calibrator is installed. Approx. Weight: 12 lbs. Approx. Dims: 13x11x7

57
Gonset Communicator
Gonset Communicator for parts only. As shown. Approx. Weight: 17 lbs. Approx. Dims: 11x10x9

58
Tempo Speaker
Tempo Speaker, model number unknown. This is a working unit. Please note that the speaker cord will need to be replaced. Also, cosmetically, the unit does have some scratches to the cabinet. Approx. Weight: 4 lbs. Approx. Dims: 8x7x7

59
Mobile Speaker, unmarked
Mobile speaker in working condition, but unmarked. As you can see, the label on the bottom right corner has fallen off. It is a black metal case. Approx. Weight: 3 lbs. Approx. Dims: 7x3x5

60
ReVox B215 Cassette Tape Deck
ReVox B215 Cassette Tape Deck in working condition, and very nice cosmetic shape. There are 4 brief videos showing functionality. In order they are FF, RW, REC and REC/PLAYBACK. Power cord is included. No remote for this unit. Approx. Weight: 20 l...

61
ReVox B285 Receiver
ReVox B285 Receiver. The tuner works, however, the amp is very quiet and distorted. Cosmetic condition is very good, as shown. Power cord includec. No remote for this unit. Approx. Weight: 32 lbs. Approx. Dims:; 18x14x6

62
ReVox B225 CD Player
ReVox B225 CD Player. Very nice looking unit with some scratches and scuffs to the cabinet, and a scratch to the front plexiglass. That being said, this unit does work, both channels. However, when we first turned it on, it did not track. After work...

63
Conrad-Johnson MV50 Amplifier
Conrad-Johnson MV50 Amplifier. One of the classics, here folks! A beautiful MV50 with only minor scuffs to the cabinet. The front panel looks great and 2 cover screws are missing. That being said, only the right channel is functional on this amp. Al...

64
H.H. Scott 222-B Stereo Amplifier
H.H. Scott 222-B Stereo Amplifier. This amplifier is in good overall cosmetic condition, with a few minor scuffs/scratches, as shown. Testing was performed using a signal generator, and both channels did work, and all other functions appeared to wor...

65
H.H. Scott 299 Amplifier
H.H. Scott 299 Amplifier in good overall cosmetic condition with some scuffs/scratches, as shown. This unit is missing it's tube compliment and a cover. Power transformer tests ok, and power consumption was 5W at 117VAC. Approx. Weight: 20 lbs. App...

66
Sherwood S-9000a Amplifier
Sherwood S-9000a Amplifier in overall good cosmetic condition with some scuffs/scratches, as shown. There does appear to be a power supply issue, perhaps filter caps needing replaced. With no signal, power consumption keeps climbing upon power up. ...

67
Sherwood S8000 FM-MX Receiver
Sherwood S8000 FM-MX Receiver in overall good cosmetic condition, as shown. No testing performed due to power cord being cut and missing fuse and holder. Note that there are no tubes in this unit. Approx. Weight: 33 lbs. Approx. Dims: 16x15x5

68
The Fisher 600 / TA-600 Amplifier
The Fisher 600 Amplifier with TA-600 chassis. This amp is in overall good condition with some scratches and scuffs, and the cover is missing, as shown. Channel A is non-operational, however, Channel B is working. Receive on AM/FM is ok. Power consu...

69
Technics ST-8600 Stereo Tuner
Technics ST-8600 Stereo Tuner in good overall cosmetic as well as working condition. Power consumption is 18W at 117VAC. Approx. Weight: 23 lbs. Approx. Dims: 19x13x7

70
Trio W-40 AM-FM Stereo Receiver
Trio W-40 (Kenwood) AM-FM Stereo Receiver in good overall cosmetic condition, with some minor scuffs and scratches to the cabinet. The front panel looks very good. Testing was performed using a signal generator, and both channels did work, and all o...

71
Sansui AU-919 Integrated Amplifier
Sansui AU-919 Integrated Amplifier in overall good cosmetic condition, with a few scuffs and scratches to the cabinet, however, the front panel looks very good. Testing was performed using a signal generator, and both channels did work, and all othe...

72
Bogen SRB 20 Stereo Amplifier
Bogen SRB 20 Stereo Amplifier. This unit does not include tubes or a cover. We did test for shorts and none found. No other testing was performed. Approx. Weight: 20 lbs. Approx. Dims: 17x14x5

73
Sherwood S-5500 III 80 Watt Amplifier
Sherwood S-5500 III 80 Watt Amplifier. In good overall condition with only a few scuffs/scratches to the cabinet. The cabinet is not attached to the chassis. We did test for shorts and none were found. Approx. Weight: 30 lbs. Approx. Dims: 14x14x5

74
Dynakit FM Tuner
Dynakit FM Tuner, no model number found. The power cord is cut, the left most knob is missing and there are no tubes or a bottom cover. The bottom left of the front panel is slightly bent. Approx. Weight: 8 lbs. Approx. Dims: 13x9x4

75
Dynakit PAS-2 Preamp
Dynakit PAS-2 Preamp. This unit does have some scratches/scuffs to the cabinet and front panel, and a small dent to the top of the cover. But overall fair/good cosmetic condition. Testing was performed using a signal generator, and both channels did...

76
Dynaco FM-5 Tuner
Dynaco FM-5 Tuner in good overall cosmetic condition, as well as working condition. Power consumption is 5W at 117VAC. Approx. Weight: 9 lbs. Approx. Dims: 14x9x5

77
Dynaco FM Tuner
Dynaco FM Tuner in overall good cosmetic condition with the bottom cover missing. This unit had the power cord cut and was not tested. Approx. Weight: 8 lbs. Approx. Dims: 13x9x5

78
Dynakit PAS-2 Preamp
Dynakit PAS-2 Preamplifier. Clean, both inside and out, with a few scuffs/scratches to the cabinet. No tube compliment. Appears to be original. Power consumption was 2.5W at 117VAC. Approx. Weight: 7 lbs. Approx. Dims: 13x9x5

79
Eico HF-85 Stereo Preamp
Eico HF-85 Stereo Preamp in overall good cosmetic condition with a few scuffs/scratches to the cabinet. Testing was performed using a signal generator, and both channels did work, and all other functions appeared to work as intended. As this is vint...

80
Radio Shack Dual 15 Band Equalizer
Radio Shack Dual 15 Band Equalizer in working condition. Approx. Weight: 7 bs. Approx. Dims: 20x12x1

81
Custom Built Audio Amp by "jaymanaa"
Custom Built Audio Amp by "jaymanaa". Jaymanaa was a frequent contributor to the AudioKarma website, where he assisted many in their trials and tribulations with various audio equipment. He also built a lot of custom audio amplifiers, of which this i...

82
Custom Built Audio Amp by "jaymanaa"
Custom Built Audio Amp by "jaymanaa". Jaymanaa was a frequent contributor to the AudioKarma website, where he assisted many in their trials and tribulations with various audio equipment. He also built a lot of custom audio amplifiers, of which this i...

83
Custom Built Audio Amp by "jaymanaa"
Custom Built Audio Amp by "jaymanaa". Jaymanaa was a frequent contributor to the AudioKarma website, where he assisted many in their trials and tribulations with various audio equipment. He also built a lot of custom audio amplifiers, of which this i...

84
(4) Various 2A3 Tubes
(4) Various 2A3 Tubes. Included are the following tubes and their test data. Testing was performed using a Dan Nelson calibrated TV-7/DU tester: Sylvania, 74/38 Raytheon, 60/38 KEN-RAD, 73/38 Tung-Sol, 72/38 Where 38 is the minimum good value, or 6...

85
(4) Tung-Sol 5881 Tubes
(4) Tung-Sol 5881 Tubes. Included are the following tubes and their test data. Testing was performed using a Dan Nelson calibrated TV-7/DU tester: Tung-Sol, 42/25 Tung-Sol, 40/25 Tung-Sol, 37/25 Tung-Sol, 36/25 Where 25 is the minimum good value, o...

86
(2) Sovtek 2A3 Gold Tubes
(2) Sovtek 2A3 Gold Tubes. Testing was performed using a Dan Nelson calibrated TV-7/DU tester, as follows: 71/38 and 72/38 Where 38 is the minimum good value, or 60%. No shorts or gas. They were also current matched by the manufacturer, as shown on...

87
Klipsch Heresy II Speakers
Klipsch Heresy II Speakers. These tried and true speaker are in working condition. They do appear to be vintage, so I'm guessing that rebuilt crossovers and a re-cone job may not be far off. Cosmetically, the cases do show some wear and exhibit som...

88
Pair of Vintage JBL Speakers
Pair of Vintage JBL Speakers, as shown. You can see that the horn/tweeter was removed and the 15" woofer remains. These are some hefty speakers and I would not recommend shipping them. They are in working condition. No model number was found on the u...

89
13 Tomiko & Keen Ocean Torodial Transformers
13 Tomiko & Keen Ocean Torodial Transformers. These are new. Included are: (10) Tomiko OPT-PP-KT66 (2) Tomiko OPT-300B (1) Keen Ocean TTO-11019-04 Approx. Weight, total: 52lbs.

90
MG HM-100& HT-500 Horns
MG HM-100& HT-500 Horns. As shown, all test OK. They are used. Approx. Weight: 7 lbs. total. Approx. Dims: 10.5 inches wide and 5 inches wide

91
Emerson CS320 Radio
Emerson CS320 Radio. This table top set is in fair condition cosmetically, with some scratches and scuffs and wear throughout, as shown. The band switch knob is missing. This is an Ingraham cabinet. Electrically, only static when tuning around the ...

92
Truetone 2718 Table Radio
Truetone 2718 Table Radio. Nice looking set, that does appear to have been repainted at some point in it's life. Electrically, the set draws about 26W at 115VAC. That being said the volume control is frozen and the tuning pointer is missing, or it ma...

93
Kolster 6-D Radio Receiver
Kolster 6-D Radio Receiver. Nice looking early (mid to late 1920's) TRF set will all x01A tubes included. Untested. Clean radio, both inside and out with only minor scuffs and scratches. Approx. Weight: 30 lbs. Approx. Dims: 19x12x11

94
RCA Victor 3-BX-671 Radio
RCA Victor 3-BX-671 Radio. Overall fair to good condition cosmetically. Power consumption was about 11W at 117VAC. The set did receive BCB stations very well, with a definite 60Hz hum present. No other bands were tested, however, the controls are dir...

95
Green Zenith R-512-F Table Radio
Green Zenith R-512-F Table Radio, in overall good cosmetic condition with no chips or cracks. The bottom cover is missing, as shown. This radio is in working condition, receives well and draws about 30W at 115VAC. Approx. Weight: 5 lbs. Approx. Dim...

96
Philco 48-214 Transitone Table Radio
Philco 48-214 Transitone Table Radio in good overall cosmetic as well as working condition. Power consumption was about 24W at 117VAC. Approx. Weight: 6 lbs. Approx. Dims: 14x8x7

97
Candle VMS-1218 Portable Radio
Candle VMS-1218 Portable radio, new in box, as shown. We left the packaging intact, and did not perform any testing. Approx. Weight: 3 lbs. Approx. Dims: 11x9x5

98
RCA B-411 Portable Radio
RCA B-411 Portable Radio. Nice looking radio in leather case. This unit is non-operational. Approx. Weight: 3 lbs. Approx. Dims: 8x7x3

99
Lafayette 99-3550L 4 Band Radio
Lafayette 99-3550L 4 Band Radio, as shown. In good working condition on all bands. Approx. Weight: 6 lbs. Approx. Dims: 13x11x6

100
RCA Cathedral Radio
RCA Cathedral Radio. Model number unknown. Looks like a 6 tube set. The audio amp works, however, there is no receive and/or static heard. The cabinet is quite rough, as shown. Some of the knobs are non-original. Power consumption is 68W at 117VAC....

101
Hewlett-Packard 5343A Frequency Counter
Hewlett-Packard 5343A Microwave Frequency Counter, in good working condition. Please note we were only able to test to 2.0 GHz. This counter has two ranges, 10 Hz to 500 MHz and 500 MHz to 26.5 GHz. Approx. Weight: 21 lbs. Approx. Dims: 20x9x5

102
Hewlett-Packard 8590A Spectrum Analyzer
Hewlett-Packard 8590A Spectrum Analyzer. This set is in good working condition. The photo shows a 750 MHz signal from our generator. The range is 10 KHz to 1.5 GHz. Approx. Weight: 31 lbs. Approx. Dims: 18x13x8

103
Tektronix 7613 Scope w/7L18 Module
Tektronix 7613 Oscilloscope with rare 7L18 Spectrum Analyzer Module, which ranges from 1.5 to 60 GHz. Please note we were only able to test this unit to 2.0 GHz. Shown, is the display with a 1.9 GHz signal. There are issues with the display freezing...

104
Hewlett-Packard 3585A Spectrum Analyzer
Hewlett-Packard 3585A Spectrum Analyzer, 20 Hz to 40 MHz. This is one beast of an analyzer. It does successfully display a signal, however, as you can see in the photos, the signal displayed is quite noisy (photo 2) compared to the same signal on o...

105
Hickok 5058A Variable Power Supply
Hickok 5058A Variable Power Supply in good overall cosmetic condition. AC output is in good working order, however, their is no DC output. Approx. Weight: 20 lbs. Approx. Dims: 9x9x7

106
Sico 76 C.R. Bridge & Signal Tracer
Sico 76 C.R. Bridge & Signal Tracer. This Superior Instruments Co., bridge and tracer is in good to very good cosmetic condition. However, the unit is non-operational, except for the fact that it draws about 10W when powered on at 117VAC. Includes p...

107
Heathkit Variable Voltage DC Power Supply
Heathkit Variable Voltage DC Power Supply. This regulated supply is in good working condition and appears to be accurate up to about 300VDC. Approx. Weight: 16 lbs. Approx. Dims: 13x8x8

108
Heathkit LG-1 Laboratory Generator
Heathkit LG-1 Laboratory Generator in good overall cosmetic condition. The front panel is very clean. This is a working unit, however, the output is distorted. We tested with a 50 ohm and 1 megohm load. Approx. Weight: 11 lbs. Approx. Dims: 13x10x8

109
Three Powerstats/Variacs - 116U, 216U
Three Powerstats/Variacs. There are 2, 116U's, both test ok with ohmmeter, however, one of these has some discoloration on the windings and the wiper assembly is broken, but it is still functional. Also, there is one 216U and it tests ok with an ohm...

110
LDG AT-1000ProII Auto Antenna Tuner
LDG AT-1000ProII Auto Antenna Tuner works well on all bands. Nice looking unit! DC power cable, radio cable and manual included as shown. Approx. Weight: 6 lbs. Approx. Dims: 12x10x3

111
LDG M-7600 Meter
LDG M-7600 Meter for IC-7600. In good working as well as looking condition. With cables, as shown. Approx. Weight: 2 lbs., boxed Approx. Dims: 9x6x6, boxed

112
Astron RS-35M Power Supply
Astron RS-35M Power Supply in good working and cosmetic condition. Tested OK at 30A. Approx. Weight: 24 lbs. Approx. Dims: 11x11x6

113
Astron RS-70M Power Supply
Astron RS-70M Power Supply. Nice looking and working power supply. Tests OK at 60A. There is no plug on the end of the power cord, so you'll need to supply your own. Approx. Weight: 48 lbs. Approx. Dims: 14x13x7

114
Astron RM-35M Power Supply
Astron RM-35M Power Supply, rack mount, in good working condition. Tested OK at 35A. There are some scuffs/scratches to the top of the unit, as shown. Approx. Weight: 38 lbs. Approx. Dims: 19x15x5

115
Sencore SC61 Waveform Analyzer
Sencore SC61 Waveform Analyzer. As shown, with accessories. Manual and full set of schematics included, but not pictured. All functions "work" but the set definitely needs calibration and some of the controls are very stiff when operated. Also, the ...

116
Sencore RC 167 The Substitutor
Sencore RC 167 The Substitutor in good working condition. Manaul included, but not shown. Approx. Weight: 6 lbs. Approx. Dims: 11x8x5

117
RCA WA-504B/44D Audio Generator
RCA WA-504B/44D Audio Generator in good working condition. Sine @ about 3V RMS and Square 8Vp-p. Approx. Weight: 5 lbs. Approx. Dims: 8x6x5

118
Sencore PR47 UHF Prescaler
Sencore PR47 UHF Prescaler works well to 800 MHz with sensitivity of about 2.0V. Manual included, but not shown. Approx. Weight: 2 lbs. Approx. Dims: 4x3x1

119
Helper Instruments Sinadder 3 S103 Meter
Helper Instruments Sinadder 3 S103 Meter in good working condition! Manual included, but not shown. Approx. Weight: 5 lbs. Approx. Dims: 9x7x3

120
Helper Instruments RF-801 Millivolter
Helper Instruments RF-801 Millivolter appears to be in working condition, however, there are no probes or manual with this unit. Approx. Weight: 4 lbs. Approx. Dims; 9x7x3

121
Sencore DVM56A Microranger Multimeter
Sencore DVM56A Microranger Multimeter. All functions work, however, the unit will need calibration. Manual and probes included, as shown. Approx. Weight: 8 lbs. Approx. Dims: 14x8x5

122
Comet CAA-500 Mk. II SWR Antenna Analyzer
Comet CAA-500 Mk. II SWR Antenna Analyzer in excellent working condition, as well as cosmetic condition. This unit appears to be hardly used, as the plastic film is still covering the display. Approx. Weight: 2 lbs. Approx. Dims: 8x4x3

123
Sencore FC71 Frequency Counter
Sencore FC71 Frequency Counter in good cosmetic as well as working condition. Input sensitivity is better than 5.0 uv on all ranges. Manual included, but not shown. Approx. Weight: 7lbs. Approx. Dims: 13x9x5

124
Sencore DVM56 Microranger
Sencore DVM56 Microranger in good cosmetic condition. This is a working unit, except the OHMS range is not steady. Manual included, but not shown. Approx. Weight: 8 lbs. Approx. Dims: 14x8x5

125
Sadelco FS-3D VU Signal Level Meter
Sadelco FS-3D VU Signal Level Meter in overall good cosmetic condition. VHF works well, UHF is non-operational. Approx. Weight: 5 lbs. Approx. Dims: 11x8x7

126
LDG RCA-14 Transceiver Accessory Port
LDG RCA-14 Transceiver Accessory Port in good working condition. Appears to still be NIB. Approx. Weight: 2 lbs. Approx. Dims: 10x7x3

127
National Radio Institute NRI Variac
National Radio Institute Variac. The meter is labeled NRI with a 0-15A scale, and the rheostat is STACO ENG PRODUCTS CO. This unit may be homebrew. It is in good working order at 117VAC. Note that the meter scale is percentage of maximum output vol...

128
JPS NIR-10 Noise/Interference Reduction Unit
JPS NIR-10 Noise/Interference Reduction Unitin good working order! Approx. Weight: 2 lbs. Approx. Dims: 7x7x2

129
Kenpro KR-500 Rotor Elevation Indicator
Kenpro KR-500 Rotor Elevation Indicator powers on and draws about 4.5W, but no further testing was performed. Approx. Weight: 5 lbs. Approx. Dims: 7x6x4

130
Drake CS7 Coax Switch
Drake CS7 Coax Switch in good looking condition. The LOCAL switch works fine, however, we do not have the remote section of the switch to test. Approx. Weight: 3 lbs. Approx. Dims: 8x7x5

131
B&W 334-A Dummy Load Wattmeter
B&W 334-A Dummy Load Wattmeter in good working condition. Approx. Weight: 11 lbs. Approx. Dims: 10x10x5

132
Bird Termaline 6150 Wattmeter
Bird Termaline 6150 Wattmeter. This is a 30~500 MHz unit, in good working condition, both on HI and LOW power. Approx. Weight: 9 lbs. Approx. Dims: 11x6x4

133
Tektronix 475M Oscilloscope
Tektronix 475M Oscilloscope, 200 MHz, in good working condition with 4 non-Tek probes. Very clean unit. Approx. Weight: 27 lbs. Approx. Dims: 20x12x6

134
"Almost All" Drake Digital Frequency Display
Drake Digital Frequency Display for Drake C-Line by Almost All Digital Electronics. This unit is in good working condition. You will need to supply your own DC power cord. Approx. Weight: 1 lb. Approx. Dims: 4x4x2

135
W2IHY EQplus Processor
W2IHY EQplus Processor. This unit appears to be in excellent cosmetic condition, however, no testing was performed due to the fact that no cable are present. Approx. Weight: 4 lbs. Approx. Dims: 9x6x4

136
Trans-Key Keyer
Trans-Key Keyer. This unit was untested due to not having the appropriate power connector. Approx. Weight: 2 lbs. Approx. Dims: 7x4x1

137
Heathkit R.F. Generator
Heathkit R.F. Generator in overall good cosmetic condition, as shown. All functions work on all bands. Approx. Weight: 4 lbs. Approx. Dims: 10x4x6

138
Heathkit BE-4 Battery Eliminator
Heathkit BE-4 Battery Eliminator in fair to good cosmetic condition. This unit basically works, however, the meter is a bit erratic, but voltages measure from just under 6V to over 16V with adjustment. Approx. Weight: 15 lbs. Approx. Dims: 13x8x7

139
Heathkit SG-7 R.F. Signal Generator
Heathkit SG-7 R.F. Signal Generator in overall good cosmetic condition. The generator works, but the output signal is distorted. Power consumption is 8W at 117VAC. Approx. Weight: 8 lbs. Approx. Dims: 10x7x6

140
Heathkit C-3 Condenser Checker
Heathkit C-3 Condenser Checker in overall good cosmetic condition. This unit will need some work, as the eye tube is very dim (only visible in dark room) and does not indicate capacitance or leakage. Power consumption is 14W at 117VAC. Approx. Weig...

141
Heathkit HP-23C Power Supply
Heathkit HP-23C Power Supply, as shown. Filter caps are bad, transformer is ok. Bottom cover is missing. Approx. Weight: 15 lbs. Approx. Dims: 10x6x5

142
Ten-Tec KR50 Morse Code Keyer
Ten-Tec KR50 Morse Code Keyer, as shown, in working condition. Approx. Weight: 2 lbs. Approx. Dims: 8x6x3

143
Heathkit GD-125 Q Multiplier
Heathkit GD-125 Q Multiplier, as shown. This unit does power up, but no further testing was performed. Power consumption is 4W at 117VAC. Approx. Weight: 2 lbs. Approx. Dims: 9x4x3

144
Kenwood PS-30 DC Power Supply
Kenwood PS-30 DC Power Supply. This unit is in fair cosmetic condition with some corrosion to the cabinet and rear panel, as shown. It is unregulated with 15V output, however, it drops to zero with a load. Some work will need to be done. Approx. Wei...

145
Lafayette 99-33094 Antenna Impedance Meter
Lafayette 99-33094 Antenna Impedance Meter in good working condition. Approx. Weight: 3 lbs. Approx. Dims: 10x5x3

146
ICOM IC-PS30 Power Supply
ICOM IC-PS30 Power Supply in good working condition. Tested with 20A load with no issues. Approx. Weight: 11 lbs. Approx. Dims: 12x10x5

147
ICOM IC-SP3 External Speaker
ICOM IC-SP3 External Speaker, as shown. In working condition, however, the input connector is intermittent. Approx. Weight: 5 lbs. Approx. Dims: 11x7x5

148
Heathkit SB-620 Scanalyzer
Heathkit SB-620 Scanalyzer in good working as well as cosmetic condition, as shown. Uses 455 KHz IF. Approx. Weight: 10 lbs. Approx. Dims: 11x10x8

149
Galaxy CW Monitor
Galaxy CW Monitor in good working condition. Some corrosion to the case, as shown. Approx. Weight: 1 lb. Approx. Dims: 5x3x7

150
Galaxy 300~ Filter F-3
Galaxy 300~ Filter F-3. There is some corrosion to the case, as shown. This unit appears to be non-operational. Approx. Weight: 2 lbs. Approx. Dims: 7x4x3

151
Staco 3PN1010 Variable Autotransformer
Staco 3PN1010 Variable Autotransformer in good working condition, as shown. Approx. Weight: 11 lbs. Approx. Dims: 7x6x5

152
B&K 282 Digital Multimeter
B&K 282 Digital Multimeter in good working condition, as shown. Approx. Weight: 4 lbs. Approx. Dims: 10x9x4

153
GE Electronic Tubes Advertising Display
GE Electronic Tubes Advertising Display. In very good cosmetic condition, as shown. Only the two tubes included, are pictured. Approx. Weight: 5 lbs. Approx. Dims: 18x9x2

154
Two Eimac 3-500Z Electron Tubes NIB
Two Eimac 3-500Z Electron Tubes NIB, NOS. As shown. Unopened. Codes on top of both boxes are stamped 7837. Approx. Weight: 1.5 lbs. each Approx. Dims: 11x7x7 each

155
4-1000A Transmitting Tube
4-1000A Transmitting Tube. In good condition, appears to have been used, filaments are good! Approx. Weight: 2 lbs. Approx. Dims: 9 x 5 inch dia.

156
Western Electric KS-15750-L1 Tube Tester
Hickok Western Electric KS-15750-L1 Tube Tester. This tester is in good overall cosmetic condition, and built like a tank! That being said, you can set the line/zero it, however, it does not indicate bias voltage nor does it indicate tube test result...

157
Eico 625 Tube Tester
Eico 625 Tube Tester in good overall cosmetic as well as working condition. Tested with known good tube. Approx. Weight: 9 lbs. Approx. Dims: 13x10x4

158
Precision 900 Tube Tester
Precision 900 Tube Tester. You can set the line adjust but this tester will not indicate any tube measurements. Approx. Weight: 13 lbs. Approx. Dims: 15x13x6

159
Precision 612 Tube & Battery Tester
Precision 612 Tube & Battery Tester. You can set the line adjust but this tester will not indicate any tube measurements. Approx. Weight: 14 lbs. Approx. Dims: 15x13x6

160
Triplet 3413-A Tube Tester
Triplet 3413-A Tube Tester. Nice looking tester, however, the meter needle is bent, thus, no testing was performed. The unit powers up and draws about 11W at 117VAC. Approx. Weight: 15 lbs. Approx. Dims: 15x12x7

161
Hickok 600A Tube Tester
Hickok 600A Tube Tester in good overall cosmetic condition. The unit does zero with no problems, and testing is fine, however, some calibration may be needed, as a few tubes tested somewhat low, compared to a calibrated TV-7. Power consumption is 24...

162
Jackson 636C Tube Tester
Jackson 636C Tube Tester in good overall cosmetic as well as working condition. Meter line adjust OK, as well as testing a few known good tubes. Power consumption is 3W at 117VAC. Approx. Weight: 12 lbs. Approx. Dims: 13x10x7

163
PA Amplifier, maker unknown
PA Amplifier, maker unknown. This cool looking unit uses a single ended 6V6 and is in working condition. With carry case and all of the accessories shown. The chrome and red marking may indicate that it is an RCA model. Approx. Weight: 29 lbs. Appro...

164
Heil Gold Elite Microphone
Heil Gold Elite Microphone in good working condition. Includes 8-pin DIN cable for use with ICOM rigs, i.e., IC-7410, IC-7600, etc. Approx. Weight: 2 lbs. Approx. Dims: 11x5x3

165
Palstar SP30B 5 Watt Communication Speaker
Palstar SP30B 5 Watt Communication Speaker in good working condition. Cosmetic condition is very good, as shown. Approx. Weight 2 lbs. Approx. Dims: 7x7x5

166
Electro Voice 630 Microphone
Electro Voice 630 Microphone in good working and looking condition. 4-pin DIN connector included with cable. Approx. Weight: 5 lbs.

167
Astatic D-104 Microphone & G Stand
Astatic D-104 Microphone & G Stand. In good working condition. No connector, just a connector housing attached. The chrome is very good to excellent, the base does show some scuffs/scratches. Approx. Weight: 3 lbs.

168
Astatic D-104 Microphone & G Stand
Astatic D-104 Microphone & G Stand in good working and looking condition. Chrome and base look great! No connector included. Approx. Weight: 3 lbs.

169
Astatic D-104 Microphone & G Stand
Astatic D-104 Microphone & G Stand. Another nice example of this classic mic. In good working as well as looking condition. Two pin mic connector included. A few minor scuffs are present on the back side of the mic head. Approx. Weight: 3 lbs.

170
Shure 444 Microphone
Shure 444 Microphone in good working condition with a 3/16' PL-68 phono (Collins) connector. The head/neck of the mic extend and contract with no issues. Cosmetically, in fair/good condition with some scrapes/scratches and the left rear corner plas...

171
Electro-Voice 619 Dynamic Microphone
Electro-Voice 619 Dynamic Microphone in very good overall working and looking condition! Includes 1/4' stereo phono connector. Approx. Weight: 3 lbs.

172
Turner 256 Hi-Z Crystal Microphone
Turner 256 Hi-Z Crystal Microphone. This mic is in good to very good cosmetic condition, however, there is no output. No connector is included. Approx. Weight: 3 lbs.

173
Electro-Voice 623 Microphone
Electro-Voice 623 Microphone in good to very good overall cosmetic condition, however, there is no output. Cord/connector not included. The base is a model 763D and is heavy cast metal. Approx. Weight: 5 lbs.

174
Heil HS-2 Ergonomic Hand Switch
Heil HS-2 Ergonomic Hand Switch in good working condition with original box. Approx. Weight: 1 lb. Approx. Dims: 7x4x2

175
Astatic 200 Crystal Bullet Microphone
Astatic 200 Crystal Bullet Microphone in good working condition. Some scuffs and scratches, but for a 1940's era mic, in good cosmetic condition. No connector is included. Approx. Weight: 2 lbs.

176
Turner Plus Three Microphone
Turner Plus Three Microphone in good working as well as cosmetic condition. With 4-pin DIN connector. You will need to supply a 9V transistor battery. Approx. Weight: 3 lbs.

177
Hy-Gain T2X Tailtwister Control, Rotor, Cable
Hy-Gain T2X Tailtwister Control, Rotor, Cable. The rotor and controller have been well used, and was removed from use from in working condition. We did not independently test this unit. The screw terminals on the bottom of the unit are corroded and o...

178
Yaesu NC-8 AC Power Supply & Charger
Yaesu NC-8 AC Power Supply & Charger. Powers up, but no further testing was done. Approx. Weight: 4 lbs. Approx. Dims: 7x7x4

179
ICOM IC-290H Transceiver
ICOM IC-290H Transceiver in fair, used cosmetic condition. This unit produces about 20W power output. Receive sensitivity is about 0.7 uv. Mic, power cord and manual included. Approx. Weight: 8 lbs. Approx. Dims: 9x7x3

180
ICOM IC-25A Transceiver
ICOM IC-25A Transceiver in fair, used condition cosmetically. This unit produces about 18-20W power output. However, there is no audio output. Mic and manual included. Approx. Weight: 5 lbs. Approx. Dims: 9x6x2

181
Ray Jefferson 789 Marine VHF/FM Transceiver
Ray Jefferson 789 Marine VHF/FM Transceiver. Powers up, but no further testing was done. Approx. Weight: 4 lbs.

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Ham Radio, Vintage Audio & Tube Radios!
 Online Only Auction
Auction Date(s)
Bidding Starts: Thursday Oct 15
Bidding Ends: Thursday Oct 29
Auction Location

Kansas City, MO 64116
Company
Schulman Auction & Realty, LLC

Website: www.schulmanauction.com

Listing Terms and Conditions
TERMS AND CONDITIONS ONLINE ONLY AUCTION! These are the Terms and Conditions of Sale for this online auction. They consist of this introduction and 27 (twenty-seven) numbered paragraphs and subparagraphs that outline the relationship between you ("the Bidder") and Schulman Auction & Realty, LLC, ("the Auctioneer"). Throughout these Terms and Conditions, the terms "auctioneer," "we," "us," and "our" will refer to the Auctioneer, and the terms "you" and "your" will refer to the Bidder. If you want to bid in this online auction, you will first have to read these Terms and Conditions. And by placing a bid, you agree that you have read the Terms and Conditions and understand the terms are binding on both you and on the Auctioneer, and all parties will be expected to abide by the Terms and Conditions if any issues arise in connection with this sale. Please read these Terms and Conditions carefully! They contain important information about the online auction itself and your rights and responsibilities as a bidder. 1. Registration: To gain access to this online auction, you will need to register and obtain a bidder number. You must be eighteen years old or older to register. You agree that all information that you provide during the registration process will be true and accurate. You will be banned from participation in the Auctioneer's auctions indefinitely should you provide any false information during the registration process. 2. Credit Card: In order to register for this auction, you will need a working Visa, MasterCard, Discover, or American Express card associated with your account. This card will be automatically charged at the end of the auction, if you are a winning bidder. NOTE: If this is your first time registering for one of our auctions with a credit card, your card may be temporarily charged a small fee of $1 or less for authentication purposes. This charge WILL be REMOVED after your card is successfully authenticated. None of your credit card information is stored with the auctioneer. 3. Bidder's Duty to Update Information: Whether you are a new or returning bidder, you agree that if any of the information associated with your bidder number - including contact information and credit card information - changes at any time prior to, during, or after this sale, you will notify the Auctioneer of the change by updating your bidder profile. 4. Conduct of Sale: All bids, and credits in this sale will be made in United States Dollars (USD). You agree not to use any hardware, software, program, or system that would interfere with the orderly conduct of this sale. You further agree not to copy, reproduce, or publically display any content from the Auctioneer's website without first obtaining written permission from the Auctioneer. 5. Bidder's Duty to Inspect and Investigate: You acknowledge that the Auctioneer is providing you with the opportunity to inspect the items being offered for sale in this auction. The Auctioneer strongly encourages you to attend the scheduled inspection for this auction. If you choose not to attend the scheduled inspection and are in doubt about the condition, completeness or suitability of a given item, please bid accordingly. a. Photographs and Descriptions: The Auctioneer regularly posts item descriptions and photographs to aid bidders in the bidding process, and we make every effort to ensure that the descriptions and photographs that we post accurately represent the items being offered for sale. In some photographs, multiple items may appear to be joined as a single unit, however you should not assume that a lot consists of more than one item simply because various items appear connected or are featured in the same photograph. Also understand that, on occasion, the wrong photograph may be displayed for a given item. At all times, you are bidding on items as they are described on this website, not as they appear in any photograph. b. Bid Wisely: We want everyone to be pleased with their purchases and most will. However, when you bid on the wrong item or decide an item is not suited for your intended use, our clients will not assume the cost of your mistakes. You agree that your failure to inspect or otherwise become fully informed about the items offered for sale in this auction will not be grounds for a refusal to pay amounts due to the Auctioneer nor for any claim against the Auctioneer. 6. WARRANTY AND CONDITION OF ITEMS SOLD: ALL LOTS AND ITEMS ARE SOLD AS IS, WHERE IS, WITH ALL FAULTS, AND WITH NO EXPRESS OR IMPLIED WARRANTIES. NO ACTION TAKEN BY THE AUCTIONEER OR ITS AGENTS IS INTENDED TO CREATE ANY EXPRESS OR IMPLIED WARRANY AS TO ANY LOT OR ITEM IN THIS SALE. THE AUCTIONEER SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE, CONFORMITY WITH ENVIRONMENTAL LAWS OR REQUIREMENTS, NON-INFRINGEMENT, ACCURACY, TITLE, OR ANY OTHER WARRANTY. IT IS BELIEVED THAT ALL DESCRIPTIONS ARE ACCURATE. DESCRIPTIONS ARE NOT GUARAUNTEED. 7. When You Have Been Outbid: If you are outbid during the course of this auction, you will be notified by email, if you have chosen this option when you registered. You can see if you are high bidder at any time using the "Watch List" feature; items which you have put on the Watch List will show the bidder name of the high bidder. 8. Reporting Bidding Errors: You should carefully review every bid you choose to make before submitting that bid. The Auctioneer will not automatically assume that any bid, even a bid that increases your own lower bid, was made in error. If you mistakenly increase your own bid at any time during the auction, or make some other bidding error (e.g. placing your bidder number in the price field), you must immediately contact the Auctioneer by email at david@dschulmanassociates.com. Reports of bidding errors must be made via e-mail; phone reports will not be accommodated. 9. Timeliness of Bidding Error Reports: If you make a bidding error during this auction, you must identify and report the error before the auction begins to close. The Auctioneer will not undo bidding errors reported after the auction has begun to close. 10. Bidder's Duty to Report Fraud: You are responsible for all bids made from your account. If you believe that an unauthorized person has gained access to your account, you must notify the Auctioneer immediately by sending an e-mail to david@dschulmanassociates.com. You must also report the incident to the relevant law enforcement authorities and send the Auctioneer a copy of any resulting police report. You understand and agree that if you do not promptly report any suspected fraud to the Auctioneer and to the relevant law enforcement authorities, you will be held personally responsible for all purchases made using your account and bidder number. 11. Changes in Circumstance: All aspects of this auction are subject to change without notice. The Auctioneer reserves the right to, at any time: (1) add or remove items from the auction, (2) split or combine lots, (3) add minimum bids or reserve prices, (4) cancel, suspend, extend or reschedule the sale of an individual item, lot, auction, and/or auction event, (5) make changes to the auction's closing, inspection, or removal times, or (6) take any other action the Auctioneer deems necessary to effect the fair conduct of this sale or protection of buyers', sellers', or other parties' interests. In the event a seller withdraws an item from this auction prior to the close of the auction, the Auctioneer may leave the item on the catalog and buy the item back on behalf of the seller to establish the Auctioneer's earned commission and the buyer's premium due to the Auctioneer from the seller. 12. Closing: the Auctioneer's online auctions are designed to mimic traditional "live" actions. For this reason, this auction will have a staggered, dynamic closing. a. Staggered Closing: This online auction will automatically begin to close at a rate of 3 items per minute. Items' closing times may be extended past their scheduled closing time, however, as a result of the Auctioneer's dynamic closing feature. b. Dynamic Closing: The closing time of an item is automatically extended an additional 3 minutes whenever a bid is placed within the 3 minutes leading up to an item's scheduled closing time. 13. Winning Bids: If you place a bid in this sale, and your bid is determined to be the winning bid, you become obligated to pay for the item(s) that you have won at the price you gave as your bid. a. Notification: If you end up placing one or more winning bids in this auction, the Auctioneer will contact you by e-mail to let you know which items you have won. This e-mail notification will be the only contact you receive from the Auctioneer about your winning bids; this means that you are responsible for checking your e-mail following the close of the auction to determine what items you have won. If you do not receive an e-mail identifying you as a winning bidder, it is because the Auctioneer has no record of your having placed a winning bid. b. Bid Inquiries: If you believe that you placed a winning bid, but do not receive an e-mail, you must notify the Auctioneer by sending an e-mail to david@dschulmanassociates.com explaining your situation by 9:00am on the day after of the auction has closed. You agree that the Auctioneer will be the sole authority regarding the identification of winning bids. 14. Payment: At the conclusion of this auction the credit card you used to register for this auction, will automatically be charged for your invoice amount. a. Chargebacks Prohibited: You agree that you will accept all charges placed on the credit card associated with your account, and you agree that you will not charge back any amount that is charged s to your credit card. You agree that this provision applies equally to amounts charged in connection with any items you have won and any costs or fees discussed in Paragraphs 16-18 of these Terms and Conditions. 15. Buyer's Premium: A 10% buyer's premium is added to every purchase. This means that if your winning bids add up to $100, you will be charged $110 at checkout, plus any applicable sales tax. 16. Default and Resale: You agree that if, after being declared the winning bidder, you fail to pay for any item that you have won for any reason, your account will be declared in default. If you still refuse to pay for any item after being notified of your account's being in default, you agree that the Auctioneer will have the right to immediately resell your item, and you further agree to pay (1) any cost associated with the resale and (2) any deficiency between your original purchase price and the resale price. 17. Picking Up/Shipping Your Items: IF you are picking up your items, you are solely responsible for the safe and timely pick-up and removal of any items you may win at this auction. IF you are having your items SHIPPED due to being located out of the area, see section "a" below. If you are unable to safely pick up and remove your items during the item pick up times that have been scheduled for this sale, PLEASE DO NOT BID. The Auctioneer does not hold items beyond the published removal times. The Auctioneer will not issue you a refund if you are unable to pick up and safely remove your items during the published removal times. a. SHIPPING: If shipping out of the area is required, we work with a local UPS franchise that will pickup your items the week following the auction. Shipping charges will be billed to you separately, by the shipper. Your name and phone number, along with a copy of your paid invoice and items won, will be given to the shipping company so that they may contact you to arrange shipping and payment. b. Bidder's Duty to Remove Items Safely: Again, you are solely responsible for the safe pick-up, removal, and transportation of your items. You agree that the pick-up, removal, and transportation of your items will be solely at your expense and at your risk. You further agree that you will be responsible for any damage that you or any of your agents cause during any inspection or removal period, and also agree that the credit card associated with your online account will be charged for any expenses incurred and/or repairs necessary as a result of any damage that you cause. c. Release Upon Presentation of Receipt: You understand and agree that the Auctioneer will release your items only after you or your agent presents a sales receipt generated by the Auctioneer stating that your account is paid in full. You further understand and agree that it is your duty to ensure that any agent picking up items on your behalf has a copy of your paid sales receipt to present at the pick-up location. You explicitly authorize the Auctioneer to release your items to any person in possession of your paid sales receipt. No item will be released to any person unless that person presents a paid sales receipt listing the item in question. d. Abandonment: You understand and agree that any item that you do not pick up during the published removal times will be considered abandoned. You understand and agree that you will be charged a reasonable fee for the storage, removal, and/or disposal of any item that is considered abandoned. 18. Disposal of Unclaimed Items: In the event you refuse to pay for or abandon any item that you win at auction, the Auctioneer will have the option of reselling, removing, storing, or disposing of the unpaid or abandoned item. You understand and agree that you will be personally responsible for all deficiencies including all legal, collection, transportation, and storage expenses associated with your delinquent account and/or abandoned items. In the event of resale, you agree to pay any cost associated with the resale as well as any deficiency between your original purchase price and the resale price. 19. Non-Delivery: In the unusual event that an item has been grossly misrepresented or is unavailable for pickup during the published removal times, you must immediately notify the Auctioneer's onsite staff of the problem and file a claim for non-delivery within twenty-four hours. You understand and agree that if you fail to make a claim for non-delivery within twenty-four hours of your discovering the problem, your claim for non-delivery will not be honored. Claims for non-delivery may be filed by replying to the e-mail that informed you of your winning binds. Your claim must fully describe the nature of the problem that you have identified. 20. Claims and Choice of Venue: Any claim or controversy out of or relating to these Terms and Conditions, or to any breach thereof, will be settled either (1) in Clay County, Missouri's Small Claims Court, if the claim in question amounts to less than $5,000, or (2) by means of arbitration in accordance with the Commercial Arbitration Rules of the American Arbitration Association, if the claim in question amounts to more than $5,000. In the event of arbitration, judgments upon the award rendered by the arbitrator may be entered by any court having jurisdiction. You agree that all claims will be litigated or arbitrated on an individual basis, and will not be consolidated with any claim made by another party. Venue in every case will be Clay County, Missouri. You agree that any judgments awarded may be applied to and collected from you personally or corporately. Should any party file an action contrary to this paragraph, the counterparty may recover reasonable legal fees and costs. Further, if you bring a claim against the Auctioneer and do not prevail, you agree that you will reimburse the Auctioneer for all reasonable legal fees and costs. 21. Interim or Preliminary Relief: Notwithstanding the contents of Paragraph 22 of these Terms and Conditions, you agree that the Auctioneer may seek interim or preliminary relief in a court having jurisdiction in order to protect any rights or property that the Auctioneer may have pending arbitration or litigation. 22. Liability: In all cases, the Auctioneer's liability, and the liability of the seller of the items in this auction, will be limited to the refund of your purchase price. The Auctioneer will not be liable for any amount in connection with the postponement or cancellation of this auction, or the withdrawal of any item or lot from this auction. In no event will the Auctioneer be liable for lost profits or any special, incidental, or consequential damages arising out of or in connection with this auction or any related sale or transaction. a. No Liability for the Acts of Third Parties: The Auctioneer is not responsible for any action taken by any seller, bidder, or other third party before, during, or after this auction. b. No Liability for Site Malfunction: You understand that this auction is online-only, and so relies on devices and programs that may malfunction without warning. You agree that the Auctioneer will not be liable for any error or inconvenience that may be the result of such a malfunction. You further understand and agree that the Auctioneer may void or suspend any sale, or resell any item, if the Auctioneer determines a transaction to have been affected by any site malfunction. 23. Indemnification: You agree to indemnify, defend, and hold harmless the Auctioneer and its employees, officers, owners, affiliates, agents, and representatives from and against any claims, losses, damages, liabilities, judgments, fees, costs, and expenses, including reasonable legal fees and costs, related to, arising from, or associated with you, your agents or representatives including, but not limited to, personal injury or property damage caused at any sales site or during removal or transportation of items won at auction, any dispute with another bidder, or any violation of these Terms and Conditions. 24. Limitations: These Terms and Conditions do not, nor are they intended to create any agency, partnership, joint venture, employer-employee, or franchisor-franchisee relationship. These Terms and Conditions cannot be altered except in writing by the Auctioneer. 25. Severability: If any term, provision, paragraph, condition, or other portion of this agreement, or the application of these, to any person, place, or circumstance, is held to be invalid, unenforceable, or void, the remainder of this agreement and such term, provision, covenant or condition as applied to other persons, places and circumstances will remain in full force and effect. 26. Governing Law: These Terms and Conditions will be governed by and construed under the laws of the State of Missouri. 27. Entire Agreement: These Terms and Conditions contain our entire agreement and supersede any prior oral or written agreements relating to the same subject matter.
This auction features some fantastic gear, including a Henry 8K Ultra and a 4K Ultra, as well as a Collins 30S-1, and Elecraft KPA-500 amplifier. A FlexRadio FLEX-6600 and Maestro Control Console, as well as an ICOM IC-7600, IC-7410, IC-R9000 and a Kenwood TS-450S. A Collins S-Line station and a Hallicrafters Cyclone SR-400A and PS-500A supply will also be featured. Of course there are many other pieces of Drake, Hallicrafters, Swan and Heathkit included, along with related items. Test equipment includes some tried and true gear from HP such as a 3585A and 8590A spectrum analyzer and a 5343A microwave frequency counter. There is also a Tektronix 7613 scope with the 7L18 spectrum analyzer module and many other pieces of test equipment. For our audio enthusiasts we'll be selling gear from the local estate of "Jaymanaa" in this auction as well as the next few upcoming sales. Jay was a frequent contributor to AudioKarma.org. Included will be a Conrad Johnson amplifier, Revox B215, B225 and B285 and many other items from H.H. Scott, Sherwood, Dynaco/Dynakit and Klipsch.

1
PAYMENT!
At the conclusion of this auction, the credit card you used to register with will automatically be charged for your purchases. A PAID invoice will be emailed to you. Please be sure that the card you used to register has sufficient funds/credit limit...

2
BIDDING INFORMATION!
Bidding is pretty simple, particularly if you've bid in an online auction before, but here's a quick rundown on some features that may be unfamiliar: Each lot in the auction is scheduled to close approximately 20 seconds apart. For example, Lot 1 is...

3
SHIPPING!
If you require shipping, please cut and paste the following link into your browser for specific details you need to know about our shipping process: https://www.schulmanauction.com/vintage-electronics/auction-shipping/

4
PREVIEW / PICKUP!
PLEASE NOTE OUR NEW ADDRESS BELOW Previews and pickups will be located at: One block north of our previous location. It's the commercial building behind the home. 404 NE 41st Street Kansas City, MO 64116 One block north of our previous location. ...

5
EQUIPMENT TESTING!
When possible, we do our best to test the equipment we sell so that you will know exactly what you are bidding on. That being said, we perform basic tests such as overall power consumption, receiver sensitivity, transmitter power output, etc. Depend...

6
Henry 8K Ultra Linear Amp/Late Version
Henry 8K Ultra Linear Amp/Late Version, Well, here's one you don't see every day. This is a rare beast, especially in the condition it's in, both cosmetically and working. You can tell that the previous owner took very good care of his gear. This amp...

7
Henry 4K Ultra Linear Amplifier, 220V
Henry 4K Ultra Linear Amplifier. Here's another gem of an amp, owned by the same individual that took such great care of the 8K, in the previous lot. With its' single 8877 in a grounded grid configuration, this amp produced over 2200W carrier output...

8
Collins 30S-1 Linear Amplifier, 220V
Collins 30S-1 Linear Amplifier. A very nice looking as well as working piece of Collins gear! With only 45W of drive, carrier output was approximately 925W. That's one hot tube! The amp is wired for 220V with a twist-lock plug, as shown. (SSB positi...

9
Elecraft KPA500 Amplifier
Elecraft KPA500 Amplifier. Very nice looking amplifier in great working condition. With 40W of drive, approximately 451W output was achieved on all bands. Includes manual, power cord and extra fuses. s/n: 2047 Approx. Weight: 26 lbs. Approx. Dims:...

10
FLEX 6600 Transceiver & Maestro Console
FLEX 6600 Transceiver & Maestro Console. This is one fantastic SDR! For those of you familiar with FLEX, you know what we're talking about. The 6600 itself is working well using one of the latest or the latest (at the time of writing this descripti...

11
ICOM IC-7600 Transceiver
ICOM IC-7600 Transceiver. Very nice looking and sounding rig. Very lightly used and in great shape! Receive sensitivity is approximately 0.3 uv on all bands and CW carrier output is about 95W+ on all bands. Includes mic, DC power cord, hand mic and...

12
ICOM IC-7410 Transceiver
ICOM IC-7410 Transceiver. Another very nice looking and working ICOM rig! Receive sensitivity is approximately 0.2 uv on all bands and CW carrier output is 95W+ on all bands. DC power cord and hand mic included. s/n: 02002313 Approx. Weight: 29 l...

13
ICOM PS-126 Power Supply
ICOM PS-126 Power Supply works and looks great. Tested OK with both the IC-7600 and IC-7410 in previous lots, at full power. Approx. Weigth: 6 lbs. Approx. Dims: 9x5x4

14
ICOM ID-51A Transceiver, Charger & Software
ICOM ID-51A Transceiver, Charger & Software. This dual bander appears to have been never used, as the plastic film is still present on the face of the display. RT Systems programming software WCS-D51 and BC-202 Rapid Charger included. Approx. Tota...

15
Kenwood TS-450S HF Transceiver
Kenwood TS-450S HF Transceiver. This rig is in great cosmetic as well as working condition. Includes yellow "Storm Case" similar to Pelican cases. Receive sensitivity is 0.1 uv on all bands, and CW carrier output is approximately 85W on all bands. ...

16
Collins 75S-3B Receiver, WE
Collins 75S-3B Receiver. This radio is in good to very good cosmetic condition with only a few minor scuffs/scratches. The trim ring is not yellowed. Receive sensitivity is approximately 0.5 uv on all bands and all functions are operational. The 2....

17
Collins 32S-3 Transmitter, WE
Collins 32S-3 Transmitter in good working condition with approximately 65 ~ 90W CW carrier output. s/n 13685 Approx. Weight: 16 lbs. Approx. Dims: 14x13x8

18
Collins 516F-2 Power Supply
Collins 516F-2 Power Supply in good working condition. As you can see, it was recapped at some point in the past, and solid state rectifiers are being used. s/n 13039 Approx.Weight: 31 lbs. Approx. Dims: 9x7x6

19
Collins 312B-4 Station Control, WE
Collins 312B-4 Station Control in good working and cosmetic condition. Trim ring is not yellowed. There are some minor scuffs and scratches to the cabinet. s/n 55846 Approx. Weight: 6 lbs. Approx. Dims: 12x10x8

20
Hallicrafters Cyclone III SR-400A & PS-500A
Hallicrafters Cyclone III SR-400A Transceiver & PS-500A Power Supply. Here's one you don't see very often, especially in this shape! Cosmetically, there are some scuffs/scratches and a bit of paint loss to the cabinet, but overall very nice condition...

21
Yaesu FT-101EE SSB Transceiver
Yaesu FT-101EE SSB Transceiver. This rig is in overall good to very good cosmetic condition. Receive sensitivity ranges from 0.2 - 3.0 uv on all modes. Power output is approximately 100W on 80-40M, 80W on 20M and 40W on 15-10M. There is no RX/TX on ...

22
ICOM IC-732 Transceiver
ICOM IC-732 Transceiver in need of a bit of work. Receive sensitivity is about 30.0 uv, and there is no TX output. The PLL does not lock on 160M-40M, and is likely caused by a problem with VCO#1 of the main loop. The set does lock on 10M-30M, however...

23
Yaesu FT-107M Transceiver
Yaesu FT-107M Transceiver. Nice looking rig that you just don't see every day. Receive sensitivity is 0.1 uv on all bands. CW carrier output is approximately 100W on 160M-12M, and 60W on 10M. All other features appear to be OK. There is NO narrow C...

24
ICOM IC-R9000 Receiver, w / NEW Display
PLEASE NOTE, this item will be shipped from Las Vegas, NV for a flat rate of $125 to anywhere in the Continental US. It will be added to your final invoice. If you live elsewhere or would like to pick this radio up in Las Vegas, please contact the au...

25
Hallicrafters SX-100 MARK 2 Receiver
Hallicrafters SX-100 MARK 2 Receiver in overall good cosmetic condition. Receive sensitivity is about 3.0 uv and power consumption is 70W at 117VAC. Approx. Weight: 40 lbs. Approx. Dims: 19x10x9

26
Hammarlund HQ-170A Receiver
Hammarlund HQ-170A Receiver in very good to excellent cosmetic as well as working condition. All functions work well, and receive sensitivity is about 0,3 uv on 160~10M, and 0.7 uv on 6M. Power consumption is 93W at 117VAC. The clock is in working c...

27
Drake R-4B Receiver
Drake R-4B Receiver. Cosmetically, this unit does have some scuffs/scratches to the cabinet, as shown, and there is a slight downward bend to the rear of the case. The front panel is in very good to excellent condition, however. All functions are wo...

28
Drake R-4C Receiver
Drake R-4C Receiver in good looking as well as operating condition. Receive sensitivity is about 0.7 uv or better on all bands. There is no CW .25 filter or calibrator, present. However, the CW 1.5, and .5 filters are installed, as shown on the back ...

29
Drake R-4C Receiver
Drake R-4C Receiver in good cosmetic condition with approximately 1.0 uv or better receive sensitivity on all bands. All functions do appear to work, however, the controls are noisy/dirty and will need some cleaning and TLC. Also, please note the f...

30
Drake T-4XC Transmitter
Drake T-4XC Transmitter in good working and looking condition. Works well on all bands with about 100W+ CW carrier output. This unit was used to the test the L-4B amplifier, also found in this auction. Approx. Weight: 14 lbs. Approx. Dims 13x11x6

31
Drake T-4XC Transmitter, parts or repair
Drake T-4XC Transmitter for parts or repair, non-operational. Excessive current draw and smoke! Approx. Weight: 14 lbs. Approx. Dims 13x11x6

32
Drake MS-4 Speaker/AC-4 PS
Drake MS-4 Speaker and AC-4 Power Supply. Works well with T-4XC at 100W output. Approx. Weight: 24 lbs. Approx. Dims: 12x11x6

33
Drake MN-2000 Matching Network Antenna Tuner
Drake MN-2000 Matching Network Antenna Tuner. Works well on all bands. As you can see in the photos, the band switch knob has been replaced. Approx. Weight: 15 lbs. Approx. Dims: 16x11x6

34
Drake W-4 Wattmeter
Drake W-4 Wattmeter. Nice looking meter, with a good meter movement, however, the meter will not read forward or reverse power. An ohmmeter was used to test the meter movement. Approx. Weight: 1 lb. Approx. Dims: 6x5x4

35
Drake L-4B Linear Amplifier & Power Supply
Drake L-4B Linear Amplifier and Power Supply. Some scuffs/scratches, but overall in good cosmetic shape. Wired for 220V, this Class B grounded grid amp, with its two 3-500Z's, produced about 472W CW carrier output with only 54W of drive. Approx. We...

36
Drake UV-3 Transceiver & PS-3 Supply
Drake UV-3 FM Transceiver & PS-3 Supply. Here's one you don't come across every day. The UV-3 transceiver is in working condition with the accompanying PS-3 supply. Receive sensitivity is approximately 0.5 uv on 2M, and 0.3 uv on 1.25M and 70cm. Pow...

37
Swan 1500Z Linear Amplifier
Swan 1500Z Linear Amplifier in very good cosmetic condition. With its pair of 572B's, this amp produced about 323W CW carrier output with 55W of drive. Approx. Weight: 40 lbs. Approx. Dims: 15x15x8

38
Hallicrafters S-118 Receiver
Hallicrafters S-118 Receiver in overall fair to good cosmetic condition. The cabinet looks great, but the brushed metal/chrome on the faceplate is scratched and scuffed, as shown. That being said, all functions work, and receive sensitivity is abou...

39
Hallicrafters S-214 Receiver
Hallicrafters S-214 Receiver. You don't see these every day. This solid state radio is in good condition with some scratches and scuffs. The telescoping antenna extends and retracts, but the screw on tip is missing. Receive sensitivity is about 3.0 ...

40
Hallicrafters SR-150 Transceiver
Hallicrafters SR-150 Transceiver in overall good cosmetic condition, as shown. The 28 MHz band is nonoperational in receive, all other bands are about 0.5 uv sensitivity. CW carrier output is about 14W on 3.5 MHz, 80W on 14 MHz, 60W on 21 MHz, and...

41
Hallicrafters SX-25 Super Defiant Receiver
Hallicrafters SX-25 Super Defiant Receiver in overall good cosmetic condition, both inside and out. This set will need a tune-up/alignment. Receive sensitivity is approximately 15.0 - 50.0 uv across the bands. Approx. Weight: 40 lbs. Approx. Dims:...

42
Hallicrafters SX-71 Receiver
Hallicrafters SX-71 Receiver in overall good cosmetic condition. The volume and sensitivity knobs are non-original, as shown. The switches/contacts on this set are dirty and will need some cleaning and lubricating. Receive sensitivity is about 15.0 ...

43
Hallicrafters HT-32 Mark 1 Transmitter
Hallicrafters HT-32 Mark 1 Transmitter in overall good cosmetic condition, both inside and out. CW carrier output was as follows: 40W on 80M, 7W on 40M and 11W on 20-10M. Power consumption was 176W idle, and about 277W during transmit, at 117VAC....

44
Hallicrafters R-48A Speaker
Hallicrafters R-48A Speaker in overall good cosmetic as well as working condition. Approx. Weight: 5 lbs. Approx. Dims: 14x9x7

45
Hallicrafters S-38C Receiver
Hallicrafters S-38C Receiver in overall good cosmetic condition. Receive sensitivity is about 2.0 uv. Power consumption is 28W at 117VAC. Approx. Weight: 10 lbs. Approx. Dims: 14x9x7

46
Hallicrafters/Northrop HT-2A HF/VHF Radio
Hallicrafters/Northrop HT-2A HF/VHF Radio, handheld. There is static heard from the speaker, however, not TX/RX. The factory repair label indicates 37.525 MHz. This is a 12VDC unit. According to the internet, these radios were used by civilians dur...

47
Hallicrafters PS-150-12 Power Supply
Hallicrafters PS-150-12 Power Supply for the SR-150 to be run from a 12VDC source. All voltages test OK. 2A idle current. Approx. Weight: 7 lbs. Approx. Dims: 11x7x4

48
Johnson Viking Adventurer Transmitter
Johnson Viking Adventurer Transmitter in overall good cosmetic condition. However, this rig does not produce any TX out. Power consumption is 100W at 117VAC. Approx. Weight: 11 lbs. Approx. Dims: 11x9x8

49
RME 4004 Converter
RME 4004 Converter, as shown. The line cord is bad and will need to be replaced. No further testing done. Approx. Weight; 6 lbs. Approx. Dims: 8x7x6

50
RME 4004 Converter
RME 4004 Converter. The filter caps will need to be replaced in this unit. Power consumption was 20W at 117VAC. Approx. Weight: 6 lbs. Approx. Dims: 8x7x6

51
Heathkit HW-30 Twoer Transceiver
Heathkit HW-30 Twoer Transceiver in overall fair to good condition. As you can see, the Heahtkit logo is missing on the front plate. This unit has bad filter caps, and thus, non-operational. Power consumption was 90W at 117VAC. The crystal in this se...

52
Hallicrafters HT-1 HF/VHF Radio
Hallicrafters HT-1 HF/VHF Radio, handheld. Static is heard, but no TX/RX. Frequency unknown. According to the internet, these radios were used by civilians during the Vietnam war to contact US troops. It was known as a "village radio" that operates 3...

53
Hammarlund CB-212 Transceiver
Hammarlund CB-212 Transceiver. In fair to good cosmetic condition with mic. The DC vibrator is frozen. No RX/TX. Channels are 1, 6, 9, 11, 16 and 18. Approx. Weight: 11 lbs. Approx. Dims: 12x7x6

54
Heathkit HW-20 Daystrom Transceiver
Heathkit HW-20 Daystrom Transceiver in overall good to very good cosmetic condition. There is no TX/RX, but it is getting B+ since the regulator tube is glowing. Power consumption is 40W at 117VAC. Approx. Weight: 27 lbs. Approx. Dims: 15x11x7

55
Heathkit HW-32A SSB 20M Transceiver
Heathkit HW-32A SSB 20M Transceiver in good working as well as cosmetic condition, as shown. Approximately 80W carrier output and 0.5 uv receive sensitivity. There is no crystal calibrator installed. Approx. Weight: 12 lbs. Approx. Dims: 13x11x7

56
Heathkit HW-32A SSB 20M Transceiver
Heathkit HW-32A SSB 20M Transceiver in good working as well as cosmetic condition, as shown. Approximately 60W carrier output and 0.5 uv receive sensitivity. The crystal calibrator is installed. Approx. Weight: 12 lbs. Approx. Dims: 13x11x7

57
Gonset Communicator
Gonset Communicator for parts only. As shown. Approx. Weight: 17 lbs. Approx. Dims: 11x10x9

58
Tempo Speaker
Tempo Speaker, model number unknown. This is a working unit. Please note that the speaker cord will need to be replaced. Also, cosmetically, the unit does have some scratches to the cabinet. Approx. Weight: 4 lbs. Approx. Dims: 8x7x7

59
Mobile Speaker, unmarked
Mobile speaker in working condition, but unmarked. As you can see, the label on the bottom right corner has fallen off. It is a black metal case. Approx. Weight: 3 lbs. Approx. Dims: 7x3x5

60
ReVox B215 Cassette Tape Deck
ReVox B215 Cassette Tape Deck in working condition, and very nice cosmetic shape. There are 4 brief videos showing functionality. In order they are FF, RW, REC and REC/PLAYBACK. Power cord is included. No remote for this unit. Approx. Weight: 20 l...

61
ReVox B285 Receiver
ReVox B285 Receiver. The tuner works, however, the amp is very quiet and distorted. Cosmetic condition is very good, as shown. Power cord includec. No remote for this unit. Approx. Weight: 32 lbs. Approx. Dims:; 18x14x6

62
ReVox B225 CD Player
ReVox B225 CD Player. Very nice looking unit with some scratches and scuffs to the cabinet, and a scratch to the front plexiglass. That being said, this unit does work, both channels. However, when we first turned it on, it did not track. After work...

63
Conrad-Johnson MV50 Amplifier
Conrad-Johnson MV50 Amplifier. One of the classics, here folks! A beautiful MV50 with only minor scuffs to the cabinet. The front panel looks great and 2 cover screws are missing. That being said, only the right channel is functional on this amp. Al...

64
H.H. Scott 222-B Stereo Amplifier
H.H. Scott 222-B Stereo Amplifier. This amplifier is in good overall cosmetic condition, with a few minor scuffs/scratches, as shown. Testing was performed using a signal generator, and both channels did work, and all other functions appeared to wor...

65
H.H. Scott 299 Amplifier
H.H. Scott 299 Amplifier in good overall cosmetic condition with some scuffs/scratches, as shown. This unit is missing it's tube compliment and a cover. Power transformer tests ok, and power consumption was 5W at 117VAC. Approx. Weight: 20 lbs. App...

66
Sherwood S-9000a Amplifier
Sherwood S-9000a Amplifier in overall good cosmetic condition with some scuffs/scratches, as shown. There does appear to be a power supply issue, perhaps filter caps needing replaced. With no signal, power consumption keeps climbing upon power up. ...

67
Sherwood S8000 FM-MX Receiver
Sherwood S8000 FM-MX Receiver in overall good cosmetic condition, as shown. No testing performed due to power cord being cut and missing fuse and holder. Note that there are no tubes in this unit. Approx. Weight: 33 lbs. Approx. Dims: 16x15x5

68
The Fisher 600 / TA-600 Amplifier
The Fisher 600 Amplifier with TA-600 chassis. This amp is in overall good condition with some scratches and scuffs, and the cover is missing, as shown. Channel A is non-operational, however, Channel B is working. Receive on AM/FM is ok. Power consu...

69
Technics ST-8600 Stereo Tuner
Technics ST-8600 Stereo Tuner in good overall cosmetic as well as working condition. Power consumption is 18W at 117VAC. Approx. Weight: 23 lbs. Approx. Dims: 19x13x7

70
Trio W-40 AM-FM Stereo Receiver
Trio W-40 (Kenwood) AM-FM Stereo Receiver in good overall cosmetic condition, with some minor scuffs and scratches to the cabinet. The front panel looks very good. Testing was performed using a signal generator, and both channels did work, and all o...

71
Sansui AU-919 Integrated Amplifier
Sansui AU-919 Integrated Amplifier in overall good cosmetic condition, with a few scuffs and scratches to the cabinet, however, the front panel looks very good. Testing was performed using a signal generator, and both channels did work, and all othe...

72
Bogen SRB 20 Stereo Amplifier
Bogen SRB 20 Stereo Amplifier. This unit does not include tubes or a cover. We did test for shorts and none found. No other testing was performed. Approx. Weight: 20 lbs. Approx. Dims: 17x14x5

73
Sherwood S-5500 III 80 Watt Amplifier
Sherwood S-5500 III 80 Watt Amplifier. In good overall condition with only a few scuffs/scratches to the cabinet. The cabinet is not attached to the chassis. We did test for shorts and none were found. Approx. Weight: 30 lbs. Approx. Dims: 14x14x5

74
Dynakit FM Tuner
Dynakit FM Tuner, no model number found. The power cord is cut, the left most knob is missing and there are no tubes or a bottom cover. The bottom left of the front panel is slightly bent. Approx. Weight: 8 lbs. Approx. Dims: 13x9x4

75
Dynakit PAS-2 Preamp
Dynakit PAS-2 Preamp. This unit does have some scratches/scuffs to the cabinet and front panel, and a small dent to the top of the cover. But overall fair/good cosmetic condition. Testing was performed using a signal generator, and both channels did...

76
Dynaco FM-5 Tuner
Dynaco FM-5 Tuner in good overall cosmetic condition, as well as working condition. Power consumption is 5W at 117VAC. Approx. Weight: 9 lbs. Approx. Dims: 14x9x5

77
Dynaco FM Tuner
Dynaco FM Tuner in overall good cosmetic condition with the bottom cover missing. This unit had the power cord cut and was not tested. Approx. Weight: 8 lbs. Approx. Dims: 13x9x5

78
Dynakit PAS-2 Preamp
Dynakit PAS-2 Preamplifier. Clean, both inside and out, with a few scuffs/scratches to the cabinet. No tube compliment. Appears to be original. Power consumption was 2.5W at 117VAC. Approx. Weight: 7 lbs. Approx. Dims: 13x9x5

79
Eico HF-85 Stereo Preamp
Eico HF-85 Stereo Preamp in overall good cosmetic condition with a few scuffs/scratches to the cabinet. Testing was performed using a signal generator, and both channels did work, and all other functions appeared to work as intended. As this is vint...

80
Radio Shack Dual 15 Band Equalizer
Radio Shack Dual 15 Band Equalizer in working condition. Approx. Weight: 7 bs. Approx. Dims: 20x12x1

81
Custom Built Audio Amp by "jaymanaa"
Custom Built Audio Amp by "jaymanaa". Jaymanaa was a frequent contributor to the AudioKarma website, where he assisted many in their trials and tribulations with various audio equipment. He also built a lot of custom audio amplifiers, of which this i...

82
Custom Built Audio Amp by "jaymanaa"
Custom Built Audio Amp by "jaymanaa". Jaymanaa was a frequent contributor to the AudioKarma website, where he assisted many in their trials and tribulations with various audio equipment. He also built a lot of custom audio amplifiers, of which this i...

83
Custom Built Audio Amp by "jaymanaa"
Custom Built Audio Amp by "jaymanaa". Jaymanaa was a frequent contributor to the AudioKarma website, where he assisted many in their trials and tribulations with various audio equipment. He also built a lot of custom audio amplifiers, of which this i...

84
(4) Various 2A3 Tubes
(4) Various 2A3 Tubes. Included are the following tubes and their test data. Testing was performed using a Dan Nelson calibrated TV-7/DU tester: Sylvania, 74/38 Raytheon, 60/38 KEN-RAD, 73/38 Tung-Sol, 72/38 Where 38 is the minimum good value, or 6...

85
(4) Tung-Sol 5881 Tubes
(4) Tung-Sol 5881 Tubes. Included are the following tubes and their test data. Testing was performed using a Dan Nelson calibrated TV-7/DU tester: Tung-Sol, 42/25 Tung-Sol, 40/25 Tung-Sol, 37/25 Tung-Sol, 36/25 Where 25 is the minimum good value, o...

86
(2) Sovtek 2A3 Gold Tubes
(2) Sovtek 2A3 Gold Tubes. Testing was performed using a Dan Nelson calibrated TV-7/DU tester, as follows: 71/38 and 72/38 Where 38 is the minimum good value, or 60%. No shorts or gas. They were also current matched by the manufacturer, as shown on...

87
Klipsch Heresy II Speakers
Klipsch Heresy II Speakers. These tried and true speaker are in working condition. They do appear to be vintage, so I'm guessing that rebuilt crossovers and a re-cone job may not be far off. Cosmetically, the cases do show some wear and exhibit som...

88
Pair of Vintage JBL Speakers
Pair of Vintage JBL Speakers, as shown. You can see that the horn/tweeter was removed and the 15" woofer remains. These are some hefty speakers and I would not recommend shipping them. They are in working condition. No model number was found on the u...

89
13 Tomiko & Keen Ocean Torodial Transformers
13 Tomiko & Keen Ocean Torodial Transformers. These are new. Included are: (10) Tomiko OPT-PP-KT66 (2) Tomiko OPT-300B (1) Keen Ocean TTO-11019-04 Approx. Weight, total: 52lbs.

90
MG HM-100& HT-500 Horns
MG HM-100& HT-500 Horns. As shown, all test OK. They are used. Approx. Weight: 7 lbs. total. Approx. Dims: 10.5 inches wide and 5 inches wide

91
Emerson CS320 Radio
Emerson CS320 Radio. This table top set is in fair condition cosmetically, with some scratches and scuffs and wear throughout, as shown. The band switch knob is missing. This is an Ingraham cabinet. Electrically, only static when tuning around the ...

92
Truetone 2718 Table Radio
Truetone 2718 Table Radio. Nice looking set, that does appear to have been repainted at some point in it's life. Electrically, the set draws about 26W at 115VAC. That being said the volume control is frozen and the tuning pointer is missing, or it ma...

93
Kolster 6-D Radio Receiver
Kolster 6-D Radio Receiver. Nice looking early (mid to late 1920's) TRF set will all x01A tubes included. Untested. Clean radio, both inside and out with only minor scuffs and scratches. Approx. Weight: 30 lbs. Approx. Dims: 19x12x11

94
RCA Victor 3-BX-671 Radio
RCA Victor 3-BX-671 Radio. Overall fair to good condition cosmetically. Power consumption was about 11W at 117VAC. The set did receive BCB stations very well, with a definite 60Hz hum present. No other bands were tested, however, the controls are dir...

95
Green Zenith R-512-F Table Radio
Green Zenith R-512-F Table Radio, in overall good cosmetic condition with no chips or cracks. The bottom cover is missing, as shown. This radio is in working condition, receives well and draws about 30W at 115VAC. Approx. Weight: 5 lbs. Approx. Dim...

96
Philco 48-214 Transitone Table Radio
Philco 48-214 Transitone Table Radio in good overall cosmetic as well as working condition. Power consumption was about 24W at 117VAC. Approx. Weight: 6 lbs. Approx. Dims: 14x8x7

97
Candle VMS-1218 Portable Radio
Candle VMS-1218 Portable radio, new in box, as shown. We left the packaging intact, and did not perform any testing. Approx. Weight: 3 lbs. Approx. Dims: 11x9x5

98
RCA B-411 Portable Radio
RCA B-411 Portable Radio. Nice looking radio in leather case. This unit is non-operational. Approx. Weight: 3 lbs. Approx. Dims: 8x7x3

99
Lafayette 99-3550L 4 Band Radio
Lafayette 99-3550L 4 Band Radio, as shown. In good working condition on all bands. Approx. Weight: 6 lbs. Approx. Dims: 13x11x6

100
RCA Cathedral Radio
RCA Cathedral Radio. Model number unknown. Looks like a 6 tube set. The audio amp works, however, there is no receive and/or static heard. The cabinet is quite rough, as shown. Some of the knobs are non-original. Power consumption is 68W at 117VAC....

101
Hewlett-Packard 5343A Frequency Counter
Hewlett-Packard 5343A Microwave Frequency Counter, in good working condition. Please note we were only able to test to 2.0 GHz. This counter has two ranges, 10 Hz to 500 MHz and 500 MHz to 26.5 GHz. Approx. Weight: 21 lbs. Approx. Dims: 20x9x5

102
Hewlett-Packard 8590A Spectrum Analyzer
Hewlett-Packard 8590A Spectrum Analyzer. This set is in good working condition. The photo shows a 750 MHz signal from our generator. The range is 10 KHz to 1.5 GHz. Approx. Weight: 31 lbs. Approx. Dims: 18x13x8

103
Tektronix 7613 Scope w/7L18 Module
Tektronix 7613 Oscilloscope with rare 7L18 Spectrum Analyzer Module, which ranges from 1.5 to 60 GHz. Please note we were only able to test this unit to 2.0 GHz. Shown, is the display with a 1.9 GHz signal. There are issues with the display freezing...

104
Hewlett-Packard 3585A Spectrum Analyzer
Hewlett-Packard 3585A Spectrum Analyzer, 20 Hz to 40 MHz. This is one beast of an analyzer. It does successfully display a signal, however, as you can see in the photos, the signal displayed is quite noisy (photo 2) compared to the same signal on o...

105
Hickok 5058A Variable Power Supply
Hickok 5058A Variable Power Supply in good overall cosmetic condition. AC output is in good working order, however, their is no DC output. Approx. Weight: 20 lbs. Approx. Dims: 9x9x7

106
Sico 76 C.R. Bridge & Signal Tracer
Sico 76 C.R. Bridge & Signal Tracer. This Superior Instruments Co., bridge and tracer is in good to very good cosmetic condition. However, the unit is non-operational, except for the fact that it draws about 10W when powered on at 117VAC. Includes p...

107
Heathkit Variable Voltage DC Power Supply
Heathkit Variable Voltage DC Power Supply. This regulated supply is in good working condition and appears to be accurate up to about 300VDC. Approx. Weight: 16 lbs. Approx. Dims: 13x8x8

108
Heathkit LG-1 Laboratory Generator
Heathkit LG-1 Laboratory Generator in good overall cosmetic condition. The front panel is very clean. This is a working unit, however, the output is distorted. We tested with a 50 ohm and 1 megohm load. Approx. Weight: 11 lbs. Approx. Dims: 13x10x8

109
Three Powerstats/Variacs - 116U, 216U
Three Powerstats/Variacs. There are 2, 116U's, both test ok with ohmmeter, however, one of these has some discoloration on the windings and the wiper assembly is broken, but it is still functional. Also, there is one 216U and it tests ok with an ohm...

110
LDG AT-1000ProII Auto Antenna Tuner
LDG AT-1000ProII Auto Antenna Tuner works well on all bands. Nice looking unit! DC power cable, radio cable and manual included as shown. Approx. Weight: 6 lbs. Approx. Dims: 12x10x3

111
LDG M-7600 Meter
LDG M-7600 Meter for IC-7600. In good working as well as looking condition. With cables, as shown. Approx. Weight: 2 lbs., boxed Approx. Dims: 9x6x6, boxed

112
Astron RS-35M Power Supply
Astron RS-35M Power Supply in good working and cosmetic condition. Tested OK at 30A. Approx. Weight: 24 lbs. Approx. Dims: 11x11x6

113
Astron RS-70M Power Supply
Astron RS-70M Power Supply. Nice looking and working power supply. Tests OK at 60A. There is no plug on the end of the power cord, so you'll need to supply your own. Approx. Weight: 48 lbs. Approx. Dims: 14x13x7

114
Astron RM-35M Power Supply
Astron RM-35M Power Supply, rack mount, in good working condition. Tested OK at 35A. There are some scuffs/scratches to the top of the unit, as shown. Approx. Weight: 38 lbs. Approx. Dims: 19x15x5

115
Sencore SC61 Waveform Analyzer
Sencore SC61 Waveform Analyzer. As shown, with accessories. Manual and full set of schematics included, but not pictured. All functions "work" but the set definitely needs calibration and some of the controls are very stiff when operated. Also, the ...

116
Sencore RC 167 The Substitutor
Sencore RC 167 The Substitutor in good working condition. Manaul included, but not shown. Approx. Weight: 6 lbs. Approx. Dims: 11x8x5

117
RCA WA-504B/44D Audio Generator
RCA WA-504B/44D Audio Generator in good working condition. Sine @ about 3V RMS and Square 8Vp-p. Approx. Weight: 5 lbs. Approx. Dims: 8x6x5

118
Sencore PR47 UHF Prescaler
Sencore PR47 UHF Prescaler works well to 800 MHz with sensitivity of about 2.0V. Manual included, but not shown. Approx. Weight: 2 lbs. Approx. Dims: 4x3x1

119
Helper Instruments Sinadder 3 S103 Meter
Helper Instruments Sinadder 3 S103 Meter in good working condition! Manual included, but not shown. Approx. Weight: 5 lbs. Approx. Dims: 9x7x3

120
Helper Instruments RF-801 Millivolter
Helper Instruments RF-801 Millivolter appears to be in working condition, however, there are no probes or manual with this unit. Approx. Weight: 4 lbs. Approx. Dims; 9x7x3

121
Sencore DVM56A Microranger Multimeter
Sencore DVM56A Microranger Multimeter. All functions work, however, the unit will need calibration. Manual and probes included, as shown. Approx. Weight: 8 lbs. Approx. Dims: 14x8x5

122
Comet CAA-500 Mk. II SWR Antenna Analyzer
Comet CAA-500 Mk. II SWR Antenna Analyzer in excellent working condition, as well as cosmetic condition. This unit appears to be hardly used, as the plastic film is still covering the display. Approx. Weight: 2 lbs. Approx. Dims: 8x4x3

123
Sencore FC71 Frequency Counter
Sencore FC71 Frequency Counter in good cosmetic as well as working condition. Input sensitivity is better than 5.0 uv on all ranges. Manual included, but not shown. Approx. Weight: 7lbs. Approx. Dims: 13x9x5

124
Sencore DVM56 Microranger
Sencore DVM56 Microranger in good cosmetic condition. This is a working unit, except the OHMS range is not steady. Manual included, but not shown. Approx. Weight: 8 lbs. Approx. Dims: 14x8x5

125
Sadelco FS-3D VU Signal Level Meter
Sadelco FS-3D VU Signal Level Meter in overall good cosmetic condition. VHF works well, UHF is non-operational. Approx. Weight: 5 lbs. Approx. Dims: 11x8x7

126
LDG RCA-14 Transceiver Accessory Port
LDG RCA-14 Transceiver Accessory Port in good working condition. Appears to still be NIB. Approx. Weight: 2 lbs. Approx. Dims: 10x7x3

127
National Radio Institute NRI Variac
National Radio Institute Variac. The meter is labeled NRI with a 0-15A scale, and the rheostat is STACO ENG PRODUCTS CO. This unit may be homebrew. It is in good working order at 117VAC. Note that the meter scale is percentage of maximum output vol...

128
JPS NIR-10 Noise/Interference Reduction Unit
JPS NIR-10 Noise/Interference Reduction Unitin good working order! Approx. Weight: 2 lbs. Approx. Dims: 7x7x2

129
Kenpro KR-500 Rotor Elevation Indicator
Kenpro KR-500 Rotor Elevation Indicator powers on and draws about 4.5W, but no further testing was performed. Approx. Weight: 5 lbs. Approx. Dims: 7x6x4

130
Drake CS7 Coax Switch
Drake CS7 Coax Switch in good looking condition. The LOCAL switch works fine, however, we do not have the remote section of the switch to test. Approx. Weight: 3 lbs. Approx. Dims: 8x7x5

131
B&W 334-A Dummy Load Wattmeter
B&W 334-A Dummy Load Wattmeter in good working condition. Approx. Weight: 11 lbs. Approx. Dims: 10x10x5

132
Bird Termaline 6150 Wattmeter
Bird Termaline 6150 Wattmeter. This is a 30~500 MHz unit, in good working condition, both on HI and LOW power. Approx. Weight: 9 lbs. Approx. Dims: 11x6x4

133
Tektronix 475M Oscilloscope
Tektronix 475M Oscilloscope, 200 MHz, in good working condition with 4 non-Tek probes. Very clean unit. Approx. Weight: 27 lbs. Approx. Dims: 20x12x6

134
"Almost All" Drake Digital Frequency Display
Drake Digital Frequency Display for Drake C-Line by Almost All Digital Electronics. This unit is in good working condition. You will need to supply your own DC power cord. Approx. Weight: 1 lb. Approx. Dims: 4x4x2

135
W2IHY EQplus Processor
W2IHY EQplus Processor. This unit appears to be in excellent cosmetic condition, however, no testing was performed due to the fact that no cable are present. Approx. Weight: 4 lbs. Approx. Dims: 9x6x4

136
Trans-Key Keyer
Trans-Key Keyer. This unit was untested due to not having the appropriate power connector. Approx. Weight: 2 lbs. Approx. Dims: 7x4x1

137
Heathkit R.F. Generator
Heathkit R.F. Generator in overall good cosmetic condition, as shown. All functions work on all bands. Approx. Weight: 4 lbs. Approx. Dims: 10x4x6

138
Heathkit BE-4 Battery Eliminator
Heathkit BE-4 Battery Eliminator in fair to good cosmetic condition. This unit basically works, however, the meter is a bit erratic, but voltages measure from just under 6V to over 16V with adjustment. Approx. Weight: 15 lbs. Approx. Dims: 13x8x7

139
Heathkit SG-7 R.F. Signal Generator
Heathkit SG-7 R.F. Signal Generator in overall good cosmetic condition. The generator works, but the output signal is distorted. Power consumption is 8W at 117VAC. Approx. Weight: 8 lbs. Approx. Dims: 10x7x6

140
Heathkit C-3 Condenser Checker
Heathkit C-3 Condenser Checker in overall good cosmetic condition. This unit will need some work, as the eye tube is very dim (only visible in dark room) and does not indicate capacitance or leakage. Power consumption is 14W at 117VAC. Approx. Weig...

141
Heathkit HP-23C Power Supply
Heathkit HP-23C Power Supply, as shown. Filter caps are bad, transformer is ok. Bottom cover is missing. Approx. Weight: 15 lbs. Approx. Dims: 10x6x5

142
Ten-Tec KR50 Morse Code Keyer
Ten-Tec KR50 Morse Code Keyer, as shown, in working condition. Approx. Weight: 2 lbs. Approx. Dims: 8x6x3

143
Heathkit GD-125 Q Multiplier
Heathkit GD-125 Q Multiplier, as shown. This unit does power up, but no further testing was performed. Power consumption is 4W at 117VAC. Approx. Weight: 2 lbs. Approx. Dims: 9x4x3

144
Kenwood PS-30 DC Power Supply
Kenwood PS-30 DC Power Supply. This unit is in fair cosmetic condition with some corrosion to the cabinet and rear panel, as shown. It is unregulated with 15V output, however, it drops to zero with a load. Some work will need to be done. Approx. Wei...

145
Lafayette 99-33094 Antenna Impedance Meter
Lafayette 99-33094 Antenna Impedance Meter in good working condition. Approx. Weight: 3 lbs. Approx. Dims: 10x5x3

146
ICOM IC-PS30 Power Supply
ICOM IC-PS30 Power Supply in good working condition. Tested with 20A load with no issues. Approx. Weight: 11 lbs. Approx. Dims: 12x10x5

147
ICOM IC-SP3 External Speaker
ICOM IC-SP3 External Speaker, as shown. In working condition, however, the input connector is intermittent. Approx. Weight: 5 lbs. Approx. Dims: 11x7x5

148
Heathkit SB-620 Scanalyzer
Heathkit SB-620 Scanalyzer in good working as well as cosmetic condition, as shown. Uses 455 KHz IF. Approx. Weight: 10 lbs. Approx. Dims: 11x10x8

149
Galaxy CW Monitor
Galaxy CW Monitor in good working condition. Some corrosion to the case, as shown. Approx. Weight: 1 lb. Approx. Dims: 5x3x7

150
Galaxy 300~ Filter F-3
Galaxy 300~ Filter F-3. There is some corrosion to the case, as shown. This unit appears to be non-operational. Approx. Weight: 2 lbs. Approx. Dims: 7x4x3

151
Staco 3PN1010 Variable Autotransformer
Staco 3PN1010 Variable Autotransformer in good working condition, as shown. Approx. Weight: 11 lbs. Approx. Dims: 7x6x5

152
B&K 282 Digital Multimeter
B&K 282 Digital Multimeter in good working condition, as shown. Approx. Weight: 4 lbs. Approx. Dims: 10x9x4

153
GE Electronic Tubes Advertising Display
GE Electronic Tubes Advertising Display. In very good cosmetic condition, as shown. Only the two tubes included, are pictured. Approx. Weight: 5 lbs. Approx. Dims: 18x9x2

154
Two Eimac 3-500Z Electron Tubes NIB
Two Eimac 3-500Z Electron Tubes NIB, NOS. As shown. Unopened. Codes on top of both boxes are stamped 7837. Approx. Weight: 1.5 lbs. each Approx. Dims: 11x7x7 each

155
4-1000A Transmitting Tube
4-1000A Transmitting Tube. In good condition, appears to have been used, filaments are good! Approx. Weight: 2 lbs. Approx. Dims: 9 x 5 inch dia.

156
Western Electric KS-15750-L1 Tube Tester
Hickok Western Electric KS-15750-L1 Tube Tester. This tester is in good overall cosmetic condition, and built like a tank! That being said, you can set the line/zero it, however, it does not indicate bias voltage nor does it indicate tube test result...

157
Eico 625 Tube Tester
Eico 625 Tube Tester in good overall cosmetic as well as working condition. Tested with known good tube. Approx. Weight: 9 lbs. Approx. Dims: 13x10x4

158
Precision 900 Tube Tester
Precision 900 Tube Tester. You can set the line adjust but this tester will not indicate any tube measurements. Approx. Weight: 13 lbs. Approx. Dims: 15x13x6

159
Precision 612 Tube & Battery Tester
Precision 612 Tube & Battery Tester. You can set the line adjust but this tester will not indicate any tube measurements. Approx. Weight: 14 lbs. Approx. Dims: 15x13x6

160
Triplet 3413-A Tube Tester
Triplet 3413-A Tube Tester. Nice looking tester, however, the meter needle is bent, thus, no testing was performed. The unit powers up and draws about 11W at 117VAC. Approx. Weight: 15 lbs. Approx. Dims: 15x12x7

161
Hickok 600A Tube Tester
Hickok 600A Tube Tester in good overall cosmetic condition. The unit does zero with no problems, and testing is fine, however, some calibration may be needed, as a few tubes tested somewhat low, compared to a calibrated TV-7. Power consumption is 24...

162
Jackson 636C Tube Tester
Jackson 636C Tube Tester in good overall cosmetic as well as working condition. Meter line adjust OK, as well as testing a few known good tubes. Power consumption is 3W at 117VAC. Approx. Weight: 12 lbs. Approx. Dims: 13x10x7

163
PA Amplifier, maker unknown
PA Amplifier, maker unknown. This cool looking unit uses a single ended 6V6 and is in working condition. With carry case and all of the accessories shown. The chrome and red marking may indicate that it is an RCA model. Approx. Weight: 29 lbs. Appro...

164
Heil Gold Elite Microphone
Heil Gold Elite Microphone in good working condition. Includes 8-pin DIN cable for use with ICOM rigs, i.e., IC-7410, IC-7600, etc. Approx. Weight: 2 lbs. Approx. Dims: 11x5x3

165
Palstar SP30B 5 Watt Communication Speaker
Palstar SP30B 5 Watt Communication Speaker in good working condition. Cosmetic condition is very good, as shown. Approx. Weight 2 lbs. Approx. Dims: 7x7x5

166
Electro Voice 630 Microphone
Electro Voice 630 Microphone in good working and looking condition. 4-pin DIN connector included with cable. Approx. Weight: 5 lbs.

167
Astatic D-104 Microphone & G Stand
Astatic D-104 Microphone & G Stand. In good working condition. No connector, just a connector housing attached. The chrome is very good to excellent, the base does show some scuffs/scratches. Approx. Weight: 3 lbs.

168
Astatic D-104 Microphone & G Stand
Astatic D-104 Microphone & G Stand in good working and looking condition. Chrome and base look great! No connector included. Approx. Weight: 3 lbs.

169
Astatic D-104 Microphone & G Stand
Astatic D-104 Microphone & G Stand. Another nice example of this classic mic. In good working as well as looking condition. Two pin mic connector included. A few minor scuffs are present on the back side of the mic head. Approx. Weight: 3 lbs.

170
Shure 444 Microphone
Shure 444 Microphone in good working condition with a 3/16' PL-68 phono (Collins) connector. The head/neck of the mic extend and contract with no issues. Cosmetically, in fair/good condition with some scrapes/scratches and the left rear corner plas...

171
Electro-Voice 619 Dynamic Microphone
Electro-Voice 619 Dynamic Microphone in very good overall working and looking condition! Includes 1/4' stereo phono connector. Approx. Weight: 3 lbs.

172
Turner 256 Hi-Z Crystal Microphone
Turner 256 Hi-Z Crystal Microphone. This mic is in good to very good cosmetic condition, however, there is no output. No connector is included. Approx. Weight: 3 lbs.

173
Electro-Voice 623 Microphone
Electro-Voice 623 Microphone in good to very good overall cosmetic condition, however, there is no output. Cord/connector not included. The base is a model 763D and is heavy cast metal. Approx. Weight: 5 lbs.

174
Heil HS-2 Ergonomic Hand Switch
Heil HS-2 Ergonomic Hand Switch in good working condition with original box. Approx. Weight: 1 lb. Approx. Dims: 7x4x2

175
Astatic 200 Crystal Bullet Microphone
Astatic 200 Crystal Bullet Microphone in good working condition. Some scuffs and scratches, but for a 1940's era mic, in good cosmetic condition. No connector is included. Approx. Weight: 2 lbs.

176
Turner Plus Three Microphone
Turner Plus Three Microphone in good working as well as cosmetic condition. With 4-pin DIN connector. You will need to supply a 9V transistor battery. Approx. Weight: 3 lbs.

177
Hy-Gain T2X Tailtwister Control, Rotor, Cable
Hy-Gain T2X Tailtwister Control, Rotor, Cable. The rotor and controller have been well used, and was removed from use from in working condition. We did not independently test this unit. The screw terminals on the bottom of the unit are corroded and o...

178
Yaesu NC-8 AC Power Supply & Charger
Yaesu NC-8 AC Power Supply & Charger. Powers up, but no further testing was done. Approx. Weight: 4 lbs. Approx. Dims: 7x7x4

179
ICOM IC-290H Transceiver
ICOM IC-290H Transceiver in fair, used cosmetic condition. This unit produces about 20W power output. Receive sensitivity is about 0.7 uv. Mic, power cord and manual included. Approx. Weight: 8 lbs. Approx. Dims: 9x7x3

180
ICOM IC-25A Transceiver
ICOM IC-25A Transceiver in fair, used condition cosmetically. This unit produces about 18-20W power output. However, there is no audio output. Mic and manual included. Approx. Weight: 5 lbs. Approx. Dims: 9x6x2

181
Ray Jefferson 789 Marine VHF/FM Transceiver
Ray Jefferson 789 Marine VHF/FM Transceiver. Powers up, but no further testing was done. Approx. Weight: 4 lbs.