East Bank Machine
Previous Page Listing ID#: 176685

Auction Location

Elizabeth, PA 15037
Auction Dates and TimesSALE IS COMPLETED
Wednesday Mar 4, 2020 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Email: info@hartlandmachinery.com
Website: www.hartlandauctions.com

GoToAuction.com ID#: 6269
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day of the sale, unless a wire transfer is required. The wire transfer shall be sent no later than the next business day by 3:00 PM. 2.Purchases shall be paid for with cash, WV, PA or Ohio co. checks, credit card or wire transfer. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer’s Premium of 12% applies to all lots sold in-house, 15% online. 3% surcharge for credit cards 6.$5 minimum bid. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.All machines are either disconnected at the plug or at the quick disconnect box, box not included. 12.Removal dates and times: After the end of the auction until 5:00 pm. Weekdays from 9 am to 4 pm, for dates to be announced by auctioneer. All other dates by appointment only. Call auctioneer to schedule. Items not picked up will be considered abandoned, unless prior arrangements have been made with the auctioneer. Storage fees will apply for items picked up after three weeks. Call or see auctioneer for details. Additional $150 per day fee for checkout on the day you pick up. 13.NSF or stop payment checks are subject to a $35.00 returned check fee
File Attachments
Catalog Flyer
Listing Information

Preview Tuesday, March 3, from 9 am to 3 pm

 

 online bidding available through Bidspotter.com

TERMS: Items sold as is, where is, how is. An 12% buyer’s premium applies to all lots sold in-house, 15% online. Accepted payments include credit card (with 3% surcharge fee), cash, company check (PA, OH, or WV checks), bank letter of credit with out-of-state checks, or wire transfer.

 

IMPORTANT INFORMATION: THE AUCTIONEER MAKES NO WARRANTY OR GUARANTEE, EXPRESSED OR IMPLIED, AS TO THE ACCURACY OF THE INFORMATION HEREIN CONTAINED. IT IS FOR THIS REASON THAT BUYERS SHOULD INSPECT ALL ITEMS PRIOR TO BIDDING. THE BROCHURE IS INTENDED TO PROVIDE GENERAL INFORMATION OF THE EQUIPMENT BEING OFFERED AND IS SUBJECT TO ERRORS, OMISSIONS, ADDITIONS OR DELETIONS. COMPETE AUCTION CATALOGS WILL BE AVAILABLE THE DAY OF THE AUCTION. ITEMS OFFERED MAY OR MAY NOT NECESSARILY BE SOLD AS DESCRIBED AND/OR PHOTOGRAPHED.

 

 

Fabricating & Welding

 

ROCKFORD HYDRAULIC SLOTTER, MO SA, SN 87 SA 64, 28" TABLE, 20" STROKE, PENDANT CONTROL,

 

ROCKFORD HYDRAULIC 24" SHAPER

 

SPEEDAIRE 9 GALLON SANDBLAST POT & ACCESSORIES

 

DAKE H-FRAME PRESS, 44" BETWEEN UPRIGHTS

 

GREENERD NO 4 ARBOR PRESS

 

ULTRA-GRAPH HEATH SHAPE CUTTER WITH ESAB TORCHES

 

NCG CUT-O-MATIC TRACK BURNER

 

TORCH CART & HOSES

 

16"x45"x3/8" METAL TABLE

 

30"x36"x1/4" METAL TABLE

 

41"x31.5" METAL TABLE

 

64.5"x70"x5/8" METAL LAYOUT TABLE WITH CABINETS

 

Saws

 

WELLSAW HORZ BAND SAW

 

GROB VERTICAL BAND SAW, 18" THROAT, 12" UNDER GUIDE, 24"x24" TABLE, WITH BLADE WELDER

 

Welders

 

MILLER DELTAWELD 450 ON ROLLER CART WITH MILLERMATIC S-32S WIRE FEED ON ROLLER CART, SN JC632413, 100% DUTY CYCLE

 

MILLER SPECTRUM 750 DC PLASMA CUTTER, SN KE619357, STOCK 903194, 230/460/575 VOLTS

 

MILLER CP-300 WELDER WITH MILLER WIRE FEED, SN JJ436918, STOCK 902931, 100% DUTY CYCLE

 

MILLER GOLD STAR 600SS ARC WELDER, SN JB529428, 60% DUTY CYCLE

 

 

 

 

 

MACHINE SHOP

 

Lathes

 

AXELSON 18"x69" LATHE, 20.5" SWING, 10' BED LENGTH, 72" CENTERS, 8-808 RPM SPINDLE SPEED, SN 3233, WITH ALORIS STYLE QUICK CHANGE TOOL POST, 18" 4-JAW CHUCK, 10" 3-JAW CHUCK, 5", 6", 10" STEADY RESTS, 10' & 15" FACE PLATES

 

AMERICAN PACEMAKER 20"x72" LATHE, 20-1200 RPM, 23" SWING OVER WAYS, 18" 4-JAW CHUCK, 12" STEADY REST, 19" FACE PLATE,

 

CINCINNATI 20"x200" LATHE, SN 3307, 200" CENTERS, TAPER ATT. , 20" SWING, 16" 4-JAW CHUCK, ALORIS STYLE TOOL POST, 12" & 6" STEADY

 

LODGE & SHIPLEY 32"x240" LATHE, 32.25" SWING OVER WAYS, 247.5" SWING OVER CROSS SLIDE, 240" CENTERS, 9-500 RPM, 24" 4-JAW CHUCK, 31" FACE PLATE,

 

Mills

 

CINCINNATI NO 3 HORZ MILL, SN 4A3P1J-107, 18-1300 RPM, 15"x62.5" OVERALL TABLE SIZE

 

CINCINNATI #2 HORZ MILL, 12"x52" TABLE, 20-1500 RPM SPINDLE SPEED, SN 4A2P1L-73

 

SAIMP TVA-1 VERTICAL MILL, MODEL S, SN 2095, 100-2800 RPM SPINDLE SPEED, 10"x44" TABLE

 

BRIDGEPORT VERT MILL, SN 128908, 9"x42" TABLE, WITH SERVO X-AXIS POWER FEEDS, WITH COLLETS & RACK

 

ALSO

 

MITTS & MERRILL HYDRAULIC KEYSEATER, MODEL 2-HFRD-KS, SN KM-7621, MAX LENGTH 12", MAX WIDTH 1.25", LARGEST STANDARD POST 2-3/8"

 

CINCINNATI BICKFORD RADIAL ARM DRILL, 11" COLUMN, 5' ARM, SN 2E1094, WITH 18"x24"x13" BOX TABLE,

 

OLIVER DRILL GRINDER

 

CINCINNATI #2 TOOL & CUTTER GRINDER

 

 

 

 

Inspection

Starrett micrometers with standards, Mitutoyo 6”-12” mic set, dial indicators, calipers

 

 

ALSO

 

CAT V60B 6,000 LB FORKLIFT, DOUBLE MAST, LP, SOLID TIRE, 127” LIFT

 

BRODERSON 10 TON ROUGH TERRAIN CRANE, MODEL IC80 1B, SN 109298, 4587 HOURS, DIESEL

 

INDUSTRIAL AIR MACHINE AIR COMPRESSOR, 5 HP

 

JACOBS SPINDLE NOSE LATHE CHUCK, WITH RUBBER FLEX COLLET SETS

 

INDEXING HEADS

 

ROTARY TABLES

 

QUICK CHANGE TOOLING

 

TAPER TOOLING, END MILLS, BORING BARS, TAPER SHANK DRILLS, TAPS, DIES

 

VISES

 

ANGLE PLATES

 

NEW METAL STOCK INCLUDING STAINLESS, IN ROUNDS, FLAT, KEYS STOCK, ETC

 

PEDESTAL GRINDERS

 

 
Auction License: AU-002918-L
Photo Gallery










































































































































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Nov 23
Harrisville, PA

Sponsored Links

East Bank Machine

Hartland Auctioneers

Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Sale Location
1 Church St
Elizabeth, PA 15037
Sale Dates and Times
Wednesday Mar 4, 2020 Completed
Sale Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day of the sale, unless a wire transfer is required. The wire transfer shall be sent no later than the next business day by 3:00 PM. 2.Purchases shall be paid for with cash, WV, PA or Ohio co. checks, credit card or wire transfer. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer’s Premium of 12% applies to all lots sold in-house, 15% online. 3% surcharge for credit cards 6.$5 minimum bid. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.All machines are either disconnected at the plug or at the quick disconnect box, box not included. 12.Removal dates and times: After the end of the auction until 5:00 pm. Weekdays from 9 am to 4 pm, for dates to be announced by auctioneer. All other dates by appointment only. Call auctioneer to schedule. Items not picked up will be considered abandoned, unless prior arrangements have been made with the auctioneer. Storage fees will apply for items picked up after three weeks. Call or see auctioneer for details. Additional $150 per day fee for checkout on the day you pick up. 13.NSF or stop payment checks are subject to a $35.00 returned check fee
Listing Details

Preview Tuesday, March 3, from 9 am to 3 pm

 

 online bidding available through Bidspotter.com

TERMS: Items sold as is, where is, how is. An 12% buyer’s premium applies to all lots sold in-house, 15% online. Accepted payments include credit card (with 3% surcharge fee), cash, company check (PA, OH, or WV checks), bank letter of credit with out-of-state checks, or wire transfer.

 

IMPORTANT INFORMATION: THE AUCTIONEER MAKES NO WARRANTY OR GUARANTEE, EXPRESSED OR IMPLIED, AS TO THE ACCURACY OF THE INFORMATION HEREIN CONTAINED. IT IS FOR THIS REASON THAT BUYERS SHOULD INSPECT ALL ITEMS PRIOR TO BIDDING. THE BROCHURE IS INTENDED TO PROVIDE GENERAL INFORMATION OF THE EQUIPMENT BEING OFFERED AND IS SUBJECT TO ERRORS, OMISSIONS, ADDITIONS OR DELETIONS. COMPETE AUCTION CATALOGS WILL BE AVAILABLE THE DAY OF THE AUCTION. ITEMS OFFERED MAY OR MAY NOT NECESSARILY BE SOLD AS DESCRIBED AND/OR PHOTOGRAPHED.

 

 

Fabricating & Welding

 

ROCKFORD HYDRAULIC SLOTTER, MO SA, SN 87 SA 64, 28" TABLE, 20" STROKE, PENDANT CONTROL,

 

ROCKFORD HYDRAULIC 24" SHAPER

 

SPEEDAIRE 9 GALLON SANDBLAST POT & ACCESSORIES

 

DAKE H-FRAME PRESS, 44" BETWEEN UPRIGHTS

 

GREENERD NO 4 ARBOR PRESS

 

ULTRA-GRAPH HEATH SHAPE CUTTER WITH ESAB TORCHES

 

NCG CUT-O-MATIC TRACK BURNER

 

TORCH CART & HOSES

 

16"x45"x3/8" METAL TABLE

 

30"x36"x1/4" METAL TABLE

 

41"x31.5" METAL TABLE

 

64.5"x70"x5/8" METAL LAYOUT TABLE WITH CABINETS

 

Saws

 

WELLSAW HORZ BAND SAW

 

GROB VERTICAL BAND SAW, 18" THROAT, 12" UNDER GUIDE, 24"x24" TABLE, WITH BLADE WELDER

 

Welders

 

MILLER DELTAWELD 450 ON ROLLER CART WITH MILLERMATIC S-32S WIRE FEED ON ROLLER CART, SN JC632413, 100% DUTY CYCLE

 

MILLER SPECTRUM 750 DC PLASMA CUTTER, SN KE619357, STOCK 903194, 230/460/575 VOLTS

 

MILLER CP-300 WELDER WITH MILLER WIRE FEED, SN JJ436918, STOCK 902931, 100% DUTY CYCLE

 

MILLER GOLD STAR 600SS ARC WELDER, SN JB529428, 60% DUTY CYCLE

 

 

 

 

 

MACHINE SHOP

 

Lathes

 

AXELSON 18"x69" LATHE, 20.5" SWING, 10' BED LENGTH, 72" CENTERS, 8-808 RPM SPINDLE SPEED, SN 3233, WITH ALORIS STYLE QUICK CHANGE TOOL POST, 18" 4-JAW CHUCK, 10" 3-JAW CHUCK, 5", 6", 10" STEADY RESTS, 10' & 15" FACE PLATES

 

AMERICAN PACEMAKER 20"x72" LATHE, 20-1200 RPM, 23" SWING OVER WAYS, 18" 4-JAW CHUCK, 12" STEADY REST, 19" FACE PLATE,

 

CINCINNATI 20"x200" LATHE, SN 3307, 200" CENTERS, TAPER ATT. , 20" SWING, 16" 4-JAW CHUCK, ALORIS STYLE TOOL POST, 12" & 6" STEADY

 

LODGE & SHIPLEY 32"x240" LATHE, 32.25" SWING OVER WAYS, 247.5" SWING OVER CROSS SLIDE, 240" CENTERS, 9-500 RPM, 24" 4-JAW CHUCK, 31" FACE PLATE,

 

Mills

 

CINCINNATI NO 3 HORZ MILL, SN 4A3P1J-107, 18-1300 RPM, 15"x62.5" OVERALL TABLE SIZE

 

CINCINNATI #2 HORZ MILL, 12"x52" TABLE, 20-1500 RPM SPINDLE SPEED, SN 4A2P1L-73

 

SAIMP TVA-1 VERTICAL MILL, MODEL S, SN 2095, 100-2800 RPM SPINDLE SPEED, 10"x44" TABLE

 

BRIDGEPORT VERT MILL, SN 128908, 9"x42" TABLE, WITH SERVO X-AXIS POWER FEEDS, WITH COLLETS & RACK

 

ALSO

 

MITTS & MERRILL HYDRAULIC KEYSEATER, MODEL 2-HFRD-KS, SN KM-7621, MAX LENGTH 12", MAX WIDTH 1.25", LARGEST STANDARD POST 2-3/8"

 

CINCINNATI BICKFORD RADIAL ARM DRILL, 11" COLUMN, 5' ARM, SN 2E1094, WITH 18"x24"x13" BOX TABLE,

 

OLIVER DRILL GRINDER

 

CINCINNATI #2 TOOL & CUTTER GRINDER

 

 

 

 

Inspection

Starrett micrometers with standards, Mitutoyo 6”-12” mic set, dial indicators, calipers

 

 

ALSO

 

CAT V60B 6,000 LB FORKLIFT, DOUBLE MAST, LP, SOLID TIRE, 127” LIFT

 

BRODERSON 10 TON ROUGH TERRAIN CRANE, MODEL IC80 1B, SN 109298, 4587 HOURS, DIESEL

 

INDUSTRIAL AIR MACHINE AIR COMPRESSOR, 5 HP

 

JACOBS SPINDLE NOSE LATHE CHUCK, WITH RUBBER FLEX COLLET SETS

 

INDEXING HEADS

 

ROTARY TABLES

 

QUICK CHANGE TOOLING

 

TAPER TOOLING, END MILLS, BORING BARS, TAPER SHANK DRILLS, TAPS, DIES

 

VISES

 

ANGLE PLATES

 

NEW METAL STOCK INCLUDING STAINLESS, IN ROUNDS, FLAT, KEYS STOCK, ETC

 

PEDESTAL GRINDERS

 

 
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
East Bank Machine
 Live Auction w/Online Bidding
Auction Date(s)
Wednesday Mar 4, 2020 Completed
Auction Location

Elizabeth, PA 15037
Company
Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Website: www.hartlandauctions.com

Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day of the sale, unless a wire transfer is required. The wire transfer shall be sent no later than the next business day by 3:00 PM. 2.Purchases shall be paid for with cash, WV, PA or Ohio co. checks, credit card or wire transfer. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer’s Premium of 12% applies to all lots sold in-house, 15% online. 3% surcharge for credit cards 6.$5 minimum bid. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.All machines are either disconnected at the plug or at the quick disconnect box, box not included. 12.Removal dates and times: After the end of the auction until 5:00 pm. Weekdays from 9 am to 4 pm, for dates to be announced by auctioneer. All other dates by appointment only. Call auctioneer to schedule. Items not picked up will be considered abandoned, unless prior arrangements have been made with the auctioneer. Storage fees will apply for items picked up after three weeks. Call or see auctioneer for details. Additional $150 per day fee for checkout on the day you pick up. 13.NSF or stop payment checks are subject to a $35.00 returned check fee
File Attachments
Catalog Flyer

Preview Tuesday, March 3, from 9 am to 3 pm

 

 online bidding available through Bidspotter.com

TERMS: Items sold as is, where is, how is. An 12% buyer’s premium applies to all lots sold in-house, 15% online. Accepted payments include credit card (with 3% surcharge fee), cash, company check (PA, OH, or WV checks), bank letter of credit with out-of-state checks, or wire transfer.

 

IMPORTANT INFORMATION: THE AUCTIONEER MAKES NO WARRANTY OR GUARANTEE, EXPRESSED OR IMPLIED, AS TO THE ACCURACY OF THE INFORMATION HEREIN CONTAINED. IT IS FOR THIS REASON THAT BUYERS SHOULD INSPECT ALL ITEMS PRIOR TO BIDDING. THE BROCHURE IS INTENDED TO PROVIDE GENERAL INFORMATION OF THE EQUIPMENT BEING OFFERED AND IS SUBJECT TO ERRORS, OMISSIONS, ADDITIONS OR DELETIONS. COMPETE AUCTION CATALOGS WILL BE AVAILABLE THE DAY OF THE AUCTION. ITEMS OFFERED MAY OR MAY NOT NECESSARILY BE SOLD AS DESCRIBED AND/OR PHOTOGRAPHED.

 

 

Fabricating & Welding

 

ROCKFORD HYDRAULIC SLOTTER, MO SA, SN 87 SA 64, 28" TABLE, 20" STROKE, PENDANT CONTROL,

 

ROCKFORD HYDRAULIC 24" SHAPER

 

SPEEDAIRE 9 GALLON SANDBLAST POT & ACCESSORIES

 

DAKE H-FRAME PRESS, 44" BETWEEN UPRIGHTS

 

GREENERD NO 4 ARBOR PRESS

 

ULTRA-GRAPH HEATH SHAPE CUTTER WITH ESAB TORCHES

 

NCG CUT-O-MATIC TRACK BURNER

 

TORCH CART & HOSES

 

16"x45"x3/8" METAL TABLE

 

30"x36"x1/4" METAL TABLE

 

41"x31.5" METAL TABLE

 

64.5"x70"x5/8" METAL LAYOUT TABLE WITH CABINETS

 

Saws

 

WELLSAW HORZ BAND SAW

 

GROB VERTICAL BAND SAW, 18" THROAT, 12" UNDER GUIDE, 24"x24" TABLE, WITH BLADE WELDER

 

Welders

 

MILLER DELTAWELD 450 ON ROLLER CART WITH MILLERMATIC S-32S WIRE FEED ON ROLLER CART, SN JC632413, 100% DUTY CYCLE

 

MILLER SPECTRUM 750 DC PLASMA CUTTER, SN KE619357, STOCK 903194, 230/460/575 VOLTS

 

MILLER CP-300 WELDER WITH MILLER WIRE FEED, SN JJ436918, STOCK 902931, 100% DUTY CYCLE

 

MILLER GOLD STAR 600SS ARC WELDER, SN JB529428, 60% DUTY CYCLE

 

 

 

 

 

MACHINE SHOP

 

Lathes

 

AXELSON 18"x69" LATHE, 20.5" SWING, 10' BED LENGTH, 72" CENTERS, 8-808 RPM SPINDLE SPEED, SN 3233, WITH ALORIS STYLE QUICK CHANGE TOOL POST, 18" 4-JAW CHUCK, 10" 3-JAW CHUCK, 5", 6", 10" STEADY RESTS, 10' & 15" FACE PLATES

 

AMERICAN PACEMAKER 20"x72" LATHE, 20-1200 RPM, 23" SWING OVER WAYS, 18" 4-JAW CHUCK, 12" STEADY REST, 19" FACE PLATE,

 

CINCINNATI 20"x200" LATHE, SN 3307, 200" CENTERS, TAPER ATT. , 20" SWING, 16" 4-JAW CHUCK, ALORIS STYLE TOOL POST, 12" & 6" STEADY

 

LODGE & SHIPLEY 32"x240" LATHE, 32.25" SWING OVER WAYS, 247.5" SWING OVER CROSS SLIDE, 240" CENTERS, 9-500 RPM, 24" 4-JAW CHUCK, 31" FACE PLATE,

 

Mills

 

CINCINNATI NO 3 HORZ MILL, SN 4A3P1J-107, 18-1300 RPM, 15"x62.5" OVERALL TABLE SIZE

 

CINCINNATI #2 HORZ MILL, 12"x52" TABLE, 20-1500 RPM SPINDLE SPEED, SN 4A2P1L-73

 

SAIMP TVA-1 VERTICAL MILL, MODEL S, SN 2095, 100-2800 RPM SPINDLE SPEED, 10"x44" TABLE

 

BRIDGEPORT VERT MILL, SN 128908, 9"x42" TABLE, WITH SERVO X-AXIS POWER FEEDS, WITH COLLETS & RACK

 

ALSO

 

MITTS & MERRILL HYDRAULIC KEYSEATER, MODEL 2-HFRD-KS, SN KM-7621, MAX LENGTH 12", MAX WIDTH 1.25", LARGEST STANDARD POST 2-3/8"

 

CINCINNATI BICKFORD RADIAL ARM DRILL, 11" COLUMN, 5' ARM, SN 2E1094, WITH 18"x24"x13" BOX TABLE,

 

OLIVER DRILL GRINDER

 

CINCINNATI #2 TOOL & CUTTER GRINDER

 

 

 

 

Inspection

Starrett micrometers with standards, Mitutoyo 6”-12” mic set, dial indicators, calipers

 

 

ALSO

 

CAT V60B 6,000 LB FORKLIFT, DOUBLE MAST, LP, SOLID TIRE, 127” LIFT

 

BRODERSON 10 TON ROUGH TERRAIN CRANE, MODEL IC80 1B, SN 109298, 4587 HOURS, DIESEL

 

INDUSTRIAL AIR MACHINE AIR COMPRESSOR, 5 HP

 

JACOBS SPINDLE NOSE LATHE CHUCK, WITH RUBBER FLEX COLLET SETS

 

INDEXING HEADS

 

ROTARY TABLES

 

QUICK CHANGE TOOLING

 

TAPER TOOLING, END MILLS, BORING BARS, TAPER SHANK DRILLS, TAPS, DIES

 

VISES

 

ANGLE PLATES

 

NEW METAL STOCK INCLUDING STAINLESS, IN ROUNDS, FLAT, KEYS STOCK, ETC

 

PEDESTAL GRINDERS