Fabricator of Pipe Supports and Metals
Previous Page Listing ID#: 204843

Auction Location

Hawthorne, NJ 07506
Auction Dates and TimesSALE IS COMPLETED
Thursday Jun 11, 2020 Completed
Tuesday Jun 16, 2020 Completed
Auction Type
 Live Auction  VIEW ONLINE CATALOG
Company Information
AuctionAdvisors

Contact: Oren Klein
Phone: 973-753-1313
Website: www.auctionadvisors.com

GoToAuction.com ID#: 6687
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Terms and Conditions These are the complete Terms and Conditions on which all property is offered for sale, subject to amendments and modifications announced by the Auctioneer at the time of the auction. By bidding in this auction, prospective bidders agree to be bound by and comply with the following Terms & Conditions and acknowledge and agree that they are being allowed to participate at this auction in reliance of such agreement. 1. Thank You For Participating In This Online Auction. 2. REGISTRATION. Bidders must be registered with: www.bidspotter.com and approved for bidding by auctioneer. By registering you represent and warrant that any and all Buyer information is correct. Auctioneer reserves the right to deny any registered bidder at any time at its sole discretion without notification. 3. INSPECTIONS: Bidders may inspect the offering on Thursday, June 11 from 10:00 AM to 3:00 PM. You may only be able to inspect the offering during this time period. 4. AS-IS WHERE-IS SALE. ALL SALES ARE FINAL, ON AN "AS IS WHERE IS", "IN PLACE" "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, ORAL ANNOUNCEMENT OR OTHERWISE. 5. DESCRIPTIONS. THE AUCTION CATALOGUE IS MERELY A GUIDE. DESCRIPTIONS HAVE BEEN PREPARED IN GOOD FAITH FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY, GENUINENESS, AUTHENTICITY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. IN ADDITION, AUCTIONEER RESERVES THE RIGHT TO ADD, ALTER, OR REMOVE ANY ITEM(S) TO OR FROM THE AUCTION AT ANY TIME. 6. PAYMENT IN FULL – WITHIN 2 BUSINESS DAYS. Invoices for payment of full amount owed will be issued promptly after the auction. All invoiced amounts must be paid in full no later than the second business day after auction, TIME IS OF-THE -ESSENCE with respect to such date. NOTHING SHALL BE REMOVED FROM THE PREMISES UNLESS AND UNTIL A BIDDER HAS PAID ALL OF ITS INVOICES IN FULL. REMOVAL SHALL TAKE PLACE AFTER THE COURT COMFIRMS THE SALE WHICH IS EXPECTED TO BE JUNE 23rd. 7. FORM OF PAYMENT. No personal or business checks will be accepted unless pre-approved by Auctioneer. Only cash, cashier's checks, wire transfer, pre-approved business checks and credit cards (up to $500) will be accepted. 8. CREDIT CARD FEE. Payments by way of Credit Card will ONLY be accepted for purchases and deposits which do not exceed $500, subject to Auctioneer's discretion. An administration fee of 5% shall apply to credit card purchases. 9. REMOVAL TIMES TO BE SET BY AUCTIONEER. 10. REMOVAL MUST BE DONE IN A COMMERCIALLY REASONABLE MANNER. All successful bidders and/or their agents must sign a Waiver & Release prior to any dismantling or removal which must be done in a commercially reasonable fashion. For vehicle removal –please see Special Notice below. 11. REMOVAL AT BIDDERS COST AND EXPENSE. All items must be removed by the successful bidder at their own cost and expense. There is no material handling equipment, tools or labor available at the auction site - all successful bidders must supply their own. After the time frame set forth on Auctioneer schedule of move-out dates, the Auctioneer will no longer be responsible. Please be forewarned that in the case of a default, the auction company reserves the right to resell any and all unclaimed items and the defaulting bidder will not only forfeit his deposit but bear the responsibility of any shortfall in case of resale, and also all costs and expenses associated with the default as well as all auctioneer's fees and commissions. 12. ALL BIDS ARE FINAL. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke their bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 13. BUYER'S PREMIUM. An eighteen percent (18%) buyer's premium is in effect for all successful bidders at this auction. 14. TAXES. There is no sales tax charged for this auction. 15. AUCTIONEER FINAL ARBITER. The Auctioneer is the final judge in case of a dispute. Any announcement made by the auctioneer at the time of the auction will take precedence over any previously printed materials, including the ability to reject any and all unreasonable bids, entertain a bulk bid, mini bulk bid, and or alter bidding increments at any time. 16. BIDDER PARTICIPATION. All bidders must be at least 21 years of age. The auctioneer reserves the right to deny admission to the auction to any person the auctioneer deems to be abusive, disorderly, intoxicated or non-compliant with the terms and conditions for the auction, or a potential threat to be such. The auctioneer also reserves the right to deny registration to any online bidder who does not qualify to bid. *Please Note: The Auctioneer does not pack, ship, store, crate or rig items. Buyers may either pick up their items at the designated auction site personally or can arrange for a third-party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must contract with an independent logistics firm or other representative who will dismantle, crate, pack, load and/or ship your purchased items; coordinate the removal of those purchased items to meet the time deadlines indicated of this auction and authorize the auction company to release items to a third-party contractor for shipping, crating or packing purposes. Since the auction company does not ship the items, we do not obtain/prepare any export licenses/documents. Further, the auction company is not affiliated with any machinery rigging, transport or export company. We provide the names and contact information of available companies solely as a courtesy to our buyers. The auction company does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage, omission or other problems incurred as a result of the actions of those companies. SPECIAL NOTICE FOR VEHICLE PURCHASES: Vehicles and their contents will be sold "AS IS, WHERE IS," with no warranties, either expressed or implied, including, but not limited to, any warranty of use or merchantability. Buyer agrees that all vehicles are being offered "With All Faults." All bidders, including Buyer, are responsible for inspecting vehicles prior to bidding and each bidder represents that it has done so and is being allowed to bid at this auction in reliance upon such representation. Neither Auctioneer nor Seller shall be responsible for any printed errors or omissions in regard to year, make, model or mileage of vehicles or any other defects. The successful bidder must register the vehicle with the state Motor Vehicle Department after purchasing it and assumes full responsibility and costs for affecting the transfer and ownership registration. Seller warrants and covenants that it has title to, and is the true and legal owner of the vehicles being auctioned herein (subject to express exception below); that all vehicles are free from any liens unless otherwise indicated; and that Seller has the power and authority to sell and transfer title to any vehicle, subject to Court approval. In coordination with Auctioneer, bidders are responsible for vehicle transportation/removal of the vehicles from the auction site. Individuals must be at least 21 years old in order to bid on any vehicle. Do not bid on any vehicle unless you understand all the rules of this auction. By bidding, you are acknowledging and agreeing to comply with all the terms of the auction. If you are a winning bidder, you will provide us with a valid address. The original title will be mailed to you via guaranteed mail. Vehicle pick-ups must be made on the posted removal times or by contacting the Auctioneer and making an appointment. Your auction receipt will serve as your bill of sale. PRIOR TO BEING ALLOWED TO REMOVE ANY VEHICLES, THE WINNING BIDDER MUST HAVE TENDERED FULL PAYMENT FOR THE VEHICLES AND PRESENTED VALID PROOF OF INSURANCE TO DRIVE THE PURCHASED VEHICLE.
Listing Information
Court Ordered Auction. Liquidation of engineering and fabricator of pipe supports and miscellaneous metals. In Re: Assignment for the Benefit of Creditors of J Blanco Associates, Inc. Lots include 2012 Peddinghaus Ocean Avenger CNC Beam Drilling Line, Scotchman 120 Ton 5-Station Dual Operator Ironworker, Free Standing Bridge Crane System, Rejuvinator Drill Sharpener, Mig Welders, Plasma Cutters, Large Selection of Tools, Drills, Grinders, Saws, Crown LPG Forklift, RAM Promaster, Ford Truck, GMC Flatbed.

1
2018 Ram Pro Master 1500 Cargo Van
2018 Ram Pro Master 1500 low roof 3 door cargo van VIN: 3C6TRVAGXJE110856; 29,347 miles indicated on odometer w/automatic transmission, w/ backup camera, V-6 gasoline engine. *Please note that there is currently a lien of $27,634. In the event the hi...

2
2013 Ford Pick-up truck, 4 door crew cab
2013 Ford F150 XLT 4 door crew cab pick-up truck VIN 1FTFW1EF9DKE66144; 131,034 miles indicated on odometer w / automatic transmission, w/ 5 ol V-8 4V flex fuel gasoline engine w/ 4 wheel drive; w/ Tonno Pro Hardford Tonneau cover w/ backup camera; w...

3
2006 GMC Truck - Flat bed, L5000 diesel engine
2006 GMC Truck - w/ flatbed - VIN J8DE5B16167900507; Digital odometer (mileage not visible) w/ automatic transmission; w/ 5.2L inline 4 cyclinder L5000 diesel engine w/ 20'-o steel flatbed body; 42"high steel bulkhead w/ powerlift gate.

4
2018 Crown Forklift truck - model C-5 1050-60 LPG
2018 Crown model C-5 1050-60 LPG forklift truck s/n 10121439, 181.3 hours indicated on meter 4,572 lb. capacity, 180 3 stage lift height. *Please note that there is currently a lien of $32,055. In the event the high bid is less than this amount, we w...

5
MEBA Horizontal Bandsaw - Metall-Bandsagemaschinem
MEBA Band Saw - Metall-Bandsagemaschinem GMBH model 320GHSS Horizontal Bandsaw, s/n 17764 (2007) -

6
Jet - Bandsaw - 7" x 12"horizontal / vertical
Bandsaw - Jet model HVBS-7MW (414459), 7'' x 12" horizontal/vertical s/n 150848547 (2015)

7
Drilling Line - Ocean Avenger by Peddinghaus - 46'
Drilling line - Ocean Avenger by Peddinghaus model MDL 1000-B CNC Beam207 s/n (302012) w/ 72"wide x 46'-o long fixed table, w/ single spindle horizontal traveling column design w/ Siemens Sinumerik CNC control

8
Husky - Air compressor - 80 gallon vert. tank
Air Compressor - Husky Pro model TF291203AJ s/n L6/22/12-00053, w/ 7.5 HR motor/ w 80 gallon vertical tank, Custom double I-beam welding stand, 37 1/2'wide x 185"long, w / dual I-beam stand w/ Wilton S" vice, w/ assorted electrical ext. cords.

9
Welding Stand - Double I-beam, Custom, 185"long
Custom double I-beam welding stand, 37 1/2'wide x 185"long, w / dual I-beam stand w/ Wilton S" vise, w/ assorted electrical ext. cords,

10
Air System Axial Fan - 1/3 H.P., w/ stand and duct
Air Systems Axial Fan, s/n FA-5450, 1/3 H.P. w/ pedestal stand, w/ flexible duct

11
Oxygen/acetylene welding outfit w/ cart, hose, etc
Oxygen/acetylene welding outfit w/ Anthony cart, hose, Torch, and gages

12
Morse - metal cutting saw - Metal Devil 14"
Morse model CSM14MB Metal Devil 14" metal cutting saw - s/n 50326-1536-23434

13
Morse - metal cutting saw - Metal Devil 14"
Morse model CSM14MB Metal Devil 14" metal cutting saws, s/n 50326-1605-24235

14
Sentry Air Systems Fume extractor - portable
Sentry Air Systems model SS-500-PYTD-MP1dual portable Fume extractor, s/n 20957-E

15
Jetmodel bench drill press w/ drilling vise, stand
Jetmodel JDP-15M (354165) bench drill press, s/n 11071640, large table and base, w/ drilling vise. w/ custom stand

16
Scotchman Dual Operator Ironworker w/ punch & dies
Scotchman 120/200 model DO 120-24M Dual Operator Hydraulic Ironworker, s/n 1185Mo307, (2007), 120 ton 10 H.P. w/ approx 100 assorted punches & dies varies sizes and shapes - ranging from 1/4 round to 1 by 2 inch slots.

17
Bolton gear head metal bench lathe w 3-jaw chuck
Bolton Tools model CQ9332A gear head metal bench lathe s/n 9332-18-06-09, 12" x 24", w 3-jaw chuck, tool holder, tail stock

18
Miller arc welding power source, CP-300 DC
Miller CP-300 DC arc welding power source, s/n JJ471455 (300 amps)

19
Husky Pro air compressor, 60 gallon, w/ 3.2 H.P.
Husky Pro model VH631400AJ air compressor w/ 3.2 H.P. motor, 60 gallons

20
Stihl concrete cut-off demo saw, w/ gas can
Stihl TS350 gas concrete cut-off demo saw with gas can

21
Miller Maxstar 150S stick welder w/ case
Miller Maxstar 150S stick welder w/ case

22
Ocean Machinery Rejuvenator Drill & tool grinder
Ocean Machinery / Rush Machinery model Rejuvenator Drill and tool grinder, s/n R1077 (11-2011)

23
Hougen magnetic base drill press - model 10904
Hougen model 10904 magnetic base drill press

24
ESAB Plasma cutter w/ cart, model PCM-875
ESAB model PCM-875 Plasma cutter s/n PH-Jo48031 w/ cart

25
Baileigh welding positioner - WP-450, 13"diameter
Baileigh model WP-450 welding positioner s/n KJ - 220-1601-B015 (01-2016), 13"diameter

26
Ladders - 12'-o fiberglass, 3 step Aluminum, 4'-o
Ladder - 12'-o fiberglass ladder; 3 step aluminum ladder; 4' -o wood step ladder

27
Bridge Crane System - free standing - 42 ft span
Free Standing Bridge Crane system, w/ 2- Dearborn Overhead Crane single girder top running overhead bridge cranes, each ~42'-o span, 3 ton capacity each w/ R&M 3 ton electric cable hoist. w/ pendant control, w/ 100'-o long free stand runway and bus

28
Makita grinder - 7" angle, 15 amp, model GA7021
Makita model GA7021, 7'' angle grinder, 15 amp, s/n 197578A

30
AFF Body and Frame Repair Kit - 10 Ton w/ case
AFF model 815C body and frame repair kit, 10 ton hydraulic hand pump model 815-40, with portable carry case

31
Assorted Drills & bits, grinders, circular saw
Makita 9557PB 4 ½" angle grinder; drill bits - assorted; Skilsaw 2.3 HP circular saw; Milwaukee model 6147-30 4 1/2"grinder; Craftsmans hand drill; 3 assorted electrical extension cords

32
DeWalt - assorted VSR drills and impact - QTY 5
DeWalt model DW235G, ½" VSR drill; DeWalt model DWD115, 3/8"VSR drill; DeWalt model DW252 VSR drywall screwdriver; Dewalt model DW292, 1/2"impact wrenches QTY 2, assorted bits.

33
Ryobi BG612G double end bench grinders - QTY 2
Ryobi BG612G double end bench grinders - QTY 2

34
Metabo GE950 G Plus die grinders QTY 2
Metabo GE950 G Plus die grinders QTY 2

35
Bosch Circular Saw; Ryobi Jigsaw, Dynabrade Belt
Bosch CS10 circular saw, 7 ¼"; Ryobi model JS481LG jigsaw; Dynabrade Abrasive Belt Dynofile II model 40335

36
Makita 9557PB 41/2" angle grinders - QTY 3
Makita 9557PB 41/2" angle grinders - QTY 3

37
Corso Model LT-2B Beam Clamps - 2 ton, QTY 2
Corso Model LT-2B Beam Clamp - 31/2"- 91/2, 2 ton, QTY 2

38
Wrenches - large - Pittsburgh - QTY 10
Wrenches - Pittsburgh - large - QTY 10

39
C-Claps - asst sizes - QTY 70 - SPLIT UP
Assorted C-claps, various sizes (70 ea) - SPLIT UP

43
Awisco 2 door flammable gas cylinder storage cage
Awisco 2 door flammable gas cylinder storage cage 44" wide x 83" high

44
Flammable gas cylinder storage cage 60" x 63"
2 section/ 2 door wire flammable gas cylinder storage cage 60" wide x 63'' high

45
King - hydraulic pallet jack - 5500 lb
King hydraulic pallet jack - 5500 lb, sn: 05063304

46
Steel dollies - custom - heavy duty QTY 5
custom heavy duty steel dollies - Qty 5

47
Forklift fork extensions, 1 pair, 78" long
Forklift fork extensions, 1 pair, 78" long

48
Roller T-stands, adjustable height, QTY 8
Assorted roller T-stands, adjustable height, QTY 8

49
strapping carts w/ tools - assorted - QTY 2
Assorted strapping carts w/ tools - Qty 2

50
Cantilever stock racks - 2 sections
Two (2) sections of single side cantilever stock racks, 6'-o wide x 8'-o high, each w/s srms, 18"long

51
Roller conveyor, 15½" wide x 60" long with base
Roller conveyor, 15½" wide x 60" long w/ base/stand - 2 sections

52
Metal Carts - 2 tier - assorted - QTY 7
Metal Carts - 2 tier - assorted - QTY 7

53
Hand trucks - metal - assorted -QTY 2
Hand trucks - metal - assorted -QTY 2

54
Walter Line-Mate III, sanders - Speed Drums
Walter Line-Mate III 6268C variable speed drum sanders s/n 6824, QTY 2

55
Jetmodel horizontal/vertical handsaw w/ dolly
Jetmodel HVBS-7MW (414459) horizontal/vertical handsaw s/n 060431466 w/ steel dolly

56
Thermal Dynamics Professional, 102 Plasma cutter
Thermal Dynamics Professional model Cutmaster 102 Plasma cutter, s/n MX1216000473 w/ cart

58
Miller Dynasty 350 AC/DC Tig & Stick water cooled
Miller Dynasty 350 AC/DC Tig & Stick water cooled welder s/n MG100057L w/ cart

59
Miller Millermatic 251 Mig wire welder
Miller Millermatic 251 Mig wire welder, s/n LH120977B w/ Millermatic 251 push-pull module, s/n LH050026K w/ cart

61
Kalamazoo combination belt/disc sander
Kalamazoo combination belt/disc sander, 6" wide belt/12" disc sander

62
Craftsman 12" sliding compound miter saw
Craftsman model 137.212390, 12" sliding compound miter saw w/ Laser Trac, s/n RNW4148 (missing blade)

63
Ridgid CM14500 abrasive cut-off saw
Ridgid CM14500 abrasive cut-off saw, s/n XX0714-96552

64
Miller Millermatic 350P Mig welder, w/ cart
Miller Millermatic 350P Mig welder, s/n MH413031N w/ cart

65
Steel work table, heavy duty - ~41" x 48"
Steel work table, heavy duty, ~41" x 48"

66
Metal storage cabinet - 2 door - 72" high
Cabinet - 2 door metal storage cabinet - 5 shelf, shop - 72"high

67
Metal Cabinet - 2 door, 5 shelf, 72" high
Metal Cabinet, 2 door, 5 shelf, 72" high

68
Rack - 5 tier wire rack, 72" high w/ casters
Rack - 5 tier wire rack, 72" high, 48" long. 18" depth w/ casters wheels

69
Bessey Clamps 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamps - 12" sliding arm bar - steel shop floor clamp - SQ-12 2660 lbs - SCG30, 12" x 5.5", heavy duty QTY 6

70
Bessey Clamps 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamp - 12" Sliding Arm Bar Clamp - SQ-12, 2660 lbs SCG30, heavy duty, 12" x 5.5", Steel shop floor clamp, QTY 6

71
Bessey Clamp, 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamp - 12", sliding Arm Bar Clamp - 2660 lbs SCG30, heavy duty, 12"x 5.5", steel shop floor clamp, QTY 6

72
Bessey Clamp, 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamp - 12" sliding arm bar - steel shop floor clamp - SQ-12 2660 lbs - SCG30, 12" x 5.5", heavy duty QTY 6

73
Bessey Clamp, 12" Sliding Arm Bar, 2660 lbs, Qty 4
Bessey - 12", sliding Arm Bar Clamps - 2660 lbs SCG30, heavy duty, 12" x 5.5", steel shop floor clamp, QTY 5

74
Bessey, 12" Sliding Arm Bar Clamps 1320 lbs Qty 6
Bessey - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

75
Bessey, 12" sliding arm bar clamps 1320 lbs Qty 6
Bessey - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

76
Bessey, 12" sliding arm bar clamps 1320 lbs Qty 6
Bessey - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

77
Bessey, 12" sliding arm bar Clamps 1320 lbs Qty 6
Bessey Clamps - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

78
Strong Hand Welding Clamps UM105, 10.5", Qty 5
Strong Hand Sliding Arm Welding Clamps UM105, 10.5"x 5 1/2" regular duty, QTY 5,

79
Bessey Clamp, 40" sliding arm bar, reg. , Qty 1
Bessey Clamp - 40" sliding arm bar, reg duty, QTY 1

80
Clamps, Assorted, C-Clamps, Sliding Arms, QTY 18
QTY 18 Clamps, Assorted, C-Clamps, Slding Arm Bar, Heavy, Medium and Light Duty, 4 x Wilton, 3 x Pony, 2x I inch Hvy, 2 x 1 inch Light duty, Armstrong 1 x 5 inch, Wilton 1 x 4 inch, Bussey Sliding Arm 8 inch, 1 x SQ 12, 1 x 1200-S12 - 18 Clamps

81
C-Clamps - Extra Hvy Dty, Wilton & Armstng, Qty 8
C-Clamps - Hvy Duty - Extra Hvy Duty, 2.5 - 4 inch, Drop Forged Steel, Wilton, Armstrong, and Horgrove QTY 8

82
Peddinghaus Drill Bits - assorted sizes - Qty 15
Peddinghause Drill Bits - assorted sizes - Peddi Twist high speed steel for structural steel, Oil coolant holes - 5 x 15/16 - 11 inch long; 5 x 7/8 -10.5 inch long; 5 x 5/8 - 9 inch long, QTY 15

83
Peddinghaus Drill Bits - Assorted Sizes, Qty 6
Peddinghaus Drill Bits - Assorted Sizes, Peddi Trist high speed steel for structural steel, Oil coolant holes, 2 x 7/8 - 10.5 inch long; 4 x 5/8 - 9 inch long, QTY 6

84
Peddinghaus Drill Bits - assorted sizes - Qty 9
Peddinghaus Drill Bits Heavy Duty - assorted sizes; Peddi Twist High Speed Steel for Structural steel, oil coolant holes, with orange plastic case. 2 x 5/8; 2 x 7/8; 3 x 15/16; 2 x 13/16; with plastic cases. QTY 9

85
Peddinghaus Drill Bit - Large - 1 1/2 inch, Qty 1
Peddinghaus Drill Bit, one size 1 1/2 inch, Heary Duty - Peddi Twist high speed steel for structural steel, oil coolant holes, with plastic case QTY 1

86
Peddinghaus Drill Bit - Large - 40.0 - Qty 1
Peddinghaus Drill Bit, one size, 40.0, Peddi Twist high speed steel for structural steel, oil coolant holes. Size: 40.0 with plastic case. QTY 1

87
Extension Cords - Assorted - diff lenghts Qty 10
Extension Cords - Assorted - various lengths - QTY 10

101
Office - Desks; swivel chairs; file cabinets
Desk - single pedestal formica desk 1- single pedestal formica desk, w/ side return and attached work area; 2 drawer metal file cabinets QTY 3; 5 drawer metal lateral file cabinet; Assorted metal swival arm chairs QTY 3; 1 metal upholstered arm chair

102
Office - Desk, Chair, Cabinets
Desk - single pedestal formica desk w/ side, Chair - upholstered swivel arm chair, Cabinets - 2 door formica storage cabinet, 29" high, Cabinets - 3 drawer metal lateral file cabinet, 4 drawer metal lateral file cabinet, 2 drawer metal lateral file

103
Office - desk, custom table, bookcase, chair
Desk - single pedestal wood desk, 40" x 72" w/ glass top w/ 3 drawer pedestal; Chair - metal upholstered swivel arm chair; Stool - metal upholstered stool; Table, custom double pedestal wood layout table, 37"x 78"; Two (2) wood arm chairs w/ upho

104
Breakroom - Refrig, microwave, coffee maker, cart
Break room - Refrigerator - Kitchen Aid model KSRA25ILSS03, 2 door side by side Refrigerator freezer (08-03); Keurig coffee maker; Toaster oven, Black & Decker; Microwave oven, Magic chef; Wood cart/stand - portable; Water cooler - base holder of 5 g...

105
Conference Room - Conf table, chairs, phone stand
Conference Table - formica top metal conference table, 4'-o wide x 10'-o long; Arm chairs QTY - 7, wood w/upholstered sea and back; Wipe-off board, white; Telephone stand;

106
Office - desk, chair, cabinet, bookcase
Desk - single pedestal formica desk w/ side return; Chair - metal upholstered swivel arm chair; Cabinet - 4 drawer metal lateral file cabinet; Bookcase - formica bookcase, 5 shelf

107
Office - desk, chair, wire rack, file cabinet
Desk - metal 2 section formica top metal desk w/ top shelf; Cabinet - portable 2 drawer pedestal; Chair - metal upholstered swivel arm chair; Wire rack - 6 tier, 72" high

108
Office - table - glass top, wire racks
Wire Racks - QTY 2, 4 shelf wire racks, 78" high w/ casters; Table - glass top table

109
Office - Desk wood top, Cabinet wood
Desk - 2 section wood top metal desk; Cabinet - 4 drawer wood pedestal; Cabinet - 4 drawer metal file cabinet; Chair - metal upholstered swivel arm chair; Wire Racks - QTY 2, 6 tier shelf;

110
Server, Computers, Monitor, D-Link, Firewall,
Dell PowerEdge 840 server w/ Dell LCD monitor; SonicWall TZ100 Firewall; D-Link DES1024D; APC - NS1080 UPS; Computer - Dell Precision T350 computer w/ Envision LCD monitor; H.P. LaserJet 1020 printer; 1Mac 27"Core 15 computer, 4.5 GHz (late 2013); A

111
Telephone System - Toshiba KSU & phones (QTY 11)
Telephones - QTY 11- assorted Toshiba DKT3210-SD, DKT3220-SD & DP5022-SD telephones; KSU - Toshiba Strata KSU.

112
Office - desk, chair, cabinet, 4 drawer cab.
Formica top metal desk w/ top shelf; 1- 4 drawer pedestal - cabinet; metal upholstered swivel arm chair (torn), 2 drawer metal file cabinet; table lable; Hoover upright vacuum; folding chairs QTY 10;

113
Office - 5 desks, chairs, cabinets, bookcases
Formica top metal desks - QTY 5 - multiple (2-4) sections w/ 1- top shelf; 5- portable 2 drawer pedestals; 5 metal uphalstered chairs, 1 metal chair - black; portable 10 arm plan rack; 3 bookcases, 1 mita copier cabinet, 2 drawer metal lateral cabine

114
Computers - iMac 27" - QTY 3; 2 x 3.4 GHZ &1x3.3
iMac 27" Core i7, 3.4 GHz computer (Late 2012); iMac 27" Core is, 3.4 GHZ computer (late 2013); iMac 27"Core is, 3.3 GHz coputer (late 2015);

115
H.P. LaserJet Color M551 printer - Enterprise 500
H.P. LaserJet Color M551 printer - Enterprise 500 - Product #CF082A SN: CNDCG5Y05M

116
LG model 42LS5700, 42" LCD television (2012)
LG model 42LS5700, 42" LCD television (2012) w/ wall mount

117
Sharp model LC60LE640U, 60" LCD television
Sharp model LC60LE640U, 60" LCD television w/ wall mount

118
Kyocera TASKalfa 305 copy machine
Kyocera TASKalfa 305 copy machine

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Nov 26
Mt Vernon, NY



Sponsored Links

Fabricator of Pipe Supports and Metals

AuctionAdvisors

AuctionAdvisors


Contact: Oren Klein
Phone: 973-753-1313
Sale Location
(280 9th Ave) Online Auction
Hawthorne, NJ 07506
Sale Dates and Times
Thursday Jun 11, 2020 Completed
Tuesday Jun 16, 2020 Completed
Sale Terms and Conditions
Terms and Conditions These are the complete Terms and Conditions on which all property is offered for sale, subject to amendments and modifications announced by the Auctioneer at the time of the auction. By bidding in this auction, prospective bidders agree to be bound by and comply with the following Terms & Conditions and acknowledge and agree that they are being allowed to participate at this auction in reliance of such agreement. 1. Thank You For Participating In This Online Auction. 2. REGISTRATION. Bidders must be registered with: www.bidspotter.com and approved for bidding by auctioneer. By registering you represent and warrant that any and all Buyer information is correct. Auctioneer reserves the right to deny any registered bidder at any time at its sole discretion without notification. 3. INSPECTIONS: Bidders may inspect the offering on Thursday, June 11 from 10:00 AM to 3:00 PM. You may only be able to inspect the offering during this time period. 4. AS-IS WHERE-IS SALE. ALL SALES ARE FINAL, ON AN "AS IS WHERE IS", "IN PLACE" "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, ORAL ANNOUNCEMENT OR OTHERWISE. 5. DESCRIPTIONS. THE AUCTION CATALOGUE IS MERELY A GUIDE. DESCRIPTIONS HAVE BEEN PREPARED IN GOOD FAITH FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY, GENUINENESS, AUTHENTICITY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. IN ADDITION, AUCTIONEER RESERVES THE RIGHT TO ADD, ALTER, OR REMOVE ANY ITEM(S) TO OR FROM THE AUCTION AT ANY TIME. 6. PAYMENT IN FULL – WITHIN 2 BUSINESS DAYS. Invoices for payment of full amount owed will be issued promptly after the auction. All invoiced amounts must be paid in full no later than the second business day after auction, TIME IS OF-THE -ESSENCE with respect to such date. NOTHING SHALL BE REMOVED FROM THE PREMISES UNLESS AND UNTIL A BIDDER HAS PAID ALL OF ITS INVOICES IN FULL. REMOVAL SHALL TAKE PLACE AFTER THE COURT COMFIRMS THE SALE WHICH IS EXPECTED TO BE JUNE 23rd. 7. FORM OF PAYMENT. No personal or business checks will be accepted unless pre-approved by Auctioneer. Only cash, cashier's checks, wire transfer, pre-approved business checks and credit cards (up to $500) will be accepted. 8. CREDIT CARD FEE. Payments by way of Credit Card will ONLY be accepted for purchases and deposits which do not exceed $500, subject to Auctioneer's discretion. An administration fee of 5% shall apply to credit card purchases. 9. REMOVAL TIMES TO BE SET BY AUCTIONEER. 10. REMOVAL MUST BE DONE IN A COMMERCIALLY REASONABLE MANNER. All successful bidders and/or their agents must sign a Waiver & Release prior to any dismantling or removal which must be done in a commercially reasonable fashion. For vehicle removal –please see Special Notice below. 11. REMOVAL AT BIDDERS COST AND EXPENSE. All items must be removed by the successful bidder at their own cost and expense. There is no material handling equipment, tools or labor available at the auction site - all successful bidders must supply their own. After the time frame set forth on Auctioneer schedule of move-out dates, the Auctioneer will no longer be responsible. Please be forewarned that in the case of a default, the auction company reserves the right to resell any and all unclaimed items and the defaulting bidder will not only forfeit his deposit but bear the responsibility of any shortfall in case of resale, and also all costs and expenses associated with the default as well as all auctioneer's fees and commissions. 12. ALL BIDS ARE FINAL. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke their bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 13. BUYER'S PREMIUM. An eighteen percent (18%) buyer's premium is in effect for all successful bidders at this auction. 14. TAXES. There is no sales tax charged for this auction. 15. AUCTIONEER FINAL ARBITER. The Auctioneer is the final judge in case of a dispute. Any announcement made by the auctioneer at the time of the auction will take precedence over any previously printed materials, including the ability to reject any and all unreasonable bids, entertain a bulk bid, mini bulk bid, and or alter bidding increments at any time. 16. BIDDER PARTICIPATION. All bidders must be at least 21 years of age. The auctioneer reserves the right to deny admission to the auction to any person the auctioneer deems to be abusive, disorderly, intoxicated or non-compliant with the terms and conditions for the auction, or a potential threat to be such. The auctioneer also reserves the right to deny registration to any online bidder who does not qualify to bid. *Please Note: The Auctioneer does not pack, ship, store, crate or rig items. Buyers may either pick up their items at the designated auction site personally or can arrange for a third-party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must contract with an independent logistics firm or other representative who will dismantle, crate, pack, load and/or ship your purchased items; coordinate the removal of those purchased items to meet the time deadlines indicated of this auction and authorize the auction company to release items to a third-party contractor for shipping, crating or packing purposes. Since the auction company does not ship the items, we do not obtain/prepare any export licenses/documents. Further, the auction company is not affiliated with any machinery rigging, transport or export company. We provide the names and contact information of available companies solely as a courtesy to our buyers. The auction company does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage, omission or other problems incurred as a result of the actions of those companies. SPECIAL NOTICE FOR VEHICLE PURCHASES: Vehicles and their contents will be sold "AS IS, WHERE IS," with no warranties, either expressed or implied, including, but not limited to, any warranty of use or merchantability. Buyer agrees that all vehicles are being offered "With All Faults." All bidders, including Buyer, are responsible for inspecting vehicles prior to bidding and each bidder represents that it has done so and is being allowed to bid at this auction in reliance upon such representation. Neither Auctioneer nor Seller shall be responsible for any printed errors or omissions in regard to year, make, model or mileage of vehicles or any other defects. The successful bidder must register the vehicle with the state Motor Vehicle Department after purchasing it and assumes full responsibility and costs for affecting the transfer and ownership registration. Seller warrants and covenants that it has title to, and is the true and legal owner of the vehicles being auctioned herein (subject to express exception below); that all vehicles are free from any liens unless otherwise indicated; and that Seller has the power and authority to sell and transfer title to any vehicle, subject to Court approval. In coordination with Auctioneer, bidders are responsible for vehicle transportation/removal of the vehicles from the auction site. Individuals must be at least 21 years old in order to bid on any vehicle. Do not bid on any vehicle unless you understand all the rules of this auction. By bidding, you are acknowledging and agreeing to comply with all the terms of the auction. If you are a winning bidder, you will provide us with a valid address. The original title will be mailed to you via guaranteed mail. Vehicle pick-ups must be made on the posted removal times or by contacting the Auctioneer and making an appointment. Your auction receipt will serve as your bill of sale. PRIOR TO BEING ALLOWED TO REMOVE ANY VEHICLES, THE WINNING BIDDER MUST HAVE TENDERED FULL PAYMENT FOR THE VEHICLES AND PRESENTED VALID PROOF OF INSURANCE TO DRIVE THE PURCHASED VEHICLE.
Listing Details
Court Ordered Auction. Liquidation of engineering and fabricator of pipe supports and miscellaneous metals. In Re: Assignment for the Benefit of Creditors of J Blanco Associates, Inc. Lots include 2012 Peddinghaus Ocean Avenger CNC Beam Drilling Line, Scotchman 120 Ton 5-Station Dual Operator Ironworker, Free Standing Bridge Crane System, Rejuvinator Drill Sharpener, Mig Welders, Plasma Cutters, Large Selection of Tools, Drills, Grinders, Saws, Crown LPG Forklift, RAM Promaster, Ford Truck, GMC Flatbed.

1
2018 Ram Pro Master 1500 Cargo Van
2018 Ram Pro Master 1500 low roof 3 door cargo van VIN: 3C6TRVAGXJE110856; 29,347 miles indicated on odometer w/automatic transmission, w/ backup camera, V-6 gasoline engine. *Please note that there is currently a lien of $27,634. In the event the hi...

2
2013 Ford Pick-up truck, 4 door crew cab
2013 Ford F150 XLT 4 door crew cab pick-up truck VIN 1FTFW1EF9DKE66144; 131,034 miles indicated on odometer w / automatic transmission, w/ 5 ol V-8 4V flex fuel gasoline engine w/ 4 wheel drive; w/ Tonno Pro Hardford Tonneau cover w/ backup camera; w...

3
2006 GMC Truck - Flat bed, L5000 diesel engine
2006 GMC Truck - w/ flatbed - VIN J8DE5B16167900507; Digital odometer (mileage not visible) w/ automatic transmission; w/ 5.2L inline 4 cyclinder L5000 diesel engine w/ 20'-o steel flatbed body; 42"high steel bulkhead w/ powerlift gate.

4
2018 Crown Forklift truck - model C-5 1050-60 LPG
2018 Crown model C-5 1050-60 LPG forklift truck s/n 10121439, 181.3 hours indicated on meter 4,572 lb. capacity, 180 3 stage lift height. *Please note that there is currently a lien of $32,055. In the event the high bid is less than this amount, we w...

5
MEBA Horizontal Bandsaw - Metall-Bandsagemaschinem
MEBA Band Saw - Metall-Bandsagemaschinem GMBH model 320GHSS Horizontal Bandsaw, s/n 17764 (2007) -

6
Jet - Bandsaw - 7" x 12"horizontal / vertical
Bandsaw - Jet model HVBS-7MW (414459), 7'' x 12" horizontal/vertical s/n 150848547 (2015)

7
Drilling Line - Ocean Avenger by Peddinghaus - 46'
Drilling line - Ocean Avenger by Peddinghaus model MDL 1000-B CNC Beam207 s/n (302012) w/ 72"wide x 46'-o long fixed table, w/ single spindle horizontal traveling column design w/ Siemens Sinumerik CNC control

8
Husky - Air compressor - 80 gallon vert. tank
Air Compressor - Husky Pro model TF291203AJ s/n L6/22/12-00053, w/ 7.5 HR motor/ w 80 gallon vertical tank, Custom double I-beam welding stand, 37 1/2'wide x 185"long, w / dual I-beam stand w/ Wilton S" vice, w/ assorted electrical ext. cords.

9
Welding Stand - Double I-beam, Custom, 185"long
Custom double I-beam welding stand, 37 1/2'wide x 185"long, w / dual I-beam stand w/ Wilton S" vise, w/ assorted electrical ext. cords,

10
Air System Axial Fan - 1/3 H.P., w/ stand and duct
Air Systems Axial Fan, s/n FA-5450, 1/3 H.P. w/ pedestal stand, w/ flexible duct

11
Oxygen/acetylene welding outfit w/ cart, hose, etc
Oxygen/acetylene welding outfit w/ Anthony cart, hose, Torch, and gages

12
Morse - metal cutting saw - Metal Devil 14"
Morse model CSM14MB Metal Devil 14" metal cutting saw - s/n 50326-1536-23434

13
Morse - metal cutting saw - Metal Devil 14"
Morse model CSM14MB Metal Devil 14" metal cutting saws, s/n 50326-1605-24235

14
Sentry Air Systems Fume extractor - portable
Sentry Air Systems model SS-500-PYTD-MP1dual portable Fume extractor, s/n 20957-E

15
Jetmodel bench drill press w/ drilling vise, stand
Jetmodel JDP-15M (354165) bench drill press, s/n 11071640, large table and base, w/ drilling vise. w/ custom stand

16
Scotchman Dual Operator Ironworker w/ punch & dies
Scotchman 120/200 model DO 120-24M Dual Operator Hydraulic Ironworker, s/n 1185Mo307, (2007), 120 ton 10 H.P. w/ approx 100 assorted punches & dies varies sizes and shapes - ranging from 1/4 round to 1 by 2 inch slots.

17
Bolton gear head metal bench lathe w 3-jaw chuck
Bolton Tools model CQ9332A gear head metal bench lathe s/n 9332-18-06-09, 12" x 24", w 3-jaw chuck, tool holder, tail stock

18
Miller arc welding power source, CP-300 DC
Miller CP-300 DC arc welding power source, s/n JJ471455 (300 amps)

19
Husky Pro air compressor, 60 gallon, w/ 3.2 H.P.
Husky Pro model VH631400AJ air compressor w/ 3.2 H.P. motor, 60 gallons

20
Stihl concrete cut-off demo saw, w/ gas can
Stihl TS350 gas concrete cut-off demo saw with gas can

21
Miller Maxstar 150S stick welder w/ case
Miller Maxstar 150S stick welder w/ case

22
Ocean Machinery Rejuvenator Drill & tool grinder
Ocean Machinery / Rush Machinery model Rejuvenator Drill and tool grinder, s/n R1077 (11-2011)

23
Hougen magnetic base drill press - model 10904
Hougen model 10904 magnetic base drill press

24
ESAB Plasma cutter w/ cart, model PCM-875
ESAB model PCM-875 Plasma cutter s/n PH-Jo48031 w/ cart

25
Baileigh welding positioner - WP-450, 13"diameter
Baileigh model WP-450 welding positioner s/n KJ - 220-1601-B015 (01-2016), 13"diameter

26
Ladders - 12'-o fiberglass, 3 step Aluminum, 4'-o
Ladder - 12'-o fiberglass ladder; 3 step aluminum ladder; 4' -o wood step ladder

27
Bridge Crane System - free standing - 42 ft span
Free Standing Bridge Crane system, w/ 2- Dearborn Overhead Crane single girder top running overhead bridge cranes, each ~42'-o span, 3 ton capacity each w/ R&M 3 ton electric cable hoist. w/ pendant control, w/ 100'-o long free stand runway and bus

28
Makita grinder - 7" angle, 15 amp, model GA7021
Makita model GA7021, 7'' angle grinder, 15 amp, s/n 197578A

30
AFF Body and Frame Repair Kit - 10 Ton w/ case
AFF model 815C body and frame repair kit, 10 ton hydraulic hand pump model 815-40, with portable carry case

31
Assorted Drills & bits, grinders, circular saw
Makita 9557PB 4 ½" angle grinder; drill bits - assorted; Skilsaw 2.3 HP circular saw; Milwaukee model 6147-30 4 1/2"grinder; Craftsmans hand drill; 3 assorted electrical extension cords

32
DeWalt - assorted VSR drills and impact - QTY 5
DeWalt model DW235G, ½" VSR drill; DeWalt model DWD115, 3/8"VSR drill; DeWalt model DW252 VSR drywall screwdriver; Dewalt model DW292, 1/2"impact wrenches QTY 2, assorted bits.

33
Ryobi BG612G double end bench grinders - QTY 2
Ryobi BG612G double end bench grinders - QTY 2

34
Metabo GE950 G Plus die grinders QTY 2
Metabo GE950 G Plus die grinders QTY 2

35
Bosch Circular Saw; Ryobi Jigsaw, Dynabrade Belt
Bosch CS10 circular saw, 7 ¼"; Ryobi model JS481LG jigsaw; Dynabrade Abrasive Belt Dynofile II model 40335

36
Makita 9557PB 41/2" angle grinders - QTY 3
Makita 9557PB 41/2" angle grinders - QTY 3

37
Corso Model LT-2B Beam Clamps - 2 ton, QTY 2
Corso Model LT-2B Beam Clamp - 31/2"- 91/2, 2 ton, QTY 2

38
Wrenches - large - Pittsburgh - QTY 10
Wrenches - Pittsburgh - large - QTY 10

39
C-Claps - asst sizes - QTY 70 - SPLIT UP
Assorted C-claps, various sizes (70 ea) - SPLIT UP

43
Awisco 2 door flammable gas cylinder storage cage
Awisco 2 door flammable gas cylinder storage cage 44" wide x 83" high

44
Flammable gas cylinder storage cage 60" x 63"
2 section/ 2 door wire flammable gas cylinder storage cage 60" wide x 63'' high

45
King - hydraulic pallet jack - 5500 lb
King hydraulic pallet jack - 5500 lb, sn: 05063304

46
Steel dollies - custom - heavy duty QTY 5
custom heavy duty steel dollies - Qty 5

47
Forklift fork extensions, 1 pair, 78" long
Forklift fork extensions, 1 pair, 78" long

48
Roller T-stands, adjustable height, QTY 8
Assorted roller T-stands, adjustable height, QTY 8

49
strapping carts w/ tools - assorted - QTY 2
Assorted strapping carts w/ tools - Qty 2

50
Cantilever stock racks - 2 sections
Two (2) sections of single side cantilever stock racks, 6'-o wide x 8'-o high, each w/s srms, 18"long

51
Roller conveyor, 15½" wide x 60" long with base
Roller conveyor, 15½" wide x 60" long w/ base/stand - 2 sections

52
Metal Carts - 2 tier - assorted - QTY 7
Metal Carts - 2 tier - assorted - QTY 7

53
Hand trucks - metal - assorted -QTY 2
Hand trucks - metal - assorted -QTY 2

54
Walter Line-Mate III, sanders - Speed Drums
Walter Line-Mate III 6268C variable speed drum sanders s/n 6824, QTY 2

55
Jetmodel horizontal/vertical handsaw w/ dolly
Jetmodel HVBS-7MW (414459) horizontal/vertical handsaw s/n 060431466 w/ steel dolly

56
Thermal Dynamics Professional, 102 Plasma cutter
Thermal Dynamics Professional model Cutmaster 102 Plasma cutter, s/n MX1216000473 w/ cart

58
Miller Dynasty 350 AC/DC Tig & Stick water cooled
Miller Dynasty 350 AC/DC Tig & Stick water cooled welder s/n MG100057L w/ cart

59
Miller Millermatic 251 Mig wire welder
Miller Millermatic 251 Mig wire welder, s/n LH120977B w/ Millermatic 251 push-pull module, s/n LH050026K w/ cart

61
Kalamazoo combination belt/disc sander
Kalamazoo combination belt/disc sander, 6" wide belt/12" disc sander

62
Craftsman 12" sliding compound miter saw
Craftsman model 137.212390, 12" sliding compound miter saw w/ Laser Trac, s/n RNW4148 (missing blade)

63
Ridgid CM14500 abrasive cut-off saw
Ridgid CM14500 abrasive cut-off saw, s/n XX0714-96552

64
Miller Millermatic 350P Mig welder, w/ cart
Miller Millermatic 350P Mig welder, s/n MH413031N w/ cart

65
Steel work table, heavy duty - ~41" x 48"
Steel work table, heavy duty, ~41" x 48"

66
Metal storage cabinet - 2 door - 72" high
Cabinet - 2 door metal storage cabinet - 5 shelf, shop - 72"high

67
Metal Cabinet - 2 door, 5 shelf, 72" high
Metal Cabinet, 2 door, 5 shelf, 72" high

68
Rack - 5 tier wire rack, 72" high w/ casters
Rack - 5 tier wire rack, 72" high, 48" long. 18" depth w/ casters wheels

69
Bessey Clamps 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamps - 12" sliding arm bar - steel shop floor clamp - SQ-12 2660 lbs - SCG30, 12" x 5.5", heavy duty QTY 6

70
Bessey Clamps 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamp - 12" Sliding Arm Bar Clamp - SQ-12, 2660 lbs SCG30, heavy duty, 12" x 5.5", Steel shop floor clamp, QTY 6

71
Bessey Clamp, 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamp - 12", sliding Arm Bar Clamp - 2660 lbs SCG30, heavy duty, 12"x 5.5", steel shop floor clamp, QTY 6

72
Bessey Clamp, 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamp - 12" sliding arm bar - steel shop floor clamp - SQ-12 2660 lbs - SCG30, 12" x 5.5", heavy duty QTY 6

73
Bessey Clamp, 12" Sliding Arm Bar, 2660 lbs, Qty 4
Bessey - 12", sliding Arm Bar Clamps - 2660 lbs SCG30, heavy duty, 12" x 5.5", steel shop floor clamp, QTY 5

74
Bessey, 12" Sliding Arm Bar Clamps 1320 lbs Qty 6
Bessey - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

75
Bessey, 12" sliding arm bar clamps 1320 lbs Qty 6
Bessey - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

76
Bessey, 12" sliding arm bar clamps 1320 lbs Qty 6
Bessey - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

77
Bessey, 12" sliding arm bar Clamps 1320 lbs Qty 6
Bessey Clamps - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

78
Strong Hand Welding Clamps UM105, 10.5", Qty 5
Strong Hand Sliding Arm Welding Clamps UM105, 10.5"x 5 1/2" regular duty, QTY 5,

79
Bessey Clamp, 40" sliding arm bar, reg. , Qty 1
Bessey Clamp - 40" sliding arm bar, reg duty, QTY 1

80
Clamps, Assorted, C-Clamps, Sliding Arms, QTY 18
QTY 18 Clamps, Assorted, C-Clamps, Slding Arm Bar, Heavy, Medium and Light Duty, 4 x Wilton, 3 x Pony, 2x I inch Hvy, 2 x 1 inch Light duty, Armstrong 1 x 5 inch, Wilton 1 x 4 inch, Bussey Sliding Arm 8 inch, 1 x SQ 12, 1 x 1200-S12 - 18 Clamps

81
C-Clamps - Extra Hvy Dty, Wilton & Armstng, Qty 8
C-Clamps - Hvy Duty - Extra Hvy Duty, 2.5 - 4 inch, Drop Forged Steel, Wilton, Armstrong, and Horgrove QTY 8

82
Peddinghaus Drill Bits - assorted sizes - Qty 15
Peddinghause Drill Bits - assorted sizes - Peddi Twist high speed steel for structural steel, Oil coolant holes - 5 x 15/16 - 11 inch long; 5 x 7/8 -10.5 inch long; 5 x 5/8 - 9 inch long, QTY 15

83
Peddinghaus Drill Bits - Assorted Sizes, Qty 6
Peddinghaus Drill Bits - Assorted Sizes, Peddi Trist high speed steel for structural steel, Oil coolant holes, 2 x 7/8 - 10.5 inch long; 4 x 5/8 - 9 inch long, QTY 6

84
Peddinghaus Drill Bits - assorted sizes - Qty 9
Peddinghaus Drill Bits Heavy Duty - assorted sizes; Peddi Twist High Speed Steel for Structural steel, oil coolant holes, with orange plastic case. 2 x 5/8; 2 x 7/8; 3 x 15/16; 2 x 13/16; with plastic cases. QTY 9

85
Peddinghaus Drill Bit - Large - 1 1/2 inch, Qty 1
Peddinghaus Drill Bit, one size 1 1/2 inch, Heary Duty - Peddi Twist high speed steel for structural steel, oil coolant holes, with plastic case QTY 1

86
Peddinghaus Drill Bit - Large - 40.0 - Qty 1
Peddinghaus Drill Bit, one size, 40.0, Peddi Twist high speed steel for structural steel, oil coolant holes. Size: 40.0 with plastic case. QTY 1

87
Extension Cords - Assorted - diff lenghts Qty 10
Extension Cords - Assorted - various lengths - QTY 10

101
Office - Desks; swivel chairs; file cabinets
Desk - single pedestal formica desk 1- single pedestal formica desk, w/ side return and attached work area; 2 drawer metal file cabinets QTY 3; 5 drawer metal lateral file cabinet; Assorted metal swival arm chairs QTY 3; 1 metal upholstered arm chair

102
Office - Desk, Chair, Cabinets
Desk - single pedestal formica desk w/ side, Chair - upholstered swivel arm chair, Cabinets - 2 door formica storage cabinet, 29" high, Cabinets - 3 drawer metal lateral file cabinet, 4 drawer metal lateral file cabinet, 2 drawer metal lateral file

103
Office - desk, custom table, bookcase, chair
Desk - single pedestal wood desk, 40" x 72" w/ glass top w/ 3 drawer pedestal; Chair - metal upholstered swivel arm chair; Stool - metal upholstered stool; Table, custom double pedestal wood layout table, 37"x 78"; Two (2) wood arm chairs w/ upho

104
Breakroom - Refrig, microwave, coffee maker, cart
Break room - Refrigerator - Kitchen Aid model KSRA25ILSS03, 2 door side by side Refrigerator freezer (08-03); Keurig coffee maker; Toaster oven, Black & Decker; Microwave oven, Magic chef; Wood cart/stand - portable; Water cooler - base holder of 5 g...

105
Conference Room - Conf table, chairs, phone stand
Conference Table - formica top metal conference table, 4'-o wide x 10'-o long; Arm chairs QTY - 7, wood w/upholstered sea and back; Wipe-off board, white; Telephone stand;

106
Office - desk, chair, cabinet, bookcase
Desk - single pedestal formica desk w/ side return; Chair - metal upholstered swivel arm chair; Cabinet - 4 drawer metal lateral file cabinet; Bookcase - formica bookcase, 5 shelf

107
Office - desk, chair, wire rack, file cabinet
Desk - metal 2 section formica top metal desk w/ top shelf; Cabinet - portable 2 drawer pedestal; Chair - metal upholstered swivel arm chair; Wire rack - 6 tier, 72" high

108
Office - table - glass top, wire racks
Wire Racks - QTY 2, 4 shelf wire racks, 78" high w/ casters; Table - glass top table

109
Office - Desk wood top, Cabinet wood
Desk - 2 section wood top metal desk; Cabinet - 4 drawer wood pedestal; Cabinet - 4 drawer metal file cabinet; Chair - metal upholstered swivel arm chair; Wire Racks - QTY 2, 6 tier shelf;

110
Server, Computers, Monitor, D-Link, Firewall,
Dell PowerEdge 840 server w/ Dell LCD monitor; SonicWall TZ100 Firewall; D-Link DES1024D; APC - NS1080 UPS; Computer - Dell Precision T350 computer w/ Envision LCD monitor; H.P. LaserJet 1020 printer; 1Mac 27"Core 15 computer, 4.5 GHz (late 2013); A

111
Telephone System - Toshiba KSU & phones (QTY 11)
Telephones - QTY 11- assorted Toshiba DKT3210-SD, DKT3220-SD & DP5022-SD telephones; KSU - Toshiba Strata KSU.

112
Office - desk, chair, cabinet, 4 drawer cab.
Formica top metal desk w/ top shelf; 1- 4 drawer pedestal - cabinet; metal upholstered swivel arm chair (torn), 2 drawer metal file cabinet; table lable; Hoover upright vacuum; folding chairs QTY 10;

113
Office - 5 desks, chairs, cabinets, bookcases
Formica top metal desks - QTY 5 - multiple (2-4) sections w/ 1- top shelf; 5- portable 2 drawer pedestals; 5 metal uphalstered chairs, 1 metal chair - black; portable 10 arm plan rack; 3 bookcases, 1 mita copier cabinet, 2 drawer metal lateral cabine

114
Computers - iMac 27" - QTY 3; 2 x 3.4 GHZ &1x3.3
iMac 27" Core i7, 3.4 GHz computer (Late 2012); iMac 27" Core is, 3.4 GHZ computer (late 2013); iMac 27"Core is, 3.3 GHz coputer (late 2015);

115
H.P. LaserJet Color M551 printer - Enterprise 500
H.P. LaserJet Color M551 printer - Enterprise 500 - Product #CF082A SN: CNDCG5Y05M

116
LG model 42LS5700, 42" LCD television (2012)
LG model 42LS5700, 42" LCD television (2012) w/ wall mount

117
Sharp model LC60LE640U, 60" LCD television
Sharp model LC60LE640U, 60" LCD television w/ wall mount

118
Kyocera TASKalfa 305 copy machine
Kyocera TASKalfa 305 copy machine

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Fabricator of Pipe Supports and Metals
 Live Auction
Auction Date(s)
Thursday Jun 11, 2020 Completed
Tuesday Jun 16, 2020 Completed
Auction Location

Hawthorne, NJ 07506
Company
AuctionAdvisors

Contact: Oren Klein
Phone: 973-753-1313
Website: www.auctionadvisors.com

Listing Terms and Conditions
Terms and Conditions These are the complete Terms and Conditions on which all property is offered for sale, subject to amendments and modifications announced by the Auctioneer at the time of the auction. By bidding in this auction, prospective bidders agree to be bound by and comply with the following Terms & Conditions and acknowledge and agree that they are being allowed to participate at this auction in reliance of such agreement. 1. Thank You For Participating In This Online Auction. 2. REGISTRATION. Bidders must be registered with: www.bidspotter.com and approved for bidding by auctioneer. By registering you represent and warrant that any and all Buyer information is correct. Auctioneer reserves the right to deny any registered bidder at any time at its sole discretion without notification. 3. INSPECTIONS: Bidders may inspect the offering on Thursday, June 11 from 10:00 AM to 3:00 PM. You may only be able to inspect the offering during this time period. 4. AS-IS WHERE-IS SALE. ALL SALES ARE FINAL, ON AN "AS IS WHERE IS", "IN PLACE" "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, ORAL ANNOUNCEMENT OR OTHERWISE. 5. DESCRIPTIONS. THE AUCTION CATALOGUE IS MERELY A GUIDE. DESCRIPTIONS HAVE BEEN PREPARED IN GOOD FAITH FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY, GENUINENESS, AUTHENTICITY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. IN ADDITION, AUCTIONEER RESERVES THE RIGHT TO ADD, ALTER, OR REMOVE ANY ITEM(S) TO OR FROM THE AUCTION AT ANY TIME. 6. PAYMENT IN FULL – WITHIN 2 BUSINESS DAYS. Invoices for payment of full amount owed will be issued promptly after the auction. All invoiced amounts must be paid in full no later than the second business day after auction, TIME IS OF-THE -ESSENCE with respect to such date. NOTHING SHALL BE REMOVED FROM THE PREMISES UNLESS AND UNTIL A BIDDER HAS PAID ALL OF ITS INVOICES IN FULL. REMOVAL SHALL TAKE PLACE AFTER THE COURT COMFIRMS THE SALE WHICH IS EXPECTED TO BE JUNE 23rd. 7. FORM OF PAYMENT. No personal or business checks will be accepted unless pre-approved by Auctioneer. Only cash, cashier's checks, wire transfer, pre-approved business checks and credit cards (up to $500) will be accepted. 8. CREDIT CARD FEE. Payments by way of Credit Card will ONLY be accepted for purchases and deposits which do not exceed $500, subject to Auctioneer's discretion. An administration fee of 5% shall apply to credit card purchases. 9. REMOVAL TIMES TO BE SET BY AUCTIONEER. 10. REMOVAL MUST BE DONE IN A COMMERCIALLY REASONABLE MANNER. All successful bidders and/or their agents must sign a Waiver & Release prior to any dismantling or removal which must be done in a commercially reasonable fashion. For vehicle removal –please see Special Notice below. 11. REMOVAL AT BIDDERS COST AND EXPENSE. All items must be removed by the successful bidder at their own cost and expense. There is no material handling equipment, tools or labor available at the auction site - all successful bidders must supply their own. After the time frame set forth on Auctioneer schedule of move-out dates, the Auctioneer will no longer be responsible. Please be forewarned that in the case of a default, the auction company reserves the right to resell any and all unclaimed items and the defaulting bidder will not only forfeit his deposit but bear the responsibility of any shortfall in case of resale, and also all costs and expenses associated with the default as well as all auctioneer's fees and commissions. 12. ALL BIDS ARE FINAL. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke their bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 13. BUYER'S PREMIUM. An eighteen percent (18%) buyer's premium is in effect for all successful bidders at this auction. 14. TAXES. There is no sales tax charged for this auction. 15. AUCTIONEER FINAL ARBITER. The Auctioneer is the final judge in case of a dispute. Any announcement made by the auctioneer at the time of the auction will take precedence over any previously printed materials, including the ability to reject any and all unreasonable bids, entertain a bulk bid, mini bulk bid, and or alter bidding increments at any time. 16. BIDDER PARTICIPATION. All bidders must be at least 21 years of age. The auctioneer reserves the right to deny admission to the auction to any person the auctioneer deems to be abusive, disorderly, intoxicated or non-compliant with the terms and conditions for the auction, or a potential threat to be such. The auctioneer also reserves the right to deny registration to any online bidder who does not qualify to bid. *Please Note: The Auctioneer does not pack, ship, store, crate or rig items. Buyers may either pick up their items at the designated auction site personally or can arrange for a third-party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must contract with an independent logistics firm or other representative who will dismantle, crate, pack, load and/or ship your purchased items; coordinate the removal of those purchased items to meet the time deadlines indicated of this auction and authorize the auction company to release items to a third-party contractor for shipping, crating or packing purposes. Since the auction company does not ship the items, we do not obtain/prepare any export licenses/documents. Further, the auction company is not affiliated with any machinery rigging, transport or export company. We provide the names and contact information of available companies solely as a courtesy to our buyers. The auction company does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage, omission or other problems incurred as a result of the actions of those companies. SPECIAL NOTICE FOR VEHICLE PURCHASES: Vehicles and their contents will be sold "AS IS, WHERE IS," with no warranties, either expressed or implied, including, but not limited to, any warranty of use or merchantability. Buyer agrees that all vehicles are being offered "With All Faults." All bidders, including Buyer, are responsible for inspecting vehicles prior to bidding and each bidder represents that it has done so and is being allowed to bid at this auction in reliance upon such representation. Neither Auctioneer nor Seller shall be responsible for any printed errors or omissions in regard to year, make, model or mileage of vehicles or any other defects. The successful bidder must register the vehicle with the state Motor Vehicle Department after purchasing it and assumes full responsibility and costs for affecting the transfer and ownership registration. Seller warrants and covenants that it has title to, and is the true and legal owner of the vehicles being auctioned herein (subject to express exception below); that all vehicles are free from any liens unless otherwise indicated; and that Seller has the power and authority to sell and transfer title to any vehicle, subject to Court approval. In coordination with Auctioneer, bidders are responsible for vehicle transportation/removal of the vehicles from the auction site. Individuals must be at least 21 years old in order to bid on any vehicle. Do not bid on any vehicle unless you understand all the rules of this auction. By bidding, you are acknowledging and agreeing to comply with all the terms of the auction. If you are a winning bidder, you will provide us with a valid address. The original title will be mailed to you via guaranteed mail. Vehicle pick-ups must be made on the posted removal times or by contacting the Auctioneer and making an appointment. Your auction receipt will serve as your bill of sale. PRIOR TO BEING ALLOWED TO REMOVE ANY VEHICLES, THE WINNING BIDDER MUST HAVE TENDERED FULL PAYMENT FOR THE VEHICLES AND PRESENTED VALID PROOF OF INSURANCE TO DRIVE THE PURCHASED VEHICLE.
Court Ordered Auction. Liquidation of engineering and fabricator of pipe supports and miscellaneous metals. In Re: Assignment for the Benefit of Creditors of J Blanco Associates, Inc. Lots include 2012 Peddinghaus Ocean Avenger CNC Beam Drilling Line, Scotchman 120 Ton 5-Station Dual Operator Ironworker, Free Standing Bridge Crane System, Rejuvinator Drill Sharpener, Mig Welders, Plasma Cutters, Large Selection of Tools, Drills, Grinders, Saws, Crown LPG Forklift, RAM Promaster, Ford Truck, GMC Flatbed.

1
2018 Ram Pro Master 1500 Cargo Van
2018 Ram Pro Master 1500 low roof 3 door cargo van VIN: 3C6TRVAGXJE110856; 29,347 miles indicated on odometer w/automatic transmission, w/ backup camera, V-6 gasoline engine. *Please note that there is currently a lien of $27,634. In the event the hi...

2
2013 Ford Pick-up truck, 4 door crew cab
2013 Ford F150 XLT 4 door crew cab pick-up truck VIN 1FTFW1EF9DKE66144; 131,034 miles indicated on odometer w / automatic transmission, w/ 5 ol V-8 4V flex fuel gasoline engine w/ 4 wheel drive; w/ Tonno Pro Hardford Tonneau cover w/ backup camera; w...

3
2006 GMC Truck - Flat bed, L5000 diesel engine
2006 GMC Truck - w/ flatbed - VIN J8DE5B16167900507; Digital odometer (mileage not visible) w/ automatic transmission; w/ 5.2L inline 4 cyclinder L5000 diesel engine w/ 20'-o steel flatbed body; 42"high steel bulkhead w/ powerlift gate.

4
2018 Crown Forklift truck - model C-5 1050-60 LPG
2018 Crown model C-5 1050-60 LPG forklift truck s/n 10121439, 181.3 hours indicated on meter 4,572 lb. capacity, 180 3 stage lift height. *Please note that there is currently a lien of $32,055. In the event the high bid is less than this amount, we w...

5
MEBA Horizontal Bandsaw - Metall-Bandsagemaschinem
MEBA Band Saw - Metall-Bandsagemaschinem GMBH model 320GHSS Horizontal Bandsaw, s/n 17764 (2007) -

6
Jet - Bandsaw - 7" x 12"horizontal / vertical
Bandsaw - Jet model HVBS-7MW (414459), 7'' x 12" horizontal/vertical s/n 150848547 (2015)

7
Drilling Line - Ocean Avenger by Peddinghaus - 46'
Drilling line - Ocean Avenger by Peddinghaus model MDL 1000-B CNC Beam207 s/n (302012) w/ 72"wide x 46'-o long fixed table, w/ single spindle horizontal traveling column design w/ Siemens Sinumerik CNC control

8
Husky - Air compressor - 80 gallon vert. tank
Air Compressor - Husky Pro model TF291203AJ s/n L6/22/12-00053, w/ 7.5 HR motor/ w 80 gallon vertical tank, Custom double I-beam welding stand, 37 1/2'wide x 185"long, w / dual I-beam stand w/ Wilton S" vice, w/ assorted electrical ext. cords.

9
Welding Stand - Double I-beam, Custom, 185"long
Custom double I-beam welding stand, 37 1/2'wide x 185"long, w / dual I-beam stand w/ Wilton S" vise, w/ assorted electrical ext. cords,

10
Air System Axial Fan - 1/3 H.P., w/ stand and duct
Air Systems Axial Fan, s/n FA-5450, 1/3 H.P. w/ pedestal stand, w/ flexible duct

11
Oxygen/acetylene welding outfit w/ cart, hose, etc
Oxygen/acetylene welding outfit w/ Anthony cart, hose, Torch, and gages

12
Morse - metal cutting saw - Metal Devil 14"
Morse model CSM14MB Metal Devil 14" metal cutting saw - s/n 50326-1536-23434

13
Morse - metal cutting saw - Metal Devil 14"
Morse model CSM14MB Metal Devil 14" metal cutting saws, s/n 50326-1605-24235

14
Sentry Air Systems Fume extractor - portable
Sentry Air Systems model SS-500-PYTD-MP1dual portable Fume extractor, s/n 20957-E

15
Jetmodel bench drill press w/ drilling vise, stand
Jetmodel JDP-15M (354165) bench drill press, s/n 11071640, large table and base, w/ drilling vise. w/ custom stand

16
Scotchman Dual Operator Ironworker w/ punch & dies
Scotchman 120/200 model DO 120-24M Dual Operator Hydraulic Ironworker, s/n 1185Mo307, (2007), 120 ton 10 H.P. w/ approx 100 assorted punches & dies varies sizes and shapes - ranging from 1/4 round to 1 by 2 inch slots.

17
Bolton gear head metal bench lathe w 3-jaw chuck
Bolton Tools model CQ9332A gear head metal bench lathe s/n 9332-18-06-09, 12" x 24", w 3-jaw chuck, tool holder, tail stock

18
Miller arc welding power source, CP-300 DC
Miller CP-300 DC arc welding power source, s/n JJ471455 (300 amps)

19
Husky Pro air compressor, 60 gallon, w/ 3.2 H.P.
Husky Pro model VH631400AJ air compressor w/ 3.2 H.P. motor, 60 gallons

20
Stihl concrete cut-off demo saw, w/ gas can
Stihl TS350 gas concrete cut-off demo saw with gas can

21
Miller Maxstar 150S stick welder w/ case
Miller Maxstar 150S stick welder w/ case

22
Ocean Machinery Rejuvenator Drill & tool grinder
Ocean Machinery / Rush Machinery model Rejuvenator Drill and tool grinder, s/n R1077 (11-2011)

23
Hougen magnetic base drill press - model 10904
Hougen model 10904 magnetic base drill press

24
ESAB Plasma cutter w/ cart, model PCM-875
ESAB model PCM-875 Plasma cutter s/n PH-Jo48031 w/ cart

25
Baileigh welding positioner - WP-450, 13"diameter
Baileigh model WP-450 welding positioner s/n KJ - 220-1601-B015 (01-2016), 13"diameter

26
Ladders - 12'-o fiberglass, 3 step Aluminum, 4'-o
Ladder - 12'-o fiberglass ladder; 3 step aluminum ladder; 4' -o wood step ladder

27
Bridge Crane System - free standing - 42 ft span
Free Standing Bridge Crane system, w/ 2- Dearborn Overhead Crane single girder top running overhead bridge cranes, each ~42'-o span, 3 ton capacity each w/ R&M 3 ton electric cable hoist. w/ pendant control, w/ 100'-o long free stand runway and bus

28
Makita grinder - 7" angle, 15 amp, model GA7021
Makita model GA7021, 7'' angle grinder, 15 amp, s/n 197578A

30
AFF Body and Frame Repair Kit - 10 Ton w/ case
AFF model 815C body and frame repair kit, 10 ton hydraulic hand pump model 815-40, with portable carry case

31
Assorted Drills & bits, grinders, circular saw
Makita 9557PB 4 ½" angle grinder; drill bits - assorted; Skilsaw 2.3 HP circular saw; Milwaukee model 6147-30 4 1/2"grinder; Craftsmans hand drill; 3 assorted electrical extension cords

32
DeWalt - assorted VSR drills and impact - QTY 5
DeWalt model DW235G, ½" VSR drill; DeWalt model DWD115, 3/8"VSR drill; DeWalt model DW252 VSR drywall screwdriver; Dewalt model DW292, 1/2"impact wrenches QTY 2, assorted bits.

33
Ryobi BG612G double end bench grinders - QTY 2
Ryobi BG612G double end bench grinders - QTY 2

34
Metabo GE950 G Plus die grinders QTY 2
Metabo GE950 G Plus die grinders QTY 2

35
Bosch Circular Saw; Ryobi Jigsaw, Dynabrade Belt
Bosch CS10 circular saw, 7 ¼"; Ryobi model JS481LG jigsaw; Dynabrade Abrasive Belt Dynofile II model 40335

36
Makita 9557PB 41/2" angle grinders - QTY 3
Makita 9557PB 41/2" angle grinders - QTY 3

37
Corso Model LT-2B Beam Clamps - 2 ton, QTY 2
Corso Model LT-2B Beam Clamp - 31/2"- 91/2, 2 ton, QTY 2

38
Wrenches - large - Pittsburgh - QTY 10
Wrenches - Pittsburgh - large - QTY 10

39
C-Claps - asst sizes - QTY 70 - SPLIT UP
Assorted C-claps, various sizes (70 ea) - SPLIT UP

43
Awisco 2 door flammable gas cylinder storage cage
Awisco 2 door flammable gas cylinder storage cage 44" wide x 83" high

44
Flammable gas cylinder storage cage 60" x 63"
2 section/ 2 door wire flammable gas cylinder storage cage 60" wide x 63'' high

45
King - hydraulic pallet jack - 5500 lb
King hydraulic pallet jack - 5500 lb, sn: 05063304

46
Steel dollies - custom - heavy duty QTY 5
custom heavy duty steel dollies - Qty 5

47
Forklift fork extensions, 1 pair, 78" long
Forklift fork extensions, 1 pair, 78" long

48
Roller T-stands, adjustable height, QTY 8
Assorted roller T-stands, adjustable height, QTY 8

49
strapping carts w/ tools - assorted - QTY 2
Assorted strapping carts w/ tools - Qty 2

50
Cantilever stock racks - 2 sections
Two (2) sections of single side cantilever stock racks, 6'-o wide x 8'-o high, each w/s srms, 18"long

51
Roller conveyor, 15½" wide x 60" long with base
Roller conveyor, 15½" wide x 60" long w/ base/stand - 2 sections

52
Metal Carts - 2 tier - assorted - QTY 7
Metal Carts - 2 tier - assorted - QTY 7

53
Hand trucks - metal - assorted -QTY 2
Hand trucks - metal - assorted -QTY 2

54
Walter Line-Mate III, sanders - Speed Drums
Walter Line-Mate III 6268C variable speed drum sanders s/n 6824, QTY 2

55
Jetmodel horizontal/vertical handsaw w/ dolly
Jetmodel HVBS-7MW (414459) horizontal/vertical handsaw s/n 060431466 w/ steel dolly

56
Thermal Dynamics Professional, 102 Plasma cutter
Thermal Dynamics Professional model Cutmaster 102 Plasma cutter, s/n MX1216000473 w/ cart

58
Miller Dynasty 350 AC/DC Tig & Stick water cooled
Miller Dynasty 350 AC/DC Tig & Stick water cooled welder s/n MG100057L w/ cart

59
Miller Millermatic 251 Mig wire welder
Miller Millermatic 251 Mig wire welder, s/n LH120977B w/ Millermatic 251 push-pull module, s/n LH050026K w/ cart

61
Kalamazoo combination belt/disc sander
Kalamazoo combination belt/disc sander, 6" wide belt/12" disc sander

62
Craftsman 12" sliding compound miter saw
Craftsman model 137.212390, 12" sliding compound miter saw w/ Laser Trac, s/n RNW4148 (missing blade)

63
Ridgid CM14500 abrasive cut-off saw
Ridgid CM14500 abrasive cut-off saw, s/n XX0714-96552

64
Miller Millermatic 350P Mig welder, w/ cart
Miller Millermatic 350P Mig welder, s/n MH413031N w/ cart

65
Steel work table, heavy duty - ~41" x 48"
Steel work table, heavy duty, ~41" x 48"

66
Metal storage cabinet - 2 door - 72" high
Cabinet - 2 door metal storage cabinet - 5 shelf, shop - 72"high

67
Metal Cabinet - 2 door, 5 shelf, 72" high
Metal Cabinet, 2 door, 5 shelf, 72" high

68
Rack - 5 tier wire rack, 72" high w/ casters
Rack - 5 tier wire rack, 72" high, 48" long. 18" depth w/ casters wheels

69
Bessey Clamps 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamps - 12" sliding arm bar - steel shop floor clamp - SQ-12 2660 lbs - SCG30, 12" x 5.5", heavy duty QTY 6

70
Bessey Clamps 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamp - 12" Sliding Arm Bar Clamp - SQ-12, 2660 lbs SCG30, heavy duty, 12" x 5.5", Steel shop floor clamp, QTY 6

71
Bessey Clamp, 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamp - 12", sliding Arm Bar Clamp - 2660 lbs SCG30, heavy duty, 12"x 5.5", steel shop floor clamp, QTY 6

72
Bessey Clamp, 12" Sliding Arm Bar, 2660 lbs, Qty 6
Bessey Clamp - 12" sliding arm bar - steel shop floor clamp - SQ-12 2660 lbs - SCG30, 12" x 5.5", heavy duty QTY 6

73
Bessey Clamp, 12" Sliding Arm Bar, 2660 lbs, Qty 4
Bessey - 12", sliding Arm Bar Clamps - 2660 lbs SCG30, heavy duty, 12" x 5.5", steel shop floor clamp, QTY 5

74
Bessey, 12" Sliding Arm Bar Clamps 1320 lbs Qty 6
Bessey - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

75
Bessey, 12" sliding arm bar clamps 1320 lbs Qty 6
Bessey - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

76
Bessey, 12" sliding arm bar clamps 1320 lbs Qty 6
Bessey - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

77
Bessey, 12" sliding arm bar Clamps 1320 lbs Qty 6
Bessey Clamps - 12", sliding Arm Bar Clamps - 1320 lbs regular duty, 1200-S12, 12" x 5.5", steel shop floor clamp, QTY 6

78
Strong Hand Welding Clamps UM105, 10.5", Qty 5
Strong Hand Sliding Arm Welding Clamps UM105, 10.5"x 5 1/2" regular duty, QTY 5,

79
Bessey Clamp, 40" sliding arm bar, reg. , Qty 1
Bessey Clamp - 40" sliding arm bar, reg duty, QTY 1

80
Clamps, Assorted, C-Clamps, Sliding Arms, QTY 18
QTY 18 Clamps, Assorted, C-Clamps, Slding Arm Bar, Heavy, Medium and Light Duty, 4 x Wilton, 3 x Pony, 2x I inch Hvy, 2 x 1 inch Light duty, Armstrong 1 x 5 inch, Wilton 1 x 4 inch, Bussey Sliding Arm 8 inch, 1 x SQ 12, 1 x 1200-S12 - 18 Clamps

81
C-Clamps - Extra Hvy Dty, Wilton & Armstng, Qty 8
C-Clamps - Hvy Duty - Extra Hvy Duty, 2.5 - 4 inch, Drop Forged Steel, Wilton, Armstrong, and Horgrove QTY 8

82
Peddinghaus Drill Bits - assorted sizes - Qty 15
Peddinghause Drill Bits - assorted sizes - Peddi Twist high speed steel for structural steel, Oil coolant holes - 5 x 15/16 - 11 inch long; 5 x 7/8 -10.5 inch long; 5 x 5/8 - 9 inch long, QTY 15

83
Peddinghaus Drill Bits - Assorted Sizes, Qty 6
Peddinghaus Drill Bits - Assorted Sizes, Peddi Trist high speed steel for structural steel, Oil coolant holes, 2 x 7/8 - 10.5 inch long; 4 x 5/8 - 9 inch long, QTY 6

84
Peddinghaus Drill Bits - assorted sizes - Qty 9
Peddinghaus Drill Bits Heavy Duty - assorted sizes; Peddi Twist High Speed Steel for Structural steel, oil coolant holes, with orange plastic case. 2 x 5/8; 2 x 7/8; 3 x 15/16; 2 x 13/16; with plastic cases. QTY 9

85
Peddinghaus Drill Bit - Large - 1 1/2 inch, Qty 1
Peddinghaus Drill Bit, one size 1 1/2 inch, Heary Duty - Peddi Twist high speed steel for structural steel, oil coolant holes, with plastic case QTY 1

86
Peddinghaus Drill Bit - Large - 40.0 - Qty 1
Peddinghaus Drill Bit, one size, 40.0, Peddi Twist high speed steel for structural steel, oil coolant holes. Size: 40.0 with plastic case. QTY 1

87
Extension Cords - Assorted - diff lenghts Qty 10
Extension Cords - Assorted - various lengths - QTY 10

101
Office - Desks; swivel chairs; file cabinets
Desk - single pedestal formica desk 1- single pedestal formica desk, w/ side return and attached work area; 2 drawer metal file cabinets QTY 3; 5 drawer metal lateral file cabinet; Assorted metal swival arm chairs QTY 3; 1 metal upholstered arm chair

102
Office - Desk, Chair, Cabinets
Desk - single pedestal formica desk w/ side, Chair - upholstered swivel arm chair, Cabinets - 2 door formica storage cabinet, 29" high, Cabinets - 3 drawer metal lateral file cabinet, 4 drawer metal lateral file cabinet, 2 drawer metal lateral file

103
Office - desk, custom table, bookcase, chair
Desk - single pedestal wood desk, 40" x 72" w/ glass top w/ 3 drawer pedestal; Chair - metal upholstered swivel arm chair; Stool - metal upholstered stool; Table, custom double pedestal wood layout table, 37"x 78"; Two (2) wood arm chairs w/ upho

104
Breakroom - Refrig, microwave, coffee maker, cart
Break room - Refrigerator - Kitchen Aid model KSRA25ILSS03, 2 door side by side Refrigerator freezer (08-03); Keurig coffee maker; Toaster oven, Black & Decker; Microwave oven, Magic chef; Wood cart/stand - portable; Water cooler - base holder of 5 g...

105
Conference Room - Conf table, chairs, phone stand
Conference Table - formica top metal conference table, 4'-o wide x 10'-o long; Arm chairs QTY - 7, wood w/upholstered sea and back; Wipe-off board, white; Telephone stand;

106
Office - desk, chair, cabinet, bookcase
Desk - single pedestal formica desk w/ side return; Chair - metal upholstered swivel arm chair; Cabinet - 4 drawer metal lateral file cabinet; Bookcase - formica bookcase, 5 shelf

107
Office - desk, chair, wire rack, file cabinet
Desk - metal 2 section formica top metal desk w/ top shelf; Cabinet - portable 2 drawer pedestal; Chair - metal upholstered swivel arm chair; Wire rack - 6 tier, 72" high

108
Office - table - glass top, wire racks
Wire Racks - QTY 2, 4 shelf wire racks, 78" high w/ casters; Table - glass top table

109
Office - Desk wood top, Cabinet wood
Desk - 2 section wood top metal desk; Cabinet - 4 drawer wood pedestal; Cabinet - 4 drawer metal file cabinet; Chair - metal upholstered swivel arm chair; Wire Racks - QTY 2, 6 tier shelf;

110
Server, Computers, Monitor, D-Link, Firewall,
Dell PowerEdge 840 server w/ Dell LCD monitor; SonicWall TZ100 Firewall; D-Link DES1024D; APC - NS1080 UPS; Computer - Dell Precision T350 computer w/ Envision LCD monitor; H.P. LaserJet 1020 printer; 1Mac 27"Core 15 computer, 4.5 GHz (late 2013); A

111
Telephone System - Toshiba KSU & phones (QTY 11)
Telephones - QTY 11- assorted Toshiba DKT3210-SD, DKT3220-SD & DP5022-SD telephones; KSU - Toshiba Strata KSU.

112
Office - desk, chair, cabinet, 4 drawer cab.
Formica top metal desk w/ top shelf; 1- 4 drawer pedestal - cabinet; metal upholstered swivel arm chair (torn), 2 drawer metal file cabinet; table lable; Hoover upright vacuum; folding chairs QTY 10;

113
Office - 5 desks, chairs, cabinets, bookcases
Formica top metal desks - QTY 5 - multiple (2-4) sections w/ 1- top shelf; 5- portable 2 drawer pedestals; 5 metal uphalstered chairs, 1 metal chair - black; portable 10 arm plan rack; 3 bookcases, 1 mita copier cabinet, 2 drawer metal lateral cabine

114
Computers - iMac 27" - QTY 3; 2 x 3.4 GHZ &1x3.3
iMac 27" Core i7, 3.4 GHz computer (Late 2012); iMac 27" Core is, 3.4 GHZ computer (late 2013); iMac 27"Core is, 3.3 GHz coputer (late 2015);

115
H.P. LaserJet Color M551 printer - Enterprise 500
H.P. LaserJet Color M551 printer - Enterprise 500 - Product #CF082A SN: CNDCG5Y05M

116
LG model 42LS5700, 42" LCD television (2012)
LG model 42LS5700, 42" LCD television (2012) w/ wall mount

117
Sharp model LC60LE640U, 60" LCD television
Sharp model LC60LE640U, 60" LCD television w/ wall mount

118
Kyocera TASKalfa 305 copy machine
Kyocera TASKalfa 305 copy machine