September 2024 Online-Only Firearms Auction
Previous Page Listing ID#: 1653687

Auction Location

Plantsville, CT 06479
Auction Dates and TimesSALE IS COMPLETED
Friday Sep 20, 2024 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Connecticut Firearms Auction

Website: www.ctfirearmsauction.com

GoToAuction.com ID#: 8254
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Connecticut Firearms Auction Terms of Sale All bidders are required to read the Terms and Conditions of the Sale before bidding with Connecticut Firearms Auction LLC and/ or CT Firearms Auction collectively referred to below as "CTFA". Those who bid are bound by these Terms and Conditions of the Sale, as amended by any oral announcement, published or posted notices, which together form the contract of the sale between the successful bidder "buyer", "CTFA" and seller "consignor" of the lot. ACCEPTANCE OF TERMS: When bidding on any lot offered by CTFA, the bidder indicates acceptance of the following Terms of Sale. Any participation in the auction binds the bidder to agreement of these terms whether or not buyer has read or understood said terms. The terms in writing contained herein are subject to change without notice and bidder agrees that the most recently published Terms of Sale as published or amended on the website at the beginning of the auction shall apply. BIDDER ELIGIBILITY AND REGISTRATION: Buyers warrant that they are at least age 18 and possess a valid photo ID. Buyers are required to provide a verifiable address of residence, phone number, and email in writing at least 48 hours prior to auction date. Long guns will only be sold to persons 18 years of age, or older. Handguns will only be sold to those persons 21 years of age or older. It is the bidder's responsibility to take buyers premium, shipping, and insurance costs into consideration when bidding on items. It is the buyers responsibility to personally inspect auction items, or request condition reports and detailed questions prior to bidding. TITLE: Title to all merchandise shall pass to the highest bidder at the fall of the auctioneer's hammer. The buyer will then assume all risk and full responsibility of the lot purchased once ownership has changed. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. BUYER'S PREMIUM: A buyers premium will be added to all successful bids and is payable by the buyer as part of the total purchase cost. Base buyers premium (phone, live in-person and in-house absentee) of 18% applies to phone and direct absentee bidding. This is the lowest buyers premium offered, and all bids must be submitted at least 24 hours prior to auction time. A 3% discount is offered for cash, check, wire, and money order payments. Buyers premium for bidding through all online platforms (including www.ctfirearmsauction.com) varies from 21% to 25% with a 3% discount for check or cash equivalent. Please refer to your bidding platform for actual buyers premium. Buyers premium is non-negotiable. Split payment methods (cash/credit) lose 3% discount. LIMITED GUARANTEE: CTFA makes every effort to accurately describe all items offered in its sales. The descriptions and condition reports carry a limited guarantee. It is a guarantee to protect the buyer against errors in descriptive fact and major discrepancies that would have a significant effect upon the value of the item. This limited guarantee covers the following: DESCRIPTIVE FACTS: Manufacturer, model, caliber, serial numbers, barrel length, special features, major restoration, modification, counterfeits, reproductions or major fabrications not disclosed in the description. CONDITION DISCREPANCIES: It is the bidder's responsibility (present, online, or absentee bidders) to determine by inspection by themselves (or a hired professional) the exact condition of each item prior to bidding on the item. CTFA makes every effort to follow the commonly accepted and current condition guidelines for modern and antique firearms such as the NRA Modern and Antique grading system, Blue Book percentage of finish rating, and Standard Catalog of Firearms Modern grading. It is important to note that these systems have changed over the years, and present different opinions based on the edition and authors. Condition reports are the opinion of CTFA and represent the observations of the cataloger. BIDDERS RESPONSIBILITIES: It is the bidder's responsibility to initiate contact with CTFA in request for additional information regarding the items. Submit all questions regarding upcoming auction items at least 48 hours prior to the date of auction. CTFA will make every effort to answer all submitted questions in a timely manner. In-Person Bidders must examine all items prior to purchase and again upon receipt. Any discrepancies must be noted prior to leaving the facility. If bidding via absentee or online, then it is the bidders responsibility to examine the lot immediately upon receipt. If a major discrepancy should be discovered, it is the buyers responsibility to contact us immediately. The limited guarantee is null and void 28 days after the auction date (NOT THE DATE OF RECEIPT). If a buyer pays late and receives items late, through action or inaction on their part, the buyer is disqualified from any guarantee. Under no circumstances will CTFA be responsible for lost profits or other financial damages. If it is agreed that an item may be returned, it is the buyer's responsibility to return it in the same state and condition as received. Returned items that are modified, damaged by buyer, or mishandled void all guarantees. LIMITATIONS: The limited guarantee covers major discrepancies in condition reports, such as error in fact, visible repairs or restorations, or major differences in percent of finish or bore(+/- 20%). This limited guarantee is only available to the buyer of record. Please refer to POST SALE RETURN POLICY. Except as stated in the limited guarantee above, CTFA will not be held responsible for typographical errors or errors of omission. This limited guarantee does NOT cover imperfections, patina, slight damages, handling marks, natural imperfections, undisclosed minor blemishes, finish differences, wood-to-metal fit issues, surface cracks or chips in wood, dings and dents, unverifiable age, and other similar differences that are inherent in the firearms or other antiques and collectibles offered for sale. Firearm internal mechanisms and moving parts are not inspected, and guns are not test fired unless otherwise noted. If mechanical or other working parts are inoperable, even if working at the time of sale, CTFA is not liable due to the inherent nature of the age of these used items. CTFA will not be responsible for shipping costs, after auction appraisal fees, testing or any other post auction costs. This limited guarantee DOES NOT APPLY to any ammunition whatsoever. All Ammunition will be sold "as-is" (see below) AS-IS: Auction lots and items offered with the designation "AS-IS", "Poor condition",or "For parts or restoration" are offered without guarantee, all sales are final and sold without refund or buyer recourse. POST SALE RETURN AND REFUND POLICY: If a major description or condition discrepancy is discovered within 28 calendar days of the auction, a buyer may submit a request in writing for a full refund under the following conditions: The request for refund must be received in writing before the end of the 28th day. The auction lot in question must be received by CTFA within 3 days of the request for return and refund. After receipt of the lot in question, CTFA will perform an evaluation, and determine the validity of the request. If a return and refund is granted, CTFA will notify the buyer within 7 calendar days of receipt. CTFA does not offer adjustments or partial refunds. Refunds are only given for the total hammer price, and restocking fees up to the total amount of buyers premium may apply. Accepted refunds are paid only by paper check, and submitted to the buyer 30 days after receipt of items. FIREARMS TRANSFER AND ELIGIBILITY: All firearm transfers will be in strict accordance with all International, Federal, State and local laws. Buyer is responsible for adhering to all country, state and local laws before bidding. If a bidder is unable to import, purchase, own, or receive a firearm for any reason, they should not bid on these items. If a buyer later determines they cannot legally own a firearm or accept delivery, the bid is still a valid contract, and the buyer is still obligated to remit payment in accordance with payment terms. CTFA does not offer returns, refunds or cancellations on the basis of ineligibility or failure to facilitate transfer. BUYER OF RECORD: All firearms must transfer to the registered buyer on record. CTFA will not modify, or re-invoice any firearms for another party. DENIAL OF TRANSFER: If "Denied" by FBI / NICS background check buyers will not be able to take possession of the firearm and the firearm will be consigned to the next available firearm auction. Dealers and Individuals that bid on and win items own the items and are fully responsible for payment within terms regardless of whether the FBI / NICS approves their taking physical possession of the items. CTFA will not cancel the sale due to disapproval for any reason. If a buyer is appealing a "Denied" decision, we will hold the firearm for a grace period of 30 days, with monthly storage fees in effect on the 31st day. IN-PERSON PAYMENT AND PICKUP: Only the person to whom the bidder number is registered may accept transfer of the firearm(s) at the conclusion of the sale - Federal Law disallows anyone else from accepting the transfer. Buyers may not bid on or pay for modern firearms on behalf of another party. Modern Firearms (1898 and later) Can be picked up in person with a valid CT Pistol Permit or applicable Certificate Can be picked up by FFL Licensee or listed responsible person with "Live Copy" of License Eligible Curio & Relic Firearms can be picked by by C&R Holders with "Live Copy" of license. Non Connecticut Residents (without FFL or C&R) may not pick up modern or NFA firearms in person at our CT Facility. Antique Firearms Can be picked up in person with valid photo ID by persons over the age of 18. No background check required, all states of residence eligible. Non-Guns may be picked up by any eligible buyer (or buyers agent) with a valid photo ID. Ammunition: Any buyer receiving ammunition in the State of CT must possess a Valid CT Pistol Permit, Long Gun Certificate, or Ammunition Certificate per state laws. SHIPPING: Shipping and transportation costs are the responsibility of the buyer. Unless otherwise noted, all items shipped in-house, and will be billed on your invoice. Modern firearms are legally required to be shipped to a BATF licensed FFL business within their state of residence for transfer. For states that allow shipment of C&R firearms to the C&R license holder, CTFA reserves the right to ship those C&R firearms to the address listed on C&R license. Modern handguns only ship via UPS 2-Day Air or U.S.P.S. Priority Mail. Modern long guns are shipped via UPS ground. IT IS THE BUYERS RESPONSIBILITY TO CONTACT THEIR RECEIVING FFL AND ARRANGE TRANSFER AND FFL REMITTANCE. The receiving dealer must submit a current copy of their FFL for each auction invoice. FFL's are not kept on file. FFL's should be submitted to sales@ctfirearmsauction.com or through our website here: https://ctfirearmsauction.com/submit-your-ffl/ FEES: Standard Hand Guns ship for $40. Standard long guns ship for $55. Oversize shipping charges will apply to guns over 45" Overall Length. Additional fees apply for shipping addresses outside the Continental United States. DISASSEMBLY: Firearms, auction items, and accessories may be disassembled for shipping. This may include scopes, cases, barrels, and stocks. ADDRESS: CTFA is not responsible for incorrect shipping addresses. Buyers must verify the shipping address listed on their invoice prior to shipment. Standard items packed internally by CTFA will ship approximately one to fourteen business days after payment AND applicable paperwork (FFL) is received. INSURANCE: All firearms in transit are insured at no additional cost up to $2,500 per shipment. Packages valued over $2,500 require insurance at a rate of 1% per invoiced dollar unless the buyer declines in writing 48 hours prior to package shipment. OVERSIZE: Certain auction items exceed standard shipping fees and may require oversized and heavy shipping surcharges. Every effort is made to note these charges prior to catalog publication, but may be included on a buyers invoice post auction without notice. AMMUNITION: Ammunition does not ship with an associated gun. Separate charges apply for ammunition shipments, and may require heavy or oversize charges. INTERNATIONAL: CTFA welcomes international buyers. CTFA can provide, upon request, recommended firearms exporters and international shippers. It shall be the potential buyer's sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property and for paying all shipping costs, customs and duties on the items. By law, CTFA cannot, and will not, declare lesser values for any international purchases and all shipments will include the invoice with purchase totals including the buyer's premium and shipping cost. CTFA does not offer in-house international shipping (or export) any firearms, ammunition, or weapons REGARDLESS OF AGE OR STATUS OF THE LOT. All international shipping must be performed by a licensed exporter or third party shipper. CTFA does offer domestic shipping to the exporter of the buyer's choice. Buyer is responsible for contacting and employing the exporter. Exporter FFL documents must be sent to sales@ctfirearmsauction.com prior to domestic shipment. CTFA strongly recommends making contact with an exporter prior to bidding for pricing, process and timeline information. GOODS MADE FROM OR CONTAINING MATERIALS FROM PROTECTED SPECIES: CTFA does not accept any responsibility or liability for the sale of items containing materials from protected species or for any omission in marking or labeling goods as containing materials from protected species. Such material includes, but is not limited to, ivory from elephants and walruses, tortoise shell, crocodile skin, whalebone, rhinoceros horn, some species of coral and certain woods. Restrictions on the importation, exportation, sale, transfer, and/or possession of goods containing materials from protected species derive from international, federal, and state laws and regulations promulgated thereunder. Laws include, but are not limited to, the Convention on International Trade in Endangered Species of Flora and Fauna (CITES), the Endangered Species Act (ESA) and the Marine Mammals Protection Act (MMPA). States currently restricting trade of protected species include, but are not limited to, California, New York and New Jersey. Prospective buyers are on notice that several countries completely prohibit importation of property made, all or in part, of protected materials. Some countries require special permits, such as a CITES permit, from the relevant regulating authority in the countries of exportation and importation as well. Potential buyers intending to import the property into another country should be familiar with the relevant customs laws and regulations prior to bidding on goods containing material from protected species. Regulations may vary as the U.S. generally prohibits importation of articles containing material(s) from species it has designated endangered or threatened if the articles are less than 100 years old, subject to certain exceptions. It shall be the potential buyer's sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property as described in the aforementioned paragraphs. All buyers agree to comply with any and all domestic and international restrictions on the trade of protected species as a condition of the sale. Please note that the ability to obtain an export license or certificate does not ensure the ability to obtain an import license or certificate in another country, and vice versa. It is the buyer's responsibility to obtain any export or import licenses and/or certificates as well as any other required documentation. CTFA is not able to assist the buyer in attempting to obtain the appropriate licenses and/or certificates, and there is no assurance that an export license or certificate can be obtained. The inability or delay in obtaining permits, licenses or other permissions to import or export goods containing material from protected species will not constitute a basis for rescission or cancellation of the sale of said goods or the delay in payment of purchased items in accordance with these Bidder Terms and Conditions. BIDDING TERMS: The auctioneer will determine the highest bidder. The auctioneer alone has the right to reopen the bidding of an item at any time if deemed necessary due to a dispute. If there is a tie bid between the floor and Internet or absentee bid, the floor bid takes precedence. In the event of a tie internet bid, the auctioneer will choose the highest bidder. CTFA and its representatives reserve the right to remove those attendees who impede preview and/or the auction. CTFA is not responsible for any errors in bids, omissions of bids, or failure to execute bids and shall have no liability to any bidder for any technical or other failure associated with internet, absentee bidding, or telephone bidding. In the event of an on-site utilities or internet services interruption, the auction will be suspended until such a time that the utility can be restored. Consignors are not allowed to bid on their own merchandise nor have any agent bid on their behalf. If the Auctioneer recognizes such bidding, the Auctioneer reserves the right to withdraw any or all items consigned by the offending consignor. ABSENTEE BIDDING: CTFA will accept absentee bids if pre-authorized by mail, phone, email, online, or in-person. In-Person absentee bidders must use the absentee bid form and clearly mark the lot number, title and maximum bid amount. If there are two (2) identical bids placed on the same item, priority will be given to the first bid received. All bids must be left in increments as published for that particular auction. If a bid is "out of increment," the auctioneer will automatically round the bid down to the next correct increment. Seller(s) agree to allow the Auctioneer to accept and execute absentee bids in a competitive manner for potential buyers and under the CTFA absentee bidding terms and conditions. During the live sale, the auctioneer will execute absentee bids competitively (starting with the lowest possible bid point) up to the maximum amount indicated. ONLINE BIDDING: Online bidding through www.CTfirearmsauction.com, Live Auctioneers, Invaluable, Hibid, Proxibid, or other bidding platforms may be available. These terms and conditions apply, as well as additional terms and conditions for each third-party platform. These Terms & Conditions will take deference over any posted online terms and agreements. A surcharge may be added for third party online platforms. Refer to the bidding platform of choice for the final buyer's premium. If there is a tie bid between the internet bidding venues and the floor, the floor bid takes precedence. Due to our fast paced auctions and bids coming from floor bidders, phone bidders, Internet bidders and absentee bids, the auctioneer has the final word on all item(s) sold. The bidder assumes the risk of winning an item online and discovering the item has sold to another bidder. This is due to the final call of the auctioneer and the operator not being able to re-open that lot. Registered Online bidders are fully responsible for accidental bidding as if they bid normally. BID RESULTS: CTFA will only contact successful bidders. Invoices are sent within 24 hours of auction end. The invoice will include the lot info, hammer price, premium, shipping, insurance, and any other charges that apply. Please hold phone inquiries regarding bid success until after receiving the invoice. For verifications, CTFA cannot provide winning bid information until the second business day after the auction. CTFA will not provide bidder information to any outside sources. TELEPHONE BIDDING: Requests for phone lines must be received at least three (3) days prior to the auction date. CTFA cannot guarantee phone lines but will make every attempt to accommodate those who wish to participate live via phones. Phone lines are provided to qualified bidders at CTFA's preference. Please contact us directly to arrange phone bidding.203-710-0189. Minimum bid requirements may apply. BIDDERS PRESENT AND TAKING ITEMS DURING AND AFTER AUCTION: Since item liability transfers upon a successful bid, items paid for must be packed, transported and/or removed by the buyer at his/ her own risk after the close of the sale. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. If any employee or agent of CTFA shall pack or transport the merchandise, it is fully at the risk and responsibility and expense of the buyer. CTFA shall not be held liable for any loss or damage that may be caused by the said agent or employee. RESERVES: The majority of our items are unreserved, but occasionally items may carry a moderate reserve. Please note that when a lot carries a reserve, the reserve is at or below the low estimate. In the case of a reserved item, the seller has authorized the auctioneer to bid on their behalf until the reserve price is reached. The auctioneer will note if a buyer is bidding against the reserve. PAYMENT TERMS: CTFA accepts Visa, MasterCard, Discover, American Express, personal checks, certified checks, wire transfers, money orders, and cash. Any invoice totaling more than $50,000 must be paid within three (3) business days of the auction date. All other merchandise must be paid in full within seven (7) days of the date of the invoice.Upon payment in full, it is the bidder's responsibility to submit any additional information necessary, including an FFL, to initiate transfer and shipping. Invoices over $5,000 may be subject to mandatory check or wire payment. All transaction fees associated with payment method are non-refundable. All goods not retrieved by buyer within 30 days after the invoice date, shall be subject to a storage fee of $50 per item per month. Buyer authorizes CTFA to sell, at their standard commission and consignment contract terms, any goods not retrieved after a 90 day period in any manner deemed appropriate by CTFA and the proceeds will be applied to any outstanding balance due from the buyer. CREDIT CARDS: Link for online credit card payment will be listed in the buyers invoice. Credit Card payments are subject to maximum buyers premium, and can be discounted by 3% if payment is received by cash, check, money order or wire transfer. Credit Card payments are only accepted from the buyers name listed on the invoice. CTFA reserves the right to refuse to ship to a different address than the billing address on the credit card being used. CTFA does not allow credit card chargebacks for any reason and any delivered firearms subject to a chargeback will be considered as a stolen gun and reported immediately to Law Enforcement. Credit cards information is not stored and payment for invoices is the buyers responsibility. We do not use third party billing services and the buyers credit card will not be automatically charged. CHECK: There will be a $40.00 service charge for returned checks. Make checks payable to: CT Firearms Auction LLC. Checks can be mailed to: CT Firearms Auction LLC 8 Metals Drive, Plantsville CT 06479. CTFA reserves the right to hold items paid for by personal or company check until said check clears (14 days). CTFA has the right to hold all checks over $2,000. Customers who have an established successful buying history with CTFA may be exempt from this requirement. First time buyers paying by check may be subject to additional requirements such as bank letter of credit. WIRE TRANSFERS: Wire transfers are accepted for invoices totaling more than $5,000 USD. Invoices below $5,000 may be subject to a $30 transaction fee. NON-PAYMENT: In the few situations where a successful bidder does not remit payment when due, CTFA will proceed with the legal steps necessary to protect its interests and will block the bidder from future auction participation. SALES TAX: CTFA is required to collect sales tax where applicable. It is the bidder's responsibility to know the sales and use tax law in their locality and know what sales and use tax will be due upon their purchase. Lots are subject to all applicable state and local taxes, unless appropriate resale permits are on file with CTFA prior to invoicing. Bidder agrees to pay CTFA the actual amount of tax due in the event that sales tax is not properly collected due to: 1) an expired, inaccurate, or inappropriate tax certificate or declaration, 2) an incorrect interpretation of the applicable statute, 3) or any other reason. The appropriate form or certificate must be on file and verified by CTFA five days prior to Auction, or tax must be paid; only if such form or certificate is received by CTFA within 4 days after the Auction can a refund of tax paid be made. Lots from different auctions may not be aggregated for sales tax purposes. NFA TRANSFERS: National Firearms Act Weapons and Destructive Devices (DD) Processing to Dealers: Buyer must provide CTFA with a copy of their receiving dealers active FFL and their SOT. Estimated time for processing and approval of the required Form 3 can take 3 days to 3 months, dealer to dealer via E-File is usually less than a week. Individuals IN CT: Law requires a completed Form 4, or Form 5 for deactivated guns. CTFA will prepare and sign the front of the applicable transfer form, and send to the individual buyer or meet with them directly. Individuals are responsible for completing requirements for fingerprints and photo, as well as completing applicable portions of the reverse side of the form. Estimated time for processing and approval of Form 4 is 6-12+ months.Dealers and Individuals that bid on and win NFA or DD items own the items and are fully responsible for payment within terms regardless of whether the BATF approves their taking physical possession of the items. CTFA will not cancel the sale due to BATF disapproval for any reason. SAFETY: Since all firearms sold are "collectible" items, CTFA does not test the safety or warrant functionality of these firearms. All firearm purchases should be examined by a certified gunsmith prior to shooting. DENIAL OF SALE: CTFA reserves the right to deny the sale of a firearm to any buyer, for any reason, at any time in the sales process. WITHDRAWAL OF PROPERTY: CTFA reserves the right to withdraw any property from the auction at any time and shall have no liability whatsoever for such withdrawal. DEFINITIONS: CURIO & RELIC (C&R): Per BATF: To be recognized as C&R items, 478.11 specifies that firearms must fall within one of the following categories: Firearms which were manufactured at least 50 years prior to the current date, but not including replicas of such firearms; Firearms which are certified by the curator of a municipal, State, or Federal museum which exhibits firearms to be curios or relics of museum interest; and Any other firearms which derive a substantial part of their monetary value from the fact that they are novel, rare, bizarre, or because of their association with some historical figure, period, or event. Firearms automatically attain C&R status when they are 50 years old. Any firearm that is at least 50 years old, and in its original configuration, would qualify as a C&R firearm. It is not necessary for such firearms to be listed in ATF's C&R list. ANTIQUE FIREARMS: Per BATF: The term "antique firearm" means- any firearm (including any firearm with a matchlock, flintlock, percussion cap, or similar type of ignition system) manufactured in or before 1898; or any replica of any firearm described in subparagraph (A) if such replica- is not designed or redesigned for using rimfire or conventional centerfire fixed ammunition, or uses rimfire or conventional centerfire fixed ammunition which is no longer manufactured in the United States and which is not readily available in the ordinary channels of commercial trade; or any muzzle loading rifle, muzzle loading shotgun, or muzzle loading pistol, which is designed to use black powder, or a black powder substitute, and which cannot use fixed ammunition. For purposes of this subparagraph, the term "antique firearm" shall not include any weapon which incorporates a firearm frame or receiver, any firearm which is converted into a muzzle loading weapon, or any muzzle loading weapon which can be readily converted to fire fixed ammunition by replacing the barrel, bolt, breechblock, or any combination thereof." FFL: Federal Firearms Licensee with a current and valid license to be a firearms Dealer / Manufacturer / Importer CURIO & RELIC HOLDER: FFL type 03 or C&R license or Collector NFA (National Firearms Act of 1934) Weapons (commonly called "Class 3"): A shotgun having a barrel or barrels of less than 18 inches in length; A weapon made from a shotgun if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 18 inches in length; A rifle having a barrel or barrels of less than 16 inches in length; A weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length; Any other weapon, as defined in subsection (e); A machine gun; Any silencer (as defined in section 921 of title 18, United States Code); and A destructive device. DESTRUCTIVE DEVICES: A missile having an explosive or incendiary charge of more than 1/4 oz. Any type of weapon by whatever name known which will, or which may readily be converted to expel a projectile, by the action of an explosive or other propellant, the barrel or barrels of which have a bore greater than one-half inch in diameter. A combination of parts designed and intended for use in converting a device into a destructive device and from which a destructive device can be readily assembled. MODERN FIREARMS: Any firearm that does not already classify as a C&R, NFA Weapon or Antique and is under the purview of the Gun Control Act of 1968.
Listing Information
PLEASE NOTE NEW START TIME! September 2024 Online-Only Firearms Auction Friday September 20th at 1:00 PM EST. Pre-bidding, Live-Online, Absentee bids, together with Simulcast Auction with Live Stream. MIlitary Surplus, Shotguns, Revolvers, Pistols, Antiques, Black Powder, Modern Semi-Automatic Rifles and hand guns.

1
Astra A-100 .40 S&W Semi Auto Pistol
Description Astra model A-100 imported by E.A.A. Cocoa FL, chambered in .40 S&W with a 3.5" barrel. Features stainless steel frame with partly polished slide. Black plastic grips, serrated hammer, serrated magazine release, and untextured trigger. Le...

2
Auto Ordnance USAF Commemorative 1911A1 .45 Pistol
Description Auto Ordnance American Historical Foundation United States Air Force Commemorative Limited Edition 1911A1 in .45 ACP with one, seven round removable magazine and a 5" barrel. Composite grip plates with inlaid United States Air Force medal...

3
Beretta 950BS .22 Short Semi Auto Pistol
Description Beretta 950BS chambered in .22 Short with one, six round removable magazine and a 2.5" tip up barrel. Black finished alloy frame with checkered polymer grips with push button magazine release. Single action trigger and hammer with frame m...

4
Beretta 87BB .22 LR Semi Auto Pistol 2001
Description Beretta 87BB chambered in .22 long rifle with two, ten round removable magazine and a 3.5" barrel. Manufactured in 2000 with AS date code. Black finished alloy frame with checkered wood PB grips. Textured push button magazine release and ...

5
Beretta 950BS .25 ACP Semi Auto Pistol
Description Beretta 950BS chambered in .25 ACP with one, eight round removable magazine and a 2.375" tip up barrel. Black finished alloy frame with checkered polymer Beretta grips with push button magazine release. Single action trigger and hammer wi...

6
Beretta 21A "BobCat" .22 LR Semi Auto Pistol
Description Beretta 21A BobCat chambered in .22 long rifle with one, seven round removable magazine and a 2.5" tip up barrel. Black finished alloy frame with wood Beretta grips. Serrated push button magazine release and tip up barrel release. Double/...

7
Beretta BU9 Nano 9mm Semi Auto Pistol
Description Beretta BU9 Nano chambered in 9mm with one, eight round removable magazine, one, seven round removable magazine, and a 3.07" barrel. Black polymer frame with textured front and backstrap. Polymer trigger with trigger safety. Black serrate...

8
Beretta 950BS Minx .22 Short Semi Auto Pistol
Description Beretta Model 950-BS Minx in .22 Short with one, six round removable magazine and a 2.5" tip up barrel. Checkered black composite grip plates. Blued trigger guard, solid trigger, hammer, serrated slide and barrel. Lower left side of frame...

9
Boberg Arms XR45-S .45 ACP Bullpup Pistol
Description Boberg Arms XR45-S chambered in .45 ACP with two, six round removable magazines and a 3.75" barrel. Recoil operated semi automatic bullpup pistol with textured black polymer grips on a black aluminum alloy frame. Double action only trig...

10
Norarmco Budischowsky TP-70 .25 ACP Semi Pistol
Description Norarmco Budischowsky TP-70 in .25 ACP with one, six round removable magazine and a 2.5" barrel. Checkered black composite grip plates. Stainless steel frame, serrated trigger, serrated hammer and serrated slide. Magwell located serrated ...

12
Glock 23 Gen 3 .40 S&W Semi Auto Pistol
Description Third Generation Glock 23 chambered in .40 Smith & Wesson with one, thirteen round removable magazine and a 4.02" barrel. Textured polymer compact frame with finger grooves and under barrel accessories rail. Serrated magazine and slide ca...

13
HK P30 V3 .40 S&W Semi Auto Pistol
Description Heckler & Koch P30 V3 chambered in .40 Smith & Wesson with two, ten round removable magazines and a 3.9" cold hammer forged barrel. Polymer frame with replaceable back straps, lateral grip plates, textured finger grooves, and picatinny r...

14
Estate Pistol Lot 2 Pcs Pistols
Description Estate Pistol lot with two pieces. Intratec Cat 9 in 9mm with one, seven round removable magazine and a 3" barrel. Textured composite grip on frame. Blued serrated metal slide. Notch fixed sight. Comes in its factory box with matching wri...

15
High Standard The Victor .22 LR Semi Auto Pistol
Description High Standard The Victor in .22 Long Rifle with one, ten round removable magazine and a 5.5" top ribbed heavy Bull barrel. Made in Hamden Connecticut. Checkered contoured wood grip plates. Blued frame, serrated slide and barrel. Serrated ...

16
High Standard Supermatic Citation .22 LR Pistol
Description High Standard Supermatic Citation in .22 Long Rifle with one, ten round removable magazine and a 7.25" fluted barrel. Made in Hamden Connecticut. Checkered wood grip plates with left side thumb contour. Blued frame, serrated slide and bar...

17
High Standard Supermatic Tournament .22 LR Pistol
Description High Standard Model 106 Military Supermatic Tournament in .22 Long Rifle with one, ten round removable magazine and a 6.75" barrel. Checkered wood grip plates. Blued frame, serrated slide and barrel. Case colored magazine release and serr...

18
Estate Derringer 3 Pcs Lot Pistols
Description Estate Derringer lot with three pieces. Two High Standard Derringers in .22 Magnum with a two round capacity and a 3.5" over under barrel. Made in East Hartford Connecticut. One with black composite grip plates and the other missing the g...

19
High Standard Supermatic Citation .22 LR Pistol
Description High Standard Supermatic Citation in .22 Long Rifle with one, ten round removable magazine and a 5.5" heavy Bull barrel. Made in Hamden Connecticut. Checkered contoured wood grip plates. Blued frame, serrated slide and barrel. Case colore...

21
Indian Arms Corp. Automatic .380 ACP Pistol
Description Indian Arms Corp. Model Automatic .380 chambered in .380 ACP with a 3.25" barrel and a 6 round removable magazine. Features stainless steel construction with checkered hardwood grips with company medallions. Serrated slide with safety/dec...

22
Kahr P-45 .45 ACP Semi Auto Pistol
Description Kahr Arms model P-45 chambered in .45 ACP with two, six round removable magazines and a 3.54" barrel. Black polymer frame with after market custom stippling on the grip. Serrated push button magazine release and stainless slide release. S...

23
KelTec P11 9mm Semi Auto Pistol
Description Kel-Tec P11chambered in 9mm with two, ten round removable magazines and a 3.1" barrel. Black polymer frame with textured grips. Double action only trigger with internal hammer and transfer bar safety. Stainless serrated slide with white t...

24
IMI Magnum Research Desert Eagle 9mm Pistol
Description Israel Military Industries Desert Eagle Pistol chambered in 9mm with a 3.5" barrel. Manufactured in Israel by IMI and imported by Magnum Research, Marked on the right side of the frame. Matte stainless steel frame with textured polymer gr...

25
Remington XP-100 .35 Rem Bolt Action Pistol
Description Remington XP-100 in .35 Remington with a single round capacity and a 15" barrel. Checkered composite grip on frame. Black composite trigger guard. Serrated blued trigger, bolt and barrel. Rear receiver serrated safety switch. Bottom and f...

26
S&W M&P 9C 9mm Semi Auto Pistol
Description Smith & Wesson M&P 9c chambered in 9mm with two, ten round removable magazines and a 3.5" barrel. Textured grip on composite frame with removable backstrap plates. Composite untextured trigger. Blued serrated metal slide and barrel. Lower...

27
Smith & Wesson M&P45 Compact .45 Semi Auto Pistol
Description Smith & Wesson M&P45 Compact chambered in .45 ACP with two, eight round removable magazines and a 4" barrel. Textured polymer frame with interchangeable backstrap/palm swell and under barrel accessories rai. Single action striker fired po...

28
Smith & Wesson M&P 22 .22LR Semi Auto Pistol
Description Smith & Wesson M&P 22 chambered in .22 long rifle with six, ten round removable magazines and a 4.1" threaded barrel. Textured polymer frame with picatinny under barrel accessories rail. Striker fired polymer trigger with trigger safety. ...

29
S&W 41 .22 Long Rifle Semi Auto Pistol
Description Smith & Wesson 41 chambered in .22 long rifle with two, ten round removable magazines and a 7" barrel. Blued steel frame with serrated front strap and checkered wood wrap around grips. Serrated trigger and slide release. Checkered push b...

30
Smith & Wesson 39-2 9mm Semi Auto Pistol
Description Smith & Wesson Model 39-2 in 9mm with one, eight round removable magazine and a 4" barrel. Smooth wood grip plates. Nickel finished frame and serrated slide. Blued trigger and serrated hammer. Magwell located lanyard loop. Lower left side...

31
Smith & Wesson 6904 9mm Semi Auto Pistol
Description Smith & Wesson Model 6904 in 9mm with one, twelve round removable magazine and a 3.5" barrel. Black checkered composite Xenoy wrap around grip plate. Blued frame, trigger, bobbed hammer and serrated slide. Lower left side of frame checker...

32
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

33
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

34
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

35
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

36
Smith & Wesson M&P 9 Shield 9mm Semi Auto Pistol
Description Smith & Wesson M&P 9 Shield chambered in 9mm with one, eight round magazine, one, seven round magazine, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated slide sto...

37
Smith & Wesson M&P9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

38
Sig Sauer P250SC 9mm Semi Auto Pistol
Description Sig Sauer P250SC chambered in 9mm with one, ten round removable magazine and a 3.9" barrel. Polymer Sub Compact frame with textured grip. Serrated push button magazine release and ambidextrous slide release. Double action only trigger wit...

39
German Sig Sauer P230SL .380 ACP Semi Auto Pistol
Description Sig Sauer P230SL chambered in .380 ACP with two, seven round removable magazines and a 3.5" barrel. Manufactured in Germany in 1993 (KD) by Sig Sauer and imported by Sig Arms, marked on the slide. Matte stainless steel frame with heel mag...

40
Sig Sauer P232 .380 ACP Semi Auto Pistol
Description Sig Sauer Model P232 in .380 ACP (9mm Kurz) with one, seven round removable magazine and a 3.5" barrel. Made in Germany. Textured composite grip plates. Blued frame, trigger, hammer and serrated slide. Magwell located serrated magazine re...

41
Sig Sauer P229 9mm Semi Auto Pistol Germany
Description Sig Sauer P229 chambered in 9mm with two, ten round removable magazines and a 3.8" barrel. Manufactured in Germany by Sig Sauer and imported by Sig Arms NH, marked on the right side of the frame, and left side of the slide. Black finished...

42
Springfield Armory XDm-9 9mm Semi Auto Pistol
Description Springfield Armory XDm-9 chambered in 9mm with three, nineteen round removable magazine and a 5.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger with ...

43
Springfield Armory XDm-9 Stainless 9mm Pistol
Description Springfield Armory XDm-9 chambered in 9mm with three, nineteen round removable magazine and a 4.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger with ...

44
Springfield Armory XD-45 .45 ACP Semi Auto Pistol
Description Springfield Armory XD-45 chambered in .45 ACP with three, thirteen round removable magazines and a 4.25" barrel. Textured polymer frame with under barrel accessories rail. Polymer striker fired trigger with trigger safety and grip safety....

45
Springfield XD-45 Sub Compact Mod 2 .45 Pistol
Description Springfield Armory XD-45 Sub Compact Mod 2 chambered in .45 ACP with one, twelve round magazine, one, nine round magazine, and a 3.3" barrel. Textured polymer frame with under barrel accessories rail and grip safety. Single action striker...

46
Springfield Armory XDS-45 .45 ACP Semi Auto Pistol
Description Springfield Armory XDS-45 in .45 ACP with two varied capacity removable magazines and a 3.25" barrel. Textured black composite grip on frame. Serrated composite trigger. Blued serrated metal slide and barrel. Ambidextrous magazine release...

47
Springfield Armory XDS-9 9mm Semi Auto Pistol
Description Springfield Armory XDS-9 in 9mm with three varied capacity magazines and a 3.25" barrel. Made in Croatia. Textured black composite grip on frame. Serrated composite trigger. Blued serrated metal slide and barrel. Ambidextrous magazine rel...

48
Springfield Armory XDM-45 .45 ACP Semi Auto Pistol
Description Springfield Armory XDM-45 chambered on .45 ACP with six, thirteen round removable magazines and a 5.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger w...

49
Springfield Armory XDM-40 .40 S&W Semi Auto Pistol
Description Springfield Armory XDM-40 chambered in .40 Smith & Wesson with seven, sixteen round removable magazines and a 5.25" match barrel. Black polymer frame with aftermarket grip tape texturing and a under barrel accessories rail. Striker fired ...

50
Springfield Armory XDm-9 9mm Semi Auto Pistol
Description Springfield Armory XDM-9 chambered in 9mm with three, nineteen round removable magazine and a 5.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger with ...

51
Taurus .380 ACP Lot 2Pcs 738, Curve Pistol
Description This lot is for two Taurus pistols chambered in .380 ACP, first is a model 738 TCP with two, six round magazines and a 3.3" barrel. Textured polymer frame with polymer trigger and internal hammer. Stainless steel serrated slide with fixed...

53
Thompson Center Contender .35 Rem Pistol 2Pc Lot
Description This lot is for two Thompson Center Contenders both chambered in .35 Remington with single shot capacities and Super 14" barrels. Both have blued finishes with break action levers and single action triggers/hammers. One pistol has a wood ...

55
Walther P99 9mm Semi Auto Pistol
Description Walther P99 chambered in 9mm with two, fifteen round removable magazines, two, ten round magazines, and a 4" barrel. Manufactured in Germany in 2003 by Walther and imported by Smith & Wesson, marked on the right side of the slide. Militar...

56
Walther P22 .22 LR Semi Auto Pistol
Description Walther P22 chambered in .22 long rifle with two, ten round removable magazines and a 5" barrel with barrel weight. Textured polymer frame with under barrel accessories rail. Ambidextrous paddle magazine release. Double/single action trig...

57
Casull Arms CA 2000 .22 LR Revolver
Description Casull Arms CA 2000 chambered in .22 long rifle with a five shot cylinder and a 1 3/4" barrel. Matte stainless steel barrel and frame. Polished stainless unfluted cylinder. Double action only folding trigger with internal hammer. Frame mo...

58
Heritage Rough Rider .22 LR Revolver
Description Heritage Rough Rider chambered in .22 long rifle with a six-shot cylinder and a 4 3/4" barrel. Black oxide finished alloy steel cylinder, alloy steel barrel, and zinc alloy frame. Single action trigger and hammer with manual safety. Cocob...

59
North American Arms NAA-22LR .22LR Revolver
Description North American Arms NAA-22LR chambered in .22 Long Rifle with a five-shot cylinder and a 1.13" barrel. Stainless steel barrel, frame, and fluted cylinder. Single action trigger and hammer. Rosewood birds head grips. Rear notch and half mo...

60
NAA Companion Cap and Ball .22 Percussion Revolver
Description North American Arms NAA-22LR-CB Companion chambered in .22 caliber/ #11 percussion with a five shot cylinder with nipples and a 1 1/8" barrel. Stainless steel barrel, frame, and cylinder. Single action trigger and hammer. Smooth wood bird...

61
Ruger New Model Single Six .22 LR/Mag Revolver
Description Ruger New Model Single Six in .22 Long Rifle or Magnum with a six round capacity and a 6.5" barrel. Smooth wood grip plates. Polished stainless steel trigger guard, trigger, frame, cylinder and barrel. Right side of frame loading gate. Un...

62
Ruger New Model Super Blackhawk .44 Mag Revolver
Description Ruger New Model Super Blackhawk in .44 Magnum with a six round capacity and a 7.5" barrel. Hogue dimpled black rubber grip. Blued trigger guard, trigger, frame, serrated hammer and barrel. Right side of frame loading gate. Under barrel cy...

63
Ruger LC9 9mm Semi Auto Pistol
Description Ruger LC9 chambered in 9mm with one, seven round magazine and a 3.12" barrel. Manufactured in 2014 with serial number 326-33525. Polymer frame with textured grip. Blued metal trigger with bobbed hammer. Frame mounted manual thumb safety a...

64
Smith & Wesson 36 Chiefs Special .38 Spl Revolver
Description Smith & Wesson Model 36 Chiefs Special in .38 S&W Special with a five round capacity and a 2" barrel. Checkered wood grip plates. Blued frame, cylinder and barrel. Case colored serrated Service trigger and checkered hammer. Left side of f...

65
Smith & Wesson 64-3 .38 Spl Revolver
Description Smith & Wesson Model 64-3 in .38 Special with a six round capacity and a 4" barrel. Checkered Pachmayr black rubber wrap around grip. Polished stainless steel frame, cylinder and barrel. Untextured trigger and checkered hammer. Left side ...

66
Smith & Wesson 64-3 .38 Spl Revolver
Description Smith & Wesson Model 64-3 in .38 Special with a six round capacity and a 4" barrel. Checkered wood grip plates with removable composite spacer. Polished stainless steel frame, cylinder and barrel. Untextured trigger and checkered hammer. ...

67
Smith & Wesson 17 .22 LR Revolver
Description Smith & Wesson Model 17 K-22 Masterpiece in .22 Long Rifle with a 6" barrel. Checkered Goncalo Alves wood grip plates. Blued frame, cylinder and barrel. Case colored Target trigger and checkered Target hammer. Left side of frame checkere...

68
Smith & Wesson 19-3 .357 Mag Revolver
Description Smith & Wesson 19-3 in .357 Magnum with a six round capacity and a 4" barrel. Checkered Goncalo Alves wood grip plates. Blued frame, cylinder and barrel. Case colored serrated trigger and checkered hammer. Left side of frame checkered cy...

69
Smith & Wesson 48-3 .22 MRF Revolver
Description Smith & Wesson Model 48-3 in .22 Magnum Rimfire with a six round capacity and a 4" barrel. Checkered wood grip plates. Blued frame, cylinder and barrel. Case colored serrated trigger and checkered hammer. Left side of frame checkered cyli...

70
Smith & Wesson 36 Chiefs Special .38 Spl Revolver
Description Smith & Wesson Model 36 Chiefs Special in .38 S&W Special with a five round capacity and a 2" barrel. Checkered wood grip plates. Blued frame, cylinder and barrel. Case colored serrated Service trigger and checkered hammer. Left side of f...

71
Smith & Wesson 19-3 .357 Mag Revolver
Description Smith and Wesson model 19-3 chambered in .357 Magnum with a 4" barrel and a 6 round fluted cylinder. Features oversized walnut target grips with S&W medallion, knurled full target hammer with case blue, serrated trigger with case blue, fa...

72
Smith & Wesson 38 Bodyguard Airweight Revolver
Description Smith and Wesson Model 38 chambered .38 Special with a 2" barrel and a 5 round capacity fluted cylinder. Features a blued finish alloy frame with hammer shroud, case blue serrated hammer, smooth face case blue trigger, steel fluted cylind...

73
Smith & Wesson 66-4 .357 Mag Revolver
Description Smith & Wesson Model 66-4 in .357 Magnum with a six round capacity and a 4" barrel. Checkered rubber grip plates. Polished stainless steel frame, cylinder and barrel. Case colored untextured trigger and checkered hammer. Left side of fram...

74
Smith & Wesson 686-3 .357 Mag Revolver
Description Smith & Wesson Model 686-3 Distinguished Combat Magnum in .357 Magnum with a six round capacity and a 6" barrel. Checkered Goncalo Alves wood grip plates. Polished stainless steel frame, cylinder and barrel. Untextured trigger and checker...

75
Smith & Wesson 2 Pcs Lot Revolver
Description Smith & Wesson lot with two pieces. S&W 32 Safety Hammerless in .32 ACP with a five round capacity and a 3" barrel. Checkered composite grip plates. Blued frame, cylinder and barrel. Rear notch and front fixed blade sight. S&W Model 19-2 ...

76
Smith & Wesson 59 9mm Semi Auto Pistol
Description Smith & Wesson Model 59 in 9mm with one, fourteen round removable magazine and a 4" barrel. Checkered black composite grip plates. Blued frame, trigger, serrated hammer and serrated slide. Magwell located lanyard loop. Lower left side of ...

77
Smith & Wesson 60 Stainless .38 Spl Revolver
Description Smith & Wesson Model 60 Stainless Steel Chiefs Special in .38 S&W Special with a five round capacity and a 2" barrel. Checkered wood grip plates. Polished stainless frame, cylinder and barrel. Serrated Service trigger and checkered hammer...

79
Bushmaster XM15-E2S 5.56/.223 Semi Auto Rifle
Description Bushmaster XM15-E2S chambered in .223 Remington and 5.56 NATO with a 20" 1:9 twist featureless barrel. A2 style front gas block with sling swivel and adjustable front post. A2 style rifle length polymer handguard. Flat top upper receiver ...

80
Century Arms C308 Sporter .308 Semi Auto Rifle
Description Century Arms C308 Sporter chambered in .308 Winchester/7.62x51 NATO with two, twenty round box magazines, one, five round magazine and a 18" barrel with muzzle break. Copy of a HK 91 Roller delayed blowback rifle, built by Century Arms u...

81
NEF/H&R Rifle/Shotgun Lot 2Pcs .45/70 12 Ga
Description This lot is for two single shot long guns. First is a New England Firearms Handi Rifle SB2 chambered in .45-70 Government with a 22" barrel. Blued barrel, frame, trigger, hammer, and action release. Adjustable rear sight and fixed front b...

82
Hi Point 4595 Carbine .45 ACP Semi Auto Rifle
Description UPDATE: Check Local/State Laws on Assault Weapons Bans BEFORE bidding. Hi Point 4595 Carbine chambered in .45 ACP with one, nine round removable magazine and a 17.5" barrel. Black finished barrel and metal receiver. Polymer handguard with...

83
Mossberg 500 12Ga Pump Action Pistol Grip Shotgun
Description Mossberg 500 chambered in 12 gauge for 2 3/4" and 3" shells with a seven round tubular magazine and a 21" barrel with a fixed CYL choke. Matte finished barrel, aluminum heat shield, magazine tube, drilled and tapped alloy receiver, and tr...

84
U.S. Property Mossberg 42 M-B .22 Cal Rifle
Description U.S. Property marked Mossberg 42 M-B chambered in .22 short, long, and long rifle with a 23" barrel. Patinated blued barrel, receiver, and bolt handle. The receiver is drilled and tapped with mounted scope rings. Tang mounted safety selec...

86
Remington 870 20 GA Pump Action Shotgun
Description Remington 870 chambered in 20 gauge for 2 3/4" and 3" shells with a four round tubular magazine and a 21" vented rib barrel with removable Remington MOD choke. Satin black finished barrel, magazine tube, receiver, loading gate, and trigge...

87
Remington 700 .308 Winchester Bolt Action Rifle
Description Remington 700 chambered in .308 Winchester with a five round removable magazine and a 26" barrel. Black finished barrel, receiver, and bolt. Push to fire safety. The top of the receiver is drilled and tapped with a picatinny optics rail. ...

88
Ruger American .223 Remington Bolt Action Rifle
Description Ruger American chambered in .223 Remington with one, five round removable magazine and a 20" barrel. Manufactured in 2014 with serial number 693-91370. Matte finished barrel, frame, and bolt handle. The top of the receiver is drilled and ...

89
Sig Sauer P365 X-Macro 9mm Semi Auto Pistol
Description Sig Sauer P365 X-Macro chambered in 9mm with three, seventeen round removable magazines and a 3.7" carbon steel barrel. Compact polymer frame with textured grip, interchangeable backstrap, and M1913 accessories rail with a mounted Streaml...

90
Sig Sauer P320 M18 9mm Semi Auto Pistol
Description Sig Sauer P320 M18 chambered in 9mm with three, twenty one round magazines, three seventeen round flush fit magazines, and a 3.9" carbon steel barrel. FDE polymer frame with textured grip and under barrel accessories rail. Standard curved...

91
Seecamp LWS-32 .32ACP Semi Auto Pistol
Description ***UPADTE This pistol is NOT C&R Eligible*** Milford, CT manufactured Seecamp model LWS-32 chambered in .32 ACP with a 2" barrel. Features a polished stainless steel construction, black synthetic grips, serrated slide grooves, flat faced ...

92
SCCY CPX-1 9mm Semi Auto Pistol
Description SCCY CPX-1 chambered in 9mm with two, ten round removable magazines and a 3.1" barrel. Textured polymer frame with finger grooves. Double action only trigger with ambidextrous frame mounted manual thumb safety. Stainless steel serrated sl...

93
Tikka Finnish M27 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka M27 Mosin Nagant chambered in 7.62x54r with a five round integral magazine and a 27" barrel. Manufactured in 1935 and imported by Century Arms, marked on the barrel. Front cleaning rod and bayonet lug with "popsicle stick" n...

94
New England Westinghouse M91 Finn Cap 7.62x54r
Description Finnish Capture New England Westinghouse M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 31.5" barrel with front cleaning rod. Manufactured in 1915 and imported by Century Arms C.A.I., marked on the bottom...

95
Russian Capture Mauser Werke ar 43 K98 8mm Rifle
Description Russian Capture Mauser-Werke AG code ar 43 K98 chambered in 7.92x57mm (8mm Mauser) with a five round internal magazine and a 24" barrel with bayonet lug. Manufactured in 1943 and imported by Century Arms C.A.I., marked on the right side o...

96
Tikka Finnish M91 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka made M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 30.5" heavy weight barrel barrel. Imported by CAI ST Albans, marked on the barrel. Blued finish with Tikka barrel shank and hexagon receiv...

97
Tikka Finnish M91/30 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka M91/30 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 28 3/4" barrel with cleaning rod. Manufactured in 1944 with serial number 69464. Blued barrel, bands, round low wall receiver, magazine, and...

98
Finnish M91 VKT Mosin 7.62x54R Bolt Action Rifle
Description Finnish model M91 VKT Mosin bolt action rifle chambered in 7.62x54Rmm, with a 31" barrel, and a 5 round integral magazine. Features hardwood stock with 1891 era sling swivels, brass pinned top cover, and finger splice joint. Receiver is m...

99
VKT M91 Mosin Nagant 7.62x54R Bolt Rifle
Description VKT M91 Finnish Mosin Nagant in 7.62x54mmR with a five round capacity and a 31" barrel. Import marked on the muzzle end of barrel: C.A.I. ST ALB VT. Blued metal butt plate. Smooth wood stock with finger spliced front forend. Blued trigger...

100
Tikka Finnish M91 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 31.5" barrel. Manufactured in 1940 and imported by Century Arms C.A.I., marked on the barrel. Blued finish with Tikka barrel shank and hexagon ...

101
VKT Finnish M91 Mosin Nagant 7.62x54r Rifle
Description Finnish VKT M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 30.5" barrel. Manufactured in 1942 and imported by Century Arms, C.A.I., marked on the side of the barrel. Blued barrel, bands, hexagonal receive...

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Nov 15
Plantsville, CT



Sponsored Links

September 2024 Online-Only Firearms Auction

Connecticut Firearms Auction

Connecticut Firearms Auction


Contact:
Phone:
Sale Location
8 Metals Drive
Plantsville, CT 06479
Sale Dates and Times
Friday Sep 20, 2024 Completed
Sale Terms and Conditions
Connecticut Firearms Auction Terms of Sale All bidders are required to read the Terms and Conditions of the Sale before bidding with Connecticut Firearms Auction LLC and/ or CT Firearms Auction collectively referred to below as "CTFA". Those who bid are bound by these Terms and Conditions of the Sale, as amended by any oral announcement, published or posted notices, which together form the contract of the sale between the successful bidder "buyer", "CTFA" and seller "consignor" of the lot. ACCEPTANCE OF TERMS: When bidding on any lot offered by CTFA, the bidder indicates acceptance of the following Terms of Sale. Any participation in the auction binds the bidder to agreement of these terms whether or not buyer has read or understood said terms. The terms in writing contained herein are subject to change without notice and bidder agrees that the most recently published Terms of Sale as published or amended on the website at the beginning of the auction shall apply. BIDDER ELIGIBILITY AND REGISTRATION: Buyers warrant that they are at least age 18 and possess a valid photo ID. Buyers are required to provide a verifiable address of residence, phone number, and email in writing at least 48 hours prior to auction date. Long guns will only be sold to persons 18 years of age, or older. Handguns will only be sold to those persons 21 years of age or older. It is the bidder's responsibility to take buyers premium, shipping, and insurance costs into consideration when bidding on items. It is the buyers responsibility to personally inspect auction items, or request condition reports and detailed questions prior to bidding. TITLE: Title to all merchandise shall pass to the highest bidder at the fall of the auctioneer's hammer. The buyer will then assume all risk and full responsibility of the lot purchased once ownership has changed. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. BUYER'S PREMIUM: A buyers premium will be added to all successful bids and is payable by the buyer as part of the total purchase cost. Base buyers premium (phone, live in-person and in-house absentee) of 18% applies to phone and direct absentee bidding. This is the lowest buyers premium offered, and all bids must be submitted at least 24 hours prior to auction time. A 3% discount is offered for cash, check, wire, and money order payments. Buyers premium for bidding through all online platforms (including www.ctfirearmsauction.com) varies from 21% to 25% with a 3% discount for check or cash equivalent. Please refer to your bidding platform for actual buyers premium. Buyers premium is non-negotiable. Split payment methods (cash/credit) lose 3% discount. LIMITED GUARANTEE: CTFA makes every effort to accurately describe all items offered in its sales. The descriptions and condition reports carry a limited guarantee. It is a guarantee to protect the buyer against errors in descriptive fact and major discrepancies that would have a significant effect upon the value of the item. This limited guarantee covers the following: DESCRIPTIVE FACTS: Manufacturer, model, caliber, serial numbers, barrel length, special features, major restoration, modification, counterfeits, reproductions or major fabrications not disclosed in the description. CONDITION DISCREPANCIES: It is the bidder's responsibility (present, online, or absentee bidders) to determine by inspection by themselves (or a hired professional) the exact condition of each item prior to bidding on the item. CTFA makes every effort to follow the commonly accepted and current condition guidelines for modern and antique firearms such as the NRA Modern and Antique grading system, Blue Book percentage of finish rating, and Standard Catalog of Firearms Modern grading. It is important to note that these systems have changed over the years, and present different opinions based on the edition and authors. Condition reports are the opinion of CTFA and represent the observations of the cataloger. BIDDERS RESPONSIBILITIES: It is the bidder's responsibility to initiate contact with CTFA in request for additional information regarding the items. Submit all questions regarding upcoming auction items at least 48 hours prior to the date of auction. CTFA will make every effort to answer all submitted questions in a timely manner. In-Person Bidders must examine all items prior to purchase and again upon receipt. Any discrepancies must be noted prior to leaving the facility. If bidding via absentee or online, then it is the bidders responsibility to examine the lot immediately upon receipt. If a major discrepancy should be discovered, it is the buyers responsibility to contact us immediately. The limited guarantee is null and void 28 days after the auction date (NOT THE DATE OF RECEIPT). If a buyer pays late and receives items late, through action or inaction on their part, the buyer is disqualified from any guarantee. Under no circumstances will CTFA be responsible for lost profits or other financial damages. If it is agreed that an item may be returned, it is the buyer's responsibility to return it in the same state and condition as received. Returned items that are modified, damaged by buyer, or mishandled void all guarantees. LIMITATIONS: The limited guarantee covers major discrepancies in condition reports, such as error in fact, visible repairs or restorations, or major differences in percent of finish or bore(+/- 20%). This limited guarantee is only available to the buyer of record. Please refer to POST SALE RETURN POLICY. Except as stated in the limited guarantee above, CTFA will not be held responsible for typographical errors or errors of omission. This limited guarantee does NOT cover imperfections, patina, slight damages, handling marks, natural imperfections, undisclosed minor blemishes, finish differences, wood-to-metal fit issues, surface cracks or chips in wood, dings and dents, unverifiable age, and other similar differences that are inherent in the firearms or other antiques and collectibles offered for sale. Firearm internal mechanisms and moving parts are not inspected, and guns are not test fired unless otherwise noted. If mechanical or other working parts are inoperable, even if working at the time of sale, CTFA is not liable due to the inherent nature of the age of these used items. CTFA will not be responsible for shipping costs, after auction appraisal fees, testing or any other post auction costs. This limited guarantee DOES NOT APPLY to any ammunition whatsoever. All Ammunition will be sold "as-is" (see below) AS-IS: Auction lots and items offered with the designation "AS-IS", "Poor condition",or "For parts or restoration" are offered without guarantee, all sales are final and sold without refund or buyer recourse. POST SALE RETURN AND REFUND POLICY: If a major description or condition discrepancy is discovered within 28 calendar days of the auction, a buyer may submit a request in writing for a full refund under the following conditions: The request for refund must be received in writing before the end of the 28th day. The auction lot in question must be received by CTFA within 3 days of the request for return and refund. After receipt of the lot in question, CTFA will perform an evaluation, and determine the validity of the request. If a return and refund is granted, CTFA will notify the buyer within 7 calendar days of receipt. CTFA does not offer adjustments or partial refunds. Refunds are only given for the total hammer price, and restocking fees up to the total amount of buyers premium may apply. Accepted refunds are paid only by paper check, and submitted to the buyer 30 days after receipt of items. FIREARMS TRANSFER AND ELIGIBILITY: All firearm transfers will be in strict accordance with all International, Federal, State and local laws. Buyer is responsible for adhering to all country, state and local laws before bidding. If a bidder is unable to import, purchase, own, or receive a firearm for any reason, they should not bid on these items. If a buyer later determines they cannot legally own a firearm or accept delivery, the bid is still a valid contract, and the buyer is still obligated to remit payment in accordance with payment terms. CTFA does not offer returns, refunds or cancellations on the basis of ineligibility or failure to facilitate transfer. BUYER OF RECORD: All firearms must transfer to the registered buyer on record. CTFA will not modify, or re-invoice any firearms for another party. DENIAL OF TRANSFER: If "Denied" by FBI / NICS background check buyers will not be able to take possession of the firearm and the firearm will be consigned to the next available firearm auction. Dealers and Individuals that bid on and win items own the items and are fully responsible for payment within terms regardless of whether the FBI / NICS approves their taking physical possession of the items. CTFA will not cancel the sale due to disapproval for any reason. If a buyer is appealing a "Denied" decision, we will hold the firearm for a grace period of 30 days, with monthly storage fees in effect on the 31st day. IN-PERSON PAYMENT AND PICKUP: Only the person to whom the bidder number is registered may accept transfer of the firearm(s) at the conclusion of the sale - Federal Law disallows anyone else from accepting the transfer. Buyers may not bid on or pay for modern firearms on behalf of another party. Modern Firearms (1898 and later) Can be picked up in person with a valid CT Pistol Permit or applicable Certificate Can be picked up by FFL Licensee or listed responsible person with "Live Copy" of License Eligible Curio & Relic Firearms can be picked by by C&R Holders with "Live Copy" of license. Non Connecticut Residents (without FFL or C&R) may not pick up modern or NFA firearms in person at our CT Facility. Antique Firearms Can be picked up in person with valid photo ID by persons over the age of 18. No background check required, all states of residence eligible. Non-Guns may be picked up by any eligible buyer (or buyers agent) with a valid photo ID. Ammunition: Any buyer receiving ammunition in the State of CT must possess a Valid CT Pistol Permit, Long Gun Certificate, or Ammunition Certificate per state laws. SHIPPING: Shipping and transportation costs are the responsibility of the buyer. Unless otherwise noted, all items shipped in-house, and will be billed on your invoice. Modern firearms are legally required to be shipped to a BATF licensed FFL business within their state of residence for transfer. For states that allow shipment of C&R firearms to the C&R license holder, CTFA reserves the right to ship those C&R firearms to the address listed on C&R license. Modern handguns only ship via UPS 2-Day Air or U.S.P.S. Priority Mail. Modern long guns are shipped via UPS ground. IT IS THE BUYERS RESPONSIBILITY TO CONTACT THEIR RECEIVING FFL AND ARRANGE TRANSFER AND FFL REMITTANCE. The receiving dealer must submit a current copy of their FFL for each auction invoice. FFL's are not kept on file. FFL's should be submitted to sales@ctfirearmsauction.com or through our website here: https://ctfirearmsauction.com/submit-your-ffl/ FEES: Standard Hand Guns ship for $40. Standard long guns ship for $55. Oversize shipping charges will apply to guns over 45" Overall Length. Additional fees apply for shipping addresses outside the Continental United States. DISASSEMBLY: Firearms, auction items, and accessories may be disassembled for shipping. This may include scopes, cases, barrels, and stocks. ADDRESS: CTFA is not responsible for incorrect shipping addresses. Buyers must verify the shipping address listed on their invoice prior to shipment. Standard items packed internally by CTFA will ship approximately one to fourteen business days after payment AND applicable paperwork (FFL) is received. INSURANCE: All firearms in transit are insured at no additional cost up to $2,500 per shipment. Packages valued over $2,500 require insurance at a rate of 1% per invoiced dollar unless the buyer declines in writing 48 hours prior to package shipment. OVERSIZE: Certain auction items exceed standard shipping fees and may require oversized and heavy shipping surcharges. Every effort is made to note these charges prior to catalog publication, but may be included on a buyers invoice post auction without notice. AMMUNITION: Ammunition does not ship with an associated gun. Separate charges apply for ammunition shipments, and may require heavy or oversize charges. INTERNATIONAL: CTFA welcomes international buyers. CTFA can provide, upon request, recommended firearms exporters and international shippers. It shall be the potential buyer's sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property and for paying all shipping costs, customs and duties on the items. By law, CTFA cannot, and will not, declare lesser values for any international purchases and all shipments will include the invoice with purchase totals including the buyer's premium and shipping cost. CTFA does not offer in-house international shipping (or export) any firearms, ammunition, or weapons REGARDLESS OF AGE OR STATUS OF THE LOT. All international shipping must be performed by a licensed exporter or third party shipper. CTFA does offer domestic shipping to the exporter of the buyer's choice. Buyer is responsible for contacting and employing the exporter. Exporter FFL documents must be sent to sales@ctfirearmsauction.com prior to domestic shipment. CTFA strongly recommends making contact with an exporter prior to bidding for pricing, process and timeline information. GOODS MADE FROM OR CONTAINING MATERIALS FROM PROTECTED SPECIES: CTFA does not accept any responsibility or liability for the sale of items containing materials from protected species or for any omission in marking or labeling goods as containing materials from protected species. Such material includes, but is not limited to, ivory from elephants and walruses, tortoise shell, crocodile skin, whalebone, rhinoceros horn, some species of coral and certain woods. Restrictions on the importation, exportation, sale, transfer, and/or possession of goods containing materials from protected species derive from international, federal, and state laws and regulations promulgated thereunder. Laws include, but are not limited to, the Convention on International Trade in Endangered Species of Flora and Fauna (CITES), the Endangered Species Act (ESA) and the Marine Mammals Protection Act (MMPA). States currently restricting trade of protected species include, but are not limited to, California, New York and New Jersey. Prospective buyers are on notice that several countries completely prohibit importation of property made, all or in part, of protected materials. Some countries require special permits, such as a CITES permit, from the relevant regulating authority in the countries of exportation and importation as well. Potential buyers intending to import the property into another country should be familiar with the relevant customs laws and regulations prior to bidding on goods containing material from protected species. Regulations may vary as the U.S. generally prohibits importation of articles containing material(s) from species it has designated endangered or threatened if the articles are less than 100 years old, subject to certain exceptions. It shall be the potential buyer's sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property as described in the aforementioned paragraphs. All buyers agree to comply with any and all domestic and international restrictions on the trade of protected species as a condition of the sale. Please note that the ability to obtain an export license or certificate does not ensure the ability to obtain an import license or certificate in another country, and vice versa. It is the buyer's responsibility to obtain any export or import licenses and/or certificates as well as any other required documentation. CTFA is not able to assist the buyer in attempting to obtain the appropriate licenses and/or certificates, and there is no assurance that an export license or certificate can be obtained. The inability or delay in obtaining permits, licenses or other permissions to import or export goods containing material from protected species will not constitute a basis for rescission or cancellation of the sale of said goods or the delay in payment of purchased items in accordance with these Bidder Terms and Conditions. BIDDING TERMS: The auctioneer will determine the highest bidder. The auctioneer alone has the right to reopen the bidding of an item at any time if deemed necessary due to a dispute. If there is a tie bid between the floor and Internet or absentee bid, the floor bid takes precedence. In the event of a tie internet bid, the auctioneer will choose the highest bidder. CTFA and its representatives reserve the right to remove those attendees who impede preview and/or the auction. CTFA is not responsible for any errors in bids, omissions of bids, or failure to execute bids and shall have no liability to any bidder for any technical or other failure associated with internet, absentee bidding, or telephone bidding. In the event of an on-site utilities or internet services interruption, the auction will be suspended until such a time that the utility can be restored. Consignors are not allowed to bid on their own merchandise nor have any agent bid on their behalf. If the Auctioneer recognizes such bidding, the Auctioneer reserves the right to withdraw any or all items consigned by the offending consignor. ABSENTEE BIDDING: CTFA will accept absentee bids if pre-authorized by mail, phone, email, online, or in-person. In-Person absentee bidders must use the absentee bid form and clearly mark the lot number, title and maximum bid amount. If there are two (2) identical bids placed on the same item, priority will be given to the first bid received. All bids must be left in increments as published for that particular auction. If a bid is "out of increment," the auctioneer will automatically round the bid down to the next correct increment. Seller(s) agree to allow the Auctioneer to accept and execute absentee bids in a competitive manner for potential buyers and under the CTFA absentee bidding terms and conditions. During the live sale, the auctioneer will execute absentee bids competitively (starting with the lowest possible bid point) up to the maximum amount indicated. ONLINE BIDDING: Online bidding through www.CTfirearmsauction.com, Live Auctioneers, Invaluable, Hibid, Proxibid, or other bidding platforms may be available. These terms and conditions apply, as well as additional terms and conditions for each third-party platform. These Terms & Conditions will take deference over any posted online terms and agreements. A surcharge may be added for third party online platforms. Refer to the bidding platform of choice for the final buyer's premium. If there is a tie bid between the internet bidding venues and the floor, the floor bid takes precedence. Due to our fast paced auctions and bids coming from floor bidders, phone bidders, Internet bidders and absentee bids, the auctioneer has the final word on all item(s) sold. The bidder assumes the risk of winning an item online and discovering the item has sold to another bidder. This is due to the final call of the auctioneer and the operator not being able to re-open that lot. Registered Online bidders are fully responsible for accidental bidding as if they bid normally. BID RESULTS: CTFA will only contact successful bidders. Invoices are sent within 24 hours of auction end. The invoice will include the lot info, hammer price, premium, shipping, insurance, and any other charges that apply. Please hold phone inquiries regarding bid success until after receiving the invoice. For verifications, CTFA cannot provide winning bid information until the second business day after the auction. CTFA will not provide bidder information to any outside sources. TELEPHONE BIDDING: Requests for phone lines must be received at least three (3) days prior to the auction date. CTFA cannot guarantee phone lines but will make every attempt to accommodate those who wish to participate live via phones. Phone lines are provided to qualified bidders at CTFA's preference. Please contact us directly to arrange phone bidding.203-710-0189. Minimum bid requirements may apply. BIDDERS PRESENT AND TAKING ITEMS DURING AND AFTER AUCTION: Since item liability transfers upon a successful bid, items paid for must be packed, transported and/or removed by the buyer at his/ her own risk after the close of the sale. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. If any employee or agent of CTFA shall pack or transport the merchandise, it is fully at the risk and responsibility and expense of the buyer. CTFA shall not be held liable for any loss or damage that may be caused by the said agent or employee. RESERVES: The majority of our items are unreserved, but occasionally items may carry a moderate reserve. Please note that when a lot carries a reserve, the reserve is at or below the low estimate. In the case of a reserved item, the seller has authorized the auctioneer to bid on their behalf until the reserve price is reached. The auctioneer will note if a buyer is bidding against the reserve. PAYMENT TERMS: CTFA accepts Visa, MasterCard, Discover, American Express, personal checks, certified checks, wire transfers, money orders, and cash. Any invoice totaling more than $50,000 must be paid within three (3) business days of the auction date. All other merchandise must be paid in full within seven (7) days of the date of the invoice.Upon payment in full, it is the bidder's responsibility to submit any additional information necessary, including an FFL, to initiate transfer and shipping. Invoices over $5,000 may be subject to mandatory check or wire payment. All transaction fees associated with payment method are non-refundable. All goods not retrieved by buyer within 30 days after the invoice date, shall be subject to a storage fee of $50 per item per month. Buyer authorizes CTFA to sell, at their standard commission and consignment contract terms, any goods not retrieved after a 90 day period in any manner deemed appropriate by CTFA and the proceeds will be applied to any outstanding balance due from the buyer. CREDIT CARDS: Link for online credit card payment will be listed in the buyers invoice. Credit Card payments are subject to maximum buyers premium, and can be discounted by 3% if payment is received by cash, check, money order or wire transfer. Credit Card payments are only accepted from the buyers name listed on the invoice. CTFA reserves the right to refuse to ship to a different address than the billing address on the credit card being used. CTFA does not allow credit card chargebacks for any reason and any delivered firearms subject to a chargeback will be considered as a stolen gun and reported immediately to Law Enforcement. Credit cards information is not stored and payment for invoices is the buyers responsibility. We do not use third party billing services and the buyers credit card will not be automatically charged. CHECK: There will be a $40.00 service charge for returned checks. Make checks payable to: CT Firearms Auction LLC. Checks can be mailed to: CT Firearms Auction LLC 8 Metals Drive, Plantsville CT 06479. CTFA reserves the right to hold items paid for by personal or company check until said check clears (14 days). CTFA has the right to hold all checks over $2,000. Customers who have an established successful buying history with CTFA may be exempt from this requirement. First time buyers paying by check may be subject to additional requirements such as bank letter of credit. WIRE TRANSFERS: Wire transfers are accepted for invoices totaling more than $5,000 USD. Invoices below $5,000 may be subject to a $30 transaction fee. NON-PAYMENT: In the few situations where a successful bidder does not remit payment when due, CTFA will proceed with the legal steps necessary to protect its interests and will block the bidder from future auction participation. SALES TAX: CTFA is required to collect sales tax where applicable. It is the bidder's responsibility to know the sales and use tax law in their locality and know what sales and use tax will be due upon their purchase. Lots are subject to all applicable state and local taxes, unless appropriate resale permits are on file with CTFA prior to invoicing. Bidder agrees to pay CTFA the actual amount of tax due in the event that sales tax is not properly collected due to: 1) an expired, inaccurate, or inappropriate tax certificate or declaration, 2) an incorrect interpretation of the applicable statute, 3) or any other reason. The appropriate form or certificate must be on file and verified by CTFA five days prior to Auction, or tax must be paid; only if such form or certificate is received by CTFA within 4 days after the Auction can a refund of tax paid be made. Lots from different auctions may not be aggregated for sales tax purposes. NFA TRANSFERS: National Firearms Act Weapons and Destructive Devices (DD) Processing to Dealers: Buyer must provide CTFA with a copy of their receiving dealers active FFL and their SOT. Estimated time for processing and approval of the required Form 3 can take 3 days to 3 months, dealer to dealer via E-File is usually less than a week. Individuals IN CT: Law requires a completed Form 4, or Form 5 for deactivated guns. CTFA will prepare and sign the front of the applicable transfer form, and send to the individual buyer or meet with them directly. Individuals are responsible for completing requirements for fingerprints and photo, as well as completing applicable portions of the reverse side of the form. Estimated time for processing and approval of Form 4 is 6-12+ months.Dealers and Individuals that bid on and win NFA or DD items own the items and are fully responsible for payment within terms regardless of whether the BATF approves their taking physical possession of the items. CTFA will not cancel the sale due to BATF disapproval for any reason. SAFETY: Since all firearms sold are "collectible" items, CTFA does not test the safety or warrant functionality of these firearms. All firearm purchases should be examined by a certified gunsmith prior to shooting. DENIAL OF SALE: CTFA reserves the right to deny the sale of a firearm to any buyer, for any reason, at any time in the sales process. WITHDRAWAL OF PROPERTY: CTFA reserves the right to withdraw any property from the auction at any time and shall have no liability whatsoever for such withdrawal. DEFINITIONS: CURIO & RELIC (C&R): Per BATF: To be recognized as C&R items, 478.11 specifies that firearms must fall within one of the following categories: Firearms which were manufactured at least 50 years prior to the current date, but not including replicas of such firearms; Firearms which are certified by the curator of a municipal, State, or Federal museum which exhibits firearms to be curios or relics of museum interest; and Any other firearms which derive a substantial part of their monetary value from the fact that they are novel, rare, bizarre, or because of their association with some historical figure, period, or event. Firearms automatically attain C&R status when they are 50 years old. Any firearm that is at least 50 years old, and in its original configuration, would qualify as a C&R firearm. It is not necessary for such firearms to be listed in ATF's C&R list. ANTIQUE FIREARMS: Per BATF: The term "antique firearm" means- any firearm (including any firearm with a matchlock, flintlock, percussion cap, or similar type of ignition system) manufactured in or before 1898; or any replica of any firearm described in subparagraph (A) if such replica- is not designed or redesigned for using rimfire or conventional centerfire fixed ammunition, or uses rimfire or conventional centerfire fixed ammunition which is no longer manufactured in the United States and which is not readily available in the ordinary channels of commercial trade; or any muzzle loading rifle, muzzle loading shotgun, or muzzle loading pistol, which is designed to use black powder, or a black powder substitute, and which cannot use fixed ammunition. For purposes of this subparagraph, the term "antique firearm" shall not include any weapon which incorporates a firearm frame or receiver, any firearm which is converted into a muzzle loading weapon, or any muzzle loading weapon which can be readily converted to fire fixed ammunition by replacing the barrel, bolt, breechblock, or any combination thereof." FFL: Federal Firearms Licensee with a current and valid license to be a firearms Dealer / Manufacturer / Importer CURIO & RELIC HOLDER: FFL type 03 or C&R license or Collector NFA (National Firearms Act of 1934) Weapons (commonly called "Class 3"): A shotgun having a barrel or barrels of less than 18 inches in length; A weapon made from a shotgun if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 18 inches in length; A rifle having a barrel or barrels of less than 16 inches in length; A weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length; Any other weapon, as defined in subsection (e); A machine gun; Any silencer (as defined in section 921 of title 18, United States Code); and A destructive device. DESTRUCTIVE DEVICES: A missile having an explosive or incendiary charge of more than 1/4 oz. Any type of weapon by whatever name known which will, or which may readily be converted to expel a projectile, by the action of an explosive or other propellant, the barrel or barrels of which have a bore greater than one-half inch in diameter. A combination of parts designed and intended for use in converting a device into a destructive device and from which a destructive device can be readily assembled. MODERN FIREARMS: Any firearm that does not already classify as a C&R, NFA Weapon or Antique and is under the purview of the Gun Control Act of 1968.
Listing Details
PLEASE NOTE NEW START TIME! September 2024 Online-Only Firearms Auction Friday September 20th at 1:00 PM EST. Pre-bidding, Live-Online, Absentee bids, together with Simulcast Auction with Live Stream. MIlitary Surplus, Shotguns, Revolvers, Pistols, Antiques, Black Powder, Modern Semi-Automatic Rifles and hand guns.

1
Astra A-100 .40 S&W Semi Auto Pistol
Description Astra model A-100 imported by E.A.A. Cocoa FL, chambered in .40 S&W with a 3.5" barrel. Features stainless steel frame with partly polished slide. Black plastic grips, serrated hammer, serrated magazine release, and untextured trigger. Le...

2
Auto Ordnance USAF Commemorative 1911A1 .45 Pistol
Description Auto Ordnance American Historical Foundation United States Air Force Commemorative Limited Edition 1911A1 in .45 ACP with one, seven round removable magazine and a 5" barrel. Composite grip plates with inlaid United States Air Force medal...

3
Beretta 950BS .22 Short Semi Auto Pistol
Description Beretta 950BS chambered in .22 Short with one, six round removable magazine and a 2.5" tip up barrel. Black finished alloy frame with checkered polymer grips with push button magazine release. Single action trigger and hammer with frame m...

4
Beretta 87BB .22 LR Semi Auto Pistol 2001
Description Beretta 87BB chambered in .22 long rifle with two, ten round removable magazine and a 3.5" barrel. Manufactured in 2000 with AS date code. Black finished alloy frame with checkered wood PB grips. Textured push button magazine release and ...

5
Beretta 950BS .25 ACP Semi Auto Pistol
Description Beretta 950BS chambered in .25 ACP with one, eight round removable magazine and a 2.375" tip up barrel. Black finished alloy frame with checkered polymer Beretta grips with push button magazine release. Single action trigger and hammer wi...

6
Beretta 21A "BobCat" .22 LR Semi Auto Pistol
Description Beretta 21A BobCat chambered in .22 long rifle with one, seven round removable magazine and a 2.5" tip up barrel. Black finished alloy frame with wood Beretta grips. Serrated push button magazine release and tip up barrel release. Double/...

7
Beretta BU9 Nano 9mm Semi Auto Pistol
Description Beretta BU9 Nano chambered in 9mm with one, eight round removable magazine, one, seven round removable magazine, and a 3.07" barrel. Black polymer frame with textured front and backstrap. Polymer trigger with trigger safety. Black serrate...

8
Beretta 950BS Minx .22 Short Semi Auto Pistol
Description Beretta Model 950-BS Minx in .22 Short with one, six round removable magazine and a 2.5" tip up barrel. Checkered black composite grip plates. Blued trigger guard, solid trigger, hammer, serrated slide and barrel. Lower left side of frame...

9
Boberg Arms XR45-S .45 ACP Bullpup Pistol
Description Boberg Arms XR45-S chambered in .45 ACP with two, six round removable magazines and a 3.75" barrel. Recoil operated semi automatic bullpup pistol with textured black polymer grips on a black aluminum alloy frame. Double action only trig...

10
Norarmco Budischowsky TP-70 .25 ACP Semi Pistol
Description Norarmco Budischowsky TP-70 in .25 ACP with one, six round removable magazine and a 2.5" barrel. Checkered black composite grip plates. Stainless steel frame, serrated trigger, serrated hammer and serrated slide. Magwell located serrated ...

12
Glock 23 Gen 3 .40 S&W Semi Auto Pistol
Description Third Generation Glock 23 chambered in .40 Smith & Wesson with one, thirteen round removable magazine and a 4.02" barrel. Textured polymer compact frame with finger grooves and under barrel accessories rail. Serrated magazine and slide ca...

13
HK P30 V3 .40 S&W Semi Auto Pistol
Description Heckler & Koch P30 V3 chambered in .40 Smith & Wesson with two, ten round removable magazines and a 3.9" cold hammer forged barrel. Polymer frame with replaceable back straps, lateral grip plates, textured finger grooves, and picatinny r...

14
Estate Pistol Lot 2 Pcs Pistols
Description Estate Pistol lot with two pieces. Intratec Cat 9 in 9mm with one, seven round removable magazine and a 3" barrel. Textured composite grip on frame. Blued serrated metal slide. Notch fixed sight. Comes in its factory box with matching wri...

15
High Standard The Victor .22 LR Semi Auto Pistol
Description High Standard The Victor in .22 Long Rifle with one, ten round removable magazine and a 5.5" top ribbed heavy Bull barrel. Made in Hamden Connecticut. Checkered contoured wood grip plates. Blued frame, serrated slide and barrel. Serrated ...

16
High Standard Supermatic Citation .22 LR Pistol
Description High Standard Supermatic Citation in .22 Long Rifle with one, ten round removable magazine and a 7.25" fluted barrel. Made in Hamden Connecticut. Checkered wood grip plates with left side thumb contour. Blued frame, serrated slide and bar...

17
High Standard Supermatic Tournament .22 LR Pistol
Description High Standard Model 106 Military Supermatic Tournament in .22 Long Rifle with one, ten round removable magazine and a 6.75" barrel. Checkered wood grip plates. Blued frame, serrated slide and barrel. Case colored magazine release and serr...

18
Estate Derringer 3 Pcs Lot Pistols
Description Estate Derringer lot with three pieces. Two High Standard Derringers in .22 Magnum with a two round capacity and a 3.5" over under barrel. Made in East Hartford Connecticut. One with black composite grip plates and the other missing the g...

19
High Standard Supermatic Citation .22 LR Pistol
Description High Standard Supermatic Citation in .22 Long Rifle with one, ten round removable magazine and a 5.5" heavy Bull barrel. Made in Hamden Connecticut. Checkered contoured wood grip plates. Blued frame, serrated slide and barrel. Case colore...

21
Indian Arms Corp. Automatic .380 ACP Pistol
Description Indian Arms Corp. Model Automatic .380 chambered in .380 ACP with a 3.25" barrel and a 6 round removable magazine. Features stainless steel construction with checkered hardwood grips with company medallions. Serrated slide with safety/dec...

22
Kahr P-45 .45 ACP Semi Auto Pistol
Description Kahr Arms model P-45 chambered in .45 ACP with two, six round removable magazines and a 3.54" barrel. Black polymer frame with after market custom stippling on the grip. Serrated push button magazine release and stainless slide release. S...

23
KelTec P11 9mm Semi Auto Pistol
Description Kel-Tec P11chambered in 9mm with two, ten round removable magazines and a 3.1" barrel. Black polymer frame with textured grips. Double action only trigger with internal hammer and transfer bar safety. Stainless serrated slide with white t...

24
IMI Magnum Research Desert Eagle 9mm Pistol
Description Israel Military Industries Desert Eagle Pistol chambered in 9mm with a 3.5" barrel. Manufactured in Israel by IMI and imported by Magnum Research, Marked on the right side of the frame. Matte stainless steel frame with textured polymer gr...

25
Remington XP-100 .35 Rem Bolt Action Pistol
Description Remington XP-100 in .35 Remington with a single round capacity and a 15" barrel. Checkered composite grip on frame. Black composite trigger guard. Serrated blued trigger, bolt and barrel. Rear receiver serrated safety switch. Bottom and f...

26
S&W M&P 9C 9mm Semi Auto Pistol
Description Smith & Wesson M&P 9c chambered in 9mm with two, ten round removable magazines and a 3.5" barrel. Textured grip on composite frame with removable backstrap plates. Composite untextured trigger. Blued serrated metal slide and barrel. Lower...

27
Smith & Wesson M&P45 Compact .45 Semi Auto Pistol
Description Smith & Wesson M&P45 Compact chambered in .45 ACP with two, eight round removable magazines and a 4" barrel. Textured polymer frame with interchangeable backstrap/palm swell and under barrel accessories rai. Single action striker fired po...

28
Smith & Wesson M&P 22 .22LR Semi Auto Pistol
Description Smith & Wesson M&P 22 chambered in .22 long rifle with six, ten round removable magazines and a 4.1" threaded barrel. Textured polymer frame with picatinny under barrel accessories rail. Striker fired polymer trigger with trigger safety. ...

29
S&W 41 .22 Long Rifle Semi Auto Pistol
Description Smith & Wesson 41 chambered in .22 long rifle with two, ten round removable magazines and a 7" barrel. Blued steel frame with serrated front strap and checkered wood wrap around grips. Serrated trigger and slide release. Checkered push b...

30
Smith & Wesson 39-2 9mm Semi Auto Pistol
Description Smith & Wesson Model 39-2 in 9mm with one, eight round removable magazine and a 4" barrel. Smooth wood grip plates. Nickel finished frame and serrated slide. Blued trigger and serrated hammer. Magwell located lanyard loop. Lower left side...

31
Smith & Wesson 6904 9mm Semi Auto Pistol
Description Smith & Wesson Model 6904 in 9mm with one, twelve round removable magazine and a 3.5" barrel. Black checkered composite Xenoy wrap around grip plate. Blued frame, trigger, bobbed hammer and serrated slide. Lower left side of frame checker...

32
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

33
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

34
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

35
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

36
Smith & Wesson M&P 9 Shield 9mm Semi Auto Pistol
Description Smith & Wesson M&P 9 Shield chambered in 9mm with one, eight round magazine, one, seven round magazine, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated slide sto...

37
Smith & Wesson M&P9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

38
Sig Sauer P250SC 9mm Semi Auto Pistol
Description Sig Sauer P250SC chambered in 9mm with one, ten round removable magazine and a 3.9" barrel. Polymer Sub Compact frame with textured grip. Serrated push button magazine release and ambidextrous slide release. Double action only trigger wit...

39
German Sig Sauer P230SL .380 ACP Semi Auto Pistol
Description Sig Sauer P230SL chambered in .380 ACP with two, seven round removable magazines and a 3.5" barrel. Manufactured in Germany in 1993 (KD) by Sig Sauer and imported by Sig Arms, marked on the slide. Matte stainless steel frame with heel mag...

40
Sig Sauer P232 .380 ACP Semi Auto Pistol
Description Sig Sauer Model P232 in .380 ACP (9mm Kurz) with one, seven round removable magazine and a 3.5" barrel. Made in Germany. Textured composite grip plates. Blued frame, trigger, hammer and serrated slide. Magwell located serrated magazine re...

41
Sig Sauer P229 9mm Semi Auto Pistol Germany
Description Sig Sauer P229 chambered in 9mm with two, ten round removable magazines and a 3.8" barrel. Manufactured in Germany by Sig Sauer and imported by Sig Arms NH, marked on the right side of the frame, and left side of the slide. Black finished...

42
Springfield Armory XDm-9 9mm Semi Auto Pistol
Description Springfield Armory XDm-9 chambered in 9mm with three, nineteen round removable magazine and a 5.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger with ...

43
Springfield Armory XDm-9 Stainless 9mm Pistol
Description Springfield Armory XDm-9 chambered in 9mm with three, nineteen round removable magazine and a 4.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger with ...

44
Springfield Armory XD-45 .45 ACP Semi Auto Pistol
Description Springfield Armory XD-45 chambered in .45 ACP with three, thirteen round removable magazines and a 4.25" barrel. Textured polymer frame with under barrel accessories rail. Polymer striker fired trigger with trigger safety and grip safety....

45
Springfield XD-45 Sub Compact Mod 2 .45 Pistol
Description Springfield Armory XD-45 Sub Compact Mod 2 chambered in .45 ACP with one, twelve round magazine, one, nine round magazine, and a 3.3" barrel. Textured polymer frame with under barrel accessories rail and grip safety. Single action striker...

46
Springfield Armory XDS-45 .45 ACP Semi Auto Pistol
Description Springfield Armory XDS-45 in .45 ACP with two varied capacity removable magazines and a 3.25" barrel. Textured black composite grip on frame. Serrated composite trigger. Blued serrated metal slide and barrel. Ambidextrous magazine release...

47
Springfield Armory XDS-9 9mm Semi Auto Pistol
Description Springfield Armory XDS-9 in 9mm with three varied capacity magazines and a 3.25" barrel. Made in Croatia. Textured black composite grip on frame. Serrated composite trigger. Blued serrated metal slide and barrel. Ambidextrous magazine rel...

48
Springfield Armory XDM-45 .45 ACP Semi Auto Pistol
Description Springfield Armory XDM-45 chambered on .45 ACP with six, thirteen round removable magazines and a 5.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger w...

49
Springfield Armory XDM-40 .40 S&W Semi Auto Pistol
Description Springfield Armory XDM-40 chambered in .40 Smith & Wesson with seven, sixteen round removable magazines and a 5.25" match barrel. Black polymer frame with aftermarket grip tape texturing and a under barrel accessories rail. Striker fired ...

50
Springfield Armory XDm-9 9mm Semi Auto Pistol
Description Springfield Armory XDM-9 chambered in 9mm with three, nineteen round removable magazine and a 5.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger with ...

51
Taurus .380 ACP Lot 2Pcs 738, Curve Pistol
Description This lot is for two Taurus pistols chambered in .380 ACP, first is a model 738 TCP with two, six round magazines and a 3.3" barrel. Textured polymer frame with polymer trigger and internal hammer. Stainless steel serrated slide with fixed...

53
Thompson Center Contender .35 Rem Pistol 2Pc Lot
Description This lot is for two Thompson Center Contenders both chambered in .35 Remington with single shot capacities and Super 14" barrels. Both have blued finishes with break action levers and single action triggers/hammers. One pistol has a wood ...

55
Walther P99 9mm Semi Auto Pistol
Description Walther P99 chambered in 9mm with two, fifteen round removable magazines, two, ten round magazines, and a 4" barrel. Manufactured in Germany in 2003 by Walther and imported by Smith & Wesson, marked on the right side of the slide. Militar...

56
Walther P22 .22 LR Semi Auto Pistol
Description Walther P22 chambered in .22 long rifle with two, ten round removable magazines and a 5" barrel with barrel weight. Textured polymer frame with under barrel accessories rail. Ambidextrous paddle magazine release. Double/single action trig...

57
Casull Arms CA 2000 .22 LR Revolver
Description Casull Arms CA 2000 chambered in .22 long rifle with a five shot cylinder and a 1 3/4" barrel. Matte stainless steel barrel and frame. Polished stainless unfluted cylinder. Double action only folding trigger with internal hammer. Frame mo...

58
Heritage Rough Rider .22 LR Revolver
Description Heritage Rough Rider chambered in .22 long rifle with a six-shot cylinder and a 4 3/4" barrel. Black oxide finished alloy steel cylinder, alloy steel barrel, and zinc alloy frame. Single action trigger and hammer with manual safety. Cocob...

59
North American Arms NAA-22LR .22LR Revolver
Description North American Arms NAA-22LR chambered in .22 Long Rifle with a five-shot cylinder and a 1.13" barrel. Stainless steel barrel, frame, and fluted cylinder. Single action trigger and hammer. Rosewood birds head grips. Rear notch and half mo...

60
NAA Companion Cap and Ball .22 Percussion Revolver
Description North American Arms NAA-22LR-CB Companion chambered in .22 caliber/ #11 percussion with a five shot cylinder with nipples and a 1 1/8" barrel. Stainless steel barrel, frame, and cylinder. Single action trigger and hammer. Smooth wood bird...

61
Ruger New Model Single Six .22 LR/Mag Revolver
Description Ruger New Model Single Six in .22 Long Rifle or Magnum with a six round capacity and a 6.5" barrel. Smooth wood grip plates. Polished stainless steel trigger guard, trigger, frame, cylinder and barrel. Right side of frame loading gate. Un...

62
Ruger New Model Super Blackhawk .44 Mag Revolver
Description Ruger New Model Super Blackhawk in .44 Magnum with a six round capacity and a 7.5" barrel. Hogue dimpled black rubber grip. Blued trigger guard, trigger, frame, serrated hammer and barrel. Right side of frame loading gate. Under barrel cy...

63
Ruger LC9 9mm Semi Auto Pistol
Description Ruger LC9 chambered in 9mm with one, seven round magazine and a 3.12" barrel. Manufactured in 2014 with serial number 326-33525. Polymer frame with textured grip. Blued metal trigger with bobbed hammer. Frame mounted manual thumb safety a...

64
Smith & Wesson 36 Chiefs Special .38 Spl Revolver
Description Smith & Wesson Model 36 Chiefs Special in .38 S&W Special with a five round capacity and a 2" barrel. Checkered wood grip plates. Blued frame, cylinder and barrel. Case colored serrated Service trigger and checkered hammer. Left side of f...

65
Smith & Wesson 64-3 .38 Spl Revolver
Description Smith & Wesson Model 64-3 in .38 Special with a six round capacity and a 4" barrel. Checkered Pachmayr black rubber wrap around grip. Polished stainless steel frame, cylinder and barrel. Untextured trigger and checkered hammer. Left side ...

66
Smith & Wesson 64-3 .38 Spl Revolver
Description Smith & Wesson Model 64-3 in .38 Special with a six round capacity and a 4" barrel. Checkered wood grip plates with removable composite spacer. Polished stainless steel frame, cylinder and barrel. Untextured trigger and checkered hammer. ...

67
Smith & Wesson 17 .22 LR Revolver
Description Smith & Wesson Model 17 K-22 Masterpiece in .22 Long Rifle with a 6" barrel. Checkered Goncalo Alves wood grip plates. Blued frame, cylinder and barrel. Case colored Target trigger and checkered Target hammer. Left side of frame checkere...

68
Smith & Wesson 19-3 .357 Mag Revolver
Description Smith & Wesson 19-3 in .357 Magnum with a six round capacity and a 4" barrel. Checkered Goncalo Alves wood grip plates. Blued frame, cylinder and barrel. Case colored serrated trigger and checkered hammer. Left side of frame checkered cy...

69
Smith & Wesson 48-3 .22 MRF Revolver
Description Smith & Wesson Model 48-3 in .22 Magnum Rimfire with a six round capacity and a 4" barrel. Checkered wood grip plates. Blued frame, cylinder and barrel. Case colored serrated trigger and checkered hammer. Left side of frame checkered cyli...

70
Smith & Wesson 36 Chiefs Special .38 Spl Revolver
Description Smith & Wesson Model 36 Chiefs Special in .38 S&W Special with a five round capacity and a 2" barrel. Checkered wood grip plates. Blued frame, cylinder and barrel. Case colored serrated Service trigger and checkered hammer. Left side of f...

71
Smith & Wesson 19-3 .357 Mag Revolver
Description Smith and Wesson model 19-3 chambered in .357 Magnum with a 4" barrel and a 6 round fluted cylinder. Features oversized walnut target grips with S&W medallion, knurled full target hammer with case blue, serrated trigger with case blue, fa...

72
Smith & Wesson 38 Bodyguard Airweight Revolver
Description Smith and Wesson Model 38 chambered .38 Special with a 2" barrel and a 5 round capacity fluted cylinder. Features a blued finish alloy frame with hammer shroud, case blue serrated hammer, smooth face case blue trigger, steel fluted cylind...

73
Smith & Wesson 66-4 .357 Mag Revolver
Description Smith & Wesson Model 66-4 in .357 Magnum with a six round capacity and a 4" barrel. Checkered rubber grip plates. Polished stainless steel frame, cylinder and barrel. Case colored untextured trigger and checkered hammer. Left side of fram...

74
Smith & Wesson 686-3 .357 Mag Revolver
Description Smith & Wesson Model 686-3 Distinguished Combat Magnum in .357 Magnum with a six round capacity and a 6" barrel. Checkered Goncalo Alves wood grip plates. Polished stainless steel frame, cylinder and barrel. Untextured trigger and checker...

75
Smith & Wesson 2 Pcs Lot Revolver
Description Smith & Wesson lot with two pieces. S&W 32 Safety Hammerless in .32 ACP with a five round capacity and a 3" barrel. Checkered composite grip plates. Blued frame, cylinder and barrel. Rear notch and front fixed blade sight. S&W Model 19-2 ...

76
Smith & Wesson 59 9mm Semi Auto Pistol
Description Smith & Wesson Model 59 in 9mm with one, fourteen round removable magazine and a 4" barrel. Checkered black composite grip plates. Blued frame, trigger, serrated hammer and serrated slide. Magwell located lanyard loop. Lower left side of ...

77
Smith & Wesson 60 Stainless .38 Spl Revolver
Description Smith & Wesson Model 60 Stainless Steel Chiefs Special in .38 S&W Special with a five round capacity and a 2" barrel. Checkered wood grip plates. Polished stainless frame, cylinder and barrel. Serrated Service trigger and checkered hammer...

79
Bushmaster XM15-E2S 5.56/.223 Semi Auto Rifle
Description Bushmaster XM15-E2S chambered in .223 Remington and 5.56 NATO with a 20" 1:9 twist featureless barrel. A2 style front gas block with sling swivel and adjustable front post. A2 style rifle length polymer handguard. Flat top upper receiver ...

80
Century Arms C308 Sporter .308 Semi Auto Rifle
Description Century Arms C308 Sporter chambered in .308 Winchester/7.62x51 NATO with two, twenty round box magazines, one, five round magazine and a 18" barrel with muzzle break. Copy of a HK 91 Roller delayed blowback rifle, built by Century Arms u...

81
NEF/H&R Rifle/Shotgun Lot 2Pcs .45/70 12 Ga
Description This lot is for two single shot long guns. First is a New England Firearms Handi Rifle SB2 chambered in .45-70 Government with a 22" barrel. Blued barrel, frame, trigger, hammer, and action release. Adjustable rear sight and fixed front b...

82
Hi Point 4595 Carbine .45 ACP Semi Auto Rifle
Description UPDATE: Check Local/State Laws on Assault Weapons Bans BEFORE bidding. Hi Point 4595 Carbine chambered in .45 ACP with one, nine round removable magazine and a 17.5" barrel. Black finished barrel and metal receiver. Polymer handguard with...

83
Mossberg 500 12Ga Pump Action Pistol Grip Shotgun
Description Mossberg 500 chambered in 12 gauge for 2 3/4" and 3" shells with a seven round tubular magazine and a 21" barrel with a fixed CYL choke. Matte finished barrel, aluminum heat shield, magazine tube, drilled and tapped alloy receiver, and tr...

84
U.S. Property Mossberg 42 M-B .22 Cal Rifle
Description U.S. Property marked Mossberg 42 M-B chambered in .22 short, long, and long rifle with a 23" barrel. Patinated blued barrel, receiver, and bolt handle. The receiver is drilled and tapped with mounted scope rings. Tang mounted safety selec...

86
Remington 870 20 GA Pump Action Shotgun
Description Remington 870 chambered in 20 gauge for 2 3/4" and 3" shells with a four round tubular magazine and a 21" vented rib barrel with removable Remington MOD choke. Satin black finished barrel, magazine tube, receiver, loading gate, and trigge...

87
Remington 700 .308 Winchester Bolt Action Rifle
Description Remington 700 chambered in .308 Winchester with a five round removable magazine and a 26" barrel. Black finished barrel, receiver, and bolt. Push to fire safety. The top of the receiver is drilled and tapped with a picatinny optics rail. ...

88
Ruger American .223 Remington Bolt Action Rifle
Description Ruger American chambered in .223 Remington with one, five round removable magazine and a 20" barrel. Manufactured in 2014 with serial number 693-91370. Matte finished barrel, frame, and bolt handle. The top of the receiver is drilled and ...

89
Sig Sauer P365 X-Macro 9mm Semi Auto Pistol
Description Sig Sauer P365 X-Macro chambered in 9mm with three, seventeen round removable magazines and a 3.7" carbon steel barrel. Compact polymer frame with textured grip, interchangeable backstrap, and M1913 accessories rail with a mounted Streaml...

90
Sig Sauer P320 M18 9mm Semi Auto Pistol
Description Sig Sauer P320 M18 chambered in 9mm with three, twenty one round magazines, three seventeen round flush fit magazines, and a 3.9" carbon steel barrel. FDE polymer frame with textured grip and under barrel accessories rail. Standard curved...

91
Seecamp LWS-32 .32ACP Semi Auto Pistol
Description ***UPADTE This pistol is NOT C&R Eligible*** Milford, CT manufactured Seecamp model LWS-32 chambered in .32 ACP with a 2" barrel. Features a polished stainless steel construction, black synthetic grips, serrated slide grooves, flat faced ...

92
SCCY CPX-1 9mm Semi Auto Pistol
Description SCCY CPX-1 chambered in 9mm with two, ten round removable magazines and a 3.1" barrel. Textured polymer frame with finger grooves. Double action only trigger with ambidextrous frame mounted manual thumb safety. Stainless steel serrated sl...

93
Tikka Finnish M27 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka M27 Mosin Nagant chambered in 7.62x54r with a five round integral magazine and a 27" barrel. Manufactured in 1935 and imported by Century Arms, marked on the barrel. Front cleaning rod and bayonet lug with "popsicle stick" n...

94
New England Westinghouse M91 Finn Cap 7.62x54r
Description Finnish Capture New England Westinghouse M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 31.5" barrel with front cleaning rod. Manufactured in 1915 and imported by Century Arms C.A.I., marked on the bottom...

95
Russian Capture Mauser Werke ar 43 K98 8mm Rifle
Description Russian Capture Mauser-Werke AG code ar 43 K98 chambered in 7.92x57mm (8mm Mauser) with a five round internal magazine and a 24" barrel with bayonet lug. Manufactured in 1943 and imported by Century Arms C.A.I., marked on the right side o...

96
Tikka Finnish M91 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka made M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 30.5" heavy weight barrel barrel. Imported by CAI ST Albans, marked on the barrel. Blued finish with Tikka barrel shank and hexagon receiv...

97
Tikka Finnish M91/30 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka M91/30 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 28 3/4" barrel with cleaning rod. Manufactured in 1944 with serial number 69464. Blued barrel, bands, round low wall receiver, magazine, and...

98
Finnish M91 VKT Mosin 7.62x54R Bolt Action Rifle
Description Finnish model M91 VKT Mosin bolt action rifle chambered in 7.62x54Rmm, with a 31" barrel, and a 5 round integral magazine. Features hardwood stock with 1891 era sling swivels, brass pinned top cover, and finger splice joint. Receiver is m...

99
VKT M91 Mosin Nagant 7.62x54R Bolt Rifle
Description VKT M91 Finnish Mosin Nagant in 7.62x54mmR with a five round capacity and a 31" barrel. Import marked on the muzzle end of barrel: C.A.I. ST ALB VT. Blued metal butt plate. Smooth wood stock with finger spliced front forend. Blued trigger...

100
Tikka Finnish M91 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 31.5" barrel. Manufactured in 1940 and imported by Century Arms C.A.I., marked on the barrel. Blued finish with Tikka barrel shank and hexagon ...

101
VKT Finnish M91 Mosin Nagant 7.62x54r Rifle
Description Finnish VKT M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 30.5" barrel. Manufactured in 1942 and imported by Century Arms, C.A.I., marked on the side of the barrel. Blued barrel, bands, hexagonal receive...

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
September 2024 Online-Only Firearms Auction
 Live Auction w/Online Bidding
Auction Date(s)
Friday Sep 20, 2024 Completed
Auction Location

Plantsville, CT 06479
Company
Connecticut Firearms Auction

Website: www.ctfirearmsauction.com

Listing Terms and Conditions
Connecticut Firearms Auction Terms of Sale All bidders are required to read the Terms and Conditions of the Sale before bidding with Connecticut Firearms Auction LLC and/ or CT Firearms Auction collectively referred to below as "CTFA". Those who bid are bound by these Terms and Conditions of the Sale, as amended by any oral announcement, published or posted notices, which together form the contract of the sale between the successful bidder "buyer", "CTFA" and seller "consignor" of the lot. ACCEPTANCE OF TERMS: When bidding on any lot offered by CTFA, the bidder indicates acceptance of the following Terms of Sale. Any participation in the auction binds the bidder to agreement of these terms whether or not buyer has read or understood said terms. The terms in writing contained herein are subject to change without notice and bidder agrees that the most recently published Terms of Sale as published or amended on the website at the beginning of the auction shall apply. BIDDER ELIGIBILITY AND REGISTRATION: Buyers warrant that they are at least age 18 and possess a valid photo ID. Buyers are required to provide a verifiable address of residence, phone number, and email in writing at least 48 hours prior to auction date. Long guns will only be sold to persons 18 years of age, or older. Handguns will only be sold to those persons 21 years of age or older. It is the bidder's responsibility to take buyers premium, shipping, and insurance costs into consideration when bidding on items. It is the buyers responsibility to personally inspect auction items, or request condition reports and detailed questions prior to bidding. TITLE: Title to all merchandise shall pass to the highest bidder at the fall of the auctioneer's hammer. The buyer will then assume all risk and full responsibility of the lot purchased once ownership has changed. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. BUYER'S PREMIUM: A buyers premium will be added to all successful bids and is payable by the buyer as part of the total purchase cost. Base buyers premium (phone, live in-person and in-house absentee) of 18% applies to phone and direct absentee bidding. This is the lowest buyers premium offered, and all bids must be submitted at least 24 hours prior to auction time. A 3% discount is offered for cash, check, wire, and money order payments. Buyers premium for bidding through all online platforms (including www.ctfirearmsauction.com) varies from 21% to 25% with a 3% discount for check or cash equivalent. Please refer to your bidding platform for actual buyers premium. Buyers premium is non-negotiable. Split payment methods (cash/credit) lose 3% discount. LIMITED GUARANTEE: CTFA makes every effort to accurately describe all items offered in its sales. The descriptions and condition reports carry a limited guarantee. It is a guarantee to protect the buyer against errors in descriptive fact and major discrepancies that would have a significant effect upon the value of the item. This limited guarantee covers the following: DESCRIPTIVE FACTS: Manufacturer, model, caliber, serial numbers, barrel length, special features, major restoration, modification, counterfeits, reproductions or major fabrications not disclosed in the description. CONDITION DISCREPANCIES: It is the bidder's responsibility (present, online, or absentee bidders) to determine by inspection by themselves (or a hired professional) the exact condition of each item prior to bidding on the item. CTFA makes every effort to follow the commonly accepted and current condition guidelines for modern and antique firearms such as the NRA Modern and Antique grading system, Blue Book percentage of finish rating, and Standard Catalog of Firearms Modern grading. It is important to note that these systems have changed over the years, and present different opinions based on the edition and authors. Condition reports are the opinion of CTFA and represent the observations of the cataloger. BIDDERS RESPONSIBILITIES: It is the bidder's responsibility to initiate contact with CTFA in request for additional information regarding the items. Submit all questions regarding upcoming auction items at least 48 hours prior to the date of auction. CTFA will make every effort to answer all submitted questions in a timely manner. In-Person Bidders must examine all items prior to purchase and again upon receipt. Any discrepancies must be noted prior to leaving the facility. If bidding via absentee or online, then it is the bidders responsibility to examine the lot immediately upon receipt. If a major discrepancy should be discovered, it is the buyers responsibility to contact us immediately. The limited guarantee is null and void 28 days after the auction date (NOT THE DATE OF RECEIPT). If a buyer pays late and receives items late, through action or inaction on their part, the buyer is disqualified from any guarantee. Under no circumstances will CTFA be responsible for lost profits or other financial damages. If it is agreed that an item may be returned, it is the buyer's responsibility to return it in the same state and condition as received. Returned items that are modified, damaged by buyer, or mishandled void all guarantees. LIMITATIONS: The limited guarantee covers major discrepancies in condition reports, such as error in fact, visible repairs or restorations, or major differences in percent of finish or bore(+/- 20%). This limited guarantee is only available to the buyer of record. Please refer to POST SALE RETURN POLICY. Except as stated in the limited guarantee above, CTFA will not be held responsible for typographical errors or errors of omission. This limited guarantee does NOT cover imperfections, patina, slight damages, handling marks, natural imperfections, undisclosed minor blemishes, finish differences, wood-to-metal fit issues, surface cracks or chips in wood, dings and dents, unverifiable age, and other similar differences that are inherent in the firearms or other antiques and collectibles offered for sale. Firearm internal mechanisms and moving parts are not inspected, and guns are not test fired unless otherwise noted. If mechanical or other working parts are inoperable, even if working at the time of sale, CTFA is not liable due to the inherent nature of the age of these used items. CTFA will not be responsible for shipping costs, after auction appraisal fees, testing or any other post auction costs. This limited guarantee DOES NOT APPLY to any ammunition whatsoever. All Ammunition will be sold "as-is" (see below) AS-IS: Auction lots and items offered with the designation "AS-IS", "Poor condition",or "For parts or restoration" are offered without guarantee, all sales are final and sold without refund or buyer recourse. POST SALE RETURN AND REFUND POLICY: If a major description or condition discrepancy is discovered within 28 calendar days of the auction, a buyer may submit a request in writing for a full refund under the following conditions: The request for refund must be received in writing before the end of the 28th day. The auction lot in question must be received by CTFA within 3 days of the request for return and refund. After receipt of the lot in question, CTFA will perform an evaluation, and determine the validity of the request. If a return and refund is granted, CTFA will notify the buyer within 7 calendar days of receipt. CTFA does not offer adjustments or partial refunds. Refunds are only given for the total hammer price, and restocking fees up to the total amount of buyers premium may apply. Accepted refunds are paid only by paper check, and submitted to the buyer 30 days after receipt of items. FIREARMS TRANSFER AND ELIGIBILITY: All firearm transfers will be in strict accordance with all International, Federal, State and local laws. Buyer is responsible for adhering to all country, state and local laws before bidding. If a bidder is unable to import, purchase, own, or receive a firearm for any reason, they should not bid on these items. If a buyer later determines they cannot legally own a firearm or accept delivery, the bid is still a valid contract, and the buyer is still obligated to remit payment in accordance with payment terms. CTFA does not offer returns, refunds or cancellations on the basis of ineligibility or failure to facilitate transfer. BUYER OF RECORD: All firearms must transfer to the registered buyer on record. CTFA will not modify, or re-invoice any firearms for another party. DENIAL OF TRANSFER: If "Denied" by FBI / NICS background check buyers will not be able to take possession of the firearm and the firearm will be consigned to the next available firearm auction. Dealers and Individuals that bid on and win items own the items and are fully responsible for payment within terms regardless of whether the FBI / NICS approves their taking physical possession of the items. CTFA will not cancel the sale due to disapproval for any reason. If a buyer is appealing a "Denied" decision, we will hold the firearm for a grace period of 30 days, with monthly storage fees in effect on the 31st day. IN-PERSON PAYMENT AND PICKUP: Only the person to whom the bidder number is registered may accept transfer of the firearm(s) at the conclusion of the sale - Federal Law disallows anyone else from accepting the transfer. Buyers may not bid on or pay for modern firearms on behalf of another party. Modern Firearms (1898 and later) Can be picked up in person with a valid CT Pistol Permit or applicable Certificate Can be picked up by FFL Licensee or listed responsible person with "Live Copy" of License Eligible Curio & Relic Firearms can be picked by by C&R Holders with "Live Copy" of license. Non Connecticut Residents (without FFL or C&R) may not pick up modern or NFA firearms in person at our CT Facility. Antique Firearms Can be picked up in person with valid photo ID by persons over the age of 18. No background check required, all states of residence eligible. Non-Guns may be picked up by any eligible buyer (or buyers agent) with a valid photo ID. Ammunition: Any buyer receiving ammunition in the State of CT must possess a Valid CT Pistol Permit, Long Gun Certificate, or Ammunition Certificate per state laws. SHIPPING: Shipping and transportation costs are the responsibility of the buyer. Unless otherwise noted, all items shipped in-house, and will be billed on your invoice. Modern firearms are legally required to be shipped to a BATF licensed FFL business within their state of residence for transfer. For states that allow shipment of C&R firearms to the C&R license holder, CTFA reserves the right to ship those C&R firearms to the address listed on C&R license. Modern handguns only ship via UPS 2-Day Air or U.S.P.S. Priority Mail. Modern long guns are shipped via UPS ground. IT IS THE BUYERS RESPONSIBILITY TO CONTACT THEIR RECEIVING FFL AND ARRANGE TRANSFER AND FFL REMITTANCE. The receiving dealer must submit a current copy of their FFL for each auction invoice. FFL's are not kept on file. FFL's should be submitted to sales@ctfirearmsauction.com or through our website here: https://ctfirearmsauction.com/submit-your-ffl/ FEES: Standard Hand Guns ship for $40. Standard long guns ship for $55. Oversize shipping charges will apply to guns over 45" Overall Length. Additional fees apply for shipping addresses outside the Continental United States. DISASSEMBLY: Firearms, auction items, and accessories may be disassembled for shipping. This may include scopes, cases, barrels, and stocks. ADDRESS: CTFA is not responsible for incorrect shipping addresses. Buyers must verify the shipping address listed on their invoice prior to shipment. Standard items packed internally by CTFA will ship approximately one to fourteen business days after payment AND applicable paperwork (FFL) is received. INSURANCE: All firearms in transit are insured at no additional cost up to $2,500 per shipment. Packages valued over $2,500 require insurance at a rate of 1% per invoiced dollar unless the buyer declines in writing 48 hours prior to package shipment. OVERSIZE: Certain auction items exceed standard shipping fees and may require oversized and heavy shipping surcharges. Every effort is made to note these charges prior to catalog publication, but may be included on a buyers invoice post auction without notice. AMMUNITION: Ammunition does not ship with an associated gun. Separate charges apply for ammunition shipments, and may require heavy or oversize charges. INTERNATIONAL: CTFA welcomes international buyers. CTFA can provide, upon request, recommended firearms exporters and international shippers. It shall be the potential buyer's sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property and for paying all shipping costs, customs and duties on the items. By law, CTFA cannot, and will not, declare lesser values for any international purchases and all shipments will include the invoice with purchase totals including the buyer's premium and shipping cost. CTFA does not offer in-house international shipping (or export) any firearms, ammunition, or weapons REGARDLESS OF AGE OR STATUS OF THE LOT. All international shipping must be performed by a licensed exporter or third party shipper. CTFA does offer domestic shipping to the exporter of the buyer's choice. Buyer is responsible for contacting and employing the exporter. Exporter FFL documents must be sent to sales@ctfirearmsauction.com prior to domestic shipment. CTFA strongly recommends making contact with an exporter prior to bidding for pricing, process and timeline information. GOODS MADE FROM OR CONTAINING MATERIALS FROM PROTECTED SPECIES: CTFA does not accept any responsibility or liability for the sale of items containing materials from protected species or for any omission in marking or labeling goods as containing materials from protected species. Such material includes, but is not limited to, ivory from elephants and walruses, tortoise shell, crocodile skin, whalebone, rhinoceros horn, some species of coral and certain woods. Restrictions on the importation, exportation, sale, transfer, and/or possession of goods containing materials from protected species derive from international, federal, and state laws and regulations promulgated thereunder. Laws include, but are not limited to, the Convention on International Trade in Endangered Species of Flora and Fauna (CITES), the Endangered Species Act (ESA) and the Marine Mammals Protection Act (MMPA). States currently restricting trade of protected species include, but are not limited to, California, New York and New Jersey. Prospective buyers are on notice that several countries completely prohibit importation of property made, all or in part, of protected materials. Some countries require special permits, such as a CITES permit, from the relevant regulating authority in the countries of exportation and importation as well. Potential buyers intending to import the property into another country should be familiar with the relevant customs laws and regulations prior to bidding on goods containing material from protected species. Regulations may vary as the U.S. generally prohibits importation of articles containing material(s) from species it has designated endangered or threatened if the articles are less than 100 years old, subject to certain exceptions. It shall be the potential buyer's sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property as described in the aforementioned paragraphs. All buyers agree to comply with any and all domestic and international restrictions on the trade of protected species as a condition of the sale. Please note that the ability to obtain an export license or certificate does not ensure the ability to obtain an import license or certificate in another country, and vice versa. It is the buyer's responsibility to obtain any export or import licenses and/or certificates as well as any other required documentation. CTFA is not able to assist the buyer in attempting to obtain the appropriate licenses and/or certificates, and there is no assurance that an export license or certificate can be obtained. The inability or delay in obtaining permits, licenses or other permissions to import or export goods containing material from protected species will not constitute a basis for rescission or cancellation of the sale of said goods or the delay in payment of purchased items in accordance with these Bidder Terms and Conditions. BIDDING TERMS: The auctioneer will determine the highest bidder. The auctioneer alone has the right to reopen the bidding of an item at any time if deemed necessary due to a dispute. If there is a tie bid between the floor and Internet or absentee bid, the floor bid takes precedence. In the event of a tie internet bid, the auctioneer will choose the highest bidder. CTFA and its representatives reserve the right to remove those attendees who impede preview and/or the auction. CTFA is not responsible for any errors in bids, omissions of bids, or failure to execute bids and shall have no liability to any bidder for any technical or other failure associated with internet, absentee bidding, or telephone bidding. In the event of an on-site utilities or internet services interruption, the auction will be suspended until such a time that the utility can be restored. Consignors are not allowed to bid on their own merchandise nor have any agent bid on their behalf. If the Auctioneer recognizes such bidding, the Auctioneer reserves the right to withdraw any or all items consigned by the offending consignor. ABSENTEE BIDDING: CTFA will accept absentee bids if pre-authorized by mail, phone, email, online, or in-person. In-Person absentee bidders must use the absentee bid form and clearly mark the lot number, title and maximum bid amount. If there are two (2) identical bids placed on the same item, priority will be given to the first bid received. All bids must be left in increments as published for that particular auction. If a bid is "out of increment," the auctioneer will automatically round the bid down to the next correct increment. Seller(s) agree to allow the Auctioneer to accept and execute absentee bids in a competitive manner for potential buyers and under the CTFA absentee bidding terms and conditions. During the live sale, the auctioneer will execute absentee bids competitively (starting with the lowest possible bid point) up to the maximum amount indicated. ONLINE BIDDING: Online bidding through www.CTfirearmsauction.com, Live Auctioneers, Invaluable, Hibid, Proxibid, or other bidding platforms may be available. These terms and conditions apply, as well as additional terms and conditions for each third-party platform. These Terms & Conditions will take deference over any posted online terms and agreements. A surcharge may be added for third party online platforms. Refer to the bidding platform of choice for the final buyer's premium. If there is a tie bid between the internet bidding venues and the floor, the floor bid takes precedence. Due to our fast paced auctions and bids coming from floor bidders, phone bidders, Internet bidders and absentee bids, the auctioneer has the final word on all item(s) sold. The bidder assumes the risk of winning an item online and discovering the item has sold to another bidder. This is due to the final call of the auctioneer and the operator not being able to re-open that lot. Registered Online bidders are fully responsible for accidental bidding as if they bid normally. BID RESULTS: CTFA will only contact successful bidders. Invoices are sent within 24 hours of auction end. The invoice will include the lot info, hammer price, premium, shipping, insurance, and any other charges that apply. Please hold phone inquiries regarding bid success until after receiving the invoice. For verifications, CTFA cannot provide winning bid information until the second business day after the auction. CTFA will not provide bidder information to any outside sources. TELEPHONE BIDDING: Requests for phone lines must be received at least three (3) days prior to the auction date. CTFA cannot guarantee phone lines but will make every attempt to accommodate those who wish to participate live via phones. Phone lines are provided to qualified bidders at CTFA's preference. Please contact us directly to arrange phone bidding.203-710-0189. Minimum bid requirements may apply. BIDDERS PRESENT AND TAKING ITEMS DURING AND AFTER AUCTION: Since item liability transfers upon a successful bid, items paid for must be packed, transported and/or removed by the buyer at his/ her own risk after the close of the sale. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. If any employee or agent of CTFA shall pack or transport the merchandise, it is fully at the risk and responsibility and expense of the buyer. CTFA shall not be held liable for any loss or damage that may be caused by the said agent or employee. RESERVES: The majority of our items are unreserved, but occasionally items may carry a moderate reserve. Please note that when a lot carries a reserve, the reserve is at or below the low estimate. In the case of a reserved item, the seller has authorized the auctioneer to bid on their behalf until the reserve price is reached. The auctioneer will note if a buyer is bidding against the reserve. PAYMENT TERMS: CTFA accepts Visa, MasterCard, Discover, American Express, personal checks, certified checks, wire transfers, money orders, and cash. Any invoice totaling more than $50,000 must be paid within three (3) business days of the auction date. All other merchandise must be paid in full within seven (7) days of the date of the invoice.Upon payment in full, it is the bidder's responsibility to submit any additional information necessary, including an FFL, to initiate transfer and shipping. Invoices over $5,000 may be subject to mandatory check or wire payment. All transaction fees associated with payment method are non-refundable. All goods not retrieved by buyer within 30 days after the invoice date, shall be subject to a storage fee of $50 per item per month. Buyer authorizes CTFA to sell, at their standard commission and consignment contract terms, any goods not retrieved after a 90 day period in any manner deemed appropriate by CTFA and the proceeds will be applied to any outstanding balance due from the buyer. CREDIT CARDS: Link for online credit card payment will be listed in the buyers invoice. Credit Card payments are subject to maximum buyers premium, and can be discounted by 3% if payment is received by cash, check, money order or wire transfer. Credit Card payments are only accepted from the buyers name listed on the invoice. CTFA reserves the right to refuse to ship to a different address than the billing address on the credit card being used. CTFA does not allow credit card chargebacks for any reason and any delivered firearms subject to a chargeback will be considered as a stolen gun and reported immediately to Law Enforcement. Credit cards information is not stored and payment for invoices is the buyers responsibility. We do not use third party billing services and the buyers credit card will not be automatically charged. CHECK: There will be a $40.00 service charge for returned checks. Make checks payable to: CT Firearms Auction LLC. Checks can be mailed to: CT Firearms Auction LLC 8 Metals Drive, Plantsville CT 06479. CTFA reserves the right to hold items paid for by personal or company check until said check clears (14 days). CTFA has the right to hold all checks over $2,000. Customers who have an established successful buying history with CTFA may be exempt from this requirement. First time buyers paying by check may be subject to additional requirements such as bank letter of credit. WIRE TRANSFERS: Wire transfers are accepted for invoices totaling more than $5,000 USD. Invoices below $5,000 may be subject to a $30 transaction fee. NON-PAYMENT: In the few situations where a successful bidder does not remit payment when due, CTFA will proceed with the legal steps necessary to protect its interests and will block the bidder from future auction participation. SALES TAX: CTFA is required to collect sales tax where applicable. It is the bidder's responsibility to know the sales and use tax law in their locality and know what sales and use tax will be due upon their purchase. Lots are subject to all applicable state and local taxes, unless appropriate resale permits are on file with CTFA prior to invoicing. Bidder agrees to pay CTFA the actual amount of tax due in the event that sales tax is not properly collected due to: 1) an expired, inaccurate, or inappropriate tax certificate or declaration, 2) an incorrect interpretation of the applicable statute, 3) or any other reason. The appropriate form or certificate must be on file and verified by CTFA five days prior to Auction, or tax must be paid; only if such form or certificate is received by CTFA within 4 days after the Auction can a refund of tax paid be made. Lots from different auctions may not be aggregated for sales tax purposes. NFA TRANSFERS: National Firearms Act Weapons and Destructive Devices (DD) Processing to Dealers: Buyer must provide CTFA with a copy of their receiving dealers active FFL and their SOT. Estimated time for processing and approval of the required Form 3 can take 3 days to 3 months, dealer to dealer via E-File is usually less than a week. Individuals IN CT: Law requires a completed Form 4, or Form 5 for deactivated guns. CTFA will prepare and sign the front of the applicable transfer form, and send to the individual buyer or meet with them directly. Individuals are responsible for completing requirements for fingerprints and photo, as well as completing applicable portions of the reverse side of the form. Estimated time for processing and approval of Form 4 is 6-12+ months.Dealers and Individuals that bid on and win NFA or DD items own the items and are fully responsible for payment within terms regardless of whether the BATF approves their taking physical possession of the items. CTFA will not cancel the sale due to BATF disapproval for any reason. SAFETY: Since all firearms sold are "collectible" items, CTFA does not test the safety or warrant functionality of these firearms. All firearm purchases should be examined by a certified gunsmith prior to shooting. DENIAL OF SALE: CTFA reserves the right to deny the sale of a firearm to any buyer, for any reason, at any time in the sales process. WITHDRAWAL OF PROPERTY: CTFA reserves the right to withdraw any property from the auction at any time and shall have no liability whatsoever for such withdrawal. DEFINITIONS: CURIO & RELIC (C&R): Per BATF: To be recognized as C&R items, 478.11 specifies that firearms must fall within one of the following categories: Firearms which were manufactured at least 50 years prior to the current date, but not including replicas of such firearms; Firearms which are certified by the curator of a municipal, State, or Federal museum which exhibits firearms to be curios or relics of museum interest; and Any other firearms which derive a substantial part of their monetary value from the fact that they are novel, rare, bizarre, or because of their association with some historical figure, period, or event. Firearms automatically attain C&R status when they are 50 years old. Any firearm that is at least 50 years old, and in its original configuration, would qualify as a C&R firearm. It is not necessary for such firearms to be listed in ATF's C&R list. ANTIQUE FIREARMS: Per BATF: The term "antique firearm" means- any firearm (including any firearm with a matchlock, flintlock, percussion cap, or similar type of ignition system) manufactured in or before 1898; or any replica of any firearm described in subparagraph (A) if such replica- is not designed or redesigned for using rimfire or conventional centerfire fixed ammunition, or uses rimfire or conventional centerfire fixed ammunition which is no longer manufactured in the United States and which is not readily available in the ordinary channels of commercial trade; or any muzzle loading rifle, muzzle loading shotgun, or muzzle loading pistol, which is designed to use black powder, or a black powder substitute, and which cannot use fixed ammunition. For purposes of this subparagraph, the term "antique firearm" shall not include any weapon which incorporates a firearm frame or receiver, any firearm which is converted into a muzzle loading weapon, or any muzzle loading weapon which can be readily converted to fire fixed ammunition by replacing the barrel, bolt, breechblock, or any combination thereof." FFL: Federal Firearms Licensee with a current and valid license to be a firearms Dealer / Manufacturer / Importer CURIO & RELIC HOLDER: FFL type 03 or C&R license or Collector NFA (National Firearms Act of 1934) Weapons (commonly called "Class 3"): A shotgun having a barrel or barrels of less than 18 inches in length; A weapon made from a shotgun if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 18 inches in length; A rifle having a barrel or barrels of less than 16 inches in length; A weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length; Any other weapon, as defined in subsection (e); A machine gun; Any silencer (as defined in section 921 of title 18, United States Code); and A destructive device. DESTRUCTIVE DEVICES: A missile having an explosive or incendiary charge of more than 1/4 oz. Any type of weapon by whatever name known which will, or which may readily be converted to expel a projectile, by the action of an explosive or other propellant, the barrel or barrels of which have a bore greater than one-half inch in diameter. A combination of parts designed and intended for use in converting a device into a destructive device and from which a destructive device can be readily assembled. MODERN FIREARMS: Any firearm that does not already classify as a C&R, NFA Weapon or Antique and is under the purview of the Gun Control Act of 1968.
PLEASE NOTE NEW START TIME! September 2024 Online-Only Firearms Auction Friday September 20th at 1:00 PM EST. Pre-bidding, Live-Online, Absentee bids, together with Simulcast Auction with Live Stream. MIlitary Surplus, Shotguns, Revolvers, Pistols, Antiques, Black Powder, Modern Semi-Automatic Rifles and hand guns.

1
Astra A-100 .40 S&W Semi Auto Pistol
Description Astra model A-100 imported by E.A.A. Cocoa FL, chambered in .40 S&W with a 3.5" barrel. Features stainless steel frame with partly polished slide. Black plastic grips, serrated hammer, serrated magazine release, and untextured trigger. Le...

2
Auto Ordnance USAF Commemorative 1911A1 .45 Pistol
Description Auto Ordnance American Historical Foundation United States Air Force Commemorative Limited Edition 1911A1 in .45 ACP with one, seven round removable magazine and a 5" barrel. Composite grip plates with inlaid United States Air Force medal...

3
Beretta 950BS .22 Short Semi Auto Pistol
Description Beretta 950BS chambered in .22 Short with one, six round removable magazine and a 2.5" tip up barrel. Black finished alloy frame with checkered polymer grips with push button magazine release. Single action trigger and hammer with frame m...

4
Beretta 87BB .22 LR Semi Auto Pistol 2001
Description Beretta 87BB chambered in .22 long rifle with two, ten round removable magazine and a 3.5" barrel. Manufactured in 2000 with AS date code. Black finished alloy frame with checkered wood PB grips. Textured push button magazine release and ...

5
Beretta 950BS .25 ACP Semi Auto Pistol
Description Beretta 950BS chambered in .25 ACP with one, eight round removable magazine and a 2.375" tip up barrel. Black finished alloy frame with checkered polymer Beretta grips with push button magazine release. Single action trigger and hammer wi...

6
Beretta 21A "BobCat" .22 LR Semi Auto Pistol
Description Beretta 21A BobCat chambered in .22 long rifle with one, seven round removable magazine and a 2.5" tip up barrel. Black finished alloy frame with wood Beretta grips. Serrated push button magazine release and tip up barrel release. Double/...

7
Beretta BU9 Nano 9mm Semi Auto Pistol
Description Beretta BU9 Nano chambered in 9mm with one, eight round removable magazine, one, seven round removable magazine, and a 3.07" barrel. Black polymer frame with textured front and backstrap. Polymer trigger with trigger safety. Black serrate...

8
Beretta 950BS Minx .22 Short Semi Auto Pistol
Description Beretta Model 950-BS Minx in .22 Short with one, six round removable magazine and a 2.5" tip up barrel. Checkered black composite grip plates. Blued trigger guard, solid trigger, hammer, serrated slide and barrel. Lower left side of frame...

9
Boberg Arms XR45-S .45 ACP Bullpup Pistol
Description Boberg Arms XR45-S chambered in .45 ACP with two, six round removable magazines and a 3.75" barrel. Recoil operated semi automatic bullpup pistol with textured black polymer grips on a black aluminum alloy frame. Double action only trig...

10
Norarmco Budischowsky TP-70 .25 ACP Semi Pistol
Description Norarmco Budischowsky TP-70 in .25 ACP with one, six round removable magazine and a 2.5" barrel. Checkered black composite grip plates. Stainless steel frame, serrated trigger, serrated hammer and serrated slide. Magwell located serrated ...

12
Glock 23 Gen 3 .40 S&W Semi Auto Pistol
Description Third Generation Glock 23 chambered in .40 Smith & Wesson with one, thirteen round removable magazine and a 4.02" barrel. Textured polymer compact frame with finger grooves and under barrel accessories rail. Serrated magazine and slide ca...

13
HK P30 V3 .40 S&W Semi Auto Pistol
Description Heckler & Koch P30 V3 chambered in .40 Smith & Wesson with two, ten round removable magazines and a 3.9" cold hammer forged barrel. Polymer frame with replaceable back straps, lateral grip plates, textured finger grooves, and picatinny r...

14
Estate Pistol Lot 2 Pcs Pistols
Description Estate Pistol lot with two pieces. Intratec Cat 9 in 9mm with one, seven round removable magazine and a 3" barrel. Textured composite grip on frame. Blued serrated metal slide. Notch fixed sight. Comes in its factory box with matching wri...

15
High Standard The Victor .22 LR Semi Auto Pistol
Description High Standard The Victor in .22 Long Rifle with one, ten round removable magazine and a 5.5" top ribbed heavy Bull barrel. Made in Hamden Connecticut. Checkered contoured wood grip plates. Blued frame, serrated slide and barrel. Serrated ...

16
High Standard Supermatic Citation .22 LR Pistol
Description High Standard Supermatic Citation in .22 Long Rifle with one, ten round removable magazine and a 7.25" fluted barrel. Made in Hamden Connecticut. Checkered wood grip plates with left side thumb contour. Blued frame, serrated slide and bar...

17
High Standard Supermatic Tournament .22 LR Pistol
Description High Standard Model 106 Military Supermatic Tournament in .22 Long Rifle with one, ten round removable magazine and a 6.75" barrel. Checkered wood grip plates. Blued frame, serrated slide and barrel. Case colored magazine release and serr...

18
Estate Derringer 3 Pcs Lot Pistols
Description Estate Derringer lot with three pieces. Two High Standard Derringers in .22 Magnum with a two round capacity and a 3.5" over under barrel. Made in East Hartford Connecticut. One with black composite grip plates and the other missing the g...

19
High Standard Supermatic Citation .22 LR Pistol
Description High Standard Supermatic Citation in .22 Long Rifle with one, ten round removable magazine and a 5.5" heavy Bull barrel. Made in Hamden Connecticut. Checkered contoured wood grip plates. Blued frame, serrated slide and barrel. Case colore...

21
Indian Arms Corp. Automatic .380 ACP Pistol
Description Indian Arms Corp. Model Automatic .380 chambered in .380 ACP with a 3.25" barrel and a 6 round removable magazine. Features stainless steel construction with checkered hardwood grips with company medallions. Serrated slide with safety/dec...

22
Kahr P-45 .45 ACP Semi Auto Pistol
Description Kahr Arms model P-45 chambered in .45 ACP with two, six round removable magazines and a 3.54" barrel. Black polymer frame with after market custom stippling on the grip. Serrated push button magazine release and stainless slide release. S...

23
KelTec P11 9mm Semi Auto Pistol
Description Kel-Tec P11chambered in 9mm with two, ten round removable magazines and a 3.1" barrel. Black polymer frame with textured grips. Double action only trigger with internal hammer and transfer bar safety. Stainless serrated slide with white t...

24
IMI Magnum Research Desert Eagle 9mm Pistol
Description Israel Military Industries Desert Eagle Pistol chambered in 9mm with a 3.5" barrel. Manufactured in Israel by IMI and imported by Magnum Research, Marked on the right side of the frame. Matte stainless steel frame with textured polymer gr...

25
Remington XP-100 .35 Rem Bolt Action Pistol
Description Remington XP-100 in .35 Remington with a single round capacity and a 15" barrel. Checkered composite grip on frame. Black composite trigger guard. Serrated blued trigger, bolt and barrel. Rear receiver serrated safety switch. Bottom and f...

26
S&W M&P 9C 9mm Semi Auto Pistol
Description Smith & Wesson M&P 9c chambered in 9mm with two, ten round removable magazines and a 3.5" barrel. Textured grip on composite frame with removable backstrap plates. Composite untextured trigger. Blued serrated metal slide and barrel. Lower...

27
Smith & Wesson M&P45 Compact .45 Semi Auto Pistol
Description Smith & Wesson M&P45 Compact chambered in .45 ACP with two, eight round removable magazines and a 4" barrel. Textured polymer frame with interchangeable backstrap/palm swell and under barrel accessories rai. Single action striker fired po...

28
Smith & Wesson M&P 22 .22LR Semi Auto Pistol
Description Smith & Wesson M&P 22 chambered in .22 long rifle with six, ten round removable magazines and a 4.1" threaded barrel. Textured polymer frame with picatinny under barrel accessories rail. Striker fired polymer trigger with trigger safety. ...

29
S&W 41 .22 Long Rifle Semi Auto Pistol
Description Smith & Wesson 41 chambered in .22 long rifle with two, ten round removable magazines and a 7" barrel. Blued steel frame with serrated front strap and checkered wood wrap around grips. Serrated trigger and slide release. Checkered push b...

30
Smith & Wesson 39-2 9mm Semi Auto Pistol
Description Smith & Wesson Model 39-2 in 9mm with one, eight round removable magazine and a 4" barrel. Smooth wood grip plates. Nickel finished frame and serrated slide. Blued trigger and serrated hammer. Magwell located lanyard loop. Lower left side...

31
Smith & Wesson 6904 9mm Semi Auto Pistol
Description Smith & Wesson Model 6904 in 9mm with one, twelve round removable magazine and a 3.5" barrel. Black checkered composite Xenoy wrap around grip plate. Blued frame, trigger, bobbed hammer and serrated slide. Lower left side of frame checker...

32
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

33
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

34
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

35
Smith & Wesson M&P 9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

36
Smith & Wesson M&P 9 Shield 9mm Semi Auto Pistol
Description Smith & Wesson M&P 9 Shield chambered in 9mm with one, eight round magazine, one, seven round magazine, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated slide sto...

37
Smith & Wesson M&P9 Shield NYPD 9mm Pistol
Description Smith & Wesson M&P 9 Shield NYPD chambered in 9mm with one, eight round magazine, two, seven round magazines, and a 3.125" barrel. Textured polymer frame with embedded stainless steel chassis. Push button magazine release and serrated sli...

38
Sig Sauer P250SC 9mm Semi Auto Pistol
Description Sig Sauer P250SC chambered in 9mm with one, ten round removable magazine and a 3.9" barrel. Polymer Sub Compact frame with textured grip. Serrated push button magazine release and ambidextrous slide release. Double action only trigger wit...

39
German Sig Sauer P230SL .380 ACP Semi Auto Pistol
Description Sig Sauer P230SL chambered in .380 ACP with two, seven round removable magazines and a 3.5" barrel. Manufactured in Germany in 1993 (KD) by Sig Sauer and imported by Sig Arms, marked on the slide. Matte stainless steel frame with heel mag...

40
Sig Sauer P232 .380 ACP Semi Auto Pistol
Description Sig Sauer Model P232 in .380 ACP (9mm Kurz) with one, seven round removable magazine and a 3.5" barrel. Made in Germany. Textured composite grip plates. Blued frame, trigger, hammer and serrated slide. Magwell located serrated magazine re...

41
Sig Sauer P229 9mm Semi Auto Pistol Germany
Description Sig Sauer P229 chambered in 9mm with two, ten round removable magazines and a 3.8" barrel. Manufactured in Germany by Sig Sauer and imported by Sig Arms NH, marked on the right side of the frame, and left side of the slide. Black finished...

42
Springfield Armory XDm-9 9mm Semi Auto Pistol
Description Springfield Armory XDm-9 chambered in 9mm with three, nineteen round removable magazine and a 5.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger with ...

43
Springfield Armory XDm-9 Stainless 9mm Pistol
Description Springfield Armory XDm-9 chambered in 9mm with three, nineteen round removable magazine and a 4.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger with ...

44
Springfield Armory XD-45 .45 ACP Semi Auto Pistol
Description Springfield Armory XD-45 chambered in .45 ACP with three, thirteen round removable magazines and a 4.25" barrel. Textured polymer frame with under barrel accessories rail. Polymer striker fired trigger with trigger safety and grip safety....

45
Springfield XD-45 Sub Compact Mod 2 .45 Pistol
Description Springfield Armory XD-45 Sub Compact Mod 2 chambered in .45 ACP with one, twelve round magazine, one, nine round magazine, and a 3.3" barrel. Textured polymer frame with under barrel accessories rail and grip safety. Single action striker...

46
Springfield Armory XDS-45 .45 ACP Semi Auto Pistol
Description Springfield Armory XDS-45 in .45 ACP with two varied capacity removable magazines and a 3.25" barrel. Textured black composite grip on frame. Serrated composite trigger. Blued serrated metal slide and barrel. Ambidextrous magazine release...

47
Springfield Armory XDS-9 9mm Semi Auto Pistol
Description Springfield Armory XDS-9 in 9mm with three varied capacity magazines and a 3.25" barrel. Made in Croatia. Textured black composite grip on frame. Serrated composite trigger. Blued serrated metal slide and barrel. Ambidextrous magazine rel...

48
Springfield Armory XDM-45 .45 ACP Semi Auto Pistol
Description Springfield Armory XDM-45 chambered on .45 ACP with six, thirteen round removable magazines and a 5.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger w...

49
Springfield Armory XDM-40 .40 S&W Semi Auto Pistol
Description Springfield Armory XDM-40 chambered in .40 Smith & Wesson with seven, sixteen round removable magazines and a 5.25" match barrel. Black polymer frame with aftermarket grip tape texturing and a under barrel accessories rail. Striker fired ...

50
Springfield Armory XDm-9 9mm Semi Auto Pistol
Description Springfield Armory XDM-9 chambered in 9mm with three, nineteen round removable magazine and a 5.25" match barrel. Textured polymer frame with interchangeable backstrap and under barrel accessories rail. Polymer striker fired trigger with ...

51
Taurus .380 ACP Lot 2Pcs 738, Curve Pistol
Description This lot is for two Taurus pistols chambered in .380 ACP, first is a model 738 TCP with two, six round magazines and a 3.3" barrel. Textured polymer frame with polymer trigger and internal hammer. Stainless steel serrated slide with fixed...

53
Thompson Center Contender .35 Rem Pistol 2Pc Lot
Description This lot is for two Thompson Center Contenders both chambered in .35 Remington with single shot capacities and Super 14" barrels. Both have blued finishes with break action levers and single action triggers/hammers. One pistol has a wood ...

55
Walther P99 9mm Semi Auto Pistol
Description Walther P99 chambered in 9mm with two, fifteen round removable magazines, two, ten round magazines, and a 4" barrel. Manufactured in Germany in 2003 by Walther and imported by Smith & Wesson, marked on the right side of the slide. Militar...

56
Walther P22 .22 LR Semi Auto Pistol
Description Walther P22 chambered in .22 long rifle with two, ten round removable magazines and a 5" barrel with barrel weight. Textured polymer frame with under barrel accessories rail. Ambidextrous paddle magazine release. Double/single action trig...

57
Casull Arms CA 2000 .22 LR Revolver
Description Casull Arms CA 2000 chambered in .22 long rifle with a five shot cylinder and a 1 3/4" barrel. Matte stainless steel barrel and frame. Polished stainless unfluted cylinder. Double action only folding trigger with internal hammer. Frame mo...

58
Heritage Rough Rider .22 LR Revolver
Description Heritage Rough Rider chambered in .22 long rifle with a six-shot cylinder and a 4 3/4" barrel. Black oxide finished alloy steel cylinder, alloy steel barrel, and zinc alloy frame. Single action trigger and hammer with manual safety. Cocob...

59
North American Arms NAA-22LR .22LR Revolver
Description North American Arms NAA-22LR chambered in .22 Long Rifle with a five-shot cylinder and a 1.13" barrel. Stainless steel barrel, frame, and fluted cylinder. Single action trigger and hammer. Rosewood birds head grips. Rear notch and half mo...

60
NAA Companion Cap and Ball .22 Percussion Revolver
Description North American Arms NAA-22LR-CB Companion chambered in .22 caliber/ #11 percussion with a five shot cylinder with nipples and a 1 1/8" barrel. Stainless steel barrel, frame, and cylinder. Single action trigger and hammer. Smooth wood bird...

61
Ruger New Model Single Six .22 LR/Mag Revolver
Description Ruger New Model Single Six in .22 Long Rifle or Magnum with a six round capacity and a 6.5" barrel. Smooth wood grip plates. Polished stainless steel trigger guard, trigger, frame, cylinder and barrel. Right side of frame loading gate. Un...

62
Ruger New Model Super Blackhawk .44 Mag Revolver
Description Ruger New Model Super Blackhawk in .44 Magnum with a six round capacity and a 7.5" barrel. Hogue dimpled black rubber grip. Blued trigger guard, trigger, frame, serrated hammer and barrel. Right side of frame loading gate. Under barrel cy...

63
Ruger LC9 9mm Semi Auto Pistol
Description Ruger LC9 chambered in 9mm with one, seven round magazine and a 3.12" barrel. Manufactured in 2014 with serial number 326-33525. Polymer frame with textured grip. Blued metal trigger with bobbed hammer. Frame mounted manual thumb safety a...

64
Smith & Wesson 36 Chiefs Special .38 Spl Revolver
Description Smith & Wesson Model 36 Chiefs Special in .38 S&W Special with a five round capacity and a 2" barrel. Checkered wood grip plates. Blued frame, cylinder and barrel. Case colored serrated Service trigger and checkered hammer. Left side of f...

65
Smith & Wesson 64-3 .38 Spl Revolver
Description Smith & Wesson Model 64-3 in .38 Special with a six round capacity and a 4" barrel. Checkered Pachmayr black rubber wrap around grip. Polished stainless steel frame, cylinder and barrel. Untextured trigger and checkered hammer. Left side ...

66
Smith & Wesson 64-3 .38 Spl Revolver
Description Smith & Wesson Model 64-3 in .38 Special with a six round capacity and a 4" barrel. Checkered wood grip plates with removable composite spacer. Polished stainless steel frame, cylinder and barrel. Untextured trigger and checkered hammer. ...

67
Smith & Wesson 17 .22 LR Revolver
Description Smith & Wesson Model 17 K-22 Masterpiece in .22 Long Rifle with a 6" barrel. Checkered Goncalo Alves wood grip plates. Blued frame, cylinder and barrel. Case colored Target trigger and checkered Target hammer. Left side of frame checkere...

68
Smith & Wesson 19-3 .357 Mag Revolver
Description Smith & Wesson 19-3 in .357 Magnum with a six round capacity and a 4" barrel. Checkered Goncalo Alves wood grip plates. Blued frame, cylinder and barrel. Case colored serrated trigger and checkered hammer. Left side of frame checkered cy...

69
Smith & Wesson 48-3 .22 MRF Revolver
Description Smith & Wesson Model 48-3 in .22 Magnum Rimfire with a six round capacity and a 4" barrel. Checkered wood grip plates. Blued frame, cylinder and barrel. Case colored serrated trigger and checkered hammer. Left side of frame checkered cyli...

70
Smith & Wesson 36 Chiefs Special .38 Spl Revolver
Description Smith & Wesson Model 36 Chiefs Special in .38 S&W Special with a five round capacity and a 2" barrel. Checkered wood grip plates. Blued frame, cylinder and barrel. Case colored serrated Service trigger and checkered hammer. Left side of f...

71
Smith & Wesson 19-3 .357 Mag Revolver
Description Smith and Wesson model 19-3 chambered in .357 Magnum with a 4" barrel and a 6 round fluted cylinder. Features oversized walnut target grips with S&W medallion, knurled full target hammer with case blue, serrated trigger with case blue, fa...

72
Smith & Wesson 38 Bodyguard Airweight Revolver
Description Smith and Wesson Model 38 chambered .38 Special with a 2" barrel and a 5 round capacity fluted cylinder. Features a blued finish alloy frame with hammer shroud, case blue serrated hammer, smooth face case blue trigger, steel fluted cylind...

73
Smith & Wesson 66-4 .357 Mag Revolver
Description Smith & Wesson Model 66-4 in .357 Magnum with a six round capacity and a 4" barrel. Checkered rubber grip plates. Polished stainless steel frame, cylinder and barrel. Case colored untextured trigger and checkered hammer. Left side of fram...

74
Smith & Wesson 686-3 .357 Mag Revolver
Description Smith & Wesson Model 686-3 Distinguished Combat Magnum in .357 Magnum with a six round capacity and a 6" barrel. Checkered Goncalo Alves wood grip plates. Polished stainless steel frame, cylinder and barrel. Untextured trigger and checker...

75
Smith & Wesson 2 Pcs Lot Revolver
Description Smith & Wesson lot with two pieces. S&W 32 Safety Hammerless in .32 ACP with a five round capacity and a 3" barrel. Checkered composite grip plates. Blued frame, cylinder and barrel. Rear notch and front fixed blade sight. S&W Model 19-2 ...

76
Smith & Wesson 59 9mm Semi Auto Pistol
Description Smith & Wesson Model 59 in 9mm with one, fourteen round removable magazine and a 4" barrel. Checkered black composite grip plates. Blued frame, trigger, serrated hammer and serrated slide. Magwell located lanyard loop. Lower left side of ...

77
Smith & Wesson 60 Stainless .38 Spl Revolver
Description Smith & Wesson Model 60 Stainless Steel Chiefs Special in .38 S&W Special with a five round capacity and a 2" barrel. Checkered wood grip plates. Polished stainless frame, cylinder and barrel. Serrated Service trigger and checkered hammer...

79
Bushmaster XM15-E2S 5.56/.223 Semi Auto Rifle
Description Bushmaster XM15-E2S chambered in .223 Remington and 5.56 NATO with a 20" 1:9 twist featureless barrel. A2 style front gas block with sling swivel and adjustable front post. A2 style rifle length polymer handguard. Flat top upper receiver ...

80
Century Arms C308 Sporter .308 Semi Auto Rifle
Description Century Arms C308 Sporter chambered in .308 Winchester/7.62x51 NATO with two, twenty round box magazines, one, five round magazine and a 18" barrel with muzzle break. Copy of a HK 91 Roller delayed blowback rifle, built by Century Arms u...

81
NEF/H&R Rifle/Shotgun Lot 2Pcs .45/70 12 Ga
Description This lot is for two single shot long guns. First is a New England Firearms Handi Rifle SB2 chambered in .45-70 Government with a 22" barrel. Blued barrel, frame, trigger, hammer, and action release. Adjustable rear sight and fixed front b...

82
Hi Point 4595 Carbine .45 ACP Semi Auto Rifle
Description UPDATE: Check Local/State Laws on Assault Weapons Bans BEFORE bidding. Hi Point 4595 Carbine chambered in .45 ACP with one, nine round removable magazine and a 17.5" barrel. Black finished barrel and metal receiver. Polymer handguard with...

83
Mossberg 500 12Ga Pump Action Pistol Grip Shotgun
Description Mossberg 500 chambered in 12 gauge for 2 3/4" and 3" shells with a seven round tubular magazine and a 21" barrel with a fixed CYL choke. Matte finished barrel, aluminum heat shield, magazine tube, drilled and tapped alloy receiver, and tr...

84
U.S. Property Mossberg 42 M-B .22 Cal Rifle
Description U.S. Property marked Mossberg 42 M-B chambered in .22 short, long, and long rifle with a 23" barrel. Patinated blued barrel, receiver, and bolt handle. The receiver is drilled and tapped with mounted scope rings. Tang mounted safety selec...

86
Remington 870 20 GA Pump Action Shotgun
Description Remington 870 chambered in 20 gauge for 2 3/4" and 3" shells with a four round tubular magazine and a 21" vented rib barrel with removable Remington MOD choke. Satin black finished barrel, magazine tube, receiver, loading gate, and trigge...

87
Remington 700 .308 Winchester Bolt Action Rifle
Description Remington 700 chambered in .308 Winchester with a five round removable magazine and a 26" barrel. Black finished barrel, receiver, and bolt. Push to fire safety. The top of the receiver is drilled and tapped with a picatinny optics rail. ...

88
Ruger American .223 Remington Bolt Action Rifle
Description Ruger American chambered in .223 Remington with one, five round removable magazine and a 20" barrel. Manufactured in 2014 with serial number 693-91370. Matte finished barrel, frame, and bolt handle. The top of the receiver is drilled and ...

89
Sig Sauer P365 X-Macro 9mm Semi Auto Pistol
Description Sig Sauer P365 X-Macro chambered in 9mm with three, seventeen round removable magazines and a 3.7" carbon steel barrel. Compact polymer frame with textured grip, interchangeable backstrap, and M1913 accessories rail with a mounted Streaml...

90
Sig Sauer P320 M18 9mm Semi Auto Pistol
Description Sig Sauer P320 M18 chambered in 9mm with three, twenty one round magazines, three seventeen round flush fit magazines, and a 3.9" carbon steel barrel. FDE polymer frame with textured grip and under barrel accessories rail. Standard curved...

91
Seecamp LWS-32 .32ACP Semi Auto Pistol
Description ***UPADTE This pistol is NOT C&R Eligible*** Milford, CT manufactured Seecamp model LWS-32 chambered in .32 ACP with a 2" barrel. Features a polished stainless steel construction, black synthetic grips, serrated slide grooves, flat faced ...

92
SCCY CPX-1 9mm Semi Auto Pistol
Description SCCY CPX-1 chambered in 9mm with two, ten round removable magazines and a 3.1" barrel. Textured polymer frame with finger grooves. Double action only trigger with ambidextrous frame mounted manual thumb safety. Stainless steel serrated sl...

93
Tikka Finnish M27 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka M27 Mosin Nagant chambered in 7.62x54r with a five round integral magazine and a 27" barrel. Manufactured in 1935 and imported by Century Arms, marked on the barrel. Front cleaning rod and bayonet lug with "popsicle stick" n...

94
New England Westinghouse M91 Finn Cap 7.62x54r
Description Finnish Capture New England Westinghouse M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 31.5" barrel with front cleaning rod. Manufactured in 1915 and imported by Century Arms C.A.I., marked on the bottom...

95
Russian Capture Mauser Werke ar 43 K98 8mm Rifle
Description Russian Capture Mauser-Werke AG code ar 43 K98 chambered in 7.92x57mm (8mm Mauser) with a five round internal magazine and a 24" barrel with bayonet lug. Manufactured in 1943 and imported by Century Arms C.A.I., marked on the right side o...

96
Tikka Finnish M91 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka made M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 30.5" heavy weight barrel barrel. Imported by CAI ST Albans, marked on the barrel. Blued finish with Tikka barrel shank and hexagon receiv...

97
Tikka Finnish M91/30 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka M91/30 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 28 3/4" barrel with cleaning rod. Manufactured in 1944 with serial number 69464. Blued barrel, bands, round low wall receiver, magazine, and...

98
Finnish M91 VKT Mosin 7.62x54R Bolt Action Rifle
Description Finnish model M91 VKT Mosin bolt action rifle chambered in 7.62x54Rmm, with a 31" barrel, and a 5 round integral magazine. Features hardwood stock with 1891 era sling swivels, brass pinned top cover, and finger splice joint. Receiver is m...

99
VKT M91 Mosin Nagant 7.62x54R Bolt Rifle
Description VKT M91 Finnish Mosin Nagant in 7.62x54mmR with a five round capacity and a 31" barrel. Import marked on the muzzle end of barrel: C.A.I. ST ALB VT. Blued metal butt plate. Smooth wood stock with finger spliced front forend. Blued trigger...

100
Tikka Finnish M91 Mosin Nagant 7.62x54r Rifle
Description Finnish Tikka M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 31.5" barrel. Manufactured in 1940 and imported by Century Arms C.A.I., marked on the barrel. Blued finish with Tikka barrel shank and hexagon ...

101
VKT Finnish M91 Mosin Nagant 7.62x54r Rifle
Description Finnish VKT M91 Mosin Nagant chambered in 7.62x54r with a five round internal magazine and a 30.5" barrel. Manufactured in 1942 and imported by Century Arms, C.A.I., marked on the side of the barrel. Blued barrel, bands, hexagonal receive...