Proxibid K&K
Previous Page Listing ID#: 206294

Auction Location
na, IN na
Full Address Available on Tuesday, Jun 16
Auction Dates and TimesSALE IS COMPLETED
Wednesday Jun 17, 2020 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Information

50
Log Deck
10'x20', 3-strand w/hydraulic Tulsa drive w/stop-n-load. Deck & chain is in excellent condition.

21
Skid of electric Motors*
Good working Condition

51
Mellot Debarker
36" new head, comes w/Mellot cab & controls. Includes starter as marked. This unit is in very good conditions.

22
ARC Welder*
AC-225, Good working Condition

51A
Cornell Barn Sweep
25' Flat under debarker, w/30' incline, electric drive. Good condition. Chain & paddles almost new!

23
Wire Welder*
Miller Wire Welder, model CP-200

52
CMC Log Trough
38' Morbark w/2 sets of kickers (one in at each end), hydraulic drive, electric eye auto stop, includes 10hp hydraulic unit. Excellent condition!

24
Fifth Wheel*
Semi, Good Condition

52A
Gruendler Grinder/Hog
New hammers installed 6 months before shut down, 5'x16' in-feed vibrating conveyor, 10"x60" capacity, meter reads 7115hrs, 125hp electric motor, Model 2860, s/n 500279. This is a very nice, solid unit.

25
Hydraulic Hoses*
1/2" , 1 1/2", Good Condition

52B
Concave Belt Conveyor
24"x40' electric drive, w/brand new Chevron seamless belt. Excellent condition!

26
Montgomery Hog Screens*
2-36", Good Condition

53
Log Deck
6'x58' w/stop-n-load, electric drive. In close to new condition.

27
Skid of electrical boxes & switches*

54
Mellot Log Turner
Mellot 38" hydraulic drive. Includes controls in cab. Close to new condition.

28
Sprocket*
27", 3- 3/4 shaft

55
Cleereman Carriage
36", 3 HB, air set works, s/n 36-219. This only cut 140,000' of lumber since being completely rebuilt. In close to new condition! Fully air, 12'6" carriage, includes controls in cab.

29
Blower Fan*
20"

55A
Cleereman Track, Frame, & Drive
50" center to center, 45' long, hydraulic directed drive, 10,000 series, Charlyn motor. All in like new condition!

30
Skid of Pulleys*
variety of sizes, v-pulley, Good Condition

55B
Cleereman Husk
w/off 5' off bearer belt conveyor, 56" blade. All in excellent condition!

31
32" Power Shaft*
good Condition

55C
Hydraulic Feed for Mill
Charlyn gear pump (30GPM), 50hp electric motor, includes starter. Like new condition!

32
Power Shaft*
54" GP log trough power shaft, Good Condition

55D
Hydraulic Unit
15hp, includes starter, feeds stop-n-load, & log turner. Excellent condition!

33
Rollcase Rollers*
18" x 12" rollers w/gearbox, Good Condition

55E
Electric Motor
125hp on Husk. Good motor.

34
Rollcase Rollers*
variety of rollers, 36"

55F
Steel Sawyers Cab
4'x4', w/AC unit. Good Condition!

35
Waste Auger*
7' long, 9" diameter, Good Condition

56
Cedar Creek Vertical Edger
3 blades, 40hp electric motor. Includes controls in cab & starter for motor.

36
Skid of Belts*
24" x 160', one roll is 18", other one is 20" wide

56A
Entirety Lot
Lots 53 thru 56 in its entirety w/10% raise

37
Chains*
a sorted chains, log deck, Good Condition

57
Pendu Style Barn Sweep
30' flat under Cleereman carriage, plus 30' incline, electric drive. Excellent condition.

38
Waste Conveyor Chains*
new condition

57A
Belt Conveyor
20"x10' , electric drive , excellent condition

39
Mixer*
used to make Grinding stones, working condition

57B
Mellott Transfer Deck
4 strand , 9' w x 5' l , W-C 55 roof top chain, electric drive , excellent condition , like new !

40
Gear Boxes*
Skid of a sorted gear boxes, working condition

58
Mellot Log Deck
9'x32', 3 strand, hydraulic Tulsa drive, w/stop-n-load

41
Chipper Chute*
30" long, transition chute

59
Renco Log Turner
36", Has been rebuilt, includes controls in cab.

42
Hydraulic Cylinders*
skid of a sorted Hydraulic cylinders, Good Condition

60
Meadows Carriage
36" w/Montgomery HB, hydraulic set works, bottom dog turners, fully hydraulic, 14'6" carriage, includes Husk, 56" blade, 20"x13' off bearer belt, 46' of track & frame, drive feed disconnect & starter as marked, & 5'x6' cab.

43
Hydraulic Power Unit*
needs motor

60A
Electric Motor
125hp on mill.

44
Hydraulic Power Unit*
10 hp electric motor, Good working Condition

61
Renco Vertical Edger
w/40hp motor, includes controls in cab

45
Hydraulic Power Unit*
5 hp electric motor, Good working Condition

61A
Circle Saw
56". Good condition.

46
Electric Motor*
25 hp, 3 phase, works

61B
Circle Saw
56". Good condition.

47
Engine Coolant*
55 gal unopened 50/50 premix

61C
Circle Saw
56". Good condition.

48
Belt Conveyor*
10" x 21' , no drive, needs new belt

61D
Circle Saw
56". Fair condition.

49
Belt Waste Conveyor*
10" x 11' Flat and 15' incline, no drive , Good Condition

61E
Circle Saw
52". Good condition.

50
Log Deck
10'x20', 3-strand w/hydraulic Tulsa drive w/stop-n-load. Deck & chain is in excellent condition.

62
Dust Drag Chain
45', 8" paddles, electric drive. Good condition.

51
Mellot Debarker
36" new head, comes w/Mellot cab & controls. Includes starter as marked. This unit is in very good conditions.

62A
Cornell Dust Blower
26"w/10hp electric motor. In very good condition.

51A
Cornell Barn Sweep
25' Flat under debarker, w/30' incline, electric drive. Good condition. Chain & paddles almost new!

62B
Drop Belt Conveyor
20"x10' electric drive, w/air cylinder.

51B
Entirety Lot 50 to 51A
With a 10%raise

62C
Simplicity Vibrating Conveyor
30"x15' w/electric drive, includes chipper mouth for 48" Morbark chipper. Good condition.

52
CMC Log Trough
38' Morbark w/2 sets of kickers (one in at each end), hydraulic drive, electric eye auto stop, includes 10hp hydraulic unit. Excellent condition!

63
Morbark Chipper
48", 3 knife, good condition top discharge (no motor). Completely reconditioned just 4 months before shutdown!

52A
Gruendler Grinder/Hog
New hammers installed 6 months before shut down, 5'x16' in-feed vibrating conveyor, 10"x60" capacity, meter reads 7115hrs, 125hp electric motor, Model 2860, s/n 500279. This is a very nice, solid unit.

63A
Electric Motor
60hp (on chipper)

52B
Concave Belt Conveyor
24"x40' electric drive, w/brand new Chevron seamless belt. Excellent condition!

63B
Steel 90* Elbow
Heavy, 10" in & out let. Brand new!

53
Log Deck
6'x58' w/stop-n-load, electric drive. In close to new condition.

63C
PVC Pipe
10"x56'

54
Mellot Log Turner
Mellot 38" hydraulic drive. Includes controls in cab. Close to new condition.

64
Leroi Air Compressor
25hp, 115 CFPM. Very good unit!

55
Cleereman Carriage
36", 3 HB, air set works, s/n 36-219. This only cut 140,000' of lumber since being completely rebuilt. In close to new condition! Fully air, 12'6" carriage, includes controls in cab.

65
Corley board Edger
4"x24" w/in-feed & out-feed, w/2 blades (1 moveable), electric motor sell w/machine.

55A
Cleereman Track, Frame, & Drive
50" center to center, 45' long, hydraulic directed drive, 10,000 series, Charlyn motor. All in like new condition!

67
Green Chain
4 Strand, 10'x21' electric drive, C55D rooftop chain. Set outside, but is still in good condition.

55B
Cleereman Husk
w/off 5' off bearer belt conveyor, 56" blade. All in excellent condition!

68
Baker Grade Run Around Resaw
w/controls, s/n 2K-2919. Good condition.

55C
Hydraulic Feed for Mill
Charlyn gear pump (30GPM), 50hp electric motor, includes starter. Like new condition!

70
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

55D
Hydraulic Unit
15hp, includes starter, feeds stop-n-load, & log turner. Excellent condition!

71
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

55E
Electric Motor
125hp on Husk. Good motor.

72
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

55F
Steel Sawyers Cab
4'x4', w/AC unit. Good Condition!

73
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

56
Entirety Lot
Lots 53 thru 55F in its entirety w/10% raise

74
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

56A
Cedar Creek Vertical Edger
3 blades, 40hp electric motor. Includes controls in cab & starter for motor.

75
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

57
Pendu Style Barn Sweep
30' flat under Cleereman carriage, plus 30' incline, electric drive. Excellent condition.

76
Sticker Cart
42"x66" w/caster wheels, full of dried sticks.

57A
Belt Conveyor
20"x10' , electric drive , excellent condition

77
Sticker Cart
45"x72" w/caster wheels, full of dried sticks.

57B
Mellott Transfer Deck
4 strand , 9' w x 5' l , W-C 55 roof top chain, electric drive , excellent condition , like new !

58
Mellot Log Deck
9'x32', 3 strand, hydraulic Tulsa drive, w/stop-n-load

801
Cornell Slabsaw
Model ATC, 24" blade, automatic, electric motor, safety cage, Good working Condition

59
Renco Log Turner
36", Has been rebuilt, includes controls in cab.

802
off feed Belt
16" x 18', Good Working Condition

60
Meadows Carriage
36" w/Montgomery HB, hydraulic set works, bottom dog turners, fully hydraulic, 14'6" carriage, includes Husk, 56" blade, 20"x13' off bearer belt, 46' of track & frame, drive feed disconnect & starter as marked, & 5'x6' cab.

803
Corley Handset Sawmill
2HB, 40' of track, has foot receder, 48" simonds saw blade, everything is belt driven, can handle up to 10' logs, 45" center to center track, Complete Mill, still in good working condition!

60A
Electric Motor
125hp on mill.

61
Renco Vertical Edger
w/40hp motor, includes controls in cab

61A
Circle Saw
56". Good condition.

61B
Circle Saw
56". Good condition.

61C
Circle Saw
56". Good condition.

61D
Circle Saw
56". Fair condition.

61E
Circle Saw
52". Good condition.

62
Dust Drag Chain
45', 8" paddles, electric drive. Good condition.

62A
Cornell Dust Blower
26"w/10hp electric motor. In very good condition.

62B
Drop Belt Conveyor
20"x10' electric drive, w/air cylinder.

62C
Simplicity Vibrating Conveyor
30"x15' w/electric drive, includes chipper mouth for 48" Morbark chipper. Good condition.

63
Morbark Chipper
48", 3 knife, good condition top discharge (no motor). Completely reconditioned just 4 months before shutdown!

63A
Electric Motor
60hp (on chipper)

63B
Steel 90* Elbow
Heavy, 10" in & out let. Brand new!

63C
PVC Pipe
10"x56'

64
Leroi Air Compressor
25hp, 115 CFPM. Very good unit!

65
Corley board Edger
4"x24" w/in-feed & out-feed, w/2 blades (1 moveable), electric motor sell w/machine.

67
Green Chain
4 Strand, 10'x21' electric drive, C55D rooftop chain. Set outside, but is still in good condition.

68
Baker Grade Run Around Resaw*
w/controls, s/n 2K-2919. Complete run around. Good condition. 
NOTE: This resaw will be sold offsite. It is located approx. 15 miles from the auction location at 8597 M68-33 HWY Onaway MI *

70
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

71
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

72
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

73
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

74
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

75
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

76
Sticker Cart
42"x66" w/caster wheels, full of dried sticks.

77
Sticker Cart
45"x72" w/caster wheels, full of dried sticks.

800
Grapple Skidder
1990 John Deere grapple Skidder 648D has new tires on the rear, new seat, grapple has 7' spread, nice tight machine, good working condition, Sells with low reserve.

801
Cornell Slabsaw
Model ATC, 24" blade, automatic, electric motor, safety cage, Good working Condition

802
off feed Belt
16" x 18', Good Working Condition

803
Corley Handset Sawmill
2HB, 40' of track, has foot receder, 48" simonds saw blade, everything is belt driven, can handle up to 10' logs, 45" center to center track, Complete Mill, still in good working condition!
Photo Gallery



















































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Sponsored Links

Proxibid K&K

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
na, IN na
Full Address Available after 9 am
on Tuesday, Jun 16
Sale Dates and Times
Wednesday Jun 17, 2020 Completed
Sale Terms and Conditions

Listing Details

50
Log Deck
10'x20', 3-strand w/hydraulic Tulsa drive w/stop-n-load. Deck & chain is in excellent condition.

21
Skid of electric Motors*
Good working Condition

51
Mellot Debarker
36" new head, comes w/Mellot cab & controls. Includes starter as marked. This unit is in very good conditions.

22
ARC Welder*
AC-225, Good working Condition

51A
Cornell Barn Sweep
25' Flat under debarker, w/30' incline, electric drive. Good condition. Chain & paddles almost new!

23
Wire Welder*
Miller Wire Welder, model CP-200

52
CMC Log Trough
38' Morbark w/2 sets of kickers (one in at each end), hydraulic drive, electric eye auto stop, includes 10hp hydraulic unit. Excellent condition!

24
Fifth Wheel*
Semi, Good Condition

52A
Gruendler Grinder/Hog
New hammers installed 6 months before shut down, 5'x16' in-feed vibrating conveyor, 10"x60" capacity, meter reads 7115hrs, 125hp electric motor, Model 2860, s/n 500279. This is a very nice, solid unit.

25
Hydraulic Hoses*
1/2" , 1 1/2", Good Condition

52B
Concave Belt Conveyor
24"x40' electric drive, w/brand new Chevron seamless belt. Excellent condition!

26
Montgomery Hog Screens*
2-36", Good Condition

53
Log Deck
6'x58' w/stop-n-load, electric drive. In close to new condition.

27
Skid of electrical boxes & switches*

54
Mellot Log Turner
Mellot 38" hydraulic drive. Includes controls in cab. Close to new condition.

28
Sprocket*
27", 3- 3/4 shaft

55
Cleereman Carriage
36", 3 HB, air set works, s/n 36-219. This only cut 140,000' of lumber since being completely rebuilt. In close to new condition! Fully air, 12'6" carriage, includes controls in cab.

29
Blower Fan*
20"

55A
Cleereman Track, Frame, & Drive
50" center to center, 45' long, hydraulic directed drive, 10,000 series, Charlyn motor. All in like new condition!

30
Skid of Pulleys*
variety of sizes, v-pulley, Good Condition

55B
Cleereman Husk
w/off 5' off bearer belt conveyor, 56" blade. All in excellent condition!

31
32" Power Shaft*
good Condition

55C
Hydraulic Feed for Mill
Charlyn gear pump (30GPM), 50hp electric motor, includes starter. Like new condition!

32
Power Shaft*
54" GP log trough power shaft, Good Condition

55D
Hydraulic Unit
15hp, includes starter, feeds stop-n-load, & log turner. Excellent condition!

33
Rollcase Rollers*
18" x 12" rollers w/gearbox, Good Condition

55E
Electric Motor
125hp on Husk. Good motor.

34
Rollcase Rollers*
variety of rollers, 36"

55F
Steel Sawyers Cab
4'x4', w/AC unit. Good Condition!

35
Waste Auger*
7' long, 9" diameter, Good Condition

56
Cedar Creek Vertical Edger
3 blades, 40hp electric motor. Includes controls in cab & starter for motor.

36
Skid of Belts*
24" x 160', one roll is 18", other one is 20" wide

56A
Entirety Lot
Lots 53 thru 56 in its entirety w/10% raise

37
Chains*
a sorted chains, log deck, Good Condition

57
Pendu Style Barn Sweep
30' flat under Cleereman carriage, plus 30' incline, electric drive. Excellent condition.

38
Waste Conveyor Chains*
new condition

57A
Belt Conveyor
20"x10' , electric drive , excellent condition

39
Mixer*
used to make Grinding stones, working condition

57B
Mellott Transfer Deck
4 strand , 9' w x 5' l , W-C 55 roof top chain, electric drive , excellent condition , like new !

40
Gear Boxes*
Skid of a sorted gear boxes, working condition

58
Mellot Log Deck
9'x32', 3 strand, hydraulic Tulsa drive, w/stop-n-load

41
Chipper Chute*
30" long, transition chute

59
Renco Log Turner
36", Has been rebuilt, includes controls in cab.

42
Hydraulic Cylinders*
skid of a sorted Hydraulic cylinders, Good Condition

60
Meadows Carriage
36" w/Montgomery HB, hydraulic set works, bottom dog turners, fully hydraulic, 14'6" carriage, includes Husk, 56" blade, 20"x13' off bearer belt, 46' of track & frame, drive feed disconnect & starter as marked, & 5'x6' cab.

43
Hydraulic Power Unit*
needs motor

60A
Electric Motor
125hp on mill.

44
Hydraulic Power Unit*
10 hp electric motor, Good working Condition

61
Renco Vertical Edger
w/40hp motor, includes controls in cab

45
Hydraulic Power Unit*
5 hp electric motor, Good working Condition

61A
Circle Saw
56". Good condition.

46
Electric Motor*
25 hp, 3 phase, works

61B
Circle Saw
56". Good condition.

47
Engine Coolant*
55 gal unopened 50/50 premix

61C
Circle Saw
56". Good condition.

48
Belt Conveyor*
10" x 21' , no drive, needs new belt

61D
Circle Saw
56". Fair condition.

49
Belt Waste Conveyor*
10" x 11' Flat and 15' incline, no drive , Good Condition

61E
Circle Saw
52". Good condition.

50
Log Deck
10'x20', 3-strand w/hydraulic Tulsa drive w/stop-n-load. Deck & chain is in excellent condition.

62
Dust Drag Chain
45', 8" paddles, electric drive. Good condition.

51
Mellot Debarker
36" new head, comes w/Mellot cab & controls. Includes starter as marked. This unit is in very good conditions.

62A
Cornell Dust Blower
26"w/10hp electric motor. In very good condition.

51A
Cornell Barn Sweep
25' Flat under debarker, w/30' incline, electric drive. Good condition. Chain & paddles almost new!

62B
Drop Belt Conveyor
20"x10' electric drive, w/air cylinder.

51B
Entirety Lot 50 to 51A
With a 10%raise

62C
Simplicity Vibrating Conveyor
30"x15' w/electric drive, includes chipper mouth for 48" Morbark chipper. Good condition.

52
CMC Log Trough
38' Morbark w/2 sets of kickers (one in at each end), hydraulic drive, electric eye auto stop, includes 10hp hydraulic unit. Excellent condition!

63
Morbark Chipper
48", 3 knife, good condition top discharge (no motor). Completely reconditioned just 4 months before shutdown!

52A
Gruendler Grinder/Hog
New hammers installed 6 months before shut down, 5'x16' in-feed vibrating conveyor, 10"x60" capacity, meter reads 7115hrs, 125hp electric motor, Model 2860, s/n 500279. This is a very nice, solid unit.

63A
Electric Motor
60hp (on chipper)

52B
Concave Belt Conveyor
24"x40' electric drive, w/brand new Chevron seamless belt. Excellent condition!

63B
Steel 90* Elbow
Heavy, 10" in & out let. Brand new!

53
Log Deck
6'x58' w/stop-n-load, electric drive. In close to new condition.

63C
PVC Pipe
10"x56'

54
Mellot Log Turner
Mellot 38" hydraulic drive. Includes controls in cab. Close to new condition.

64
Leroi Air Compressor
25hp, 115 CFPM. Very good unit!

55
Cleereman Carriage
36", 3 HB, air set works, s/n 36-219. This only cut 140,000' of lumber since being completely rebuilt. In close to new condition! Fully air, 12'6" carriage, includes controls in cab.

65
Corley board Edger
4"x24" w/in-feed & out-feed, w/2 blades (1 moveable), electric motor sell w/machine.

55A
Cleereman Track, Frame, & Drive
50" center to center, 45' long, hydraulic directed drive, 10,000 series, Charlyn motor. All in like new condition!

67
Green Chain
4 Strand, 10'x21' electric drive, C55D rooftop chain. Set outside, but is still in good condition.

55B
Cleereman Husk
w/off 5' off bearer belt conveyor, 56" blade. All in excellent condition!

68
Baker Grade Run Around Resaw
w/controls, s/n 2K-2919. Good condition.

55C
Hydraulic Feed for Mill
Charlyn gear pump (30GPM), 50hp electric motor, includes starter. Like new condition!

70
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

55D
Hydraulic Unit
15hp, includes starter, feeds stop-n-load, & log turner. Excellent condition!

71
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

55E
Electric Motor
125hp on Husk. Good motor.

72
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

55F
Steel Sawyers Cab
4'x4', w/AC unit. Good Condition!

73
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

56
Entirety Lot
Lots 53 thru 55F in its entirety w/10% raise

74
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

56A
Cedar Creek Vertical Edger
3 blades, 40hp electric motor. Includes controls in cab & starter for motor.

75
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

57
Pendu Style Barn Sweep
30' flat under Cleereman carriage, plus 30' incline, electric drive. Excellent condition.

76
Sticker Cart
42"x66" w/caster wheels, full of dried sticks.

57A
Belt Conveyor
20"x10' , electric drive , excellent condition

77
Sticker Cart
45"x72" w/caster wheels, full of dried sticks.

57B
Mellott Transfer Deck
4 strand , 9' w x 5' l , W-C 55 roof top chain, electric drive , excellent condition , like new !

58
Mellot Log Deck
9'x32', 3 strand, hydraulic Tulsa drive, w/stop-n-load

801
Cornell Slabsaw
Model ATC, 24" blade, automatic, electric motor, safety cage, Good working Condition

59
Renco Log Turner
36", Has been rebuilt, includes controls in cab.

802
off feed Belt
16" x 18', Good Working Condition

60
Meadows Carriage
36" w/Montgomery HB, hydraulic set works, bottom dog turners, fully hydraulic, 14'6" carriage, includes Husk, 56" blade, 20"x13' off bearer belt, 46' of track & frame, drive feed disconnect & starter as marked, & 5'x6' cab.

803
Corley Handset Sawmill
2HB, 40' of track, has foot receder, 48" simonds saw blade, everything is belt driven, can handle up to 10' logs, 45" center to center track, Complete Mill, still in good working condition!

60A
Electric Motor
125hp on mill.

61
Renco Vertical Edger
w/40hp motor, includes controls in cab

61A
Circle Saw
56". Good condition.

61B
Circle Saw
56". Good condition.

61C
Circle Saw
56". Good condition.

61D
Circle Saw
56". Fair condition.

61E
Circle Saw
52". Good condition.

62
Dust Drag Chain
45', 8" paddles, electric drive. Good condition.

62A
Cornell Dust Blower
26"w/10hp electric motor. In very good condition.

62B
Drop Belt Conveyor
20"x10' electric drive, w/air cylinder.

62C
Simplicity Vibrating Conveyor
30"x15' w/electric drive, includes chipper mouth for 48" Morbark chipper. Good condition.

63
Morbark Chipper
48", 3 knife, good condition top discharge (no motor). Completely reconditioned just 4 months before shutdown!

63A
Electric Motor
60hp (on chipper)

63B
Steel 90* Elbow
Heavy, 10" in & out let. Brand new!

63C
PVC Pipe
10"x56'

64
Leroi Air Compressor
25hp, 115 CFPM. Very good unit!

65
Corley board Edger
4"x24" w/in-feed & out-feed, w/2 blades (1 moveable), electric motor sell w/machine.

67
Green Chain
4 Strand, 10'x21' electric drive, C55D rooftop chain. Set outside, but is still in good condition.

68
Baker Grade Run Around Resaw*
w/controls, s/n 2K-2919. Complete run around. Good condition. 
NOTE: This resaw will be sold offsite. It is located approx. 15 miles from the auction location at 8597 M68-33 HWY Onaway MI *

70
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

71
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

72
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

73
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

74
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

75
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

76
Sticker Cart
42"x66" w/caster wheels, full of dried sticks.

77
Sticker Cart
45"x72" w/caster wheels, full of dried sticks.

800
Grapple Skidder
1990 John Deere grapple Skidder 648D has new tires on the rear, new seat, grapple has 7' spread, nice tight machine, good working condition, Sells with low reserve.

801
Cornell Slabsaw
Model ATC, 24" blade, automatic, electric motor, safety cage, Good working Condition

802
off feed Belt
16" x 18', Good Working Condition

803
Corley Handset Sawmill
2HB, 40' of track, has foot receder, 48" simonds saw blade, everything is belt driven, can handle up to 10' logs, 45" center to center track, Complete Mill, still in good working condition!
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Proxibid K&K
 Live Auction
 
Auction Date(s)
Wednesday Jun 17, 2020 Completed
Auction Location
na, IN na
Full Address Available on Tuesday, Jun 16
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com


50
Log Deck
10'x20', 3-strand w/hydraulic Tulsa drive w/stop-n-load. Deck & chain is in excellent condition.

21
Skid of electric Motors*
Good working Condition

51
Mellot Debarker
36" new head, comes w/Mellot cab & controls. Includes starter as marked. This unit is in very good conditions.

22
ARC Welder*
AC-225, Good working Condition

51A
Cornell Barn Sweep
25' Flat under debarker, w/30' incline, electric drive. Good condition. Chain & paddles almost new!

23
Wire Welder*
Miller Wire Welder, model CP-200

52
CMC Log Trough
38' Morbark w/2 sets of kickers (one in at each end), hydraulic drive, electric eye auto stop, includes 10hp hydraulic unit. Excellent condition!

24
Fifth Wheel*
Semi, Good Condition

52A
Gruendler Grinder/Hog
New hammers installed 6 months before shut down, 5'x16' in-feed vibrating conveyor, 10"x60" capacity, meter reads 7115hrs, 125hp electric motor, Model 2860, s/n 500279. This is a very nice, solid unit.

25
Hydraulic Hoses*
1/2" , 1 1/2", Good Condition

52B
Concave Belt Conveyor
24"x40' electric drive, w/brand new Chevron seamless belt. Excellent condition!

26
Montgomery Hog Screens*
2-36", Good Condition

53
Log Deck
6'x58' w/stop-n-load, electric drive. In close to new condition.

27
Skid of electrical boxes & switches*

54
Mellot Log Turner
Mellot 38" hydraulic drive. Includes controls in cab. Close to new condition.

28
Sprocket*
27", 3- 3/4 shaft

55
Cleereman Carriage
36", 3 HB, air set works, s/n 36-219. This only cut 140,000' of lumber since being completely rebuilt. In close to new condition! Fully air, 12'6" carriage, includes controls in cab.

29
Blower Fan*
20"

55A
Cleereman Track, Frame, & Drive
50" center to center, 45' long, hydraulic directed drive, 10,000 series, Charlyn motor. All in like new condition!

30
Skid of Pulleys*
variety of sizes, v-pulley, Good Condition

55B
Cleereman Husk
w/off 5' off bearer belt conveyor, 56" blade. All in excellent condition!

31
32" Power Shaft*
good Condition

55C
Hydraulic Feed for Mill
Charlyn gear pump (30GPM), 50hp electric motor, includes starter. Like new condition!

32
Power Shaft*
54" GP log trough power shaft, Good Condition

55D
Hydraulic Unit
15hp, includes starter, feeds stop-n-load, & log turner. Excellent condition!

33
Rollcase Rollers*
18" x 12" rollers w/gearbox, Good Condition

55E
Electric Motor
125hp on Husk. Good motor.

34
Rollcase Rollers*
variety of rollers, 36"

55F
Steel Sawyers Cab
4'x4', w/AC unit. Good Condition!

35
Waste Auger*
7' long, 9" diameter, Good Condition

56
Cedar Creek Vertical Edger
3 blades, 40hp electric motor. Includes controls in cab & starter for motor.

36
Skid of Belts*
24" x 160', one roll is 18", other one is 20" wide

56A
Entirety Lot
Lots 53 thru 56 in its entirety w/10% raise

37
Chains*
a sorted chains, log deck, Good Condition

57
Pendu Style Barn Sweep
30' flat under Cleereman carriage, plus 30' incline, electric drive. Excellent condition.

38
Waste Conveyor Chains*
new condition

57A
Belt Conveyor
20"x10' , electric drive , excellent condition

39
Mixer*
used to make Grinding stones, working condition

57B
Mellott Transfer Deck
4 strand , 9' w x 5' l , W-C 55 roof top chain, electric drive , excellent condition , like new !

40
Gear Boxes*
Skid of a sorted gear boxes, working condition

58
Mellot Log Deck
9'x32', 3 strand, hydraulic Tulsa drive, w/stop-n-load

41
Chipper Chute*
30" long, transition chute

59
Renco Log Turner
36", Has been rebuilt, includes controls in cab.

42
Hydraulic Cylinders*
skid of a sorted Hydraulic cylinders, Good Condition

60
Meadows Carriage
36" w/Montgomery HB, hydraulic set works, bottom dog turners, fully hydraulic, 14'6" carriage, includes Husk, 56" blade, 20"x13' off bearer belt, 46' of track & frame, drive feed disconnect & starter as marked, & 5'x6' cab.

43
Hydraulic Power Unit*
needs motor

60A
Electric Motor
125hp on mill.

44
Hydraulic Power Unit*
10 hp electric motor, Good working Condition

61
Renco Vertical Edger
w/40hp motor, includes controls in cab

45
Hydraulic Power Unit*
5 hp electric motor, Good working Condition

61A
Circle Saw
56". Good condition.

46
Electric Motor*
25 hp, 3 phase, works

61B
Circle Saw
56". Good condition.

47
Engine Coolant*
55 gal unopened 50/50 premix

61C
Circle Saw
56". Good condition.

48
Belt Conveyor*
10" x 21' , no drive, needs new belt

61D
Circle Saw
56". Fair condition.

49
Belt Waste Conveyor*
10" x 11' Flat and 15' incline, no drive , Good Condition

61E
Circle Saw
52". Good condition.

50
Log Deck
10'x20', 3-strand w/hydraulic Tulsa drive w/stop-n-load. Deck & chain is in excellent condition.

62
Dust Drag Chain
45', 8" paddles, electric drive. Good condition.

51
Mellot Debarker
36" new head, comes w/Mellot cab & controls. Includes starter as marked. This unit is in very good conditions.

62A
Cornell Dust Blower
26"w/10hp electric motor. In very good condition.

51A
Cornell Barn Sweep
25' Flat under debarker, w/30' incline, electric drive. Good condition. Chain & paddles almost new!

62B
Drop Belt Conveyor
20"x10' electric drive, w/air cylinder.

51B
Entirety Lot 50 to 51A
With a 10%raise

62C
Simplicity Vibrating Conveyor
30"x15' w/electric drive, includes chipper mouth for 48" Morbark chipper. Good condition.

52
CMC Log Trough
38' Morbark w/2 sets of kickers (one in at each end), hydraulic drive, electric eye auto stop, includes 10hp hydraulic unit. Excellent condition!

63
Morbark Chipper
48", 3 knife, good condition top discharge (no motor). Completely reconditioned just 4 months before shutdown!

52A
Gruendler Grinder/Hog
New hammers installed 6 months before shut down, 5'x16' in-feed vibrating conveyor, 10"x60" capacity, meter reads 7115hrs, 125hp electric motor, Model 2860, s/n 500279. This is a very nice, solid unit.

63A
Electric Motor
60hp (on chipper)

52B
Concave Belt Conveyor
24"x40' electric drive, w/brand new Chevron seamless belt. Excellent condition!

63B
Steel 90* Elbow
Heavy, 10" in & out let. Brand new!

53
Log Deck
6'x58' w/stop-n-load, electric drive. In close to new condition.

63C
PVC Pipe
10"x56'

54
Mellot Log Turner
Mellot 38" hydraulic drive. Includes controls in cab. Close to new condition.

64
Leroi Air Compressor
25hp, 115 CFPM. Very good unit!

55
Cleereman Carriage
36", 3 HB, air set works, s/n 36-219. This only cut 140,000' of lumber since being completely rebuilt. In close to new condition! Fully air, 12'6" carriage, includes controls in cab.

65
Corley board Edger
4"x24" w/in-feed & out-feed, w/2 blades (1 moveable), electric motor sell w/machine.

55A
Cleereman Track, Frame, & Drive
50" center to center, 45' long, hydraulic directed drive, 10,000 series, Charlyn motor. All in like new condition!

67
Green Chain
4 Strand, 10'x21' electric drive, C55D rooftop chain. Set outside, but is still in good condition.

55B
Cleereman Husk
w/off 5' off bearer belt conveyor, 56" blade. All in excellent condition!

68
Baker Grade Run Around Resaw
w/controls, s/n 2K-2919. Good condition.

55C
Hydraulic Feed for Mill
Charlyn gear pump (30GPM), 50hp electric motor, includes starter. Like new condition!

70
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

55D
Hydraulic Unit
15hp, includes starter, feeds stop-n-load, & log turner. Excellent condition!

71
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

55E
Electric Motor
125hp on Husk. Good motor.

72
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

55F
Steel Sawyers Cab
4'x4', w/AC unit. Good Condition!

73
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

56
Entirety Lot
Lots 53 thru 55F in its entirety w/10% raise

74
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

56A
Cedar Creek Vertical Edger
3 blades, 40hp electric motor. Includes controls in cab & starter for motor.

75
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

57
Pendu Style Barn Sweep
30' flat under Cleereman carriage, plus 30' incline, electric drive. Excellent condition.

76
Sticker Cart
42"x66" w/caster wheels, full of dried sticks.

57A
Belt Conveyor
20"x10' , electric drive , excellent condition

77
Sticker Cart
45"x72" w/caster wheels, full of dried sticks.

57B
Mellott Transfer Deck
4 strand , 9' w x 5' l , W-C 55 roof top chain, electric drive , excellent condition , like new !

58
Mellot Log Deck
9'x32', 3 strand, hydraulic Tulsa drive, w/stop-n-load

801
Cornell Slabsaw
Model ATC, 24" blade, automatic, electric motor, safety cage, Good working Condition

59
Renco Log Turner
36", Has been rebuilt, includes controls in cab.

802
off feed Belt
16" x 18', Good Working Condition

60
Meadows Carriage
36" w/Montgomery HB, hydraulic set works, bottom dog turners, fully hydraulic, 14'6" carriage, includes Husk, 56" blade, 20"x13' off bearer belt, 46' of track & frame, drive feed disconnect & starter as marked, & 5'x6' cab.

803
Corley Handset Sawmill
2HB, 40' of track, has foot receder, 48" simonds saw blade, everything is belt driven, can handle up to 10' logs, 45" center to center track, Complete Mill, still in good working condition!

60A
Electric Motor
125hp on mill.

61
Renco Vertical Edger
w/40hp motor, includes controls in cab

61A
Circle Saw
56". Good condition.

61B
Circle Saw
56". Good condition.

61C
Circle Saw
56". Good condition.

61D
Circle Saw
56". Fair condition.

61E
Circle Saw
52". Good condition.

62
Dust Drag Chain
45', 8" paddles, electric drive. Good condition.

62A
Cornell Dust Blower
26"w/10hp electric motor. In very good condition.

62B
Drop Belt Conveyor
20"x10' electric drive, w/air cylinder.

62C
Simplicity Vibrating Conveyor
30"x15' w/electric drive, includes chipper mouth for 48" Morbark chipper. Good condition.

63
Morbark Chipper
48", 3 knife, good condition top discharge (no motor). Completely reconditioned just 4 months before shutdown!

63A
Electric Motor
60hp (on chipper)

63B
Steel 90* Elbow
Heavy, 10" in & out let. Brand new!

63C
PVC Pipe
10"x56'

64
Leroi Air Compressor
25hp, 115 CFPM. Very good unit!

65
Corley board Edger
4"x24" w/in-feed & out-feed, w/2 blades (1 moveable), electric motor sell w/machine.

67
Green Chain
4 Strand, 10'x21' electric drive, C55D rooftop chain. Set outside, but is still in good condition.

68
Baker Grade Run Around Resaw*
w/controls, s/n 2K-2919. Complete run around. Good condition. 
NOTE: This resaw will be sold offsite. It is located approx. 15 miles from the auction location at 8597 M68-33 HWY Onaway MI *

70
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

71
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

72
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

73
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

74
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

75
Lumber Cart
50"x96", w/12" wheels in rear & 10" swivel in front. Good condition.

76
Sticker Cart
42"x66" w/caster wheels, full of dried sticks.

77
Sticker Cart
45"x72" w/caster wheels, full of dried sticks.

800
Grapple Skidder
1990 John Deere grapple Skidder 648D has new tires on the rear, new seat, grapple has 7' spread, nice tight machine, good working condition, Sells with low reserve.

801
Cornell Slabsaw
Model ATC, 24" blade, automatic, electric motor, safety cage, Good working Condition

802
off feed Belt
16" x 18', Good Working Condition

803
Corley Handset Sawmill
2HB, 40' of track, has foot receder, 48" simonds saw blade, everything is belt driven, can handle up to 10' logs, 45" center to center track, Complete Mill, still in good working condition!