• CINCINNATI TOOLMASTER Features:
• X & Y Axes Power Feeds.
• Box Bed Ways.

• CINCINNATI TOOLMASTER Specifications:
• Work Table:
• Surface Area: 42″ x 10″
• T-Slot Center Distance: 3 @ 2-3/8″ centers
• T-Slot Sizes: 11/16″

• Travels:
• X-Axis Table Travel: 22″
• Y-Axis Table Travel: 10″
• Z-Axis Table Travel (knee): 17″
• Quill Travel: 3″
• Ram Travel: 17″

• Spindle:
• Spindle Taper: Monoset Collets
• Quill Diameter: 2-7/8″
• Speeds: 140-240-375-630-860-1500-2270-3800 RPM
• Motor: 1 Horsepower, 220 / 440 Volt, 1,125 RPM, 3.6 / 1.8 Amps, 60 Hz

• Head Adjustments:
• Head Swivel: 90 degrees
• Head Tilt: 90 degrees

• General:
• Electrical: 220 / 440 Volt, Three Phase
• Overall Dimensions: 60″ x 66″ x 78″ tall

Cincinnati milling machine company. Toolmaster Mill. Power Feed for table and saddle. Baldor M32181 three phase motor used for phase converting included.
ENCO coolant sprayer added to the lot.  

Model Number: 137-3150 
Serial number: 976037
26 in length 
8 in width Induction motor
Blade Size: 1/2"x80"x64-1/2", 1/2 Hp (.37 Kw), 1720 Rpm, Vise: 4"x5", Bed Wxl: 8"x26", Made In Taiwan

20 Ton Hydraulic Press. Bearing and pipe clamps included. 

• Ram stroke:7-1/2"
• Working range: 0" to 38"
• 2 Press plates 7-1/2" x 3-1/2"
• Remove, install bearings, gears, U-joints, bushings, ball joints
• Heavy duty construction
• Raise and lower table adjust distance
• Spring return ram speeds up work

Model No.2
Base Size:6-3/4 x 17
Weight:88 lbs
Height Over Table 8-1/2"
Height of Press18
Leaverage Ratio 35:1

Model T6510, 2 HP Motor
With stand

Baldor Motor Horsepower1.5 HP
Motor Voltage 230 Volt
Motor RPM's 3600 RPM
Motor Voltage 115 Volt
Motor Voltage Phases1 Phase
Manufacturer Baldor-Reliance
410B Buffer with stand and accessories. Buffing wheels buffing compound

Sears 106.153780 2hp Air compressor. 7.8 cfm at 40 psi.

100MM

17 Each.  Several still sealed and waxed

Rolling storage cabinet work bench 50"x26"x 29" tall. Does not include vice or contents in or on the bench.

Includes all accessories shown. Does not include work bench or parts of the work bench.

5c Collet Index head, 978212.
Enco End Mill Grinding Fixture 287-6840

Enco 235-6040 Vertical Horizontal 5c Collet Fixture. 5c Square and Hex Collet Fixture

29 5C Collets with rack.
3 Enco step Collets

20 End mills total. Enco Tin Coated set from 3/16 to 3/4. 320-0000

Enco 287-6520 End Mill Grinding Fixture for 3/8, 5/8 and 1/2 end mills

10 pair Enco parallel set 637-7530.
2 USA Air force engraved parallels

SYIC-3800  High-Performance Milling Chuck Collet Set R8 X15 & WRENCH

Mitutoyo magnetic stand 7011-S, New in box.

Mitutoyo 7011-S magnetic base with DoAll K-185 Precision Indicator

Brown and Sharpe large magnetic base. Measures 11 in tall x 3 wide.

Sears Roebuck and Fuji Jikoh BA-10 magnetic bases.
Federal B5M indicator and 2 extra bases included.

Mitutoyo 297-201-01 Micrometer Head Digital 0 - 2" .0002"

Mitutoyo internal bore micrometer. 1DIV = .0002"

Mitutoyo 223-125 Digit outside Micrometer. 0-1 INCH

Mitutoyo 122-101 Blade Micrometer. 0-25mm

Mitutoyo 510-101 Indicating Micrometer. 0-25mm with resolution 0.001mm

Mitutoyo Micrometer Jeweled 510-102 25-50mm 0.001mm Metric

Mitutoyo 505-634 200mm Dial Caliper Depth Gage

Chatillon DPPH-100 Tension / Compression Force Gauge 100x1lb and DFG-10 Digital force gauge.

Chatillon DPP-25 and DPP-50 force gauges. 25lb and 50lb

Chatillion DPP-1KG and DPP-5KG force gauges

Starrett No. 120 dial caliper. Pittsburgh digital and dial calipers. Unbranded caliper.

James A Biddle 560400 Motor and Phase Rotation Tester

HIOS HD-50 Torque Meter with aluminum case

Charvoz 11-1282 Proportional Divider and Staedtler compass set

Fluke 77 Multimeter and Fluke 80i-400 current probe.
IBM 8060A/AA Multimeter.
IBM VOM-2A Multimeter.
Wigginton Voltage Tester.

4 digital multimeters, 3 digital scales, headlamp, 4 cases of wiring crimps and terminals.

All assorted hand tools. Drivers, pliers, scissors and more

All assorted hand tools. Drivers, pliers, scissors and more

2 Pana Vices and clamps

One Pachmeyer driver set and 2 unbranded.

Mild steel welding rods, Bronze welding rods. Corner clamps, welding blanket, hammer.

Large collection of files.
Many sizes and styles

Sledge, dead blow and more.
Vintage Bridgeport nail puller

10 large C clamps from 2.5" to 12".
Wood crate box with class 9 label

Small and large caster wheels. From 1.5in to 6in wheels.

4 Ton cable winch new in box.

Pittsburgh 36in.  bolt cutters 32254. Small bolt cutter.
8 American Locks with Keys.
One combination lock, code "WIN" is currently on the dial and lock is functional.

Marathon Electric 30B 184TTDR9622BG L

GE 5KC45NG446X motor. Single phase, 115/230v. 1hp

Boston Gear 8-212046-02 electric motor.
Boston gear reductor F315B-50-G1

Spa-rite C48J2EC11, 1/2HP, single phase, 115/230v

Park 7 drawer machinist tool box with contents. Mostly Lathe accessories, inserts, HSS. Keys included.

Kennedy MC-28-316302, 2 drawer machinist tool box with contents. Bearings and brushes. Keys included.

Morgan Chicago 4.5  Vice

Stanley C606 3in vice

55lb anvil. 9inx3.5in top.

Lathe accessories. Quick change tool post and adapters.
HSS, live centers, bits, boring, knurling.

Milling bits, pilots, counter bores

2 jacks, 4 jack stands, bottle jack, grease guns, bearing packing tool, creeper, timing light and more

Solid stock, tubing, hex stock. Hardware and contents of wall shelf included.

Metal cabinet 66x29x13. Hardware and contents included inside and on top of cabinet.

Cole tool manufacturing St Anne Illinois No. 7 Hand Drill press with Jacob's drill chuck. Pexto ratcheted drill 4010 Made in USA.

Craftsman No. 506.51890 10in Undermount vice

Craftsman workbench combo 10299 18x45x32 without the wood top. Wood top is 2ft x 5ft

Fowler & NSK Digitrix II Electric Micrometer. 0-1in

3 Brown and Sharp micrometers. 0-25, 25-50 and 2

Starrett No 436, 220m, 463 Head. Radius gauge. Center punches No. S 117

Scherr Tumico C-851 0-1in Micrometer

Craftsman 40755 and 38679 Indicator sets in boxes.

Scherr Tumico
SPI 20-701-9
AMES 282

Helios 11in, 270mm Caliper in box

The worlds first computer tachometer.  Computak MC-6500 with case, manual and accessories

Craftsman hole gauges, bore gauges, various feeler gauges.
Exact machinist level

Large twist drills. Superbore, counterbores.
2 reamers

4 kits of number and letter steel stamps. Sears 37812, 37913, 37924

Blue point AT-130 Die grinder and and AT-180 Nibbler

Craftsman Impact 756.18830, Central PNEUMATIC 91753, Sioux 3A1430, Air Speed PRH

5 Angle grinders, 2 Drills, Weller soldering iron

Supreme products Versamatic Speed Reducer for portable drills

Central Machinery item number 93364.
Measures 19x7.
Comes with a Makita box of parts. Measures 12x10.

1500 watt heat gun Chicago brand, item 35776.
Comes with a heat gun accessory kit. Item number 95301. NIB.

Harbor Freight TOOL item 41906. Quantity of 8 each. NIB.

Alloy Products Corp, 100 PSI + 250 F MAX. Serial number 17068-318. Measures 16 tall and 9.5 round.

Schumacher Electric Corp model. 
SE-40M. Runs 6 to 12 volts.

This rolling tool cart measures 56x33x18. Top load and 12 drawers with contents and 7 small side drawers, filled. Unlocked but no key noted.

Cart measures 58x27x18 with top load and 23 drawers.
Comes with drill bits, chisels, gauges, nut drivers, and more. 2 sets of key included.

Serial number 15-017. Measures 68 inch tall. Base measures 21 x 16.

Model CT-210 with stand. Measures approximately 33 inch tall.

Approximately 25 box and open end wrenches both standard and metric. Includes 1 small travel pouch.

Various sizes. Includes Crescent wrench long bars. Metric and standard.

Measures 18 inch.

Item CJ93B. As is.

11 SNAP ON wrenches metric and standard.

Both metric and standard. 32 each. Mixed sizes.

3 sets of deep sockets. 3 standard set with loose quantity.

9 each. Measures from 24 inch to 6 inch.

Snap On QJR284D Torque Wrench 3/8

Snap-on Tools QJR217C 3/8 Drive Click Type Torque Wrench

Snap-on Tools LRS70 1/2 Drive Ratchet Socket Extension Spinner . Also included is precise Torq Meter

3 sets with loose sockets. 50 plus each.

Items C-65D Ignition Wrench Set
C-90 9 Piece 6 Point Ignition Combo Wrench Set
C-107 Open ended metric

Item number PGS1004. Appears as NIB.

CG-500 15 Pc.
SAE Stud Remover Extractor Set w/ KRA 150 Case Overall box measures rough 9x5x3

With key. Measures 12x8x4 Roughly.

Item DBM125 HSS Metric DRILL bit set 
Item DB129B HSS Steel DRILL bit set

Item VWB800B 8 piece carbide set 
Item VWB700 8 piece carbide set

Items DB160B 60piece wire gauge drill bits set 
Item DBA126A Letter size drill bit set

12pc Pin and Starter Punch set with roll up pouch.
Appears as NIP.

Item number SSDM230. Box measures 9x5.
Come with long snap on multi-head screwdriver item number SSDM80B

Model 41451
SAE
Measures 24x13

 10pc Metric Hex Allen Key Wrench Set C15B with case

4 each with different torque values.

3 each.
Item 90233 x 2
Item 93950

Time-Life books and individual topics. One lot.

Model 163-4700. Overall measurement 57x36x28.
New sanding discs and belts included.

Approx. 20 each. No shipping available.

Central Pneumatic item number 39170. Comes wit potters quality impact beads, sealed and 1 Model C Sandy JET Abrasive Blaster. As is.
Bead Blaster measures approximately 57x36x23.

Includes carpentry, how to's, garden and pets. No shipping.

Simmer No. M40 Water pump.
Garden hose, husky medium drain bladders

11 Railroad ties.
HC S Stamping

Pvc pipe, fittings and tools

Aluminum Folts Billets
Have not been able to identify these pieces in general

Warner 8ft fiberglass ladder 6208.

6ft aluminum ladder and extension ladder

Haulmaster 600lb appliance hand truck. 65685

Pride Victory LX sport Mobility scooter.
Fully functional with charger

Permeability C300 Electric wheel chair. Does not hold a charge. Needs battery and charger

KneeRover and Nova Knee scooters

Various gauges.

With 2 wedges

Includes shovels, rake, garden sprayer, plant food and tub.

Unk model number on mower.
Edger item model number 300, power trim.

1. Sunjoe electric tiller, item TJ603 
2. Merry Tiller exporter with Kohler engine model number K91.

With I wheel barrel included 
Trollies measure 50 and 42 inch wide.

4 gas cans and 10 cement floats.
Also includes 1 shop light LED with cool white bulbs. 6 T8 in the box.

Twin tanks. Measures 30 x 23.

8 inch.Item number 40668. Comes with stand and measures approximately 32x26x19.
2 additional wood reinforcements.

Base measures approximately 32x24x25.
4 new blades and manual

6 inch. Item number 94393 comes with stand.

Model number 315-25840. With Original case.
Measures 16x10x3.
Comes with a Dremel Multipro model 395. In case.

18 ga. Item number 42332

With one rotozip tool hole master by Buffalo tools. 
Chicago 3-8 VRS DRILL 
Black and Decker roller bearing drill
3 items total

Item 69573

Includes 3-8 close quarter drill, item 92956.
3- variable speed reversible drill, item 60614,
4- 1-2 angle grinder.

Includes 1 Chicago 7 1-4 circular saw with one additional blade.
2 items to the lot

3.5 amp 
Model JS55G1B

Item number 61737

Comes with long paint or cement mixing blade.

Model number 286.26829.  With accessories
Appears NIP.

Model number U346

Central Pneumatic Twin-Tank compressor. Item number 42321. With light weight cord. With gauge and air connection.

Model number 315-25060, with case and a few accessories.

U.S. General model number US660V

Item 06932

Talon Trisecta 3 cycle garden shredder. T 38014

Big Red 2 Ton Engine hoist and S-5402 load leveling bar. 
 

PIC design corporation case filled with precision parts

Bauer 14in abrasive cut off saw 20713E-B. Extra disc included.

Lyman Turbo 1200 and Midway 2094 tumblers.
Comes with RCBS brand MEDIA SEPARATOR and basket

Gray steel tool box with contents.
Large Snap on puller set, gauges, wiring

Chameleon welding mask, sand blasting helmet, face shield and welding accessories

Campbell Hausfeld Water Wizard 1300psi electric pressure washer

16 gallon Wet/Dry shop vac. 4.0 peak HP

19 C clamps and 2 Pulleys. Body clamps.

Lester Electrical brand. Model number 18330. 3 pin.  General purpose deep-cycle charging applications.  
Note: Could be used with mobility chairs.

Small CRAFTSMAN stapler, 059 with staples.
Hammer Tacker model 755 with additional staples.

Box measures 15x6x3. 20 different size tips. No brand noted.
Appears as NIB. Mini bonus box included.

Pittsburgh 28 pc. ratcheting set.
2 Pittsburgh 9 pc combo set.
10 singles with both metric and standard sizes.

North Western tools. 4,2,1 inch. In original box.
Also 1 adjustable magnet holder, item 47075.

Unknown brand.
Measures 10x4x1

Measures 8x5x4.
No brand name noted. Number. 4

Viking model 161-2010

Measures 12 x 8.
Appears new.

1 Pana VISE, measures 6x7 
1 show fox, measures 12x9

4 each. Come with 1 power sentry strip.

2 extension cords. 2 Xl cords with circuit box and 2 surge protector power strip cords.

 I have no history for this item. Found and as is. 

Clamps, hand saws, hack saw, screwdrivers.
Peg board measures 48x54

Central Machinery with Rev. Head. Item T34706
Comes with turning tool set and leather shop apron.

Model number E-7 P. Comes with stand.
1/2 HP
3450 RPM
SINGLE PHASE

WEG Brand.
.Unknown condition

With Black and Decker guard,. 12 inch.

Measures 27x14x9

13 files. 2 sets of Pittsburg chisels, 1 detail brush set, 5 sets of blades.
Mixed lot.

PEG included. Measures 33 x 48. Buffing pads, compounds, hand tools.

2 each. Measures 28 tall. Rollers are 12 inch width

3 sets includes standard, and metric.

10 hammers and 3 pry bars

2 boxes measuring 12x12 of wood shop and metal hand tools.

CART measures 33x32x16.
Contains electrical boxes, hardware, capacitors.
Also electrical accessories located in gray cabinet, 2nd drawer.

Boxes of screws and hardware
2 locations

Drill bit set, Countersink set and hole saw set.

Pittsburgh S3994 21 Piece 3-4 Socket set

Central Machinery 2485 1x30 belt Sander.
Power cord has been cut off for some reason.

Master Appliance Heat Gun.
Chicago Electric Soldering Iron

Item number 45690 230v Spot Welder

Sears Craftsman air hammer with case and accessories. Senco air nailer with leather strap

Contains various hand tools. Measures 18x14x5.

Chicago Electric model number 67537

With 3-16 x25 foot cable and hook. Lightweight

Chicago Electric item number 41983

Wagner airless paint sprayer. 2 extension cords, box of paint brushes, loose sand paper.  
Ryobi palm sander item  RS-112 and one craftsmanship belt sander.

This hand cart comes with 1 Rigid pipe clamp, 1-8 to 2 1-4 inch. 1 standard VISE, measuring 10x6. Rigid 12-R, RIGID HD 24 IN H PIPE WRENCH, Rigid no 1-2 and a variety of pipe cutters. 1 inch, 1-2, 1-8, 1 1-4, 2 inch and 1.5 inch.

Q-2

Item number 95703

Chicago Electric electric saw blade sharpener. Model 96687. Appears never been used.

Measures 24x48. Hoses, screwdrivers shovel punch set, Pittsburg strap wrenches.

Measures 24 inch tall by 12 inch round.

Central Pneumatic air Tools and accessories. Riveter, nailer, hammer.

Allied air drill. Alltrade air ratchets

Includes washers, nuts, electrical  wire wraps.
Location:  rear upper cabinets

Roper Whitney Pexto Model 17 5 Ton Punch

Located rear wall right side of white test bench. PEG BOARD measures 22x48. 4 pegs of tools total.

Diamond Brand 150MM Multi purpose vice.

Full assortment as photographed. Tool box measures 18x9x8.

1. 3 inch galvanized
1. 3 inch basic bright

Roper-Whitney Punch and Jensen-Whitney Punch.

USM PRG-111 Rivet tool with rivets.

Unger Brothers WEQ 2hp electric motor. untested.

Minarik speed control w83. Dolan-Jenner Fiber-Lite series 180

Toshiba MODEL NUMBER B0016FGF2AA. untested.

Measures 36x27x18. MEDALLION SERIES. Contains tail pope exhaust stretcher, clamps, retaining rings, glue guns, cable ties, fog shields,

Model HD 880.
Comes with 1 original box. Measures 41x16x12. All in original condition

Measures approx 36 in tall overall

Corsair, P-40, Spitfire, Junkers, P-51D
All sealed.

2 each. 1-144 scale. Sealed. MK-1 ArvoLancaster, and B-×4 Liberator.

1. PT-109 
2. USS Helena 
3. USS MISSOURI

1:48 scale. Sealed.

1:48 scale. Sealed. I item is 1:72 scale.
All 3 are sealed.

1-72 scale. Sealed.

Monogram Texan AT-6

Italeri RF-4CE Phantom 11

Monogram A-1H Shyraider

Model 5004.
2 each to the lot.

Model 482A, I.C.P. 
2 each.

Mag 77 in original box

12 each ranging from 6 inch, 4 inch, 3 inch.

Tamron AF 90 to 300 mm, lens, bag, and flash.

Model CE-5000PRW. Project runway limited Edition computerized sewing machine

With cord.

American Atelier 1992
C and R stars
12 dish plates, 4 salad plates, 7 small dish plates.

MEN'S Waverider II brown
size 13 M

MEN'S Memory foam RUG EXP Journey II MF WD 13 4E

MEN'S Performance foot wear size 13 M

Mens size 14 W

Could be used for CD, DVD, movies. Measures 48x15x8.

4 drawer solid hardwood, oak in color measures 45x35x19

4 drawer, blond oak in color, measures 44x30x18

5ft x 3ft, 30in tall
Made in Iowa

Rack full of cooking equipment, ice maker, hobart mixer.

Hunter traditional series TRL-01 Model 23614. New in box

Pachmayr case with Bushnell Mounted Spotting scope.

Remington clay thrower, white flyer clay targets, box full of law enforcement targets and Caldwell shoot and see targets

Folding gun stand, Decker rest, San Angelo Rest

Midway bag, shooting glasses, locks, how-to dvd's.

Please no shipping

Measures 60 x 48 x 24. Note: we have a pallet jack, ROLLING BAR and pallet available, only.
Bring your help for moving.
Combination available

Storage cabinet with wood workbench top. Keys and small vice included. Other contents not included. 4ft x 2ft, 3ft tall

Storage cabinet with wood workbench top. 4ft x 2ft, 3ft tall. One drawer is not able to fully close.

Model SM77. 12 ga.

MEC 600 Jr. Mark V Loader. Setup for 410 Gauge shotgun shells

MEC 600 Jr. Loader. Setup for 20 Gauge shotgun shells

MEC 600 Jr. Mark V Loader. Setup for 16 Gauge shotgun shells

4 MEC E-Z PAK SHOTGUN SHELL STACKERS

2 hull vices with extra jaws, vintage 12g crimper

2 MEC Model SS77 Super Sizers mounted to a board. Extra dies included.

2 forster products case trimmers with accessories

Small arbor style presses. Custom products stamp on one.

Lyman shell holders in plastic case. 4 Lyman dies

Bag of Redding dies, mixed sizes

RCBS 5 10 Powder Scale

RCBS Automatic Priming tool with Extra Primer tubes

RCBS Uniflow powder measure and Powder Trickler

RCBS Rock Chucker reloading and case forming press.
Lee Auto Prime II

RCBS Single Stage Press

9 charge bars and various inserts

50BMG Primer Tool and dies

Bin full of Lee Products. Hand press, auto prime, shell holder set

10 RCBS Reloading dies. Rifle calibers

8 RCBS Reloading dies and Lee Dies. Rifle calibers

6 RCBS Reloading dies. RCBS kinetic puller. Pistol Calibers

8 boxes of Lee Precision Dies.
Pistol calibers

5 boxes of Lee Precision Dies. Rifle calibers

Measures 39x42x 24 with contents.

4 loading Trays, 3 plastic one wood

Model number DS02000 series digital oscilloscope.

Located in front shop area.

Approximately 3x1 3-8 x 3-4. Bricks are 4x8x2, lead sheeting, cart measures 36x24x32. Located in rear garage area.

Approximately 3x1 3-8 x 3-4. Located in master garage.

With strapping. No model number noted.

ITEM Number T30039.  2.5 ton
This item will need to be the last for pick up so we can use it for the safe.

Air load reach scraper
Stock number 7073.

Model 8567. Small bore shotgun

Model 8567, grabber. Medium bore shotgun. Possibly 20, unk.

Model 880. 10 ga.

Model 650 85. Small bore.

Model 8567. Small bore.

28 ga.

Model 375. 12 ga.

Aluminum, lead shot

Aluminum, lead shot. 5 each.

Lead shot, aluminum.

Aluminum, lead shot. 14 each.

Measures 13 in tall, 8 inch wide.

Aluminum,lead shot. 5 each.

FIrearms loading materials such as MEC Case conditioner, rownells shotgun bore, small press, shell presses, steel wool pkg, cork installer, struts, capper, various oils, lead shot reloader kit.

410., 9mm and 12 ga.

Aluminum, lead shot 5 each.

Large animal. Approx 36 inch.

Inclide automotive, household, car jumper cables, tennis ball shaggy, small qty of hardware.

15 lb bottles UN 1075. Coleman lantern, item number 5114B700. Includes Mr. Heater head. Propane full one one tank

1. Browning travel vault, measures 36 x 13 3-3 x 3.5 
2. Rifle protector, measures 52 in long.
3. Dosko sport, measures 52 in long.