Rock Hill Lumber - Sawmill Equipment - Culpeper, VA
Previous Page Listing ID#: 1620891

Auction Location

Culpeper, VA 22701
Auction Dates and TimesSALE IS COMPLETED
Friday Jun 21, 2024 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  2. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  3. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  4. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  5. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  6. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  7. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  2. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  3. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  4. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  5. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  6. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  7. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  8. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  9. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  10. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  11. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  12. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  13. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  14. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  15. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  16. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  17. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
  2. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
  3. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  4. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  5. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  6. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
  7. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  2. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  3. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  4. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  5. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  6. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  7. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  8. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  9. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  10. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

 
Listing Information
Post-Covid labor challenges have prompted the seller to put the business on the market. Rock Hill Lumber Business & Real Estate is for sale as a complete operation until May 15. If no legitimate offer is received by then, the equipment will be auctioned on June 21.

00
Information Lot
Accepting Consignments!!
Type of Auction: Sawmill and Rolling Stock
Highlight Pieces: Featuring a top-notch Linebar Resaw, an almost new Mellott drop saw trimmer system, a modern electrical system, a 2021 Taylor industrial loader T1023 with under 1000 hours, a 2022 Kenworth W900L tractor, and 50 brand-new band saw blades.
Auction Specialist: Zach Kittrell 931-224-0699
Auction Manager: Kevin Nisley 574-202-6154

Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with.

 

01
Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: June 20, 2024 or by appointment from 9am to 4pm Zach Kittrell 931-224-0699

Location: 2727 Leon Rd, Culpeper, VA 22701

02
Loadout Information
Bright Star Staff will provide free loadout of smalls and uninstalled equipment on Friday until 6pm, Saturday, June 22, 9-4 and from 06/24/24-06/26/24 from 8am-4pm, Call Kevin Nisley with questions at 574-202-6154. After 06/26 all loadout will have to be made by appointment with the rigger at the buyer's expense.
 

03
Rigging Information
RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. 

Recommended Rigger: Wesley Worrell 804-241-5320 wesleyworrell62@icloud.com
 

04
Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 
 

90
Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

91
Heavy Equipment Key Set 36 Keys
Shipping available for $20

92
SDRTOP Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

93
Brand New 36" Cant Hook

94
New Banding Tools
Brand new strapping tool, crimper, and band cutter for 3/4-1 1/4" steel banding

95
New Banding Tools
Brand new strapping tool, crimper, and band cutter for 3/4-1 1/4" steel banding

96
New Banding Tool
Strapping tool for up to 3/4" poly, made by Cord Strap

97
Lincoln Cordless Grease Gun
Includes case, charger, and (2) 2.5 AH 20V batteries

98
Hydraulic Body Frame Repair Kit
Brand new, never used! 10 ton capacity

99
Plastic Log Stamps
2" x 4" plastic stamps, includes hammer

100
HMC V-2110 Rosser Head Debarker
(1st of an entirety) SN: 2110-1699-98, 4' x 4' x 78" cab with AC unit and all controls, includes hydraulic pack under cab, 3" x 24" bull wheels, 4" shafts, air cylinders on kickers, 8' x 40' overall, 75 hp electric motor on head, Air cylinder on head

101
3 Strand Log Deck with Stop'n'Load
(Part of an entirety) Hydraulic cylinder on loading arm, hydraulic drive with Tulsa gearbox, H78 chain, includes support steel to ground, rub rail, strand without chain, 17'6" x 16'6" overall

102
Barn Sweep
(Part of an entirety) Electric drive, 14" paddles, 44" x 30' flat section, 30' incline section, includes support steel, does not include slide pans

103
HMC Debarker Entirety of Lots 100-102
With 10% raise

103A
Debarker Parts
Extra head-ready to mount and use, brand new head positioning air cylinder, (3) sections of 3/8" cable, extra set of teeth and end shoes for head

104
Filer and Stowell 4 HB Carriage and Track
(1st of an entirety) 10' x 20', 4 axle, 1 1/4" air dogs, Tong Dog, Paw Taw John computerized setworks, includes all controls in cab, includes pantograph, track is 61" center to center, 60' long track, includes support steel to ground, does not include carriage drive or idler pullies; HB spacing: 1st to 2nd-6', 2nd to 3rd-54", 3rd to 4th-4'

104
Filer and Stowell 4 HB Carriage and Track
(1st of an entirety) 10' x 20', 4 axle, 1 1/4" air dogs, Tong Dog, Paw Taw John computerized setworks, includes all controls in cab, includes pantograph, track is 61" center to center, 60' long track, includes support steel to ground, does not include carriage drive or idler pullies; HB spacing: 1st to 2nd-6', 2nd to 3rd-54", 3rd to 4th-4'

105
Carriage Drive and Feed
(Part of an entirety) 200 hp electric motor, has cooling unit, Eurodrive gearbox, spool of 3/4" braided cable, includes idler pullies mounted on track

106
Jacobson Carriage Drive Control Panels
(Part of an entirety) (2) Allen Bradly ACS 600 Inverted modules

107
72" Bar Type Log Turner
(Part of an entirety) hydraulic cylinder and drive

107A
25hp Hydraulic Pack
(Part of an entirety) 27" x 60" x 16" tank, includes all hydraulic lines and hoses to equipment

107B
Greer Hydraulic Accumulator
(Part of an entirety) Electric drive, 10 gallon tank, includes all hydraulic lines and hoses to equipment

108
Sawyer's Cab
(Part of an entirety) Does not include any controls inside cab, 4' x 8'6" x 7' tall, has AC unit

109
Filer and Stowell 4 HB Carriage Entirety of Lots 104-108
With 10% raise

110
Letson and Burpee 7' Headrig
W0-653, BM-2776, 10.5" x 7' wheels, 1 1/4" mead on top wheel, air strain, lineal positioning cylinder, does not include electric drive, 30" x 6' slat off bear with electric drive

110A
Jacobson Carriage Drive Control Panel Parts
Crate with electrical parts for lot #106

111
Electric Motor
250 hp, 460V, 1180 rpm, 505UZ frame

112
Saftronics Soft Start
SN: 172608, 250 hp, 460V

113
50hp Hydraulic Pack
24" x 60" x 30" tank, includes all hydraulic lines and hoses to equipment

114
Hydraulic Pack
Approx. 50 hp motor but tag is missing, 24" x 60" x 24" tank, includes spill tray, includes all hydraulic lines and hoses to equipment

115
Slab Dump
Electric drive, 24" belt, 42" x 12', air cylinder on dump

116
5 Strand Log Deck with Stop'n'Load
Hydraulic drive, H78 chain, 17' x 27' plus 5' nose skids, includes rub rail on side, includes support steel to first cross member

117
Roll Case
12" x 36" rolls, 36" spacing, includes (3) 8.5" x 24" rolls by nose skids, 5' x 43', electric drive, air cylinder on pop-ups and stops, includes support steel to ground, air cylinder on kickers

118
Letson and Burpee 7' Resaw
(1st of an entirety) W0-699, BM-2777, 12" x 7' wheels, 1 1/8" mead on top wheel, lineal positioning cylinder, air strain, includes power feed rolls, does not include main electric drive, 10" x 42" feed rolls, 6' x 15' power feed rolls, fully hydraulic, includes pressure gauge bank, includes all controls in cab, includes Paw Taw John computerized setworks

118
Letson and Burpee 7' Resaw
(1st of an entirety) W0-699, BM-2777, 12" x 7' wheels, 1 1/8" mead on top wheel, lineal positioning cylinder, air strain, includes power feed rolls, does not include main electric drive, 10" x 42" feed rolls, 6' x 15' power feed rolls, fully hydraulic, includes pressure gauge bank, includes all controls in cab, includes Paw Taw John computerized setworks

119
Electric Motor
(Part of an entirety) 250 hp, 1200 rpm, 460V, 505UZ frame

120
Benshaw Soft Start
(Part of an entirety) SN: PGH004235, 480V, up to 300 hp, 120V control

121
Infeed Roll Case
(Part of an entirety) 7' x 22", 10" x 42" rolls, 32" spacing, 4 strand pop-up transfer, air cylinders on pop-ups and board stops, hydraulic cylinders on width adjustment, hydraulic drive

122
Outfeed Roll Case
(Part of an entirety) Hydraulic drive, 10.5" x 42" rolls, 34" spacing, 4' x 10'6" 4 strand pop-up transfer, includes shaft shared with lot 123, air cylinders on pop-ups and board stops

123
5 Strand Transfer Deck
(Part of an entirety) Electric drive, H78 chain, 5' x 12'6", does not include shaft shared with lot 122

124
Roll Case
(Part of an entirety) 4' x 73' overall, has 2 electric drives, 18' section with 12" x 36" rolls, 36" spacing, 8.5" x 36" rolls, 32" spacing

125
5 Strand Transfer Deck
(Part of an entirety) Electric drive, H78A rooftop chain, 12' x 15', includes steel plate and rub rail on side, air cylinder on cant stop

126
Roll Case
(Part of an entirety) 5'6" x 24'6", 10.5" x 42" rolls, 32" spacing, 2 way pop-up chain turners, hydraulic drive, hydraulic cylinders on pop-up, includes guard plate at end of roll case

127
50 hp Hydraulic Pack
(Part of an entirety) SN: 21852JF, 150 gallon tank, 42" x 60" x 25" tank, includes all hydraulic lines and hoses to equipment

128
50 hp Hydraulic Pack
(Part of an entirety) 3' x 5' x 2' tank, includes all hydraulic lines and hoses to equipment

129
15 hp Hydraulic Pack
(Part of an entirety) 26" x 45" x 23" tank, includes all hydraulic lines and hoses to equipment

130
Operator's Cab
(Part of an entirety) 7' x 8'6" x 7' tall, has AC, does not include any controls, Includes catwalk steps to cab

131
Letson and Burpee Resaw with Runaround System Entirety of Lots 118-130
With 10% raise

131A
Guide Grinder
Includes 4 aluminum blocks (used on head rig-lot #110) and 4 steel blocks (used on resaw-lot #118), grinder mount, 110V plug-in router/grinder

132
5 Strand Transfer Deck
Feed deck for Runaround system, H78A rooftop chain, electric drive, air cylinder on cant loading arm, 16'6" x 30', includes support steel to ground

133
Roll Case
10" x 48" rolls, 30" spacing, 68" x 27', electric drive, includes support steel to first cross member

134
5 Strand Transfer Deck
Roller chain, electric drive, 12'6" x 10'6" overall, 32" section of tipple arms with air cylinders, includes support steel to first cross member

135
Schurman Gang Edger
(1st of an entirety) Does not include main electric drive, 4" x 48" capacity, electric drive on feed rolls, includes control panel, air cylinders on press down rolls, single arbor, (4) 22" blades-all moveable, (4) laser lights, includes support steel to first cross member, Includes lubrication system panel

136
Electric Motor
(Part of an entirety) 125 hp, 460V, 405T frame, 1760 rpm

137
Saftronics Soft Start
(Part of an entirety) SN: 1-172606, SN #2: 2-166596, 200-600V, 180 amp

137A
Motor Control Panel
(Part of an entirety) Control panel for saw setworks

138
Schurman Infeed Roll Case
(Part of an entirety) SN: 2592A, 8' x 20', includes support steel to first cross member, 8 1/2" x 47" rolls, 36" spacing, 6 strand 2 way transfer, electric drive on rolls, hydraulic drive on transfer, air cylinders on pop-ups, includes air valves mounted to roll case

139
Outfeed Roll Case
(Part of an entirety) 6' x 22', electric drive, includes support steel to first cross member, 8 1/2" x 54' rolls, 24-36" spacing, includes plate steel cover to end of rollcase

140
10hp Hydraulic Pack
(Part of an entirety) 18" x 32" x 16" tank, includes all hydraulic hoses and lines to equipment

141
Schurman Gang Edger Entirety of Lots 135-140
With 10% raise

141A
Gang Edger Blades
(8) 20" blades, 6 1/2" arbor, freshly sharpened or new,

142
Roll Case
Electric drive, 6 1/2" x 24" rolls, 24" spacing, 30" x 42", air cylinders on pop-ups and board stops, includes support steel to first cross member

143
4 Strand Transfer Deck
H78 chain, electric drive, includes support steel to first cross member, 11' x 12' total, 3' section on top of roll case

144
4 Strand Transfer Deck
Electric drive, 8' x 11', 2' section on roll case, air cylinder on cant loading arm, includes support steel to first cross member

145
Edmiston 2 Blade Edger
SN: HE291E, made in 1996, (2) 16" blades-both moveable, hydraulic controls, 4" x 30" capacity, laser lights, 50 hp electric drive, 12" x 24" x 18" hydraulic tank, 3' x 8'6" infeed rolls, 6" x 24' tailing belt outfeed, includes support steel to first cross member

145A
Edger Blades
(8) 16" split blades, 3 1/4" arbor, freshly sharpened or new

146
Saftronics Soft Start
SN: 172566, SN #2: 166536, 50hp, 460V, 65 amp, 180A, 200-600V

147
McDonough 54" Band Resaw
(1st of an entirety) SN: 54-1013SL, 7 1/4" x 54" band wheels, 7/8" mead on top wheel, weight strain, includes control panel and Paw Taw John computerized setworks, does not include main electric drive, includes power feed and infeed rolls, hydraulic drive and cylinders on power feed rolls, 8 1/2" x 24" rolls, 80" x 27' infeed total, 2 way transfer cant turners, air cylinders on board pushers

148
Electric Motor
(Part of an entirety) 75 hp, 365T frame, 460V, 1780 rpm

149
Saftronics Soft Start
(Part of an entirety) SN: 172567, SN #2: 166513, 75 hp, 460V, 96A, 200-600V, 180A

150
Outfeed Roll Case
(Part of an entirety) Electric drive, 8" x 30" rolls, 30" spacing, 45" x 29', includes support steel to first cross member, air cylinders on cant kicker and board stops

151
3 Strand Transfer Deck
(Part of an entirety) 90" x 10', electric drive, roller chain, air cylinder on cant loading arm, includes support steel to first cross member

152
Roll Case
(Part of an entirety) 8" x 24" rolls, 36" spacing, 38" x 40', electric drive, includes support steel to first cross member

153
4 Strand Transfer Deck
(Part of an entirety) H-130 rooftop chain, electric drive, air cylinder on loading arm, 10'6" x 13', includes support steel to first cross member

154
10 hp Hydraulic Pack
(Part of an entirety) 18" x 36" x 18" tank, includes all hydraulic lines and hoses to equipment

155
5 hp Hydraulic Pack
(Part of an entirety) 14" x 24" x 12" tank, includes all hydraulic lines and hoses to equipment

156
McDonough 54" Resaw with Runaround System Entirety of Lots 147-155
With 10% raise

156A
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156B
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156C
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156D
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156E
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156F
Bands
(4) 6 1/2" x 26', fit lot 147, 17 gauge, smooth back, sharpened

156G
Guide Grinder
Includes 8 blocks, grinding mount, 110 plug-in router/grinder, used for lot #147

157
3 Strand Transfer Deck
Electric drive, 9' x 32', includes support steel to ground

158
5 Strand Transfer Deck
Electric drive, H78A rooftop chain, 18'6" x 23', includes support steel to first cross member

159
4 Strand Transfer Deck
Electric drive, H78A rooftop chain, 11' x 10'6", includes support steel to first cross member

160
4 Strand Transfer Deck
Electric drive, H78A rooftop chain, 9' x 31', includes support steel to first cross member

161
3 Strand Transfer Deck
Electric drive, C55B rooftop chain, 10' x 20'6", includes support steel to first cross member

162
5 Strand Unscrambler
Electric drive, 7' x 12', includes support steel to first cross member

163
Mellott 9 Head Drop-Saw Trimmer with Sorting Deck
Electric drive, air cylinders on heads, includes control panel and electrical panel, 28" blades, 7' x 27' x 8' tall overall, 9' x 16' 8 strand sorting deck, roller chain with pegs, 6 1/2" x 30" dead rolls, in like new condition, only in production for approx. 2 years

163
Mellott 9 Head Drop-Saw Trimmer with Sorting Deck
Electric drive, air cylinders on heads, includes control panel and electrical panel, 28" blades, 7' x 27' x 8' tall overall, 9' x 16' 8 strand sorting deck, roller chain with pegs, 6 1/2" x 30" dead rolls, in like new condition, only in production for approx. 2 years

163A
Trim Saw Blades
9 blades, 1 1/4" arbor, 28" blades, all sharpened and ready to use

163B
Trim Saw Parts
Fits lot #163, brand new 81X roller chain for feed deck, poly pegs for chain, head brackets (marked as 357)

164
Saftronics Soft Start
SN: 172559, SN #2: 166665, 50 hp, 460V, 65AAC, 180A, 200-600V, used on lot #163

165
3 Strand Green Chain
Electric drive, roller chain, 10' x 75'

166
Dead Rolls
30" x 19', 4 1/2" x 24" rolls, 30" spacing

167
Dead Rolls
30" x 18', 4 1/2" x 24" rolls, 30" spacing

168
Dead Rolls
30" x 19', 4 1/2" x 24" rolls, 30" spacing

169
Rollers
Approx. 100 pieces 6-8 1/2" x 42" long, includes all rollers around green chain

170
Box Fans
(7) 36" box fans-hung from ceiling by green chain, 110V plug-ins

171
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

172
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

173
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

174
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

175
Electric Stihl Chainsaws
(2) MSE220 chainsaws, (1) 18" bar, (1) 16" bar, 220V plug-ins

176
Precision 66" 6-Knife Chipper
(1st of an entirety) SN: C-3154, size: 66x18, does not include electric drive, includes chip chute to cyclone, Includes full set of sharpened knives in lot #182( Knife Grinder)

177
Electric Motor
(Part of an entirety) 200 hp, 460V, 1770 rpm, 445T frame

178
Saftronics Soft Start
(Part of an entirety) SN: 172557, SN #2: 166562, 200 hp, 240Acc, 460V, 250A, 200-600V

179
Precision Shaker Screen and Cyclone
(Part of an entirety) Electric drive, 5' x 10' screen, 2" x 2" chip holes, 4' x 6' cyclone

180
36" Chip Blower
(Part of an entirety) 40 hp-460V electric drive, 10" x 16" top feed-includes slide chute, triple loading chutes

181
Precision Chipper Entirety of Lots 176-180
With 10% raise

181A
New Main Chipper Bearing
Brand new, feed side bearings, SKF brand, still in box

181B
Chipper Knives
(4) brand new 4" x 21 1/2" knives, (5) full sets of 6 knives-sharpened and ready to use, 13 knives that need sharpened, 47 knives total, includes 2 jigs

182
Precision Knife Grinder
Holds 6 knives-up to 22" long, electric drive, Does not include knives in grinder

183
Webster Vibrating Conveyor
Electric drive, 24" pan, 10" sides, includes chipper infeed section, fines section, and fiberglass section, 39" x 48'

184
MDI Metal Detector
Includes control panel

185
Webster Vibrating Conveyor
Electric drive, 24" pan, 10" sides, 39" x 83', does not include slide pan

186
Webster Vibrating Conveyor
Electric drive, 24" pan, 10" sides, 39" x 20', located under trim saw

187
Belt Conveyor
2' x 29', 20" pan, 6" sides, 16" belt, electric drive

188
Chain Conveyor
Electric drive, 11" ladder back chain, 13" pan, 6" sides, 20" x 48'

189
Dust Auger
14" auger, electric drive, 2' x 36'

208
Diesel Fuel Tank
64" x 12' long, Fill-Rite, 115V, fuel pump with nozzle

190
3 Van Auger Loading System
Electric drive, (1) 27' x 14" distribution auger, (3) 12" x 35' loading augers, 40' x 40' overall, includes control panel, and all support steel to ground

191
Dust Auger
12" auger, electric drive, 18" x 24', does not include slide pans

192
Dust Auger
12" auger, electric drive, 18" x 21'6", no slide pan included

193
Barn Sweep
Located under head rig, electric drive, 10" paddles, 34" x 11' decline section, 4' flat section

194
North Star Air Compressor
80 gallon vertical tank, 7 1/2 hp electric motor, includes disconnect boxes

195
Chain Conveyor
Electric drive, 11" ladderback chain, 14" pan, 5" sides, 22" x 42'6"

196
Chain Conveyor
Electric drive, 11" ladderback chain, 14" pan, 5" sides, 2' x 65', does not include slide pans

197
Bands
Fit lots 110 and 118, (5) 10" x 43'4", sliverback, sharpened, 14 gauge

198
Bands
Fit lots 110 and 118, (6) 11" x 43'4", sliverback, sharpened, 14 gauge

199
Bands
Fit lots 110 and 118, Brand New, (6) 10" x 43'4", sliverback, 14 gauge

200
Bands
Fit lots 110 and 118, Brand New, (6) 10" x 43'4", smooth back, 14 gauge

201
Bands
Fit lots 110 and 118, (5) 10" x 43'4", smooth back, sharpened, 14 gauge

202
Bands
Fit lots 110 and 118, (5) 10" x 43'4", sliverback, sharpened, 14 gauge

203
Bands
Fit lots 110 and 118, Brand New, (6) 10" x 43'4", smooth back, 14 gauge

204
Bands
Fit lots 110 and 118, Brand New, (5) 12" x 43'4", smooth back, 14 gauge

204A
Bands
Fits lots 110 and 118, (3) 10" x 43'4", 17 gauge, used, 2 sliverback, 1 smooth back

205
Saftronics Soft Start
SN: 172603, SN #2: 166561, 200 hp, 460V, 240 Acc, 250A, 200-600V, uninstalled, located in Jacobson Control Panel room

206
Cat 3508 Genset
Generator SN: 3EN00510, fuel type: Diesel, 1800 rpm, engine was rebuilt at 24838 hours, 900 kw, 1125 KVA, 480V, 3 ph, (4) 24V batteries, 7' x 14' x 8'6" tall overall, includes exhaust pipe

207
Cat 3512 Genset
Generator SN: 6NA03570, fuel type: Diesel, 1800 rpm, 1000 kw, 1250 KVA, 480V, 3 ph, (4) 24V batteries, Includes exhaust pipe

209
Cutler-Hammer Powerline Switchboard
(2) 2000 amp switches, 480V, includes conduit from gensets to switchboard to motor control panels

210
15W-40 Oil
(2) partial barrels of 15W-40 motor oil, includes hand pumps

213
Kaeser CSD 100ST Air Compressor
SN: 1004, made in 2003, 460V, 125 psig, 100 hp electric motor, 425 cfm, includes air line from compressor to tank, includes disconnect box

214
Vertical Air Tank
40" x 9' tall, includes all air line from tank to equipment, includes Kaeser water evaporator and air filters mounted in air line

215
Cutler-Hammer Freedom Series 2100 Motor Control Center
480V, 3 ph, 600 amps/section, 13 sections, 2' x 23' x 93" tall overall, includes conduit from control center to 1st junction box above control center

216
Cutler-Hammer Powerline Switchboard
2000 supply amps, 600 VAC, 3 pole, 480V, 1600 amp max switch, includes conduit from switchboard to 1st junction box above switchboard

217
Cutler Hammer Freedom Series 2100 Motor Control Center
480V, 3 ph, 600 amp, single section

218
Asco Auto Power Transfer Switch
SN: 497192RE, Series 300, 240V, single phase, includes (2) 100 amp disconnects, includes dry type, 480V to 240V transformer, includes junction box as marked, includes wire in box, includes extra auto transfer switch box, includes conduit from panels to 1st junction box and from panels to transformer

219
480V Panels and Transformer
480V breaker panel, Aegis SP225 Surge suppressor, Cutler hammer dry type transformer, 480V to 240V, 200 amp disconnect panel, includes conduit from panel to transformer and from panels to 1st junction box

220
Conduit
Includes all conduit and wire from all electrical panels to equipment not lotted otherwise, includes all junction boxes in building, 1' of conduit to be left on motors and starter panels, does not include any 110V conduit or panel, does not include electronic control wiring for setworks etc. Only include wiring inside conduit and junction boxes

221
110V Electrical
Includes all 110V breaker panels and conduit in building, includes all 110V lighting, includes junction box in electrical room as marked, includes 460V transformer

222
Cabinet with Electrical Components
19' x 42' x 67" tall, includes all contents, breakers, switches, controls, control boards, starters

223
Cabinet with Electrical Components
18" x 36" x 75" tall, includes all contents, fuses, switches, breakers, etc.

224
Structural Steel
Includes all support steel, slide pans, and catwalk in building not lotted otherwise, Including all large I-Beams under back half of mill(Under Resaw and Shurman Edger) were originally supports for a highway overpass, does not include any supports needed for the building itself

225
Wheelbarrow and Hand Tools
10 cubic yard 2 tire wheelbarrow, shovels, cant hook, broom, fork, sledge hammer

226
Wheelbarrow and Hand Tools
10 cubic yard 2 tire wheelbarrow, shovels, cant hook, broom, fork, sledge hammer

227
Wheelbarrow and Hand Tools
10 cubic yard 2 tire wheelbarrow, shovels, cant hook, broom, fork, sledge hammer

228
Pipe Wrenchers
(1) Ridgid 48", (1) Ridgid 36"

229
Hand Tools
Shovels, broom, cant hook, sledge hammer

230
Hand Tools
Shovels, scraper, cant hooks

231
Hand Tools
Shovels, cant hook, sledge hammer

231A
Ridgid 300-12 Pipe Threader
SN: ED63283F00, 115V plug-in, 36 rpm, foot pedal control, on stand, Includes 2 new sets of teeth

232
Workbench with Tools
35" x 88" x 38" tall, includes all tools and parts on bench and pegboard, 3 1/2" bench vise, includes 2 air hose reels mounted beside bench, Extension cords

233
Floor Fans
(1) 36" by gang edger, (1) 24" by gang edger, (1) 28" by head rig, (1) 36" by trimsaw

234
Hand Tools
Shovels, broom, sledgehammer, scraper, located by green chain

235
Hand Tools
Shovels, broom, cant hook, sledge hammer, splitting maul, located by green chain

235A
Extension Cord Reel
220V cord, 600V, 35 amp, located by green chain

235B
Extension Cord Reel
220V cord, 600V, 35 amp, located by green chain

236
Dip Tank
6' x 20' x 78" deep, includes hydraulic pack for power, includes electrical control panel

237
Salem 11 Head Drop Saw Trimmer
Electric drive, no saws installed, air cylinders on head, 5' x 28' x 8'6" tall overall, uninstalled, feed deck included but not attached, includes (22) 26" blades-some sharpened, includes PCL electrical control panel, includes control panel

238
Salem Sorting Deck
8" x 24" rolls, 12' x 24', 11 strand, no chain installed on 2 strands-includes chain to install, no drive, uninstalled

239
Dead Rolls
30" x 19', 4 1/2" x 24" rolls, 30" spacing, no legs

240
Mellott 5 Strand Unscrambler
Electric drive, 7' x 12' x 4' tall, uninstalled

241
Roll Case
No drive, 64" x 22', 10 1/2" x 48" rolls, 30" spacing, uninstalled

242
Webster Vibrating Conveyor
No drive, uninstalled, 24" pan, 10" flared sides, 39" x 16'3"

243
McDonough 54" Band Resaw
SN: 54-880, no drive, uninstalled, 7 1/4" x 54" wheels, 7/8" mead on top wheel, top wheel needs mounting hole, recalibrated/machined, includes gearboxes/electric motors, pallet as marked

244
G.E. AC/DC Carriage Drive
SN: 3855-G, 250 hp, 460V, 1180 rpm electric motor, 200 kw unit, 200 amps, empty wire spool for up to 1' cable, includes 24" blower with electric drive

245
Carriage Idler Pullies
2 1/2" x 47" pullies-hold up to 1 1/4" cable, mounted on frame, 3' x 6' x 54" tall overall

246
Miller "Big 40" Welder/Generator
SN: HH079911, 40V, 100 amp, welding range-15-400, 4 cylinder gas motor. Ran when put into storage-but engine had a knock

247
Lumber End Sprayer
57" x 69" x 60" tall, dual sprayers with 110V plug-ins, includes 2 partial barrels of end paint

248
Dip Tank Mixer
110V plug-in, used to keep dip tank stirred

249
Crane Mat Drilling Machine
100V plug-in, Milwaukee Super Hole Shooter 3/4" drill, includes (2) 1" x 7' drill bits, mounted on castors

250
Mohawk LMF-12 Car Lift
SN: 9201116, 12000 lbs capacity, powered by 2 hp, 220/440V hydraulic pack, 7" x 12" x 21" hydraulic pack, uninstalled, includes disconnect box

251
Mohawk LMF-12 Car Lift
SN: 9201117, 12000 lbs capacity, powered by 2 hp, 220/440V hydraulic pack, 7" x 12" x 21" hydraulic pack, uninstalled, includes disconnect box

255
2021 Taylor T1023 Wheel Loader
SN: P-45538 (PIN: CLG848HZLLL620368).
Meter reads: 1,716 hours.
Engine: Cummins QSB6.7-173 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 25".
Operating capacity: 34,710 lbs.
Tire Size: 20.5R25.
Attachments: None included.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Has backup camera, joystick control, and air ride seat. Runs and operates flawlessly. Has full warranty from Taylor to 10,000 hours or 01/27/2032.

255A
Rockland Grapple Forks
SN: 199823, Model: LFW, mounted on lot #255, 7" x 48" forks, 6' wide, quick attach

256
2014 Volvo L70G Wheel Loader
SN: VCE0L70GE0S614348.
Meter reads: 11,195 hours.
Engine: Volvo D6H (SN: 11586949)-154 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 20".
Operating weight: 30,730 lbs.
Tire Size: 20.5R25.
Attachments: None included.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Hydraulic cylinder with button control to open engine bay. Has backup camera and air-ride seat. Starts, runs, and operates great!

256A
Craig Grapple Forks
SN: T14110059, mounted on lot #256, weight: 3840 lbs, 6" x 48" forks, 75" wide, quick attach

257
2007 Komatsu WA-200 PT-5 Wheel Loader
SN: 68753 (PIN: KMTWA052L01068753).
Meter reads: 11,382 hours.
Engine: Komatsu 5.9L (SN: 26400039)-128 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 18".
Operating weight: 25,800 lbs.
Tire Size: 20.5R25.
Attachments: JRB forks, 6" x 48", 64" wide
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Starts, runs, and operates good. This loader is being reserved on the seller's behalf until 6/28/24 to assist with loadout. Possession and ownership of this machine will transfer to the new buyer on the above listed date. Payment for this machine is due on the above listed date. Seller warrants the machine will be insured and in the same condition as it was on auction day. There may be some additional hours on the meter.

258
2006 Komatsu WA320-5L Wheel Loader
SN: A32761 (PIN: KMTWA028C57A32761).
Meter reads: 17,528 hours.
Engine: Komatsu 5.9L (SN: 46572138)-171 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 26".
Operating weight: 24,360 lbs.
Tire Size: 20.5R25.
Attachments: JRB pin through grapple forks-7" x 45", 78" wide.
Heater: Yes.
A/C: Yes.
Quick Attach: No.

Features and Notes: Starts, runs, and operates good

259
2009 Komatsu WA320 PZ-6 Wheel Loader
SN: 70643 (PIN: KMTWA108K01070643).
Meter reads: 20,377 hours
Engine: Komatsu SAA6D107E (SN: 26555462)-171 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 28".
Operating weight: 21,150 lbs.
Tire Size: 20.5R25.
Attachments: JRB pin through grapple forks-7" x 42", 78" wide.
Heater: Yes.
A/C: Yes.
Quick Attach: No.

Features and Notes: Starts, runs, and operates good

260
JRB Quick Attach Loader Bucket
Model: WA250, SN: 0705-162177-176, was used on lot   # 257-Komatsu WA-200 PT, 38" x 104" x 44" tall

265
1997 John Deere 550G LGP Series IV Dozer
SN: T0550GL831846.
Meter reads: 3,714 original hours.
Engine: 4 cylinder John Deere.
Fuel type: Diesel.
Blade: 10' 6 way.
ROPS: Open cab.
A/C: No.
Heater: No.

Features and Notes: 24" tracks, John Deere winch with 1" cable, Forestry package, power shift transmission, Foot steering. Starts, runs, and operates strong.

268
2000 Barko 885B Feller Buncher*
SN: 22785, Meter read: 7532 hours, with 22" cutter head

269
22" Cutter Head*
Can fit 885B Feller Buncher

270
2005 Prentice 280D Knuckleboom
SN: D280PR59806.
Meter reads: 4,289 hours.
Engine: 6 cylinder Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes, 48" max.
Trailer: Evans.
Delimber: None.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes

Features and Notes: 11R22.5 tires, pilot joystick controls. Starts, runs, and operates. 

271
CTR Bucksaw
Model: CTR-50-MAXIE, SN: 50-181, 64" x 17'6" rack, 48" bar, direct drive

275
2022 Kenworth W900 Truck
VIN #: 1XKWD49X7NR173429.
Meter reads: 97,057 original miles
Engine: Cummins X15 (SN: 80381993).
HP: 565.
Transmission: 18 speed Eaton Fuller.
GVWR: 53,200 lbs.
Front axle rating: 13,200 lbs.
Rear axle rating: 20,000 lbs.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R22.5 tires, 60" sleeper, New batteries installed 11/2023. Starts and runs well! Under full warranty from Kenworth until 500,000 miles or 12/27/2026. Has title.
 

276
2003 Peterbilt 379 Truck
VIN #: 1XP5D49X03D802786.
Meter reads: 181,406 miles-rolled over once.
Engine: Cummins ISX (SN: 60810341).
HP: 600.
Transmission: 10 speed Eaton Fuller.
GVWR: 50,000 lbs.
Front axle rating: 12,000 lbs.
Rear axle rating: 19,000 lbs each.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R24.5 tires, 48" sleeper, less than 200,000 miles on engine-was installed by Cummins, less than 300,000 miles on new transmission and rear end. Starts and runs good. Has title.

277
2000 Peterbilt 379 Truck
VIN #: 1XP5DB9X8YN508915.
Meter reads: 601,080 original miles
Engine: Cat C15 (SN: 6NZ03703).
HP: 475.
Transmission: 10 speed Eaton Fuller.
GVWR: 50,000 lbs.
Front axle rating: 12,000 lbs.
Rear axle rating: 19,000 lbs.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R24.5 tires, day cab. Starts and runs good. Has title. 

278
2017 Kenworth W900 Truck
VIN #: 1XKWD49X8HJ139874.
Meter reads: 607,598 miles.
Engine: Cummins ISX15 (SN: 79898058).
HP: 550.
Transmission: 18 speed Eaton Fuller.
GVWR: 53,200 lbs.
Front axle rating: 13,200 lbs.
Rear axle rating: 20,000 lbs. each.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R24.5 tires, 48" sleeper. New batteries on 5/17/2024. Starts and runs. Very nice clean truck. Has title. Needs new head gasket or potentially more work done to head

280
2007 Fontaine Phantom Flatbed Trailer
VIN #: 1R1F348287K570792.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps, toolbox under deck, aluminum trailer. Has title.

281
2007 Fontaine Phantom Flatbed Trailer
VIN #: 1R1F348207K570754.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding rims, includes sliding straps, toolbox under deck, aluminum trailer. Has title.

282
2006 Reitnouer MaxLite Flatbed Trailer
VIN #: 1RNF48A226R011645.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps, aluminum trailer. Has title. 

283
2006 Reitnouer MaxLite Flatbed Trailer
VIN #: 1RNF48A206R011630.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps, aluminum trailer. Has title.

284
1997 Fontaine Ultra Flatbed Trailer
VIN #: 13N145309V1575034.
GVWR: 80,000 lbs.
Length: 45'.
Width: 8'.
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps. Has title.

285
1998 Fontaine Ultra Flatbed Trailer
VIN #: 13N145309W1579893.
GVWR: 80,000 lbs.
Length: 45'.
Width: 8'.
Tires:11R24.5.

Features and Notes: Steel rims, missing 2 tires, includes sliding straps, missing several lights. Has title. 

290
1985 Shop Built 4 Bunk Log Trailer
VIN: VA181140TR.
Length: 40'.
Bunk size: 87" wide x 85" tall.
Bunk spacing: 11'.
Tires: 11R22.5.
No title, bill of sale only.

295
1988 Great Dane Chip Van Trailer
VIN #: 1GRAA9024JS057238.
GVWR: 65,000 lbs.
Length: 42'.
Inside width: 88".
Inside height: 102".
Tires: 295/75R22.5.

Features and Notes: Half door in rear-hinged at top. No title, bill of sale only.
 

296
1984 Fruehauf Chip Van Trailer
VIN #: 1H2V04825EC003542.
GVWR: 68,000 lbs.
Length: 45'.
Inside width: 98".
Inside height: 112".
Tires: 11R22.5.

Features and Notes: Holes cut in rear doors for chip-chutes. No title, bill of sale only.

297
1977 Fruehauf Chip Van Trailer
VIN: MEY529991.
GVWR: 68,000 lbs.
Length: 45'.
Inside width: 96".
Inside height: 102".
Tires: 11R24.5.

Features and Notes: No rear door. No title, bill of sale only.

298
1974 Miller Open Top Chip Trailer
VIN: Y2080813.
GVWR: 73,950 lbs.
Length: 40'.
Inside width: 92".
Inside height: 92".
Tires: 295/75R22.5.
No title, bill of sale only.

299A
Rol-Lift Pallet Jack
SN: E2914637, 6" x 48" forks, 4500 lbs capacity

299B
Whitco Power Washer
Model: 4200, SN: PL01844, 220 plug-in, diesel powered heater, includes wand and 25' of pressure hose

300
Security Camera System
Includes control box and monitor in women's bathroom in break room building, includes all cameras in mill building and break room

301
Lockers
(3) sections located in break room, (1) 18" x 36" x 78" tall, (1) 18" x 48" x 78" tall, (1) 18" x 60" x 78" tall

302
Emergency Eye Wash Station
Located in break room, includes first aid kit on wall

303
Lathem Time Clock Machine
110V plug-in, includes time card holders

304
New WEG Electric Motor
5 hp, 460V, 3 ph, 182/4T frame, 1750 rpm

305
New WEG Electric Motor
5 hp, 460V, 3 ph, 182/4T frame, 1750 rpm

306
New WEG Electric Motor
7 1/2 hp, 460V, 3 ph, 182/4T frame, 1750 rpm

307
New WEG Electric Motor
3 hp, 182/4T frame, 1765 rpm, 460V, 3 ph

308
New WEG Electric Motor
7 1/2 hp, 213/5T frame, 3 ph, 1765 rpm, 460V

309
Air Compressor
Mounted on 4' x 90" skid unit, includes gas jug and 2 hoses, mounted to unit, Predator 420cc gas motor, 20" x 4' horizontal tank

310
V-Groove Pulley
21", 10 groove, 6 1/2" arbor

311
Ridgid Pipe Threader
110V plug-in, foot pedal control; condition unknown

312
Willis Drill Press
Model: SENR7, SN: 3717, 3 ph electric motor-110V plug-in, 18" x 18" table top, Heavy Duty

313
WEG Electric Motor
3 ph, 75 hp, 1775 rpm, 460V, rewound, 364/5T frame

314
Westinghouse Electric Motor
250 hp, 1775 rpm, 445T frame, 460V, 13 1/2" 8 groove pulley, mounted on steel frame was used to run old circle mill, was in good working condition, when put into storage

315
Toshiba Electric Motor
125 hp, 1760 rpm, 405T frame, 460V, rewound

316
Westinghouse Electric Motor
50 hp, 1770 rpm, 326T frame, 460V, rewound

317
Electric Motors
(3) 5 hp motors, 4 gearboxes

318
7 1/2hp Hydraulic Pack
SN: 89A028, 10 gpm, 460V, 2000 max psi, 26" x 48" x 12" tank

319
Electric Motors
(1) 7 1/2 hp, 460V, 1165 rpm, (1) 10 hp, 460V, 1730 rpm with gearbox

320
Babbitt Bearing Machines
Used to make bushings for lot #135, air powered press, 110V surfacer, includes melting ladle

321
Guide Dressing Machine
110V plug-in, includes steel blocks and wood dressing blocks

322
Guide Grinder Dressing Blocks
30 pieces, 2" x 3 1/2" x 12", flat

323
Guide Grinder Dressing Blocks
16 pieces, 1 5/8" x 2" x 10", grooved

324
Guide Grinder Dressing Blocks
13 pieces, 1 1/8" x 1 1/4" x 7", grooved

325
WEG Electric Motor
75 hp, 1775 rpm, 364/5T frame, 460V, rewound

326
Electric Motors and Gearboxes
7 1/2 hp motor with drive for vibrating conveyor, gearbox, 7 1/2 hp motor, 5 hp motor

327
Electric Motor
20 hp, 230/460V, 3652 frame, mounted on frame

328
Electric Motor
25 hp, 1800 rpm, 460V, rewound

329
Teco Electric Motor
200 hp, 1180 rpm, 460V, 447TZ frame, was used on AC/DC carriage drive, was in good running condition when taken out

330
Toshiba Electric Motor
200 hp, 1770 rpm, 460V, 445T frame, rewound

331
GE Electric Motor
250 hp, 1175 rpm, 440V, 8155Z frame, rewound

332
Electric Panels
460V panels with switches and breakers, breaker panel box, 600 amp disconnect box

333
Electric Panels
Motor control center with starters/disconnects, breaker panel

334
Silvatech Carriage Setworks
Brand new control panel with all wiring needed, includes extra boxes and parts, complete setworks

335
Tempo Sonic Sensors
(4) 24" sensors, (5) 32" sensors, new laser light

336
Banner Laser Scanner Bar
Model: MAHE26A, includes wiring, 2 bars

337
Banding Supplies
Banding tools, clips, cardboard corners, poly corner protectors

338
Banding Cart and Banding Tools
2 full and 1 partial roll of 1 1/4" steel banding, strapping tool, crimper, snips

339
Skid of 3/4" Poly Banding
1640' per roll, 12 full rolls, 3 boxes of clips, 500 clips/box

340
Banding
3 full and 1 partial roll of 5/8" poly banding, 4 boxes and 1 bucket of clips

341
Banding
12 full rolls of 3/4" steel banding, 5 gallon bucket of clips

342
Banding
4 full rolls of 3/4" steel banding, plastic tote of clips

343
Banding Cart
No banding, includes strapping tool and crimper

344
Banding Cart
No banding, missing 1 wheel, strapping tool and crimper

345
Banding Cart
Partial roll of 3/4" steel banding, strapping tool and crimper

346
Banding Cart
No banding, crimper and strapping tool

347
Banding Cart
Partial roll of 3/4" steel banding, strapping tool, crimper, snips

348
Banding Tools
Assorted Strapping Tools, cutters, extra parts

349
Brand New Banding Tools
Strapping tool and crimper, for steel banding up to 3/4"

350
Brand New Banding Tools
Strapping tool and crimper, for steel banding up to 3/4"

351
Brand New Banding Tools
Strapping tool and crimper, for steel banding up to 3/4"

351A
Banding Tools
Assorted styles, crimpers, strapping tools

352
MDI Metal Detector
Brand new control panel, includes detector and 5' fiberglass conveyor section, 18" pan, 10" flared sides

353
Poly Sheets
(2) 4' x 10' x 1/4", (1) 4' x 10' x 3/8", 2 thick strips

354
Assorted Poly Strips

355
Screen for Chip Shaker
In 2 pieces, 5' x 8' total, 2" holes

356
Pallet of Chain
(31) 10' sections of new C55B rooftop chain, roll of 28" steel slats

358
Rolls
(1) 12" x 36", (1) 10 1/2" x 42", (1) 8 1/2" x 36", (1) 8 1/2" x 24", shaft parts

359
Conveyor Belts
(1) 40", (1) 30", (2) 24", (1) 14", (1) 16", lengths unknown

360
Pallet of Chain
(4) 10' sections of new WH78 chain

361
Fluids
(14) 1 gallon jugs of bar and chain oil, (2) 3 gallon jugs of 22 Express anti mold

362
Pallet of Chain
(10) 10' sections of new H78 chain

363
Wire Spool
Partial spool of wire

364
Pallet of Chain
(14) 10' sections of H78A rooftop chain, mostly new, some gear roller chain

365
Parts for Milling Machine
Wrenches and dies

366
2-Way Cant Turner
Used in roll cases for runaround system, hydraulic drive

367
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367A
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367B
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367C
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367D
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367E
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367F
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367G
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367H
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367I
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367J
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367K
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367L
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367M
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367N
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367O
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

42039667

368
Braided Carriage Cable
Full set of 3/4" cable-2 long and 2 short, plus extra partial spool of 1/2" cable

369
Crate of Motors and Gearboxes
Misc. 3-10 hp motors, gearboxes, parts

370
56" Circle Saw
F7 style, good condition

371
56" Circle Saw
F7 style, good condition

372
56" Circle Saw
No bits or shanks, was broken and repaired

373
54" Circle Saw
F72 style, good condition

374
54" Circle Saw
F7 style, good condition

375
Assorted Braided Cable
3/4", 3/8", 1/2", 5/8"

376
Steel Rods
Were used for crane mats, 1" pipe-(16) 20' pieces, includes hand tools to add threading

377
Lights
Dome style ceiling lights

378
Tarps
3 pieces, size unknown, 2 very large ones, steel cover

379
Banding Tools
Assorted styles, crimpers, strapping tools

380
New Conedrive Gearbox
Model: HU50-1, 5:1 ratio, 1750 input rpm, includes extra parts

381
Assorted Tools
Electric cord reel, assorted hand tools, work lights, extension cord, Yale 3/4 ton chain hoist

382
Hydraulic Cylinders
Assorted sizes, hydraulic hoses, good condition

383
Electric Motors and Gearboxes
Drive for vibrating conveyor, misc. gearboxes, 3-10 hp motors

384
Lincoln Electric Motor
30 hp, 1755 rpm, 460V, 286T frame, rewound

385
Toshiba Electric Motor
7 1/2 hp, 460V, 1750 rpm, 213T frame, rewound

386
Pallet of Grease
Aeroshell 16 grease, was used as 5th wheel grease, (29) 5 gallon buckets full

387
Vibrating Conveyor Fiberglass Section
40" x 5', 24" pan, 10" flared sides

388
Beacon Contractor's Mix Grass Seed
(9) full 50 lbs bags, 1 partial bag

389
Jockey Grinder
Mounted on Milwaukee drill

390
Jockey Grinder
Model: 85H, mounted on Milwaukee grinder

391
Jockey Grinder
Mounted on Milwaukee drill

392
Jones Saw Grinder
Model: 6M, SN: 6858K, mounted on drill

393
Jockey Grinder Discs
(39) brand new Simonds discs, dressing blocks, extra parts

394
Circle Saw Tooth Setters
4 setters, box of clips

395
Shanks and Bits
Box of assorted new circle saw bits and shanks

396
Pallet of Grease
Aeroshell 22 grease, was used as 5th wheel grease, Aeroshell 33 grease, some buckets, some tubes

397
Pallet of Grease
Aeroshell 22 grease, was used as 5th wheel grease, Aeroshell 33 grease, some buckets, some tubes

398
Floor Fan
30", on stand, 110V plug-in

399
Floor Fan
40", on castors, 110V plug-in

400
Floor Fan
40", on castors, 110V plug-in

401
Ladderback Chain
Brand new, 12", (5) 10' sections

402
Ladderback Chain
New-never installed, just sat for several years, 12" (5) 10' sections

403
Electrical Panels
Several control panels, junction box, brand new Cutler Hammer box-empty

404
Pallet of Assorted Wire

405
Hydraulic Hoses
Assorted hoses, big hoses for carriage drive, some brand new hoses, hydraulic radiator unit, (4) pieces of 3/4" x 10' steel, hydraulic line

406
Pallet of Misc.
28" floor fan, hand tools, assorted air hose, ratchet straps

407
Rollers
8 1/2" x 48", 15 pieces

408
Catwalk Sections
(9) 2' x 20' sections, assorted smaller pieces

409
Kiln Carts
Approx. 60 sets, no cross members, 6' long

410
Shelf of Chain
All brand new, 20-1600 and 20-1640 roller chain, 81X chain, 20-1760 roller chain, 20-1740 chain, H74, H60, H78 chain, pegs for chain H130 and H78B rooftop chain, includes all chain on shelf, does not include shelf or contents of top shelf

411
Shelf of Parts
Flex conduit, conduit fittings, wiry, misc. parts, includes all contents of shelf as marked

412
Shelf of Parts
Shingles, new dome lights, lots of brand new small roller chain, 40' of new #120 RIV chain, 30 of new GS 100 RIV chain, Tulsa Gearbox, pulleys, roller, guards, includes all contents of shelf except pipe on top shelf

413
End-Paint Sprayer
395 ST Pro paint sprayer, 110V plug-in, 1 full and 1 approx. 3/4 full barrel of Anchor seal spray

414
Crate of Electrical
Lots of assorted wire, conduit fittings, includes conduit pipe on top of shelf #412, includes conduit beside crate

415
Shelf of Parts
Junction boxes, pulleys, sprockets, bearings, electric motors, hydraulic cylinders and valves, Accumulator tanks, assorted fittings for carriage

416
Shelf of Parts
Lots of chipper parts-nuts and bolts, counter knives, knife holders, (4) laser lights-condition unknown, laser light brackets, window AC unit, 18" conveyor belt, new emergency eyewash station, electrical components, rubber bump stop

417
Genset Radiator
For Cat 3412 Genset, 2 piece radiator

418
Edger Feed Rolls
3 1/2" x 30" rolls, rebuilt, fit Edmiston edger

419
Trim Saw Blades
(8) 26", (2) 24" all 1 1/2" arbor, all sharpened

420
Shelf of Parts
Light bulbs, lots of electrical, switches, breakers, boxes, disconnects, motor mount frames, Partial Barrel of Essentia Lube

421
Shelf of Parts
18" x 45" x 75" shelf with all contents, assorted fluids, cordless grease guns, threaded rod, cylinder, includes rods and hand tools against end of shelf

422
Shelf of Parts
18" x 45" x 75" shelf with all contents, bottle jacks, truck parts, hand cleaner, bearings, washers-flat and lock, laser light brackets, threaded rods

423
Shelf of Parts
18" x 45" x 75" shelf with all contents, hydraulic motors and cylinders, hydraulic fittings, cotter pin assortment hydraulic tank heaters, banding tools, Mac Valve packing kits, Parker Drip Lube Kits

424
Shelf of Parts
18" x 45" x 75" shelf with all contents, air and hydraulic cylinders, hydraulic motors, gearboxes, valves, air bladders, debarker parts, bearings, safety gear

425
Shelf of Parts
18" x 45" x 75" shelf with all contents, assorted filters, hydraulic valves, sprockets, pulleys, bushings, conduit fittings, coil springs for vibrating conveyor

426
Shelf of Parts
18" x 45" x 75" shelf with all contents, bearings, bushings, sheaves, shafts, new shelving

427
Fire Extinguishers
11 pieces, assorted sizes

428
Shelf with Parts
18" x 45" x 75" shelf with all contents, Flexco belt lacing and belt lacing tool, roller chain, pegs for chain, filters

429
Shelf with Parts
18" x 45" 75" shelf with all contents, lots of new small size roller, chain, chain parts and master links, key stock, carriage parts, assorted fasteners

430
Shelf with Parts
12" x 36" x 75" shelf with all contents, hand held pipe threader with 3 dies, tap and die kit, thread repair kit

431
Bolt Bin Organizers
12" x 36" x 64" total-2 sections, includes all contents and contents on top of organizer

432
Steel Workbench
32" x 9' x 42" tall, does not include bench vise or bench grinder, (2) organizers, assorted hand tools, includes pegboard and all contents of pegboard, oil waste can

433
Wilton 10" Bench Grinder
Model: 180, SN: P9520, 115V plug-in

434
Olympia 6" Bench Vise

435
Shelf of Parts
Misc. nuts and bolts, fluids, air filters, parts for lube systems, safety signs, 4' level

436
Shelf of Parts
Bearings, sprockets, O-rings, copper tubing, fittings,

437
Shelf of Parts
(5) brand new 18" broom, heads, air valves, parts and fittings, nails, covers, laser light, hydraulic hose cover, carriage wheel

438
Battery Charger
Single cylinder gas motor, includes cables, condition unknown

439
Cabinet with Welding Parts
2' x 3' x 78" tall, lots of welding rods, mask, tank saugers, cutting torch, pop rivet tools

440
Cabinet with Parts
20" x 2' x 3' tall, assorted welding parts, assorted wire, wear plate for carriage, shaft stock

441
Amrox Drill Press
Model: AF12, 5/8 chuck capacity, JT-3 spindle, 110V plug-in, includes 2 boxes of bits, and vise clamp

442
Continental 30 Ton Shop Press
Model: HV100, frame rated for 30 ton, 50 ton bottle jack

443
Hand Tools
Includes all hand tools hanging from wall, grease guns, wire, jumper cables, flex magnet, oil can, U-bolts, filter wrenches

444
Assorted Motor Belts
Includes all belts hanging on wall in lower level of mill building, includes pallet of belts, lots of brand new belts

445
Mandrel Shaft
2 7/16" x 16'8"

450
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

451
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

452
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

453
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

454
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1350 pieces

455
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

456
4x4's
(100) 3" x 4" x 8' long

457
4x4's
(100) 3" x 4" x 8' long

458
4x4's
(116) 3" x 4" x 8' long

459
4x4's
(100) 3" x 4" x 8' long

460
4x4's
(100) 3" x 4" x 8' long

461
Rough Cut Lumber
Mixed species, kiln dried, approx. 180 BF, 3/4" thick

462
Assorted Hardwood Flooring
T and G, 8-12' long, 4-7" wide includes trim, approx. 750 BF kiln dried, 3/4" thick

463
Assorted Hardwood Flooring
5-7" wide, 8-15' long, T and G, kiln dried, approx. 3000 BF, 3/4" thick

464
Assorted Hardwood Flooring
4-6" wide, 9-12' long, T and G, kiln dried, approx. 2800 BF, 3/4" thick

465
Rough Cut Mixed Species Lumber
Kiln dried, 1" thick, 4-12" wide, 12' and 14' long, approx. 2000 BF

465A
Assorted Hardwood Flooring
3/4" thick, 4-7" wide, 8-12' long kiln dried, approx. 1600 BF T and G

466
Rough Cut Mixed Species Lumber
Kiln dried, 3 1/2-12" wide, 1" thick, approx. 3000 BF, 8', 14', 16' long

467
Assorted Hardwood Flooring
3/4" thick, 4-8" wide, kiln dried, includes some trim, 10' long, approx. 2500 BF, T and G

468
Assorted Hardwood Flooring
3/4" thick, kiln dried, T and G, 3-8" wide, 10' long, approx. 2600 BF

469
Assorted Hardwood Flooring
4-5" wide, 3/4" thick, T and G, kiln dried, 14'6" long, approx. 1200 BF of flooring, includes approx. 350 BF of rough cut kiln dried lumber on top of flooring

470
Rough Cut Mixed Species Lumber
Kiln dried, 1 1/2-2 1/2" thick, 4-16" wide, 10'6"-12' long, approx. 750 BF

471
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 2"-8" wide, 8'-11' long, approx. 1700 BF

472
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 8-12' long, 4-6" wide, approx. 2600 BF

473
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 2-8" wide, 8-11' long, approx. 1200 BF

474
Rough Cut Mixed Species Lumber
Kiln dried, 3/4-5/4" thick, 3 1/2-15" wide, 8', 10', 12' long, approx. 4100 BF

475
Rough Cut Mixed Species Lumber
Kiln dried, 3/4-1" thick, 3-10" wide, 10' and 16' long, approx. 4600 BF

476
Assorted Hardwood Flooring and Rough Cut Lumber
Flooring: 3/4" thick, T and G, kiln dried, 3-8" wide, 12-16' long, approx. 1300 BF; Lumber: kiln dried, mixed species, 1" thick, 4-12" wide, 12' and 16' long, approx. 1300 BF

477
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 3-7" wide, mostly 11' long, approx. 1900 BF

478
Rough Cut Mixed Species Lumber
Kiln dried, 3/4-5/4" thick, 3" wide, 19' long, approx. 200 BF
Photo Gallery







Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Sponsored Links

Rock Hill Lumber - Sawmill Equipment - Culpeper, VA

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
2727 Leon Road
Culpeper, VA 22701
Sale Dates and Times
Friday Jun 21, 2024 Completed
Sale Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  2. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  3. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  4. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  5. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  6. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  7. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  2. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  3. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  4. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  5. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  6. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  7. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  8. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  9. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  10. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  11. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  12. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  13. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  14. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  15. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  16. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  17. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
  2. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
  3. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  4. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  5. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  6. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
  7. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  2. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  3. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  4. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  5. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  6. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  7. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  8. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  9. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  10. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

 
Listing Details
Post-Covid labor challenges have prompted the seller to put the business on the market. Rock Hill Lumber Business & Real Estate is for sale as a complete operation until May 15. If no legitimate offer is received by then, the equipment will be auctioned on June 21.

00
Information Lot
Accepting Consignments!!
Type of Auction: Sawmill and Rolling Stock
Highlight Pieces: Featuring a top-notch Linebar Resaw, an almost new Mellott drop saw trimmer system, a modern electrical system, a 2021 Taylor industrial loader T1023 with under 1000 hours, a 2022 Kenworth W900L tractor, and 50 brand-new band saw blades.
Auction Specialist: Zach Kittrell 931-224-0699
Auction Manager: Kevin Nisley 574-202-6154

Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with.

 

01
Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: June 20, 2024 or by appointment from 9am to 4pm Zach Kittrell 931-224-0699

Location: 2727 Leon Rd, Culpeper, VA 22701

02
Loadout Information
Bright Star Staff will provide free loadout of smalls and uninstalled equipment on Friday until 6pm, Saturday, June 22, 9-4 and from 06/24/24-06/26/24 from 8am-4pm, Call Kevin Nisley with questions at 574-202-6154. After 06/26 all loadout will have to be made by appointment with the rigger at the buyer's expense.
 

03
Rigging Information
RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. 

Recommended Rigger: Wesley Worrell 804-241-5320 wesleyworrell62@icloud.com
 

04
Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 
 

90
Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

91
Heavy Equipment Key Set 36 Keys
Shipping available for $20

92
SDRTOP Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

93
Brand New 36" Cant Hook

94
New Banding Tools
Brand new strapping tool, crimper, and band cutter for 3/4-1 1/4" steel banding

95
New Banding Tools
Brand new strapping tool, crimper, and band cutter for 3/4-1 1/4" steel banding

96
New Banding Tool
Strapping tool for up to 3/4" poly, made by Cord Strap

97
Lincoln Cordless Grease Gun
Includes case, charger, and (2) 2.5 AH 20V batteries

98
Hydraulic Body Frame Repair Kit
Brand new, never used! 10 ton capacity

99
Plastic Log Stamps
2" x 4" plastic stamps, includes hammer

100
HMC V-2110 Rosser Head Debarker
(1st of an entirety) SN: 2110-1699-98, 4' x 4' x 78" cab with AC unit and all controls, includes hydraulic pack under cab, 3" x 24" bull wheels, 4" shafts, air cylinders on kickers, 8' x 40' overall, 75 hp electric motor on head, Air cylinder on head

101
3 Strand Log Deck with Stop'n'Load
(Part of an entirety) Hydraulic cylinder on loading arm, hydraulic drive with Tulsa gearbox, H78 chain, includes support steel to ground, rub rail, strand without chain, 17'6" x 16'6" overall

102
Barn Sweep
(Part of an entirety) Electric drive, 14" paddles, 44" x 30' flat section, 30' incline section, includes support steel, does not include slide pans

103
HMC Debarker Entirety of Lots 100-102
With 10% raise

103A
Debarker Parts
Extra head-ready to mount and use, brand new head positioning air cylinder, (3) sections of 3/8" cable, extra set of teeth and end shoes for head

104
Filer and Stowell 4 HB Carriage and Track
(1st of an entirety) 10' x 20', 4 axle, 1 1/4" air dogs, Tong Dog, Paw Taw John computerized setworks, includes all controls in cab, includes pantograph, track is 61" center to center, 60' long track, includes support steel to ground, does not include carriage drive or idler pullies; HB spacing: 1st to 2nd-6', 2nd to 3rd-54", 3rd to 4th-4'

104
Filer and Stowell 4 HB Carriage and Track
(1st of an entirety) 10' x 20', 4 axle, 1 1/4" air dogs, Tong Dog, Paw Taw John computerized setworks, includes all controls in cab, includes pantograph, track is 61" center to center, 60' long track, includes support steel to ground, does not include carriage drive or idler pullies; HB spacing: 1st to 2nd-6', 2nd to 3rd-54", 3rd to 4th-4'

105
Carriage Drive and Feed
(Part of an entirety) 200 hp electric motor, has cooling unit, Eurodrive gearbox, spool of 3/4" braided cable, includes idler pullies mounted on track

106
Jacobson Carriage Drive Control Panels
(Part of an entirety) (2) Allen Bradly ACS 600 Inverted modules

107
72" Bar Type Log Turner
(Part of an entirety) hydraulic cylinder and drive

107A
25hp Hydraulic Pack
(Part of an entirety) 27" x 60" x 16" tank, includes all hydraulic lines and hoses to equipment

107B
Greer Hydraulic Accumulator
(Part of an entirety) Electric drive, 10 gallon tank, includes all hydraulic lines and hoses to equipment

108
Sawyer's Cab
(Part of an entirety) Does not include any controls inside cab, 4' x 8'6" x 7' tall, has AC unit

109
Filer and Stowell 4 HB Carriage Entirety of Lots 104-108
With 10% raise

110
Letson and Burpee 7' Headrig
W0-653, BM-2776, 10.5" x 7' wheels, 1 1/4" mead on top wheel, air strain, lineal positioning cylinder, does not include electric drive, 30" x 6' slat off bear with electric drive

110A
Jacobson Carriage Drive Control Panel Parts
Crate with electrical parts for lot #106

111
Electric Motor
250 hp, 460V, 1180 rpm, 505UZ frame

112
Saftronics Soft Start
SN: 172608, 250 hp, 460V

113
50hp Hydraulic Pack
24" x 60" x 30" tank, includes all hydraulic lines and hoses to equipment

114
Hydraulic Pack
Approx. 50 hp motor but tag is missing, 24" x 60" x 24" tank, includes spill tray, includes all hydraulic lines and hoses to equipment

115
Slab Dump
Electric drive, 24" belt, 42" x 12', air cylinder on dump

116
5 Strand Log Deck with Stop'n'Load
Hydraulic drive, H78 chain, 17' x 27' plus 5' nose skids, includes rub rail on side, includes support steel to first cross member

117
Roll Case
12" x 36" rolls, 36" spacing, includes (3) 8.5" x 24" rolls by nose skids, 5' x 43', electric drive, air cylinder on pop-ups and stops, includes support steel to ground, air cylinder on kickers

118
Letson and Burpee 7' Resaw
(1st of an entirety) W0-699, BM-2777, 12" x 7' wheels, 1 1/8" mead on top wheel, lineal positioning cylinder, air strain, includes power feed rolls, does not include main electric drive, 10" x 42" feed rolls, 6' x 15' power feed rolls, fully hydraulic, includes pressure gauge bank, includes all controls in cab, includes Paw Taw John computerized setworks

118
Letson and Burpee 7' Resaw
(1st of an entirety) W0-699, BM-2777, 12" x 7' wheels, 1 1/8" mead on top wheel, lineal positioning cylinder, air strain, includes power feed rolls, does not include main electric drive, 10" x 42" feed rolls, 6' x 15' power feed rolls, fully hydraulic, includes pressure gauge bank, includes all controls in cab, includes Paw Taw John computerized setworks

119
Electric Motor
(Part of an entirety) 250 hp, 1200 rpm, 460V, 505UZ frame

120
Benshaw Soft Start
(Part of an entirety) SN: PGH004235, 480V, up to 300 hp, 120V control

121
Infeed Roll Case
(Part of an entirety) 7' x 22", 10" x 42" rolls, 32" spacing, 4 strand pop-up transfer, air cylinders on pop-ups and board stops, hydraulic cylinders on width adjustment, hydraulic drive

122
Outfeed Roll Case
(Part of an entirety) Hydraulic drive, 10.5" x 42" rolls, 34" spacing, 4' x 10'6" 4 strand pop-up transfer, includes shaft shared with lot 123, air cylinders on pop-ups and board stops

123
5 Strand Transfer Deck
(Part of an entirety) Electric drive, H78 chain, 5' x 12'6", does not include shaft shared with lot 122

124
Roll Case
(Part of an entirety) 4' x 73' overall, has 2 electric drives, 18' section with 12" x 36" rolls, 36" spacing, 8.5" x 36" rolls, 32" spacing

125
5 Strand Transfer Deck
(Part of an entirety) Electric drive, H78A rooftop chain, 12' x 15', includes steel plate and rub rail on side, air cylinder on cant stop

126
Roll Case
(Part of an entirety) 5'6" x 24'6", 10.5" x 42" rolls, 32" spacing, 2 way pop-up chain turners, hydraulic drive, hydraulic cylinders on pop-up, includes guard plate at end of roll case

127
50 hp Hydraulic Pack
(Part of an entirety) SN: 21852JF, 150 gallon tank, 42" x 60" x 25" tank, includes all hydraulic lines and hoses to equipment

128
50 hp Hydraulic Pack
(Part of an entirety) 3' x 5' x 2' tank, includes all hydraulic lines and hoses to equipment

129
15 hp Hydraulic Pack
(Part of an entirety) 26" x 45" x 23" tank, includes all hydraulic lines and hoses to equipment

130
Operator's Cab
(Part of an entirety) 7' x 8'6" x 7' tall, has AC, does not include any controls, Includes catwalk steps to cab

131
Letson and Burpee Resaw with Runaround System Entirety of Lots 118-130
With 10% raise

131A
Guide Grinder
Includes 4 aluminum blocks (used on head rig-lot #110) and 4 steel blocks (used on resaw-lot #118), grinder mount, 110V plug-in router/grinder

132
5 Strand Transfer Deck
Feed deck for Runaround system, H78A rooftop chain, electric drive, air cylinder on cant loading arm, 16'6" x 30', includes support steel to ground

133
Roll Case
10" x 48" rolls, 30" spacing, 68" x 27', electric drive, includes support steel to first cross member

134
5 Strand Transfer Deck
Roller chain, electric drive, 12'6" x 10'6" overall, 32" section of tipple arms with air cylinders, includes support steel to first cross member

135
Schurman Gang Edger
(1st of an entirety) Does not include main electric drive, 4" x 48" capacity, electric drive on feed rolls, includes control panel, air cylinders on press down rolls, single arbor, (4) 22" blades-all moveable, (4) laser lights, includes support steel to first cross member, Includes lubrication system panel

136
Electric Motor
(Part of an entirety) 125 hp, 460V, 405T frame, 1760 rpm

137
Saftronics Soft Start
(Part of an entirety) SN: 1-172606, SN #2: 2-166596, 200-600V, 180 amp

137A
Motor Control Panel
(Part of an entirety) Control panel for saw setworks

138
Schurman Infeed Roll Case
(Part of an entirety) SN: 2592A, 8' x 20', includes support steel to first cross member, 8 1/2" x 47" rolls, 36" spacing, 6 strand 2 way transfer, electric drive on rolls, hydraulic drive on transfer, air cylinders on pop-ups, includes air valves mounted to roll case

139
Outfeed Roll Case
(Part of an entirety) 6' x 22', electric drive, includes support steel to first cross member, 8 1/2" x 54' rolls, 24-36" spacing, includes plate steel cover to end of rollcase

140
10hp Hydraulic Pack
(Part of an entirety) 18" x 32" x 16" tank, includes all hydraulic hoses and lines to equipment

141
Schurman Gang Edger Entirety of Lots 135-140
With 10% raise

141A
Gang Edger Blades
(8) 20" blades, 6 1/2" arbor, freshly sharpened or new,

142
Roll Case
Electric drive, 6 1/2" x 24" rolls, 24" spacing, 30" x 42", air cylinders on pop-ups and board stops, includes support steel to first cross member

143
4 Strand Transfer Deck
H78 chain, electric drive, includes support steel to first cross member, 11' x 12' total, 3' section on top of roll case

144
4 Strand Transfer Deck
Electric drive, 8' x 11', 2' section on roll case, air cylinder on cant loading arm, includes support steel to first cross member

145
Edmiston 2 Blade Edger
SN: HE291E, made in 1996, (2) 16" blades-both moveable, hydraulic controls, 4" x 30" capacity, laser lights, 50 hp electric drive, 12" x 24" x 18" hydraulic tank, 3' x 8'6" infeed rolls, 6" x 24' tailing belt outfeed, includes support steel to first cross member

145A
Edger Blades
(8) 16" split blades, 3 1/4" arbor, freshly sharpened or new

146
Saftronics Soft Start
SN: 172566, SN #2: 166536, 50hp, 460V, 65 amp, 180A, 200-600V

147
McDonough 54" Band Resaw
(1st of an entirety) SN: 54-1013SL, 7 1/4" x 54" band wheels, 7/8" mead on top wheel, weight strain, includes control panel and Paw Taw John computerized setworks, does not include main electric drive, includes power feed and infeed rolls, hydraulic drive and cylinders on power feed rolls, 8 1/2" x 24" rolls, 80" x 27' infeed total, 2 way transfer cant turners, air cylinders on board pushers

148
Electric Motor
(Part of an entirety) 75 hp, 365T frame, 460V, 1780 rpm

149
Saftronics Soft Start
(Part of an entirety) SN: 172567, SN #2: 166513, 75 hp, 460V, 96A, 200-600V, 180A

150
Outfeed Roll Case
(Part of an entirety) Electric drive, 8" x 30" rolls, 30" spacing, 45" x 29', includes support steel to first cross member, air cylinders on cant kicker and board stops

151
3 Strand Transfer Deck
(Part of an entirety) 90" x 10', electric drive, roller chain, air cylinder on cant loading arm, includes support steel to first cross member

152
Roll Case
(Part of an entirety) 8" x 24" rolls, 36" spacing, 38" x 40', electric drive, includes support steel to first cross member

153
4 Strand Transfer Deck
(Part of an entirety) H-130 rooftop chain, electric drive, air cylinder on loading arm, 10'6" x 13', includes support steel to first cross member

154
10 hp Hydraulic Pack
(Part of an entirety) 18" x 36" x 18" tank, includes all hydraulic lines and hoses to equipment

155
5 hp Hydraulic Pack
(Part of an entirety) 14" x 24" x 12" tank, includes all hydraulic lines and hoses to equipment

156
McDonough 54" Resaw with Runaround System Entirety of Lots 147-155
With 10% raise

156A
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156B
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156C
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156D
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156E
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156F
Bands
(4) 6 1/2" x 26', fit lot 147, 17 gauge, smooth back, sharpened

156G
Guide Grinder
Includes 8 blocks, grinding mount, 110 plug-in router/grinder, used for lot #147

157
3 Strand Transfer Deck
Electric drive, 9' x 32', includes support steel to ground

158
5 Strand Transfer Deck
Electric drive, H78A rooftop chain, 18'6" x 23', includes support steel to first cross member

159
4 Strand Transfer Deck
Electric drive, H78A rooftop chain, 11' x 10'6", includes support steel to first cross member

160
4 Strand Transfer Deck
Electric drive, H78A rooftop chain, 9' x 31', includes support steel to first cross member

161
3 Strand Transfer Deck
Electric drive, C55B rooftop chain, 10' x 20'6", includes support steel to first cross member

162
5 Strand Unscrambler
Electric drive, 7' x 12', includes support steel to first cross member

163
Mellott 9 Head Drop-Saw Trimmer with Sorting Deck
Electric drive, air cylinders on heads, includes control panel and electrical panel, 28" blades, 7' x 27' x 8' tall overall, 9' x 16' 8 strand sorting deck, roller chain with pegs, 6 1/2" x 30" dead rolls, in like new condition, only in production for approx. 2 years

163
Mellott 9 Head Drop-Saw Trimmer with Sorting Deck
Electric drive, air cylinders on heads, includes control panel and electrical panel, 28" blades, 7' x 27' x 8' tall overall, 9' x 16' 8 strand sorting deck, roller chain with pegs, 6 1/2" x 30" dead rolls, in like new condition, only in production for approx. 2 years

163A
Trim Saw Blades
9 blades, 1 1/4" arbor, 28" blades, all sharpened and ready to use

163B
Trim Saw Parts
Fits lot #163, brand new 81X roller chain for feed deck, poly pegs for chain, head brackets (marked as 357)

164
Saftronics Soft Start
SN: 172559, SN #2: 166665, 50 hp, 460V, 65AAC, 180A, 200-600V, used on lot #163

165
3 Strand Green Chain
Electric drive, roller chain, 10' x 75'

166
Dead Rolls
30" x 19', 4 1/2" x 24" rolls, 30" spacing

167
Dead Rolls
30" x 18', 4 1/2" x 24" rolls, 30" spacing

168
Dead Rolls
30" x 19', 4 1/2" x 24" rolls, 30" spacing

169
Rollers
Approx. 100 pieces 6-8 1/2" x 42" long, includes all rollers around green chain

170
Box Fans
(7) 36" box fans-hung from ceiling by green chain, 110V plug-ins

171
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

172
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

173
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

174
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

175
Electric Stihl Chainsaws
(2) MSE220 chainsaws, (1) 18" bar, (1) 16" bar, 220V plug-ins

176
Precision 66" 6-Knife Chipper
(1st of an entirety) SN: C-3154, size: 66x18, does not include electric drive, includes chip chute to cyclone, Includes full set of sharpened knives in lot #182( Knife Grinder)

177
Electric Motor
(Part of an entirety) 200 hp, 460V, 1770 rpm, 445T frame

178
Saftronics Soft Start
(Part of an entirety) SN: 172557, SN #2: 166562, 200 hp, 240Acc, 460V, 250A, 200-600V

179
Precision Shaker Screen and Cyclone
(Part of an entirety) Electric drive, 5' x 10' screen, 2" x 2" chip holes, 4' x 6' cyclone

180
36" Chip Blower
(Part of an entirety) 40 hp-460V electric drive, 10" x 16" top feed-includes slide chute, triple loading chutes

181
Precision Chipper Entirety of Lots 176-180
With 10% raise

181A
New Main Chipper Bearing
Brand new, feed side bearings, SKF brand, still in box

181B
Chipper Knives
(4) brand new 4" x 21 1/2" knives, (5) full sets of 6 knives-sharpened and ready to use, 13 knives that need sharpened, 47 knives total, includes 2 jigs

182
Precision Knife Grinder
Holds 6 knives-up to 22" long, electric drive, Does not include knives in grinder

183
Webster Vibrating Conveyor
Electric drive, 24" pan, 10" sides, includes chipper infeed section, fines section, and fiberglass section, 39" x 48'

184
MDI Metal Detector
Includes control panel

185
Webster Vibrating Conveyor
Electric drive, 24" pan, 10" sides, 39" x 83', does not include slide pan

186
Webster Vibrating Conveyor
Electric drive, 24" pan, 10" sides, 39" x 20', located under trim saw

187
Belt Conveyor
2' x 29', 20" pan, 6" sides, 16" belt, electric drive

188
Chain Conveyor
Electric drive, 11" ladder back chain, 13" pan, 6" sides, 20" x 48'

189
Dust Auger
14" auger, electric drive, 2' x 36'

208
Diesel Fuel Tank
64" x 12' long, Fill-Rite, 115V, fuel pump with nozzle

190
3 Van Auger Loading System
Electric drive, (1) 27' x 14" distribution auger, (3) 12" x 35' loading augers, 40' x 40' overall, includes control panel, and all support steel to ground

191
Dust Auger
12" auger, electric drive, 18" x 24', does not include slide pans

192
Dust Auger
12" auger, electric drive, 18" x 21'6", no slide pan included

193
Barn Sweep
Located under head rig, electric drive, 10" paddles, 34" x 11' decline section, 4' flat section

194
North Star Air Compressor
80 gallon vertical tank, 7 1/2 hp electric motor, includes disconnect boxes

195
Chain Conveyor
Electric drive, 11" ladderback chain, 14" pan, 5" sides, 22" x 42'6"

196
Chain Conveyor
Electric drive, 11" ladderback chain, 14" pan, 5" sides, 2' x 65', does not include slide pans

197
Bands
Fit lots 110 and 118, (5) 10" x 43'4", sliverback, sharpened, 14 gauge

198
Bands
Fit lots 110 and 118, (6) 11" x 43'4", sliverback, sharpened, 14 gauge

199
Bands
Fit lots 110 and 118, Brand New, (6) 10" x 43'4", sliverback, 14 gauge

200
Bands
Fit lots 110 and 118, Brand New, (6) 10" x 43'4", smooth back, 14 gauge

201
Bands
Fit lots 110 and 118, (5) 10" x 43'4", smooth back, sharpened, 14 gauge

202
Bands
Fit lots 110 and 118, (5) 10" x 43'4", sliverback, sharpened, 14 gauge

203
Bands
Fit lots 110 and 118, Brand New, (6) 10" x 43'4", smooth back, 14 gauge

204
Bands
Fit lots 110 and 118, Brand New, (5) 12" x 43'4", smooth back, 14 gauge

204A
Bands
Fits lots 110 and 118, (3) 10" x 43'4", 17 gauge, used, 2 sliverback, 1 smooth back

205
Saftronics Soft Start
SN: 172603, SN #2: 166561, 200 hp, 460V, 240 Acc, 250A, 200-600V, uninstalled, located in Jacobson Control Panel room

206
Cat 3508 Genset
Generator SN: 3EN00510, fuel type: Diesel, 1800 rpm, engine was rebuilt at 24838 hours, 900 kw, 1125 KVA, 480V, 3 ph, (4) 24V batteries, 7' x 14' x 8'6" tall overall, includes exhaust pipe

207
Cat 3512 Genset
Generator SN: 6NA03570, fuel type: Diesel, 1800 rpm, 1000 kw, 1250 KVA, 480V, 3 ph, (4) 24V batteries, Includes exhaust pipe

209
Cutler-Hammer Powerline Switchboard
(2) 2000 amp switches, 480V, includes conduit from gensets to switchboard to motor control panels

210
15W-40 Oil
(2) partial barrels of 15W-40 motor oil, includes hand pumps

213
Kaeser CSD 100ST Air Compressor
SN: 1004, made in 2003, 460V, 125 psig, 100 hp electric motor, 425 cfm, includes air line from compressor to tank, includes disconnect box

214
Vertical Air Tank
40" x 9' tall, includes all air line from tank to equipment, includes Kaeser water evaporator and air filters mounted in air line

215
Cutler-Hammer Freedom Series 2100 Motor Control Center
480V, 3 ph, 600 amps/section, 13 sections, 2' x 23' x 93" tall overall, includes conduit from control center to 1st junction box above control center

216
Cutler-Hammer Powerline Switchboard
2000 supply amps, 600 VAC, 3 pole, 480V, 1600 amp max switch, includes conduit from switchboard to 1st junction box above switchboard

217
Cutler Hammer Freedom Series 2100 Motor Control Center
480V, 3 ph, 600 amp, single section

218
Asco Auto Power Transfer Switch
SN: 497192RE, Series 300, 240V, single phase, includes (2) 100 amp disconnects, includes dry type, 480V to 240V transformer, includes junction box as marked, includes wire in box, includes extra auto transfer switch box, includes conduit from panels to 1st junction box and from panels to transformer

219
480V Panels and Transformer
480V breaker panel, Aegis SP225 Surge suppressor, Cutler hammer dry type transformer, 480V to 240V, 200 amp disconnect panel, includes conduit from panel to transformer and from panels to 1st junction box

220
Conduit
Includes all conduit and wire from all electrical panels to equipment not lotted otherwise, includes all junction boxes in building, 1' of conduit to be left on motors and starter panels, does not include any 110V conduit or panel, does not include electronic control wiring for setworks etc. Only include wiring inside conduit and junction boxes

221
110V Electrical
Includes all 110V breaker panels and conduit in building, includes all 110V lighting, includes junction box in electrical room as marked, includes 460V transformer

222
Cabinet with Electrical Components
19' x 42' x 67" tall, includes all contents, breakers, switches, controls, control boards, starters

223
Cabinet with Electrical Components
18" x 36" x 75" tall, includes all contents, fuses, switches, breakers, etc.

224
Structural Steel
Includes all support steel, slide pans, and catwalk in building not lotted otherwise, Including all large I-Beams under back half of mill(Under Resaw and Shurman Edger) were originally supports for a highway overpass, does not include any supports needed for the building itself

225
Wheelbarrow and Hand Tools
10 cubic yard 2 tire wheelbarrow, shovels, cant hook, broom, fork, sledge hammer

226
Wheelbarrow and Hand Tools
10 cubic yard 2 tire wheelbarrow, shovels, cant hook, broom, fork, sledge hammer

227
Wheelbarrow and Hand Tools
10 cubic yard 2 tire wheelbarrow, shovels, cant hook, broom, fork, sledge hammer

228
Pipe Wrenchers
(1) Ridgid 48", (1) Ridgid 36"

229
Hand Tools
Shovels, broom, cant hook, sledge hammer

230
Hand Tools
Shovels, scraper, cant hooks

231
Hand Tools
Shovels, cant hook, sledge hammer

231A
Ridgid 300-12 Pipe Threader
SN: ED63283F00, 115V plug-in, 36 rpm, foot pedal control, on stand, Includes 2 new sets of teeth

232
Workbench with Tools
35" x 88" x 38" tall, includes all tools and parts on bench and pegboard, 3 1/2" bench vise, includes 2 air hose reels mounted beside bench, Extension cords

233
Floor Fans
(1) 36" by gang edger, (1) 24" by gang edger, (1) 28" by head rig, (1) 36" by trimsaw

234
Hand Tools
Shovels, broom, sledgehammer, scraper, located by green chain

235
Hand Tools
Shovels, broom, cant hook, sledge hammer, splitting maul, located by green chain

235A
Extension Cord Reel
220V cord, 600V, 35 amp, located by green chain

235B
Extension Cord Reel
220V cord, 600V, 35 amp, located by green chain

236
Dip Tank
6' x 20' x 78" deep, includes hydraulic pack for power, includes electrical control panel

237
Salem 11 Head Drop Saw Trimmer
Electric drive, no saws installed, air cylinders on head, 5' x 28' x 8'6" tall overall, uninstalled, feed deck included but not attached, includes (22) 26" blades-some sharpened, includes PCL electrical control panel, includes control panel

238
Salem Sorting Deck
8" x 24" rolls, 12' x 24', 11 strand, no chain installed on 2 strands-includes chain to install, no drive, uninstalled

239
Dead Rolls
30" x 19', 4 1/2" x 24" rolls, 30" spacing, no legs

240
Mellott 5 Strand Unscrambler
Electric drive, 7' x 12' x 4' tall, uninstalled

241
Roll Case
No drive, 64" x 22', 10 1/2" x 48" rolls, 30" spacing, uninstalled

242
Webster Vibrating Conveyor
No drive, uninstalled, 24" pan, 10" flared sides, 39" x 16'3"

243
McDonough 54" Band Resaw
SN: 54-880, no drive, uninstalled, 7 1/4" x 54" wheels, 7/8" mead on top wheel, top wheel needs mounting hole, recalibrated/machined, includes gearboxes/electric motors, pallet as marked

244
G.E. AC/DC Carriage Drive
SN: 3855-G, 250 hp, 460V, 1180 rpm electric motor, 200 kw unit, 200 amps, empty wire spool for up to 1' cable, includes 24" blower with electric drive

245
Carriage Idler Pullies
2 1/2" x 47" pullies-hold up to 1 1/4" cable, mounted on frame, 3' x 6' x 54" tall overall

246
Miller "Big 40" Welder/Generator
SN: HH079911, 40V, 100 amp, welding range-15-400, 4 cylinder gas motor. Ran when put into storage-but engine had a knock

247
Lumber End Sprayer
57" x 69" x 60" tall, dual sprayers with 110V plug-ins, includes 2 partial barrels of end paint

248
Dip Tank Mixer
110V plug-in, used to keep dip tank stirred

249
Crane Mat Drilling Machine
100V plug-in, Milwaukee Super Hole Shooter 3/4" drill, includes (2) 1" x 7' drill bits, mounted on castors

250
Mohawk LMF-12 Car Lift
SN: 9201116, 12000 lbs capacity, powered by 2 hp, 220/440V hydraulic pack, 7" x 12" x 21" hydraulic pack, uninstalled, includes disconnect box

251
Mohawk LMF-12 Car Lift
SN: 9201117, 12000 lbs capacity, powered by 2 hp, 220/440V hydraulic pack, 7" x 12" x 21" hydraulic pack, uninstalled, includes disconnect box

255
2021 Taylor T1023 Wheel Loader
SN: P-45538 (PIN: CLG848HZLLL620368).
Meter reads: 1,716 hours.
Engine: Cummins QSB6.7-173 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 25".
Operating capacity: 34,710 lbs.
Tire Size: 20.5R25.
Attachments: None included.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Has backup camera, joystick control, and air ride seat. Runs and operates flawlessly. Has full warranty from Taylor to 10,000 hours or 01/27/2032.

255A
Rockland Grapple Forks
SN: 199823, Model: LFW, mounted on lot #255, 7" x 48" forks, 6' wide, quick attach

256
2014 Volvo L70G Wheel Loader
SN: VCE0L70GE0S614348.
Meter reads: 11,195 hours.
Engine: Volvo D6H (SN: 11586949)-154 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 20".
Operating weight: 30,730 lbs.
Tire Size: 20.5R25.
Attachments: None included.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Hydraulic cylinder with button control to open engine bay. Has backup camera and air-ride seat. Starts, runs, and operates great!

256A
Craig Grapple Forks
SN: T14110059, mounted on lot #256, weight: 3840 lbs, 6" x 48" forks, 75" wide, quick attach

257
2007 Komatsu WA-200 PT-5 Wheel Loader
SN: 68753 (PIN: KMTWA052L01068753).
Meter reads: 11,382 hours.
Engine: Komatsu 5.9L (SN: 26400039)-128 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 18".
Operating weight: 25,800 lbs.
Tire Size: 20.5R25.
Attachments: JRB forks, 6" x 48", 64" wide
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Starts, runs, and operates good. This loader is being reserved on the seller's behalf until 6/28/24 to assist with loadout. Possession and ownership of this machine will transfer to the new buyer on the above listed date. Payment for this machine is due on the above listed date. Seller warrants the machine will be insured and in the same condition as it was on auction day. There may be some additional hours on the meter.

258
2006 Komatsu WA320-5L Wheel Loader
SN: A32761 (PIN: KMTWA028C57A32761).
Meter reads: 17,528 hours.
Engine: Komatsu 5.9L (SN: 46572138)-171 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 26".
Operating weight: 24,360 lbs.
Tire Size: 20.5R25.
Attachments: JRB pin through grapple forks-7" x 45", 78" wide.
Heater: Yes.
A/C: Yes.
Quick Attach: No.

Features and Notes: Starts, runs, and operates good

259
2009 Komatsu WA320 PZ-6 Wheel Loader
SN: 70643 (PIN: KMTWA108K01070643).
Meter reads: 20,377 hours
Engine: Komatsu SAA6D107E (SN: 26555462)-171 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 28".
Operating weight: 21,150 lbs.
Tire Size: 20.5R25.
Attachments: JRB pin through grapple forks-7" x 42", 78" wide.
Heater: Yes.
A/C: Yes.
Quick Attach: No.

Features and Notes: Starts, runs, and operates good

260
JRB Quick Attach Loader Bucket
Model: WA250, SN: 0705-162177-176, was used on lot   # 257-Komatsu WA-200 PT, 38" x 104" x 44" tall

265
1997 John Deere 550G LGP Series IV Dozer
SN: T0550GL831846.
Meter reads: 3,714 original hours.
Engine: 4 cylinder John Deere.
Fuel type: Diesel.
Blade: 10' 6 way.
ROPS: Open cab.
A/C: No.
Heater: No.

Features and Notes: 24" tracks, John Deere winch with 1" cable, Forestry package, power shift transmission, Foot steering. Starts, runs, and operates strong.

268
2000 Barko 885B Feller Buncher*
SN: 22785, Meter read: 7532 hours, with 22" cutter head

269
22" Cutter Head*
Can fit 885B Feller Buncher

270
2005 Prentice 280D Knuckleboom
SN: D280PR59806.
Meter reads: 4,289 hours.
Engine: 6 cylinder Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes, 48" max.
Trailer: Evans.
Delimber: None.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes

Features and Notes: 11R22.5 tires, pilot joystick controls. Starts, runs, and operates. 

271
CTR Bucksaw
Model: CTR-50-MAXIE, SN: 50-181, 64" x 17'6" rack, 48" bar, direct drive

275
2022 Kenworth W900 Truck
VIN #: 1XKWD49X7NR173429.
Meter reads: 97,057 original miles
Engine: Cummins X15 (SN: 80381993).
HP: 565.
Transmission: 18 speed Eaton Fuller.
GVWR: 53,200 lbs.
Front axle rating: 13,200 lbs.
Rear axle rating: 20,000 lbs.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R22.5 tires, 60" sleeper, New batteries installed 11/2023. Starts and runs well! Under full warranty from Kenworth until 500,000 miles or 12/27/2026. Has title.
 

276
2003 Peterbilt 379 Truck
VIN #: 1XP5D49X03D802786.
Meter reads: 181,406 miles-rolled over once.
Engine: Cummins ISX (SN: 60810341).
HP: 600.
Transmission: 10 speed Eaton Fuller.
GVWR: 50,000 lbs.
Front axle rating: 12,000 lbs.
Rear axle rating: 19,000 lbs each.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R24.5 tires, 48" sleeper, less than 200,000 miles on engine-was installed by Cummins, less than 300,000 miles on new transmission and rear end. Starts and runs good. Has title.

277
2000 Peterbilt 379 Truck
VIN #: 1XP5DB9X8YN508915.
Meter reads: 601,080 original miles
Engine: Cat C15 (SN: 6NZ03703).
HP: 475.
Transmission: 10 speed Eaton Fuller.
GVWR: 50,000 lbs.
Front axle rating: 12,000 lbs.
Rear axle rating: 19,000 lbs.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R24.5 tires, day cab. Starts and runs good. Has title. 

278
2017 Kenworth W900 Truck
VIN #: 1XKWD49X8HJ139874.
Meter reads: 607,598 miles.
Engine: Cummins ISX15 (SN: 79898058).
HP: 550.
Transmission: 18 speed Eaton Fuller.
GVWR: 53,200 lbs.
Front axle rating: 13,200 lbs.
Rear axle rating: 20,000 lbs. each.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R24.5 tires, 48" sleeper. New batteries on 5/17/2024. Starts and runs. Very nice clean truck. Has title. Needs new head gasket or potentially more work done to head

280
2007 Fontaine Phantom Flatbed Trailer
VIN #: 1R1F348287K570792.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps, toolbox under deck, aluminum trailer. Has title.

281
2007 Fontaine Phantom Flatbed Trailer
VIN #: 1R1F348207K570754.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding rims, includes sliding straps, toolbox under deck, aluminum trailer. Has title.

282
2006 Reitnouer MaxLite Flatbed Trailer
VIN #: 1RNF48A226R011645.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps, aluminum trailer. Has title. 

283
2006 Reitnouer MaxLite Flatbed Trailer
VIN #: 1RNF48A206R011630.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps, aluminum trailer. Has title.

284
1997 Fontaine Ultra Flatbed Trailer
VIN #: 13N145309V1575034.
GVWR: 80,000 lbs.
Length: 45'.
Width: 8'.
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps. Has title.

285
1998 Fontaine Ultra Flatbed Trailer
VIN #: 13N145309W1579893.
GVWR: 80,000 lbs.
Length: 45'.
Width: 8'.
Tires:11R24.5.

Features and Notes: Steel rims, missing 2 tires, includes sliding straps, missing several lights. Has title. 

290
1985 Shop Built 4 Bunk Log Trailer
VIN: VA181140TR.
Length: 40'.
Bunk size: 87" wide x 85" tall.
Bunk spacing: 11'.
Tires: 11R22.5.
No title, bill of sale only.

295
1988 Great Dane Chip Van Trailer
VIN #: 1GRAA9024JS057238.
GVWR: 65,000 lbs.
Length: 42'.
Inside width: 88".
Inside height: 102".
Tires: 295/75R22.5.

Features and Notes: Half door in rear-hinged at top. No title, bill of sale only.
 

296
1984 Fruehauf Chip Van Trailer
VIN #: 1H2V04825EC003542.
GVWR: 68,000 lbs.
Length: 45'.
Inside width: 98".
Inside height: 112".
Tires: 11R22.5.

Features and Notes: Holes cut in rear doors for chip-chutes. No title, bill of sale only.

297
1977 Fruehauf Chip Van Trailer
VIN: MEY529991.
GVWR: 68,000 lbs.
Length: 45'.
Inside width: 96".
Inside height: 102".
Tires: 11R24.5.

Features and Notes: No rear door. No title, bill of sale only.

298
1974 Miller Open Top Chip Trailer
VIN: Y2080813.
GVWR: 73,950 lbs.
Length: 40'.
Inside width: 92".
Inside height: 92".
Tires: 295/75R22.5.
No title, bill of sale only.

299A
Rol-Lift Pallet Jack
SN: E2914637, 6" x 48" forks, 4500 lbs capacity

299B
Whitco Power Washer
Model: 4200, SN: PL01844, 220 plug-in, diesel powered heater, includes wand and 25' of pressure hose

300
Security Camera System
Includes control box and monitor in women's bathroom in break room building, includes all cameras in mill building and break room

301
Lockers
(3) sections located in break room, (1) 18" x 36" x 78" tall, (1) 18" x 48" x 78" tall, (1) 18" x 60" x 78" tall

302
Emergency Eye Wash Station
Located in break room, includes first aid kit on wall

303
Lathem Time Clock Machine
110V plug-in, includes time card holders

304
New WEG Electric Motor
5 hp, 460V, 3 ph, 182/4T frame, 1750 rpm

305
New WEG Electric Motor
5 hp, 460V, 3 ph, 182/4T frame, 1750 rpm

306
New WEG Electric Motor
7 1/2 hp, 460V, 3 ph, 182/4T frame, 1750 rpm

307
New WEG Electric Motor
3 hp, 182/4T frame, 1765 rpm, 460V, 3 ph

308
New WEG Electric Motor
7 1/2 hp, 213/5T frame, 3 ph, 1765 rpm, 460V

309
Air Compressor
Mounted on 4' x 90" skid unit, includes gas jug and 2 hoses, mounted to unit, Predator 420cc gas motor, 20" x 4' horizontal tank

310
V-Groove Pulley
21", 10 groove, 6 1/2" arbor

311
Ridgid Pipe Threader
110V plug-in, foot pedal control; condition unknown

312
Willis Drill Press
Model: SENR7, SN: 3717, 3 ph electric motor-110V plug-in, 18" x 18" table top, Heavy Duty

313
WEG Electric Motor
3 ph, 75 hp, 1775 rpm, 460V, rewound, 364/5T frame

314
Westinghouse Electric Motor
250 hp, 1775 rpm, 445T frame, 460V, 13 1/2" 8 groove pulley, mounted on steel frame was used to run old circle mill, was in good working condition, when put into storage

315
Toshiba Electric Motor
125 hp, 1760 rpm, 405T frame, 460V, rewound

316
Westinghouse Electric Motor
50 hp, 1770 rpm, 326T frame, 460V, rewound

317
Electric Motors
(3) 5 hp motors, 4 gearboxes

318
7 1/2hp Hydraulic Pack
SN: 89A028, 10 gpm, 460V, 2000 max psi, 26" x 48" x 12" tank

319
Electric Motors
(1) 7 1/2 hp, 460V, 1165 rpm, (1) 10 hp, 460V, 1730 rpm with gearbox

320
Babbitt Bearing Machines
Used to make bushings for lot #135, air powered press, 110V surfacer, includes melting ladle

321
Guide Dressing Machine
110V plug-in, includes steel blocks and wood dressing blocks

322
Guide Grinder Dressing Blocks
30 pieces, 2" x 3 1/2" x 12", flat

323
Guide Grinder Dressing Blocks
16 pieces, 1 5/8" x 2" x 10", grooved

324
Guide Grinder Dressing Blocks
13 pieces, 1 1/8" x 1 1/4" x 7", grooved

325
WEG Electric Motor
75 hp, 1775 rpm, 364/5T frame, 460V, rewound

326
Electric Motors and Gearboxes
7 1/2 hp motor with drive for vibrating conveyor, gearbox, 7 1/2 hp motor, 5 hp motor

327
Electric Motor
20 hp, 230/460V, 3652 frame, mounted on frame

328
Electric Motor
25 hp, 1800 rpm, 460V, rewound

329
Teco Electric Motor
200 hp, 1180 rpm, 460V, 447TZ frame, was used on AC/DC carriage drive, was in good running condition when taken out

330
Toshiba Electric Motor
200 hp, 1770 rpm, 460V, 445T frame, rewound

331
GE Electric Motor
250 hp, 1175 rpm, 440V, 8155Z frame, rewound

332
Electric Panels
460V panels with switches and breakers, breaker panel box, 600 amp disconnect box

333
Electric Panels
Motor control center with starters/disconnects, breaker panel

334
Silvatech Carriage Setworks
Brand new control panel with all wiring needed, includes extra boxes and parts, complete setworks

335
Tempo Sonic Sensors
(4) 24" sensors, (5) 32" sensors, new laser light

336
Banner Laser Scanner Bar
Model: MAHE26A, includes wiring, 2 bars

337
Banding Supplies
Banding tools, clips, cardboard corners, poly corner protectors

338
Banding Cart and Banding Tools
2 full and 1 partial roll of 1 1/4" steel banding, strapping tool, crimper, snips

339
Skid of 3/4" Poly Banding
1640' per roll, 12 full rolls, 3 boxes of clips, 500 clips/box

340
Banding
3 full and 1 partial roll of 5/8" poly banding, 4 boxes and 1 bucket of clips

341
Banding
12 full rolls of 3/4" steel banding, 5 gallon bucket of clips

342
Banding
4 full rolls of 3/4" steel banding, plastic tote of clips

343
Banding Cart
No banding, includes strapping tool and crimper

344
Banding Cart
No banding, missing 1 wheel, strapping tool and crimper

345
Banding Cart
Partial roll of 3/4" steel banding, strapping tool and crimper

346
Banding Cart
No banding, crimper and strapping tool

347
Banding Cart
Partial roll of 3/4" steel banding, strapping tool, crimper, snips

348
Banding Tools
Assorted Strapping Tools, cutters, extra parts

349
Brand New Banding Tools
Strapping tool and crimper, for steel banding up to 3/4"

350
Brand New Banding Tools
Strapping tool and crimper, for steel banding up to 3/4"

351
Brand New Banding Tools
Strapping tool and crimper, for steel banding up to 3/4"

351A
Banding Tools
Assorted styles, crimpers, strapping tools

352
MDI Metal Detector
Brand new control panel, includes detector and 5' fiberglass conveyor section, 18" pan, 10" flared sides

353
Poly Sheets
(2) 4' x 10' x 1/4", (1) 4' x 10' x 3/8", 2 thick strips

354
Assorted Poly Strips

355
Screen for Chip Shaker
In 2 pieces, 5' x 8' total, 2" holes

356
Pallet of Chain
(31) 10' sections of new C55B rooftop chain, roll of 28" steel slats

358
Rolls
(1) 12" x 36", (1) 10 1/2" x 42", (1) 8 1/2" x 36", (1) 8 1/2" x 24", shaft parts

359
Conveyor Belts
(1) 40", (1) 30", (2) 24", (1) 14", (1) 16", lengths unknown

360
Pallet of Chain
(4) 10' sections of new WH78 chain

361
Fluids
(14) 1 gallon jugs of bar and chain oil, (2) 3 gallon jugs of 22 Express anti mold

362
Pallet of Chain
(10) 10' sections of new H78 chain

363
Wire Spool
Partial spool of wire

364
Pallet of Chain
(14) 10' sections of H78A rooftop chain, mostly new, some gear roller chain

365
Parts for Milling Machine
Wrenches and dies

366
2-Way Cant Turner
Used in roll cases for runaround system, hydraulic drive

367
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367A
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367B
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367C
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367D
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367E
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367F
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367G
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367H
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367I
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367J
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367K
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367L
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367M
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367N
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367O
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

42039667

368
Braided Carriage Cable
Full set of 3/4" cable-2 long and 2 short, plus extra partial spool of 1/2" cable

369
Crate of Motors and Gearboxes
Misc. 3-10 hp motors, gearboxes, parts

370
56" Circle Saw
F7 style, good condition

371
56" Circle Saw
F7 style, good condition

372
56" Circle Saw
No bits or shanks, was broken and repaired

373
54" Circle Saw
F72 style, good condition

374
54" Circle Saw
F7 style, good condition

375
Assorted Braided Cable
3/4", 3/8", 1/2", 5/8"

376
Steel Rods
Were used for crane mats, 1" pipe-(16) 20' pieces, includes hand tools to add threading

377
Lights
Dome style ceiling lights

378
Tarps
3 pieces, size unknown, 2 very large ones, steel cover

379
Banding Tools
Assorted styles, crimpers, strapping tools

380
New Conedrive Gearbox
Model: HU50-1, 5:1 ratio, 1750 input rpm, includes extra parts

381
Assorted Tools
Electric cord reel, assorted hand tools, work lights, extension cord, Yale 3/4 ton chain hoist

382
Hydraulic Cylinders
Assorted sizes, hydraulic hoses, good condition

383
Electric Motors and Gearboxes
Drive for vibrating conveyor, misc. gearboxes, 3-10 hp motors

384
Lincoln Electric Motor
30 hp, 1755 rpm, 460V, 286T frame, rewound

385
Toshiba Electric Motor
7 1/2 hp, 460V, 1750 rpm, 213T frame, rewound

386
Pallet of Grease
Aeroshell 16 grease, was used as 5th wheel grease, (29) 5 gallon buckets full

387
Vibrating Conveyor Fiberglass Section
40" x 5', 24" pan, 10" flared sides

388
Beacon Contractor's Mix Grass Seed
(9) full 50 lbs bags, 1 partial bag

389
Jockey Grinder
Mounted on Milwaukee drill

390
Jockey Grinder
Model: 85H, mounted on Milwaukee grinder

391
Jockey Grinder
Mounted on Milwaukee drill

392
Jones Saw Grinder
Model: 6M, SN: 6858K, mounted on drill

393
Jockey Grinder Discs
(39) brand new Simonds discs, dressing blocks, extra parts

394
Circle Saw Tooth Setters
4 setters, box of clips

395
Shanks and Bits
Box of assorted new circle saw bits and shanks

396
Pallet of Grease
Aeroshell 22 grease, was used as 5th wheel grease, Aeroshell 33 grease, some buckets, some tubes

397
Pallet of Grease
Aeroshell 22 grease, was used as 5th wheel grease, Aeroshell 33 grease, some buckets, some tubes

398
Floor Fan
30", on stand, 110V plug-in

399
Floor Fan
40", on castors, 110V plug-in

400
Floor Fan
40", on castors, 110V plug-in

401
Ladderback Chain
Brand new, 12", (5) 10' sections

402
Ladderback Chain
New-never installed, just sat for several years, 12" (5) 10' sections

403
Electrical Panels
Several control panels, junction box, brand new Cutler Hammer box-empty

404
Pallet of Assorted Wire

405
Hydraulic Hoses
Assorted hoses, big hoses for carriage drive, some brand new hoses, hydraulic radiator unit, (4) pieces of 3/4" x 10' steel, hydraulic line

406
Pallet of Misc.
28" floor fan, hand tools, assorted air hose, ratchet straps

407
Rollers
8 1/2" x 48", 15 pieces

408
Catwalk Sections
(9) 2' x 20' sections, assorted smaller pieces

409
Kiln Carts
Approx. 60 sets, no cross members, 6' long

410
Shelf of Chain
All brand new, 20-1600 and 20-1640 roller chain, 81X chain, 20-1760 roller chain, 20-1740 chain, H74, H60, H78 chain, pegs for chain H130 and H78B rooftop chain, includes all chain on shelf, does not include shelf or contents of top shelf

411
Shelf of Parts
Flex conduit, conduit fittings, wiry, misc. parts, includes all contents of shelf as marked

412
Shelf of Parts
Shingles, new dome lights, lots of brand new small roller chain, 40' of new #120 RIV chain, 30 of new GS 100 RIV chain, Tulsa Gearbox, pulleys, roller, guards, includes all contents of shelf except pipe on top shelf

413
End-Paint Sprayer
395 ST Pro paint sprayer, 110V plug-in, 1 full and 1 approx. 3/4 full barrel of Anchor seal spray

414
Crate of Electrical
Lots of assorted wire, conduit fittings, includes conduit pipe on top of shelf #412, includes conduit beside crate

415
Shelf of Parts
Junction boxes, pulleys, sprockets, bearings, electric motors, hydraulic cylinders and valves, Accumulator tanks, assorted fittings for carriage

416
Shelf of Parts
Lots of chipper parts-nuts and bolts, counter knives, knife holders, (4) laser lights-condition unknown, laser light brackets, window AC unit, 18" conveyor belt, new emergency eyewash station, electrical components, rubber bump stop

417
Genset Radiator
For Cat 3412 Genset, 2 piece radiator

418
Edger Feed Rolls
3 1/2" x 30" rolls, rebuilt, fit Edmiston edger

419
Trim Saw Blades
(8) 26", (2) 24" all 1 1/2" arbor, all sharpened

420
Shelf of Parts
Light bulbs, lots of electrical, switches, breakers, boxes, disconnects, motor mount frames, Partial Barrel of Essentia Lube

421
Shelf of Parts
18" x 45" x 75" shelf with all contents, assorted fluids, cordless grease guns, threaded rod, cylinder, includes rods and hand tools against end of shelf

422
Shelf of Parts
18" x 45" x 75" shelf with all contents, bottle jacks, truck parts, hand cleaner, bearings, washers-flat and lock, laser light brackets, threaded rods

423
Shelf of Parts
18" x 45" x 75" shelf with all contents, hydraulic motors and cylinders, hydraulic fittings, cotter pin assortment hydraulic tank heaters, banding tools, Mac Valve packing kits, Parker Drip Lube Kits

424
Shelf of Parts
18" x 45" x 75" shelf with all contents, air and hydraulic cylinders, hydraulic motors, gearboxes, valves, air bladders, debarker parts, bearings, safety gear

425
Shelf of Parts
18" x 45" x 75" shelf with all contents, assorted filters, hydraulic valves, sprockets, pulleys, bushings, conduit fittings, coil springs for vibrating conveyor

426
Shelf of Parts
18" x 45" x 75" shelf with all contents, bearings, bushings, sheaves, shafts, new shelving

427
Fire Extinguishers
11 pieces, assorted sizes

428
Shelf with Parts
18" x 45" x 75" shelf with all contents, Flexco belt lacing and belt lacing tool, roller chain, pegs for chain, filters

429
Shelf with Parts
18" x 45" 75" shelf with all contents, lots of new small size roller, chain, chain parts and master links, key stock, carriage parts, assorted fasteners

430
Shelf with Parts
12" x 36" x 75" shelf with all contents, hand held pipe threader with 3 dies, tap and die kit, thread repair kit

431
Bolt Bin Organizers
12" x 36" x 64" total-2 sections, includes all contents and contents on top of organizer

432
Steel Workbench
32" x 9' x 42" tall, does not include bench vise or bench grinder, (2) organizers, assorted hand tools, includes pegboard and all contents of pegboard, oil waste can

433
Wilton 10" Bench Grinder
Model: 180, SN: P9520, 115V plug-in

434
Olympia 6" Bench Vise

435
Shelf of Parts
Misc. nuts and bolts, fluids, air filters, parts for lube systems, safety signs, 4' level

436
Shelf of Parts
Bearings, sprockets, O-rings, copper tubing, fittings,

437
Shelf of Parts
(5) brand new 18" broom, heads, air valves, parts and fittings, nails, covers, laser light, hydraulic hose cover, carriage wheel

438
Battery Charger
Single cylinder gas motor, includes cables, condition unknown

439
Cabinet with Welding Parts
2' x 3' x 78" tall, lots of welding rods, mask, tank saugers, cutting torch, pop rivet tools

440
Cabinet with Parts
20" x 2' x 3' tall, assorted welding parts, assorted wire, wear plate for carriage, shaft stock

441
Amrox Drill Press
Model: AF12, 5/8 chuck capacity, JT-3 spindle, 110V plug-in, includes 2 boxes of bits, and vise clamp

442
Continental 30 Ton Shop Press
Model: HV100, frame rated for 30 ton, 50 ton bottle jack

443
Hand Tools
Includes all hand tools hanging from wall, grease guns, wire, jumper cables, flex magnet, oil can, U-bolts, filter wrenches

444
Assorted Motor Belts
Includes all belts hanging on wall in lower level of mill building, includes pallet of belts, lots of brand new belts

445
Mandrel Shaft
2 7/16" x 16'8"

450
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

451
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

452
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

453
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

454
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1350 pieces

455
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

456
4x4's
(100) 3" x 4" x 8' long

457
4x4's
(100) 3" x 4" x 8' long

458
4x4's
(116) 3" x 4" x 8' long

459
4x4's
(100) 3" x 4" x 8' long

460
4x4's
(100) 3" x 4" x 8' long

461
Rough Cut Lumber
Mixed species, kiln dried, approx. 180 BF, 3/4" thick

462
Assorted Hardwood Flooring
T and G, 8-12' long, 4-7" wide includes trim, approx. 750 BF kiln dried, 3/4" thick

463
Assorted Hardwood Flooring
5-7" wide, 8-15' long, T and G, kiln dried, approx. 3000 BF, 3/4" thick

464
Assorted Hardwood Flooring
4-6" wide, 9-12' long, T and G, kiln dried, approx. 2800 BF, 3/4" thick

465
Rough Cut Mixed Species Lumber
Kiln dried, 1" thick, 4-12" wide, 12' and 14' long, approx. 2000 BF

465A
Assorted Hardwood Flooring
3/4" thick, 4-7" wide, 8-12' long kiln dried, approx. 1600 BF T and G

466
Rough Cut Mixed Species Lumber
Kiln dried, 3 1/2-12" wide, 1" thick, approx. 3000 BF, 8', 14', 16' long

467
Assorted Hardwood Flooring
3/4" thick, 4-8" wide, kiln dried, includes some trim, 10' long, approx. 2500 BF, T and G

468
Assorted Hardwood Flooring
3/4" thick, kiln dried, T and G, 3-8" wide, 10' long, approx. 2600 BF

469
Assorted Hardwood Flooring
4-5" wide, 3/4" thick, T and G, kiln dried, 14'6" long, approx. 1200 BF of flooring, includes approx. 350 BF of rough cut kiln dried lumber on top of flooring

470
Rough Cut Mixed Species Lumber
Kiln dried, 1 1/2-2 1/2" thick, 4-16" wide, 10'6"-12' long, approx. 750 BF

471
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 2"-8" wide, 8'-11' long, approx. 1700 BF

472
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 8-12' long, 4-6" wide, approx. 2600 BF

473
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 2-8" wide, 8-11' long, approx. 1200 BF

474
Rough Cut Mixed Species Lumber
Kiln dried, 3/4-5/4" thick, 3 1/2-15" wide, 8', 10', 12' long, approx. 4100 BF

475
Rough Cut Mixed Species Lumber
Kiln dried, 3/4-1" thick, 3-10" wide, 10' and 16' long, approx. 4600 BF

476
Assorted Hardwood Flooring and Rough Cut Lumber
Flooring: 3/4" thick, T and G, kiln dried, 3-8" wide, 12-16' long, approx. 1300 BF; Lumber: kiln dried, mixed species, 1" thick, 4-12" wide, 12' and 16' long, approx. 1300 BF

477
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 3-7" wide, mostly 11' long, approx. 1900 BF

478
Rough Cut Mixed Species Lumber
Kiln dried, 3/4-5/4" thick, 3" wide, 19' long, approx. 200 BF
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Rock Hill Lumber - Sawmill Equipment - Culpeper, VA
 Live Auction
 
Auction Date(s)
Friday Jun 21, 2024 Completed
Auction Location

Culpeper, VA 22701
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  2. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  3. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  4. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  5. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  6. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  7. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  2. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  3. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  4. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  5. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  6. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  7. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  8. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  9. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  10. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  11. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  12. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  13. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  14. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  15. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  16. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  17. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
  2. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
  3. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  4. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  5. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  6. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
  7. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  2. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  3. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  4. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  5. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  6. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  7. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  8. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  9. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  10. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

 
Post-Covid labor challenges have prompted the seller to put the business on the market. Rock Hill Lumber Business & Real Estate is for sale as a complete operation until May 15. If no legitimate offer is received by then, the equipment will be auctioned on June 21.

00
Information Lot
Accepting Consignments!!
Type of Auction: Sawmill and Rolling Stock
Highlight Pieces: Featuring a top-notch Linebar Resaw, an almost new Mellott drop saw trimmer system, a modern electrical system, a 2021 Taylor industrial loader T1023 with under 1000 hours, a 2022 Kenworth W900L tractor, and 50 brand-new band saw blades.
Auction Specialist: Zach Kittrell 931-224-0699
Auction Manager: Kevin Nisley 574-202-6154

Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with.

 

01
Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: June 20, 2024 or by appointment from 9am to 4pm Zach Kittrell 931-224-0699

Location: 2727 Leon Rd, Culpeper, VA 22701

02
Loadout Information
Bright Star Staff will provide free loadout of smalls and uninstalled equipment on Friday until 6pm, Saturday, June 22, 9-4 and from 06/24/24-06/26/24 from 8am-4pm, Call Kevin Nisley with questions at 574-202-6154. After 06/26 all loadout will have to be made by appointment with the rigger at the buyer's expense.
 

03
Rigging Information
RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. 

Recommended Rigger: Wesley Worrell 804-241-5320 wesleyworrell62@icloud.com
 

04
Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 
 

90
Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

91
Heavy Equipment Key Set 36 Keys
Shipping available for $20

92
SDRTOP Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

93
Brand New 36" Cant Hook

94
New Banding Tools
Brand new strapping tool, crimper, and band cutter for 3/4-1 1/4" steel banding

95
New Banding Tools
Brand new strapping tool, crimper, and band cutter for 3/4-1 1/4" steel banding

96
New Banding Tool
Strapping tool for up to 3/4" poly, made by Cord Strap

97
Lincoln Cordless Grease Gun
Includes case, charger, and (2) 2.5 AH 20V batteries

98
Hydraulic Body Frame Repair Kit
Brand new, never used! 10 ton capacity

99
Plastic Log Stamps
2" x 4" plastic stamps, includes hammer

100
HMC V-2110 Rosser Head Debarker
(1st of an entirety) SN: 2110-1699-98, 4' x 4' x 78" cab with AC unit and all controls, includes hydraulic pack under cab, 3" x 24" bull wheels, 4" shafts, air cylinders on kickers, 8' x 40' overall, 75 hp electric motor on head, Air cylinder on head

101
3 Strand Log Deck with Stop'n'Load
(Part of an entirety) Hydraulic cylinder on loading arm, hydraulic drive with Tulsa gearbox, H78 chain, includes support steel to ground, rub rail, strand without chain, 17'6" x 16'6" overall

102
Barn Sweep
(Part of an entirety) Electric drive, 14" paddles, 44" x 30' flat section, 30' incline section, includes support steel, does not include slide pans

103
HMC Debarker Entirety of Lots 100-102
With 10% raise

103A
Debarker Parts
Extra head-ready to mount and use, brand new head positioning air cylinder, (3) sections of 3/8" cable, extra set of teeth and end shoes for head

104
Filer and Stowell 4 HB Carriage and Track
(1st of an entirety) 10' x 20', 4 axle, 1 1/4" air dogs, Tong Dog, Paw Taw John computerized setworks, includes all controls in cab, includes pantograph, track is 61" center to center, 60' long track, includes support steel to ground, does not include carriage drive or idler pullies; HB spacing: 1st to 2nd-6', 2nd to 3rd-54", 3rd to 4th-4'

104
Filer and Stowell 4 HB Carriage and Track
(1st of an entirety) 10' x 20', 4 axle, 1 1/4" air dogs, Tong Dog, Paw Taw John computerized setworks, includes all controls in cab, includes pantograph, track is 61" center to center, 60' long track, includes support steel to ground, does not include carriage drive or idler pullies; HB spacing: 1st to 2nd-6', 2nd to 3rd-54", 3rd to 4th-4'

105
Carriage Drive and Feed
(Part of an entirety) 200 hp electric motor, has cooling unit, Eurodrive gearbox, spool of 3/4" braided cable, includes idler pullies mounted on track

106
Jacobson Carriage Drive Control Panels
(Part of an entirety) (2) Allen Bradly ACS 600 Inverted modules

107
72" Bar Type Log Turner
(Part of an entirety) hydraulic cylinder and drive

107A
25hp Hydraulic Pack
(Part of an entirety) 27" x 60" x 16" tank, includes all hydraulic lines and hoses to equipment

107B
Greer Hydraulic Accumulator
(Part of an entirety) Electric drive, 10 gallon tank, includes all hydraulic lines and hoses to equipment

108
Sawyer's Cab
(Part of an entirety) Does not include any controls inside cab, 4' x 8'6" x 7' tall, has AC unit

109
Filer and Stowell 4 HB Carriage Entirety of Lots 104-108
With 10% raise

110
Letson and Burpee 7' Headrig
W0-653, BM-2776, 10.5" x 7' wheels, 1 1/4" mead on top wheel, air strain, lineal positioning cylinder, does not include electric drive, 30" x 6' slat off bear with electric drive

110A
Jacobson Carriage Drive Control Panel Parts
Crate with electrical parts for lot #106

111
Electric Motor
250 hp, 460V, 1180 rpm, 505UZ frame

112
Saftronics Soft Start
SN: 172608, 250 hp, 460V

113
50hp Hydraulic Pack
24" x 60" x 30" tank, includes all hydraulic lines and hoses to equipment

114
Hydraulic Pack
Approx. 50 hp motor but tag is missing, 24" x 60" x 24" tank, includes spill tray, includes all hydraulic lines and hoses to equipment

115
Slab Dump
Electric drive, 24" belt, 42" x 12', air cylinder on dump

116
5 Strand Log Deck with Stop'n'Load
Hydraulic drive, H78 chain, 17' x 27' plus 5' nose skids, includes rub rail on side, includes support steel to first cross member

117
Roll Case
12" x 36" rolls, 36" spacing, includes (3) 8.5" x 24" rolls by nose skids, 5' x 43', electric drive, air cylinder on pop-ups and stops, includes support steel to ground, air cylinder on kickers

118
Letson and Burpee 7' Resaw
(1st of an entirety) W0-699, BM-2777, 12" x 7' wheels, 1 1/8" mead on top wheel, lineal positioning cylinder, air strain, includes power feed rolls, does not include main electric drive, 10" x 42" feed rolls, 6' x 15' power feed rolls, fully hydraulic, includes pressure gauge bank, includes all controls in cab, includes Paw Taw John computerized setworks

118
Letson and Burpee 7' Resaw
(1st of an entirety) W0-699, BM-2777, 12" x 7' wheels, 1 1/8" mead on top wheel, lineal positioning cylinder, air strain, includes power feed rolls, does not include main electric drive, 10" x 42" feed rolls, 6' x 15' power feed rolls, fully hydraulic, includes pressure gauge bank, includes all controls in cab, includes Paw Taw John computerized setworks

119
Electric Motor
(Part of an entirety) 250 hp, 1200 rpm, 460V, 505UZ frame

120
Benshaw Soft Start
(Part of an entirety) SN: PGH004235, 480V, up to 300 hp, 120V control

121
Infeed Roll Case
(Part of an entirety) 7' x 22", 10" x 42" rolls, 32" spacing, 4 strand pop-up transfer, air cylinders on pop-ups and board stops, hydraulic cylinders on width adjustment, hydraulic drive

122
Outfeed Roll Case
(Part of an entirety) Hydraulic drive, 10.5" x 42" rolls, 34" spacing, 4' x 10'6" 4 strand pop-up transfer, includes shaft shared with lot 123, air cylinders on pop-ups and board stops

123
5 Strand Transfer Deck
(Part of an entirety) Electric drive, H78 chain, 5' x 12'6", does not include shaft shared with lot 122

124
Roll Case
(Part of an entirety) 4' x 73' overall, has 2 electric drives, 18' section with 12" x 36" rolls, 36" spacing, 8.5" x 36" rolls, 32" spacing

125
5 Strand Transfer Deck
(Part of an entirety) Electric drive, H78A rooftop chain, 12' x 15', includes steel plate and rub rail on side, air cylinder on cant stop

126
Roll Case
(Part of an entirety) 5'6" x 24'6", 10.5" x 42" rolls, 32" spacing, 2 way pop-up chain turners, hydraulic drive, hydraulic cylinders on pop-up, includes guard plate at end of roll case

127
50 hp Hydraulic Pack
(Part of an entirety) SN: 21852JF, 150 gallon tank, 42" x 60" x 25" tank, includes all hydraulic lines and hoses to equipment

128
50 hp Hydraulic Pack
(Part of an entirety) 3' x 5' x 2' tank, includes all hydraulic lines and hoses to equipment

129
15 hp Hydraulic Pack
(Part of an entirety) 26" x 45" x 23" tank, includes all hydraulic lines and hoses to equipment

130
Operator's Cab
(Part of an entirety) 7' x 8'6" x 7' tall, has AC, does not include any controls, Includes catwalk steps to cab

131
Letson and Burpee Resaw with Runaround System Entirety of Lots 118-130
With 10% raise

131A
Guide Grinder
Includes 4 aluminum blocks (used on head rig-lot #110) and 4 steel blocks (used on resaw-lot #118), grinder mount, 110V plug-in router/grinder

132
5 Strand Transfer Deck
Feed deck for Runaround system, H78A rooftop chain, electric drive, air cylinder on cant loading arm, 16'6" x 30', includes support steel to ground

133
Roll Case
10" x 48" rolls, 30" spacing, 68" x 27', electric drive, includes support steel to first cross member

134
5 Strand Transfer Deck
Roller chain, electric drive, 12'6" x 10'6" overall, 32" section of tipple arms with air cylinders, includes support steel to first cross member

135
Schurman Gang Edger
(1st of an entirety) Does not include main electric drive, 4" x 48" capacity, electric drive on feed rolls, includes control panel, air cylinders on press down rolls, single arbor, (4) 22" blades-all moveable, (4) laser lights, includes support steel to first cross member, Includes lubrication system panel

136
Electric Motor
(Part of an entirety) 125 hp, 460V, 405T frame, 1760 rpm

137
Saftronics Soft Start
(Part of an entirety) SN: 1-172606, SN #2: 2-166596, 200-600V, 180 amp

137A
Motor Control Panel
(Part of an entirety) Control panel for saw setworks

138
Schurman Infeed Roll Case
(Part of an entirety) SN: 2592A, 8' x 20', includes support steel to first cross member, 8 1/2" x 47" rolls, 36" spacing, 6 strand 2 way transfer, electric drive on rolls, hydraulic drive on transfer, air cylinders on pop-ups, includes air valves mounted to roll case

139
Outfeed Roll Case
(Part of an entirety) 6' x 22', electric drive, includes support steel to first cross member, 8 1/2" x 54' rolls, 24-36" spacing, includes plate steel cover to end of rollcase

140
10hp Hydraulic Pack
(Part of an entirety) 18" x 32" x 16" tank, includes all hydraulic hoses and lines to equipment

141
Schurman Gang Edger Entirety of Lots 135-140
With 10% raise

141A
Gang Edger Blades
(8) 20" blades, 6 1/2" arbor, freshly sharpened or new,

142
Roll Case
Electric drive, 6 1/2" x 24" rolls, 24" spacing, 30" x 42", air cylinders on pop-ups and board stops, includes support steel to first cross member

143
4 Strand Transfer Deck
H78 chain, electric drive, includes support steel to first cross member, 11' x 12' total, 3' section on top of roll case

144
4 Strand Transfer Deck
Electric drive, 8' x 11', 2' section on roll case, air cylinder on cant loading arm, includes support steel to first cross member

145
Edmiston 2 Blade Edger
SN: HE291E, made in 1996, (2) 16" blades-both moveable, hydraulic controls, 4" x 30" capacity, laser lights, 50 hp electric drive, 12" x 24" x 18" hydraulic tank, 3' x 8'6" infeed rolls, 6" x 24' tailing belt outfeed, includes support steel to first cross member

145A
Edger Blades
(8) 16" split blades, 3 1/4" arbor, freshly sharpened or new

146
Saftronics Soft Start
SN: 172566, SN #2: 166536, 50hp, 460V, 65 amp, 180A, 200-600V

147
McDonough 54" Band Resaw
(1st of an entirety) SN: 54-1013SL, 7 1/4" x 54" band wheels, 7/8" mead on top wheel, weight strain, includes control panel and Paw Taw John computerized setworks, does not include main electric drive, includes power feed and infeed rolls, hydraulic drive and cylinders on power feed rolls, 8 1/2" x 24" rolls, 80" x 27' infeed total, 2 way transfer cant turners, air cylinders on board pushers

148
Electric Motor
(Part of an entirety) 75 hp, 365T frame, 460V, 1780 rpm

149
Saftronics Soft Start
(Part of an entirety) SN: 172567, SN #2: 166513, 75 hp, 460V, 96A, 200-600V, 180A

150
Outfeed Roll Case
(Part of an entirety) Electric drive, 8" x 30" rolls, 30" spacing, 45" x 29', includes support steel to first cross member, air cylinders on cant kicker and board stops

151
3 Strand Transfer Deck
(Part of an entirety) 90" x 10', electric drive, roller chain, air cylinder on cant loading arm, includes support steel to first cross member

152
Roll Case
(Part of an entirety) 8" x 24" rolls, 36" spacing, 38" x 40', electric drive, includes support steel to first cross member

153
4 Strand Transfer Deck
(Part of an entirety) H-130 rooftop chain, electric drive, air cylinder on loading arm, 10'6" x 13', includes support steel to first cross member

154
10 hp Hydraulic Pack
(Part of an entirety) 18" x 36" x 18" tank, includes all hydraulic lines and hoses to equipment

155
5 hp Hydraulic Pack
(Part of an entirety) 14" x 24" x 12" tank, includes all hydraulic lines and hoses to equipment

156
McDonough 54" Resaw with Runaround System Entirety of Lots 147-155
With 10% raise

156A
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156B
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156C
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156D
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156E
Bands
(5) 6 1/2" x 26', fits lot # 147, 17 gauge, smooth back, sharpened

156F
Bands
(4) 6 1/2" x 26', fit lot 147, 17 gauge, smooth back, sharpened

156G
Guide Grinder
Includes 8 blocks, grinding mount, 110 plug-in router/grinder, used for lot #147

157
3 Strand Transfer Deck
Electric drive, 9' x 32', includes support steel to ground

158
5 Strand Transfer Deck
Electric drive, H78A rooftop chain, 18'6" x 23', includes support steel to first cross member

159
4 Strand Transfer Deck
Electric drive, H78A rooftop chain, 11' x 10'6", includes support steel to first cross member

160
4 Strand Transfer Deck
Electric drive, H78A rooftop chain, 9' x 31', includes support steel to first cross member

161
3 Strand Transfer Deck
Electric drive, C55B rooftop chain, 10' x 20'6", includes support steel to first cross member

162
5 Strand Unscrambler
Electric drive, 7' x 12', includes support steel to first cross member

163
Mellott 9 Head Drop-Saw Trimmer with Sorting Deck
Electric drive, air cylinders on heads, includes control panel and electrical panel, 28" blades, 7' x 27' x 8' tall overall, 9' x 16' 8 strand sorting deck, roller chain with pegs, 6 1/2" x 30" dead rolls, in like new condition, only in production for approx. 2 years

163
Mellott 9 Head Drop-Saw Trimmer with Sorting Deck
Electric drive, air cylinders on heads, includes control panel and electrical panel, 28" blades, 7' x 27' x 8' tall overall, 9' x 16' 8 strand sorting deck, roller chain with pegs, 6 1/2" x 30" dead rolls, in like new condition, only in production for approx. 2 years

163A
Trim Saw Blades
9 blades, 1 1/4" arbor, 28" blades, all sharpened and ready to use

163B
Trim Saw Parts
Fits lot #163, brand new 81X roller chain for feed deck, poly pegs for chain, head brackets (marked as 357)

164
Saftronics Soft Start
SN: 172559, SN #2: 166665, 50 hp, 460V, 65AAC, 180A, 200-600V, used on lot #163

165
3 Strand Green Chain
Electric drive, roller chain, 10' x 75'

166
Dead Rolls
30" x 19', 4 1/2" x 24" rolls, 30" spacing

167
Dead Rolls
30" x 18', 4 1/2" x 24" rolls, 30" spacing

168
Dead Rolls
30" x 19', 4 1/2" x 24" rolls, 30" spacing

169
Rollers
Approx. 100 pieces 6-8 1/2" x 42" long, includes all rollers around green chain

170
Box Fans
(7) 36" box fans-hung from ceiling by green chain, 110V plug-ins

171
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

172
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

173
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

174
Banding Cart
Partial roll of 3/4" poly, banding, clips, strapping tool

175
Electric Stihl Chainsaws
(2) MSE220 chainsaws, (1) 18" bar, (1) 16" bar, 220V plug-ins

176
Precision 66" 6-Knife Chipper
(1st of an entirety) SN: C-3154, size: 66x18, does not include electric drive, includes chip chute to cyclone, Includes full set of sharpened knives in lot #182( Knife Grinder)

177
Electric Motor
(Part of an entirety) 200 hp, 460V, 1770 rpm, 445T frame

178
Saftronics Soft Start
(Part of an entirety) SN: 172557, SN #2: 166562, 200 hp, 240Acc, 460V, 250A, 200-600V

179
Precision Shaker Screen and Cyclone
(Part of an entirety) Electric drive, 5' x 10' screen, 2" x 2" chip holes, 4' x 6' cyclone

180
36" Chip Blower
(Part of an entirety) 40 hp-460V electric drive, 10" x 16" top feed-includes slide chute, triple loading chutes

181
Precision Chipper Entirety of Lots 176-180
With 10% raise

181A
New Main Chipper Bearing
Brand new, feed side bearings, SKF brand, still in box

181B
Chipper Knives
(4) brand new 4" x 21 1/2" knives, (5) full sets of 6 knives-sharpened and ready to use, 13 knives that need sharpened, 47 knives total, includes 2 jigs

182
Precision Knife Grinder
Holds 6 knives-up to 22" long, electric drive, Does not include knives in grinder

183
Webster Vibrating Conveyor
Electric drive, 24" pan, 10" sides, includes chipper infeed section, fines section, and fiberglass section, 39" x 48'

184
MDI Metal Detector
Includes control panel

185
Webster Vibrating Conveyor
Electric drive, 24" pan, 10" sides, 39" x 83', does not include slide pan

186
Webster Vibrating Conveyor
Electric drive, 24" pan, 10" sides, 39" x 20', located under trim saw

187
Belt Conveyor
2' x 29', 20" pan, 6" sides, 16" belt, electric drive

188
Chain Conveyor
Electric drive, 11" ladder back chain, 13" pan, 6" sides, 20" x 48'

189
Dust Auger
14" auger, electric drive, 2' x 36'

208
Diesel Fuel Tank
64" x 12' long, Fill-Rite, 115V, fuel pump with nozzle

190
3 Van Auger Loading System
Electric drive, (1) 27' x 14" distribution auger, (3) 12" x 35' loading augers, 40' x 40' overall, includes control panel, and all support steel to ground

191
Dust Auger
12" auger, electric drive, 18" x 24', does not include slide pans

192
Dust Auger
12" auger, electric drive, 18" x 21'6", no slide pan included

193
Barn Sweep
Located under head rig, electric drive, 10" paddles, 34" x 11' decline section, 4' flat section

194
North Star Air Compressor
80 gallon vertical tank, 7 1/2 hp electric motor, includes disconnect boxes

195
Chain Conveyor
Electric drive, 11" ladderback chain, 14" pan, 5" sides, 22" x 42'6"

196
Chain Conveyor
Electric drive, 11" ladderback chain, 14" pan, 5" sides, 2' x 65', does not include slide pans

197
Bands
Fit lots 110 and 118, (5) 10" x 43'4", sliverback, sharpened, 14 gauge

198
Bands
Fit lots 110 and 118, (6) 11" x 43'4", sliverback, sharpened, 14 gauge

199
Bands
Fit lots 110 and 118, Brand New, (6) 10" x 43'4", sliverback, 14 gauge

200
Bands
Fit lots 110 and 118, Brand New, (6) 10" x 43'4", smooth back, 14 gauge

201
Bands
Fit lots 110 and 118, (5) 10" x 43'4", smooth back, sharpened, 14 gauge

202
Bands
Fit lots 110 and 118, (5) 10" x 43'4", sliverback, sharpened, 14 gauge

203
Bands
Fit lots 110 and 118, Brand New, (6) 10" x 43'4", smooth back, 14 gauge

204
Bands
Fit lots 110 and 118, Brand New, (5) 12" x 43'4", smooth back, 14 gauge

204A
Bands
Fits lots 110 and 118, (3) 10" x 43'4", 17 gauge, used, 2 sliverback, 1 smooth back

205
Saftronics Soft Start
SN: 172603, SN #2: 166561, 200 hp, 460V, 240 Acc, 250A, 200-600V, uninstalled, located in Jacobson Control Panel room

206
Cat 3508 Genset
Generator SN: 3EN00510, fuel type: Diesel, 1800 rpm, engine was rebuilt at 24838 hours, 900 kw, 1125 KVA, 480V, 3 ph, (4) 24V batteries, 7' x 14' x 8'6" tall overall, includes exhaust pipe

207
Cat 3512 Genset
Generator SN: 6NA03570, fuel type: Diesel, 1800 rpm, 1000 kw, 1250 KVA, 480V, 3 ph, (4) 24V batteries, Includes exhaust pipe

209
Cutler-Hammer Powerline Switchboard
(2) 2000 amp switches, 480V, includes conduit from gensets to switchboard to motor control panels

210
15W-40 Oil
(2) partial barrels of 15W-40 motor oil, includes hand pumps

213
Kaeser CSD 100ST Air Compressor
SN: 1004, made in 2003, 460V, 125 psig, 100 hp electric motor, 425 cfm, includes air line from compressor to tank, includes disconnect box

214
Vertical Air Tank
40" x 9' tall, includes all air line from tank to equipment, includes Kaeser water evaporator and air filters mounted in air line

215
Cutler-Hammer Freedom Series 2100 Motor Control Center
480V, 3 ph, 600 amps/section, 13 sections, 2' x 23' x 93" tall overall, includes conduit from control center to 1st junction box above control center

216
Cutler-Hammer Powerline Switchboard
2000 supply amps, 600 VAC, 3 pole, 480V, 1600 amp max switch, includes conduit from switchboard to 1st junction box above switchboard

217
Cutler Hammer Freedom Series 2100 Motor Control Center
480V, 3 ph, 600 amp, single section

218
Asco Auto Power Transfer Switch
SN: 497192RE, Series 300, 240V, single phase, includes (2) 100 amp disconnects, includes dry type, 480V to 240V transformer, includes junction box as marked, includes wire in box, includes extra auto transfer switch box, includes conduit from panels to 1st junction box and from panels to transformer

219
480V Panels and Transformer
480V breaker panel, Aegis SP225 Surge suppressor, Cutler hammer dry type transformer, 480V to 240V, 200 amp disconnect panel, includes conduit from panel to transformer and from panels to 1st junction box

220
Conduit
Includes all conduit and wire from all electrical panels to equipment not lotted otherwise, includes all junction boxes in building, 1' of conduit to be left on motors and starter panels, does not include any 110V conduit or panel, does not include electronic control wiring for setworks etc. Only include wiring inside conduit and junction boxes

221
110V Electrical
Includes all 110V breaker panels and conduit in building, includes all 110V lighting, includes junction box in electrical room as marked, includes 460V transformer

222
Cabinet with Electrical Components
19' x 42' x 67" tall, includes all contents, breakers, switches, controls, control boards, starters

223
Cabinet with Electrical Components
18" x 36" x 75" tall, includes all contents, fuses, switches, breakers, etc.

224
Structural Steel
Includes all support steel, slide pans, and catwalk in building not lotted otherwise, Including all large I-Beams under back half of mill(Under Resaw and Shurman Edger) were originally supports for a highway overpass, does not include any supports needed for the building itself

225
Wheelbarrow and Hand Tools
10 cubic yard 2 tire wheelbarrow, shovels, cant hook, broom, fork, sledge hammer

226
Wheelbarrow and Hand Tools
10 cubic yard 2 tire wheelbarrow, shovels, cant hook, broom, fork, sledge hammer

227
Wheelbarrow and Hand Tools
10 cubic yard 2 tire wheelbarrow, shovels, cant hook, broom, fork, sledge hammer

228
Pipe Wrenchers
(1) Ridgid 48", (1) Ridgid 36"

229
Hand Tools
Shovels, broom, cant hook, sledge hammer

230
Hand Tools
Shovels, scraper, cant hooks

231
Hand Tools
Shovels, cant hook, sledge hammer

231A
Ridgid 300-12 Pipe Threader
SN: ED63283F00, 115V plug-in, 36 rpm, foot pedal control, on stand, Includes 2 new sets of teeth

232
Workbench with Tools
35" x 88" x 38" tall, includes all tools and parts on bench and pegboard, 3 1/2" bench vise, includes 2 air hose reels mounted beside bench, Extension cords

233
Floor Fans
(1) 36" by gang edger, (1) 24" by gang edger, (1) 28" by head rig, (1) 36" by trimsaw

234
Hand Tools
Shovels, broom, sledgehammer, scraper, located by green chain

235
Hand Tools
Shovels, broom, cant hook, sledge hammer, splitting maul, located by green chain

235A
Extension Cord Reel
220V cord, 600V, 35 amp, located by green chain

235B
Extension Cord Reel
220V cord, 600V, 35 amp, located by green chain

236
Dip Tank
6' x 20' x 78" deep, includes hydraulic pack for power, includes electrical control panel

237
Salem 11 Head Drop Saw Trimmer
Electric drive, no saws installed, air cylinders on head, 5' x 28' x 8'6" tall overall, uninstalled, feed deck included but not attached, includes (22) 26" blades-some sharpened, includes PCL electrical control panel, includes control panel

238
Salem Sorting Deck
8" x 24" rolls, 12' x 24', 11 strand, no chain installed on 2 strands-includes chain to install, no drive, uninstalled

239
Dead Rolls
30" x 19', 4 1/2" x 24" rolls, 30" spacing, no legs

240
Mellott 5 Strand Unscrambler
Electric drive, 7' x 12' x 4' tall, uninstalled

241
Roll Case
No drive, 64" x 22', 10 1/2" x 48" rolls, 30" spacing, uninstalled

242
Webster Vibrating Conveyor
No drive, uninstalled, 24" pan, 10" flared sides, 39" x 16'3"

243
McDonough 54" Band Resaw
SN: 54-880, no drive, uninstalled, 7 1/4" x 54" wheels, 7/8" mead on top wheel, top wheel needs mounting hole, recalibrated/machined, includes gearboxes/electric motors, pallet as marked

244
G.E. AC/DC Carriage Drive
SN: 3855-G, 250 hp, 460V, 1180 rpm electric motor, 200 kw unit, 200 amps, empty wire spool for up to 1' cable, includes 24" blower with electric drive

245
Carriage Idler Pullies
2 1/2" x 47" pullies-hold up to 1 1/4" cable, mounted on frame, 3' x 6' x 54" tall overall

246
Miller "Big 40" Welder/Generator
SN: HH079911, 40V, 100 amp, welding range-15-400, 4 cylinder gas motor. Ran when put into storage-but engine had a knock

247
Lumber End Sprayer
57" x 69" x 60" tall, dual sprayers with 110V plug-ins, includes 2 partial barrels of end paint

248
Dip Tank Mixer
110V plug-in, used to keep dip tank stirred

249
Crane Mat Drilling Machine
100V plug-in, Milwaukee Super Hole Shooter 3/4" drill, includes (2) 1" x 7' drill bits, mounted on castors

250
Mohawk LMF-12 Car Lift
SN: 9201116, 12000 lbs capacity, powered by 2 hp, 220/440V hydraulic pack, 7" x 12" x 21" hydraulic pack, uninstalled, includes disconnect box

251
Mohawk LMF-12 Car Lift
SN: 9201117, 12000 lbs capacity, powered by 2 hp, 220/440V hydraulic pack, 7" x 12" x 21" hydraulic pack, uninstalled, includes disconnect box

255
2021 Taylor T1023 Wheel Loader
SN: P-45538 (PIN: CLG848HZLLL620368).
Meter reads: 1,716 hours.
Engine: Cummins QSB6.7-173 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 25".
Operating capacity: 34,710 lbs.
Tire Size: 20.5R25.
Attachments: None included.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Has backup camera, joystick control, and air ride seat. Runs and operates flawlessly. Has full warranty from Taylor to 10,000 hours or 01/27/2032.

255A
Rockland Grapple Forks
SN: 199823, Model: LFW, mounted on lot #255, 7" x 48" forks, 6' wide, quick attach

256
2014 Volvo L70G Wheel Loader
SN: VCE0L70GE0S614348.
Meter reads: 11,195 hours.
Engine: Volvo D6H (SN: 11586949)-154 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 20".
Operating weight: 30,730 lbs.
Tire Size: 20.5R25.
Attachments: None included.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Hydraulic cylinder with button control to open engine bay. Has backup camera and air-ride seat. Starts, runs, and operates great!

256A
Craig Grapple Forks
SN: T14110059, mounted on lot #256, weight: 3840 lbs, 6" x 48" forks, 75" wide, quick attach

257
2007 Komatsu WA-200 PT-5 Wheel Loader
SN: 68753 (PIN: KMTWA052L01068753).
Meter reads: 11,382 hours.
Engine: Komatsu 5.9L (SN: 26400039)-128 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 18".
Operating weight: 25,800 lbs.
Tire Size: 20.5R25.
Attachments: JRB forks, 6" x 48", 64" wide
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Starts, runs, and operates good. This loader is being reserved on the seller's behalf until 6/28/24 to assist with loadout. Possession and ownership of this machine will transfer to the new buyer on the above listed date. Payment for this machine is due on the above listed date. Seller warrants the machine will be insured and in the same condition as it was on auction day. There may be some additional hours on the meter.

258
2006 Komatsu WA320-5L Wheel Loader
SN: A32761 (PIN: KMTWA028C57A32761).
Meter reads: 17,528 hours.
Engine: Komatsu 5.9L (SN: 46572138)-171 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 26".
Operating weight: 24,360 lbs.
Tire Size: 20.5R25.
Attachments: JRB pin through grapple forks-7" x 45", 78" wide.
Heater: Yes.
A/C: Yes.
Quick Attach: No.

Features and Notes: Starts, runs, and operates good

259
2009 Komatsu WA320 PZ-6 Wheel Loader
SN: 70643 (PIN: KMTWA108K01070643).
Meter reads: 20,377 hours
Engine: Komatsu SAA6D107E (SN: 26555462)-171 hp.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: Yes.
Center to center of pins: 28".
Operating weight: 21,150 lbs.
Tire Size: 20.5R25.
Attachments: JRB pin through grapple forks-7" x 42", 78" wide.
Heater: Yes.
A/C: Yes.
Quick Attach: No.

Features and Notes: Starts, runs, and operates good

260
JRB Quick Attach Loader Bucket
Model: WA250, SN: 0705-162177-176, was used on lot   # 257-Komatsu WA-200 PT, 38" x 104" x 44" tall

265
1997 John Deere 550G LGP Series IV Dozer
SN: T0550GL831846.
Meter reads: 3,714 original hours.
Engine: 4 cylinder John Deere.
Fuel type: Diesel.
Blade: 10' 6 way.
ROPS: Open cab.
A/C: No.
Heater: No.

Features and Notes: 24" tracks, John Deere winch with 1" cable, Forestry package, power shift transmission, Foot steering. Starts, runs, and operates strong.

268
2000 Barko 885B Feller Buncher*
SN: 22785, Meter read: 7532 hours, with 22" cutter head

269
22" Cutter Head*
Can fit 885B Feller Buncher

270
2005 Prentice 280D Knuckleboom
SN: D280PR59806.
Meter reads: 4,289 hours.
Engine: 6 cylinder Cummins.
Fuel type: Diesel.
Continuous Grapple: Yes, 48" max.
Trailer: Evans.
Delimber: None.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes

Features and Notes: 11R22.5 tires, pilot joystick controls. Starts, runs, and operates. 

271
CTR Bucksaw
Model: CTR-50-MAXIE, SN: 50-181, 64" x 17'6" rack, 48" bar, direct drive

275
2022 Kenworth W900 Truck
VIN #: 1XKWD49X7NR173429.
Meter reads: 97,057 original miles
Engine: Cummins X15 (SN: 80381993).
HP: 565.
Transmission: 18 speed Eaton Fuller.
GVWR: 53,200 lbs.
Front axle rating: 13,200 lbs.
Rear axle rating: 20,000 lbs.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R22.5 tires, 60" sleeper, New batteries installed 11/2023. Starts and runs well! Under full warranty from Kenworth until 500,000 miles or 12/27/2026. Has title.
 

276
2003 Peterbilt 379 Truck
VIN #: 1XP5D49X03D802786.
Meter reads: 181,406 miles-rolled over once.
Engine: Cummins ISX (SN: 60810341).
HP: 600.
Transmission: 10 speed Eaton Fuller.
GVWR: 50,000 lbs.
Front axle rating: 12,000 lbs.
Rear axle rating: 19,000 lbs each.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R24.5 tires, 48" sleeper, less than 200,000 miles on engine-was installed by Cummins, less than 300,000 miles on new transmission and rear end. Starts and runs good. Has title.

277
2000 Peterbilt 379 Truck
VIN #: 1XP5DB9X8YN508915.
Meter reads: 601,080 original miles
Engine: Cat C15 (SN: 6NZ03703).
HP: 475.
Transmission: 10 speed Eaton Fuller.
GVWR: 50,000 lbs.
Front axle rating: 12,000 lbs.
Rear axle rating: 19,000 lbs.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R24.5 tires, day cab. Starts and runs good. Has title. 

278
2017 Kenworth W900 Truck
VIN #: 1XKWD49X8HJ139874.
Meter reads: 607,598 miles.
Engine: Cummins ISX15 (SN: 79898058).
HP: 550.
Transmission: 18 speed Eaton Fuller.
GVWR: 53,200 lbs.
Front axle rating: 13,200 lbs.
Rear axle rating: 20,000 lbs. each.
Heat/AC: Yes.
Wet kit: No.

Features and Notes: 11R24.5 tires, 48" sleeper. New batteries on 5/17/2024. Starts and runs. Very nice clean truck. Has title. Needs new head gasket or potentially more work done to head

280
2007 Fontaine Phantom Flatbed Trailer
VIN #: 1R1F348287K570792.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps, toolbox under deck, aluminum trailer. Has title.

281
2007 Fontaine Phantom Flatbed Trailer
VIN #: 1R1F348207K570754.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding rims, includes sliding straps, toolbox under deck, aluminum trailer. Has title.

282
2006 Reitnouer MaxLite Flatbed Trailer
VIN #: 1RNF48A226R011645.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps, aluminum trailer. Has title. 

283
2006 Reitnouer MaxLite Flatbed Trailer
VIN #: 1RNF48A206R011630.
GVWR: 80,000 lbs.
Length: 48'.
Width: 102".
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps, aluminum trailer. Has title.

284
1997 Fontaine Ultra Flatbed Trailer
VIN #: 13N145309V1575034.
GVWR: 80,000 lbs.
Length: 45'.
Width: 8'.
Tires: 11R22.5.

Features and Notes: Steel rims, includes sliding straps. Has title.

285
1998 Fontaine Ultra Flatbed Trailer
VIN #: 13N145309W1579893.
GVWR: 80,000 lbs.
Length: 45'.
Width: 8'.
Tires:11R24.5.

Features and Notes: Steel rims, missing 2 tires, includes sliding straps, missing several lights. Has title. 

290
1985 Shop Built 4 Bunk Log Trailer
VIN: VA181140TR.
Length: 40'.
Bunk size: 87" wide x 85" tall.
Bunk spacing: 11'.
Tires: 11R22.5.
No title, bill of sale only.

295
1988 Great Dane Chip Van Trailer
VIN #: 1GRAA9024JS057238.
GVWR: 65,000 lbs.
Length: 42'.
Inside width: 88".
Inside height: 102".
Tires: 295/75R22.5.

Features and Notes: Half door in rear-hinged at top. No title, bill of sale only.
 

296
1984 Fruehauf Chip Van Trailer
VIN #: 1H2V04825EC003542.
GVWR: 68,000 lbs.
Length: 45'.
Inside width: 98".
Inside height: 112".
Tires: 11R22.5.

Features and Notes: Holes cut in rear doors for chip-chutes. No title, bill of sale only.

297
1977 Fruehauf Chip Van Trailer
VIN: MEY529991.
GVWR: 68,000 lbs.
Length: 45'.
Inside width: 96".
Inside height: 102".
Tires: 11R24.5.

Features and Notes: No rear door. No title, bill of sale only.

298
1974 Miller Open Top Chip Trailer
VIN: Y2080813.
GVWR: 73,950 lbs.
Length: 40'.
Inside width: 92".
Inside height: 92".
Tires: 295/75R22.5.
No title, bill of sale only.

299A
Rol-Lift Pallet Jack
SN: E2914637, 6" x 48" forks, 4500 lbs capacity

299B
Whitco Power Washer
Model: 4200, SN: PL01844, 220 plug-in, diesel powered heater, includes wand and 25' of pressure hose

300
Security Camera System
Includes control box and monitor in women's bathroom in break room building, includes all cameras in mill building and break room

301
Lockers
(3) sections located in break room, (1) 18" x 36" x 78" tall, (1) 18" x 48" x 78" tall, (1) 18" x 60" x 78" tall

302
Emergency Eye Wash Station
Located in break room, includes first aid kit on wall

303
Lathem Time Clock Machine
110V plug-in, includes time card holders

304
New WEG Electric Motor
5 hp, 460V, 3 ph, 182/4T frame, 1750 rpm

305
New WEG Electric Motor
5 hp, 460V, 3 ph, 182/4T frame, 1750 rpm

306
New WEG Electric Motor
7 1/2 hp, 460V, 3 ph, 182/4T frame, 1750 rpm

307
New WEG Electric Motor
3 hp, 182/4T frame, 1765 rpm, 460V, 3 ph

308
New WEG Electric Motor
7 1/2 hp, 213/5T frame, 3 ph, 1765 rpm, 460V

309
Air Compressor
Mounted on 4' x 90" skid unit, includes gas jug and 2 hoses, mounted to unit, Predator 420cc gas motor, 20" x 4' horizontal tank

310
V-Groove Pulley
21", 10 groove, 6 1/2" arbor

311
Ridgid Pipe Threader
110V plug-in, foot pedal control; condition unknown

312
Willis Drill Press
Model: SENR7, SN: 3717, 3 ph electric motor-110V plug-in, 18" x 18" table top, Heavy Duty

313
WEG Electric Motor
3 ph, 75 hp, 1775 rpm, 460V, rewound, 364/5T frame

314
Westinghouse Electric Motor
250 hp, 1775 rpm, 445T frame, 460V, 13 1/2" 8 groove pulley, mounted on steel frame was used to run old circle mill, was in good working condition, when put into storage

315
Toshiba Electric Motor
125 hp, 1760 rpm, 405T frame, 460V, rewound

316
Westinghouse Electric Motor
50 hp, 1770 rpm, 326T frame, 460V, rewound

317
Electric Motors
(3) 5 hp motors, 4 gearboxes

318
7 1/2hp Hydraulic Pack
SN: 89A028, 10 gpm, 460V, 2000 max psi, 26" x 48" x 12" tank

319
Electric Motors
(1) 7 1/2 hp, 460V, 1165 rpm, (1) 10 hp, 460V, 1730 rpm with gearbox

320
Babbitt Bearing Machines
Used to make bushings for lot #135, air powered press, 110V surfacer, includes melting ladle

321
Guide Dressing Machine
110V plug-in, includes steel blocks and wood dressing blocks

322
Guide Grinder Dressing Blocks
30 pieces, 2" x 3 1/2" x 12", flat

323
Guide Grinder Dressing Blocks
16 pieces, 1 5/8" x 2" x 10", grooved

324
Guide Grinder Dressing Blocks
13 pieces, 1 1/8" x 1 1/4" x 7", grooved

325
WEG Electric Motor
75 hp, 1775 rpm, 364/5T frame, 460V, rewound

326
Electric Motors and Gearboxes
7 1/2 hp motor with drive for vibrating conveyor, gearbox, 7 1/2 hp motor, 5 hp motor

327
Electric Motor
20 hp, 230/460V, 3652 frame, mounted on frame

328
Electric Motor
25 hp, 1800 rpm, 460V, rewound

329
Teco Electric Motor
200 hp, 1180 rpm, 460V, 447TZ frame, was used on AC/DC carriage drive, was in good running condition when taken out

330
Toshiba Electric Motor
200 hp, 1770 rpm, 460V, 445T frame, rewound

331
GE Electric Motor
250 hp, 1175 rpm, 440V, 8155Z frame, rewound

332
Electric Panels
460V panels with switches and breakers, breaker panel box, 600 amp disconnect box

333
Electric Panels
Motor control center with starters/disconnects, breaker panel

334
Silvatech Carriage Setworks
Brand new control panel with all wiring needed, includes extra boxes and parts, complete setworks

335
Tempo Sonic Sensors
(4) 24" sensors, (5) 32" sensors, new laser light

336
Banner Laser Scanner Bar
Model: MAHE26A, includes wiring, 2 bars

337
Banding Supplies
Banding tools, clips, cardboard corners, poly corner protectors

338
Banding Cart and Banding Tools
2 full and 1 partial roll of 1 1/4" steel banding, strapping tool, crimper, snips

339
Skid of 3/4" Poly Banding
1640' per roll, 12 full rolls, 3 boxes of clips, 500 clips/box

340
Banding
3 full and 1 partial roll of 5/8" poly banding, 4 boxes and 1 bucket of clips

341
Banding
12 full rolls of 3/4" steel banding, 5 gallon bucket of clips

342
Banding
4 full rolls of 3/4" steel banding, plastic tote of clips

343
Banding Cart
No banding, includes strapping tool and crimper

344
Banding Cart
No banding, missing 1 wheel, strapping tool and crimper

345
Banding Cart
Partial roll of 3/4" steel banding, strapping tool and crimper

346
Banding Cart
No banding, crimper and strapping tool

347
Banding Cart
Partial roll of 3/4" steel banding, strapping tool, crimper, snips

348
Banding Tools
Assorted Strapping Tools, cutters, extra parts

349
Brand New Banding Tools
Strapping tool and crimper, for steel banding up to 3/4"

350
Brand New Banding Tools
Strapping tool and crimper, for steel banding up to 3/4"

351
Brand New Banding Tools
Strapping tool and crimper, for steel banding up to 3/4"

351A
Banding Tools
Assorted styles, crimpers, strapping tools

352
MDI Metal Detector
Brand new control panel, includes detector and 5' fiberglass conveyor section, 18" pan, 10" flared sides

353
Poly Sheets
(2) 4' x 10' x 1/4", (1) 4' x 10' x 3/8", 2 thick strips

354
Assorted Poly Strips

355
Screen for Chip Shaker
In 2 pieces, 5' x 8' total, 2" holes

356
Pallet of Chain
(31) 10' sections of new C55B rooftop chain, roll of 28" steel slats

358
Rolls
(1) 12" x 36", (1) 10 1/2" x 42", (1) 8 1/2" x 36", (1) 8 1/2" x 24", shaft parts

359
Conveyor Belts
(1) 40", (1) 30", (2) 24", (1) 14", (1) 16", lengths unknown

360
Pallet of Chain
(4) 10' sections of new WH78 chain

361
Fluids
(14) 1 gallon jugs of bar and chain oil, (2) 3 gallon jugs of 22 Express anti mold

362
Pallet of Chain
(10) 10' sections of new H78 chain

363
Wire Spool
Partial spool of wire

364
Pallet of Chain
(14) 10' sections of H78A rooftop chain, mostly new, some gear roller chain

365
Parts for Milling Machine
Wrenches and dies

366
2-Way Cant Turner
Used in roll cases for runaround system, hydraulic drive

367
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367A
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367B
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367C
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367D
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367E
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367F
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367G
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367H
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367I
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367J
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367K
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367L
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367M
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367N
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

367O
Flex Aline Gearbox
25:1 ratio, 10 hp input rating, 1 gearbox/lot, all either brand new or fully rebuilt

42039667

368
Braided Carriage Cable
Full set of 3/4" cable-2 long and 2 short, plus extra partial spool of 1/2" cable

369
Crate of Motors and Gearboxes
Misc. 3-10 hp motors, gearboxes, parts

370
56" Circle Saw
F7 style, good condition

371
56" Circle Saw
F7 style, good condition

372
56" Circle Saw
No bits or shanks, was broken and repaired

373
54" Circle Saw
F72 style, good condition

374
54" Circle Saw
F7 style, good condition

375
Assorted Braided Cable
3/4", 3/8", 1/2", 5/8"

376
Steel Rods
Were used for crane mats, 1" pipe-(16) 20' pieces, includes hand tools to add threading

377
Lights
Dome style ceiling lights

378
Tarps
3 pieces, size unknown, 2 very large ones, steel cover

379
Banding Tools
Assorted styles, crimpers, strapping tools

380
New Conedrive Gearbox
Model: HU50-1, 5:1 ratio, 1750 input rpm, includes extra parts

381
Assorted Tools
Electric cord reel, assorted hand tools, work lights, extension cord, Yale 3/4 ton chain hoist

382
Hydraulic Cylinders
Assorted sizes, hydraulic hoses, good condition

383
Electric Motors and Gearboxes
Drive for vibrating conveyor, misc. gearboxes, 3-10 hp motors

384
Lincoln Electric Motor
30 hp, 1755 rpm, 460V, 286T frame, rewound

385
Toshiba Electric Motor
7 1/2 hp, 460V, 1750 rpm, 213T frame, rewound

386
Pallet of Grease
Aeroshell 16 grease, was used as 5th wheel grease, (29) 5 gallon buckets full

387
Vibrating Conveyor Fiberglass Section
40" x 5', 24" pan, 10" flared sides

388
Beacon Contractor's Mix Grass Seed
(9) full 50 lbs bags, 1 partial bag

389
Jockey Grinder
Mounted on Milwaukee drill

390
Jockey Grinder
Model: 85H, mounted on Milwaukee grinder

391
Jockey Grinder
Mounted on Milwaukee drill

392
Jones Saw Grinder
Model: 6M, SN: 6858K, mounted on drill

393
Jockey Grinder Discs
(39) brand new Simonds discs, dressing blocks, extra parts

394
Circle Saw Tooth Setters
4 setters, box of clips

395
Shanks and Bits
Box of assorted new circle saw bits and shanks

396
Pallet of Grease
Aeroshell 22 grease, was used as 5th wheel grease, Aeroshell 33 grease, some buckets, some tubes

397
Pallet of Grease
Aeroshell 22 grease, was used as 5th wheel grease, Aeroshell 33 grease, some buckets, some tubes

398
Floor Fan
30", on stand, 110V plug-in

399
Floor Fan
40", on castors, 110V plug-in

400
Floor Fan
40", on castors, 110V plug-in

401
Ladderback Chain
Brand new, 12", (5) 10' sections

402
Ladderback Chain
New-never installed, just sat for several years, 12" (5) 10' sections

403
Electrical Panels
Several control panels, junction box, brand new Cutler Hammer box-empty

404
Pallet of Assorted Wire

405
Hydraulic Hoses
Assorted hoses, big hoses for carriage drive, some brand new hoses, hydraulic radiator unit, (4) pieces of 3/4" x 10' steel, hydraulic line

406
Pallet of Misc.
28" floor fan, hand tools, assorted air hose, ratchet straps

407
Rollers
8 1/2" x 48", 15 pieces

408
Catwalk Sections
(9) 2' x 20' sections, assorted smaller pieces

409
Kiln Carts
Approx. 60 sets, no cross members, 6' long

410
Shelf of Chain
All brand new, 20-1600 and 20-1640 roller chain, 81X chain, 20-1760 roller chain, 20-1740 chain, H74, H60, H78 chain, pegs for chain H130 and H78B rooftop chain, includes all chain on shelf, does not include shelf or contents of top shelf

411
Shelf of Parts
Flex conduit, conduit fittings, wiry, misc. parts, includes all contents of shelf as marked

412
Shelf of Parts
Shingles, new dome lights, lots of brand new small roller chain, 40' of new #120 RIV chain, 30 of new GS 100 RIV chain, Tulsa Gearbox, pulleys, roller, guards, includes all contents of shelf except pipe on top shelf

413
End-Paint Sprayer
395 ST Pro paint sprayer, 110V plug-in, 1 full and 1 approx. 3/4 full barrel of Anchor seal spray

414
Crate of Electrical
Lots of assorted wire, conduit fittings, includes conduit pipe on top of shelf #412, includes conduit beside crate

415
Shelf of Parts
Junction boxes, pulleys, sprockets, bearings, electric motors, hydraulic cylinders and valves, Accumulator tanks, assorted fittings for carriage

416
Shelf of Parts
Lots of chipper parts-nuts and bolts, counter knives, knife holders, (4) laser lights-condition unknown, laser light brackets, window AC unit, 18" conveyor belt, new emergency eyewash station, electrical components, rubber bump stop

417
Genset Radiator
For Cat 3412 Genset, 2 piece radiator

418
Edger Feed Rolls
3 1/2" x 30" rolls, rebuilt, fit Edmiston edger

419
Trim Saw Blades
(8) 26", (2) 24" all 1 1/2" arbor, all sharpened

420
Shelf of Parts
Light bulbs, lots of electrical, switches, breakers, boxes, disconnects, motor mount frames, Partial Barrel of Essentia Lube

421
Shelf of Parts
18" x 45" x 75" shelf with all contents, assorted fluids, cordless grease guns, threaded rod, cylinder, includes rods and hand tools against end of shelf

422
Shelf of Parts
18" x 45" x 75" shelf with all contents, bottle jacks, truck parts, hand cleaner, bearings, washers-flat and lock, laser light brackets, threaded rods

423
Shelf of Parts
18" x 45" x 75" shelf with all contents, hydraulic motors and cylinders, hydraulic fittings, cotter pin assortment hydraulic tank heaters, banding tools, Mac Valve packing kits, Parker Drip Lube Kits

424
Shelf of Parts
18" x 45" x 75" shelf with all contents, air and hydraulic cylinders, hydraulic motors, gearboxes, valves, air bladders, debarker parts, bearings, safety gear

425
Shelf of Parts
18" x 45" x 75" shelf with all contents, assorted filters, hydraulic valves, sprockets, pulleys, bushings, conduit fittings, coil springs for vibrating conveyor

426
Shelf of Parts
18" x 45" x 75" shelf with all contents, bearings, bushings, sheaves, shafts, new shelving

427
Fire Extinguishers
11 pieces, assorted sizes

428
Shelf with Parts
18" x 45" x 75" shelf with all contents, Flexco belt lacing and belt lacing tool, roller chain, pegs for chain, filters

429
Shelf with Parts
18" x 45" 75" shelf with all contents, lots of new small size roller, chain, chain parts and master links, key stock, carriage parts, assorted fasteners

430
Shelf with Parts
12" x 36" x 75" shelf with all contents, hand held pipe threader with 3 dies, tap and die kit, thread repair kit

431
Bolt Bin Organizers
12" x 36" x 64" total-2 sections, includes all contents and contents on top of organizer

432
Steel Workbench
32" x 9' x 42" tall, does not include bench vise or bench grinder, (2) organizers, assorted hand tools, includes pegboard and all contents of pegboard, oil waste can

433
Wilton 10" Bench Grinder
Model: 180, SN: P9520, 115V plug-in

434
Olympia 6" Bench Vise

435
Shelf of Parts
Misc. nuts and bolts, fluids, air filters, parts for lube systems, safety signs, 4' level

436
Shelf of Parts
Bearings, sprockets, O-rings, copper tubing, fittings,

437
Shelf of Parts
(5) brand new 18" broom, heads, air valves, parts and fittings, nails, covers, laser light, hydraulic hose cover, carriage wheel

438
Battery Charger
Single cylinder gas motor, includes cables, condition unknown

439
Cabinet with Welding Parts
2' x 3' x 78" tall, lots of welding rods, mask, tank saugers, cutting torch, pop rivet tools

440
Cabinet with Parts
20" x 2' x 3' tall, assorted welding parts, assorted wire, wear plate for carriage, shaft stock

441
Amrox Drill Press
Model: AF12, 5/8 chuck capacity, JT-3 spindle, 110V plug-in, includes 2 boxes of bits, and vise clamp

442
Continental 30 Ton Shop Press
Model: HV100, frame rated for 30 ton, 50 ton bottle jack

443
Hand Tools
Includes all hand tools hanging from wall, grease guns, wire, jumper cables, flex magnet, oil can, U-bolts, filter wrenches

444
Assorted Motor Belts
Includes all belts hanging on wall in lower level of mill building, includes pallet of belts, lots of brand new belts

445
Mandrel Shaft
2 7/16" x 16'8"

450
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

451
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

452
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

453
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

454
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1350 pieces

455
Stacking Sticks
3/4" x 1 1/4' x 4' long, kiln dried, mixed species, approx. 1800 pieces

456
4x4's
(100) 3" x 4" x 8' long

457
4x4's
(100) 3" x 4" x 8' long

458
4x4's
(116) 3" x 4" x 8' long

459
4x4's
(100) 3" x 4" x 8' long

460
4x4's
(100) 3" x 4" x 8' long

461
Rough Cut Lumber
Mixed species, kiln dried, approx. 180 BF, 3/4" thick

462
Assorted Hardwood Flooring
T and G, 8-12' long, 4-7" wide includes trim, approx. 750 BF kiln dried, 3/4" thick

463
Assorted Hardwood Flooring
5-7" wide, 8-15' long, T and G, kiln dried, approx. 3000 BF, 3/4" thick

464
Assorted Hardwood Flooring
4-6" wide, 9-12' long, T and G, kiln dried, approx. 2800 BF, 3/4" thick

465
Rough Cut Mixed Species Lumber
Kiln dried, 1" thick, 4-12" wide, 12' and 14' long, approx. 2000 BF

465A
Assorted Hardwood Flooring
3/4" thick, 4-7" wide, 8-12' long kiln dried, approx. 1600 BF T and G

466
Rough Cut Mixed Species Lumber
Kiln dried, 3 1/2-12" wide, 1" thick, approx. 3000 BF, 8', 14', 16' long

467
Assorted Hardwood Flooring
3/4" thick, 4-8" wide, kiln dried, includes some trim, 10' long, approx. 2500 BF, T and G

468
Assorted Hardwood Flooring
3/4" thick, kiln dried, T and G, 3-8" wide, 10' long, approx. 2600 BF

469
Assorted Hardwood Flooring
4-5" wide, 3/4" thick, T and G, kiln dried, 14'6" long, approx. 1200 BF of flooring, includes approx. 350 BF of rough cut kiln dried lumber on top of flooring

470
Rough Cut Mixed Species Lumber
Kiln dried, 1 1/2-2 1/2" thick, 4-16" wide, 10'6"-12' long, approx. 750 BF

471
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 2"-8" wide, 8'-11' long, approx. 1700 BF

472
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 8-12' long, 4-6" wide, approx. 2600 BF

473
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 2-8" wide, 8-11' long, approx. 1200 BF

474
Rough Cut Mixed Species Lumber
Kiln dried, 3/4-5/4" thick, 3 1/2-15" wide, 8', 10', 12' long, approx. 4100 BF

475
Rough Cut Mixed Species Lumber
Kiln dried, 3/4-1" thick, 3-10" wide, 10' and 16' long, approx. 4600 BF

476
Assorted Hardwood Flooring and Rough Cut Lumber
Flooring: 3/4" thick, T and G, kiln dried, 3-8" wide, 12-16' long, approx. 1300 BF; Lumber: kiln dried, mixed species, 1" thick, 4-12" wide, 12' and 16' long, approx. 1300 BF

477
Assorted Hardwood Flooring
Kiln dried, T and G, 3/4" thick, 3-7" wide, mostly 11' long, approx. 1900 BF

478
Rough Cut Mixed Species Lumber
Kiln dried, 3/4-5/4" thick, 3" wide, 19' long, approx. 200 BF