Premier Firearms Auction - Spring 2024
Previous Page Listing ID#: 1605451

Auction Location

Plantsville, CT 06479
Auction Dates and TimesSALE IS COMPLETED
Saturday Apr 27, 2024 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Connecticut Firearms Auction

Website: www.ctfirearmsauction.com

GoToAuction.com ID#: 8254
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Connecticut Firearms Auction Terms of Sale All bidders are required to read the Terms and Conditions of the Sale before bidding with Connecticut Firearms Auction LLC and/ or CT Firearms Auction collectively referred to below as �CTFA�. Those who bid are bound by these Terms and Conditions of the Sale, as amended by any oral announcement, published or posted notices, which together form the contract of the sale between the successful bidder �buyer�, �CTFA� and seller �consignor� of the lot. ACCEPTANCE OF TERMS: When bidding on any lot offered by CTFA, the bidder indicates acceptance of the following Terms of Sale. Any participation in the auction binds the bidder to agreement of these terms whether or not buyer has read or understood said terms. The terms in writing contained herein are subject to change without notice and bidder agrees that the most recently published Terms of Sale as published or amended on the website at the beginning of the auction shall apply. BIDDER ELIGIBILITY AND REGISTRATION: Buyers warrant that they are at least age 18 and possess a valid photo ID. Buyers are required to provide a verifiable address of residence, phone number, and email in writing at least 48 hours prior to auction date. Long guns will only be sold to persons 18 years of age, or older. Handguns will only be sold to those persons 21 years of age or older. It is the bidder�s responsibility to take buyers premium, shipping, and insurance costs into consideration when bidding on items. It is the buyers responsibility to personally inspect auction items, or request condition reports and detailed questions prior to bidding. TITLE: Title to all merchandise shall pass to the highest bidder at the fall of the auctioneer�s hammer. The buyer will then assume all risk and full responsibility of the lot purchased once ownership has changed. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. BUYER�S PREMIUM: A buyers premium will be added to all successful bids and is payable by the buyer as part of the total purchase cost. Base buyers premium (phone, live in-person and in-house absentee) of 18% applies to phone and direct absentee bidding.This is the lowest buyers premium offered, and all bids must be submitted at least 24 hours prior to auction time. A 3% discount is offered for cash, check, wire, and money order payments. Buyers premium for bidding through all online platforms (including www.ctfirearmsauction.com) is 21 % with a 3% discount for cash equivalent. A 3% Discount applies for Cash or Check Equivalent. Split payment methods (cash/credit) lose 3% discount. Buyers premium is non-negotiable. Split payment methods (cash/credit) lose 3% discount. LIMITED GUARANTEE: CTFA makes every effort to accurately describe all items offered in its sales. The descriptions and condition reports carry a limited guarantee. It is a guarantee to protect the buyer against errors in descriptive fact and major discrepancies that would have a significant effect upon the value of the item. This limited guarantee covers the following: DESCRIPTIVE FACTS: Manufacturer, model, caliber, serial numbers, barrel length, special features, major restoration, modification, counterfeits, reproductions or major fabrications not disclosed in the description. CONDITION DISCREPANCIES: It is the bidder�s responsibility (present, online, or absentee bidders) to determine by inspection by themselves (or a hired professional) the exact condition of each item prior to bidding on the item. CTFA makes every effort to follow the commonly accepted and current condition guidelines for modern and antique firearms such as the NRA Modern and Antique grading system, Blue Book percentage of finish rating, and Standard Catalog of Firearms Modern grading. It is important to note that these systems have changed over the years, and present different opinions based on the edition and authors. Condition reports are the opinion of CTFA and represent the observations of the cataloger. BIDDERS RESPONSIBILITIES: It is the bidder�s responsibility to initiate contact with CTFA in request for additional information regarding the items. Submit all questions regarding upcoming auction items at least 48 hours prior to the date of auction. CTFA will make every effort to answer all submitted questions in a timely manner. In-Person Bidders must examine all items prior to purchase and again upon receipt. Any discrepancies must be noted prior to leaving the facility. If bidding via absentee or online, then it is the bidders responsibility to examine the lot immediately upon receipt. If a major discrepancy should be discovered, it is the buyers responsibility to contact us immediately. The limited guarantee is null and void 28 days after the auction date (NOT THE DATE OF RECEIPT). If a buyer pays late and receives items late, through action or inaction on their part, the buyer is disqualified from any guarantee. Under no circumstances will CTFA be responsible for lost profits or other financial damages. If it is agreed that an item may be returned, it is the buyer's responsibility to return it in the same state and condition as received. Returned items that are modified, damaged by buyer, or mishandled void all guarantees. LIMITATIONS: The limited guarantee covers major discrepancies in condition reports, such as error in fact, visible repairs or restorations, or major differences in percent of finish or bore(+/- 20%). This limited guarantee is only available to the buyer of record. Please refer to POST SALE RETURN POLICY. Except as stated in the limited guarantee above, CTFA will not be held responsible for typographical errors or errors of omission. This limited guarantee does NOT cover imperfections, patina, slight damages, handling marks, natural imperfections, undisclosed minor blemishes, finish differences, wood-to-metal fit issues, surface cracks or chips in wood, dings and dents, unverifiable age, and other similar differences that are inherent in the firearms or other antiques and collectibles offered for sale. Firearm internal mechanisms and moving parts are not inspected, and guns are not test fired unless otherwise noted. If mechanical or other working parts are inoperable, even if working at the time of sale, CTFA is not liable due to the inherent nature of the age of these used items. CTFA will not be responsible for shipping costs, after auction appraisal fees, testing or any other post auction costs. This limited guarantee DOES NOT APPLY to any ammunition whatsoever. All Ammunition will be sold �as-is� (see below) AS-IS: Auction lots and items offered with the designation �AS-IS�, �Poor condition�,or �For parts or restoration� are offered without guarantee, all sales are final and sold without refund or buyer recourse. POST SALE RETURN AND REFUND POLICY: If a major description or condition discrepancy is discovered within 28 calendar days of the auction, a buyer may submit a request in writing for a full refund under the following conditions: The request for refund must be received in writing before the end of the 28th day. The auction lot in question must be received by CTFA within 3 days of the request for return and refund. After receipt of the lot in question, CTFA will perform an evaluation, and determine the validity of the request. If a return and refund is granted, CTFA will notify the buyer within 7 calendar days of receipt. CTFA does not offer adjustments or partial refunds. Refunds are only given for the total hammer price, and restocking fees up to the total amount of buyers premium may apply. Accepted refunds are paid only by paper check, and submitted to the buyer 30 days after receipt of items. FIREARMS TRANSFER AND ELIGIBILITY: All firearm transfers will be in strict accordance with all International, Federal, State and local laws. Buyer is responsible for adhering to all country, state and local laws before bidding. If a bidder is unable to import, purchase, own, or receive a firearm for any reason, they should not bid on these items. If a buyer later determines they cannot legally own a firearm or accept delivery, the bid is still a valid contract, and the buyer is still obligated to remit payment in accordance with payment terms. CTFA does not offer returns, refunds or cancellations on the basis of ineligibility or failure to facilitate transfer. BUYER OF RECORD: All firearms must transfer to the registered buyer on record. CTFA will not modify, or re-invoice any firearms for another party. DENIAL OF TRANSFER: If �Denied� by FBI / NICS background check buyers will not be able to take possession of the firearm and the firearm will be consigned to the next available firearm auction. Dealers and Individuals that bid on and win items own the items and are fully responsible for payment within terms regardless of whether the FBI / NICS approves their taking physical possession of the items. CTFA will not cancel the sale due to disapproval for any reason. If a buyer is appealing a �Denied� decision, we will hold the firearm for a grace period of 30 days, with monthly storage fees in effect on the 31st day. IN-PERSON PAYMENT AND PICKUP: Only the person to whom the bidder number is registered may accept transfer of the firearm(s) at the conclusion of the sale � Federal Law disallows anyone else from accepting the transfer. Buyers may not bid on or pay for modern firearms on behalf of another party. Modern Firearms (1898 and later) Can be picked up in person with a valid CT Pistol Permit or applicable Certificate Can be picked up by FFL Licensee or listed responsible person with �Live Copy� of License Eligible Curio & Relic Firearms can be picked by by C&R Holders with �Live Copy� of license. Non Connecticut Residents (without FFL or C&R) may not pick up modern or NFA firearms in person at our CT Facility. Antique Firearms Can be picked up in person with valid photo ID by persons over the age of 18. No background check required, all states of residence eligible. Non-Guns may be picked up by any eligible buyer (or buyers agent) with a valid photo ID. Ammunition: Any buyer receiving ammunition in the State of CT must possess a Valid CT Pistol Permit, Long Gun Certificate, or Ammunition Certificate per state laws. SHIPPING: Shipping and transportation costs are the responsibility of the buyer. Unless otherwise noted, all items shipped in-house, and will be billed on your invoice. Modern firearms are legally required to be shipped to a BATF licensed FFL business within their state of residence for transfer. For states that allow shipment of C&R firearms to the C&R license holder, CTFA reserves the right to ship those C&R firearms to the address listed on C&R license. Modern handguns only ship via UPS 2-Day Air or U.S.P.S. Priority Mail. Modern long guns are shipped via UPS ground. IT IS THE BUYERS RESPONSIBILITY TO CONTACT THEIR RECEIVING FFL AND ARRANGE TRANSFER AND FFL REMITTANCE. The receiving dealer must submit a current copy of their FFL for each auction invoice. FFL�s are not kept on file. FFL�s should be submitted to sales@ctfirearmsauction.com or through our website here: https://ctfirearmsauction.com/submit-your-ffl/ FEES: Standard Hand Guns ship for $40. Standard long guns ship for $55. Oversize shipping charges will apply to guns over 45� Overall Length. Additional fees apply for shipping addresses outside the Continental United States. DISASSEMBLY: Firearms, auction items, and accessories may be disassembled for shipping. This may include scopes, cases, barrels, and stocks. ADDRESS: CTFA is not responsible for incorrect shipping addresses. Buyers must verify the shipping address listed on their invoice prior to shipment. Standard items packed internally by CTFA will ship approximately one to fourteen business days after payment AND applicable paperwork (FFL) is received. INSURANCE: All firearms in transit are insured at no additional cost up to $2,500 per shipment. Packages valued over $2,500 require insurance at a rate of 1% per invoiced dollar unless the buyer declines in writing 48 hours prior to package shipment. OVERSIZE: Certain auction items exceed standard shipping fees and may require oversized and heavy shipping surcharges. Every effort is made to note these charges prior to catalog publication, but may be included on a buyers invoice post auction without notice. AMMUNITION: Ammunition does not ship with an associated gun. Separate charges apply for ammunition shipments, and may require heavy or oversize charges. INTERNATIONAL: CTFA welcomes international buyers. CTFA can provide, upon request, recommended firearms exporters and international shippers. It shall be the potential buyer�s sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property and for paying all shipping costs, customs and duties on the items. By law, CTFA cannot, and will not, declare lesser values for any international purchases and all shipments will include the invoice with purchase totals including the buyer�s premium and shipping cost. CTFA does not offer in-house international shipping (or export) any firearms, ammunition, or weapons REGARDLESS OF AGE OR STATUS OF THE LOT. All international shipping must be performed by a licensed exporter or third party shipper. CTFA does offer domestic shipping to the exporter of the buyer's choice. Buyer is responsible for contacting and employing the exporter. Exporter FFL documents must be sent to sales@ctfirearmsauction.com prior to domestic shipment. CTFA strongly recommends making contact with an exporter prior to bidding for pricing, process and timeline information. GOODS MADE FROM OR CONTAINING MATERIALS FROM PROTECTED SPECIES: CTFA does not accept any responsibility or liability for the sale of items containing materials from protected species or for any omission in marking or labeling goods as containing materials from protected species. Such material includes, but is not limited to, ivory from elephants and walruses, tortoise shell, crocodile skin, whalebone, rhinoceros horn, some species of coral and certain woods. Restrictions on the importation, exportation, sale, transfer, and/or possession of goods containing materials from protected species derive from international, federal, and state laws and regulations promulgated thereunder. Laws include, but are not limited to, the Convention on International Trade in Endangered Species of Flora and Fauna (CITES), the Endangered Species Act (ESA) and the Marine Mammals Protection Act (MMPA). States currently restricting trade of protected species include, but are not limited to, California, New York and New Jersey. Prospective buyers are on notice that several countries completely prohibit importation of property made, all or in part, of protected materials. Some countries require special permits, such as a CITES permit, from the relevant regulating authority in the countries of exportation and importation as well. Potential buyers intending to import the property into another country should be familiar with the relevant customs laws and regulations prior to bidding on goods containing material from protected species. Regulations may vary as the U.S. generally prohibits importation of articles containing material(s) from species it has designated endangered or threatened if the articles are less than 100 years old, subject to certain exceptions. It shall be the potential buyer�s sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property as described in the aforementioned paragraphs. All buyers agree to comply with any and all domestic and international restrictions on the trade of protected species as a condition of the sale. Please note that the ability to obtain an export license or certificate does not ensure the ability to obtain an import license or certificate in another country, and vice versa. It is the buyer�s responsibility to obtain any export or import licenses and/or certificates as well as any other required documentation. CTFA is not able to assist the buyer in attempting to obtain the appropriate licenses and/or certificates, and there is no assurance that an export license or certificate can be obtained. The inability or delay in obtaining permits, licenses or other permissions to import or export goods containing material from protected species will not constitute a basis for rescission or cancellation of the sale of said goods or the delay in payment of purchased items in accordance with these Bidder Terms and Conditions. BIDDING TERMS: The auctioneer will determine the highest bidder. The auctioneer alone has the right to reopen the bidding of an item at any time if deemed necessary due to a dispute. If there is a tie bid between the floor and Internet or absentee bid, the floor bid takes precedence. In the event of a tie internet bid, the auctioneer will choose the highest bidder. CTFA and its representatives reserve the right to remove those attendees who impede preview and/or the auction. CTFA is not responsible for any errors in bids, omissions of bids, or failure to execute bids and shall have no liability to any bidder for any technical or other failure associated with internet, absentee bidding, or telephone bidding. In the event of an on-site utilities or internet services interruption, the auction will be suspended until such a time that the utility can be restored. Consignors are not allowed to bid on their own merchandise nor have any agent bid on their behalf. If the Auctioneer recognizes such bidding, the Auctioneer reserves the right to withdraw any or all items consigned by the offending consignor. ABSENTEE BIDDING: CTFA will accept absentee bids if pre-authorized by mail, phone, email, online, or in-person. In-Person absentee bidders must use the absentee bid form and clearly mark the lot number, title and maximum bid amount. If there are two (2) identical bids placed on the same item, priority will be given to the first bid received. All bids must be left in increments as published for that particular auction. If a bid is �out of increment,� the auctioneer will automatically round the bid down to the next correct increment. Seller(s) agree to allow the Auctioneer to accept and execute absentee bids in a competitive manner for potential buyers and under the CTFA absentee bidding terms and conditions. During the live sale, the auctioneer will execute absentee bids competitively (starting with the lowest possible bid point) up to the maximum amount indicated. ONLINE BIDDING: Online bidding through www.CTfirearmsauction.com, Live Auctioneers, Invaluable, Hibid, Proxibid, or other bidding platforms may be available. These terms and conditions apply, as well as additional terms and conditions for each third-party platform. These Terms & Conditions will take deference over any posted online terms and agreements. A surcharge may be added for third party online platforms. Refer to the bidding platform of choice for the final buyer�s premium. If there is a tie bid between the internet bidding venues and the floor, the floor bid takes precedence. Due to our fast paced auctions and bids coming from floor bidders, phone bidders, Internet bidders and absentee bids, the auctioneer has the final word on all item(s) sold. The bidder assumes the risk of winning an item online and discovering the item has sold to another bidder. This is due to the final call of the auctioneer and the operator not being able to re-open that lot. Registered Online bidders are fully responsible for accidental bidding as if they bid normally. BID RESULTS: CTFA will only contact successful bidders. Invoices are sent within 24 hours of auction end. The invoice will include the lot info, hammer price, premium, shipping, insurance, and any other charges that apply. Please hold phone inquiries regarding bid success until after receiving the invoice. For verifications, CTFA cannot provide winning bid information until the second business day after the auction. CTFA will not provide bidder information to any outside sources. TELEPHONE BIDDING: Requests for phone lines must be received at least three (3) days prior to the auction date. CTFA cannot guarantee phone lines but will make every attempt to accommodate those who wish to participate live via phones. Phone lines are provided to qualified bidders at CTFA's preference. Please contact us directly to arrange phone bidding.203-710-0189. Minimum bid requirements may apply. BIDDERS PRESENT AND TAKING ITEMS DURING AND AFTER AUCTION: Since item liability transfers upon a successful bid, items paid for must be packed, transported and/or removed by the buyer at his/ her own risk after the close of the sale. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. If any employee or agent of CTFA shall pack or transport the merchandise, it is fully at the risk and responsibility and expense of the buyer. CTFA shall not be held liable for any loss or damage that may be caused by the said agent or employee. RESERVES: The majority of our items are unreserved, but occasionally items may carry a moderate reserve. Please note that when a lot carries a reserve, the reserve is at or below the low estimate. In the case of a reserved item, the seller has authorized the auctioneer to bid on their behalf until the reserve price is reached. The auctioneer will note if a buyer is bidding against the reserve. PAYMENT TERMS: CTFA accepts Visa, MasterCard, Discover, American Express, personal checks, certified checks, wire transfers, money orders, and cash. Any invoice totaling more than $50,000 must be paid within three (3) business days of the auction date. All other merchandise must be paid in full within seven (7) days of the date of the invoice.Upon payment in full, it is the bidder�s responsibility to submit any additional information necessary, including an FFL, to initiate transfer and shipping. Invoices over $5,000 may be subject to mandatory check or wire payment. All transaction fees associated with payment method are non-refundable. All goods not retrieved by buyer within 30 days after the invoice date, shall be subject to a storage fee of $50 per item per month. Buyer authorizes CTFA to sell, at their standard commission and consignment contract terms, any goods not retrieved after a 90 day period in any manner deemed appropriate by CTFA and the proceeds will be applied to any outstanding balance due from the buyer. CREDIT CARDS: Link for online credit card payment will be listed in the buyers invoice. Credit Card payments are subject to maximum buyers premium, and can be discounted by 3% if payment is received by cash, check, money order or wire transfer. Credit Card payments are only accepted from the buyers name listed on the invoice. CTFA reserves the right to refuse to ship to a different address than the billing address on the credit card being used. CTFA does not allow credit card chargebacks for any reason and any delivered firearms subject to a chargeback will be considered as a stolen gun and reported immediately to Law Enforcement. Credit cards information is not stored and payment for invoices is the buyers responsibility. We do not use third party billing services and the buyers credit card will not be automatically charged. CHECK: There will be a $40.00 service charge for returned checks. Make checks payable to: CT Firearms Auction LLC. Checks can be mailed to: CT Firearms Auction LLC 8 Metals Drive, Plantsville CT 06479. CTFA reserves the right to hold items paid for by personal or company check until said check clears (14 days). CTFA has the right to hold all checks over $2,000. Customers who have an established successful buying history with CTFA may be exempt from this requirement. First time buyers paying by check may be subject to additional requirements such as bank letter of credit. WIRE TRANSFERS: Wire transfers are accepted for invoices totalling more than $5,000 USD. Invoices below $5,000 may be subject to a $30 transaction fee. NON-PAYMENT: In the few situations where a successful bidder does not remit payment when due, CTFA will proceed with the legal steps necessary to protect its interests and will block the bidder from future auction participation. SALES TAX: CTFA is required to collect sales tax where applicable. It is the bidder�s responsibility to know the sales and use tax law in their locality and know what sales and use tax will be due upon their purchase. Lots are subject to all applicable state and local taxes, unless appropriate resale permits are on file with CTFA prior to invoicing. Bidder agrees to pay CTFA the actual amount of tax due in the event that sales tax is not properly collected due to: 1) an expired, inaccurate, or inappropriate tax certificate or declaration, 2) an incorrect interpretation of the applicable statute, 3) or any other reason. The appropriate form or certificate must be on file and verified by CTFA five days prior to Auction, or tax must be paid; only if such form or certificate is received by CTFA within 4 days after the Auction can a refund of tax paid be made. Lots from different auctions may not be aggregated for sales tax purposes. NFA TRANSFERS: National Firearms Act Weapons and Destructive Devices (DD) Processing to Dealers: Buyer must provide CTFA with a copy of their receiving dealers active FFL and their SOT. Estimated time for processing and approval of the required Form 3 can take 3 days to 3 months, dealer to dealer via E-File is usually less than a week. Individuals IN CT: Law requires a completed Form 4, or Form 5 for deactivated guns. CTFA will prepare and sign the front of the applicable transfer form, and send to the individual buyer or meet with them directly. Individuals are responsible for completing requirements for fingerprints and photo, as well as completing applicable portions of the reverse side of the form. Estimated time for processing and approval of Form 4 is 6-12+ months.Dealers and Individuals that bid on and win NFA or DD items own the items and are fully responsible for payment within terms regardless of whether the BATF approves their taking physical possession of the items. CTFA will not cancel the sale due to BATF disapproval for any reason. SAFETY: Since all firearms sold are �collectible� items, CTFA does not test the safety or warrant functionality of these firearms. All firearm purchases should be examined by a certified gunsmith prior to shooting. DENIAL OF SALE: CTFA reserves the right to deny the sale of a firearm to any buyer, for any reason, at any time in the sales process. WITHDRAWAL OF PROPERTY: CTFA reserves the right to withdraw any property from the auction at any time and shall have no liability whatsoever for such withdrawal. DEFINITIONS: CURIO & RELIC (C&R): Per BATF: To be recognized as C&R items, 478.11 specifies that firearms must fall within one of the following categories: Firearms which were manufactured at least 50 years prior to the current date, but not including replicas of such firearms; Firearms which are certified by the curator of a municipal, State, or Federal museum which exhibits firearms to be curios or relics of museum interest; and Any other firearms which derive a substantial part of their monetary value from the fact that they are novel, rare, bizarre, or because of their association with some historical figure, period, or event. Firearms automatically attain C&R status when they are 50 years old. Any firearm that is at least 50 years old, and in its original configuration, would qualify as a C&R firearm. It is not necessary for such firearms to be listed in ATF�s C&R list. ANTIQUE FIREARMS: Per BATF: The term �antique firearm� means� any firearm (including any firearm with a matchlock, flintlock, percussion cap, or similar type of ignition system) manufactured in or before 1898; or any replica of any firearm described in subparagraph (A) if such replica� is not designed or redesigned for using rimfire or conventional centerfire fixed ammunition, or uses rimfire or conventional centerfire fixed ammunition which is no longer manufactured in the United States and which is not readily available in the ordinary channels of commercial trade; or any muzzle loading rifle, muzzle loading shotgun, or muzzle loading pistol, which is designed to use black powder, or a black powder substitute, and which cannot use fixed ammunition. For purposes of this subparagraph, the term �antique firearm� shall not include any weapon which incorporates a firearm frame or receiver, any firearm which is converted into a muzzle loading weapon, or any muzzle loading weapon which can be readily converted to fire fixed ammunition by replacing the barrel, bolt, breechblock, or any combination thereof.� FFL: Federal Firearms Licensee with a current and valid license to be a firearms Dealer / Manufacturer / Importer CURIO & RELIC HOLDER: FFL type 03 or C&R license or Collector NFA (National Firearms Act of 1934) Weapons (commonly called �Class 3�): A shotgun having a barrel or barrels of less than 18 inches in length; A weapon made from a shotgun if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 18 inches in length; A rifle having a barrel or barrels of less than 16 inches in length; A weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length; Any other weapon, as defined in subsection (e); A machine gun; Any silencer (as defined in section 921 of title 18, United States Code); and A destructive device. DESTRUCTIVE DEVICES: A missile having an explosive or incendiary charge of more than 1/4 oz. Any type of weapon by whatever name known which will, or which may readily be converted to expel a projectile, by the action of an explosive or other propellant, the barrel or barrels of which have a bore greater than one-half inch in diameter. A combination of parts designed and intended for use in converting a device into a destructive device and from which a destructive device can be readily assembled. MODERN FIREARMS: Any firearm that does not already classify as a C&R, NFA Weapon or Antique and is under the purview of the Gun Control Act of 1968.
Listing Information
Our Annual Spring Premier Firearms and Military Auction. Featuring Colt, Smith & Wesson, Antiques, World War Two, NFA and Fully Transferable Machine Guns, Hunting Rifles and Fine Shotguns.

1
Browning Hi Power 9mm Semi Auto Pistol
Description Browning Hi-Power in 9mm with two, thirteen round removable magazines and a 4.75" barrel. Made in Belgium and assembled in Portugal. Smooth laminated wood grip plates. Blued frame, trigger, hammer and serrated slide. Lower left side of fr...

2
Factory Engraved Browning Hi Power Renaissance 9mm
Description Browning Hi Power Renaissance chambered in 9mm with one, thirteen round removable magazine and a 4.7" barrel. Manufactured around 1968-1969 right before the serial number transition in 1969, with serial number T261150. Nearly full satin n...

3
Les Baer 1911 Premier II 6" 9mm Custom 1911
Description Les Baer 1911 Premier II chambered in 9mm with three, nine round removable magazines and a 6" match barrel with stainless bushing. Baer NM checkered steel frame with checkered wood grips and beveled mag well. Ambidextrious manual thumb sa...

4
Les Baer Premier II Super Tac .45 Custom 1911
Description Les Baer Premier II Super Tac chambered in .45 ACP with four, eight round removable magazines and a 5" match barrel. Baer NM checkered steel frame with checkered wood grips and beveled magazine well. Tactical ambidextrous manual thumb saf...

5
Mateba 6 Unica .357 Mag Revolver
Description UPDATE: TWO additional barrels have been added(8" & 4") that can readily convert this gun without a gunsmith, pictures added at end of reel. Barrels as new.... Mateba 6 Unica Auto-Revolver in .357 Magnum with a six round capacity and a 6"...

6
Magnum Research BFR .45 Colt/.410 Revolver
Description Magnum Research BFT chambered in .45 colt and .410 bore with a six-shot cylinder and 7.5" vented rib barrel with modified choke. Stainless steel barrel, frame, unfluted long cylinder, single action trigger and hammer. Smooth Bisley style ...

7
Magnum Research BFR .45-70 Govt Revolver
Description Magnum Research BFR chambered in .45-70 Government with a five-round cylinder and a 10" barrel. Stainless steel barrel, frame, unfluted long cylinder, single action trigger, and hammer. Smooth Bisley style grips and grip frame. Adjustable...

8
Magnum Research Desert Eagle .44 Mag Pistol
Description Magnum Research Desert Eagle chambered in .44 Remington magnum with two, eight round removable magazines and a 6" barrel. Manufactured in Israel by IWI and imported by Magnum Research. Brushed stainless steel frame with pebble textured ru...

9
IMI Magnum Research Desert Eagle .44 Mag Pistol
Description Magnum Research Desert Eagle chambered in .44 Remington Magnum with one, eight round removable magazine and a 6" barrel. Manufactured in Israel by IMI and imported by Magnum Research. Bright nickel steel frame and controls with textured p...

10
Pardini SP Bullseye .22 LR Semi Auto Pistol
Description Pardini SP Bullseye chambered in .22 long rifle with four, five round removable magazines and a 5" barrel. Black and silver finish with textured wood grips with bullseye palm support. Paddle style magazine release and fully adjustable tri...

11
Wilson Combat Classic 10mm Semi Auto Pistol
Description Wilson Combat Classic in 10mm with four, nine round removable magazines and a 5" barrel. Cocobolo wood Starburst grip plates. Armor-Tuff finished frame, serrated skeletonized trigger, hammer and serrated slide. Backstrap safety. Lower lef...

12
STI Perfect 10 10mm Semi Auto 2011
Description STI International Perfect 10 chambered in 10mm Auto with three, fourteen round removable magazines and a 6" barrel. Fully textured polymer grip frame with flared magazine well. Steel frame with full length under barrel accessories rail. A...

13
Ruger Old Model Blackhawk 3-Screw .357 Revolver
Description Ruger Old Model Blackhawk chambered in .357 Magnum with a six-shot cylinder and a 6.5" barrel. Manufactured in 1963 with serial number 47877. Blued barrel, flat top 3-screw frame, fluted cylinder, single action trigger, and hammer. Smooth...

14
Ruger NM Blackhawk .357 Maximum SA Revolver
Description Ruger New Model Blackhawk in .357 Maximum with a six round capacity and a 7.5" barrel. Smooth wood grip plates. Blued trigger guard, serrated trigger, hammer, frame, cylinder and barrel. Right ide of frame loading gate. Under barrel cylin...

15
3 Digit Ruger Hawkeye .256WM Single Shot Pistol
Description Ruger Hawkeye chambered in .256 Winchester Magnum with a single shot capacity and a 8.5" barrel. Manufactured in 1963 with a three digit serial of 251. Blued barrel, frame, and swing out breech block. Blued/stainless single action trigger...

16
Ruger Old Model Blackhawk Convertible .45 Colt/ACP
Description Ruger Pre-Warning 3 Screw Old Model Blackhawk Convertible chambered in .45 with two six-shot cylinder for .45 Colt and .45 ACP, and with a 7.5" barrel. Manufactured in only two years between 1971 and 1972 with serial number 45-02446. Blue...

17
Sig Sauer P226-S X-Series .40S&W Semi Auto Pistol
Description Sig Sauer P226-S X-Series chambered in .40 S&W with two, twelve round removable magazines and a 5" barrel. Sig Sauer INC Exeter NH. Stainless steel frame with checkered wood Hogue grips, flared magazine well, and enlarged magazine release...

18
Sig Sauer P220 Super Match .45 ACP SAO Pistol
Description Sig Sauer Custom Shop P220 Super Match chambered in .45 ACP with two, eight round removable magazines and a 5" barrel. Black finished alloy frame with checkered wood Sig grips and under barrel accessories rail. Single action trigger and h...

19
Walther PP West German .32 ACP Semi Auto Pistol
Description Walther PP in 7.65mm (.32 ACP) with two, seven round removable magazines and a 3.75" barrel. West German Police marked. Checkered composite grip plates. Blued frame, trigger guard, trigger, hammer and serrated slide. Left side of frame ch...

20
Walther PP West German .32 Semi Auto Pistol
Description Walther PP in 7.65mm (.32 ACP) with two, seven round removable magazines and a 3.75" barrel. West German Police marked. Checkered composite grip plates. Blued frame, trigger guard, trigger, hammer and serrated slide. Left side of frame ch...

21
Dan Wesson 445 Super Mag .445
Description Dan Wesson 445 Super Magnum in .445 CTG with a six round capacity and a 8" barrel. IHMSA member owned firearm with the serial number being the persons member number. These were ordered directly from Dan Wesson. Dimpled rubber Hogue Monogr...

22
Dan Wesson / NYIC 445 Super Mag 73 Rds
Description This lot is for four boxes of Dan Wesson 445 Super Mag 300 grain jacketed hollow point ammunition. Three of the boxes are complete with all twenty rounds of ammunition and one box is partial with thirteen out of twenty round of ammunition...

23
Sphinx SDP Compact 9mm Semi Auto Pistol
Description Sphinx SDP Compact chambered in 9mm with two, fifteen round removable magazines and a 3.7" black nitride barrel. FDE finished hard coat anodized aluminum frame with high cut beavertail, interchangeable grip inserts, beveled magazine well,...

24
TC Steve Herrett Contender .30 Herrett Pistol
Description Thompson Center Contender Steve Herrett Commemorative in .30 Herrett with a single round capacity and a 10" Bull barrel. One of five hundred made. Contoured wood grip. Blued engraved trigger guard, serrated trigger, frame, hammer and bar...

25
Uberti American Buntline .44 Mag Revolver
Description Uberti American Buntline chambered in .44 Remington Magnum with a six-shot cylinder and a 18" barrel. Manufactured in Italy by Uberti and imported by Uberti America, marked on the barrel. Blued barrel, fluted cylinder, trigger, and grip f...

26
Uberti/Navy Arms 1860 Henry .44-40 Lever Action
Description Uberti 1860 Henry chambered in .44-40 Winchester with a thirteen round capacity and a 24 1/4" barrel. Manufactured in Italy in 2001 by Uberti with a BP date code, and imported by Navy Arms, marked on the top of the barrel. Blued barrel, m...

27
Winchester M-1898 10Ga Signal Cannon
Description Winchester Signal Cannon Model 1898 in 10 gauge (Not For Ball) with a single round capacity and a 12" barrel. Black finished frame and finish worn blued barrel. Rear barrel breech door and trigger/firing pin. Underside has adjustment scre...

28
Furr Arms 1876 Camel 1/3 Scale .22LR Gatling Gun
Description Rare and desirable Furr Arms model 1876 Camel fully functioning 1/3 scale gatling gun chambered in .22 long rifle with one Broadwell drum feeding mechanism and ten, 7" nickel barrels. Mostly brass construction with walnut tripod legs. Ga...

29
Furr Functional James Rifle 6 Pdr Cannon 1/3 Scale
Description Most likely the work of Karl James Furr but is unsigned. 1/3 Scale James "Rifle" Field Cannon with a 22" bronze barrel and a 1 1/4" bore. The wheels are 19 3/8" diameter and the overall length is a little over 40". Constructed out of bras...

30
Antique 3-Digit S&W NM NO.3 Target .32-44 Revolver
Description Smith & Wesson New Model Number Three Target chambered in .32-44 S&W with a six-shot cylinder and a 6.5" barrel. Nickel finished barrel, frame, cylinder, single action hammer, and trigger. Brass plated side plate, trigger guard, and rear ...

31
S&W 27-3 50th Anniversary .357 Mag Revolver
Description Smith & Wesson Model 27-3 50th Anniversary 1935-1985 (The First Magnum April 8th 1935) in .357 Magnum with a six round capacity and a 5" barrel. Smooth wood grip plates. Blued frame, cylinder and barrel. Three T's. Case colored serrated T...

32
S&W 28-2 Highway Patrolman .357 Mag Revolver
Description Smith & Wesson model 28-2 Highway Patrolman chambered in .357 Magnum with a six-shot cylinder and a 6" barrel. Manufactured between 1978 and 1980 with serial number N588745. Satin blued barrel, frame, and fluted cylinder. Case colored tri...

33
S&W 29-3 Elmer Keith .44 Mag Revolver
Description Smith & Wesson Model 29-3 Elmer Keith 1899-1984 Commemorative in .44 Magnum with a six round capacity and a 4" barrel. Smooth wood grip plates. Blued frame, cylinder and barrel. Case colored serrated Target trigger and checkered Target ha...

34
Cased Smith & Wesson 27-2 .357 Magnum Revolver
Description Smith & Wesson 27-2 chambered in .357 Magnum with a six-shot cylinder and a 8 3/8" barrel. Manufactured between 1977 and 1978 with serial number N476853. Blued barrel, frame, fluted cylinder, and checkered cylinder release. Three T's with...

35
S&W 544 Texas Wagon Train .44-40 Revolver
Description Smith & Wesson model 544 Texas Wagon Train Commemorative chambered in .44-40 Winchester with a six-shot cylinder and a 5" barrel. Manufactured in 1986 with serial number TWT2096, one of 4,782 produced. Blued barrel, frame, and fluted cyli...

36
S&W 60 .38 S&W Spl Engraved Signed Revolver
Description Smith & Wesson Model 60 in .38 Smith & Wesson Special with a five round capacity and a 2" barrel. Aftermarket engraved by retired Winchester Master Engraver Jasper Salerno. His signature is behind the right grip plate on the frame. His in...

37
S&W 627-PC .357 Mag Performance Center Revolver
Description UPDATE: Eight round cylinder capacity. Smith & Wesson 627-PC chambered in .357 Magnum with a six-shot cylinder and a 5" barrel. Stainless steel frame, double action trigger, hammer, cylinder release, and barrel with polished flats. Polish...

38
S&W 629-4 Performance Center Hunter .44 Revolver
Description Smith & Wesson model 629-4 Performance Center hunter chambered in .44 Remington Magnum with a six-shot cylinder and a 6.5" barrel with a removable muzzle break and top optics rail. Stainless steel barrel, frame, unfluted cylinder, checker...

39
S&W No1 2nd Issue .22 RF Short Revolver
Description Smith & Wesson Model Number one, second issue in .22 Rimfire Short with a seven round capacity and a 3.25" octagon barrel. Mother of pearl grip plates. Nickel finished frame, solid trigger and barrel. Blued checkered hammer and cylinder. ...

40
S&W Pre Model 14 K-38 Masterpiece .38 Spl Revolver
Description Smith & Wesson Pre Model 14 K-38 Masterpiece chambered in .38 special with a six-shot cylinder and a 6" barrel with narrow rib. Manufactured in 1952 with serial number K140955. Blued barrel, five screw frame, fluted cylinder, and checkere...

41
S&W Pre Model 17 K-22 Masterpiece .22LR Revolver
Description Smith & Wesson Pre Model 17 K-22 Masterpiece chambered in .22 long rifle with a six-shot cylinder and a 6" barrel with narrow rib. Manufactured in 1952 with serial number K148205. Blued barrel, five screw frame, fluted cylinder, and check...

42
Smith & Wesson .500 Magnum Revolver
Description Smith & Wesson 500 chambered in .500 S&W Magnum with a five-shot cylinder and a 9" barrel with installed compensator. Stainless steel barrel, frame, fluted cylinder, and cylinder release. Case colored trigger and hammer. Pebble textured r...

43
Smith & Wesson .500 Magnum Revolver
Description Smith & Wesson 500 chambered in .500 S&W Magnum with a five-shot cylinder and a 8.375" barrel with installed compensator. Stainless barrel, frame, fluted cylinder, and controls. Black textured rubber S&W grips with finger grooves. S&W int...

44
Smith & Wesson 3 Schofield .45 S&W Revolver
Description Smith & Wesson Performance Center 1875 Model 3 Schofield in .45 Smith & Wesson with a six round capacity and a 7" barrel. Smooth premium wood grip plates. Blued frame, cylinder and barrel. Case colored trigger guard, trigger and hammer. F...

45
Colt Model 1878 12 Ga SxS Hammer Gun
Description Colt's PT. F.A. Mfg. Co. 12 gauge hammer gun chambered for 2-3/4" shells. This example dating to 1882 features 30" Damascus barrels choked MOD/CYL, solid concave rib with single bead, knurled hammers and release lever, double triggers, "C...

46
Engraved Colt Patterson 3rd Gen .36Cal Revolver
Description Limited Colt/Patent Firearms Co. Black Powder Series Patterson 3rd Gen chambered in .36 caliber with a six-shot cylinder and a 7.5" octagonal barrel. Number 037 with glossy blue finish and smooth wood grips. Hand engraved scrollwork and p...

47
Colt Sig Series 1861 Navy Gen. Custer .36 Cal
Description Colt Signature Series 1861 Navy General Custer chambered in .36 Caliber with a six-shot cylinder and a 7.5" barrel. Blued finish with hand engraved by Colt barrel, rod, cylinder, frame, hammer, and backstrap. Rosewood grips with checkere...

48
John Adams Sr. Engraved Colt 1903/08 .380 Pistol
Description Colt 1903/08 chambered in .380 ACP with one, seven round engraved removable magazine and a 3.75" barrel. Manufactured in 1922 with serial number 55694. Full nickel finish with C coverage (3/4) Master Class engraving by John Adams Sr. Smoo...

49
Colt Camp Perry Model .22 Target Pistol
Description Rare and desirable Colt Camp Perry model target pistol chambered in .22 LR. With serial number 2159 and dating to 1935 this single action only 2nd pattern model based upon a colt officers model frame and which is only one of about 2500 ev...

50
Colt Double Diamond Python/Officers 1911 Set
Description Colt 150th Anniversary Double Diamond matched set, manufactured in 1989 with serial numbers DD0339 and 0339DD, making this number 339 of only 1000 sets made. Included in the set is a Colt Python chambered in .357 Magnum with a 6" vented r...

51
Colt BOA .357 Mag Revolver W/Box 1 of 1200
Description Colt BOA chambered in .357 Magnum with a six-shot cylinder and a 6" vented rib barrel. Manufactured in the only year of production, 1985, as a limited run with serial number BOA1196. Making this revolver 1 of only 1200 total Colt BOA's pr...

52
Colt Python .357 Mag 8" Nickel Revolver
Description Colt Python chambered in .357 Magnum with a six-shot cylinder and a 8" vented rib barrel. Manufactured in 1981 with serial number K69140. Nickel finished barrel, frame, fluted cylinder, cylinder release, textured double action trigger, an...

53
Colt Python Custom Shop Engraved .357 Revolver
Description Colt Python Custom Shop Model D chambered in .357 Magnum with a six-shot cylinder and a 4.25" vented rib barrel. Stainless steel finish with Armory Style B+ Coverage Cut Engraving. Checkered wood grips with silver Rampant Colt medallions...

54
Colt Python Engraved Employee Edition .357 Mag
Description Colt Python 2020 Employee Edition chambered in .357 Magnum with a six-shot cylinder and a 6" vented rib barrel. Stainless steel finish with Class B, 3D Laser engraving done by Altamont Company. The engraving pattern was designed by John P...

55
Colt Python Hunter .357 Mag Revolver W/Case
Description Colt Python Hunter chambered in .357 Magnum with a six-shot cylinder and a 8" vented rib barrel with slots for mounting the included Leupold M8-2X scope with Colt/Leupold medallion. Manufactured only between 1980 and 1981 with serial numb...

56
Colt Real Tree Anaconda .44 Mag Revolver
Description Limited and desirable Colt Real Tree Anaconda chambered in .44 Remington Magnum with a six-shot cylinder and a 8" vented rib barrel. Manufactured in 1995 with serial number MM82160. Real Tree camo finished barrel, frame, fluted cylinder, ...

57
1977 Colt Python .357 Mag Revolver 2.5" BBL
Description Colt Python chambered in .357 magnum with a six-shot cylinder and a 2.5" vented rib barrel. Manufactured in 1977 with serial number 67070E. Blued barrel, frame, fluted cylinder, textured double action trigger, and hammer. Checkered wood g...

58
1970 Colt SAA 2nd Generation .45 Colt Revolver
Description Colt Single Action Army 2nd Generation chambered in .45 Colt with a six-shot cylinder and a 7.5" barrel. Manufactured in 1970 with serial number 58122SA. Nickel finished barrel, frame, fluted, cylinder, single action trigger, hammer, scre...

59
Colt Custom Shop SAA .38-40 Revolver
Description Colt Single Action Army in .38-40 with a six round capacity and a 4.75" barrel. Smooth wood grip plates. Nickel finished trigger guard, trigger, frame, cylinder, hammer and barrel. Right side of frame loading gate. Under barrel cylinder r...

60
Colt Custom Shop SAA .44-40 Win Revolver W/Letter
Description Colt Custom Shop Single Action Army CP Design chambered in .44-40 Winchester with a six-shot cylinder and a 3.5" barrel. Shipped July 19th 1994 with serial number S07338A in custom shop order #4417-B. Features a blued barrel, fluted cylin...

61
Colt Custom Shop SAA .45 LC Revolver
Description Colt Custom Shot Single Action Army Late Third Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. White natural IVO grip plates. Gold finished trigger guard, trigger, frame, hammer, cylinder and barrel. Cold ...

62
Colt Custom Shop SAA .45 LC Revolver
Description Colt Single Action Army Late Third Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. Natural horn grip plates. Blued trigger guard, trigger, hammer, cylinder and barrel. Case colored frame. Right side of fra...

63
Colt Custom Shop SAA .45 LC Revolver
Description Colt Custom Shop Single Action Army Late Third Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. White natural grip plates. Blued trigger, cylinder, hammer and barrel. Case colored frame. Right side loading ...

64
Colt Custom Shop Single Action Army .38-40
Description Colt SAA Late Third/Fourth Generation in .38-40 with a six round capacity and a 4.75" barrel. Smooth wood grip plates. Blued trigger guard, trigger, cylinder, hammer and barrel. Case colored frame. Right side of frame loading gate. Under ...

65
Colt SAA .45 LC Revolver
Description Colt Single Action Army 3rd Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. Stag horn grip plates. Polished Nickel finished trigger guard, frame, trigger, cylinder, hammer and barrel. Right side of frame l...

66
Colt Single Action Army .44 Spl Revolver
Description UPDATE: Revolver is in .44 SPECIAL. Colt SAA in .45 Colt (Long Colt) with a six round capacity and a 5.5" barrel. Checkered composite grip plates. Blued trigger guard, trigger, cylinder, hammer and barrel. Case colored frame/ Right side o...

67
Colt Custom Shop SAA .45 LC Revolver
Description Colt Custom Shop Single Action Army in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. Mother of Pearl grip plates. Gold finished trigger guard, trigger, frame, hammer, cylinder and barrel. Cold blued screws and extract...

68
Colt Buntline Special SAA 3rd Gen .45 Colt
Description Colt Buntline Special Model SAA 3rd Generation chambered in .45 Long Colt with a six-shot cylinder and a 12" barrel. Serial number SA44444 with nickel plated barrel, frame, fluted cylinder, single action trigger, and hammer. Smooth wood g...

69
Colt 1878 Frontier Six Shooter .44-40 DA Revolver
Description Colt 1878 Frontier Six Shooter in .44-40 with a six round capacity and a 7.5" barrel. Checkered composite grip plates. Blued frame, trigger guard, trigger, hammer, cylinder and barrel. Bottom of grip located lanyard loop. Right side of fr...

70
1992 Colt Custom Shop SAA .45LC Revolver
Description Colt Custom Shop Single Action Army chambered in .45 Long Colt with a six-shot cylinder and a 4 3/4" barrel. Manufactured in 1992 with serial number SA96603. Blued barrel, fluted cylinder, trigger guard, single action trigger, and grip fr...

71
Colt 1911 Gov Model .45/.38 Super Semi Auto Pistol
Description Colt 1911 Government Model in .45 ACP with three, seven round removable magazines and a 5" barrel. Checkered wood grip plates. Blued frame, checkered solid trigger, checkered hammer and serrated slide. Backstrap safety. Lower left side of...

72
1961 Colt Pre Gold Cup National Match .45 ACP 1911
Description UPDATE: This is a 1961 National Match, Colt did not inscribe "Gold Cup" prior to 1970, hence a "Pre-Gold Cup" National Match...Colt Gold Cup National Match chambered in .45 ACP with one, seven round removable magazine and a 5" NM barrel. ...

73
Colt Gold Cup Trophy .45 ACP 1911
Description Colt Gold Cup Trophy chambered in .45 ACP with two, eight round removable Colt magazines and a 5" NM barrel. Manufactured in 2011 with serial number GCT29410. Stainless steel frame with checkered rubber wrap around grips with silver Colt ...

74
Colt MK IV Govt Series 70 .45 ACP Semi Auto Pistol
Description Colt Government Model MK/IV 1911 Series 70 in .45 ACP with one, seven round removable magazine and a 5" barrel. Checkered Colt/Pachmayr rubber grip. Satin Nickel finished frame, hammer and slide. Blued solid serrated trigger, safety, slid...

75
Colt MK IV Govt Series 70 .45 ACP Semi Auto Pistol
Description Colt MK/IV Government Model Series 70 in .45 ACP with one, seven round removable magazine and a 5" barrel. Checkered wood grip plates. Blued frame, serrated trigger and serrated slide. Solid serrated trigger. Backstrap safety. Lower left ...

76
Colt MKIV Series 70 Gold Cup NM .45 1911
Description Colt MKIV Series '70 Gold Cup National Match chambered in .45 ACP with one, seven round Colt magazine and a 5" National Match barrel. Manufactured in 1980 with serial number 70N84083. Blued steel frame with checkered wood grips with Gold ...

77
Colt Super 38 .38 Super Semi Auto Pistol
Description Colt Super 38 in .38 Super with one, nine round removable magazine and a 5" barrel. Very Low serial number: 759. Checkered wood grip plates. Blued frame, checkered solid trigger, checkered hammer and serrated slide. Backstrap safety. Left...

78
Colt US Army 1911 .45ACP Semi Auto Pistol
Description Colt Model 1911 produced in 1918 with a "heart cut" frame and "double diamond" wooden grips. "UNITED STATES PROPERTY" marked frame, "G" stamped behind reset pin, with rounded spring guide, "S17" mark above magazine release, "P"/"H" marked...

79
U.S. Navy Contract Colt Model 1911 Semi Auto
Description U.S. Navy contract Colt model 1911 semi auto pistol chambered in .45 ACP . This example with serial number 3330 and dating between 1912 and 1918 is marked with the two-line, two-block Colt address and patent dates with the Rampant Colt be...

80
Barrett M99A1 .50 BMG Single Shot Rifle
Description Barrett Model 99A1 chambered in .50 Browning Machine Gun with a single shot capacity and a 29" fluted match grade barrel with a three port muzzle break. One piece coated aluminum receiver with full length top picatinny rail. The rail is m...

81
HK 91 .308 Semi Auto Rifle
Description Heckler & Koch model 91 roller delayed blowback rifle chambered in 7.62x51mm (.308 Winchester) with one, five round removable magazine, three, twenty round removable magazines, and a 18" barrel with a flash hider. Manufactured Germany in ...

82
HK 93 5.56 NATO Semi Auto Rifle
Description Heckler & Koch model 93 roller delayed blowback rifle chambered in 5.56x45mm NATO with one, five round removable magazine, two twenty-five removable magazines, and a 16" barrel with a flash hider. Manufactured Germany in 1981 with a IB da...

83
LWRCI M6IC DI Oscar Foxtrot 5.56 Other Firearm
Description LWRC International M6IC DI Oscar Foxtrot chambered in 5.56 with one, ten round removable magazine and a 13" 1-7 twist cold hammer forged NiCorr heavy barrel with a Surefire war comp three prong flash hider. LWRCI 12" handguard with full l...

84
Omega Gideon Shadow UMP Clone 9mm Pistol
Description Omega Gideon Shadow chambered in 9mm with one, fifteen round removable magazine and a 8" barrel with a tri lug muzzle. The H&K UMP is a widely sought after firearm with authentic Heckler & Koch UMP's never being imported for the civilian ...

85
Tommy Built Tactical TMP .45 ACP Semi Auto Other
Description Tommy Built Tactical TMP chambered in .45 ACP with one, ten round windowed magazine and a 12.5" threaded barrel with a HDPS Corp flash hider. Polymer upper receiver with three front HDPS picatinny rail sections with vertical grip. Full le...

86
MK Gun Mods Semi Auto Argentine FMK-3 9mm
Description MK Gun Mods was established as a firearms manufacturer in 2008 and specialized in semi-automatic versions of military firearms for collectors and reenactors. This FMK-3 chambered in 9mm is an example built by MK Gun Mods from an Argentine...

87
NOS Pre94 Thompson 1927 A3 .22 Semi Auto
Description New Old Stock and Pre Ban Auto Ordnance Corp of West Hurley manufactured Thompson model 1927 A3 chambered in .22LR. This example features a 16" finned barrel with Thompson marked Cutts type compensator, hardwood pistol foregrip, adjustabl...

88
Auto Ordnance Thompson Korean War .45 ACP
Description Auto Ordnance Thompson 1928 Korean War Commemorative issued by The American Historical Foundation, chambered in .45 ACP with one, twenty round removable magazine and a 16.5" barrel. Number 1166 of only 1500 made with serial number KW1166....

89
Auto Ordnance Thompson 1927A1 .45 ACP Rifle
Description West Hurley Auto Ordnance Thompson 1927 A1 "Tommy Gun" chambered in .45 ACP with one, ten round drum magazine and a 16.5" barrel with a muzzle break. Blued barrel upper receiver, lower, and controls. Top charging handle and left side padd...

90
Auto Ordnance Thompson 1927 A1 .45 ACP Rifle
Description Auto Ordnance Thompson 1927 A1 (Tommy Gun) chambered in .45 ACP with two, thirty round stick magazines and a 16.5" barrel with a muzzle break. Blued barrel upper receiver, lower, and controls. Top charging handle and left side paddle styl...

91
Colt / Ohio Ordnance 1928 .30-06 Belt Fed
Description Original Colt kit remanufactured by Ohio Ordnance Works model 1928 Water Cooled belt fed semi auto firearm chambered in .30-06 Springfield with a 24" barrel including the muzzle device and brass capped water cooling jacket. Manufactured b...

92
US Browning 1919A6 Belt Fed Semi Auto .308
Description Browning model 1919 belt fed semi auto chambered in .308. Unknown manufacturer and marked "1919A5" this example built on an Israeli 1919 parts kit has been assembled in the A6 configuration with bipod, carry handle and rear shoulder stock...

93
Transferable Smith & Wesson 76 9mm Sub Machinegun
Description Transferrable Smith & Wesson model 76 Select Fire sub machinegun chambered in 9mm with a 8" barrel, with mounted barrel shroud. Blow back operated open bolt machinegun with a ambidextrious three position selector with full auto, semi auto...

94
Transferable Ruger AC-556 Machine Gun .223
Description Transferrable Ruger model AC-556 full auto machine gun chambered in .223. The AC-556 is a Mini-14 rifle configured selective fire and was marketed to military and law enforcement. This example features an 13" barrel with a birdcage flash ...

95
Cobray / MAC M10A1 9mm/.45 ACP Machine Gun
Description Cobray/MAC, Military Armament Corporation Ingram M10A1 in 9mm or .45 ACP with eight, thirty two round and six, .45 caliber thirty round removable magazines and a 6" threaded barrel. Blued aftermarket MPA Defender marked fold out wire stoc...

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Premier Firearms Auction - Spring 2024

Connecticut Firearms Auction

Connecticut Firearms Auction


Contact:
Phone:
Sale Location
8 Metals Drive
Plantsville, CT 06479
Sale Dates and Times
Saturday Apr 27, 2024 Completed
Sale Terms and Conditions
Connecticut Firearms Auction Terms of Sale All bidders are required to read the Terms and Conditions of the Sale before bidding with Connecticut Firearms Auction LLC and/ or CT Firearms Auction collectively referred to below as �CTFA�. Those who bid are bound by these Terms and Conditions of the Sale, as amended by any oral announcement, published or posted notices, which together form the contract of the sale between the successful bidder �buyer�, �CTFA� and seller �consignor� of the lot. ACCEPTANCE OF TERMS: When bidding on any lot offered by CTFA, the bidder indicates acceptance of the following Terms of Sale. Any participation in the auction binds the bidder to agreement of these terms whether or not buyer has read or understood said terms. The terms in writing contained herein are subject to change without notice and bidder agrees that the most recently published Terms of Sale as published or amended on the website at the beginning of the auction shall apply. BIDDER ELIGIBILITY AND REGISTRATION: Buyers warrant that they are at least age 18 and possess a valid photo ID. Buyers are required to provide a verifiable address of residence, phone number, and email in writing at least 48 hours prior to auction date. Long guns will only be sold to persons 18 years of age, or older. Handguns will only be sold to those persons 21 years of age or older. It is the bidder�s responsibility to take buyers premium, shipping, and insurance costs into consideration when bidding on items. It is the buyers responsibility to personally inspect auction items, or request condition reports and detailed questions prior to bidding. TITLE: Title to all merchandise shall pass to the highest bidder at the fall of the auctioneer�s hammer. The buyer will then assume all risk and full responsibility of the lot purchased once ownership has changed. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. BUYER�S PREMIUM: A buyers premium will be added to all successful bids and is payable by the buyer as part of the total purchase cost. Base buyers premium (phone, live in-person and in-house absentee) of 18% applies to phone and direct absentee bidding.This is the lowest buyers premium offered, and all bids must be submitted at least 24 hours prior to auction time. A 3% discount is offered for cash, check, wire, and money order payments. Buyers premium for bidding through all online platforms (including www.ctfirearmsauction.com) is 21 % with a 3% discount for cash equivalent. A 3% Discount applies for Cash or Check Equivalent. Split payment methods (cash/credit) lose 3% discount. Buyers premium is non-negotiable. Split payment methods (cash/credit) lose 3% discount. LIMITED GUARANTEE: CTFA makes every effort to accurately describe all items offered in its sales. The descriptions and condition reports carry a limited guarantee. It is a guarantee to protect the buyer against errors in descriptive fact and major discrepancies that would have a significant effect upon the value of the item. This limited guarantee covers the following: DESCRIPTIVE FACTS: Manufacturer, model, caliber, serial numbers, barrel length, special features, major restoration, modification, counterfeits, reproductions or major fabrications not disclosed in the description. CONDITION DISCREPANCIES: It is the bidder�s responsibility (present, online, or absentee bidders) to determine by inspection by themselves (or a hired professional) the exact condition of each item prior to bidding on the item. CTFA makes every effort to follow the commonly accepted and current condition guidelines for modern and antique firearms such as the NRA Modern and Antique grading system, Blue Book percentage of finish rating, and Standard Catalog of Firearms Modern grading. It is important to note that these systems have changed over the years, and present different opinions based on the edition and authors. Condition reports are the opinion of CTFA and represent the observations of the cataloger. BIDDERS RESPONSIBILITIES: It is the bidder�s responsibility to initiate contact with CTFA in request for additional information regarding the items. Submit all questions regarding upcoming auction items at least 48 hours prior to the date of auction. CTFA will make every effort to answer all submitted questions in a timely manner. In-Person Bidders must examine all items prior to purchase and again upon receipt. Any discrepancies must be noted prior to leaving the facility. If bidding via absentee or online, then it is the bidders responsibility to examine the lot immediately upon receipt. If a major discrepancy should be discovered, it is the buyers responsibility to contact us immediately. The limited guarantee is null and void 28 days after the auction date (NOT THE DATE OF RECEIPT). If a buyer pays late and receives items late, through action or inaction on their part, the buyer is disqualified from any guarantee. Under no circumstances will CTFA be responsible for lost profits or other financial damages. If it is agreed that an item may be returned, it is the buyer's responsibility to return it in the same state and condition as received. Returned items that are modified, damaged by buyer, or mishandled void all guarantees. LIMITATIONS: The limited guarantee covers major discrepancies in condition reports, such as error in fact, visible repairs or restorations, or major differences in percent of finish or bore(+/- 20%). This limited guarantee is only available to the buyer of record. Please refer to POST SALE RETURN POLICY. Except as stated in the limited guarantee above, CTFA will not be held responsible for typographical errors or errors of omission. This limited guarantee does NOT cover imperfections, patina, slight damages, handling marks, natural imperfections, undisclosed minor blemishes, finish differences, wood-to-metal fit issues, surface cracks or chips in wood, dings and dents, unverifiable age, and other similar differences that are inherent in the firearms or other antiques and collectibles offered for sale. Firearm internal mechanisms and moving parts are not inspected, and guns are not test fired unless otherwise noted. If mechanical or other working parts are inoperable, even if working at the time of sale, CTFA is not liable due to the inherent nature of the age of these used items. CTFA will not be responsible for shipping costs, after auction appraisal fees, testing or any other post auction costs. This limited guarantee DOES NOT APPLY to any ammunition whatsoever. All Ammunition will be sold �as-is� (see below) AS-IS: Auction lots and items offered with the designation �AS-IS�, �Poor condition�,or �For parts or restoration� are offered without guarantee, all sales are final and sold without refund or buyer recourse. POST SALE RETURN AND REFUND POLICY: If a major description or condition discrepancy is discovered within 28 calendar days of the auction, a buyer may submit a request in writing for a full refund under the following conditions: The request for refund must be received in writing before the end of the 28th day. The auction lot in question must be received by CTFA within 3 days of the request for return and refund. After receipt of the lot in question, CTFA will perform an evaluation, and determine the validity of the request. If a return and refund is granted, CTFA will notify the buyer within 7 calendar days of receipt. CTFA does not offer adjustments or partial refunds. Refunds are only given for the total hammer price, and restocking fees up to the total amount of buyers premium may apply. Accepted refunds are paid only by paper check, and submitted to the buyer 30 days after receipt of items. FIREARMS TRANSFER AND ELIGIBILITY: All firearm transfers will be in strict accordance with all International, Federal, State and local laws. Buyer is responsible for adhering to all country, state and local laws before bidding. If a bidder is unable to import, purchase, own, or receive a firearm for any reason, they should not bid on these items. If a buyer later determines they cannot legally own a firearm or accept delivery, the bid is still a valid contract, and the buyer is still obligated to remit payment in accordance with payment terms. CTFA does not offer returns, refunds or cancellations on the basis of ineligibility or failure to facilitate transfer. BUYER OF RECORD: All firearms must transfer to the registered buyer on record. CTFA will not modify, or re-invoice any firearms for another party. DENIAL OF TRANSFER: If �Denied� by FBI / NICS background check buyers will not be able to take possession of the firearm and the firearm will be consigned to the next available firearm auction. Dealers and Individuals that bid on and win items own the items and are fully responsible for payment within terms regardless of whether the FBI / NICS approves their taking physical possession of the items. CTFA will not cancel the sale due to disapproval for any reason. If a buyer is appealing a �Denied� decision, we will hold the firearm for a grace period of 30 days, with monthly storage fees in effect on the 31st day. IN-PERSON PAYMENT AND PICKUP: Only the person to whom the bidder number is registered may accept transfer of the firearm(s) at the conclusion of the sale � Federal Law disallows anyone else from accepting the transfer. Buyers may not bid on or pay for modern firearms on behalf of another party. Modern Firearms (1898 and later) Can be picked up in person with a valid CT Pistol Permit or applicable Certificate Can be picked up by FFL Licensee or listed responsible person with �Live Copy� of License Eligible Curio & Relic Firearms can be picked by by C&R Holders with �Live Copy� of license. Non Connecticut Residents (without FFL or C&R) may not pick up modern or NFA firearms in person at our CT Facility. Antique Firearms Can be picked up in person with valid photo ID by persons over the age of 18. No background check required, all states of residence eligible. Non-Guns may be picked up by any eligible buyer (or buyers agent) with a valid photo ID. Ammunition: Any buyer receiving ammunition in the State of CT must possess a Valid CT Pistol Permit, Long Gun Certificate, or Ammunition Certificate per state laws. SHIPPING: Shipping and transportation costs are the responsibility of the buyer. Unless otherwise noted, all items shipped in-house, and will be billed on your invoice. Modern firearms are legally required to be shipped to a BATF licensed FFL business within their state of residence for transfer. For states that allow shipment of C&R firearms to the C&R license holder, CTFA reserves the right to ship those C&R firearms to the address listed on C&R license. Modern handguns only ship via UPS 2-Day Air or U.S.P.S. Priority Mail. Modern long guns are shipped via UPS ground. IT IS THE BUYERS RESPONSIBILITY TO CONTACT THEIR RECEIVING FFL AND ARRANGE TRANSFER AND FFL REMITTANCE. The receiving dealer must submit a current copy of their FFL for each auction invoice. FFL�s are not kept on file. FFL�s should be submitted to sales@ctfirearmsauction.com or through our website here: https://ctfirearmsauction.com/submit-your-ffl/ FEES: Standard Hand Guns ship for $40. Standard long guns ship for $55. Oversize shipping charges will apply to guns over 45� Overall Length. Additional fees apply for shipping addresses outside the Continental United States. DISASSEMBLY: Firearms, auction items, and accessories may be disassembled for shipping. This may include scopes, cases, barrels, and stocks. ADDRESS: CTFA is not responsible for incorrect shipping addresses. Buyers must verify the shipping address listed on their invoice prior to shipment. Standard items packed internally by CTFA will ship approximately one to fourteen business days after payment AND applicable paperwork (FFL) is received. INSURANCE: All firearms in transit are insured at no additional cost up to $2,500 per shipment. Packages valued over $2,500 require insurance at a rate of 1% per invoiced dollar unless the buyer declines in writing 48 hours prior to package shipment. OVERSIZE: Certain auction items exceed standard shipping fees and may require oversized and heavy shipping surcharges. Every effort is made to note these charges prior to catalog publication, but may be included on a buyers invoice post auction without notice. AMMUNITION: Ammunition does not ship with an associated gun. Separate charges apply for ammunition shipments, and may require heavy or oversize charges. INTERNATIONAL: CTFA welcomes international buyers. CTFA can provide, upon request, recommended firearms exporters and international shippers. It shall be the potential buyer�s sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property and for paying all shipping costs, customs and duties on the items. By law, CTFA cannot, and will not, declare lesser values for any international purchases and all shipments will include the invoice with purchase totals including the buyer�s premium and shipping cost. CTFA does not offer in-house international shipping (or export) any firearms, ammunition, or weapons REGARDLESS OF AGE OR STATUS OF THE LOT. All international shipping must be performed by a licensed exporter or third party shipper. CTFA does offer domestic shipping to the exporter of the buyer's choice. Buyer is responsible for contacting and employing the exporter. Exporter FFL documents must be sent to sales@ctfirearmsauction.com prior to domestic shipment. CTFA strongly recommends making contact with an exporter prior to bidding for pricing, process and timeline information. GOODS MADE FROM OR CONTAINING MATERIALS FROM PROTECTED SPECIES: CTFA does not accept any responsibility or liability for the sale of items containing materials from protected species or for any omission in marking or labeling goods as containing materials from protected species. Such material includes, but is not limited to, ivory from elephants and walruses, tortoise shell, crocodile skin, whalebone, rhinoceros horn, some species of coral and certain woods. Restrictions on the importation, exportation, sale, transfer, and/or possession of goods containing materials from protected species derive from international, federal, and state laws and regulations promulgated thereunder. Laws include, but are not limited to, the Convention on International Trade in Endangered Species of Flora and Fauna (CITES), the Endangered Species Act (ESA) and the Marine Mammals Protection Act (MMPA). States currently restricting trade of protected species include, but are not limited to, California, New York and New Jersey. Prospective buyers are on notice that several countries completely prohibit importation of property made, all or in part, of protected materials. Some countries require special permits, such as a CITES permit, from the relevant regulating authority in the countries of exportation and importation as well. Potential buyers intending to import the property into another country should be familiar with the relevant customs laws and regulations prior to bidding on goods containing material from protected species. Regulations may vary as the U.S. generally prohibits importation of articles containing material(s) from species it has designated endangered or threatened if the articles are less than 100 years old, subject to certain exceptions. It shall be the potential buyer�s sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property as described in the aforementioned paragraphs. All buyers agree to comply with any and all domestic and international restrictions on the trade of protected species as a condition of the sale. Please note that the ability to obtain an export license or certificate does not ensure the ability to obtain an import license or certificate in another country, and vice versa. It is the buyer�s responsibility to obtain any export or import licenses and/or certificates as well as any other required documentation. CTFA is not able to assist the buyer in attempting to obtain the appropriate licenses and/or certificates, and there is no assurance that an export license or certificate can be obtained. The inability or delay in obtaining permits, licenses or other permissions to import or export goods containing material from protected species will not constitute a basis for rescission or cancellation of the sale of said goods or the delay in payment of purchased items in accordance with these Bidder Terms and Conditions. BIDDING TERMS: The auctioneer will determine the highest bidder. The auctioneer alone has the right to reopen the bidding of an item at any time if deemed necessary due to a dispute. If there is a tie bid between the floor and Internet or absentee bid, the floor bid takes precedence. In the event of a tie internet bid, the auctioneer will choose the highest bidder. CTFA and its representatives reserve the right to remove those attendees who impede preview and/or the auction. CTFA is not responsible for any errors in bids, omissions of bids, or failure to execute bids and shall have no liability to any bidder for any technical or other failure associated with internet, absentee bidding, or telephone bidding. In the event of an on-site utilities or internet services interruption, the auction will be suspended until such a time that the utility can be restored. Consignors are not allowed to bid on their own merchandise nor have any agent bid on their behalf. If the Auctioneer recognizes such bidding, the Auctioneer reserves the right to withdraw any or all items consigned by the offending consignor. ABSENTEE BIDDING: CTFA will accept absentee bids if pre-authorized by mail, phone, email, online, or in-person. In-Person absentee bidders must use the absentee bid form and clearly mark the lot number, title and maximum bid amount. If there are two (2) identical bids placed on the same item, priority will be given to the first bid received. All bids must be left in increments as published for that particular auction. If a bid is �out of increment,� the auctioneer will automatically round the bid down to the next correct increment. Seller(s) agree to allow the Auctioneer to accept and execute absentee bids in a competitive manner for potential buyers and under the CTFA absentee bidding terms and conditions. During the live sale, the auctioneer will execute absentee bids competitively (starting with the lowest possible bid point) up to the maximum amount indicated. ONLINE BIDDING: Online bidding through www.CTfirearmsauction.com, Live Auctioneers, Invaluable, Hibid, Proxibid, or other bidding platforms may be available. These terms and conditions apply, as well as additional terms and conditions for each third-party platform. These Terms & Conditions will take deference over any posted online terms and agreements. A surcharge may be added for third party online platforms. Refer to the bidding platform of choice for the final buyer�s premium. If there is a tie bid between the internet bidding venues and the floor, the floor bid takes precedence. Due to our fast paced auctions and bids coming from floor bidders, phone bidders, Internet bidders and absentee bids, the auctioneer has the final word on all item(s) sold. The bidder assumes the risk of winning an item online and discovering the item has sold to another bidder. This is due to the final call of the auctioneer and the operator not being able to re-open that lot. Registered Online bidders are fully responsible for accidental bidding as if they bid normally. BID RESULTS: CTFA will only contact successful bidders. Invoices are sent within 24 hours of auction end. The invoice will include the lot info, hammer price, premium, shipping, insurance, and any other charges that apply. Please hold phone inquiries regarding bid success until after receiving the invoice. For verifications, CTFA cannot provide winning bid information until the second business day after the auction. CTFA will not provide bidder information to any outside sources. TELEPHONE BIDDING: Requests for phone lines must be received at least three (3) days prior to the auction date. CTFA cannot guarantee phone lines but will make every attempt to accommodate those who wish to participate live via phones. Phone lines are provided to qualified bidders at CTFA's preference. Please contact us directly to arrange phone bidding.203-710-0189. Minimum bid requirements may apply. BIDDERS PRESENT AND TAKING ITEMS DURING AND AFTER AUCTION: Since item liability transfers upon a successful bid, items paid for must be packed, transported and/or removed by the buyer at his/ her own risk after the close of the sale. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. If any employee or agent of CTFA shall pack or transport the merchandise, it is fully at the risk and responsibility and expense of the buyer. CTFA shall not be held liable for any loss or damage that may be caused by the said agent or employee. RESERVES: The majority of our items are unreserved, but occasionally items may carry a moderate reserve. Please note that when a lot carries a reserve, the reserve is at or below the low estimate. In the case of a reserved item, the seller has authorized the auctioneer to bid on their behalf until the reserve price is reached. The auctioneer will note if a buyer is bidding against the reserve. PAYMENT TERMS: CTFA accepts Visa, MasterCard, Discover, American Express, personal checks, certified checks, wire transfers, money orders, and cash. Any invoice totaling more than $50,000 must be paid within three (3) business days of the auction date. All other merchandise must be paid in full within seven (7) days of the date of the invoice.Upon payment in full, it is the bidder�s responsibility to submit any additional information necessary, including an FFL, to initiate transfer and shipping. Invoices over $5,000 may be subject to mandatory check or wire payment. All transaction fees associated with payment method are non-refundable. All goods not retrieved by buyer within 30 days after the invoice date, shall be subject to a storage fee of $50 per item per month. Buyer authorizes CTFA to sell, at their standard commission and consignment contract terms, any goods not retrieved after a 90 day period in any manner deemed appropriate by CTFA and the proceeds will be applied to any outstanding balance due from the buyer. CREDIT CARDS: Link for online credit card payment will be listed in the buyers invoice. Credit Card payments are subject to maximum buyers premium, and can be discounted by 3% if payment is received by cash, check, money order or wire transfer. Credit Card payments are only accepted from the buyers name listed on the invoice. CTFA reserves the right to refuse to ship to a different address than the billing address on the credit card being used. CTFA does not allow credit card chargebacks for any reason and any delivered firearms subject to a chargeback will be considered as a stolen gun and reported immediately to Law Enforcement. Credit cards information is not stored and payment for invoices is the buyers responsibility. We do not use third party billing services and the buyers credit card will not be automatically charged. CHECK: There will be a $40.00 service charge for returned checks. Make checks payable to: CT Firearms Auction LLC. Checks can be mailed to: CT Firearms Auction LLC 8 Metals Drive, Plantsville CT 06479. CTFA reserves the right to hold items paid for by personal or company check until said check clears (14 days). CTFA has the right to hold all checks over $2,000. Customers who have an established successful buying history with CTFA may be exempt from this requirement. First time buyers paying by check may be subject to additional requirements such as bank letter of credit. WIRE TRANSFERS: Wire transfers are accepted for invoices totalling more than $5,000 USD. Invoices below $5,000 may be subject to a $30 transaction fee. NON-PAYMENT: In the few situations where a successful bidder does not remit payment when due, CTFA will proceed with the legal steps necessary to protect its interests and will block the bidder from future auction participation. SALES TAX: CTFA is required to collect sales tax where applicable. It is the bidder�s responsibility to know the sales and use tax law in their locality and know what sales and use tax will be due upon their purchase. Lots are subject to all applicable state and local taxes, unless appropriate resale permits are on file with CTFA prior to invoicing. Bidder agrees to pay CTFA the actual amount of tax due in the event that sales tax is not properly collected due to: 1) an expired, inaccurate, or inappropriate tax certificate or declaration, 2) an incorrect interpretation of the applicable statute, 3) or any other reason. The appropriate form or certificate must be on file and verified by CTFA five days prior to Auction, or tax must be paid; only if such form or certificate is received by CTFA within 4 days after the Auction can a refund of tax paid be made. Lots from different auctions may not be aggregated for sales tax purposes. NFA TRANSFERS: National Firearms Act Weapons and Destructive Devices (DD) Processing to Dealers: Buyer must provide CTFA with a copy of their receiving dealers active FFL and their SOT. Estimated time for processing and approval of the required Form 3 can take 3 days to 3 months, dealer to dealer via E-File is usually less than a week. Individuals IN CT: Law requires a completed Form 4, or Form 5 for deactivated guns. CTFA will prepare and sign the front of the applicable transfer form, and send to the individual buyer or meet with them directly. Individuals are responsible for completing requirements for fingerprints and photo, as well as completing applicable portions of the reverse side of the form. Estimated time for processing and approval of Form 4 is 6-12+ months.Dealers and Individuals that bid on and win NFA or DD items own the items and are fully responsible for payment within terms regardless of whether the BATF approves their taking physical possession of the items. CTFA will not cancel the sale due to BATF disapproval for any reason. SAFETY: Since all firearms sold are �collectible� items, CTFA does not test the safety or warrant functionality of these firearms. All firearm purchases should be examined by a certified gunsmith prior to shooting. DENIAL OF SALE: CTFA reserves the right to deny the sale of a firearm to any buyer, for any reason, at any time in the sales process. WITHDRAWAL OF PROPERTY: CTFA reserves the right to withdraw any property from the auction at any time and shall have no liability whatsoever for such withdrawal. DEFINITIONS: CURIO & RELIC (C&R): Per BATF: To be recognized as C&R items, 478.11 specifies that firearms must fall within one of the following categories: Firearms which were manufactured at least 50 years prior to the current date, but not including replicas of such firearms; Firearms which are certified by the curator of a municipal, State, or Federal museum which exhibits firearms to be curios or relics of museum interest; and Any other firearms which derive a substantial part of their monetary value from the fact that they are novel, rare, bizarre, or because of their association with some historical figure, period, or event. Firearms automatically attain C&R status when they are 50 years old. Any firearm that is at least 50 years old, and in its original configuration, would qualify as a C&R firearm. It is not necessary for such firearms to be listed in ATF�s C&R list. ANTIQUE FIREARMS: Per BATF: The term �antique firearm� means� any firearm (including any firearm with a matchlock, flintlock, percussion cap, or similar type of ignition system) manufactured in or before 1898; or any replica of any firearm described in subparagraph (A) if such replica� is not designed or redesigned for using rimfire or conventional centerfire fixed ammunition, or uses rimfire or conventional centerfire fixed ammunition which is no longer manufactured in the United States and which is not readily available in the ordinary channels of commercial trade; or any muzzle loading rifle, muzzle loading shotgun, or muzzle loading pistol, which is designed to use black powder, or a black powder substitute, and which cannot use fixed ammunition. For purposes of this subparagraph, the term �antique firearm� shall not include any weapon which incorporates a firearm frame or receiver, any firearm which is converted into a muzzle loading weapon, or any muzzle loading weapon which can be readily converted to fire fixed ammunition by replacing the barrel, bolt, breechblock, or any combination thereof.� FFL: Federal Firearms Licensee with a current and valid license to be a firearms Dealer / Manufacturer / Importer CURIO & RELIC HOLDER: FFL type 03 or C&R license or Collector NFA (National Firearms Act of 1934) Weapons (commonly called �Class 3�): A shotgun having a barrel or barrels of less than 18 inches in length; A weapon made from a shotgun if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 18 inches in length; A rifle having a barrel or barrels of less than 16 inches in length; A weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length; Any other weapon, as defined in subsection (e); A machine gun; Any silencer (as defined in section 921 of title 18, United States Code); and A destructive device. DESTRUCTIVE DEVICES: A missile having an explosive or incendiary charge of more than 1/4 oz. Any type of weapon by whatever name known which will, or which may readily be converted to expel a projectile, by the action of an explosive or other propellant, the barrel or barrels of which have a bore greater than one-half inch in diameter. A combination of parts designed and intended for use in converting a device into a destructive device and from which a destructive device can be readily assembled. MODERN FIREARMS: Any firearm that does not already classify as a C&R, NFA Weapon or Antique and is under the purview of the Gun Control Act of 1968.
Listing Details
Our Annual Spring Premier Firearms and Military Auction. Featuring Colt, Smith & Wesson, Antiques, World War Two, NFA and Fully Transferable Machine Guns, Hunting Rifles and Fine Shotguns.

1
Browning Hi Power 9mm Semi Auto Pistol
Description Browning Hi-Power in 9mm with two, thirteen round removable magazines and a 4.75" barrel. Made in Belgium and assembled in Portugal. Smooth laminated wood grip plates. Blued frame, trigger, hammer and serrated slide. Lower left side of fr...

2
Factory Engraved Browning Hi Power Renaissance 9mm
Description Browning Hi Power Renaissance chambered in 9mm with one, thirteen round removable magazine and a 4.7" barrel. Manufactured around 1968-1969 right before the serial number transition in 1969, with serial number T261150. Nearly full satin n...

3
Les Baer 1911 Premier II 6" 9mm Custom 1911
Description Les Baer 1911 Premier II chambered in 9mm with three, nine round removable magazines and a 6" match barrel with stainless bushing. Baer NM checkered steel frame with checkered wood grips and beveled mag well. Ambidextrious manual thumb sa...

4
Les Baer Premier II Super Tac .45 Custom 1911
Description Les Baer Premier II Super Tac chambered in .45 ACP with four, eight round removable magazines and a 5" match barrel. Baer NM checkered steel frame with checkered wood grips and beveled magazine well. Tactical ambidextrous manual thumb saf...

5
Mateba 6 Unica .357 Mag Revolver
Description UPDATE: TWO additional barrels have been added(8" & 4") that can readily convert this gun without a gunsmith, pictures added at end of reel. Barrels as new.... Mateba 6 Unica Auto-Revolver in .357 Magnum with a six round capacity and a 6"...

6
Magnum Research BFR .45 Colt/.410 Revolver
Description Magnum Research BFT chambered in .45 colt and .410 bore with a six-shot cylinder and 7.5" vented rib barrel with modified choke. Stainless steel barrel, frame, unfluted long cylinder, single action trigger and hammer. Smooth Bisley style ...

7
Magnum Research BFR .45-70 Govt Revolver
Description Magnum Research BFR chambered in .45-70 Government with a five-round cylinder and a 10" barrel. Stainless steel barrel, frame, unfluted long cylinder, single action trigger, and hammer. Smooth Bisley style grips and grip frame. Adjustable...

8
Magnum Research Desert Eagle .44 Mag Pistol
Description Magnum Research Desert Eagle chambered in .44 Remington magnum with two, eight round removable magazines and a 6" barrel. Manufactured in Israel by IWI and imported by Magnum Research. Brushed stainless steel frame with pebble textured ru...

9
IMI Magnum Research Desert Eagle .44 Mag Pistol
Description Magnum Research Desert Eagle chambered in .44 Remington Magnum with one, eight round removable magazine and a 6" barrel. Manufactured in Israel by IMI and imported by Magnum Research. Bright nickel steel frame and controls with textured p...

10
Pardini SP Bullseye .22 LR Semi Auto Pistol
Description Pardini SP Bullseye chambered in .22 long rifle with four, five round removable magazines and a 5" barrel. Black and silver finish with textured wood grips with bullseye palm support. Paddle style magazine release and fully adjustable tri...

11
Wilson Combat Classic 10mm Semi Auto Pistol
Description Wilson Combat Classic in 10mm with four, nine round removable magazines and a 5" barrel. Cocobolo wood Starburst grip plates. Armor-Tuff finished frame, serrated skeletonized trigger, hammer and serrated slide. Backstrap safety. Lower lef...

12
STI Perfect 10 10mm Semi Auto 2011
Description STI International Perfect 10 chambered in 10mm Auto with three, fourteen round removable magazines and a 6" barrel. Fully textured polymer grip frame with flared magazine well. Steel frame with full length under barrel accessories rail. A...

13
Ruger Old Model Blackhawk 3-Screw .357 Revolver
Description Ruger Old Model Blackhawk chambered in .357 Magnum with a six-shot cylinder and a 6.5" barrel. Manufactured in 1963 with serial number 47877. Blued barrel, flat top 3-screw frame, fluted cylinder, single action trigger, and hammer. Smooth...

14
Ruger NM Blackhawk .357 Maximum SA Revolver
Description Ruger New Model Blackhawk in .357 Maximum with a six round capacity and a 7.5" barrel. Smooth wood grip plates. Blued trigger guard, serrated trigger, hammer, frame, cylinder and barrel. Right ide of frame loading gate. Under barrel cylin...

15
3 Digit Ruger Hawkeye .256WM Single Shot Pistol
Description Ruger Hawkeye chambered in .256 Winchester Magnum with a single shot capacity and a 8.5" barrel. Manufactured in 1963 with a three digit serial of 251. Blued barrel, frame, and swing out breech block. Blued/stainless single action trigger...

16
Ruger Old Model Blackhawk Convertible .45 Colt/ACP
Description Ruger Pre-Warning 3 Screw Old Model Blackhawk Convertible chambered in .45 with two six-shot cylinder for .45 Colt and .45 ACP, and with a 7.5" barrel. Manufactured in only two years between 1971 and 1972 with serial number 45-02446. Blue...

17
Sig Sauer P226-S X-Series .40S&W Semi Auto Pistol
Description Sig Sauer P226-S X-Series chambered in .40 S&W with two, twelve round removable magazines and a 5" barrel. Sig Sauer INC Exeter NH. Stainless steel frame with checkered wood Hogue grips, flared magazine well, and enlarged magazine release...

18
Sig Sauer P220 Super Match .45 ACP SAO Pistol
Description Sig Sauer Custom Shop P220 Super Match chambered in .45 ACP with two, eight round removable magazines and a 5" barrel. Black finished alloy frame with checkered wood Sig grips and under barrel accessories rail. Single action trigger and h...

19
Walther PP West German .32 ACP Semi Auto Pistol
Description Walther PP in 7.65mm (.32 ACP) with two, seven round removable magazines and a 3.75" barrel. West German Police marked. Checkered composite grip plates. Blued frame, trigger guard, trigger, hammer and serrated slide. Left side of frame ch...

20
Walther PP West German .32 Semi Auto Pistol
Description Walther PP in 7.65mm (.32 ACP) with two, seven round removable magazines and a 3.75" barrel. West German Police marked. Checkered composite grip plates. Blued frame, trigger guard, trigger, hammer and serrated slide. Left side of frame ch...

21
Dan Wesson 445 Super Mag .445
Description Dan Wesson 445 Super Magnum in .445 CTG with a six round capacity and a 8" barrel. IHMSA member owned firearm with the serial number being the persons member number. These were ordered directly from Dan Wesson. Dimpled rubber Hogue Monogr...

22
Dan Wesson / NYIC 445 Super Mag 73 Rds
Description This lot is for four boxes of Dan Wesson 445 Super Mag 300 grain jacketed hollow point ammunition. Three of the boxes are complete with all twenty rounds of ammunition and one box is partial with thirteen out of twenty round of ammunition...

23
Sphinx SDP Compact 9mm Semi Auto Pistol
Description Sphinx SDP Compact chambered in 9mm with two, fifteen round removable magazines and a 3.7" black nitride barrel. FDE finished hard coat anodized aluminum frame with high cut beavertail, interchangeable grip inserts, beveled magazine well,...

24
TC Steve Herrett Contender .30 Herrett Pistol
Description Thompson Center Contender Steve Herrett Commemorative in .30 Herrett with a single round capacity and a 10" Bull barrel. One of five hundred made. Contoured wood grip. Blued engraved trigger guard, serrated trigger, frame, hammer and bar...

25
Uberti American Buntline .44 Mag Revolver
Description Uberti American Buntline chambered in .44 Remington Magnum with a six-shot cylinder and a 18" barrel. Manufactured in Italy by Uberti and imported by Uberti America, marked on the barrel. Blued barrel, fluted cylinder, trigger, and grip f...

26
Uberti/Navy Arms 1860 Henry .44-40 Lever Action
Description Uberti 1860 Henry chambered in .44-40 Winchester with a thirteen round capacity and a 24 1/4" barrel. Manufactured in Italy in 2001 by Uberti with a BP date code, and imported by Navy Arms, marked on the top of the barrel. Blued barrel, m...

27
Winchester M-1898 10Ga Signal Cannon
Description Winchester Signal Cannon Model 1898 in 10 gauge (Not For Ball) with a single round capacity and a 12" barrel. Black finished frame and finish worn blued barrel. Rear barrel breech door and trigger/firing pin. Underside has adjustment scre...

28
Furr Arms 1876 Camel 1/3 Scale .22LR Gatling Gun
Description Rare and desirable Furr Arms model 1876 Camel fully functioning 1/3 scale gatling gun chambered in .22 long rifle with one Broadwell drum feeding mechanism and ten, 7" nickel barrels. Mostly brass construction with walnut tripod legs. Ga...

29
Furr Functional James Rifle 6 Pdr Cannon 1/3 Scale
Description Most likely the work of Karl James Furr but is unsigned. 1/3 Scale James "Rifle" Field Cannon with a 22" bronze barrel and a 1 1/4" bore. The wheels are 19 3/8" diameter and the overall length is a little over 40". Constructed out of bras...

30
Antique 3-Digit S&W NM NO.3 Target .32-44 Revolver
Description Smith & Wesson New Model Number Three Target chambered in .32-44 S&W with a six-shot cylinder and a 6.5" barrel. Nickel finished barrel, frame, cylinder, single action hammer, and trigger. Brass plated side plate, trigger guard, and rear ...

31
S&W 27-3 50th Anniversary .357 Mag Revolver
Description Smith & Wesson Model 27-3 50th Anniversary 1935-1985 (The First Magnum April 8th 1935) in .357 Magnum with a six round capacity and a 5" barrel. Smooth wood grip plates. Blued frame, cylinder and barrel. Three T's. Case colored serrated T...

32
S&W 28-2 Highway Patrolman .357 Mag Revolver
Description Smith & Wesson model 28-2 Highway Patrolman chambered in .357 Magnum with a six-shot cylinder and a 6" barrel. Manufactured between 1978 and 1980 with serial number N588745. Satin blued barrel, frame, and fluted cylinder. Case colored tri...

33
S&W 29-3 Elmer Keith .44 Mag Revolver
Description Smith & Wesson Model 29-3 Elmer Keith 1899-1984 Commemorative in .44 Magnum with a six round capacity and a 4" barrel. Smooth wood grip plates. Blued frame, cylinder and barrel. Case colored serrated Target trigger and checkered Target ha...

34
Cased Smith & Wesson 27-2 .357 Magnum Revolver
Description Smith & Wesson 27-2 chambered in .357 Magnum with a six-shot cylinder and a 8 3/8" barrel. Manufactured between 1977 and 1978 with serial number N476853. Blued barrel, frame, fluted cylinder, and checkered cylinder release. Three T's with...

35
S&W 544 Texas Wagon Train .44-40 Revolver
Description Smith & Wesson model 544 Texas Wagon Train Commemorative chambered in .44-40 Winchester with a six-shot cylinder and a 5" barrel. Manufactured in 1986 with serial number TWT2096, one of 4,782 produced. Blued barrel, frame, and fluted cyli...

36
S&W 60 .38 S&W Spl Engraved Signed Revolver
Description Smith & Wesson Model 60 in .38 Smith & Wesson Special with a five round capacity and a 2" barrel. Aftermarket engraved by retired Winchester Master Engraver Jasper Salerno. His signature is behind the right grip plate on the frame. His in...

37
S&W 627-PC .357 Mag Performance Center Revolver
Description UPDATE: Eight round cylinder capacity. Smith & Wesson 627-PC chambered in .357 Magnum with a six-shot cylinder and a 5" barrel. Stainless steel frame, double action trigger, hammer, cylinder release, and barrel with polished flats. Polish...

38
S&W 629-4 Performance Center Hunter .44 Revolver
Description Smith & Wesson model 629-4 Performance Center hunter chambered in .44 Remington Magnum with a six-shot cylinder and a 6.5" barrel with a removable muzzle break and top optics rail. Stainless steel barrel, frame, unfluted cylinder, checker...

39
S&W No1 2nd Issue .22 RF Short Revolver
Description Smith & Wesson Model Number one, second issue in .22 Rimfire Short with a seven round capacity and a 3.25" octagon barrel. Mother of pearl grip plates. Nickel finished frame, solid trigger and barrel. Blued checkered hammer and cylinder. ...

40
S&W Pre Model 14 K-38 Masterpiece .38 Spl Revolver
Description Smith & Wesson Pre Model 14 K-38 Masterpiece chambered in .38 special with a six-shot cylinder and a 6" barrel with narrow rib. Manufactured in 1952 with serial number K140955. Blued barrel, five screw frame, fluted cylinder, and checkere...

41
S&W Pre Model 17 K-22 Masterpiece .22LR Revolver
Description Smith & Wesson Pre Model 17 K-22 Masterpiece chambered in .22 long rifle with a six-shot cylinder and a 6" barrel with narrow rib. Manufactured in 1952 with serial number K148205. Blued barrel, five screw frame, fluted cylinder, and check...

42
Smith & Wesson .500 Magnum Revolver
Description Smith & Wesson 500 chambered in .500 S&W Magnum with a five-shot cylinder and a 9" barrel with installed compensator. Stainless steel barrel, frame, fluted cylinder, and cylinder release. Case colored trigger and hammer. Pebble textured r...

43
Smith & Wesson .500 Magnum Revolver
Description Smith & Wesson 500 chambered in .500 S&W Magnum with a five-shot cylinder and a 8.375" barrel with installed compensator. Stainless barrel, frame, fluted cylinder, and controls. Black textured rubber S&W grips with finger grooves. S&W int...

44
Smith & Wesson 3 Schofield .45 S&W Revolver
Description Smith & Wesson Performance Center 1875 Model 3 Schofield in .45 Smith & Wesson with a six round capacity and a 7" barrel. Smooth premium wood grip plates. Blued frame, cylinder and barrel. Case colored trigger guard, trigger and hammer. F...

45
Colt Model 1878 12 Ga SxS Hammer Gun
Description Colt's PT. F.A. Mfg. Co. 12 gauge hammer gun chambered for 2-3/4" shells. This example dating to 1882 features 30" Damascus barrels choked MOD/CYL, solid concave rib with single bead, knurled hammers and release lever, double triggers, "C...

46
Engraved Colt Patterson 3rd Gen .36Cal Revolver
Description Limited Colt/Patent Firearms Co. Black Powder Series Patterson 3rd Gen chambered in .36 caliber with a six-shot cylinder and a 7.5" octagonal barrel. Number 037 with glossy blue finish and smooth wood grips. Hand engraved scrollwork and p...

47
Colt Sig Series 1861 Navy Gen. Custer .36 Cal
Description Colt Signature Series 1861 Navy General Custer chambered in .36 Caliber with a six-shot cylinder and a 7.5" barrel. Blued finish with hand engraved by Colt barrel, rod, cylinder, frame, hammer, and backstrap. Rosewood grips with checkere...

48
John Adams Sr. Engraved Colt 1903/08 .380 Pistol
Description Colt 1903/08 chambered in .380 ACP with one, seven round engraved removable magazine and a 3.75" barrel. Manufactured in 1922 with serial number 55694. Full nickel finish with C coverage (3/4) Master Class engraving by John Adams Sr. Smoo...

49
Colt Camp Perry Model .22 Target Pistol
Description Rare and desirable Colt Camp Perry model target pistol chambered in .22 LR. With serial number 2159 and dating to 1935 this single action only 2nd pattern model based upon a colt officers model frame and which is only one of about 2500 ev...

50
Colt Double Diamond Python/Officers 1911 Set
Description Colt 150th Anniversary Double Diamond matched set, manufactured in 1989 with serial numbers DD0339 and 0339DD, making this number 339 of only 1000 sets made. Included in the set is a Colt Python chambered in .357 Magnum with a 6" vented r...

51
Colt BOA .357 Mag Revolver W/Box 1 of 1200
Description Colt BOA chambered in .357 Magnum with a six-shot cylinder and a 6" vented rib barrel. Manufactured in the only year of production, 1985, as a limited run with serial number BOA1196. Making this revolver 1 of only 1200 total Colt BOA's pr...

52
Colt Python .357 Mag 8" Nickel Revolver
Description Colt Python chambered in .357 Magnum with a six-shot cylinder and a 8" vented rib barrel. Manufactured in 1981 with serial number K69140. Nickel finished barrel, frame, fluted cylinder, cylinder release, textured double action trigger, an...

53
Colt Python Custom Shop Engraved .357 Revolver
Description Colt Python Custom Shop Model D chambered in .357 Magnum with a six-shot cylinder and a 4.25" vented rib barrel. Stainless steel finish with Armory Style B+ Coverage Cut Engraving. Checkered wood grips with silver Rampant Colt medallions...

54
Colt Python Engraved Employee Edition .357 Mag
Description Colt Python 2020 Employee Edition chambered in .357 Magnum with a six-shot cylinder and a 6" vented rib barrel. Stainless steel finish with Class B, 3D Laser engraving done by Altamont Company. The engraving pattern was designed by John P...

55
Colt Python Hunter .357 Mag Revolver W/Case
Description Colt Python Hunter chambered in .357 Magnum with a six-shot cylinder and a 8" vented rib barrel with slots for mounting the included Leupold M8-2X scope with Colt/Leupold medallion. Manufactured only between 1980 and 1981 with serial numb...

56
Colt Real Tree Anaconda .44 Mag Revolver
Description Limited and desirable Colt Real Tree Anaconda chambered in .44 Remington Magnum with a six-shot cylinder and a 8" vented rib barrel. Manufactured in 1995 with serial number MM82160. Real Tree camo finished barrel, frame, fluted cylinder, ...

57
1977 Colt Python .357 Mag Revolver 2.5" BBL
Description Colt Python chambered in .357 magnum with a six-shot cylinder and a 2.5" vented rib barrel. Manufactured in 1977 with serial number 67070E. Blued barrel, frame, fluted cylinder, textured double action trigger, and hammer. Checkered wood g...

58
1970 Colt SAA 2nd Generation .45 Colt Revolver
Description Colt Single Action Army 2nd Generation chambered in .45 Colt with a six-shot cylinder and a 7.5" barrel. Manufactured in 1970 with serial number 58122SA. Nickel finished barrel, frame, fluted, cylinder, single action trigger, hammer, scre...

59
Colt Custom Shop SAA .38-40 Revolver
Description Colt Single Action Army in .38-40 with a six round capacity and a 4.75" barrel. Smooth wood grip plates. Nickel finished trigger guard, trigger, frame, cylinder, hammer and barrel. Right side of frame loading gate. Under barrel cylinder r...

60
Colt Custom Shop SAA .44-40 Win Revolver W/Letter
Description Colt Custom Shop Single Action Army CP Design chambered in .44-40 Winchester with a six-shot cylinder and a 3.5" barrel. Shipped July 19th 1994 with serial number S07338A in custom shop order #4417-B. Features a blued barrel, fluted cylin...

61
Colt Custom Shop SAA .45 LC Revolver
Description Colt Custom Shot Single Action Army Late Third Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. White natural IVO grip plates. Gold finished trigger guard, trigger, frame, hammer, cylinder and barrel. Cold ...

62
Colt Custom Shop SAA .45 LC Revolver
Description Colt Single Action Army Late Third Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. Natural horn grip plates. Blued trigger guard, trigger, hammer, cylinder and barrel. Case colored frame. Right side of fra...

63
Colt Custom Shop SAA .45 LC Revolver
Description Colt Custom Shop Single Action Army Late Third Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. White natural grip plates. Blued trigger, cylinder, hammer and barrel. Case colored frame. Right side loading ...

64
Colt Custom Shop Single Action Army .38-40
Description Colt SAA Late Third/Fourth Generation in .38-40 with a six round capacity and a 4.75" barrel. Smooth wood grip plates. Blued trigger guard, trigger, cylinder, hammer and barrel. Case colored frame. Right side of frame loading gate. Under ...

65
Colt SAA .45 LC Revolver
Description Colt Single Action Army 3rd Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. Stag horn grip plates. Polished Nickel finished trigger guard, frame, trigger, cylinder, hammer and barrel. Right side of frame l...

66
Colt Single Action Army .44 Spl Revolver
Description UPDATE: Revolver is in .44 SPECIAL. Colt SAA in .45 Colt (Long Colt) with a six round capacity and a 5.5" barrel. Checkered composite grip plates. Blued trigger guard, trigger, cylinder, hammer and barrel. Case colored frame/ Right side o...

67
Colt Custom Shop SAA .45 LC Revolver
Description Colt Custom Shop Single Action Army in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. Mother of Pearl grip plates. Gold finished trigger guard, trigger, frame, hammer, cylinder and barrel. Cold blued screws and extract...

68
Colt Buntline Special SAA 3rd Gen .45 Colt
Description Colt Buntline Special Model SAA 3rd Generation chambered in .45 Long Colt with a six-shot cylinder and a 12" barrel. Serial number SA44444 with nickel plated barrel, frame, fluted cylinder, single action trigger, and hammer. Smooth wood g...

69
Colt 1878 Frontier Six Shooter .44-40 DA Revolver
Description Colt 1878 Frontier Six Shooter in .44-40 with a six round capacity and a 7.5" barrel. Checkered composite grip plates. Blued frame, trigger guard, trigger, hammer, cylinder and barrel. Bottom of grip located lanyard loop. Right side of fr...

70
1992 Colt Custom Shop SAA .45LC Revolver
Description Colt Custom Shop Single Action Army chambered in .45 Long Colt with a six-shot cylinder and a 4 3/4" barrel. Manufactured in 1992 with serial number SA96603. Blued barrel, fluted cylinder, trigger guard, single action trigger, and grip fr...

71
Colt 1911 Gov Model .45/.38 Super Semi Auto Pistol
Description Colt 1911 Government Model in .45 ACP with three, seven round removable magazines and a 5" barrel. Checkered wood grip plates. Blued frame, checkered solid trigger, checkered hammer and serrated slide. Backstrap safety. Lower left side of...

72
1961 Colt Pre Gold Cup National Match .45 ACP 1911
Description UPDATE: This is a 1961 National Match, Colt did not inscribe "Gold Cup" prior to 1970, hence a "Pre-Gold Cup" National Match...Colt Gold Cup National Match chambered in .45 ACP with one, seven round removable magazine and a 5" NM barrel. ...

73
Colt Gold Cup Trophy .45 ACP 1911
Description Colt Gold Cup Trophy chambered in .45 ACP with two, eight round removable Colt magazines and a 5" NM barrel. Manufactured in 2011 with serial number GCT29410. Stainless steel frame with checkered rubber wrap around grips with silver Colt ...

74
Colt MK IV Govt Series 70 .45 ACP Semi Auto Pistol
Description Colt Government Model MK/IV 1911 Series 70 in .45 ACP with one, seven round removable magazine and a 5" barrel. Checkered Colt/Pachmayr rubber grip. Satin Nickel finished frame, hammer and slide. Blued solid serrated trigger, safety, slid...

75
Colt MK IV Govt Series 70 .45 ACP Semi Auto Pistol
Description Colt MK/IV Government Model Series 70 in .45 ACP with one, seven round removable magazine and a 5" barrel. Checkered wood grip plates. Blued frame, serrated trigger and serrated slide. Solid serrated trigger. Backstrap safety. Lower left ...

76
Colt MKIV Series 70 Gold Cup NM .45 1911
Description Colt MKIV Series '70 Gold Cup National Match chambered in .45 ACP with one, seven round Colt magazine and a 5" National Match barrel. Manufactured in 1980 with serial number 70N84083. Blued steel frame with checkered wood grips with Gold ...

77
Colt Super 38 .38 Super Semi Auto Pistol
Description Colt Super 38 in .38 Super with one, nine round removable magazine and a 5" barrel. Very Low serial number: 759. Checkered wood grip plates. Blued frame, checkered solid trigger, checkered hammer and serrated slide. Backstrap safety. Left...

78
Colt US Army 1911 .45ACP Semi Auto Pistol
Description Colt Model 1911 produced in 1918 with a "heart cut" frame and "double diamond" wooden grips. "UNITED STATES PROPERTY" marked frame, "G" stamped behind reset pin, with rounded spring guide, "S17" mark above magazine release, "P"/"H" marked...

79
U.S. Navy Contract Colt Model 1911 Semi Auto
Description U.S. Navy contract Colt model 1911 semi auto pistol chambered in .45 ACP . This example with serial number 3330 and dating between 1912 and 1918 is marked with the two-line, two-block Colt address and patent dates with the Rampant Colt be...

80
Barrett M99A1 .50 BMG Single Shot Rifle
Description Barrett Model 99A1 chambered in .50 Browning Machine Gun with a single shot capacity and a 29" fluted match grade barrel with a three port muzzle break. One piece coated aluminum receiver with full length top picatinny rail. The rail is m...

81
HK 91 .308 Semi Auto Rifle
Description Heckler & Koch model 91 roller delayed blowback rifle chambered in 7.62x51mm (.308 Winchester) with one, five round removable magazine, three, twenty round removable magazines, and a 18" barrel with a flash hider. Manufactured Germany in ...

82
HK 93 5.56 NATO Semi Auto Rifle
Description Heckler & Koch model 93 roller delayed blowback rifle chambered in 5.56x45mm NATO with one, five round removable magazine, two twenty-five removable magazines, and a 16" barrel with a flash hider. Manufactured Germany in 1981 with a IB da...

83
LWRCI M6IC DI Oscar Foxtrot 5.56 Other Firearm
Description LWRC International M6IC DI Oscar Foxtrot chambered in 5.56 with one, ten round removable magazine and a 13" 1-7 twist cold hammer forged NiCorr heavy barrel with a Surefire war comp three prong flash hider. LWRCI 12" handguard with full l...

84
Omega Gideon Shadow UMP Clone 9mm Pistol
Description Omega Gideon Shadow chambered in 9mm with one, fifteen round removable magazine and a 8" barrel with a tri lug muzzle. The H&K UMP is a widely sought after firearm with authentic Heckler & Koch UMP's never being imported for the civilian ...

85
Tommy Built Tactical TMP .45 ACP Semi Auto Other
Description Tommy Built Tactical TMP chambered in .45 ACP with one, ten round windowed magazine and a 12.5" threaded barrel with a HDPS Corp flash hider. Polymer upper receiver with three front HDPS picatinny rail sections with vertical grip. Full le...

86
MK Gun Mods Semi Auto Argentine FMK-3 9mm
Description MK Gun Mods was established as a firearms manufacturer in 2008 and specialized in semi-automatic versions of military firearms for collectors and reenactors. This FMK-3 chambered in 9mm is an example built by MK Gun Mods from an Argentine...

87
NOS Pre94 Thompson 1927 A3 .22 Semi Auto
Description New Old Stock and Pre Ban Auto Ordnance Corp of West Hurley manufactured Thompson model 1927 A3 chambered in .22LR. This example features a 16" finned barrel with Thompson marked Cutts type compensator, hardwood pistol foregrip, adjustabl...

88
Auto Ordnance Thompson Korean War .45 ACP
Description Auto Ordnance Thompson 1928 Korean War Commemorative issued by The American Historical Foundation, chambered in .45 ACP with one, twenty round removable magazine and a 16.5" barrel. Number 1166 of only 1500 made with serial number KW1166....

89
Auto Ordnance Thompson 1927A1 .45 ACP Rifle
Description West Hurley Auto Ordnance Thompson 1927 A1 "Tommy Gun" chambered in .45 ACP with one, ten round drum magazine and a 16.5" barrel with a muzzle break. Blued barrel upper receiver, lower, and controls. Top charging handle and left side padd...

90
Auto Ordnance Thompson 1927 A1 .45 ACP Rifle
Description Auto Ordnance Thompson 1927 A1 (Tommy Gun) chambered in .45 ACP with two, thirty round stick magazines and a 16.5" barrel with a muzzle break. Blued barrel upper receiver, lower, and controls. Top charging handle and left side paddle styl...

91
Colt / Ohio Ordnance 1928 .30-06 Belt Fed
Description Original Colt kit remanufactured by Ohio Ordnance Works model 1928 Water Cooled belt fed semi auto firearm chambered in .30-06 Springfield with a 24" barrel including the muzzle device and brass capped water cooling jacket. Manufactured b...

92
US Browning 1919A6 Belt Fed Semi Auto .308
Description Browning model 1919 belt fed semi auto chambered in .308. Unknown manufacturer and marked "1919A5" this example built on an Israeli 1919 parts kit has been assembled in the A6 configuration with bipod, carry handle and rear shoulder stock...

93
Transferable Smith & Wesson 76 9mm Sub Machinegun
Description Transferrable Smith & Wesson model 76 Select Fire sub machinegun chambered in 9mm with a 8" barrel, with mounted barrel shroud. Blow back operated open bolt machinegun with a ambidextrious three position selector with full auto, semi auto...

94
Transferable Ruger AC-556 Machine Gun .223
Description Transferrable Ruger model AC-556 full auto machine gun chambered in .223. The AC-556 is a Mini-14 rifle configured selective fire and was marketed to military and law enforcement. This example features an 13" barrel with a birdcage flash ...

95
Cobray / MAC M10A1 9mm/.45 ACP Machine Gun
Description Cobray/MAC, Military Armament Corporation Ingram M10A1 in 9mm or .45 ACP with eight, thirty two round and six, .45 caliber thirty round removable magazines and a 6" threaded barrel. Blued aftermarket MPA Defender marked fold out wire stoc...

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Premier Firearms Auction - Spring 2024
 Live Auction w/Online Bidding
Auction Date(s)
Saturday Apr 27, 2024 Completed
Auction Location

Plantsville, CT 06479
Company
Connecticut Firearms Auction

Website: www.ctfirearmsauction.com

Listing Terms and Conditions
Connecticut Firearms Auction Terms of Sale All bidders are required to read the Terms and Conditions of the Sale before bidding with Connecticut Firearms Auction LLC and/ or CT Firearms Auction collectively referred to below as �CTFA�. Those who bid are bound by these Terms and Conditions of the Sale, as amended by any oral announcement, published or posted notices, which together form the contract of the sale between the successful bidder �buyer�, �CTFA� and seller �consignor� of the lot. ACCEPTANCE OF TERMS: When bidding on any lot offered by CTFA, the bidder indicates acceptance of the following Terms of Sale. Any participation in the auction binds the bidder to agreement of these terms whether or not buyer has read or understood said terms. The terms in writing contained herein are subject to change without notice and bidder agrees that the most recently published Terms of Sale as published or amended on the website at the beginning of the auction shall apply. BIDDER ELIGIBILITY AND REGISTRATION: Buyers warrant that they are at least age 18 and possess a valid photo ID. Buyers are required to provide a verifiable address of residence, phone number, and email in writing at least 48 hours prior to auction date. Long guns will only be sold to persons 18 years of age, or older. Handguns will only be sold to those persons 21 years of age or older. It is the bidder�s responsibility to take buyers premium, shipping, and insurance costs into consideration when bidding on items. It is the buyers responsibility to personally inspect auction items, or request condition reports and detailed questions prior to bidding. TITLE: Title to all merchandise shall pass to the highest bidder at the fall of the auctioneer�s hammer. The buyer will then assume all risk and full responsibility of the lot purchased once ownership has changed. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. BUYER�S PREMIUM: A buyers premium will be added to all successful bids and is payable by the buyer as part of the total purchase cost. Base buyers premium (phone, live in-person and in-house absentee) of 18% applies to phone and direct absentee bidding.This is the lowest buyers premium offered, and all bids must be submitted at least 24 hours prior to auction time. A 3% discount is offered for cash, check, wire, and money order payments. Buyers premium for bidding through all online platforms (including www.ctfirearmsauction.com) is 21 % with a 3% discount for cash equivalent. A 3% Discount applies for Cash or Check Equivalent. Split payment methods (cash/credit) lose 3% discount. Buyers premium is non-negotiable. Split payment methods (cash/credit) lose 3% discount. LIMITED GUARANTEE: CTFA makes every effort to accurately describe all items offered in its sales. The descriptions and condition reports carry a limited guarantee. It is a guarantee to protect the buyer against errors in descriptive fact and major discrepancies that would have a significant effect upon the value of the item. This limited guarantee covers the following: DESCRIPTIVE FACTS: Manufacturer, model, caliber, serial numbers, barrel length, special features, major restoration, modification, counterfeits, reproductions or major fabrications not disclosed in the description. CONDITION DISCREPANCIES: It is the bidder�s responsibility (present, online, or absentee bidders) to determine by inspection by themselves (or a hired professional) the exact condition of each item prior to bidding on the item. CTFA makes every effort to follow the commonly accepted and current condition guidelines for modern and antique firearms such as the NRA Modern and Antique grading system, Blue Book percentage of finish rating, and Standard Catalog of Firearms Modern grading. It is important to note that these systems have changed over the years, and present different opinions based on the edition and authors. Condition reports are the opinion of CTFA and represent the observations of the cataloger. BIDDERS RESPONSIBILITIES: It is the bidder�s responsibility to initiate contact with CTFA in request for additional information regarding the items. Submit all questions regarding upcoming auction items at least 48 hours prior to the date of auction. CTFA will make every effort to answer all submitted questions in a timely manner. In-Person Bidders must examine all items prior to purchase and again upon receipt. Any discrepancies must be noted prior to leaving the facility. If bidding via absentee or online, then it is the bidders responsibility to examine the lot immediately upon receipt. If a major discrepancy should be discovered, it is the buyers responsibility to contact us immediately. The limited guarantee is null and void 28 days after the auction date (NOT THE DATE OF RECEIPT). If a buyer pays late and receives items late, through action or inaction on their part, the buyer is disqualified from any guarantee. Under no circumstances will CTFA be responsible for lost profits or other financial damages. If it is agreed that an item may be returned, it is the buyer's responsibility to return it in the same state and condition as received. Returned items that are modified, damaged by buyer, or mishandled void all guarantees. LIMITATIONS: The limited guarantee covers major discrepancies in condition reports, such as error in fact, visible repairs or restorations, or major differences in percent of finish or bore(+/- 20%). This limited guarantee is only available to the buyer of record. Please refer to POST SALE RETURN POLICY. Except as stated in the limited guarantee above, CTFA will not be held responsible for typographical errors or errors of omission. This limited guarantee does NOT cover imperfections, patina, slight damages, handling marks, natural imperfections, undisclosed minor blemishes, finish differences, wood-to-metal fit issues, surface cracks or chips in wood, dings and dents, unverifiable age, and other similar differences that are inherent in the firearms or other antiques and collectibles offered for sale. Firearm internal mechanisms and moving parts are not inspected, and guns are not test fired unless otherwise noted. If mechanical or other working parts are inoperable, even if working at the time of sale, CTFA is not liable due to the inherent nature of the age of these used items. CTFA will not be responsible for shipping costs, after auction appraisal fees, testing or any other post auction costs. This limited guarantee DOES NOT APPLY to any ammunition whatsoever. All Ammunition will be sold �as-is� (see below) AS-IS: Auction lots and items offered with the designation �AS-IS�, �Poor condition�,or �For parts or restoration� are offered without guarantee, all sales are final and sold without refund or buyer recourse. POST SALE RETURN AND REFUND POLICY: If a major description or condition discrepancy is discovered within 28 calendar days of the auction, a buyer may submit a request in writing for a full refund under the following conditions: The request for refund must be received in writing before the end of the 28th day. The auction lot in question must be received by CTFA within 3 days of the request for return and refund. After receipt of the lot in question, CTFA will perform an evaluation, and determine the validity of the request. If a return and refund is granted, CTFA will notify the buyer within 7 calendar days of receipt. CTFA does not offer adjustments or partial refunds. Refunds are only given for the total hammer price, and restocking fees up to the total amount of buyers premium may apply. Accepted refunds are paid only by paper check, and submitted to the buyer 30 days after receipt of items. FIREARMS TRANSFER AND ELIGIBILITY: All firearm transfers will be in strict accordance with all International, Federal, State and local laws. Buyer is responsible for adhering to all country, state and local laws before bidding. If a bidder is unable to import, purchase, own, or receive a firearm for any reason, they should not bid on these items. If a buyer later determines they cannot legally own a firearm or accept delivery, the bid is still a valid contract, and the buyer is still obligated to remit payment in accordance with payment terms. CTFA does not offer returns, refunds or cancellations on the basis of ineligibility or failure to facilitate transfer. BUYER OF RECORD: All firearms must transfer to the registered buyer on record. CTFA will not modify, or re-invoice any firearms for another party. DENIAL OF TRANSFER: If �Denied� by FBI / NICS background check buyers will not be able to take possession of the firearm and the firearm will be consigned to the next available firearm auction. Dealers and Individuals that bid on and win items own the items and are fully responsible for payment within terms regardless of whether the FBI / NICS approves their taking physical possession of the items. CTFA will not cancel the sale due to disapproval for any reason. If a buyer is appealing a �Denied� decision, we will hold the firearm for a grace period of 30 days, with monthly storage fees in effect on the 31st day. IN-PERSON PAYMENT AND PICKUP: Only the person to whom the bidder number is registered may accept transfer of the firearm(s) at the conclusion of the sale � Federal Law disallows anyone else from accepting the transfer. Buyers may not bid on or pay for modern firearms on behalf of another party. Modern Firearms (1898 and later) Can be picked up in person with a valid CT Pistol Permit or applicable Certificate Can be picked up by FFL Licensee or listed responsible person with �Live Copy� of License Eligible Curio & Relic Firearms can be picked by by C&R Holders with �Live Copy� of license. Non Connecticut Residents (without FFL or C&R) may not pick up modern or NFA firearms in person at our CT Facility. Antique Firearms Can be picked up in person with valid photo ID by persons over the age of 18. No background check required, all states of residence eligible. Non-Guns may be picked up by any eligible buyer (or buyers agent) with a valid photo ID. Ammunition: Any buyer receiving ammunition in the State of CT must possess a Valid CT Pistol Permit, Long Gun Certificate, or Ammunition Certificate per state laws. SHIPPING: Shipping and transportation costs are the responsibility of the buyer. Unless otherwise noted, all items shipped in-house, and will be billed on your invoice. Modern firearms are legally required to be shipped to a BATF licensed FFL business within their state of residence for transfer. For states that allow shipment of C&R firearms to the C&R license holder, CTFA reserves the right to ship those C&R firearms to the address listed on C&R license. Modern handguns only ship via UPS 2-Day Air or U.S.P.S. Priority Mail. Modern long guns are shipped via UPS ground. IT IS THE BUYERS RESPONSIBILITY TO CONTACT THEIR RECEIVING FFL AND ARRANGE TRANSFER AND FFL REMITTANCE. The receiving dealer must submit a current copy of their FFL for each auction invoice. FFL�s are not kept on file. FFL�s should be submitted to sales@ctfirearmsauction.com or through our website here: https://ctfirearmsauction.com/submit-your-ffl/ FEES: Standard Hand Guns ship for $40. Standard long guns ship for $55. Oversize shipping charges will apply to guns over 45� Overall Length. Additional fees apply for shipping addresses outside the Continental United States. DISASSEMBLY: Firearms, auction items, and accessories may be disassembled for shipping. This may include scopes, cases, barrels, and stocks. ADDRESS: CTFA is not responsible for incorrect shipping addresses. Buyers must verify the shipping address listed on their invoice prior to shipment. Standard items packed internally by CTFA will ship approximately one to fourteen business days after payment AND applicable paperwork (FFL) is received. INSURANCE: All firearms in transit are insured at no additional cost up to $2,500 per shipment. Packages valued over $2,500 require insurance at a rate of 1% per invoiced dollar unless the buyer declines in writing 48 hours prior to package shipment. OVERSIZE: Certain auction items exceed standard shipping fees and may require oversized and heavy shipping surcharges. Every effort is made to note these charges prior to catalog publication, but may be included on a buyers invoice post auction without notice. AMMUNITION: Ammunition does not ship with an associated gun. Separate charges apply for ammunition shipments, and may require heavy or oversize charges. INTERNATIONAL: CTFA welcomes international buyers. CTFA can provide, upon request, recommended firearms exporters and international shippers. It shall be the potential buyer�s sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property and for paying all shipping costs, customs and duties on the items. By law, CTFA cannot, and will not, declare lesser values for any international purchases and all shipments will include the invoice with purchase totals including the buyer�s premium and shipping cost. CTFA does not offer in-house international shipping (or export) any firearms, ammunition, or weapons REGARDLESS OF AGE OR STATUS OF THE LOT. All international shipping must be performed by a licensed exporter or third party shipper. CTFA does offer domestic shipping to the exporter of the buyer's choice. Buyer is responsible for contacting and employing the exporter. Exporter FFL documents must be sent to sales@ctfirearmsauction.com prior to domestic shipment. CTFA strongly recommends making contact with an exporter prior to bidding for pricing, process and timeline information. GOODS MADE FROM OR CONTAINING MATERIALS FROM PROTECTED SPECIES: CTFA does not accept any responsibility or liability for the sale of items containing materials from protected species or for any omission in marking or labeling goods as containing materials from protected species. Such material includes, but is not limited to, ivory from elephants and walruses, tortoise shell, crocodile skin, whalebone, rhinoceros horn, some species of coral and certain woods. Restrictions on the importation, exportation, sale, transfer, and/or possession of goods containing materials from protected species derive from international, federal, and state laws and regulations promulgated thereunder. Laws include, but are not limited to, the Convention on International Trade in Endangered Species of Flora and Fauna (CITES), the Endangered Species Act (ESA) and the Marine Mammals Protection Act (MMPA). States currently restricting trade of protected species include, but are not limited to, California, New York and New Jersey. Prospective buyers are on notice that several countries completely prohibit importation of property made, all or in part, of protected materials. Some countries require special permits, such as a CITES permit, from the relevant regulating authority in the countries of exportation and importation as well. Potential buyers intending to import the property into another country should be familiar with the relevant customs laws and regulations prior to bidding on goods containing material from protected species. Regulations may vary as the U.S. generally prohibits importation of articles containing material(s) from species it has designated endangered or threatened if the articles are less than 100 years old, subject to certain exceptions. It shall be the potential buyer�s sole responsibility to research and satisfy the requirements of any laws and regulations that apply to the import and export of property as described in the aforementioned paragraphs. All buyers agree to comply with any and all domestic and international restrictions on the trade of protected species as a condition of the sale. Please note that the ability to obtain an export license or certificate does not ensure the ability to obtain an import license or certificate in another country, and vice versa. It is the buyer�s responsibility to obtain any export or import licenses and/or certificates as well as any other required documentation. CTFA is not able to assist the buyer in attempting to obtain the appropriate licenses and/or certificates, and there is no assurance that an export license or certificate can be obtained. The inability or delay in obtaining permits, licenses or other permissions to import or export goods containing material from protected species will not constitute a basis for rescission or cancellation of the sale of said goods or the delay in payment of purchased items in accordance with these Bidder Terms and Conditions. BIDDING TERMS: The auctioneer will determine the highest bidder. The auctioneer alone has the right to reopen the bidding of an item at any time if deemed necessary due to a dispute. If there is a tie bid between the floor and Internet or absentee bid, the floor bid takes precedence. In the event of a tie internet bid, the auctioneer will choose the highest bidder. CTFA and its representatives reserve the right to remove those attendees who impede preview and/or the auction. CTFA is not responsible for any errors in bids, omissions of bids, or failure to execute bids and shall have no liability to any bidder for any technical or other failure associated with internet, absentee bidding, or telephone bidding. In the event of an on-site utilities or internet services interruption, the auction will be suspended until such a time that the utility can be restored. Consignors are not allowed to bid on their own merchandise nor have any agent bid on their behalf. If the Auctioneer recognizes such bidding, the Auctioneer reserves the right to withdraw any or all items consigned by the offending consignor. ABSENTEE BIDDING: CTFA will accept absentee bids if pre-authorized by mail, phone, email, online, or in-person. In-Person absentee bidders must use the absentee bid form and clearly mark the lot number, title and maximum bid amount. If there are two (2) identical bids placed on the same item, priority will be given to the first bid received. All bids must be left in increments as published for that particular auction. If a bid is �out of increment,� the auctioneer will automatically round the bid down to the next correct increment. Seller(s) agree to allow the Auctioneer to accept and execute absentee bids in a competitive manner for potential buyers and under the CTFA absentee bidding terms and conditions. During the live sale, the auctioneer will execute absentee bids competitively (starting with the lowest possible bid point) up to the maximum amount indicated. ONLINE BIDDING: Online bidding through www.CTfirearmsauction.com, Live Auctioneers, Invaluable, Hibid, Proxibid, or other bidding platforms may be available. These terms and conditions apply, as well as additional terms and conditions for each third-party platform. These Terms & Conditions will take deference over any posted online terms and agreements. A surcharge may be added for third party online platforms. Refer to the bidding platform of choice for the final buyer�s premium. If there is a tie bid between the internet bidding venues and the floor, the floor bid takes precedence. Due to our fast paced auctions and bids coming from floor bidders, phone bidders, Internet bidders and absentee bids, the auctioneer has the final word on all item(s) sold. The bidder assumes the risk of winning an item online and discovering the item has sold to another bidder. This is due to the final call of the auctioneer and the operator not being able to re-open that lot. Registered Online bidders are fully responsible for accidental bidding as if they bid normally. BID RESULTS: CTFA will only contact successful bidders. Invoices are sent within 24 hours of auction end. The invoice will include the lot info, hammer price, premium, shipping, insurance, and any other charges that apply. Please hold phone inquiries regarding bid success until after receiving the invoice. For verifications, CTFA cannot provide winning bid information until the second business day after the auction. CTFA will not provide bidder information to any outside sources. TELEPHONE BIDDING: Requests for phone lines must be received at least three (3) days prior to the auction date. CTFA cannot guarantee phone lines but will make every attempt to accommodate those who wish to participate live via phones. Phone lines are provided to qualified bidders at CTFA's preference. Please contact us directly to arrange phone bidding.203-710-0189. Minimum bid requirements may apply. BIDDERS PRESENT AND TAKING ITEMS DURING AND AFTER AUCTION: Since item liability transfers upon a successful bid, items paid for must be packed, transported and/or removed by the buyer at his/ her own risk after the close of the sale. CTFA recommends that buyers arrange insurance for all items immediately upon becoming the highest bidder. If any employee or agent of CTFA shall pack or transport the merchandise, it is fully at the risk and responsibility and expense of the buyer. CTFA shall not be held liable for any loss or damage that may be caused by the said agent or employee. RESERVES: The majority of our items are unreserved, but occasionally items may carry a moderate reserve. Please note that when a lot carries a reserve, the reserve is at or below the low estimate. In the case of a reserved item, the seller has authorized the auctioneer to bid on their behalf until the reserve price is reached. The auctioneer will note if a buyer is bidding against the reserve. PAYMENT TERMS: CTFA accepts Visa, MasterCard, Discover, American Express, personal checks, certified checks, wire transfers, money orders, and cash. Any invoice totaling more than $50,000 must be paid within three (3) business days of the auction date. All other merchandise must be paid in full within seven (7) days of the date of the invoice.Upon payment in full, it is the bidder�s responsibility to submit any additional information necessary, including an FFL, to initiate transfer and shipping. Invoices over $5,000 may be subject to mandatory check or wire payment. All transaction fees associated with payment method are non-refundable. All goods not retrieved by buyer within 30 days after the invoice date, shall be subject to a storage fee of $50 per item per month. Buyer authorizes CTFA to sell, at their standard commission and consignment contract terms, any goods not retrieved after a 90 day period in any manner deemed appropriate by CTFA and the proceeds will be applied to any outstanding balance due from the buyer. CREDIT CARDS: Link for online credit card payment will be listed in the buyers invoice. Credit Card payments are subject to maximum buyers premium, and can be discounted by 3% if payment is received by cash, check, money order or wire transfer. Credit Card payments are only accepted from the buyers name listed on the invoice. CTFA reserves the right to refuse to ship to a different address than the billing address on the credit card being used. CTFA does not allow credit card chargebacks for any reason and any delivered firearms subject to a chargeback will be considered as a stolen gun and reported immediately to Law Enforcement. Credit cards information is not stored and payment for invoices is the buyers responsibility. We do not use third party billing services and the buyers credit card will not be automatically charged. CHECK: There will be a $40.00 service charge for returned checks. Make checks payable to: CT Firearms Auction LLC. Checks can be mailed to: CT Firearms Auction LLC 8 Metals Drive, Plantsville CT 06479. CTFA reserves the right to hold items paid for by personal or company check until said check clears (14 days). CTFA has the right to hold all checks over $2,000. Customers who have an established successful buying history with CTFA may be exempt from this requirement. First time buyers paying by check may be subject to additional requirements such as bank letter of credit. WIRE TRANSFERS: Wire transfers are accepted for invoices totalling more than $5,000 USD. Invoices below $5,000 may be subject to a $30 transaction fee. NON-PAYMENT: In the few situations where a successful bidder does not remit payment when due, CTFA will proceed with the legal steps necessary to protect its interests and will block the bidder from future auction participation. SALES TAX: CTFA is required to collect sales tax where applicable. It is the bidder�s responsibility to know the sales and use tax law in their locality and know what sales and use tax will be due upon their purchase. Lots are subject to all applicable state and local taxes, unless appropriate resale permits are on file with CTFA prior to invoicing. Bidder agrees to pay CTFA the actual amount of tax due in the event that sales tax is not properly collected due to: 1) an expired, inaccurate, or inappropriate tax certificate or declaration, 2) an incorrect interpretation of the applicable statute, 3) or any other reason. The appropriate form or certificate must be on file and verified by CTFA five days prior to Auction, or tax must be paid; only if such form or certificate is received by CTFA within 4 days after the Auction can a refund of tax paid be made. Lots from different auctions may not be aggregated for sales tax purposes. NFA TRANSFERS: National Firearms Act Weapons and Destructive Devices (DD) Processing to Dealers: Buyer must provide CTFA with a copy of their receiving dealers active FFL and their SOT. Estimated time for processing and approval of the required Form 3 can take 3 days to 3 months, dealer to dealer via E-File is usually less than a week. Individuals IN CT: Law requires a completed Form 4, or Form 5 for deactivated guns. CTFA will prepare and sign the front of the applicable transfer form, and send to the individual buyer or meet with them directly. Individuals are responsible for completing requirements for fingerprints and photo, as well as completing applicable portions of the reverse side of the form. Estimated time for processing and approval of Form 4 is 6-12+ months.Dealers and Individuals that bid on and win NFA or DD items own the items and are fully responsible for payment within terms regardless of whether the BATF approves their taking physical possession of the items. CTFA will not cancel the sale due to BATF disapproval for any reason. SAFETY: Since all firearms sold are �collectible� items, CTFA does not test the safety or warrant functionality of these firearms. All firearm purchases should be examined by a certified gunsmith prior to shooting. DENIAL OF SALE: CTFA reserves the right to deny the sale of a firearm to any buyer, for any reason, at any time in the sales process. WITHDRAWAL OF PROPERTY: CTFA reserves the right to withdraw any property from the auction at any time and shall have no liability whatsoever for such withdrawal. DEFINITIONS: CURIO & RELIC (C&R): Per BATF: To be recognized as C&R items, 478.11 specifies that firearms must fall within one of the following categories: Firearms which were manufactured at least 50 years prior to the current date, but not including replicas of such firearms; Firearms which are certified by the curator of a municipal, State, or Federal museum which exhibits firearms to be curios or relics of museum interest; and Any other firearms which derive a substantial part of their monetary value from the fact that they are novel, rare, bizarre, or because of their association with some historical figure, period, or event. Firearms automatically attain C&R status when they are 50 years old. Any firearm that is at least 50 years old, and in its original configuration, would qualify as a C&R firearm. It is not necessary for such firearms to be listed in ATF�s C&R list. ANTIQUE FIREARMS: Per BATF: The term �antique firearm� means� any firearm (including any firearm with a matchlock, flintlock, percussion cap, or similar type of ignition system) manufactured in or before 1898; or any replica of any firearm described in subparagraph (A) if such replica� is not designed or redesigned for using rimfire or conventional centerfire fixed ammunition, or uses rimfire or conventional centerfire fixed ammunition which is no longer manufactured in the United States and which is not readily available in the ordinary channels of commercial trade; or any muzzle loading rifle, muzzle loading shotgun, or muzzle loading pistol, which is designed to use black powder, or a black powder substitute, and which cannot use fixed ammunition. For purposes of this subparagraph, the term �antique firearm� shall not include any weapon which incorporates a firearm frame or receiver, any firearm which is converted into a muzzle loading weapon, or any muzzle loading weapon which can be readily converted to fire fixed ammunition by replacing the barrel, bolt, breechblock, or any combination thereof.� FFL: Federal Firearms Licensee with a current and valid license to be a firearms Dealer / Manufacturer / Importer CURIO & RELIC HOLDER: FFL type 03 or C&R license or Collector NFA (National Firearms Act of 1934) Weapons (commonly called �Class 3�): A shotgun having a barrel or barrels of less than 18 inches in length; A weapon made from a shotgun if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 18 inches in length; A rifle having a barrel or barrels of less than 16 inches in length; A weapon made from a rifle if such weapon as modified has an overall length of less than 26 inches or a barrel or barrels of less than 16 inches in length; Any other weapon, as defined in subsection (e); A machine gun; Any silencer (as defined in section 921 of title 18, United States Code); and A destructive device. DESTRUCTIVE DEVICES: A missile having an explosive or incendiary charge of more than 1/4 oz. Any type of weapon by whatever name known which will, or which may readily be converted to expel a projectile, by the action of an explosive or other propellant, the barrel or barrels of which have a bore greater than one-half inch in diameter. A combination of parts designed and intended for use in converting a device into a destructive device and from which a destructive device can be readily assembled. MODERN FIREARMS: Any firearm that does not already classify as a C&R, NFA Weapon or Antique and is under the purview of the Gun Control Act of 1968.
Our Annual Spring Premier Firearms and Military Auction. Featuring Colt, Smith & Wesson, Antiques, World War Two, NFA and Fully Transferable Machine Guns, Hunting Rifles and Fine Shotguns.

1
Browning Hi Power 9mm Semi Auto Pistol
Description Browning Hi-Power in 9mm with two, thirteen round removable magazines and a 4.75" barrel. Made in Belgium and assembled in Portugal. Smooth laminated wood grip plates. Blued frame, trigger, hammer and serrated slide. Lower left side of fr...

2
Factory Engraved Browning Hi Power Renaissance 9mm
Description Browning Hi Power Renaissance chambered in 9mm with one, thirteen round removable magazine and a 4.7" barrel. Manufactured around 1968-1969 right before the serial number transition in 1969, with serial number T261150. Nearly full satin n...

3
Les Baer 1911 Premier II 6" 9mm Custom 1911
Description Les Baer 1911 Premier II chambered in 9mm with three, nine round removable magazines and a 6" match barrel with stainless bushing. Baer NM checkered steel frame with checkered wood grips and beveled mag well. Ambidextrious manual thumb sa...

4
Les Baer Premier II Super Tac .45 Custom 1911
Description Les Baer Premier II Super Tac chambered in .45 ACP with four, eight round removable magazines and a 5" match barrel. Baer NM checkered steel frame with checkered wood grips and beveled magazine well. Tactical ambidextrous manual thumb saf...

5
Mateba 6 Unica .357 Mag Revolver
Description UPDATE: TWO additional barrels have been added(8" & 4") that can readily convert this gun without a gunsmith, pictures added at end of reel. Barrels as new.... Mateba 6 Unica Auto-Revolver in .357 Magnum with a six round capacity and a 6"...

6
Magnum Research BFR .45 Colt/.410 Revolver
Description Magnum Research BFT chambered in .45 colt and .410 bore with a six-shot cylinder and 7.5" vented rib barrel with modified choke. Stainless steel barrel, frame, unfluted long cylinder, single action trigger and hammer. Smooth Bisley style ...

7
Magnum Research BFR .45-70 Govt Revolver
Description Magnum Research BFR chambered in .45-70 Government with a five-round cylinder and a 10" barrel. Stainless steel barrel, frame, unfluted long cylinder, single action trigger, and hammer. Smooth Bisley style grips and grip frame. Adjustable...

8
Magnum Research Desert Eagle .44 Mag Pistol
Description Magnum Research Desert Eagle chambered in .44 Remington magnum with two, eight round removable magazines and a 6" barrel. Manufactured in Israel by IWI and imported by Magnum Research. Brushed stainless steel frame with pebble textured ru...

9
IMI Magnum Research Desert Eagle .44 Mag Pistol
Description Magnum Research Desert Eagle chambered in .44 Remington Magnum with one, eight round removable magazine and a 6" barrel. Manufactured in Israel by IMI and imported by Magnum Research. Bright nickel steel frame and controls with textured p...

10
Pardini SP Bullseye .22 LR Semi Auto Pistol
Description Pardini SP Bullseye chambered in .22 long rifle with four, five round removable magazines and a 5" barrel. Black and silver finish with textured wood grips with bullseye palm support. Paddle style magazine release and fully adjustable tri...

11
Wilson Combat Classic 10mm Semi Auto Pistol
Description Wilson Combat Classic in 10mm with four, nine round removable magazines and a 5" barrel. Cocobolo wood Starburst grip plates. Armor-Tuff finished frame, serrated skeletonized trigger, hammer and serrated slide. Backstrap safety. Lower lef...

12
STI Perfect 10 10mm Semi Auto 2011
Description STI International Perfect 10 chambered in 10mm Auto with three, fourteen round removable magazines and a 6" barrel. Fully textured polymer grip frame with flared magazine well. Steel frame with full length under barrel accessories rail. A...

13
Ruger Old Model Blackhawk 3-Screw .357 Revolver
Description Ruger Old Model Blackhawk chambered in .357 Magnum with a six-shot cylinder and a 6.5" barrel. Manufactured in 1963 with serial number 47877. Blued barrel, flat top 3-screw frame, fluted cylinder, single action trigger, and hammer. Smooth...

14
Ruger NM Blackhawk .357 Maximum SA Revolver
Description Ruger New Model Blackhawk in .357 Maximum with a six round capacity and a 7.5" barrel. Smooth wood grip plates. Blued trigger guard, serrated trigger, hammer, frame, cylinder and barrel. Right ide of frame loading gate. Under barrel cylin...

15
3 Digit Ruger Hawkeye .256WM Single Shot Pistol
Description Ruger Hawkeye chambered in .256 Winchester Magnum with a single shot capacity and a 8.5" barrel. Manufactured in 1963 with a three digit serial of 251. Blued barrel, frame, and swing out breech block. Blued/stainless single action trigger...

16
Ruger Old Model Blackhawk Convertible .45 Colt/ACP
Description Ruger Pre-Warning 3 Screw Old Model Blackhawk Convertible chambered in .45 with two six-shot cylinder for .45 Colt and .45 ACP, and with a 7.5" barrel. Manufactured in only two years between 1971 and 1972 with serial number 45-02446. Blue...

17
Sig Sauer P226-S X-Series .40S&W Semi Auto Pistol
Description Sig Sauer P226-S X-Series chambered in .40 S&W with two, twelve round removable magazines and a 5" barrel. Sig Sauer INC Exeter NH. Stainless steel frame with checkered wood Hogue grips, flared magazine well, and enlarged magazine release...

18
Sig Sauer P220 Super Match .45 ACP SAO Pistol
Description Sig Sauer Custom Shop P220 Super Match chambered in .45 ACP with two, eight round removable magazines and a 5" barrel. Black finished alloy frame with checkered wood Sig grips and under barrel accessories rail. Single action trigger and h...

19
Walther PP West German .32 ACP Semi Auto Pistol
Description Walther PP in 7.65mm (.32 ACP) with two, seven round removable magazines and a 3.75" barrel. West German Police marked. Checkered composite grip plates. Blued frame, trigger guard, trigger, hammer and serrated slide. Left side of frame ch...

20
Walther PP West German .32 Semi Auto Pistol
Description Walther PP in 7.65mm (.32 ACP) with two, seven round removable magazines and a 3.75" barrel. West German Police marked. Checkered composite grip plates. Blued frame, trigger guard, trigger, hammer and serrated slide. Left side of frame ch...

21
Dan Wesson 445 Super Mag .445
Description Dan Wesson 445 Super Magnum in .445 CTG with a six round capacity and a 8" barrel. IHMSA member owned firearm with the serial number being the persons member number. These were ordered directly from Dan Wesson. Dimpled rubber Hogue Monogr...

22
Dan Wesson / NYIC 445 Super Mag 73 Rds
Description This lot is for four boxes of Dan Wesson 445 Super Mag 300 grain jacketed hollow point ammunition. Three of the boxes are complete with all twenty rounds of ammunition and one box is partial with thirteen out of twenty round of ammunition...

23
Sphinx SDP Compact 9mm Semi Auto Pistol
Description Sphinx SDP Compact chambered in 9mm with two, fifteen round removable magazines and a 3.7" black nitride barrel. FDE finished hard coat anodized aluminum frame with high cut beavertail, interchangeable grip inserts, beveled magazine well,...

24
TC Steve Herrett Contender .30 Herrett Pistol
Description Thompson Center Contender Steve Herrett Commemorative in .30 Herrett with a single round capacity and a 10" Bull barrel. One of five hundred made. Contoured wood grip. Blued engraved trigger guard, serrated trigger, frame, hammer and bar...

25
Uberti American Buntline .44 Mag Revolver
Description Uberti American Buntline chambered in .44 Remington Magnum with a six-shot cylinder and a 18" barrel. Manufactured in Italy by Uberti and imported by Uberti America, marked on the barrel. Blued barrel, fluted cylinder, trigger, and grip f...

26
Uberti/Navy Arms 1860 Henry .44-40 Lever Action
Description Uberti 1860 Henry chambered in .44-40 Winchester with a thirteen round capacity and a 24 1/4" barrel. Manufactured in Italy in 2001 by Uberti with a BP date code, and imported by Navy Arms, marked on the top of the barrel. Blued barrel, m...

27
Winchester M-1898 10Ga Signal Cannon
Description Winchester Signal Cannon Model 1898 in 10 gauge (Not For Ball) with a single round capacity and a 12" barrel. Black finished frame and finish worn blued barrel. Rear barrel breech door and trigger/firing pin. Underside has adjustment scre...

28
Furr Arms 1876 Camel 1/3 Scale .22LR Gatling Gun
Description Rare and desirable Furr Arms model 1876 Camel fully functioning 1/3 scale gatling gun chambered in .22 long rifle with one Broadwell drum feeding mechanism and ten, 7" nickel barrels. Mostly brass construction with walnut tripod legs. Ga...

29
Furr Functional James Rifle 6 Pdr Cannon 1/3 Scale
Description Most likely the work of Karl James Furr but is unsigned. 1/3 Scale James "Rifle" Field Cannon with a 22" bronze barrel and a 1 1/4" bore. The wheels are 19 3/8" diameter and the overall length is a little over 40". Constructed out of bras...

30
Antique 3-Digit S&W NM NO.3 Target .32-44 Revolver
Description Smith & Wesson New Model Number Three Target chambered in .32-44 S&W with a six-shot cylinder and a 6.5" barrel. Nickel finished barrel, frame, cylinder, single action hammer, and trigger. Brass plated side plate, trigger guard, and rear ...

31
S&W 27-3 50th Anniversary .357 Mag Revolver
Description Smith & Wesson Model 27-3 50th Anniversary 1935-1985 (The First Magnum April 8th 1935) in .357 Magnum with a six round capacity and a 5" barrel. Smooth wood grip plates. Blued frame, cylinder and barrel. Three T's. Case colored serrated T...

32
S&W 28-2 Highway Patrolman .357 Mag Revolver
Description Smith & Wesson model 28-2 Highway Patrolman chambered in .357 Magnum with a six-shot cylinder and a 6" barrel. Manufactured between 1978 and 1980 with serial number N588745. Satin blued barrel, frame, and fluted cylinder. Case colored tri...

33
S&W 29-3 Elmer Keith .44 Mag Revolver
Description Smith & Wesson Model 29-3 Elmer Keith 1899-1984 Commemorative in .44 Magnum with a six round capacity and a 4" barrel. Smooth wood grip plates. Blued frame, cylinder and barrel. Case colored serrated Target trigger and checkered Target ha...

34
Cased Smith & Wesson 27-2 .357 Magnum Revolver
Description Smith & Wesson 27-2 chambered in .357 Magnum with a six-shot cylinder and a 8 3/8" barrel. Manufactured between 1977 and 1978 with serial number N476853. Blued barrel, frame, fluted cylinder, and checkered cylinder release. Three T's with...

35
S&W 544 Texas Wagon Train .44-40 Revolver
Description Smith & Wesson model 544 Texas Wagon Train Commemorative chambered in .44-40 Winchester with a six-shot cylinder and a 5" barrel. Manufactured in 1986 with serial number TWT2096, one of 4,782 produced. Blued barrel, frame, and fluted cyli...

36
S&W 60 .38 S&W Spl Engraved Signed Revolver
Description Smith & Wesson Model 60 in .38 Smith & Wesson Special with a five round capacity and a 2" barrel. Aftermarket engraved by retired Winchester Master Engraver Jasper Salerno. His signature is behind the right grip plate on the frame. His in...

37
S&W 627-PC .357 Mag Performance Center Revolver
Description UPDATE: Eight round cylinder capacity. Smith & Wesson 627-PC chambered in .357 Magnum with a six-shot cylinder and a 5" barrel. Stainless steel frame, double action trigger, hammer, cylinder release, and barrel with polished flats. Polish...

38
S&W 629-4 Performance Center Hunter .44 Revolver
Description Smith & Wesson model 629-4 Performance Center hunter chambered in .44 Remington Magnum with a six-shot cylinder and a 6.5" barrel with a removable muzzle break and top optics rail. Stainless steel barrel, frame, unfluted cylinder, checker...

39
S&W No1 2nd Issue .22 RF Short Revolver
Description Smith & Wesson Model Number one, second issue in .22 Rimfire Short with a seven round capacity and a 3.25" octagon barrel. Mother of pearl grip plates. Nickel finished frame, solid trigger and barrel. Blued checkered hammer and cylinder. ...

40
S&W Pre Model 14 K-38 Masterpiece .38 Spl Revolver
Description Smith & Wesson Pre Model 14 K-38 Masterpiece chambered in .38 special with a six-shot cylinder and a 6" barrel with narrow rib. Manufactured in 1952 with serial number K140955. Blued barrel, five screw frame, fluted cylinder, and checkere...

41
S&W Pre Model 17 K-22 Masterpiece .22LR Revolver
Description Smith & Wesson Pre Model 17 K-22 Masterpiece chambered in .22 long rifle with a six-shot cylinder and a 6" barrel with narrow rib. Manufactured in 1952 with serial number K148205. Blued barrel, five screw frame, fluted cylinder, and check...

42
Smith & Wesson .500 Magnum Revolver
Description Smith & Wesson 500 chambered in .500 S&W Magnum with a five-shot cylinder and a 9" barrel with installed compensator. Stainless steel barrel, frame, fluted cylinder, and cylinder release. Case colored trigger and hammer. Pebble textured r...

43
Smith & Wesson .500 Magnum Revolver
Description Smith & Wesson 500 chambered in .500 S&W Magnum with a five-shot cylinder and a 8.375" barrel with installed compensator. Stainless barrel, frame, fluted cylinder, and controls. Black textured rubber S&W grips with finger grooves. S&W int...

44
Smith & Wesson 3 Schofield .45 S&W Revolver
Description Smith & Wesson Performance Center 1875 Model 3 Schofield in .45 Smith & Wesson with a six round capacity and a 7" barrel. Smooth premium wood grip plates. Blued frame, cylinder and barrel. Case colored trigger guard, trigger and hammer. F...

45
Colt Model 1878 12 Ga SxS Hammer Gun
Description Colt's PT. F.A. Mfg. Co. 12 gauge hammer gun chambered for 2-3/4" shells. This example dating to 1882 features 30" Damascus barrels choked MOD/CYL, solid concave rib with single bead, knurled hammers and release lever, double triggers, "C...

46
Engraved Colt Patterson 3rd Gen .36Cal Revolver
Description Limited Colt/Patent Firearms Co. Black Powder Series Patterson 3rd Gen chambered in .36 caliber with a six-shot cylinder and a 7.5" octagonal barrel. Number 037 with glossy blue finish and smooth wood grips. Hand engraved scrollwork and p...

47
Colt Sig Series 1861 Navy Gen. Custer .36 Cal
Description Colt Signature Series 1861 Navy General Custer chambered in .36 Caliber with a six-shot cylinder and a 7.5" barrel. Blued finish with hand engraved by Colt barrel, rod, cylinder, frame, hammer, and backstrap. Rosewood grips with checkere...

48
John Adams Sr. Engraved Colt 1903/08 .380 Pistol
Description Colt 1903/08 chambered in .380 ACP with one, seven round engraved removable magazine and a 3.75" barrel. Manufactured in 1922 with serial number 55694. Full nickel finish with C coverage (3/4) Master Class engraving by John Adams Sr. Smoo...

49
Colt Camp Perry Model .22 Target Pistol
Description Rare and desirable Colt Camp Perry model target pistol chambered in .22 LR. With serial number 2159 and dating to 1935 this single action only 2nd pattern model based upon a colt officers model frame and which is only one of about 2500 ev...

50
Colt Double Diamond Python/Officers 1911 Set
Description Colt 150th Anniversary Double Diamond matched set, manufactured in 1989 with serial numbers DD0339 and 0339DD, making this number 339 of only 1000 sets made. Included in the set is a Colt Python chambered in .357 Magnum with a 6" vented r...

51
Colt BOA .357 Mag Revolver W/Box 1 of 1200
Description Colt BOA chambered in .357 Magnum with a six-shot cylinder and a 6" vented rib barrel. Manufactured in the only year of production, 1985, as a limited run with serial number BOA1196. Making this revolver 1 of only 1200 total Colt BOA's pr...

52
Colt Python .357 Mag 8" Nickel Revolver
Description Colt Python chambered in .357 Magnum with a six-shot cylinder and a 8" vented rib barrel. Manufactured in 1981 with serial number K69140. Nickel finished barrel, frame, fluted cylinder, cylinder release, textured double action trigger, an...

53
Colt Python Custom Shop Engraved .357 Revolver
Description Colt Python Custom Shop Model D chambered in .357 Magnum with a six-shot cylinder and a 4.25" vented rib barrel. Stainless steel finish with Armory Style B+ Coverage Cut Engraving. Checkered wood grips with silver Rampant Colt medallions...

54
Colt Python Engraved Employee Edition .357 Mag
Description Colt Python 2020 Employee Edition chambered in .357 Magnum with a six-shot cylinder and a 6" vented rib barrel. Stainless steel finish with Class B, 3D Laser engraving done by Altamont Company. The engraving pattern was designed by John P...

55
Colt Python Hunter .357 Mag Revolver W/Case
Description Colt Python Hunter chambered in .357 Magnum with a six-shot cylinder and a 8" vented rib barrel with slots for mounting the included Leupold M8-2X scope with Colt/Leupold medallion. Manufactured only between 1980 and 1981 with serial numb...

56
Colt Real Tree Anaconda .44 Mag Revolver
Description Limited and desirable Colt Real Tree Anaconda chambered in .44 Remington Magnum with a six-shot cylinder and a 8" vented rib barrel. Manufactured in 1995 with serial number MM82160. Real Tree camo finished barrel, frame, fluted cylinder, ...

57
1977 Colt Python .357 Mag Revolver 2.5" BBL
Description Colt Python chambered in .357 magnum with a six-shot cylinder and a 2.5" vented rib barrel. Manufactured in 1977 with serial number 67070E. Blued barrel, frame, fluted cylinder, textured double action trigger, and hammer. Checkered wood g...

58
1970 Colt SAA 2nd Generation .45 Colt Revolver
Description Colt Single Action Army 2nd Generation chambered in .45 Colt with a six-shot cylinder and a 7.5" barrel. Manufactured in 1970 with serial number 58122SA. Nickel finished barrel, frame, fluted, cylinder, single action trigger, hammer, scre...

59
Colt Custom Shop SAA .38-40 Revolver
Description Colt Single Action Army in .38-40 with a six round capacity and a 4.75" barrel. Smooth wood grip plates. Nickel finished trigger guard, trigger, frame, cylinder, hammer and barrel. Right side of frame loading gate. Under barrel cylinder r...

60
Colt Custom Shop SAA .44-40 Win Revolver W/Letter
Description Colt Custom Shop Single Action Army CP Design chambered in .44-40 Winchester with a six-shot cylinder and a 3.5" barrel. Shipped July 19th 1994 with serial number S07338A in custom shop order #4417-B. Features a blued barrel, fluted cylin...

61
Colt Custom Shop SAA .45 LC Revolver
Description Colt Custom Shot Single Action Army Late Third Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. White natural IVO grip plates. Gold finished trigger guard, trigger, frame, hammer, cylinder and barrel. Cold ...

62
Colt Custom Shop SAA .45 LC Revolver
Description Colt Single Action Army Late Third Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. Natural horn grip plates. Blued trigger guard, trigger, hammer, cylinder and barrel. Case colored frame. Right side of fra...

63
Colt Custom Shop SAA .45 LC Revolver
Description Colt Custom Shop Single Action Army Late Third Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. White natural grip plates. Blued trigger, cylinder, hammer and barrel. Case colored frame. Right side loading ...

64
Colt Custom Shop Single Action Army .38-40
Description Colt SAA Late Third/Fourth Generation in .38-40 with a six round capacity and a 4.75" barrel. Smooth wood grip plates. Blued trigger guard, trigger, cylinder, hammer and barrel. Case colored frame. Right side of frame loading gate. Under ...

65
Colt SAA .45 LC Revolver
Description Colt Single Action Army 3rd Generation in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. Stag horn grip plates. Polished Nickel finished trigger guard, frame, trigger, cylinder, hammer and barrel. Right side of frame l...

66
Colt Single Action Army .44 Spl Revolver
Description UPDATE: Revolver is in .44 SPECIAL. Colt SAA in .45 Colt (Long Colt) with a six round capacity and a 5.5" barrel. Checkered composite grip plates. Blued trigger guard, trigger, cylinder, hammer and barrel. Case colored frame/ Right side o...

67
Colt Custom Shop SAA .45 LC Revolver
Description Colt Custom Shop Single Action Army in .45 Colt (Long Colt) with a six round capacity and a 4.75" barrel. Mother of Pearl grip plates. Gold finished trigger guard, trigger, frame, hammer, cylinder and barrel. Cold blued screws and extract...

68
Colt Buntline Special SAA 3rd Gen .45 Colt
Description Colt Buntline Special Model SAA 3rd Generation chambered in .45 Long Colt with a six-shot cylinder and a 12" barrel. Serial number SA44444 with nickel plated barrel, frame, fluted cylinder, single action trigger, and hammer. Smooth wood g...

69
Colt 1878 Frontier Six Shooter .44-40 DA Revolver
Description Colt 1878 Frontier Six Shooter in .44-40 with a six round capacity and a 7.5" barrel. Checkered composite grip plates. Blued frame, trigger guard, trigger, hammer, cylinder and barrel. Bottom of grip located lanyard loop. Right side of fr...

70
1992 Colt Custom Shop SAA .45LC Revolver
Description Colt Custom Shop Single Action Army chambered in .45 Long Colt with a six-shot cylinder and a 4 3/4" barrel. Manufactured in 1992 with serial number SA96603. Blued barrel, fluted cylinder, trigger guard, single action trigger, and grip fr...

71
Colt 1911 Gov Model .45/.38 Super Semi Auto Pistol
Description Colt 1911 Government Model in .45 ACP with three, seven round removable magazines and a 5" barrel. Checkered wood grip plates. Blued frame, checkered solid trigger, checkered hammer and serrated slide. Backstrap safety. Lower left side of...

72
1961 Colt Pre Gold Cup National Match .45 ACP 1911
Description UPDATE: This is a 1961 National Match, Colt did not inscribe "Gold Cup" prior to 1970, hence a "Pre-Gold Cup" National Match...Colt Gold Cup National Match chambered in .45 ACP with one, seven round removable magazine and a 5" NM barrel. ...

73
Colt Gold Cup Trophy .45 ACP 1911
Description Colt Gold Cup Trophy chambered in .45 ACP with two, eight round removable Colt magazines and a 5" NM barrel. Manufactured in 2011 with serial number GCT29410. Stainless steel frame with checkered rubber wrap around grips with silver Colt ...

74
Colt MK IV Govt Series 70 .45 ACP Semi Auto Pistol
Description Colt Government Model MK/IV 1911 Series 70 in .45 ACP with one, seven round removable magazine and a 5" barrel. Checkered Colt/Pachmayr rubber grip. Satin Nickel finished frame, hammer and slide. Blued solid serrated trigger, safety, slid...

75
Colt MK IV Govt Series 70 .45 ACP Semi Auto Pistol
Description Colt MK/IV Government Model Series 70 in .45 ACP with one, seven round removable magazine and a 5" barrel. Checkered wood grip plates. Blued frame, serrated trigger and serrated slide. Solid serrated trigger. Backstrap safety. Lower left ...

76
Colt MKIV Series 70 Gold Cup NM .45 1911
Description Colt MKIV Series '70 Gold Cup National Match chambered in .45 ACP with one, seven round Colt magazine and a 5" National Match barrel. Manufactured in 1980 with serial number 70N84083. Blued steel frame with checkered wood grips with Gold ...

77
Colt Super 38 .38 Super Semi Auto Pistol
Description Colt Super 38 in .38 Super with one, nine round removable magazine and a 5" barrel. Very Low serial number: 759. Checkered wood grip plates. Blued frame, checkered solid trigger, checkered hammer and serrated slide. Backstrap safety. Left...

78
Colt US Army 1911 .45ACP Semi Auto Pistol
Description Colt Model 1911 produced in 1918 with a "heart cut" frame and "double diamond" wooden grips. "UNITED STATES PROPERTY" marked frame, "G" stamped behind reset pin, with rounded spring guide, "S17" mark above magazine release, "P"/"H" marked...

79
U.S. Navy Contract Colt Model 1911 Semi Auto
Description U.S. Navy contract Colt model 1911 semi auto pistol chambered in .45 ACP . This example with serial number 3330 and dating between 1912 and 1918 is marked with the two-line, two-block Colt address and patent dates with the Rampant Colt be...

80
Barrett M99A1 .50 BMG Single Shot Rifle
Description Barrett Model 99A1 chambered in .50 Browning Machine Gun with a single shot capacity and a 29" fluted match grade barrel with a three port muzzle break. One piece coated aluminum receiver with full length top picatinny rail. The rail is m...

81
HK 91 .308 Semi Auto Rifle
Description Heckler & Koch model 91 roller delayed blowback rifle chambered in 7.62x51mm (.308 Winchester) with one, five round removable magazine, three, twenty round removable magazines, and a 18" barrel with a flash hider. Manufactured Germany in ...

82
HK 93 5.56 NATO Semi Auto Rifle
Description Heckler & Koch model 93 roller delayed blowback rifle chambered in 5.56x45mm NATO with one, five round removable magazine, two twenty-five removable magazines, and a 16" barrel with a flash hider. Manufactured Germany in 1981 with a IB da...

83
LWRCI M6IC DI Oscar Foxtrot 5.56 Other Firearm
Description LWRC International M6IC DI Oscar Foxtrot chambered in 5.56 with one, ten round removable magazine and a 13" 1-7 twist cold hammer forged NiCorr heavy barrel with a Surefire war comp three prong flash hider. LWRCI 12" handguard with full l...

84
Omega Gideon Shadow UMP Clone 9mm Pistol
Description Omega Gideon Shadow chambered in 9mm with one, fifteen round removable magazine and a 8" barrel with a tri lug muzzle. The H&K UMP is a widely sought after firearm with authentic Heckler & Koch UMP's never being imported for the civilian ...

85
Tommy Built Tactical TMP .45 ACP Semi Auto Other
Description Tommy Built Tactical TMP chambered in .45 ACP with one, ten round windowed magazine and a 12.5" threaded barrel with a HDPS Corp flash hider. Polymer upper receiver with three front HDPS picatinny rail sections with vertical grip. Full le...

86
MK Gun Mods Semi Auto Argentine FMK-3 9mm
Description MK Gun Mods was established as a firearms manufacturer in 2008 and specialized in semi-automatic versions of military firearms for collectors and reenactors. This FMK-3 chambered in 9mm is an example built by MK Gun Mods from an Argentine...

87
NOS Pre94 Thompson 1927 A3 .22 Semi Auto
Description New Old Stock and Pre Ban Auto Ordnance Corp of West Hurley manufactured Thompson model 1927 A3 chambered in .22LR. This example features a 16" finned barrel with Thompson marked Cutts type compensator, hardwood pistol foregrip, adjustabl...

88
Auto Ordnance Thompson Korean War .45 ACP
Description Auto Ordnance Thompson 1928 Korean War Commemorative issued by The American Historical Foundation, chambered in .45 ACP with one, twenty round removable magazine and a 16.5" barrel. Number 1166 of only 1500 made with serial number KW1166....

89
Auto Ordnance Thompson 1927A1 .45 ACP Rifle
Description West Hurley Auto Ordnance Thompson 1927 A1 "Tommy Gun" chambered in .45 ACP with one, ten round drum magazine and a 16.5" barrel with a muzzle break. Blued barrel upper receiver, lower, and controls. Top charging handle and left side padd...

90
Auto Ordnance Thompson 1927 A1 .45 ACP Rifle
Description Auto Ordnance Thompson 1927 A1 (Tommy Gun) chambered in .45 ACP with two, thirty round stick magazines and a 16.5" barrel with a muzzle break. Blued barrel upper receiver, lower, and controls. Top charging handle and left side paddle styl...

91
Colt / Ohio Ordnance 1928 .30-06 Belt Fed
Description Original Colt kit remanufactured by Ohio Ordnance Works model 1928 Water Cooled belt fed semi auto firearm chambered in .30-06 Springfield with a 24" barrel including the muzzle device and brass capped water cooling jacket. Manufactured b...

92
US Browning 1919A6 Belt Fed Semi Auto .308
Description Browning model 1919 belt fed semi auto chambered in .308. Unknown manufacturer and marked "1919A5" this example built on an Israeli 1919 parts kit has been assembled in the A6 configuration with bipod, carry handle and rear shoulder stock...

93
Transferable Smith & Wesson 76 9mm Sub Machinegun
Description Transferrable Smith & Wesson model 76 Select Fire sub machinegun chambered in 9mm with a 8" barrel, with mounted barrel shroud. Blow back operated open bolt machinegun with a ambidextrious three position selector with full auto, semi auto...

94
Transferable Ruger AC-556 Machine Gun .223
Description Transferrable Ruger model AC-556 full auto machine gun chambered in .223. The AC-556 is a Mini-14 rifle configured selective fire and was marketed to military and law enforcement. This example features an 13" barrel with a birdcage flash ...

95
Cobray / MAC M10A1 9mm/.45 ACP Machine Gun
Description Cobray/MAC, Military Armament Corporation Ingram M10A1 in 9mm or .45 ACP with eight, thirty two round and six, .45 caliber thirty round removable magazines and a 6" threaded barrel. Blued aftermarket MPA Defender marked fold out wire stoc...