00

Information Lot
Join us for the absolute liquidation auction of Kropf Logging & Lumber on September 20, 2024, starting at 9 AM Central Time. This auction, located at 931 SE 451 Rd, Deepwater, MO 64740, features a wide range of sawmill and forestry equipment as well as consignments. Preview dates and times are available by contacting Eugene Hochstetler. Don’t miss this opportunity to acquire quality equipment! This is an absolute auction with no minimums and no reserves—the highest bidder will be the new owner! Terms include a 10% onsite and 13%-15% online buyer’s premium for all purchases.

Auction Specialist: Eugene Hochstetler 574-242-1100
Auction Manager: Mose Troyer 330-763-3780

Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with.

 

01

Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Week of auction from 8am to 4pm, otherwise by appointment. Call Eugene 574-242-1100

Location: 931 SE 451 Rd, Deepwater, MO 64740

02

Loadout Information
Removal Deadline: 30 Days
Loadout of Uninstalled Equipment and Smalls: Free loadout day of the auction and on Monday Sept 23rd 8 AM until 4 PM. After Sept. 24th you will need to schedule an appointment with Jonathon 417-328-4922 .
Installed Equipment: Buyers is responsible to remove and load all installed equipment or hire a rigger to do it.


To help avoid confusion, please make sure the Trucking Broker and/or the Truck Driver has a copy of your invoice when he arrives pick up your items

 

03

Rigging Information
RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. 

Recommended Rigger: TBD
 

04

Payment Information
Payment terms: 10% Onsite and 15% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 
 

97

CAT 555D Wheel Skidder 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

98

Heavy Equipment Key Set 36 Keys
Shipping available for $20

99

SDRTOP Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

MDI Probe 2100 Metal Detector
Portable industrial metal detector, charger

101

Banding Cart and Fromm Tool
Model: A335, Fromm tightener and crimper tool, banding cart up to 6" rolls

102

Banding Tools
2 tighteners for steel banding, 2 crimpers, bucket with clips

103

3/4" Steel Banding
7 rolls of new banding

230

Precision Husky P636H Rosserhead Debarker
SN: D-617.
Drive on head: Electric, 25 hp.
Head type: Steel.
Width of head: 12".
Carriage Drive: Yes, chain.
Includes barn sweep: No.
Cable: Yes.
Cab: Yes, size: 52" x 52" x 81".
Controls: Yes, manual hydraulic.

Features and Notes: Heat and AC units, metal detector control box not included, 4" x 24" bullwheels, 13' 6" outside to outside, slant track, includes support structure with steps and catwalk, slide pan.

231

3 Strand Log Deck with Stop'n'Load
10' x 21", support to ground, electric drive, hydraulic stop'n'load

232

Belt Conveyor
31" x 64', 23 1/2" belt, steel support posts, electric drive

233

Belt Conveyor
13' x 14'6", 12' wide belt, electric drive

234

MDI Log Metal Detector
70" x 66", 46" x 38" inside, 8' fiberglass trough, 27" pan, control box in cab, top has some heat damage, no drive, support frame, control model CR-58, SN: 122290, 24" x 12' 6" belt

235

Hourglass Rollcase with Log Kickers
46" x 16', 16" x 29 1/2" rolls, hydraulic on kickers, electric drive

236

Hourglass Rollcase
46 1/2" x 10' 3", 16" x 29 1/2" rolls, support posts on 1 end, electric drive

237

Cleereman 36 RH Carriage
(1st of an entirety)
SN: 36-918-R20.
# of headblocks: 3.
Automated: Yes.
Setworks: Yes.
Setworks Make: 110/hydraulic; proportional computer controls.
Scanner: No.
Log/Cant turners: Yes, Make: bottom dog kickers.
Linear positioning: Yes.
Overall carriage length: 15' 6" x 6' 4".
Center to center of track wheels: 50".
Auto lube system: Yes.
Number of axles: 3.
Wheel size: 12".

Features and Notes: Pantagraph arm with post included, control wires on pantagraph have heat damage, 5/8" dogs, valve heat blocks, rebuilt by Cleereman in 2020.
 

238

Carriage Track and Frame
(Part of an entirety) 50" center to center x 50' track, frame is 58', support frame to ground

239

Cleereman Carriage Drive
(Part of an entirety) Hydraulic motor, drum with 5/8" cable, Idler wheel, 150'-1 1/4" black pipe, 75'-1/2" pipe

240

Cleereman Operator's Cab
(Part of an entirety) 54 1/2" x 6' x 81", heat and AC units, electrical switch box, no controls

240A

Cleereman Entirety of Lots 237 - 240
With 10% raise.

241

Mellott Chain Type Log Turner
58" bar, 44" chain, hydraulic drive, control valve under cab

242

4 Strand Log Deck with Stop'n'Load
10' x 25', 11' 6" trucking width at shaft, hydraulic drive and load, 4' nose skids, support to ground

243

McDonough 62" Headrig
SN: 62M-225-116L.
Size of wheels: 62" diameter x 9 1/4" wide.
Meat on wheels: 1 1/4".
Strain (tightening pressure): Air.
Max throat opening: 30".
Vertical: Yes.

Features and Notes: Set up for double cut, electric motor on band tightener, 32" x 6' off-bear belt, 19" belt.

243A

Simonds Bandsaw Blades
4 pieces of new blades, double cut, 32-OX12X065DKROPFHALFW,

244

Worldwide Electric Motor
150 hp, 1790 RPM, 445 T-frame, 8 groove pulley, mounting frame

245

Off-bear Belt
30" x 6', 19 1/2" belt, electric drive

246

Slab Dump
40" x 10', air cylinder lift, electric drive, 31" wide dump, 24' belt

247

Phelps Dust Blower and Pipe
Model 45, 20" inlet, 12" outlet, 12" x 80' PVC pipe, 10" x 100' steel pipe, guesstimated to be a 48'' blower. Blower and steel pipe has fire damage.

248

American Machinery Gang Saw Edger Combo
Stationary: Yes.
Cut capacity: 5 1/2" thick x 60" wide.
Overall dimensions of infeed: 5' x 7'.
Overall dimensions of outfeed: 6' 4" x 12'.
# of blades: Variable, slide on blade sleeve for gang blocking sawing.
# of moveable blades: 4.
Blade type: welded tip.
Arbor size: 3 7/16"; blades 4 1/2".
Power type: Electric.
Lasers: Yes, how many lasers? 5 with heat damage.

Features and Notes: 20" wide capacity on edger side with 2 moving blades, gang saw side 32" capacity, control box switches have heat damage, 50 hp electric on arbor, 6" x 12' tailing belt on edger side, 12" x 12' belt on gang side plus 18" x 10' rolls, support posts to ground. 

249

American Machinery Control Center
2 door, 4' x 6' x 13", motor starters and relays

249A

Stairs and Catwalk
Catwalk around edger and resaw

250

Live Rollcase with Pop-Up Transfer
31" x 26', 6 1/2" x 24" rolls, 3 strand transfer 6' x 70" with board stop, may have heat damage, electric drive

251

Live Rollcase with Pop-Up Transfer and Board Dump
31" x 21', 4 strand pop-up transfer-10' 6" x 46", 11' 5" board dump, support lets to ground, may have heat damage, electric drive

252

4 Strand Transfer and Drop-down Deck
9' 4" x 9' 8" landing deck, 4' slant deck with rooftop chain, 9' 6" x 10' drop-down deck, electric drive

253

3 Strand Green Chain
6' 4" x 53' 8", C550 rooftop chain, steel slant decking, electric drive

254

Brewco Super Band Resaw
Model: BSBH, SN: B115166, 6" x 21' feed through belt with hydraulic drive, electric hydraulic pack, 1 1/4" bands, air tensioner, 3/4" x 28 1/2" wheels, some extra bands

255

Belt Conveyor
30" x 22', 24" belt, electric drive

256

Mellott Belt Conveyor
31" x 26', takes 24" belt, no belt included, electric drive

257

Pendu Dual Arbor Gangsaw
Model: 5000, SN: 82002R, 75 HP electric arbors, 5 1/2" x 12" capacity, 2 3/8" arbors, 10" blades, assorted spacers

257A

Blades for Pendu Gang Saw
100 pieces, 10'' blades, 2 3/8'' arbor

258

Kent Chop Saw
6" x 14' capacity, manual operation, 24" blade, 16" x 10' infeed rolls, 16" x 7' outfeed rolls, electric drive, has heat damage

259

3 Strand Transfer Deck
6' 4" x 15', steel slant decking, electric drive unit is good, top has heat damage

260

Lumber Carts
4 pieces, 42" x 7' and 8', poly wheels

261

Lumber Carts
(3) 46" x 7', (1) 46" x 8'

262

Lumber Carts
(1) 42" x 7' with end board, (1) 39" x 6' with end board, (1) 41" x 55" with divider for short stock

262A

2002 Iveco Power Unit
(1st of an entirety) Model: 8065.05, meter reads: 11,044 hours, 110 hp, diesel, not used hard. In good condition. Contact Myron Nissley with any questions 574-536-2481

262B

Quincy Air Compressor
(Part of an entirety) Model: 390-23, SN: 312567, size: 7 1/2 x 4 x 4, 20 hp, wasn't used very hard. Contact Myron Nissley with any questions 574-536-2481

262C

Hydraulic Unit and Frame
(Part of an entirety) 1 pump, 2 motors, 3' x 20" x 24" tank, hoses, pulleys and tighteners, 53" x 12' I-Beam frame with lineshaft.  Contact Myron Nissley with any questions 574-536-2481

262D

Power Unit Entirety of Lots 262A - 262D
With 10% raise. Contact Myron Nissley with any questions 574-536-2481

263

Precision Husky Chipper
(1st Lot of an entirety) Model: 58-15, SN: C-3651, 6 holes, using 3 blades, 58", includes pipe adapter

263A

Crown Triton Electric Motor
(Part of an entirety) 100 hp, 1780 RPM, 405 T-frame

264

Chip Cyclone and Pipe
(Part of an entirety) 4' cyclone, 12" steel pipe with elbow

265

Fulghum Chip Shaker Screen
(Part of an entirety) 6' x 6', electric drive

266

Phelps Chip Blower
(Part of an entirety) Model: E-36-KW, 20 hp electric motor, chip discharge chute

267

Chipper Entirety of Lots 263 - 266
With 10% raise

268

Webster Vibrating Conveyor
37" x 70', 24" pan, 10" sides, 1 screen section, chipper adapter

269

Side Pans to Conveyor
Various pieces

270

Detroit 92 Diesel Genset
Engine model: 81637416 V16-92, 1262 hp, meter reads: 3372 hours, 5' x 4' x 27" fuel tank, 8' x 20' storage container, genset model: 574RSL4038, SN: WA-502372-1195, 1800 RPM, frame 574, 750 KW. In good condition

271

Electric Cutout Boxes
2 disconnect boxes, each box has 20' wire

272

Steel Table
42" x 10', 18" x 10' skate rolls on side

272A

Steel Frame
17 1/2" x 10'

273

Vibrating Conveyor
24" x 22', 19" pan, 8" sides, drive unit, screen section

274

Phelps Fan
22", no power

275

Phelps Fan
22", no power

276

Chip Chute Divider
10" x 15" outlet, 10" x 15" inlet

277

Precision Shaker Frame
Model: 6 x 6, no motor

278

Upcut Chop Saw
3 1/2" x 12" capacity, no power

279

Rollcase
24" x 16', 6 1/2" x 18" rolls, no power

280

Lumber Carts
3 pieces need repair, 42" x 7'

281

Steel Stock
3" x 3" x 22' square tube, 6 1/2" x 8" x 18' I-Beam, misc. steel pieces

282

Ebac LD3000
Dry kiln dehumidifier unit, will dry 8' x 20', kiln area, 1 phase, 230V

283

Tools and Parts
2 electric drills, 1 grinder, Cleereman and Webster parts

284

Chains and Sprockets
Roller chain, deck chain, poly deck sprockets

285

Steel Pipe Elbows and Blast Gate
10" elbows, 15" blast gate

286

Electrical Parts
Junction boxes, breakers, fuses

287

Tools, Hoses, and Parts
Partial tap and die set, hydraulic hoses, Jack, and parts

288

Tools and Parts
Tractor top link, Porter-Cable router 1/4", 800 watt inverter, partial tap and die set, 6" flat belt

289

Chainsaw Parts
Husqvarna parts

290

Lincoln Electric Welder
225 amp welder, has leads and rod holder, heavy single phase extension cord

291

Edger Blades for Edmiston
2 pieces, 16", 2 1/4" arbor, inserted teeth, F8 style, new blades

292

Armstrong Grinder Head
Vertical slide head, stone dressing attachment, has heat damage

293

John Deere Pressure Washer
Model: PR3000GH, Honda GX200 motor, condition unknown

294

Electric Motors and Gearbox
Good motors and gearbox

295

Grizzly Drilling and Milling Machine
Model: G1005Z, 2 mill vices, bottom cabinet, electric drive

296

Northern Industrial Drill Press
5/8" max drilling diameter, floor model, vice, electric drive

297

Windstorm Box Fan
40" x 40", 110V plug-in, good condition

298

Box Fan
40" x 40", condition unknown

298A

2 Box Fans
40'' x 40'' electric drive

299

Bin with Bolts and Tool Chest
34" x 24" x 12", electric soldier tool, bolts and misc. parts, 26" x 20" x 12" tool chest with parts, 2 small bins

299A

Chainsaw Parts and Leathe Chaps
5' chainsaw bar, log tagger hammer, 20" chainsaw bar-3 pieces, 2 pair leather chaps

299B

Bearings and Edger Parts
Rexroth solenoid valve, bearings, & control cable

299C

Log Seals, Hammer, Control Cables, and Filters
New Paw Taw John computer cable, sealer hammer, 2 boxes of seals, V-belts, Dodge coupler, John Deere Filters

299D

Hickory Lumber
(63) 7" x 8' 7" x 1 3/8"

299E

Walnut Lumber
7 assorted pieces

299F

4/4 Lumber
39" x 6' to 9', random width, 10 layers, hardwood

299G

4/4 Lumber
39" x 10' 6", random width, 9 layers, hardwood

299H

4/4 Lumber
39" x 8', random width, 3 layers, hardwood

299I

Blocking
(27) 2 1/2" x 3 1/4" x 8' 9", hardwood

300

John Deere 444K Highlift Wheel Loader
SN: DW444KHAFE666879.
Meter reads: 9,637 hours.
Engine: John Deere 4045.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 39 1/2" x 24".
Lift capacity: Unknown.
Tire Size: 17.5R25.
Attachments: 8' x 4' x 3' 3 yd bucket.
Heater: Yes.
A/C: Yes, needs recharged.
Quick Attach: Yes.

Features and Notes: JRB quick attach. Runs and operates.

301

Loader Forks
JRB quick attach, 6" x 58"

302

Loader Forks
JRB quick attach, 6" x 40"

304

Forks
5'' x 48'', 20 1/2'' hookup

305

Skid Steer Forks
Quick attach forks, 5" x 42"

310

Bobcat MT 50 Stand On Skid Steer
SN: 520611322.
Meter reads: 1,792 hours.
Engine: Kubota D722E 14.9kw.
Fuel type: Diesel.
ROPS: No.
2 Speed: No.
Highflow: No.
Lift capacity: No.
Attachments: 36" bucket.

Features and Notes: Runs and operates. Contact Myron Nissley with any questions 574-536-2481

320

John Deere 540B Skidder
Engine: 4039.
Meter reads: 1,582 hours.
Rebuilt engine: No.
Transmission: Powershift.
Tire size: 18.4-26.   Tire chains: No.
Blade size: 92".
Grapple: No.
Cable winch: Yes.
ROPS: Open.
Heat: No.        AC: No.

Features and Notes: Runs and operates.

325

2015 Peterbilt 389 Log Truck
VIN #: 1NPXX4TX6FD280432.
Mileage: 319,890.
Engine Type: Cummins ISX15 600.
Fuel Type: Diesel.
Transmission: Eaton 18 speed.
Log loader: Palfinger EPS100 M13A.
Suspension: Air.
Front axle rating: 20,000 lbs.
Rear axle rating: 23,000 lbs.
GVWR: 83,000 lbs.
Heat/AC: Yes.
Full lock in rears: Yes.
Double frame: Yes.

Features and Notes: Palfinger loader was installed new in 2018. Continuous rotation grapple. Runs and operates good. Has title but will be a delay.

325A

1979 Pup Trailer
VIN: DHW7861, Pintle hitch, 101" x 19' bed, 58" posts, 4 set

326

1991 Kenworth T600 Day Cab Truck
VIN #: 1XKADB9X5MJ569130.
Mileage: 382,110.
Engine Type: Caterpillar 3406B.
Fuel Type: Diesel.
Transmission: 10 speed.
GVWR: 50,000 lbs.
Front axle rating: 12,000 lbs.
Rear axle rating: 19,000 lbs.
AC/Heat: Yes.
Wet kit: No.

Features and Notes: Runs and operates. 

328

1999 Southwind 34N Motorhome
VIN: 3FCNF53S3XJA27846, Triton V10 gas engine, meter reads: 42,460 miles, 34' long, 15' awning, 2 slide outs, sleeps 6, Onan Marquis 5500 engine, 2 rooftop AC units, 30 amp plugin. A clean well kept unit. Contact Myron Nissley with any questions 574-536-2481

330

1989 Fruehauf Log Trailer
VIN: 1H5P04423KM076562, 95" x 44', 55" posts, 8 bunks. No title, bill of sale only.

335

2005 Peerless Chip Van Trailer
VIN #: 1PLE045255PG53920. GVWR: 65000 lbs., 45' x 95", open top with tarp.