31^st Annual Air Works Auction 

3 Day Auction 

GPS Location: Mt Hope Auction Grounds; 8076 SR 241 Millersburg OH 44654

Thursday, February 13^th at 9:00 AM 4+ Auction Crews

Friday, February 14^th at 8:30 AM Selling in 12+ Auction Crews

Saturday, February 15^th at 8:30 AM Selling in 12+ Auction Crews

Heavy Equipment * Rolling Stock * Sawmill & Pallet Equipment * Logging Equipment * Power Units * Woodworking * Metalworking * Antiques & Collectibles * Misc. Tools & Equipment

Heavy Equipment/Rolling Stock Sells Online/Live Saturday Feb.15^th

• Dozers & Excavators; 1994 Cat D5H dozer w/6 way blade, 6740 hrs, blade complete retightening package, good condition; John Deere 750B dozer, new motor & radiator; Case 850C crawler loader w/log forks, works good; Case 855D crawler loader w/log forks, works good; Case 455C crawler loader w/log forks, works good; John Deere 450G dozer w/6 way blade, works good; Case 850D dozer w/6 way blade, winch and log arch, works good; 1991 Case 550 long track dozer, 412 hrs, excellent con.; Case 850E long track dozer w/Cargo 30 winch, ROPS/sweeps, 7600 hrs, 75% U.C.; Komatsu D21A dozer, 6 way blade, 3600 hrs, U.C. 90%, rubber tracks, excellent condition; New undercarriage for Cat D4H dozer, also fits Cat D5C to G and 939 track loader, rails & pads, #DCF1-0642; 1980’s John Deere 750D, 2,500 hrs, one owner machine, stored inside, 100% good working unit; John Deere 450B dozer w/winch;

• Wheel Loaders; Volvo L50B w/quick attach, forks & bucket, 6250 hrs, runs good; Cat 924F wheel loader, 20,700 hrs, 1000 hrs on rebuilt engine; Komatsu WA180 wheel loader, 14,700 hrs; 2013 Kawasaki 65 TMV-2 wheel loader, 3000 hrs, works good; John Deere 444E wheel loader, 11,804 hrs, runs; John Deere 444E wheel loader, 5700 hrs, runs;

• Backhoes; Massey Ferguson 50HX 2 wheel drive backhoe, diesel engine, 4000 hrs, cab, joy stick controls, good condition;

• Skid Steers; 2013 Bobcat T770 w/2 buckets & forks, 2750 hrs, 88 hp Kubota engine, cab w/ac/heat; 2004 ASV-RC-85 skid loader w/rubber tracks, 2400 hrs, 85 hp, great machine; Bobcat T300 skidsteer, 4201 hrs, good condition; New Holland LX885, skidsteer, 3385 hrs; Case 1845C skidsteer w/quick tach, Cummins diesel, 3400 hrs; John Deere S250 skidsteer, 4000 hrs, foam tires, 60” bucket, good condition;

• Forklifts; 2013 Toyota 8FGCU25 forklift, propane, 5000 lb., 9800 hrs, new sideshift, 60 day warranty on engine & power train; Datson 5000, LP gas, works good; Clark CY20B forklift, 4 cyl. gas, 2000 lb lift; Hyster forklift, diesel engine, 6000 lb. lift, cab/heat, pneumatic tires, good condition; Yale 40VX 4000 lb. forklift, 2775 hrs, propane; Komatsu FG20C-12 4000 lb. forklift, 10,155 hrs, propane; Clark C500 forklift, 8000 lb. cap. rebuilt trans. & motor, propane, new paint, 8000 hrs; 2003 Linde H30 forklift, 6000 lb., 48” forks;

• Telehandlers; JLG G9-43A telehandler, 43’ reach, 1814 hrs, excellent condition; 2006 JLG G6-42A telehandler w/John Deere diesel, 4271 hrs, 42’ reach, 6000 lb. lift, foam filled tires;

• Manlifts; 2013 Haulotte Biljax 4527A manlift, 45’ reach; Upright SL30SL Speed Level 4WD scissor lift w/6 x 14 platform, Kubota gas engine; Genie GS2032 scissorlift; Genie Z-34/22, series 4WD 10,700 lb. manlift, new tires, gas, elec or propane, works good;

• Log Loaders; 2 = Prentice 210D, works good;

•Skidders; John Deere 540G skidder, 16,000 hrs, excellent tires, new pins/bushings, runs good; John Deere 540B skidder, works good; John Deere 540A skidder, decent condition; John Deere 540G3 skidder, 9801 hrs;

• Tree Sheer;  Hydro Axe 621B sn2230, 5100 hrs, cab heat/air, Detroit diesel w/20’ feller buncher snS62P1629, good condition;

• Trucks; 2010 Chevy Duramax express G3500, enclosed 1 ton utility/service  truck, 220,876 miles, good condition;  1995 Ford L9000 dozer truck, 13’ bed w4.5’ dovetail, Cat diesel engine, 118k miles, 10 speed, air ride, new tires on aluminum rims, good condition; 1998 International 9200 series semi-tractor w/wetline, Cat diesel engine, 540k miles, air ride, newer tires on tandem axles, good condition; 1995 Ford F800 rollback truck, 5.9 Cummins diesel engine, 9 speed, 246k miles, 21.5’ bed, good condition;  1987 GMC utility truck w/crane, truck runs & drives, crane needs works; 2004 Ford F150 4x4 pickup truck, 5.4 engine, 179k miles; 1990 GMC Topkick 24’ flatbed truck, 65k miles, runs good; EZ Dumper, custom built truck insert dump, 12 volt over hyd, barely used; Track dump, low hrs on Yanmar engine;

• Trailers; 2016 CornPro gooseneck trailer, 14,000 gvw; Eager Beaver AP10, 18’ flatbed equipment trailer, 12,800 GVW, tandem axle, good brakes, lights, ramps, good condition; 2010 and 2011 American 14’ dump trailers; 1988 Freuhauf low boy trailer w/hyd. detach, 35 ton, 3^rd axle flip up, new floor, good condition;  ASVE 46’ low boy trailer, new tires, older trailer but titled as 2018, good condition; Bison 34’ tri-axle gooseneck trailer, 27k GVW; 2002 United contractor’s trailer, tandem axle, w/concession doors and and built in shelving; 2007 Moritz gooseneck trailer, 14,000 gvw; 2 = 2012 PJ tandem axle trailers w/slide in ramps, 9900 GVW; 2011 Top Brand single axle utility trailer, 2990 GVW;  2004 United 16’ enclosed tandem axle trailer w/side door;

• Tractors; Ford 7308 4WD tractor w/yard rake; Ford 7308 4WD tractor w/Bradco backhoe; Kubota L245 tractor w/bucket; 1945 Oliver 70 tractor, updated fuel system, runs good;

• Stump Grinders/Mulchers; 3 = Rayco 1635S JRS stump grinders, 2 w/Vanguard engines, 1 w/Duetz engine;  

• Compactors;  Bomag BW172PD-2, 66” vibrating compactor w/Duetz engine;

• Attachments; Hyd. post & tree puller; 42” and 48” pallet forks; and 72” grapples; 72” hyd. broom w/bucket; 72” hyd. brush hog; 66” tooth bucket; New attachments incl. Stout 66”; 5 - buckets; 4, 5 & 6 foot forks; 72” brush hog; 2 - trash hoppers; self-dumping hopper; grapple buckets; New salt/seed/fertilizer spreader; New 72” rototiller etc.

• Miscellaneous Equipment; John Deere 4000 series winch; Forks off of Cat IT28 wheel loader; Cat 4’ track hoe boom extender, fits Komatsu PC200; Grout Hog, ¾ yard, hyd. driven auger w/accessories; Manlift basket, 1250 lb certified cage; 2 = 100 gallon DOT portable diesel fuel tanks, 1 has a Gas Boy fuel pump; 18” toothed bucket, fits Komatsu PC78; 54” smooth bucket, fits Komatsu PC78; Loegering skidloader tracks; Diesel light tower/generator; Finn B40 straw blower; Bolens GT2000 Tractor, 20 hp w/snow plow, blower and blade;

Sawmill/Logging & Pallet Equipment Sells Online/Live Mostly Friday Feb. 14^th

• Sawmills: Like New HMC, MM10 automatic sawmill w/3HB, AC44 w/run around, set works and controls; New AG Trucut 6” band headrig; Brewco fastline super scragg, redone, excellent con.; 2010 Woodmizer LT70 portable bandmill, one owner, fully hyd. w/all the extras, 65 hp Cat engine, 1300 hrs, stored inside; Woodmizer LT70 bandmill, good condition; HD 36” Lumber Tiger Bandmill, model 40hp71596, 40 hp John Deere, 22’ track, 24” opening, power drive and power up & down; Woodmizer LT30 portable bandmill, low hrs, 3HB, lineshaft or electric motor; 2019 Norwood HD36 sawmill, cuts 20 ft. logs, excellent condition;  Portable bandmill, shop built, 18’ track w/10 extension, 26” cap., 13 hp Honda w/electric start on head,  5.5 Honda on hydraulics, complete w/log turner, dogs and stops, good condition;

• Carriages; Cleereman 36” carriage, track, frame & drive, excellent con.; Pierce carriage w/3HB, track, frame, drive, husk and log turner; Frick carriage, hand set, air operated, track & frame, good con.; Frick 01 track and carriage;

• Chippers/Hogs; Morbark Chip-Pac, 48” w/electric motor, 3 knife, in g.c.; Precision Husky 58” chipper w/shaker; Montgomery hog, 45 PMKC, top feed, rebuilt & in excellent con.; Williams 32” hammer hog w/3” screen rebuilt & in excellent con.; West Salem 32” Hammer hog, rebuilt; 2008 Vermeer BC600VL chipper, 27 hp Kohler engine, 110 hrs, excellent condition; Weima wood grinder, WLH Tiger 600, 60 hp, 1400 hrs, 460v 3 ph w/control panel;

• Shaving Mill; Tremzac shaving mill, TZ248, portable, demo unit, low hrs, handles 24” x 8’ logs, hyd. drive, g.c.;

• Edgers; Baker portable edger w/Honda engine, 441 hrs, like new; Corley edger, 4” x 32” w/2 movable blades and infeed table; Meadows 4” x 8” 2 blade edger, 1 blade movable; Edminton 3 blade edger; Frick 27” edger, 2 blades, 1 movable, works good; Weaver 2 blade 27” edger, 1 blade movable, variable speed w/8” drop deck; Woodmizer edger; Crosby 2 blade edger w/1 movable blade, good condition; Woodmizer EG25 edger, 2 blades;

• Resaws; Like New 2019 Woodmizer HR120 resaw, 67 hrs, 25 hp Kohler gas engine; West Plains resaw WPRS-WBS, 14” capacity, lineshaft;  Woodmizer single head resaw w/Honda engine,  like new; Baker single head resaw, BPQ-0, electric drive, excellent con.; Fast Line grade resaw, 16” cap. w/electric motor; Brewer 2000 resaw, Golden Eagle w/run around, 12 x 12, excellent condition; Woodmizer resaw attachment, lineshaft on frame w/S Vickers hyd. pumps25-75 hp and 1 KPM pressure compressor pump; Morgan double head resaw w/run around, electric;

• Trim & Chop Saws; New County Line Equipment 7 x 9 chopsaw, lineshaft ready; Hemco multi trim saw, 9 heads, 8” x 20’ cap. electric drive, g.c.; Brewco fastline, double head trim saw, electric motor; Upcut chop saw, 4” x 6” cap.; Trim saw, 2 blades, up to 16’ w/trash belt conveyor, electric drive, works; CTR buck saw; Baker chop saw w/infeed;  Chop saw, electric motor w/infeed & outfeed; Yates American cut off saw, 3 ph electric motor that mounts on ceiling, outfeed rollers with stops;

• Pallet Equipment; Pallet runner feeder w/like new hyd. unit; 2 = sticker carts, 18” x 40” w/10” sides, hyd. drive, g.c.; Mellinger sticker machine, 2 lift tables, hyd, electric motor w/gearbox drive, from 6’ to 16’ lumber, g.c.; 8’ round stacking table; Pallet stacker; Stutzman double head notcher, 40”  to 144” runners;

• Unscramblers; Cornell 4 chain unscrambler, electric motor w/gearbox drive, g.c.; 3’ to 16’ board unscrambler, 8’ tall, electric drive, g.c.; Round stacking table, 8’ w/electric drive;

• Debarkers; 2011 Mellot 36” debarker, completely rebuilt, excellent con.;

• Log Turners; Frick log turner; Mellot log turner, rough con.;

• Slabwood Saws; New AG Trucut automatic slabwood saw, lineshaft ready; Slabwood cut off saw w/24” blade; 

• Conveyors; 2 = bark conveyors, 30’ and 36’ long, ladder back chain, electric drive, g.c.; Belt conveyor, 34” x 33’ w/6” sides, hyd. drive, rough con.; Belt conveyor, approx.. 18” x 20’ electric drive; Barn sweep only drive is good; belt conveyor, 14” x 20’ no drive, needs work; Bushman Accuglide live rolls 28” x 57’; Bushman Accuglide conveyor 28” x 24’; 2 = belt conveyors, 16” x 24’, hyd driven; Laderal wood transfers, 1^st and 2^nd levels; Mellot vibrating conveyor, 50 ft. long, excellent condition;

• Decks: Green chain, 12’ x 28’, 4 strand, g.c.; Green chain, 5’ x 13’, 2 strand w/hyd drive; Green chain log deck, 28’-3 strand, automated, electric drive; Rollcase, 20” x 17’ hyd drive, g.c.; Mellot 14’ rollcase; Mellot 20’ rollcase; Mellot 3 strand chain transfer deck;

• Hoppers; 5 = New Creek Side hoppers

• Deduster; 2 = Go Fast dedusters, wire brushes, g.c.; Brewco deduster, extra brush, good condition;

• Blowers; Morbark chip blower, electric drive, good condition;  Morbark chip blower, g.c.; 72” dust blower no power, g.c.;  2 = 24” sawdust blowers, rebuilt; 36” dust blower w/16” air lock built on w/3ph 30 hp electric motor, g.c.; 36 “ blower w/12” inlet & 10” outlet; CFW 40 hp chip blower, 460v, excellent condition; Balcor 7.5 hp sawdust blower, 230/440v;

• Firewood Processor:  2017 DYNA SC15 firewood processor w/34 hp Cat diesel, 14’ conveyor, 4” x 6” wedge, 720 hrs, factory refurbished w/ 90 day warranty;

• Misc. Dyna stake pointer; 20 sections pallet racking; Mud cleaner & frame; 2 = 52” sawblades, g.c.; Hyd motor on tank w/pump & 30 hp electric motor; 100 hp electric motor; 30 hp electric motor; Cooksaw dual tooth setter on stand, works good; Hazeldine chamfer, electric motor, g.c.; Newman stringer band router w/new electric motor; Concrete truck frame, ready to set log loader on top to create a 6 wheel transmission forwarder; hyd. unit, 15 hp w/pumps; LP Vaporizer; Hanchett chipper blade sharpener, w/3ph, 3 hp electric motor;

Power Units & Compressors Sells Saturday Feb. 15^th

• Power Units; Detroit, 50 series, 300 hp, power unit w/clutch, good condition; John Deere power unit w/new clutch, 75 hp, 553 hrs, excellent condition; John Deere, 6068T, 160 hp power unit w/clutch, in frame overhaul; 3 = Duetz F3L912 power units from 4,000 to 6,000 hrs; Duetz F3L912 rebuilt power unit w/clutch; Cummins 6BT 175 hp, 6 cyl. power unit; John Deere 12.5 liter power unit, 9000 hrs, runs good; John Deere 4045T power unit W/clutch, rebuilt; John Deere 6068HF power unit, 30,100 hrs; 671 Detroit diesel, fair condition; clutch w/#2 housing; 1999 Isuzu power unit, model A4DG12, 4 cyl w/turbo, 90 hp, 21,588 hrs, w/clutch; Isuzu A-6BGIT, 6 cyl. power unit, good condition; John Deere 6329 power unit, 98 hp w/new switch panel and Murphy shutdown; 8 hp power unit, 900 hrs w/switch panel; John Deere 4024T power unit w/new clutch, 45 hp;

• Hydraulic units; Georgetown GEO-08-24-L 8 hp hydraulic pack on stand, works good;

 • Compressors; 30 Challenge Air E-57A 5 hp air compressor, 100 gallon tank, 3 ph elec.; Bauer 30 hp. Air compressor; 217 PSIG screw compressor mounted on tank, driven by 30 hp. Electric motor, including a Zandes KN4 air dryer, everything in A 1 condition; 2007 Quincy 10 hp air compressor; Leroi 125 psi air compressor driven by 350 hp electric motor; 1992 Bauer screw compressor, R23UF, 128 CFM; Quincy 390, 20 hp air compressor; 3 large industrial air compressors mounted on tanks driven by 220v electric motors; 10 hp air compressor on 120 gallon tank, electric motor; IR 25 hp compressor, needs repaired; Honda 11 hp motor, electric start, mounted on slide w/Quicy compressor;

• Gensets; 1986 Cummins genset 150kw, governor issue; Cummins genset 300kw, 425 hp, needs rebuilt; Genset 320kw, 3406B Cat diesel, 7700 hrs, runs good; 2 = Olympian, 100kw 3 ph generators, good condition; Kubota V3300 4 cyl. diesel, Magnaplus 40kw genset, 3 phase 120/240v, 27,889 hrs, runs good; Onan 30kw genset, 30-ODDA-15R run by John Deere diesel, 1283 hrs. good condition; Detriot 450DSEB genset, 450kw, 3 phase, 10,000 hrs, good condition; 1999  Generac 150kw genset, 2000 series Hinc engine, 4000hrs; Lister Petter 18kw genset, recent rebuilt;

• Generators; Kohler 10,000 watt generator, 120v/240v, like new; Kohler 3 in 1, 9500 watt generator, welder, air compressor, 12v/240v, like new; Duetz diesel 45 kw genset, 80 hp, 7000 hrs, works good; Marelli MJBS34 110kw generator, 419 hrs, like new;

Misc; 30 hp. 3 phase converter;

Woodworking Equipment Sells Live/Online Fri. & Sat. Feb. 14^{th &} 15^th (Multiple Rings)

• Table Saws:  New Delta RT40 14” table saw, 230v-3 ph; New Oliver 4016 10” table saw w/52” fence, 230v 3 ph; New Oliver 10040 10” table saw, w/52” fence, 115v; New Classical 10” table saw, no motor; 2007 Altendorf WA8 sliding table saw, elec/hyd; Sawstop 10” industrial table saw; Hammer K3 sliding table saw, 220v; Powermaitc 66 table saw, 52” fence, 220v; Jet JCS-10 10” table saw, 220v; Powermatic 66 table saw, 36” fence, 220v; Powermatic 63 table saw, 36” fence, 220v; 2014 General 10” table saw, 3 hp, 220v, great condition; Daytona 12” table saw; sliding table saw; Rockwell 14” table saw; Excaliber model 50 sliding table saw;

• Cutoff Saws:  New Delta 33-422 radial arm saw, 230v-3 ph; Whirlwind 216, upcut saw w/infeed & outfeed tables; Dewalt radial arm saw; SCMI RS-2515, radial arm saw, 220v; 4 = Dewalt miter saws; Dyna CS60 chop saw, 22” blade; 2005 Omga 300 chop saw; CTD DM200 double miter saw; Delta Radial Arm Saw, 5 hp, 14” Blade;

• Bandsaws: Powermatic 2415-3 36” bandsaw; Delta bandsaw; FH Clement 48” bandsaw;

• Panel Saws;  Felder panel saw; Robland panel saw; SSC 5860-T2 panel saw/router; Streibig panel saw; Milwaukee panel saw;

• Straight Line Rip Saws; Mattison 202 straight line rip saw, electric; Diehl SL50 straight line rip saw; Adolf John & Co. 2136 straight line rip saw, top arbor;

• Planers: New Stonewood ST-20, 20” planer, w/shear spiral head cutter, no motor; New Oliver4420, 16” planer w/shear spiral cutter, 230v; 2004 Northtech 610SS 2 sided planer, 24” wide, 60 hp top & 50 hp bottom w/7.5 hp var. speed feed motor, 2.5mm x 12mm x 30mm double sided insert knives; CA planetary sander w/24F feeder, excellent condition; Northfield model 7 24” spiral head planer, 3 hp. 3ph. 220/550v, air feed, good condition; Powermatic 209-1 20” planer, straight knife, fair condition; Steel City 20” industrial planer, hyd; Delta 15” straight knife planer, 1 ph. 220v, good condition; Lobo 20” straight knife planer, hyd. powered, fair condition; Newman planer; Grizzly 20” planer w/Byrd spiral cutter head, lineshaft; Grizzly G5851Z 24” variable speed planer w/hyd. motor, good condition; SCM S-520 20” planer, straight knife, 220v; Delta 12” planer; Jet JWP-15CS 15” planer, straight knife, lineshaft ready; Yates 2 sided planer; Grizzly planer w/straight knives; Like New Delta 104834 13” planer;

• Lathe: Delta 16” lathe, hyd. powered, good condition;

• Jointers; New Powermatic PJ882HH 8” parallelogram jointer, hyd driven;  2 = New Delta DJ-20 jointers, 230v-3 ph; New Oliver 4235, 8” spiral head jointer (parallelogram) 230v; New Oliver 4225, 6” spiral head jointer (parallelogram) 115v; Grizzly G1182HW 6” jointer w/hyd. motor, good condition; Powermatic 60, 8” jointer, 220v; 1996 Geetech CT-200 8” jointer;

• Shapers: New Oliver 4705, 1 ¼” spindle shaper w/micro fence, 230v; New Oliver 10047, 1 ¼” spindle shaper w/micro fence, 220v; Unique 250MC complete door shaper, hyd. driven; Powermatic 2700 shaper, hyd; Polanco ZPML 1 ¼” spindle shaper, 7 hp, 220v/3 ph; Grizzly G1026 shaper w/hyd. motor, good condition; Mini Max T3, 1” spindle shaper w/1 ¼” spacers, 220v; Delta ¾” spindle shaper; Greenlee 180, double spindle shaper;

• Power Feeds; 5 = New Delta 36-836, 3 roll power feeds, 220v; New Stonewood AF-48, 4 roll power feed, 220v 3 ph; New Stonewood AF-38, 3 roll pwer feed, 220v. 3 ph; Steff 2034, 3 roll power feed; 3 roll power feeder; Powermatic 3 roll power feeder, 110v; Powermatic PF43 power feed, air motor driven;

•  Pin & CNC Routers; 2 = CR Onsrud inverted routers; Multi router set up w/Honda motor;

• Molders: SKM 5 head moulder, 3 ph electric; 3 phase inverter; Logosol PH260 4 head planer/moulder w/hyd. motors, good condition; Leadwermac, 5 head moulder, hyd. driven; Molding machine; 1988 Weinig U22AL 5 head moulder, 1-13/16” spindles, 3 ph/460v; Deihl 405 Accumould 5 head moulder, 9” wide, 1 13/16” spindles, refitted w/VFD for feed speed control, grooved bed and cutters for running short stock, 480v;

• Stroke Sander: • Edge & Drum Sanders:  New Oliver 6305, 6” x 89” edge sander, 115v; Progress PMC-152, 6” x 158” edge sander, 5 hp. 3 ph. 480v, 58” table, good condition; Powermatic 6” x 89” edge sander, 110v; G & P pump sander, 4” x 6” drums, 3 ph, 240v, excellent condition; Drum sander w/flap wheel; CAM Ocsillating drum sander; Delta 6” x 8” drum sander, 3 ph. 480v, fair condition; Dyna KO600 double drum sander; Custom made 6” x 129” edge sander, 220v; Custom made flap sanding machine, 3 ph. 230v; Woodmaster drum sander, lineshaft; Peerless drawer box sander w/36” platinum, hyd powered; like new Grizzly G0564 edge sander, 6” x 108”, hyd; Bosh Model 751DB, 7.5 hp, 3450 rpm oscillating, edge sander, 3 hp w/36” Platen;

• Wide Belt Sanders: SCMI CL2R92, 37” x 75”, 2 head, wide belt sander, 230v/3 ph; Powermatic FE-37, 37” x 60”, wide belt sander; SCMI 36” x 60” wide belt sander, 3 ph. 230v; Grizzly G9983 wide belt sander w/hyd. motor, good condition; Sanding Master scsb1300 wide belt sander, 52” wide, 2 heads, electric; Ramco 36” wide belt sander, electric; Burlington 2 head wide belt sander, 3 phase, older machine;

• Boring Machines:  New Pocket Master PM150, pocket hole machine, air operated; Kreg pocket hole machine; Ritter single spindle dowel machine; Ritter R46 line boring machine, 220v; ARO automatic double end drilling machine, good condition; Horizontal drilling machine; Delta Line Boring Machine, electric; Delta line boring machine w/air motor; Scheer 3 spindle boring machine;

• Mortise & Tenoners: Bell model 710 slot mortiser w/foot pedal, 3 ph, 240v, good condition; Dyna MT60X log tenoner; Balistrini mortiser, good condition; Allwin AWEN-300 end matcher, 40mm spindles, 7,000 rpm, 11” plus width cap., power roller infeed conveyor, 460v 3 ph; Wysong 284 automatic mortiser, works good;

• Edge Banders: SCM Selecta 12F edge bander; Cehisa edge bander, 230v; 1985 Holz IDM Acimall 2217S edge bander;

•  Drill Presses: New Stonewood JDT65 manuel dovetailer, 115v; Rockwell Delta drill press, lineshat;  Powermatic 1150A drill press; Powermatic 1150 drill press;  Dyna DR60 drill press;

• Dovetailers:  Dodds M1463 12 spindle  dovetailer w/manual clamps;   2 = Dodds SE15, 15 spindle dovetailers, hyd & air powered; Dodds SE-15 dovetailer;

• Door & Drawer Clamps : JLT door clamp; Unique door clamping table; Custom made, post clamping machine; •Glue Spreaders; 60” plate glue applicator; Taylor 171-M3 glue applicator; Glue applicator; Glue plate spreader w/ new plate;

• Downdraft Tables; New Dust Pro 36” x 72” down draft table, 115v; 2 = custom made downdraft tables; Denray 7200, downdraft table, 220v; Denray 9600, downdraft table, 220v;

• Dust Collectors: New Delta 50-861 5 hp dust collector, 230v-3 ph; New Delta 50-900 cyclone dust collector, 230v-3 ph; New Nederman S-1000, 5000 cfm dust collector, 230/460v; New Stonewood 1 bag dust collector, 115v; New Stonewood 2 bag dust collector, 220v; Clear Vue cyclone, dust collector, 5 hp, 220v/3 ph; Donaldson Torit dust bin w/blower, hyd, good condition; Grizzly G1030 sawdust collector w/hyd. Motor, good condition; Jet double bag dust collector, 110v; 3 = Jet 1 bag dust collectors, 110v; Typhoon DC-3075, 3 bag dust collector, lineshaft ready;  2014 General single bag dust collector, 110/220v; Arrespall dust collecting system, 14” uinlet, hyd powered w/shaker; Honeyville cyclone, 32” x 55” high w/ 5 HP Dayton blower 2C652, 115 volt 80 PSI Dust Collector;

• Finish Equipment; 2 = Graco diaphragm pumps;  Kremlin 15:1 spray pump;

• Misc. Woodworking Equipment: Lift Rite L-68, air operated straddle lift, single stage, 2000 lb.;  Air scissor lift 24” x 48”; Safety Speed TR2 table router frame, good condition; 24” x 60 “ roller conveyor; Tyler, power pod, 25” x 77” work area, air powered, fair condition; Chucker on stand, 2 hp, 3 ph w/1/2”, ¾” and 1” heads; 2 = 50 shelf rolling drying racks; Sandman inspection lights;  PH-1 prime heat curing system;

Metalworking Equipment Sells Mostly Friday Feb. 14^th

Miller Wildcat 225G stick welder, w/S-32P 12 mig welder on top, in running condition; New metal workbenches; Craftsman metal lathe; Lobo copy lathe; Miller Welder, Trailblazer 250G, good condition; 5 ton air operated bridge crane hoist; 100 ton H-frame press, hyd. driven; Pratt & Whitney 2A jig bore, hyd. powered; Like new ½” metal bandsaw;

Building Materials & Sheds Sells Fri. & Sat. Feb. 14^th & 15^th

2 truck loads of misc. lumber and trim; 1 truck load of new windows and doors; 18 new 100 series Anderson windows;  

Contractor Tools & Equipment Sells Fri. & Sat. Feb. 14^th & 15^th

New Magnum 4000 psi steam cleaner; Safway 5’ scaffold bucks and braces, approx.. 50 pcs; Stanley hyd power unit, driven by 18 hp V-twin Vanguard engine, electric start, 289 hrs; Hyd. concrete saw; Electric water pump; 50’ of hyd hose; 10 = 55 gallon drums of Ellis Shore brackets that fit 4 x 4’s; 1 yard concrete bucket; 1/3 yard concrete bucket; 2013 Toro 6 cu. ft. mortar mixer;

Miscellaneous Consignments & Smalls Sell Fri. & Sat. Feb. 14^th & 15^th 

Misc. Consignments; 14 = Maytag wringer washers; 6 = Maytag wringer washers rebuilt and painted; 3 Maytag washers w/square tub & wringer; 2 Maytag washers w/round tubs & wringers; Speed Queen washer w/round tub & wringer;  1000 gallon air tank; Stihl leaf blower; 3 – 100 gallon Gas Boy fuel tanks, DOT approved portable, model 60 12 volt pump, used for diesel; Stone carvings; Condola shelving; 6+ large empty glue totes on skids; Old safe, Jos.L. Hall & Co. Patent 1849, Cincinnati Oh, combination works; Vulcan VF-30 air powered mixer; Murray Way Corp, 4” x 50” Belt Stainless Steel Optical Table; Branding Press/Gun Drill w/clock face press 1800 pcs; Lazy susan bearing w/detent, 226 pcs.; Seat cushion fill. 2 x 18 x 21;  MDF Core Maple Veneer ¾” x 41” x 48” 100 plus pcs;  Evaporator/heater ceiling unit; Hydraulic Hoses, 100 pcs. 10’ long; Cutting Board; Oiling Table;  Binks heater; Diaphragm pump; Skids of oak buttons, plagues and furniture parts;

1000’s of misc. small items: Including air compressors, generators, welders, pressure washers, sand blasters, pallet jacks, electric motors, dust collecting systems, chop saws, electric & air tools, wrenches & socket sets, pipe threaders, lights, chainsaws, ladders, scaffolding, carpenter, mason, and concrete tools, shelving, work benches, fasteners, cords, air hoses, wheels, line-shafts and much more.

 Special Notices Sells Friday, Feb. 14^th

Never been used, Power Flame AMV1250 air make-up furnace system (12 volt) 1,125,000 BTU, ideal for a finish shop with no electric, heats and maintains a positive pressure, NG or propane, line-shaft or direct to power unit. Complete poultry processing equipment liquidation, stainless steel scalder, kill rack, Ashley plucker, 12’ eviscerating line, tipper tie, gizzard peeler, meat saw, heat shrink tank, 2 hock cutters, scales, stainless steel tables, lots of misc. hand tools;

Razorback concrete vibrating power screed w/8 hp Honda motor, from 20’ to 50’ wide;

New AG Trucut 6” band headrig;

 *Selling all 3 Days*. (Dealers and Wholesalers look-in.)

5 Semi Loads of New Tools; Including brands like Irwin, Milwaukee, DeWalt, Makita, Snap On, Vise Grip, Diablo, Morse, Norton and others. Includes (all new) vise grips, chalk lines, chalk, C-clamps, vises, levels, socket sets, wrench sets, bar clamps, sand paper, sanding belts, coolers, hole saws, cordless drills, floor jacks, hand saws, hole saws, pliers, helmets, router bits, welding wire, reflective safety coats, drill bits, saw blades, cement blades, caution flags, bandsaw blades and much more. This consignment comes from a Distribution Warehouse Liquidation. We will sell this stuff individually and in bulk lots

3 – Sessions of Brand New DeWalt, Milwaukee & Makita Tools: We will have another very nice line-up of DeWalt cordless power tools to sell including some of the latest and greatest models and tools that DeWalt has to offer with all warranties intact. We will also have lots of new Milwaukee and Makita tools to sell in these sessions as well. $100,000.00+ of new tools

250+ New Sioux Air Tools: Another nice consignment of Sioux Tools including new tools, demos & salesmen’s samples, of grinders, sanders, drills, riveters, chisels, impact wrenches, impact drivers, screwdrivers and more.

Auction Terms and Information

Auction Terms: Cash, Check or Credit Card w/valid ID. There will be a 5% buyer's premium on-site with an additional 3% for all credit card purchases. Different terms for Online bidding will apply. All items are sold “as is, where is with no warranty expressed or implied." Sales tax does apply unless exempt.

Auction Information: For complete and updated auction details, catalogs & photo’s as well as online bidding links please visit www.airworksauction.com or visit auctionzip.com auction ID 40056.   (No internet = No problem) Request full auction listings and catalogs from the Air Works Auction Office at P.O. Box 242 Kidron, OH. 44636 or Office Phone 330.749.4362.

Auctioneer Note: We are excited to invite everyone out to help us celebrate our 31^st year in the auction business. We are anticipating our largest sale to date.

Unloading Schedule

Monday Feb. 10 from 8:00 A.M. to 8:00 P.M.,

Tuesday & Wednesday. Feb. 11 & Feb. 12 from 8:00 A.M. to 4:00 P.M.

Thursday Morning 7:30 to 12:00 Noon (Reserved for out of state consignors)

Air Works Auction                                        Ph. 330-749-4362

PO Box 242                                                  Fax 330-816-0006

Kidron OH 44636                                 office@airworksauction.com 

www.airworksauction.com