Woodworking Equipment Sale for Rémi Nas de Tourris - Barrie
Previous Page Listing ID#: 188929

Auction Location
Barrie, ON L4M 6M8
Full Address Available on Saturday, May 2
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Sunday May 3
Bidding Ends: Thursday May 7
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Rapid-Sell c/o David Moore & Associates Inc.

Website: www.mooreandassociates.on.ca

GoToAuction.com ID#: 5077
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Terms and Conditions - To Bid and Buy REGISTRATION & IDENTIFICATION: At the time of registration, we collect information about you to verify who you are before you can bid. We collect credit card information to ensure that you are a qualified buyer. All bidders must be of legal age to bid. PAYING FOR YOUR PURCHASES: There is no cost to register for an auction. Your credit card will not be charged unless you win. When an auction closes, if you are the winner, we will charge your credit card with the winning bid amount, plus applicable Buyers Premium and taxes, as stated in terms of auction. Credit Cards include Visa and Mastercard only. REVIEWING YOUR BIDS: During an auction you can check the status of your bids at anytime. Note that no bids can be withdrawn after the auction for any reason. All items are sold as is, where is, with all faults. BIDDING NOTIFICATIONS: You can choose to be notified by e-mail during the auction if you have been outbid. Please note that outbid notifications are NOT sent out during the last two hours of the sale. WINNING NOTIFICATION & INVOICING: All winning bidders will receive an e-mail with an attached invoice from sales@rapid-sell.ca the morning after the auction closes. If you'd like to know whether you won a lot at the close of the auction, check your "bidder history" -- if it says "you will be notified" that means you are the high bidder on the lot. If you are not the high bidder, it will say "you have been outbid." PICKUPS & REMOVALS: Dates and times for pickup will be posted on our website. We do not ship. Do not bid if you are unable to have your items picked up. Any item not picked up during the posted pickup times will be considered an abandoned item. Items are sold as is, where is, with all faults. If you abandon or fail to pick up an item, your credit card will be charged for the purchase price of the item plus a minimum administration fee of $25 plus labour and trucking fees to remove the purchased items from the auction site during the scheduled pickup time. CONDITIONS OF ITEMS SOLD & OUR ONLINE CATALOGUE: Our best efforts are made to represent all items accurately in descriptions and photographs; however, all items are ultimately sold on an 'as is, where is' basis, with all faults. We strongly encourage all bidders to personally verify the condition of each item during the scheduled preview times. No responsibility is assumed by Rapid Sell or the seller for any errors or omissions. CLAIMS: No claims regarding goods purchased will be allowed. Bidders are reminded that all goods are sold on an 'as is, where is' basis, with all faults. PERSONAL & PROPERTY RISKS: We will not be liable for damage or injury to individuals or their property. ADDITIONS & DELETIONS: We reserve the right to remove and/or add lots and/or items to the sale at any point during the auction. BUYERS: The BUYER expressly agrees to indemnify and save Rapid Sell, the Seller and their assigns harmless from and against all claims, losses, expenses, damage or liability, directly or indirectly caused by or resulting from an act, including the negligent acts or omissions of Rapid Sell, or anyone acting in his/her behalf in connection with or arising out of auction. All bidders/buyers must be of legal age. RESERVE: Seldom are items sold with Reserve. If an item is being sold with a reserve, it will be clearly marked and identified. For items sold with a 'reserve', you will be required to pay a minimum amount in order to win the item. AUCTION RECORDS: In the unlikely event of a dispute, you agree to accept as true the information that we have in our records. SOFT CLOSE: Items close at regular intervals. To prevent a bidder from 'sniping', all bids made in the last minute of the auction will force an item to stay open for an additional 3 minutes. This will continue until all bidding has ceased. Most of our auction lots close in 10 second intervals. In other words, if an auction has 100 lots and is scheduled to close at 9:00 p.m., the first lot will close at 9:00 pm (soft close in effect) while the 100th lot will close at approx. 9:16 p.m. (soft close in effect). STRATEGY: We recommend that ALL BIDDERS put in their maximum bid when placing a bid online. This does not mean you will have to pay the amount you bid; you only pay one bid more than the next highest bid, and only up to your maximum bid. The software system will play out the bids as you would at a live auction and only uses the funds required to beat out the under-bidder at the prescribed bid increment. CATALOGUE ERRORS & OMISSIONS: If a description does not match a picture in a lot, the description takes precedence. All items are sold on an 'as is, where is' basis, with all faults. EMAIL COMMUNICATIONS: As per Canada's new anti-spam legislation (effective date July 1, 2014), we are required to secure your consent to communicate with you electronically. By registering for this auction, you are opting in to receive auction notices from Rapid-Sell.ca (sales@rapid-sell.ca). You may withdraw your consent at any time by clicking on the unsubscribe link contained within each auction notice. Your privacy is important to us -- your email address will not be shared with any other party. By bidding you are acknowledging agreement with the terms above.Do not bid unless you agree to all of these terms.
Listing Information

201
Ryobi 10" Table Saw System
- 83" x 43" x 45" as currently configured - a precision system for the demanding woodcrafter - variety of insert plates as pictured - 39" x 22" table top to saw - saw table includes slider as well as router mounts - can be easily disassembled for tra...

1
AUCTION DETAILS - PLEASE READ
Bidding Opens: Sunday April 5th, 2020 at 12:00 noon Bidding Begins to Close: Thursday April 9th, 2020 at 8:00 pm (soft close in effect) Preview Date/Time: Wednesday April 8th, 2020 from 2:00 pm - 5:00 pm at 14 Crompton Drive, Barrie, ON Checkout Date...

201
AUCTION DETAILS - PLEASE READ
Bidding Opens: Sunday May 3rd, 2020 at 12:00 noon Bidding Begins to Close: Thursday May 7th, 2020 at 8:00 pm (soft close in effect) Preview Date/Time: Wednesday May 6th, 2020 from 2:00 pm - 5:00 pm at 14 Crompton Drive, Barrie, ON by appointment only...

202
Ulmia Woodworker's Bench
- 100" x 34" x 33", 4" top - solid beech construction - woodworking vise on side & end - with 4 metals & assorted wooden dogs - various accessories & work lamp - top lifts off for transport **Heavy, bring your help to move & load**

203
Ridgid Planer
- model TP13002, 13" thickness planer - includes rolling stand & 4" hose to connect to dust collection system - with 2 spare 13" blades - footprint 25 1/4" x 20 1/4" x 55"t **Bring your help to move & load**

204
Craftex 6" Jointer
- model B706N - 3450 rpm, 110/220, currently 110 - with spare blades, rolling base & 4" hose to connect to dust collection system - footprint 47" x 17" x 41 1/2"t **Bring your help to move & load**

205
Bandsaw Sander
- Craftsman LR16012, model 113.24330C - 1 hp, 12", 2 wheels - works with blades 1/8" to 1/2" - includes 6 spare blades, new in package - rolling base & 2" hose to connect to dust collection system - footprint 23" x 40" x 67"h **Bring your help to mov...

206
Radial Drill Press
- Craftex 34", model CT020, 5 speed - single phase, 1/2 hp motor, 1725 rpm - includes rolling base (contents of drawers sold separately) & work lamp - base 21 1/2" x 24 1/4", 58"h **Bring your help to move & load**

207
Dewalt 20" Scroll Saw
- model EW788, 400-1750 spm - includes assortment of new blades, crown & skip tooth - with work lamp & stationary base - footprint 19" x 36" x 47"h **Bring your help to move & load**

208
Shopsmith Inc. 6" Belt Sander
- belt 6" x 48", 750 to 2100 rpm - range table tilt, 0 to 20º into belt, 45º away from belt, table size 6" x 9" - back up plate 6" to 16 1/2", 14" above table - 3" diam., rubber drive drum, 3/4 hp motor **Bring your help to move & load**

209
Craftex Dust Extractor
- model FM230, 1hp, single phase, 3450 rpm, 4' hose - footprint 15" x 25 1/2" x 54 1/2"h - with spare collection bags, cloth & polypropylene **Bring your help to move & load**

210
Rolling Stand
- adjustable height, 2 swivel & 2 fixed casters - footprint 19" x 19"

211
Woodworker's Bench
- perfect for smaller projects - work space 30 1/2" x 19" x work height 32" - 2 drawers for tool storage & shelf **Bring your help to move & load**

212
Woodworkers Cabinet
- tool storage with work surface - 12 narrow drawers, on casters - 20" x 20 1/4" x 38 1/4" - contents of drawers sold separately - same height as table saw in Lot 1, can be used as outfeed table **Bring your help to move & load**

213
Porter Cable Pancake Compressor
- model CPFAC2600P, 6 gallon, 2 hp, 150 psi - 2.6 scfm & 90 psi - with rolling stand 18 1/4" x 17 1/4" - includes length of hose

214
Rolling Workbench
- 63" x 26 1/2" x 32 1/2" - 8 drawers for tool & supply storage

215
Viel Tools Sander / Grinder
- with assorted sharpening attachments - includes extra sanding belts, assorted grits - stationary cabinet included, contents of drawers sold separately - cabinets with 3 drawers, 48 1/4" x 24 1/4" x 32"

216
Dewalt Heavy Duty Plate Joiner
- model D682-04, 10,000 rpm - with metal storage box

217
Ryobi Detail Biscuit Joiner
- model DBJ50, 19,000 rpm - with assortment of biscuits



220
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

221
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

222
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

223
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

224
Two Bessey Bar Clamps
- approx. 48" overall length - model KR3.540

225
Two Bessey Bar Clamps
- approx. 48" overall length - model KR3.540

226
One Bessey Bar Clamp
- approx. 48" overall length - model KR3.540

227
Four Jorgensen Bar Clamps
- model 3736 - approx. 40" overall, approx. 37" clamping capacity

228
Four Jorgensen Bar Clamps
- model 3736 - approx. 40" overall, approx. 37" clamping capacity




232
Three C Clamps
- Brink & Cotton and Craftsman, 6"

233
C Clamps
- two 4" & two 3" Craftsman - two 2 1/2" Fuller - one 3" C clamp

234
Corner & 3 Way Clamps
- 2 Craftsman corner clamps, No. 9-6661 - four 3 way clamps, B & C #42430



237
Bar Clamps
- two 12", two 6", unknown brand

238
Jorgensen Bar Clamps
- 2 model 3706, approx. 6" - 2 model 1623, 3" - plus Stanley Handyman, approx. 6"

239
Ratcheting Action & Quick Clamps
- 4 Mastercraft ratcheting action - approx. 16 quick clamps

240
Four Bessey KP Blocks
- perfect accessory for 4 corner framing - hold cross-stack clamps in position and provide surface at each corner to support work

241
Assortment of Clamps
- C clamps, clamp stands/supports, work stands & more

242
Veritas 4 Way Speed Clamp
- fastest adjusting frame clamp - includes 4 corners (glass filled nylon with brass inserts), 4 speed clamping nuts & four 1/4-20 threaded rods - clamps up to 23" - includes extension set to increase clamping capacity to 4" square or 65" x 23"

243
4 Way Speed Clamp
- adjusting frame clamp - 4 aluminum corners, 8 threaded 18" rods - clamps up to 38" x 38"

244
Veritas Shelf Drilling Jig
- eliminates layout work associated with installing shelf supports - includes jig rails, register pins, clamp rods, bush carrier & bushings

245
Workshop Needs
- wrought iron look shelving unit, 4 tin shelves fixed height, 36 1/4" x 9 1/4" x 47 1/2" - includes contents, partial containers sliding compound, finishing wax, contact cement cleaner, chalk, glue & more

246
Rolling Workstand Plus
- 20" x 27 1/4" x 31", lower drawer & shelf

247
Abrasives
- sheets & drums, various grits

248
Norbex Mitre Box
- with saw, model 202, Swedish made - includes spare blades shown

249
Jointer Plane
- West German made E.C.E. - approx. 23 1/2" x 3" - beech body, iron wood sole - includes wooden storage box

250
Jointer Plane
- West German made E.C.E. - approx. 23 1/2" x 3" - beech body, iron wood sole - includes wooden storage box

251
Antique Router Plane
- Stanley No. 71 with straight or curved fence - includes 3 blades

252
Veritas Router Plane
- O5P38.01 - with fence & 4 blades 1/8" to 1/2"

253
Cabinet Maker's Scraping Plane
- Lie Nielsen, L-N 85 - approx. 8 1/4" x 2"

254
E.C.E. Jack Plane
- Primus Dappel Hobel, No. 703p - hornbeam body & lignum vitae sole

255
E.C.E. Jack Plane
- red beech body & hornbeam sole, No. 1035

256
Ulmia Rabbet Plane
- red beech body & hornbeam sole, 48mm

257
E.C.E. Smooth Plane
- red beech body & hornbeam sole, 48mm

258
Ulmia Jack Plane
- red beech body & hornbeam sole, 48mm

259
Ulmia Boys Plane
- red beech body & sole, approx. 1 1/8"

260
E.C.E The Pocket
- adjustable block plate, #694P, approx. 1 1/2" - hornbeam body & lignum vitae sole

261
E.C.E. Corner Plane
- hornbeam construction, approx. 1 3/8"

262
Ulmia Rabbet Plane
- adjustable mouth, hornbeam construction - approx. 1 1/8"

263
Ulmia Rabbet Plane
- adjustable mouth, hornbeam construction - 13"l

264
E.C.E. Jack Plane
- red beech body & sole, 17"l, 2" blade

265
E.C.E. Scrub Plane
- red beech body, hornbeam sole - approx. 1 1/4"

266
E.C.E. Coffin Type Smooth Plane
- red beech body & sole, approx. 2"

267
Record Combination Plane
- No. 050C, with case of blades

268
Record Plough Plane
- No. 044C, with case of blades

269
Jack Plane
- similar to Stanley No. 5, approx. 14" x 2"

270
Antique Shaping Planes
- 3 in total, nicely refinished, ready for display

271
Veritas Block Plane
- approx. 5 1/2" x 1 1/4"

272
Crown Tools Marking / Mortising Gauge
- standard rosewood gauge

273
Ulmia Marking / Mortising Gauge
- deluxe rosewood gauge

274
Spokeshave & Marking Gauge
- Record spokeshave, No. A151 - rosewood marking gauge, Crown Tools

275
Spokeshave & Plane Hammer
- Record spokeshave, No. A151 - Lee Valley plane hammer, brass head, 8 oz.

276
Spokeshave & Marking Gauge
- Stanley spokeshave, No. 151 - beech marking gauge

277
Wood Marking Gauge
- rosewood fence & beam, brass hardware, stainless steel scale

278
Scraper Holder & Scrapers
- Veritas scraper holder - holds any thickness of scraper up to 6"l - glass filled nylon body with brass fittings - plus approx. 15 milled scrapers

279
Veritas Scraping Plane Insert
- converts any plane 2" or wider into accurate scraping plane (Record, Stanley, Footprint)

280
Incra Gauges
- 2 high quality Incra gauges - original Incra jig - Incra 1G32 saw gauges

281
Marples Bevel Chisels
- 5 pc. set, 1", 3/4", 1/2", 3/8", 1/4"

282
Sandvik Bevel Chisels
- 4 pc. set, 1", 3/4", 1/2", 1/4"

283
Marples Bevel Chisels
- Marple Ridgway 4 pc. set - 1", 3/4", 1/2", 1/4"

284
Lee Valley Chisels
- left & right skew, approx. 1"

285
Bevel Chisel Set
- Husky 6 pc., 1 1/2', 1", 3/4", two 1/2", 1/4"

286
Marples Mortising Chisels
- 3 pc. set, 1/2", 3/8", 1/4"

287
Pattern Makers Gouge & Paring Chisels
- Henry Taylor Diamic paring chisel, 1 1/4' - Buck Bros gouge, 3/8" - Buck Bros paring chisel, 1/4"

288
Gouges
- Mifer, 1 1/32", 1/4"

289
Burnishers & Clamp
- Veritas, BluCan Austria & other burnishers - clamp for sharpening chisels, use with vise to give softer grip

290
Specialty Knives
- German & Swedish made draw knives - 10" & 4 1/2" blades

291
Stanley Draw Saw
- double sided blade, model 20-313, approx. 4 1/2"

292
Craftex Pocket Hole Guide
- similar to Kreg Jig - dual guides are adjustable and allow for spacing from 1 1/4" to 2 1/2" - with drill bit & screwdriver bits

293
Craftex Panhead Self Tapping Screws
- for use with Lot 292 - 1 1/4" coarse thread, approx. 600 count

294
Craftex Panhead Self Tapping Screws
- for use with Lot 292 - 1 1/4" fine thread, approx. 800 count

295
Cabinets With Drawers
- 2 units, partially completed, with drawer fronts (not attached), add the top of your choice and finish to taste - 20" x 15" x 21 3/4" - quality construction to this point

296
Matching Sawhorses
- 2 units, nicely crafted - 32"w x approx. 24"h

297
Matching Sawhorses
- 2 units, nicely crafted - 32"w x approx. 24"h

298
Milwaukee Sawzall
- heavy duty orbital, cat # 6521 series, 11 amp - in hard body case - working condition - includes 1 new spare blade

299
Dinmar Canada Dado Set
- carbide tipped, 6" diam., 18 teeth - with Veritas dado shim set

300
Craftex Wood Mortising Attachment Chisel
- mortising attachment for drill presses & 4 chisels, 1/4", 3/8", 1/2", 5/8" plus 1 additional 3/8" chisel bit

301
Kreg Automaxx Wood Project Clamp
- 6" reach, auto adjusts for material thickness up to 5"

302
Jigsaw & Sander
- Makita jigsaw, model 4322, working, with spare blades as shown - Black & Decker finishing sander, 1/4 sheet, orbital action, in working order

303
Doweling Jig
- Stanley No. 59, kit appears to be complete

304
Magnetic Base
- a helping hand when needed, 60 kg pull standard - in original box

305
Transfer Punches
- 28 pc. set, from 3/32" to 1/2"

306
Porter Cable Brad Nailer
- model BN200A, with hard body case - includes brad nails as shown

307
Woodcarvers Mallet
- Marples, beech, 5"

308
Woodcarvers Mallets
- Marples plus one other - beech, 4 1/2" - experienced 7 1/2" with soft wood head

309
Six Hammers
- various styles & uses - Vaughan 16oz. carpenters hammers - upholstery tack hammer - plus other specialized hammers

310
Clamping Mitre Sled
- also know as mitre gauge - with hand controlled clamp, 3/4" slide bar

311
Drill Press Vise
- 4" jaw, up to 4" capacity, quick release jaw

312
Lie-Nielsen Dowel Plate
- accurately size dowels

313
Dial Indicator Plus
- Crafter Dial Indicator, 1/0" x .001" - circular saw blade stabilizer

314
Carpenters Squares
- Footprint, Sheffield England - No. 1248 - 7 1/2" & 12 1/2"

315
Accuracy Counts
- Veritas dividing rule - Veritas squares, 12" & 6" - General multi tool, see photos - 5 pcs. in total

316
Combination Squares
- 2 rules, 4 heads, includes 1 centre finding head

317
Combination Square Plus
- Ashinwa bevel - CCNL creator toolbox protractor - 6" & 12" combination squares - slide with cast protractor head

318
Precision Measuring
- brass caliper, takes outside measurements up to 4" & inside measurements 1/4" to 4" - bulls eye centre finder, 3/8" & 1/2" - calipers & compass

319
Inside & Outside Measurements
- Union Tool approx. 6 1/2" inside caliper - Millers Falls 8" outside caliper - Groz, approx. 13" diam. - plumb bob & string

320
Caliper, Compasses Plus
- Starrett # 243 firm joint hermaphrodite caliper - Igaging steel rulers, 12" & 6" hooked ruler - compasses, brass bevel gauge

321
Combination Wrenches
- up to 5/16" - 17 in total, Craftsman, Fuller & others - 10" adjustable wrench - thickness gauge - assortment of allen keys

322
Pliers & Multi Tools
- 10WR vise grips, wire strippers, plumbing wrenches, tin snips, bionic wrench

323
Mallets & Hammers
- brass headed mallet, 8oz. ball peen, nail puller, wonder bar - small sledge, approx. 1 lb.

324
Files & Rasps
- 7 pcs., 12" to 21" overall lengths, good condition

325
More Files & Rasps
- 15 pcs. in total including a cleaner - variety of shapes & sizes - 8" to 18" overall length

326
MHC Granite Surface Plate
- 12" x 9 1/4" x 2", good condition

327
Slip Stones
- 6 pcs., stored in water

328
Ridgid Outfeed Table
- flip top portable work support, adjustable height, folds for storage

329
Moisture Tester & Humidity Gauge
- digital Acurite temp/humidity meter - Electrophysics moisture tester - both working order

330
Drill Press Vise
- Ford Machinery Supply, # 3, 3 1/4" jaw, 3" capacity


332
Small Parts Bins & Contents
- 3 multi drawer units for hardware & small parts storage - 2 units, 12" x 6 3/4" x 16", 35 drawers - 1 unit, 10 1/2" x 6 1/2" x 9 1/2", 24 drawers - includes contents

333
Shop Supplies & Projects in Progress
- shop towels, WD40, spray adhesive, lubricant - partial containers - includes boat & small drawer unit, 16 1/2"t *Bring your boxes to pack*

334
Live Edge Wood
- 2 joined pieces, pine, approx. 19 1/2" x 38" x 5/8" width

335
Project Wood & Caddy
- mainly pine, oak, variety of sizes, shapes & thickness - great for projects & crafts - caddy 20 1/2" x 16" x 28", on casters

336
Waterloo Tool Cabinet
- 2 pc. unit, with key - bottom section, 5 drawers, 26 1/2" x 14" x 32" - top section, 5 drawers, 26" x 12" x 17 1/2" - on casters, 2 fixed & 2 swivel

337
Four Handsaws
- Tyzack, No. 120, mitre saw - Nicholson mitre saw & cross cut handsaw - Craftsman

338
Five Specialty Saw
- Sharksaw pull saw, fine cut double saw, 9 1/2" - coping saw, keyhole saw, hacksaw, pull saw

339
Ulmia Bowsaw
- approx. 34" including handles - 23 1/2" blade

340
Wilh Putsch Sager Bowsaw
- approx. 27 1/2" blade, 38"l including handles - includes 4 blades

341
Drawing Bow & Marking Scribe
- Lee Valley drawing bow, 48" - marking scribe, mounted to 31 1/2" board

342
Straight Edges & Rulers
- 2 straight edges, 60 & 100cm - 18" centre finding ruler - True-Angle by Quinte Measuring Tools - plus other rulers

343
Antique Tools
- Stanley & Millers Falls hand braces

344
Swivel Vise
- combination anvil & vise - Craftsman No. 391.5180 - 4" jaw with magnetic jaw pads

345
Bench Top Anvil
- approx. 12" x 4" x 4"

346
Level & Square
- 48" aluminum level, all glass good - 2 framing squares, 12" x 16" & 24" x 16"

347
Keep It Level
- Starrett 24", glass is good - 28" A Tool Mfg. Co, glass is good - Craftsman torpedo level, 9", glass is good

348
Bar Gauge Heads Plus
- bar gauge heads with pre cut bars - aluminum cutting guide - Sears Cutters Edge II

349
Shaper Blades
- 13 sets of blades, plus holder

350
Craftex Forstner Bit Set
- 16 pcs. from 1/4" to 2 1/8" - complete with box

351
Forstner Bits
- 7 pc. set from 1/4" to 1" - 4 others, 1/4", 3/8", 1/2" & 1 1/2" Freud

352
Circle Cutter & Hole Screws
- Craftsman 1/4" round shank circle cutter, 7/8" to 4", brass, wood or plastic - Dissten hole saws - 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2" plus mandrel - sanding wheels as shown

353
Brad Point & Countersink Bits
- Fullers 7 pc. brad point drill bit set, 1/8" to 1/2" - Craftex 7 pc. brad point drill bit set, 1/8" to 1/2" - plus assorted countersink bits

354
Wood Boring Bits & Others
- 2 sets spade bits - Craftsman 6 pc. set, 3/8" to 1" - Task 6 pc. set, 3/8" to 1" - Benchmark metal drill bit box, contents included

355
Expansive Wood Bits Plus
- Irwin expansive wood bits, auger bits, ratcheting screwdrivers with bits, screwdriver starter set, dimpler

356
Nail Sets & More
- porter cable accessory set, has been opened, some fitting are missing - Craftsman rechargeable screwdriver - assortment of nail sets - chain saw file - Record 909 pliers & more

357
Saw Blades
- two 10" blades, one has been resharpened - includes spare saw blade holder

358
Angle Jig
- for table saw, 24"

359
Screwdrivers, Blades & Wedges
- collection of screwdrivers, scraper blades, wedges

360
Five Fingerboards
- Shopsmith, Craftsman & others

361
Measure & Mark
- Mite-R-Gauge, The Original True Angle, curve guides, tape measures, chalk line, plumb line, knives, pens & more

362
Useful Shop Items
- hatchet, band clamp, new in package glue roller bottle, flashlight, wire brushes & more

363
Bases, Patterns & More
- 2 heavy metal bases, 7 3/4" x 9 1/4" - templates, patterns & safety glasses

364
Assorted Jigs & Fingerboards
- workshop crafted & designed, see photos

365
Cobex Shop Vac
- model 315, with attachments shown - in working order

366
Noma Oil Filled Radiator
- model EW7707CMN, 1500w, 14" x 10" x 25" - tested & working

367
Project Lumber
- ash boards, 9 boards, clear, kiln dried - three 6 1/2" to 7"w, 7'l - six 5 1/2" to 7 1/2"w, 8'l

368
Project Lumber
- 10 cherry boards, approx. 10"w, eight 50"l, two 100"l - 4 pine boards, approx. 10"w x 8'l - knots are tight, kiln dried - plus additional oak flooring pieces, unfinished

369
Workshop Cabinet
- workshop designed & crafted sturdy 8 drawer unit - 26 1/4" x 14" x 48" - contents in drawers & on top included

370
Shop Supplies
- paint brushes, dowel pins, small clamps & more

371
Sharpening Assortment
- blade holders, sharpening stones, Diamond sharpening system - lots of value here

372
Anti Stress Mats
- 2 units, both approx. 24" x 34"

373
Fasteners & Casters
- fixed & swivel casters - includes 2 swivel sets, new in package - self tapping screws, deck screws - magnetic catches for cabinets

500
DO YOU HAVE ITEMS TO SELL?
At Rapid-Sell, we do auctions of all kinds, from estate and farm sales to downsizings to business retirement auctions and even real estate! If you or someone you know would like more information about having an auction, give Rapid-Sell a call at 519-...

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Woodworking Equipment Sale for Rémi Nas de Tourris - Barrie

Rapid-Sell c/o David Moore & Associates Inc.

Rapid-Sell c/o David Moore & Associates Inc.


Contact:
Phone:
Sale Location
Barrie, ON L4M 6M8
Full Address Available after 9 am
on Saturday, May 2
Sale Dates and Times
Sale Terms and Conditions
Terms and Conditions - To Bid and Buy REGISTRATION & IDENTIFICATION: At the time of registration, we collect information about you to verify who you are before you can bid. We collect credit card information to ensure that you are a qualified buyer. All bidders must be of legal age to bid. PAYING FOR YOUR PURCHASES: There is no cost to register for an auction. Your credit card will not be charged unless you win. When an auction closes, if you are the winner, we will charge your credit card with the winning bid amount, plus applicable Buyers Premium and taxes, as stated in terms of auction. Credit Cards include Visa and Mastercard only. REVIEWING YOUR BIDS: During an auction you can check the status of your bids at anytime. Note that no bids can be withdrawn after the auction for any reason. All items are sold as is, where is, with all faults. BIDDING NOTIFICATIONS: You can choose to be notified by e-mail during the auction if you have been outbid. Please note that outbid notifications are NOT sent out during the last two hours of the sale. WINNING NOTIFICATION & INVOICING: All winning bidders will receive an e-mail with an attached invoice from sales@rapid-sell.ca the morning after the auction closes. If you'd like to know whether you won a lot at the close of the auction, check your "bidder history" -- if it says "you will be notified" that means you are the high bidder on the lot. If you are not the high bidder, it will say "you have been outbid." PICKUPS & REMOVALS: Dates and times for pickup will be posted on our website. We do not ship. Do not bid if you are unable to have your items picked up. Any item not picked up during the posted pickup times will be considered an abandoned item. Items are sold as is, where is, with all faults. If you abandon or fail to pick up an item, your credit card will be charged for the purchase price of the item plus a minimum administration fee of $25 plus labour and trucking fees to remove the purchased items from the auction site during the scheduled pickup time. CONDITIONS OF ITEMS SOLD & OUR ONLINE CATALOGUE: Our best efforts are made to represent all items accurately in descriptions and photographs; however, all items are ultimately sold on an 'as is, where is' basis, with all faults. We strongly encourage all bidders to personally verify the condition of each item during the scheduled preview times. No responsibility is assumed by Rapid Sell or the seller for any errors or omissions. CLAIMS: No claims regarding goods purchased will be allowed. Bidders are reminded that all goods are sold on an 'as is, where is' basis, with all faults. PERSONAL & PROPERTY RISKS: We will not be liable for damage or injury to individuals or their property. ADDITIONS & DELETIONS: We reserve the right to remove and/or add lots and/or items to the sale at any point during the auction. BUYERS: The BUYER expressly agrees to indemnify and save Rapid Sell, the Seller and their assigns harmless from and against all claims, losses, expenses, damage or liability, directly or indirectly caused by or resulting from an act, including the negligent acts or omissions of Rapid Sell, or anyone acting in his/her behalf in connection with or arising out of auction. All bidders/buyers must be of legal age. RESERVE: Seldom are items sold with Reserve. If an item is being sold with a reserve, it will be clearly marked and identified. For items sold with a 'reserve', you will be required to pay a minimum amount in order to win the item. AUCTION RECORDS: In the unlikely event of a dispute, you agree to accept as true the information that we have in our records. SOFT CLOSE: Items close at regular intervals. To prevent a bidder from 'sniping', all bids made in the last minute of the auction will force an item to stay open for an additional 3 minutes. This will continue until all bidding has ceased. Most of our auction lots close in 10 second intervals. In other words, if an auction has 100 lots and is scheduled to close at 9:00 p.m., the first lot will close at 9:00 pm (soft close in effect) while the 100th lot will close at approx. 9:16 p.m. (soft close in effect). STRATEGY: We recommend that ALL BIDDERS put in their maximum bid when placing a bid online. This does not mean you will have to pay the amount you bid; you only pay one bid more than the next highest bid, and only up to your maximum bid. The software system will play out the bids as you would at a live auction and only uses the funds required to beat out the under-bidder at the prescribed bid increment. CATALOGUE ERRORS & OMISSIONS: If a description does not match a picture in a lot, the description takes precedence. All items are sold on an 'as is, where is' basis, with all faults. EMAIL COMMUNICATIONS: As per Canada's new anti-spam legislation (effective date July 1, 2014), we are required to secure your consent to communicate with you electronically. By registering for this auction, you are opting in to receive auction notices from Rapid-Sell.ca (sales@rapid-sell.ca). You may withdraw your consent at any time by clicking on the unsubscribe link contained within each auction notice. Your privacy is important to us -- your email address will not be shared with any other party. By bidding you are acknowledging agreement with the terms above.Do not bid unless you agree to all of these terms.
Listing Details

201
Ryobi 10" Table Saw System
- 83" x 43" x 45" as currently configured - a precision system for the demanding woodcrafter - variety of insert plates as pictured - 39" x 22" table top to saw - saw table includes slider as well as router mounts - can be easily disassembled for tra...

1
AUCTION DETAILS - PLEASE READ
Bidding Opens: Sunday April 5th, 2020 at 12:00 noon Bidding Begins to Close: Thursday April 9th, 2020 at 8:00 pm (soft close in effect) Preview Date/Time: Wednesday April 8th, 2020 from 2:00 pm - 5:00 pm at 14 Crompton Drive, Barrie, ON Checkout Date...

201
AUCTION DETAILS - PLEASE READ
Bidding Opens: Sunday May 3rd, 2020 at 12:00 noon Bidding Begins to Close: Thursday May 7th, 2020 at 8:00 pm (soft close in effect) Preview Date/Time: Wednesday May 6th, 2020 from 2:00 pm - 5:00 pm at 14 Crompton Drive, Barrie, ON by appointment only...

202
Ulmia Woodworker's Bench
- 100" x 34" x 33", 4" top - solid beech construction - woodworking vise on side & end - with 4 metals & assorted wooden dogs - various accessories & work lamp - top lifts off for transport **Heavy, bring your help to move & load**

203
Ridgid Planer
- model TP13002, 13" thickness planer - includes rolling stand & 4" hose to connect to dust collection system - with 2 spare 13" blades - footprint 25 1/4" x 20 1/4" x 55"t **Bring your help to move & load**

204
Craftex 6" Jointer
- model B706N - 3450 rpm, 110/220, currently 110 - with spare blades, rolling base & 4" hose to connect to dust collection system - footprint 47" x 17" x 41 1/2"t **Bring your help to move & load**

205
Bandsaw Sander
- Craftsman LR16012, model 113.24330C - 1 hp, 12", 2 wheels - works with blades 1/8" to 1/2" - includes 6 spare blades, new in package - rolling base & 2" hose to connect to dust collection system - footprint 23" x 40" x 67"h **Bring your help to mov...

206
Radial Drill Press
- Craftex 34", model CT020, 5 speed - single phase, 1/2 hp motor, 1725 rpm - includes rolling base (contents of drawers sold separately) & work lamp - base 21 1/2" x 24 1/4", 58"h **Bring your help to move & load**

207
Dewalt 20" Scroll Saw
- model EW788, 400-1750 spm - includes assortment of new blades, crown & skip tooth - with work lamp & stationary base - footprint 19" x 36" x 47"h **Bring your help to move & load**

208
Shopsmith Inc. 6" Belt Sander
- belt 6" x 48", 750 to 2100 rpm - range table tilt, 0 to 20º into belt, 45º away from belt, table size 6" x 9" - back up plate 6" to 16 1/2", 14" above table - 3" diam., rubber drive drum, 3/4 hp motor **Bring your help to move & load**

209
Craftex Dust Extractor
- model FM230, 1hp, single phase, 3450 rpm, 4' hose - footprint 15" x 25 1/2" x 54 1/2"h - with spare collection bags, cloth & polypropylene **Bring your help to move & load**

210
Rolling Stand
- adjustable height, 2 swivel & 2 fixed casters - footprint 19" x 19"

211
Woodworker's Bench
- perfect for smaller projects - work space 30 1/2" x 19" x work height 32" - 2 drawers for tool storage & shelf **Bring your help to move & load**

212
Woodworkers Cabinet
- tool storage with work surface - 12 narrow drawers, on casters - 20" x 20 1/4" x 38 1/4" - contents of drawers sold separately - same height as table saw in Lot 1, can be used as outfeed table **Bring your help to move & load**

213
Porter Cable Pancake Compressor
- model CPFAC2600P, 6 gallon, 2 hp, 150 psi - 2.6 scfm & 90 psi - with rolling stand 18 1/4" x 17 1/4" - includes length of hose

214
Rolling Workbench
- 63" x 26 1/2" x 32 1/2" - 8 drawers for tool & supply storage

215
Viel Tools Sander / Grinder
- with assorted sharpening attachments - includes extra sanding belts, assorted grits - stationary cabinet included, contents of drawers sold separately - cabinets with 3 drawers, 48 1/4" x 24 1/4" x 32"

216
Dewalt Heavy Duty Plate Joiner
- model D682-04, 10,000 rpm - with metal storage box

217
Ryobi Detail Biscuit Joiner
- model DBJ50, 19,000 rpm - with assortment of biscuits



220
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

221
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

222
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

223
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

224
Two Bessey Bar Clamps
- approx. 48" overall length - model KR3.540

225
Two Bessey Bar Clamps
- approx. 48" overall length - model KR3.540

226
One Bessey Bar Clamp
- approx. 48" overall length - model KR3.540

227
Four Jorgensen Bar Clamps
- model 3736 - approx. 40" overall, approx. 37" clamping capacity

228
Four Jorgensen Bar Clamps
- model 3736 - approx. 40" overall, approx. 37" clamping capacity




232
Three C Clamps
- Brink & Cotton and Craftsman, 6"

233
C Clamps
- two 4" & two 3" Craftsman - two 2 1/2" Fuller - one 3" C clamp

234
Corner & 3 Way Clamps
- 2 Craftsman corner clamps, No. 9-6661 - four 3 way clamps, B & C #42430



237
Bar Clamps
- two 12", two 6", unknown brand

238
Jorgensen Bar Clamps
- 2 model 3706, approx. 6" - 2 model 1623, 3" - plus Stanley Handyman, approx. 6"

239
Ratcheting Action & Quick Clamps
- 4 Mastercraft ratcheting action - approx. 16 quick clamps

240
Four Bessey KP Blocks
- perfect accessory for 4 corner framing - hold cross-stack clamps in position and provide surface at each corner to support work

241
Assortment of Clamps
- C clamps, clamp stands/supports, work stands & more

242
Veritas 4 Way Speed Clamp
- fastest adjusting frame clamp - includes 4 corners (glass filled nylon with brass inserts), 4 speed clamping nuts & four 1/4-20 threaded rods - clamps up to 23" - includes extension set to increase clamping capacity to 4" square or 65" x 23"

243
4 Way Speed Clamp
- adjusting frame clamp - 4 aluminum corners, 8 threaded 18" rods - clamps up to 38" x 38"

244
Veritas Shelf Drilling Jig
- eliminates layout work associated with installing shelf supports - includes jig rails, register pins, clamp rods, bush carrier & bushings

245
Workshop Needs
- wrought iron look shelving unit, 4 tin shelves fixed height, 36 1/4" x 9 1/4" x 47 1/2" - includes contents, partial containers sliding compound, finishing wax, contact cement cleaner, chalk, glue & more

246
Rolling Workstand Plus
- 20" x 27 1/4" x 31", lower drawer & shelf

247
Abrasives
- sheets & drums, various grits

248
Norbex Mitre Box
- with saw, model 202, Swedish made - includes spare blades shown

249
Jointer Plane
- West German made E.C.E. - approx. 23 1/2" x 3" - beech body, iron wood sole - includes wooden storage box

250
Jointer Plane
- West German made E.C.E. - approx. 23 1/2" x 3" - beech body, iron wood sole - includes wooden storage box

251
Antique Router Plane
- Stanley No. 71 with straight or curved fence - includes 3 blades

252
Veritas Router Plane
- O5P38.01 - with fence & 4 blades 1/8" to 1/2"

253
Cabinet Maker's Scraping Plane
- Lie Nielsen, L-N 85 - approx. 8 1/4" x 2"

254
E.C.E. Jack Plane
- Primus Dappel Hobel, No. 703p - hornbeam body & lignum vitae sole

255
E.C.E. Jack Plane
- red beech body & hornbeam sole, No. 1035

256
Ulmia Rabbet Plane
- red beech body & hornbeam sole, 48mm

257
E.C.E. Smooth Plane
- red beech body & hornbeam sole, 48mm

258
Ulmia Jack Plane
- red beech body & hornbeam sole, 48mm

259
Ulmia Boys Plane
- red beech body & sole, approx. 1 1/8"

260
E.C.E The Pocket
- adjustable block plate, #694P, approx. 1 1/2" - hornbeam body & lignum vitae sole

261
E.C.E. Corner Plane
- hornbeam construction, approx. 1 3/8"

262
Ulmia Rabbet Plane
- adjustable mouth, hornbeam construction - approx. 1 1/8"

263
Ulmia Rabbet Plane
- adjustable mouth, hornbeam construction - 13"l

264
E.C.E. Jack Plane
- red beech body & sole, 17"l, 2" blade

265
E.C.E. Scrub Plane
- red beech body, hornbeam sole - approx. 1 1/4"

266
E.C.E. Coffin Type Smooth Plane
- red beech body & sole, approx. 2"

267
Record Combination Plane
- No. 050C, with case of blades

268
Record Plough Plane
- No. 044C, with case of blades

269
Jack Plane
- similar to Stanley No. 5, approx. 14" x 2"

270
Antique Shaping Planes
- 3 in total, nicely refinished, ready for display

271
Veritas Block Plane
- approx. 5 1/2" x 1 1/4"

272
Crown Tools Marking / Mortising Gauge
- standard rosewood gauge

273
Ulmia Marking / Mortising Gauge
- deluxe rosewood gauge

274
Spokeshave & Marking Gauge
- Record spokeshave, No. A151 - rosewood marking gauge, Crown Tools

275
Spokeshave & Plane Hammer
- Record spokeshave, No. A151 - Lee Valley plane hammer, brass head, 8 oz.

276
Spokeshave & Marking Gauge
- Stanley spokeshave, No. 151 - beech marking gauge

277
Wood Marking Gauge
- rosewood fence & beam, brass hardware, stainless steel scale

278
Scraper Holder & Scrapers
- Veritas scraper holder - holds any thickness of scraper up to 6"l - glass filled nylon body with brass fittings - plus approx. 15 milled scrapers

279
Veritas Scraping Plane Insert
- converts any plane 2" or wider into accurate scraping plane (Record, Stanley, Footprint)

280
Incra Gauges
- 2 high quality Incra gauges - original Incra jig - Incra 1G32 saw gauges

281
Marples Bevel Chisels
- 5 pc. set, 1", 3/4", 1/2", 3/8", 1/4"

282
Sandvik Bevel Chisels
- 4 pc. set, 1", 3/4", 1/2", 1/4"

283
Marples Bevel Chisels
- Marple Ridgway 4 pc. set - 1", 3/4", 1/2", 1/4"

284
Lee Valley Chisels
- left & right skew, approx. 1"

285
Bevel Chisel Set
- Husky 6 pc., 1 1/2', 1", 3/4", two 1/2", 1/4"

286
Marples Mortising Chisels
- 3 pc. set, 1/2", 3/8", 1/4"

287
Pattern Makers Gouge & Paring Chisels
- Henry Taylor Diamic paring chisel, 1 1/4' - Buck Bros gouge, 3/8" - Buck Bros paring chisel, 1/4"

288
Gouges
- Mifer, 1 1/32", 1/4"

289
Burnishers & Clamp
- Veritas, BluCan Austria & other burnishers - clamp for sharpening chisels, use with vise to give softer grip

290
Specialty Knives
- German & Swedish made draw knives - 10" & 4 1/2" blades

291
Stanley Draw Saw
- double sided blade, model 20-313, approx. 4 1/2"

292
Craftex Pocket Hole Guide
- similar to Kreg Jig - dual guides are adjustable and allow for spacing from 1 1/4" to 2 1/2" - with drill bit & screwdriver bits

293
Craftex Panhead Self Tapping Screws
- for use with Lot 292 - 1 1/4" coarse thread, approx. 600 count

294
Craftex Panhead Self Tapping Screws
- for use with Lot 292 - 1 1/4" fine thread, approx. 800 count

295
Cabinets With Drawers
- 2 units, partially completed, with drawer fronts (not attached), add the top of your choice and finish to taste - 20" x 15" x 21 3/4" - quality construction to this point

296
Matching Sawhorses
- 2 units, nicely crafted - 32"w x approx. 24"h

297
Matching Sawhorses
- 2 units, nicely crafted - 32"w x approx. 24"h

298
Milwaukee Sawzall
- heavy duty orbital, cat # 6521 series, 11 amp - in hard body case - working condition - includes 1 new spare blade

299
Dinmar Canada Dado Set
- carbide tipped, 6" diam., 18 teeth - with Veritas dado shim set

300
Craftex Wood Mortising Attachment Chisel
- mortising attachment for drill presses & 4 chisels, 1/4", 3/8", 1/2", 5/8" plus 1 additional 3/8" chisel bit

301
Kreg Automaxx Wood Project Clamp
- 6" reach, auto adjusts for material thickness up to 5"

302
Jigsaw & Sander
- Makita jigsaw, model 4322, working, with spare blades as shown - Black & Decker finishing sander, 1/4 sheet, orbital action, in working order

303
Doweling Jig
- Stanley No. 59, kit appears to be complete

304
Magnetic Base
- a helping hand when needed, 60 kg pull standard - in original box

305
Transfer Punches
- 28 pc. set, from 3/32" to 1/2"

306
Porter Cable Brad Nailer
- model BN200A, with hard body case - includes brad nails as shown

307
Woodcarvers Mallet
- Marples, beech, 5"

308
Woodcarvers Mallets
- Marples plus one other - beech, 4 1/2" - experienced 7 1/2" with soft wood head

309
Six Hammers
- various styles & uses - Vaughan 16oz. carpenters hammers - upholstery tack hammer - plus other specialized hammers

310
Clamping Mitre Sled
- also know as mitre gauge - with hand controlled clamp, 3/4" slide bar

311
Drill Press Vise
- 4" jaw, up to 4" capacity, quick release jaw

312
Lie-Nielsen Dowel Plate
- accurately size dowels

313
Dial Indicator Plus
- Crafter Dial Indicator, 1/0" x .001" - circular saw blade stabilizer

314
Carpenters Squares
- Footprint, Sheffield England - No. 1248 - 7 1/2" & 12 1/2"

315
Accuracy Counts
- Veritas dividing rule - Veritas squares, 12" & 6" - General multi tool, see photos - 5 pcs. in total

316
Combination Squares
- 2 rules, 4 heads, includes 1 centre finding head

317
Combination Square Plus
- Ashinwa bevel - CCNL creator toolbox protractor - 6" & 12" combination squares - slide with cast protractor head

318
Precision Measuring
- brass caliper, takes outside measurements up to 4" & inside measurements 1/4" to 4" - bulls eye centre finder, 3/8" & 1/2" - calipers & compass

319
Inside & Outside Measurements
- Union Tool approx. 6 1/2" inside caliper - Millers Falls 8" outside caliper - Groz, approx. 13" diam. - plumb bob & string

320
Caliper, Compasses Plus
- Starrett # 243 firm joint hermaphrodite caliper - Igaging steel rulers, 12" & 6" hooked ruler - compasses, brass bevel gauge

321
Combination Wrenches
- up to 5/16" - 17 in total, Craftsman, Fuller & others - 10" adjustable wrench - thickness gauge - assortment of allen keys

322
Pliers & Multi Tools
- 10WR vise grips, wire strippers, plumbing wrenches, tin snips, bionic wrench

323
Mallets & Hammers
- brass headed mallet, 8oz. ball peen, nail puller, wonder bar - small sledge, approx. 1 lb.

324
Files & Rasps
- 7 pcs., 12" to 21" overall lengths, good condition

325
More Files & Rasps
- 15 pcs. in total including a cleaner - variety of shapes & sizes - 8" to 18" overall length

326
MHC Granite Surface Plate
- 12" x 9 1/4" x 2", good condition

327
Slip Stones
- 6 pcs., stored in water

328
Ridgid Outfeed Table
- flip top portable work support, adjustable height, folds for storage

329
Moisture Tester & Humidity Gauge
- digital Acurite temp/humidity meter - Electrophysics moisture tester - both working order

330
Drill Press Vise
- Ford Machinery Supply, # 3, 3 1/4" jaw, 3" capacity


332
Small Parts Bins & Contents
- 3 multi drawer units for hardware & small parts storage - 2 units, 12" x 6 3/4" x 16", 35 drawers - 1 unit, 10 1/2" x 6 1/2" x 9 1/2", 24 drawers - includes contents

333
Shop Supplies & Projects in Progress
- shop towels, WD40, spray adhesive, lubricant - partial containers - includes boat & small drawer unit, 16 1/2"t *Bring your boxes to pack*

334
Live Edge Wood
- 2 joined pieces, pine, approx. 19 1/2" x 38" x 5/8" width

335
Project Wood & Caddy
- mainly pine, oak, variety of sizes, shapes & thickness - great for projects & crafts - caddy 20 1/2" x 16" x 28", on casters

336
Waterloo Tool Cabinet
- 2 pc. unit, with key - bottom section, 5 drawers, 26 1/2" x 14" x 32" - top section, 5 drawers, 26" x 12" x 17 1/2" - on casters, 2 fixed & 2 swivel

337
Four Handsaws
- Tyzack, No. 120, mitre saw - Nicholson mitre saw & cross cut handsaw - Craftsman

338
Five Specialty Saw
- Sharksaw pull saw, fine cut double saw, 9 1/2" - coping saw, keyhole saw, hacksaw, pull saw

339
Ulmia Bowsaw
- approx. 34" including handles - 23 1/2" blade

340
Wilh Putsch Sager Bowsaw
- approx. 27 1/2" blade, 38"l including handles - includes 4 blades

341
Drawing Bow & Marking Scribe
- Lee Valley drawing bow, 48" - marking scribe, mounted to 31 1/2" board

342
Straight Edges & Rulers
- 2 straight edges, 60 & 100cm - 18" centre finding ruler - True-Angle by Quinte Measuring Tools - plus other rulers

343
Antique Tools
- Stanley & Millers Falls hand braces

344
Swivel Vise
- combination anvil & vise - Craftsman No. 391.5180 - 4" jaw with magnetic jaw pads

345
Bench Top Anvil
- approx. 12" x 4" x 4"

346
Level & Square
- 48" aluminum level, all glass good - 2 framing squares, 12" x 16" & 24" x 16"

347
Keep It Level
- Starrett 24", glass is good - 28" A Tool Mfg. Co, glass is good - Craftsman torpedo level, 9", glass is good

348
Bar Gauge Heads Plus
- bar gauge heads with pre cut bars - aluminum cutting guide - Sears Cutters Edge II

349
Shaper Blades
- 13 sets of blades, plus holder

350
Craftex Forstner Bit Set
- 16 pcs. from 1/4" to 2 1/8" - complete with box

351
Forstner Bits
- 7 pc. set from 1/4" to 1" - 4 others, 1/4", 3/8", 1/2" & 1 1/2" Freud

352
Circle Cutter & Hole Screws
- Craftsman 1/4" round shank circle cutter, 7/8" to 4", brass, wood or plastic - Dissten hole saws - 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2" plus mandrel - sanding wheels as shown

353
Brad Point & Countersink Bits
- Fullers 7 pc. brad point drill bit set, 1/8" to 1/2" - Craftex 7 pc. brad point drill bit set, 1/8" to 1/2" - plus assorted countersink bits

354
Wood Boring Bits & Others
- 2 sets spade bits - Craftsman 6 pc. set, 3/8" to 1" - Task 6 pc. set, 3/8" to 1" - Benchmark metal drill bit box, contents included

355
Expansive Wood Bits Plus
- Irwin expansive wood bits, auger bits, ratcheting screwdrivers with bits, screwdriver starter set, dimpler

356
Nail Sets & More
- porter cable accessory set, has been opened, some fitting are missing - Craftsman rechargeable screwdriver - assortment of nail sets - chain saw file - Record 909 pliers & more

357
Saw Blades
- two 10" blades, one has been resharpened - includes spare saw blade holder

358
Angle Jig
- for table saw, 24"

359
Screwdrivers, Blades & Wedges
- collection of screwdrivers, scraper blades, wedges

360
Five Fingerboards
- Shopsmith, Craftsman & others

361
Measure & Mark
- Mite-R-Gauge, The Original True Angle, curve guides, tape measures, chalk line, plumb line, knives, pens & more

362
Useful Shop Items
- hatchet, band clamp, new in package glue roller bottle, flashlight, wire brushes & more

363
Bases, Patterns & More
- 2 heavy metal bases, 7 3/4" x 9 1/4" - templates, patterns & safety glasses

364
Assorted Jigs & Fingerboards
- workshop crafted & designed, see photos

365
Cobex Shop Vac
- model 315, with attachments shown - in working order

366
Noma Oil Filled Radiator
- model EW7707CMN, 1500w, 14" x 10" x 25" - tested & working

367
Project Lumber
- ash boards, 9 boards, clear, kiln dried - three 6 1/2" to 7"w, 7'l - six 5 1/2" to 7 1/2"w, 8'l

368
Project Lumber
- 10 cherry boards, approx. 10"w, eight 50"l, two 100"l - 4 pine boards, approx. 10"w x 8'l - knots are tight, kiln dried - plus additional oak flooring pieces, unfinished

369
Workshop Cabinet
- workshop designed & crafted sturdy 8 drawer unit - 26 1/4" x 14" x 48" - contents in drawers & on top included

370
Shop Supplies
- paint brushes, dowel pins, small clamps & more

371
Sharpening Assortment
- blade holders, sharpening stones, Diamond sharpening system - lots of value here

372
Anti Stress Mats
- 2 units, both approx. 24" x 34"

373
Fasteners & Casters
- fixed & swivel casters - includes 2 swivel sets, new in package - self tapping screws, deck screws - magnetic catches for cabinets

500
DO YOU HAVE ITEMS TO SELL?
At Rapid-Sell, we do auctions of all kinds, from estate and farm sales to downsizings to business retirement auctions and even real estate! If you or someone you know would like more information about having an auction, give Rapid-Sell a call at 519-...

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Woodworking Equipment Sale for Rémi Nas de Tourris - Barrie
 Online Only Auction
Auction Date(s)
Bidding Starts: Sunday May 3
Bidding Ends: Thursday May 7
Auction Location
Barrie, ON L4M 6M8
Full Address Available on Saturday, May 2
Company
Rapid-Sell c/o David Moore & Associates Inc.

Website: www.mooreandassociates.on.ca

Listing Terms and Conditions
Terms and Conditions - To Bid and Buy REGISTRATION & IDENTIFICATION: At the time of registration, we collect information about you to verify who you are before you can bid. We collect credit card information to ensure that you are a qualified buyer. All bidders must be of legal age to bid. PAYING FOR YOUR PURCHASES: There is no cost to register for an auction. Your credit card will not be charged unless you win. When an auction closes, if you are the winner, we will charge your credit card with the winning bid amount, plus applicable Buyers Premium and taxes, as stated in terms of auction. Credit Cards include Visa and Mastercard only. REVIEWING YOUR BIDS: During an auction you can check the status of your bids at anytime. Note that no bids can be withdrawn after the auction for any reason. All items are sold as is, where is, with all faults. BIDDING NOTIFICATIONS: You can choose to be notified by e-mail during the auction if you have been outbid. Please note that outbid notifications are NOT sent out during the last two hours of the sale. WINNING NOTIFICATION & INVOICING: All winning bidders will receive an e-mail with an attached invoice from sales@rapid-sell.ca the morning after the auction closes. If you'd like to know whether you won a lot at the close of the auction, check your "bidder history" -- if it says "you will be notified" that means you are the high bidder on the lot. If you are not the high bidder, it will say "you have been outbid." PICKUPS & REMOVALS: Dates and times for pickup will be posted on our website. We do not ship. Do not bid if you are unable to have your items picked up. Any item not picked up during the posted pickup times will be considered an abandoned item. Items are sold as is, where is, with all faults. If you abandon or fail to pick up an item, your credit card will be charged for the purchase price of the item plus a minimum administration fee of $25 plus labour and trucking fees to remove the purchased items from the auction site during the scheduled pickup time. CONDITIONS OF ITEMS SOLD & OUR ONLINE CATALOGUE: Our best efforts are made to represent all items accurately in descriptions and photographs; however, all items are ultimately sold on an 'as is, where is' basis, with all faults. We strongly encourage all bidders to personally verify the condition of each item during the scheduled preview times. No responsibility is assumed by Rapid Sell or the seller for any errors or omissions. CLAIMS: No claims regarding goods purchased will be allowed. Bidders are reminded that all goods are sold on an 'as is, where is' basis, with all faults. PERSONAL & PROPERTY RISKS: We will not be liable for damage or injury to individuals or their property. ADDITIONS & DELETIONS: We reserve the right to remove and/or add lots and/or items to the sale at any point during the auction. BUYERS: The BUYER expressly agrees to indemnify and save Rapid Sell, the Seller and their assigns harmless from and against all claims, losses, expenses, damage or liability, directly or indirectly caused by or resulting from an act, including the negligent acts or omissions of Rapid Sell, or anyone acting in his/her behalf in connection with or arising out of auction. All bidders/buyers must be of legal age. RESERVE: Seldom are items sold with Reserve. If an item is being sold with a reserve, it will be clearly marked and identified. For items sold with a 'reserve', you will be required to pay a minimum amount in order to win the item. AUCTION RECORDS: In the unlikely event of a dispute, you agree to accept as true the information that we have in our records. SOFT CLOSE: Items close at regular intervals. To prevent a bidder from 'sniping', all bids made in the last minute of the auction will force an item to stay open for an additional 3 minutes. This will continue until all bidding has ceased. Most of our auction lots close in 10 second intervals. In other words, if an auction has 100 lots and is scheduled to close at 9:00 p.m., the first lot will close at 9:00 pm (soft close in effect) while the 100th lot will close at approx. 9:16 p.m. (soft close in effect). STRATEGY: We recommend that ALL BIDDERS put in their maximum bid when placing a bid online. This does not mean you will have to pay the amount you bid; you only pay one bid more than the next highest bid, and only up to your maximum bid. The software system will play out the bids as you would at a live auction and only uses the funds required to beat out the under-bidder at the prescribed bid increment. CATALOGUE ERRORS & OMISSIONS: If a description does not match a picture in a lot, the description takes precedence. All items are sold on an 'as is, where is' basis, with all faults. EMAIL COMMUNICATIONS: As per Canada's new anti-spam legislation (effective date July 1, 2014), we are required to secure your consent to communicate with you electronically. By registering for this auction, you are opting in to receive auction notices from Rapid-Sell.ca (sales@rapid-sell.ca). You may withdraw your consent at any time by clicking on the unsubscribe link contained within each auction notice. Your privacy is important to us -- your email address will not be shared with any other party. By bidding you are acknowledging agreement with the terms above.Do not bid unless you agree to all of these terms.

201
Ryobi 10" Table Saw System
- 83" x 43" x 45" as currently configured - a precision system for the demanding woodcrafter - variety of insert plates as pictured - 39" x 22" table top to saw - saw table includes slider as well as router mounts - can be easily disassembled for tra...

1
AUCTION DETAILS - PLEASE READ
Bidding Opens: Sunday April 5th, 2020 at 12:00 noon Bidding Begins to Close: Thursday April 9th, 2020 at 8:00 pm (soft close in effect) Preview Date/Time: Wednesday April 8th, 2020 from 2:00 pm - 5:00 pm at 14 Crompton Drive, Barrie, ON Checkout Date...

201
AUCTION DETAILS - PLEASE READ
Bidding Opens: Sunday May 3rd, 2020 at 12:00 noon Bidding Begins to Close: Thursday May 7th, 2020 at 8:00 pm (soft close in effect) Preview Date/Time: Wednesday May 6th, 2020 from 2:00 pm - 5:00 pm at 14 Crompton Drive, Barrie, ON by appointment only...

202
Ulmia Woodworker's Bench
- 100" x 34" x 33", 4" top - solid beech construction - woodworking vise on side & end - with 4 metals & assorted wooden dogs - various accessories & work lamp - top lifts off for transport **Heavy, bring your help to move & load**

203
Ridgid Planer
- model TP13002, 13" thickness planer - includes rolling stand & 4" hose to connect to dust collection system - with 2 spare 13" blades - footprint 25 1/4" x 20 1/4" x 55"t **Bring your help to move & load**

204
Craftex 6" Jointer
- model B706N - 3450 rpm, 110/220, currently 110 - with spare blades, rolling base & 4" hose to connect to dust collection system - footprint 47" x 17" x 41 1/2"t **Bring your help to move & load**

205
Bandsaw Sander
- Craftsman LR16012, model 113.24330C - 1 hp, 12", 2 wheels - works with blades 1/8" to 1/2" - includes 6 spare blades, new in package - rolling base & 2" hose to connect to dust collection system - footprint 23" x 40" x 67"h **Bring your help to mov...

206
Radial Drill Press
- Craftex 34", model CT020, 5 speed - single phase, 1/2 hp motor, 1725 rpm - includes rolling base (contents of drawers sold separately) & work lamp - base 21 1/2" x 24 1/4", 58"h **Bring your help to move & load**

207
Dewalt 20" Scroll Saw
- model EW788, 400-1750 spm - includes assortment of new blades, crown & skip tooth - with work lamp & stationary base - footprint 19" x 36" x 47"h **Bring your help to move & load**

208
Shopsmith Inc. 6" Belt Sander
- belt 6" x 48", 750 to 2100 rpm - range table tilt, 0 to 20º into belt, 45º away from belt, table size 6" x 9" - back up plate 6" to 16 1/2", 14" above table - 3" diam., rubber drive drum, 3/4 hp motor **Bring your help to move & load**

209
Craftex Dust Extractor
- model FM230, 1hp, single phase, 3450 rpm, 4' hose - footprint 15" x 25 1/2" x 54 1/2"h - with spare collection bags, cloth & polypropylene **Bring your help to move & load**

210
Rolling Stand
- adjustable height, 2 swivel & 2 fixed casters - footprint 19" x 19"

211
Woodworker's Bench
- perfect for smaller projects - work space 30 1/2" x 19" x work height 32" - 2 drawers for tool storage & shelf **Bring your help to move & load**

212
Woodworkers Cabinet
- tool storage with work surface - 12 narrow drawers, on casters - 20" x 20 1/4" x 38 1/4" - contents of drawers sold separately - same height as table saw in Lot 1, can be used as outfeed table **Bring your help to move & load**

213
Porter Cable Pancake Compressor
- model CPFAC2600P, 6 gallon, 2 hp, 150 psi - 2.6 scfm & 90 psi - with rolling stand 18 1/4" x 17 1/4" - includes length of hose

214
Rolling Workbench
- 63" x 26 1/2" x 32 1/2" - 8 drawers for tool & supply storage

215
Viel Tools Sander / Grinder
- with assorted sharpening attachments - includes extra sanding belts, assorted grits - stationary cabinet included, contents of drawers sold separately - cabinets with 3 drawers, 48 1/4" x 24 1/4" x 32"

216
Dewalt Heavy Duty Plate Joiner
- model D682-04, 10,000 rpm - with metal storage box

217
Ryobi Detail Biscuit Joiner
- model DBJ50, 19,000 rpm - with assortment of biscuits

218

219

220
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

221
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

222
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

223
Two Pipe Clamps
- 48", 3/4" pipe, Pony 5003

224
Two Bessey Bar Clamps
- approx. 48" overall length - model KR3.540

225
Two Bessey Bar Clamps
- approx. 48" overall length - model KR3.540

226
One Bessey Bar Clamp
- approx. 48" overall length - model KR3.540

227
Four Jorgensen Bar Clamps
- model 3736 - approx. 40" overall, approx. 37" clamping capacity

228
Four Jorgensen Bar Clamps
- model 3736 - approx. 40" overall, approx. 37" clamping capacity

229

230

231

232
Three C Clamps
- Brink & Cotton and Craftsman, 6"

233
C Clamps
- two 4" & two 3" Craftsman - two 2 1/2" Fuller - one 3" C clamp

234
Corner & 3 Way Clamps
- 2 Craftsman corner clamps, No. 9-6661 - four 3 way clamps, B & C #42430

235

236

237
Bar Clamps
- two 12", two 6", unknown brand

238
Jorgensen Bar Clamps
- 2 model 3706, approx. 6" - 2 model 1623, 3" - plus Stanley Handyman, approx. 6"

239
Ratcheting Action & Quick Clamps
- 4 Mastercraft ratcheting action - approx. 16 quick clamps

240
Four Bessey KP Blocks
- perfect accessory for 4 corner framing - hold cross-stack clamps in position and provide surface at each corner to support work

241
Assortment of Clamps
- C clamps, clamp stands/supports, work stands & more

242
Veritas 4 Way Speed Clamp
- fastest adjusting frame clamp - includes 4 corners (glass filled nylon with brass inserts), 4 speed clamping nuts & four 1/4-20 threaded rods - clamps up to 23" - includes extension set to increase clamping capacity to 4" square or 65" x 23"

243
4 Way Speed Clamp
- adjusting frame clamp - 4 aluminum corners, 8 threaded 18" rods - clamps up to 38" x 38"

244
Veritas Shelf Drilling Jig
- eliminates layout work associated with installing shelf supports - includes jig rails, register pins, clamp rods, bush carrier & bushings

245
Workshop Needs
- wrought iron look shelving unit, 4 tin shelves fixed height, 36 1/4" x 9 1/4" x 47 1/2" - includes contents, partial containers sliding compound, finishing wax, contact cement cleaner, chalk, glue & more

246
Rolling Workstand Plus
- 20" x 27 1/4" x 31", lower drawer & shelf

247
Abrasives
- sheets & drums, various grits

248
Norbex Mitre Box
- with saw, model 202, Swedish made - includes spare blades shown

249
Jointer Plane
- West German made E.C.E. - approx. 23 1/2" x 3" - beech body, iron wood sole - includes wooden storage box

250
Jointer Plane
- West German made E.C.E. - approx. 23 1/2" x 3" - beech body, iron wood sole - includes wooden storage box

251
Antique Router Plane
- Stanley No. 71 with straight or curved fence - includes 3 blades

252
Veritas Router Plane
- O5P38.01 - with fence & 4 blades 1/8" to 1/2"

253
Cabinet Maker's Scraping Plane
- Lie Nielsen, L-N 85 - approx. 8 1/4" x 2"

254
E.C.E. Jack Plane
- Primus Dappel Hobel, No. 703p - hornbeam body & lignum vitae sole

255
E.C.E. Jack Plane
- red beech body & hornbeam sole, No. 1035

256
Ulmia Rabbet Plane
- red beech body & hornbeam sole, 48mm

257
E.C.E. Smooth Plane
- red beech body & hornbeam sole, 48mm

258
Ulmia Jack Plane
- red beech body & hornbeam sole, 48mm

259
Ulmia Boys Plane
- red beech body & sole, approx. 1 1/8"

260
E.C.E The Pocket
- adjustable block plate, #694P, approx. 1 1/2" - hornbeam body & lignum vitae sole

261
E.C.E. Corner Plane
- hornbeam construction, approx. 1 3/8"

262
Ulmia Rabbet Plane
- adjustable mouth, hornbeam construction - approx. 1 1/8"

263
Ulmia Rabbet Plane
- adjustable mouth, hornbeam construction - 13"l

264
E.C.E. Jack Plane
- red beech body & sole, 17"l, 2" blade

265
E.C.E. Scrub Plane
- red beech body, hornbeam sole - approx. 1 1/4"

266
E.C.E. Coffin Type Smooth Plane
- red beech body & sole, approx. 2"

267
Record Combination Plane
- No. 050C, with case of blades

268
Record Plough Plane
- No. 044C, with case of blades

269
Jack Plane
- similar to Stanley No. 5, approx. 14" x 2"

270
Antique Shaping Planes
- 3 in total, nicely refinished, ready for display

271
Veritas Block Plane
- approx. 5 1/2" x 1 1/4"

272
Crown Tools Marking / Mortising Gauge
- standard rosewood gauge

273
Ulmia Marking / Mortising Gauge
- deluxe rosewood gauge

274
Spokeshave & Marking Gauge
- Record spokeshave, No. A151 - rosewood marking gauge, Crown Tools

275
Spokeshave & Plane Hammer
- Record spokeshave, No. A151 - Lee Valley plane hammer, brass head, 8 oz.

276
Spokeshave & Marking Gauge
- Stanley spokeshave, No. 151 - beech marking gauge

277
Wood Marking Gauge
- rosewood fence & beam, brass hardware, stainless steel scale

278
Scraper Holder & Scrapers
- Veritas scraper holder - holds any thickness of scraper up to 6"l - glass filled nylon body with brass fittings - plus approx. 15 milled scrapers

279
Veritas Scraping Plane Insert
- converts any plane 2" or wider into accurate scraping plane (Record, Stanley, Footprint)

280
Incra Gauges
- 2 high quality Incra gauges - original Incra jig - Incra 1G32 saw gauges

281
Marples Bevel Chisels
- 5 pc. set, 1", 3/4", 1/2", 3/8", 1/4"

282
Sandvik Bevel Chisels
- 4 pc. set, 1", 3/4", 1/2", 1/4"

283
Marples Bevel Chisels
- Marple Ridgway 4 pc. set - 1", 3/4", 1/2", 1/4"

284
Lee Valley Chisels
- left & right skew, approx. 1"

285
Bevel Chisel Set
- Husky 6 pc., 1 1/2', 1", 3/4", two 1/2", 1/4"

286
Marples Mortising Chisels
- 3 pc. set, 1/2", 3/8", 1/4"

287
Pattern Makers Gouge & Paring Chisels
- Henry Taylor Diamic paring chisel, 1 1/4' - Buck Bros gouge, 3/8" - Buck Bros paring chisel, 1/4"

288
Gouges
- Mifer, 1 1/32", 1/4"

289
Burnishers & Clamp
- Veritas, BluCan Austria & other burnishers - clamp for sharpening chisels, use with vise to give softer grip

290
Specialty Knives
- German & Swedish made draw knives - 10" & 4 1/2" blades

291
Stanley Draw Saw
- double sided blade, model 20-313, approx. 4 1/2"

292
Craftex Pocket Hole Guide
- similar to Kreg Jig - dual guides are adjustable and allow for spacing from 1 1/4" to 2 1/2" - with drill bit & screwdriver bits

293
Craftex Panhead Self Tapping Screws
- for use with Lot 292 - 1 1/4" coarse thread, approx. 600 count

294
Craftex Panhead Self Tapping Screws
- for use with Lot 292 - 1 1/4" fine thread, approx. 800 count

295
Cabinets With Drawers
- 2 units, partially completed, with drawer fronts (not attached), add the top of your choice and finish to taste - 20" x 15" x 21 3/4" - quality construction to this point

296
Matching Sawhorses
- 2 units, nicely crafted - 32"w x approx. 24"h

297
Matching Sawhorses
- 2 units, nicely crafted - 32"w x approx. 24"h

298
Milwaukee Sawzall
- heavy duty orbital, cat # 6521 series, 11 amp - in hard body case - working condition - includes 1 new spare blade

299
Dinmar Canada Dado Set
- carbide tipped, 6" diam., 18 teeth - with Veritas dado shim set

300
Craftex Wood Mortising Attachment Chisel
- mortising attachment for drill presses & 4 chisels, 1/4", 3/8", 1/2", 5/8" plus 1 additional 3/8" chisel bit

301
Kreg Automaxx Wood Project Clamp
- 6" reach, auto adjusts for material thickness up to 5"

302
Jigsaw & Sander
- Makita jigsaw, model 4322, working, with spare blades as shown - Black & Decker finishing sander, 1/4 sheet, orbital action, in working order

303
Doweling Jig
- Stanley No. 59, kit appears to be complete

304
Magnetic Base
- a helping hand when needed, 60 kg pull standard - in original box

305
Transfer Punches
- 28 pc. set, from 3/32" to 1/2"

306
Porter Cable Brad Nailer
- model BN200A, with hard body case - includes brad nails as shown

307
Woodcarvers Mallet
- Marples, beech, 5"

308
Woodcarvers Mallets
- Marples plus one other - beech, 4 1/2" - experienced 7 1/2" with soft wood head

309
Six Hammers
- various styles & uses - Vaughan 16oz. carpenters hammers - upholstery tack hammer - plus other specialized hammers

310
Clamping Mitre Sled
- also know as mitre gauge - with hand controlled clamp, 3/4" slide bar

311
Drill Press Vise
- 4" jaw, up to 4" capacity, quick release jaw

312
Lie-Nielsen Dowel Plate
- accurately size dowels

313
Dial Indicator Plus
- Crafter Dial Indicator, 1/0" x .001" - circular saw blade stabilizer

314
Carpenters Squares
- Footprint, Sheffield England - No. 1248 - 7 1/2" & 12 1/2"

315
Accuracy Counts
- Veritas dividing rule - Veritas squares, 12" & 6" - General multi tool, see photos - 5 pcs. in total

316
Combination Squares
- 2 rules, 4 heads, includes 1 centre finding head

317
Combination Square Plus
- Ashinwa bevel - CCNL creator toolbox protractor - 6" & 12" combination squares - slide with cast protractor head

318
Precision Measuring
- brass caliper, takes outside measurements up to 4" & inside measurements 1/4" to 4" - bulls eye centre finder, 3/8" & 1/2" - calipers & compass

319
Inside & Outside Measurements
- Union Tool approx. 6 1/2" inside caliper - Millers Falls 8" outside caliper - Groz, approx. 13" diam. - plumb bob & string

320
Caliper, Compasses Plus
- Starrett # 243 firm joint hermaphrodite caliper - Igaging steel rulers, 12" & 6" hooked ruler - compasses, brass bevel gauge

321
Combination Wrenches
- up to 5/16" - 17 in total, Craftsman, Fuller & others - 10" adjustable wrench - thickness gauge - assortment of allen keys

322
Pliers & Multi Tools
- 10WR vise grips, wire strippers, plumbing wrenches, tin snips, bionic wrench

323
Mallets & Hammers
- brass headed mallet, 8oz. ball peen, nail puller, wonder bar - small sledge, approx. 1 lb.

324
Files & Rasps
- 7 pcs., 12" to 21" overall lengths, good condition

325
More Files & Rasps
- 15 pcs. in total including a cleaner - variety of shapes & sizes - 8" to 18" overall length

326
MHC Granite Surface Plate
- 12" x 9 1/4" x 2", good condition

327
Slip Stones
- 6 pcs., stored in water

328
Ridgid Outfeed Table
- flip top portable work support, adjustable height, folds for storage

329
Moisture Tester & Humidity Gauge
- digital Acurite temp/humidity meter - Electrophysics moisture tester - both working order

330
Drill Press Vise
- Ford Machinery Supply, # 3, 3 1/4" jaw, 3" capacity

331

332
Small Parts Bins & Contents
- 3 multi drawer units for hardware & small parts storage - 2 units, 12" x 6 3/4" x 16", 35 drawers - 1 unit, 10 1/2" x 6 1/2" x 9 1/2", 24 drawers - includes contents

333
Shop Supplies & Projects in Progress
- shop towels, WD40, spray adhesive, lubricant - partial containers - includes boat & small drawer unit, 16 1/2"t *Bring your boxes to pack*

334
Live Edge Wood
- 2 joined pieces, pine, approx. 19 1/2" x 38" x 5/8" width

335
Project Wood & Caddy
- mainly pine, oak, variety of sizes, shapes & thickness - great for projects & crafts - caddy 20 1/2" x 16" x 28", on casters

336
Waterloo Tool Cabinet
- 2 pc. unit, with key - bottom section, 5 drawers, 26 1/2" x 14" x 32" - top section, 5 drawers, 26" x 12" x 17 1/2" - on casters, 2 fixed & 2 swivel

337
Four Handsaws
- Tyzack, No. 120, mitre saw - Nicholson mitre saw & cross cut handsaw - Craftsman

338
Five Specialty Saw
- Sharksaw pull saw, fine cut double saw, 9 1/2" - coping saw, keyhole saw, hacksaw, pull saw

339
Ulmia Bowsaw
- approx. 34" including handles - 23 1/2" blade

340
Wilh Putsch Sager Bowsaw
- approx. 27 1/2" blade, 38"l including handles - includes 4 blades

341
Drawing Bow & Marking Scribe
- Lee Valley drawing bow, 48" - marking scribe, mounted to 31 1/2" board

342
Straight Edges & Rulers
- 2 straight edges, 60 & 100cm - 18" centre finding ruler - True-Angle by Quinte Measuring Tools - plus other rulers

343
Antique Tools
- Stanley & Millers Falls hand braces

344
Swivel Vise
- combination anvil & vise - Craftsman No. 391.5180 - 4" jaw with magnetic jaw pads

345
Bench Top Anvil
- approx. 12" x 4" x 4"

346
Level & Square
- 48" aluminum level, all glass good - 2 framing squares, 12" x 16" & 24" x 16"

347
Keep It Level
- Starrett 24", glass is good - 28" A Tool Mfg. Co, glass is good - Craftsman torpedo level, 9", glass is good

348
Bar Gauge Heads Plus
- bar gauge heads with pre cut bars - aluminum cutting guide - Sears Cutters Edge II

349
Shaper Blades
- 13 sets of blades, plus holder

350
Craftex Forstner Bit Set
- 16 pcs. from 1/4" to 2 1/8" - complete with box

351
Forstner Bits
- 7 pc. set from 1/4" to 1" - 4 others, 1/4", 3/8", 1/2" & 1 1/2" Freud

352
Circle Cutter & Hole Screws
- Craftsman 1/4" round shank circle cutter, 7/8" to 4", brass, wood or plastic - Dissten hole saws - 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2" plus mandrel - sanding wheels as shown

353
Brad Point & Countersink Bits
- Fullers 7 pc. brad point drill bit set, 1/8" to 1/2" - Craftex 7 pc. brad point drill bit set, 1/8" to 1/2" - plus assorted countersink bits

354
Wood Boring Bits & Others
- 2 sets spade bits - Craftsman 6 pc. set, 3/8" to 1" - Task 6 pc. set, 3/8" to 1" - Benchmark metal drill bit box, contents included

355
Expansive Wood Bits Plus
- Irwin expansive wood bits, auger bits, ratcheting screwdrivers with bits, screwdriver starter set, dimpler

356
Nail Sets & More
- porter cable accessory set, has been opened, some fitting are missing - Craftsman rechargeable screwdriver - assortment of nail sets - chain saw file - Record 909 pliers & more

357
Saw Blades
- two 10" blades, one has been resharpened - includes spare saw blade holder

358
Angle Jig
- for table saw, 24"

359
Screwdrivers, Blades & Wedges
- collection of screwdrivers, scraper blades, wedges

360
Five Fingerboards
- Shopsmith, Craftsman & others

361
Measure & Mark
- Mite-R-Gauge, The Original True Angle, curve guides, tape measures, chalk line, plumb line, knives, pens & more

362
Useful Shop Items
- hatchet, band clamp, new in package glue roller bottle, flashlight, wire brushes & more

363
Bases, Patterns & More
- 2 heavy metal bases, 7 3/4" x 9 1/4" - templates, patterns & safety glasses

364
Assorted Jigs & Fingerboards
- workshop crafted & designed, see photos

365
Cobex Shop Vac
- model 315, with attachments shown - in working order

366
Noma Oil Filled Radiator
- model EW7707CMN, 1500w, 14" x 10" x 25" - tested & working

367
Project Lumber
- ash boards, 9 boards, clear, kiln dried - three 6 1/2" to 7"w, 7'l - six 5 1/2" to 7 1/2"w, 8'l

368
Project Lumber
- 10 cherry boards, approx. 10"w, eight 50"l, two 100"l - 4 pine boards, approx. 10"w x 8'l - knots are tight, kiln dried - plus additional oak flooring pieces, unfinished

369
Workshop Cabinet
- workshop designed & crafted sturdy 8 drawer unit - 26 1/4" x 14" x 48" - contents in drawers & on top included

370
Shop Supplies
- paint brushes, dowel pins, small clamps & more

371
Sharpening Assortment
- blade holders, sharpening stones, Diamond sharpening system - lots of value here

372
Anti Stress Mats
- 2 units, both approx. 24" x 34"

373
Fasteners & Casters
- fixed & swivel casters - includes 2 swivel sets, new in package - self tapping screws, deck screws - magnetic catches for cabinets

500
DO YOU HAVE ITEMS TO SELL?
At Rapid-Sell, we do auctions of all kinds, from estate and farm sales to downsizings to business retirement auctions and even real estate! If you or someone you know would like more information about having an auction, give Rapid-Sell a call at 519-...