RMA Enterprises, Inc.
Previous Page Listing ID#: 192154

Auction Location

Arvonia, VA 23004
Auction Dates and TimesSALE IS COMPLETED
Friday Jun 19, 2020 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Payment in full day of sale. Cash, check, or major credit card. 2% convenience fee for all credit/debit card transactions. All items sell without reserve. 10% buyer's premium applies to all onsite purchases and 13% to all offsite purchases.

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Information
Complete Sawmill and Surplus Logging Related Equipment Auction. Rare Opportunity to Purchase Nice Late Model Equipment at Absolute Auction! Open House Monday - Friday during business hours and Thursday April 30th all day. Live phone and online bidding available! Great opportunity to consign your surplus equipment into cash! Call Jackie Kittrell, Sales Manager, at 931.698.3342. 
Attend this Sale while visiting the Richmond Expo the same weekend.
Complete catalog will be uploaded soon, but here is a list of some of the items that will be in the auction:  Rockwell automation (15) section system w/ 800 AMP supply, Siemens-Allis (14) section system w/ 800 AMP supply,  Siemens-Allis (8) section system
w/ 800 AMP supply, Siemens 800 AMP main electrical entrance, 
Siemens 800 AMP motor control center w/ all variable feed drive controllers, ABB (4) section 1200 AMP main
electrical entrance, Sullair LA-16 75 HP XH screw type
air compressor, MCBI Model H-1505 air dryer, 70' Fairbanks platform scales w/ Avery Weigh Tronics digital readout, 24' x 10' (3) strand transfer deck, 42' x 7' (3) strand sorting chain, 15 1/2 x 12 1/2' transfer table, Morbark 58-60" (6) knife HFTD chipper, spare knives & knife holders for Morbark chipper, 48" x 48" drop feed bottom discharge rotary hog, Nyle 1CP1-L500 dehumidification lumber drying unit, See brightstarauctions.com for much more…
 

0
Catalog Coming Soon
.

00
*INFORMATION LOT
Starting at 9AM on Smalls.  Directly after that we will sell in order
until 1PM ET which is when the rolling stock will be sold... Then picking back up at the last lot left off at after selling the last piece of rolling stock

000
260 Plus or minus acres. lease or sale
*Anyone who is interested in leasing this land or purchasing part of it
can do so.... If they wish to run a mill   Current owner will supply logs
and buy the lumber.  

1
*Container
HD Plastic Container W/ Top

2
*Cable
Cable

3
*LP Tanks
(2) LP Tanks (1) Lot

4
*Air Compressor
Ingersoll-Rand (3) Stage Tank Mount Air Compressor

5
*Lift Forks
Set of 4' Forks for Small Lift

6
*Pallet
Chain, Strapping

7
*Hose
Pallet of Hose

8
*Electrical
Electrical Boxes, GE Small Transformer, Misc. Blue Light Special

9
*Plastic Strapping
(10) Boxes 5/8 x .38 x 1400 lb., 4,000' each, YES that is 40,000 feet in all

10
*Chipper Knives
Chipper Knives & Liner

11
*Chipper Knife Holder
Chipper Knife Holders & Anvils

12
*Misc. Electrical
Misc. Electrical as Marked

13
*Cabinet Contents
Wood Cabinet does not go, Air Line Supplies, Monitors & Big Bolts

14
* Weg Breaker
Weg Breaker In Enclosure

15
*Cylinder
Big Cylinder Probably 36"

16
*Scrap Metal
Components, Rollers, Blue Light Special

17
*Copper Wire
*

18
*Chutes
(1) Chutes as Marked

19
* Hydraulic Pack
Hydraulic Tank W/ 20 HP Motor, No Pump, 48" x 18" x 17" Tank

20
* Conduit
PVC and Galvanized Conduit & Water Pipe

21
*Fire Extinguishers
Includes Ear Plugs, Drop Hitch, Bearings, Bolts, Tool Boxes, Pillow Black Bearings

22
*Acetylene Torch
Torch & Gauges W/ Mask W/ Cart (No Tanks)

23
*Motors
(1) Weg 10/7.5 HP, (1) 3 HP, (2) 1 HP, (1) 2 HP

24
*Strapping & Tools
Crimp & Seal, 5/8 Plastic Strapping

25
*Pallet
Mis. Blue Light Special

26
*Tool Chest
3-1/2 X 1-1/2 X 2 (8) drawer and open top

28
.

29
*Belting
20"W  8"W and Lacing

30
* Belting
36" Wide

31
*Pallet
Roll of CAT 3 Wire, chargers, halogen bulbs, safety gear and Honeywell controls

32
*Extension cords
One Lot with cart

35
*Electrical
hoto Eyes, Fastners Cat 3 Spool of wire 1000'

37
*Pallet of Misc
.

38
*Pallet
Fastners

39
*Pallet of Misc
.

40
*Misc Electrical
.

41
* Box with Contents
.

42
*Tool Chest
.

43
*Metal Cabinet With Bins
Side by side metal cabinet with plastic sorting bins

44
*Electric Air Compressor
Vertical Tank Mount

45
*Jet Hack Saw
Metal Cutting Hack Saw  

46
*Ware Plates
Ware Plates

47
*rigging tools
Chain, binders and hook 

48
*Shop Vac
Elect Shop Vac

50
*Various Mill Chain
Roller Chain, 81 X and C55B

51
*Pallet of Parts
Couplers Sprockets and Sheaves all look new

52
*Pallet of Sprockets
.

53
* Lot of Grinding Wheels
14" X 4" X 1-1/4" for knife grinder or what ever you make them fit

54
*Cart
Cart with contents

55
*Mill Parts
Total Contents of Shelves on wall in air compressor room,
Tailing belt, C55B RT chain  H78 Chain Sprockets
pillow block bearings, new sheave and items too numerous to mention

56
*siemens Electrical
Breakers Entire lot

57
*Toshiba VFD
(1) VFD and (1) Transistor Converter

58
* Motors and pump
Hydraulic pump, electric motor and hydraulic motor

59
*Tool Chest
with tools as shown

100
Log Deck
30’ x 12’ wide log deck w/ stop-n-load, hydraulic motor w/ Tulsa winch drive (no steel supports

101
Log Trough
40'  conveyor w/ 112 flight chain, S-drive construction w/ 7.5 HP motor & red drive w/ replace pulley & sprocket (no support steel)

102
Cambio 5-Ring Debarker
Cambio Type 35 (ring debarker, rebuild, 5-arm) by Woodland Machine, Machine No. 28, includes infeed & outfeed press rolls (no support steel underneath)

102A
Debarker Parts
ring belts & knives

103
Debarker Cab
10' x 12' operator's control cab, (3) glass panel view, lights, climate control, fire extinguisher (no wire or conduit) w/ operator's chair, no controls, Includes steel support

104
PLC Controls
 for debarker w/ industrial intercom & power box, includes ACME circuit breaker panel

105
Catwalk
around debarker including access stairs, including misc. & on ground as marked

106
Hydraulic Power Pack
HPU for debarking system, 20 HP motor w/ pump w/ 4' x 4' x 18" reservoir

107
Debarker System 101- 107 Offered w/ 10% Raise
Entire lots 101-106 tie back Cambio debarking system w/ 10% raise - Does Not Include lot #100, Support Steel lot #112 to sell separate

108
Belt Conveyor
45' x 54" wide new cleated belting w/ closed in bottom return, steel cover except under debarker, Smcyclo drive Crown Tipton motor 5 HP

109
Belt Conveyor
55' x 36" deep well belt conveyor, Smcyclo drive / Crown Tipton 5 HP motor, includes support steel for incline section

110
Log Trough
20' Morbark log trough conveyor behind debarker w/ gear motor drive (kicker section unhooked)

111
Log Trough Conveyor
37'  w/ H- flight log chain, hydraulic kick off, sweep section w/ Falk reduction drive & motor w/ green steel supports only

112
Support Steel As Marked
 beams under debarker, log troughs & log deck including steel under log troughs except green legs under 111

113
Log Deck
28' x 10' W (4) strand HD ,  2" tubular steel frame w/ H-78 chain, nose skid section, stop and load (hydraulic) w/ Tulsa winch drive & motor

114
Chain Log Turner
Mellott Style (1) bearing on top needs bolt, includes hydraulic motor & control value at saw cab

115
Frickco Timber Tiger 4-HB Carriage
15' long w/ controls, includes 45' track, HPU onboard, sawyer controls in saw cab, no cab, no drive

116
Tyrone Berry Carriage Drive
 40 HP 1780 RPM drum, end of track mount w/ pump package & extra large cooler

117
Husk
5' husk frame w/ off bear belt w/ 6' mandrel w/ sheave w/ gear motor

118
Operators Cab
4 1/2' x 6' Cleereman sawyer's cab w/ A/C & lights, insulated, no controls

119
125 HP Motor
Leeson, 1788 RPM 460 V, frame 445T

120
Lot #113-119 Tie Back
Tie Back Lot #'s 113-119 w/ 10% raise

121
Saw Blade
56" F7 inserted tooth saw on mandrel

122
Saw
56" F7 inserted tooth saw on mandrel

123
Slab Dump Conveyor
13' x 24" wide  

124
Cant Tie Catcher
13' 4-cylinder catcher off head saw

125
Rollcase
18' x 30" wide  section #1, (7) 6" x 30" wide rolls, NO DRIVE

126
Rollcase
20' x 24", 8" x 24" (rolls) w/ drive & 81X chain w/ Meadows (4) strand transfer w/ gear motor drive, air bag lift, has electronic eye for stop & lift

127
Sub Structure Steel
All under sawmill including catwalks, tubular support & I-beams support w/ apron plates Not already sold

128
Belt Conveyor Sell after Select Band Mill
Approx. 130' bulk handling System, Inc. Model E-3-B54 deep well conveyor, 16" deep x 54" wide w/ 48" belt w/ very good cleated belting, Smcyclo drive & 5 HP motor

129
Concave Belt Conveyor
36"x 82'  under main sawmill w/ shaft mount  drive & elec motor

130
Hydraulic Power Pack
HPU under saw cab, 15 HP motor

131
Transformer
ACME transformer 25 KVA 240 x 58 volts w/ 100 AMP breaker box

132
400 AMP Entrance
Square D Type 1 400 AMP enclosure, (13) 20 AMP breakers, (2) 50 AMP breakers, (2) 40 AMP breakers, (1) 30 AMP breaker, catalog # NF-466L4C, 3-phase

133
Motor Controls
Cutler Hammer size 3 starter control, Westinghouse size 5 motor control, TCC timer

134
Controller Box
(8) SCEO-3, (1) SC-E4, (1) SC-E25, (1) Siemen Allis ABBCT-AHE, Eaton PLC controllers, motor control & PLC control

135
250 AMP Breaker
Square D  

136
400 AMP Main
Square D main disconnect

137
GE 300- Line Control
 combination motor control push button

138
GE 300- Line Control
 combination motor control push button

139
GE 300- Line Control
 combination motor control push button

140
GE 300- Line Control
combination motor control push button

141
Vibrating Conveyor
20' x 24" Webster Model F3M  size 24/30 9/16 stroke w/ 3 HP drive, 6' dust screen dropout  

142
Box Chain Conveyor
43' w/ added flared trough sides, 12" bottom x 9" deep, plus 13' added flared sides w/ 5 HP mtr  Smcyclo drive

143
Radial Drag Chain
45' x 20" deep round bottom conveyor w/ radius paddle chain w/ 7.5 HP motor w/ reduction drive incline

144
Vibrating Conveyor
Progress 22' x 24" x 10" deep, 30" overall  w/ transition chute

145
Steel Apron Plates
(2) 12' x 4' sections w/ support steel

146
Progress 60" Chipper
 6-knife chipper Smith Sawmill retrofit #134, big throat w/ elbow 

147
500 HP Motor
WEG  1188 RPM electric motor

148
Benshaw Soft Start
size 7 soft start in factory cabinet

149
Morbark Cyclone
 collector

150
BM & M Chip Screen
 7' x 10' chip sizing screen w/ steel structure

151
Tie Lot #146-150
Tie lot # 146-150 back together w/ 10% raise

152
Hanchett Knife Grinder
 size 38 type RA, S/N 126 w/ knife set screw jig

153
Chipper Knives
21 1/2" long chipper knives 38-42

154
Belt Conveyor
29' x 5" over size chip return w/ feed chute w/ 2 HP gear motor drive

155
Belt Conveyor
60' x 24" deep trough, 13" deep, heavy duty steel construction

156
Transfer Deck
40' x 12' (4) strand steel plate w/ C55B RT chain

157
Pendu Barn Sweep
70' x 42" x 10" deep conveyor, good condition, heavy duty construction w/ motor & drive

158
Round Bottom Conveyor
49' x 12" incline  w/ H-78 rounded paddle drag chain, motor & drive

159
Dual Bay Level Load System
45'  w/ chute/bolted supports and steel, 32' auger (1) in each bay

160
Lumber Conveyor
(4) strand w/ 81X chain & attached slide section & lumber stop, gear motor drive

161
Rollcase
17' x 36" wide (6) 6" rolls w/ jump up cylinder

162
Meadows Hercules Edger
 8"  w/ position infeed table, (3) roller chain jump up (hydraulic drive), (5) roll infeed w/ hydraulic drive,  line light cabinet w/ tailing device

163
150 HP Motor
Reliance   1785 RMP frame 445T

164
Catwalk
catwalk & steel support at edger w/ access stairs (2) sets

165
Saws
Approx. (64) 24" Carbide Tip Edger Strobe Saws

166
Electrical
GE 60 AMP disconnect, (3) GE 300 line control w/ (2) 30 AMP disconnects, (1) Square D 30 AMP disconnect

167
Benshaw Soft Start
motor control for edger motor (150 HP or larger)

168
Variable Feed Drive
LS 100, (2) MT-32 PLC controllers & related switch gear

169
400 AMP Safety Switch
GE , 600 VAC MAX HP 350

170
Motor Control
(4) GE Size 0 motor control (combination), (1) GE size 1 motor control (combination), (1) GE size 2 motor control w/ 60 AMP safety switch, GE 15 KVA transformer 120/240V panel

171
Soft Start Motor Control
WEG SSW06 ,,Model SSW06020572257ESZ, 220/575V, S/N 84444, MCG 1D18011 ,

172
Meadows Lumber Sorter
100' (5) bay 

173
Pressure Tank
reserve air 

174
Lumber Cart
8' x 4 1/2' (2) 4' x 4" tubular steel uprights on steel casters

175
Lumber Cart
8' x 4 1/2' (2) 4' x 4" tubular steel uprights, (2) steel uprights, steel casters

176
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

177
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

178
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

179
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

180
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

181
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

182
Lumber Rack
8' x 4 1/2' (2) 3' x 4" uprights, no casters

183
Lumber Rack
8' x 4 1/2" (2) 4' x 4" uprights, one caster

184
Safety Switches
GE (1) 200 AMP, (1) 100 AMP, (4) 30 AMP w/ (1) size 0 NEMA MC

185
Motor Control
GE Nerra size 4  ( was used for debarker 75 HP), GE 200 AMP  s/s

186
Siemens 800 AMP MCC
 used for air compressor, debarker area 10 HP, 20 HP, 7.5 HP, 25 HP

187
Air Compressor
Ingersoll Rand T30 tank  25 HP 3-cyl.  Model 25E, S/N 30T 509 218

188
Sullair LS-10 Air Compressor
 screw type 25 HP, mounted size 3 NEMA starter

189
Turbo Type Air Dryer
Air Tek Model TD-170, S/N 9708, single phase 230V

189A
Grease pump
Pump Master 3  with partial 55 gallon supply of JT-6 HI-TEMP

189B
Sullair LS16
 50 HP Air Compressor 

189C
MCBI air dryer
 MODEL H-1508. S/N DH 101731101

189D
Nyle dehumidification dry kiln
Model ICP1L500. S/N 166779. 3 Phase 460 volts. 2016 new never installed

189E
Skid loader hydraulic cooler
 Looks like Bobcat

189F
Forestry measuring system
Waratah  Model HTH622B S/N 1WA622BXJB0001604. 12/11

189G
Miller welder generator
Trailblazer 275DC DC 11,000 Watt   Professional series. 120/240 Volt

190
Lumber Deck
14' x 13'5" (4) strand   w/ (4) strands of 81X chain, 3 HP electric motor direct couple to Falk reduction drive

191
Select 4221E Bandmill
 6" Double Cut Blades S/N 3N11900 x 48ORS146, air strain, Wein view panel, lever controls, Manual on site w/ machine. Like New

191A
Double Cut Band Blades
18 gauge, New 6" wide 2 boxes times the money. 5 blades ea. box

191B
Select 21' 3" X 6" double cut band blades
18 guage  used. 5 ready to go. 1 may need sharpened

191C
Sawyers Chair
New select band mill  

192
Select Log Deck
LD24- x 6' wide (2) strand w/ 81X chain, factory supports & substructure, dual cylinder hydraulic stop & load log section, hydraulic motor w/ gear reduction drive

192A
Bridge Mat Maker*
Machine to build bridge mats, good condition

193
Motor Controls
In Select Saw Cab Nema size 0, GE 200 AMP  and (2) 30 AMP 

194
2014 Wood-Mizer LT70
 6 x 16', 4,756 hours, mounted on 5th wheel trailer chassis, 30 HP motor, Distribution Control System, computerized setworks, Air Strain

194A
Generac Diesel Generator
30 KW  Detroit Engine..  

195
1996 Wood-Mizer LT40E15
, 14" , VIN# 456B42414TNRF8416 w/ 15 HP motor, Air Strain

196
Wood-Mizer (4) Head Resaw
w/ slat feed through (hydraulic drive), hydraulic press rolls, air strain, 15 HP on each head, S/N MH409503235

197
52" Collector Fan
 w/ 75 HP motor, includes flange on intake & discharge, 18" intake, 24" overall, 16" discharge, 19" overall, blower 20" wide

198
36" Collector Fan
 14" wide, flange on intake, 19" intake, bottom side discharge, 14", sheave motor bracket mount but no motor

199
Chip Blower
36" Morbark single chute w/ 25 HP motor, includes receiving flange, 18' of discharge pipe 12" x 16"

200
Auger Conveyor
Goodman 16' fully enclosed, top center feed or discharge 12" x 30" one end feed or discharge, approx. 24" x 24", approx. 27" deep & 24" wide, 21" auger blade

201
Doodle Paddle Chain
28' doodle chain conveyor (wood bottom), rubber drag paddles, sprocket, no drive

202
Container Load Pusher
35' container push loader to receive forks, 8" tubular steel construction, 6' x 6' push plate

203
Catwalk & Stairs
(1) 18' crossover section (ladder), (1) 19 1/2' crossover section (stairs), (5) sets of various staircases different height

204
Wood-Mizer Off Bear Belt
11', S/N CBT2-430-05160032A1.00, 35" wide cleated belting, no drive

205
Box Belt Conveyor
26' x 36" W x 9" D w/ 34" belt, 5 HP gear motor drive, (1) section small plate bottom cut out (dropout material?) steel plate easily weld in to repair if not needed

206
Belt Conveyor
20' x 27" W w/ 22" belt, (1) side has 16" deep steel wall, other side 9' section of 16" steel, shaft mount speed reducer

206A
Roll case
34"x15' with 7"×32"rolls ,no drive , steel plate decking

207
Rollcase W/ Cant Flipper
Approx. 36' long w/ (16) 30" x 7" rolls w/ (4) arm cant flipping section, has a stop, no motor, no drive

208
Spiral Rollcase
18', (3) 24" x 8" smooth rolls, (5) 30" x 8" spiral rolls (13' section), steel plate decking w/ plate stop, (no drive) , Ready to Load!

209
Rollcase
43', w/ (2) arm kick off section, 24" wide x 6" rolls (approx. 14), NO DRIVE, Ready to Load!

210
Gravity Roll
6' x 15" w/ 10" wide x 3 1/2" rolls, steel plate (gravity feed) on legs 3' tall over all, Ready to Load!

211
Gang Edger
48" wide w/ inserted tooth feed rolls, includes frame for laser lights (no lights), hydraulic sets, 50 HP motor, Ready to Load!
Use with lot 228A to reclaim slabs and for tailing device 

212
Meadows #3 Circular Sawmill
96' w/ 3C0065-17 carriage addition, (6) HB carriage PLS 5000 Series setworks, husk frame w/ saw, off bear belt, pantograph, sawyer's cab, 58' - 60' of track w/ end bumpers, carriage drive

213
Pallet of Chain
H-78 chain & (2) rolls 24" x 7"

214
Rotary Knife Hog
48" x 48", each row (4) 12" knives, drop feed bottom discharge w/ sheave & belts, attached hydraulic lift to change knives, feed drop & discharge chutes, 350 HP MJ electric motor 1789 RPM 200 Volts w/ sheave

214A
Scalping screen
Radar 66" wide x 54" long

215
Morbark Chipper
48", (6) knife (big throat), S/N 1114, HFTD w/ sheave

215A
Morbark Chip screen
6 x 6', no cyclone

216
Chipper Mount Frame
w/ motor mount

217
Mellott Chain Type Log Turner
4', mounted on nose skid section, hydraulic motor, no pump package
Will work with the Meadows 6 HB Carriage as well

218
Material Chute
square 18" x 18" w/ angle, 22" straight section angle 4" to 10" w/ clean out door

219
Transfer Frame
15 1/2' x 12 1/2' transfer table, (4) strand w/ wear plates, no sprockets, no chains - Use to build one or add to what you have

220
Lumber Sorting Chain
42' sprocket to sprocket x 7' wide, (3) strand w/ return chain channels, no chain drive sprocket, no motor, no drive, has mount area

221
Vulcanized Belting
54" wide roll of V-cleated belting

222
Vulcanized Belting
54" wide roll of V-cleated belting

801
2002 Tigercat 726B
Wheel Feller Bunchers, ser#7261274, 5600 Head, 30.5 Tires, Good Running Machine

223
Lumber Transfer/Sorting Chain
30' (3) strand, 9 1/2' wide, 100 roller chain, 5 HP motor & reduction drive, 10" tubular steel

223A
Lumber or Log Transfer Deck
11 ft x 13 ft, (4) strand w/ (3) strands of H78 mill chain, drive sprocket, no drive

224
Pit Type Unscrambler
(2) strand w/ H-78 welded lug chain, (2) attached single skate roll sections w/ gear motor drive, HP unknown

224A
Transfer deck
16-1\2' x 9' (4) strand W/ 2' angle section, 29" steel plate slide. Drive sprocket and drive chain, no drive or conveyor chain.

224B
Spiked rolls
(2) lots, Quantity 12

224C
Saws
54" inserted tooth  no shanks or bits. Plus 4 edger carbide tip strobe saws. 24"

225
Debarker Center Conveyor
approx. 20' long (spring centering section w/ (1) hourglass roll H ? Flighted chain / s-drive construction, drive sprocket, no motor, no drive

225B
Meadows 30' cut off saw
W/ 30 HP motor. Good condition to cut cants , ties and more.

226
Log Trough
22' x 1" B x 33" top & 40" overall on I-beam steel legs w/ cross bracing, drive sprocket, no drive

227
72" Slasher Saw Section (Swing Type)
w/ electric motor (probably 50-75 HP), Ready to Load!

228
HMC HT 10 20' Trimmer
double end, 30" saws cuts 10" material, S/N 285-92, good condition, will cut thick material, auto push button sets

228A
*Slab saw tailing device
Dual tailing w/ H-78 chain  horizontal saw works 
great behind Lot 211

228D
Swing type cut off saw
with complete saw frame 30" carbide tip saw

229
Platform Trailer Dump
25' long x 13', cylinders & steel structure w/ 60 HP hydraulic power pack (1775 RPM) 230/960V 154/77 AMP, 8 months ago hydraulic reservoir clean-out complete w/ cylinders (includes vase structural steel & catwalk), Ready to Load!

229A
Steel racks
5' x 3-1/2', 2 ea. 1 x money

230
Steel
19' section, Use for what you need!

231
Steel Box Frame
18' x 24" W x 12" deep w/ welded steel pipes under for support & belt travel, no drive, no sprocket

232
Metal Detector
MDI style, 4' x 45" aperture

819
LB01 1984 Trail King Lowboy
Connect Type, Good Working Con

233
Cant Flipper
7' arm on 18' frame, cylinder mount in place (no cylinder)

820

234
(3) Log Sweeps
15', 39" radius (part), HD air cylinder

235
Conveyor
13' 8" high volume section steel construction uses up to 54" wide belt w/ steel plate belt return under

236
(2) Roll Section
(rubber strip insert rolls), looks like head shaft for HD concave belt conveyor, huge shaft mount reduction drive, 44" wide x 20" roll

237
Jump Up Transfer
4' 10" (3) strand w/ 78 chain, drive sprocket & cylinder position, Everybody Wants One!, has stop section & Ready to Load!, 10' W 14' W overall

238
Transfer or Cant Destacking Deck
(2) strand, 9' from sprocket to sprocket w/ hump on each strand to destack packages (will cut off easily), no chain

239
800 AMP Motor Control Center
Rockwell automation (15) section system w/ 800 AMP supply, (5) sections total, (1) 30 HP, (5) 15 HP, (4) 7.5 HP, includes PLC section w/ disconnect, AB Powerflex VFD w/ braking system

240
800 Amp Variable Feed Drive
Siemens

241
Siemens Allis 800 AMP Motor Control Center
(1) HP, 5 HP, 10 HP w/ disconnect

242
Siemens Allis PLC Control Center
.

243
ABB 800 AMP Switch Gear
(4) Section

244
Westinghouse Switch Gear
.

245
Variable Feed Drives
at least (9) Toshiba G7 

246
2400 V Ground Detection
.

247
Foley Sharpener
Model 357 s/n 33972

248
Foley Sharpener
model 357 s/n 33209

249
Snap-On Tool Chest
78" tool chest

250
Sharpener
Blue, no model or s/n

251
McDonough Sharpener
S/N BDM-189

252
Hammering Block
5'x14"  Band saw Hammering Block
 

252a
Hammering Block
5'x14"  Band saw Hammering Block
 

252b
Hammering Block
5'x14"  Band saw Hammering Block
 

253
Armstrong Filing Clamp
#58-B

254
Stretcher Roll
Hanchett Stretcher Roll ready to load

255
Armstrong Sharpener
#6011

256
Hanchett Sharpener
A-240 R.H. Shop #464

257
Hanchett Sharpener
A-230 R.H.#821

258
Hanchett Sharpener *
A-230 R.H. #759, one side piece broken during unloading. Should be easy fix

259
Log Trough and Chain
19'

260
Fulghum Chipper
Side discharge, 200hp, 60" 6-blade, F1-F11-1183 10513 700

261
Cook Edger
Model 36E2TD, #45, 50hp electric motor, 6"x36", 2 moveable blades, 9' in-feed rolls

262
3-Strand Green Chain
Rooftop chain, 11'x12'

263
Waste Conveyor
40'x24" Ladder back chain, drive and electric motor

264
5-Strand Green Chain
12'x15' w/5" sides, rollers w/gear box

265
3-Strand Green Chain *
120' has a few bent strands and one that needs a weld at the splice. Otherwise in excellent condition.

266
3-Strand Green Chain
Rooftop chain, 10'x10', drive and electric motor

267
Belt Conveyor
16"x28', motor and drive

268
Rollcase
6'x19' w/drive and motor

269
Spiral Rollcase
42"x22'

270
Mellott Vibrating Conveyor
20'

271
Mellott Vibrating Conveyor
20' w/chipper chute and 4' magnet

272
Rollcase
18"x22', Live, motor and drive

273
Rollcase
36"x23', Live

274
3-Head Block Salem Carriage
Air dogs, electric set works

275
Prentice Knuckleboom
Needs new pin in boom

276
Lots of Electric Motors
.

277
Lots of Ladderback chain
approximately 200'

278
Hour Glass Rollcase
36"x19', drive and motor

279
Log Kicker
11' wide, hydraulic

280
3-Strand Green Chain
11'x8', Rooftop chain, drive and motor

281
Waste Conveyor
22"x16', Ladder back chain

282
3-Strand Transfer Deck
10'6"x6', Has 2 roof top chains

283
Rollcase
12"x22', Live, w/drive and motor

284
Rollcase
6'x22', Live

285
Mellott Vibrating Conveyor
24', w/chipper chute

286
Vibrating Conveyor
24"x23', w/chipper chute

287
Waste Conveyor
24"x30', Ladder back chain

288
Webster Vibrating Conveyor
23'

289
Rollcase
36"x19', Live, w/air pop up deck, roof top chain

290
Corley Rollcase
36"x14', Live, air kick up, w/kicker and line bar

291
Tyrone Berry Carriage Drive
Hydraulic unit, w/cooler unit & 100hp electric motor

292
Electric Panel
.

293
Dead Roll
30"x5', 2 roll

294
Belt Conveyor
42"x10'

295
Lumber Carts
4

296
Lincoln Electric Motor
3-200hp

297
Mellott Vibrating Conveyor
10'

298
Airker Air Filter
Model JL0600-C, s/n 9907

299
Tyrone Berry Carriage Drive
2

300
Hydraulic Tank and Stand
.

301
Tyrone Berry Hydraulic Unit
w/cooler

302
Hydraulic Tank and Motor
.

303
Shop Press
.

304
Air compressor
w/10hp electric motor

305
Fuel Tank
300 gallon, w/electric pump

306
Cincinnati Drill Press
Floor model, w/electric motor

307
Extension Forks
10"x8'

308
5-Strand Green Chain
14'x40', Kicker, drive and motor, roof top chain

309
Waste Conveyor
24"x60', w/drive and motor, ladder back chain

310
Cat Mast
w/forks for dip tank

311
Camel Back Green Chain
10'x45', w/kicker, several strands were bent during unloading and need repaired. Otherwise in good condition with good chain.

312
Carriage Track
55'

381
*Implement

313
Hydraulic Tank and Motor
.

314
Dip Tank
6'x7'20'

315
Chain Waste Conveyor
20"x105', w/drive and motor

316
Electric Motor
20hp

317
Electric Motor
5hp

318
Electric Motor
7.5hp

319
Electric Motor
5hp

320
Electric Motor
5hp

321
Electric Motor
10hp

322
Electric Motor
10hp

323
Electric Motor
3hp

324
Electric Motor
200hp

325
Electric Motor
200hp

326
Electric Motor
100hp

327
Electric Motor
10hp

328
Electric Motor
15hp

329
Electric Motor
25hp

330
Electric Motor
10hp

331
Electric Motor
10hp

332
Electric Motor
10hp

333
Electric Motor
10hp

334
Electric Motor
5hp

335
Electric Motor
10hp

336
Electric Motor
25hp

337
Electric Motor
50hp

338
Electric Motor
50hp

339
Electric Motor
125hp

340
Electric Motor
200hp

341
Jones Reduction Gear Drive
7.5 electric motor

342
Cleveland Reduction Gear Drive
7.5 electric motor

343
Sm Cyclo Gear Drive
w/sprocket

344
Dodge TM Reducer Gear Box
.

345
Cone Drive Gear Box
w/5hp motor

346
Sm Cyclo Gear Box
w/5hp motor

347
Radion Gear Box
.

348
Dodge Gear Box
Size 60

349
Westinghouse Gear Drive
w/5hp electric motor

350
Gear Drive
.

351
Radicon Gear Drive
.

352
Grove Gear Drive
.

353
Nuttall Gear Drive
.

354
Gear Drive
w/10hp electric motor

355
Munce Hydraulic Pump
#4021

356
Hydraulic Unit
w/5hp electric motor

357
Tyrone Hydraulic Unit
w/5hp electric motor

358
Boston Gear Reductor *
with brand new 5 hp leeson motor

359
gear box reductor *
with 5 hp motor

360
motor mount *
with cone drive gear box

361
5 hp motor with speed reducer gear box *
ratio 15 , size 325

362
5 hp motor with speed reducer gear box *
ratio 30, size 325

363
5 hp motor with Hub City gear box *
20/1 ratio

364
5 hp motor with Hub City gear box *
ratio 40/1

365
5 hp Leeson motor with speed reducer *
size 325, ratio 40/1

366
air cylinder *
.

367
bolt bin *
good condition

368
bolt bin *
loaded!

369
2-wheeled cart *
.

370
motor mount *
with hydraulic cylinder and gear box

371
control panel for gang saw *
.

372
control panel for edger *
.

373
cable *
approx. 80 feet

374
waste dumpster *
approx. 8' x 4'

374a
idler rollers *
approximately 5- in good condition

375
* Utility Truck Bed Reading
9' X 8' Untility Truck Bed  Classic II  Compartments out the wazooo

375 aa
pressure washer *
.

376
* Lumber Deck
22' X 10 1/2' wide  4 strand no chain or drive, but has drive sprocket
and drive chain
 

375aa
.

376aa
air tank *
 appears to be in superb condition

377
*Blue Light Special
*(3) steel carts on casters,  8HP motor w/ pump
  (1) Steel 8' X 4' HD rack receives forks  

377aa
new parts *
includes new bearings and much more. Buyer gets entire crate

378
*Log Bunks
4' tall X 7-1/2 insice  4 bunk sections heavy duty  

378aa
roll case *
4-roll, approx. 5' x 12 ' live rollcase with 5 hp motor and drive. Rolls approx. 9" diameter

379
*Scrap Steel
lot of scrap steel and culvert

380
* Farm Wagon
5' X 20' steel frame with pulling harness, receives pin 
no floor   

380A
John Deere Bale Spear*
Brand new

382
*safety racks
(3) headache racks 

383
*fuel tank
Approx 500 Gallon

384
*Tank for Used Oil
*Appoximately 600 gallon

385
*Oil Tank w/ Reel
about 150 gallon tank mounted on platform
with reel and hose and pump  (condition unknown)

386
*Oil Tank w/ Reel
Approx 150 gallons with pump and Reel  
condition unknown   mounted on steel platform
to move 

387
*Tool Box w/ oil tank
6' X 10" deep double door tool box w/ hooks
6' X 28" X 11" Reservoir  

388
*Stainless Steel Tank
4' X 20" X 20" 

389
*Horiz Tank Air Compressor
with 11 HP Honda Engine

390
*Big Fuel Tank
Probably 5000 gallon its a big one  With pump

391
*Morbark Stack Trac
mounted on track with grapple 

392
*Mellott Deck
17' (2) Strand W/ C55B RT Chain, No Drive

393
*Catwalk Grating
(2) 13' x 3' Sections

394
* HD Steel Chute
10' L x 4' Opening Down to 2' x 2' Spout, 8' Deep

395
*8' x 8' x 6' Tank
Portable Non Potable Water Tank W/ Plumbing & Shut Off Valve W/ Reflectors

396
*11R 24.5 Tires
(4) 11R 24.5 Tires on Rims, (2) 11R 22 Tires on Rims

397
*24" Rims
Approx. (8) Rims, 12" Deep

398
* Tires on Rims
11R x 22.5 Fully Mounted, Good Tread

399
*24" Rims
Approx. (8) Rims, 12" Deep

400
*Misc. Tires & Rims
11R x 22.5 Tires Mounted on Rims, (4) Rims without Tires, 12" Deep

450
*(2) Packs of Lumber
5 x 5 x 16' Approx. (27) Pieces, 5/4 x 8 x 16' Approx. (36) Pieces

451
* Lumber - Pine Green Rough
1 x 6 x 16' (1) Pack as Marked (No Cart)

452
* Lumber - Pine Green Rough
1 x 8 x 16' Small Pack (No Cart)

453
*Lumber - Pine Green Rough
1 x 6 x 16' Full Bundle, (2) 12 x 12 x 16'

454
*Lumber - Green Pine
(2) Full Packs on Air Dry Sticks

455
*Pine Timbers Green
.

500
Barko 695M Track Loader
knuckleboom, 20' high rise cab, 52' long arm Rotobec grapple, track machine, S/N 11269523627, 7,831+  hours. VERY NICE! Forest Pro, Inc. Service Records on hand 

500A
2012 John Deere 437D Knuckleboom*
Log Loader, New Rebuild on Engine ( all new cyc, new bearings,all new injectors, filters, oil, water separator) New saw chain, Rebuilt stick boom cyc, Rebulit grapple! Pitts Trailer, Enclosed Cab, Grapple, 12,000 hrs, CSI 264 Delimber, ser#1T0437DXPCC232011,Nice Unit!! Good Working Condition

500B
Prentice 280 Knuckleboom Log Loader*
Enclosed Cab, Grapple, Pitts Trailer, CTR Delimber, ser#D280P57688 8251 hrs, Good Running Condition

500C
CSI FTD6000 Delimber
Pull Thru / Flail Combination Delimber, Good Condition
 

500D
John Deere 437C*
knuckle boom loader mounted on Evans Trailer with bucking saw hydraulic
hook up   14,463 hours  S/N WC437CL013275  Purchased New in
2006

500E
Tigercat Log Grapple*
Grapple fits tigercat skidder

501
Cat 938M Rubber Tire Wheel Loader
VIN CAT0838MAJ3R02555, (no attachments), 20.5R 25 Bridgestone tires, good tread 60%, Excellent Machine, 4,145 hours 3/13/20

502
Cat Bucket
quick couple #00014512

502A
Pemberton Loader Bucket*
SS WCB1611600709, Heavy Duty, 12' wide, 8' high, 70" deep, Good Condition

502B
Loader Bucket*
99" wide, 35 high, Good condition

503
Arrow Forks
Model 739 6250-6-96-112, 20,000 lb. capacity, S/N L-25678, one for mount rod bent to be repaired before sale!

503A
Quick attach Pallet Forks*
5' wide, 48" long forks, Excellent Condition

503B
Pair of forks*
48" long

504
Cat Log Grapple
quick couple log bale # 000013055

505
Volvo L60G Wheel Loader
(no attachments), quick couple machine, Bridgestone 20.5R25 tires (good rubber 60%), VIN VCE0L60GJ05611063, 6,871 hours 3/13/20

506
Pemberton Forks
(Volvo L60 forks) Model 412117, S/N LF10154872104

507
Volvo High Tilt Bucket
.

508
Navigator 5500 Piggy Back Forklift
3-wheel  (Lumber Series) w/ hook mounts, etc., tilt & slide mast w/ side shift, outrigger cylinder 4' forks, no hours showing, 5,500 #, 31X15-50-15 front tires, 31X15.50-15 NHS rear

509
Komatsu FG-30-16 Forklift
triple mast w/ side shift, 2,500 #, LP style gas, S/N A23176

510
Komatsu Forklift
5,000 # , 24,000 hours

510A
2008 International Model 17700
with Wet Kit

510B
#87-2013 Freightliner Truck*
Model Coronado, has approx 625,000 miles, dual exhausts, Headache rack, Aluminum front and rear tires, C15 Cat Engine, empty wt 14,500 GVW 80,000, 230 wheelbase, FRO16210C Transmission, 3:90 Meritor Rear Ratio, Dual fuel Tanks, No Blow By, No oil Leaks, Tire Size Ft & Bk 11R 22.5, Notable Repairs 7/2017 - Mileage 378,450 Engine Rebuilt - Gold Kit! 3/2016 - Mileage 312,739 Installed Eaton Rebuilt Transmission! This Nice Truck is Ready to Roll!

510C
#71 - 2007 Western Star*
Approx 855,000 miles, 14L Detroit Engine, Dual Fual Tanks /20's, FT & BK Aluminum Wheels, 60 sleeper size, Engine Brake, Rear Ratio 3:58, Transmission 13SP, GVW 80,000, Empty WT 16898, Tilt Steering, Cruise Control, Exterior Sunvisor, Air Ride Cab, No Blow By , No Oil Leaks, Notable Repairs 12/2018 - mileage 810,736 replaced All Injectors 12/2017 - mileage 734,269. Good Working Condition!

510D
#60 - 2006 Kenworth T800 Truck*
Has 60" Sleeper, Headache Rack, Approx 1,370,000 on Truck, C15 A Cert Engine, Engine Brake, Tilt Steering, Cruise Control, Exterior Sunvisor, Air Ride Cab, Front & Back Aluminum Wheels, 11R 22.5 Tires, Dual Fuel Tanks/ 20's, Air Slide 5th Wheel, Empty WT 17,500, GVW 80,000, Transmission 10 SP, Rear Ratio 3:55, No Blow By, No Oil Leak, Notable Repairs; 11/2016 - mileagen 1,150,000 - Rebuilt Transmission, 10/2017 - mileage - 1,227,405 Injectors installed By CAT, 4/2019 - Mileage - 1,341,087 - Rebuilt back rear 3:55 Ratio, Good Working Condition!

510E
*1989 Ford LNT8000 Truck, VIN # 1FDYW82AXKVA10641
with log bed/ dual tandem axle, with cab mount knuckle boom 
loader super nice set up  sawing in the woods

510F
Head Ache Rack*
7' x 68" , Aluminum, Excellent Condition

511
Army Truck
operating (forwarder), VIN 05A-89977-C127-10794, inspected property 1971

512
Army Truck
for parts

513
Chevy 70 Fire Truck, V-8
VIN 1GBL7DIE5CV117448, Atlas controls pumping system 1,000 gallon Model Brute II, S/N 0491, 10-00R20 tires 90%

514
2013 Ford F-450 Service Truck
w/ utility bed (running boards), VIN 1F))W4HT8DEA76512 (no tools)

515
Ford Flatbed
yard truck / no headlights, 96,310 mileage meter (no back window), 16' bed w/ 4'4" removable sides, VIN 1FDHF70H8CVA49470

516
ITI Walking Floor Trailer
1996, 45' long, VIN 1Z92F4520TT029134

516A
53' Van Trailer
Year 1990, GVWR 65,000 

517
*Flatbed Manac
45' Legend SD, 2016 Model 10248C001F, Spread Axle, VIN 5MC124816H5164127, Excellent 11R 22.5

518
*Drop Deck Trailer
48' Tri Axle Tandem Wheel, 8.25-15 Tires

519
*Flatbed Fruehauf
45' Model SRGT553SP, VIN FW88400

519A
2007 Great Dane Flatbed
FB7527 - Combo - 48' x 96" Good Working Con

519B
2007 Great Dane Flatbed
FB7599 - Combo - 48' x 96" Good Working Condition

519C
1999 Utility Flatbed
FB20 - Combo - 48 x 102" Good Working Con

519D
LT08 1997 Sun Log Trailer
Good Working Con

519E
LT12 1998 Home Made Log Trailer
Good Working Con

519F
LT14 1998 Home Made Log Trailer
Good Working Con

519G
LT21 1997 Pitts Log Trailer
6 Pin Good Working Con

519H
LT35 2004 Pitts Log Trailer
Good Working Con

519I
LT36 2004 Pitts Log Trailer
Good Working Con

519J
LT37 2004 Pitts Log Trailer
Good Working Con

519K
Log Bunks*
210 " x 96" , 8- removable post, Excellent Condition

520
Woods Mower
PRD8400 84" 3-point finish mower, Like New

521
70' Fairbanks Platform Scales
w/ Avery Weightronics digital readout & electronic main frame, last inspection before removal 3/19, Model 10248C0017, S/N 12481645164127  The controls
and load cells are in the galvanized building on top of the hill.  in a crate.  

522
Hydro-Axe 321 Feller Buncher*
3-Wheel, Shear Head, 28L Tires, 17,745 hrs, Good Running Condition

523
1997 Tigercat 726 Feller Buncher*
ser#7260852, 5700 Head, 8598 hrs, New Center Pin, Good Condition

524
2016 John Deere 848L Log Grapple Skidder*
skidder comes w/winch, machine has total of 5067 hrs, Complete New Engine has Only 1667 hrs on it. Two new 35.5 Primex Tires, Sells with low Reserve!

525
1999 International 4700 T 444E*
Vin 1HTSCABN4YH289365, 243,910 MILES, Tires at 40%, Runs and Drives,

526
Franklin Trailer Mover*
Runs great, Detroit 453 Engine, 1930 hrs,

527
Ford 3910 Tractor*
ss EA87812, Enclosed Cab, Runs good Rear tires at 60%,

800
*Treated Lumber
To Be Broken out in packs as announced Pieces are counted
8X8X18 and 16'
6X8X16'
6X6X16,12"
1X6 X 16', 14', 12', and 10'  
 

810

811

812

814

815

816

817

819

820

821

822

824

825

826

827

828

829

831

833

834

835

836

837

838

839

841

843

844

853

854

855

856
Photo Gallery

Gallery 1 (2000 images)          Gallery 2 (472 images)
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Sponsored Links

RMA Enterprises, Inc.

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
11045 Bridgeport Rd.
Arvonia, VA 23004
Sale Dates and Times
Friday Jun 19, 2020 Completed
Sale Terms and Conditions
Payment in full day of sale. Cash, check, or major credit card. 2% convenience fee for all credit/debit card transactions. All items sell without reserve. 10% buyer's premium applies to all onsite purchases and 13% to all offsite purchases.

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Complete Sawmill and Surplus Logging Related Equipment Auction. Rare Opportunity to Purchase Nice Late Model Equipment at Absolute Auction! Open House Monday - Friday during business hours and Thursday April 30th all day. Live phone and online bidding available! Great opportunity to consign your surplus equipment into cash! Call Jackie Kittrell, Sales Manager, at 931.698.3342. 
Attend this Sale while visiting the Richmond Expo the same weekend.
Complete catalog will be uploaded soon, but here is a list of some of the items that will be in the auction:  Rockwell automation (15) section system w/ 800 AMP supply, Siemens-Allis (14) section system w/ 800 AMP supply,  Siemens-Allis (8) section system
w/ 800 AMP supply, Siemens 800 AMP main electrical entrance, 
Siemens 800 AMP motor control center w/ all variable feed drive controllers, ABB (4) section 1200 AMP main
electrical entrance, Sullair LA-16 75 HP XH screw type
air compressor, MCBI Model H-1505 air dryer, 70' Fairbanks platform scales w/ Avery Weigh Tronics digital readout, 24' x 10' (3) strand transfer deck, 42' x 7' (3) strand sorting chain, 15 1/2 x 12 1/2' transfer table, Morbark 58-60" (6) knife HFTD chipper, spare knives & knife holders for Morbark chipper, 48" x 48" drop feed bottom discharge rotary hog, Nyle 1CP1-L500 dehumidification lumber drying unit, See brightstarauctions.com for much more…
 

0
Catalog Coming Soon
.

00
*INFORMATION LOT
Starting at 9AM on Smalls.  Directly after that we will sell in order
until 1PM ET which is when the rolling stock will be sold... Then picking back up at the last lot left off at after selling the last piece of rolling stock

000
260 Plus or minus acres. lease or sale
*Anyone who is interested in leasing this land or purchasing part of it
can do so.... If they wish to run a mill   Current owner will supply logs
and buy the lumber.  

1
*Container
HD Plastic Container W/ Top

2
*Cable
Cable

3
*LP Tanks
(2) LP Tanks (1) Lot

4
*Air Compressor
Ingersoll-Rand (3) Stage Tank Mount Air Compressor

5
*Lift Forks
Set of 4' Forks for Small Lift

6
*Pallet
Chain, Strapping

7
*Hose
Pallet of Hose

8
*Electrical
Electrical Boxes, GE Small Transformer, Misc. Blue Light Special

9
*Plastic Strapping
(10) Boxes 5/8 x .38 x 1400 lb., 4,000' each, YES that is 40,000 feet in all

10
*Chipper Knives
Chipper Knives & Liner

11
*Chipper Knife Holder
Chipper Knife Holders & Anvils

12
*Misc. Electrical
Misc. Electrical as Marked

13
*Cabinet Contents
Wood Cabinet does not go, Air Line Supplies, Monitors & Big Bolts

14
* Weg Breaker
Weg Breaker In Enclosure

15
*Cylinder
Big Cylinder Probably 36"

16
*Scrap Metal
Components, Rollers, Blue Light Special

17
*Copper Wire
*

18
*Chutes
(1) Chutes as Marked

19
* Hydraulic Pack
Hydraulic Tank W/ 20 HP Motor, No Pump, 48" x 18" x 17" Tank

20
* Conduit
PVC and Galvanized Conduit & Water Pipe

21
*Fire Extinguishers
Includes Ear Plugs, Drop Hitch, Bearings, Bolts, Tool Boxes, Pillow Black Bearings

22
*Acetylene Torch
Torch & Gauges W/ Mask W/ Cart (No Tanks)

23
*Motors
(1) Weg 10/7.5 HP, (1) 3 HP, (2) 1 HP, (1) 2 HP

24
*Strapping & Tools
Crimp & Seal, 5/8 Plastic Strapping

25
*Pallet
Mis. Blue Light Special

26
*Tool Chest
3-1/2 X 1-1/2 X 2 (8) drawer and open top

28
.

29
*Belting
20"W  8"W and Lacing

30
* Belting
36" Wide

31
*Pallet
Roll of CAT 3 Wire, chargers, halogen bulbs, safety gear and Honeywell controls

32
*Extension cords
One Lot with cart

35
*Electrical
hoto Eyes, Fastners Cat 3 Spool of wire 1000'

37
*Pallet of Misc
.

38
*Pallet
Fastners

39
*Pallet of Misc
.

40
*Misc Electrical
.

41
* Box with Contents
.

42
*Tool Chest
.

43
*Metal Cabinet With Bins
Side by side metal cabinet with plastic sorting bins

44
*Electric Air Compressor
Vertical Tank Mount

45
*Jet Hack Saw
Metal Cutting Hack Saw  

46
*Ware Plates
Ware Plates

47
*rigging tools
Chain, binders and hook 

48
*Shop Vac
Elect Shop Vac

50
*Various Mill Chain
Roller Chain, 81 X and C55B

51
*Pallet of Parts
Couplers Sprockets and Sheaves all look new

52
*Pallet of Sprockets
.

53
* Lot of Grinding Wheels
14" X 4" X 1-1/4" for knife grinder or what ever you make them fit

54
*Cart
Cart with contents

55
*Mill Parts
Total Contents of Shelves on wall in air compressor room,
Tailing belt, C55B RT chain  H78 Chain Sprockets
pillow block bearings, new sheave and items too numerous to mention

56
*siemens Electrical
Breakers Entire lot

57
*Toshiba VFD
(1) VFD and (1) Transistor Converter

58
* Motors and pump
Hydraulic pump, electric motor and hydraulic motor

59
*Tool Chest
with tools as shown

100
Log Deck
30’ x 12’ wide log deck w/ stop-n-load, hydraulic motor w/ Tulsa winch drive (no steel supports

101
Log Trough
40'  conveyor w/ 112 flight chain, S-drive construction w/ 7.5 HP motor & red drive w/ replace pulley & sprocket (no support steel)

102
Cambio 5-Ring Debarker
Cambio Type 35 (ring debarker, rebuild, 5-arm) by Woodland Machine, Machine No. 28, includes infeed & outfeed press rolls (no support steel underneath)

102A
Debarker Parts
ring belts & knives

103
Debarker Cab
10' x 12' operator's control cab, (3) glass panel view, lights, climate control, fire extinguisher (no wire or conduit) w/ operator's chair, no controls, Includes steel support

104
PLC Controls
 for debarker w/ industrial intercom & power box, includes ACME circuit breaker panel

105
Catwalk
around debarker including access stairs, including misc. & on ground as marked

106
Hydraulic Power Pack
HPU for debarking system, 20 HP motor w/ pump w/ 4' x 4' x 18" reservoir

107
Debarker System 101- 107 Offered w/ 10% Raise
Entire lots 101-106 tie back Cambio debarking system w/ 10% raise - Does Not Include lot #100, Support Steel lot #112 to sell separate

108
Belt Conveyor
45' x 54" wide new cleated belting w/ closed in bottom return, steel cover except under debarker, Smcyclo drive Crown Tipton motor 5 HP

109
Belt Conveyor
55' x 36" deep well belt conveyor, Smcyclo drive / Crown Tipton 5 HP motor, includes support steel for incline section

110
Log Trough
20' Morbark log trough conveyor behind debarker w/ gear motor drive (kicker section unhooked)

111
Log Trough Conveyor
37'  w/ H- flight log chain, hydraulic kick off, sweep section w/ Falk reduction drive & motor w/ green steel supports only

112
Support Steel As Marked
 beams under debarker, log troughs & log deck including steel under log troughs except green legs under 111

113
Log Deck
28' x 10' W (4) strand HD ,  2" tubular steel frame w/ H-78 chain, nose skid section, stop and load (hydraulic) w/ Tulsa winch drive & motor

114
Chain Log Turner
Mellott Style (1) bearing on top needs bolt, includes hydraulic motor & control value at saw cab

115
Frickco Timber Tiger 4-HB Carriage
15' long w/ controls, includes 45' track, HPU onboard, sawyer controls in saw cab, no cab, no drive

116
Tyrone Berry Carriage Drive
 40 HP 1780 RPM drum, end of track mount w/ pump package & extra large cooler

117
Husk
5' husk frame w/ off bear belt w/ 6' mandrel w/ sheave w/ gear motor

118
Operators Cab
4 1/2' x 6' Cleereman sawyer's cab w/ A/C & lights, insulated, no controls

119
125 HP Motor
Leeson, 1788 RPM 460 V, frame 445T

120
Lot #113-119 Tie Back
Tie Back Lot #'s 113-119 w/ 10% raise

121
Saw Blade
56" F7 inserted tooth saw on mandrel

122
Saw
56" F7 inserted tooth saw on mandrel

123
Slab Dump Conveyor
13' x 24" wide  

124
Cant Tie Catcher
13' 4-cylinder catcher off head saw

125
Rollcase
18' x 30" wide  section #1, (7) 6" x 30" wide rolls, NO DRIVE

126
Rollcase
20' x 24", 8" x 24" (rolls) w/ drive & 81X chain w/ Meadows (4) strand transfer w/ gear motor drive, air bag lift, has electronic eye for stop & lift

127
Sub Structure Steel
All under sawmill including catwalks, tubular support & I-beams support w/ apron plates Not already sold

128
Belt Conveyor Sell after Select Band Mill
Approx. 130' bulk handling System, Inc. Model E-3-B54 deep well conveyor, 16" deep x 54" wide w/ 48" belt w/ very good cleated belting, Smcyclo drive & 5 HP motor

129
Concave Belt Conveyor
36"x 82'  under main sawmill w/ shaft mount  drive & elec motor

130
Hydraulic Power Pack
HPU under saw cab, 15 HP motor

131
Transformer
ACME transformer 25 KVA 240 x 58 volts w/ 100 AMP breaker box

132
400 AMP Entrance
Square D Type 1 400 AMP enclosure, (13) 20 AMP breakers, (2) 50 AMP breakers, (2) 40 AMP breakers, (1) 30 AMP breaker, catalog # NF-466L4C, 3-phase

133
Motor Controls
Cutler Hammer size 3 starter control, Westinghouse size 5 motor control, TCC timer

134
Controller Box
(8) SCEO-3, (1) SC-E4, (1) SC-E25, (1) Siemen Allis ABBCT-AHE, Eaton PLC controllers, motor control & PLC control

135
250 AMP Breaker
Square D  

136
400 AMP Main
Square D main disconnect

137
GE 300- Line Control
 combination motor control push button

138
GE 300- Line Control
 combination motor control push button

139
GE 300- Line Control
 combination motor control push button

140
GE 300- Line Control
combination motor control push button

141
Vibrating Conveyor
20' x 24" Webster Model F3M  size 24/30 9/16 stroke w/ 3 HP drive, 6' dust screen dropout  

142
Box Chain Conveyor
43' w/ added flared trough sides, 12" bottom x 9" deep, plus 13' added flared sides w/ 5 HP mtr  Smcyclo drive

143
Radial Drag Chain
45' x 20" deep round bottom conveyor w/ radius paddle chain w/ 7.5 HP motor w/ reduction drive incline

144
Vibrating Conveyor
Progress 22' x 24" x 10" deep, 30" overall  w/ transition chute

145
Steel Apron Plates
(2) 12' x 4' sections w/ support steel

146
Progress 60" Chipper
 6-knife chipper Smith Sawmill retrofit #134, big throat w/ elbow 

147
500 HP Motor
WEG  1188 RPM electric motor

148
Benshaw Soft Start
size 7 soft start in factory cabinet

149
Morbark Cyclone
 collector

150
BM & M Chip Screen
 7' x 10' chip sizing screen w/ steel structure

151
Tie Lot #146-150
Tie lot # 146-150 back together w/ 10% raise

152
Hanchett Knife Grinder
 size 38 type RA, S/N 126 w/ knife set screw jig

153
Chipper Knives
21 1/2" long chipper knives 38-42

154
Belt Conveyor
29' x 5" over size chip return w/ feed chute w/ 2 HP gear motor drive

155
Belt Conveyor
60' x 24" deep trough, 13" deep, heavy duty steel construction

156
Transfer Deck
40' x 12' (4) strand steel plate w/ C55B RT chain

157
Pendu Barn Sweep
70' x 42" x 10" deep conveyor, good condition, heavy duty construction w/ motor & drive

158
Round Bottom Conveyor
49' x 12" incline  w/ H-78 rounded paddle drag chain, motor & drive

159
Dual Bay Level Load System
45'  w/ chute/bolted supports and steel, 32' auger (1) in each bay

160
Lumber Conveyor
(4) strand w/ 81X chain & attached slide section & lumber stop, gear motor drive

161
Rollcase
17' x 36" wide (6) 6" rolls w/ jump up cylinder

162
Meadows Hercules Edger
 8"  w/ position infeed table, (3) roller chain jump up (hydraulic drive), (5) roll infeed w/ hydraulic drive,  line light cabinet w/ tailing device

163
150 HP Motor
Reliance   1785 RMP frame 445T

164
Catwalk
catwalk & steel support at edger w/ access stairs (2) sets

165
Saws
Approx. (64) 24" Carbide Tip Edger Strobe Saws

166
Electrical
GE 60 AMP disconnect, (3) GE 300 line control w/ (2) 30 AMP disconnects, (1) Square D 30 AMP disconnect

167
Benshaw Soft Start
motor control for edger motor (150 HP or larger)

168
Variable Feed Drive
LS 100, (2) MT-32 PLC controllers & related switch gear

169
400 AMP Safety Switch
GE , 600 VAC MAX HP 350

170
Motor Control
(4) GE Size 0 motor control (combination), (1) GE size 1 motor control (combination), (1) GE size 2 motor control w/ 60 AMP safety switch, GE 15 KVA transformer 120/240V panel

171
Soft Start Motor Control
WEG SSW06 ,,Model SSW06020572257ESZ, 220/575V, S/N 84444, MCG 1D18011 ,

172
Meadows Lumber Sorter
100' (5) bay 

173
Pressure Tank
reserve air 

174
Lumber Cart
8' x 4 1/2' (2) 4' x 4" tubular steel uprights on steel casters

175
Lumber Cart
8' x 4 1/2' (2) 4' x 4" tubular steel uprights, (2) steel uprights, steel casters

176
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

177
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

178
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

179
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

180
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

181
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

182
Lumber Rack
8' x 4 1/2' (2) 3' x 4" uprights, no casters

183
Lumber Rack
8' x 4 1/2" (2) 4' x 4" uprights, one caster

184
Safety Switches
GE (1) 200 AMP, (1) 100 AMP, (4) 30 AMP w/ (1) size 0 NEMA MC

185
Motor Control
GE Nerra size 4  ( was used for debarker 75 HP), GE 200 AMP  s/s

186
Siemens 800 AMP MCC
 used for air compressor, debarker area 10 HP, 20 HP, 7.5 HP, 25 HP

187
Air Compressor
Ingersoll Rand T30 tank  25 HP 3-cyl.  Model 25E, S/N 30T 509 218

188
Sullair LS-10 Air Compressor
 screw type 25 HP, mounted size 3 NEMA starter

189
Turbo Type Air Dryer
Air Tek Model TD-170, S/N 9708, single phase 230V

189A
Grease pump
Pump Master 3  with partial 55 gallon supply of JT-6 HI-TEMP

189B
Sullair LS16
 50 HP Air Compressor 

189C
MCBI air dryer
 MODEL H-1508. S/N DH 101731101

189D
Nyle dehumidification dry kiln
Model ICP1L500. S/N 166779. 3 Phase 460 volts. 2016 new never installed

189E
Skid loader hydraulic cooler
 Looks like Bobcat

189F
Forestry measuring system
Waratah  Model HTH622B S/N 1WA622BXJB0001604. 12/11

189G
Miller welder generator
Trailblazer 275DC DC 11,000 Watt   Professional series. 120/240 Volt

190
Lumber Deck
14' x 13'5" (4) strand   w/ (4) strands of 81X chain, 3 HP electric motor direct couple to Falk reduction drive

191
Select 4221E Bandmill
 6" Double Cut Blades S/N 3N11900 x 48ORS146, air strain, Wein view panel, lever controls, Manual on site w/ machine. Like New

191A
Double Cut Band Blades
18 gauge, New 6" wide 2 boxes times the money. 5 blades ea. box

191B
Select 21' 3" X 6" double cut band blades
18 guage  used. 5 ready to go. 1 may need sharpened

191C
Sawyers Chair
New select band mill  

192
Select Log Deck
LD24- x 6' wide (2) strand w/ 81X chain, factory supports & substructure, dual cylinder hydraulic stop & load log section, hydraulic motor w/ gear reduction drive

192A
Bridge Mat Maker*
Machine to build bridge mats, good condition

193
Motor Controls
In Select Saw Cab Nema size 0, GE 200 AMP  and (2) 30 AMP 

194
2014 Wood-Mizer LT70
 6 x 16', 4,756 hours, mounted on 5th wheel trailer chassis, 30 HP motor, Distribution Control System, computerized setworks, Air Strain

194A
Generac Diesel Generator
30 KW  Detroit Engine..  

195
1996 Wood-Mizer LT40E15
, 14" , VIN# 456B42414TNRF8416 w/ 15 HP motor, Air Strain

196
Wood-Mizer (4) Head Resaw
w/ slat feed through (hydraulic drive), hydraulic press rolls, air strain, 15 HP on each head, S/N MH409503235

197
52" Collector Fan
 w/ 75 HP motor, includes flange on intake & discharge, 18" intake, 24" overall, 16" discharge, 19" overall, blower 20" wide

198
36" Collector Fan
 14" wide, flange on intake, 19" intake, bottom side discharge, 14", sheave motor bracket mount but no motor

199
Chip Blower
36" Morbark single chute w/ 25 HP motor, includes receiving flange, 18' of discharge pipe 12" x 16"

200
Auger Conveyor
Goodman 16' fully enclosed, top center feed or discharge 12" x 30" one end feed or discharge, approx. 24" x 24", approx. 27" deep & 24" wide, 21" auger blade

201
Doodle Paddle Chain
28' doodle chain conveyor (wood bottom), rubber drag paddles, sprocket, no drive

202
Container Load Pusher
35' container push loader to receive forks, 8" tubular steel construction, 6' x 6' push plate

203
Catwalk & Stairs
(1) 18' crossover section (ladder), (1) 19 1/2' crossover section (stairs), (5) sets of various staircases different height

204
Wood-Mizer Off Bear Belt
11', S/N CBT2-430-05160032A1.00, 35" wide cleated belting, no drive

205
Box Belt Conveyor
26' x 36" W x 9" D w/ 34" belt, 5 HP gear motor drive, (1) section small plate bottom cut out (dropout material?) steel plate easily weld in to repair if not needed

206
Belt Conveyor
20' x 27" W w/ 22" belt, (1) side has 16" deep steel wall, other side 9' section of 16" steel, shaft mount speed reducer

206A
Roll case
34"x15' with 7"×32"rolls ,no drive , steel plate decking

207
Rollcase W/ Cant Flipper
Approx. 36' long w/ (16) 30" x 7" rolls w/ (4) arm cant flipping section, has a stop, no motor, no drive

208
Spiral Rollcase
18', (3) 24" x 8" smooth rolls, (5) 30" x 8" spiral rolls (13' section), steel plate decking w/ plate stop, (no drive) , Ready to Load!

209
Rollcase
43', w/ (2) arm kick off section, 24" wide x 6" rolls (approx. 14), NO DRIVE, Ready to Load!

210
Gravity Roll
6' x 15" w/ 10" wide x 3 1/2" rolls, steel plate (gravity feed) on legs 3' tall over all, Ready to Load!

211
Gang Edger
48" wide w/ inserted tooth feed rolls, includes frame for laser lights (no lights), hydraulic sets, 50 HP motor, Ready to Load!
Use with lot 228A to reclaim slabs and for tailing device 

212
Meadows #3 Circular Sawmill
96' w/ 3C0065-17 carriage addition, (6) HB carriage PLS 5000 Series setworks, husk frame w/ saw, off bear belt, pantograph, sawyer's cab, 58' - 60' of track w/ end bumpers, carriage drive

213
Pallet of Chain
H-78 chain & (2) rolls 24" x 7"

214
Rotary Knife Hog
48" x 48", each row (4) 12" knives, drop feed bottom discharge w/ sheave & belts, attached hydraulic lift to change knives, feed drop & discharge chutes, 350 HP MJ electric motor 1789 RPM 200 Volts w/ sheave

214A
Scalping screen
Radar 66" wide x 54" long

215
Morbark Chipper
48", (6) knife (big throat), S/N 1114, HFTD w/ sheave

215A
Morbark Chip screen
6 x 6', no cyclone

216
Chipper Mount Frame
w/ motor mount

217
Mellott Chain Type Log Turner
4', mounted on nose skid section, hydraulic motor, no pump package
Will work with the Meadows 6 HB Carriage as well

218
Material Chute
square 18" x 18" w/ angle, 22" straight section angle 4" to 10" w/ clean out door

219
Transfer Frame
15 1/2' x 12 1/2' transfer table, (4) strand w/ wear plates, no sprockets, no chains - Use to build one or add to what you have

220
Lumber Sorting Chain
42' sprocket to sprocket x 7' wide, (3) strand w/ return chain channels, no chain drive sprocket, no motor, no drive, has mount area

221
Vulcanized Belting
54" wide roll of V-cleated belting

222
Vulcanized Belting
54" wide roll of V-cleated belting

801
2002 Tigercat 726B
Wheel Feller Bunchers, ser#7261274, 5600 Head, 30.5 Tires, Good Running Machine

223
Lumber Transfer/Sorting Chain
30' (3) strand, 9 1/2' wide, 100 roller chain, 5 HP motor & reduction drive, 10" tubular steel

223A
Lumber or Log Transfer Deck
11 ft x 13 ft, (4) strand w/ (3) strands of H78 mill chain, drive sprocket, no drive

224
Pit Type Unscrambler
(2) strand w/ H-78 welded lug chain, (2) attached single skate roll sections w/ gear motor drive, HP unknown

224A
Transfer deck
16-1\2' x 9' (4) strand W/ 2' angle section, 29" steel plate slide. Drive sprocket and drive chain, no drive or conveyor chain.

224B
Spiked rolls
(2) lots, Quantity 12

224C
Saws
54" inserted tooth  no shanks or bits. Plus 4 edger carbide tip strobe saws. 24"

225
Debarker Center Conveyor
approx. 20' long (spring centering section w/ (1) hourglass roll H ? Flighted chain / s-drive construction, drive sprocket, no motor, no drive

225B
Meadows 30' cut off saw
W/ 30 HP motor. Good condition to cut cants , ties and more.

226
Log Trough
22' x 1" B x 33" top & 40" overall on I-beam steel legs w/ cross bracing, drive sprocket, no drive

227
72" Slasher Saw Section (Swing Type)
w/ electric motor (probably 50-75 HP), Ready to Load!

228
HMC HT 10 20' Trimmer
double end, 30" saws cuts 10" material, S/N 285-92, good condition, will cut thick material, auto push button sets

228A
*Slab saw tailing device
Dual tailing w/ H-78 chain  horizontal saw works 
great behind Lot 211

228D
Swing type cut off saw
with complete saw frame 30" carbide tip saw

229
Platform Trailer Dump
25' long x 13', cylinders & steel structure w/ 60 HP hydraulic power pack (1775 RPM) 230/960V 154/77 AMP, 8 months ago hydraulic reservoir clean-out complete w/ cylinders (includes vase structural steel & catwalk), Ready to Load!

229A
Steel racks
5' x 3-1/2', 2 ea. 1 x money

230
Steel
19' section, Use for what you need!

231
Steel Box Frame
18' x 24" W x 12" deep w/ welded steel pipes under for support & belt travel, no drive, no sprocket

232
Metal Detector
MDI style, 4' x 45" aperture

819
LB01 1984 Trail King Lowboy
Connect Type, Good Working Con

233
Cant Flipper
7' arm on 18' frame, cylinder mount in place (no cylinder)

820

234
(3) Log Sweeps
15', 39" radius (part), HD air cylinder

235
Conveyor
13' 8" high volume section steel construction uses up to 54" wide belt w/ steel plate belt return under

236
(2) Roll Section
(rubber strip insert rolls), looks like head shaft for HD concave belt conveyor, huge shaft mount reduction drive, 44" wide x 20" roll

237
Jump Up Transfer
4' 10" (3) strand w/ 78 chain, drive sprocket & cylinder position, Everybody Wants One!, has stop section & Ready to Load!, 10' W 14' W overall

238
Transfer or Cant Destacking Deck
(2) strand, 9' from sprocket to sprocket w/ hump on each strand to destack packages (will cut off easily), no chain

239
800 AMP Motor Control Center
Rockwell automation (15) section system w/ 800 AMP supply, (5) sections total, (1) 30 HP, (5) 15 HP, (4) 7.5 HP, includes PLC section w/ disconnect, AB Powerflex VFD w/ braking system

240
800 Amp Variable Feed Drive
Siemens

241
Siemens Allis 800 AMP Motor Control Center
(1) HP, 5 HP, 10 HP w/ disconnect

242
Siemens Allis PLC Control Center
.

243
ABB 800 AMP Switch Gear
(4) Section

244
Westinghouse Switch Gear
.

245
Variable Feed Drives
at least (9) Toshiba G7 

246
2400 V Ground Detection
.

247
Foley Sharpener
Model 357 s/n 33972

248
Foley Sharpener
model 357 s/n 33209

249
Snap-On Tool Chest
78" tool chest

250
Sharpener
Blue, no model or s/n

251
McDonough Sharpener
S/N BDM-189

252
Hammering Block
5'x14"  Band saw Hammering Block
 

252a
Hammering Block
5'x14"  Band saw Hammering Block
 

252b
Hammering Block
5'x14"  Band saw Hammering Block
 

253
Armstrong Filing Clamp
#58-B

254
Stretcher Roll
Hanchett Stretcher Roll ready to load

255
Armstrong Sharpener
#6011

256
Hanchett Sharpener
A-240 R.H. Shop #464

257
Hanchett Sharpener
A-230 R.H.#821

258
Hanchett Sharpener *
A-230 R.H. #759, one side piece broken during unloading. Should be easy fix

259
Log Trough and Chain
19'

260
Fulghum Chipper
Side discharge, 200hp, 60" 6-blade, F1-F11-1183 10513 700

261
Cook Edger
Model 36E2TD, #45, 50hp electric motor, 6"x36", 2 moveable blades, 9' in-feed rolls

262
3-Strand Green Chain
Rooftop chain, 11'x12'

263
Waste Conveyor
40'x24" Ladder back chain, drive and electric motor

264
5-Strand Green Chain
12'x15' w/5" sides, rollers w/gear box

265
3-Strand Green Chain *
120' has a few bent strands and one that needs a weld at the splice. Otherwise in excellent condition.

266
3-Strand Green Chain
Rooftop chain, 10'x10', drive and electric motor

267
Belt Conveyor
16"x28', motor and drive

268
Rollcase
6'x19' w/drive and motor

269
Spiral Rollcase
42"x22'

270
Mellott Vibrating Conveyor
20'

271
Mellott Vibrating Conveyor
20' w/chipper chute and 4' magnet

272
Rollcase
18"x22', Live, motor and drive

273
Rollcase
36"x23', Live

274
3-Head Block Salem Carriage
Air dogs, electric set works

275
Prentice Knuckleboom
Needs new pin in boom

276
Lots of Electric Motors
.

277
Lots of Ladderback chain
approximately 200'

278
Hour Glass Rollcase
36"x19', drive and motor

279
Log Kicker
11' wide, hydraulic

280
3-Strand Green Chain
11'x8', Rooftop chain, drive and motor

281
Waste Conveyor
22"x16', Ladder back chain

282
3-Strand Transfer Deck
10'6"x6', Has 2 roof top chains

283
Rollcase
12"x22', Live, w/drive and motor

284
Rollcase
6'x22', Live

285
Mellott Vibrating Conveyor
24', w/chipper chute

286
Vibrating Conveyor
24"x23', w/chipper chute

287
Waste Conveyor
24"x30', Ladder back chain

288
Webster Vibrating Conveyor
23'

289
Rollcase
36"x19', Live, w/air pop up deck, roof top chain

290
Corley Rollcase
36"x14', Live, air kick up, w/kicker and line bar

291
Tyrone Berry Carriage Drive
Hydraulic unit, w/cooler unit & 100hp electric motor

292
Electric Panel
.

293
Dead Roll
30"x5', 2 roll

294
Belt Conveyor
42"x10'

295
Lumber Carts
4

296
Lincoln Electric Motor
3-200hp

297
Mellott Vibrating Conveyor
10'

298
Airker Air Filter
Model JL0600-C, s/n 9907

299
Tyrone Berry Carriage Drive
2

300
Hydraulic Tank and Stand
.

301
Tyrone Berry Hydraulic Unit
w/cooler

302
Hydraulic Tank and Motor
.

303
Shop Press
.

304
Air compressor
w/10hp electric motor

305
Fuel Tank
300 gallon, w/electric pump

306
Cincinnati Drill Press
Floor model, w/electric motor

307
Extension Forks
10"x8'

308
5-Strand Green Chain
14'x40', Kicker, drive and motor, roof top chain

309
Waste Conveyor
24"x60', w/drive and motor, ladder back chain

310
Cat Mast
w/forks for dip tank

311
Camel Back Green Chain
10'x45', w/kicker, several strands were bent during unloading and need repaired. Otherwise in good condition with good chain.

312
Carriage Track
55'

381
*Implement

313
Hydraulic Tank and Motor
.

314
Dip Tank
6'x7'20'

315
Chain Waste Conveyor
20"x105', w/drive and motor

316
Electric Motor
20hp

317
Electric Motor
5hp

318
Electric Motor
7.5hp

319
Electric Motor
5hp

320
Electric Motor
5hp

321
Electric Motor
10hp

322
Electric Motor
10hp

323
Electric Motor
3hp

324
Electric Motor
200hp

325
Electric Motor
200hp

326
Electric Motor
100hp

327
Electric Motor
10hp

328
Electric Motor
15hp

329
Electric Motor
25hp

330
Electric Motor
10hp

331
Electric Motor
10hp

332
Electric Motor
10hp

333
Electric Motor
10hp

334
Electric Motor
5hp

335
Electric Motor
10hp

336
Electric Motor
25hp

337
Electric Motor
50hp

338
Electric Motor
50hp

339
Electric Motor
125hp

340
Electric Motor
200hp

341
Jones Reduction Gear Drive
7.5 electric motor

342
Cleveland Reduction Gear Drive
7.5 electric motor

343
Sm Cyclo Gear Drive
w/sprocket

344
Dodge TM Reducer Gear Box
.

345
Cone Drive Gear Box
w/5hp motor

346
Sm Cyclo Gear Box
w/5hp motor

347
Radion Gear Box
.

348
Dodge Gear Box
Size 60

349
Westinghouse Gear Drive
w/5hp electric motor

350
Gear Drive
.

351
Radicon Gear Drive
.

352
Grove Gear Drive
.

353
Nuttall Gear Drive
.

354
Gear Drive
w/10hp electric motor

355
Munce Hydraulic Pump
#4021

356
Hydraulic Unit
w/5hp electric motor

357
Tyrone Hydraulic Unit
w/5hp electric motor

358
Boston Gear Reductor *
with brand new 5 hp leeson motor

359
gear box reductor *
with 5 hp motor

360
motor mount *
with cone drive gear box

361
5 hp motor with speed reducer gear box *
ratio 15 , size 325

362
5 hp motor with speed reducer gear box *
ratio 30, size 325

363
5 hp motor with Hub City gear box *
20/1 ratio

364
5 hp motor with Hub City gear box *
ratio 40/1

365
5 hp Leeson motor with speed reducer *
size 325, ratio 40/1

366
air cylinder *
.

367
bolt bin *
good condition

368
bolt bin *
loaded!

369
2-wheeled cart *
.

370
motor mount *
with hydraulic cylinder and gear box

371
control panel for gang saw *
.

372
control panel for edger *
.

373
cable *
approx. 80 feet

374
waste dumpster *
approx. 8' x 4'

374a
idler rollers *
approximately 5- in good condition

375
* Utility Truck Bed Reading
9' X 8' Untility Truck Bed  Classic II  Compartments out the wazooo

375 aa
pressure washer *
.

376
* Lumber Deck
22' X 10 1/2' wide  4 strand no chain or drive, but has drive sprocket
and drive chain
 

375aa
.

376aa
air tank *
 appears to be in superb condition

377
*Blue Light Special
*(3) steel carts on casters,  8HP motor w/ pump
  (1) Steel 8' X 4' HD rack receives forks  

377aa
new parts *
includes new bearings and much more. Buyer gets entire crate

378
*Log Bunks
4' tall X 7-1/2 insice  4 bunk sections heavy duty  

378aa
roll case *
4-roll, approx. 5' x 12 ' live rollcase with 5 hp motor and drive. Rolls approx. 9" diameter

379
*Scrap Steel
lot of scrap steel and culvert

380
* Farm Wagon
5' X 20' steel frame with pulling harness, receives pin 
no floor   

380A
John Deere Bale Spear*
Brand new

382
*safety racks
(3) headache racks 

383
*fuel tank
Approx 500 Gallon

384
*Tank for Used Oil
*Appoximately 600 gallon

385
*Oil Tank w/ Reel
about 150 gallon tank mounted on platform
with reel and hose and pump  (condition unknown)

386
*Oil Tank w/ Reel
Approx 150 gallons with pump and Reel  
condition unknown   mounted on steel platform
to move 

387
*Tool Box w/ oil tank
6' X 10" deep double door tool box w/ hooks
6' X 28" X 11" Reservoir  

388
*Stainless Steel Tank
4' X 20" X 20" 

389
*Horiz Tank Air Compressor
with 11 HP Honda Engine

390
*Big Fuel Tank
Probably 5000 gallon its a big one  With pump

391
*Morbark Stack Trac
mounted on track with grapple 

392
*Mellott Deck
17' (2) Strand W/ C55B RT Chain, No Drive

393
*Catwalk Grating
(2) 13' x 3' Sections

394
* HD Steel Chute
10' L x 4' Opening Down to 2' x 2' Spout, 8' Deep

395
*8' x 8' x 6' Tank
Portable Non Potable Water Tank W/ Plumbing & Shut Off Valve W/ Reflectors

396
*11R 24.5 Tires
(4) 11R 24.5 Tires on Rims, (2) 11R 22 Tires on Rims

397
*24" Rims
Approx. (8) Rims, 12" Deep

398
* Tires on Rims
11R x 22.5 Fully Mounted, Good Tread

399
*24" Rims
Approx. (8) Rims, 12" Deep

400
*Misc. Tires & Rims
11R x 22.5 Tires Mounted on Rims, (4) Rims without Tires, 12" Deep

450
*(2) Packs of Lumber
5 x 5 x 16' Approx. (27) Pieces, 5/4 x 8 x 16' Approx. (36) Pieces

451
* Lumber - Pine Green Rough
1 x 6 x 16' (1) Pack as Marked (No Cart)

452
* Lumber - Pine Green Rough
1 x 8 x 16' Small Pack (No Cart)

453
*Lumber - Pine Green Rough
1 x 6 x 16' Full Bundle, (2) 12 x 12 x 16'

454
*Lumber - Green Pine
(2) Full Packs on Air Dry Sticks

455
*Pine Timbers Green
.

500
Barko 695M Track Loader
knuckleboom, 20' high rise cab, 52' long arm Rotobec grapple, track machine, S/N 11269523627, 7,831+  hours. VERY NICE! Forest Pro, Inc. Service Records on hand 

500A
2012 John Deere 437D Knuckleboom*
Log Loader, New Rebuild on Engine ( all new cyc, new bearings,all new injectors, filters, oil, water separator) New saw chain, Rebuilt stick boom cyc, Rebulit grapple! Pitts Trailer, Enclosed Cab, Grapple, 12,000 hrs, CSI 264 Delimber, ser#1T0437DXPCC232011,Nice Unit!! Good Working Condition

500B
Prentice 280 Knuckleboom Log Loader*
Enclosed Cab, Grapple, Pitts Trailer, CTR Delimber, ser#D280P57688 8251 hrs, Good Running Condition

500C
CSI FTD6000 Delimber
Pull Thru / Flail Combination Delimber, Good Condition
 

500D
John Deere 437C*
knuckle boom loader mounted on Evans Trailer with bucking saw hydraulic
hook up   14,463 hours  S/N WC437CL013275  Purchased New in
2006

500E
Tigercat Log Grapple*
Grapple fits tigercat skidder

501
Cat 938M Rubber Tire Wheel Loader
VIN CAT0838MAJ3R02555, (no attachments), 20.5R 25 Bridgestone tires, good tread 60%, Excellent Machine, 4,145 hours 3/13/20

502
Cat Bucket
quick couple #00014512

502A
Pemberton Loader Bucket*
SS WCB1611600709, Heavy Duty, 12' wide, 8' high, 70" deep, Good Condition

502B
Loader Bucket*
99" wide, 35 high, Good condition

503
Arrow Forks
Model 739 6250-6-96-112, 20,000 lb. capacity, S/N L-25678, one for mount rod bent to be repaired before sale!

503A
Quick attach Pallet Forks*
5' wide, 48" long forks, Excellent Condition

503B
Pair of forks*
48" long

504
Cat Log Grapple
quick couple log bale # 000013055

505
Volvo L60G Wheel Loader
(no attachments), quick couple machine, Bridgestone 20.5R25 tires (good rubber 60%), VIN VCE0L60GJ05611063, 6,871 hours 3/13/20

506
Pemberton Forks
(Volvo L60 forks) Model 412117, S/N LF10154872104

507
Volvo High Tilt Bucket
.

508
Navigator 5500 Piggy Back Forklift
3-wheel  (Lumber Series) w/ hook mounts, etc., tilt & slide mast w/ side shift, outrigger cylinder 4' forks, no hours showing, 5,500 #, 31X15-50-15 front tires, 31X15.50-15 NHS rear

509
Komatsu FG-30-16 Forklift
triple mast w/ side shift, 2,500 #, LP style gas, S/N A23176

510
Komatsu Forklift
5,000 # , 24,000 hours

510A
2008 International Model 17700
with Wet Kit

510B
#87-2013 Freightliner Truck*
Model Coronado, has approx 625,000 miles, dual exhausts, Headache rack, Aluminum front and rear tires, C15 Cat Engine, empty wt 14,500 GVW 80,000, 230 wheelbase, FRO16210C Transmission, 3:90 Meritor Rear Ratio, Dual fuel Tanks, No Blow By, No oil Leaks, Tire Size Ft & Bk 11R 22.5, Notable Repairs 7/2017 - Mileage 378,450 Engine Rebuilt - Gold Kit! 3/2016 - Mileage 312,739 Installed Eaton Rebuilt Transmission! This Nice Truck is Ready to Roll!

510C
#71 - 2007 Western Star*
Approx 855,000 miles, 14L Detroit Engine, Dual Fual Tanks /20's, FT & BK Aluminum Wheels, 60 sleeper size, Engine Brake, Rear Ratio 3:58, Transmission 13SP, GVW 80,000, Empty WT 16898, Tilt Steering, Cruise Control, Exterior Sunvisor, Air Ride Cab, No Blow By , No Oil Leaks, Notable Repairs 12/2018 - mileage 810,736 replaced All Injectors 12/2017 - mileage 734,269. Good Working Condition!

510D
#60 - 2006 Kenworth T800 Truck*
Has 60" Sleeper, Headache Rack, Approx 1,370,000 on Truck, C15 A Cert Engine, Engine Brake, Tilt Steering, Cruise Control, Exterior Sunvisor, Air Ride Cab, Front & Back Aluminum Wheels, 11R 22.5 Tires, Dual Fuel Tanks/ 20's, Air Slide 5th Wheel, Empty WT 17,500, GVW 80,000, Transmission 10 SP, Rear Ratio 3:55, No Blow By, No Oil Leak, Notable Repairs; 11/2016 - mileagen 1,150,000 - Rebuilt Transmission, 10/2017 - mileage - 1,227,405 Injectors installed By CAT, 4/2019 - Mileage - 1,341,087 - Rebuilt back rear 3:55 Ratio, Good Working Condition!

510E
*1989 Ford LNT8000 Truck, VIN # 1FDYW82AXKVA10641
with log bed/ dual tandem axle, with cab mount knuckle boom 
loader super nice set up  sawing in the woods

510F
Head Ache Rack*
7' x 68" , Aluminum, Excellent Condition

511
Army Truck
operating (forwarder), VIN 05A-89977-C127-10794, inspected property 1971

512
Army Truck
for parts

513
Chevy 70 Fire Truck, V-8
VIN 1GBL7DIE5CV117448, Atlas controls pumping system 1,000 gallon Model Brute II, S/N 0491, 10-00R20 tires 90%

514
2013 Ford F-450 Service Truck
w/ utility bed (running boards), VIN 1F))W4HT8DEA76512 (no tools)

515
Ford Flatbed
yard truck / no headlights, 96,310 mileage meter (no back window), 16' bed w/ 4'4" removable sides, VIN 1FDHF70H8CVA49470

516
ITI Walking Floor Trailer
1996, 45' long, VIN 1Z92F4520TT029134

516A
53' Van Trailer
Year 1990, GVWR 65,000 

517
*Flatbed Manac
45' Legend SD, 2016 Model 10248C001F, Spread Axle, VIN 5MC124816H5164127, Excellent 11R 22.5

518
*Drop Deck Trailer
48' Tri Axle Tandem Wheel, 8.25-15 Tires

519
*Flatbed Fruehauf
45' Model SRGT553SP, VIN FW88400

519A
2007 Great Dane Flatbed
FB7527 - Combo - 48' x 96" Good Working Con

519B
2007 Great Dane Flatbed
FB7599 - Combo - 48' x 96" Good Working Condition

519C
1999 Utility Flatbed
FB20 - Combo - 48 x 102" Good Working Con

519D
LT08 1997 Sun Log Trailer
Good Working Con

519E
LT12 1998 Home Made Log Trailer
Good Working Con

519F
LT14 1998 Home Made Log Trailer
Good Working Con

519G
LT21 1997 Pitts Log Trailer
6 Pin Good Working Con

519H
LT35 2004 Pitts Log Trailer
Good Working Con

519I
LT36 2004 Pitts Log Trailer
Good Working Con

519J
LT37 2004 Pitts Log Trailer
Good Working Con

519K
Log Bunks*
210 " x 96" , 8- removable post, Excellent Condition

520
Woods Mower
PRD8400 84" 3-point finish mower, Like New

521
70' Fairbanks Platform Scales
w/ Avery Weightronics digital readout & electronic main frame, last inspection before removal 3/19, Model 10248C0017, S/N 12481645164127  The controls
and load cells are in the galvanized building on top of the hill.  in a crate.  

522
Hydro-Axe 321 Feller Buncher*
3-Wheel, Shear Head, 28L Tires, 17,745 hrs, Good Running Condition

523
1997 Tigercat 726 Feller Buncher*
ser#7260852, 5700 Head, 8598 hrs, New Center Pin, Good Condition

524
2016 John Deere 848L Log Grapple Skidder*
skidder comes w/winch, machine has total of 5067 hrs, Complete New Engine has Only 1667 hrs on it. Two new 35.5 Primex Tires, Sells with low Reserve!

525
1999 International 4700 T 444E*
Vin 1HTSCABN4YH289365, 243,910 MILES, Tires at 40%, Runs and Drives,

526
Franklin Trailer Mover*
Runs great, Detroit 453 Engine, 1930 hrs,

527
Ford 3910 Tractor*
ss EA87812, Enclosed Cab, Runs good Rear tires at 60%,

800
*Treated Lumber
To Be Broken out in packs as announced Pieces are counted
8X8X18 and 16'
6X8X16'
6X6X16,12"
1X6 X 16', 14', 12', and 10'  
 

810

811

812

814

815

816

817

819

820

821

822

824

825

826

827

828

829

831

833

834

835

836

837

838

839

841

843

844

853

854

855

856
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
RMA Enterprises, Inc.
 Live Auction
 
Auction Date(s)
Friday Jun 19, 2020 Completed
Auction Location

Arvonia, VA 23004
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions
Payment in full day of sale. Cash, check, or major credit card. 2% convenience fee for all credit/debit card transactions. All items sell without reserve. 10% buyer's premium applies to all onsite purchases and 13% to all offsite purchases.

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Complete Sawmill and Surplus Logging Related Equipment Auction. Rare Opportunity to Purchase Nice Late Model Equipment at Absolute Auction! Open House Monday - Friday during business hours and Thursday April 30th all day. Live phone and online bidding available! Great opportunity to consign your surplus equipment into cash! Call Jackie Kittrell, Sales Manager, at 931.698.3342. 
Attend this Sale while visiting the Richmond Expo the same weekend.
Complete catalog will be uploaded soon, but here is a list of some of the items that will be in the auction:  Rockwell automation (15) section system w/ 800 AMP supply, Siemens-Allis (14) section system w/ 800 AMP supply,  Siemens-Allis (8) section system
w/ 800 AMP supply, Siemens 800 AMP main electrical entrance, 
Siemens 800 AMP motor control center w/ all variable feed drive controllers, ABB (4) section 1200 AMP main
electrical entrance, Sullair LA-16 75 HP XH screw type
air compressor, MCBI Model H-1505 air dryer, 70' Fairbanks platform scales w/ Avery Weigh Tronics digital readout, 24' x 10' (3) strand transfer deck, 42' x 7' (3) strand sorting chain, 15 1/2 x 12 1/2' transfer table, Morbark 58-60" (6) knife HFTD chipper, spare knives & knife holders for Morbark chipper, 48" x 48" drop feed bottom discharge rotary hog, Nyle 1CP1-L500 dehumidification lumber drying unit, See brightstarauctions.com for much more…
 

0
Catalog Coming Soon
.

00
*INFORMATION LOT
Starting at 9AM on Smalls.  Directly after that we will sell in order
until 1PM ET which is when the rolling stock will be sold... Then picking back up at the last lot left off at after selling the last piece of rolling stock

000
260 Plus or minus acres. lease or sale
*Anyone who is interested in leasing this land or purchasing part of it
can do so.... If they wish to run a mill   Current owner will supply logs
and buy the lumber.  

1
*Container
HD Plastic Container W/ Top

2
*Cable
Cable

3
*LP Tanks
(2) LP Tanks (1) Lot

4
*Air Compressor
Ingersoll-Rand (3) Stage Tank Mount Air Compressor

5
*Lift Forks
Set of 4' Forks for Small Lift

6
*Pallet
Chain, Strapping

7
*Hose
Pallet of Hose

8
*Electrical
Electrical Boxes, GE Small Transformer, Misc. Blue Light Special

9
*Plastic Strapping
(10) Boxes 5/8 x .38 x 1400 lb., 4,000' each, YES that is 40,000 feet in all

10
*Chipper Knives
Chipper Knives & Liner

11
*Chipper Knife Holder
Chipper Knife Holders & Anvils

12
*Misc. Electrical
Misc. Electrical as Marked

13
*Cabinet Contents
Wood Cabinet does not go, Air Line Supplies, Monitors & Big Bolts

14
* Weg Breaker
Weg Breaker In Enclosure

15
*Cylinder
Big Cylinder Probably 36"

16
*Scrap Metal
Components, Rollers, Blue Light Special

17
*Copper Wire
*

18
*Chutes
(1) Chutes as Marked

19
* Hydraulic Pack
Hydraulic Tank W/ 20 HP Motor, No Pump, 48" x 18" x 17" Tank

20
* Conduit
PVC and Galvanized Conduit & Water Pipe

21
*Fire Extinguishers
Includes Ear Plugs, Drop Hitch, Bearings, Bolts, Tool Boxes, Pillow Black Bearings

22
*Acetylene Torch
Torch & Gauges W/ Mask W/ Cart (No Tanks)

23
*Motors
(1) Weg 10/7.5 HP, (1) 3 HP, (2) 1 HP, (1) 2 HP

24
*Strapping & Tools
Crimp & Seal, 5/8 Plastic Strapping

25
*Pallet
Mis. Blue Light Special

26
*Tool Chest
3-1/2 X 1-1/2 X 2 (8) drawer and open top

28
.

29
*Belting
20"W  8"W and Lacing

30
* Belting
36" Wide

31
*Pallet
Roll of CAT 3 Wire, chargers, halogen bulbs, safety gear and Honeywell controls

32
*Extension cords
One Lot with cart

35
*Electrical
hoto Eyes, Fastners Cat 3 Spool of wire 1000'

37
*Pallet of Misc
.

38
*Pallet
Fastners

39
*Pallet of Misc
.

40
*Misc Electrical
.

41
* Box with Contents
.

42
*Tool Chest
.

43
*Metal Cabinet With Bins
Side by side metal cabinet with plastic sorting bins

44
*Electric Air Compressor
Vertical Tank Mount

45
*Jet Hack Saw
Metal Cutting Hack Saw  

46
*Ware Plates
Ware Plates

47
*rigging tools
Chain, binders and hook 

48
*Shop Vac
Elect Shop Vac

50
*Various Mill Chain
Roller Chain, 81 X and C55B

51
*Pallet of Parts
Couplers Sprockets and Sheaves all look new

52
*Pallet of Sprockets
.

53
* Lot of Grinding Wheels
14" X 4" X 1-1/4" for knife grinder or what ever you make them fit

54
*Cart
Cart with contents

55
*Mill Parts
Total Contents of Shelves on wall in air compressor room,
Tailing belt, C55B RT chain  H78 Chain Sprockets
pillow block bearings, new sheave and items too numerous to mention

56
*siemens Electrical
Breakers Entire lot

57
*Toshiba VFD
(1) VFD and (1) Transistor Converter

58
* Motors and pump
Hydraulic pump, electric motor and hydraulic motor

59
*Tool Chest
with tools as shown

100
Log Deck
30’ x 12’ wide log deck w/ stop-n-load, hydraulic motor w/ Tulsa winch drive (no steel supports

101
Log Trough
40'  conveyor w/ 112 flight chain, S-drive construction w/ 7.5 HP motor & red drive w/ replace pulley & sprocket (no support steel)

102
Cambio 5-Ring Debarker
Cambio Type 35 (ring debarker, rebuild, 5-arm) by Woodland Machine, Machine No. 28, includes infeed & outfeed press rolls (no support steel underneath)

102A
Debarker Parts
ring belts & knives

103
Debarker Cab
10' x 12' operator's control cab, (3) glass panel view, lights, climate control, fire extinguisher (no wire or conduit) w/ operator's chair, no controls, Includes steel support

104
PLC Controls
 for debarker w/ industrial intercom & power box, includes ACME circuit breaker panel

105
Catwalk
around debarker including access stairs, including misc. & on ground as marked

106
Hydraulic Power Pack
HPU for debarking system, 20 HP motor w/ pump w/ 4' x 4' x 18" reservoir

107
Debarker System 101- 107 Offered w/ 10% Raise
Entire lots 101-106 tie back Cambio debarking system w/ 10% raise - Does Not Include lot #100, Support Steel lot #112 to sell separate

108
Belt Conveyor
45' x 54" wide new cleated belting w/ closed in bottom return, steel cover except under debarker, Smcyclo drive Crown Tipton motor 5 HP

109
Belt Conveyor
55' x 36" deep well belt conveyor, Smcyclo drive / Crown Tipton 5 HP motor, includes support steel for incline section

110
Log Trough
20' Morbark log trough conveyor behind debarker w/ gear motor drive (kicker section unhooked)

111
Log Trough Conveyor
37'  w/ H- flight log chain, hydraulic kick off, sweep section w/ Falk reduction drive & motor w/ green steel supports only

112
Support Steel As Marked
 beams under debarker, log troughs & log deck including steel under log troughs except green legs under 111

113
Log Deck
28' x 10' W (4) strand HD ,  2" tubular steel frame w/ H-78 chain, nose skid section, stop and load (hydraulic) w/ Tulsa winch drive & motor

114
Chain Log Turner
Mellott Style (1) bearing on top needs bolt, includes hydraulic motor & control value at saw cab

115
Frickco Timber Tiger 4-HB Carriage
15' long w/ controls, includes 45' track, HPU onboard, sawyer controls in saw cab, no cab, no drive

116
Tyrone Berry Carriage Drive
 40 HP 1780 RPM drum, end of track mount w/ pump package & extra large cooler

117
Husk
5' husk frame w/ off bear belt w/ 6' mandrel w/ sheave w/ gear motor

118
Operators Cab
4 1/2' x 6' Cleereman sawyer's cab w/ A/C & lights, insulated, no controls

119
125 HP Motor
Leeson, 1788 RPM 460 V, frame 445T

120
Lot #113-119 Tie Back
Tie Back Lot #'s 113-119 w/ 10% raise

121
Saw Blade
56" F7 inserted tooth saw on mandrel

122
Saw
56" F7 inserted tooth saw on mandrel

123
Slab Dump Conveyor
13' x 24" wide  

124
Cant Tie Catcher
13' 4-cylinder catcher off head saw

125
Rollcase
18' x 30" wide  section #1, (7) 6" x 30" wide rolls, NO DRIVE

126
Rollcase
20' x 24", 8" x 24" (rolls) w/ drive & 81X chain w/ Meadows (4) strand transfer w/ gear motor drive, air bag lift, has electronic eye for stop & lift

127
Sub Structure Steel
All under sawmill including catwalks, tubular support & I-beams support w/ apron plates Not already sold

128
Belt Conveyor Sell after Select Band Mill
Approx. 130' bulk handling System, Inc. Model E-3-B54 deep well conveyor, 16" deep x 54" wide w/ 48" belt w/ very good cleated belting, Smcyclo drive & 5 HP motor

129
Concave Belt Conveyor
36"x 82'  under main sawmill w/ shaft mount  drive & elec motor

130
Hydraulic Power Pack
HPU under saw cab, 15 HP motor

131
Transformer
ACME transformer 25 KVA 240 x 58 volts w/ 100 AMP breaker box

132
400 AMP Entrance
Square D Type 1 400 AMP enclosure, (13) 20 AMP breakers, (2) 50 AMP breakers, (2) 40 AMP breakers, (1) 30 AMP breaker, catalog # NF-466L4C, 3-phase

133
Motor Controls
Cutler Hammer size 3 starter control, Westinghouse size 5 motor control, TCC timer

134
Controller Box
(8) SCEO-3, (1) SC-E4, (1) SC-E25, (1) Siemen Allis ABBCT-AHE, Eaton PLC controllers, motor control & PLC control

135
250 AMP Breaker
Square D  

136
400 AMP Main
Square D main disconnect

137
GE 300- Line Control
 combination motor control push button

138
GE 300- Line Control
 combination motor control push button

139
GE 300- Line Control
 combination motor control push button

140
GE 300- Line Control
combination motor control push button

141
Vibrating Conveyor
20' x 24" Webster Model F3M  size 24/30 9/16 stroke w/ 3 HP drive, 6' dust screen dropout  

142
Box Chain Conveyor
43' w/ added flared trough sides, 12" bottom x 9" deep, plus 13' added flared sides w/ 5 HP mtr  Smcyclo drive

143
Radial Drag Chain
45' x 20" deep round bottom conveyor w/ radius paddle chain w/ 7.5 HP motor w/ reduction drive incline

144
Vibrating Conveyor
Progress 22' x 24" x 10" deep, 30" overall  w/ transition chute

145
Steel Apron Plates
(2) 12' x 4' sections w/ support steel

146
Progress 60" Chipper
 6-knife chipper Smith Sawmill retrofit #134, big throat w/ elbow 

147
500 HP Motor
WEG  1188 RPM electric motor

148
Benshaw Soft Start
size 7 soft start in factory cabinet

149
Morbark Cyclone
 collector

150
BM & M Chip Screen
 7' x 10' chip sizing screen w/ steel structure

151
Tie Lot #146-150
Tie lot # 146-150 back together w/ 10% raise

152
Hanchett Knife Grinder
 size 38 type RA, S/N 126 w/ knife set screw jig

153
Chipper Knives
21 1/2" long chipper knives 38-42

154
Belt Conveyor
29' x 5" over size chip return w/ feed chute w/ 2 HP gear motor drive

155
Belt Conveyor
60' x 24" deep trough, 13" deep, heavy duty steel construction

156
Transfer Deck
40' x 12' (4) strand steel plate w/ C55B RT chain

157
Pendu Barn Sweep
70' x 42" x 10" deep conveyor, good condition, heavy duty construction w/ motor & drive

158
Round Bottom Conveyor
49' x 12" incline  w/ H-78 rounded paddle drag chain, motor & drive

159
Dual Bay Level Load System
45'  w/ chute/bolted supports and steel, 32' auger (1) in each bay

160
Lumber Conveyor
(4) strand w/ 81X chain & attached slide section & lumber stop, gear motor drive

161
Rollcase
17' x 36" wide (6) 6" rolls w/ jump up cylinder

162
Meadows Hercules Edger
 8"  w/ position infeed table, (3) roller chain jump up (hydraulic drive), (5) roll infeed w/ hydraulic drive,  line light cabinet w/ tailing device

163
150 HP Motor
Reliance   1785 RMP frame 445T

164
Catwalk
catwalk & steel support at edger w/ access stairs (2) sets

165
Saws
Approx. (64) 24" Carbide Tip Edger Strobe Saws

166
Electrical
GE 60 AMP disconnect, (3) GE 300 line control w/ (2) 30 AMP disconnects, (1) Square D 30 AMP disconnect

167
Benshaw Soft Start
motor control for edger motor (150 HP or larger)

168
Variable Feed Drive
LS 100, (2) MT-32 PLC controllers & related switch gear

169
400 AMP Safety Switch
GE , 600 VAC MAX HP 350

170
Motor Control
(4) GE Size 0 motor control (combination), (1) GE size 1 motor control (combination), (1) GE size 2 motor control w/ 60 AMP safety switch, GE 15 KVA transformer 120/240V panel

171
Soft Start Motor Control
WEG SSW06 ,,Model SSW06020572257ESZ, 220/575V, S/N 84444, MCG 1D18011 ,

172
Meadows Lumber Sorter
100' (5) bay 

173
Pressure Tank
reserve air 

174
Lumber Cart
8' x 4 1/2' (2) 4' x 4" tubular steel uprights on steel casters

175
Lumber Cart
8' x 4 1/2' (2) 4' x 4" tubular steel uprights, (2) steel uprights, steel casters

176
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

177
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

178
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

179
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

180
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

181
Lumber Rack
8' x 4 1/2" (2) 4 x 4" tubular steel uprights, no casters

182
Lumber Rack
8' x 4 1/2' (2) 3' x 4" uprights, no casters

183
Lumber Rack
8' x 4 1/2" (2) 4' x 4" uprights, one caster

184
Safety Switches
GE (1) 200 AMP, (1) 100 AMP, (4) 30 AMP w/ (1) size 0 NEMA MC

185
Motor Control
GE Nerra size 4  ( was used for debarker 75 HP), GE 200 AMP  s/s

186
Siemens 800 AMP MCC
 used for air compressor, debarker area 10 HP, 20 HP, 7.5 HP, 25 HP

187
Air Compressor
Ingersoll Rand T30 tank  25 HP 3-cyl.  Model 25E, S/N 30T 509 218

188
Sullair LS-10 Air Compressor
 screw type 25 HP, mounted size 3 NEMA starter

189
Turbo Type Air Dryer
Air Tek Model TD-170, S/N 9708, single phase 230V

189A
Grease pump
Pump Master 3  with partial 55 gallon supply of JT-6 HI-TEMP

189B
Sullair LS16
 50 HP Air Compressor 

189C
MCBI air dryer
 MODEL H-1508. S/N DH 101731101

189D
Nyle dehumidification dry kiln
Model ICP1L500. S/N 166779. 3 Phase 460 volts. 2016 new never installed

189E
Skid loader hydraulic cooler
 Looks like Bobcat

189F
Forestry measuring system
Waratah  Model HTH622B S/N 1WA622BXJB0001604. 12/11

189G
Miller welder generator
Trailblazer 275DC DC 11,000 Watt   Professional series. 120/240 Volt

190
Lumber Deck
14' x 13'5" (4) strand   w/ (4) strands of 81X chain, 3 HP electric motor direct couple to Falk reduction drive

191
Select 4221E Bandmill
 6" Double Cut Blades S/N 3N11900 x 48ORS146, air strain, Wein view panel, lever controls, Manual on site w/ machine. Like New

191A
Double Cut Band Blades
18 gauge, New 6" wide 2 boxes times the money. 5 blades ea. box

191B
Select 21' 3" X 6" double cut band blades
18 guage  used. 5 ready to go. 1 may need sharpened

191C
Sawyers Chair
New select band mill  

192
Select Log Deck
LD24- x 6' wide (2) strand w/ 81X chain, factory supports & substructure, dual cylinder hydraulic stop & load log section, hydraulic motor w/ gear reduction drive

192A
Bridge Mat Maker*
Machine to build bridge mats, good condition

193
Motor Controls
In Select Saw Cab Nema size 0, GE 200 AMP  and (2) 30 AMP 

194
2014 Wood-Mizer LT70
 6 x 16', 4,756 hours, mounted on 5th wheel trailer chassis, 30 HP motor, Distribution Control System, computerized setworks, Air Strain

194A
Generac Diesel Generator
30 KW  Detroit Engine..  

195
1996 Wood-Mizer LT40E15
, 14" , VIN# 456B42414TNRF8416 w/ 15 HP motor, Air Strain

196
Wood-Mizer (4) Head Resaw
w/ slat feed through (hydraulic drive), hydraulic press rolls, air strain, 15 HP on each head, S/N MH409503235

197
52" Collector Fan
 w/ 75 HP motor, includes flange on intake & discharge, 18" intake, 24" overall, 16" discharge, 19" overall, blower 20" wide

198
36" Collector Fan
 14" wide, flange on intake, 19" intake, bottom side discharge, 14", sheave motor bracket mount but no motor

199
Chip Blower
36" Morbark single chute w/ 25 HP motor, includes receiving flange, 18' of discharge pipe 12" x 16"

200
Auger Conveyor
Goodman 16' fully enclosed, top center feed or discharge 12" x 30" one end feed or discharge, approx. 24" x 24", approx. 27" deep & 24" wide, 21" auger blade

201
Doodle Paddle Chain
28' doodle chain conveyor (wood bottom), rubber drag paddles, sprocket, no drive

202
Container Load Pusher
35' container push loader to receive forks, 8" tubular steel construction, 6' x 6' push plate

203
Catwalk & Stairs
(1) 18' crossover section (ladder), (1) 19 1/2' crossover section (stairs), (5) sets of various staircases different height

204
Wood-Mizer Off Bear Belt
11', S/N CBT2-430-05160032A1.00, 35" wide cleated belting, no drive

205
Box Belt Conveyor
26' x 36" W x 9" D w/ 34" belt, 5 HP gear motor drive, (1) section small plate bottom cut out (dropout material?) steel plate easily weld in to repair if not needed

206
Belt Conveyor
20' x 27" W w/ 22" belt, (1) side has 16" deep steel wall, other side 9' section of 16" steel, shaft mount speed reducer

206A
Roll case
34"x15' with 7"×32"rolls ,no drive , steel plate decking

207
Rollcase W/ Cant Flipper
Approx. 36' long w/ (16) 30" x 7" rolls w/ (4) arm cant flipping section, has a stop, no motor, no drive

208
Spiral Rollcase
18', (3) 24" x 8" smooth rolls, (5) 30" x 8" spiral rolls (13' section), steel plate decking w/ plate stop, (no drive) , Ready to Load!

209
Rollcase
43', w/ (2) arm kick off section, 24" wide x 6" rolls (approx. 14), NO DRIVE, Ready to Load!

210
Gravity Roll
6' x 15" w/ 10" wide x 3 1/2" rolls, steel plate (gravity feed) on legs 3' tall over all, Ready to Load!

211
Gang Edger
48" wide w/ inserted tooth feed rolls, includes frame for laser lights (no lights), hydraulic sets, 50 HP motor, Ready to Load!
Use with lot 228A to reclaim slabs and for tailing device 

212
Meadows #3 Circular Sawmill
96' w/ 3C0065-17 carriage addition, (6) HB carriage PLS 5000 Series setworks, husk frame w/ saw, off bear belt, pantograph, sawyer's cab, 58' - 60' of track w/ end bumpers, carriage drive

213
Pallet of Chain
H-78 chain & (2) rolls 24" x 7"

214
Rotary Knife Hog
48" x 48", each row (4) 12" knives, drop feed bottom discharge w/ sheave & belts, attached hydraulic lift to change knives, feed drop & discharge chutes, 350 HP MJ electric motor 1789 RPM 200 Volts w/ sheave

214A
Scalping screen
Radar 66" wide x 54" long

215
Morbark Chipper
48", (6) knife (big throat), S/N 1114, HFTD w/ sheave

215A
Morbark Chip screen
6 x 6', no cyclone

216
Chipper Mount Frame
w/ motor mount

217
Mellott Chain Type Log Turner
4', mounted on nose skid section, hydraulic motor, no pump package
Will work with the Meadows 6 HB Carriage as well

218
Material Chute
square 18" x 18" w/ angle, 22" straight section angle 4" to 10" w/ clean out door

219
Transfer Frame
15 1/2' x 12 1/2' transfer table, (4) strand w/ wear plates, no sprockets, no chains - Use to build one or add to what you have

220
Lumber Sorting Chain
42' sprocket to sprocket x 7' wide, (3) strand w/ return chain channels, no chain drive sprocket, no motor, no drive, has mount area

221
Vulcanized Belting
54" wide roll of V-cleated belting

222
Vulcanized Belting
54" wide roll of V-cleated belting

801
2002 Tigercat 726B
Wheel Feller Bunchers, ser#7261274, 5600 Head, 30.5 Tires, Good Running Machine

223
Lumber Transfer/Sorting Chain
30' (3) strand, 9 1/2' wide, 100 roller chain, 5 HP motor & reduction drive, 10" tubular steel

223A
Lumber or Log Transfer Deck
11 ft x 13 ft, (4) strand w/ (3) strands of H78 mill chain, drive sprocket, no drive

224
Pit Type Unscrambler
(2) strand w/ H-78 welded lug chain, (2) attached single skate roll sections w/ gear motor drive, HP unknown

224A
Transfer deck
16-1\2' x 9' (4) strand W/ 2' angle section, 29" steel plate slide. Drive sprocket and drive chain, no drive or conveyor chain.

224B
Spiked rolls
(2) lots, Quantity 12

224C
Saws
54" inserted tooth  no shanks or bits. Plus 4 edger carbide tip strobe saws. 24"

225
Debarker Center Conveyor
approx. 20' long (spring centering section w/ (1) hourglass roll H ? Flighted chain / s-drive construction, drive sprocket, no motor, no drive

225B
Meadows 30' cut off saw
W/ 30 HP motor. Good condition to cut cants , ties and more.

226
Log Trough
22' x 1" B x 33" top & 40" overall on I-beam steel legs w/ cross bracing, drive sprocket, no drive

227
72" Slasher Saw Section (Swing Type)
w/ electric motor (probably 50-75 HP), Ready to Load!

228
HMC HT 10 20' Trimmer
double end, 30" saws cuts 10" material, S/N 285-92, good condition, will cut thick material, auto push button sets

228A
*Slab saw tailing device
Dual tailing w/ H-78 chain  horizontal saw works 
great behind Lot 211

228D
Swing type cut off saw
with complete saw frame 30" carbide tip saw

229
Platform Trailer Dump
25' long x 13', cylinders & steel structure w/ 60 HP hydraulic power pack (1775 RPM) 230/960V 154/77 AMP, 8 months ago hydraulic reservoir clean-out complete w/ cylinders (includes vase structural steel & catwalk), Ready to Load!

229A
Steel racks
5' x 3-1/2', 2 ea. 1 x money

230
Steel
19' section, Use for what you need!

231
Steel Box Frame
18' x 24" W x 12" deep w/ welded steel pipes under for support & belt travel, no drive, no sprocket

232
Metal Detector
MDI style, 4' x 45" aperture

819
LB01 1984 Trail King Lowboy
Connect Type, Good Working Con

233
Cant Flipper
7' arm on 18' frame, cylinder mount in place (no cylinder)

820

234
(3) Log Sweeps
15', 39" radius (part), HD air cylinder

235
Conveyor
13' 8" high volume section steel construction uses up to 54" wide belt w/ steel plate belt return under

236
(2) Roll Section
(rubber strip insert rolls), looks like head shaft for HD concave belt conveyor, huge shaft mount reduction drive, 44" wide x 20" roll

237
Jump Up Transfer
4' 10" (3) strand w/ 78 chain, drive sprocket & cylinder position, Everybody Wants One!, has stop section & Ready to Load!, 10' W 14' W overall

238
Transfer or Cant Destacking Deck
(2) strand, 9' from sprocket to sprocket w/ hump on each strand to destack packages (will cut off easily), no chain

239
800 AMP Motor Control Center
Rockwell automation (15) section system w/ 800 AMP supply, (5) sections total, (1) 30 HP, (5) 15 HP, (4) 7.5 HP, includes PLC section w/ disconnect, AB Powerflex VFD w/ braking system

240
800 Amp Variable Feed Drive
Siemens

241
Siemens Allis 800 AMP Motor Control Center
(1) HP, 5 HP, 10 HP w/ disconnect

242
Siemens Allis PLC Control Center
.

243
ABB 800 AMP Switch Gear
(4) Section

244
Westinghouse Switch Gear
.

245
Variable Feed Drives
at least (9) Toshiba G7 

246
2400 V Ground Detection
.

247
Foley Sharpener
Model 357 s/n 33972

248
Foley Sharpener
model 357 s/n 33209

249
Snap-On Tool Chest
78" tool chest

250
Sharpener
Blue, no model or s/n

251
McDonough Sharpener
S/N BDM-189

252
Hammering Block
5'x14"  Band saw Hammering Block
 

252a
Hammering Block
5'x14"  Band saw Hammering Block
 

252b
Hammering Block
5'x14"  Band saw Hammering Block
 

253
Armstrong Filing Clamp
#58-B

254
Stretcher Roll
Hanchett Stretcher Roll ready to load

255
Armstrong Sharpener
#6011

256
Hanchett Sharpener
A-240 R.H. Shop #464

257
Hanchett Sharpener
A-230 R.H.#821

258
Hanchett Sharpener *
A-230 R.H. #759, one side piece broken during unloading. Should be easy fix

259
Log Trough and Chain
19'

260
Fulghum Chipper
Side discharge, 200hp, 60" 6-blade, F1-F11-1183 10513 700

261
Cook Edger
Model 36E2TD, #45, 50hp electric motor, 6"x36", 2 moveable blades, 9' in-feed rolls

262
3-Strand Green Chain
Rooftop chain, 11'x12'

263
Waste Conveyor
40'x24" Ladder back chain, drive and electric motor

264
5-Strand Green Chain
12'x15' w/5" sides, rollers w/gear box

265
3-Strand Green Chain *
120' has a few bent strands and one that needs a weld at the splice. Otherwise in excellent condition.

266
3-Strand Green Chain
Rooftop chain, 10'x10', drive and electric motor

267
Belt Conveyor
16"x28', motor and drive

268
Rollcase
6'x19' w/drive and motor

269
Spiral Rollcase
42"x22'

270
Mellott Vibrating Conveyor
20'

271
Mellott Vibrating Conveyor
20' w/chipper chute and 4' magnet

272
Rollcase
18"x22', Live, motor and drive

273
Rollcase
36"x23', Live

274
3-Head Block Salem Carriage
Air dogs, electric set works

275
Prentice Knuckleboom
Needs new pin in boom

276
Lots of Electric Motors
.

277
Lots of Ladderback chain
approximately 200'

278
Hour Glass Rollcase
36"x19', drive and motor

279
Log Kicker
11' wide, hydraulic

280
3-Strand Green Chain
11'x8', Rooftop chain, drive and motor

281
Waste Conveyor
22"x16', Ladder back chain

282
3-Strand Transfer Deck
10'6"x6', Has 2 roof top chains

283
Rollcase
12"x22', Live, w/drive and motor

284
Rollcase
6'x22', Live

285
Mellott Vibrating Conveyor
24', w/chipper chute

286
Vibrating Conveyor
24"x23', w/chipper chute

287
Waste Conveyor
24"x30', Ladder back chain

288
Webster Vibrating Conveyor
23'

289
Rollcase
36"x19', Live, w/air pop up deck, roof top chain

290
Corley Rollcase
36"x14', Live, air kick up, w/kicker and line bar

291
Tyrone Berry Carriage Drive
Hydraulic unit, w/cooler unit & 100hp electric motor

292
Electric Panel
.

293
Dead Roll
30"x5', 2 roll

294
Belt Conveyor
42"x10'

295
Lumber Carts
4

296
Lincoln Electric Motor
3-200hp

297
Mellott Vibrating Conveyor
10'

298
Airker Air Filter
Model JL0600-C, s/n 9907

299
Tyrone Berry Carriage Drive
2

300
Hydraulic Tank and Stand
.

301
Tyrone Berry Hydraulic Unit
w/cooler

302
Hydraulic Tank and Motor
.

303
Shop Press
.

304
Air compressor
w/10hp electric motor

305
Fuel Tank
300 gallon, w/electric pump

306
Cincinnati Drill Press
Floor model, w/electric motor

307
Extension Forks
10"x8'

308
5-Strand Green Chain
14'x40', Kicker, drive and motor, roof top chain

309
Waste Conveyor
24"x60', w/drive and motor, ladder back chain

310
Cat Mast
w/forks for dip tank

311
Camel Back Green Chain
10'x45', w/kicker, several strands were bent during unloading and need repaired. Otherwise in good condition with good chain.

312
Carriage Track
55'

381
*Implement

313
Hydraulic Tank and Motor
.

314
Dip Tank
6'x7'20'

315
Chain Waste Conveyor
20"x105', w/drive and motor

316
Electric Motor
20hp

317
Electric Motor
5hp

318
Electric Motor
7.5hp

319
Electric Motor
5hp

320
Electric Motor
5hp

321
Electric Motor
10hp

322
Electric Motor
10hp

323
Electric Motor
3hp

324
Electric Motor
200hp

325
Electric Motor
200hp

326
Electric Motor
100hp

327
Electric Motor
10hp

328
Electric Motor
15hp

329
Electric Motor
25hp

330
Electric Motor
10hp

331
Electric Motor
10hp

332
Electric Motor
10hp

333
Electric Motor
10hp

334
Electric Motor
5hp

335
Electric Motor
10hp

336
Electric Motor
25hp

337
Electric Motor
50hp

338
Electric Motor
50hp

339
Electric Motor
125hp

340
Electric Motor
200hp

341
Jones Reduction Gear Drive
7.5 electric motor

342
Cleveland Reduction Gear Drive
7.5 electric motor

343
Sm Cyclo Gear Drive
w/sprocket

344
Dodge TM Reducer Gear Box
.

345
Cone Drive Gear Box
w/5hp motor

346
Sm Cyclo Gear Box
w/5hp motor

347
Radion Gear Box
.

348
Dodge Gear Box
Size 60

349
Westinghouse Gear Drive
w/5hp electric motor

350
Gear Drive
.

351
Radicon Gear Drive
.

352
Grove Gear Drive
.

353
Nuttall Gear Drive
.

354
Gear Drive
w/10hp electric motor

355
Munce Hydraulic Pump
#4021

356
Hydraulic Unit
w/5hp electric motor

357
Tyrone Hydraulic Unit
w/5hp electric motor

358
Boston Gear Reductor *
with brand new 5 hp leeson motor

359
gear box reductor *
with 5 hp motor

360
motor mount *
with cone drive gear box

361
5 hp motor with speed reducer gear box *
ratio 15 , size 325

362
5 hp motor with speed reducer gear box *
ratio 30, size 325

363
5 hp motor with Hub City gear box *
20/1 ratio

364
5 hp motor with Hub City gear box *
ratio 40/1

365
5 hp Leeson motor with speed reducer *
size 325, ratio 40/1

366
air cylinder *
.

367
bolt bin *
good condition

368
bolt bin *
loaded!

369
2-wheeled cart *
.

370
motor mount *
with hydraulic cylinder and gear box

371
control panel for gang saw *
.

372
control panel for edger *
.

373
cable *
approx. 80 feet

374
waste dumpster *
approx. 8' x 4'

374a
idler rollers *
approximately 5- in good condition

375
* Utility Truck Bed Reading
9' X 8' Untility Truck Bed  Classic II  Compartments out the wazooo

375 aa
pressure washer *
.

376
* Lumber Deck
22' X 10 1/2' wide  4 strand no chain or drive, but has drive sprocket
and drive chain
 

375aa
.

376aa
air tank *
 appears to be in superb condition

377
*Blue Light Special
*(3) steel carts on casters,  8HP motor w/ pump
  (1) Steel 8' X 4' HD rack receives forks  

377aa
new parts *
includes new bearings and much more. Buyer gets entire crate

378
*Log Bunks
4' tall X 7-1/2 insice  4 bunk sections heavy duty  

378aa
roll case *
4-roll, approx. 5' x 12 ' live rollcase with 5 hp motor and drive. Rolls approx. 9" diameter

379
*Scrap Steel
lot of scrap steel and culvert

380
* Farm Wagon
5' X 20' steel frame with pulling harness, receives pin 
no floor   

380A
John Deere Bale Spear*
Brand new

382
*safety racks
(3) headache racks 

383
*fuel tank
Approx 500 Gallon

384
*Tank for Used Oil
*Appoximately 600 gallon

385
*Oil Tank w/ Reel
about 150 gallon tank mounted on platform
with reel and hose and pump  (condition unknown)

386
*Oil Tank w/ Reel
Approx 150 gallons with pump and Reel  
condition unknown   mounted on steel platform
to move 

387
*Tool Box w/ oil tank
6' X 10" deep double door tool box w/ hooks
6' X 28" X 11" Reservoir  

388
*Stainless Steel Tank
4' X 20" X 20" 

389
*Horiz Tank Air Compressor
with 11 HP Honda Engine

390
*Big Fuel Tank
Probably 5000 gallon its a big one  With pump

391
*Morbark Stack Trac
mounted on track with grapple 

392
*Mellott Deck
17' (2) Strand W/ C55B RT Chain, No Drive

393
*Catwalk Grating
(2) 13' x 3' Sections

394
* HD Steel Chute
10' L x 4' Opening Down to 2' x 2' Spout, 8' Deep

395
*8' x 8' x 6' Tank
Portable Non Potable Water Tank W/ Plumbing & Shut Off Valve W/ Reflectors

396
*11R 24.5 Tires
(4) 11R 24.5 Tires on Rims, (2) 11R 22 Tires on Rims

397
*24" Rims
Approx. (8) Rims, 12" Deep

398
* Tires on Rims
11R x 22.5 Fully Mounted, Good Tread

399
*24" Rims
Approx. (8) Rims, 12" Deep

400
*Misc. Tires & Rims
11R x 22.5 Tires Mounted on Rims, (4) Rims without Tires, 12" Deep

450
*(2) Packs of Lumber
5 x 5 x 16' Approx. (27) Pieces, 5/4 x 8 x 16' Approx. (36) Pieces

451
* Lumber - Pine Green Rough
1 x 6 x 16' (1) Pack as Marked (No Cart)

452
* Lumber - Pine Green Rough
1 x 8 x 16' Small Pack (No Cart)

453
*Lumber - Pine Green Rough
1 x 6 x 16' Full Bundle, (2) 12 x 12 x 16'

454
*Lumber - Green Pine
(2) Full Packs on Air Dry Sticks

455
*Pine Timbers Green
.

500
Barko 695M Track Loader
knuckleboom, 20' high rise cab, 52' long arm Rotobec grapple, track machine, S/N 11269523627, 7,831+  hours. VERY NICE! Forest Pro, Inc. Service Records on hand 

500A
2012 John Deere 437D Knuckleboom*
Log Loader, New Rebuild on Engine ( all new cyc, new bearings,all new injectors, filters, oil, water separator) New saw chain, Rebuilt stick boom cyc, Rebulit grapple! Pitts Trailer, Enclosed Cab, Grapple, 12,000 hrs, CSI 264 Delimber, ser#1T0437DXPCC232011,Nice Unit!! Good Working Condition

500B
Prentice 280 Knuckleboom Log Loader*
Enclosed Cab, Grapple, Pitts Trailer, CTR Delimber, ser#D280P57688 8251 hrs, Good Running Condition

500C
CSI FTD6000 Delimber
Pull Thru / Flail Combination Delimber, Good Condition
 

500D
John Deere 437C*
knuckle boom loader mounted on Evans Trailer with bucking saw hydraulic
hook up   14,463 hours  S/N WC437CL013275  Purchased New in
2006

500E
Tigercat Log Grapple*
Grapple fits tigercat skidder

501
Cat 938M Rubber Tire Wheel Loader
VIN CAT0838MAJ3R02555, (no attachments), 20.5R 25 Bridgestone tires, good tread 60%, Excellent Machine, 4,145 hours 3/13/20

502
Cat Bucket
quick couple #00014512

502A
Pemberton Loader Bucket*
SS WCB1611600709, Heavy Duty, 12' wide, 8' high, 70" deep, Good Condition

502B
Loader Bucket*
99" wide, 35 high, Good condition

503
Arrow Forks
Model 739 6250-6-96-112, 20,000 lb. capacity, S/N L-25678, one for mount rod bent to be repaired before sale!

503A
Quick attach Pallet Forks*
5' wide, 48" long forks, Excellent Condition

503B
Pair of forks*
48" long

504
Cat Log Grapple
quick couple log bale # 000013055

505
Volvo L60G Wheel Loader
(no attachments), quick couple machine, Bridgestone 20.5R25 tires (good rubber 60%), VIN VCE0L60GJ05611063, 6,871 hours 3/13/20

506
Pemberton Forks
(Volvo L60 forks) Model 412117, S/N LF10154872104

507
Volvo High Tilt Bucket
.

508
Navigator 5500 Piggy Back Forklift
3-wheel  (Lumber Series) w/ hook mounts, etc., tilt & slide mast w/ side shift, outrigger cylinder 4' forks, no hours showing, 5,500 #, 31X15-50-15 front tires, 31X15.50-15 NHS rear

509
Komatsu FG-30-16 Forklift
triple mast w/ side shift, 2,500 #, LP style gas, S/N A23176

510
Komatsu Forklift
5,000 # , 24,000 hours

510A
2008 International Model 17700
with Wet Kit

510B
#87-2013 Freightliner Truck*
Model Coronado, has approx 625,000 miles, dual exhausts, Headache rack, Aluminum front and rear tires, C15 Cat Engine, empty wt 14,500 GVW 80,000, 230 wheelbase, FRO16210C Transmission, 3:90 Meritor Rear Ratio, Dual fuel Tanks, No Blow By, No oil Leaks, Tire Size Ft & Bk 11R 22.5, Notable Repairs 7/2017 - Mileage 378,450 Engine Rebuilt - Gold Kit! 3/2016 - Mileage 312,739 Installed Eaton Rebuilt Transmission! This Nice Truck is Ready to Roll!

510C
#71 - 2007 Western Star*
Approx 855,000 miles, 14L Detroit Engine, Dual Fual Tanks /20's, FT & BK Aluminum Wheels, 60 sleeper size, Engine Brake, Rear Ratio 3:58, Transmission 13SP, GVW 80,000, Empty WT 16898, Tilt Steering, Cruise Control, Exterior Sunvisor, Air Ride Cab, No Blow By , No Oil Leaks, Notable Repairs 12/2018 - mileage 810,736 replaced All Injectors 12/2017 - mileage 734,269. Good Working Condition!

510D
#60 - 2006 Kenworth T800 Truck*
Has 60" Sleeper, Headache Rack, Approx 1,370,000 on Truck, C15 A Cert Engine, Engine Brake, Tilt Steering, Cruise Control, Exterior Sunvisor, Air Ride Cab, Front & Back Aluminum Wheels, 11R 22.5 Tires, Dual Fuel Tanks/ 20's, Air Slide 5th Wheel, Empty WT 17,500, GVW 80,000, Transmission 10 SP, Rear Ratio 3:55, No Blow By, No Oil Leak, Notable Repairs; 11/2016 - mileagen 1,150,000 - Rebuilt Transmission, 10/2017 - mileage - 1,227,405 Injectors installed By CAT, 4/2019 - Mileage - 1,341,087 - Rebuilt back rear 3:55 Ratio, Good Working Condition!

510E
*1989 Ford LNT8000 Truck, VIN # 1FDYW82AXKVA10641
with log bed/ dual tandem axle, with cab mount knuckle boom 
loader super nice set up  sawing in the woods

510F
Head Ache Rack*
7' x 68" , Aluminum, Excellent Condition

511
Army Truck
operating (forwarder), VIN 05A-89977-C127-10794, inspected property 1971

512
Army Truck
for parts

513
Chevy 70 Fire Truck, V-8
VIN 1GBL7DIE5CV117448, Atlas controls pumping system 1,000 gallon Model Brute II, S/N 0491, 10-00R20 tires 90%

514
2013 Ford F-450 Service Truck
w/ utility bed (running boards), VIN 1F))W4HT8DEA76512 (no tools)

515
Ford Flatbed
yard truck / no headlights, 96,310 mileage meter (no back window), 16' bed w/ 4'4" removable sides, VIN 1FDHF70H8CVA49470

516
ITI Walking Floor Trailer
1996, 45' long, VIN 1Z92F4520TT029134

516A
53' Van Trailer
Year 1990, GVWR 65,000 

517
*Flatbed Manac
45' Legend SD, 2016 Model 10248C001F, Spread Axle, VIN 5MC124816H5164127, Excellent 11R 22.5

518
*Drop Deck Trailer
48' Tri Axle Tandem Wheel, 8.25-15 Tires

519
*Flatbed Fruehauf
45' Model SRGT553SP, VIN FW88400

519A
2007 Great Dane Flatbed
FB7527 - Combo - 48' x 96" Good Working Con

519B
2007 Great Dane Flatbed
FB7599 - Combo - 48' x 96" Good Working Condition

519C
1999 Utility Flatbed
FB20 - Combo - 48 x 102" Good Working Con

519D
LT08 1997 Sun Log Trailer
Good Working Con

519E
LT12 1998 Home Made Log Trailer
Good Working Con

519F
LT14 1998 Home Made Log Trailer
Good Working Con

519G
LT21 1997 Pitts Log Trailer
6 Pin Good Working Con

519H
LT35 2004 Pitts Log Trailer
Good Working Con

519I
LT36 2004 Pitts Log Trailer
Good Working Con

519J
LT37 2004 Pitts Log Trailer
Good Working Con

519K
Log Bunks*
210 " x 96" , 8- removable post, Excellent Condition

520
Woods Mower
PRD8400 84" 3-point finish mower, Like New

521
70' Fairbanks Platform Scales
w/ Avery Weightronics digital readout & electronic main frame, last inspection before removal 3/19, Model 10248C0017, S/N 12481645164127  The controls
and load cells are in the galvanized building on top of the hill.  in a crate.  

522
Hydro-Axe 321 Feller Buncher*
3-Wheel, Shear Head, 28L Tires, 17,745 hrs, Good Running Condition

523
1997 Tigercat 726 Feller Buncher*
ser#7260852, 5700 Head, 8598 hrs, New Center Pin, Good Condition

524
2016 John Deere 848L Log Grapple Skidder*
skidder comes w/winch, machine has total of 5067 hrs, Complete New Engine has Only 1667 hrs on it. Two new 35.5 Primex Tires, Sells with low Reserve!

525
1999 International 4700 T 444E*
Vin 1HTSCABN4YH289365, 243,910 MILES, Tires at 40%, Runs and Drives,

526
Franklin Trailer Mover*
Runs great, Detroit 453 Engine, 1930 hrs,

527
Ford 3910 Tractor*
ss EA87812, Enclosed Cab, Runs good Rear tires at 60%,

800
*Treated Lumber
To Be Broken out in packs as announced Pieces are counted
8X8X18 and 16'
6X8X16'
6X6X16,12"
1X6 X 16', 14', 12', and 10'  
 

810

811

812

814

815

816

817

819

820

821

822

824

825

826

827

828

829

831

833

834

835

836

837

838

839

841

843

844

853

854

855

856