31^st Annual Air Works Auction 

* 3 Day Auction *

GPS Location: Mt Hope Auction Grounds; 8076 SR 241 Millersburg OH 44654

Thursday, February 13^th at 9:00 AM 4+ Auction Crews

Friday, February 14^th at 8:30 AM Selling in 12+ Auction Crews

Saturday, February 15^th at 8:30 AM Selling in 12+ Auction Crews

Heavy Equipment * Rolling Stock * Sawmill & Pallet Equipment * Logging Equipment * Power Units * Woodworking * Metalworking * Antiques & Collectibles * Misc. Tools & Equipment

Sawmill/Logging & Pallet Equipment Sells Online/Live Mostly Friday Feb. 14^th

• Sawmills: Like New HMC, MM10 automatic sawmill w/3HB, AC44 w/run around, set works and controls; New AG Trucut 6” band headrig; Brewco fastline super scragg, redone, excellent con.; 2010 Woodmizer LT70 portable bandmill, one owner, fully hyd. w/all the extras, 65 hp Cat engine, 1300 hrs, stored inside; Woodmizer LT70 bandmill, good condition; HD 36” Lumber Tiger Bandmill, model 40hp71596, 40 hp John Deere, 22’ track, 24” opening, power drive and power up & down; Woodmizer LT30 portable bandmill, low hrs, 3HB, lineshaft or electric motor; 2019 Norwood HD36 sawmill, cuts 20 ft. logs, excellent condition;  Portable bandmill, shop built, 18’ track w/10 extension, 26” cap., 13 hp Honda w/electric start on head,  5.5 Honda on hydraulics, complete w/log turner, dogs and stops, good condition;

• Carriages; Cleereman 36” carriage, track, frame & drive, excellent con.; Pierce carriage w/3HB, track, frame, drive, husk and log turner; Frick carriage, hand set, air operated, track & frame, good con.; Frick 01 track and carriage;

• Chippers/Hogs; Morbark Chip-Pac, 48” w/electric motor, 3 knife, in g.c.; Precision Husky 58” chipper w/shaker; Montgomery hog, 45 PMKC, top feed, rebuilt & in excellent con.; Williams 32” hammer hog w/3” screen rebuilt & in excellent con.; West Salem 32” Hammer hog, rebuilt; 2008 Vermeer BC600VL chipper, 27 hp Kohler engine, 110 hrs, excellent condition; Weima wood grinder, WLH Tiger 600, 60 hp, 1400 hrs, 460v 3 ph w/control panel;

• Shaving Mill; Tremzac shaving mill, TZ248, portable, demo unit, low hrs, handles 24” x 8’ logs, hyd. drive, g.c.;

• Edgers; Baker portable edger w/Honda engine, 441 hrs, like new; Corley edger, 4” x 32” w/2 movable blades and infeed table; Meadows 4” x 8” 2 blade edger, 1 blade movable; Edminton 3 blade edger; Frick 27” edger, 2 blades, 1 movable, works good; Weaver 2 blade 27” edger, 1 blade movable, variable speed w/8” drop deck; Woodmizer edger; Crosby 2 blade edger w/1 movable blade, good condition; Woodmizer EG25 edger, 2 blades;

• Resaws; Like New 2019 Woodmizer HR120 resaw, 67 hrs, 25 hp Kohler gas engine; West Plains resaw WPRS-WBS, 14” capacity, lineshaft;  Woodmizer single head resaw w/Honda engine,  like new; Baker single head resaw, BPQ-0, electric drive, excellent con.; Fast Line grade resaw, 16” cap. w/electric motor; Brewer 2000 resaw, Golden Eagle w/run around, 12 x 12, excellent condition; Woodmizer resaw attachment, lineshaft on frame w/S Vickers hyd. pumps25-75 hp and 1 KPM pressure compressor pump; Morgan double head resaw w/run around, electric;

• Trim & Chop Saws; New County Line Equipment 7 x 9 chopsaw, lineshaft ready; Hemco multi trim saw, 9 heads, 8” x 20’ cap. electric drive, g.c.; Brewco fastline, double head trim saw, electric motor; Upcut chop saw, 4” x 6” cap.; Trim saw, 2 blades, up to 16’ w/trash belt conveyor, electric drive, works; CTR buck saw; Baker chop saw w/infeed;  Chop saw, electric motor w/infeed & outfeed; Yates American cut off saw, 3 ph electric motor that mounts on ceiling, outfeed rollers with stops;

• Pallet Equipment; Pallet runner feeder w/like new hyd. unit; 2 = sticker carts, 18” x 40” w/10” sides, hyd. drive, g.c.; Mellinger sticker machine, 2 lift tables, hyd, electric motor w/gearbox drive, from 6’ to 16’ lumber, g.c.; 8’ round stacking table; Pallet stacker; Stutzman double head notcher, 40”  to 144” runners;

• Unscramblers; Cornell 4 chain unscrambler, electric motor w/gearbox drive, g.c.; 3’ to 16’ board unscrambler, 8’ tall, electric drive, g.c.; Round stacking table, 8’ w/electric drive;

• Debarkers; 2011 Mellot 36” debarker, completely rebuilt, excellent con.;

• Log Turners; Frick log turner; Mellot log turner, rough con.;

• Slabwood Saws; New AG Trucut automatic slabwood saw, lineshaft ready; Slabwood cut off saw w/24” blade; 

• Conveyors; 2 = bark conveyors, 30’ and 36’ long, ladder back chain, electric drive, g.c.; Belt conveyor, 34” x 33’ w/6” sides, hyd. drive, rough con.; Belt conveyor, approx.. 18” x 20’ electric drive; Barn sweep only drive is good; belt conveyor, 14” x 20’ no drive, needs work; Bushman Accuglide live rolls 28” x 57’; Bushman Accuglide conveyor 28” x 24’; 2 = belt conveyors, 16” x 24’, hyd driven; Laderal wood transfers, 1^st and 2^nd levels; Mellot vibrating conveyor, 50 ft. long, excellent condition;

• Decks: Green chain, 12’ x 28’, 4 strand, g.c.; Green chain, 5’ x 13’, 2 strand w/hyd drive; Green chain log deck, 28’-3 strand, automated, electric drive; Rollcase, 20” x 17’ hyd drive, g.c.; Mellot 14’ rollcase; Mellot 20’ rollcase; Mellot 3 strand chain transfer deck;

• Hoppers; 5 = New Creek Side hoppers

• Deduster; 2 = Go Fast dedusters, wire brushes, g.c.; Brewco deduster, extra brush, good condition;

• Blowers; Morbark chip blower, electric drive, good condition;  Morbark chip blower, g.c.; 72” dust blower no power, g.c.;  2 = 24” sawdust blowers, rebuilt; 36” dust blower w/16” air lock built on w/3ph 30 hp electric motor, g.c.; 36 “ blower w/12” inlet & 10” outlet; CFW 40 hp chip blower, 460v, excellent condition; Balcor 7.5 hp sawdust blower, 230/440v;

• Firewood Processor:  2017 DYNA SC15 firewood processor w/34 hp Cat diesel, 14’ conveyor, 4” x 6” wedge, 720 hrs, factory refurbished w/ 90 day warranty;

• Misc. Dyna stake pointer; 20 sections pallet racking; Mud cleaner & frame; 2 = 52” sawblades, g.c.; Hyd motor on tank w/pump & 30 hp electric motor; 100 hp electric motor; 30 hp electric motor; Cooksaw dual tooth setter on stand, works good; Hazeldine chamfer, electric motor, g.c.; Newman stringer band router w/new electric motor; Concrete truck frame, ready to set log loader on top to create a 6 wheel transmission forwarder; hyd. unit, 15 hp w/pumps; LP Vaporizer; Hanchett chipper blade sharpener, w/3ph, 3 hp electric motor;

 Metalworking Equipment Sells Mostly Friday Feb. 14^th

Miller Wildcat 225G stick welder, w/S-32P 12 mig welder on top, in running condition; New metal workbenches; Craftsman metal lathe; Lobo copy lathe; Miller Welder, Trailblazer 250G, good condition; 5 ton air operated bridge crane hoist; 100 ton H-frame press, hyd. driven; Pratt & Whitney 2A jig bore, hyd. powered; Like new ½” metal bandsaw;

Building Materials & Sheds Sells Fri. & Sat. Feb. 14^th & 15^th

2 truck loads of misc. lumber and trim; 1 truck load of new windows and doors; 18 new 100 series Anderson windows;  

Contractor Tools & Equipment Sells Fri. & Sat. Feb. 14^th & 15^th

New Magnum 4000 psi steam cleaner; Safway 5’ scaffold bucks and braces, approx.. 50 pcs; Stanley hyd power unit, driven by 18 hp V-twin Vanguard engine, electric start, 289 hrs; Hyd. concrete saw; Electric water pump; 50’ of hyd hose; 10 = 55 gallon drums of Ellis Shore brackets that fit 4 x 4’s; 1 yard concrete bucket; 1/3 yard concrete bucket; 2013 Toro 6 cu. ft. mortar mixer;

Miscellaneous Consignments & Smalls Sell Fri. & Sat. Feb. 14^th & 15^th 

Misc. Consignments; 14 = Maytag wringer washers; 6 = Maytag wringer washers rebuilt and painted; 3 Maytag washers w/square tub & wringer; 2 Maytag washers w/round tubs & wringers; Speed Queen washer w/round tub & wringer;  1000 gallon air tank; Stihl leaf blower; 3 – 100 gallon Gas Boy fuel tanks, DOT approved portable, model 60 12 volt pump, used for diesel; Stone carvings; Condola shelving; 6+ large empty glue totes on skids; Old safe, Jos.L. Hall & Co. Patent 1849, Cincinnati Oh, combination works; Vulcan VF-30 air powered mixer; Murray Way Corp, 4” x 50” Belt Stainless Steel Optical Table; Branding Press/Gun Drill w/clock face press 1800 pcs; Lazy susan bearing w/detent, 226 pcs.; Seat cushion fill. 2 x 18 x 21;  MDF Core Maple Veneer ¾” x 41” x 48” 100 plus pcs;  Evaporator/heater ceiling unit; Hydraulic Hoses, 100 pcs. 10’ long; Cutting Board; Oiling Table;  Binks heater; Diaphragm pump; Skids of oak buttons, plagues and furniture parts;

1000’s of misc. small items: Including air compressors, generators, welders, pressure washers, sand blasters, pallet jacks, electric motors, dust collecting systems, chop saws, electric & air tools, wrenches & socket sets, pipe threaders, lights, chainsaws, ladders, scaffolding, carpenter, mason, and concrete tools, shelving, work benches, fasteners, cords, air hoses, wheels, line-shafts and much more.

 Special Notices Sells Friday, Feb. 14^th

Never been used, Power Flame AMV1250 air make-up furnace system (12 volt) 1,125,000 BTU, ideal for a finish shop with no electric, heats and maintains a positive pressure, NG or propane, line-shaft or direct to power unit. Complete poultry processing equipment liquidation, stainless steel scalder, kill rack, Ashley plucker, 12’ eviscerating line, tipper tie, gizzard peeler, meat saw, heat shrink tank, 2 hock cutters, scales, stainless steel tables, lots of misc. hand tools;

Razorback concrete vibrating power screed w/8 hp Honda motor, from 20’ to 50’ wide;

New AG Trucut 6” band headrig;

 *Selling all 3 Days*. (Dealers and Wholesalers look-in.)

5 Semi Loads of New Tools; Including brands like Irwin, Milwaukee, DeWalt, Makita, Snap On, Vise Grip, Diablo, Morse, Norton and others. Includes (all new) vise grips, chalk lines, chalk, C-clamps, vises, levels, socket sets, wrench sets, bar clamps, sand paper, sanding belts, coolers, hole saws, cordless drills, floor jacks, hand saws, hole saws, pliers, helmets, router bits, welding wire, reflective safety coats, drill bits, saw blades, cement blades, caution flags, bandsaw blades and much more. This consignment comes from a Distribution Warehouse Liquidation. We will sell this stuff individually and in bulk lots

3 – Sessions of Brand New DeWalt, Milwaukee & Makita Tools: We will have another very nice line-up of DeWalt cordless power tools to sell including some of the latest and greatest models and tools that DeWalt has to offer with all warranties intact. We will also have lots of new Milwaukee and Makita tools to sell in these sessions as well. $100,000.00+ of new tools

250+ New Sioux Air Tools: Another nice consignment of Sioux Tools including new tools, demos & salesmen’s samples, of grinders, sanders, drills, riveters, chisels, impact wrenches, impact drivers, screwdrivers and more.

Auction Terms and Information

Auction Terms: Cash, Check or Credit Card w/valid ID. There will be a 5% buyer's premium on-site with an additional 3% for all credit card purchases. Different terms for Online bidding will apply. All items are sold “as is, where is with no warranty expressed or implied." Sales tax does apply unless exempt.

Auction Information: For complete and updated auction details, catalogs & photo’s as well as online bidding links please visit www.airworksauction.com or visit auctionzip.com auction ID 40056.   (No internet = No problem) Request full auction listings and catalogs from the Air Works Auction Office at P.O. Box 242 Kidron, OH. 44636 or Office Phone 330.749.4362.

Auctioneer Note: We are excited to invite everyone out to help us celebrate our 31^st year in the auction business. We are anticipating our largest sale to date.

Unloading Schedule

Monday Feb. 10 from 8:00 A.M. to 8:00 P.M.,

Tuesday & Wednesday. Feb. 11 & Feb. 12 from 8:00 A.M. to 4:00 P.M.

Thursday Morning 7:30 to 12:00 Noon (Reserved for out of state consignors)                                                           

Air Works Auction                                        Ph. 330-749-4362

PO Box 242                                                  Fax 330-816-0006

Kidron OH 44636                                 office@airworksauction.com 

www.airworksauction.com