Fairfield Machine Company
Previous Page Listing ID#: 1655954

Auction Location

Columbiana, OH 44408
Auction Dates and TimesSALE IS COMPLETED
Wednesday Sep 4, 2024 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Email: info@hartlandmachinery.com
Website: www.hartlandauctions.com

GoToAuction.com ID#: 6269
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up. 2.Purchases shall be paid for with cash, WV, PA or Ohio co. checks, credit card or wire transfer. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer�s Premium of 12% applies to all lots sold in house, 15% online. 3% surcharge for credit cards. 6.$10 minimum bid. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.Removal dates and times: After the auction Wednesday until 5 pm. Thursday and Friday from 8 am to 4 pm. All other days by appointment only through through September 30. Items not picked up by end of day September 30 will be considered forfeit, unless other arrangements have been made with the new building owners. Call or see auctioneer for details. 12.NSF or stop payment checks are subject to a $35.00 returned check fee. 13. Forklift to be held through Friday September 20 at noon to assist with loading.
Listing Information
Fabricating & welding equipment, plasma cutting table, tons of fasteners, hydraulic hose and fittings, hose crimpers, saws, welders, weld positioner, layout tables,




































37
TWO WIRE MESH SLINGS
2.25 TON CHOKE 4.5 TON BASKET 1.8 TON CHOKE 3.6 TON BASKET














































84
MILLER DELTAWELD 650 ON CART W/ WIRE FEED
SN JE741471, WITH CABLES, LEADS, EVERYTHING ON CART, DISCONNECT AT BUSS BAR BOX








94
RIDGID 535 PIPE THREADER
SN EAM16695G98, WITH ASSORTED PARTS

96
EDWARDS JAWS IV 100 TON HYDRAULIC IRONWORKER
PUNCHES 1-1/16" HOLE IN 1" PLATE, ANGLES 6"x "x1/2" FLATS 1"x 10", ROUNDS 1-1/4" NOTCHING 2-1/4"x 6"x1/2" SN 141510004 3 PH, 440V, 60 HZ






















116
MARKLIFT CH20NEP ELECTRIC SCISSOR LIFT
800 LB WORK LOAD, 20 FT LIFT, SN 25692

117
GORBEL 165 LB EASY ARM ARTICULATING JIB CRANE
UP TO 10' SPAN, UP TO 180 FT/MIN SPEED, FREE STANDING UNIT

















134
MISC WELDING PARTS & ACCESSORIES
NOZZLES, HOSE, ROLL KITS, ETC




138
SMALL SHELF & MISC CONTENTS
EAR PLUGS, PENCIL SHARPENER, LABEL MAKER



141

142

143

144




148
WAGNER POWER PAINTER & PAINT SUPPLIES
STRAINERS, MIXING CUPS, SPRAYERS TRAYS









157
SKID OF MISC PARTS
CYLINDER, MOTORS

158
ARONSON HD60CS WELD POSITIONER
SN 79495, 6000 LB, MAX LOAD TORQUE 72000 LB. IN. ROT., 123000 LB. IN. TILT, 8.5 INHERENT OVERHANG, WITH 3 JAW CHUCK





Auction License: AU-002918-L
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Nov 9
Youngstown, OH



Sponsored Links

Fairfield Machine Company

Hartland Auctioneers

Hartland Auctioneers


Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Sale Location
1143 Lower Elkton Rd
Columbiana, OH 44408
Sale Dates and Times
Wednesday Sep 4, 2024 Completed
Sale Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up. 2.Purchases shall be paid for with cash, WV, PA or Ohio co. checks, credit card or wire transfer. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer�s Premium of 12% applies to all lots sold in house, 15% online. 3% surcharge for credit cards. 6.$10 minimum bid. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.Removal dates and times: After the auction Wednesday until 5 pm. Thursday and Friday from 8 am to 4 pm. All other days by appointment only through through September 30. Items not picked up by end of day September 30 will be considered forfeit, unless other arrangements have been made with the new building owners. Call or see auctioneer for details. 12.NSF or stop payment checks are subject to a $35.00 returned check fee. 13. Forklift to be held through Friday September 20 at noon to assist with loading.
Listing Details
Fabricating & welding equipment, plasma cutting table, tons of fasteners, hydraulic hose and fittings, hose crimpers, saws, welders, weld positioner, layout tables,




































37
TWO WIRE MESH SLINGS
2.25 TON CHOKE 4.5 TON BASKET 1.8 TON CHOKE 3.6 TON BASKET














































84
MILLER DELTAWELD 650 ON CART W/ WIRE FEED
SN JE741471, WITH CABLES, LEADS, EVERYTHING ON CART, DISCONNECT AT BUSS BAR BOX








94
RIDGID 535 PIPE THREADER
SN EAM16695G98, WITH ASSORTED PARTS

96
EDWARDS JAWS IV 100 TON HYDRAULIC IRONWORKER
PUNCHES 1-1/16" HOLE IN 1" PLATE, ANGLES 6"x "x1/2" FLATS 1"x 10", ROUNDS 1-1/4" NOTCHING 2-1/4"x 6"x1/2" SN 141510004 3 PH, 440V, 60 HZ






















116
MARKLIFT CH20NEP ELECTRIC SCISSOR LIFT
800 LB WORK LOAD, 20 FT LIFT, SN 25692

117
GORBEL 165 LB EASY ARM ARTICULATING JIB CRANE
UP TO 10' SPAN, UP TO 180 FT/MIN SPEED, FREE STANDING UNIT

















134
MISC WELDING PARTS & ACCESSORIES
NOZZLES, HOSE, ROLL KITS, ETC




138
SMALL SHELF & MISC CONTENTS
EAR PLUGS, PENCIL SHARPENER, LABEL MAKER



141

142

143

144




148
WAGNER POWER PAINTER & PAINT SUPPLIES
STRAINERS, MIXING CUPS, SPRAYERS TRAYS









157
SKID OF MISC PARTS
CYLINDER, MOTORS

158
ARONSON HD60CS WELD POSITIONER
SN 79495, 6000 LB, MAX LOAD TORQUE 72000 LB. IN. ROT., 123000 LB. IN. TILT, 8.5 INHERENT OVERHANG, WITH 3 JAW CHUCK




Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Fairfield Machine Company
 Live Auction w/Online Bidding
Auction Date(s)
Wednesday Sep 4, 2024 Completed
Auction Location

Columbiana, OH 44408
Company
Hartland Auctioneers

Contact: Dean A. Gearhart GPPA
Phone: (724) 368-9788
Website: www.hartlandauctions.com

Listing Terms and Conditions
No Merchandise may be removed until complete settlement has been made. 1.All purchases shall be paid for in full on the day you pick up, unless a wire transfer is required. The wire transfer must be processed and accepted before you can pick up. 2.Purchases shall be paid for with cash, WV, PA or Ohio co. checks, credit card or wire transfer. Any other state checks will require bank letter of credit. Invoices up to $10,000.00 may be paid for with a company check. Invoices above $10,000.00 shall be paid for with a wire or ACH transfer. 3.All items are sold as is where is and how is, with no warranties of any type expressed or implied concerning the merchandise being sold. Once an item is called Sold, it becomes the sole responsibility of the buyer, and all risk of loss or damage passes to them. 4.Descriptions of merchandise contained in the catalog are intended for general information purposes only. Please examine items carefully before bidding as no refunds will be given. 5.A Buyer�s Premium of 12% applies to all lots sold in house, 15% online. 3% surcharge for credit cards. 6.$10 minimum bid. 7.No one under the age of 18 years of age is permitted to register or bid. 8.A properly stamped invoice, authenticated by our cashier, will be required by our check-out personnel in order that you may remove the items. Any discrepancies must be brought to our attention prior to removal from the property. 9.The auctioneers may remove items from the sale at their discretion. The auctioneer reserves the right to accept or reject any bid. 10.The auctioneer is the sole authority on any disputed bid, and his word is final. We reserve the right to correct any clerical errors and to re-invoice if necessary. If a dispute arises out of this contract that cannot be settled through negotiation or mediation, any-and-all court proceeding shall take place in Butler, Pa.16101. 11.Removal dates and times: After the auction Wednesday until 5 pm. Thursday and Friday from 8 am to 4 pm. All other days by appointment only through through September 30. Items not picked up by end of day September 30 will be considered forfeit, unless other arrangements have been made with the new building owners. Call or see auctioneer for details. 12.NSF or stop payment checks are subject to a $35.00 returned check fee. 13. Forklift to be held through Friday September 20 at noon to assist with loading.
Fabricating & welding equipment, plasma cutting table, tons of fasteners, hydraulic hose and fittings, hose crimpers, saws, welders, weld positioner, layout tables,

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37
TWO WIRE MESH SLINGS
2.25 TON CHOKE 4.5 TON BASKET 1.8 TON CHOKE 3.6 TON BASKET

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

64

65

66

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

81

82

82

83

83

84
MILLER DELTAWELD 650 ON CART W/ WIRE FEED
SN JE741471, WITH CABLES, LEADS, EVERYTHING ON CART, DISCONNECT AT BUSS BAR BOX

85

86

88

89

90

92

93

94
RIDGID 535 PIPE THREADER
SN EAM16695G98, WITH ASSORTED PARTS

96
EDWARDS JAWS IV 100 TON HYDRAULIC IRONWORKER
PUNCHES 1-1/16" HOLE IN 1" PLATE, ANGLES 6"x "x1/2" FLATS 1"x 10", ROUNDS 1-1/4" NOTCHING 2-1/4"x 6"x1/2" SN 141510004 3 PH, 440V, 60 HZ

97

97

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116
MARKLIFT CH20NEP ELECTRIC SCISSOR LIFT
800 LB WORK LOAD, 20 FT LIFT, SN 25692

117
GORBEL 165 LB EASY ARM ARTICULATING JIB CRANE
UP TO 10' SPAN, UP TO 180 FT/MIN SPEED, FREE STANDING UNIT

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134
MISC WELDING PARTS & ACCESSORIES
NOZZLES, HOSE, ROLL KITS, ETC

135

136

137

138
SMALL SHELF & MISC CONTENTS
EAR PLUGS, PENCIL SHARPENER, LABEL MAKER

139

140

141

142

143

144

145

146

147

148
WAGNER POWER PAINTER & PAINT SUPPLIES
STRAINERS, MIXING CUPS, SPRAYERS TRAYS

149

150

151

152

153

154

155

156

157
SKID OF MISC PARTS
CYLINDER, MOTORS

158
ARONSON HD60CS WELD POSITIONER
SN 79495, 6000 LB, MAX LOAD TORQUE 72000 LB. IN. ROT., 123000 LB. IN. TILT, 8.5 INHERENT OVERHANG, WITH 3 JAW CHUCK

159

160

166