Mechanical Contractor Online Auction
Previous Page Listing ID#: 208107

Auction Location
Mayville, North Dakota
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Thursday Jun 25, 10:00 AM
Bidding Ends: Tuesday Jun 30, 09:00 AM
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Resource Auction

Website: www.resourceauction.com

GoToAuction.com ID#: 6144
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

READ ALL OF THE FOLLOWING AUCTION TERMS & CONDITIONS CAREFULLY

NOTE: THERE WILL BE A 10% INTERNET BUYERS PREMIUM CAPPED AT $1,000 PER UNIT ON THIS AUCTION.

NOTE: BY ACCEPTING THESE TERMS AND CONDITIONS, YOU AGREE THAT IF YOU ARE THE WINNING BIDDER ON A LOT, YOU ENTER A LEGALLY BINDING CONTRACT TO PURCHASE THAT LOT UNDER THE UNIFORM COMMERCIAL CODE.  FURTHERMORE,  IF YOU DON'T PAY FOR THE LOT, YOU WILL BE SUBJECT TO LEGAL ACTION. 

*SUCCESSFUL INTERNET BIDDERS WILL BE NOTIFIED "BY EMAIL" WITHIN A REASONABLE AMOUNT OF TIME FOLLOWING THE AUCTION

*WHILE PHOTOS ARE PROVIDED AS A COURTESY, WE RECOMMEND A PERSONAL INSPECTION. ALL ITEMS ARE SOLD AS IS WHERE IS.

• You must register with Resource Auction & Next Lot, Inc. to bid and agree to comply with all required requests

• All purchases are in US Funds. Payable in cash, cashier’s check, wire transfer, approved domestic check w/bank letter of credit, you furthermore agree not to stop payment on same check and to pay any associated legal costs including attorney fees, interests, costs and related expenses involved with any collection on your part. Partial payment on partial pull-out is not allowed.

• International purchases must be paid by wire transfer. A wire fee will be added to the same. Some Canadian purchases may be paid by official bank draft or cashier's check.

• Customers obtaining financing must do so in advance and provide that information in advance.

• You are responsible for all purchases made with your bidding number - Regardless As To Who Uses It.

• Resource Auction reserves the right to hold all units in our or our sellers’ possession for payment until funds clear our account.

• Sellers and auctioneers are not responsible for errors or omissions in auction listings.

*Resource Auction does not warrant the condition of the equipment or units sold, nor the accuracy of meter readings or descriptions and to the extent that there is any claim asserted the damages are limited to the purchase price of the affected unit. Where possible, serial numbers and vehicle identification numbers are available to complete your inspection.

• Printed material both auction day and in previous advertising is provided as a guide only and may contain certain inaccuracies. You must make your own inspection of each unit and base your bidding and/or purchases accordingly. Resource Auction makes no representations or warranties, express or implied, regarding equipment, without limitation, its performance, merchantability or fitness for a  particular purpose.

*You are responsible for each item you purchase, regardless to published information regarding year of manufacture, model, machine or engine hours, physical condition, options and features and All Units Are Sold As Is/Where Is.

*Statements made auction day take precedence over all advertising

• Auctioneers, their employes and sellers are not responsible for lost or stolen articles. Once you purchase an item from the auction block, it becomes your responsibility - Paid For Or Not.

• Please be advised that there is heavy equipment and vehicles moving about. This is a High Activity Area. Sellers, owners and auctioneers are not responsible for accidents or injury to person or property on premises, or on or near equipment and vehicles.

• Please do not remove shields or covers from equipment without putting them back in place.

• Sale order is at our discretion and may differ from previously viewed material.

*SALES TAX MAY APPLY ON CERTAIN UNITS IN CERTAIN CIRCUMSTANCES.

*THERE WILL BE A $30 DOCUMENT FEE ON ALL TITLED VEHICLES

*FOR AUCTIONS INVOLVING FIREARMS ALL BUYERS MUST COMPLETE ATF FORM 4473 WITH THE FFL ON HAND.  FIREARMS BUYERS MUST COMPLY WITH ALL STATE, & FEDERAL REGULATIONS AS REQIRED BY THE FFL & ATF.

LOAD OUT INFORMATION: YOU MUST HAVE PAID RECEIPTS FOR LOADING

For Consignment and Dealer Auctions:

• Loading is from 8 a.m. to 4 p.m. Monday thru Friday, Saturdays only if indicated

• No loading after dark • Closed all Sundays and Holidays

• Unless otherwise indicated, all items must be removed in 7 days, if not fees may incur

For Auctions at Sellers’ Locations:

• Load out times, dates and availability must be arranged in advance with seller and will be per sale day announcements

• All items must be removed in 15 days, unless other arrangements have been made

IMPORTANT: Units left after the stated removal date will be moved to a storage lot and will be assessed a $50/day per item fee for storage.


Listing Information

1
ALADDIN 14-430 220V HOT PRESSURE WASHER, 4 WHEEL CART, SOAP CONTROL, HOSE REEL

2
HYD FLOOR JACK

3
HYD FLOOR JACK W/CROSS BEAM

4
HYD FLOOR JACK W/CROSS BEAM

5
2) TRIPOD LIGHTS

6
3) TRIPOD LIGHTS

7
2007 EASTEY HEAT TUNNEL SHRINK WRAP MACHINE – SINGLE PHASE, 220 VOLT, DIGITAL TEMPERATURE CONTROL, MODEL ET1610-48, SN 54748TLMB
2007 EASTEY HEAT TUNNEL SHRINK WRAP MACHINE – SINGLE PHASE, 220 VOLT, DIGITAL TEMPERATURE CONTROL, MODEL ET1610-48, SN 54748TLMB

8
2)FANS ON STANDS

9
MENARDS KDS-25-4559 MILL DRILL 110V W/TABLE

10
JET 10” JWTS-10 TABLE SAW

11
ROLAIR 1.5HP 9-GAL PORTABLE AIR COMPRESSOR, 110V ELEC MOTOR

12
ROLAIR 1.5HP 9-GAL PORTABLE AIR COMPRESSOR, 110V ELEC MOTOR

13
QTY OF WELDING LEADS

14
8)MACHINE DOLLIES, 2) OVERHEAD TROLLEYS

15
WELDING RODS, REGULATORS

16
WELDING RODS

17
GAS LINES FOR WELDERS

17
5)WELDING LEADS

18
10)WELDING LEADS

18
5)WELDING LEADS

19
16-GAL SHOP VAC

20
MILLERMATC 200 WELDER

21
MILLER DYNASTY 200 WELDER

22
MILLERMATIC 200 WELDER

23
HYPERTHERM POWERAX 85 PLASMA CUTTER

24
HYPERTHERM POWERMAX 85 PLASMA CUTTER

25
HYPERTHERM POWERMAX 85 PLASMA CUTTER

26
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

27
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

28
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

28
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

29
MILLER XMP 304 WELDER

30
MILLER EXTREAM 360 WELDER

31
MILLER EXTREAM 360 WELDER

32
MILLER MAXSTAR 150 STL

33
MILLER MAXSTAR 150 STL

34
MILLER MAXSTAR 150 STL

35
MILLER MAXSTAR 150 STL

36
MILLER MAXSTAR 150 STL

37
MILLER MAXSTAR 150 STL

38
MILLER SUITCASE XTREAM 12DS

39
MILLER SUITCASE XTREAM 12DS

40
MILLER SUITCASE XTREAM 12DS

40
MILLER SUITCASE XTREAM 12DS
40A. MILLER SUITCASE XTREAM 12DS

41
LINCOLN AC 225 ARC WELDER 220V

42
ESAB MIGMASTER 250 220V WIRE WELDER

43
MILLER TRAILBLAZER 325 DC WELDER, 12,000 W GENERATOR W/ 4 WHEEL CART

44
HEAT STAR 175,00 BTU OIL HEATER

45
JET JDP-17MF DRILL PRESS, 110V, VISE
JET JDP-17MF DRILL PRESS, 110V, VISE

46
MILWAUKEE DIAMOND CORE DRILL W/ LARGE BASE STAND – 2” TO 10”, 1 ¼ – 7 SPINDLE THREAD, SN#798C314260018
MILWAUKEE DIAMOND CORE DRILL W/ LARGE BASE STAND – 2” TO 10”, 1 ¼ – 7 SPINDLE THREAD, SN#798C314260018

47
HARDWARE CABINET, SHEET METAL SCREWS, SET SCREWS, GREASE ZIKRS

48
2) HARDWARE CABINETS, COTTER KEYS, ROLL PINS, MACHINE SCREWS

49
BOLT BIN W/ MISC. HARDWARE

50
2)BOLT BINS W/ ALLEN HEAD SAE BOLTS, SAE NUTS, LOCK WASHERS

51
2) BOLT BINS W/ ALLEN HEAD SAE BOLTS

52
2) BOLT BINS W/ HEX HEAD SAE GRADE 5 BOLTS

53
2) BOLT BINS W/ HEX HEAD SAE GRADE 5 FINE THREAD BOLTS, LOCK WASHERS, NUTS, SEAT TAPER HEAD BOLTS

54
2) BOLTS BONS W/HEX HEAD SAE GRADE 5 FINE & CORSE THREAD BOLTS AND NUTS

55
JIG 2630ES ELECTRIC SCISSOR LIFT, HARD RUBBER TIRES, 25' LIFT,151 HRS, SN#0200214527

56
JLG 2630ES ELECTRIC SCISSOR LIFT, HARD RUBBER TIRES, 25' LIFT 143 HRS, SN#0200209447

57
JLG 450AJ SERIES 2 SKY POWER LIFT, 12/16.5 TIRES, 4X4, 500 LB CAPACITY, MAX HEIGHT 45', MAX REACH 25',1281 HRS, SN#0300164186

58
2015 KUBOTA TRACK SKID STEER SVL-90-2 – HIGH FLOW HYD, NEW 18” BELTS, JOYSTICK CONTROL, 3010 LIFT CAPACITY, 2 SPD, ENCLOSED ROPS W HEAT & AC, HYD Q/A, ONLY 951 HRS, SN#11184
2015 KUBOTA TRACK SKID STEER SVL-90-2 – HIGH FLOW HYD, NEW 18” BELTS, JOYSTICK CONTROL, 3010 LIFT CAPACITY, 2 SPD, ENCLOSED ROPS W HEAT & AC, HYD Q/A, ONLY 951 HRS, SN#11184

58
48" SKID STEER QUICK ATTACH FORKS

58
80" SKID STEER QUICK ATTACH BUCKET WITH CUTTING EDGE
80" SKID STEER QUICK ATTACH BUCKET WITH CUTTING EDGE 

59
2012 MANITOU MT5519 TELEHANDLER, JOYSTICK CONTROL, 2 SPEED, OSCILLATING HEAD, 4WD & CRAB CONTROL, HYD Q/A, ENCLOSED ROPS W/ HEAT & A/C, GEHL 48” 6000# FORKS, 12-16.5 INDUSTRIAL TIRES , ONLY 1156 HRS, SN#YD0725111
2012 MANITOU MT5519 TELEHANDLER, JOYSTICK CONTROL, 2 SPEED, OSCILLATING HEAD, 4WD & CRAB CONTROL,  HYD Q/A, ENCLOSED ROPS W/ HEAT & A/C, GEHL 48” 6000# FORKS, 12-16.5 INDUSTRIAL ...

59
HAUGEN MWP 4x6’ MAN BASKET MESH BOTTOM, FORK TUBES, SIDE DOORS SN#MOO10140
HAUGEN MWP 4x6’ MAN BASKET MESH BOTTOM, FORK TUBES, SIDE DOORS SN#MOO10140

59
HAUGEN FORK ATTACH JIB CRANE, MODEL MIJ, SN#M006592, 143" MAX EXTENSION

60
2010 DODGE RAM 1500 ,4X4, 4 DOOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, RECEIVER HITCH , NERF BARS, 5.7L HEMI, AUTOMATIC, 275/60R20 TIRES, CLOTH INTERIOR, TONE AU COVER, 134001 MI, VIN#1D7RV1CT9AS197377
2010 DODGE RAM 1500 ,4X4, 4 DOOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, RECEIVER HITCH , NERF BARS, 5.7L HEMI, AUTOMATIC, 275/60R20 TIRES, CLOTH INTERIOR, TONE AU COVER, 134001...

61
2011 DODGE RAM 2500 HD LARAMIE, CUMMINS DIESEL, AUTOMATIC, 4 DOOR, LEATHER INTERIOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, 7' BRADFORD BUILT FLATBED, GOOSENECK BALL, 285/70R17 TIRES, 155472 MI, VIN#3D7UT2CL8BG590348
2011 DODGE RAM 2500 HD LARAMIE, CUMMINS DIESEL, AUTOMATIC, 4 DOOR, LEATHER INTERIOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, 7' BRADFORD BUILT FLATBED, GOOSENECK BALL, 285/70R17 ...

61
2014 DODGE 3500 LONGHORN 4X4 DUALLY, 4 DOOR, 6.7L CUMMINS DIESEL, AUTO TRANS, 5TH WHEEL PLATE, LEATHER INT, PWR W & L, DIGITAL DISPLAY W/ BLUETOOTH, HEAT & A/C SEATS, HEATED STEERING WHEEL, BACKUP CAMERA, 235/80R17 TIRES, 95935 MILES, VIN#3C63RRKL1EG16143
2014 DODGE 3500 LONGHORN 4X4 DUALLY, 4 DOOR, 6.7L CUMMINS DIESEL, AUTO TRANS, 5TH WHEEL PLATE, LEATHER INT, PWR W & L, DIGITAL DISPLAY W/ BLUETOOTH, HEAT & A/C SEATS, HEATED STEERING WHEEL,...

62
2014 RC TRAILERS 28' ENCLOSED V NOSE TRAILER,102"WIDE, 85" TALL, REAR RAMP DOOR, SIDE DOOR, ALUM WHEELS, 225/75R15 TIRES, 2 5/6" BALL, ELEC BRAKES, INTERIOR LIGHTS, SHELVS, CABNITS, VIN#56VBE282EM611810
2014 RC TRAILERS 28' ENCLOSED V NOSE TRAILER,102"WIDE, 85" TALL, REAR RAMP DOOR, SIDE DOOR, ALUM WHEELS, 225/75R15 TIRES, 2 5/6" BALL, ELEC BRAKES, INTERIOR LIGHTS, SHELVS, CABNITS, VIN#56VBE282EM6...

63
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, RER RAMP DOOR, SIDE DOOR, STEEL WHEELS, ST225/75R15 TIRES, ELEC BRAKES, 2 5/16" BALLROOF VENT, INTERIOR SHELFS AND BENCH, ELECTRIC HEATER, VIN#56VBE2821DM602414
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, RER RAMP DOOR, SIDE DOOR, STEEL WHEELS, ST225/75R15 TIRES, ELEC BRAKES, 2 5/16" BALLROOF VENT, INTERIOR SHELFS AND BENCH, ELECTRIC HEATE...

64
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIR LIGHTS, INTERIOR SHELVES AND BENCH, VIN#56VBE2823DM602852
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIR LIGHTS, INTERIOR SHELVES AND BENCH, VIN#...

65
2012 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIOR LIGHTS, INTERIOR SHELVES AND BENCH, ELECTRIC BRAKES, VIN#5LABE2828DM117082
2012 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIOR LIGHTS, INTERIOR SHELVES AND BENCH, ELE...

66
PJ 24' DECK OVER TRAILER, 96" WIDE, RAMPS, ELECTRIC BRAKES 245/75R16 TIRES, STEEL WHEELS, TANDEM SINGLES
PJ 24' DECK OVER TRAILER, 96" WIDE, RAMPS, ELECTRIC BRAKES 245/75R16 TIRES,  STEEL WHEELS, TANDEM SINGLES

67
BIG TEX 14LX DUMP TRAILER, 14' LONG, 2' SIDES, REAR SWING DOORS, ELEC OVER HYD HOIST, TOUNG TOOL BOX, 235/80R16 TIRES ON 8 BOLT WHEELS, MESH TARP, SN#16VDX1620F5020020
TEX 14LX DUMP TRAILER, 14' LONG, 2' SIDES, REAR SWING DOORS, ELEC OVER HYD HOIST, TOUNG TOOL BOX, 235/80R16 TIRES ON 8 BOLT WHEELS, MESH TARP, SN#16VDX1620F5020020

68
SHOP BUILT UTLITY TRAILER, 12' LONG 77" WIDE, WOOD DECK, SIDES, FOLD DOWN REAR RAMP,205/75R15 TIRES 5 BOLT WHEELS, SPARE TIRE, LED LIGHTS, TOUNG MOUNT TOOL BOX

68
SHOP BUILT UTLITY TRAILER, 12' LONG 77" WIDE, WOOD DECK, SIDES, FOLD DOWN REAR RAMP,205/75R15 TIRES 5 BOLT WHEELS, SPARE TIRE, LED LIGHTS, TOUNG MOUNT TOOL BOX
SHOP BUILT UTLITY TRAILER, 12' LONG 77" WIDE, WOOD DECK, SIDES, FOLD DOWN REAR RAMP,205/75R15 TIRES 5 BOLT WHEELS, SPARE TIRE, LED LIGHTS, TOUNG MOUNT TOOL BOX (IDENTICAL TRAILER AS 68, ORIGINAL PH...

69
CRAFTSMAN 9 DRAWER ROLLING TOOLBOX, 27" WIDE, 18" DEEP, 40" TALL

69
ASHLEY 1660E WOOD STOVE, 3 YEARS OLD, ELECTRIC BLOWER, W/ ASSORTED STOVE PIPE

70
ASSORTED HAND TOOLS

71
CHICAGO ELECTRIC WELDER CART W/CONTENTS, HOSE, REGULATOR, GROUND CABLE (TANK NOT INCLUDED)
CHICAGO ELECTRIC WELDER CART W/CONTENTS, HOSE, REGULATOR, GROUND CABLE (TANK  NOT INCLUDED)

72
STEEL BANDING CART AND TOOLS,

73
STIHL GAS POWERED CONCRETE SAW W/ 2 BLADES

74
DEWALT CHOP SAW ON STAND

75
DELTA GRINDER ON STAND

76
PALLET OF GRINDER WHEELS, TAPE, WIRE WHEELS FILTER WRENCHES, MAP/PROPANE TORCHES

77
PALLET OF GRINDER WHEELS, FLAP WHEELS, ALLEN WRENCHES, DRILL BITS & MISC.

78
KT METRIC WRENCH SET, PIPE WRENCH, POP RIVET TOOL, METRIC ½” SOCKETS, VISE GRIPS, HOLE SAW, MASONRY BITS, SCREW DRIVERS

79
3/8” METRIC SOCKET SET, TAP AND DIE SET, SNAP RING PLIERS, MISC. SOCKETS, BOSH LASER, ¾” SOCKET SET, SAE ½” IMPACT SOCKET SET,

80
4) TOOLBOXES 3) SMITH TORCH SETS W/ REGULATORS, HOSE, CUTTING HEADS

80
RIDGID 700-T2 ELECTRIC PIPE THREADER, NO DIES
80a. RIDGID 700-T2 ELECTRIC PIPE THREADER, NO DIES

81
ASSORTED HARDWARE

82
CONDUIT BENDER, 2) STRIKING WRENCHES, TOOL BAGS, SOAP STONES, ASSORTED PULLERS, ROPE, TORCH HEAD

83
QTY OF HAMMERS, SAWS, 2) TOOL SETS

84
ASSORTED SAE WRENCHES, DRILL BITS, MASONRY BITS, SCREW DRIVERS

85
CHECK-A-THREAD, RYOBI BENCH GRINDER, IRWIN VISE, TAP AND DIE SET, CENTRAL FORGE PIPE THREADER W/DIES

85
WILLIAMS ¾ SOCKET SET W/ RATCHET, EXTENSION, BREAKER BAR

86
ASSORTED ELECTRICAL CONNECTORS, HEAT SHRINK, WIRE BRUSHES, LEVELS, GLOVES, TIN SNIPS, CASTER WHEELS, PUNCHES AND CHISELS

87
DEWALT CORDED BAND SAW, 2) DEWALT 7” ANGLE GRINDERS, 2) DEWALT 4” ANGLE GRINDERS

88
DEWALT 18V CORDLESS TOOLS, 2) GRINDERS, 4) DRILLS, 2) BATTERIES, 2 CHARGERS, CARRYING BAG

89
MILWAUKEE CORDED TOOLS, CIRCULAR SAW, DRILL, 2) 4” ANGLE GRINDERS

90
MILWAUKEE CORDED TOOLS, 7” ANGLE GRINDER, 4” ANGLE GRINDER, 2) DIE GRINDERS

91
MILWAUKEE CORDED GRINDERS, 3) 4” GRINDERS, 1) 7” GRINDER

92
MILWAUKEE CORDED TOOLS, 2) DRILLS, 1) DIE GRINDER

93
MILWAUKEE CORDLESS TOOLS, SAWZALL, LIGHT, CIRCULAR SAW, DRILL, IMPACT DRIVER, GRINDER, 7) BATTERIES, 2) CHARGERS, 2) CARRYING BAGS

94
MILWAUKEE CORDLESS TOOLS, SAWZALL, LIGHT, CIRCULAR SAW, DRILL, IMPACT DRIVER, GRINDER, 7 BATTERIES, 2) CHARGERS, 2) CARRYING BAGS

95
MAKITA 4” GRINDER, BOSH HAMMER DRILL, MACHE V ELECTRIC HAMMER

96
2) BOSCH HAMMER DRILLS, DRILL, 2) 4” GRINDERS
2) BOSCH HAMMER DRILLS, DRILL, 2) 4” GRINDERS

97
DREMEL TOOL, METABO SCREW GUN, BLACK AND DECKER ROTARY TOOL, CRAFTSMAN 19.2 V DRILL AND BATTERY, LINCOLN ELECTRIC GREASE GUN

98
MILWAUKEE MAGNETIC DRILL PRESS W/ ASSORTED ANNULAR CUTTERS

99
MILWAUKEE MAGNETIC DRILL PRESS W/ ASSORTED ANNULAR CUTTERS AND CHUCK

100
MILWAUKEE MAGNETIC DRILL PRESS W/ ASSORTED ANNULAR CUTTERS

101
MILWAUKEE M12 CORDLESS INSPECTION CAMERA W/ CHARGER AND BATTERY

102
MILWAUKEE 90 DEGREE CORDED ANGLE DRILL

103
MILWAUKEE M18 FUEL ½” IMPACT W/ BATTERY AND CHARGER

104
BOSCH HAMMER DRILL W/ BITS

105
BOSCH HAMMER DRILL

106
BOSCH HAMMER DRILL W/ BITS

107
BOSCH HAMMER DRILL

108
WEN HEAT GUN

109
MASTER HAND JIG SAW

110
BLACK & DECKER 12V DRILL, LIGHT, 2) BATTERIES AND 1) CHARGER
BLACK & DECKER 12V DRILL, LIGHT, 2) BATTERIES AND 1) CHARGER

110
ALLIGATOR RSC187 BELT SPLICING TOOL

111
WELLER SOLDERING GUN

111
EASY TAPPER HOT PIPE TAP

112
CHICAGO PNEUMATIC 1” IMPACT GUN

113
RIDGID RATCHETING PIPE THREADER W/ DIES,

114
RIDGID RATCHETING PIPE THREADER W/DIES

115
DEWALT RECIPROCATING SAW

116
MILWAUKEE HOLE SAW SET

117
MILWAUKEE CORDED DRILL

118
MILWAUKEE M18 FUEL CORDLESS BAND SAW W/ CHARGER AND BATTERY

119
MILWAUKEE M18 FUEL CORDLESS BAND SAW W/CHARGER AND BATTERY

120
MILWAUKEE CORDED BAND SAW

121
MILWAUKEE CORDED BAND SAW

122
STEEL WORK BENCH ON CASTER WHEELS, 24' LONG,33" WIDE, 40" TALL
STEEL WORK BENCH ON CASTER WHEELS

123
ASSORTED RATCHET STRAPS

124
TARPS, CABLE, ROPE, FLASHLIGHTS, PAILS,

125
ASSORTED SOCKETS, CREW DRIVERS, COMBINATION WRENCHES, TEKTON ANGLE WRENCH SET, 1 5/16” – 1 ½”

126
BIN LIFTER, HOSE, FLANGES, MISC.

127
AIR TOOLS, WEATHERSTRIPPING, GRINDER WHEELS MASONRY BITS, PULLEYS,

128
TOOLBOX WITH CONTENTS 2) BOXES MISC HAND TOOLS, 2) PAILS
TOOLBOX WITH CONTENTS, 2) BOXES MISC HAND TOOLS, 2) PAILS

129
FACE SHIELDS, VESTS, HARDHATS, FACE MASKS

130
3) POSI LOCK PULLERS, STEEL SHAFT, CLAMPS. FLAG, RTV SEALANT

131
MICROWAVE, OVERHEAD PROJECTOR, CLEANING PRODUCTS, ELECTRONIC SCALE, STEEL STOOL,

132
2) LEVER CHAIN HOISTS, 5) CHAIN HOISTS, 2) BEAM CLAMPS

133
MISC. HARDWARE

134
PALLET RACKING 37' WIDE, 4' DEEP, 16' TALL

135
LAWSON BOLT BIN W/ ASSORTED GRADE 8 SAE CORSE THREAD BOLTS

136
4) SHELVING UNITS,

137
3) WIRE SHELVES

138
2 WHEEL DOLLY

139
18) LIGHTS

140
ASSORTED SAFETY HARNESSES

141
ASSORTED 220V POWER CORDS,

142
TEKTON AIR HOSE REEL, MANUAL HOSE REEL, ASSORTED AIR HOSE AND FITTINGS

143
TORCH CART

143
TORCH CART

144
TORCH CART

145
TORCH CART W/HOSES/ SMITH REGULATORS AND CUTTING HEAD

146
TORCH CART

147
TORCH CART W/ HOSES / SMITH REGULATORS AND CUTTING HEAD, TORCH CART (TANKS NOT INCLUDED)

148
TORCH CART

149
TOTE OF ASSORTED ELECTRICAL BOXES, CONDUIT PARTS, WIRE,

150
2) CRATES OF PAINT SUPPLIES, ROLLERS, ROLLER TRAYS

151
ASSORTED PAINT

152
2) RIDGID PIPE VISE STANDS, ASSORTED FOLD-A-JACK STANDS

153
2) RIDGID PIPE VISE STANDS, ASSORTED FOLD-A-JACK STANDS

154
2) RIDGID PIPE VISE STANDS, ASSORTED FOLD-A-JACK STANDS

155
STEEL CABINET AND ORGANIZERS

156
4 WHEEL BAGGAGE CART W/ CONTENTS

157
QUINCY 2 STAGE 5 HP 60-GAL AIR COMPRESSOR, 230V 1 PHASE

157
4 WHEEL BAGGAGE CART (MOWER NOT INCLUDED)

158
2) ST205/75R15 TRAILER TIRES ON 6 BOLT WHEELS

159
PORTABLE AIR TANK,

160
FUEL TRANSFER TANK W/ GPI 12V PUMP, HOSE, AUTO SHUT OFF NOZZLE,

161
ASSORTED STEEL

162
HOMELITE WEED EATER(NEEDS REPAIR), 48” FORK
HOMELITE WEED EATER (NEEDS REPAIR), 48” FORK

163
TRAILER MOVER TO FIT FORKS

164
PERFORMAX BALL BEARING TOOL CHEST, 2 DRAWER FILE CABINET, BUYERS UNDER BODY BOX,

165
3) OVERHEAD TROLLEYS, 13 BEAM CLAMPS

166
5) WATER FIRE EXTINGUISHERS, SMALL FIRE EXTINGUISHERS, LEVELS, SQUARES, FAN

167
ASSORTED STEEL

168
3) SHOP CREEPERS

169
RACK WITH CONTENTS

170
STEEL CART ON CASTERS W/CONTENTS

171
4 WHEEL CART

172
PIPE CART

173
PIPE CART

174
PIPE CART

175
GRASSHOPPER PIPE DOLLY

176
PIPE CART

176
PIPE CART

177
SAFETY CONES

178
CARDBOARD BOXES

179
CAULKING, GLUE GUN, GLUE STICKS, WELDING CURTIN, ROPE

180
2) JUSTRITE 5 GAL FUEL CANS,MISC. GRINDER WHEELS, PAINT SUPPLIES, HARDWARE, IMPACT SOCKETS, GREASE GUN
2) JUSTRITE 5 GAL FUEL CANS, MISC. GRINDER WHEELS, PAINT SUPPLIES, HARDWARE, IMPACT SOCKETS, GREASE GUN

181
OVERHEAD TROLLY, 5) HYD BOTTLE JACKS, 2) FOLDABLE SAWHORSES, ASSORTED CHAIN HOIST, BEAM CLAMPS

182
PAINTING SUPPLIES

183
WEED BURNER, TORCH HOSES,

184
EXTENSION CORDS

185
WELDING LEADS

186
TAC BOARD, WHITE BOARD, FOLDING CHAIRS

187
2) JUSTRITE 5 GAL FUEL CANS,OIL, FILTERS DUST PANS

188
PLASTIC TARPS, RAMPS, WHEEL CHOCKS

189
MOP BUCKET, SPRAYER, TRIPOD, WATER COOLER

190
HARNESSES

191
2) JUSTRITE 5 GAL FUEL CANS,MISC. SHOP SUPPLIES, PAINT, CLEANERS, CAULKING,

192
2) JUSTRITE 5 GAL FUEL CANS,OIL, GAS CANS, PAIL PUMPS, GREASE GUNS

193
CONDUIT, STEEL

194
PEG BOARD ORGANIZERS, BELTING, HOSE,

195
2) JUSTRITE 5 GAL FUEL CANS,GAS CANS, DRIP PANS

196
2) JUSTRITE 5 GAL FUEL CANS,CAULKING, SHOP SUPPLIES,

197
2) JUSTRITE 5 GAL FUEL CANS, PLASTICGAS CANS
2) JUSTRITE 5 GAL FUEL CANS, PLASTIC GAS CANS

198
BROOMS, MOPS, SHOVEL

199
SHOVELS, BROOMS

200
MY-TE AC36B 3000 LB 110V ELECTRIC WINCH

201
PALLET JACK

202
PALLET JACK

203
PALLET JACK

204
PALLET JACK

204
PALLET JACK

205
PALLET JACK

205
PALLET JACK

206
2 WHEEL DOLLY

207
2 WHEEL DOLLY

208
2 WHEEL DOLLY

209
2 WHEEL DOLLY

210
PAINT, OIL, 2) SMALL TIRES

211
2) STEEL FOLDABLE SAWHORSES, SAFETY HARNESSES

211
JET 2 TON CHAIN HOIST

212
5) CHAIN HOISTS

212
JET 1.5 TON CHAIN HOIST

212
JET 2 TON CHAIN HOIST

212
MAGNA 1.5 TON LEVER CHAIN HOIST

213
3) CHAIN HOISTS, 4 ) SMALLER LEVER CHAIN HOISTS, CLEVISIS, LIFTING CHAIN, MISC

213
JET 1.5 TON CHAIN HOIST

213
NEW IN BOX JET 1.5 TON CHAIN HOIST

213
MAGNA 2 TON CHAIN HOIST

214
SHOP MAGNET

215
TORIN PORTA POWER

216
WELDING WIRE

217
PAD TAMPER W/ HONDA 4.0 ENGINE

218
JACKSON WHEELBARROW

219
FOLDING CHAIR CART, TARP, STANDS

220
SHOP VAC, ELEC MOTOR, SHOP SUPPLIES

221
ASSORTED PNEUMATIC PARTS, RATCHET STRAPS

222
DUST BLOWER

223
DOOR DOLLY

224
METAL STANDS

225
BLACK WIDOW SHOP CART 2 DRAWER

225
WILLIAMS TOOL SET, SAE & METRIC 1/2" DRIVE SOCKET SETS, SAE & METRIC 3/8" SOCKET SETS, 2)LOCKING PLIERS, 2)HAMMERS, 2) PRY BARS, ASSORTED NUTDRIVERS AND SREW DRIVERS, SAE & METRIC WRENCHES
WILLIAMS TOOL SET, SAE & METRIC 1/2" DRIVE SOCKET SETS, SAE & METRIC 3/8" SOCKET SETS, 2)LOCKING PLIERS, 2)HAMMERS, 2) PRY BARS, ASSORTED NUTDRIVERS AND SREW DRIVERS, SAE & METRIC WRENCHES

226
PARTIAL BARREL OF 15W40 OIL W/PUMP

227
TOOL SHOP PARTS WASHER

228
SHELVING UNIT, 8' WIDE, 2' DEEP, 7' TALL
SHELVING UNIT 8' WIDE, 2' DEEP, 7' TALL

229
ASSORTED THREADED ROD AND ORGANIZERS

230
MISC. HARDWARE, CABLE, BRACKETS

231
CHOP SAW, PLASTIC

232
TAR PAPER, STRETCH WRAP, TOOL BOX, TIE DOWN STRAPS

233
2) RIDGID PIPE VISE STANDS

234
PRONTO ELECTRIC WHEEL CHAIR, CONDITION U/K

235
PIPE FLANGES

236
MOTORS, VALVES

237
LARGE STEEL FITTINGS

237
ASSORTED PLASTIC

238
ASSORTED PIPE FLANGES

239
FITTINGS, TOOL BUCKETS, CHAIN BINDERS, DAYTON DIAPHRAGM PUMP

240
FIRE EXTINGUISHERS, WHITE BOARD, WATER COOLERS

241
GARDEN HOSES, ROPE

242
ASSORTED HARNESSES, SINK, BLUEPRINT TUBES,

243
3) ROLLER STANDS

244
CRANE PADS

245
FLANGE GASKETS, FOAM, GASKET PAPER

246
PIPE FLANGES, PIPE HANGERS

247
VALVES, FITTINGS

248
2)PIPE DEFROSTERS

249
WIRE, ELECTRICAL CONNECTIONS

250
ELECTRICAL CORDS, HARNESS

251
CABLE PULLERS, BOAT GAS TANKS, CHAIN HOIST, MISC.

252
6)WELDING LEADS

252
5)WELDING LEADS

253
BELTING, FANS

254
PIPE FLANGES

255
2)HANDY MAN JACKS, SMITH TORCH SET, TORCH PARTS, HYD JACK, JACK STAND PARTS, LEVER HOIST, CHAIN HOIST

256
CABINETS, PLASTIC, VENT HOSE, FIRE EXTINGUISHER

257
ROPE

258
EXTENSION CORDS

259
HARNESSES, OXY/ACETYLENE HOSE, AIR HOSE,

260
7) SUMNER PRO-ROLL PIPE STANDS

261
BILJAX SCAFFOLDING, 22) UPRIGHTS, 5) PLANKS, ASSORTED CROSSMEMBERS AND WHEELS

262
WERNER 24' EXTENSION LADDER

263
WERNER 24' EXTENSION LADDER

265
WERNER 6' STEP LADDER, WERNER 10' STEP LADDER

266
2)SMALL STEP LADDERS, HUSKY 6' STEP LADDER, WERNER 6' STEP LADDER

267
WERNER 8' STEP LADDER (NEEDS REPAIR), WERNER 10' STEP LADDER

268
WERNER 6' STEP LADDER, WERNER 24' EXTENSION LADDER

269
WERNER 6' STEP LADDER, WERNER 12' STEP LADDER

270
WERNER 6' STEP LADDER, KELLER 8' STEP LADDER

271
WERNER 8' STEP LADDER, WERNER 10' STEP LADDER

272
WERNER 24' EXTENSION LADDER

273
RIGID PIPE VISE STAND, 11) SUMMNER PIPE STANDS

273
RIGID PIPE VISE STAND, 11) SUMMNER PIPE STANDS

274
ASSORTED 4X8 SHEETS OF PLYWOOD AND OSB, TARP, PVC PIPE, INSULATION BOARD

275
KNAACK 2472 JOB MASTER CHEST

276
KNAACK 2472 JOB MASTER CHEST

277
ASSORTED FUSES, DRIVELINE COMPONENTS, COPPER TUBE, DUCT TUBE

278
POWER TROWEL, HONDA ENGINE

279
PORTABLE ELECTRIC CEMENT MIXER

280
CONCRETE FLOATS AND HANDLES

281
BAGS OF SAKRETE AND QUICKRITE, HAND TROWELS, REPAIR STANDS, CONCRETE EDGER, DRUM W/ REBAR STANDS & MISC.
BAGS OF SAKRETE AND QUICKRITE, HAND TROWELS, REPAIR STANDS, CONCRETE EDGER, DRUM W/ REBAR STANDS & MISC.

282
TARPS, ELECTRIC HAMMERS, ROLLER STAND, ROADSIDE EMERGENCY KIT, BELTING, STAKES,MISC

283
TANK CAGE (CONTENTS NOT INCLUDED)
TANK CAGE (CONTENTS NOT INCLUDED)

284
YARDMAN HYDRO LAWN TRACTOR W/DECK, KOHLER 15 HP

285
20' SHIPPING CONTAINER

285
40' SHIPPING CONTAINER

286
2000 GAL FUEL TANK W/ GAS BOY PUMP

287
BETTERBUILT 100 TRANSFER TANK W/HAND PUMP

288
ASSORTED PIPE

289
SCRAP IRON

290
SCRAP IRON

291
WOOD STEEL RACK W/CONTENTS
WOOD STEEL RACK W/CONTENTS

292
WOOD STEEL RACK W/CONTENTS
WOOD STEEL RACK W/CONTENTS

293
POLY TANK

294
ASSORTED HARDWARE, ROLLER STAND

295
ASSORTED CHAIN, HARDWARE, STAKES

296
CONCRETE VIBRATOR

297
CONCRETE VIBRATOR

298
20' 2"X5" MAGNESIUM SCREED

299
8 FIRE EXTINGUISHERS

300
ASSORTED YARD TOOLS, SHOVELS, BROOMS, RAKES

301
SUMP PUMP, HOSE, DISCHARGE HOSE

302
RUBBER BOOTS

303
REBAR BENDER

304
SKID STEER ATTACHMENT ADAPTER

305
12) TRASH CANS

306
FUEL CAN, TARP, BUCKETS

307
4) PATIO CHAIRS

308
4) FOLDING CHAIRS

309
2) OFFICE CHAIRS

310
4) DINING TABLE CHAIRS

311
WOOD SHOP TABLE

312
4) HAND SPRAYERS, LAWN EDGING

313
2)MINI FRIDGES

314
CANON IMAGEPROGRAF IPF785 – SN#BAAS3365
CANON IMAGEPROGRAF IPF785 – SN#BAAS3365

315
DRAFTING TABLE, W/ SHELF, 32”x111”, ***BUYER IS RESPONSIBLE FOR REMOVAL***
DRAFTING TABLE, W/ SHELF, 32”x111”, ***BUYER IS RESPONSIBLE FOR REMOVAL***

316
L SHAPE OFFICE DESK W/ HUTCH, 71”x83”

317
L SHAPE OFFICE DESK W/HUTCH, 71”x83”

318
RECEPTIONIST DESK, 71”X77”
RECEPTIONIST DESK, 71”x77”

319
4) PADDED CHAIRS

320
3)OFFICE CHAIRS

321
5)SMALL FILE CABINETS

322
TWO PADDED CHAIRS

323
WOOD CART AND STOOL

324
JACKSON WHEELBARROW W/ RAIN COATS

325
PLASTIC, SUBWOOFER, WATER HEATER

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Mechanical Contractor Online Auction

Resource Auction

Resource Auction


Contact:
Phone:
Sale Location
Mayville, North Dakota
,
Sale Dates and Times
Sale Terms and Conditions

READ ALL OF THE FOLLOWING AUCTION TERMS & CONDITIONS CAREFULLY

NOTE: THERE WILL BE A 10% INTERNET BUYERS PREMIUM CAPPED AT $1,000 PER UNIT ON THIS AUCTION.

NOTE: BY ACCEPTING THESE TERMS AND CONDITIONS, YOU AGREE THAT IF YOU ARE THE WINNING BIDDER ON A LOT, YOU ENTER A LEGALLY BINDING CONTRACT TO PURCHASE THAT LOT UNDER THE UNIFORM COMMERCIAL CODE.  FURTHERMORE,  IF YOU DON'T PAY FOR THE LOT, YOU WILL BE SUBJECT TO LEGAL ACTION. 

*SUCCESSFUL INTERNET BIDDERS WILL BE NOTIFIED "BY EMAIL" WITHIN A REASONABLE AMOUNT OF TIME FOLLOWING THE AUCTION

*WHILE PHOTOS ARE PROVIDED AS A COURTESY, WE RECOMMEND A PERSONAL INSPECTION. ALL ITEMS ARE SOLD AS IS WHERE IS.

• You must register with Resource Auction & Next Lot, Inc. to bid and agree to comply with all required requests

• All purchases are in US Funds. Payable in cash, cashier’s check, wire transfer, approved domestic check w/bank letter of credit, you furthermore agree not to stop payment on same check and to pay any associated legal costs including attorney fees, interests, costs and related expenses involved with any collection on your part. Partial payment on partial pull-out is not allowed.

• International purchases must be paid by wire transfer. A wire fee will be added to the same. Some Canadian purchases may be paid by official bank draft or cashier's check.

• Customers obtaining financing must do so in advance and provide that information in advance.

• You are responsible for all purchases made with your bidding number - Regardless As To Who Uses It.

• Resource Auction reserves the right to hold all units in our or our sellers’ possession for payment until funds clear our account.

• Sellers and auctioneers are not responsible for errors or omissions in auction listings.

*Resource Auction does not warrant the condition of the equipment or units sold, nor the accuracy of meter readings or descriptions and to the extent that there is any claim asserted the damages are limited to the purchase price of the affected unit. Where possible, serial numbers and vehicle identification numbers are available to complete your inspection.

• Printed material both auction day and in previous advertising is provided as a guide only and may contain certain inaccuracies. You must make your own inspection of each unit and base your bidding and/or purchases accordingly. Resource Auction makes no representations or warranties, express or implied, regarding equipment, without limitation, its performance, merchantability or fitness for a  particular purpose.

*You are responsible for each item you purchase, regardless to published information regarding year of manufacture, model, machine or engine hours, physical condition, options and features and All Units Are Sold As Is/Where Is.

*Statements made auction day take precedence over all advertising

• Auctioneers, their employes and sellers are not responsible for lost or stolen articles. Once you purchase an item from the auction block, it becomes your responsibility - Paid For Or Not.

• Please be advised that there is heavy equipment and vehicles moving about. This is a High Activity Area. Sellers, owners and auctioneers are not responsible for accidents or injury to person or property on premises, or on or near equipment and vehicles.

• Please do not remove shields or covers from equipment without putting them back in place.

• Sale order is at our discretion and may differ from previously viewed material.

*SALES TAX MAY APPLY ON CERTAIN UNITS IN CERTAIN CIRCUMSTANCES.

*THERE WILL BE A $30 DOCUMENT FEE ON ALL TITLED VEHICLES

*FOR AUCTIONS INVOLVING FIREARMS ALL BUYERS MUST COMPLETE ATF FORM 4473 WITH THE FFL ON HAND.  FIREARMS BUYERS MUST COMPLY WITH ALL STATE, & FEDERAL REGULATIONS AS REQIRED BY THE FFL & ATF.

LOAD OUT INFORMATION: YOU MUST HAVE PAID RECEIPTS FOR LOADING

For Consignment and Dealer Auctions:

• Loading is from 8 a.m. to 4 p.m. Monday thru Friday, Saturdays only if indicated

• No loading after dark • Closed all Sundays and Holidays

• Unless otherwise indicated, all items must be removed in 7 days, if not fees may incur

For Auctions at Sellers’ Locations:

• Load out times, dates and availability must be arranged in advance with seller and will be per sale day announcements

• All items must be removed in 15 days, unless other arrangements have been made

IMPORTANT: Units left after the stated removal date will be moved to a storage lot and will be assessed a $50/day per item fee for storage.


Listing Details

1
ALADDIN 14-430 220V HOT PRESSURE WASHER, 4 WHEEL CART, SOAP CONTROL, HOSE REEL

2
HYD FLOOR JACK

3
HYD FLOOR JACK W/CROSS BEAM

4
HYD FLOOR JACK W/CROSS BEAM

5
2) TRIPOD LIGHTS

6
3) TRIPOD LIGHTS

7
2007 EASTEY HEAT TUNNEL SHRINK WRAP MACHINE – SINGLE PHASE, 220 VOLT, DIGITAL TEMPERATURE CONTROL, MODEL ET1610-48, SN 54748TLMB
2007 EASTEY HEAT TUNNEL SHRINK WRAP MACHINE – SINGLE PHASE, 220 VOLT, DIGITAL TEMPERATURE CONTROL, MODEL ET1610-48, SN 54748TLMB

8
2)FANS ON STANDS

9
MENARDS KDS-25-4559 MILL DRILL 110V W/TABLE

10
JET 10” JWTS-10 TABLE SAW

11
ROLAIR 1.5HP 9-GAL PORTABLE AIR COMPRESSOR, 110V ELEC MOTOR

12
ROLAIR 1.5HP 9-GAL PORTABLE AIR COMPRESSOR, 110V ELEC MOTOR

13
QTY OF WELDING LEADS

14
8)MACHINE DOLLIES, 2) OVERHEAD TROLLEYS

15
WELDING RODS, REGULATORS

16
WELDING RODS

17
GAS LINES FOR WELDERS

17
5)WELDING LEADS

18
10)WELDING LEADS

18
5)WELDING LEADS

19
16-GAL SHOP VAC

20
MILLERMATC 200 WELDER

21
MILLER DYNASTY 200 WELDER

22
MILLERMATIC 200 WELDER

23
HYPERTHERM POWERAX 85 PLASMA CUTTER

24
HYPERTHERM POWERMAX 85 PLASMA CUTTER

25
HYPERTHERM POWERMAX 85 PLASMA CUTTER

26
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

27
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

28
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

28
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

29
MILLER XMP 304 WELDER

30
MILLER EXTREAM 360 WELDER

31
MILLER EXTREAM 360 WELDER

32
MILLER MAXSTAR 150 STL

33
MILLER MAXSTAR 150 STL

34
MILLER MAXSTAR 150 STL

35
MILLER MAXSTAR 150 STL

36
MILLER MAXSTAR 150 STL

37
MILLER MAXSTAR 150 STL

38
MILLER SUITCASE XTREAM 12DS

39
MILLER SUITCASE XTREAM 12DS

40
MILLER SUITCASE XTREAM 12DS

40
MILLER SUITCASE XTREAM 12DS
40A. MILLER SUITCASE XTREAM 12DS

41
LINCOLN AC 225 ARC WELDER 220V

42
ESAB MIGMASTER 250 220V WIRE WELDER

43
MILLER TRAILBLAZER 325 DC WELDER, 12,000 W GENERATOR W/ 4 WHEEL CART

44
HEAT STAR 175,00 BTU OIL HEATER

45
JET JDP-17MF DRILL PRESS, 110V, VISE
JET JDP-17MF DRILL PRESS, 110V, VISE

46
MILWAUKEE DIAMOND CORE DRILL W/ LARGE BASE STAND – 2” TO 10”, 1 ¼ – 7 SPINDLE THREAD, SN#798C314260018
MILWAUKEE DIAMOND CORE DRILL W/ LARGE BASE STAND – 2” TO 10”, 1 ¼ – 7 SPINDLE THREAD, SN#798C314260018

47
HARDWARE CABINET, SHEET METAL SCREWS, SET SCREWS, GREASE ZIKRS

48
2) HARDWARE CABINETS, COTTER KEYS, ROLL PINS, MACHINE SCREWS

49
BOLT BIN W/ MISC. HARDWARE

50
2)BOLT BINS W/ ALLEN HEAD SAE BOLTS, SAE NUTS, LOCK WASHERS

51
2) BOLT BINS W/ ALLEN HEAD SAE BOLTS

52
2) BOLT BINS W/ HEX HEAD SAE GRADE 5 BOLTS

53
2) BOLT BINS W/ HEX HEAD SAE GRADE 5 FINE THREAD BOLTS, LOCK WASHERS, NUTS, SEAT TAPER HEAD BOLTS

54
2) BOLTS BONS W/HEX HEAD SAE GRADE 5 FINE & CORSE THREAD BOLTS AND NUTS

55
JIG 2630ES ELECTRIC SCISSOR LIFT, HARD RUBBER TIRES, 25' LIFT,151 HRS, SN#0200214527

56
JLG 2630ES ELECTRIC SCISSOR LIFT, HARD RUBBER TIRES, 25' LIFT 143 HRS, SN#0200209447

57
JLG 450AJ SERIES 2 SKY POWER LIFT, 12/16.5 TIRES, 4X4, 500 LB CAPACITY, MAX HEIGHT 45', MAX REACH 25',1281 HRS, SN#0300164186

58
2015 KUBOTA TRACK SKID STEER SVL-90-2 – HIGH FLOW HYD, NEW 18” BELTS, JOYSTICK CONTROL, 3010 LIFT CAPACITY, 2 SPD, ENCLOSED ROPS W HEAT & AC, HYD Q/A, ONLY 951 HRS, SN#11184
2015 KUBOTA TRACK SKID STEER SVL-90-2 – HIGH FLOW HYD, NEW 18” BELTS, JOYSTICK CONTROL, 3010 LIFT CAPACITY, 2 SPD, ENCLOSED ROPS W HEAT & AC, HYD Q/A, ONLY 951 HRS, SN#11184

58
48" SKID STEER QUICK ATTACH FORKS

58
80" SKID STEER QUICK ATTACH BUCKET WITH CUTTING EDGE
80" SKID STEER QUICK ATTACH BUCKET WITH CUTTING EDGE 

59
2012 MANITOU MT5519 TELEHANDLER, JOYSTICK CONTROL, 2 SPEED, OSCILLATING HEAD, 4WD & CRAB CONTROL, HYD Q/A, ENCLOSED ROPS W/ HEAT & A/C, GEHL 48” 6000# FORKS, 12-16.5 INDUSTRIAL TIRES , ONLY 1156 HRS, SN#YD0725111
2012 MANITOU MT5519 TELEHANDLER, JOYSTICK CONTROL, 2 SPEED, OSCILLATING HEAD, 4WD & CRAB CONTROL,  HYD Q/A, ENCLOSED ROPS W/ HEAT & A/C, GEHL 48” 6000# FORKS, 12-16.5 INDUSTRIAL ...

59
HAUGEN MWP 4x6’ MAN BASKET MESH BOTTOM, FORK TUBES, SIDE DOORS SN#MOO10140
HAUGEN MWP 4x6’ MAN BASKET MESH BOTTOM, FORK TUBES, SIDE DOORS SN#MOO10140

59
HAUGEN FORK ATTACH JIB CRANE, MODEL MIJ, SN#M006592, 143" MAX EXTENSION

60
2010 DODGE RAM 1500 ,4X4, 4 DOOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, RECEIVER HITCH , NERF BARS, 5.7L HEMI, AUTOMATIC, 275/60R20 TIRES, CLOTH INTERIOR, TONE AU COVER, 134001 MI, VIN#1D7RV1CT9AS197377
2010 DODGE RAM 1500 ,4X4, 4 DOOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, RECEIVER HITCH , NERF BARS, 5.7L HEMI, AUTOMATIC, 275/60R20 TIRES, CLOTH INTERIOR, TONE AU COVER, 134001...

61
2011 DODGE RAM 2500 HD LARAMIE, CUMMINS DIESEL, AUTOMATIC, 4 DOOR, LEATHER INTERIOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, 7' BRADFORD BUILT FLATBED, GOOSENECK BALL, 285/70R17 TIRES, 155472 MI, VIN#3D7UT2CL8BG590348
2011 DODGE RAM 2500 HD LARAMIE, CUMMINS DIESEL, AUTOMATIC, 4 DOOR, LEATHER INTERIOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, 7' BRADFORD BUILT FLATBED, GOOSENECK BALL, 285/70R17 ...

61
2014 DODGE 3500 LONGHORN 4X4 DUALLY, 4 DOOR, 6.7L CUMMINS DIESEL, AUTO TRANS, 5TH WHEEL PLATE, LEATHER INT, PWR W & L, DIGITAL DISPLAY W/ BLUETOOTH, HEAT & A/C SEATS, HEATED STEERING WHEEL, BACKUP CAMERA, 235/80R17 TIRES, 95935 MILES, VIN#3C63RRKL1EG16143
2014 DODGE 3500 LONGHORN 4X4 DUALLY, 4 DOOR, 6.7L CUMMINS DIESEL, AUTO TRANS, 5TH WHEEL PLATE, LEATHER INT, PWR W & L, DIGITAL DISPLAY W/ BLUETOOTH, HEAT & A/C SEATS, HEATED STEERING WHEEL,...

62
2014 RC TRAILERS 28' ENCLOSED V NOSE TRAILER,102"WIDE, 85" TALL, REAR RAMP DOOR, SIDE DOOR, ALUM WHEELS, 225/75R15 TIRES, 2 5/6" BALL, ELEC BRAKES, INTERIOR LIGHTS, SHELVS, CABNITS, VIN#56VBE282EM611810
2014 RC TRAILERS 28' ENCLOSED V NOSE TRAILER,102"WIDE, 85" TALL, REAR RAMP DOOR, SIDE DOOR, ALUM WHEELS, 225/75R15 TIRES, 2 5/6" BALL, ELEC BRAKES, INTERIOR LIGHTS, SHELVS, CABNITS, VIN#56VBE282EM6...

63
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, RER RAMP DOOR, SIDE DOOR, STEEL WHEELS, ST225/75R15 TIRES, ELEC BRAKES, 2 5/16" BALLROOF VENT, INTERIOR SHELFS AND BENCH, ELECTRIC HEATER, VIN#56VBE2821DM602414
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, RER RAMP DOOR, SIDE DOOR, STEEL WHEELS, ST225/75R15 TIRES, ELEC BRAKES, 2 5/16" BALLROOF VENT, INTERIOR SHELFS AND BENCH, ELECTRIC HEATE...

64
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIR LIGHTS, INTERIOR SHELVES AND BENCH, VIN#56VBE2823DM602852
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIR LIGHTS, INTERIOR SHELVES AND BENCH, VIN#...

65
2012 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIOR LIGHTS, INTERIOR SHELVES AND BENCH, ELECTRIC BRAKES, VIN#5LABE2828DM117082
2012 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIOR LIGHTS, INTERIOR SHELVES AND BENCH, ELE...

66
PJ 24' DECK OVER TRAILER, 96" WIDE, RAMPS, ELECTRIC BRAKES 245/75R16 TIRES, STEEL WHEELS, TANDEM SINGLES
PJ 24' DECK OVER TRAILER, 96" WIDE, RAMPS, ELECTRIC BRAKES 245/75R16 TIRES,  STEEL WHEELS, TANDEM SINGLES

67
BIG TEX 14LX DUMP TRAILER, 14' LONG, 2' SIDES, REAR SWING DOORS, ELEC OVER HYD HOIST, TOUNG TOOL BOX, 235/80R16 TIRES ON 8 BOLT WHEELS, MESH TARP, SN#16VDX1620F5020020
TEX 14LX DUMP TRAILER, 14' LONG, 2' SIDES, REAR SWING DOORS, ELEC OVER HYD HOIST, TOUNG TOOL BOX, 235/80R16 TIRES ON 8 BOLT WHEELS, MESH TARP, SN#16VDX1620F5020020

68
SHOP BUILT UTLITY TRAILER, 12' LONG 77" WIDE, WOOD DECK, SIDES, FOLD DOWN REAR RAMP,205/75R15 TIRES 5 BOLT WHEELS, SPARE TIRE, LED LIGHTS, TOUNG MOUNT TOOL BOX

68
SHOP BUILT UTLITY TRAILER, 12' LONG 77" WIDE, WOOD DECK, SIDES, FOLD DOWN REAR RAMP,205/75R15 TIRES 5 BOLT WHEELS, SPARE TIRE, LED LIGHTS, TOUNG MOUNT TOOL BOX
SHOP BUILT UTLITY TRAILER, 12' LONG 77" WIDE, WOOD DECK, SIDES, FOLD DOWN REAR RAMP,205/75R15 TIRES 5 BOLT WHEELS, SPARE TIRE, LED LIGHTS, TOUNG MOUNT TOOL BOX (IDENTICAL TRAILER AS 68, ORIGINAL PH...

69
CRAFTSMAN 9 DRAWER ROLLING TOOLBOX, 27" WIDE, 18" DEEP, 40" TALL

69
ASHLEY 1660E WOOD STOVE, 3 YEARS OLD, ELECTRIC BLOWER, W/ ASSORTED STOVE PIPE

70
ASSORTED HAND TOOLS

71
CHICAGO ELECTRIC WELDER CART W/CONTENTS, HOSE, REGULATOR, GROUND CABLE (TANK NOT INCLUDED)
CHICAGO ELECTRIC WELDER CART W/CONTENTS, HOSE, REGULATOR, GROUND CABLE (TANK  NOT INCLUDED)

72
STEEL BANDING CART AND TOOLS,

73
STIHL GAS POWERED CONCRETE SAW W/ 2 BLADES

74
DEWALT CHOP SAW ON STAND

75
DELTA GRINDER ON STAND

76
PALLET OF GRINDER WHEELS, TAPE, WIRE WHEELS FILTER WRENCHES, MAP/PROPANE TORCHES

77
PALLET OF GRINDER WHEELS, FLAP WHEELS, ALLEN WRENCHES, DRILL BITS & MISC.

78
KT METRIC WRENCH SET, PIPE WRENCH, POP RIVET TOOL, METRIC ½” SOCKETS, VISE GRIPS, HOLE SAW, MASONRY BITS, SCREW DRIVERS

79
3/8” METRIC SOCKET SET, TAP AND DIE SET, SNAP RING PLIERS, MISC. SOCKETS, BOSH LASER, ¾” SOCKET SET, SAE ½” IMPACT SOCKET SET,

80
4) TOOLBOXES 3) SMITH TORCH SETS W/ REGULATORS, HOSE, CUTTING HEADS

80
RIDGID 700-T2 ELECTRIC PIPE THREADER, NO DIES
80a. RIDGID 700-T2 ELECTRIC PIPE THREADER, NO DIES

81
ASSORTED HARDWARE

82
CONDUIT BENDER, 2) STRIKING WRENCHES, TOOL BAGS, SOAP STONES, ASSORTED PULLERS, ROPE, TORCH HEAD

83
QTY OF HAMMERS, SAWS, 2) TOOL SETS

84
ASSORTED SAE WRENCHES, DRILL BITS, MASONRY BITS, SCREW DRIVERS

85
CHECK-A-THREAD, RYOBI BENCH GRINDER, IRWIN VISE, TAP AND DIE SET, CENTRAL FORGE PIPE THREADER W/DIES

85
WILLIAMS ¾ SOCKET SET W/ RATCHET, EXTENSION, BREAKER BAR

86
ASSORTED ELECTRICAL CONNECTORS, HEAT SHRINK, WIRE BRUSHES, LEVELS, GLOVES, TIN SNIPS, CASTER WHEELS, PUNCHES AND CHISELS

87
DEWALT CORDED BAND SAW, 2) DEWALT 7” ANGLE GRINDERS, 2) DEWALT 4” ANGLE GRINDERS

88
DEWALT 18V CORDLESS TOOLS, 2) GRINDERS, 4) DRILLS, 2) BATTERIES, 2 CHARGERS, CARRYING BAG

89
MILWAUKEE CORDED TOOLS, CIRCULAR SAW, DRILL, 2) 4” ANGLE GRINDERS

90
MILWAUKEE CORDED TOOLS, 7” ANGLE GRINDER, 4” ANGLE GRINDER, 2) DIE GRINDERS

91
MILWAUKEE CORDED GRINDERS, 3) 4” GRINDERS, 1) 7” GRINDER

92
MILWAUKEE CORDED TOOLS, 2) DRILLS, 1) DIE GRINDER

93
MILWAUKEE CORDLESS TOOLS, SAWZALL, LIGHT, CIRCULAR SAW, DRILL, IMPACT DRIVER, GRINDER, 7) BATTERIES, 2) CHARGERS, 2) CARRYING BAGS

94
MILWAUKEE CORDLESS TOOLS, SAWZALL, LIGHT, CIRCULAR SAW, DRILL, IMPACT DRIVER, GRINDER, 7 BATTERIES, 2) CHARGERS, 2) CARRYING BAGS

95
MAKITA 4” GRINDER, BOSH HAMMER DRILL, MACHE V ELECTRIC HAMMER

96
2) BOSCH HAMMER DRILLS, DRILL, 2) 4” GRINDERS
2) BOSCH HAMMER DRILLS, DRILL, 2) 4” GRINDERS

97
DREMEL TOOL, METABO SCREW GUN, BLACK AND DECKER ROTARY TOOL, CRAFTSMAN 19.2 V DRILL AND BATTERY, LINCOLN ELECTRIC GREASE GUN

98
MILWAUKEE MAGNETIC DRILL PRESS W/ ASSORTED ANNULAR CUTTERS

99
MILWAUKEE MAGNETIC DRILL PRESS W/ ASSORTED ANNULAR CUTTERS AND CHUCK

100
MILWAUKEE MAGNETIC DRILL PRESS W/ ASSORTED ANNULAR CUTTERS

101
MILWAUKEE M12 CORDLESS INSPECTION CAMERA W/ CHARGER AND BATTERY

102
MILWAUKEE 90 DEGREE CORDED ANGLE DRILL

103
MILWAUKEE M18 FUEL ½” IMPACT W/ BATTERY AND CHARGER

104
BOSCH HAMMER DRILL W/ BITS

105
BOSCH HAMMER DRILL

106
BOSCH HAMMER DRILL W/ BITS

107
BOSCH HAMMER DRILL

108
WEN HEAT GUN

109
MASTER HAND JIG SAW

110
BLACK & DECKER 12V DRILL, LIGHT, 2) BATTERIES AND 1) CHARGER
BLACK & DECKER 12V DRILL, LIGHT, 2) BATTERIES AND 1) CHARGER

110
ALLIGATOR RSC187 BELT SPLICING TOOL

111
WELLER SOLDERING GUN

111
EASY TAPPER HOT PIPE TAP

112
CHICAGO PNEUMATIC 1” IMPACT GUN

113
RIDGID RATCHETING PIPE THREADER W/ DIES,

114
RIDGID RATCHETING PIPE THREADER W/DIES

115
DEWALT RECIPROCATING SAW

116
MILWAUKEE HOLE SAW SET

117
MILWAUKEE CORDED DRILL

118
MILWAUKEE M18 FUEL CORDLESS BAND SAW W/ CHARGER AND BATTERY

119
MILWAUKEE M18 FUEL CORDLESS BAND SAW W/CHARGER AND BATTERY

120
MILWAUKEE CORDED BAND SAW

121
MILWAUKEE CORDED BAND SAW

122
STEEL WORK BENCH ON CASTER WHEELS, 24' LONG,33" WIDE, 40" TALL
STEEL WORK BENCH ON CASTER WHEELS

123
ASSORTED RATCHET STRAPS

124
TARPS, CABLE, ROPE, FLASHLIGHTS, PAILS,

125
ASSORTED SOCKETS, CREW DRIVERS, COMBINATION WRENCHES, TEKTON ANGLE WRENCH SET, 1 5/16” – 1 ½”

126
BIN LIFTER, HOSE, FLANGES, MISC.

127
AIR TOOLS, WEATHERSTRIPPING, GRINDER WHEELS MASONRY BITS, PULLEYS,

128
TOOLBOX WITH CONTENTS 2) BOXES MISC HAND TOOLS, 2) PAILS
TOOLBOX WITH CONTENTS, 2) BOXES MISC HAND TOOLS, 2) PAILS

129
FACE SHIELDS, VESTS, HARDHATS, FACE MASKS

130
3) POSI LOCK PULLERS, STEEL SHAFT, CLAMPS. FLAG, RTV SEALANT

131
MICROWAVE, OVERHEAD PROJECTOR, CLEANING PRODUCTS, ELECTRONIC SCALE, STEEL STOOL,

132
2) LEVER CHAIN HOISTS, 5) CHAIN HOISTS, 2) BEAM CLAMPS

133
MISC. HARDWARE

134
PALLET RACKING 37' WIDE, 4' DEEP, 16' TALL

135
LAWSON BOLT BIN W/ ASSORTED GRADE 8 SAE CORSE THREAD BOLTS

136
4) SHELVING UNITS,

137
3) WIRE SHELVES

138
2 WHEEL DOLLY

139
18) LIGHTS

140
ASSORTED SAFETY HARNESSES

141
ASSORTED 220V POWER CORDS,

142
TEKTON AIR HOSE REEL, MANUAL HOSE REEL, ASSORTED AIR HOSE AND FITTINGS

143
TORCH CART

143
TORCH CART

144
TORCH CART

145
TORCH CART W/HOSES/ SMITH REGULATORS AND CUTTING HEAD

146
TORCH CART

147
TORCH CART W/ HOSES / SMITH REGULATORS AND CUTTING HEAD, TORCH CART (TANKS NOT INCLUDED)

148
TORCH CART

149
TOTE OF ASSORTED ELECTRICAL BOXES, CONDUIT PARTS, WIRE,

150
2) CRATES OF PAINT SUPPLIES, ROLLERS, ROLLER TRAYS

151
ASSORTED PAINT

152
2) RIDGID PIPE VISE STANDS, ASSORTED FOLD-A-JACK STANDS

153
2) RIDGID PIPE VISE STANDS, ASSORTED FOLD-A-JACK STANDS

154
2) RIDGID PIPE VISE STANDS, ASSORTED FOLD-A-JACK STANDS

155
STEEL CABINET AND ORGANIZERS

156
4 WHEEL BAGGAGE CART W/ CONTENTS

157
QUINCY 2 STAGE 5 HP 60-GAL AIR COMPRESSOR, 230V 1 PHASE

157
4 WHEEL BAGGAGE CART (MOWER NOT INCLUDED)

158
2) ST205/75R15 TRAILER TIRES ON 6 BOLT WHEELS

159
PORTABLE AIR TANK,

160
FUEL TRANSFER TANK W/ GPI 12V PUMP, HOSE, AUTO SHUT OFF NOZZLE,

161
ASSORTED STEEL

162
HOMELITE WEED EATER(NEEDS REPAIR), 48” FORK
HOMELITE WEED EATER (NEEDS REPAIR), 48” FORK

163
TRAILER MOVER TO FIT FORKS

164
PERFORMAX BALL BEARING TOOL CHEST, 2 DRAWER FILE CABINET, BUYERS UNDER BODY BOX,

165
3) OVERHEAD TROLLEYS, 13 BEAM CLAMPS

166
5) WATER FIRE EXTINGUISHERS, SMALL FIRE EXTINGUISHERS, LEVELS, SQUARES, FAN

167
ASSORTED STEEL

168
3) SHOP CREEPERS

169
RACK WITH CONTENTS

170
STEEL CART ON CASTERS W/CONTENTS

171
4 WHEEL CART

172
PIPE CART

173
PIPE CART

174
PIPE CART

175
GRASSHOPPER PIPE DOLLY

176
PIPE CART

176
PIPE CART

177
SAFETY CONES

178
CARDBOARD BOXES

179
CAULKING, GLUE GUN, GLUE STICKS, WELDING CURTIN, ROPE

180
2) JUSTRITE 5 GAL FUEL CANS,MISC. GRINDER WHEELS, PAINT SUPPLIES, HARDWARE, IMPACT SOCKETS, GREASE GUN
2) JUSTRITE 5 GAL FUEL CANS, MISC. GRINDER WHEELS, PAINT SUPPLIES, HARDWARE, IMPACT SOCKETS, GREASE GUN

181
OVERHEAD TROLLY, 5) HYD BOTTLE JACKS, 2) FOLDABLE SAWHORSES, ASSORTED CHAIN HOIST, BEAM CLAMPS

182
PAINTING SUPPLIES

183
WEED BURNER, TORCH HOSES,

184
EXTENSION CORDS

185
WELDING LEADS

186
TAC BOARD, WHITE BOARD, FOLDING CHAIRS

187
2) JUSTRITE 5 GAL FUEL CANS,OIL, FILTERS DUST PANS

188
PLASTIC TARPS, RAMPS, WHEEL CHOCKS

189
MOP BUCKET, SPRAYER, TRIPOD, WATER COOLER

190
HARNESSES

191
2) JUSTRITE 5 GAL FUEL CANS,MISC. SHOP SUPPLIES, PAINT, CLEANERS, CAULKING,

192
2) JUSTRITE 5 GAL FUEL CANS,OIL, GAS CANS, PAIL PUMPS, GREASE GUNS

193
CONDUIT, STEEL

194
PEG BOARD ORGANIZERS, BELTING, HOSE,

195
2) JUSTRITE 5 GAL FUEL CANS,GAS CANS, DRIP PANS

196
2) JUSTRITE 5 GAL FUEL CANS,CAULKING, SHOP SUPPLIES,

197
2) JUSTRITE 5 GAL FUEL CANS, PLASTICGAS CANS
2) JUSTRITE 5 GAL FUEL CANS, PLASTIC GAS CANS

198
BROOMS, MOPS, SHOVEL

199
SHOVELS, BROOMS

200
MY-TE AC36B 3000 LB 110V ELECTRIC WINCH

201
PALLET JACK

202
PALLET JACK

203
PALLET JACK

204
PALLET JACK

204
PALLET JACK

205
PALLET JACK

205
PALLET JACK

206
2 WHEEL DOLLY

207
2 WHEEL DOLLY

208
2 WHEEL DOLLY

209
2 WHEEL DOLLY

210
PAINT, OIL, 2) SMALL TIRES

211
2) STEEL FOLDABLE SAWHORSES, SAFETY HARNESSES

211
JET 2 TON CHAIN HOIST

212
5) CHAIN HOISTS

212
JET 1.5 TON CHAIN HOIST

212
JET 2 TON CHAIN HOIST

212
MAGNA 1.5 TON LEVER CHAIN HOIST

213
3) CHAIN HOISTS, 4 ) SMALLER LEVER CHAIN HOISTS, CLEVISIS, LIFTING CHAIN, MISC

213
JET 1.5 TON CHAIN HOIST

213
NEW IN BOX JET 1.5 TON CHAIN HOIST

213
MAGNA 2 TON CHAIN HOIST

214
SHOP MAGNET

215
TORIN PORTA POWER

216
WELDING WIRE

217
PAD TAMPER W/ HONDA 4.0 ENGINE

218
JACKSON WHEELBARROW

219
FOLDING CHAIR CART, TARP, STANDS

220
SHOP VAC, ELEC MOTOR, SHOP SUPPLIES

221
ASSORTED PNEUMATIC PARTS, RATCHET STRAPS

222
DUST BLOWER

223
DOOR DOLLY

224
METAL STANDS

225
BLACK WIDOW SHOP CART 2 DRAWER

225
WILLIAMS TOOL SET, SAE & METRIC 1/2" DRIVE SOCKET SETS, SAE & METRIC 3/8" SOCKET SETS, 2)LOCKING PLIERS, 2)HAMMERS, 2) PRY BARS, ASSORTED NUTDRIVERS AND SREW DRIVERS, SAE & METRIC WRENCHES
WILLIAMS TOOL SET, SAE & METRIC 1/2" DRIVE SOCKET SETS, SAE & METRIC 3/8" SOCKET SETS, 2)LOCKING PLIERS, 2)HAMMERS, 2) PRY BARS, ASSORTED NUTDRIVERS AND SREW DRIVERS, SAE & METRIC WRENCHES

226
PARTIAL BARREL OF 15W40 OIL W/PUMP

227
TOOL SHOP PARTS WASHER

228
SHELVING UNIT, 8' WIDE, 2' DEEP, 7' TALL
SHELVING UNIT 8' WIDE, 2' DEEP, 7' TALL

229
ASSORTED THREADED ROD AND ORGANIZERS

230
MISC. HARDWARE, CABLE, BRACKETS

231
CHOP SAW, PLASTIC

232
TAR PAPER, STRETCH WRAP, TOOL BOX, TIE DOWN STRAPS

233
2) RIDGID PIPE VISE STANDS

234
PRONTO ELECTRIC WHEEL CHAIR, CONDITION U/K

235
PIPE FLANGES

236
MOTORS, VALVES

237
LARGE STEEL FITTINGS

237
ASSORTED PLASTIC

238
ASSORTED PIPE FLANGES

239
FITTINGS, TOOL BUCKETS, CHAIN BINDERS, DAYTON DIAPHRAGM PUMP

240
FIRE EXTINGUISHERS, WHITE BOARD, WATER COOLERS

241
GARDEN HOSES, ROPE

242
ASSORTED HARNESSES, SINK, BLUEPRINT TUBES,

243
3) ROLLER STANDS

244
CRANE PADS

245
FLANGE GASKETS, FOAM, GASKET PAPER

246
PIPE FLANGES, PIPE HANGERS

247
VALVES, FITTINGS

248
2)PIPE DEFROSTERS

249
WIRE, ELECTRICAL CONNECTIONS

250
ELECTRICAL CORDS, HARNESS

251
CABLE PULLERS, BOAT GAS TANKS, CHAIN HOIST, MISC.

252
6)WELDING LEADS

252
5)WELDING LEADS

253
BELTING, FANS

254
PIPE FLANGES

255
2)HANDY MAN JACKS, SMITH TORCH SET, TORCH PARTS, HYD JACK, JACK STAND PARTS, LEVER HOIST, CHAIN HOIST

256
CABINETS, PLASTIC, VENT HOSE, FIRE EXTINGUISHER

257
ROPE

258
EXTENSION CORDS

259
HARNESSES, OXY/ACETYLENE HOSE, AIR HOSE,

260
7) SUMNER PRO-ROLL PIPE STANDS

261
BILJAX SCAFFOLDING, 22) UPRIGHTS, 5) PLANKS, ASSORTED CROSSMEMBERS AND WHEELS

262
WERNER 24' EXTENSION LADDER

263
WERNER 24' EXTENSION LADDER

265
WERNER 6' STEP LADDER, WERNER 10' STEP LADDER

266
2)SMALL STEP LADDERS, HUSKY 6' STEP LADDER, WERNER 6' STEP LADDER

267
WERNER 8' STEP LADDER (NEEDS REPAIR), WERNER 10' STEP LADDER

268
WERNER 6' STEP LADDER, WERNER 24' EXTENSION LADDER

269
WERNER 6' STEP LADDER, WERNER 12' STEP LADDER

270
WERNER 6' STEP LADDER, KELLER 8' STEP LADDER

271
WERNER 8' STEP LADDER, WERNER 10' STEP LADDER

272
WERNER 24' EXTENSION LADDER

273
RIGID PIPE VISE STAND, 11) SUMMNER PIPE STANDS

273
RIGID PIPE VISE STAND, 11) SUMMNER PIPE STANDS

274
ASSORTED 4X8 SHEETS OF PLYWOOD AND OSB, TARP, PVC PIPE, INSULATION BOARD

275
KNAACK 2472 JOB MASTER CHEST

276
KNAACK 2472 JOB MASTER CHEST

277
ASSORTED FUSES, DRIVELINE COMPONENTS, COPPER TUBE, DUCT TUBE

278
POWER TROWEL, HONDA ENGINE

279
PORTABLE ELECTRIC CEMENT MIXER

280
CONCRETE FLOATS AND HANDLES

281
BAGS OF SAKRETE AND QUICKRITE, HAND TROWELS, REPAIR STANDS, CONCRETE EDGER, DRUM W/ REBAR STANDS & MISC.
BAGS OF SAKRETE AND QUICKRITE, HAND TROWELS, REPAIR STANDS, CONCRETE EDGER, DRUM W/ REBAR STANDS & MISC.

282
TARPS, ELECTRIC HAMMERS, ROLLER STAND, ROADSIDE EMERGENCY KIT, BELTING, STAKES,MISC

283
TANK CAGE (CONTENTS NOT INCLUDED)
TANK CAGE (CONTENTS NOT INCLUDED)

284
YARDMAN HYDRO LAWN TRACTOR W/DECK, KOHLER 15 HP

285
20' SHIPPING CONTAINER

285
40' SHIPPING CONTAINER

286
2000 GAL FUEL TANK W/ GAS BOY PUMP

287
BETTERBUILT 100 TRANSFER TANK W/HAND PUMP

288
ASSORTED PIPE

289
SCRAP IRON

290
SCRAP IRON

291
WOOD STEEL RACK W/CONTENTS
WOOD STEEL RACK W/CONTENTS

292
WOOD STEEL RACK W/CONTENTS
WOOD STEEL RACK W/CONTENTS

293
POLY TANK

294
ASSORTED HARDWARE, ROLLER STAND

295
ASSORTED CHAIN, HARDWARE, STAKES

296
CONCRETE VIBRATOR

297
CONCRETE VIBRATOR

298
20' 2"X5" MAGNESIUM SCREED

299
8 FIRE EXTINGUISHERS

300
ASSORTED YARD TOOLS, SHOVELS, BROOMS, RAKES

301
SUMP PUMP, HOSE, DISCHARGE HOSE

302
RUBBER BOOTS

303
REBAR BENDER

304
SKID STEER ATTACHMENT ADAPTER

305
12) TRASH CANS

306
FUEL CAN, TARP, BUCKETS

307
4) PATIO CHAIRS

308
4) FOLDING CHAIRS

309
2) OFFICE CHAIRS

310
4) DINING TABLE CHAIRS

311
WOOD SHOP TABLE

312
4) HAND SPRAYERS, LAWN EDGING

313
2)MINI FRIDGES

314
CANON IMAGEPROGRAF IPF785 – SN#BAAS3365
CANON IMAGEPROGRAF IPF785 – SN#BAAS3365

315
DRAFTING TABLE, W/ SHELF, 32”x111”, ***BUYER IS RESPONSIBLE FOR REMOVAL***
DRAFTING TABLE, W/ SHELF, 32”x111”, ***BUYER IS RESPONSIBLE FOR REMOVAL***

316
L SHAPE OFFICE DESK W/ HUTCH, 71”x83”

317
L SHAPE OFFICE DESK W/HUTCH, 71”x83”

318
RECEPTIONIST DESK, 71”X77”
RECEPTIONIST DESK, 71”x77”

319
4) PADDED CHAIRS

320
3)OFFICE CHAIRS

321
5)SMALL FILE CABINETS

322
TWO PADDED CHAIRS

323
WOOD CART AND STOOL

324
JACKSON WHEELBARROW W/ RAIN COATS

325
PLASTIC, SUBWOOFER, WATER HEATER

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Mechanical Contractor Online Auction
 Online Only Auction
Auction Date(s)
Bidding Starts: Thursday Jun 25 , 10:00 AM
Bidding Ends: Tuesday Jun 30 , 09:00 AM
Auction Location
Company
Listing Terms and Conditions

READ ALL OF THE FOLLOWING AUCTION TERMS & CONDITIONS CAREFULLY

NOTE: THERE WILL BE A 10% INTERNET BUYERS PREMIUM CAPPED AT $1,000 PER UNIT ON THIS AUCTION.

NOTE: BY ACCEPTING THESE TERMS AND CONDITIONS, YOU AGREE THAT IF YOU ARE THE WINNING BIDDER ON A LOT, YOU ENTER A LEGALLY BINDING CONTRACT TO PURCHASE THAT LOT UNDER THE UNIFORM COMMERCIAL CODE.  FURTHERMORE,  IF YOU DON'T PAY FOR THE LOT, YOU WILL BE SUBJECT TO LEGAL ACTION. 

*SUCCESSFUL INTERNET BIDDERS WILL BE NOTIFIED "BY EMAIL" WITHIN A REASONABLE AMOUNT OF TIME FOLLOWING THE AUCTION

*WHILE PHOTOS ARE PROVIDED AS A COURTESY, WE RECOMMEND A PERSONAL INSPECTION. ALL ITEMS ARE SOLD AS IS WHERE IS.

• You must register with Resource Auction & Next Lot, Inc. to bid and agree to comply with all required requests

• All purchases are in US Funds. Payable in cash, cashier’s check, wire transfer, approved domestic check w/bank letter of credit, you furthermore agree not to stop payment on same check and to pay any associated legal costs including attorney fees, interests, costs and related expenses involved with any collection on your part. Partial payment on partial pull-out is not allowed.

• International purchases must be paid by wire transfer. A wire fee will be added to the same. Some Canadian purchases may be paid by official bank draft or cashier's check.

• Customers obtaining financing must do so in advance and provide that information in advance.

• You are responsible for all purchases made with your bidding number - Regardless As To Who Uses It.

• Resource Auction reserves the right to hold all units in our or our sellers’ possession for payment until funds clear our account.

• Sellers and auctioneers are not responsible for errors or omissions in auction listings.

*Resource Auction does not warrant the condition of the equipment or units sold, nor the accuracy of meter readings or descriptions and to the extent that there is any claim asserted the damages are limited to the purchase price of the affected unit. Where possible, serial numbers and vehicle identification numbers are available to complete your inspection.

• Printed material both auction day and in previous advertising is provided as a guide only and may contain certain inaccuracies. You must make your own inspection of each unit and base your bidding and/or purchases accordingly. Resource Auction makes no representations or warranties, express or implied, regarding equipment, without limitation, its performance, merchantability or fitness for a  particular purpose.

*You are responsible for each item you purchase, regardless to published information regarding year of manufacture, model, machine or engine hours, physical condition, options and features and All Units Are Sold As Is/Where Is.

*Statements made auction day take precedence over all advertising

• Auctioneers, their employes and sellers are not responsible for lost or stolen articles. Once you purchase an item from the auction block, it becomes your responsibility - Paid For Or Not.

• Please be advised that there is heavy equipment and vehicles moving about. This is a High Activity Area. Sellers, owners and auctioneers are not responsible for accidents or injury to person or property on premises, or on or near equipment and vehicles.

• Please do not remove shields or covers from equipment without putting them back in place.

• Sale order is at our discretion and may differ from previously viewed material.

*SALES TAX MAY APPLY ON CERTAIN UNITS IN CERTAIN CIRCUMSTANCES.

*THERE WILL BE A $30 DOCUMENT FEE ON ALL TITLED VEHICLES

*FOR AUCTIONS INVOLVING FIREARMS ALL BUYERS MUST COMPLETE ATF FORM 4473 WITH THE FFL ON HAND.  FIREARMS BUYERS MUST COMPLY WITH ALL STATE, & FEDERAL REGULATIONS AS REQIRED BY THE FFL & ATF.

LOAD OUT INFORMATION: YOU MUST HAVE PAID RECEIPTS FOR LOADING

For Consignment and Dealer Auctions:

• Loading is from 8 a.m. to 4 p.m. Monday thru Friday, Saturdays only if indicated

• No loading after dark • Closed all Sundays and Holidays

• Unless otherwise indicated, all items must be removed in 7 days, if not fees may incur

For Auctions at Sellers’ Locations:

• Load out times, dates and availability must be arranged in advance with seller and will be per sale day announcements

• All items must be removed in 15 days, unless other arrangements have been made

IMPORTANT: Units left after the stated removal date will be moved to a storage lot and will be assessed a $50/day per item fee for storage.



1
ALADDIN 14-430 220V HOT PRESSURE WASHER, 4 WHEEL CART, SOAP CONTROL, HOSE REEL

2
HYD FLOOR JACK

3
HYD FLOOR JACK W/CROSS BEAM

4
HYD FLOOR JACK W/CROSS BEAM

5
2) TRIPOD LIGHTS

6
3) TRIPOD LIGHTS

7
2007 EASTEY HEAT TUNNEL SHRINK WRAP MACHINE – SINGLE PHASE, 220 VOLT, DIGITAL TEMPERATURE CONTROL, MODEL ET1610-48, SN 54748TLMB
2007 EASTEY HEAT TUNNEL SHRINK WRAP MACHINE – SINGLE PHASE, 220 VOLT, DIGITAL TEMPERATURE CONTROL, MODEL ET1610-48, SN 54748TLMB

8
2)FANS ON STANDS

9
MENARDS KDS-25-4559 MILL DRILL 110V W/TABLE

10
JET 10” JWTS-10 TABLE SAW

11
ROLAIR 1.5HP 9-GAL PORTABLE AIR COMPRESSOR, 110V ELEC MOTOR

12
ROLAIR 1.5HP 9-GAL PORTABLE AIR COMPRESSOR, 110V ELEC MOTOR

13
QTY OF WELDING LEADS

14
8)MACHINE DOLLIES, 2) OVERHEAD TROLLEYS

15
WELDING RODS, REGULATORS

16
WELDING RODS

17
GAS LINES FOR WELDERS

17
5)WELDING LEADS

18
10)WELDING LEADS

18
5)WELDING LEADS

19
16-GAL SHOP VAC

20
MILLERMATC 200 WELDER

21
MILLER DYNASTY 200 WELDER

22
MILLERMATIC 200 WELDER

23
HYPERTHERM POWERAX 85 PLASMA CUTTER

24
HYPERTHERM POWERMAX 85 PLASMA CUTTER

25
HYPERTHERM POWERMAX 85 PLASMA CUTTER

26
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

27
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

28
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

28
RED-D-ARC EXTREME 360 CC/CV INVERTER WELDER

29
MILLER XMP 304 WELDER

30
MILLER EXTREAM 360 WELDER

31
MILLER EXTREAM 360 WELDER

32
MILLER MAXSTAR 150 STL

33
MILLER MAXSTAR 150 STL

34
MILLER MAXSTAR 150 STL

35
MILLER MAXSTAR 150 STL

36
MILLER MAXSTAR 150 STL

37
MILLER MAXSTAR 150 STL

38
MILLER SUITCASE XTREAM 12DS

39
MILLER SUITCASE XTREAM 12DS

40
MILLER SUITCASE XTREAM 12DS

40
MILLER SUITCASE XTREAM 12DS
40A. MILLER SUITCASE XTREAM 12DS

41
LINCOLN AC 225 ARC WELDER 220V

42
ESAB MIGMASTER 250 220V WIRE WELDER

43
MILLER TRAILBLAZER 325 DC WELDER, 12,000 W GENERATOR W/ 4 WHEEL CART

44
HEAT STAR 175,00 BTU OIL HEATER

45
JET JDP-17MF DRILL PRESS, 110V, VISE
JET JDP-17MF DRILL PRESS, 110V, VISE

46
MILWAUKEE DIAMOND CORE DRILL W/ LARGE BASE STAND – 2” TO 10”, 1 ¼ – 7 SPINDLE THREAD, SN#798C314260018
MILWAUKEE DIAMOND CORE DRILL W/ LARGE BASE STAND – 2” TO 10”, 1 ¼ – 7 SPINDLE THREAD, SN#798C314260018

47
HARDWARE CABINET, SHEET METAL SCREWS, SET SCREWS, GREASE ZIKRS

48
2) HARDWARE CABINETS, COTTER KEYS, ROLL PINS, MACHINE SCREWS

49
BOLT BIN W/ MISC. HARDWARE

50
2)BOLT BINS W/ ALLEN HEAD SAE BOLTS, SAE NUTS, LOCK WASHERS

51
2) BOLT BINS W/ ALLEN HEAD SAE BOLTS

52
2) BOLT BINS W/ HEX HEAD SAE GRADE 5 BOLTS

53
2) BOLT BINS W/ HEX HEAD SAE GRADE 5 FINE THREAD BOLTS, LOCK WASHERS, NUTS, SEAT TAPER HEAD BOLTS

54
2) BOLTS BONS W/HEX HEAD SAE GRADE 5 FINE & CORSE THREAD BOLTS AND NUTS

55
JIG 2630ES ELECTRIC SCISSOR LIFT, HARD RUBBER TIRES, 25' LIFT,151 HRS, SN#0200214527

56
JLG 2630ES ELECTRIC SCISSOR LIFT, HARD RUBBER TIRES, 25' LIFT 143 HRS, SN#0200209447

57
JLG 450AJ SERIES 2 SKY POWER LIFT, 12/16.5 TIRES, 4X4, 500 LB CAPACITY, MAX HEIGHT 45', MAX REACH 25',1281 HRS, SN#0300164186

58
2015 KUBOTA TRACK SKID STEER SVL-90-2 – HIGH FLOW HYD, NEW 18” BELTS, JOYSTICK CONTROL, 3010 LIFT CAPACITY, 2 SPD, ENCLOSED ROPS W HEAT & AC, HYD Q/A, ONLY 951 HRS, SN#11184
2015 KUBOTA TRACK SKID STEER SVL-90-2 – HIGH FLOW HYD, NEW 18” BELTS, JOYSTICK CONTROL, 3010 LIFT CAPACITY, 2 SPD, ENCLOSED ROPS W HEAT & AC, HYD Q/A, ONLY 951 HRS, SN#11184

58
48" SKID STEER QUICK ATTACH FORKS

58
80" SKID STEER QUICK ATTACH BUCKET WITH CUTTING EDGE
80" SKID STEER QUICK ATTACH BUCKET WITH CUTTING EDGE 

59
2012 MANITOU MT5519 TELEHANDLER, JOYSTICK CONTROL, 2 SPEED, OSCILLATING HEAD, 4WD & CRAB CONTROL, HYD Q/A, ENCLOSED ROPS W/ HEAT & A/C, GEHL 48” 6000# FORKS, 12-16.5 INDUSTRIAL TIRES , ONLY 1156 HRS, SN#YD0725111
2012 MANITOU MT5519 TELEHANDLER, JOYSTICK CONTROL, 2 SPEED, OSCILLATING HEAD, 4WD & CRAB CONTROL,  HYD Q/A, ENCLOSED ROPS W/ HEAT & A/C, GEHL 48” 6000# FORKS, 12-16.5 INDUSTRIAL ...

59
HAUGEN MWP 4x6’ MAN BASKET MESH BOTTOM, FORK TUBES, SIDE DOORS SN#MOO10140
HAUGEN MWP 4x6’ MAN BASKET MESH BOTTOM, FORK TUBES, SIDE DOORS SN#MOO10140

59
HAUGEN FORK ATTACH JIB CRANE, MODEL MIJ, SN#M006592, 143" MAX EXTENSION

60
2010 DODGE RAM 1500 ,4X4, 4 DOOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, RECEIVER HITCH , NERF BARS, 5.7L HEMI, AUTOMATIC, 275/60R20 TIRES, CLOTH INTERIOR, TONE AU COVER, 134001 MI, VIN#1D7RV1CT9AS197377
2010 DODGE RAM 1500 ,4X4, 4 DOOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, RECEIVER HITCH , NERF BARS, 5.7L HEMI, AUTOMATIC, 275/60R20 TIRES, CLOTH INTERIOR, TONE AU COVER, 134001...

61
2011 DODGE RAM 2500 HD LARAMIE, CUMMINS DIESEL, AUTOMATIC, 4 DOOR, LEATHER INTERIOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, 7' BRADFORD BUILT FLATBED, GOOSENECK BALL, 285/70R17 TIRES, 155472 MI, VIN#3D7UT2CL8BG590348
2011 DODGE RAM 2500 HD LARAMIE, CUMMINS DIESEL, AUTOMATIC, 4 DOOR, LEATHER INTERIOR, POWER LOCKS AND WINDOWS, CRUISE, TILT, AC, POWER INVERTER, 7' BRADFORD BUILT FLATBED, GOOSENECK BALL, 285/70R17 ...

61
2014 DODGE 3500 LONGHORN 4X4 DUALLY, 4 DOOR, 6.7L CUMMINS DIESEL, AUTO TRANS, 5TH WHEEL PLATE, LEATHER INT, PWR W & L, DIGITAL DISPLAY W/ BLUETOOTH, HEAT & A/C SEATS, HEATED STEERING WHEEL, BACKUP CAMERA, 235/80R17 TIRES, 95935 MILES, VIN#3C63RRKL1EG16143
2014 DODGE 3500 LONGHORN 4X4 DUALLY, 4 DOOR, 6.7L CUMMINS DIESEL, AUTO TRANS, 5TH WHEEL PLATE, LEATHER INT, PWR W & L, DIGITAL DISPLAY W/ BLUETOOTH, HEAT & A/C SEATS, HEATED STEERING WHEEL,...

62
2014 RC TRAILERS 28' ENCLOSED V NOSE TRAILER,102"WIDE, 85" TALL, REAR RAMP DOOR, SIDE DOOR, ALUM WHEELS, 225/75R15 TIRES, 2 5/6" BALL, ELEC BRAKES, INTERIOR LIGHTS, SHELVS, CABNITS, VIN#56VBE282EM611810
2014 RC TRAILERS 28' ENCLOSED V NOSE TRAILER,102"WIDE, 85" TALL, REAR RAMP DOOR, SIDE DOOR, ALUM WHEELS, 225/75R15 TIRES, 2 5/6" BALL, ELEC BRAKES, INTERIOR LIGHTS, SHELVS, CABNITS, VIN#56VBE282EM6...

63
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, RER RAMP DOOR, SIDE DOOR, STEEL WHEELS, ST225/75R15 TIRES, ELEC BRAKES, 2 5/16" BALLROOF VENT, INTERIOR SHELFS AND BENCH, ELECTRIC HEATER, VIN#56VBE2821DM602414
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, RER RAMP DOOR, SIDE DOOR, STEEL WHEELS, ST225/75R15 TIRES, ELEC BRAKES, 2 5/16" BALLROOF VENT, INTERIOR SHELFS AND BENCH, ELECTRIC HEATE...

64
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIR LIGHTS, INTERIOR SHELVES AND BENCH, VIN#56VBE2823DM602852
2013 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIR LIGHTS, INTERIOR SHELVES AND BENCH, VIN#...

65
2012 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIOR LIGHTS, INTERIOR SHELVES AND BENCH, ELECTRIC BRAKES, VIN#5LABE2828DM117082
2012 RC TRAILERS, 28' ENCLOSED TRAILER, 102" WIDE, 88" TALL, REAR RAMP DOOR, SIDE DOOR, STEEL WHEELS, 225/75R15 TIRES, ELECTRIC BRAKES, 2 5/16" BALL INTERIOR LIGHTS, INTERIOR SHELVES AND BENCH, ELE...

66
PJ 24' DECK OVER TRAILER, 96" WIDE, RAMPS, ELECTRIC BRAKES 245/75R16 TIRES, STEEL WHEELS, TANDEM SINGLES
PJ 24' DECK OVER TRAILER, 96" WIDE, RAMPS, ELECTRIC BRAKES 245/75R16 TIRES,  STEEL WHEELS, TANDEM SINGLES

67
BIG TEX 14LX DUMP TRAILER, 14' LONG, 2' SIDES, REAR SWING DOORS, ELEC OVER HYD HOIST, TOUNG TOOL BOX, 235/80R16 TIRES ON 8 BOLT WHEELS, MESH TARP, SN#16VDX1620F5020020
TEX 14LX DUMP TRAILER, 14' LONG, 2' SIDES, REAR SWING DOORS, ELEC OVER HYD HOIST, TOUNG TOOL BOX, 235/80R16 TIRES ON 8 BOLT WHEELS, MESH TARP, SN#16VDX1620F5020020

68
SHOP BUILT UTLITY TRAILER, 12' LONG 77" WIDE, WOOD DECK, SIDES, FOLD DOWN REAR RAMP,205/75R15 TIRES 5 BOLT WHEELS, SPARE TIRE, LED LIGHTS, TOUNG MOUNT TOOL BOX

68
SHOP BUILT UTLITY TRAILER, 12' LONG 77" WIDE, WOOD DECK, SIDES, FOLD DOWN REAR RAMP,205/75R15 TIRES 5 BOLT WHEELS, SPARE TIRE, LED LIGHTS, TOUNG MOUNT TOOL BOX
SHOP BUILT UTLITY TRAILER, 12' LONG 77" WIDE, WOOD DECK, SIDES, FOLD DOWN REAR RAMP,205/75R15 TIRES 5 BOLT WHEELS, SPARE TIRE, LED LIGHTS, TOUNG MOUNT TOOL BOX (IDENTICAL TRAILER AS 68, ORIGINAL PH...

69
CRAFTSMAN 9 DRAWER ROLLING TOOLBOX, 27" WIDE, 18" DEEP, 40" TALL

69
ASHLEY 1660E WOOD STOVE, 3 YEARS OLD, ELECTRIC BLOWER, W/ ASSORTED STOVE PIPE

70
ASSORTED HAND TOOLS

71
CHICAGO ELECTRIC WELDER CART W/CONTENTS, HOSE, REGULATOR, GROUND CABLE (TANK NOT INCLUDED)
CHICAGO ELECTRIC WELDER CART W/CONTENTS, HOSE, REGULATOR, GROUND CABLE (TANK  NOT INCLUDED)

72
STEEL BANDING CART AND TOOLS,

73
STIHL GAS POWERED CONCRETE SAW W/ 2 BLADES

74
DEWALT CHOP SAW ON STAND

75
DELTA GRINDER ON STAND

76
PALLET OF GRINDER WHEELS, TAPE, WIRE WHEELS FILTER WRENCHES, MAP/PROPANE TORCHES

77
PALLET OF GRINDER WHEELS, FLAP WHEELS, ALLEN WRENCHES, DRILL BITS & MISC.

78
KT METRIC WRENCH SET, PIPE WRENCH, POP RIVET TOOL, METRIC ½” SOCKETS, VISE GRIPS, HOLE SAW, MASONRY BITS, SCREW DRIVERS

79
3/8” METRIC SOCKET SET, TAP AND DIE SET, SNAP RING PLIERS, MISC. SOCKETS, BOSH LASER, ¾” SOCKET SET, SAE ½” IMPACT SOCKET SET,

80
4) TOOLBOXES 3) SMITH TORCH SETS W/ REGULATORS, HOSE, CUTTING HEADS

80
RIDGID 700-T2 ELECTRIC PIPE THREADER, NO DIES
80a. RIDGID 700-T2 ELECTRIC PIPE THREADER, NO DIES

81
ASSORTED HARDWARE

82
CONDUIT BENDER, 2) STRIKING WRENCHES, TOOL BAGS, SOAP STONES, ASSORTED PULLERS, ROPE, TORCH HEAD

83
QTY OF HAMMERS, SAWS, 2) TOOL SETS

84
ASSORTED SAE WRENCHES, DRILL BITS, MASONRY BITS, SCREW DRIVERS

85
CHECK-A-THREAD, RYOBI BENCH GRINDER, IRWIN VISE, TAP AND DIE SET, CENTRAL FORGE PIPE THREADER W/DIES

85
WILLIAMS ¾ SOCKET SET W/ RATCHET, EXTENSION, BREAKER BAR

86
ASSORTED ELECTRICAL CONNECTORS, HEAT SHRINK, WIRE BRUSHES, LEVELS, GLOVES, TIN SNIPS, CASTER WHEELS, PUNCHES AND CHISELS

87
DEWALT CORDED BAND SAW, 2) DEWALT 7” ANGLE GRINDERS, 2) DEWALT 4” ANGLE GRINDERS

88
DEWALT 18V CORDLESS TOOLS, 2) GRINDERS, 4) DRILLS, 2) BATTERIES, 2 CHARGERS, CARRYING BAG

89
MILWAUKEE CORDED TOOLS, CIRCULAR SAW, DRILL, 2) 4” ANGLE GRINDERS

90
MILWAUKEE CORDED TOOLS, 7” ANGLE GRINDER, 4” ANGLE GRINDER, 2) DIE GRINDERS

91
MILWAUKEE CORDED GRINDERS, 3) 4” GRINDERS, 1) 7” GRINDER

92
MILWAUKEE CORDED TOOLS, 2) DRILLS, 1) DIE GRINDER

93
MILWAUKEE CORDLESS TOOLS, SAWZALL, LIGHT, CIRCULAR SAW, DRILL, IMPACT DRIVER, GRINDER, 7) BATTERIES, 2) CHARGERS, 2) CARRYING BAGS

94
MILWAUKEE CORDLESS TOOLS, SAWZALL, LIGHT, CIRCULAR SAW, DRILL, IMPACT DRIVER, GRINDER, 7 BATTERIES, 2) CHARGERS, 2) CARRYING BAGS

95
MAKITA 4” GRINDER, BOSH HAMMER DRILL, MACHE V ELECTRIC HAMMER

96
2) BOSCH HAMMER DRILLS, DRILL, 2) 4” GRINDERS
2) BOSCH HAMMER DRILLS, DRILL, 2) 4” GRINDERS

97
DREMEL TOOL, METABO SCREW GUN, BLACK AND DECKER ROTARY TOOL, CRAFTSMAN 19.2 V DRILL AND BATTERY, LINCOLN ELECTRIC GREASE GUN

98
MILWAUKEE MAGNETIC DRILL PRESS W/ ASSORTED ANNULAR CUTTERS

99
MILWAUKEE MAGNETIC DRILL PRESS W/ ASSORTED ANNULAR CUTTERS AND CHUCK

100
MILWAUKEE MAGNETIC DRILL PRESS W/ ASSORTED ANNULAR CUTTERS

101
MILWAUKEE M12 CORDLESS INSPECTION CAMERA W/ CHARGER AND BATTERY

102
MILWAUKEE 90 DEGREE CORDED ANGLE DRILL

103
MILWAUKEE M18 FUEL ½” IMPACT W/ BATTERY AND CHARGER

104
BOSCH HAMMER DRILL W/ BITS

105
BOSCH HAMMER DRILL

106
BOSCH HAMMER DRILL W/ BITS

107
BOSCH HAMMER DRILL

108
WEN HEAT GUN

109
MASTER HAND JIG SAW

110
BLACK & DECKER 12V DRILL, LIGHT, 2) BATTERIES AND 1) CHARGER
BLACK & DECKER 12V DRILL, LIGHT, 2) BATTERIES AND 1) CHARGER

110
ALLIGATOR RSC187 BELT SPLICING TOOL

111
WELLER SOLDERING GUN

111
EASY TAPPER HOT PIPE TAP

112
CHICAGO PNEUMATIC 1” IMPACT GUN

113
RIDGID RATCHETING PIPE THREADER W/ DIES,

114
RIDGID RATCHETING PIPE THREADER W/DIES

115
DEWALT RECIPROCATING SAW

116
MILWAUKEE HOLE SAW SET

117
MILWAUKEE CORDED DRILL

118
MILWAUKEE M18 FUEL CORDLESS BAND SAW W/ CHARGER AND BATTERY

119
MILWAUKEE M18 FUEL CORDLESS BAND SAW W/CHARGER AND BATTERY

120
MILWAUKEE CORDED BAND SAW

121
MILWAUKEE CORDED BAND SAW

122
STEEL WORK BENCH ON CASTER WHEELS, 24' LONG,33" WIDE, 40" TALL
STEEL WORK BENCH ON CASTER WHEELS

123
ASSORTED RATCHET STRAPS

124
TARPS, CABLE, ROPE, FLASHLIGHTS, PAILS,

125
ASSORTED SOCKETS, CREW DRIVERS, COMBINATION WRENCHES, TEKTON ANGLE WRENCH SET, 1 5/16” – 1 ½”

126
BIN LIFTER, HOSE, FLANGES, MISC.

127
AIR TOOLS, WEATHERSTRIPPING, GRINDER WHEELS MASONRY BITS, PULLEYS,

128
TOOLBOX WITH CONTENTS 2) BOXES MISC HAND TOOLS, 2) PAILS
TOOLBOX WITH CONTENTS, 2) BOXES MISC HAND TOOLS, 2) PAILS

129
FACE SHIELDS, VESTS, HARDHATS, FACE MASKS

130
3) POSI LOCK PULLERS, STEEL SHAFT, CLAMPS. FLAG, RTV SEALANT

131
MICROWAVE, OVERHEAD PROJECTOR, CLEANING PRODUCTS, ELECTRONIC SCALE, STEEL STOOL,

132
2) LEVER CHAIN HOISTS, 5) CHAIN HOISTS, 2) BEAM CLAMPS

133
MISC. HARDWARE

134
PALLET RACKING 37' WIDE, 4' DEEP, 16' TALL

135
LAWSON BOLT BIN W/ ASSORTED GRADE 8 SAE CORSE THREAD BOLTS

136
4) SHELVING UNITS,

137
3) WIRE SHELVES

138
2 WHEEL DOLLY

139
18) LIGHTS

140
ASSORTED SAFETY HARNESSES

141
ASSORTED 220V POWER CORDS,

142
TEKTON AIR HOSE REEL, MANUAL HOSE REEL, ASSORTED AIR HOSE AND FITTINGS

143
TORCH CART

143
TORCH CART

144
TORCH CART

145
TORCH CART W/HOSES/ SMITH REGULATORS AND CUTTING HEAD

146
TORCH CART

147
TORCH CART W/ HOSES / SMITH REGULATORS AND CUTTING HEAD, TORCH CART (TANKS NOT INCLUDED)

148
TORCH CART

149
TOTE OF ASSORTED ELECTRICAL BOXES, CONDUIT PARTS, WIRE,

150
2) CRATES OF PAINT SUPPLIES, ROLLERS, ROLLER TRAYS

151
ASSORTED PAINT

152
2) RIDGID PIPE VISE STANDS, ASSORTED FOLD-A-JACK STANDS

153
2) RIDGID PIPE VISE STANDS, ASSORTED FOLD-A-JACK STANDS

154
2) RIDGID PIPE VISE STANDS, ASSORTED FOLD-A-JACK STANDS

155
STEEL CABINET AND ORGANIZERS

156
4 WHEEL BAGGAGE CART W/ CONTENTS

157
QUINCY 2 STAGE 5 HP 60-GAL AIR COMPRESSOR, 230V 1 PHASE

157
4 WHEEL BAGGAGE CART (MOWER NOT INCLUDED)

158
2) ST205/75R15 TRAILER TIRES ON 6 BOLT WHEELS

159
PORTABLE AIR TANK,

160
FUEL TRANSFER TANK W/ GPI 12V PUMP, HOSE, AUTO SHUT OFF NOZZLE,

161
ASSORTED STEEL

162
HOMELITE WEED EATER(NEEDS REPAIR), 48” FORK
HOMELITE WEED EATER (NEEDS REPAIR), 48” FORK

163
TRAILER MOVER TO FIT FORKS

164
PERFORMAX BALL BEARING TOOL CHEST, 2 DRAWER FILE CABINET, BUYERS UNDER BODY BOX,

165
3) OVERHEAD TROLLEYS, 13 BEAM CLAMPS

166
5) WATER FIRE EXTINGUISHERS, SMALL FIRE EXTINGUISHERS, LEVELS, SQUARES, FAN

167
ASSORTED STEEL

168
3) SHOP CREEPERS

169
RACK WITH CONTENTS

170
STEEL CART ON CASTERS W/CONTENTS

171
4 WHEEL CART

172
PIPE CART

173
PIPE CART

174
PIPE CART

175
GRASSHOPPER PIPE DOLLY

176
PIPE CART

176
PIPE CART

177
SAFETY CONES

178
CARDBOARD BOXES

179
CAULKING, GLUE GUN, GLUE STICKS, WELDING CURTIN, ROPE

180
2) JUSTRITE 5 GAL FUEL CANS,MISC. GRINDER WHEELS, PAINT SUPPLIES, HARDWARE, IMPACT SOCKETS, GREASE GUN
2) JUSTRITE 5 GAL FUEL CANS, MISC. GRINDER WHEELS, PAINT SUPPLIES, HARDWARE, IMPACT SOCKETS, GREASE GUN

181
OVERHEAD TROLLY, 5) HYD BOTTLE JACKS, 2) FOLDABLE SAWHORSES, ASSORTED CHAIN HOIST, BEAM CLAMPS

182
PAINTING SUPPLIES

183
WEED BURNER, TORCH HOSES,

184
EXTENSION CORDS

185
WELDING LEADS

186
TAC BOARD, WHITE BOARD, FOLDING CHAIRS

187
2) JUSTRITE 5 GAL FUEL CANS,OIL, FILTERS DUST PANS

188
PLASTIC TARPS, RAMPS, WHEEL CHOCKS

189
MOP BUCKET, SPRAYER, TRIPOD, WATER COOLER

190
HARNESSES

191
2) JUSTRITE 5 GAL FUEL CANS,MISC. SHOP SUPPLIES, PAINT, CLEANERS, CAULKING,

192
2) JUSTRITE 5 GAL FUEL CANS,OIL, GAS CANS, PAIL PUMPS, GREASE GUNS

193
CONDUIT, STEEL

194
PEG BOARD ORGANIZERS, BELTING, HOSE,

195
2) JUSTRITE 5 GAL FUEL CANS,GAS CANS, DRIP PANS

196
2) JUSTRITE 5 GAL FUEL CANS,CAULKING, SHOP SUPPLIES,

197
2) JUSTRITE 5 GAL FUEL CANS, PLASTICGAS CANS
2) JUSTRITE 5 GAL FUEL CANS, PLASTIC GAS CANS

198
BROOMS, MOPS, SHOVEL

199
SHOVELS, BROOMS

200
MY-TE AC36B 3000 LB 110V ELECTRIC WINCH

201
PALLET JACK

202
PALLET JACK

203
PALLET JACK

204
PALLET JACK

204
PALLET JACK

205
PALLET JACK

205
PALLET JACK

206
2 WHEEL DOLLY

207
2 WHEEL DOLLY

208
2 WHEEL DOLLY

209
2 WHEEL DOLLY

210
PAINT, OIL, 2) SMALL TIRES

211
2) STEEL FOLDABLE SAWHORSES, SAFETY HARNESSES

211
JET 2 TON CHAIN HOIST

212
5) CHAIN HOISTS

212
JET 1.5 TON CHAIN HOIST

212
JET 2 TON CHAIN HOIST

212
MAGNA 1.5 TON LEVER CHAIN HOIST

213
3) CHAIN HOISTS, 4 ) SMALLER LEVER CHAIN HOISTS, CLEVISIS, LIFTING CHAIN, MISC

213
JET 1.5 TON CHAIN HOIST

213
NEW IN BOX JET 1.5 TON CHAIN HOIST

213
MAGNA 2 TON CHAIN HOIST

214
SHOP MAGNET

215
TORIN PORTA POWER

216
WELDING WIRE

217
PAD TAMPER W/ HONDA 4.0 ENGINE

218
JACKSON WHEELBARROW

219
FOLDING CHAIR CART, TARP, STANDS

220
SHOP VAC, ELEC MOTOR, SHOP SUPPLIES

221
ASSORTED PNEUMATIC PARTS, RATCHET STRAPS

222
DUST BLOWER

223
DOOR DOLLY

224
METAL STANDS

225
BLACK WIDOW SHOP CART 2 DRAWER

225
WILLIAMS TOOL SET, SAE & METRIC 1/2" DRIVE SOCKET SETS, SAE & METRIC 3/8" SOCKET SETS, 2)LOCKING PLIERS, 2)HAMMERS, 2) PRY BARS, ASSORTED NUTDRIVERS AND SREW DRIVERS, SAE & METRIC WRENCHES
WILLIAMS TOOL SET, SAE & METRIC 1/2" DRIVE SOCKET SETS, SAE & METRIC 3/8" SOCKET SETS, 2)LOCKING PLIERS, 2)HAMMERS, 2) PRY BARS, ASSORTED NUTDRIVERS AND SREW DRIVERS, SAE & METRIC WRENCHES

226
PARTIAL BARREL OF 15W40 OIL W/PUMP

227
TOOL SHOP PARTS WASHER

228
SHELVING UNIT, 8' WIDE, 2' DEEP, 7' TALL
SHELVING UNIT 8' WIDE, 2' DEEP, 7' TALL

229
ASSORTED THREADED ROD AND ORGANIZERS

230
MISC. HARDWARE, CABLE, BRACKETS

231
CHOP SAW, PLASTIC

232
TAR PAPER, STRETCH WRAP, TOOL BOX, TIE DOWN STRAPS

233
2) RIDGID PIPE VISE STANDS

234
PRONTO ELECTRIC WHEEL CHAIR, CONDITION U/K

235
PIPE FLANGES

236
MOTORS, VALVES

237
LARGE STEEL FITTINGS

237
ASSORTED PLASTIC

238
ASSORTED PIPE FLANGES

239
FITTINGS, TOOL BUCKETS, CHAIN BINDERS, DAYTON DIAPHRAGM PUMP

240
FIRE EXTINGUISHERS, WHITE BOARD, WATER COOLERS

241
GARDEN HOSES, ROPE

242
ASSORTED HARNESSES, SINK, BLUEPRINT TUBES,

243
3) ROLLER STANDS

244
CRANE PADS

245
FLANGE GASKETS, FOAM, GASKET PAPER

246
PIPE FLANGES, PIPE HANGERS

247
VALVES, FITTINGS

248
2)PIPE DEFROSTERS

249
WIRE, ELECTRICAL CONNECTIONS

250
ELECTRICAL CORDS, HARNESS

251
CABLE PULLERS, BOAT GAS TANKS, CHAIN HOIST, MISC.

252
6)WELDING LEADS

252
5)WELDING LEADS

253
BELTING, FANS

254
PIPE FLANGES

255
2)HANDY MAN JACKS, SMITH TORCH SET, TORCH PARTS, HYD JACK, JACK STAND PARTS, LEVER HOIST, CHAIN HOIST

256
CABINETS, PLASTIC, VENT HOSE, FIRE EXTINGUISHER

257
ROPE

258
EXTENSION CORDS

259
HARNESSES, OXY/ACETYLENE HOSE, AIR HOSE,

260
7) SUMNER PRO-ROLL PIPE STANDS

261
BILJAX SCAFFOLDING, 22) UPRIGHTS, 5) PLANKS, ASSORTED CROSSMEMBERS AND WHEELS

262
WERNER 24' EXTENSION LADDER

263
WERNER 24' EXTENSION LADDER

265
WERNER 6' STEP LADDER, WERNER 10' STEP LADDER

266
2)SMALL STEP LADDERS, HUSKY 6' STEP LADDER, WERNER 6' STEP LADDER

267
WERNER 8' STEP LADDER (NEEDS REPAIR), WERNER 10' STEP LADDER

268
WERNER 6' STEP LADDER, WERNER 24' EXTENSION LADDER

269
WERNER 6' STEP LADDER, WERNER 12' STEP LADDER

270
WERNER 6' STEP LADDER, KELLER 8' STEP LADDER

271
WERNER 8' STEP LADDER, WERNER 10' STEP LADDER

272
WERNER 24' EXTENSION LADDER

273
RIGID PIPE VISE STAND, 11) SUMMNER PIPE STANDS

273
RIGID PIPE VISE STAND, 11) SUMMNER PIPE STANDS

274
ASSORTED 4X8 SHEETS OF PLYWOOD AND OSB, TARP, PVC PIPE, INSULATION BOARD

275
KNAACK 2472 JOB MASTER CHEST

276
KNAACK 2472 JOB MASTER CHEST

277
ASSORTED FUSES, DRIVELINE COMPONENTS, COPPER TUBE, DUCT TUBE

278
POWER TROWEL, HONDA ENGINE

279
PORTABLE ELECTRIC CEMENT MIXER

280
CONCRETE FLOATS AND HANDLES

281
BAGS OF SAKRETE AND QUICKRITE, HAND TROWELS, REPAIR STANDS, CONCRETE EDGER, DRUM W/ REBAR STANDS & MISC.
BAGS OF SAKRETE AND QUICKRITE, HAND TROWELS, REPAIR STANDS, CONCRETE EDGER, DRUM W/ REBAR STANDS & MISC.

282
TARPS, ELECTRIC HAMMERS, ROLLER STAND, ROADSIDE EMERGENCY KIT, BELTING, STAKES,MISC

283
TANK CAGE (CONTENTS NOT INCLUDED)
TANK CAGE (CONTENTS NOT INCLUDED)

284
YARDMAN HYDRO LAWN TRACTOR W/DECK, KOHLER 15 HP

285
20' SHIPPING CONTAINER

285
40' SHIPPING CONTAINER

286
2000 GAL FUEL TANK W/ GAS BOY PUMP

287
BETTERBUILT 100 TRANSFER TANK W/HAND PUMP

288
ASSORTED PIPE

289
SCRAP IRON

290
SCRAP IRON

291
WOOD STEEL RACK W/CONTENTS
WOOD STEEL RACK W/CONTENTS

292
WOOD STEEL RACK W/CONTENTS
WOOD STEEL RACK W/CONTENTS

293
POLY TANK

294
ASSORTED HARDWARE, ROLLER STAND

295
ASSORTED CHAIN, HARDWARE, STAKES

296
CONCRETE VIBRATOR

297
CONCRETE VIBRATOR

298
20' 2"X5" MAGNESIUM SCREED

299
8 FIRE EXTINGUISHERS

300
ASSORTED YARD TOOLS, SHOVELS, BROOMS, RAKES

301
SUMP PUMP, HOSE, DISCHARGE HOSE

302
RUBBER BOOTS

303
REBAR BENDER

304
SKID STEER ATTACHMENT ADAPTER

305
12) TRASH CANS

306
FUEL CAN, TARP, BUCKETS

307
4) PATIO CHAIRS

308
4) FOLDING CHAIRS

309
2) OFFICE CHAIRS

310
4) DINING TABLE CHAIRS

311
WOOD SHOP TABLE

312
4) HAND SPRAYERS, LAWN EDGING

313
2)MINI FRIDGES

314
CANON IMAGEPROGRAF IPF785 – SN#BAAS3365
CANON IMAGEPROGRAF IPF785 – SN#BAAS3365

315
DRAFTING TABLE, W/ SHELF, 32”x111”, ***BUYER IS RESPONSIBLE FOR REMOVAL***
DRAFTING TABLE, W/ SHELF, 32”x111”, ***BUYER IS RESPONSIBLE FOR REMOVAL***

316
L SHAPE OFFICE DESK W/ HUTCH, 71”x83”

317
L SHAPE OFFICE DESK W/HUTCH, 71”x83”

318
RECEPTIONIST DESK, 71”X77”
RECEPTIONIST DESK, 71”x77”

319
4) PADDED CHAIRS

320
3)OFFICE CHAIRS

321
5)SMALL FILE CABINETS

322
TWO PADDED CHAIRS

323
WOOD CART AND STOOL

324
JACKSON WHEELBARROW W/ RAIN COATS

325
PLASTIC, SUBWOOFER, WATER HEATER