Bankruptcy Auction: Biotechnology Research Lab Equipment
Previous Page Listing ID#: 1671234

Auction Location

Monmouth Jct, NJ 08852
Auction Dates and TimesSALE IS COMPLETED
Sunday Nov 3, 2024 Completed
Thursday Nov 7, 2024 Completed
Auction Type
 Live Auction  VIEW ONLINE CATALOG
Company Information
AuctionAdvisors

Contact: Oren Klein
Phone: 973-753-1313
Website: www.auctionadvisors.com

GoToAuction.com ID#: 6687
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Auction Terms & Conditions of Bidder Participation Thank you for your interest in this Online Auction. These are the Terms and Conditions on which all property is offered for sale, subject to amendments and modifications announced by the Auctioneer at the time of the auction and posted on the website. By bidding in this auction, prospective bidders agree to be bound by and comply with the following Terms & Conditions and acknowledge and agree that they are being allowed to participate at this auction in reliance on such agreement. 1. REGISTRATION. Bidders must be registered with: www.bidspotter.com and approved for bidding by auctioneer. By registering you represent and warrant that any and all Buyer information is correct. Auctioneer reserves the right to deny any registered bidder at any time at its sole discretion without notification. 2. INSPECTIONS: Bidders may inspect the Lots/offering at 1 Deerpark Dr, Monmouth Junction, NJ 08852 on Friday, November 1st & Saturday, November 2nd from 12PM to 2PM. Please contact Joe by email (jcamilleri@auctionadvisors.com) or call/text (908) 329-7877 to set up an inspection time. 3. AS-IS WHERE-IS SALE. ALL SALES ARE FINAL, ON AN "AS IS, WHERE IS", "IN PLACE", "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, ORAL ANNOUNCEMENT OR OTHERWISE. 4. DESCRIPTIONS NOT TO BE RELIED UPON. THE AUCTION CATALOGUE IS MERELY A GUIDE. DESCRIPTIONS AND QUANTITIES HAVE BEEN PREPARED IN GOOD FAITH FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY, GENUINENESS, AUTHENTICITY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. IN ADDITION, AUCTIONEER RESERVES THE RIGHT TO ADD, ALTER, OR REMOVE ANY ITEM(S) TO OR FROM THE AUCTION AT ANY TIME. 5. PAYMENT IN FULL. Invoices for payment of full amount owed will be issued promptly after the auction. All invoiced amounts must be paid in full immediately but in no event later than the second business day after the auction. TIME IS OF-THE -ESSENCE with respect to such date. NOTHING SHALL BE REMOVED FROM THE PREMISES UNLESS AND UNTIL A BIDDER HAS PAID ALL OF ITS INVOICES IN FULL. BUYERS ARE ENCOURAGED TO PAY INVOICES ONLINE PRIOR TO PICK UP. 6. FORM OF PAYMENT. No personal or business checks will be accepted unless pre-approved by Auctioneer. Only cash, cashier's checks, wire transfer, pre-approved business checks and credit cards (only up to $2,000 - see additional fees below) will be accepted. 7. CREDIT CARD FEE. Payments by way of Credit Card will ONLY be accepted for purchases which do not exceed $2,000, subject to Auctioneer's discretion. An administration fee of 4% shall apply to credit card purchases. 8. REMOVAL TIMES TO BE SET BY AUCTIONEER. Removal of lots shall take place starting Monday, November 11th and continue through Wednesday, November 13th. Removal times on these days shall be from 10:00 AM to 4:00 PM EST. You MUST schedule your appointment with Joe prior to arrival. 9. REMOVAL MUST BE DONE IN A COMMERCIALLY REASONABLE MANNER. All successful bidders and/or their agents must sign a Waiver & Release prior to any dismantling or removal which must be done in a commercially reasonable fashion. It is preferred that all Buyers use a professional rigging company with proof of insurance. 10. REMOVAL AT BIDDERS RISK, COST AND EXPENSE. All items must be removed by the successful bidder at their own risk, cost and expense. Any damage caused in connection with the dismantling, packing and/or removing any item shall be the responsibility of such bidder, whether such damage is to the item itself, to any other item, or to the premises or any third party, or third party property. There is limited material handling equipment, tools or labor available at the auction site - all successful bidders must supply their own and/or may use the limited resources available for a service fee. After the time frame set forth on Auctioneer schedule of move-out dates, the Auctioneer will no longer be responsible. Please be forewarned that in the case of a default, the auction company reserves the right to resell any and all unclaimed items and the defaulting bidder will not only forfeit his deposit but bear the responsibility of any shortfall in case of resale, and also all costs and expenses associated with the default as well as all auctioneer's fees and commissions. *PLEASE NOTE: BUYER SOLELY RESPONSIBLE FOR PACKING & PICKUP. Please Note: The Auctioneer does not pack, ship, store, crate or rig items. Buyers may either pick up their items at the designated auction site personally or can arrange for a third-party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must contract with an independent logistics firm or other representative who will dismantle, crate, pack, load and/or ship your purchased items; coordinate the removal of those purchased items to meet the time deadlines indicated of this auction and authorize the auction company to release items to a third-party contractor for shipping, crating or packing purposes. Since the Auctioneer does not ship the items, we do not obtain/prepare any export licenses/documents. Further, the auction company is not affiliated with any machinery rigging, transport or export company. We provide the names and contact information of available companies solely as a courtesy to our buyers. The auction company does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage, omission or other problems incurred as a result of the actions of those companies. 11. ALL BIDS ARE FINAL. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke their bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received and buyer has taken possession and removed any purchased lots from the premises. 12. BUYER'S PREMIUM. An fifteen percent (15%) buyer's premium is in effect for all successful bidders at this auction. 13. AUCTIONEER FINAL ARBITER. The Auctioneer is the final judge in case of a dispute. The final posting on auction day made by the auctioneer will take precedence over any previously printed materials. Auctioneer has the right at its sole and absolute discretion (should Auctioneer so choose to exercise it) to reject any and all bids Auctioneer deems unreasonable, entertain a bulk bid, a mini bulk bid or any package of lots. Further, Auctioneer may at its sole discretion set and/or alter bidding increments at any time. 14. BIDDER PARTICIPATION AT DISCRETION OF AUCTIONEER. All bidders must be at least 21 years of age. The auctioneer reserves the right to deny admission to the auction to any person the auctioneer deems to be abusive, disorderly, intoxicated or non-compliant with the terms and conditions for the auction, or a potential threat to be such or any individual who the Auctioneer, at its sole discretion, deems to be potentially disruptive to the auction or who the Auctioneer believes, at its discretion, cannot reasonably be relied upon to comply with these Terms & Conditions. The auctioneer also reserves the right to deny registration to any online bidder who does not qualify to bid. All sales subject to the approval of the Bankruptcy Trustee and the Bankruptcy Court.
Listing Information
This auction will take place on Bidspotter.com! You can find the full catalog and register to bid here: https://www.bidspotter.com/en-us/auction-catalogues/bscauction/catalogue-id-auctio15-10011 AuctionAdvisors has been retained to liquidate high-value, top-of-the-line laboratory equipment, including sophisticated analytical instruments for chromatography and mass spectrometry, large-scale chemical reactors, advanced bioprocessing centrifuges, state-of-the-art autoclave and much more. This premium selection of equipment represents a significant investment in advanced technology, ideally suited for a research institution or advanced laboratory seeking to enhance capabilities and efficiency. This opportunity offers significant cost savings on premium equipment. Don�t miss out on this chance to acquire high-quality, well-maintained laboratory assets!

10
Switches, Routers, PBX Phone System and More
Dell LCD monitor, HPE Office Connect 1820 Series Switch J9980A, Sophos XGS 126 security appliance Cradlepoint AER1650LP4 4 port Ethernet router, Netgear ProSAFE JGS524PE switch, 2 APC Back-UPS. 8 Panasonic KX-DT343 IP telephones, Panasonic KX-TDA200 ...

11
Conference Room Furniture, Fire Cabinet
Conference table, round table, credenza, whiteboard, 5 metal swivel arm chairs, arm chair, Phoenix 2 door fire resistant cabinet w/key, Dell 1510X DLP Projector (mounted)

12
Conference Room Furniture, 75" TV, Dry Erase Board
16' Conference table w/matching 72" credenza, 16- metal upholstered swivel arm chairs, coat tree, Samsung model UN75RU8000FXZA 75" LED 4K Smart Tizen TV, Global glass dry erase board, 48" x 96"

13
Office and All Contents
Includes Desks, Chairs, Whiteboards


15
Office and All Contents
Includes 42" diameter Formica table



18
Breakroom / Kitchen and All Contents
Includes Whirlpool French door refrigerator/freezer, Nespresso espresso machine, Sharp 1000w microwave oven

150
FreeZone 2.5 Liter -50C Benchtop Freeze Dryer
FreeZone Benchtop Freeze Dryer APPEARS to be new or professionally refurbished. Wrapped and in a box. Also includes (3) Edwards Rotary Vane Vacuums.







200
KrosFlo KMPi TTF System
Includes peristaltic pump, backpressure valve, and platform scales. 900-2460

201
KrosFlo KR2i TTF System
Includes peristaltic pump, KRJr Pump and scales. 900-2039

202
Chemglass 50L Chemical Lab Jacketed Glass Reactor
Includes Chemglass CG-2033-B-25 overhead motor, Chemglass CG-2077-M stir bearings, Chemglass CG-2033-V digital controller, Huber CC-508 with Pilot ONE refrigerated heating circulator, plus all adapters and accessories. Manufacturer Date: 09-29-2020

203
Chemglass 50L Chemical Lab Jacketed Glass Reactor
Includes Chemglass CG-2033-B-25 overhead motor, Chemglass CG-2077-M stir bearings, Chemglass CG-2033-V digital controller, Huber CC-508 with Pilot ONE refrigerated heating circulator, plus all adapters and accessories. Manufacturer Date: 09-29-2020







210
Repligen SUIS-PD TSLDI-2BMC 2 Bolt Manual Clamp
Repligen SUIS-PD TSLDI-2BMC 2 Bolt Manual Clamp C/N: TSLDI-2BMC B/N: 20015283 SIUS-PD Filter Plate Insert with Mini T/C C/N: TFPLS-SA08 B/N: 20071890

211
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20013489 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20031345

212
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20013489 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20031345

213
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20007495 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20031345

214
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20028589 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20053175







302
Chemlass 500mL Glass Reactor Vessels (Qty 3)
Includes overhead mixer, vacuum pump, circulators, peristaltic pump, plus all adapters and accessories photographed.

303
Chemlass 100L Chemical Lab Jacketed Glass Reactor
Manufacturer Date: 2-23-2022 Includes overhead motor, stir bearings, digital controller, dynamic temperature control, plus all adapters and accessories.

304
Chemlass 100L Chemical Lab Jacketed Glass Reactor
Manufacturer Date: 2-23-2022 Includes overhead motor, stir bearings, digital controller, dynamic temperature control, plus all adapters and accessories.


306
Sartorius Analytical Balance
Model: SECURA224-1NUS Manufacturer Date: 06-21-2021


353
VWR Shaking Water Bath
Model: 10128-126


355
Particle Counter and Invitrogen Power Supply
Lot includes: (1) Particle Measuring System APSS-2000 & (1) Invitrogen PowerEase Touch PS0120 Power Supply






361
Digital Microtiter, Rotator, Fluid Aspirators
Lot includes: (1) IKA Digital Microtiter, (1) Benchmark Roto-Bot R4040 Programmable Rotator & (2) Vacuubrand BVC Control Fluid Aspiration Systems

362
Labconco Biosafety Cabinet
Model: 302419101 Length: 4'

363
Labconco Biosafety Cabinet
Model: 302419101 Length: 3'


402
Mettler Toledo SevenDirect SD20 Ph Meter Kit
Include Mettler Toledo label printer

403
MBraun LABstar Pro InertGas Glove Box Workstation
Includes MBraun Foot Swtich and Edwards Dry Scroll Pump



406
Bio-Rad BioLogic / BioFrac Systems (Qty 4)
Lot includes: (3) Bio-Rad BioLogic LP Chromatography Systems with Bio-Rad BioFrac Fraction Collectors and (1) Standalone Bio-Rad BioFrac Fraction Collector




410
Digital Shaking Drybath and Centrifuge
Lot Includes: (3) Thermo Fisher Digital Shaking Drybath (Model: 88880027) and (1) Eppendorf 5425 Centrifuge.




454
Agilent Technologies Cary 5000 Spectrophotometer
Includes table and computer workstation.

455
Wyatt DynaPro Dynamic Light Scattering System
Model: WPR3-01 Includes computer workstation

456
Molecular Devices SpectraMax iD3
Includes Surface Notebook Computer

457
Alliance Waters E2695 HPLC Separation Module
Includes 2998 PDA Detector, 2424 ELS Detector, VWR Nitrogen Generation System and computer workstation.

458
Water Acquity H-Class Plus BioSample Manager
Includes Water Acquity H-Class plus BioQuaternary Solvent Manager, Water Acquity CH-A, Water Acquity QDa Detector, Water Acquity PDAe Detector, Vacuum Pump and computer workstation.



552
JustRite Flammable Liquid Storage Cabinet 90gal
Broken latch, door off, hole in back


554
Thermal Scientific Heraeus Multitude X1R
Refrigerated benchtop centrifuge











650
Powerex Air Compressor and Kaeser Air Dryer
Includes Powerex OTS110254 Air Compressor and Kaeser HTRD20 Refrigerated Air Dryer






656
Assorted Lab Supplies and Electronics
Includes: Glove box, clamps, transformers, Razel testers


658
Michelin Portable Foot Pump (Qty 4) and
ChemglassBeam Torque Wrench (Qty 5)

700
Bulk Lot Of Medical Consumables
This is a BULK lot of medical consumables including (but not limited to) pipette tips, vials, test tubes, syringes, filters, silicon tubes. Manufactures include (but not limited to) Millipore, Cytiva, VWR, Henke Sass Wolf, Corning, BD Needle, Replige...

701
Bulk Lot Of Medical Consumables
This is a BULK lot of medical consumables including (but not limited to) pipette tips, vials, test tubes, syringes, filters, barrier tips, cell/tissue culture plates/flasks, combitips, solutions/infusion sets, vial shields. Manufactures include (but...

702
Bulk Lot Of Medical Consumables
This is a BULK lot of medical consumables including (but not limited to) garments, lab coats, boot covers, tube racks, centrifuge tubes, polysulfone pressure transducers, glass pipets, cap assemblies, roller bottles, pipet tips, BPT tubing, vacuum fi...

703
Wire Racks and Metal Shelving (Qty 15)
THIS LOT INLCUDES ONLY THE SHELVING/RACKING UNITS. THIS LOT WILL BE PICKED UP LAST AFTER ALL CONTENTS LOCATED ON THE RACKS/SHELVES HAVE BEEN PICKED UP.

704
Wire Racks (Qty 10)
THIS LOT INLCUDES ONLY THE RACKS. THIS LOT WILL BE PICKED UP LAST AFTER ALL CONTENTS LOCATED ON THE RACKS HAVE BEEN PICKED UP.

705
Wire Racks (Qt 12)
THIS LOT INLCUDES ONLY THE RACKS. THIS LOT WILL BE PICKED UP LAST AFTER ALL CONTENTS LOCATED ON THE RACKS HAVE BEEN PICKED UP.

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Nov 26
Mt Vernon, NY



Sponsored Links

Bankruptcy Auction: Biotechnology Research Lab Equipment

AuctionAdvisors

AuctionAdvisors


Contact: Oren Klein
Phone: 973-753-1313
Sale Location
1 Deerpark Dr
Monmouth Jct, NJ 08852
Sale Dates and Times
Sunday Nov 3, 2024 Completed
Thursday Nov 7, 2024 Completed
Sale Terms and Conditions
Auction Terms & Conditions of Bidder Participation Thank you for your interest in this Online Auction. These are the Terms and Conditions on which all property is offered for sale, subject to amendments and modifications announced by the Auctioneer at the time of the auction and posted on the website. By bidding in this auction, prospective bidders agree to be bound by and comply with the following Terms & Conditions and acknowledge and agree that they are being allowed to participate at this auction in reliance on such agreement. 1. REGISTRATION. Bidders must be registered with: www.bidspotter.com and approved for bidding by auctioneer. By registering you represent and warrant that any and all Buyer information is correct. Auctioneer reserves the right to deny any registered bidder at any time at its sole discretion without notification. 2. INSPECTIONS: Bidders may inspect the Lots/offering at 1 Deerpark Dr, Monmouth Junction, NJ 08852 on Friday, November 1st & Saturday, November 2nd from 12PM to 2PM. Please contact Joe by email (jcamilleri@auctionadvisors.com) or call/text (908) 329-7877 to set up an inspection time. 3. AS-IS WHERE-IS SALE. ALL SALES ARE FINAL, ON AN "AS IS, WHERE IS", "IN PLACE", "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, ORAL ANNOUNCEMENT OR OTHERWISE. 4. DESCRIPTIONS NOT TO BE RELIED UPON. THE AUCTION CATALOGUE IS MERELY A GUIDE. DESCRIPTIONS AND QUANTITIES HAVE BEEN PREPARED IN GOOD FAITH FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY, GENUINENESS, AUTHENTICITY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. IN ADDITION, AUCTIONEER RESERVES THE RIGHT TO ADD, ALTER, OR REMOVE ANY ITEM(S) TO OR FROM THE AUCTION AT ANY TIME. 5. PAYMENT IN FULL. Invoices for payment of full amount owed will be issued promptly after the auction. All invoiced amounts must be paid in full immediately but in no event later than the second business day after the auction. TIME IS OF-THE -ESSENCE with respect to such date. NOTHING SHALL BE REMOVED FROM THE PREMISES UNLESS AND UNTIL A BIDDER HAS PAID ALL OF ITS INVOICES IN FULL. BUYERS ARE ENCOURAGED TO PAY INVOICES ONLINE PRIOR TO PICK UP. 6. FORM OF PAYMENT. No personal or business checks will be accepted unless pre-approved by Auctioneer. Only cash, cashier's checks, wire transfer, pre-approved business checks and credit cards (only up to $2,000 - see additional fees below) will be accepted. 7. CREDIT CARD FEE. Payments by way of Credit Card will ONLY be accepted for purchases which do not exceed $2,000, subject to Auctioneer's discretion. An administration fee of 4% shall apply to credit card purchases. 8. REMOVAL TIMES TO BE SET BY AUCTIONEER. Removal of lots shall take place starting Monday, November 11th and continue through Wednesday, November 13th. Removal times on these days shall be from 10:00 AM to 4:00 PM EST. You MUST schedule your appointment with Joe prior to arrival. 9. REMOVAL MUST BE DONE IN A COMMERCIALLY REASONABLE MANNER. All successful bidders and/or their agents must sign a Waiver & Release prior to any dismantling or removal which must be done in a commercially reasonable fashion. It is preferred that all Buyers use a professional rigging company with proof of insurance. 10. REMOVAL AT BIDDERS RISK, COST AND EXPENSE. All items must be removed by the successful bidder at their own risk, cost and expense. Any damage caused in connection with the dismantling, packing and/or removing any item shall be the responsibility of such bidder, whether such damage is to the item itself, to any other item, or to the premises or any third party, or third party property. There is limited material handling equipment, tools or labor available at the auction site - all successful bidders must supply their own and/or may use the limited resources available for a service fee. After the time frame set forth on Auctioneer schedule of move-out dates, the Auctioneer will no longer be responsible. Please be forewarned that in the case of a default, the auction company reserves the right to resell any and all unclaimed items and the defaulting bidder will not only forfeit his deposit but bear the responsibility of any shortfall in case of resale, and also all costs and expenses associated with the default as well as all auctioneer's fees and commissions. *PLEASE NOTE: BUYER SOLELY RESPONSIBLE FOR PACKING & PICKUP. Please Note: The Auctioneer does not pack, ship, store, crate or rig items. Buyers may either pick up their items at the designated auction site personally or can arrange for a third-party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must contract with an independent logistics firm or other representative who will dismantle, crate, pack, load and/or ship your purchased items; coordinate the removal of those purchased items to meet the time deadlines indicated of this auction and authorize the auction company to release items to a third-party contractor for shipping, crating or packing purposes. Since the Auctioneer does not ship the items, we do not obtain/prepare any export licenses/documents. Further, the auction company is not affiliated with any machinery rigging, transport or export company. We provide the names and contact information of available companies solely as a courtesy to our buyers. The auction company does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage, omission or other problems incurred as a result of the actions of those companies. 11. ALL BIDS ARE FINAL. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke their bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received and buyer has taken possession and removed any purchased lots from the premises. 12. BUYER'S PREMIUM. An fifteen percent (15%) buyer's premium is in effect for all successful bidders at this auction. 13. AUCTIONEER FINAL ARBITER. The Auctioneer is the final judge in case of a dispute. The final posting on auction day made by the auctioneer will take precedence over any previously printed materials. Auctioneer has the right at its sole and absolute discretion (should Auctioneer so choose to exercise it) to reject any and all bids Auctioneer deems unreasonable, entertain a bulk bid, a mini bulk bid or any package of lots. Further, Auctioneer may at its sole discretion set and/or alter bidding increments at any time. 14. BIDDER PARTICIPATION AT DISCRETION OF AUCTIONEER. All bidders must be at least 21 years of age. The auctioneer reserves the right to deny admission to the auction to any person the auctioneer deems to be abusive, disorderly, intoxicated or non-compliant with the terms and conditions for the auction, or a potential threat to be such or any individual who the Auctioneer, at its sole discretion, deems to be potentially disruptive to the auction or who the Auctioneer believes, at its discretion, cannot reasonably be relied upon to comply with these Terms & Conditions. The auctioneer also reserves the right to deny registration to any online bidder who does not qualify to bid. All sales subject to the approval of the Bankruptcy Trustee and the Bankruptcy Court.
Listing Details
This auction will take place on Bidspotter.com! You can find the full catalog and register to bid here: https://www.bidspotter.com/en-us/auction-catalogues/bscauction/catalogue-id-auctio15-10011 AuctionAdvisors has been retained to liquidate high-value, top-of-the-line laboratory equipment, including sophisticated analytical instruments for chromatography and mass spectrometry, large-scale chemical reactors, advanced bioprocessing centrifuges, state-of-the-art autoclave and much more. This premium selection of equipment represents a significant investment in advanced technology, ideally suited for a research institution or advanced laboratory seeking to enhance capabilities and efficiency. This opportunity offers significant cost savings on premium equipment. Don�t miss out on this chance to acquire high-quality, well-maintained laboratory assets!

10
Switches, Routers, PBX Phone System and More
Dell LCD monitor, HPE Office Connect 1820 Series Switch J9980A, Sophos XGS 126 security appliance Cradlepoint AER1650LP4 4 port Ethernet router, Netgear ProSAFE JGS524PE switch, 2 APC Back-UPS. 8 Panasonic KX-DT343 IP telephones, Panasonic KX-TDA200 ...

11
Conference Room Furniture, Fire Cabinet
Conference table, round table, credenza, whiteboard, 5 metal swivel arm chairs, arm chair, Phoenix 2 door fire resistant cabinet w/key, Dell 1510X DLP Projector (mounted)

12
Conference Room Furniture, 75" TV, Dry Erase Board
16' Conference table w/matching 72" credenza, 16- metal upholstered swivel arm chairs, coat tree, Samsung model UN75RU8000FXZA 75" LED 4K Smart Tizen TV, Global glass dry erase board, 48" x 96"

13
Office and All Contents
Includes Desks, Chairs, Whiteboards


15
Office and All Contents
Includes 42" diameter Formica table



18
Breakroom / Kitchen and All Contents
Includes Whirlpool French door refrigerator/freezer, Nespresso espresso machine, Sharp 1000w microwave oven

150
FreeZone 2.5 Liter -50C Benchtop Freeze Dryer
FreeZone Benchtop Freeze Dryer APPEARS to be new or professionally refurbished. Wrapped and in a box. Also includes (3) Edwards Rotary Vane Vacuums.







200
KrosFlo KMPi TTF System
Includes peristaltic pump, backpressure valve, and platform scales. 900-2460

201
KrosFlo KR2i TTF System
Includes peristaltic pump, KRJr Pump and scales. 900-2039

202
Chemglass 50L Chemical Lab Jacketed Glass Reactor
Includes Chemglass CG-2033-B-25 overhead motor, Chemglass CG-2077-M stir bearings, Chemglass CG-2033-V digital controller, Huber CC-508 with Pilot ONE refrigerated heating circulator, plus all adapters and accessories. Manufacturer Date: 09-29-2020

203
Chemglass 50L Chemical Lab Jacketed Glass Reactor
Includes Chemglass CG-2033-B-25 overhead motor, Chemglass CG-2077-M stir bearings, Chemglass CG-2033-V digital controller, Huber CC-508 with Pilot ONE refrigerated heating circulator, plus all adapters and accessories. Manufacturer Date: 09-29-2020







210
Repligen SUIS-PD TSLDI-2BMC 2 Bolt Manual Clamp
Repligen SUIS-PD TSLDI-2BMC 2 Bolt Manual Clamp C/N: TSLDI-2BMC B/N: 20015283 SIUS-PD Filter Plate Insert with Mini T/C C/N: TFPLS-SA08 B/N: 20071890

211
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20013489 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20031345

212
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20013489 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20031345

213
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20007495 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20031345

214
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20028589 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20053175







302
Chemlass 500mL Glass Reactor Vessels (Qty 3)
Includes overhead mixer, vacuum pump, circulators, peristaltic pump, plus all adapters and accessories photographed.

303
Chemlass 100L Chemical Lab Jacketed Glass Reactor
Manufacturer Date: 2-23-2022 Includes overhead motor, stir bearings, digital controller, dynamic temperature control, plus all adapters and accessories.

304
Chemlass 100L Chemical Lab Jacketed Glass Reactor
Manufacturer Date: 2-23-2022 Includes overhead motor, stir bearings, digital controller, dynamic temperature control, plus all adapters and accessories.


306
Sartorius Analytical Balance
Model: SECURA224-1NUS Manufacturer Date: 06-21-2021


353
VWR Shaking Water Bath
Model: 10128-126


355
Particle Counter and Invitrogen Power Supply
Lot includes: (1) Particle Measuring System APSS-2000 & (1) Invitrogen PowerEase Touch PS0120 Power Supply






361
Digital Microtiter, Rotator, Fluid Aspirators
Lot includes: (1) IKA Digital Microtiter, (1) Benchmark Roto-Bot R4040 Programmable Rotator & (2) Vacuubrand BVC Control Fluid Aspiration Systems

362
Labconco Biosafety Cabinet
Model: 302419101 Length: 4'

363
Labconco Biosafety Cabinet
Model: 302419101 Length: 3'


402
Mettler Toledo SevenDirect SD20 Ph Meter Kit
Include Mettler Toledo label printer

403
MBraun LABstar Pro InertGas Glove Box Workstation
Includes MBraun Foot Swtich and Edwards Dry Scroll Pump



406
Bio-Rad BioLogic / BioFrac Systems (Qty 4)
Lot includes: (3) Bio-Rad BioLogic LP Chromatography Systems with Bio-Rad BioFrac Fraction Collectors and (1) Standalone Bio-Rad BioFrac Fraction Collector




410
Digital Shaking Drybath and Centrifuge
Lot Includes: (3) Thermo Fisher Digital Shaking Drybath (Model: 88880027) and (1) Eppendorf 5425 Centrifuge.




454
Agilent Technologies Cary 5000 Spectrophotometer
Includes table and computer workstation.

455
Wyatt DynaPro Dynamic Light Scattering System
Model: WPR3-01 Includes computer workstation

456
Molecular Devices SpectraMax iD3
Includes Surface Notebook Computer

457
Alliance Waters E2695 HPLC Separation Module
Includes 2998 PDA Detector, 2424 ELS Detector, VWR Nitrogen Generation System and computer workstation.

458
Water Acquity H-Class Plus BioSample Manager
Includes Water Acquity H-Class plus BioQuaternary Solvent Manager, Water Acquity CH-A, Water Acquity QDa Detector, Water Acquity PDAe Detector, Vacuum Pump and computer workstation.



552
JustRite Flammable Liquid Storage Cabinet 90gal
Broken latch, door off, hole in back


554
Thermal Scientific Heraeus Multitude X1R
Refrigerated benchtop centrifuge











650
Powerex Air Compressor and Kaeser Air Dryer
Includes Powerex OTS110254 Air Compressor and Kaeser HTRD20 Refrigerated Air Dryer






656
Assorted Lab Supplies and Electronics
Includes: Glove box, clamps, transformers, Razel testers


658
Michelin Portable Foot Pump (Qty 4) and
ChemglassBeam Torque Wrench (Qty 5)

700
Bulk Lot Of Medical Consumables
This is a BULK lot of medical consumables including (but not limited to) pipette tips, vials, test tubes, syringes, filters, silicon tubes. Manufactures include (but not limited to) Millipore, Cytiva, VWR, Henke Sass Wolf, Corning, BD Needle, Replige...

701
Bulk Lot Of Medical Consumables
This is a BULK lot of medical consumables including (but not limited to) pipette tips, vials, test tubes, syringes, filters, barrier tips, cell/tissue culture plates/flasks, combitips, solutions/infusion sets, vial shields. Manufactures include (but...

702
Bulk Lot Of Medical Consumables
This is a BULK lot of medical consumables including (but not limited to) garments, lab coats, boot covers, tube racks, centrifuge tubes, polysulfone pressure transducers, glass pipets, cap assemblies, roller bottles, pipet tips, BPT tubing, vacuum fi...

703
Wire Racks and Metal Shelving (Qty 15)
THIS LOT INLCUDES ONLY THE SHELVING/RACKING UNITS. THIS LOT WILL BE PICKED UP LAST AFTER ALL CONTENTS LOCATED ON THE RACKS/SHELVES HAVE BEEN PICKED UP.

704
Wire Racks (Qty 10)
THIS LOT INLCUDES ONLY THE RACKS. THIS LOT WILL BE PICKED UP LAST AFTER ALL CONTENTS LOCATED ON THE RACKS HAVE BEEN PICKED UP.

705
Wire Racks (Qt 12)
THIS LOT INLCUDES ONLY THE RACKS. THIS LOT WILL BE PICKED UP LAST AFTER ALL CONTENTS LOCATED ON THE RACKS HAVE BEEN PICKED UP.

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Bankruptcy Auction: Biotechnology Research Lab Equipment
 Live Auction
Auction Date(s)
Sunday Nov 3, 2024 Completed
Thursday Nov 7, 2024 Completed
Auction Location

Monmouth Jct, NJ 08852
Company
AuctionAdvisors

Contact: Oren Klein
Phone: 973-753-1313
Website: www.auctionadvisors.com

Listing Terms and Conditions
Auction Terms & Conditions of Bidder Participation Thank you for your interest in this Online Auction. These are the Terms and Conditions on which all property is offered for sale, subject to amendments and modifications announced by the Auctioneer at the time of the auction and posted on the website. By bidding in this auction, prospective bidders agree to be bound by and comply with the following Terms & Conditions and acknowledge and agree that they are being allowed to participate at this auction in reliance on such agreement. 1. REGISTRATION. Bidders must be registered with: www.bidspotter.com and approved for bidding by auctioneer. By registering you represent and warrant that any and all Buyer information is correct. Auctioneer reserves the right to deny any registered bidder at any time at its sole discretion without notification. 2. INSPECTIONS: Bidders may inspect the Lots/offering at 1 Deerpark Dr, Monmouth Junction, NJ 08852 on Friday, November 1st & Saturday, November 2nd from 12PM to 2PM. Please contact Joe by email (jcamilleri@auctionadvisors.com) or call/text (908) 329-7877 to set up an inspection time. 3. AS-IS WHERE-IS SALE. ALL SALES ARE FINAL, ON AN "AS IS, WHERE IS", "IN PLACE", "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, ORAL ANNOUNCEMENT OR OTHERWISE. 4. DESCRIPTIONS NOT TO BE RELIED UPON. THE AUCTION CATALOGUE IS MERELY A GUIDE. DESCRIPTIONS AND QUANTITIES HAVE BEEN PREPARED IN GOOD FAITH FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY, GENUINENESS, AUTHENTICITY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. IN ADDITION, AUCTIONEER RESERVES THE RIGHT TO ADD, ALTER, OR REMOVE ANY ITEM(S) TO OR FROM THE AUCTION AT ANY TIME. 5. PAYMENT IN FULL. Invoices for payment of full amount owed will be issued promptly after the auction. All invoiced amounts must be paid in full immediately but in no event later than the second business day after the auction. TIME IS OF-THE -ESSENCE with respect to such date. NOTHING SHALL BE REMOVED FROM THE PREMISES UNLESS AND UNTIL A BIDDER HAS PAID ALL OF ITS INVOICES IN FULL. BUYERS ARE ENCOURAGED TO PAY INVOICES ONLINE PRIOR TO PICK UP. 6. FORM OF PAYMENT. No personal or business checks will be accepted unless pre-approved by Auctioneer. Only cash, cashier's checks, wire transfer, pre-approved business checks and credit cards (only up to $2,000 - see additional fees below) will be accepted. 7. CREDIT CARD FEE. Payments by way of Credit Card will ONLY be accepted for purchases which do not exceed $2,000, subject to Auctioneer's discretion. An administration fee of 4% shall apply to credit card purchases. 8. REMOVAL TIMES TO BE SET BY AUCTIONEER. Removal of lots shall take place starting Monday, November 11th and continue through Wednesday, November 13th. Removal times on these days shall be from 10:00 AM to 4:00 PM EST. You MUST schedule your appointment with Joe prior to arrival. 9. REMOVAL MUST BE DONE IN A COMMERCIALLY REASONABLE MANNER. All successful bidders and/or their agents must sign a Waiver & Release prior to any dismantling or removal which must be done in a commercially reasonable fashion. It is preferred that all Buyers use a professional rigging company with proof of insurance. 10. REMOVAL AT BIDDERS RISK, COST AND EXPENSE. All items must be removed by the successful bidder at their own risk, cost and expense. Any damage caused in connection with the dismantling, packing and/or removing any item shall be the responsibility of such bidder, whether such damage is to the item itself, to any other item, or to the premises or any third party, or third party property. There is limited material handling equipment, tools or labor available at the auction site - all successful bidders must supply their own and/or may use the limited resources available for a service fee. After the time frame set forth on Auctioneer schedule of move-out dates, the Auctioneer will no longer be responsible. Please be forewarned that in the case of a default, the auction company reserves the right to resell any and all unclaimed items and the defaulting bidder will not only forfeit his deposit but bear the responsibility of any shortfall in case of resale, and also all costs and expenses associated with the default as well as all auctioneer's fees and commissions. *PLEASE NOTE: BUYER SOLELY RESPONSIBLE FOR PACKING & PICKUP. Please Note: The Auctioneer does not pack, ship, store, crate or rig items. Buyers may either pick up their items at the designated auction site personally or can arrange for a third-party logistics firm to manage the removal process for them. If someone other than the registered buyer at the sale is designated to pick up those purchased assets, the buyer must contract with an independent logistics firm or other representative who will dismantle, crate, pack, load and/or ship your purchased items; coordinate the removal of those purchased items to meet the time deadlines indicated of this auction and authorize the auction company to release items to a third-party contractor for shipping, crating or packing purposes. Since the Auctioneer does not ship the items, we do not obtain/prepare any export licenses/documents. Further, the auction company is not affiliated with any machinery rigging, transport or export company. We provide the names and contact information of available companies solely as a courtesy to our buyers. The auction company does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage, omission or other problems incurred as a result of the actions of those companies. 11. ALL BIDS ARE FINAL. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke their bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received and buyer has taken possession and removed any purchased lots from the premises. 12. BUYER'S PREMIUM. An fifteen percent (15%) buyer's premium is in effect for all successful bidders at this auction. 13. AUCTIONEER FINAL ARBITER. The Auctioneer is the final judge in case of a dispute. The final posting on auction day made by the auctioneer will take precedence over any previously printed materials. Auctioneer has the right at its sole and absolute discretion (should Auctioneer so choose to exercise it) to reject any and all bids Auctioneer deems unreasonable, entertain a bulk bid, a mini bulk bid or any package of lots. Further, Auctioneer may at its sole discretion set and/or alter bidding increments at any time. 14. BIDDER PARTICIPATION AT DISCRETION OF AUCTIONEER. All bidders must be at least 21 years of age. The auctioneer reserves the right to deny admission to the auction to any person the auctioneer deems to be abusive, disorderly, intoxicated or non-compliant with the terms and conditions for the auction, or a potential threat to be such or any individual who the Auctioneer, at its sole discretion, deems to be potentially disruptive to the auction or who the Auctioneer believes, at its discretion, cannot reasonably be relied upon to comply with these Terms & Conditions. The auctioneer also reserves the right to deny registration to any online bidder who does not qualify to bid. All sales subject to the approval of the Bankruptcy Trustee and the Bankruptcy Court.
This auction will take place on Bidspotter.com! You can find the full catalog and register to bid here: https://www.bidspotter.com/en-us/auction-catalogues/bscauction/catalogue-id-auctio15-10011 AuctionAdvisors has been retained to liquidate high-value, top-of-the-line laboratory equipment, including sophisticated analytical instruments for chromatography and mass spectrometry, large-scale chemical reactors, advanced bioprocessing centrifuges, state-of-the-art autoclave and much more. This premium selection of equipment represents a significant investment in advanced technology, ideally suited for a research institution or advanced laboratory seeking to enhance capabilities and efficiency. This opportunity offers significant cost savings on premium equipment. Don�t miss out on this chance to acquire high-quality, well-maintained laboratory assets!

10
Switches, Routers, PBX Phone System and More
Dell LCD monitor, HPE Office Connect 1820 Series Switch J9980A, Sophos XGS 126 security appliance Cradlepoint AER1650LP4 4 port Ethernet router, Netgear ProSAFE JGS524PE switch, 2 APC Back-UPS. 8 Panasonic KX-DT343 IP telephones, Panasonic KX-TDA200 ...

11
Conference Room Furniture, Fire Cabinet
Conference table, round table, credenza, whiteboard, 5 metal swivel arm chairs, arm chair, Phoenix 2 door fire resistant cabinet w/key, Dell 1510X DLP Projector (mounted)

12
Conference Room Furniture, 75" TV, Dry Erase Board
16' Conference table w/matching 72" credenza, 16- metal upholstered swivel arm chairs, coat tree, Samsung model UN75RU8000FXZA 75" LED 4K Smart Tizen TV, Global glass dry erase board, 48" x 96"

13
Office and All Contents
Includes Desks, Chairs, Whiteboards

14

15
Office and All Contents
Includes 42" diameter Formica table

16

17

18
Breakroom / Kitchen and All Contents
Includes Whirlpool French door refrigerator/freezer, Nespresso espresso machine, Sharp 1000w microwave oven

150
FreeZone 2.5 Liter -50C Benchtop Freeze Dryer
FreeZone Benchtop Freeze Dryer APPEARS to be new or professionally refurbished. Wrapped and in a box. Also includes (3) Edwards Rotary Vane Vacuums.

151

152

153

154

155

156

200
KrosFlo KMPi TTF System
Includes peristaltic pump, backpressure valve, and platform scales. 900-2460

201
KrosFlo KR2i TTF System
Includes peristaltic pump, KRJr Pump and scales. 900-2039

202
Chemglass 50L Chemical Lab Jacketed Glass Reactor
Includes Chemglass CG-2033-B-25 overhead motor, Chemglass CG-2077-M stir bearings, Chemglass CG-2033-V digital controller, Huber CC-508 with Pilot ONE refrigerated heating circulator, plus all adapters and accessories. Manufacturer Date: 09-29-2020

203
Chemglass 50L Chemical Lab Jacketed Glass Reactor
Includes Chemglass CG-2033-B-25 overhead motor, Chemglass CG-2077-M stir bearings, Chemglass CG-2033-V digital controller, Huber CC-508 with Pilot ONE refrigerated heating circulator, plus all adapters and accessories. Manufacturer Date: 09-29-2020

204

205

206

207

208

209

210
Repligen SUIS-PD TSLDI-2BMC 2 Bolt Manual Clamp
Repligen SUIS-PD TSLDI-2BMC 2 Bolt Manual Clamp C/N: TSLDI-2BMC B/N: 20015283 SIUS-PD Filter Plate Insert with Mini T/C C/N: TFPLS-SA08 B/N: 20071890

211
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20013489 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20031345

212
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20013489 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20031345

213
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20007495 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20031345

214
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp
Repligen SIUS TSPDI-4BMC 4-Bolt Manual Clamp C/N: TSPDI-4BMC B/N: 20028589 SIUS-75 Filter Plate Insert with 1" T/C (49 LPM) C/N: TFP75-SE16 B/N: 20053175

250

251

252

253

254

301

302
Chemlass 500mL Glass Reactor Vessels (Qty 3)
Includes overhead mixer, vacuum pump, circulators, peristaltic pump, plus all adapters and accessories photographed.

303
Chemlass 100L Chemical Lab Jacketed Glass Reactor
Manufacturer Date: 2-23-2022 Includes overhead motor, stir bearings, digital controller, dynamic temperature control, plus all adapters and accessories.

304
Chemlass 100L Chemical Lab Jacketed Glass Reactor
Manufacturer Date: 2-23-2022 Includes overhead motor, stir bearings, digital controller, dynamic temperature control, plus all adapters and accessories.

305

306
Sartorius Analytical Balance
Model: SECURA224-1NUS Manufacturer Date: 06-21-2021

351

353
VWR Shaking Water Bath
Model: 10128-126

354

355
Particle Counter and Invitrogen Power Supply
Lot includes: (1) Particle Measuring System APSS-2000 & (1) Invitrogen PowerEase Touch PS0120 Power Supply

356

357

358

359

360

361
Digital Microtiter, Rotator, Fluid Aspirators
Lot includes: (1) IKA Digital Microtiter, (1) Benchmark Roto-Bot R4040 Programmable Rotator & (2) Vacuubrand BVC Control Fluid Aspiration Systems

362
Labconco Biosafety Cabinet
Model: 302419101 Length: 4'

363
Labconco Biosafety Cabinet
Model: 302419101 Length: 3'

401

402
Mettler Toledo SevenDirect SD20 Ph Meter Kit
Include Mettler Toledo label printer

403
MBraun LABstar Pro InertGas Glove Box Workstation
Includes MBraun Foot Swtich and Edwards Dry Scroll Pump

404

405

406
Bio-Rad BioLogic / BioFrac Systems (Qty 4)
Lot includes: (3) Bio-Rad BioLogic LP Chromatography Systems with Bio-Rad BioFrac Fraction Collectors and (1) Standalone Bio-Rad BioFrac Fraction Collector

407

408

409

410
Digital Shaking Drybath and Centrifuge
Lot Includes: (3) Thermo Fisher Digital Shaking Drybath (Model: 88880027) and (1) Eppendorf 5425 Centrifuge.

451

452

453

454
Agilent Technologies Cary 5000 Spectrophotometer
Includes table and computer workstation.

455
Wyatt DynaPro Dynamic Light Scattering System
Model: WPR3-01 Includes computer workstation

456
Molecular Devices SpectraMax iD3
Includes Surface Notebook Computer

457
Alliance Waters E2695 HPLC Separation Module
Includes 2998 PDA Detector, 2424 ELS Detector, VWR Nitrogen Generation System and computer workstation.

458
Water Acquity H-Class Plus BioSample Manager
Includes Water Acquity H-Class plus BioQuaternary Solvent Manager, Water Acquity CH-A, Water Acquity QDa Detector, Water Acquity PDAe Detector, Vacuum Pump and computer workstation.

500

551

552
JustRite Flammable Liquid Storage Cabinet 90gal
Broken latch, door off, hole in back

553

554
Thermal Scientific Heraeus Multitude X1R
Refrigerated benchtop centrifuge

555

556

557

601

602

603

604

605

606

649

650
Powerex Air Compressor and Kaeser Air Dryer
Includes Powerex OTS110254 Air Compressor and Kaeser HTRD20 Refrigerated Air Dryer

651

652

653

654

655

656
Assorted Lab Supplies and Electronics
Includes: Glove box, clamps, transformers, Razel testers

657

658
Michelin Portable Foot Pump (Qty 4) and
ChemglassBeam Torque Wrench (Qty 5)

700
Bulk Lot Of Medical Consumables
This is a BULK lot of medical consumables including (but not limited to) pipette tips, vials, test tubes, syringes, filters, silicon tubes. Manufactures include (but not limited to) Millipore, Cytiva, VWR, Henke Sass Wolf, Corning, BD Needle, Replige...

701
Bulk Lot Of Medical Consumables
This is a BULK lot of medical consumables including (but not limited to) pipette tips, vials, test tubes, syringes, filters, barrier tips, cell/tissue culture plates/flasks, combitips, solutions/infusion sets, vial shields. Manufactures include (but...

702
Bulk Lot Of Medical Consumables
This is a BULK lot of medical consumables including (but not limited to) garments, lab coats, boot covers, tube racks, centrifuge tubes, polysulfone pressure transducers, glass pipets, cap assemblies, roller bottles, pipet tips, BPT tubing, vacuum fi...

703
Wire Racks and Metal Shelving (Qty 15)
THIS LOT INLCUDES ONLY THE SHELVING/RACKING UNITS. THIS LOT WILL BE PICKED UP LAST AFTER ALL CONTENTS LOCATED ON THE RACKS/SHELVES HAVE BEEN PICKED UP.

704
Wire Racks (Qty 10)
THIS LOT INLCUDES ONLY THE RACKS. THIS LOT WILL BE PICKED UP LAST AFTER ALL CONTENTS LOCATED ON THE RACKS HAVE BEEN PICKED UP.

705
Wire Racks (Qt 12)
THIS LOT INLCUDES ONLY THE RACKS. THIS LOT WILL BE PICKED UP LAST AFTER ALL CONTENTS LOCATED ON THE RACKS HAVE BEEN PICKED UP.