Spring Sporting
Previous Page Listing ID#: 1601262

Auction Location

PRENTICE, WI 54556
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Friday Mar 8, 12:00 PM
Bidding Ends: Sunday Mar 17, 07:00 PM
Auction Type
 Online Auction 
Company Information
Bennett Auction Service

Contact: Adam Kielsmeier
Phone: 715-657-0078
Email: adam@bennettauctionservice.com
Website: bennettauctionservice.com

GoToAuction.com ID#: 9708
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Information

3000
EXTRA lot

3001
EXTRA lot

466
Hobart Handler 140 MIG wire feed welder. Runs either gasless flux core or solid wire with shield gas. See lot 524 for gas bottle and regulator.

524
Carbon dioxide bottle is 18" with valve. Comes with a Miller regulator. Bottle has 80 psi of gas, will ship empty. Fits Lot 466 and other welders.

393
No Shipping. 1 quart of Citgo Extra Range Motor Oil

394
No Shipping & must be 21 to purchase. Calvert Special Candian Rye Whiskey. Federal seal intact.

395
No Shipping & must be 21 to purchase. Beam's Choice "Beethoven" Kentucky Straight Bourbon Whiskey. Comes in original box. Federal Seal is intact.

396
No shipping & must be 21 to purchase. Beam's Ruby Glass Decanter comes in original box. Ph. Boilieux deluxe decanter of fine California brandy. Federal seal still intact

397
Two 30 round Magpul AR-15 magazines, Emag. Magazines are new, comes with dust covers.

398
Two AR-15 magazines and blackhawk pouch. Mags are Brownells and Bushmaster

399
30 round Magpul Emag AR-15 magazine and Blackhawk magazine pouch,

400
Perfectly violet lilac tea pieces incl 9" tea pot, three 2-1/2" tea cups with saucers and plates. Bottom is marked 'Tomina E-OH hand painted Nippon'. Some chips in the pitcher pour spout, one cup. possibly more.

401
2 Blackhawk AR-15 magazine pouches and a canteen jacket.

402
Harley Davidson analog wristwatch with black leather band, model no HDM100. Face of watch measures 1-1/2" and strap is 3/4". Watch winds but hopefully just needs a battery.

408
2010 GMC Sierra SLT truck, VIN 1GTSKWE33AZ149797 has 192253 miles and extended cab. Truck is in good condition overall. Runs and drives well.

403
Harley Davidson Motorcycles belt buckle, model no 99437-05Y and other skull with cross bones belt buckle and death angel ring, men's size 14.

404
Outdoor lamp and yellow construction sight light. Yellow light stands 14" tall.

405
Fantastic Plastic faux falcon to deter the little unwanted critters from your yard or shop. Falcon stands 16" tall. Currently mounted to 8" piece of wood for a quick hang on the side of the garage or shed. Hardware included!!

406
Cast Iron Silver Dollar Pancake Pan measures approx 9" across.

409
Cub Cadet Ultima ZT146 zero-turn riding lawn mower has a Kohler 7000 series engine. Mower is in good condition, hyrdrostatic drives and deck work as they should.

410
Winchester and other ear mufs, a Milwaukee Bucks Coors Light flag, and more.

411
Craftsman 19.2 volt drill/driver and angle grinder with a battery. Both tools run well and are in pretty good condition.

412
Craftsman 19.2 volt power tool set incl. 1/2" drill, angle grinder, a multi tool with quick detach blade chuck, a battery, and charger. All the tools run and are in good condition.

413
Stanley matrick and SAE chrome wrenches, and Stanley screwdrivers. Wrenches from 9mm to 14mm, and 5/16" to 11/16", see pics for completeness.

414
Craftsman 19.2 volt reciprocating saw. The saw runs, has a quick change blade, battery, and charger.

415
Two battery tenders with 1.25 amp charger or maintainer for 6 volt or 12 volt batteries.

416
Craftsman pneumatic 1/2" impact wrench, is model 875.191183, and is in good condition.

417
Stihl electric chainsaw, is model MSA 140C, in very good condition, runs well, comes with a battery, and charger. The saw has a 10" bar, fair chain, comes with an AK 30 battery, nice saw.

407
2002 Honday Odyssey mini van, VIN 2HKRL18602H590008 has 211,293 miles. Van is in decent condition and could use a good cleaning. Passenger interior door panel is missing and should be replaced. Runs and drives fine.

418
Craftsman laser tack sliding compound miter chopsaw. The saw runs, has a laser guide, runs a 7-1/2" blade, and is a nice little saw.

419
Craftsman 19.1 volt saw set incl. 5-1/2" circular saw, a reciprocating saw, a battery, and charger. Both tools run, the reciprocating saw has a quick change chuck, the curcular saw is missing blade bolt.

503
Craftsman Pro Series rolling toolbox. The box measures 52" x 21" x 42" tall, has nice brawer liner in most drawers, rolls smooth, nice latching drawers with good slides, good toolchest.

420
Craftsman 4-1/8" jointer / planer. The jointer has a 5/8 hp motor, a cast iron base, and adjustable fence. Measures 24" long overall, and comes on a 28" x 18" x 24" tall.

421
DeWalt 13" planer. The planer runs, has dust and chip collection, rough cut and finishing cut settings, takes up to 6" tall boards, comes with three double sided blades, and more. The planer has a chip out of the back of the blade well, is missing blade screws, the third blade keeper and the third blade. Nice machine with a little work.

422
Fishing pole rack, measures 48" tall and holds 18 rods.

423
Louisville 16' extension ladder, rails are pretty straight.

424
Werner 4' folding aluminum ladder, has a 225 pound capacity.

425
Extra heavy duty exrendable folding ladder with a 300 pound capacity. Stands 56" tall collapsed.

426
Louisville 8' folding aluminum ladder, the ladder is straight, sturdy, and has a 250 pound capacity.

427
Famous Trails metal detector, has an extendable arm, takes 6 AA's and appears to be in good shape.

428
Craftsman 9 gallon 3.5 HP vaccum / blower cleaner, comes with a length of hose and runs.

429
Cub Cadet brush saw, or weed eater. The Cadet BC280 has a 27cc 2 stroke engine, comes with two changeable arms, incl. a brush arm, and a weed arm, has papers, and extra string.

430
Pair of 6' long 9" wide metal ATV or similar ramps.

431
Craftsman hand cart, has some welldone repairs, and stands 43" tall.

432
4 foot tall spool of fencing, spool measures 10" in diameter.

433
Schumaker fully automatic battery charger or starter. The charger is marked Built 4 Starting with a 200 amp start setting, altornator tester, and battery tester. Charger does both 6 and 12 volt batteries. Unit powers up and is in good condition.

434
Schumaker fully automatic battery charger or starter. The charger is marked Built 4 Starting with a 200 amp start setting, altornator tester, and battery tester. Charger does both 6 and 12 volt batteries. Unit powers up and is in good condition.

435
Louisville 6' folding fiberglass ladder, is sturdy and tight, and in good used condition.

436
Chanellock pick axe. The pick axe has a tight 36" handle, and measures 15" edge to tip.

437
Seymore DG10 poste hole digger, has work polished handles, and fair shovels.

438
Shovels for evry season, Truper aluminum grain shovel, Suncast snow shovel, and a spade shovel.

439
Libman 18" shop broom.

440
NIB Avalanche snow rake, if you havent seen how these work go look it up. The rake has a 24" wide cut, is the deluxe 20 version, and is NIB. This makes raking roofs fun.

441
Truper sledge hammer with a tight 35" oak handle.

442
Double bit axe with a tight 28" handle.

443
Rolatape model RT312 rolling measure, has extendable handle up to 36" long, and counts and resets as should.

444
Three adjustable clamps up to 22" long overall.

445
Auto tint welding helmet with an awesome patriotic design. The helmet has adjustable sensitivity and tint.

446
Sturdy two step folding step stool, measures 36" tall overall when open.

447
Pruning and trimming lopers incl. Corona dual cut lopers, and Yardshark trimmers with extendable handles.

448
Extendable stick magnet, great for jobsite clean up. Extends to 39" long.

449
No shipping. Stanley framing square, 4' and 2' levels, more.

450
Two pry bars up to 36" long.

451
High lift ratcheting jack stands 4' tall and is great for off roading adventures. Raises and lowers.

452
We think this is a Hydro Steel type garden hose, shorter is approx 20' and longer about 45'.

453
Hydrosteel garden hose is approx 50' long with good ends. Lightweight hose is crush and kink resistant.

454
Hydrosteel garden hose is approx 50' long with good ends. Lightweight hose is crush and kink resistant.

455
Five and two gallon gas totes, both have spouts.

456
Pair of steel car ramps with a 6,500 pound capacity between the pair, stand 9" tall.

457
Stihl BGA 57 electric leaf plower with extendable spout. The blower is in very good condition, runs, comes with papers, a battery, and a charger.

458
Pair of steel car ramps, measure 36" long, and 9" tall.

459
Rustic weathered wooden box, measures 31" x 14" x 10" tall.

460
Five and two gallon gas totes, both have spouts.

461
Near new folding metal saw horses with a 5-1/2" x 34" top. Nice pair.

462
Igloo Island Breeze 48 QT cooler. The cooler is in very good condition, and measures 24" x 14" x 15" tall.

463
4-1/2" angle grinder attachments and consumables incl. flapwheels, cut off wheels, guard, more.

464
Two garden hoses, larger spool is approx 30" in diameter. Both hoses appear to be in good condition.

465
Craftsman 3 gallon 1 HP air sompressor with a 135 max PSI. The compressor appears to be in good condition, runs, and builds pressure.

467
Tow totes and storage containers incl. Rubbermade and others.

468
Pittsburgh racing 1.5 ton rapid pump floor jack. The jack raises to 10", might be low on fluid.

469
Country Pro 6.5 HP wood chipper with a Kohler 196C engine. The chipper shows little use, has a 20" x 12" hopper, and stands 43" tall overall.

470
Craftsman 27cc blower or vaccum, is in good condition, runs and blows, great for yard work this summer.

471
Central Machinery 12 ton hydraulic shop press, stands 54" tall, and has an adjustable bottom tray.

472
Craftsman variable speed rotary tool, comes with drills, drinding, sanding bits, and more.

473
Craftsman, Will, and other aviation shears.

474
Pliers incl. snapring pliers, slip joint pliers, needle nose, more.

475
Punches, cold chisels, and more incl. brass, and others.

476
Hyper Tough 4-1/2" mini circular saw, great for small jobs. Rus, and is in good condition.

477
Craftsman 4-1/2" angle grinder, runs well.

478
Skil jig saw with laser cut line. The saw runs, is model 4495, has quick change blade, three speeds, and low vibration.

479
Makita 4-1/2" angle grinder, is model 9557PB, runs, comes with guard, and wrench.

480
Stanley and other aviation shears and cutters incl. Fat Max and others.

481
Stanley socket and wrench set, comes with 1/4", 3/8", and 1/2" drive ratchets, and sockets. The kit has matric, SAE, deepwell and shallow sockets, nut driver, wrenches, more.

482
Ace and other plier, slip joint pliers, and clippers.

483
Stanley screwdrivers incl. phillips, and flat. Comes with a set of Force picks.

484
Large and small Stanley adjustable pliers, linemans pliers, more.

485
Stanley Fat Max adjustable pliers, side cutters, needle nose pliers, more.

486
Screwdrivers and other incl. Stanley, Will, and others.

487
Craftsman variable speed rotary tool, comes with buffers, drinding, sanding bits, and more.

488
Greenlee, Stanley, and other chisels up to 1-1/2" wide.

489
Vector por, Sure Built, and other screwdrivers up to 15" long.

490
Huge Duralast adjustable slip joint pliers, measure 17" closed.

491
Duralast 12 point half moon wrench set, and several other box and open end wrenches.

492
Gearwrench SAE ratcheting wrench set from 5/16" to 11/16".

493
Four Craftsman wood chisels, largest is 1" wide. Nice set.

494
Mack, KD, Napa, and other open and box end wrenches up to 1".

495
Craftsman almost complete SAE set up to 15/16".

496
Three pop rivet guns, and several containers of rivets, and washers.

497
Craftsman metric box and open end wrenches from 9mm to 19mm.

498
Stanley 1/4" and 3/8" sockets, deep and shallow, metric, and SAE. The set comes with two ratchets, a nut driver, and is mostly complete.

499
Genesis 9" band saw. The saw is in near new condition, still has the table sticker, good fully adjustable blade guides, a fence and miter gauge. The saw stands 29" tall, and runs smoothly.

500
Stihl AK 20 battery and charger for your Stihl mower, trimmer, chainsaw, or other Stihl electric power tools.

501
DeWalt 20 volt variable speed reciprocating saw, is model DCS381. Runs but does come with battery or charger.

502
Ryobi 10" adjustable speed bench top drill press, has work light and laser guide system. The drill press runs, is model DP102L, missing key, and laser system is not functional, probably the switch as it is hard to turn.

504
Five gallon gas tote with some gas, will ship without gas.

505
Campbell Hausfeld 11 gallon 4 HP aircompressor, runs and builds pressure.

506
Pair of rims by MB Wheels. They have a 5 x 4.5" bolt pattern, are marked 16 x 7, SR386 ET38, Vision 58M.

507
Harris carry-along torch set. Unit shows little use with torch handle still have the UL sticker and gauges still having the peel off vinyl shipping covers. Tanks are owned and partially full. Will ship empty.

508
Stihl electric chainsaw, is model MSA 120C, in very good condition, runs well, comes with a battery, and charger. The saw has a 10" bar, good chain, the battery is model AK 30, nice saw.

509
Black and Decker Workmate 400 folding contractor work bench vise. The table measures 29" x 24" x 31" tall as pictured.

510
Craftsman 3 HP contractor grade 10" compound miter saw, runs.

511
Herter's padded folding shooting stand. The stand is in very good condition, stands 38" tall when up, great for range days.

512
Ace wheelbarrow, has a 38" long metal bed, a good tire, and weathered but solid handles.

513
Craftsman 3/8" ID air hose, approx 50' long. nice hose.

514
Briggs and Stratton 15 gallon air compressor. The compressor is in good condition, runs, and stands 40" tall.

515
5-1/2' tall bandsaw, has a 10" throte, and a 6" tall max capacity. The saw runs, has a smooth motor, and comes with a fine and aggressive tooth blade.

516
Blackstone 28" propane griddle.The griddle measures 44" x 21" x 33" tall, shows little use, the lighter switch needs replacement or repair but otherwise in good condition.

517
Schwinn red waggon, measures 36" x 17", has an adjustable handle, and front and rear steering. and would be great for yard work or for the kids.

518
New Little Giant Xtreme extendable ladder, comes with paint tray bracket kit, more. The ladder is model 17, has wheels, leveler feet, nice ladder.

519
Delta 2200 PSI pressure washer with a 4.5 HP Honda engine, model GCV 135. The pressure washer comes with a wand, hose, and attachments.

520
Approd 40' or 12-2 with ground copper under ground feeder wire, and a new 5' spool of 14-2 copper wire with ground.

521
Black Jack 12 ton hydraulic bottle jack with case and handle.

522
Kobalt and Power Torque adjustable jack stands, each approx 11" collapsed.

523
Two spools of 14-2 with ground copper wire, and appox a 30' spool of 14-3 with ground copper wire.

525
Mr. Heater portable buddy heater, has a 20 pound propane tank hook up, is in good condition, and measures 13" tall.

526
Stihl hedge trimmer, is model HS 45, has a 20" bar, the tank is dry but turns over and has good compression, and is in good condition.

527
Two air hoses incl. 1/2" and 3/8", the longer read one has a 300 PSI max and is approx 45' long.

528
Fein Multi Master vibrating power tool, is model FMM25Q, appears to be in near new condition still with the power cord ties, runs and sounds like it means business. The multi tool has a quick tool-less bit schange, has several sanding and cutting bits, nice machine.

529
NIB Pittsburgh 1.5 ton aluminum low profile rolling floor jack. The jack has the rapid pump function.

530
Prime 100 FT 12 gauge extreme weather extension cord. The cord has light ends, and is NIP.

531
Igloo Island Breeze 48 QT family cooler. The cooler is in good condition, and measures 24" x 14" x 15" tall.

532
Job Smart 5 gallon 125 PSI portable air tank.

533
10 gauge extension cord with light ends, a 12 gauge extension cord, and a few others incl. a 6 outlet power strip.

534
Three Big Red 2 ton jack stands. The jack stands are in good condition, have a double locking system, and stand 11" tall collapsed.

535
Ridgid heavy duty 24" pipe wrench, has good jaws, and is straight.

536
Two adjustable bar clamps, each approx 28" long overall.

537
New 250' spool of Southwire 12-2 with ground copper wire.

538
Craftsman 20" lochable tool box with three drawers. The cabinet is straight and in good condition.

539
Little Giant 24" animal live trap.

540
Just over 2 quarts of Power steering fluid, and 1.5 quarts of Kubota UDT2 universal transmission hydraulic fluid.

541
Peak antifreeze and coolant, the green gallon jug is sealed, the other 50/50 mix is open but mostly full.

542
Master Electrician 50' extension cord with light ends, and a Yellow Jacket extension cord.

543
Approx 3 quarts of premium universal tractor fluid.

544
10' long length of 5/16" chain with two grab hooks, no rapairs noted.

545
Almost 4 quarts of 5W-20 oil, and about a quart of 5W-30.

546
Craftsman pneumatic set, appears to be new or near new. The kit includes 1/2" impact wrench, 3/8" ratcheting wrench, an air hammer, new hose, papers, and more. Nice set, comes in a 15" x 12" case.

547
Flex seal liquid and spray, WD-40, Minwax spray, more. NO SHIPPING.

548
Power Service injection cleaner - power improver, 50-1 and 40-1 ready to use 2 stroke gas, Armor All car wash, more. NO SHIPPING.

549
20 ton and 5 ton hydraulic bottle jacks, larger measures 10" tall.

550
Power strips, work lights, extension cords, more.

551
Automotive supplies incl. oil filter wrench, jumper cables, exhaust clamps, more.

552
Campbell Hausfeld air hose, approx 50' long, and has good fittings.

553
Comfort Zone floor fan, stands 24" tall and all three speeds work.

554
Two smaller cross peen hammers, and an apolstery tack hammer. The larger tack hammer measures 11" long.

555
Bostitch 1/2" drill / driver. The drill runs well, comes with two batteries, a charger, and is model BTC400.

556
Four Coleman all purpose propane one pound cylinders.

557
Union Butterfield drilling and tapping fluid, both containers are less than half full.

558
Vaper 30 oz. reusable sprayer, has a max pressure of 200 PSI, has something in it but will clean up nicely.

559
LEM electric meat grinder is model 1158, has a #8 head, has three attachments, and runs.

560
Two Klein Tools wire strippers, up to 16 gauge, and down to 28 gauge.

561
Rapala filet knife with sheath, Matco Tools folding pocket knife with a blade spring, a NRA folding knife, more.

562
Two speed squares, larger is 12".

563
Hobart .030 gasless flux cored wire feed welding wire, is E71T-11, one two pound spool, and one sample spool, both are unopened.

564
Stanley controll grip adjustable pliers, are models 84-024, and 84-034, larger measures 10" long.

565
Drill Doctor model 350X drill sharpener, comes with bit holder, papers, and runs.

566
Two pairs of B&G mittens, both are size large and new.

567
NIP Extidable telascop, measures 15" long extended, and comes in a carry case

568
NIP Extidable telascop, measures 15" long extended, and comes in a carry case

569
NIB Vaper 30 oz. reusable sprayer, has a max pressure of 200 PSI.

570
DieHard 6 and 12 volt battery charger & maintainer, is in good condition.

571
Chicago Electric auto tint welding helmet with adjustable delay, darkness, and sensitivity. The helmet comes in its original box and appears to be unused.

572
Husqvarna and stihl chainsaw bar covers, incl. 16" and 17".

573
Ace instant on propane torch, works. Will ship without propane.

574
Two NIP spools of Stringliner mason line, both has a 165 pound test, and 540 feet.

575
Evercraft 6" dual action pneumatic sander. The sander is in good condition.

576
Router with a 22,000 max rpm, 1/4" chuck, runs well, is model 7610, the only name on it is on Black and Decker on the cord.

577
Master Electrician 25 foot 12 gauge extension cord with light ends.

578
Ozark trail camping set incl. a single burner stove, and a 3 piece cookware set.

580
Two Curt trailer balls, the NIP one is 2", the other is 1-7/8", both has 3/4" shank, nuts, nad washers.

581
Craftsman 19.2 volt 5-1/2" circular saw. The saw runs, and comes with a new DeWalt 5-3/8" carbide blade.

582
Tack Force 6" bench grinder, has worklight, and very good bearings, and runs.

583
Craftsman 19.2 volt saw kit incl. 5-1/2" circular saw, reciprocating saw, and a larger 19.2 volt battery. Both tools run.

584
Dremel Saw-max SM20 rotary saw, is currently set up with what looks like a tile blade. The saw runs, and is in good used condition.

585
Drill press vice with 2-1/2" jaws, and a 2-3/8" opening.

586
Caldwell shooting supplies lead sled 3 shooting bench. The shooting rest is in good condition, and measures 27" long.

587
Set of metric Stanley box and open end wrenches from 7mm to 17mm.

588
Craftsman 19.2 volt drill, driver, and light set. The set comes with a drill, impact driver, a light, and two Lithium Ion batteries. All tools run.

589
Power Torque 1/2" drive 20 volt impact driver. The driver comes with a battery, charger, papers, and hard case. Nice tool, runs.

590
Skil 18 volt drill. The drill is in good condition, comes with a battery, charger, and runs.

591
Soft blow hammer, rubber mallet, ball peen hammer, more. Largest is 12" long.

592
Stihl power tool battery, is model AK20, has a 2.8 amp hour, and is 36 volt. Comes with charger, 17" long Stihl chainsew bar cover, more.

593
DeWalt DCS393 6-1/2" cordless circular saw. The saw is in good condition, is currently set up with a DeWalt fast wood construction blade, runs but dose not come with a battery. Comes with a 15" tool bag.

594
Black and Decker 7-1/4" circular saw. The saw is in good condition, and runs.

595
DeWalt 20 volt 3/8" right angle drill driver, and a LED 20 volt work light. The tools come with a charger a battery, and both run.

596
Klein Tools wire strippers, a 30 watt solder iron, solder, flux, triler light connectors, more.

597
Craftsman screwdrivers, Mayers square, Fiskars clippers, more.

598
Mostly Stanley sockets with 1/4" and 3/8" drives. Also comes with a partial kit of metric sockets.

599
Craftsman air hammer or air chisel, is model 875.191192, is in good condition, and comes with four chisels.

600
Stanley pliers incl. needle nose pliers, side cutters, and slip joint pliers.

601
Black and Decker 4-1/2" angle grinder. The grinder runs, and is missing guard.

602
Napa, Stanley, and other 1/4", 3/8", and 1/2" drive sockets.

603
Three Stanley 3/8" ratchets, and a Stanley 1/4" ratchet. Also comes with a set of SAE and a set of metrick hex drivers.

604
DeWalt, and Bauer 7" grinder and saw metal cut off wheels. Two saw blades, and five other wheels including a huge flap disc.

605
Stanley stud finder, ball peen hammer, wrenches, and a 24" prybar.

606
Grip air spray paint gun. The paint gun appears to be new or very little use, has a 1 quart cup, nice piece.

607
DuraMax rotary tool. The tool shows very little use, has adjustable speed, comes with all sorts of bits, and a cary case.

608
T handle and other hex wrenches incl. metric, and SAE, Titan, and others.

609
Several pairs of Vice-Grips, and other locking pliers up to 9" long.

610
Large hex wrench set up to 5/8", set appears to be mostly complete.

611
Headlight and other head lamps, lanterns, and a pair of knee pads.

612
Five Irwin C clamps up to 6" and down to 2".

613
Several pairs of C clamps incl. 6", 4", and 2".

614
GB and other cable ties or zip ties up to almost 15" long.

615
Grease fittings, automotive stethoscope, ctooer pins, adjustable oil filter wrench, more.

616
Welding and brazing supplies incl. Forney Fluxed bronze 3/32" rods, 6013 by 1/16" welding rods, Hobart .030 mig wire, more.

617
Cummins 24" metric and inch Varnnier caliper, and a smaller 4" caliper.

618
Craftsman 1/4" socket set incl. 6 point deep and shallow sockets.

619
Stihl chainsaw files, felling wedges, and Oregon files. The Stihl files are from 1/8" to 3/16".

620
Crecent and other adjustable wrenches up to 12" long.

621
Spade bits by Speedbore and others up to 1-1/2".

622
Craftsman Nextec vibrating multi tool. The tool runs, comes with a battery, charger, attachments, cary case, and charger.

623
Stanley tools up to approx 10-1/2" long incl slip joint, needle nose, adjustable wrenches; 16' tape measure; 7-1/4" pry bar, more.

624
6", 7", 8" sanding discs incl Ace, Master Pro, 3M, etc. Stick-on and other.

625
Tech 5000P vehicle jump starter / power bank / air pump with tips and cord to connect pack and pump. Power bank turns on, and has a 44.4 Wh battery capacity iwth LED flashlight. Made by SmarTech Products. Red piece about 9-1/2" tall with max 150 psi, runs. Peak current 500A (jump start).

626
Reese TwoPower Farm & Ranch trailer hitch with 1-7/8" drop ball and 2" raised ball. Fits 2" receiver. About 14" long, incl hitch pin.

627
Two new pairs of B&G split cowhide mittens, each size Large.

628
Crescent sheet metal shears, wooden Lufkin extension rule, Swingline heavy duty tacker, NIP metric hex wrenches, utility knives, more.

629
NIB Warrior 7" variable speed polisher / sander comes with two 1-1/2" thick sponge pads and more covers or bonnets. Warrior is 10amp, nice machine.

630
DeWalt, National, other drill bits, many HSS. Incl Craftsman drill case. Incl some intracate bits. Larger ones incl DeWalt 1/2".

631
Reese Tri Ball hitch with 2-5/16", 2", and 1-7/8" balls with a black nickel rust resistant finish.

632
Heavy duty Auto-Loading Cornwell Tools utility knife, Lufkin Ni-Clad steel tape measure, Bernzomatic torch head, GB wire strippers, needle nose pliers, 12' Stanley Powerlock tape measure, more.

633
Craftsman 1/2" pneumatic impact wrench is Model 875.168820. F / R, about 9" tall overall, in nice condition.

634
Two pairs of Stihl and Husqvarna felling wedges, three chainsaw files, more.

635
NIP. Progrip 27 foot long 10,000 pound ratchet straps with 2" straps, and a reversible function.

636
ITT cross pein hammer with a 15" fiberglass handle with a little play.

637
Stanley pliers and nippers up to 8-1/2"; plus a Stanley Power Lock 12' tape measure in good condition.

638
Needle nose pliers, side cutters, slip joint pliers, more.

639
Two Stanley heavy duty staplers, both work and come with several racks of staples.

640
Stihl and other trimmer line incl. .155" diameter twisted line, .105" diameter twisted, and others.

641
Near new Craftsman 1/2" pneumatic impact wrench is model 875.168820, has 3 forward settings, and is in very good condition.

642
Two brushblades for your weed eater, brush saw or similar. One blade has a 1" arbor, and the other is 3/4".

643
18" pipe wrench with great jaws, and a non-slip handle.

644
3/8" and 1/2" drive ratchets, and braker bars up to 17" long

645
Craftsman 3/8" drive pneumatic ratchet wrench. The ratchet is in good condition, and measures 12" overall.

646
Craftsman matric and SAE open and box end wrenches up to 13/16" and 18mm.

647
Makita 4-1/2" angle grinder, runs, and is model GA4530.

648
Craftsman commercial power plane, runs well, has papers, comes with extra blades, fences, more.

649
Lincoln 18 volt greese gun, is model 1800 power luber series B. The gun runs on low and high, and comes with a charger.

650
DeWalt 20 volt drill driver set incl. drill model DCD780, impact driver model DCF885, charger, battery, and bag. Both tools run well.

651
Esteing hatchet with a classick stacked leather handle. Hatchet measures 13" tall, and has a blade cover.

652
Black and Decker, Craftsman, DeWalt, and other 7-1/4" circular saw blades, new and used.

653
Penske timing light, overall good condition, the spark lead has seen the hot side of an exhaust manifold, but otherwise nice gun.

654
Coleman pripane lantern. The lantern stands 16" tall, and has a partial tank of propane. Will ship without propane.

655
Engineers hammer or mini sledge hammer, has a 16" handle with minimal play, great for forging.

656
Stanley tools incl. 25' tape, speed square, pick set, pry bar, more.

657
Stanley 1/4" socket set incl. metrick and SAE, two ratchets, nut driver, more.

658
ITT, Buck Bros, and other claw and rubber mallets, and hammers.

659
AIr compressor fittings incl. tire inflation, bloers, male and female fittings, more.

660
Craftsman SAE and metrick mini open and box end wrench set incl. 5mm to 9mm, and 3/16" to 7/16".

661
Diablo, 3M, and other adheaive and velcrow backed sanding dicks and sanding nets, most are 6".

662
Hack saw, hammer, face shield, pry bar, more.

663
Stanley heavy duty stapler, works, and three partial containers of staples.

664
Pruning saws, ribbed saws, and others, longest measrues 16".

665
Irwin bit driver, 6 and 12 inch extensions, and several bits.

666
Rotary tool bit kits incl. grinding wheels, cut off wheels, buffing wheels, diamond cutters, more.

667
Ratchet straps, and bungee cords, great for fastening your auction winnings.

668
Black and Decker 1/4 sheet palm sander, is model FS540, and runs.

669
Craftsman and other speed squares for your small and big projects. Larger square is 12" x 12".

670
Two Black and Decker drill / drivers, both run forward and reverse, one battery is very strong, the other dosen't charge. and come with two chargers.

671
Black and Decker heat gun, and a hand held blower. Both run, and heat gun heats.

672
Larin 4" swiveling bench vise. The vise has double swivel locks, good jaws, and is in good shape.

673
DeWalt DCG414 brushless angle grinder, runs both 4-1/2" or 6" disks. The grinder is in very good condition, has two quick adjust guard, a 60 vlot Flex Volt battery, charger, manual, and bag. Couldn't get the battery to take a charge, bring your battery to open house to test.

674
Pair of perfectly pink glass platters, larger measures 13-1/2" across. Smaller measures 12-1/2" across the handles.

675
Perfectly Pink glass fruit bowl and cookie plate to use for Easter this year! No chips noted. Bowl measures approx 12" across.

676
Free Range brand 5 gallon double wall poultry drinker stands approx 17" over handle.

677
Lid for a galvanized boiler and pieces parts of a meat grinder and 17" sharpening rod.

678
3-1/2 ft bow saw in good condition.

679
Adjustable single-handle hand truck folds up to a compact 3 ft. Manufactured by S&H Industries

680
Mercury Marine 6 gallon gas tote. Graphic is in fair condition.

681
Mercury Marine 6 gallon gas tote. Graphic is hard to read.

682
Medium animal live trap measures 29" long.

683
Red and White brand portable air tank. Measures approx 24" long

684
Metal tool box with locking clasps. One clasp is broken. Box measures 17" x 7-1/2"

685
Jiffy Fidmann ice auger with a 9" cut, and a Tecumseh engine. The auger turns over and has good compression but tank is nearly dry, has good blades, and a blade cover.

686
A trio of simple gun racks when all you need is a place to hang your rifle or shotgun. Largest measures 3-1/2" long.

687
Olive green wooden box with hinged lid measures 32" long x 16" wide x 13" tall. Some of the metal strapping needs to be replaced.

688
General Electric brand outdoor yard light. This is a biiiiiiig one! Measures approx 12" across the top.

689
Rusted metal bucket with chain and binder. Bucket stands 12" tall.

690
Reddy Heater 35 brand heater, 35,000 BTU, 3 gallon fuel tank, measures approx 30" long.

691
Pair of heavy duty black plastic storage totes, only one lid. Totes measure 28" x 19" x 15" tall

692
Wooden tool chest measures approx 35" x 16" x 13" tall. Lock removed. Removable tray inside with additional fixed state compartments.

693
Husky brand heavy duty plastic tool box or storage for the bed of the truck. This is a gem of a toolbox with wheels and a self-storing handle and hinged top pieces. In its most compact size it measures 25" x 16" x 15"

694
Weatherproof army green colored backpacking dry bag. Measures approx 24" x 15" x 8" deep. Multiple layers of closures, feels mostly waterproof.

695
Rodent deterrent plastic falcon to keep the yard and shed free from the peskies. Currently on some wood for quick application to the shed or garage. Falcon measures approx 13-1/2" tall. Wood adds additional 8"

696
Tipton brand "Best Gun Vise" to use as an extra set of hands for gun disassembly, gun cleaning, gun modifications, etc. Appears to be new in box.

697
Set of 4 Polar ice fishing tip ups to use while risking your life on the thin ice out there. Each measures approx 18" overall.

698
Green five gallon bucket with a trio of Polar Tip ups for what remains of ice fishing season. Tip ups measures approx 18" overall

699
A Pair of tackle boxes incl Plano 6300 filled with bait and lures and a brown metal tackle box just like Uncle had when you went fishing together. Plano tackle box measures approx 16" x 7" x 8"

700
Ultimate brand portable speaker or light three legged stand. Adjusts to different heights up to 6 foot 6 inches tall.

701
Pair of hard back gun cases. Longer measures 4 ft long and has one latch that can be tough to latch correctly; smaller is 3-1/2 ft long.

702
Coleman Powermate portable air tank, model no CL0551109, measures approx 38" overall.

703
Char Griller Professional Patio Pro griller and smoker, model no 1515, appears to be unused in box so some assembly required. Made of heavy steel. Just in time for spring and summer porch grilling and smoking!

704
Team Hornady bag with plenty of pockets for your stuff. Could be used as luggage for clothing or as an accessory bag for all your pew pews. Plethora of storage options incl the outer pockets and a velcro panel for interior of the bag to accommodate just about any contents.

705
Navy blue and gray camping tent, appears to be a 2-man tent. Incl folding tent poles and ground stakes.

706
Intricately carved walking cane and a small Old School Sports souvenir basbeall bat. Bat is 18" long. Cane measures 3 ft tall.

707
Five panels of camouflage burlap to wrap your hunting stand or create a hidden ground blind all contained in a rugged Rubbermaid Action Packer covered tote. Tote measures approx 27" x 18" x 12" and can be padlocked on both ends.

708
Set of four ammo cans measure approx 11" x 7" x 4"

709
Trio of military style ammo cans. Largest inside measurements are 5.8" x 11" x 7.2"

710
Ace Hardware grass whip measures approx 3ft long, small 16" bow saw, 10" tall oil can. All functional and ready to be used.

711
Homelite Texron Super 2 chainsaw with a 14" bar. The saw turns over and has good compression, tank is bone dry. Nice saw, comes with case.

712
Homelite Texron Super 2 chainsaw with a 16" bar. The saw turns over and has stout compression, tank is dry. Nice saw, comes with case.

713
Super Power model 540000, generator, runs 750 Watts, 6 Amps, Phase 1. Measures approx 18" long, and has a Kawasaki gas engine that turns over and has good compression but tank is dry.

714
Seven jointed and unjointed fishing lures, Rapala and other.

715
Ammunition brass and nickel coated cases incl. almost 100 pieces of .44 Remington Magnum, Somewhere around 100 pieces of .357 Magnum by Remington and others.

716
Plano over and under tackle box full of soft baits, sinkers, hooks, and weights.

717
Fishing season is coming, get it now before the stores raise the price! Stren, DuPont, Berkley fishing line in varying weights, hooks, sinkers, lures, scaler, more.

718
A few Heddon River Runt Spook Sinker, Jitterbug, other vintage woodel fishing lures and bobers. Some lures have glass eyes.

719
Vism Flasklight+ with integrated KeyMod mount. Flashight works, other parts untested. 4" long, comes with packaging.

720
Antique powder horn, cast iron scale, and a vintage giroscope. Powder horn is about 5" long and sratched on the side reads 1864 A.H. Pittsley, nice piece. Scale about 5" across base and isncl 3/4 of weights.

721
Snap Safe with keys could be mounted in your vehicle, closet, etc using the four holes on back made for that purpose. Padded nicely for a pistol or similar. Opens a little hard but definitely doable. Measures about 8-1/2" x 11-3/4" OD.

722
Plano 787 tackle box, a smaller12 box, and a 9-1/2" boat prop with a 3/4" splined hub. The boxes have some bobers, baits, lurs etc.

723
Will ship to qualifying state. Sixty round P-Mag D-60 rifle magazine fits AR15, M16, M4, HK 416, FN Scar, MK 16/16S, SA-80, M27. Comes with box, manual, sticker, cleaner. Can seat fully on a closed bolt.

724
Bulldog Vaults lock box with keys measures about 11-3/4" x 10" x 2-1/2" overall. Great for a handgun or similar. Incl two keys. Mechanical lock may just need batteries, as the buttons do not light up. Or, just use the keys.

725
Four open spinning reels by Quantum, Shakespeare, and others. All spin smoothly.

726
11 Reel Bait Bullet lures. Each is approx 3-3/4" long, and are NIP.

727
Aladdin Stanley lunchbos and thermos set. Thermos is quart size and stands about 14-1/2" tall; incl stopper and cup. Small dent noted on bottom. Cooler in good condition and measures about 14" x 8-1/2" x 7-1/2" overall.

728
Compact lock box with keys is ready to mount in your truck or nightstand. Two holes on back for that very purpose. Measures 6" x 8-1/4" and is in good condition with nice foam padding.

729
1953 Japy mess kit may be French Army, look it up and see for yourself. Measures about 5" x 7" over largest piece.

730
Aker right handed indide the waistband leahter revolver holster is about 5-1/2" tall and 6" wide. Model 140, also marked J-2.

731
Vintage wooden Blatz Beer crate is about 16" x 10-1/2" x 9-1/2" tall. Reads Milwaukee Wis. Decent graphics on inside of box, outer ones a little lighter.

732
NIP Boating Essentials Offshore 70 bracket mount marine compass.

733
Three sizes of Chicago Cutlery knives, perfect for home processing deer or beef. Longest about 15" overall. Knives are numbered 66S, 44S, other. Quality knives worth the investment.

734
Two Safariland Nylok pistol holsters 30-95 4051-383 and 28-95 4052-76. Larger about 8" x 6" over body, other about 8-1/2" x 4-3/4". Look them up to see if they fit your pistol.

735
Actron Auto Scanner Plus vehicle code reader for OBDII vehicles. Model CP9180 and comes with case, cord, and manual.

736
US Military leather pistol holster with suppressor and magazine pouches. Looks like it may be for a Walther P-22 or similar. Measures about 5-1/2" x 7-1/2" overall and has ties to secure to the leg. Nice holster.

737
Fobus Smith & Wesson paddle holster reads .357 and 2.5". Comes with packaging. Sticker on front reads All J-Frame .38, .357, Rossi 88.

738
Safariland belt handgun holster is numbered 19-01 and 4050-01. Measures about 7" wide overall and is about 4" over tallest body part. Look it up to see if it fits your pistol.

739
Safariland Nylok handgun holster is numbered 28-95 and 4052-76. Measures about 8" wide overall and is about 6" over tallest body part. Look it up to see if it fits your pistol.

740
Safariland Nylok handgun holster is numbered 30-95 and 4051-383 and comes with Thumb Break Hammer Strap Adjustment Key. Measures about 8-1/2" wide overall and is about 4-1/2" over tallest body part. Look it up to see if it fits your pistol.

741
Antique cast iron Enterprise fruit or lard press / sausage stuffer was patented April 10 1883. Handle and gears turn smoothly. Stands about 17" over top curve. Outfitted with a No. 25 Small Plate. Incl sieve in bottom. In good condition, would make a neat lamp base.

742
Uncle Mikes No. 5 Sidekick right handed holster is mounted on an adjustable Uncle Mikes shoulder strap. In good condition. Look it up to see if it fits your pistol.

743
Nice magazine holster is belt mountable horizontally or vertically. Measures about 4-1/4" x 5-3/4" with pouches about 1-1/4" x 3/4" x 3" inside, a mag about 4-1/2" tall would fit. In good condition.

744
Sig Sauer black open top concealment holster is 4-3/8" x 2-3/4" overall.

745
The Geogre Lawrence leather pistol holster is marked 24 and 570, look it up to see if it fits your gun. Measures 5-1/4" long and about 3-1/4" over widest part.

746
Safariland paddle holster is Model 568-01. Stamped S&W J 13 12. Paddle measures 6" x 5-1/4" tall. Holster about 4-3/4" tall. In good ocndition, incl wrench and Users Guide. Look it up to see if it fits your handgun.

747
Two canvas packs mmay be military. Plus what looks like an AK-47 or AK-74 cleaning kit about 3-3/4" long. One pack marked C.T.C. on top leather strap.

748
Handcrafted Barsony Leather shoulder holster. Holster itself about 8" x 3-7/8" overall OD. Adjustable straps about 1". In good condition.

749
Galco Gunleather underwrap belly band for concealed carry. Band about 4" wide and size XL 48-52. In great condition, incl packaging and papers. No. I129L.

750
Advanced Technology Fiber forestock fits AK-47, MAK-90, MAADI and other variants. CAA Israeli pistol grip, more.

751
German made Akah leather pistol / handgun holster is well constructed. Measures 6-1/2" down barrel side of leather. Frog marked Akah 2-96, near bottom of holster Akah 2-96 is marked. Looks like it's a German Military or Police holster. About 11-1/2" overall. Right handed. Look it up to see if it fits your gun.

752
Uncle Mikes double magazine paddle holster and a Safariliand right handed belt mount pistol holster about 5-5/8" tall and 3-7/8" wide overall. Paddle about 4-3/8" x 5", magazine slots 9/16" x 1-7/16" x 2-13/16" ID.

753
Bulldog Deluxe Black Mini Range bag is Model BD-917. Looks like new and measures 13" x 9" x 3".

754
Blue Stone Safety Products concealed carry ankle holster with packaging. Band about 4" tall. In good condition. Bag tag reads Ruger W/D-Ring A314D.

755
Pistol holster with magazine pouch has velcro side to store on the inside of your gun safe and save space. Measures about 7-1/2" tall and 3-3/4" wide OD not measuring clip pouch.

756
Keg spout is about 19" overall. Pump pushes air, looks to be in good condition.

757
Discharged grenade is marked RFX on side and stands about 4-1/2" tall. Top marked Fuze M228 MEI01J 018-013. Great display piece.

758
Bulldog Extreme ankle holster with packaging is Size 3 and fits most compact automatic pistols / handguns with 2-1/2" - 3-3/4" barrels (Taurus Millenium, S&W M&P Compact, 1911 Compact, etc).

759
Blackhawk Serpa Strike CQC Platform holster side is about 5-3/4" x 4-3/8" tall and in good condition. Designed to fit any Blackhawk T-Series�, Serpa� or Omnivore� holster at any angle. Incl three screws.

760
Tagua Gunleather posket holster for a Smith & Wesson Bodyguard 380 with laser or similar. Ambidextrous, neat holster in good condition. Measures 5-1/4" x 3-1/4" x 1".

761
Blackhawk CQC C1379 Serpa shoulder harness is size Large, Right Handed. In good condition.

762
Boker Magnum, Abu Garcia, Mossberg, other folding knives; plus a vintage 2-1/2" Bull padlock. Boker blade is tight and locks open, measures about 5-3/4" closed. Other two lock-back blade's also tight. Abu fishing multitool is about 2-1/2" long closed, perfect for the tackle box.

763
BK & Ka-Bar No. BK23 fixed blade knife with sheath, CRKT Ikoma Keydashi rounded knife with 2" blade and sheath, other fixed blade knife, two knives up to 12-1/4" overall ready to customize with handle slabs. Black knife about 6-3/4" overall.

764
Taigear holster set-up is about 12" x 6-1/2" over backing pad. Pistol holster is 7-1/2" tall and about 4-1/2" OD not measuring the magazine pocket. Other pocket for extra ammo about 5" tall. Great set up. Google to see if it fits your gun.

765
Seller notes this is an SKS Paratrooper spike bayonet; plus an SKS oiler or similar and a cleaning kit. Spike baynet is about 11" long, screw included. Oiler about 3" tall and in good condition. Cleaning kit looks unmarked.

766
UpLula 9mm-.45ACP pisotl mag loader / unloader with packaging.

767
Two Glock 21 and 41 magaazines are .45 ACP, 13 +1 round.

768
Four position pistol buttstock is 14-1/2" extended.

769
Foreign wooden baton with custom made Ray Sullivan leather holster in good condition. Baton about 2' overall.

770
Large machete with matching sheath was made in El Salvadore. Measures about 28" overall.

771
Awesome 81mm cartridge case is 22-1/2" tall. Side reads Smoke WP M375 W/ Fuze M524A5 For Mortars M1 and M29.

772
SKS bayonet, SKS muzzle brake, SKS or AK butt stock and cleaning kit. Cleaning rods, more.

773
Two Glock 21 and 41 magaazines are .45 ACP, 13 +1 round.

774
Military poeces and other incl double pack about 10" tall marked 1984 and more, belt with suspenders, other pack, ankle wrap, more.

775
Combat exchange all-weather synthetic rifle stock is 29.25" long.

776
Advanced Technology synthetic adjustable rifle stock appears to be for SKS or similar and measures 31" overall.

777
Two sings incl Mossberg and Hippies Use Side Door. Measure about 24" x 15" and 12" x 15".

778
Victorinox, Dexter Russell, Cozzini, other filleting and butchering knives up to 14".

779
Antique hand painted salt and pepper shaker set, sugar, other S & P, rosebud pieces about 3-1/4", much more.

780
Two cute teapots and a chocolate pot made in Austria. Two teapots are both in overall good condition with jstu some small chipping noted on spouts, pink one hand painted. Chocolate pot about 10" over lid. Pot could be a neat decoration up on a shelf. A few small ships noted on rim and spout, and lid has been repaired, see pics.

781
Antique handpainted covered pot, cream pitcher made in Germany; other pieces made in Bavaria, Japan, etc. Larger white dish 8" wide.

782
Large American flag may be a soldier's military funeral flag. Measures about 56" x 113". Good condition with just some discoloration or mildew noted that may just wash out. No holes or tears noted.

783
Caldwell Shooting Supplies rifle bipod clips onto front sling mount. Stands about 6" overall and extends to 9". Nice piece.

784
Two Western USA folding knives are Models S-531 and S-534. Brown handled one has trouble locking open, release button feels a little gummed up - may just need some oil. Measures about 7-1/2" open, blade is tight and so are fittings. Handle slabs good with one scratch noted but no cracks and a good fit. Black handled one locks open easily, bade with a little wiggle, handle slabs and fittings tight. Comes with leather Weastern belt pouch. Wipe them down, add a little oil, and enjoy these quality made knives.

785
Boker Model Bok608 specialty knife with sheath, plus Jaguar and other throwing knives with sheaths up to 6-3/4". Boker nearly 6-1/4" long.

786
Ka-Bar 1300 folding utinsel knife with belt pouch, great for the survival pack or camping. Knife locks open, all fairly tight, measures 3-3/4" closed.

787
Remington 12 gauge slug barrel is 20" and has adjustable rifle sights. Bore is bright.

788
Caldwell Shooting Supplies XLA rifle bipod is the 9" to 13" model. Spring loaded legs, detaches and attaches to gun using the swivel stud. Padded front. Comes with packaging.

789
Two Ruger Mark pistol magazines, one has a chrome bottom, the other has the Ruger insignia in the bottom.

790
Telescoping baton with belt clip extends to 16". In good condition, nice piece.

791
Communist rifle oil & solvent bottles, one with Chinese characters.

792
Havalon Knives set incl 5-1/4" long handle and four blades up to 6" overall; great for the hunting pack. In nice condition, comes with carry case.

793
Smith & Wesson Bullseye hunting knife set with belt sheath. Knives incl 6-1/2", 9-1/4", and 11" overall. Great set.

794
Glock No. 78 tactical or field knife with hard plastic sheath. Made in Austria, measures 11-7/16" long overall.

795
Large survival knife with storage space in handle for matches and a small compass (compass included). Comes with belt sheath or case. Knife measures 14" overall.

796
G4 Falcon extendable spear style knife is marked Renegade Tactical Steel. Extends from about 13-3/4 to 17-7/8" long. Comes with sheath.

797
Polytech 30 round AK-47 magazine, measures 9" long, appears unused and is marked Poly China.

798
Polytech 30 round AK-47 magazine, measures 9" long, is in good condition, shows some use, and is marked Poly China.

799
SKS detachable magazine, measures 9-1/4" long, and appears unused.

800
U.S.A. Magazines SKS detachable magazine, measures 10" long, and shows little use.

801
SKS detachable magazine, measures 10-1/8" long

802
AK-47 magazine, measures 10-7/8" long, shows use but is in good condition. 40 round?

803
Unissued AK-47 magazine, measures 11" long, shows little use and is in good condition. 40 round?

804
Unissued AK-47 magazine, measures 11" long, shows use but is in good condition. 40 round?

805
Hand forged cleaver with nice custom leather belt sheath. Cleaver about 9-1/4" long.

806
Vortex Sparc red dot scope is for Speed Point Aiming in Rapid Combat, or perhaps helping to get your deer. Incl extension piece. Currently does not turn on but may just need new battery. Measures 3" long and would look stellar on your AR-15.

807
Vintage Western fixed blade sheath knife, most likely a Bird & Trout hunting knnife. Marked Boulder Colo., Made in USA, Patented. Measures about 6" long. Blade, fittings, leather handle rings all tight.

808
Pair of folding straight razors. Dark one hand crafted by Tom Anderson, other is a Timber Wolf. Eack locks open with no blade wiffle, and they feature liner locks. Measure about 4-1/2" and 5" overall closed.

809
Antique brass lapel compass was made in West Germany. Measures 1-1/4" wide and about 2-1/2" long.

810
Smith & Wesson H.R.T. front eject knife. Measures nearly 7-3/4" when opened. Glass breaker knob on other end. Blade is tight and springs out nicely. Lock works. Marked SWOTFB.

811
Tac-Force Speedster Model folding clip knife is an impressive 13" opened. Blade is tight, liner lock also tight. Clip rather loose, tighten up. Handles good.

812
Two Fury A three angle fixed blade knives, 9-1/4" Azan throwing knife, 5-1/2" keychain defense tool. All knives with sleeves. Fury pieces No. 60009 and measure 7".

813
Quality Grohmann DH Russell fixed blade knife with leather sheath. Knife looks new and is 10-1/4" long. Inscription on blade commemorates 20 years as an employee of Wausau Window & Wall Systems. Other side of blade reads Canada.

814
BK & Ka-Bar Model BK-16 Becker Short Drop Point fixed blade knife. A modestly sized field knife perfect for belt or pack carry. Includes a MOLLE compatible Cordura� sheath and an extra set of brown handles. BK16HNDL micarta handles will fit the BK16. Rockwell hardness 56-58. 20 degree edge angle. Made in USA. Measures about 9-1/8" long.

815
SOG Ace fixed blade stone finish outdoor knife with textured sheath and original packaging. Measures 8-3/4" long, nice knife.

816
Hundereds of pieces of brass incl mostly .30-30 Winchester, a handful of .44 Remington Mag, possibly other.

817
12" Glock Pistols sign and a Beware of Owner sign about 10-3/4" tall. Both in good condition.

818
USA made compact flashight and a Park lighter. Flashlight about 5-1/2" long, batteries not incl. Cracks noted on lens, neat display piece. Lighter wheel spins freely, about 2-1/4" tall.

819
DVDs incl The American West, Unlocking DaVinci's Code, Trans-Siberian Orchestra, Ben Franklin, Beyond The Law, more. Three cases I checked complete.

820
Mixology & Craft whiskey set incl to 3-3/4" glasses, pair of slate type coasters, chilling cubes, Whiskey Cards, more. Box 8-3/4" wide.

821
Pair of camo ammo cans are marked SCF. Seals are still soft, cans measure about 10" x 4" x 7".

822
NIP Harley Davisdon passing lamp moulding kit, Sun Pro Super Tach II, NIP Accel Performance spark plus wire set for Harley Davidson, 15" bracket for license plate or similar.

823
Rite Edge Forged Series Bill Hook machete with box is No. HS-4426. Measures 16-1/4" overall, nice handle slabs are tight. Incl sheath.

824
Awesome collection of animal skulls up to about 4-1/2" long. Incl bird and possibly squirrel.

825
Cast iron wall-mount match safe with lid is 7-1/4" long and in good condition.

826
Bushnell 7-21 power 40mm binoculars have Insta-Zoom and come with case. Binocs focus and are bright. Three lens covers incl. About 6" long and has tripod mount.

827
Antique Craftsman breast drill features two wooden handles and is 17-1/2" long. Turns easily.

828
Uncle Mike's Sidekick vertical shoulder holster is size 4 Scoped, holster about 15" long over top side of rim. Look it up to see if it fits your pistol. Right handed.

829
Gun rack for your pickup, and a utility hanger for SUV's and RV's. Each about 12" long.

830
Uncle Mike's Sidekick vertical shoulder holster is size 13 Scoped, holster about 18" long over top side of rim. Look it up to see if it fits your pistol. One black piece not marked Uncle Mikes. Right handed.

831
Two antique Fuller Brikarier mason's brick mover tools. Each about 16" long.

832
12" Glock Pistol sign and a NIP Glock Perfection 12" wide license plate.

833
Harley Davidson Motorcycles clip knife made by Zippo, Harley pins, Canadian dollar coins, more. Knife piece about 2-3/8" closed.

834
Harley Davidson Motorcycles Heritage Softail Franklin Mint Precision Pocket Watch with eagle stand and belt mount sheath. Watch has chain nearly 14" over end hook. Currently not running but may just need new battery. Official licensed product. Stand about 3-1/2" tall, watch about 2" wide. Another in lot 836.

835
Two sets Homak 8" parts organizers.

836
Harley Davidson Motorcycles Heritage Softail Franklin Mint Precision Pocket Watch with eagle stand. Watch has chain nearly 14" over end hook. Currently not running but may just need new battery. Official licensed product. Stand about 3-1/2" tall, watch about 2" wide. Another in lot 834.

837
2-1/4" wide military belt 30" long; other belts, straps, knife sheaths, dog collar, 5-1/2" carabiner, more.

838
Folding and tactical knife sheaths incl Gerber, more. Longest about 13-1/2".

839
Real Keen 11-1/4" cleaver and a smaller 6" cleaver. Handle slabs tight on each.

840
Belzig Knives Rostfrei fillet knife with sheath. Knife measures 12-1/8" long. Handle slabs are tight.

841
Heavy duty machete is 18" long with 11" blade. Wrapped handle for a more comfortable swing.

842
MTech USA folding clip knives have thumb studs for a quick open. Measure about 8" and 8-3/4" open. Smaller blade a little wiggly when open, other is tight. Nice knives.

843
Tactical sling for AR15 rifle or similar. Strap is 1-1/4" wide and in good condition, adjustable length.

844
BK & Ka-Bar Becker BK-2 Companion tactical fixed blade knife comes with hard sheath or scabbard, box, papers, sticker. Sturdy knife measures 10-3/4" long and is in nice condition. Box reads different Model No.

845
McNett tactical utility knife with hard sheath or scabbard, Fury folding knife with cleaver type blade, very long serated folding knife, 4-1/2" Elk Ridge concealment knife with sheath. McNett about 6-3/4" overall.

846
Two folding fillet knives incl Schrade Cutlery First Production Run with belt pouch, and Ridge Runner knife. Each have wooden handle slabs; lock back works. Blades with little wiggle. Handles nice. Measure about 12-1/2" and 13" long open.

847
Four animal skulls up to about 6" long. Seller notes red fox, porcupine, racoon, bobcat.

848
Boker Plus Besh wedge neck knife and a Cold Steel 'The Spike' fixed blade knife. Each with scabbard. Measure about 7-1/4" and 8-1/8" long. Blades and handles tight. One sheath Secure-Ex.

849
Black Panther No. 064 fixed blade knife with scabbard was made in Solingen Germany. Measures about 10-3/4" long overall. Knife with tight fittings, nice piece.

850
Buck Knives Paklite Fieldmaster kit incl larger 141 knife, smaller 135 knife, and a 499 guthook ring; plus nice 9" sheath with belt mount, removeable liners, and two zipper pockets for waterproof matches and other necessities. Longest knife about 8" long. Incl paper. Very nice set.

851
Two CRKT Folt's Minimalist concealment knives with scabbards. Knives each about 5-1/4" long and in good condition, Models 2387 and 2386.

852
We believe this is an Italian M1870 sword bayonet that was arsenal-shortened for later reissue. Blade is marked FG in an oval and on the barrel mount fitting 'G 8009'. Measures 14-3/8" long overall. Blade, fittings, handle slabs tight. Leather frog is soft and marked 6/73K.

853
Antique WWI Era Swiss Military bayonet is about 16-1/2" long. Blade reads Waffenfabrik Neuhausen, and barrel mount fitting is marked 275604. Blade, fittings, and handle slabs are tight. Button moves easily, not frozen in place. Neat piece of history.

854
Henry Rifle sign is 12" x 15-1/2" and in good condition.

855
Is this a German K98 bayonet for Mauser rifle or a Yugoslavian bayonet? Regardless, it comes with a nicer-than-most scabbard and frog. Serial numbers on bayonet and scabbard match. Blade reads Npeay3ere 44, presumably 1944 WWII manufacture. Barel mount piece marked 12134 on one side, with another marking on other side. Scabbard also marked with a matching 12134. Measures 14-3/4" long overall. Blade, fittings, wooden handle slabs are all tight. Button moves. Scabbard in good condition. This is a very nice piece, possibly unissued.

856
Police style telescoping baton is 16-3/4" opened and comes with Bianchi belt sheath. Closes to a compact 6-3/4".

857
Vintage Marble's No. 2 safety hatchet was made by Marble Arms & Mfg. Co. of Gladstone Mich. Head and handle slabs tight. Very shallow chip the size of a ball point pen tip on one top corner of handle slab, but no cracks noted. Head measures about 4" long and axe is nearly 11" long. Nice hatchet may clean up with a little steel wool.

858
Awesome Rapala fsih grabber / scale looks pretty heavy duty and is about 10-1/2" long.

859
Pair of MCM locking ammo boxes are stackable and measure about 13-1/2" x 9-1/4" x 4-3/4" ID. In good condition. Would also make great emergency boxes in the truck.

860
Two dual mag couplers or holders, will fit your FA-MAS, M16, AR-15, XM, AK-47, AK-74 and G3 mags.

861
Super cool tactical cane comes apart into five sections, three of which have knife blades. Top handle with glass breaker knob. Bottom pad also screws off to reveal small post. In great condition, about 38" long.

862
Chicago Cutlery and other knives come in a wooden Gerber knife block. Plus a 14-3/4" Chicago Cutlery knife sharpener. Longest knife is about 13-1/2". Also incl 'Gaucho' knives by Adcraft.

863
Wooden Canvasback duck decoy is ready to finish, incl eyes. Measures about 12" long and is in good condition;

864
Large Tasco 8-32x44 rifle scope is bright and clear. Measures 20" long. Incl lens covers, great for elk hunting out west.

865
Chicago Electric VS rotary tool comes witha variety of Dremel accessories incl sanding drums, cutting wheels, more. Incl case for tool and bits. Smels a bit like brushes, runs.

866
Four HDX organizer boxes have removeable trays and customizable compartments, great for fishing tackle or precision shop work. Largest about 11" x 9" x 2".

867
Neat collection of aminal skulls, Seller notes snowshoe rabbit, porcupine, skunk, etc. Longest about 4-3/4".

868
Several Chicago Cutlery knives, plus a few others in a nice knife block. CC bread knife about 12".

869
Awesome children's tool kit incl 11" saw, wrenches, hammer, screwdriver, more. Plus several wooden guns. Great kit to get the kids into the life skill of a handyman.

870
Antique knives and forks by the Atlantic Cutlery Co. have bone or antler handles. Knives about 9-3/4" long, forks about 7-1/2". Nice pieces.

871
Several pairs of warm winter socks feel like wool.

872
Nice Zwilling J.A. Henckels 7" butchering knife was made in Solingen Germany and is about 12-1/4" long overall. Numbered 31118. Quality knife.

873
Four Chicago Cutlery knives great for processing your own deer or beef. Longer ones about 13-1/2". Quality knives. Numbered 78S, 66S, etc.

874
Two military style canvas packs with leather closures measure about 9" x 7".

875
Three canvas bags, most or all military. Pair of ammo pouches (possibly British) each about 10" tall, roll about 17" x 17" when laid flat. Markings incl C.W.L 1988, 1986, Touch Ammo Left, RFDPP 1984, more.

876
No shipping. DuPont Ho-Skor 700-X smokless powder can partially full with contents. Weighs 5 lb, 5 oz.

877
Zaplight stun gun by Zap is Model ZAPLT. Comes with box, cord, manual, case. Flashlight and stun part both work. Measures about 6" long.

878
Neat leather bag would be great for taking to the range. Plus a wooden box about 22" long. Bag about 15" x 9" x 9", neat piece. Box smells strongly and could be cleaned out.

879
Husky tiered rolling tool box or similar is in nice condition and measures approx 14" x 25" x 16" tall. Lockable, handle extends, another in lot 880.

880
Husky tiered rolling tool box or similar is in nice condition and measures approx 14" x 25" x 16" tall. Lockable, handle extends, another in lot 879.

881
US Military trunk or locker was made by Economy Mfg Co. Measures about 32" x 16" x 13" high not measuring handles. Handy storage, US printed on outside with wording inside as well.

882
Greenheck wall or heater mount fan has a General Electric 1/4 hp motor. Comes with frame measuring 20" x 20". Runs.

883
ATV seat is about 36" x 18" x 12" tall overall. Storage compartments in arms and back, plus cupholders and more. In good condition.

884
Bushrag Camouflage Systems size XL / XXL ghillie suit. Sleeves with adjustable elastic closures, zipper works. In nice condition, lining is good with no tears or holes noted.

885
Penncraft brand lockable tool chest with loads of storage for all of your Bennett Auction tool winnings. Includes keys and measures 17-1/2" tall x 20" long x 8-1/2" wide

886
Assorted cane fishing poles appear to make 3 poles. Each section is about 4-1/2 ft long. Darkest pole is from Kmart.

887
Two pieces of camofalge cover nettting, grat for deer blinds etc.

888
Four Mossberg gun rifle holder rack for the back of your truck seat or similar. The racks measure 25" tall.

889
Storage case for US Military Night Vision Goggles, model no AN/PVS-7A. Marked US Property and MFG by 55311.

890
Two pairs of Mossberg long gun holders or racks for the back of your truck seat or similar. The racks measure 25" tall.

891
Two camo blankets, and three sleeping pads.

892
Legacy Quest Outdoors wooden framed prints of a flag and portion of the 2nd amendment. Appears to be an NRA sponsor gift with 14 smaller US flags on sticks. Frames measure approx 17-1/4" x 13-1/2"

893
Wooden crate marked "Made in Russia" on front and side marked Knoxville, Tennessee, USA Intrac Corporation Small arms ammunition, consumer commodity. Outermost part of crate measures 19" x 14" x 6"

894
Pair of hard back gun cases. Black one has padding cut outs and features a rich looking crushed velvet interior; Brown gun case has eggshell padded interior and a couple of stickers on the exterior.

895
Trio of small coolers for your summer outings. Pair of Igloo lunch pail coolers for those quick little day trips; also a larger Thermos brand cooler. All 3 contain two ice packs within. Largest cooler measures 16" x 10" x 12" tall.

896
Stack-on brand locking gun cabinet for the storage of your 2nd amendment items, valuable currency, etc Includes keys and measures approx 21" x 10" x 18" tall.

897
Stack-on brand locking gun cabinet for the storage of your 2nd amendment items, valuable currency, etc Includes keys and measures approx 21" x 10" x 18" tall.

898
Iraq War era 9mm ammo can from another country, look it up. Both latches with holes for a lock, and overlapping eyes on front for a third lock. Measures about 20" x 12" x 8" overall.

899
US Military Vietnam War era insulated food cooler incl one compartment. Made by Knapp-Monarch Co. and in overall good condition with scuffs as to be expected. Measures abou t21" x 10" x 16" tall overall. Retains hinges. Neat piece of history.

900
Pair of hard plastic rifle cases. Blue American Spirit Arms measures 4 ft long; black DoskoSport case measures just over 4 ft long. Both have eggshell padded interiors.

901
Lever-style weed and small root puller. Measures just over 4 ft long

902
Pair of vintage macrame plant hangers are approx 3' long when hung straight.

903
Pair of retro macrame plant hangers are about 3' long. Some fraying noted, with wooden bead accents.

904
Marcame is coming back! Two totally retro plant hangers are about 5' and 6' long overall without pots in them. Neat pieces.

905
Down Under cotton oilskin trenchcoat, great for wrenching on cars or forging. Size XL, Style 8300. Comes with extra piece to extend the collar.

906
US Military Army Air Force insulated flying pants. The pants are type A-10, and size 42 and a 30 ish inch inseam. In good condition with a couple small holes noted on upper part of leg.

907
250 lb Howe storekeepers scale is of ornate cast iron construction. Measures approx 2' wide, 1-1/2' deep, and 2-1/2' tall.

908
Impressive elk antler rack, measures 33" wide inside the tines at the widest, and 29" tip to tip of the main beams.

909
Four matching Grote 5371 tail lights with brackets, great for your trailer or flatbed truck.

910
Drywalling or mudding tools incl. 12" puddy or mud hawk puddy knives, tile tools, screen sander, and more.

911
42 lb countertop scale by Buffalo Scale Works is quite delightful and will clean up well. About 1-1/2' long.

912
Plano Side by Side tackle box full of soft baits, lures, spoons, and more.

913
Pair of hard gun cases with locks. Black rifle case measures just over 4ft long, smaller green case measures 22" long.

914
Argon gas bottle is 17" with valve. Comes with some gas, will ship empty.

915
Attractive wine rack with door to put in your cellar or to start your collection of favorite local wines. Door on rack can be locked to keep out the sister-in-law. Rack stands 4-1/2ft tall.

916
Every home gym needs a punching bag! This Classic Canvas brand is 100% cotton shell. Includes the hanging chain to start working out right away.

917
Henry Repeating Arms brand neon clock measures approx 20" across x 6" deep. Clock mechanism runs. Neon tube is broken near one end but definitely worth fixing. These were allowed only to certain qualifying Henry dealers and are uncommon if not rare.

918
Pair of vintage The Arctic Fisherman brand ice tip ups. Probably a bust if you want to use them yet this year unless you live in the Arctic, but get them now and be ready for next year. Measure approx 23-1/2" long and made in Beaver Dam, Wisconsin.

919
Pair of NIP insulated ponchos feature aluminum coated interior for warmth. Package indicates 6 ft arm span and 5 ft length

920
People Meat Packing Co metal sign measures 16" x 10"

921
Scary black blow dart gun measures 43" long. Some minor finish imperfection on the length of barrel.

922
Vintage leather and wood horse hames with brass hardware made into a western style mirror. The mirror measures 32" x 19".

923
Get you a sauerkraut mandolin! This kraut cutter is 25" long. Some minor surface rust on the blades. Stamped T&D Mfg. Co, Indianapolis. Made in the USA.

924
Pair of Crimson Trace metal signs measure approx 17" x 11" One features language from the second amendment.

925
Rugged Mathie-Ruder Brewing Company brand wooden box with metal strap details. Measures approx 15" x 12" x 10"

926
Magpul 60 round AR-15 or M16 magazine. The Gen M3 PMAG has 60 round 5.56x45 or .223 cartridge capacity, and appears to be new. Fits several makes and models, see pics.

927
Get your emergency kit beefed up with these Wise Company brand freeze dried pasta alfredo with chicken. 5 years past the best by dates but packages are completely sealed.

928
Pelican 1300 Case measures 11" x 10" x 7" Foam is in nice condition.

929
Mitutoyo shock proof caliper that reads up to 6". The caliper is in good condition and comes in a case.

930
Bait and Tackle to toss into your fishing tackle box incl NIP Eagle Claw hooks, NIP South Bend brand Nylon Leaders, NIP Smithwick Rattlin' Lure, assortment of Mepps hooks, variety of sinkers and NorMark brand fish knife, more

931
6 unopened packages of Wise Company freeze dried meals in a mylar bag. All bags manufactured in 2012. Those with listed best by dates have expired but bags feel sound.

932
Pair of Fiocchi Ammunition boxes measure approx 11" x 5" x 7" tall

933
Quick Fire Cases glock case holds 2 glock pistols. Nice locking handles. Measures 11" x 10" x 5"

934
Two pairs of advertising carving kits incl. peerless knives pattented 1983, Steinecker's, J.J. Walker, WM.J. Straka Funeral Director, more.

935
Bernzomatic two burner propane stove measures 16" x 10" x 7" tall. Very nice little vintage burner.

936
New in Package HFS brand 2 in 1 Brake Bleeder and Vacuum Pump Test Tuner Tool Kit, model no 11896.

937
7 unopened packages of Wise Company freeze dried meals in a mylar bag. All bags manufactured in 2012. Those with listed best by dates have expired but bags feel sound.

938
Pair of Fiocchi Ammunition boxes measure approx 11" x 5" x 7" tall

939
Sweeney's brand Mole Trap appears to be NIP. All Steel construction.

940
6 unopened packages of Wise Company freeze dried meals in a mylar bag. All bags manufactured in 2012. Those with listed best by dates have expired but bags feel sound.

941
Pair of canteens for your hunting trip out West or Up North. Both feature a nice insulated bag that can be clipped to a belt or a strap carry.

942
Pelican 1400 Case for your handguns. Interior foam is in great condition. Case measures 14" x 12" x 6"

943
94" Adventuridge brand Extra Long Folding Table appears to be in good condition and comes with user manual.

944
2 pairs of men's snow pants. Green pair of snow pants are constructed of a canvas-like material perhaps military?? and lined with a removable insulation layer. No brand markings but tag reads C 56 and is stamped 1978 ERLA. Black pair are RefridiWear brand and size XL? They measure 23" straight across with a 30" inseam. Heavy duty metal zipper and buttons when they made those things well.

945
Wilson's leather brand men's black insulated leather jacket, size L. Leather is a little worn in high contact areas and is overall a little stiff but still lots of road miles in this jacket.

946
Prorider brand women's black leather vest. Size 46. Also includes a black Victoria's Secret brand black leather backpack style bag with fringe. Bag measures approx 14" tall.

947
8 Rapala and other fishing lures incl. lures up to 4-1/2" long.

948
Gamehide brand insulated camouflage overalls. Size 4X. Style number W28. 2-way double end front zipper as well as hip to ankle zippers.

949
Pioneer Wear brand brown leather vest. Size 44. Some imperfections in leather throughout.

950
Stearns brand boating vest, type III, size Adult Large. Khaki colored with pockets and Black Stearns ski vest, type III, size adult unversal

951
Pelican Hardback 1080 hand gun case and Doskocil hard hand gun case. Doskocil has foam layers to hold multiple guns. Smaller Pelican case measures 14" x 10" x 2-1/2" and has a long, strong locking mechanism.

952
A large variety of soft plastic lures and some Screwtail grubs NIP.

953
Plano Gun Guard pistol case measures 14" x 9-1/2" x 4-1/2" tall. Interior foam is in great shape.

954
Large assortment of ice fishing gear incl poles, NIP Trilene and Cajun Line fishing line, additional NIP Gudebrod Ice Line, more

955
Classic "bad guy" firearms and weapons training poster; tube contains "The story of a government that almost didn't happen" and a parchment replica copy of your Bill of Rights.

956
SmartLights snowflurry light for your LED light show and a string of Remington shotgun shell lights. Snowflurry light appears to be NIP.

957
Pair of Pelican brand hand gun cases. Larger case is a Pelican 1200 and seems to have replacement foam pieces inside. Smaller case is 1120 and appears to have original foam pieces.

958
Drago brand bag for all your things that need to be organized like maybe your reloading supplies. A pair of hand gun cases and a camouflage rifle case.

959
Up North style coffee table with glass top measures approx 4ft long x 2ft wide x 19" tall. Has a drawer to display your favorite pew pews and includes a nice section of green velvet fabric to stage your display perfectly.

960
Check out these Smith & Wesson mats for your reloading setup, sighting in practice, or for your man cave. Largest measures 17" x 11"

961
Very neat vintage rucksack backpack could possibly be Swiss Army? measures approx 22" tall. Feels waterproofed and leather is slightly stiff. Very cool piece.

962
Double bit Wedgeway axe, stamped Morley Murphy Hardware Co, Green Bay. Axe handle is tight.

963
Coleman brand folding table to set up at hunting or fishing camp. Measures apaprox 4ft x 2ft.

964
Extra Long Folding Camp Table appears to be in good condition and measures 8 ft long

965
Extra Long Folding Table appears to be in fair condition and measures 8 ft long. Some minor rust spots? on edges

966
Extra Long Folding Table appears to be in good condition and measures 8 ft long

967
Homelite 15" cut weed whacker is about 4-1/2' long. Untested as the tank is dry but engine has compression. Sometimes the older ones run longer than the new ones!

968
Set of 4 large ratchet straps up to 2-1/2" wide with custom trailer rail ends.

969
Black tactical mesh vest. No name brand found. Guessing adjustable up to a men's XXL? Made in China.

970
Hiking pack frame with some military parts, and a 3' long bag. The aluminum frame measures 20" x 12".

971
Brigs & Stratton Elite Series portable generator with a 10 HP Brigs and Stratton OHV engine. The generator has four 120 volt outlets, and a 120 / 240 volt outlet. Fires up, runs well, and all four 120 outlets work, 240 volt untested.

972
MacGregor baseball / softball umpire's mask and a pair of size 11-1/2 Men's Lange ice skates. Bottom of skate boots are marked PD4 00657. Some blade rust.

973
Assortment of spinner fishing baits. Most measure approx 2-3" wide

974
Spotted trout wall mount is 24" long.

975
Small, metal 3-drawer organizer with super cool looking finish. Measures 12" x 10" x 9" overall. Each drawer is about 2" deep.

976
Large 30-drawer organizer measures 36" x 20" x 12" deep. In its previous glory it was used as office supply storage and most recently as ammunition storage.

977
Equipto brand 18 drawer hardware organizer measures 34"x 11" x 13-1/2" tall. Has a few pieces of bonus hardware to get you started.

978
Aluminum food funnel and hand crank Squeezo brand food grinder. Perfect for making homemade applesauces, baby food, and more

979
Atlanta Stove Works brand, no 60, cast iron pot belly stove. Needs a little elbow grease if you want to use it, ready to go if you want to use it for decoration. Stands about 30" tall.

980
Nice variety of vintage buttons on button cards and loose.

981
Pair of 2 man crosscut saws ready to hang on the antiques wall or turn into your newest craft hobby. Longer is 66" overall. Both appear to have original wooden handles.

982
KLH speakers, model no 403A and Roadmaster 2 way speakers, model no RTS2000TM. One Roadmaster speaker has a dent. See pictures.

983
1970 Wisconsin Highways map, Illinois and Iowa maps, vintage Walther League booklets, short wave station list and Radio station markers book, others

984
Coleman Xtreme large ice cooler for all of your beverages and a handy wooden seated metal chair to take along with you.

985
4-1/2 ft long crosscut saw appears to have original wooden handles. Would be a beautiful piece to paint on or display as is.

986
Team Glock banner with grommets on edges and corners. Measures approx 5-1/2 ft long.

987
Cameron's stovetop smoker, 16" electric patio grill, Apollo 12v cooler / warmer, and a Crock Caddy slow cooker bag. Smoker about 14" x 10" id and comes with recipes. Car cooler about 13" x 7" x 10" tall and comes with cords, cools and heats. Bag in good condition. Grill heats.

988
Coleman Powermate VP201 air compressor with hose. Runs and develops low pressure but seems to need some work.

989
Two matching Zebco Dura Action two-piece fishing rods with Zebco 202ss reels. All eyes intact. Some small nicks in cork and foam, nothing major. Measure 66" long.

990
Washer toss yard game, each box is 16" x 16".

991
St Croix fishing rod with a Copperhead reel. 25SP-66MD. All eyes intact. Some minor imperfections in cork. Measures 6'6"

992
Nice Frabill Speed Shak Cub ice fishing shanty. Base is about 5-1/2' x 4' wide.. Features Arctic-Armour fabric,. In nice condition, a couple pipes not inserted for pics and one looks bent, but shanty is definitely useable without. Dual hole system in floor. Buy now for next year.

992A
4' pickup truck bed storage bag, about 20" high and 7" deep. All in good condition.

993
Pressed wood wardrobe stands about 4ft tall x 3-1/2ft wide. Needs a little drawer bottom work but would make a great little girl's dress up play closet.

994
NIP? Six Flags Battle Blaster Sting Ray pool toy, kids compound bow and arrows with practice tips, and NIP TimeIt brand Outdoor Mechanical Photocell Timer. Six Flags ticket coupon in the pool toy are probably expired :)

995
NIP Johnson Tangle Free Series Model TF10 fishing reel, plus Shimano, Zebco, and other Johnson reel.

996
Whitetails Unlimited brand fixed blade knives in a black canvas belt sheath. Longer knife measures 9-1/4" overall.

997
NIP Champion brand Duraseal Crow Spinner Target, model no 40949, is ready for you to practice your shot. Crow measures 7" tall.

998
NIP Browning RMEF fixed blade knife, marked model 780RMEF, and black canvas belt sheath.

999
2 pairs of blaze orange Remington neoprene gloves, sizes M & L. Pair of Stabilicers brand traction soles to strap onto your shoes to keep yourself upright on ice. Size M; pair of duenorth brand heel traction aids.

1086
NIP Bass Pro Shops floating pliers, Trilene 8lb partial roll fishing line, other Stren and Berkely fishing line, Weller lure, soft baits, more in a metal box about 11" x 8" x 4".

1087
Full or mostly full 100 piece box of Hornady .270 cal 100 gr spire point bullets measure .277 dia.

1088
Full or mostly full 100 piece box of Hornady .30 cal 110 gr round nose bullets measure .308 dia.

1089
Full or mostly full 100 piece box of Hornady .30 cal 110 gr round nose bullets measure .308 dia.

1090
Full or mostly full 100 piece box of Hornady .270 cal 100 gr spire point bullets measure .277 dia.

1091
Three vintage folding knives, plus other pocket knives. Names incl Sabre, Imperial, Hammer Brand USA, Evans, more. Longest about 3-3/8" closed. Some nice looking handle slabs in good condition with no cracks noted.

1092
Lyman T-C tungsten carbide resizing die for decapping and resizing cartridges for reloading. Comes with box. End of box reads 38 SP. 357 Mag. Measures about 4-1/4" long overall.

1093
Sentry 1100 fire resistant lock box with keys is great for a handgun or important papers. Measures about 12" x 7-1/2" x 3" ID. In good condition.

1094
Will ship without liquids. Airhead water tubing air pump with different nozzels, and a Hoppes No. 9 rifle cleaning kit. Both in good condition. Pump plugs into car and measures about 4" tall.

1094A
Southwire Seatek Series Roto-Split cable splitter measuring 7-1/2" long and in very good condition,

1095
Nice Hen & Rooster Special Production Run 1 of 200 fixed blade knife with sheath and box. Knife measures 10-5/8" long overall and is in good condition - blade, bolster, antler like handle slabs all tight and handles with no chips or cracks noted. Comes with matching leather sheath in great condition. Spanish made with German - Stainless marking.

1096
Daisy Powerline 880 pellat air rifle in .177 cal. Pumps and shoots, measures about 38" long overall. Nice Daisy squirrel scope. Stocks in good condition, great gun.

1097
Ten pieces of 1988 50BMG military brass cases. Heads are stamped IK. .

1098
Vintage Crosman Model '338 Auto' air pistol BB gun with original maunual, NIP Crosman Pellgunoil, Co2 cartridges, several bbs. In good condition. Measures about 8-1/2" long. Vintage manual in great condition. Gun brand from the Coleman Co.

1099
Coleman hatchet features nail puller notch on head and a non - slip handle. Measures 4-3/4" over head and is 13" long.

1100
Seller notes 120 pieces of Lake City 1968 brass.

1101
Lyman or similar reloading powder dispenser is 10" tall and in good condition.

1102
Vintage leather Shepler cowboy boots and a pair of Vibram combat style boots. Vibams in good condition with minimal wear, size 3-1/2W, about 10-1/4" over bottom, tag in tongue reads Altama. Shepler boots size 8-1/2D, Good Year soles, about 13" tall. Show some frayed threads and wear, but look like they have been recently conditioned.

1103
USBP (United States Border Control?) tie clip marked Sterling, vintage Jon-E hand warmer made by Aladdin Mfg. Co.; really cool Permanent Match lion lighter in good condition; several lighters incl Symbol, Austrian - made Champ, other; vintage Boston Lead Pointer box with good graphics, more. Hand warmer about 3-1/2" long. USBP clip about 1-5/8" long and weighs 6.7 grams.

1103A
Vintage Gillette Black Tip Super Speed safety razor is date coded W2 and made in the USA. Knob turns nicely and flaps open. Measures about 3-1/4" tall closed.

1103B
Vintage Nimrod Pipeliter was made in USA and measures about 3" long closed. Lighter sparks, neat piece.

1103C
Classic jaintor's "Key - Bak" key holder by Lummis Mfg. Co of Pasadena 8. Calif. Chain pulls and retracts, belt mount piece about 2-1/2" long. Buy and start using, sturdier than many pieces made these days.

1104
Vintage Zippo lighter, Peterson's art deco pipe lighter, other pipe lighter about 4-1/4" long. Peterson's about 3-5/8" long overall, whell siezed up but may be easy to fix. Other pipe lighter wheel turns but no spark, top piece near clip turns to increase or decrease flame. Zippo with three strikes on either side of marking on bottom and made in Bradford PA USA .

1105
Antique and newer fishing reels on a couple of vintage rods. Reels incl Bronson No. 2200 Green Hornet with heavy line, Atlas 1708 Model D by Kalamazoo Tackle Company, Zebco No. 33. Rods incl two-piece 65C6 six foot Spincast, and a sturdy Actionized steel rod about 5' long with cork handle. All eyes on rods intact. All reel handles wind smoothly, green one about 4" wide over handles. Great for the collection or for decoration at the cabin.

1106
Can ship without rod. Vintage Penn 9 Level Wind open reel on a sturdy 88" one - piece fishing ro with cork handle. Reel is outfitted with heavier line and measures about 5-3/4" wide over handle. Retrieve to Free Spool lever works, and ratcheting to silent switch also works; handle spins nicely. Mounting bracket marked 3ON-9. Rod in overall good condition; eyes are intact, cork fair to good, reel tightening nut is two piece and spins smoothly.

1107
Vintage St. Croix Tournament Fifteen Hundred No. 63-265 two-piece fishing rod was made in the USA. Measures 79" long overall. Eyes intact, string wrappings good with just one slightly fraying above top of bottom eye (see pics), cork good for age of this rod. Reel tightener screw moves easily. Great collectible rod.

1108
12" x 9" box of .223 Remington brass, and Winchester .45 Auto brass as pictured. Incl boxes. Reload for your AR-15 or similar.

1109
Nice climbing tree stand has a goot platform about 33" x 19" overall and a top portion with cushion seat. Black part of cushion with some mouse chews, replace or use as-is. Nice stand overall with backpack style straps for easy carry and clamp with knobs to hold it all together.

1480
No shipping and must be 21 to purchase. Full 1977 McCormick Elvis bourbon whisky decanter / music box is sealed and comes with original box & COA. Piece stands 15" tall, music box works.

1481
No shipping and must be 21 to purchase. Full 1977 Aloha Elvis McCormick whiskey decanter with tax seal intact and music box. Stands 16" tall, comes with original box and COA. Music box works.

1482
No shipping and must be 21 to purchase. Full 1977 Elvis Presley McCormick whiskey 'Elvis Presley 55' decanter is the 2nd in a series. Comes with original box, music box and COA. Decanter is full, tax seal in intact. 14-1/2" tall. Music box works.

1483
Ezra Brooks and Weston Springs Distilling Co. empty decanters. Stove stands 10" tall.

1484
Vintage serving pieces including lazy susan with five sections, measures 14" diameter - includes center piece with lid. Stemmed condiment server and a heavy glass candy dish with lid, a few chips noted. .

1485
Belgian made tapestry depicting a Middle Eastern scene measures 57" x 19".

1486
Vintage Oshkosh reindeer candle in original packaging. two Saalfield coloring books, vintage coaster set with original set.

1487
Vintage children's records including Jim Along, Josey; several Peter Pan Records, Happy Birthday record with sleeve; Mid-1970s Playsong records; yellow Disney records.

1488
Antique books including Cup of Gold, Tortilla Flat, Of Mice and Men - copyright 1937; others. Most by John Steinbeck.

1489
Vintage books including A Physician in the House, copyright 1897, back cover is detached; plus six published by Collier with mulitple short stores - copyright 1940.

1490
Framed silhouette is 12-1/2" tall; pair of vintage flower prints and two mountain scenes.

1491
Agfa Ansco Shur Shot box camera; five boxes of Polaroid film for The Swinger Model camera.

1492
Antique pocketwatch chain is approx. 13" long; Swiss made Remington wristwatch face, winds, runs and stops; Anson money clip; tie bar and two patriotic flag pins.

1493
Vintage Allster Knife Co. folding pocket knife; Urham Uplex razor; badger hair and other shaving brushes; styptic pencil by Walgreen Company; more. Straight razor handle slabs in good condition. Knive handle slabs are tight, 3-1/2" closed.

1494
No shipping and must be 21 to purchase. Full Jim Beam Bobby Unser Gurney Eagle racing car decanter, tax seal is intact. Decanter is 20" long overall and comes with original box.

1496
Antique straight razor with box; badger hair and other shaving brushes; Ever Ready and other clippers; 7" Cornell comb; Weck folding hair shaper, missing pin.

1497
Vintage souvenir postcards from Florida, Wisconsin, Minnesota, Washington, possibly others. All unwritten.

1498
Vintage souenir postcards - only one written, postmark 1945. Depicting Navy and several cartoons - all look to be the same vintage.

1499
Vintage postcards from Northern Wisconsin, plus US Naval Training Station, Great Lakes.

1500
Vintage postcards including cartoons, postcard books from Portland Oregon, Fargo, North Dakota, Bad Lands and more.

1501
Vintage cartoon-style postcards, all unwritten.

1502
Vintage cartoon-style postcards, all unwritten.

1503
Large and small grease guns with Marine and trailer, and other Grease, chimney brush, ladder or similar hanger, more.

1504
Blue Ball jar, Danish oil, GE radio, a bail top jar, more.

1505
Fly fishing reel, two open spinning reels, and a pair of enclosed reels.

1506
11 jigsaw puzzles up to 500 piece.

1507
Stanley tape, Ryobi countersink, rubber mallet, ratchets, and more.

1508
Stanley and other screwdrivers, nut drivers, and pliers.

1509
Sturdy wood duck house, measures 11" x 12" x 21" tall. Hole measures 4" diameter.

1510
Craftsman screwdrivers, nut drivers, pliers, Vice Grips, more.

1511
Brass anvil, measures 4" long, vintage hardware, rivets, more. Wll ship without matches.

1512
General brand drill grinding attachment, model no 825. Includes instructions and original box.

1513
Black & Decker 7-1/4" circular saw, model no 7359, 10Amp, 5300 RPM. Runs.

1514
Plumb brand axe measures 18" overall. Axe head is tight.

1515
Assortment of hand saws incl Stanley Handyman saw, hacksaw and a bow saw. Stanley measures 30" overall.

1516
That'll buff out! Car polisher stands 8-1/2" tall and buffing head measures 9" across. Runs.

1517
Weller soldering gun, model D-440, has a spliced cord but otherwise in good condition, and heats.

1518
Claw hammer and ball peen hammer. Claw hammer head needs to be tightened a bit. Peen measures 14" and claw is 13" long.

1519
Black & Decker and Skil brands jig saws. Black & Decker model no 7580 and 3 Amps; Skil model no 81497 and 3.2 Amps. Both tools run.

1520
Schumacher 6/2 Amp Dual Rate Battery Charger has a small amount of tape on the cord where the cord was nicked. Perfect for your old tractor and old submarines.

1521
Black and Decker, and other drills incl. a right angle drill, and a regular drill. Both tools run.

1522
Black & Decker 7-1/4" circular saw comes in a fantastic orange metal locking box. Cord appears to have been repaired. Runs.

1523
Variety of hand tools incl an Arrow T-50 staple gun, a couple of adjustable wrenches, T15 bit driver, Stanley line level, more.

1524
Seller notes 500 pieces of .308 Winchester brass.

1525
Seller notes 1000 pieces of .308 Winchester brass by Federal.

1526
Seller notes 500 pieces of .308 Winchester brass.

1527
Seller notes 500 poeces of .308 Winchester brass by Federal.

1528
Seller notes 500 pieces of .308 Winchester brass.

1529
Seller notes 500 pieces of .308 Winchester brass.

1530
3 pieces of Creekside brand camouflage rolling luggage. All 3 pieces measure approx 21" x 15" x 8" All zippers appear good and functional. One suitcase has a broken piece on the front. See pictures for detail.

1531
Large purple tote and metal tool box. Tool box measures 20" x 9" x 9-1/2" tall.

1532
200 pieces of .308 brass ready for your reloading projects.

1533
400 pieces of .40 Smith & Wesson brass made by Federal all set for you.

1534
416 pieces of .40 Smith & Wesson brass made by Winchester ready for your reloading

1535
200 pieces of .308 Hornady brass ready for your reloading projects.

1536
Sony LBT-D250 Compact Hi-Fidelity Stereo System with detachable wire speakers. System has 5 disc CD player, cassette tape deck and radio capabilities. Comes with remote and antenna.

1537
Sanyo 3 disc CD player, cassette tape deck, and radio system with 4 detachable wire speakers. Also comes with a remote and typewriter tape.

1538
Vanner Power Group SineWave Inverter, model no IT12-1600. According to sticker on device, it is a land/recreational vehicle power inverter. Unit measures 16" x 14" x 8" and includes attached mounting brackets.

1539
Double basin stainless steel sink measures 32-1/2" x 18-1/4" with 9" deep wells. 3-1/2" drain openings. Appropriate for drop in and undermount installations.

1540
Delta Pro truck bed tool chest / storage box measures 60" wide at shortest width and 70" across at the longest width. Box has 17" total height.

1541
18 puzzles up to 300 pieces, cross word puzzles, more.

1542
10 spring clamps, Irwin pipe clamp top jaw, hammer, file, level, and more.

1576
Husky 1/2" bracker bar, is 15" overall, a Husky 1/2" speed wrench, and 1/2" extensions up to 10" long.

1577
A large variety of hex key wrenches incl. Allen and others up to 9/16".

1578
Assorted wrenches, many sizes and conditions.

1579
Plethora of screwdrivers for your toolbox. Most are regular flathead screwdrivers.

1580
Nice collection of box end wrenches incl. Husky, Blackhawk, and others up to 1".

1581
Two NIP sets of Rockwell High Speed Jointer Knives, no 37-659 for a 6" jointer.

1582
Pair of toolboxes for your garage or truck. Black Hyper Tough brand 19" includes removable organizers, missing latches, and green metal Park brand is pretty rusty but still usable

1583
Nut driver sets, most are marked U.S.A. The black andeled set appears to be complete.

1584
Sockets incl. 1/2", 3/8", and 1/4" drives. Largest socket is 1".

1585
Assortment of adjustable wrenches and a trio of adjustable pliers, Master brand padlock and keys. Largest wrench is 10" long.

1586
Sockets incl. 1/2", 3/8", and 1/4" drives, 1/2" to 3/8" conversions, most larger sockets are by Allenite. Largest socket is 1".

1587
Nice variety of hand tools to toss into your toolbox incl hacksaw, Stanley utility blades, pry bar, putty knife, Red Devil brand drywall mud knife, 3M electrical tape, Hole Saw Mandrel with 5/16 Shank, more

1588
Sockets incl. Armstrong, Wright, Industro, and others, largest socket is 1-1/4".

1589
Portable Propane Convection Heater in box, adjustable heat output up to 80,000 BTU, push button ignition. Made in the USA. Heater runs but flame is yellow. Needs some tuning or work.

1590
Nice selection of Williams and other phillips and flat head screwdrivers and hex nut drivers. Longest screwdriver measures 13" long

1591
Plethora of screwdrivers incl. Oxwall insulated electricians scrwedrivers, and others in a variety of sizes.

1592
Smith's brand Unbreakable Ceramic Sharpening rods to sharpen all the knives in your arsenal.

1593
Cast Iron Tea Pot would be great for decoration. Measures 10" wide.

1594
Assortment of hand saws, Pop rivet tool, Lufkin folding ruler to measure up to 72" and more.

1595
Indestro Select brand ratcheting wrench set. Largest measures 10" long. Sizes 1/4" - 15/16". Nice set.

1596
Nice selection of phillips and flat head screwdrivers, longest screwdriver measures 11" long.

1597
Milwaukee, Black and Decker, and other drills with 1/2" and 3/8" chucks. All run.

1598
Box end wrench set up to 7/8" neatly packaged for the tool box. Made in U.S.A.

1599
Wiss and Pexto tin snips, larger pair measures 11" long and both are in good condition.

1600
Pair of Durbin Durco Midget chain binders measure 11" from handle to pin.

1601
Husky 1/2" bracker bar, is 15" overall, a Husky 1/2" speed wrench, and 6" extension with 3/8" drive.

1602
Pop rivet tool, model K110, for the DIY riveter.

1603
Ridgid 18" pipe wrench with a straight handle, and good sharp jaws.

1604
Husky 1/2" drive speed handle, and two 1/2" extensions, longer is 10" long.

1605
Black & Decker 12A leaf blower and vac with components. Model BV6000, runs up to 250 mph. Sucks and blows. Measures about 42" long over nozzel as pictured. Notch cut out of handle.

1606
Wilson's Leather brand men's insulator leather jacket, size M. Leather appears worn on high contact areas.

1607
Unique yellow enamel plate and covered bowl, green coffee mugs and a ginormous enamel coffee cup for the serious coffee drinker.

1608
Nylint dump truck and Tonka concrete mixer truck like you had as a kid.

1609
Stanrite brand sign and display easel set, model no 350.

1610
"The Essential Whole Earth Catalog" and "LSD: Still with Us After All These Years" books for your enjoyment. Super-de-duper interesting.

1611
Aircare 1041 Super Wick. See pictures for compatibility

1612
Fostoria or Indiana Glass flame pattern candleholders would make for gorgeous table decoration. Each stand 8-1/2" tall.

1613
Hobby Train Transformers and General Model Railroad reference ruler, no 1251, Ho, N, and S Gage Scale.

1614
50/50 wooden crate measures 18-1/2" x 11" x 10

1615
Set of 4 Casters, Bright Ring Shank Drywall 1-3/8" nails (less than quarter full), 8D 2-1/2" deck nails (less than quarter full), and 3/4" galvanized roofing nails (nearly full), more

1616
A huge assortment of hand tools, mostly combination wrenches, some open wrenches, files, hoof nippers, more.

1617
Nice variety of metric and SAE combination wrenches up to 1" and 22mm.

1618
Stanley screw drivers, Ace hex nut drivers and more. Longest screwdriver measures approx 13" long

1619
A plethora of Craftsman and other drill bits for your workshop toolbox, 7" NorZon grinding disc, pair of adjustable wrenches, more.

1620
Two pipe flaring kits incl. two clamps and holders, and a Blackhawk pipe cutter.

1621
Totes adorbs Babco brand fine thread 3" bench vise marked 603 with nice grab, Lufkin 50 ft tape measure and electrical wire stripper. Vise jaws measure 3" wide.

1622
Screwdrivers and a little more, both Phillips and regular head, and a couple of Torx drivers.

1623
The best "kid's" toys ever! Weller solder gun, model Standard 7200, with additional soldering tips, pair of Weller brand wood burners, model SP-23, and other.

1624
Framed Pabst Blue Ribbon advertising print.

1625
AC Oil Filters sign.

1626
Brinkmann Smoke 'N Grill

1627
Old-style fuel filters with catchpole.

1628
New, unused 26 quart soft side cooler will hold 36 cans and measures 18" x 10" x 12".

1629
Double bit axe head

1630
Drywall tools.

1631
NRA duffle bag is in good condition.

1632
To be updated

1633
Bow saw

1634
To be updated

1635
Pick axe, singe bit axe head and a replacement Aztec hickory handle.

1636
Two engine starters. The first shows little use and turns by hand, feeling about like a new starter should. No. 050368 and 012721. Second starter shows more use and turns by hand a little harder, No. 041365 and 061019. Are these Kubota?

1637
Two Kubota fuel filters, NIP. Two heavy steel brackets No. 20827961. Another cast iron piece approx. 6" square.

1768
Very nice Schwinn 470 Journey 4.5 elliptical is in great condition. Comes with manual.

1769
Schwinn Airdyne exercise bike is in great condition.

1802
Game calls including Lohman Deer Model 33; Faulk's Crow Call; another call.

1803
8" and 10-3/4" J. Marttiini filet knives with matching sheathes.

1804
Vintage Weems Wild call for fox, wolves, cats comes with original box and paper.

1805
Long range fox call by Bunham Bros., Perfect Squirrel Call and Perfect Deer Call by P.S. Olt, and Primos Power Owl call.

1806
Gerber knife sharpening stone with leather sheath measures 8-3/4" closed.

1807
8" and 10-3/4" J. Marttiini filet knives with matching sheathes.

1808
Gerber Mini-Magnum leather knife holster with Gerber sharpening stone measures 8-3/4" long

1809
Three leather belt mount ammunition holders made by Hunter and Eubanks. Hunter is numbered 538-12 and measures 7" long. Other two are numbered 130-06 and measure 10-1/4" long.

1810
Die cast Amoco 1950 gas pump replica coin bank. Box is 11" tall.

1811
Handcrafted duck decoy type ashtray base was made by the Grand Rapids Carvers of Michigan and is outfitted with a Hyalyn No. 771 tray. Tray in good condition. Wood also in pretty nice condition and would shine with a little wood oil. Base measures about 13-1/2" x 7-1/2".

1812
Four pocket watch chains or fobs, up to 17-3/4". One swivel link is marked Radio, other gold toned swivel link is marked L&R, pearl accent chain's swivel hook is marked Numium.

1813
Die cast Ertl 1932 Ben Franklin Limited Edition Ford Delivery Van coin bank with key is 6-1/2" long overall. In good condition.

1814
Diecast Ertl 1913 Ford Model T Pet Milk Van coin bank with key. In good condition, with just some slight scuffs noted on one side. About 6" long. Box looks appropriate but label on bottom reads a different model.

1815
Ertl Collectibles Texaco Petroleum Products 3443 Ford Tri-Motor Racing Champions airplane is about 12-1/2" over wingspan. Die cast, Issue #7. Comes with key and is in good condition.

1816
Die cast Ertl United Van Lines 1917 Ford Model T Van coin bank with key. In good condition and measures nearly 6" long.

1817
Ertl 1951 Ford Pickup Truck die cast coin bank promotes Wix Filters. Comes with key measures 8-1/4" over hitch. In overall good condition with just a couple of small scratches on top of cab and a few little paint chips on passenger side rear, looks like it went down a gravel road.

1818
Die cast Ertl coin bank is a 1913 Ford Model T Van replica that promotes 1867 Nova Scotia Canada. In good condition. Comes with key and measures nearly 6" long.

1819
Liberty Classics Limited Edition Sunsweet Prune's 75th Anniversary Edition Ford Model 'A' Van coin bank with key. In good condition, about 6" long.

1820
Die cast Ertl 1/25th scale Steelcase 1905 Ford's First Delivery Car replica coin bank. No. 3428. Needs bank panel and key, or just display this nice piece as it is. In otherwise good condition, about 5" long.

1821
True Value Hardware No. 20 fire engine coin bank is about 7-1/2" long. In good condition, just find a key from your collection that fits it. Back reads 'A TruServ Company'.

1822
Vintage coin bank was made by Banthrico, Inc, of Chicago USA. Nice piece measures 5-1/2" long and is in good condition, just add key.

1823
Vintage Ertl die cast Montgomery Ward 1932 Ford Panel Delivery Truck or Van Collector Coin Bank is No. 5 in a series. Comes with original box and is No. 2110. Incl key and is in good condition.

1824
Die cast Ertl #1 Texaco NR-7955 airplane is 12" wide. Officially Licensed Product, side reads 'Texaco 5' and 'The Texas Company Petroleum Products'. In overall good condition with reasonable small reasonable chipping in front and rear wings noted.

1825
Die cast 1/18 scale Road Signature 1968 Shelby GT-500KR muscle car with box and stand. No. 92168. In good condition; and doors and hood open and wheels turn. Measures about 10-1/4" long.

1826
Ertl Collectibles die cast metal 1956 Ford Pickup Truck in original box. Box is 9-3/4".

1827
Ertl, Matchbox, National Motor Museum Mint, other model cars, some die cast. Longest about 6-1/4", crate bed truck is 1/43 scale. Ertl about 3-1/8" long. Matchbox made in England and incl Coal & Coke, Colman's Mustard, Lipton's Tea. Pieces in good condition with just one paint chip noted on front of Coal truck. Nice pieces.

1828
Catepillar 365BL Series II model excavator by Norscot Group, 1/24 scale 1964 Mustang, Ford Motorcraft semi tractor and trailer by Matchbox, Classic Collection Mercedes Banz model car with box, 1/43 scale Motor Max 1949 Mercury replica model car. All in good condition, Cat bosy about 4-1/2" long. Semi about 7" long overall. Buy the car of your dreams here and enjoy looking at it from the comfort of your chair, save on price and space in your garage.

1829
US Military and other pieces incl Sterling Silver 1943 MCPC pendant, Sterling 1K Rifle bar, USMC pin marked 592, two screwback buttons that look like USMC, three US Army buttons made by Scovill Mfg. of Waterbury and Bliebmann Mfg. of Newark NJ. Sterling pieces weigh 9.1 grams total, bar about 1" wide. Largest pin about 1-1/8" tall.

1830
National Motor Museum Mint pieces and more. Model cars up to a liitle over 5" long. Four in good condition, one needs a little glue.

1831
Die cast metal Ertl Collectibles 1936 Ford Panel van with Minneapolis Star Wired Photo graphics. Comes with original box.

1832
Liberty Classics and SpecCast Limited Edition die cast coin bank vehicles incl 1948 Ford, 1937 Ford Schwan's 50th Anniversary, 1934 Ford Good Year car. All in good condition with keys. Trunk doors open to show coin slots.

1833
Maisto 1/18 scale 1956 Chrysler 300B car, Redbox 1937 Ford Pickup truck, and other on base. All three in good condition with doors and such that open. White car about 11" long.

1834
Liberty Classics Heddon Fishing Lure 1916 Studebaker die cast replica coin bank with key (Limited Edition), Ertl die cast 1918 Runabout replica Ben Franklin coin bank with key, Ford Texaco truck with die cast collector gas pump, two classic street cars. All pieces in good condition. Ertl is 5-1/2" long, Heddon is about 6" long.

1835
Ertl Collectibles die cast 1/25 scale True Value Hardware Ford Pickup Truck with coin bank crate load. Comes with box. Packaging has been opened but truck is in good condition.

1836
Liberty Classics Limited Edition Clark Ford Model A die cast pickup truck coin bank with oil crates is Fourth in a Series. In good condition, measures 6" long. Comes with key and box.

1837
Will ship without tin. US Military buttons, 1-3/8" tall RAU US military belt buckle, 3-3/4" tall patch, more. Widest US Army pattern and is 1-1/2" wide. Incl five large and six small USMC Serial No 176 buttons by WB Co. Several 1" US Military pins marked 623, LR, M21, etc. Other neat pins, look them up. Cool pieces of our military history and more.

1838
Sterling piece marked with a P; plus Buck, Remington DuPont, and G96 No. 920 leather knife sheaths and three pocket watch cases or similar. Remington sheath about 10-1/4" overall, black ones about 9-3/4" and 8-5/8" overall. Sterling inscribed on back "W.E.Brandt' and measures 2" x 1-1/8", weighs 19 grams.

1839
Vintage Silva 'The Ranger' Type 15T was made in Sweden and comes with leather case. Measures approx 4" x 2-1/2". Latch on lid resembles a rear rifle sight. Compass arrow works and points north. Crack noted in mirror, otherwise both compass and case are in good condition. Measures in cm / mm and in and 1/10".

1840
Vintage liquid filled compass, and a Suunto M3 compass made in Finland. Suunto about 4-3/4" x 2-1/2", works. Other about 1-3/4" wide.

1841
Two Zippo lighters were both made in Bradford PA. Both are five-bar hinges. One has a single bottom dash. The other has four and three bottom dashes.

1842
Vintage row boat oar locks and brackets up to 7".

1843
Five lighters up to 3-1/4" long. Red one with coil that heats. Dragon one lights with double flame. Other coil one sparks but but coils do not turn color.

1844
Vintage Barlow B16 butane lighter with case. Sparks. Measures about 2-1/4" tall and is in good condition.

1845
Brunton Model 8040 compass with case. Looks accurate, measures 3-3/4" x 2-1/2" and is in good condition.

1846
Ronson, GS King, Windmill, other lighter. Butane and other, tallest about 3".

1847
Antique compass by USAnite, case marked 'ENG DEPT USA 1917'; other compass is approx. 1-3/4" diameter and a smaller, pendant style compass that measures only 3/4" diameter.

1848
Westclox 'The Conductor' pocket watch has locomotive reproduced on back and comes with case and papers. Winds continuously, hands set but couldn't get it to run. Comes with neat chain and may be easy to get going again.

1849
6-1/2" long Walco pipe wrench box has clear graphics on one end and box jointed corners - contains US marked compass case, other similar style case, percussion cap tin, and a Scripto lighter case.

1850
Swiss made Park Watch Co. 2 jewel unadjusted stopwatch runs, stops, resets. Looks like it winds but is currently would tight. Numbered by gears 'No. 3364' and '457347'. Also numbered inside of outer back panel '455554' - unique numbering sequence, Crystal detaches but should resecure with a dot or two of glus. Looks like some hailine cracking near smaller face, but minor overall. Switch slides nicely and button pushes smoothly. Measures about 2" wide.

1851
Vintage Swiss Made stopwatch winds, runs, stops, resets. Measures about 2" wide. Unique manufacturer marking on front.

1852
Retro Hanhart Pic Jewelled stopwatch made in Germany. Winds, runs, stops, and resets but sometimes will stall out and with a little shake will start again. Measures about 2-1/4" wide. Really neat graphics on face. Crystal in good condition.

1853
Vintage Swiss made Super Select stop watch is 2-1/4" wide. Winds, runs, stops, resets. In good condition, edge of crystal looks like there is some glue around it.

1854
Antique brass trench art lighter features half cent panels on sides and still retains fuse cap. Coins look to be Great Britian or United Kingdom. Measures 1-1/8" wide and 5/8" thick. Unique piece. Reverse side cent reads 1940 - coin is WWII era.

1855
Suunto Co. Helsinki Model KB-14 / 360Q compass is about 3" x 2". Is this a sighting or quadrant compass? Looks like it works. Back reads 360 degree Cotangens. Made in Finalnd and is numbered 011376.

1856
Antique German made Wanderer map plan measure with route marker features a compass on back and comes original leather case and instruction paper. Measures about 3" tall over loop. Roller wheel works, as does marker and compass. Neat piece measures both miles and nautical miles on a map.

1857
Antique brass Soo Line railroad or railway lock key made by Adlake. Ring marked with an S. Measures 2-1/8" long overall and 1" wide over loop.

1858
Antique Cutiecut German map plan measure converts centimeters to kilometers, inches to miles or verstes, and shows statute miles, kilometers, and nautical miles on the other side. Measures about 3" long over loop. Wheel turns needles, neat piece. Comes with leather case.

1859
Vintage Zippo lighter was made in Bradford PA and comes with leather Zippo belt pouch. Features a five bar hinge system and is marked on bottom with three strikes on both left and right.

1860
Vintage and newer comapsses all look like they work. Put one in each car, cause up here cell service is not guaranteed. Largest nearly 2" wide.

1861
Four Zippo lighters are all about 2-1/4" tall. Two gold ones do not spark, but black and silver ones do. First two may just need new flint. Two marked Bradford, PA.

1862
Two vintage Gillette shaving razor blade boxes, and a folding thinning shaving razor that opens to 7-1/2" overall. Neat boxes measure 2" tall.

1863
Two compasses that look like they may have glow in the dark dots on the dials, and one that the top doesn't want to open on. Two that I could open look accurate and measure around 1-3/4" wide. Stabilizer works

1864
Die Cast metal 1930 Model A Convertible Roadster with See's Candies graphics.

1865
Pocket watch chains up to 15-3/4" overall, plus a necklace measuring 11-1/2" clapsed and more. Both gold and silver toned hooks marked Swank.

1866
Die cast metal Ertl 1932 Ford panel delivery locking coin bank with Anheuser Busch graphics, 1/25 scale. Appears to be in original box.

1867
Heavy die cast metal 1912 Ford Red Crown Gasoline replica delivery truck, 1/24 scale. Appears to be in original packaging.

1868
Die Cast metal, Premier edition 1940 Ford panel van replica with Menards graphics. 1/32 scale. Comes with a display case and in the original box. Crack in the display case top.

1869
Heavy die cast metal 1912 Ford Pepsi Cola replica delivery truck, 1/24 scale. Appears to be unopened in original packaging.

1870
Die Cast Metal 1936 Ford Pickup replica, item no 36FDPK, 1/32 scale. Measures approx 6" long. Comes with original storage box.

1871
Die Cast Metal Ertl 1913 Ford Model T locking coin bank, stock no 7634. Appears to be in original packaging and unopened. 1/25 scale.

1872
Shakespeare Company Fine Fishing Tackle Die Cast Metal Collector Replica truck, model no 10-1638 "Tackle" 2nd in the series. Measures approx 5-3/4" Comes with original storage box

1884
Will ship without matches. Bug out bag holds emergency blankets. Jon-E GI hand warmer with case, Uco candle lantern, collapsible cup. fire starter bar, more. Fieldline bag about 13" long. Great for the truck or wife or kid's car.

1885
Gun, hunting, shooting books including Shooter's Bible, Gun Digest, Black's Wings & Clay, Shooter's Guide to Rifles, more.

1886
Die cast 1/24 scale Red Crown Gasoline 1912 Ford Tanker limited edition coin bank is new in box. Made by Gear Box Toys. Key includes.

1887
Die cast Craftsman Tools 1928 Chevy collector's coin bank is No. 4 in a series, key included. Box is 8-3/4" long.

1888
Pocket watch chains - some newer and some older. Gold toned, flat chain clip is marked Swank and measures 18-3/4" overall.

1889
Wonderful antique lockable chest with lift-out tray measures approx. 20" x 11" x 10" tall. May have been a tool chest at one time.

1890
Antique Hercules No. 6 Blasting Caps crate has box jointed corners and measures approx. 17" x 5-3/4" x 6" high. Nice graphics and sturdy crate.

1891
US Military and other match safes - will ship without matches. Three similar are each about 3" tall.

1892
Marble's compass looks to be accurate and measures about 1-1/8" wide. Works. Quality piece.

1893
Vintage Emergency Signaling Mirror (ESM/1) was made by General Electric Co. Measures 4" x 5" and could be used to signal a pilot in an airplane when in need of rescue.

1894
Vintage promotional Zippo lighter with box and instructions. Made in Bradford PA with four mark and three mark pattern on bottom. Advertises Harnischfeger P&H and has a five bar hinge. Box in overall ice condition with displayable graphics on front of box.

1895
Will ship without matches. Antique brass match safe or similar and another old match box with hinged lid. Box about 2-3/4" x 1-3/8" Other is 3-1/2" x 1" and has a 'false bottom' type piece in lid.

1896
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth. Measures about 2-3/4" long. Lid seal still intact.

1897
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth. Measures about 2-3/4" long. Lid seal still intact.

1898
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth Measures about 2-3/4" long. Lid seal still intact.

1899
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth. Looks like there is a small amount of corrosion on inside rim and on bottom of inside as to be expected. Measures about 2-3/4" long. Lid seal still intact.

1900
US Military match holder with built-in compass. Measures about 3-1/4" tall. Compass looks accurate and cork in lid is in good condition. Old hard plastic case looks pretty good with two small cracks noted near foot. Neat piece.

1901
WWI era US Enigineer Corps brass compass by Cruchon & Emons Serne. Compass is marked on back 'No. 51529' and has matching numbering on inside of lid. Steadyer and adjustment work, and compass points north as it should. Measures 2-1/8" over top of case. Neat piece. .

1902
Pre-1963 Everdry pocket match safe by the Park Sherman Co. of Springfield ILL, and another vintage match box marked Justrite. Come shallow dents in the Justrite, but none noted in other. Measure slightly on either side of 2-3/4".

1903
Antique Marble's pocket match box with original box was Patented in 1900 and made in Gladstone Mich USA. Waterproof match box / safe opens, hinges feels pretty smooth Measures about 2-3/4" long. Lid seal still intact. Box with nice colors and good graphics. Only missing one flap and bend noted in one edge, minor details considering we usually don't see the boxes wtih the safes at all. Bottom box flap reads No. 181. Great set would make a nice investment.

1904
Antique ESS Co. padlock with key is marked 'Fraim' on back of arm. Reminds me of railway switch lock and measures approx. 4-1/2" overl bottom link. Key works and padlock is in good condition.

1905
Two knife scabbards and two leather fixed blade knife sheathes up to 19" overall.

1906
LED magnifying head lamp with multiple magnifying lenses and instructions. Works, great for precision work.

1907
Vintage advertising pocket knives and others. Folding knife names include Campco, Imperial, USA, others. Longest is about 3-1/8" closed.

1908
Vintage wooden shipping crate was sent from England to the US and measures approx. 13" x 9" x 8" tall.

1909
Antique Jello crate reads 'The Genesee Pure Food Co. Leroy N.Y.' Bottom of crate faintly reads Milwaukee Wis. Awesome piece with good graphics. Measures approx 14" x 8" x 6-1/4" tall.

1910
Will ship without liquid. Lansky Sharpeners knife sharpeneing kit features fine, coarse, and medium stones, plus vise and permium sharpening oil, and more. Case about 8-1/2" wide and 4-1/4" deep.

1911
Knife sharpening supplies and more including Smith's sharpener with sheath, two flashlights with cases, Sportmen's Edge diamond knife sharpener, more. Sportsmen's Edge did not run, may be an easy fix. Flashlights work.

1912
Magnifying goggles by OptiVisor, Conduct-A-Lite inspeciton kit and a stethoscope - great for lock work.

1913
Two stage Crock Stick knife and scissor sharpener with box. Looks complete and is in good condition, about 10-1/4" long.

1914
Skeleton keys, barrel keys and other keys up to 2-3/4" long.

1915
Vintage tractor suicide knob is about 2-3/4" x 2-3/4" over mounting bracket.

1916
Two antique straight razors, one with sheath. Green handled razor by Cataraugus Cutlery of Little Valley, New York. Other by Klas Tornblom No. 750R of Sweden. Both are in good condition, handle slabs and blades look good.

1917
Antique box jointed sewing needle box is filled with a nice variety of polished rocks. Box retains original labels and once held Goodyear Welt or Turn No. 43 needles made for United Shoe Machinery Co. Box is approx. 3-1/4" wide.

1918
Padlocks by Master Lock Co. & others measure up to 2" tall.

1919
Caterpillar tag promotes Brebner Machinery Co. of Marinette & Green Bay, Wis. Necklace with bullet and a 2" military-style tag.

1920
Three vintage match safes are each about 2-1/2".

1921
Antique railroad padlock with key is marked 'C M & St P RR', presumably Chicago, Milwaukee & St. Paul Railroad. Other side is marked Store Dept. Key works. Body measures about 2-1/2" wide.

1922
Antique railroad RY EX. AGY (presumably Railway Express Agency) padlock was patented 11 21 05 and was made in USA. Measures 3-1/2" overall.

1923
United States Navy No. 2 Admiralty solid brass padlock was made by Jas. Morgan & Sons, measures 4" overall. Retains sliding keyhole cover and features four brass levers.

1924
Vintage No. 2 Tour padlock with key measures about 4-1/2" overall. Marking noted under 'No. 2 Tour' looks like a propeller.

1925
Unique whistle measures 4-1/2" overall and comes on a chain.

1926
English-made Schlitz beer luggage tag or fob measures 4-3/4" overall.

1927
Vintage Adams dissecting kit includes Justrite knife with sheath, scissors, tweezers, more. Kit measures approx. 7" x 4".

1928
US National Defense medal measures 2-3/4"; French WWI military medal pendant measures 1-1/2".

1929
Brass Winchester belt buckle measures approx. 1-3/4 x 2-1/2"; vintage Junkunc lock No. 606346 combination lock measures 2-1/2" with combo; other lock with key.

1930
1958 State of New Hampshire resident hunting & fishing licence - deer tag; 1959 and 1975 Pennsylvania resident fishing license buttons. Largest is 1-3/4" x 2-3/8".

1931
Bass Collector Series token includeing The Duel, Pursuit, Gotcha, Patience; plus 1962 Minnesota Twin schedule token sponsored by Minneapolis Savings & Loan; NRA, Bass Collectors and other tokens.

1932
Vintage compass made by W. & L.E. Gurley of Troy, N.Y. USA. Looks accurate and measures 2" wide. Spin stop button on side works. Neat piece.

1933
Heavy brass Natural Sine nautical / ship compass with level is 2-3/4" wide. Compass points north accurately. Lever on bottom moves levels. Hinges work. Very neat piece. No identifying markings noted except for chart on front.

1934
Vintage military compass by Keuffel & Esser Co. was made in New York and comes with a Dietzgen USCM (United States Marine Corps) leather sheath. Looks accurate. Measures 3" x 3-1/4". Latch works. Noted but unpictured is about half of the paint on back is chipped off, but overall wonderful piece. Peep hole on top lines up with mark inside of rim and across cover for accuracy of direction.

1935
Nice compass points north when it should and would be easy to throw in a pack. Measures about 3" long closed and is in good condition.

1936
Vintage Carac Alt Meter / barometer with case. Measures about 2-3/4" x 2-3/4" over case.

1937
Nice looking Pulsar Analouge quartz men's wrist watch with World Time, Alarm, Calender, Time and Chronograph. Comes with case and papers. Type Series WR (Cal. N94J). Face measures about 1-3/4" over edges. Scratches noted on back, and on clasp. Currently not running but may just need new battery. Attractive watch.

1938
WWII Schick Inc. US Navy stadimeter is marked on tag BU Ships Mark III Mod. -1942 and comes with leather case. Piece measures approx. 6-1/4" x 5" and looks in good condition.

1939
Century old French made wood encased compass works and measures about 3-3/4" x 3-3/4" over case. Wooden case is inscribed 'D.E.Dwyer Jr. June 1919'. Stabilizer button works and deploys when lid is closed. Wonderful piece of history.

1940
Antique compass in wooden case was made by W. & L.E. Burley of Troy N.Y. USA. Compass needle points north as it should, and all screws are intact. 3-1/2" x 3-3/4" wooden case is in good condition, if only it could tell us where it has been. Stabilizer button works and deploys when lid closes. Glass window with some chips noted around edges. Brass lock on front works. Unique calendar type chart reads right to left, then left to right.

1941
Antique Lewis and Clark, maritime, or surveyor's compass depending on who you ask. In good condition. Needle points north when it should, wooden case nice, stabilizer button deploys when lid closes. Measures 3-1/2" x 3-1/2" over case.

1942
Vintage Herter's No. 20 fishing fly tring vise with cast iron body was made in Waseca Minn. Measures about 5-1/4" over cast iron part. In good condition. Another in lot 1943.

1943
Vintage Herter's No. 20 fishing fly tring vise with cast iron body was made in Waseca Minn. Measures about 5-1/4" over cast iron part, and about 8-1/4" over whole thing. In good condition. Another in lot 1942.

1944
Antique Stanley Rule & Level Co, No. 72-1/2 Warranted folding Boxwood rule with brass fittings was made in Britain Conn. USA. Plus one other also made in USA. Stanley is in good condition - brass hinges are smooth, wood is good with no cracks noted and nice graphics on the inside. Both 24" long when opened. Other hinges also work and looks to be marked PAt' sPend.

1945
Durham Duplex razor was made in USA with a patent date Nov. 7 11; another straight razor with marking 'L West' and a Bakelite or similar handle. Both are in good condition and come with a vintage Durham Duplex Razor Co. case.

1946
Will ship without matches. Vintage Boy Scouts waterproof match holder is 3" tall. Rubber seal still soft. Neat piece would be great for the camping or bug-out bag.

1947
US Military issued compass made by Waltham. Very neat piece is in good condition - needle points north when it should, clasp works, brass case with minor wear as to be expected. Get it while you can.

1948
Brass desk sundial compass with wooden case. Compass face measures approx. 2-3/4" and overall, across feet approx. 5". Piece is in very good condition and would look great displayed on your desk or shelf.

1949
Leupold & Stevens Instruments Cruiser Compass looks to be from the 1950s or 1960s and comes with original box and pamphelt. Compass is 3-1/2" diameter and in good condition. Neat piece.

1950
Vintage Western Electric Bell System Talk & Monitor lineman's service handset complete with belt clip, pin dialer and line tap leads with alligator clips. Handset measures 8-1/2" overall.

1951
Antique Upson Nut Co. No. 84 and Stanley No. 62-1/2 boxwood folding rulers with brass fittings and hinges. Each is 24" long and in good condition - hinges bend smoothly and no cracks noted in wood, decent graphics. Neat pieces of history.

1952
Vintage Taylor brand sling psychrometer for measuring humidity comes with handle; plus another thermometer that measures 12-1/2" long and measures -40 degrees to 120 degrees.

1953
Miner's head lamp by Permissable Electric Cap Lamp was issued by the Dept. of Interior Bureau of Mines and was made by Koehler Mfg. Unit is complete with light, measures 7-1/2" x 5-1/2". Matching set, Lot 1955.

1954
Russian-made Moonlight 2/58 night vision NV-100 spotting scope by Zenit with soft case. Battery compartment has some corrossion salts and one AA battery is stuck in the bore. Unit appears otherwise very nice.

1955
Miner's head lamp by Permissable Electric Cap Lamp was approved for Canada EM&R Coal Mines, numbered 61L-2 and was made by Koehler Mfg. Unit is complete with light, measures 7-1/2" x 5-1/2". Matching set, Lot 1953.

1956
ProMaster 1100 Monopod wih case. Code 6778. Extends from about 21-1/4" to 67-1/4". In good condition, and is would be nice for traveling.

3002
This is an EXTRA lot, please do not bid on this.

3003
This is an EXTRA lot, please do not bid on this.


Auction License: 2370-052
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

Spring Sporting

Bennett Auction Service

Bennett Auction Service


Contact: Adam Kielsmeier
Phone: 715-657-0078
Sale Location
1403 RAILROAD AVE
PRENTICE, WI 54556
Sale Dates and Times
Sale Terms and Conditions

Listing Details

3000
EXTRA lot

3001
EXTRA lot

466
Hobart Handler 140 MIG wire feed welder. Runs either gasless flux core or solid wire with shield gas. See lot 524 for gas bottle and regulator.

524
Carbon dioxide bottle is 18" with valve. Comes with a Miller regulator. Bottle has 80 psi of gas, will ship empty. Fits Lot 466 and other welders.

393
No Shipping. 1 quart of Citgo Extra Range Motor Oil

394
No Shipping & must be 21 to purchase. Calvert Special Candian Rye Whiskey. Federal seal intact.

395
No Shipping & must be 21 to purchase. Beam's Choice "Beethoven" Kentucky Straight Bourbon Whiskey. Comes in original box. Federal Seal is intact.

396
No shipping & must be 21 to purchase. Beam's Ruby Glass Decanter comes in original box. Ph. Boilieux deluxe decanter of fine California brandy. Federal seal still intact

397
Two 30 round Magpul AR-15 magazines, Emag. Magazines are new, comes with dust covers.

398
Two AR-15 magazines and blackhawk pouch. Mags are Brownells and Bushmaster

399
30 round Magpul Emag AR-15 magazine and Blackhawk magazine pouch,

400
Perfectly violet lilac tea pieces incl 9" tea pot, three 2-1/2" tea cups with saucers and plates. Bottom is marked 'Tomina E-OH hand painted Nippon'. Some chips in the pitcher pour spout, one cup. possibly more.

401
2 Blackhawk AR-15 magazine pouches and a canteen jacket.

402
Harley Davidson analog wristwatch with black leather band, model no HDM100. Face of watch measures 1-1/2" and strap is 3/4". Watch winds but hopefully just needs a battery.

408
2010 GMC Sierra SLT truck, VIN 1GTSKWE33AZ149797 has 192253 miles and extended cab. Truck is in good condition overall. Runs and drives well.

403
Harley Davidson Motorcycles belt buckle, model no 99437-05Y and other skull with cross bones belt buckle and death angel ring, men's size 14.

404
Outdoor lamp and yellow construction sight light. Yellow light stands 14" tall.

405
Fantastic Plastic faux falcon to deter the little unwanted critters from your yard or shop. Falcon stands 16" tall. Currently mounted to 8" piece of wood for a quick hang on the side of the garage or shed. Hardware included!!

406
Cast Iron Silver Dollar Pancake Pan measures approx 9" across.

409
Cub Cadet Ultima ZT146 zero-turn riding lawn mower has a Kohler 7000 series engine. Mower is in good condition, hyrdrostatic drives and deck work as they should.

410
Winchester and other ear mufs, a Milwaukee Bucks Coors Light flag, and more.

411
Craftsman 19.2 volt drill/driver and angle grinder with a battery. Both tools run well and are in pretty good condition.

412
Craftsman 19.2 volt power tool set incl. 1/2" drill, angle grinder, a multi tool with quick detach blade chuck, a battery, and charger. All the tools run and are in good condition.

413
Stanley matrick and SAE chrome wrenches, and Stanley screwdrivers. Wrenches from 9mm to 14mm, and 5/16" to 11/16", see pics for completeness.

414
Craftsman 19.2 volt reciprocating saw. The saw runs, has a quick change blade, battery, and charger.

415
Two battery tenders with 1.25 amp charger or maintainer for 6 volt or 12 volt batteries.

416
Craftsman pneumatic 1/2" impact wrench, is model 875.191183, and is in good condition.

417
Stihl electric chainsaw, is model MSA 140C, in very good condition, runs well, comes with a battery, and charger. The saw has a 10" bar, fair chain, comes with an AK 30 battery, nice saw.

407
2002 Honday Odyssey mini van, VIN 2HKRL18602H590008 has 211,293 miles. Van is in decent condition and could use a good cleaning. Passenger interior door panel is missing and should be replaced. Runs and drives fine.

418
Craftsman laser tack sliding compound miter chopsaw. The saw runs, has a laser guide, runs a 7-1/2" blade, and is a nice little saw.

419
Craftsman 19.1 volt saw set incl. 5-1/2" circular saw, a reciprocating saw, a battery, and charger. Both tools run, the reciprocating saw has a quick change chuck, the curcular saw is missing blade bolt.

503
Craftsman Pro Series rolling toolbox. The box measures 52" x 21" x 42" tall, has nice brawer liner in most drawers, rolls smooth, nice latching drawers with good slides, good toolchest.

420
Craftsman 4-1/8" jointer / planer. The jointer has a 5/8 hp motor, a cast iron base, and adjustable fence. Measures 24" long overall, and comes on a 28" x 18" x 24" tall.

421
DeWalt 13" planer. The planer runs, has dust and chip collection, rough cut and finishing cut settings, takes up to 6" tall boards, comes with three double sided blades, and more. The planer has a chip out of the back of the blade well, is missing blade screws, the third blade keeper and the third blade. Nice machine with a little work.

422
Fishing pole rack, measures 48" tall and holds 18 rods.

423
Louisville 16' extension ladder, rails are pretty straight.

424
Werner 4' folding aluminum ladder, has a 225 pound capacity.

425
Extra heavy duty exrendable folding ladder with a 300 pound capacity. Stands 56" tall collapsed.

426
Louisville 8' folding aluminum ladder, the ladder is straight, sturdy, and has a 250 pound capacity.

427
Famous Trails metal detector, has an extendable arm, takes 6 AA's and appears to be in good shape.

428
Craftsman 9 gallon 3.5 HP vaccum / blower cleaner, comes with a length of hose and runs.

429
Cub Cadet brush saw, or weed eater. The Cadet BC280 has a 27cc 2 stroke engine, comes with two changeable arms, incl. a brush arm, and a weed arm, has papers, and extra string.

430
Pair of 6' long 9" wide metal ATV or similar ramps.

431
Craftsman hand cart, has some welldone repairs, and stands 43" tall.

432
4 foot tall spool of fencing, spool measures 10" in diameter.

433
Schumaker fully automatic battery charger or starter. The charger is marked Built 4 Starting with a 200 amp start setting, altornator tester, and battery tester. Charger does both 6 and 12 volt batteries. Unit powers up and is in good condition.

434
Schumaker fully automatic battery charger or starter. The charger is marked Built 4 Starting with a 200 amp start setting, altornator tester, and battery tester. Charger does both 6 and 12 volt batteries. Unit powers up and is in good condition.

435
Louisville 6' folding fiberglass ladder, is sturdy and tight, and in good used condition.

436
Chanellock pick axe. The pick axe has a tight 36" handle, and measures 15" edge to tip.

437
Seymore DG10 poste hole digger, has work polished handles, and fair shovels.

438
Shovels for evry season, Truper aluminum grain shovel, Suncast snow shovel, and a spade shovel.

439
Libman 18" shop broom.

440
NIB Avalanche snow rake, if you havent seen how these work go look it up. The rake has a 24" wide cut, is the deluxe 20 version, and is NIB. This makes raking roofs fun.

441
Truper sledge hammer with a tight 35" oak handle.

442
Double bit axe with a tight 28" handle.

443
Rolatape model RT312 rolling measure, has extendable handle up to 36" long, and counts and resets as should.

444
Three adjustable clamps up to 22" long overall.

445
Auto tint welding helmet with an awesome patriotic design. The helmet has adjustable sensitivity and tint.

446
Sturdy two step folding step stool, measures 36" tall overall when open.

447
Pruning and trimming lopers incl. Corona dual cut lopers, and Yardshark trimmers with extendable handles.

448
Extendable stick magnet, great for jobsite clean up. Extends to 39" long.

449
No shipping. Stanley framing square, 4' and 2' levels, more.

450
Two pry bars up to 36" long.

451
High lift ratcheting jack stands 4' tall and is great for off roading adventures. Raises and lowers.

452
We think this is a Hydro Steel type garden hose, shorter is approx 20' and longer about 45'.

453
Hydrosteel garden hose is approx 50' long with good ends. Lightweight hose is crush and kink resistant.

454
Hydrosteel garden hose is approx 50' long with good ends. Lightweight hose is crush and kink resistant.

455
Five and two gallon gas totes, both have spouts.

456
Pair of steel car ramps with a 6,500 pound capacity between the pair, stand 9" tall.

457
Stihl BGA 57 electric leaf plower with extendable spout. The blower is in very good condition, runs, comes with papers, a battery, and a charger.

458
Pair of steel car ramps, measure 36" long, and 9" tall.

459
Rustic weathered wooden box, measures 31" x 14" x 10" tall.

460
Five and two gallon gas totes, both have spouts.

461
Near new folding metal saw horses with a 5-1/2" x 34" top. Nice pair.

462
Igloo Island Breeze 48 QT cooler. The cooler is in very good condition, and measures 24" x 14" x 15" tall.

463
4-1/2" angle grinder attachments and consumables incl. flapwheels, cut off wheels, guard, more.

464
Two garden hoses, larger spool is approx 30" in diameter. Both hoses appear to be in good condition.

465
Craftsman 3 gallon 1 HP air sompressor with a 135 max PSI. The compressor appears to be in good condition, runs, and builds pressure.

467
Tow totes and storage containers incl. Rubbermade and others.

468
Pittsburgh racing 1.5 ton rapid pump floor jack. The jack raises to 10", might be low on fluid.

469
Country Pro 6.5 HP wood chipper with a Kohler 196C engine. The chipper shows little use, has a 20" x 12" hopper, and stands 43" tall overall.

470
Craftsman 27cc blower or vaccum, is in good condition, runs and blows, great for yard work this summer.

471
Central Machinery 12 ton hydraulic shop press, stands 54" tall, and has an adjustable bottom tray.

472
Craftsman variable speed rotary tool, comes with drills, drinding, sanding bits, and more.

473
Craftsman, Will, and other aviation shears.

474
Pliers incl. snapring pliers, slip joint pliers, needle nose, more.

475
Punches, cold chisels, and more incl. brass, and others.

476
Hyper Tough 4-1/2" mini circular saw, great for small jobs. Rus, and is in good condition.

477
Craftsman 4-1/2" angle grinder, runs well.

478
Skil jig saw with laser cut line. The saw runs, is model 4495, has quick change blade, three speeds, and low vibration.

479
Makita 4-1/2" angle grinder, is model 9557PB, runs, comes with guard, and wrench.

480
Stanley and other aviation shears and cutters incl. Fat Max and others.

481
Stanley socket and wrench set, comes with 1/4", 3/8", and 1/2" drive ratchets, and sockets. The kit has matric, SAE, deepwell and shallow sockets, nut driver, wrenches, more.

482
Ace and other plier, slip joint pliers, and clippers.

483
Stanley screwdrivers incl. phillips, and flat. Comes with a set of Force picks.

484
Large and small Stanley adjustable pliers, linemans pliers, more.

485
Stanley Fat Max adjustable pliers, side cutters, needle nose pliers, more.

486
Screwdrivers and other incl. Stanley, Will, and others.

487
Craftsman variable speed rotary tool, comes with buffers, drinding, sanding bits, and more.

488
Greenlee, Stanley, and other chisels up to 1-1/2" wide.

489
Vector por, Sure Built, and other screwdrivers up to 15" long.

490
Huge Duralast adjustable slip joint pliers, measure 17" closed.

491
Duralast 12 point half moon wrench set, and several other box and open end wrenches.

492
Gearwrench SAE ratcheting wrench set from 5/16" to 11/16".

493
Four Craftsman wood chisels, largest is 1" wide. Nice set.

494
Mack, KD, Napa, and other open and box end wrenches up to 1".

495
Craftsman almost complete SAE set up to 15/16".

496
Three pop rivet guns, and several containers of rivets, and washers.

497
Craftsman metric box and open end wrenches from 9mm to 19mm.

498
Stanley 1/4" and 3/8" sockets, deep and shallow, metric, and SAE. The set comes with two ratchets, a nut driver, and is mostly complete.

499
Genesis 9" band saw. The saw is in near new condition, still has the table sticker, good fully adjustable blade guides, a fence and miter gauge. The saw stands 29" tall, and runs smoothly.

500
Stihl AK 20 battery and charger for your Stihl mower, trimmer, chainsaw, or other Stihl electric power tools.

501
DeWalt 20 volt variable speed reciprocating saw, is model DCS381. Runs but does come with battery or charger.

502
Ryobi 10" adjustable speed bench top drill press, has work light and laser guide system. The drill press runs, is model DP102L, missing key, and laser system is not functional, probably the switch as it is hard to turn.

504
Five gallon gas tote with some gas, will ship without gas.

505
Campbell Hausfeld 11 gallon 4 HP aircompressor, runs and builds pressure.

506
Pair of rims by MB Wheels. They have a 5 x 4.5" bolt pattern, are marked 16 x 7, SR386 ET38, Vision 58M.

507
Harris carry-along torch set. Unit shows little use with torch handle still have the UL sticker and gauges still having the peel off vinyl shipping covers. Tanks are owned and partially full. Will ship empty.

508
Stihl electric chainsaw, is model MSA 120C, in very good condition, runs well, comes with a battery, and charger. The saw has a 10" bar, good chain, the battery is model AK 30, nice saw.

509
Black and Decker Workmate 400 folding contractor work bench vise. The table measures 29" x 24" x 31" tall as pictured.

510
Craftsman 3 HP contractor grade 10" compound miter saw, runs.

511
Herter's padded folding shooting stand. The stand is in very good condition, stands 38" tall when up, great for range days.

512
Ace wheelbarrow, has a 38" long metal bed, a good tire, and weathered but solid handles.

513
Craftsman 3/8" ID air hose, approx 50' long. nice hose.

514
Briggs and Stratton 15 gallon air compressor. The compressor is in good condition, runs, and stands 40" tall.

515
5-1/2' tall bandsaw, has a 10" throte, and a 6" tall max capacity. The saw runs, has a smooth motor, and comes with a fine and aggressive tooth blade.

516
Blackstone 28" propane griddle.The griddle measures 44" x 21" x 33" tall, shows little use, the lighter switch needs replacement or repair but otherwise in good condition.

517
Schwinn red waggon, measures 36" x 17", has an adjustable handle, and front and rear steering. and would be great for yard work or for the kids.

518
New Little Giant Xtreme extendable ladder, comes with paint tray bracket kit, more. The ladder is model 17, has wheels, leveler feet, nice ladder.

519
Delta 2200 PSI pressure washer with a 4.5 HP Honda engine, model GCV 135. The pressure washer comes with a wand, hose, and attachments.

520
Approd 40' or 12-2 with ground copper under ground feeder wire, and a new 5' spool of 14-2 copper wire with ground.

521
Black Jack 12 ton hydraulic bottle jack with case and handle.

522
Kobalt and Power Torque adjustable jack stands, each approx 11" collapsed.

523
Two spools of 14-2 with ground copper wire, and appox a 30' spool of 14-3 with ground copper wire.

525
Mr. Heater portable buddy heater, has a 20 pound propane tank hook up, is in good condition, and measures 13" tall.

526
Stihl hedge trimmer, is model HS 45, has a 20" bar, the tank is dry but turns over and has good compression, and is in good condition.

527
Two air hoses incl. 1/2" and 3/8", the longer read one has a 300 PSI max and is approx 45' long.

528
Fein Multi Master vibrating power tool, is model FMM25Q, appears to be in near new condition still with the power cord ties, runs and sounds like it means business. The multi tool has a quick tool-less bit schange, has several sanding and cutting bits, nice machine.

529
NIB Pittsburgh 1.5 ton aluminum low profile rolling floor jack. The jack has the rapid pump function.

530
Prime 100 FT 12 gauge extreme weather extension cord. The cord has light ends, and is NIP.

531
Igloo Island Breeze 48 QT family cooler. The cooler is in good condition, and measures 24" x 14" x 15" tall.

532
Job Smart 5 gallon 125 PSI portable air tank.

533
10 gauge extension cord with light ends, a 12 gauge extension cord, and a few others incl. a 6 outlet power strip.

534
Three Big Red 2 ton jack stands. The jack stands are in good condition, have a double locking system, and stand 11" tall collapsed.

535
Ridgid heavy duty 24" pipe wrench, has good jaws, and is straight.

536
Two adjustable bar clamps, each approx 28" long overall.

537
New 250' spool of Southwire 12-2 with ground copper wire.

538
Craftsman 20" lochable tool box with three drawers. The cabinet is straight and in good condition.

539
Little Giant 24" animal live trap.

540
Just over 2 quarts of Power steering fluid, and 1.5 quarts of Kubota UDT2 universal transmission hydraulic fluid.

541
Peak antifreeze and coolant, the green gallon jug is sealed, the other 50/50 mix is open but mostly full.

542
Master Electrician 50' extension cord with light ends, and a Yellow Jacket extension cord.

543
Approx 3 quarts of premium universal tractor fluid.

544
10' long length of 5/16" chain with two grab hooks, no rapairs noted.

545
Almost 4 quarts of 5W-20 oil, and about a quart of 5W-30.

546
Craftsman pneumatic set, appears to be new or near new. The kit includes 1/2" impact wrench, 3/8" ratcheting wrench, an air hammer, new hose, papers, and more. Nice set, comes in a 15" x 12" case.

547
Flex seal liquid and spray, WD-40, Minwax spray, more. NO SHIPPING.

548
Power Service injection cleaner - power improver, 50-1 and 40-1 ready to use 2 stroke gas, Armor All car wash, more. NO SHIPPING.

549
20 ton and 5 ton hydraulic bottle jacks, larger measures 10" tall.

550
Power strips, work lights, extension cords, more.

551
Automotive supplies incl. oil filter wrench, jumper cables, exhaust clamps, more.

552
Campbell Hausfeld air hose, approx 50' long, and has good fittings.

553
Comfort Zone floor fan, stands 24" tall and all three speeds work.

554
Two smaller cross peen hammers, and an apolstery tack hammer. The larger tack hammer measures 11" long.

555
Bostitch 1/2" drill / driver. The drill runs well, comes with two batteries, a charger, and is model BTC400.

556
Four Coleman all purpose propane one pound cylinders.

557
Union Butterfield drilling and tapping fluid, both containers are less than half full.

558
Vaper 30 oz. reusable sprayer, has a max pressure of 200 PSI, has something in it but will clean up nicely.

559
LEM electric meat grinder is model 1158, has a #8 head, has three attachments, and runs.

560
Two Klein Tools wire strippers, up to 16 gauge, and down to 28 gauge.

561
Rapala filet knife with sheath, Matco Tools folding pocket knife with a blade spring, a NRA folding knife, more.

562
Two speed squares, larger is 12".

563
Hobart .030 gasless flux cored wire feed welding wire, is E71T-11, one two pound spool, and one sample spool, both are unopened.

564
Stanley controll grip adjustable pliers, are models 84-024, and 84-034, larger measures 10" long.

565
Drill Doctor model 350X drill sharpener, comes with bit holder, papers, and runs.

566
Two pairs of B&G mittens, both are size large and new.

567
NIP Extidable telascop, measures 15" long extended, and comes in a carry case

568
NIP Extidable telascop, measures 15" long extended, and comes in a carry case

569
NIB Vaper 30 oz. reusable sprayer, has a max pressure of 200 PSI.

570
DieHard 6 and 12 volt battery charger & maintainer, is in good condition.

571
Chicago Electric auto tint welding helmet with adjustable delay, darkness, and sensitivity. The helmet comes in its original box and appears to be unused.

572
Husqvarna and stihl chainsaw bar covers, incl. 16" and 17".

573
Ace instant on propane torch, works. Will ship without propane.

574
Two NIP spools of Stringliner mason line, both has a 165 pound test, and 540 feet.

575
Evercraft 6" dual action pneumatic sander. The sander is in good condition.

576
Router with a 22,000 max rpm, 1/4" chuck, runs well, is model 7610, the only name on it is on Black and Decker on the cord.

577
Master Electrician 25 foot 12 gauge extension cord with light ends.

578
Ozark trail camping set incl. a single burner stove, and a 3 piece cookware set.

580
Two Curt trailer balls, the NIP one is 2", the other is 1-7/8", both has 3/4" shank, nuts, nad washers.

581
Craftsman 19.2 volt 5-1/2" circular saw. The saw runs, and comes with a new DeWalt 5-3/8" carbide blade.

582
Tack Force 6" bench grinder, has worklight, and very good bearings, and runs.

583
Craftsman 19.2 volt saw kit incl. 5-1/2" circular saw, reciprocating saw, and a larger 19.2 volt battery. Both tools run.

584
Dremel Saw-max SM20 rotary saw, is currently set up with what looks like a tile blade. The saw runs, and is in good used condition.

585
Drill press vice with 2-1/2" jaws, and a 2-3/8" opening.

586
Caldwell shooting supplies lead sled 3 shooting bench. The shooting rest is in good condition, and measures 27" long.

587
Set of metric Stanley box and open end wrenches from 7mm to 17mm.

588
Craftsman 19.2 volt drill, driver, and light set. The set comes with a drill, impact driver, a light, and two Lithium Ion batteries. All tools run.

589
Power Torque 1/2" drive 20 volt impact driver. The driver comes with a battery, charger, papers, and hard case. Nice tool, runs.

590
Skil 18 volt drill. The drill is in good condition, comes with a battery, charger, and runs.

591
Soft blow hammer, rubber mallet, ball peen hammer, more. Largest is 12" long.

592
Stihl power tool battery, is model AK20, has a 2.8 amp hour, and is 36 volt. Comes with charger, 17" long Stihl chainsew bar cover, more.

593
DeWalt DCS393 6-1/2" cordless circular saw. The saw is in good condition, is currently set up with a DeWalt fast wood construction blade, runs but dose not come with a battery. Comes with a 15" tool bag.

594
Black and Decker 7-1/4" circular saw. The saw is in good condition, and runs.

595
DeWalt 20 volt 3/8" right angle drill driver, and a LED 20 volt work light. The tools come with a charger a battery, and both run.

596
Klein Tools wire strippers, a 30 watt solder iron, solder, flux, triler light connectors, more.

597
Craftsman screwdrivers, Mayers square, Fiskars clippers, more.

598
Mostly Stanley sockets with 1/4" and 3/8" drives. Also comes with a partial kit of metric sockets.

599
Craftsman air hammer or air chisel, is model 875.191192, is in good condition, and comes with four chisels.

600
Stanley pliers incl. needle nose pliers, side cutters, and slip joint pliers.

601
Black and Decker 4-1/2" angle grinder. The grinder runs, and is missing guard.

602
Napa, Stanley, and other 1/4", 3/8", and 1/2" drive sockets.

603
Three Stanley 3/8" ratchets, and a Stanley 1/4" ratchet. Also comes with a set of SAE and a set of metrick hex drivers.

604
DeWalt, and Bauer 7" grinder and saw metal cut off wheels. Two saw blades, and five other wheels including a huge flap disc.

605
Stanley stud finder, ball peen hammer, wrenches, and a 24" prybar.

606
Grip air spray paint gun. The paint gun appears to be new or very little use, has a 1 quart cup, nice piece.

607
DuraMax rotary tool. The tool shows very little use, has adjustable speed, comes with all sorts of bits, and a cary case.

608
T handle and other hex wrenches incl. metric, and SAE, Titan, and others.

609
Several pairs of Vice-Grips, and other locking pliers up to 9" long.

610
Large hex wrench set up to 5/8", set appears to be mostly complete.

611
Headlight and other head lamps, lanterns, and a pair of knee pads.

612
Five Irwin C clamps up to 6" and down to 2".

613
Several pairs of C clamps incl. 6", 4", and 2".

614
GB and other cable ties or zip ties up to almost 15" long.

615
Grease fittings, automotive stethoscope, ctooer pins, adjustable oil filter wrench, more.

616
Welding and brazing supplies incl. Forney Fluxed bronze 3/32" rods, 6013 by 1/16" welding rods, Hobart .030 mig wire, more.

617
Cummins 24" metric and inch Varnnier caliper, and a smaller 4" caliper.

618
Craftsman 1/4" socket set incl. 6 point deep and shallow sockets.

619
Stihl chainsaw files, felling wedges, and Oregon files. The Stihl files are from 1/8" to 3/16".

620
Crecent and other adjustable wrenches up to 12" long.

621
Spade bits by Speedbore and others up to 1-1/2".

622
Craftsman Nextec vibrating multi tool. The tool runs, comes with a battery, charger, attachments, cary case, and charger.

623
Stanley tools up to approx 10-1/2" long incl slip joint, needle nose, adjustable wrenches; 16' tape measure; 7-1/4" pry bar, more.

624
6", 7", 8" sanding discs incl Ace, Master Pro, 3M, etc. Stick-on and other.

625
Tech 5000P vehicle jump starter / power bank / air pump with tips and cord to connect pack and pump. Power bank turns on, and has a 44.4 Wh battery capacity iwth LED flashlight. Made by SmarTech Products. Red piece about 9-1/2" tall with max 150 psi, runs. Peak current 500A (jump start).

626
Reese TwoPower Farm & Ranch trailer hitch with 1-7/8" drop ball and 2" raised ball. Fits 2" receiver. About 14" long, incl hitch pin.

627
Two new pairs of B&G split cowhide mittens, each size Large.

628
Crescent sheet metal shears, wooden Lufkin extension rule, Swingline heavy duty tacker, NIP metric hex wrenches, utility knives, more.

629
NIB Warrior 7" variable speed polisher / sander comes with two 1-1/2" thick sponge pads and more covers or bonnets. Warrior is 10amp, nice machine.

630
DeWalt, National, other drill bits, many HSS. Incl Craftsman drill case. Incl some intracate bits. Larger ones incl DeWalt 1/2".

631
Reese Tri Ball hitch with 2-5/16", 2", and 1-7/8" balls with a black nickel rust resistant finish.

632
Heavy duty Auto-Loading Cornwell Tools utility knife, Lufkin Ni-Clad steel tape measure, Bernzomatic torch head, GB wire strippers, needle nose pliers, 12' Stanley Powerlock tape measure, more.

633
Craftsman 1/2" pneumatic impact wrench is Model 875.168820. F / R, about 9" tall overall, in nice condition.

634
Two pairs of Stihl and Husqvarna felling wedges, three chainsaw files, more.

635
NIP. Progrip 27 foot long 10,000 pound ratchet straps with 2" straps, and a reversible function.

636
ITT cross pein hammer with a 15" fiberglass handle with a little play.

637
Stanley pliers and nippers up to 8-1/2"; plus a Stanley Power Lock 12' tape measure in good condition.

638
Needle nose pliers, side cutters, slip joint pliers, more.

639
Two Stanley heavy duty staplers, both work and come with several racks of staples.

640
Stihl and other trimmer line incl. .155" diameter twisted line, .105" diameter twisted, and others.

641
Near new Craftsman 1/2" pneumatic impact wrench is model 875.168820, has 3 forward settings, and is in very good condition.

642
Two brushblades for your weed eater, brush saw or similar. One blade has a 1" arbor, and the other is 3/4".

643
18" pipe wrench with great jaws, and a non-slip handle.

644
3/8" and 1/2" drive ratchets, and braker bars up to 17" long

645
Craftsman 3/8" drive pneumatic ratchet wrench. The ratchet is in good condition, and measures 12" overall.

646
Craftsman matric and SAE open and box end wrenches up to 13/16" and 18mm.

647
Makita 4-1/2" angle grinder, runs, and is model GA4530.

648
Craftsman commercial power plane, runs well, has papers, comes with extra blades, fences, more.

649
Lincoln 18 volt greese gun, is model 1800 power luber series B. The gun runs on low and high, and comes with a charger.

650
DeWalt 20 volt drill driver set incl. drill model DCD780, impact driver model DCF885, charger, battery, and bag. Both tools run well.

651
Esteing hatchet with a classick stacked leather handle. Hatchet measures 13" tall, and has a blade cover.

652
Black and Decker, Craftsman, DeWalt, and other 7-1/4" circular saw blades, new and used.

653
Penske timing light, overall good condition, the spark lead has seen the hot side of an exhaust manifold, but otherwise nice gun.

654
Coleman pripane lantern. The lantern stands 16" tall, and has a partial tank of propane. Will ship without propane.

655
Engineers hammer or mini sledge hammer, has a 16" handle with minimal play, great for forging.

656
Stanley tools incl. 25' tape, speed square, pick set, pry bar, more.

657
Stanley 1/4" socket set incl. metrick and SAE, two ratchets, nut driver, more.

658
ITT, Buck Bros, and other claw and rubber mallets, and hammers.

659
AIr compressor fittings incl. tire inflation, bloers, male and female fittings, more.

660
Craftsman SAE and metrick mini open and box end wrench set incl. 5mm to 9mm, and 3/16" to 7/16".

661
Diablo, 3M, and other adheaive and velcrow backed sanding dicks and sanding nets, most are 6".

662
Hack saw, hammer, face shield, pry bar, more.

663
Stanley heavy duty stapler, works, and three partial containers of staples.

664
Pruning saws, ribbed saws, and others, longest measrues 16".

665
Irwin bit driver, 6 and 12 inch extensions, and several bits.

666
Rotary tool bit kits incl. grinding wheels, cut off wheels, buffing wheels, diamond cutters, more.

667
Ratchet straps, and bungee cords, great for fastening your auction winnings.

668
Black and Decker 1/4 sheet palm sander, is model FS540, and runs.

669
Craftsman and other speed squares for your small and big projects. Larger square is 12" x 12".

670
Two Black and Decker drill / drivers, both run forward and reverse, one battery is very strong, the other dosen't charge. and come with two chargers.

671
Black and Decker heat gun, and a hand held blower. Both run, and heat gun heats.

672
Larin 4" swiveling bench vise. The vise has double swivel locks, good jaws, and is in good shape.

673
DeWalt DCG414 brushless angle grinder, runs both 4-1/2" or 6" disks. The grinder is in very good condition, has two quick adjust guard, a 60 vlot Flex Volt battery, charger, manual, and bag. Couldn't get the battery to take a charge, bring your battery to open house to test.

674
Pair of perfectly pink glass platters, larger measures 13-1/2" across. Smaller measures 12-1/2" across the handles.

675
Perfectly Pink glass fruit bowl and cookie plate to use for Easter this year! No chips noted. Bowl measures approx 12" across.

676
Free Range brand 5 gallon double wall poultry drinker stands approx 17" over handle.

677
Lid for a galvanized boiler and pieces parts of a meat grinder and 17" sharpening rod.

678
3-1/2 ft bow saw in good condition.

679
Adjustable single-handle hand truck folds up to a compact 3 ft. Manufactured by S&H Industries

680
Mercury Marine 6 gallon gas tote. Graphic is in fair condition.

681
Mercury Marine 6 gallon gas tote. Graphic is hard to read.

682
Medium animal live trap measures 29" long.

683
Red and White brand portable air tank. Measures approx 24" long

684
Metal tool box with locking clasps. One clasp is broken. Box measures 17" x 7-1/2"

685
Jiffy Fidmann ice auger with a 9" cut, and a Tecumseh engine. The auger turns over and has good compression but tank is nearly dry, has good blades, and a blade cover.

686
A trio of simple gun racks when all you need is a place to hang your rifle or shotgun. Largest measures 3-1/2" long.

687
Olive green wooden box with hinged lid measures 32" long x 16" wide x 13" tall. Some of the metal strapping needs to be replaced.

688
General Electric brand outdoor yard light. This is a biiiiiiig one! Measures approx 12" across the top.

689
Rusted metal bucket with chain and binder. Bucket stands 12" tall.

690
Reddy Heater 35 brand heater, 35,000 BTU, 3 gallon fuel tank, measures approx 30" long.

691
Pair of heavy duty black plastic storage totes, only one lid. Totes measure 28" x 19" x 15" tall

692
Wooden tool chest measures approx 35" x 16" x 13" tall. Lock removed. Removable tray inside with additional fixed state compartments.

693
Husky brand heavy duty plastic tool box or storage for the bed of the truck. This is a gem of a toolbox with wheels and a self-storing handle and hinged top pieces. In its most compact size it measures 25" x 16" x 15"

694
Weatherproof army green colored backpacking dry bag. Measures approx 24" x 15" x 8" deep. Multiple layers of closures, feels mostly waterproof.

695
Rodent deterrent plastic falcon to keep the yard and shed free from the peskies. Currently on some wood for quick application to the shed or garage. Falcon measures approx 13-1/2" tall. Wood adds additional 8"

696
Tipton brand "Best Gun Vise" to use as an extra set of hands for gun disassembly, gun cleaning, gun modifications, etc. Appears to be new in box.

697
Set of 4 Polar ice fishing tip ups to use while risking your life on the thin ice out there. Each measures approx 18" overall.

698
Green five gallon bucket with a trio of Polar Tip ups for what remains of ice fishing season. Tip ups measures approx 18" overall

699
A Pair of tackle boxes incl Plano 6300 filled with bait and lures and a brown metal tackle box just like Uncle had when you went fishing together. Plano tackle box measures approx 16" x 7" x 8"

700
Ultimate brand portable speaker or light three legged stand. Adjusts to different heights up to 6 foot 6 inches tall.

701
Pair of hard back gun cases. Longer measures 4 ft long and has one latch that can be tough to latch correctly; smaller is 3-1/2 ft long.

702
Coleman Powermate portable air tank, model no CL0551109, measures approx 38" overall.

703
Char Griller Professional Patio Pro griller and smoker, model no 1515, appears to be unused in box so some assembly required. Made of heavy steel. Just in time for spring and summer porch grilling and smoking!

704
Team Hornady bag with plenty of pockets for your stuff. Could be used as luggage for clothing or as an accessory bag for all your pew pews. Plethora of storage options incl the outer pockets and a velcro panel for interior of the bag to accommodate just about any contents.

705
Navy blue and gray camping tent, appears to be a 2-man tent. Incl folding tent poles and ground stakes.

706
Intricately carved walking cane and a small Old School Sports souvenir basbeall bat. Bat is 18" long. Cane measures 3 ft tall.

707
Five panels of camouflage burlap to wrap your hunting stand or create a hidden ground blind all contained in a rugged Rubbermaid Action Packer covered tote. Tote measures approx 27" x 18" x 12" and can be padlocked on both ends.

708
Set of four ammo cans measure approx 11" x 7" x 4"

709
Trio of military style ammo cans. Largest inside measurements are 5.8" x 11" x 7.2"

710
Ace Hardware grass whip measures approx 3ft long, small 16" bow saw, 10" tall oil can. All functional and ready to be used.

711
Homelite Texron Super 2 chainsaw with a 14" bar. The saw turns over and has good compression, tank is bone dry. Nice saw, comes with case.

712
Homelite Texron Super 2 chainsaw with a 16" bar. The saw turns over and has stout compression, tank is dry. Nice saw, comes with case.

713
Super Power model 540000, generator, runs 750 Watts, 6 Amps, Phase 1. Measures approx 18" long, and has a Kawasaki gas engine that turns over and has good compression but tank is dry.

714
Seven jointed and unjointed fishing lures, Rapala and other.

715
Ammunition brass and nickel coated cases incl. almost 100 pieces of .44 Remington Magnum, Somewhere around 100 pieces of .357 Magnum by Remington and others.

716
Plano over and under tackle box full of soft baits, sinkers, hooks, and weights.

717
Fishing season is coming, get it now before the stores raise the price! Stren, DuPont, Berkley fishing line in varying weights, hooks, sinkers, lures, scaler, more.

718
A few Heddon River Runt Spook Sinker, Jitterbug, other vintage woodel fishing lures and bobers. Some lures have glass eyes.

719
Vism Flasklight+ with integrated KeyMod mount. Flashight works, other parts untested. 4" long, comes with packaging.

720
Antique powder horn, cast iron scale, and a vintage giroscope. Powder horn is about 5" long and sratched on the side reads 1864 A.H. Pittsley, nice piece. Scale about 5" across base and isncl 3/4 of weights.

721
Snap Safe with keys could be mounted in your vehicle, closet, etc using the four holes on back made for that purpose. Padded nicely for a pistol or similar. Opens a little hard but definitely doable. Measures about 8-1/2" x 11-3/4" OD.

722
Plano 787 tackle box, a smaller12 box, and a 9-1/2" boat prop with a 3/4" splined hub. The boxes have some bobers, baits, lurs etc.

723
Will ship to qualifying state. Sixty round P-Mag D-60 rifle magazine fits AR15, M16, M4, HK 416, FN Scar, MK 16/16S, SA-80, M27. Comes with box, manual, sticker, cleaner. Can seat fully on a closed bolt.

724
Bulldog Vaults lock box with keys measures about 11-3/4" x 10" x 2-1/2" overall. Great for a handgun or similar. Incl two keys. Mechanical lock may just need batteries, as the buttons do not light up. Or, just use the keys.

725
Four open spinning reels by Quantum, Shakespeare, and others. All spin smoothly.

726
11 Reel Bait Bullet lures. Each is approx 3-3/4" long, and are NIP.

727
Aladdin Stanley lunchbos and thermos set. Thermos is quart size and stands about 14-1/2" tall; incl stopper and cup. Small dent noted on bottom. Cooler in good condition and measures about 14" x 8-1/2" x 7-1/2" overall.

728
Compact lock box with keys is ready to mount in your truck or nightstand. Two holes on back for that very purpose. Measures 6" x 8-1/4" and is in good condition with nice foam padding.

729
1953 Japy mess kit may be French Army, look it up and see for yourself. Measures about 5" x 7" over largest piece.

730
Aker right handed indide the waistband leahter revolver holster is about 5-1/2" tall and 6" wide. Model 140, also marked J-2.

731
Vintage wooden Blatz Beer crate is about 16" x 10-1/2" x 9-1/2" tall. Reads Milwaukee Wis. Decent graphics on inside of box, outer ones a little lighter.

732
NIP Boating Essentials Offshore 70 bracket mount marine compass.

733
Three sizes of Chicago Cutlery knives, perfect for home processing deer or beef. Longest about 15" overall. Knives are numbered 66S, 44S, other. Quality knives worth the investment.

734
Two Safariland Nylok pistol holsters 30-95 4051-383 and 28-95 4052-76. Larger about 8" x 6" over body, other about 8-1/2" x 4-3/4". Look them up to see if they fit your pistol.

735
Actron Auto Scanner Plus vehicle code reader for OBDII vehicles. Model CP9180 and comes with case, cord, and manual.

736
US Military leather pistol holster with suppressor and magazine pouches. Looks like it may be for a Walther P-22 or similar. Measures about 5-1/2" x 7-1/2" overall and has ties to secure to the leg. Nice holster.

737
Fobus Smith & Wesson paddle holster reads .357 and 2.5". Comes with packaging. Sticker on front reads All J-Frame .38, .357, Rossi 88.

738
Safariland belt handgun holster is numbered 19-01 and 4050-01. Measures about 7" wide overall and is about 4" over tallest body part. Look it up to see if it fits your pistol.

739
Safariland Nylok handgun holster is numbered 28-95 and 4052-76. Measures about 8" wide overall and is about 6" over tallest body part. Look it up to see if it fits your pistol.

740
Safariland Nylok handgun holster is numbered 30-95 and 4051-383 and comes with Thumb Break Hammer Strap Adjustment Key. Measures about 8-1/2" wide overall and is about 4-1/2" over tallest body part. Look it up to see if it fits your pistol.

741
Antique cast iron Enterprise fruit or lard press / sausage stuffer was patented April 10 1883. Handle and gears turn smoothly. Stands about 17" over top curve. Outfitted with a No. 25 Small Plate. Incl sieve in bottom. In good condition, would make a neat lamp base.

742
Uncle Mikes No. 5 Sidekick right handed holster is mounted on an adjustable Uncle Mikes shoulder strap. In good condition. Look it up to see if it fits your pistol.

743
Nice magazine holster is belt mountable horizontally or vertically. Measures about 4-1/4" x 5-3/4" with pouches about 1-1/4" x 3/4" x 3" inside, a mag about 4-1/2" tall would fit. In good condition.

744
Sig Sauer black open top concealment holster is 4-3/8" x 2-3/4" overall.

745
The Geogre Lawrence leather pistol holster is marked 24 and 570, look it up to see if it fits your gun. Measures 5-1/4" long and about 3-1/4" over widest part.

746
Safariland paddle holster is Model 568-01. Stamped S&W J 13 12. Paddle measures 6" x 5-1/4" tall. Holster about 4-3/4" tall. In good ocndition, incl wrench and Users Guide. Look it up to see if it fits your handgun.

747
Two canvas packs mmay be military. Plus what looks like an AK-47 or AK-74 cleaning kit about 3-3/4" long. One pack marked C.T.C. on top leather strap.

748
Handcrafted Barsony Leather shoulder holster. Holster itself about 8" x 3-7/8" overall OD. Adjustable straps about 1". In good condition.

749
Galco Gunleather underwrap belly band for concealed carry. Band about 4" wide and size XL 48-52. In great condition, incl packaging and papers. No. I129L.

750
Advanced Technology Fiber forestock fits AK-47, MAK-90, MAADI and other variants. CAA Israeli pistol grip, more.

751
German made Akah leather pistol / handgun holster is well constructed. Measures 6-1/2" down barrel side of leather. Frog marked Akah 2-96, near bottom of holster Akah 2-96 is marked. Looks like it's a German Military or Police holster. About 11-1/2" overall. Right handed. Look it up to see if it fits your gun.

752
Uncle Mikes double magazine paddle holster and a Safariliand right handed belt mount pistol holster about 5-5/8" tall and 3-7/8" wide overall. Paddle about 4-3/8" x 5", magazine slots 9/16" x 1-7/16" x 2-13/16" ID.

753
Bulldog Deluxe Black Mini Range bag is Model BD-917. Looks like new and measures 13" x 9" x 3".

754
Blue Stone Safety Products concealed carry ankle holster with packaging. Band about 4" tall. In good condition. Bag tag reads Ruger W/D-Ring A314D.

755
Pistol holster with magazine pouch has velcro side to store on the inside of your gun safe and save space. Measures about 7-1/2" tall and 3-3/4" wide OD not measuring clip pouch.

756
Keg spout is about 19" overall. Pump pushes air, looks to be in good condition.

757
Discharged grenade is marked RFX on side and stands about 4-1/2" tall. Top marked Fuze M228 MEI01J 018-013. Great display piece.

758
Bulldog Extreme ankle holster with packaging is Size 3 and fits most compact automatic pistols / handguns with 2-1/2" - 3-3/4" barrels (Taurus Millenium, S&W M&P Compact, 1911 Compact, etc).

759
Blackhawk Serpa Strike CQC Platform holster side is about 5-3/4" x 4-3/8" tall and in good condition. Designed to fit any Blackhawk T-Series�, Serpa� or Omnivore� holster at any angle. Incl three screws.

760
Tagua Gunleather posket holster for a Smith & Wesson Bodyguard 380 with laser or similar. Ambidextrous, neat holster in good condition. Measures 5-1/4" x 3-1/4" x 1".

761
Blackhawk CQC C1379 Serpa shoulder harness is size Large, Right Handed. In good condition.

762
Boker Magnum, Abu Garcia, Mossberg, other folding knives; plus a vintage 2-1/2" Bull padlock. Boker blade is tight and locks open, measures about 5-3/4" closed. Other two lock-back blade's also tight. Abu fishing multitool is about 2-1/2" long closed, perfect for the tackle box.

763
BK & Ka-Bar No. BK23 fixed blade knife with sheath, CRKT Ikoma Keydashi rounded knife with 2" blade and sheath, other fixed blade knife, two knives up to 12-1/4" overall ready to customize with handle slabs. Black knife about 6-3/4" overall.

764
Taigear holster set-up is about 12" x 6-1/2" over backing pad. Pistol holster is 7-1/2" tall and about 4-1/2" OD not measuring the magazine pocket. Other pocket for extra ammo about 5" tall. Great set up. Google to see if it fits your gun.

765
Seller notes this is an SKS Paratrooper spike bayonet; plus an SKS oiler or similar and a cleaning kit. Spike baynet is about 11" long, screw included. Oiler about 3" tall and in good condition. Cleaning kit looks unmarked.

766
UpLula 9mm-.45ACP pisotl mag loader / unloader with packaging.

767
Two Glock 21 and 41 magaazines are .45 ACP, 13 +1 round.

768
Four position pistol buttstock is 14-1/2" extended.

769
Foreign wooden baton with custom made Ray Sullivan leather holster in good condition. Baton about 2' overall.

770
Large machete with matching sheath was made in El Salvadore. Measures about 28" overall.

771
Awesome 81mm cartridge case is 22-1/2" tall. Side reads Smoke WP M375 W/ Fuze M524A5 For Mortars M1 and M29.

772
SKS bayonet, SKS muzzle brake, SKS or AK butt stock and cleaning kit. Cleaning rods, more.

773
Two Glock 21 and 41 magaazines are .45 ACP, 13 +1 round.

774
Military poeces and other incl double pack about 10" tall marked 1984 and more, belt with suspenders, other pack, ankle wrap, more.

775
Combat exchange all-weather synthetic rifle stock is 29.25" long.

776
Advanced Technology synthetic adjustable rifle stock appears to be for SKS or similar and measures 31" overall.

777
Two sings incl Mossberg and Hippies Use Side Door. Measure about 24" x 15" and 12" x 15".

778
Victorinox, Dexter Russell, Cozzini, other filleting and butchering knives up to 14".

779
Antique hand painted salt and pepper shaker set, sugar, other S & P, rosebud pieces about 3-1/4", much more.

780
Two cute teapots and a chocolate pot made in Austria. Two teapots are both in overall good condition with jstu some small chipping noted on spouts, pink one hand painted. Chocolate pot about 10" over lid. Pot could be a neat decoration up on a shelf. A few small ships noted on rim and spout, and lid has been repaired, see pics.

781
Antique handpainted covered pot, cream pitcher made in Germany; other pieces made in Bavaria, Japan, etc. Larger white dish 8" wide.

782
Large American flag may be a soldier's military funeral flag. Measures about 56" x 113". Good condition with just some discoloration or mildew noted that may just wash out. No holes or tears noted.

783
Caldwell Shooting Supplies rifle bipod clips onto front sling mount. Stands about 6" overall and extends to 9". Nice piece.

784
Two Western USA folding knives are Models S-531 and S-534. Brown handled one has trouble locking open, release button feels a little gummed up - may just need some oil. Measures about 7-1/2" open, blade is tight and so are fittings. Handle slabs good with one scratch noted but no cracks and a good fit. Black handled one locks open easily, bade with a little wiggle, handle slabs and fittings tight. Comes with leather Weastern belt pouch. Wipe them down, add a little oil, and enjoy these quality made knives.

785
Boker Model Bok608 specialty knife with sheath, plus Jaguar and other throwing knives with sheaths up to 6-3/4". Boker nearly 6-1/4" long.

786
Ka-Bar 1300 folding utinsel knife with belt pouch, great for the survival pack or camping. Knife locks open, all fairly tight, measures 3-3/4" closed.

787
Remington 12 gauge slug barrel is 20" and has adjustable rifle sights. Bore is bright.

788
Caldwell Shooting Supplies XLA rifle bipod is the 9" to 13" model. Spring loaded legs, detaches and attaches to gun using the swivel stud. Padded front. Comes with packaging.

789
Two Ruger Mark pistol magazines, one has a chrome bottom, the other has the Ruger insignia in the bottom.

790
Telescoping baton with belt clip extends to 16". In good condition, nice piece.

791
Communist rifle oil & solvent bottles, one with Chinese characters.

792
Havalon Knives set incl 5-1/4" long handle and four blades up to 6" overall; great for the hunting pack. In nice condition, comes with carry case.

793
Smith & Wesson Bullseye hunting knife set with belt sheath. Knives incl 6-1/2", 9-1/4", and 11" overall. Great set.

794
Glock No. 78 tactical or field knife with hard plastic sheath. Made in Austria, measures 11-7/16" long overall.

795
Large survival knife with storage space in handle for matches and a small compass (compass included). Comes with belt sheath or case. Knife measures 14" overall.

796
G4 Falcon extendable spear style knife is marked Renegade Tactical Steel. Extends from about 13-3/4 to 17-7/8" long. Comes with sheath.

797
Polytech 30 round AK-47 magazine, measures 9" long, appears unused and is marked Poly China.

798
Polytech 30 round AK-47 magazine, measures 9" long, is in good condition, shows some use, and is marked Poly China.

799
SKS detachable magazine, measures 9-1/4" long, and appears unused.

800
U.S.A. Magazines SKS detachable magazine, measures 10" long, and shows little use.

801
SKS detachable magazine, measures 10-1/8" long

802
AK-47 magazine, measures 10-7/8" long, shows use but is in good condition. 40 round?

803
Unissued AK-47 magazine, measures 11" long, shows little use and is in good condition. 40 round?

804
Unissued AK-47 magazine, measures 11" long, shows use but is in good condition. 40 round?

805
Hand forged cleaver with nice custom leather belt sheath. Cleaver about 9-1/4" long.

806
Vortex Sparc red dot scope is for Speed Point Aiming in Rapid Combat, or perhaps helping to get your deer. Incl extension piece. Currently does not turn on but may just need new battery. Measures 3" long and would look stellar on your AR-15.

807
Vintage Western fixed blade sheath knife, most likely a Bird & Trout hunting knnife. Marked Boulder Colo., Made in USA, Patented. Measures about 6" long. Blade, fittings, leather handle rings all tight.

808
Pair of folding straight razors. Dark one hand crafted by Tom Anderson, other is a Timber Wolf. Eack locks open with no blade wiffle, and they feature liner locks. Measure about 4-1/2" and 5" overall closed.

809
Antique brass lapel compass was made in West Germany. Measures 1-1/4" wide and about 2-1/2" long.

810
Smith & Wesson H.R.T. front eject knife. Measures nearly 7-3/4" when opened. Glass breaker knob on other end. Blade is tight and springs out nicely. Lock works. Marked SWOTFB.

811
Tac-Force Speedster Model folding clip knife is an impressive 13" opened. Blade is tight, liner lock also tight. Clip rather loose, tighten up. Handles good.

812
Two Fury A three angle fixed blade knives, 9-1/4" Azan throwing knife, 5-1/2" keychain defense tool. All knives with sleeves. Fury pieces No. 60009 and measure 7".

813
Quality Grohmann DH Russell fixed blade knife with leather sheath. Knife looks new and is 10-1/4" long. Inscription on blade commemorates 20 years as an employee of Wausau Window & Wall Systems. Other side of blade reads Canada.

814
BK & Ka-Bar Model BK-16 Becker Short Drop Point fixed blade knife. A modestly sized field knife perfect for belt or pack carry. Includes a MOLLE compatible Cordura� sheath and an extra set of brown handles. BK16HNDL micarta handles will fit the BK16. Rockwell hardness 56-58. 20 degree edge angle. Made in USA. Measures about 9-1/8" long.

815
SOG Ace fixed blade stone finish outdoor knife with textured sheath and original packaging. Measures 8-3/4" long, nice knife.

816
Hundereds of pieces of brass incl mostly .30-30 Winchester, a handful of .44 Remington Mag, possibly other.

817
12" Glock Pistols sign and a Beware of Owner sign about 10-3/4" tall. Both in good condition.

818
USA made compact flashight and a Park lighter. Flashlight about 5-1/2" long, batteries not incl. Cracks noted on lens, neat display piece. Lighter wheel spins freely, about 2-1/4" tall.

819
DVDs incl The American West, Unlocking DaVinci's Code, Trans-Siberian Orchestra, Ben Franklin, Beyond The Law, more. Three cases I checked complete.

820
Mixology & Craft whiskey set incl to 3-3/4" glasses, pair of slate type coasters, chilling cubes, Whiskey Cards, more. Box 8-3/4" wide.

821
Pair of camo ammo cans are marked SCF. Seals are still soft, cans measure about 10" x 4" x 7".

822
NIP Harley Davisdon passing lamp moulding kit, Sun Pro Super Tach II, NIP Accel Performance spark plus wire set for Harley Davidson, 15" bracket for license plate or similar.

823
Rite Edge Forged Series Bill Hook machete with box is No. HS-4426. Measures 16-1/4" overall, nice handle slabs are tight. Incl sheath.

824
Awesome collection of animal skulls up to about 4-1/2" long. Incl bird and possibly squirrel.

825
Cast iron wall-mount match safe with lid is 7-1/4" long and in good condition.

826
Bushnell 7-21 power 40mm binoculars have Insta-Zoom and come with case. Binocs focus and are bright. Three lens covers incl. About 6" long and has tripod mount.

827
Antique Craftsman breast drill features two wooden handles and is 17-1/2" long. Turns easily.

828
Uncle Mike's Sidekick vertical shoulder holster is size 4 Scoped, holster about 15" long over top side of rim. Look it up to see if it fits your pistol. Right handed.

829
Gun rack for your pickup, and a utility hanger for SUV's and RV's. Each about 12" long.

830
Uncle Mike's Sidekick vertical shoulder holster is size 13 Scoped, holster about 18" long over top side of rim. Look it up to see if it fits your pistol. One black piece not marked Uncle Mikes. Right handed.

831
Two antique Fuller Brikarier mason's brick mover tools. Each about 16" long.

832
12" Glock Pistol sign and a NIP Glock Perfection 12" wide license plate.

833
Harley Davidson Motorcycles clip knife made by Zippo, Harley pins, Canadian dollar coins, more. Knife piece about 2-3/8" closed.

834
Harley Davidson Motorcycles Heritage Softail Franklin Mint Precision Pocket Watch with eagle stand and belt mount sheath. Watch has chain nearly 14" over end hook. Currently not running but may just need new battery. Official licensed product. Stand about 3-1/2" tall, watch about 2" wide. Another in lot 836.

835
Two sets Homak 8" parts organizers.

836
Harley Davidson Motorcycles Heritage Softail Franklin Mint Precision Pocket Watch with eagle stand. Watch has chain nearly 14" over end hook. Currently not running but may just need new battery. Official licensed product. Stand about 3-1/2" tall, watch about 2" wide. Another in lot 834.

837
2-1/4" wide military belt 30" long; other belts, straps, knife sheaths, dog collar, 5-1/2" carabiner, more.

838
Folding and tactical knife sheaths incl Gerber, more. Longest about 13-1/2".

839
Real Keen 11-1/4" cleaver and a smaller 6" cleaver. Handle slabs tight on each.

840
Belzig Knives Rostfrei fillet knife with sheath. Knife measures 12-1/8" long. Handle slabs are tight.

841
Heavy duty machete is 18" long with 11" blade. Wrapped handle for a more comfortable swing.

842
MTech USA folding clip knives have thumb studs for a quick open. Measure about 8" and 8-3/4" open. Smaller blade a little wiggly when open, other is tight. Nice knives.

843
Tactical sling for AR15 rifle or similar. Strap is 1-1/4" wide and in good condition, adjustable length.

844
BK & Ka-Bar Becker BK-2 Companion tactical fixed blade knife comes with hard sheath or scabbard, box, papers, sticker. Sturdy knife measures 10-3/4" long and is in nice condition. Box reads different Model No.

845
McNett tactical utility knife with hard sheath or scabbard, Fury folding knife with cleaver type blade, very long serated folding knife, 4-1/2" Elk Ridge concealment knife with sheath. McNett about 6-3/4" overall.

846
Two folding fillet knives incl Schrade Cutlery First Production Run with belt pouch, and Ridge Runner knife. Each have wooden handle slabs; lock back works. Blades with little wiggle. Handles nice. Measure about 12-1/2" and 13" long open.

847
Four animal skulls up to about 6" long. Seller notes red fox, porcupine, racoon, bobcat.

848
Boker Plus Besh wedge neck knife and a Cold Steel 'The Spike' fixed blade knife. Each with scabbard. Measure about 7-1/4" and 8-1/8" long. Blades and handles tight. One sheath Secure-Ex.

849
Black Panther No. 064 fixed blade knife with scabbard was made in Solingen Germany. Measures about 10-3/4" long overall. Knife with tight fittings, nice piece.

850
Buck Knives Paklite Fieldmaster kit incl larger 141 knife, smaller 135 knife, and a 499 guthook ring; plus nice 9" sheath with belt mount, removeable liners, and two zipper pockets for waterproof matches and other necessities. Longest knife about 8" long. Incl paper. Very nice set.

851
Two CRKT Folt's Minimalist concealment knives with scabbards. Knives each about 5-1/4" long and in good condition, Models 2387 and 2386.

852
We believe this is an Italian M1870 sword bayonet that was arsenal-shortened for later reissue. Blade is marked FG in an oval and on the barrel mount fitting 'G 8009'. Measures 14-3/8" long overall. Blade, fittings, handle slabs tight. Leather frog is soft and marked 6/73K.

853
Antique WWI Era Swiss Military bayonet is about 16-1/2" long. Blade reads Waffenfabrik Neuhausen, and barrel mount fitting is marked 275604. Blade, fittings, and handle slabs are tight. Button moves easily, not frozen in place. Neat piece of history.

854
Henry Rifle sign is 12" x 15-1/2" and in good condition.

855
Is this a German K98 bayonet for Mauser rifle or a Yugoslavian bayonet? Regardless, it comes with a nicer-than-most scabbard and frog. Serial numbers on bayonet and scabbard match. Blade reads Npeay3ere 44, presumably 1944 WWII manufacture. Barel mount piece marked 12134 on one side, with another marking on other side. Scabbard also marked with a matching 12134. Measures 14-3/4" long overall. Blade, fittings, wooden handle slabs are all tight. Button moves. Scabbard in good condition. This is a very nice piece, possibly unissued.

856
Police style telescoping baton is 16-3/4" opened and comes with Bianchi belt sheath. Closes to a compact 6-3/4".

857
Vintage Marble's No. 2 safety hatchet was made by Marble Arms & Mfg. Co. of Gladstone Mich. Head and handle slabs tight. Very shallow chip the size of a ball point pen tip on one top corner of handle slab, but no cracks noted. Head measures about 4" long and axe is nearly 11" long. Nice hatchet may clean up with a little steel wool.

858
Awesome Rapala fsih grabber / scale looks pretty heavy duty and is about 10-1/2" long.

859
Pair of MCM locking ammo boxes are stackable and measure about 13-1/2" x 9-1/4" x 4-3/4" ID. In good condition. Would also make great emergency boxes in the truck.

860
Two dual mag couplers or holders, will fit your FA-MAS, M16, AR-15, XM, AK-47, AK-74 and G3 mags.

861
Super cool tactical cane comes apart into five sections, three of which have knife blades. Top handle with glass breaker knob. Bottom pad also screws off to reveal small post. In great condition, about 38" long.

862
Chicago Cutlery and other knives come in a wooden Gerber knife block. Plus a 14-3/4" Chicago Cutlery knife sharpener. Longest knife is about 13-1/2". Also incl 'Gaucho' knives by Adcraft.

863
Wooden Canvasback duck decoy is ready to finish, incl eyes. Measures about 12" long and is in good condition;

864
Large Tasco 8-32x44 rifle scope is bright and clear. Measures 20" long. Incl lens covers, great for elk hunting out west.

865
Chicago Electric VS rotary tool comes witha variety of Dremel accessories incl sanding drums, cutting wheels, more. Incl case for tool and bits. Smels a bit like brushes, runs.

866
Four HDX organizer boxes have removeable trays and customizable compartments, great for fishing tackle or precision shop work. Largest about 11" x 9" x 2".

867
Neat collection of aminal skulls, Seller notes snowshoe rabbit, porcupine, skunk, etc. Longest about 4-3/4".

868
Several Chicago Cutlery knives, plus a few others in a nice knife block. CC bread knife about 12".

869
Awesome children's tool kit incl 11" saw, wrenches, hammer, screwdriver, more. Plus several wooden guns. Great kit to get the kids into the life skill of a handyman.

870
Antique knives and forks by the Atlantic Cutlery Co. have bone or antler handles. Knives about 9-3/4" long, forks about 7-1/2". Nice pieces.

871
Several pairs of warm winter socks feel like wool.

872
Nice Zwilling J.A. Henckels 7" butchering knife was made in Solingen Germany and is about 12-1/4" long overall. Numbered 31118. Quality knife.

873
Four Chicago Cutlery knives great for processing your own deer or beef. Longer ones about 13-1/2". Quality knives. Numbered 78S, 66S, etc.

874
Two military style canvas packs with leather closures measure about 9" x 7".

875
Three canvas bags, most or all military. Pair of ammo pouches (possibly British) each about 10" tall, roll about 17" x 17" when laid flat. Markings incl C.W.L 1988, 1986, Touch Ammo Left, RFDPP 1984, more.

876
No shipping. DuPont Ho-Skor 700-X smokless powder can partially full with contents. Weighs 5 lb, 5 oz.

877
Zaplight stun gun by Zap is Model ZAPLT. Comes with box, cord, manual, case. Flashlight and stun part both work. Measures about 6" long.

878
Neat leather bag would be great for taking to the range. Plus a wooden box about 22" long. Bag about 15" x 9" x 9", neat piece. Box smells strongly and could be cleaned out.

879
Husky tiered rolling tool box or similar is in nice condition and measures approx 14" x 25" x 16" tall. Lockable, handle extends, another in lot 880.

880
Husky tiered rolling tool box or similar is in nice condition and measures approx 14" x 25" x 16" tall. Lockable, handle extends, another in lot 879.

881
US Military trunk or locker was made by Economy Mfg Co. Measures about 32" x 16" x 13" high not measuring handles. Handy storage, US printed on outside with wording inside as well.

882
Greenheck wall or heater mount fan has a General Electric 1/4 hp motor. Comes with frame measuring 20" x 20". Runs.

883
ATV seat is about 36" x 18" x 12" tall overall. Storage compartments in arms and back, plus cupholders and more. In good condition.

884
Bushrag Camouflage Systems size XL / XXL ghillie suit. Sleeves with adjustable elastic closures, zipper works. In nice condition, lining is good with no tears or holes noted.

885
Penncraft brand lockable tool chest with loads of storage for all of your Bennett Auction tool winnings. Includes keys and measures 17-1/2" tall x 20" long x 8-1/2" wide

886
Assorted cane fishing poles appear to make 3 poles. Each section is about 4-1/2 ft long. Darkest pole is from Kmart.

887
Two pieces of camofalge cover nettting, grat for deer blinds etc.

888
Four Mossberg gun rifle holder rack for the back of your truck seat or similar. The racks measure 25" tall.

889
Storage case for US Military Night Vision Goggles, model no AN/PVS-7A. Marked US Property and MFG by 55311.

890
Two pairs of Mossberg long gun holders or racks for the back of your truck seat or similar. The racks measure 25" tall.

891
Two camo blankets, and three sleeping pads.

892
Legacy Quest Outdoors wooden framed prints of a flag and portion of the 2nd amendment. Appears to be an NRA sponsor gift with 14 smaller US flags on sticks. Frames measure approx 17-1/4" x 13-1/2"

893
Wooden crate marked "Made in Russia" on front and side marked Knoxville, Tennessee, USA Intrac Corporation Small arms ammunition, consumer commodity. Outermost part of crate measures 19" x 14" x 6"

894
Pair of hard back gun cases. Black one has padding cut outs and features a rich looking crushed velvet interior; Brown gun case has eggshell padded interior and a couple of stickers on the exterior.

895
Trio of small coolers for your summer outings. Pair of Igloo lunch pail coolers for those quick little day trips; also a larger Thermos brand cooler. All 3 contain two ice packs within. Largest cooler measures 16" x 10" x 12" tall.

896
Stack-on brand locking gun cabinet for the storage of your 2nd amendment items, valuable currency, etc Includes keys and measures approx 21" x 10" x 18" tall.

897
Stack-on brand locking gun cabinet for the storage of your 2nd amendment items, valuable currency, etc Includes keys and measures approx 21" x 10" x 18" tall.

898
Iraq War era 9mm ammo can from another country, look it up. Both latches with holes for a lock, and overlapping eyes on front for a third lock. Measures about 20" x 12" x 8" overall.

899
US Military Vietnam War era insulated food cooler incl one compartment. Made by Knapp-Monarch Co. and in overall good condition with scuffs as to be expected. Measures abou t21" x 10" x 16" tall overall. Retains hinges. Neat piece of history.

900
Pair of hard plastic rifle cases. Blue American Spirit Arms measures 4 ft long; black DoskoSport case measures just over 4 ft long. Both have eggshell padded interiors.

901
Lever-style weed and small root puller. Measures just over 4 ft long

902
Pair of vintage macrame plant hangers are approx 3' long when hung straight.

903
Pair of retro macrame plant hangers are about 3' long. Some fraying noted, with wooden bead accents.

904
Marcame is coming back! Two totally retro plant hangers are about 5' and 6' long overall without pots in them. Neat pieces.

905
Down Under cotton oilskin trenchcoat, great for wrenching on cars or forging. Size XL, Style 8300. Comes with extra piece to extend the collar.

906
US Military Army Air Force insulated flying pants. The pants are type A-10, and size 42 and a 30 ish inch inseam. In good condition with a couple small holes noted on upper part of leg.

907
250 lb Howe storekeepers scale is of ornate cast iron construction. Measures approx 2' wide, 1-1/2' deep, and 2-1/2' tall.

908
Impressive elk antler rack, measures 33" wide inside the tines at the widest, and 29" tip to tip of the main beams.

909
Four matching Grote 5371 tail lights with brackets, great for your trailer or flatbed truck.

910
Drywalling or mudding tools incl. 12" puddy or mud hawk puddy knives, tile tools, screen sander, and more.

911
42 lb countertop scale by Buffalo Scale Works is quite delightful and will clean up well. About 1-1/2' long.

912
Plano Side by Side tackle box full of soft baits, lures, spoons, and more.

913
Pair of hard gun cases with locks. Black rifle case measures just over 4ft long, smaller green case measures 22" long.

914
Argon gas bottle is 17" with valve. Comes with some gas, will ship empty.

915
Attractive wine rack with door to put in your cellar or to start your collection of favorite local wines. Door on rack can be locked to keep out the sister-in-law. Rack stands 4-1/2ft tall.

916
Every home gym needs a punching bag! This Classic Canvas brand is 100% cotton shell. Includes the hanging chain to start working out right away.

917
Henry Repeating Arms brand neon clock measures approx 20" across x 6" deep. Clock mechanism runs. Neon tube is broken near one end but definitely worth fixing. These were allowed only to certain qualifying Henry dealers and are uncommon if not rare.

918
Pair of vintage The Arctic Fisherman brand ice tip ups. Probably a bust if you want to use them yet this year unless you live in the Arctic, but get them now and be ready for next year. Measure approx 23-1/2" long and made in Beaver Dam, Wisconsin.

919
Pair of NIP insulated ponchos feature aluminum coated interior for warmth. Package indicates 6 ft arm span and 5 ft length

920
People Meat Packing Co metal sign measures 16" x 10"

921
Scary black blow dart gun measures 43" long. Some minor finish imperfection on the length of barrel.

922
Vintage leather and wood horse hames with brass hardware made into a western style mirror. The mirror measures 32" x 19".

923
Get you a sauerkraut mandolin! This kraut cutter is 25" long. Some minor surface rust on the blades. Stamped T&D Mfg. Co, Indianapolis. Made in the USA.

924
Pair of Crimson Trace metal signs measure approx 17" x 11" One features language from the second amendment.

925
Rugged Mathie-Ruder Brewing Company brand wooden box with metal strap details. Measures approx 15" x 12" x 10"

926
Magpul 60 round AR-15 or M16 magazine. The Gen M3 PMAG has 60 round 5.56x45 or .223 cartridge capacity, and appears to be new. Fits several makes and models, see pics.

927
Get your emergency kit beefed up with these Wise Company brand freeze dried pasta alfredo with chicken. 5 years past the best by dates but packages are completely sealed.

928
Pelican 1300 Case measures 11" x 10" x 7" Foam is in nice condition.

929
Mitutoyo shock proof caliper that reads up to 6". The caliper is in good condition and comes in a case.

930
Bait and Tackle to toss into your fishing tackle box incl NIP Eagle Claw hooks, NIP South Bend brand Nylon Leaders, NIP Smithwick Rattlin' Lure, assortment of Mepps hooks, variety of sinkers and NorMark brand fish knife, more

931
6 unopened packages of Wise Company freeze dried meals in a mylar bag. All bags manufactured in 2012. Those with listed best by dates have expired but bags feel sound.

932
Pair of Fiocchi Ammunition boxes measure approx 11" x 5" x 7" tall

933
Quick Fire Cases glock case holds 2 glock pistols. Nice locking handles. Measures 11" x 10" x 5"

934
Two pairs of advertising carving kits incl. peerless knives pattented 1983, Steinecker's, J.J. Walker, WM.J. Straka Funeral Director, more.

935
Bernzomatic two burner propane stove measures 16" x 10" x 7" tall. Very nice little vintage burner.

936
New in Package HFS brand 2 in 1 Brake Bleeder and Vacuum Pump Test Tuner Tool Kit, model no 11896.

937
7 unopened packages of Wise Company freeze dried meals in a mylar bag. All bags manufactured in 2012. Those with listed best by dates have expired but bags feel sound.

938
Pair of Fiocchi Ammunition boxes measure approx 11" x 5" x 7" tall

939
Sweeney's brand Mole Trap appears to be NIP. All Steel construction.

940
6 unopened packages of Wise Company freeze dried meals in a mylar bag. All bags manufactured in 2012. Those with listed best by dates have expired but bags feel sound.

941
Pair of canteens for your hunting trip out West or Up North. Both feature a nice insulated bag that can be clipped to a belt or a strap carry.

942
Pelican 1400 Case for your handguns. Interior foam is in great condition. Case measures 14" x 12" x 6"

943
94" Adventuridge brand Extra Long Folding Table appears to be in good condition and comes with user manual.

944
2 pairs of men's snow pants. Green pair of snow pants are constructed of a canvas-like material perhaps military?? and lined with a removable insulation layer. No brand markings but tag reads C 56 and is stamped 1978 ERLA. Black pair are RefridiWear brand and size XL? They measure 23" straight across with a 30" inseam. Heavy duty metal zipper and buttons when they made those things well.

945
Wilson's leather brand men's black insulated leather jacket, size L. Leather is a little worn in high contact areas and is overall a little stiff but still lots of road miles in this jacket.

946
Prorider brand women's black leather vest. Size 46. Also includes a black Victoria's Secret brand black leather backpack style bag with fringe. Bag measures approx 14" tall.

947
8 Rapala and other fishing lures incl. lures up to 4-1/2" long.

948
Gamehide brand insulated camouflage overalls. Size 4X. Style number W28. 2-way double end front zipper as well as hip to ankle zippers.

949
Pioneer Wear brand brown leather vest. Size 44. Some imperfections in leather throughout.

950
Stearns brand boating vest, type III, size Adult Large. Khaki colored with pockets and Black Stearns ski vest, type III, size adult unversal

951
Pelican Hardback 1080 hand gun case and Doskocil hard hand gun case. Doskocil has foam layers to hold multiple guns. Smaller Pelican case measures 14" x 10" x 2-1/2" and has a long, strong locking mechanism.

952
A large variety of soft plastic lures and some Screwtail grubs NIP.

953
Plano Gun Guard pistol case measures 14" x 9-1/2" x 4-1/2" tall. Interior foam is in great shape.

954
Large assortment of ice fishing gear incl poles, NIP Trilene and Cajun Line fishing line, additional NIP Gudebrod Ice Line, more

955
Classic "bad guy" firearms and weapons training poster; tube contains "The story of a government that almost didn't happen" and a parchment replica copy of your Bill of Rights.

956
SmartLights snowflurry light for your LED light show and a string of Remington shotgun shell lights. Snowflurry light appears to be NIP.

957
Pair of Pelican brand hand gun cases. Larger case is a Pelican 1200 and seems to have replacement foam pieces inside. Smaller case is 1120 and appears to have original foam pieces.

958
Drago brand bag for all your things that need to be organized like maybe your reloading supplies. A pair of hand gun cases and a camouflage rifle case.

959
Up North style coffee table with glass top measures approx 4ft long x 2ft wide x 19" tall. Has a drawer to display your favorite pew pews and includes a nice section of green velvet fabric to stage your display perfectly.

960
Check out these Smith & Wesson mats for your reloading setup, sighting in practice, or for your man cave. Largest measures 17" x 11"

961
Very neat vintage rucksack backpack could possibly be Swiss Army? measures approx 22" tall. Feels waterproofed and leather is slightly stiff. Very cool piece.

962
Double bit Wedgeway axe, stamped Morley Murphy Hardware Co, Green Bay. Axe handle is tight.

963
Coleman brand folding table to set up at hunting or fishing camp. Measures apaprox 4ft x 2ft.

964
Extra Long Folding Camp Table appears to be in good condition and measures 8 ft long

965
Extra Long Folding Table appears to be in fair condition and measures 8 ft long. Some minor rust spots? on edges

966
Extra Long Folding Table appears to be in good condition and measures 8 ft long

967
Homelite 15" cut weed whacker is about 4-1/2' long. Untested as the tank is dry but engine has compression. Sometimes the older ones run longer than the new ones!

968
Set of 4 large ratchet straps up to 2-1/2" wide with custom trailer rail ends.

969
Black tactical mesh vest. No name brand found. Guessing adjustable up to a men's XXL? Made in China.

970
Hiking pack frame with some military parts, and a 3' long bag. The aluminum frame measures 20" x 12".

971
Brigs & Stratton Elite Series portable generator with a 10 HP Brigs and Stratton OHV engine. The generator has four 120 volt outlets, and a 120 / 240 volt outlet. Fires up, runs well, and all four 120 outlets work, 240 volt untested.

972
MacGregor baseball / softball umpire's mask and a pair of size 11-1/2 Men's Lange ice skates. Bottom of skate boots are marked PD4 00657. Some blade rust.

973
Assortment of spinner fishing baits. Most measure approx 2-3" wide

974
Spotted trout wall mount is 24" long.

975
Small, metal 3-drawer organizer with super cool looking finish. Measures 12" x 10" x 9" overall. Each drawer is about 2" deep.

976
Large 30-drawer organizer measures 36" x 20" x 12" deep. In its previous glory it was used as office supply storage and most recently as ammunition storage.

977
Equipto brand 18 drawer hardware organizer measures 34"x 11" x 13-1/2" tall. Has a few pieces of bonus hardware to get you started.

978
Aluminum food funnel and hand crank Squeezo brand food grinder. Perfect for making homemade applesauces, baby food, and more

979
Atlanta Stove Works brand, no 60, cast iron pot belly stove. Needs a little elbow grease if you want to use it, ready to go if you want to use it for decoration. Stands about 30" tall.

980
Nice variety of vintage buttons on button cards and loose.

981
Pair of 2 man crosscut saws ready to hang on the antiques wall or turn into your newest craft hobby. Longer is 66" overall. Both appear to have original wooden handles.

982
KLH speakers, model no 403A and Roadmaster 2 way speakers, model no RTS2000TM. One Roadmaster speaker has a dent. See pictures.

983
1970 Wisconsin Highways map, Illinois and Iowa maps, vintage Walther League booklets, short wave station list and Radio station markers book, others

984
Coleman Xtreme large ice cooler for all of your beverages and a handy wooden seated metal chair to take along with you.

985
4-1/2 ft long crosscut saw appears to have original wooden handles. Would be a beautiful piece to paint on or display as is.

986
Team Glock banner with grommets on edges and corners. Measures approx 5-1/2 ft long.

987
Cameron's stovetop smoker, 16" electric patio grill, Apollo 12v cooler / warmer, and a Crock Caddy slow cooker bag. Smoker about 14" x 10" id and comes with recipes. Car cooler about 13" x 7" x 10" tall and comes with cords, cools and heats. Bag in good condition. Grill heats.

988
Coleman Powermate VP201 air compressor with hose. Runs and develops low pressure but seems to need some work.

989
Two matching Zebco Dura Action two-piece fishing rods with Zebco 202ss reels. All eyes intact. Some small nicks in cork and foam, nothing major. Measure 66" long.

990
Washer toss yard game, each box is 16" x 16".

991
St Croix fishing rod with a Copperhead reel. 25SP-66MD. All eyes intact. Some minor imperfections in cork. Measures 6'6"

992
Nice Frabill Speed Shak Cub ice fishing shanty. Base is about 5-1/2' x 4' wide.. Features Arctic-Armour fabric,. In nice condition, a couple pipes not inserted for pics and one looks bent, but shanty is definitely useable without. Dual hole system in floor. Buy now for next year.

992A
4' pickup truck bed storage bag, about 20" high and 7" deep. All in good condition.

993
Pressed wood wardrobe stands about 4ft tall x 3-1/2ft wide. Needs a little drawer bottom work but would make a great little girl's dress up play closet.

994
NIP? Six Flags Battle Blaster Sting Ray pool toy, kids compound bow and arrows with practice tips, and NIP TimeIt brand Outdoor Mechanical Photocell Timer. Six Flags ticket coupon in the pool toy are probably expired :)

995
NIP Johnson Tangle Free Series Model TF10 fishing reel, plus Shimano, Zebco, and other Johnson reel.

996
Whitetails Unlimited brand fixed blade knives in a black canvas belt sheath. Longer knife measures 9-1/4" overall.

997
NIP Champion brand Duraseal Crow Spinner Target, model no 40949, is ready for you to practice your shot. Crow measures 7" tall.

998
NIP Browning RMEF fixed blade knife, marked model 780RMEF, and black canvas belt sheath.

999
2 pairs of blaze orange Remington neoprene gloves, sizes M & L. Pair of Stabilicers brand traction soles to strap onto your shoes to keep yourself upright on ice. Size M; pair of duenorth brand heel traction aids.

1086
NIP Bass Pro Shops floating pliers, Trilene 8lb partial roll fishing line, other Stren and Berkely fishing line, Weller lure, soft baits, more in a metal box about 11" x 8" x 4".

1087
Full or mostly full 100 piece box of Hornady .270 cal 100 gr spire point bullets measure .277 dia.

1088
Full or mostly full 100 piece box of Hornady .30 cal 110 gr round nose bullets measure .308 dia.

1089
Full or mostly full 100 piece box of Hornady .30 cal 110 gr round nose bullets measure .308 dia.

1090
Full or mostly full 100 piece box of Hornady .270 cal 100 gr spire point bullets measure .277 dia.

1091
Three vintage folding knives, plus other pocket knives. Names incl Sabre, Imperial, Hammer Brand USA, Evans, more. Longest about 3-3/8" closed. Some nice looking handle slabs in good condition with no cracks noted.

1092
Lyman T-C tungsten carbide resizing die for decapping and resizing cartridges for reloading. Comes with box. End of box reads 38 SP. 357 Mag. Measures about 4-1/4" long overall.

1093
Sentry 1100 fire resistant lock box with keys is great for a handgun or important papers. Measures about 12" x 7-1/2" x 3" ID. In good condition.

1094
Will ship without liquids. Airhead water tubing air pump with different nozzels, and a Hoppes No. 9 rifle cleaning kit. Both in good condition. Pump plugs into car and measures about 4" tall.

1094A
Southwire Seatek Series Roto-Split cable splitter measuring 7-1/2" long and in very good condition,

1095
Nice Hen & Rooster Special Production Run 1 of 200 fixed blade knife with sheath and box. Knife measures 10-5/8" long overall and is in good condition - blade, bolster, antler like handle slabs all tight and handles with no chips or cracks noted. Comes with matching leather sheath in great condition. Spanish made with German - Stainless marking.

1096
Daisy Powerline 880 pellat air rifle in .177 cal. Pumps and shoots, measures about 38" long overall. Nice Daisy squirrel scope. Stocks in good condition, great gun.

1097
Ten pieces of 1988 50BMG military brass cases. Heads are stamped IK. .

1098
Vintage Crosman Model '338 Auto' air pistol BB gun with original maunual, NIP Crosman Pellgunoil, Co2 cartridges, several bbs. In good condition. Measures about 8-1/2" long. Vintage manual in great condition. Gun brand from the Coleman Co.

1099
Coleman hatchet features nail puller notch on head and a non - slip handle. Measures 4-3/4" over head and is 13" long.

1100
Seller notes 120 pieces of Lake City 1968 brass.

1101
Lyman or similar reloading powder dispenser is 10" tall and in good condition.

1102
Vintage leather Shepler cowboy boots and a pair of Vibram combat style boots. Vibams in good condition with minimal wear, size 3-1/2W, about 10-1/4" over bottom, tag in tongue reads Altama. Shepler boots size 8-1/2D, Good Year soles, about 13" tall. Show some frayed threads and wear, but look like they have been recently conditioned.

1103
USBP (United States Border Control?) tie clip marked Sterling, vintage Jon-E hand warmer made by Aladdin Mfg. Co.; really cool Permanent Match lion lighter in good condition; several lighters incl Symbol, Austrian - made Champ, other; vintage Boston Lead Pointer box with good graphics, more. Hand warmer about 3-1/2" long. USBP clip about 1-5/8" long and weighs 6.7 grams.

1103A
Vintage Gillette Black Tip Super Speed safety razor is date coded W2 and made in the USA. Knob turns nicely and flaps open. Measures about 3-1/4" tall closed.

1103B
Vintage Nimrod Pipeliter was made in USA and measures about 3" long closed. Lighter sparks, neat piece.

1103C
Classic jaintor's "Key - Bak" key holder by Lummis Mfg. Co of Pasadena 8. Calif. Chain pulls and retracts, belt mount piece about 2-1/2" long. Buy and start using, sturdier than many pieces made these days.

1104
Vintage Zippo lighter, Peterson's art deco pipe lighter, other pipe lighter about 4-1/4" long. Peterson's about 3-5/8" long overall, whell siezed up but may be easy to fix. Other pipe lighter wheel turns but no spark, top piece near clip turns to increase or decrease flame. Zippo with three strikes on either side of marking on bottom and made in Bradford PA USA .

1105
Antique and newer fishing reels on a couple of vintage rods. Reels incl Bronson No. 2200 Green Hornet with heavy line, Atlas 1708 Model D by Kalamazoo Tackle Company, Zebco No. 33. Rods incl two-piece 65C6 six foot Spincast, and a sturdy Actionized steel rod about 5' long with cork handle. All eyes on rods intact. All reel handles wind smoothly, green one about 4" wide over handles. Great for the collection or for decoration at the cabin.

1106
Can ship without rod. Vintage Penn 9 Level Wind open reel on a sturdy 88" one - piece fishing ro with cork handle. Reel is outfitted with heavier line and measures about 5-3/4" wide over handle. Retrieve to Free Spool lever works, and ratcheting to silent switch also works; handle spins nicely. Mounting bracket marked 3ON-9. Rod in overall good condition; eyes are intact, cork fair to good, reel tightening nut is two piece and spins smoothly.

1107
Vintage St. Croix Tournament Fifteen Hundred No. 63-265 two-piece fishing rod was made in the USA. Measures 79" long overall. Eyes intact, string wrappings good with just one slightly fraying above top of bottom eye (see pics), cork good for age of this rod. Reel tightener screw moves easily. Great collectible rod.

1108
12" x 9" box of .223 Remington brass, and Winchester .45 Auto brass as pictured. Incl boxes. Reload for your AR-15 or similar.

1109
Nice climbing tree stand has a goot platform about 33" x 19" overall and a top portion with cushion seat. Black part of cushion with some mouse chews, replace or use as-is. Nice stand overall with backpack style straps for easy carry and clamp with knobs to hold it all together.

1480
No shipping and must be 21 to purchase. Full 1977 McCormick Elvis bourbon whisky decanter / music box is sealed and comes with original box & COA. Piece stands 15" tall, music box works.

1481
No shipping and must be 21 to purchase. Full 1977 Aloha Elvis McCormick whiskey decanter with tax seal intact and music box. Stands 16" tall, comes with original box and COA. Music box works.

1482
No shipping and must be 21 to purchase. Full 1977 Elvis Presley McCormick whiskey 'Elvis Presley 55' decanter is the 2nd in a series. Comes with original box, music box and COA. Decanter is full, tax seal in intact. 14-1/2" tall. Music box works.

1483
Ezra Brooks and Weston Springs Distilling Co. empty decanters. Stove stands 10" tall.

1484
Vintage serving pieces including lazy susan with five sections, measures 14" diameter - includes center piece with lid. Stemmed condiment server and a heavy glass candy dish with lid, a few chips noted. .

1485
Belgian made tapestry depicting a Middle Eastern scene measures 57" x 19".

1486
Vintage Oshkosh reindeer candle in original packaging. two Saalfield coloring books, vintage coaster set with original set.

1487
Vintage children's records including Jim Along, Josey; several Peter Pan Records, Happy Birthday record with sleeve; Mid-1970s Playsong records; yellow Disney records.

1488
Antique books including Cup of Gold, Tortilla Flat, Of Mice and Men - copyright 1937; others. Most by John Steinbeck.

1489
Vintage books including A Physician in the House, copyright 1897, back cover is detached; plus six published by Collier with mulitple short stores - copyright 1940.

1490
Framed silhouette is 12-1/2" tall; pair of vintage flower prints and two mountain scenes.

1491
Agfa Ansco Shur Shot box camera; five boxes of Polaroid film for The Swinger Model camera.

1492
Antique pocketwatch chain is approx. 13" long; Swiss made Remington wristwatch face, winds, runs and stops; Anson money clip; tie bar and two patriotic flag pins.

1493
Vintage Allster Knife Co. folding pocket knife; Urham Uplex razor; badger hair and other shaving brushes; styptic pencil by Walgreen Company; more. Straight razor handle slabs in good condition. Knive handle slabs are tight, 3-1/2" closed.

1494
No shipping and must be 21 to purchase. Full Jim Beam Bobby Unser Gurney Eagle racing car decanter, tax seal is intact. Decanter is 20" long overall and comes with original box.

1496
Antique straight razor with box; badger hair and other shaving brushes; Ever Ready and other clippers; 7" Cornell comb; Weck folding hair shaper, missing pin.

1497
Vintage souvenir postcards from Florida, Wisconsin, Minnesota, Washington, possibly others. All unwritten.

1498
Vintage souenir postcards - only one written, postmark 1945. Depicting Navy and several cartoons - all look to be the same vintage.

1499
Vintage postcards from Northern Wisconsin, plus US Naval Training Station, Great Lakes.

1500
Vintage postcards including cartoons, postcard books from Portland Oregon, Fargo, North Dakota, Bad Lands and more.

1501
Vintage cartoon-style postcards, all unwritten.

1502
Vintage cartoon-style postcards, all unwritten.

1503
Large and small grease guns with Marine and trailer, and other Grease, chimney brush, ladder or similar hanger, more.

1504
Blue Ball jar, Danish oil, GE radio, a bail top jar, more.

1505
Fly fishing reel, two open spinning reels, and a pair of enclosed reels.

1506
11 jigsaw puzzles up to 500 piece.

1507
Stanley tape, Ryobi countersink, rubber mallet, ratchets, and more.

1508
Stanley and other screwdrivers, nut drivers, and pliers.

1509
Sturdy wood duck house, measures 11" x 12" x 21" tall. Hole measures 4" diameter.

1510
Craftsman screwdrivers, nut drivers, pliers, Vice Grips, more.

1511
Brass anvil, measures 4" long, vintage hardware, rivets, more. Wll ship without matches.

1512
General brand drill grinding attachment, model no 825. Includes instructions and original box.

1513
Black & Decker 7-1/4" circular saw, model no 7359, 10Amp, 5300 RPM. Runs.

1514
Plumb brand axe measures 18" overall. Axe head is tight.

1515
Assortment of hand saws incl Stanley Handyman saw, hacksaw and a bow saw. Stanley measures 30" overall.

1516
That'll buff out! Car polisher stands 8-1/2" tall and buffing head measures 9" across. Runs.

1517
Weller soldering gun, model D-440, has a spliced cord but otherwise in good condition, and heats.

1518
Claw hammer and ball peen hammer. Claw hammer head needs to be tightened a bit. Peen measures 14" and claw is 13" long.

1519
Black & Decker and Skil brands jig saws. Black & Decker model no 7580 and 3 Amps; Skil model no 81497 and 3.2 Amps. Both tools run.

1520
Schumacher 6/2 Amp Dual Rate Battery Charger has a small amount of tape on the cord where the cord was nicked. Perfect for your old tractor and old submarines.

1521
Black and Decker, and other drills incl. a right angle drill, and a regular drill. Both tools run.

1522
Black & Decker 7-1/4" circular saw comes in a fantastic orange metal locking box. Cord appears to have been repaired. Runs.

1523
Variety of hand tools incl an Arrow T-50 staple gun, a couple of adjustable wrenches, T15 bit driver, Stanley line level, more.

1524
Seller notes 500 pieces of .308 Winchester brass.

1525
Seller notes 1000 pieces of .308 Winchester brass by Federal.

1526
Seller notes 500 pieces of .308 Winchester brass.

1527
Seller notes 500 poeces of .308 Winchester brass by Federal.

1528
Seller notes 500 pieces of .308 Winchester brass.

1529
Seller notes 500 pieces of .308 Winchester brass.

1530
3 pieces of Creekside brand camouflage rolling luggage. All 3 pieces measure approx 21" x 15" x 8" All zippers appear good and functional. One suitcase has a broken piece on the front. See pictures for detail.

1531
Large purple tote and metal tool box. Tool box measures 20" x 9" x 9-1/2" tall.

1532
200 pieces of .308 brass ready for your reloading projects.

1533
400 pieces of .40 Smith & Wesson brass made by Federal all set for you.

1534
416 pieces of .40 Smith & Wesson brass made by Winchester ready for your reloading

1535
200 pieces of .308 Hornady brass ready for your reloading projects.

1536
Sony LBT-D250 Compact Hi-Fidelity Stereo System with detachable wire speakers. System has 5 disc CD player, cassette tape deck and radio capabilities. Comes with remote and antenna.

1537
Sanyo 3 disc CD player, cassette tape deck, and radio system with 4 detachable wire speakers. Also comes with a remote and typewriter tape.

1538
Vanner Power Group SineWave Inverter, model no IT12-1600. According to sticker on device, it is a land/recreational vehicle power inverter. Unit measures 16" x 14" x 8" and includes attached mounting brackets.

1539
Double basin stainless steel sink measures 32-1/2" x 18-1/4" with 9" deep wells. 3-1/2" drain openings. Appropriate for drop in and undermount installations.

1540
Delta Pro truck bed tool chest / storage box measures 60" wide at shortest width and 70" across at the longest width. Box has 17" total height.

1541
18 puzzles up to 300 pieces, cross word puzzles, more.

1542
10 spring clamps, Irwin pipe clamp top jaw, hammer, file, level, and more.

1576
Husky 1/2" bracker bar, is 15" overall, a Husky 1/2" speed wrench, and 1/2" extensions up to 10" long.

1577
A large variety of hex key wrenches incl. Allen and others up to 9/16".

1578
Assorted wrenches, many sizes and conditions.

1579
Plethora of screwdrivers for your toolbox. Most are regular flathead screwdrivers.

1580
Nice collection of box end wrenches incl. Husky, Blackhawk, and others up to 1".

1581
Two NIP sets of Rockwell High Speed Jointer Knives, no 37-659 for a 6" jointer.

1582
Pair of toolboxes for your garage or truck. Black Hyper Tough brand 19" includes removable organizers, missing latches, and green metal Park brand is pretty rusty but still usable

1583
Nut driver sets, most are marked U.S.A. The black andeled set appears to be complete.

1584
Sockets incl. 1/2", 3/8", and 1/4" drives. Largest socket is 1".

1585
Assortment of adjustable wrenches and a trio of adjustable pliers, Master brand padlock and keys. Largest wrench is 10" long.

1586
Sockets incl. 1/2", 3/8", and 1/4" drives, 1/2" to 3/8" conversions, most larger sockets are by Allenite. Largest socket is 1".

1587
Nice variety of hand tools to toss into your toolbox incl hacksaw, Stanley utility blades, pry bar, putty knife, Red Devil brand drywall mud knife, 3M electrical tape, Hole Saw Mandrel with 5/16 Shank, more

1588
Sockets incl. Armstrong, Wright, Industro, and others, largest socket is 1-1/4".

1589
Portable Propane Convection Heater in box, adjustable heat output up to 80,000 BTU, push button ignition. Made in the USA. Heater runs but flame is yellow. Needs some tuning or work.

1590
Nice selection of Williams and other phillips and flat head screwdrivers and hex nut drivers. Longest screwdriver measures 13" long

1591
Plethora of screwdrivers incl. Oxwall insulated electricians scrwedrivers, and others in a variety of sizes.

1592
Smith's brand Unbreakable Ceramic Sharpening rods to sharpen all the knives in your arsenal.

1593
Cast Iron Tea Pot would be great for decoration. Measures 10" wide.

1594
Assortment of hand saws, Pop rivet tool, Lufkin folding ruler to measure up to 72" and more.

1595
Indestro Select brand ratcheting wrench set. Largest measures 10" long. Sizes 1/4" - 15/16". Nice set.

1596
Nice selection of phillips and flat head screwdrivers, longest screwdriver measures 11" long.

1597
Milwaukee, Black and Decker, and other drills with 1/2" and 3/8" chucks. All run.

1598
Box end wrench set up to 7/8" neatly packaged for the tool box. Made in U.S.A.

1599
Wiss and Pexto tin snips, larger pair measures 11" long and both are in good condition.

1600
Pair of Durbin Durco Midget chain binders measure 11" from handle to pin.

1601
Husky 1/2" bracker bar, is 15" overall, a Husky 1/2" speed wrench, and 6" extension with 3/8" drive.

1602
Pop rivet tool, model K110, for the DIY riveter.

1603
Ridgid 18" pipe wrench with a straight handle, and good sharp jaws.

1604
Husky 1/2" drive speed handle, and two 1/2" extensions, longer is 10" long.

1605
Black & Decker 12A leaf blower and vac with components. Model BV6000, runs up to 250 mph. Sucks and blows. Measures about 42" long over nozzel as pictured. Notch cut out of handle.

1606
Wilson's Leather brand men's insulator leather jacket, size M. Leather appears worn on high contact areas.

1607
Unique yellow enamel plate and covered bowl, green coffee mugs and a ginormous enamel coffee cup for the serious coffee drinker.

1608
Nylint dump truck and Tonka concrete mixer truck like you had as a kid.

1609
Stanrite brand sign and display easel set, model no 350.

1610
"The Essential Whole Earth Catalog" and "LSD: Still with Us After All These Years" books for your enjoyment. Super-de-duper interesting.

1611
Aircare 1041 Super Wick. See pictures for compatibility

1612
Fostoria or Indiana Glass flame pattern candleholders would make for gorgeous table decoration. Each stand 8-1/2" tall.

1613
Hobby Train Transformers and General Model Railroad reference ruler, no 1251, Ho, N, and S Gage Scale.

1614
50/50 wooden crate measures 18-1/2" x 11" x 10

1615
Set of 4 Casters, Bright Ring Shank Drywall 1-3/8" nails (less than quarter full), 8D 2-1/2" deck nails (less than quarter full), and 3/4" galvanized roofing nails (nearly full), more

1616
A huge assortment of hand tools, mostly combination wrenches, some open wrenches, files, hoof nippers, more.

1617
Nice variety of metric and SAE combination wrenches up to 1" and 22mm.

1618
Stanley screw drivers, Ace hex nut drivers and more. Longest screwdriver measures approx 13" long

1619
A plethora of Craftsman and other drill bits for your workshop toolbox, 7" NorZon grinding disc, pair of adjustable wrenches, more.

1620
Two pipe flaring kits incl. two clamps and holders, and a Blackhawk pipe cutter.

1621
Totes adorbs Babco brand fine thread 3" bench vise marked 603 with nice grab, Lufkin 50 ft tape measure and electrical wire stripper. Vise jaws measure 3" wide.

1622
Screwdrivers and a little more, both Phillips and regular head, and a couple of Torx drivers.

1623
The best "kid's" toys ever! Weller solder gun, model Standard 7200, with additional soldering tips, pair of Weller brand wood burners, model SP-23, and other.

1624
Framed Pabst Blue Ribbon advertising print.

1625
AC Oil Filters sign.

1626
Brinkmann Smoke 'N Grill

1627
Old-style fuel filters with catchpole.

1628
New, unused 26 quart soft side cooler will hold 36 cans and measures 18" x 10" x 12".

1629
Double bit axe head

1630
Drywall tools.

1631
NRA duffle bag is in good condition.

1632
To be updated

1633
Bow saw

1634
To be updated

1635
Pick axe, singe bit axe head and a replacement Aztec hickory handle.

1636
Two engine starters. The first shows little use and turns by hand, feeling about like a new starter should. No. 050368 and 012721. Second starter shows more use and turns by hand a little harder, No. 041365 and 061019. Are these Kubota?

1637
Two Kubota fuel filters, NIP. Two heavy steel brackets No. 20827961. Another cast iron piece approx. 6" square.

1768
Very nice Schwinn 470 Journey 4.5 elliptical is in great condition. Comes with manual.

1769
Schwinn Airdyne exercise bike is in great condition.

1802
Game calls including Lohman Deer Model 33; Faulk's Crow Call; another call.

1803
8" and 10-3/4" J. Marttiini filet knives with matching sheathes.

1804
Vintage Weems Wild call for fox, wolves, cats comes with original box and paper.

1805
Long range fox call by Bunham Bros., Perfect Squirrel Call and Perfect Deer Call by P.S. Olt, and Primos Power Owl call.

1806
Gerber knife sharpening stone with leather sheath measures 8-3/4" closed.

1807
8" and 10-3/4" J. Marttiini filet knives with matching sheathes.

1808
Gerber Mini-Magnum leather knife holster with Gerber sharpening stone measures 8-3/4" long

1809
Three leather belt mount ammunition holders made by Hunter and Eubanks. Hunter is numbered 538-12 and measures 7" long. Other two are numbered 130-06 and measure 10-1/4" long.

1810
Die cast Amoco 1950 gas pump replica coin bank. Box is 11" tall.

1811
Handcrafted duck decoy type ashtray base was made by the Grand Rapids Carvers of Michigan and is outfitted with a Hyalyn No. 771 tray. Tray in good condition. Wood also in pretty nice condition and would shine with a little wood oil. Base measures about 13-1/2" x 7-1/2".

1812
Four pocket watch chains or fobs, up to 17-3/4". One swivel link is marked Radio, other gold toned swivel link is marked L&R, pearl accent chain's swivel hook is marked Numium.

1813
Die cast Ertl 1932 Ben Franklin Limited Edition Ford Delivery Van coin bank with key is 6-1/2" long overall. In good condition.

1814
Diecast Ertl 1913 Ford Model T Pet Milk Van coin bank with key. In good condition, with just some slight scuffs noted on one side. About 6" long. Box looks appropriate but label on bottom reads a different model.

1815
Ertl Collectibles Texaco Petroleum Products 3443 Ford Tri-Motor Racing Champions airplane is about 12-1/2" over wingspan. Die cast, Issue #7. Comes with key and is in good condition.

1816
Die cast Ertl United Van Lines 1917 Ford Model T Van coin bank with key. In good condition and measures nearly 6" long.

1817
Ertl 1951 Ford Pickup Truck die cast coin bank promotes Wix Filters. Comes with key measures 8-1/4" over hitch. In overall good condition with just a couple of small scratches on top of cab and a few little paint chips on passenger side rear, looks like it went down a gravel road.

1818
Die cast Ertl coin bank is a 1913 Ford Model T Van replica that promotes 1867 Nova Scotia Canada. In good condition. Comes with key and measures nearly 6" long.

1819
Liberty Classics Limited Edition Sunsweet Prune's 75th Anniversary Edition Ford Model 'A' Van coin bank with key. In good condition, about 6" long.

1820
Die cast Ertl 1/25th scale Steelcase 1905 Ford's First Delivery Car replica coin bank. No. 3428. Needs bank panel and key, or just display this nice piece as it is. In otherwise good condition, about 5" long.

1821
True Value Hardware No. 20 fire engine coin bank is about 7-1/2" long. In good condition, just find a key from your collection that fits it. Back reads 'A TruServ Company'.

1822
Vintage coin bank was made by Banthrico, Inc, of Chicago USA. Nice piece measures 5-1/2" long and is in good condition, just add key.

1823
Vintage Ertl die cast Montgomery Ward 1932 Ford Panel Delivery Truck or Van Collector Coin Bank is No. 5 in a series. Comes with original box and is No. 2110. Incl key and is in good condition.

1824
Die cast Ertl #1 Texaco NR-7955 airplane is 12" wide. Officially Licensed Product, side reads 'Texaco 5' and 'The Texas Company Petroleum Products'. In overall good condition with reasonable small reasonable chipping in front and rear wings noted.

1825
Die cast 1/18 scale Road Signature 1968 Shelby GT-500KR muscle car with box and stand. No. 92168. In good condition; and doors and hood open and wheels turn. Measures about 10-1/4" long.

1826
Ertl Collectibles die cast metal 1956 Ford Pickup Truck in original box. Box is 9-3/4".

1827
Ertl, Matchbox, National Motor Museum Mint, other model cars, some die cast. Longest about 6-1/4", crate bed truck is 1/43 scale. Ertl about 3-1/8" long. Matchbox made in England and incl Coal & Coke, Colman's Mustard, Lipton's Tea. Pieces in good condition with just one paint chip noted on front of Coal truck. Nice pieces.

1828
Catepillar 365BL Series II model excavator by Norscot Group, 1/24 scale 1964 Mustang, Ford Motorcraft semi tractor and trailer by Matchbox, Classic Collection Mercedes Banz model car with box, 1/43 scale Motor Max 1949 Mercury replica model car. All in good condition, Cat bosy about 4-1/2" long. Semi about 7" long overall. Buy the car of your dreams here and enjoy looking at it from the comfort of your chair, save on price and space in your garage.

1829
US Military and other pieces incl Sterling Silver 1943 MCPC pendant, Sterling 1K Rifle bar, USMC pin marked 592, two screwback buttons that look like USMC, three US Army buttons made by Scovill Mfg. of Waterbury and Bliebmann Mfg. of Newark NJ. Sterling pieces weigh 9.1 grams total, bar about 1" wide. Largest pin about 1-1/8" tall.

1830
National Motor Museum Mint pieces and more. Model cars up to a liitle over 5" long. Four in good condition, one needs a little glue.

1831
Die cast metal Ertl Collectibles 1936 Ford Panel van with Minneapolis Star Wired Photo graphics. Comes with original box.

1832
Liberty Classics and SpecCast Limited Edition die cast coin bank vehicles incl 1948 Ford, 1937 Ford Schwan's 50th Anniversary, 1934 Ford Good Year car. All in good condition with keys. Trunk doors open to show coin slots.

1833
Maisto 1/18 scale 1956 Chrysler 300B car, Redbox 1937 Ford Pickup truck, and other on base. All three in good condition with doors and such that open. White car about 11" long.

1834
Liberty Classics Heddon Fishing Lure 1916 Studebaker die cast replica coin bank with key (Limited Edition), Ertl die cast 1918 Runabout replica Ben Franklin coin bank with key, Ford Texaco truck with die cast collector gas pump, two classic street cars. All pieces in good condition. Ertl is 5-1/2" long, Heddon is about 6" long.

1835
Ertl Collectibles die cast 1/25 scale True Value Hardware Ford Pickup Truck with coin bank crate load. Comes with box. Packaging has been opened but truck is in good condition.

1836
Liberty Classics Limited Edition Clark Ford Model A die cast pickup truck coin bank with oil crates is Fourth in a Series. In good condition, measures 6" long. Comes with key and box.

1837
Will ship without tin. US Military buttons, 1-3/8" tall RAU US military belt buckle, 3-3/4" tall patch, more. Widest US Army pattern and is 1-1/2" wide. Incl five large and six small USMC Serial No 176 buttons by WB Co. Several 1" US Military pins marked 623, LR, M21, etc. Other neat pins, look them up. Cool pieces of our military history and more.

1838
Sterling piece marked with a P; plus Buck, Remington DuPont, and G96 No. 920 leather knife sheaths and three pocket watch cases or similar. Remington sheath about 10-1/4" overall, black ones about 9-3/4" and 8-5/8" overall. Sterling inscribed on back "W.E.Brandt' and measures 2" x 1-1/8", weighs 19 grams.

1839
Vintage Silva 'The Ranger' Type 15T was made in Sweden and comes with leather case. Measures approx 4" x 2-1/2". Latch on lid resembles a rear rifle sight. Compass arrow works and points north. Crack noted in mirror, otherwise both compass and case are in good condition. Measures in cm / mm and in and 1/10".

1840
Vintage liquid filled compass, and a Suunto M3 compass made in Finland. Suunto about 4-3/4" x 2-1/2", works. Other about 1-3/4" wide.

1841
Two Zippo lighters were both made in Bradford PA. Both are five-bar hinges. One has a single bottom dash. The other has four and three bottom dashes.

1842
Vintage row boat oar locks and brackets up to 7".

1843
Five lighters up to 3-1/4" long. Red one with coil that heats. Dragon one lights with double flame. Other coil one sparks but but coils do not turn color.

1844
Vintage Barlow B16 butane lighter with case. Sparks. Measures about 2-1/4" tall and is in good condition.

1845
Brunton Model 8040 compass with case. Looks accurate, measures 3-3/4" x 2-1/2" and is in good condition.

1846
Ronson, GS King, Windmill, other lighter. Butane and other, tallest about 3".

1847
Antique compass by USAnite, case marked 'ENG DEPT USA 1917'; other compass is approx. 1-3/4" diameter and a smaller, pendant style compass that measures only 3/4" diameter.

1848
Westclox 'The Conductor' pocket watch has locomotive reproduced on back and comes with case and papers. Winds continuously, hands set but couldn't get it to run. Comes with neat chain and may be easy to get going again.

1849
6-1/2" long Walco pipe wrench box has clear graphics on one end and box jointed corners - contains US marked compass case, other similar style case, percussion cap tin, and a Scripto lighter case.

1850
Swiss made Park Watch Co. 2 jewel unadjusted stopwatch runs, stops, resets. Looks like it winds but is currently would tight. Numbered by gears 'No. 3364' and '457347'. Also numbered inside of outer back panel '455554' - unique numbering sequence, Crystal detaches but should resecure with a dot or two of glus. Looks like some hailine cracking near smaller face, but minor overall. Switch slides nicely and button pushes smoothly. Measures about 2" wide.

1851
Vintage Swiss Made stopwatch winds, runs, stops, resets. Measures about 2" wide. Unique manufacturer marking on front.

1852
Retro Hanhart Pic Jewelled stopwatch made in Germany. Winds, runs, stops, and resets but sometimes will stall out and with a little shake will start again. Measures about 2-1/4" wide. Really neat graphics on face. Crystal in good condition.

1853
Vintage Swiss made Super Select stop watch is 2-1/4" wide. Winds, runs, stops, resets. In good condition, edge of crystal looks like there is some glue around it.

1854
Antique brass trench art lighter features half cent panels on sides and still retains fuse cap. Coins look to be Great Britian or United Kingdom. Measures 1-1/8" wide and 5/8" thick. Unique piece. Reverse side cent reads 1940 - coin is WWII era.

1855
Suunto Co. Helsinki Model KB-14 / 360Q compass is about 3" x 2". Is this a sighting or quadrant compass? Looks like it works. Back reads 360 degree Cotangens. Made in Finalnd and is numbered 011376.

1856
Antique German made Wanderer map plan measure with route marker features a compass on back and comes original leather case and instruction paper. Measures about 3" tall over loop. Roller wheel works, as does marker and compass. Neat piece measures both miles and nautical miles on a map.

1857
Antique brass Soo Line railroad or railway lock key made by Adlake. Ring marked with an S. Measures 2-1/8" long overall and 1" wide over loop.

1858
Antique Cutiecut German map plan measure converts centimeters to kilometers, inches to miles or verstes, and shows statute miles, kilometers, and nautical miles on the other side. Measures about 3" long over loop. Wheel turns needles, neat piece. Comes with leather case.

1859
Vintage Zippo lighter was made in Bradford PA and comes with leather Zippo belt pouch. Features a five bar hinge system and is marked on bottom with three strikes on both left and right.

1860
Vintage and newer comapsses all look like they work. Put one in each car, cause up here cell service is not guaranteed. Largest nearly 2" wide.

1861
Four Zippo lighters are all about 2-1/4" tall. Two gold ones do not spark, but black and silver ones do. First two may just need new flint. Two marked Bradford, PA.

1862
Two vintage Gillette shaving razor blade boxes, and a folding thinning shaving razor that opens to 7-1/2" overall. Neat boxes measure 2" tall.

1863
Two compasses that look like they may have glow in the dark dots on the dials, and one that the top doesn't want to open on. Two that I could open look accurate and measure around 1-3/4" wide. Stabilizer works

1864
Die Cast metal 1930 Model A Convertible Roadster with See's Candies graphics.

1865
Pocket watch chains up to 15-3/4" overall, plus a necklace measuring 11-1/2" clapsed and more. Both gold and silver toned hooks marked Swank.

1866
Die cast metal Ertl 1932 Ford panel delivery locking coin bank with Anheuser Busch graphics, 1/25 scale. Appears to be in original box.

1867
Heavy die cast metal 1912 Ford Red Crown Gasoline replica delivery truck, 1/24 scale. Appears to be in original packaging.

1868
Die Cast metal, Premier edition 1940 Ford panel van replica with Menards graphics. 1/32 scale. Comes with a display case and in the original box. Crack in the display case top.

1869
Heavy die cast metal 1912 Ford Pepsi Cola replica delivery truck, 1/24 scale. Appears to be unopened in original packaging.

1870
Die Cast Metal 1936 Ford Pickup replica, item no 36FDPK, 1/32 scale. Measures approx 6" long. Comes with original storage box.

1871
Die Cast Metal Ertl 1913 Ford Model T locking coin bank, stock no 7634. Appears to be in original packaging and unopened. 1/25 scale.

1872
Shakespeare Company Fine Fishing Tackle Die Cast Metal Collector Replica truck, model no 10-1638 "Tackle" 2nd in the series. Measures approx 5-3/4" Comes with original storage box

1884
Will ship without matches. Bug out bag holds emergency blankets. Jon-E GI hand warmer with case, Uco candle lantern, collapsible cup. fire starter bar, more. Fieldline bag about 13" long. Great for the truck or wife or kid's car.

1885
Gun, hunting, shooting books including Shooter's Bible, Gun Digest, Black's Wings & Clay, Shooter's Guide to Rifles, more.

1886
Die cast 1/24 scale Red Crown Gasoline 1912 Ford Tanker limited edition coin bank is new in box. Made by Gear Box Toys. Key includes.

1887
Die cast Craftsman Tools 1928 Chevy collector's coin bank is No. 4 in a series, key included. Box is 8-3/4" long.

1888
Pocket watch chains - some newer and some older. Gold toned, flat chain clip is marked Swank and measures 18-3/4" overall.

1889
Wonderful antique lockable chest with lift-out tray measures approx. 20" x 11" x 10" tall. May have been a tool chest at one time.

1890
Antique Hercules No. 6 Blasting Caps crate has box jointed corners and measures approx. 17" x 5-3/4" x 6" high. Nice graphics and sturdy crate.

1891
US Military and other match safes - will ship without matches. Three similar are each about 3" tall.

1892
Marble's compass looks to be accurate and measures about 1-1/8" wide. Works. Quality piece.

1893
Vintage Emergency Signaling Mirror (ESM/1) was made by General Electric Co. Measures 4" x 5" and could be used to signal a pilot in an airplane when in need of rescue.

1894
Vintage promotional Zippo lighter with box and instructions. Made in Bradford PA with four mark and three mark pattern on bottom. Advertises Harnischfeger P&H and has a five bar hinge. Box in overall ice condition with displayable graphics on front of box.

1895
Will ship without matches. Antique brass match safe or similar and another old match box with hinged lid. Box about 2-3/4" x 1-3/8" Other is 3-1/2" x 1" and has a 'false bottom' type piece in lid.

1896
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth. Measures about 2-3/4" long. Lid seal still intact.

1897
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth. Measures about 2-3/4" long. Lid seal still intact.

1898
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth Measures about 2-3/4" long. Lid seal still intact.

1899
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth. Looks like there is a small amount of corrosion on inside rim and on bottom of inside as to be expected. Measures about 2-3/4" long. Lid seal still intact.

1900
US Military match holder with built-in compass. Measures about 3-1/4" tall. Compass looks accurate and cork in lid is in good condition. Old hard plastic case looks pretty good with two small cracks noted near foot. Neat piece.

1901
WWI era US Enigineer Corps brass compass by Cruchon & Emons Serne. Compass is marked on back 'No. 51529' and has matching numbering on inside of lid. Steadyer and adjustment work, and compass points north as it should. Measures 2-1/8" over top of case. Neat piece. .

1902
Pre-1963 Everdry pocket match safe by the Park Sherman Co. of Springfield ILL, and another vintage match box marked Justrite. Come shallow dents in the Justrite, but none noted in other. Measure slightly on either side of 2-3/4".

1903
Antique Marble's pocket match box with original box was Patented in 1900 and made in Gladstone Mich USA. Waterproof match box / safe opens, hinges feels pretty smooth Measures about 2-3/4" long. Lid seal still intact. Box with nice colors and good graphics. Only missing one flap and bend noted in one edge, minor details considering we usually don't see the boxes wtih the safes at all. Bottom box flap reads No. 181. Great set would make a nice investment.

1904
Antique ESS Co. padlock with key is marked 'Fraim' on back of arm. Reminds me of railway switch lock and measures approx. 4-1/2" overl bottom link. Key works and padlock is in good condition.

1905
Two knife scabbards and two leather fixed blade knife sheathes up to 19" overall.

1906
LED magnifying head lamp with multiple magnifying lenses and instructions. Works, great for precision work.

1907
Vintage advertising pocket knives and others. Folding knife names include Campco, Imperial, USA, others. Longest is about 3-1/8" closed.

1908
Vintage wooden shipping crate was sent from England to the US and measures approx. 13" x 9" x 8" tall.

1909
Antique Jello crate reads 'The Genesee Pure Food Co. Leroy N.Y.' Bottom of crate faintly reads Milwaukee Wis. Awesome piece with good graphics. Measures approx 14" x 8" x 6-1/4" tall.

1910
Will ship without liquid. Lansky Sharpeners knife sharpeneing kit features fine, coarse, and medium stones, plus vise and permium sharpening oil, and more. Case about 8-1/2" wide and 4-1/4" deep.

1911
Knife sharpening supplies and more including Smith's sharpener with sheath, two flashlights with cases, Sportmen's Edge diamond knife sharpener, more. Sportsmen's Edge did not run, may be an easy fix. Flashlights work.

1912
Magnifying goggles by OptiVisor, Conduct-A-Lite inspeciton kit and a stethoscope - great for lock work.

1913
Two stage Crock Stick knife and scissor sharpener with box. Looks complete and is in good condition, about 10-1/4" long.

1914
Skeleton keys, barrel keys and other keys up to 2-3/4" long.

1915
Vintage tractor suicide knob is about 2-3/4" x 2-3/4" over mounting bracket.

1916
Two antique straight razors, one with sheath. Green handled razor by Cataraugus Cutlery of Little Valley, New York. Other by Klas Tornblom No. 750R of Sweden. Both are in good condition, handle slabs and blades look good.

1917
Antique box jointed sewing needle box is filled with a nice variety of polished rocks. Box retains original labels and once held Goodyear Welt or Turn No. 43 needles made for United Shoe Machinery Co. Box is approx. 3-1/4" wide.

1918
Padlocks by Master Lock Co. & others measure up to 2" tall.

1919
Caterpillar tag promotes Brebner Machinery Co. of Marinette & Green Bay, Wis. Necklace with bullet and a 2" military-style tag.

1920
Three vintage match safes are each about 2-1/2".

1921
Antique railroad padlock with key is marked 'C M & St P RR', presumably Chicago, Milwaukee & St. Paul Railroad. Other side is marked Store Dept. Key works. Body measures about 2-1/2" wide.

1922
Antique railroad RY EX. AGY (presumably Railway Express Agency) padlock was patented 11 21 05 and was made in USA. Measures 3-1/2" overall.

1923
United States Navy No. 2 Admiralty solid brass padlock was made by Jas. Morgan & Sons, measures 4" overall. Retains sliding keyhole cover and features four brass levers.

1924
Vintage No. 2 Tour padlock with key measures about 4-1/2" overall. Marking noted under 'No. 2 Tour' looks like a propeller.

1925
Unique whistle measures 4-1/2" overall and comes on a chain.

1926
English-made Schlitz beer luggage tag or fob measures 4-3/4" overall.

1927
Vintage Adams dissecting kit includes Justrite knife with sheath, scissors, tweezers, more. Kit measures approx. 7" x 4".

1928
US National Defense medal measures 2-3/4"; French WWI military medal pendant measures 1-1/2".

1929
Brass Winchester belt buckle measures approx. 1-3/4 x 2-1/2"; vintage Junkunc lock No. 606346 combination lock measures 2-1/2" with combo; other lock with key.

1930
1958 State of New Hampshire resident hunting & fishing licence - deer tag; 1959 and 1975 Pennsylvania resident fishing license buttons. Largest is 1-3/4" x 2-3/8".

1931
Bass Collector Series token includeing The Duel, Pursuit, Gotcha, Patience; plus 1962 Minnesota Twin schedule token sponsored by Minneapolis Savings & Loan; NRA, Bass Collectors and other tokens.

1932
Vintage compass made by W. & L.E. Gurley of Troy, N.Y. USA. Looks accurate and measures 2" wide. Spin stop button on side works. Neat piece.

1933
Heavy brass Natural Sine nautical / ship compass with level is 2-3/4" wide. Compass points north accurately. Lever on bottom moves levels. Hinges work. Very neat piece. No identifying markings noted except for chart on front.

1934
Vintage military compass by Keuffel & Esser Co. was made in New York and comes with a Dietzgen USCM (United States Marine Corps) leather sheath. Looks accurate. Measures 3" x 3-1/4". Latch works. Noted but unpictured is about half of the paint on back is chipped off, but overall wonderful piece. Peep hole on top lines up with mark inside of rim and across cover for accuracy of direction.

1935
Nice compass points north when it should and would be easy to throw in a pack. Measures about 3" long closed and is in good condition.

1936
Vintage Carac Alt Meter / barometer with case. Measures about 2-3/4" x 2-3/4" over case.

1937
Nice looking Pulsar Analouge quartz men's wrist watch with World Time, Alarm, Calender, Time and Chronograph. Comes with case and papers. Type Series WR (Cal. N94J). Face measures about 1-3/4" over edges. Scratches noted on back, and on clasp. Currently not running but may just need new battery. Attractive watch.

1938
WWII Schick Inc. US Navy stadimeter is marked on tag BU Ships Mark III Mod. -1942 and comes with leather case. Piece measures approx. 6-1/4" x 5" and looks in good condition.

1939
Century old French made wood encased compass works and measures about 3-3/4" x 3-3/4" over case. Wooden case is inscribed 'D.E.Dwyer Jr. June 1919'. Stabilizer button works and deploys when lid is closed. Wonderful piece of history.

1940
Antique compass in wooden case was made by W. & L.E. Burley of Troy N.Y. USA. Compass needle points north as it should, and all screws are intact. 3-1/2" x 3-3/4" wooden case is in good condition, if only it could tell us where it has been. Stabilizer button works and deploys when lid closes. Glass window with some chips noted around edges. Brass lock on front works. Unique calendar type chart reads right to left, then left to right.

1941
Antique Lewis and Clark, maritime, or surveyor's compass depending on who you ask. In good condition. Needle points north when it should, wooden case nice, stabilizer button deploys when lid closes. Measures 3-1/2" x 3-1/2" over case.

1942
Vintage Herter's No. 20 fishing fly tring vise with cast iron body was made in Waseca Minn. Measures about 5-1/4" over cast iron part. In good condition. Another in lot 1943.

1943
Vintage Herter's No. 20 fishing fly tring vise with cast iron body was made in Waseca Minn. Measures about 5-1/4" over cast iron part, and about 8-1/4" over whole thing. In good condition. Another in lot 1942.

1944
Antique Stanley Rule & Level Co, No. 72-1/2 Warranted folding Boxwood rule with brass fittings was made in Britain Conn. USA. Plus one other also made in USA. Stanley is in good condition - brass hinges are smooth, wood is good with no cracks noted and nice graphics on the inside. Both 24" long when opened. Other hinges also work and looks to be marked PAt' sPend.

1945
Durham Duplex razor was made in USA with a patent date Nov. 7 11; another straight razor with marking 'L West' and a Bakelite or similar handle. Both are in good condition and come with a vintage Durham Duplex Razor Co. case.

1946
Will ship without matches. Vintage Boy Scouts waterproof match holder is 3" tall. Rubber seal still soft. Neat piece would be great for the camping or bug-out bag.

1947
US Military issued compass made by Waltham. Very neat piece is in good condition - needle points north when it should, clasp works, brass case with minor wear as to be expected. Get it while you can.

1948
Brass desk sundial compass with wooden case. Compass face measures approx. 2-3/4" and overall, across feet approx. 5". Piece is in very good condition and would look great displayed on your desk or shelf.

1949
Leupold & Stevens Instruments Cruiser Compass looks to be from the 1950s or 1960s and comes with original box and pamphelt. Compass is 3-1/2" diameter and in good condition. Neat piece.

1950
Vintage Western Electric Bell System Talk & Monitor lineman's service handset complete with belt clip, pin dialer and line tap leads with alligator clips. Handset measures 8-1/2" overall.

1951
Antique Upson Nut Co. No. 84 and Stanley No. 62-1/2 boxwood folding rulers with brass fittings and hinges. Each is 24" long and in good condition - hinges bend smoothly and no cracks noted in wood, decent graphics. Neat pieces of history.

1952
Vintage Taylor brand sling psychrometer for measuring humidity comes with handle; plus another thermometer that measures 12-1/2" long and measures -40 degrees to 120 degrees.

1953
Miner's head lamp by Permissable Electric Cap Lamp was issued by the Dept. of Interior Bureau of Mines and was made by Koehler Mfg. Unit is complete with light, measures 7-1/2" x 5-1/2". Matching set, Lot 1955.

1954
Russian-made Moonlight 2/58 night vision NV-100 spotting scope by Zenit with soft case. Battery compartment has some corrossion salts and one AA battery is stuck in the bore. Unit appears otherwise very nice.

1955
Miner's head lamp by Permissable Electric Cap Lamp was approved for Canada EM&R Coal Mines, numbered 61L-2 and was made by Koehler Mfg. Unit is complete with light, measures 7-1/2" x 5-1/2". Matching set, Lot 1953.

1956
ProMaster 1100 Monopod wih case. Code 6778. Extends from about 21-1/4" to 67-1/4". In good condition, and is would be nice for traveling.

3002
This is an EXTRA lot, please do not bid on this.

3003
This is an EXTRA lot, please do not bid on this.

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Spring Sporting
 Online Only Auction
 
Auction Date(s)
Bidding Starts: Friday Mar 8 , 12:00 PM
Bidding Ends: Sunday Mar 17 , 07:00 PM
Auction Location

PRENTICE, WI 54556
Company
Bennett Auction Service

Contact: Adam Kielsmeier
Phone: 715-657-0078
Website: bennettauctionservice.com


3000
EXTRA lot

3001
EXTRA lot

466
Hobart Handler 140 MIG wire feed welder. Runs either gasless flux core or solid wire with shield gas. See lot 524 for gas bottle and regulator.

524
Carbon dioxide bottle is 18" with valve. Comes with a Miller regulator. Bottle has 80 psi of gas, will ship empty. Fits Lot 466 and other welders.

393
No Shipping. 1 quart of Citgo Extra Range Motor Oil

394
No Shipping & must be 21 to purchase. Calvert Special Candian Rye Whiskey. Federal seal intact.

395
No Shipping & must be 21 to purchase. Beam's Choice "Beethoven" Kentucky Straight Bourbon Whiskey. Comes in original box. Federal Seal is intact.

396
No shipping & must be 21 to purchase. Beam's Ruby Glass Decanter comes in original box. Ph. Boilieux deluxe decanter of fine California brandy. Federal seal still intact

397
Two 30 round Magpul AR-15 magazines, Emag. Magazines are new, comes with dust covers.

398
Two AR-15 magazines and blackhawk pouch. Mags are Brownells and Bushmaster

399
30 round Magpul Emag AR-15 magazine and Blackhawk magazine pouch,

400
Perfectly violet lilac tea pieces incl 9" tea pot, three 2-1/2" tea cups with saucers and plates. Bottom is marked 'Tomina E-OH hand painted Nippon'. Some chips in the pitcher pour spout, one cup. possibly more.

401
2 Blackhawk AR-15 magazine pouches and a canteen jacket.

402
Harley Davidson analog wristwatch with black leather band, model no HDM100. Face of watch measures 1-1/2" and strap is 3/4". Watch winds but hopefully just needs a battery.

408
2010 GMC Sierra SLT truck, VIN 1GTSKWE33AZ149797 has 192253 miles and extended cab. Truck is in good condition overall. Runs and drives well.

403
Harley Davidson Motorcycles belt buckle, model no 99437-05Y and other skull with cross bones belt buckle and death angel ring, men's size 14.

404
Outdoor lamp and yellow construction sight light. Yellow light stands 14" tall.

405
Fantastic Plastic faux falcon to deter the little unwanted critters from your yard or shop. Falcon stands 16" tall. Currently mounted to 8" piece of wood for a quick hang on the side of the garage or shed. Hardware included!!

406
Cast Iron Silver Dollar Pancake Pan measures approx 9" across.

409
Cub Cadet Ultima ZT146 zero-turn riding lawn mower has a Kohler 7000 series engine. Mower is in good condition, hyrdrostatic drives and deck work as they should.

410
Winchester and other ear mufs, a Milwaukee Bucks Coors Light flag, and more.

411
Craftsman 19.2 volt drill/driver and angle grinder with a battery. Both tools run well and are in pretty good condition.

412
Craftsman 19.2 volt power tool set incl. 1/2" drill, angle grinder, a multi tool with quick detach blade chuck, a battery, and charger. All the tools run and are in good condition.

413
Stanley matrick and SAE chrome wrenches, and Stanley screwdrivers. Wrenches from 9mm to 14mm, and 5/16" to 11/16", see pics for completeness.

414
Craftsman 19.2 volt reciprocating saw. The saw runs, has a quick change blade, battery, and charger.

415
Two battery tenders with 1.25 amp charger or maintainer for 6 volt or 12 volt batteries.

416
Craftsman pneumatic 1/2" impact wrench, is model 875.191183, and is in good condition.

417
Stihl electric chainsaw, is model MSA 140C, in very good condition, runs well, comes with a battery, and charger. The saw has a 10" bar, fair chain, comes with an AK 30 battery, nice saw.

407
2002 Honday Odyssey mini van, VIN 2HKRL18602H590008 has 211,293 miles. Van is in decent condition and could use a good cleaning. Passenger interior door panel is missing and should be replaced. Runs and drives fine.

418
Craftsman laser tack sliding compound miter chopsaw. The saw runs, has a laser guide, runs a 7-1/2" blade, and is a nice little saw.

419
Craftsman 19.1 volt saw set incl. 5-1/2" circular saw, a reciprocating saw, a battery, and charger. Both tools run, the reciprocating saw has a quick change chuck, the curcular saw is missing blade bolt.

503
Craftsman Pro Series rolling toolbox. The box measures 52" x 21" x 42" tall, has nice brawer liner in most drawers, rolls smooth, nice latching drawers with good slides, good toolchest.

420
Craftsman 4-1/8" jointer / planer. The jointer has a 5/8 hp motor, a cast iron base, and adjustable fence. Measures 24" long overall, and comes on a 28" x 18" x 24" tall.

421
DeWalt 13" planer. The planer runs, has dust and chip collection, rough cut and finishing cut settings, takes up to 6" tall boards, comes with three double sided blades, and more. The planer has a chip out of the back of the blade well, is missing blade screws, the third blade keeper and the third blade. Nice machine with a little work.

422
Fishing pole rack, measures 48" tall and holds 18 rods.

423
Louisville 16' extension ladder, rails are pretty straight.

424
Werner 4' folding aluminum ladder, has a 225 pound capacity.

425
Extra heavy duty exrendable folding ladder with a 300 pound capacity. Stands 56" tall collapsed.

426
Louisville 8' folding aluminum ladder, the ladder is straight, sturdy, and has a 250 pound capacity.

427
Famous Trails metal detector, has an extendable arm, takes 6 AA's and appears to be in good shape.

428
Craftsman 9 gallon 3.5 HP vaccum / blower cleaner, comes with a length of hose and runs.

429
Cub Cadet brush saw, or weed eater. The Cadet BC280 has a 27cc 2 stroke engine, comes with two changeable arms, incl. a brush arm, and a weed arm, has papers, and extra string.

430
Pair of 6' long 9" wide metal ATV or similar ramps.

431
Craftsman hand cart, has some welldone repairs, and stands 43" tall.

432
4 foot tall spool of fencing, spool measures 10" in diameter.

433
Schumaker fully automatic battery charger or starter. The charger is marked Built 4 Starting with a 200 amp start setting, altornator tester, and battery tester. Charger does both 6 and 12 volt batteries. Unit powers up and is in good condition.

434
Schumaker fully automatic battery charger or starter. The charger is marked Built 4 Starting with a 200 amp start setting, altornator tester, and battery tester. Charger does both 6 and 12 volt batteries. Unit powers up and is in good condition.

435
Louisville 6' folding fiberglass ladder, is sturdy and tight, and in good used condition.

436
Chanellock pick axe. The pick axe has a tight 36" handle, and measures 15" edge to tip.

437
Seymore DG10 poste hole digger, has work polished handles, and fair shovels.

438
Shovels for evry season, Truper aluminum grain shovel, Suncast snow shovel, and a spade shovel.

439
Libman 18" shop broom.

440
NIB Avalanche snow rake, if you havent seen how these work go look it up. The rake has a 24" wide cut, is the deluxe 20 version, and is NIB. This makes raking roofs fun.

441
Truper sledge hammer with a tight 35" oak handle.

442
Double bit axe with a tight 28" handle.

443
Rolatape model RT312 rolling measure, has extendable handle up to 36" long, and counts and resets as should.

444
Three adjustable clamps up to 22" long overall.

445
Auto tint welding helmet with an awesome patriotic design. The helmet has adjustable sensitivity and tint.

446
Sturdy two step folding step stool, measures 36" tall overall when open.

447
Pruning and trimming lopers incl. Corona dual cut lopers, and Yardshark trimmers with extendable handles.

448
Extendable stick magnet, great for jobsite clean up. Extends to 39" long.

449
No shipping. Stanley framing square, 4' and 2' levels, more.

450
Two pry bars up to 36" long.

451
High lift ratcheting jack stands 4' tall and is great for off roading adventures. Raises and lowers.

452
We think this is a Hydro Steel type garden hose, shorter is approx 20' and longer about 45'.

453
Hydrosteel garden hose is approx 50' long with good ends. Lightweight hose is crush and kink resistant.

454
Hydrosteel garden hose is approx 50' long with good ends. Lightweight hose is crush and kink resistant.

455
Five and two gallon gas totes, both have spouts.

456
Pair of steel car ramps with a 6,500 pound capacity between the pair, stand 9" tall.

457
Stihl BGA 57 electric leaf plower with extendable spout. The blower is in very good condition, runs, comes with papers, a battery, and a charger.

458
Pair of steel car ramps, measure 36" long, and 9" tall.

459
Rustic weathered wooden box, measures 31" x 14" x 10" tall.

460
Five and two gallon gas totes, both have spouts.

461
Near new folding metal saw horses with a 5-1/2" x 34" top. Nice pair.

462
Igloo Island Breeze 48 QT cooler. The cooler is in very good condition, and measures 24" x 14" x 15" tall.

463
4-1/2" angle grinder attachments and consumables incl. flapwheels, cut off wheels, guard, more.

464
Two garden hoses, larger spool is approx 30" in diameter. Both hoses appear to be in good condition.

465
Craftsman 3 gallon 1 HP air sompressor with a 135 max PSI. The compressor appears to be in good condition, runs, and builds pressure.

467
Tow totes and storage containers incl. Rubbermade and others.

468
Pittsburgh racing 1.5 ton rapid pump floor jack. The jack raises to 10", might be low on fluid.

469
Country Pro 6.5 HP wood chipper with a Kohler 196C engine. The chipper shows little use, has a 20" x 12" hopper, and stands 43" tall overall.

470
Craftsman 27cc blower or vaccum, is in good condition, runs and blows, great for yard work this summer.

471
Central Machinery 12 ton hydraulic shop press, stands 54" tall, and has an adjustable bottom tray.

472
Craftsman variable speed rotary tool, comes with drills, drinding, sanding bits, and more.

473
Craftsman, Will, and other aviation shears.

474
Pliers incl. snapring pliers, slip joint pliers, needle nose, more.

475
Punches, cold chisels, and more incl. brass, and others.

476
Hyper Tough 4-1/2" mini circular saw, great for small jobs. Rus, and is in good condition.

477
Craftsman 4-1/2" angle grinder, runs well.

478
Skil jig saw with laser cut line. The saw runs, is model 4495, has quick change blade, three speeds, and low vibration.

479
Makita 4-1/2" angle grinder, is model 9557PB, runs, comes with guard, and wrench.

480
Stanley and other aviation shears and cutters incl. Fat Max and others.

481
Stanley socket and wrench set, comes with 1/4", 3/8", and 1/2" drive ratchets, and sockets. The kit has matric, SAE, deepwell and shallow sockets, nut driver, wrenches, more.

482
Ace and other plier, slip joint pliers, and clippers.

483
Stanley screwdrivers incl. phillips, and flat. Comes with a set of Force picks.

484
Large and small Stanley adjustable pliers, linemans pliers, more.

485
Stanley Fat Max adjustable pliers, side cutters, needle nose pliers, more.

486
Screwdrivers and other incl. Stanley, Will, and others.

487
Craftsman variable speed rotary tool, comes with buffers, drinding, sanding bits, and more.

488
Greenlee, Stanley, and other chisels up to 1-1/2" wide.

489
Vector por, Sure Built, and other screwdrivers up to 15" long.

490
Huge Duralast adjustable slip joint pliers, measure 17" closed.

491
Duralast 12 point half moon wrench set, and several other box and open end wrenches.

492
Gearwrench SAE ratcheting wrench set from 5/16" to 11/16".

493
Four Craftsman wood chisels, largest is 1" wide. Nice set.

494
Mack, KD, Napa, and other open and box end wrenches up to 1".

495
Craftsman almost complete SAE set up to 15/16".

496
Three pop rivet guns, and several containers of rivets, and washers.

497
Craftsman metric box and open end wrenches from 9mm to 19mm.

498
Stanley 1/4" and 3/8" sockets, deep and shallow, metric, and SAE. The set comes with two ratchets, a nut driver, and is mostly complete.

499
Genesis 9" band saw. The saw is in near new condition, still has the table sticker, good fully adjustable blade guides, a fence and miter gauge. The saw stands 29" tall, and runs smoothly.

500
Stihl AK 20 battery and charger for your Stihl mower, trimmer, chainsaw, or other Stihl electric power tools.

501
DeWalt 20 volt variable speed reciprocating saw, is model DCS381. Runs but does come with battery or charger.

502
Ryobi 10" adjustable speed bench top drill press, has work light and laser guide system. The drill press runs, is model DP102L, missing key, and laser system is not functional, probably the switch as it is hard to turn.

504
Five gallon gas tote with some gas, will ship without gas.

505
Campbell Hausfeld 11 gallon 4 HP aircompressor, runs and builds pressure.

506
Pair of rims by MB Wheels. They have a 5 x 4.5" bolt pattern, are marked 16 x 7, SR386 ET38, Vision 58M.

507
Harris carry-along torch set. Unit shows little use with torch handle still have the UL sticker and gauges still having the peel off vinyl shipping covers. Tanks are owned and partially full. Will ship empty.

508
Stihl electric chainsaw, is model MSA 120C, in very good condition, runs well, comes with a battery, and charger. The saw has a 10" bar, good chain, the battery is model AK 30, nice saw.

509
Black and Decker Workmate 400 folding contractor work bench vise. The table measures 29" x 24" x 31" tall as pictured.

510
Craftsman 3 HP contractor grade 10" compound miter saw, runs.

511
Herter's padded folding shooting stand. The stand is in very good condition, stands 38" tall when up, great for range days.

512
Ace wheelbarrow, has a 38" long metal bed, a good tire, and weathered but solid handles.

513
Craftsman 3/8" ID air hose, approx 50' long. nice hose.

514
Briggs and Stratton 15 gallon air compressor. The compressor is in good condition, runs, and stands 40" tall.

515
5-1/2' tall bandsaw, has a 10" throte, and a 6" tall max capacity. The saw runs, has a smooth motor, and comes with a fine and aggressive tooth blade.

516
Blackstone 28" propane griddle.The griddle measures 44" x 21" x 33" tall, shows little use, the lighter switch needs replacement or repair but otherwise in good condition.

517
Schwinn red waggon, measures 36" x 17", has an adjustable handle, and front and rear steering. and would be great for yard work or for the kids.

518
New Little Giant Xtreme extendable ladder, comes with paint tray bracket kit, more. The ladder is model 17, has wheels, leveler feet, nice ladder.

519
Delta 2200 PSI pressure washer with a 4.5 HP Honda engine, model GCV 135. The pressure washer comes with a wand, hose, and attachments.

520
Approd 40' or 12-2 with ground copper under ground feeder wire, and a new 5' spool of 14-2 copper wire with ground.

521
Black Jack 12 ton hydraulic bottle jack with case and handle.

522
Kobalt and Power Torque adjustable jack stands, each approx 11" collapsed.

523
Two spools of 14-2 with ground copper wire, and appox a 30' spool of 14-3 with ground copper wire.

525
Mr. Heater portable buddy heater, has a 20 pound propane tank hook up, is in good condition, and measures 13" tall.

526
Stihl hedge trimmer, is model HS 45, has a 20" bar, the tank is dry but turns over and has good compression, and is in good condition.

527
Two air hoses incl. 1/2" and 3/8", the longer read one has a 300 PSI max and is approx 45' long.

528
Fein Multi Master vibrating power tool, is model FMM25Q, appears to be in near new condition still with the power cord ties, runs and sounds like it means business. The multi tool has a quick tool-less bit schange, has several sanding and cutting bits, nice machine.

529
NIB Pittsburgh 1.5 ton aluminum low profile rolling floor jack. The jack has the rapid pump function.

530
Prime 100 FT 12 gauge extreme weather extension cord. The cord has light ends, and is NIP.

531
Igloo Island Breeze 48 QT family cooler. The cooler is in good condition, and measures 24" x 14" x 15" tall.

532
Job Smart 5 gallon 125 PSI portable air tank.

533
10 gauge extension cord with light ends, a 12 gauge extension cord, and a few others incl. a 6 outlet power strip.

534
Three Big Red 2 ton jack stands. The jack stands are in good condition, have a double locking system, and stand 11" tall collapsed.

535
Ridgid heavy duty 24" pipe wrench, has good jaws, and is straight.

536
Two adjustable bar clamps, each approx 28" long overall.

537
New 250' spool of Southwire 12-2 with ground copper wire.

538
Craftsman 20" lochable tool box with three drawers. The cabinet is straight and in good condition.

539
Little Giant 24" animal live trap.

540
Just over 2 quarts of Power steering fluid, and 1.5 quarts of Kubota UDT2 universal transmission hydraulic fluid.

541
Peak antifreeze and coolant, the green gallon jug is sealed, the other 50/50 mix is open but mostly full.

542
Master Electrician 50' extension cord with light ends, and a Yellow Jacket extension cord.

543
Approx 3 quarts of premium universal tractor fluid.

544
10' long length of 5/16" chain with two grab hooks, no rapairs noted.

545
Almost 4 quarts of 5W-20 oil, and about a quart of 5W-30.

546
Craftsman pneumatic set, appears to be new or near new. The kit includes 1/2" impact wrench, 3/8" ratcheting wrench, an air hammer, new hose, papers, and more. Nice set, comes in a 15" x 12" case.

547
Flex seal liquid and spray, WD-40, Minwax spray, more. NO SHIPPING.

548
Power Service injection cleaner - power improver, 50-1 and 40-1 ready to use 2 stroke gas, Armor All car wash, more. NO SHIPPING.

549
20 ton and 5 ton hydraulic bottle jacks, larger measures 10" tall.

550
Power strips, work lights, extension cords, more.

551
Automotive supplies incl. oil filter wrench, jumper cables, exhaust clamps, more.

552
Campbell Hausfeld air hose, approx 50' long, and has good fittings.

553
Comfort Zone floor fan, stands 24" tall and all three speeds work.

554
Two smaller cross peen hammers, and an apolstery tack hammer. The larger tack hammer measures 11" long.

555
Bostitch 1/2" drill / driver. The drill runs well, comes with two batteries, a charger, and is model BTC400.

556
Four Coleman all purpose propane one pound cylinders.

557
Union Butterfield drilling and tapping fluid, both containers are less than half full.

558
Vaper 30 oz. reusable sprayer, has a max pressure of 200 PSI, has something in it but will clean up nicely.

559
LEM electric meat grinder is model 1158, has a #8 head, has three attachments, and runs.

560
Two Klein Tools wire strippers, up to 16 gauge, and down to 28 gauge.

561
Rapala filet knife with sheath, Matco Tools folding pocket knife with a blade spring, a NRA folding knife, more.

562
Two speed squares, larger is 12".

563
Hobart .030 gasless flux cored wire feed welding wire, is E71T-11, one two pound spool, and one sample spool, both are unopened.

564
Stanley controll grip adjustable pliers, are models 84-024, and 84-034, larger measures 10" long.

565
Drill Doctor model 350X drill sharpener, comes with bit holder, papers, and runs.

566
Two pairs of B&G mittens, both are size large and new.

567
NIP Extidable telascop, measures 15" long extended, and comes in a carry case

568
NIP Extidable telascop, measures 15" long extended, and comes in a carry case

569
NIB Vaper 30 oz. reusable sprayer, has a max pressure of 200 PSI.

570
DieHard 6 and 12 volt battery charger & maintainer, is in good condition.

571
Chicago Electric auto tint welding helmet with adjustable delay, darkness, and sensitivity. The helmet comes in its original box and appears to be unused.

572
Husqvarna and stihl chainsaw bar covers, incl. 16" and 17".

573
Ace instant on propane torch, works. Will ship without propane.

574
Two NIP spools of Stringliner mason line, both has a 165 pound test, and 540 feet.

575
Evercraft 6" dual action pneumatic sander. The sander is in good condition.

576
Router with a 22,000 max rpm, 1/4" chuck, runs well, is model 7610, the only name on it is on Black and Decker on the cord.

577
Master Electrician 25 foot 12 gauge extension cord with light ends.

578
Ozark trail camping set incl. a single burner stove, and a 3 piece cookware set.

580
Two Curt trailer balls, the NIP one is 2", the other is 1-7/8", both has 3/4" shank, nuts, nad washers.

581
Craftsman 19.2 volt 5-1/2" circular saw. The saw runs, and comes with a new DeWalt 5-3/8" carbide blade.

582
Tack Force 6" bench grinder, has worklight, and very good bearings, and runs.

583
Craftsman 19.2 volt saw kit incl. 5-1/2" circular saw, reciprocating saw, and a larger 19.2 volt battery. Both tools run.

584
Dremel Saw-max SM20 rotary saw, is currently set up with what looks like a tile blade. The saw runs, and is in good used condition.

585
Drill press vice with 2-1/2" jaws, and a 2-3/8" opening.

586
Caldwell shooting supplies lead sled 3 shooting bench. The shooting rest is in good condition, and measures 27" long.

587
Set of metric Stanley box and open end wrenches from 7mm to 17mm.

588
Craftsman 19.2 volt drill, driver, and light set. The set comes with a drill, impact driver, a light, and two Lithium Ion batteries. All tools run.

589
Power Torque 1/2" drive 20 volt impact driver. The driver comes with a battery, charger, papers, and hard case. Nice tool, runs.

590
Skil 18 volt drill. The drill is in good condition, comes with a battery, charger, and runs.

591
Soft blow hammer, rubber mallet, ball peen hammer, more. Largest is 12" long.

592
Stihl power tool battery, is model AK20, has a 2.8 amp hour, and is 36 volt. Comes with charger, 17" long Stihl chainsew bar cover, more.

593
DeWalt DCS393 6-1/2" cordless circular saw. The saw is in good condition, is currently set up with a DeWalt fast wood construction blade, runs but dose not come with a battery. Comes with a 15" tool bag.

594
Black and Decker 7-1/4" circular saw. The saw is in good condition, and runs.

595
DeWalt 20 volt 3/8" right angle drill driver, and a LED 20 volt work light. The tools come with a charger a battery, and both run.

596
Klein Tools wire strippers, a 30 watt solder iron, solder, flux, triler light connectors, more.

597
Craftsman screwdrivers, Mayers square, Fiskars clippers, more.

598
Mostly Stanley sockets with 1/4" and 3/8" drives. Also comes with a partial kit of metric sockets.

599
Craftsman air hammer or air chisel, is model 875.191192, is in good condition, and comes with four chisels.

600
Stanley pliers incl. needle nose pliers, side cutters, and slip joint pliers.

601
Black and Decker 4-1/2" angle grinder. The grinder runs, and is missing guard.

602
Napa, Stanley, and other 1/4", 3/8", and 1/2" drive sockets.

603
Three Stanley 3/8" ratchets, and a Stanley 1/4" ratchet. Also comes with a set of SAE and a set of metrick hex drivers.

604
DeWalt, and Bauer 7" grinder and saw metal cut off wheels. Two saw blades, and five other wheels including a huge flap disc.

605
Stanley stud finder, ball peen hammer, wrenches, and a 24" prybar.

606
Grip air spray paint gun. The paint gun appears to be new or very little use, has a 1 quart cup, nice piece.

607
DuraMax rotary tool. The tool shows very little use, has adjustable speed, comes with all sorts of bits, and a cary case.

608
T handle and other hex wrenches incl. metric, and SAE, Titan, and others.

609
Several pairs of Vice-Grips, and other locking pliers up to 9" long.

610
Large hex wrench set up to 5/8", set appears to be mostly complete.

611
Headlight and other head lamps, lanterns, and a pair of knee pads.

612
Five Irwin C clamps up to 6" and down to 2".

613
Several pairs of C clamps incl. 6", 4", and 2".

614
GB and other cable ties or zip ties up to almost 15" long.

615
Grease fittings, automotive stethoscope, ctooer pins, adjustable oil filter wrench, more.

616
Welding and brazing supplies incl. Forney Fluxed bronze 3/32" rods, 6013 by 1/16" welding rods, Hobart .030 mig wire, more.

617
Cummins 24" metric and inch Varnnier caliper, and a smaller 4" caliper.

618
Craftsman 1/4" socket set incl. 6 point deep and shallow sockets.

619
Stihl chainsaw files, felling wedges, and Oregon files. The Stihl files are from 1/8" to 3/16".

620
Crecent and other adjustable wrenches up to 12" long.

621
Spade bits by Speedbore and others up to 1-1/2".

622
Craftsman Nextec vibrating multi tool. The tool runs, comes with a battery, charger, attachments, cary case, and charger.

623
Stanley tools up to approx 10-1/2" long incl slip joint, needle nose, adjustable wrenches; 16' tape measure; 7-1/4" pry bar, more.

624
6", 7", 8" sanding discs incl Ace, Master Pro, 3M, etc. Stick-on and other.

625
Tech 5000P vehicle jump starter / power bank / air pump with tips and cord to connect pack and pump. Power bank turns on, and has a 44.4 Wh battery capacity iwth LED flashlight. Made by SmarTech Products. Red piece about 9-1/2" tall with max 150 psi, runs. Peak current 500A (jump start).

626
Reese TwoPower Farm & Ranch trailer hitch with 1-7/8" drop ball and 2" raised ball. Fits 2" receiver. About 14" long, incl hitch pin.

627
Two new pairs of B&G split cowhide mittens, each size Large.

628
Crescent sheet metal shears, wooden Lufkin extension rule, Swingline heavy duty tacker, NIP metric hex wrenches, utility knives, more.

629
NIB Warrior 7" variable speed polisher / sander comes with two 1-1/2" thick sponge pads and more covers or bonnets. Warrior is 10amp, nice machine.

630
DeWalt, National, other drill bits, many HSS. Incl Craftsman drill case. Incl some intracate bits. Larger ones incl DeWalt 1/2".

631
Reese Tri Ball hitch with 2-5/16", 2", and 1-7/8" balls with a black nickel rust resistant finish.

632
Heavy duty Auto-Loading Cornwell Tools utility knife, Lufkin Ni-Clad steel tape measure, Bernzomatic torch head, GB wire strippers, needle nose pliers, 12' Stanley Powerlock tape measure, more.

633
Craftsman 1/2" pneumatic impact wrench is Model 875.168820. F / R, about 9" tall overall, in nice condition.

634
Two pairs of Stihl and Husqvarna felling wedges, three chainsaw files, more.

635
NIP. Progrip 27 foot long 10,000 pound ratchet straps with 2" straps, and a reversible function.

636
ITT cross pein hammer with a 15" fiberglass handle with a little play.

637
Stanley pliers and nippers up to 8-1/2"; plus a Stanley Power Lock 12' tape measure in good condition.

638
Needle nose pliers, side cutters, slip joint pliers, more.

639
Two Stanley heavy duty staplers, both work and come with several racks of staples.

640
Stihl and other trimmer line incl. .155" diameter twisted line, .105" diameter twisted, and others.

641
Near new Craftsman 1/2" pneumatic impact wrench is model 875.168820, has 3 forward settings, and is in very good condition.

642
Two brushblades for your weed eater, brush saw or similar. One blade has a 1" arbor, and the other is 3/4".

643
18" pipe wrench with great jaws, and a non-slip handle.

644
3/8" and 1/2" drive ratchets, and braker bars up to 17" long

645
Craftsman 3/8" drive pneumatic ratchet wrench. The ratchet is in good condition, and measures 12" overall.

646
Craftsman matric and SAE open and box end wrenches up to 13/16" and 18mm.

647
Makita 4-1/2" angle grinder, runs, and is model GA4530.

648
Craftsman commercial power plane, runs well, has papers, comes with extra blades, fences, more.

649
Lincoln 18 volt greese gun, is model 1800 power luber series B. The gun runs on low and high, and comes with a charger.

650
DeWalt 20 volt drill driver set incl. drill model DCD780, impact driver model DCF885, charger, battery, and bag. Both tools run well.

651
Esteing hatchet with a classick stacked leather handle. Hatchet measures 13" tall, and has a blade cover.

652
Black and Decker, Craftsman, DeWalt, and other 7-1/4" circular saw blades, new and used.

653
Penske timing light, overall good condition, the spark lead has seen the hot side of an exhaust manifold, but otherwise nice gun.

654
Coleman pripane lantern. The lantern stands 16" tall, and has a partial tank of propane. Will ship without propane.

655
Engineers hammer or mini sledge hammer, has a 16" handle with minimal play, great for forging.

656
Stanley tools incl. 25' tape, speed square, pick set, pry bar, more.

657
Stanley 1/4" socket set incl. metrick and SAE, two ratchets, nut driver, more.

658
ITT, Buck Bros, and other claw and rubber mallets, and hammers.

659
AIr compressor fittings incl. tire inflation, bloers, male and female fittings, more.

660
Craftsman SAE and metrick mini open and box end wrench set incl. 5mm to 9mm, and 3/16" to 7/16".

661
Diablo, 3M, and other adheaive and velcrow backed sanding dicks and sanding nets, most are 6".

662
Hack saw, hammer, face shield, pry bar, more.

663
Stanley heavy duty stapler, works, and three partial containers of staples.

664
Pruning saws, ribbed saws, and others, longest measrues 16".

665
Irwin bit driver, 6 and 12 inch extensions, and several bits.

666
Rotary tool bit kits incl. grinding wheels, cut off wheels, buffing wheels, diamond cutters, more.

667
Ratchet straps, and bungee cords, great for fastening your auction winnings.

668
Black and Decker 1/4 sheet palm sander, is model FS540, and runs.

669
Craftsman and other speed squares for your small and big projects. Larger square is 12" x 12".

670
Two Black and Decker drill / drivers, both run forward and reverse, one battery is very strong, the other dosen't charge. and come with two chargers.

671
Black and Decker heat gun, and a hand held blower. Both run, and heat gun heats.

672
Larin 4" swiveling bench vise. The vise has double swivel locks, good jaws, and is in good shape.

673
DeWalt DCG414 brushless angle grinder, runs both 4-1/2" or 6" disks. The grinder is in very good condition, has two quick adjust guard, a 60 vlot Flex Volt battery, charger, manual, and bag. Couldn't get the battery to take a charge, bring your battery to open house to test.

674
Pair of perfectly pink glass platters, larger measures 13-1/2" across. Smaller measures 12-1/2" across the handles.

675
Perfectly Pink glass fruit bowl and cookie plate to use for Easter this year! No chips noted. Bowl measures approx 12" across.

676
Free Range brand 5 gallon double wall poultry drinker stands approx 17" over handle.

677
Lid for a galvanized boiler and pieces parts of a meat grinder and 17" sharpening rod.

678
3-1/2 ft bow saw in good condition.

679
Adjustable single-handle hand truck folds up to a compact 3 ft. Manufactured by S&H Industries

680
Mercury Marine 6 gallon gas tote. Graphic is in fair condition.

681
Mercury Marine 6 gallon gas tote. Graphic is hard to read.

682
Medium animal live trap measures 29" long.

683
Red and White brand portable air tank. Measures approx 24" long

684
Metal tool box with locking clasps. One clasp is broken. Box measures 17" x 7-1/2"

685
Jiffy Fidmann ice auger with a 9" cut, and a Tecumseh engine. The auger turns over and has good compression but tank is nearly dry, has good blades, and a blade cover.

686
A trio of simple gun racks when all you need is a place to hang your rifle or shotgun. Largest measures 3-1/2" long.

687
Olive green wooden box with hinged lid measures 32" long x 16" wide x 13" tall. Some of the metal strapping needs to be replaced.

688
General Electric brand outdoor yard light. This is a biiiiiiig one! Measures approx 12" across the top.

689
Rusted metal bucket with chain and binder. Bucket stands 12" tall.

690
Reddy Heater 35 brand heater, 35,000 BTU, 3 gallon fuel tank, measures approx 30" long.

691
Pair of heavy duty black plastic storage totes, only one lid. Totes measure 28" x 19" x 15" tall

692
Wooden tool chest measures approx 35" x 16" x 13" tall. Lock removed. Removable tray inside with additional fixed state compartments.

693
Husky brand heavy duty plastic tool box or storage for the bed of the truck. This is a gem of a toolbox with wheels and a self-storing handle and hinged top pieces. In its most compact size it measures 25" x 16" x 15"

694
Weatherproof army green colored backpacking dry bag. Measures approx 24" x 15" x 8" deep. Multiple layers of closures, feels mostly waterproof.

695
Rodent deterrent plastic falcon to keep the yard and shed free from the peskies. Currently on some wood for quick application to the shed or garage. Falcon measures approx 13-1/2" tall. Wood adds additional 8"

696
Tipton brand "Best Gun Vise" to use as an extra set of hands for gun disassembly, gun cleaning, gun modifications, etc. Appears to be new in box.

697
Set of 4 Polar ice fishing tip ups to use while risking your life on the thin ice out there. Each measures approx 18" overall.

698
Green five gallon bucket with a trio of Polar Tip ups for what remains of ice fishing season. Tip ups measures approx 18" overall

699
A Pair of tackle boxes incl Plano 6300 filled with bait and lures and a brown metal tackle box just like Uncle had when you went fishing together. Plano tackle box measures approx 16" x 7" x 8"

700
Ultimate brand portable speaker or light three legged stand. Adjusts to different heights up to 6 foot 6 inches tall.

701
Pair of hard back gun cases. Longer measures 4 ft long and has one latch that can be tough to latch correctly; smaller is 3-1/2 ft long.

702
Coleman Powermate portable air tank, model no CL0551109, measures approx 38" overall.

703
Char Griller Professional Patio Pro griller and smoker, model no 1515, appears to be unused in box so some assembly required. Made of heavy steel. Just in time for spring and summer porch grilling and smoking!

704
Team Hornady bag with plenty of pockets for your stuff. Could be used as luggage for clothing or as an accessory bag for all your pew pews. Plethora of storage options incl the outer pockets and a velcro panel for interior of the bag to accommodate just about any contents.

705
Navy blue and gray camping tent, appears to be a 2-man tent. Incl folding tent poles and ground stakes.

706
Intricately carved walking cane and a small Old School Sports souvenir basbeall bat. Bat is 18" long. Cane measures 3 ft tall.

707
Five panels of camouflage burlap to wrap your hunting stand or create a hidden ground blind all contained in a rugged Rubbermaid Action Packer covered tote. Tote measures approx 27" x 18" x 12" and can be padlocked on both ends.

708
Set of four ammo cans measure approx 11" x 7" x 4"

709
Trio of military style ammo cans. Largest inside measurements are 5.8" x 11" x 7.2"

710
Ace Hardware grass whip measures approx 3ft long, small 16" bow saw, 10" tall oil can. All functional and ready to be used.

711
Homelite Texron Super 2 chainsaw with a 14" bar. The saw turns over and has good compression, tank is bone dry. Nice saw, comes with case.

712
Homelite Texron Super 2 chainsaw with a 16" bar. The saw turns over and has stout compression, tank is dry. Nice saw, comes with case.

713
Super Power model 540000, generator, runs 750 Watts, 6 Amps, Phase 1. Measures approx 18" long, and has a Kawasaki gas engine that turns over and has good compression but tank is dry.

714
Seven jointed and unjointed fishing lures, Rapala and other.

715
Ammunition brass and nickel coated cases incl. almost 100 pieces of .44 Remington Magnum, Somewhere around 100 pieces of .357 Magnum by Remington and others.

716
Plano over and under tackle box full of soft baits, sinkers, hooks, and weights.

717
Fishing season is coming, get it now before the stores raise the price! Stren, DuPont, Berkley fishing line in varying weights, hooks, sinkers, lures, scaler, more.

718
A few Heddon River Runt Spook Sinker, Jitterbug, other vintage woodel fishing lures and bobers. Some lures have glass eyes.

719
Vism Flasklight+ with integrated KeyMod mount. Flashight works, other parts untested. 4" long, comes with packaging.

720
Antique powder horn, cast iron scale, and a vintage giroscope. Powder horn is about 5" long and sratched on the side reads 1864 A.H. Pittsley, nice piece. Scale about 5" across base and isncl 3/4 of weights.

721
Snap Safe with keys could be mounted in your vehicle, closet, etc using the four holes on back made for that purpose. Padded nicely for a pistol or similar. Opens a little hard but definitely doable. Measures about 8-1/2" x 11-3/4" OD.

722
Plano 787 tackle box, a smaller12 box, and a 9-1/2" boat prop with a 3/4" splined hub. The boxes have some bobers, baits, lurs etc.

723
Will ship to qualifying state. Sixty round P-Mag D-60 rifle magazine fits AR15, M16, M4, HK 416, FN Scar, MK 16/16S, SA-80, M27. Comes with box, manual, sticker, cleaner. Can seat fully on a closed bolt.

724
Bulldog Vaults lock box with keys measures about 11-3/4" x 10" x 2-1/2" overall. Great for a handgun or similar. Incl two keys. Mechanical lock may just need batteries, as the buttons do not light up. Or, just use the keys.

725
Four open spinning reels by Quantum, Shakespeare, and others. All spin smoothly.

726
11 Reel Bait Bullet lures. Each is approx 3-3/4" long, and are NIP.

727
Aladdin Stanley lunchbos and thermos set. Thermos is quart size and stands about 14-1/2" tall; incl stopper and cup. Small dent noted on bottom. Cooler in good condition and measures about 14" x 8-1/2" x 7-1/2" overall.

728
Compact lock box with keys is ready to mount in your truck or nightstand. Two holes on back for that very purpose. Measures 6" x 8-1/4" and is in good condition with nice foam padding.

729
1953 Japy mess kit may be French Army, look it up and see for yourself. Measures about 5" x 7" over largest piece.

730
Aker right handed indide the waistband leahter revolver holster is about 5-1/2" tall and 6" wide. Model 140, also marked J-2.

731
Vintage wooden Blatz Beer crate is about 16" x 10-1/2" x 9-1/2" tall. Reads Milwaukee Wis. Decent graphics on inside of box, outer ones a little lighter.

732
NIP Boating Essentials Offshore 70 bracket mount marine compass.

733
Three sizes of Chicago Cutlery knives, perfect for home processing deer or beef. Longest about 15" overall. Knives are numbered 66S, 44S, other. Quality knives worth the investment.

734
Two Safariland Nylok pistol holsters 30-95 4051-383 and 28-95 4052-76. Larger about 8" x 6" over body, other about 8-1/2" x 4-3/4". Look them up to see if they fit your pistol.

735
Actron Auto Scanner Plus vehicle code reader for OBDII vehicles. Model CP9180 and comes with case, cord, and manual.

736
US Military leather pistol holster with suppressor and magazine pouches. Looks like it may be for a Walther P-22 or similar. Measures about 5-1/2" x 7-1/2" overall and has ties to secure to the leg. Nice holster.

737
Fobus Smith & Wesson paddle holster reads .357 and 2.5". Comes with packaging. Sticker on front reads All J-Frame .38, .357, Rossi 88.

738
Safariland belt handgun holster is numbered 19-01 and 4050-01. Measures about 7" wide overall and is about 4" over tallest body part. Look it up to see if it fits your pistol.

739
Safariland Nylok handgun holster is numbered 28-95 and 4052-76. Measures about 8" wide overall and is about 6" over tallest body part. Look it up to see if it fits your pistol.

740
Safariland Nylok handgun holster is numbered 30-95 and 4051-383 and comes with Thumb Break Hammer Strap Adjustment Key. Measures about 8-1/2" wide overall and is about 4-1/2" over tallest body part. Look it up to see if it fits your pistol.

741
Antique cast iron Enterprise fruit or lard press / sausage stuffer was patented April 10 1883. Handle and gears turn smoothly. Stands about 17" over top curve. Outfitted with a No. 25 Small Plate. Incl sieve in bottom. In good condition, would make a neat lamp base.

742
Uncle Mikes No. 5 Sidekick right handed holster is mounted on an adjustable Uncle Mikes shoulder strap. In good condition. Look it up to see if it fits your pistol.

743
Nice magazine holster is belt mountable horizontally or vertically. Measures about 4-1/4" x 5-3/4" with pouches about 1-1/4" x 3/4" x 3" inside, a mag about 4-1/2" tall would fit. In good condition.

744
Sig Sauer black open top concealment holster is 4-3/8" x 2-3/4" overall.

745
The Geogre Lawrence leather pistol holster is marked 24 and 570, look it up to see if it fits your gun. Measures 5-1/4" long and about 3-1/4" over widest part.

746
Safariland paddle holster is Model 568-01. Stamped S&W J 13 12. Paddle measures 6" x 5-1/4" tall. Holster about 4-3/4" tall. In good ocndition, incl wrench and Users Guide. Look it up to see if it fits your handgun.

747
Two canvas packs mmay be military. Plus what looks like an AK-47 or AK-74 cleaning kit about 3-3/4" long. One pack marked C.T.C. on top leather strap.

748
Handcrafted Barsony Leather shoulder holster. Holster itself about 8" x 3-7/8" overall OD. Adjustable straps about 1". In good condition.

749
Galco Gunleather underwrap belly band for concealed carry. Band about 4" wide and size XL 48-52. In great condition, incl packaging and papers. No. I129L.

750
Advanced Technology Fiber forestock fits AK-47, MAK-90, MAADI and other variants. CAA Israeli pistol grip, more.

751
German made Akah leather pistol / handgun holster is well constructed. Measures 6-1/2" down barrel side of leather. Frog marked Akah 2-96, near bottom of holster Akah 2-96 is marked. Looks like it's a German Military or Police holster. About 11-1/2" overall. Right handed. Look it up to see if it fits your gun.

752
Uncle Mikes double magazine paddle holster and a Safariliand right handed belt mount pistol holster about 5-5/8" tall and 3-7/8" wide overall. Paddle about 4-3/8" x 5", magazine slots 9/16" x 1-7/16" x 2-13/16" ID.

753
Bulldog Deluxe Black Mini Range bag is Model BD-917. Looks like new and measures 13" x 9" x 3".

754
Blue Stone Safety Products concealed carry ankle holster with packaging. Band about 4" tall. In good condition. Bag tag reads Ruger W/D-Ring A314D.

755
Pistol holster with magazine pouch has velcro side to store on the inside of your gun safe and save space. Measures about 7-1/2" tall and 3-3/4" wide OD not measuring clip pouch.

756
Keg spout is about 19" overall. Pump pushes air, looks to be in good condition.

757
Discharged grenade is marked RFX on side and stands about 4-1/2" tall. Top marked Fuze M228 MEI01J 018-013. Great display piece.

758
Bulldog Extreme ankle holster with packaging is Size 3 and fits most compact automatic pistols / handguns with 2-1/2" - 3-3/4" barrels (Taurus Millenium, S&W M&P Compact, 1911 Compact, etc).

759
Blackhawk Serpa Strike CQC Platform holster side is about 5-3/4" x 4-3/8" tall and in good condition. Designed to fit any Blackhawk T-Series�, Serpa� or Omnivore� holster at any angle. Incl three screws.

760
Tagua Gunleather posket holster for a Smith & Wesson Bodyguard 380 with laser or similar. Ambidextrous, neat holster in good condition. Measures 5-1/4" x 3-1/4" x 1".

761
Blackhawk CQC C1379 Serpa shoulder harness is size Large, Right Handed. In good condition.

762
Boker Magnum, Abu Garcia, Mossberg, other folding knives; plus a vintage 2-1/2" Bull padlock. Boker blade is tight and locks open, measures about 5-3/4" closed. Other two lock-back blade's also tight. Abu fishing multitool is about 2-1/2" long closed, perfect for the tackle box.

763
BK & Ka-Bar No. BK23 fixed blade knife with sheath, CRKT Ikoma Keydashi rounded knife with 2" blade and sheath, other fixed blade knife, two knives up to 12-1/4" overall ready to customize with handle slabs. Black knife about 6-3/4" overall.

764
Taigear holster set-up is about 12" x 6-1/2" over backing pad. Pistol holster is 7-1/2" tall and about 4-1/2" OD not measuring the magazine pocket. Other pocket for extra ammo about 5" tall. Great set up. Google to see if it fits your gun.

765
Seller notes this is an SKS Paratrooper spike bayonet; plus an SKS oiler or similar and a cleaning kit. Spike baynet is about 11" long, screw included. Oiler about 3" tall and in good condition. Cleaning kit looks unmarked.

766
UpLula 9mm-.45ACP pisotl mag loader / unloader with packaging.

767
Two Glock 21 and 41 magaazines are .45 ACP, 13 +1 round.

768
Four position pistol buttstock is 14-1/2" extended.

769
Foreign wooden baton with custom made Ray Sullivan leather holster in good condition. Baton about 2' overall.

770
Large machete with matching sheath was made in El Salvadore. Measures about 28" overall.

771
Awesome 81mm cartridge case is 22-1/2" tall. Side reads Smoke WP M375 W/ Fuze M524A5 For Mortars M1 and M29.

772
SKS bayonet, SKS muzzle brake, SKS or AK butt stock and cleaning kit. Cleaning rods, more.

773
Two Glock 21 and 41 magaazines are .45 ACP, 13 +1 round.

774
Military poeces and other incl double pack about 10" tall marked 1984 and more, belt with suspenders, other pack, ankle wrap, more.

775
Combat exchange all-weather synthetic rifle stock is 29.25" long.

776
Advanced Technology synthetic adjustable rifle stock appears to be for SKS or similar and measures 31" overall.

777
Two sings incl Mossberg and Hippies Use Side Door. Measure about 24" x 15" and 12" x 15".

778
Victorinox, Dexter Russell, Cozzini, other filleting and butchering knives up to 14".

779
Antique hand painted salt and pepper shaker set, sugar, other S & P, rosebud pieces about 3-1/4", much more.

780
Two cute teapots and a chocolate pot made in Austria. Two teapots are both in overall good condition with jstu some small chipping noted on spouts, pink one hand painted. Chocolate pot about 10" over lid. Pot could be a neat decoration up on a shelf. A few small ships noted on rim and spout, and lid has been repaired, see pics.

781
Antique handpainted covered pot, cream pitcher made in Germany; other pieces made in Bavaria, Japan, etc. Larger white dish 8" wide.

782
Large American flag may be a soldier's military funeral flag. Measures about 56" x 113". Good condition with just some discoloration or mildew noted that may just wash out. No holes or tears noted.

783
Caldwell Shooting Supplies rifle bipod clips onto front sling mount. Stands about 6" overall and extends to 9". Nice piece.

784
Two Western USA folding knives are Models S-531 and S-534. Brown handled one has trouble locking open, release button feels a little gummed up - may just need some oil. Measures about 7-1/2" open, blade is tight and so are fittings. Handle slabs good with one scratch noted but no cracks and a good fit. Black handled one locks open easily, bade with a little wiggle, handle slabs and fittings tight. Comes with leather Weastern belt pouch. Wipe them down, add a little oil, and enjoy these quality made knives.

785
Boker Model Bok608 specialty knife with sheath, plus Jaguar and other throwing knives with sheaths up to 6-3/4". Boker nearly 6-1/4" long.

786
Ka-Bar 1300 folding utinsel knife with belt pouch, great for the survival pack or camping. Knife locks open, all fairly tight, measures 3-3/4" closed.

787
Remington 12 gauge slug barrel is 20" and has adjustable rifle sights. Bore is bright.

788
Caldwell Shooting Supplies XLA rifle bipod is the 9" to 13" model. Spring loaded legs, detaches and attaches to gun using the swivel stud. Padded front. Comes with packaging.

789
Two Ruger Mark pistol magazines, one has a chrome bottom, the other has the Ruger insignia in the bottom.

790
Telescoping baton with belt clip extends to 16". In good condition, nice piece.

791
Communist rifle oil & solvent bottles, one with Chinese characters.

792
Havalon Knives set incl 5-1/4" long handle and four blades up to 6" overall; great for the hunting pack. In nice condition, comes with carry case.

793
Smith & Wesson Bullseye hunting knife set with belt sheath. Knives incl 6-1/2", 9-1/4", and 11" overall. Great set.

794
Glock No. 78 tactical or field knife with hard plastic sheath. Made in Austria, measures 11-7/16" long overall.

795
Large survival knife with storage space in handle for matches and a small compass (compass included). Comes with belt sheath or case. Knife measures 14" overall.

796
G4 Falcon extendable spear style knife is marked Renegade Tactical Steel. Extends from about 13-3/4 to 17-7/8" long. Comes with sheath.

797
Polytech 30 round AK-47 magazine, measures 9" long, appears unused and is marked Poly China.

798
Polytech 30 round AK-47 magazine, measures 9" long, is in good condition, shows some use, and is marked Poly China.

799
SKS detachable magazine, measures 9-1/4" long, and appears unused.

800
U.S.A. Magazines SKS detachable magazine, measures 10" long, and shows little use.

801
SKS detachable magazine, measures 10-1/8" long

802
AK-47 magazine, measures 10-7/8" long, shows use but is in good condition. 40 round?

803
Unissued AK-47 magazine, measures 11" long, shows little use and is in good condition. 40 round?

804
Unissued AK-47 magazine, measures 11" long, shows use but is in good condition. 40 round?

805
Hand forged cleaver with nice custom leather belt sheath. Cleaver about 9-1/4" long.

806
Vortex Sparc red dot scope is for Speed Point Aiming in Rapid Combat, or perhaps helping to get your deer. Incl extension piece. Currently does not turn on but may just need new battery. Measures 3" long and would look stellar on your AR-15.

807
Vintage Western fixed blade sheath knife, most likely a Bird & Trout hunting knnife. Marked Boulder Colo., Made in USA, Patented. Measures about 6" long. Blade, fittings, leather handle rings all tight.

808
Pair of folding straight razors. Dark one hand crafted by Tom Anderson, other is a Timber Wolf. Eack locks open with no blade wiffle, and they feature liner locks. Measure about 4-1/2" and 5" overall closed.

809
Antique brass lapel compass was made in West Germany. Measures 1-1/4" wide and about 2-1/2" long.

810
Smith & Wesson H.R.T. front eject knife. Measures nearly 7-3/4" when opened. Glass breaker knob on other end. Blade is tight and springs out nicely. Lock works. Marked SWOTFB.

811
Tac-Force Speedster Model folding clip knife is an impressive 13" opened. Blade is tight, liner lock also tight. Clip rather loose, tighten up. Handles good.

812
Two Fury A three angle fixed blade knives, 9-1/4" Azan throwing knife, 5-1/2" keychain defense tool. All knives with sleeves. Fury pieces No. 60009 and measure 7".

813
Quality Grohmann DH Russell fixed blade knife with leather sheath. Knife looks new and is 10-1/4" long. Inscription on blade commemorates 20 years as an employee of Wausau Window & Wall Systems. Other side of blade reads Canada.

814
BK & Ka-Bar Model BK-16 Becker Short Drop Point fixed blade knife. A modestly sized field knife perfect for belt or pack carry. Includes a MOLLE compatible Cordura� sheath and an extra set of brown handles. BK16HNDL micarta handles will fit the BK16. Rockwell hardness 56-58. 20 degree edge angle. Made in USA. Measures about 9-1/8" long.

815
SOG Ace fixed blade stone finish outdoor knife with textured sheath and original packaging. Measures 8-3/4" long, nice knife.

816
Hundereds of pieces of brass incl mostly .30-30 Winchester, a handful of .44 Remington Mag, possibly other.

817
12" Glock Pistols sign and a Beware of Owner sign about 10-3/4" tall. Both in good condition.

818
USA made compact flashight and a Park lighter. Flashlight about 5-1/2" long, batteries not incl. Cracks noted on lens, neat display piece. Lighter wheel spins freely, about 2-1/4" tall.

819
DVDs incl The American West, Unlocking DaVinci's Code, Trans-Siberian Orchestra, Ben Franklin, Beyond The Law, more. Three cases I checked complete.

820
Mixology & Craft whiskey set incl to 3-3/4" glasses, pair of slate type coasters, chilling cubes, Whiskey Cards, more. Box 8-3/4" wide.

821
Pair of camo ammo cans are marked SCF. Seals are still soft, cans measure about 10" x 4" x 7".

822
NIP Harley Davisdon passing lamp moulding kit, Sun Pro Super Tach II, NIP Accel Performance spark plus wire set for Harley Davidson, 15" bracket for license plate or similar.

823
Rite Edge Forged Series Bill Hook machete with box is No. HS-4426. Measures 16-1/4" overall, nice handle slabs are tight. Incl sheath.

824
Awesome collection of animal skulls up to about 4-1/2" long. Incl bird and possibly squirrel.

825
Cast iron wall-mount match safe with lid is 7-1/4" long and in good condition.

826
Bushnell 7-21 power 40mm binoculars have Insta-Zoom and come with case. Binocs focus and are bright. Three lens covers incl. About 6" long and has tripod mount.

827
Antique Craftsman breast drill features two wooden handles and is 17-1/2" long. Turns easily.

828
Uncle Mike's Sidekick vertical shoulder holster is size 4 Scoped, holster about 15" long over top side of rim. Look it up to see if it fits your pistol. Right handed.

829
Gun rack for your pickup, and a utility hanger for SUV's and RV's. Each about 12" long.

830
Uncle Mike's Sidekick vertical shoulder holster is size 13 Scoped, holster about 18" long over top side of rim. Look it up to see if it fits your pistol. One black piece not marked Uncle Mikes. Right handed.

831
Two antique Fuller Brikarier mason's brick mover tools. Each about 16" long.

832
12" Glock Pistol sign and a NIP Glock Perfection 12" wide license plate.

833
Harley Davidson Motorcycles clip knife made by Zippo, Harley pins, Canadian dollar coins, more. Knife piece about 2-3/8" closed.

834
Harley Davidson Motorcycles Heritage Softail Franklin Mint Precision Pocket Watch with eagle stand and belt mount sheath. Watch has chain nearly 14" over end hook. Currently not running but may just need new battery. Official licensed product. Stand about 3-1/2" tall, watch about 2" wide. Another in lot 836.

835
Two sets Homak 8" parts organizers.

836
Harley Davidson Motorcycles Heritage Softail Franklin Mint Precision Pocket Watch with eagle stand. Watch has chain nearly 14" over end hook. Currently not running but may just need new battery. Official licensed product. Stand about 3-1/2" tall, watch about 2" wide. Another in lot 834.

837
2-1/4" wide military belt 30" long; other belts, straps, knife sheaths, dog collar, 5-1/2" carabiner, more.

838
Folding and tactical knife sheaths incl Gerber, more. Longest about 13-1/2".

839
Real Keen 11-1/4" cleaver and a smaller 6" cleaver. Handle slabs tight on each.

840
Belzig Knives Rostfrei fillet knife with sheath. Knife measures 12-1/8" long. Handle slabs are tight.

841
Heavy duty machete is 18" long with 11" blade. Wrapped handle for a more comfortable swing.

842
MTech USA folding clip knives have thumb studs for a quick open. Measure about 8" and 8-3/4" open. Smaller blade a little wiggly when open, other is tight. Nice knives.

843
Tactical sling for AR15 rifle or similar. Strap is 1-1/4" wide and in good condition, adjustable length.

844
BK & Ka-Bar Becker BK-2 Companion tactical fixed blade knife comes with hard sheath or scabbard, box, papers, sticker. Sturdy knife measures 10-3/4" long and is in nice condition. Box reads different Model No.

845
McNett tactical utility knife with hard sheath or scabbard, Fury folding knife with cleaver type blade, very long serated folding knife, 4-1/2" Elk Ridge concealment knife with sheath. McNett about 6-3/4" overall.

846
Two folding fillet knives incl Schrade Cutlery First Production Run with belt pouch, and Ridge Runner knife. Each have wooden handle slabs; lock back works. Blades with little wiggle. Handles nice. Measure about 12-1/2" and 13" long open.

847
Four animal skulls up to about 6" long. Seller notes red fox, porcupine, racoon, bobcat.

848
Boker Plus Besh wedge neck knife and a Cold Steel 'The Spike' fixed blade knife. Each with scabbard. Measure about 7-1/4" and 8-1/8" long. Blades and handles tight. One sheath Secure-Ex.

849
Black Panther No. 064 fixed blade knife with scabbard was made in Solingen Germany. Measures about 10-3/4" long overall. Knife with tight fittings, nice piece.

850
Buck Knives Paklite Fieldmaster kit incl larger 141 knife, smaller 135 knife, and a 499 guthook ring; plus nice 9" sheath with belt mount, removeable liners, and two zipper pockets for waterproof matches and other necessities. Longest knife about 8" long. Incl paper. Very nice set.

851
Two CRKT Folt's Minimalist concealment knives with scabbards. Knives each about 5-1/4" long and in good condition, Models 2387 and 2386.

852
We believe this is an Italian M1870 sword bayonet that was arsenal-shortened for later reissue. Blade is marked FG in an oval and on the barrel mount fitting 'G 8009'. Measures 14-3/8" long overall. Blade, fittings, handle slabs tight. Leather frog is soft and marked 6/73K.

853
Antique WWI Era Swiss Military bayonet is about 16-1/2" long. Blade reads Waffenfabrik Neuhausen, and barrel mount fitting is marked 275604. Blade, fittings, and handle slabs are tight. Button moves easily, not frozen in place. Neat piece of history.

854
Henry Rifle sign is 12" x 15-1/2" and in good condition.

855
Is this a German K98 bayonet for Mauser rifle or a Yugoslavian bayonet? Regardless, it comes with a nicer-than-most scabbard and frog. Serial numbers on bayonet and scabbard match. Blade reads Npeay3ere 44, presumably 1944 WWII manufacture. Barel mount piece marked 12134 on one side, with another marking on other side. Scabbard also marked with a matching 12134. Measures 14-3/4" long overall. Blade, fittings, wooden handle slabs are all tight. Button moves. Scabbard in good condition. This is a very nice piece, possibly unissued.

856
Police style telescoping baton is 16-3/4" opened and comes with Bianchi belt sheath. Closes to a compact 6-3/4".

857
Vintage Marble's No. 2 safety hatchet was made by Marble Arms & Mfg. Co. of Gladstone Mich. Head and handle slabs tight. Very shallow chip the size of a ball point pen tip on one top corner of handle slab, but no cracks noted. Head measures about 4" long and axe is nearly 11" long. Nice hatchet may clean up with a little steel wool.

858
Awesome Rapala fsih grabber / scale looks pretty heavy duty and is about 10-1/2" long.

859
Pair of MCM locking ammo boxes are stackable and measure about 13-1/2" x 9-1/4" x 4-3/4" ID. In good condition. Would also make great emergency boxes in the truck.

860
Two dual mag couplers or holders, will fit your FA-MAS, M16, AR-15, XM, AK-47, AK-74 and G3 mags.

861
Super cool tactical cane comes apart into five sections, three of which have knife blades. Top handle with glass breaker knob. Bottom pad also screws off to reveal small post. In great condition, about 38" long.

862
Chicago Cutlery and other knives come in a wooden Gerber knife block. Plus a 14-3/4" Chicago Cutlery knife sharpener. Longest knife is about 13-1/2". Also incl 'Gaucho' knives by Adcraft.

863
Wooden Canvasback duck decoy is ready to finish, incl eyes. Measures about 12" long and is in good condition;

864
Large Tasco 8-32x44 rifle scope is bright and clear. Measures 20" long. Incl lens covers, great for elk hunting out west.

865
Chicago Electric VS rotary tool comes witha variety of Dremel accessories incl sanding drums, cutting wheels, more. Incl case for tool and bits. Smels a bit like brushes, runs.

866
Four HDX organizer boxes have removeable trays and customizable compartments, great for fishing tackle or precision shop work. Largest about 11" x 9" x 2".

867
Neat collection of aminal skulls, Seller notes snowshoe rabbit, porcupine, skunk, etc. Longest about 4-3/4".

868
Several Chicago Cutlery knives, plus a few others in a nice knife block. CC bread knife about 12".

869
Awesome children's tool kit incl 11" saw, wrenches, hammer, screwdriver, more. Plus several wooden guns. Great kit to get the kids into the life skill of a handyman.

870
Antique knives and forks by the Atlantic Cutlery Co. have bone or antler handles. Knives about 9-3/4" long, forks about 7-1/2". Nice pieces.

871
Several pairs of warm winter socks feel like wool.

872
Nice Zwilling J.A. Henckels 7" butchering knife was made in Solingen Germany and is about 12-1/4" long overall. Numbered 31118. Quality knife.

873
Four Chicago Cutlery knives great for processing your own deer or beef. Longer ones about 13-1/2". Quality knives. Numbered 78S, 66S, etc.

874
Two military style canvas packs with leather closures measure about 9" x 7".

875
Three canvas bags, most or all military. Pair of ammo pouches (possibly British) each about 10" tall, roll about 17" x 17" when laid flat. Markings incl C.W.L 1988, 1986, Touch Ammo Left, RFDPP 1984, more.

876
No shipping. DuPont Ho-Skor 700-X smokless powder can partially full with contents. Weighs 5 lb, 5 oz.

877
Zaplight stun gun by Zap is Model ZAPLT. Comes with box, cord, manual, case. Flashlight and stun part both work. Measures about 6" long.

878
Neat leather bag would be great for taking to the range. Plus a wooden box about 22" long. Bag about 15" x 9" x 9", neat piece. Box smells strongly and could be cleaned out.

879
Husky tiered rolling tool box or similar is in nice condition and measures approx 14" x 25" x 16" tall. Lockable, handle extends, another in lot 880.

880
Husky tiered rolling tool box or similar is in nice condition and measures approx 14" x 25" x 16" tall. Lockable, handle extends, another in lot 879.

881
US Military trunk or locker was made by Economy Mfg Co. Measures about 32" x 16" x 13" high not measuring handles. Handy storage, US printed on outside with wording inside as well.

882
Greenheck wall or heater mount fan has a General Electric 1/4 hp motor. Comes with frame measuring 20" x 20". Runs.

883
ATV seat is about 36" x 18" x 12" tall overall. Storage compartments in arms and back, plus cupholders and more. In good condition.

884
Bushrag Camouflage Systems size XL / XXL ghillie suit. Sleeves with adjustable elastic closures, zipper works. In nice condition, lining is good with no tears or holes noted.

885
Penncraft brand lockable tool chest with loads of storage for all of your Bennett Auction tool winnings. Includes keys and measures 17-1/2" tall x 20" long x 8-1/2" wide

886
Assorted cane fishing poles appear to make 3 poles. Each section is about 4-1/2 ft long. Darkest pole is from Kmart.

887
Two pieces of camofalge cover nettting, grat for deer blinds etc.

888
Four Mossberg gun rifle holder rack for the back of your truck seat or similar. The racks measure 25" tall.

889
Storage case for US Military Night Vision Goggles, model no AN/PVS-7A. Marked US Property and MFG by 55311.

890
Two pairs of Mossberg long gun holders or racks for the back of your truck seat or similar. The racks measure 25" tall.

891
Two camo blankets, and three sleeping pads.

892
Legacy Quest Outdoors wooden framed prints of a flag and portion of the 2nd amendment. Appears to be an NRA sponsor gift with 14 smaller US flags on sticks. Frames measure approx 17-1/4" x 13-1/2"

893
Wooden crate marked "Made in Russia" on front and side marked Knoxville, Tennessee, USA Intrac Corporation Small arms ammunition, consumer commodity. Outermost part of crate measures 19" x 14" x 6"

894
Pair of hard back gun cases. Black one has padding cut outs and features a rich looking crushed velvet interior; Brown gun case has eggshell padded interior and a couple of stickers on the exterior.

895
Trio of small coolers for your summer outings. Pair of Igloo lunch pail coolers for those quick little day trips; also a larger Thermos brand cooler. All 3 contain two ice packs within. Largest cooler measures 16" x 10" x 12" tall.

896
Stack-on brand locking gun cabinet for the storage of your 2nd amendment items, valuable currency, etc Includes keys and measures approx 21" x 10" x 18" tall.

897
Stack-on brand locking gun cabinet for the storage of your 2nd amendment items, valuable currency, etc Includes keys and measures approx 21" x 10" x 18" tall.

898
Iraq War era 9mm ammo can from another country, look it up. Both latches with holes for a lock, and overlapping eyes on front for a third lock. Measures about 20" x 12" x 8" overall.

899
US Military Vietnam War era insulated food cooler incl one compartment. Made by Knapp-Monarch Co. and in overall good condition with scuffs as to be expected. Measures abou t21" x 10" x 16" tall overall. Retains hinges. Neat piece of history.

900
Pair of hard plastic rifle cases. Blue American Spirit Arms measures 4 ft long; black DoskoSport case measures just over 4 ft long. Both have eggshell padded interiors.

901
Lever-style weed and small root puller. Measures just over 4 ft long

902
Pair of vintage macrame plant hangers are approx 3' long when hung straight.

903
Pair of retro macrame plant hangers are about 3' long. Some fraying noted, with wooden bead accents.

904
Marcame is coming back! Two totally retro plant hangers are about 5' and 6' long overall without pots in them. Neat pieces.

905
Down Under cotton oilskin trenchcoat, great for wrenching on cars or forging. Size XL, Style 8300. Comes with extra piece to extend the collar.

906
US Military Army Air Force insulated flying pants. The pants are type A-10, and size 42 and a 30 ish inch inseam. In good condition with a couple small holes noted on upper part of leg.

907
250 lb Howe storekeepers scale is of ornate cast iron construction. Measures approx 2' wide, 1-1/2' deep, and 2-1/2' tall.

908
Impressive elk antler rack, measures 33" wide inside the tines at the widest, and 29" tip to tip of the main beams.

909
Four matching Grote 5371 tail lights with brackets, great for your trailer or flatbed truck.

910
Drywalling or mudding tools incl. 12" puddy or mud hawk puddy knives, tile tools, screen sander, and more.

911
42 lb countertop scale by Buffalo Scale Works is quite delightful and will clean up well. About 1-1/2' long.

912
Plano Side by Side tackle box full of soft baits, lures, spoons, and more.

913
Pair of hard gun cases with locks. Black rifle case measures just over 4ft long, smaller green case measures 22" long.

914
Argon gas bottle is 17" with valve. Comes with some gas, will ship empty.

915
Attractive wine rack with door to put in your cellar or to start your collection of favorite local wines. Door on rack can be locked to keep out the sister-in-law. Rack stands 4-1/2ft tall.

916
Every home gym needs a punching bag! This Classic Canvas brand is 100% cotton shell. Includes the hanging chain to start working out right away.

917
Henry Repeating Arms brand neon clock measures approx 20" across x 6" deep. Clock mechanism runs. Neon tube is broken near one end but definitely worth fixing. These were allowed only to certain qualifying Henry dealers and are uncommon if not rare.

918
Pair of vintage The Arctic Fisherman brand ice tip ups. Probably a bust if you want to use them yet this year unless you live in the Arctic, but get them now and be ready for next year. Measure approx 23-1/2" long and made in Beaver Dam, Wisconsin.

919
Pair of NIP insulated ponchos feature aluminum coated interior for warmth. Package indicates 6 ft arm span and 5 ft length

920
People Meat Packing Co metal sign measures 16" x 10"

921
Scary black blow dart gun measures 43" long. Some minor finish imperfection on the length of barrel.

922
Vintage leather and wood horse hames with brass hardware made into a western style mirror. The mirror measures 32" x 19".

923
Get you a sauerkraut mandolin! This kraut cutter is 25" long. Some minor surface rust on the blades. Stamped T&D Mfg. Co, Indianapolis. Made in the USA.

924
Pair of Crimson Trace metal signs measure approx 17" x 11" One features language from the second amendment.

925
Rugged Mathie-Ruder Brewing Company brand wooden box with metal strap details. Measures approx 15" x 12" x 10"

926
Magpul 60 round AR-15 or M16 magazine. The Gen M3 PMAG has 60 round 5.56x45 or .223 cartridge capacity, and appears to be new. Fits several makes and models, see pics.

927
Get your emergency kit beefed up with these Wise Company brand freeze dried pasta alfredo with chicken. 5 years past the best by dates but packages are completely sealed.

928
Pelican 1300 Case measures 11" x 10" x 7" Foam is in nice condition.

929
Mitutoyo shock proof caliper that reads up to 6". The caliper is in good condition and comes in a case.

930
Bait and Tackle to toss into your fishing tackle box incl NIP Eagle Claw hooks, NIP South Bend brand Nylon Leaders, NIP Smithwick Rattlin' Lure, assortment of Mepps hooks, variety of sinkers and NorMark brand fish knife, more

931
6 unopened packages of Wise Company freeze dried meals in a mylar bag. All bags manufactured in 2012. Those with listed best by dates have expired but bags feel sound.

932
Pair of Fiocchi Ammunition boxes measure approx 11" x 5" x 7" tall

933
Quick Fire Cases glock case holds 2 glock pistols. Nice locking handles. Measures 11" x 10" x 5"

934
Two pairs of advertising carving kits incl. peerless knives pattented 1983, Steinecker's, J.J. Walker, WM.J. Straka Funeral Director, more.

935
Bernzomatic two burner propane stove measures 16" x 10" x 7" tall. Very nice little vintage burner.

936
New in Package HFS brand 2 in 1 Brake Bleeder and Vacuum Pump Test Tuner Tool Kit, model no 11896.

937
7 unopened packages of Wise Company freeze dried meals in a mylar bag. All bags manufactured in 2012. Those with listed best by dates have expired but bags feel sound.

938
Pair of Fiocchi Ammunition boxes measure approx 11" x 5" x 7" tall

939
Sweeney's brand Mole Trap appears to be NIP. All Steel construction.

940
6 unopened packages of Wise Company freeze dried meals in a mylar bag. All bags manufactured in 2012. Those with listed best by dates have expired but bags feel sound.

941
Pair of canteens for your hunting trip out West or Up North. Both feature a nice insulated bag that can be clipped to a belt or a strap carry.

942
Pelican 1400 Case for your handguns. Interior foam is in great condition. Case measures 14" x 12" x 6"

943
94" Adventuridge brand Extra Long Folding Table appears to be in good condition and comes with user manual.

944
2 pairs of men's snow pants. Green pair of snow pants are constructed of a canvas-like material perhaps military?? and lined with a removable insulation layer. No brand markings but tag reads C 56 and is stamped 1978 ERLA. Black pair are RefridiWear brand and size XL? They measure 23" straight across with a 30" inseam. Heavy duty metal zipper and buttons when they made those things well.

945
Wilson's leather brand men's black insulated leather jacket, size L. Leather is a little worn in high contact areas and is overall a little stiff but still lots of road miles in this jacket.

946
Prorider brand women's black leather vest. Size 46. Also includes a black Victoria's Secret brand black leather backpack style bag with fringe. Bag measures approx 14" tall.

947
8 Rapala and other fishing lures incl. lures up to 4-1/2" long.

948
Gamehide brand insulated camouflage overalls. Size 4X. Style number W28. 2-way double end front zipper as well as hip to ankle zippers.

949
Pioneer Wear brand brown leather vest. Size 44. Some imperfections in leather throughout.

950
Stearns brand boating vest, type III, size Adult Large. Khaki colored with pockets and Black Stearns ski vest, type III, size adult unversal

951
Pelican Hardback 1080 hand gun case and Doskocil hard hand gun case. Doskocil has foam layers to hold multiple guns. Smaller Pelican case measures 14" x 10" x 2-1/2" and has a long, strong locking mechanism.

952
A large variety of soft plastic lures and some Screwtail grubs NIP.

953
Plano Gun Guard pistol case measures 14" x 9-1/2" x 4-1/2" tall. Interior foam is in great shape.

954
Large assortment of ice fishing gear incl poles, NIP Trilene and Cajun Line fishing line, additional NIP Gudebrod Ice Line, more

955
Classic "bad guy" firearms and weapons training poster; tube contains "The story of a government that almost didn't happen" and a parchment replica copy of your Bill of Rights.

956
SmartLights snowflurry light for your LED light show and a string of Remington shotgun shell lights. Snowflurry light appears to be NIP.

957
Pair of Pelican brand hand gun cases. Larger case is a Pelican 1200 and seems to have replacement foam pieces inside. Smaller case is 1120 and appears to have original foam pieces.

958
Drago brand bag for all your things that need to be organized like maybe your reloading supplies. A pair of hand gun cases and a camouflage rifle case.

959
Up North style coffee table with glass top measures approx 4ft long x 2ft wide x 19" tall. Has a drawer to display your favorite pew pews and includes a nice section of green velvet fabric to stage your display perfectly.

960
Check out these Smith & Wesson mats for your reloading setup, sighting in practice, or for your man cave. Largest measures 17" x 11"

961
Very neat vintage rucksack backpack could possibly be Swiss Army? measures approx 22" tall. Feels waterproofed and leather is slightly stiff. Very cool piece.

962
Double bit Wedgeway axe, stamped Morley Murphy Hardware Co, Green Bay. Axe handle is tight.

963
Coleman brand folding table to set up at hunting or fishing camp. Measures apaprox 4ft x 2ft.

964
Extra Long Folding Camp Table appears to be in good condition and measures 8 ft long

965
Extra Long Folding Table appears to be in fair condition and measures 8 ft long. Some minor rust spots? on edges

966
Extra Long Folding Table appears to be in good condition and measures 8 ft long

967
Homelite 15" cut weed whacker is about 4-1/2' long. Untested as the tank is dry but engine has compression. Sometimes the older ones run longer than the new ones!

968
Set of 4 large ratchet straps up to 2-1/2" wide with custom trailer rail ends.

969
Black tactical mesh vest. No name brand found. Guessing adjustable up to a men's XXL? Made in China.

970
Hiking pack frame with some military parts, and a 3' long bag. The aluminum frame measures 20" x 12".

971
Brigs & Stratton Elite Series portable generator with a 10 HP Brigs and Stratton OHV engine. The generator has four 120 volt outlets, and a 120 / 240 volt outlet. Fires up, runs well, and all four 120 outlets work, 240 volt untested.

972
MacGregor baseball / softball umpire's mask and a pair of size 11-1/2 Men's Lange ice skates. Bottom of skate boots are marked PD4 00657. Some blade rust.

973
Assortment of spinner fishing baits. Most measure approx 2-3" wide

974
Spotted trout wall mount is 24" long.

975
Small, metal 3-drawer organizer with super cool looking finish. Measures 12" x 10" x 9" overall. Each drawer is about 2" deep.

976
Large 30-drawer organizer measures 36" x 20" x 12" deep. In its previous glory it was used as office supply storage and most recently as ammunition storage.

977
Equipto brand 18 drawer hardware organizer measures 34"x 11" x 13-1/2" tall. Has a few pieces of bonus hardware to get you started.

978
Aluminum food funnel and hand crank Squeezo brand food grinder. Perfect for making homemade applesauces, baby food, and more

979
Atlanta Stove Works brand, no 60, cast iron pot belly stove. Needs a little elbow grease if you want to use it, ready to go if you want to use it for decoration. Stands about 30" tall.

980
Nice variety of vintage buttons on button cards and loose.

981
Pair of 2 man crosscut saws ready to hang on the antiques wall or turn into your newest craft hobby. Longer is 66" overall. Both appear to have original wooden handles.

982
KLH speakers, model no 403A and Roadmaster 2 way speakers, model no RTS2000TM. One Roadmaster speaker has a dent. See pictures.

983
1970 Wisconsin Highways map, Illinois and Iowa maps, vintage Walther League booklets, short wave station list and Radio station markers book, others

984
Coleman Xtreme large ice cooler for all of your beverages and a handy wooden seated metal chair to take along with you.

985
4-1/2 ft long crosscut saw appears to have original wooden handles. Would be a beautiful piece to paint on or display as is.

986
Team Glock banner with grommets on edges and corners. Measures approx 5-1/2 ft long.

987
Cameron's stovetop smoker, 16" electric patio grill, Apollo 12v cooler / warmer, and a Crock Caddy slow cooker bag. Smoker about 14" x 10" id and comes with recipes. Car cooler about 13" x 7" x 10" tall and comes with cords, cools and heats. Bag in good condition. Grill heats.

988
Coleman Powermate VP201 air compressor with hose. Runs and develops low pressure but seems to need some work.

989
Two matching Zebco Dura Action two-piece fishing rods with Zebco 202ss reels. All eyes intact. Some small nicks in cork and foam, nothing major. Measure 66" long.

990
Washer toss yard game, each box is 16" x 16".

991
St Croix fishing rod with a Copperhead reel. 25SP-66MD. All eyes intact. Some minor imperfections in cork. Measures 6'6"

992
Nice Frabill Speed Shak Cub ice fishing shanty. Base is about 5-1/2' x 4' wide.. Features Arctic-Armour fabric,. In nice condition, a couple pipes not inserted for pics and one looks bent, but shanty is definitely useable without. Dual hole system in floor. Buy now for next year.

992A
4' pickup truck bed storage bag, about 20" high and 7" deep. All in good condition.

993
Pressed wood wardrobe stands about 4ft tall x 3-1/2ft wide. Needs a little drawer bottom work but would make a great little girl's dress up play closet.

994
NIP? Six Flags Battle Blaster Sting Ray pool toy, kids compound bow and arrows with practice tips, and NIP TimeIt brand Outdoor Mechanical Photocell Timer. Six Flags ticket coupon in the pool toy are probably expired :)

995
NIP Johnson Tangle Free Series Model TF10 fishing reel, plus Shimano, Zebco, and other Johnson reel.

996
Whitetails Unlimited brand fixed blade knives in a black canvas belt sheath. Longer knife measures 9-1/4" overall.

997
NIP Champion brand Duraseal Crow Spinner Target, model no 40949, is ready for you to practice your shot. Crow measures 7" tall.

998
NIP Browning RMEF fixed blade knife, marked model 780RMEF, and black canvas belt sheath.

999
2 pairs of blaze orange Remington neoprene gloves, sizes M & L. Pair of Stabilicers brand traction soles to strap onto your shoes to keep yourself upright on ice. Size M; pair of duenorth brand heel traction aids.

1086
NIP Bass Pro Shops floating pliers, Trilene 8lb partial roll fishing line, other Stren and Berkely fishing line, Weller lure, soft baits, more in a metal box about 11" x 8" x 4".

1087
Full or mostly full 100 piece box of Hornady .270 cal 100 gr spire point bullets measure .277 dia.

1088
Full or mostly full 100 piece box of Hornady .30 cal 110 gr round nose bullets measure .308 dia.

1089
Full or mostly full 100 piece box of Hornady .30 cal 110 gr round nose bullets measure .308 dia.

1090
Full or mostly full 100 piece box of Hornady .270 cal 100 gr spire point bullets measure .277 dia.

1091
Three vintage folding knives, plus other pocket knives. Names incl Sabre, Imperial, Hammer Brand USA, Evans, more. Longest about 3-3/8" closed. Some nice looking handle slabs in good condition with no cracks noted.

1092
Lyman T-C tungsten carbide resizing die for decapping and resizing cartridges for reloading. Comes with box. End of box reads 38 SP. 357 Mag. Measures about 4-1/4" long overall.

1093
Sentry 1100 fire resistant lock box with keys is great for a handgun or important papers. Measures about 12" x 7-1/2" x 3" ID. In good condition.

1094
Will ship without liquids. Airhead water tubing air pump with different nozzels, and a Hoppes No. 9 rifle cleaning kit. Both in good condition. Pump plugs into car and measures about 4" tall.

1094A
Southwire Seatek Series Roto-Split cable splitter measuring 7-1/2" long and in very good condition,

1095
Nice Hen & Rooster Special Production Run 1 of 200 fixed blade knife with sheath and box. Knife measures 10-5/8" long overall and is in good condition - blade, bolster, antler like handle slabs all tight and handles with no chips or cracks noted. Comes with matching leather sheath in great condition. Spanish made with German - Stainless marking.

1096
Daisy Powerline 880 pellat air rifle in .177 cal. Pumps and shoots, measures about 38" long overall. Nice Daisy squirrel scope. Stocks in good condition, great gun.

1097
Ten pieces of 1988 50BMG military brass cases. Heads are stamped IK. .

1098
Vintage Crosman Model '338 Auto' air pistol BB gun with original maunual, NIP Crosman Pellgunoil, Co2 cartridges, several bbs. In good condition. Measures about 8-1/2" long. Vintage manual in great condition. Gun brand from the Coleman Co.

1099
Coleman hatchet features nail puller notch on head and a non - slip handle. Measures 4-3/4" over head and is 13" long.

1100
Seller notes 120 pieces of Lake City 1968 brass.

1101
Lyman or similar reloading powder dispenser is 10" tall and in good condition.

1102
Vintage leather Shepler cowboy boots and a pair of Vibram combat style boots. Vibams in good condition with minimal wear, size 3-1/2W, about 10-1/4" over bottom, tag in tongue reads Altama. Shepler boots size 8-1/2D, Good Year soles, about 13" tall. Show some frayed threads and wear, but look like they have been recently conditioned.

1103
USBP (United States Border Control?) tie clip marked Sterling, vintage Jon-E hand warmer made by Aladdin Mfg. Co.; really cool Permanent Match lion lighter in good condition; several lighters incl Symbol, Austrian - made Champ, other; vintage Boston Lead Pointer box with good graphics, more. Hand warmer about 3-1/2" long. USBP clip about 1-5/8" long and weighs 6.7 grams.

1103A
Vintage Gillette Black Tip Super Speed safety razor is date coded W2 and made in the USA. Knob turns nicely and flaps open. Measures about 3-1/4" tall closed.

1103B
Vintage Nimrod Pipeliter was made in USA and measures about 3" long closed. Lighter sparks, neat piece.

1103C
Classic jaintor's "Key - Bak" key holder by Lummis Mfg. Co of Pasadena 8. Calif. Chain pulls and retracts, belt mount piece about 2-1/2" long. Buy and start using, sturdier than many pieces made these days.

1104
Vintage Zippo lighter, Peterson's art deco pipe lighter, other pipe lighter about 4-1/4" long. Peterson's about 3-5/8" long overall, whell siezed up but may be easy to fix. Other pipe lighter wheel turns but no spark, top piece near clip turns to increase or decrease flame. Zippo with three strikes on either side of marking on bottom and made in Bradford PA USA .

1105
Antique and newer fishing reels on a couple of vintage rods. Reels incl Bronson No. 2200 Green Hornet with heavy line, Atlas 1708 Model D by Kalamazoo Tackle Company, Zebco No. 33. Rods incl two-piece 65C6 six foot Spincast, and a sturdy Actionized steel rod about 5' long with cork handle. All eyes on rods intact. All reel handles wind smoothly, green one about 4" wide over handles. Great for the collection or for decoration at the cabin.

1106
Can ship without rod. Vintage Penn 9 Level Wind open reel on a sturdy 88" one - piece fishing ro with cork handle. Reel is outfitted with heavier line and measures about 5-3/4" wide over handle. Retrieve to Free Spool lever works, and ratcheting to silent switch also works; handle spins nicely. Mounting bracket marked 3ON-9. Rod in overall good condition; eyes are intact, cork fair to good, reel tightening nut is two piece and spins smoothly.

1107
Vintage St. Croix Tournament Fifteen Hundred No. 63-265 two-piece fishing rod was made in the USA. Measures 79" long overall. Eyes intact, string wrappings good with just one slightly fraying above top of bottom eye (see pics), cork good for age of this rod. Reel tightener screw moves easily. Great collectible rod.

1108
12" x 9" box of .223 Remington brass, and Winchester .45 Auto brass as pictured. Incl boxes. Reload for your AR-15 or similar.

1109
Nice climbing tree stand has a goot platform about 33" x 19" overall and a top portion with cushion seat. Black part of cushion with some mouse chews, replace or use as-is. Nice stand overall with backpack style straps for easy carry and clamp with knobs to hold it all together.

1480
No shipping and must be 21 to purchase. Full 1977 McCormick Elvis bourbon whisky decanter / music box is sealed and comes with original box & COA. Piece stands 15" tall, music box works.

1481
No shipping and must be 21 to purchase. Full 1977 Aloha Elvis McCormick whiskey decanter with tax seal intact and music box. Stands 16" tall, comes with original box and COA. Music box works.

1482
No shipping and must be 21 to purchase. Full 1977 Elvis Presley McCormick whiskey 'Elvis Presley 55' decanter is the 2nd in a series. Comes with original box, music box and COA. Decanter is full, tax seal in intact. 14-1/2" tall. Music box works.

1483
Ezra Brooks and Weston Springs Distilling Co. empty decanters. Stove stands 10" tall.

1484
Vintage serving pieces including lazy susan with five sections, measures 14" diameter - includes center piece with lid. Stemmed condiment server and a heavy glass candy dish with lid, a few chips noted. .

1485
Belgian made tapestry depicting a Middle Eastern scene measures 57" x 19".

1486
Vintage Oshkosh reindeer candle in original packaging. two Saalfield coloring books, vintage coaster set with original set.

1487
Vintage children's records including Jim Along, Josey; several Peter Pan Records, Happy Birthday record with sleeve; Mid-1970s Playsong records; yellow Disney records.

1488
Antique books including Cup of Gold, Tortilla Flat, Of Mice and Men - copyright 1937; others. Most by John Steinbeck.

1489
Vintage books including A Physician in the House, copyright 1897, back cover is detached; plus six published by Collier with mulitple short stores - copyright 1940.

1490
Framed silhouette is 12-1/2" tall; pair of vintage flower prints and two mountain scenes.

1491
Agfa Ansco Shur Shot box camera; five boxes of Polaroid film for The Swinger Model camera.

1492
Antique pocketwatch chain is approx. 13" long; Swiss made Remington wristwatch face, winds, runs and stops; Anson money clip; tie bar and two patriotic flag pins.

1493
Vintage Allster Knife Co. folding pocket knife; Urham Uplex razor; badger hair and other shaving brushes; styptic pencil by Walgreen Company; more. Straight razor handle slabs in good condition. Knive handle slabs are tight, 3-1/2" closed.

1494
No shipping and must be 21 to purchase. Full Jim Beam Bobby Unser Gurney Eagle racing car decanter, tax seal is intact. Decanter is 20" long overall and comes with original box.

1496
Antique straight razor with box; badger hair and other shaving brushes; Ever Ready and other clippers; 7" Cornell comb; Weck folding hair shaper, missing pin.

1497
Vintage souvenir postcards from Florida, Wisconsin, Minnesota, Washington, possibly others. All unwritten.

1498
Vintage souenir postcards - only one written, postmark 1945. Depicting Navy and several cartoons - all look to be the same vintage.

1499
Vintage postcards from Northern Wisconsin, plus US Naval Training Station, Great Lakes.

1500
Vintage postcards including cartoons, postcard books from Portland Oregon, Fargo, North Dakota, Bad Lands and more.

1501
Vintage cartoon-style postcards, all unwritten.

1502
Vintage cartoon-style postcards, all unwritten.

1503
Large and small grease guns with Marine and trailer, and other Grease, chimney brush, ladder or similar hanger, more.

1504
Blue Ball jar, Danish oil, GE radio, a bail top jar, more.

1505
Fly fishing reel, two open spinning reels, and a pair of enclosed reels.

1506
11 jigsaw puzzles up to 500 piece.

1507
Stanley tape, Ryobi countersink, rubber mallet, ratchets, and more.

1508
Stanley and other screwdrivers, nut drivers, and pliers.

1509
Sturdy wood duck house, measures 11" x 12" x 21" tall. Hole measures 4" diameter.

1510
Craftsman screwdrivers, nut drivers, pliers, Vice Grips, more.

1511
Brass anvil, measures 4" long, vintage hardware, rivets, more. Wll ship without matches.

1512
General brand drill grinding attachment, model no 825. Includes instructions and original box.

1513
Black & Decker 7-1/4" circular saw, model no 7359, 10Amp, 5300 RPM. Runs.

1514
Plumb brand axe measures 18" overall. Axe head is tight.

1515
Assortment of hand saws incl Stanley Handyman saw, hacksaw and a bow saw. Stanley measures 30" overall.

1516
That'll buff out! Car polisher stands 8-1/2" tall and buffing head measures 9" across. Runs.

1517
Weller soldering gun, model D-440, has a spliced cord but otherwise in good condition, and heats.

1518
Claw hammer and ball peen hammer. Claw hammer head needs to be tightened a bit. Peen measures 14" and claw is 13" long.

1519
Black & Decker and Skil brands jig saws. Black & Decker model no 7580 and 3 Amps; Skil model no 81497 and 3.2 Amps. Both tools run.

1520
Schumacher 6/2 Amp Dual Rate Battery Charger has a small amount of tape on the cord where the cord was nicked. Perfect for your old tractor and old submarines.

1521
Black and Decker, and other drills incl. a right angle drill, and a regular drill. Both tools run.

1522
Black & Decker 7-1/4" circular saw comes in a fantastic orange metal locking box. Cord appears to have been repaired. Runs.

1523
Variety of hand tools incl an Arrow T-50 staple gun, a couple of adjustable wrenches, T15 bit driver, Stanley line level, more.

1524
Seller notes 500 pieces of .308 Winchester brass.

1525
Seller notes 1000 pieces of .308 Winchester brass by Federal.

1526
Seller notes 500 pieces of .308 Winchester brass.

1527
Seller notes 500 poeces of .308 Winchester brass by Federal.

1528
Seller notes 500 pieces of .308 Winchester brass.

1529
Seller notes 500 pieces of .308 Winchester brass.

1530
3 pieces of Creekside brand camouflage rolling luggage. All 3 pieces measure approx 21" x 15" x 8" All zippers appear good and functional. One suitcase has a broken piece on the front. See pictures for detail.

1531
Large purple tote and metal tool box. Tool box measures 20" x 9" x 9-1/2" tall.

1532
200 pieces of .308 brass ready for your reloading projects.

1533
400 pieces of .40 Smith & Wesson brass made by Federal all set for you.

1534
416 pieces of .40 Smith & Wesson brass made by Winchester ready for your reloading

1535
200 pieces of .308 Hornady brass ready for your reloading projects.

1536
Sony LBT-D250 Compact Hi-Fidelity Stereo System with detachable wire speakers. System has 5 disc CD player, cassette tape deck and radio capabilities. Comes with remote and antenna.

1537
Sanyo 3 disc CD player, cassette tape deck, and radio system with 4 detachable wire speakers. Also comes with a remote and typewriter tape.

1538
Vanner Power Group SineWave Inverter, model no IT12-1600. According to sticker on device, it is a land/recreational vehicle power inverter. Unit measures 16" x 14" x 8" and includes attached mounting brackets.

1539
Double basin stainless steel sink measures 32-1/2" x 18-1/4" with 9" deep wells. 3-1/2" drain openings. Appropriate for drop in and undermount installations.

1540
Delta Pro truck bed tool chest / storage box measures 60" wide at shortest width and 70" across at the longest width. Box has 17" total height.

1541
18 puzzles up to 300 pieces, cross word puzzles, more.

1542
10 spring clamps, Irwin pipe clamp top jaw, hammer, file, level, and more.

1576
Husky 1/2" bracker bar, is 15" overall, a Husky 1/2" speed wrench, and 1/2" extensions up to 10" long.

1577
A large variety of hex key wrenches incl. Allen and others up to 9/16".

1578
Assorted wrenches, many sizes and conditions.

1579
Plethora of screwdrivers for your toolbox. Most are regular flathead screwdrivers.

1580
Nice collection of box end wrenches incl. Husky, Blackhawk, and others up to 1".

1581
Two NIP sets of Rockwell High Speed Jointer Knives, no 37-659 for a 6" jointer.

1582
Pair of toolboxes for your garage or truck. Black Hyper Tough brand 19" includes removable organizers, missing latches, and green metal Park brand is pretty rusty but still usable

1583
Nut driver sets, most are marked U.S.A. The black andeled set appears to be complete.

1584
Sockets incl. 1/2", 3/8", and 1/4" drives. Largest socket is 1".

1585
Assortment of adjustable wrenches and a trio of adjustable pliers, Master brand padlock and keys. Largest wrench is 10" long.

1586
Sockets incl. 1/2", 3/8", and 1/4" drives, 1/2" to 3/8" conversions, most larger sockets are by Allenite. Largest socket is 1".

1587
Nice variety of hand tools to toss into your toolbox incl hacksaw, Stanley utility blades, pry bar, putty knife, Red Devil brand drywall mud knife, 3M electrical tape, Hole Saw Mandrel with 5/16 Shank, more

1588
Sockets incl. Armstrong, Wright, Industro, and others, largest socket is 1-1/4".

1589
Portable Propane Convection Heater in box, adjustable heat output up to 80,000 BTU, push button ignition. Made in the USA. Heater runs but flame is yellow. Needs some tuning or work.

1590
Nice selection of Williams and other phillips and flat head screwdrivers and hex nut drivers. Longest screwdriver measures 13" long

1591
Plethora of screwdrivers incl. Oxwall insulated electricians scrwedrivers, and others in a variety of sizes.

1592
Smith's brand Unbreakable Ceramic Sharpening rods to sharpen all the knives in your arsenal.

1593
Cast Iron Tea Pot would be great for decoration. Measures 10" wide.

1594
Assortment of hand saws, Pop rivet tool, Lufkin folding ruler to measure up to 72" and more.

1595
Indestro Select brand ratcheting wrench set. Largest measures 10" long. Sizes 1/4" - 15/16". Nice set.

1596
Nice selection of phillips and flat head screwdrivers, longest screwdriver measures 11" long.

1597
Milwaukee, Black and Decker, and other drills with 1/2" and 3/8" chucks. All run.

1598
Box end wrench set up to 7/8" neatly packaged for the tool box. Made in U.S.A.

1599
Wiss and Pexto tin snips, larger pair measures 11" long and both are in good condition.

1600
Pair of Durbin Durco Midget chain binders measure 11" from handle to pin.

1601
Husky 1/2" bracker bar, is 15" overall, a Husky 1/2" speed wrench, and 6" extension with 3/8" drive.

1602
Pop rivet tool, model K110, for the DIY riveter.

1603
Ridgid 18" pipe wrench with a straight handle, and good sharp jaws.

1604
Husky 1/2" drive speed handle, and two 1/2" extensions, longer is 10" long.

1605
Black & Decker 12A leaf blower and vac with components. Model BV6000, runs up to 250 mph. Sucks and blows. Measures about 42" long over nozzel as pictured. Notch cut out of handle.

1606
Wilson's Leather brand men's insulator leather jacket, size M. Leather appears worn on high contact areas.

1607
Unique yellow enamel plate and covered bowl, green coffee mugs and a ginormous enamel coffee cup for the serious coffee drinker.

1608
Nylint dump truck and Tonka concrete mixer truck like you had as a kid.

1609
Stanrite brand sign and display easel set, model no 350.

1610
"The Essential Whole Earth Catalog" and "LSD: Still with Us After All These Years" books for your enjoyment. Super-de-duper interesting.

1611
Aircare 1041 Super Wick. See pictures for compatibility

1612
Fostoria or Indiana Glass flame pattern candleholders would make for gorgeous table decoration. Each stand 8-1/2" tall.

1613
Hobby Train Transformers and General Model Railroad reference ruler, no 1251, Ho, N, and S Gage Scale.

1614
50/50 wooden crate measures 18-1/2" x 11" x 10

1615
Set of 4 Casters, Bright Ring Shank Drywall 1-3/8" nails (less than quarter full), 8D 2-1/2" deck nails (less than quarter full), and 3/4" galvanized roofing nails (nearly full), more

1616
A huge assortment of hand tools, mostly combination wrenches, some open wrenches, files, hoof nippers, more.

1617
Nice variety of metric and SAE combination wrenches up to 1" and 22mm.

1618
Stanley screw drivers, Ace hex nut drivers and more. Longest screwdriver measures approx 13" long

1619
A plethora of Craftsman and other drill bits for your workshop toolbox, 7" NorZon grinding disc, pair of adjustable wrenches, more.

1620
Two pipe flaring kits incl. two clamps and holders, and a Blackhawk pipe cutter.

1621
Totes adorbs Babco brand fine thread 3" bench vise marked 603 with nice grab, Lufkin 50 ft tape measure and electrical wire stripper. Vise jaws measure 3" wide.

1622
Screwdrivers and a little more, both Phillips and regular head, and a couple of Torx drivers.

1623
The best "kid's" toys ever! Weller solder gun, model Standard 7200, with additional soldering tips, pair of Weller brand wood burners, model SP-23, and other.

1624
Framed Pabst Blue Ribbon advertising print.

1625
AC Oil Filters sign.

1626
Brinkmann Smoke 'N Grill

1627
Old-style fuel filters with catchpole.

1628
New, unused 26 quart soft side cooler will hold 36 cans and measures 18" x 10" x 12".

1629
Double bit axe head

1630
Drywall tools.

1631
NRA duffle bag is in good condition.

1632
To be updated

1633
Bow saw

1634
To be updated

1635
Pick axe, singe bit axe head and a replacement Aztec hickory handle.

1636
Two engine starters. The first shows little use and turns by hand, feeling about like a new starter should. No. 050368 and 012721. Second starter shows more use and turns by hand a little harder, No. 041365 and 061019. Are these Kubota?

1637
Two Kubota fuel filters, NIP. Two heavy steel brackets No. 20827961. Another cast iron piece approx. 6" square.

1768
Very nice Schwinn 470 Journey 4.5 elliptical is in great condition. Comes with manual.

1769
Schwinn Airdyne exercise bike is in great condition.

1802
Game calls including Lohman Deer Model 33; Faulk's Crow Call; another call.

1803
8" and 10-3/4" J. Marttiini filet knives with matching sheathes.

1804
Vintage Weems Wild call for fox, wolves, cats comes with original box and paper.

1805
Long range fox call by Bunham Bros., Perfect Squirrel Call and Perfect Deer Call by P.S. Olt, and Primos Power Owl call.

1806
Gerber knife sharpening stone with leather sheath measures 8-3/4" closed.

1807
8" and 10-3/4" J. Marttiini filet knives with matching sheathes.

1808
Gerber Mini-Magnum leather knife holster with Gerber sharpening stone measures 8-3/4" long

1809
Three leather belt mount ammunition holders made by Hunter and Eubanks. Hunter is numbered 538-12 and measures 7" long. Other two are numbered 130-06 and measure 10-1/4" long.

1810
Die cast Amoco 1950 gas pump replica coin bank. Box is 11" tall.

1811
Handcrafted duck decoy type ashtray base was made by the Grand Rapids Carvers of Michigan and is outfitted with a Hyalyn No. 771 tray. Tray in good condition. Wood also in pretty nice condition and would shine with a little wood oil. Base measures about 13-1/2" x 7-1/2".

1812
Four pocket watch chains or fobs, up to 17-3/4". One swivel link is marked Radio, other gold toned swivel link is marked L&R, pearl accent chain's swivel hook is marked Numium.

1813
Die cast Ertl 1932 Ben Franklin Limited Edition Ford Delivery Van coin bank with key is 6-1/2" long overall. In good condition.

1814
Diecast Ertl 1913 Ford Model T Pet Milk Van coin bank with key. In good condition, with just some slight scuffs noted on one side. About 6" long. Box looks appropriate but label on bottom reads a different model.

1815
Ertl Collectibles Texaco Petroleum Products 3443 Ford Tri-Motor Racing Champions airplane is about 12-1/2" over wingspan. Die cast, Issue #7. Comes with key and is in good condition.

1816
Die cast Ertl United Van Lines 1917 Ford Model T Van coin bank with key. In good condition and measures nearly 6" long.

1817
Ertl 1951 Ford Pickup Truck die cast coin bank promotes Wix Filters. Comes with key measures 8-1/4" over hitch. In overall good condition with just a couple of small scratches on top of cab and a few little paint chips on passenger side rear, looks like it went down a gravel road.

1818
Die cast Ertl coin bank is a 1913 Ford Model T Van replica that promotes 1867 Nova Scotia Canada. In good condition. Comes with key and measures nearly 6" long.

1819
Liberty Classics Limited Edition Sunsweet Prune's 75th Anniversary Edition Ford Model 'A' Van coin bank with key. In good condition, about 6" long.

1820
Die cast Ertl 1/25th scale Steelcase 1905 Ford's First Delivery Car replica coin bank. No. 3428. Needs bank panel and key, or just display this nice piece as it is. In otherwise good condition, about 5" long.

1821
True Value Hardware No. 20 fire engine coin bank is about 7-1/2" long. In good condition, just find a key from your collection that fits it. Back reads 'A TruServ Company'.

1822
Vintage coin bank was made by Banthrico, Inc, of Chicago USA. Nice piece measures 5-1/2" long and is in good condition, just add key.

1823
Vintage Ertl die cast Montgomery Ward 1932 Ford Panel Delivery Truck or Van Collector Coin Bank is No. 5 in a series. Comes with original box and is No. 2110. Incl key and is in good condition.

1824
Die cast Ertl #1 Texaco NR-7955 airplane is 12" wide. Officially Licensed Product, side reads 'Texaco 5' and 'The Texas Company Petroleum Products'. In overall good condition with reasonable small reasonable chipping in front and rear wings noted.

1825
Die cast 1/18 scale Road Signature 1968 Shelby GT-500KR muscle car with box and stand. No. 92168. In good condition; and doors and hood open and wheels turn. Measures about 10-1/4" long.

1826
Ertl Collectibles die cast metal 1956 Ford Pickup Truck in original box. Box is 9-3/4".

1827
Ertl, Matchbox, National Motor Museum Mint, other model cars, some die cast. Longest about 6-1/4", crate bed truck is 1/43 scale. Ertl about 3-1/8" long. Matchbox made in England and incl Coal & Coke, Colman's Mustard, Lipton's Tea. Pieces in good condition with just one paint chip noted on front of Coal truck. Nice pieces.

1828
Catepillar 365BL Series II model excavator by Norscot Group, 1/24 scale 1964 Mustang, Ford Motorcraft semi tractor and trailer by Matchbox, Classic Collection Mercedes Banz model car with box, 1/43 scale Motor Max 1949 Mercury replica model car. All in good condition, Cat bosy about 4-1/2" long. Semi about 7" long overall. Buy the car of your dreams here and enjoy looking at it from the comfort of your chair, save on price and space in your garage.

1829
US Military and other pieces incl Sterling Silver 1943 MCPC pendant, Sterling 1K Rifle bar, USMC pin marked 592, two screwback buttons that look like USMC, three US Army buttons made by Scovill Mfg. of Waterbury and Bliebmann Mfg. of Newark NJ. Sterling pieces weigh 9.1 grams total, bar about 1" wide. Largest pin about 1-1/8" tall.

1830
National Motor Museum Mint pieces and more. Model cars up to a liitle over 5" long. Four in good condition, one needs a little glue.

1831
Die cast metal Ertl Collectibles 1936 Ford Panel van with Minneapolis Star Wired Photo graphics. Comes with original box.

1832
Liberty Classics and SpecCast Limited Edition die cast coin bank vehicles incl 1948 Ford, 1937 Ford Schwan's 50th Anniversary, 1934 Ford Good Year car. All in good condition with keys. Trunk doors open to show coin slots.

1833
Maisto 1/18 scale 1956 Chrysler 300B car, Redbox 1937 Ford Pickup truck, and other on base. All three in good condition with doors and such that open. White car about 11" long.

1834
Liberty Classics Heddon Fishing Lure 1916 Studebaker die cast replica coin bank with key (Limited Edition), Ertl die cast 1918 Runabout replica Ben Franklin coin bank with key, Ford Texaco truck with die cast collector gas pump, two classic street cars. All pieces in good condition. Ertl is 5-1/2" long, Heddon is about 6" long.

1835
Ertl Collectibles die cast 1/25 scale True Value Hardware Ford Pickup Truck with coin bank crate load. Comes with box. Packaging has been opened but truck is in good condition.

1836
Liberty Classics Limited Edition Clark Ford Model A die cast pickup truck coin bank with oil crates is Fourth in a Series. In good condition, measures 6" long. Comes with key and box.

1837
Will ship without tin. US Military buttons, 1-3/8" tall RAU US military belt buckle, 3-3/4" tall patch, more. Widest US Army pattern and is 1-1/2" wide. Incl five large and six small USMC Serial No 176 buttons by WB Co. Several 1" US Military pins marked 623, LR, M21, etc. Other neat pins, look them up. Cool pieces of our military history and more.

1838
Sterling piece marked with a P; plus Buck, Remington DuPont, and G96 No. 920 leather knife sheaths and three pocket watch cases or similar. Remington sheath about 10-1/4" overall, black ones about 9-3/4" and 8-5/8" overall. Sterling inscribed on back "W.E.Brandt' and measures 2" x 1-1/8", weighs 19 grams.

1839
Vintage Silva 'The Ranger' Type 15T was made in Sweden and comes with leather case. Measures approx 4" x 2-1/2". Latch on lid resembles a rear rifle sight. Compass arrow works and points north. Crack noted in mirror, otherwise both compass and case are in good condition. Measures in cm / mm and in and 1/10".

1840
Vintage liquid filled compass, and a Suunto M3 compass made in Finland. Suunto about 4-3/4" x 2-1/2", works. Other about 1-3/4" wide.

1841
Two Zippo lighters were both made in Bradford PA. Both are five-bar hinges. One has a single bottom dash. The other has four and three bottom dashes.

1842
Vintage row boat oar locks and brackets up to 7".

1843
Five lighters up to 3-1/4" long. Red one with coil that heats. Dragon one lights with double flame. Other coil one sparks but but coils do not turn color.

1844
Vintage Barlow B16 butane lighter with case. Sparks. Measures about 2-1/4" tall and is in good condition.

1845
Brunton Model 8040 compass with case. Looks accurate, measures 3-3/4" x 2-1/2" and is in good condition.

1846
Ronson, GS King, Windmill, other lighter. Butane and other, tallest about 3".

1847
Antique compass by USAnite, case marked 'ENG DEPT USA 1917'; other compass is approx. 1-3/4" diameter and a smaller, pendant style compass that measures only 3/4" diameter.

1848
Westclox 'The Conductor' pocket watch has locomotive reproduced on back and comes with case and papers. Winds continuously, hands set but couldn't get it to run. Comes with neat chain and may be easy to get going again.

1849
6-1/2" long Walco pipe wrench box has clear graphics on one end and box jointed corners - contains US marked compass case, other similar style case, percussion cap tin, and a Scripto lighter case.

1850
Swiss made Park Watch Co. 2 jewel unadjusted stopwatch runs, stops, resets. Looks like it winds but is currently would tight. Numbered by gears 'No. 3364' and '457347'. Also numbered inside of outer back panel '455554' - unique numbering sequence, Crystal detaches but should resecure with a dot or two of glus. Looks like some hailine cracking near smaller face, but minor overall. Switch slides nicely and button pushes smoothly. Measures about 2" wide.

1851
Vintage Swiss Made stopwatch winds, runs, stops, resets. Measures about 2" wide. Unique manufacturer marking on front.

1852
Retro Hanhart Pic Jewelled stopwatch made in Germany. Winds, runs, stops, and resets but sometimes will stall out and with a little shake will start again. Measures about 2-1/4" wide. Really neat graphics on face. Crystal in good condition.

1853
Vintage Swiss made Super Select stop watch is 2-1/4" wide. Winds, runs, stops, resets. In good condition, edge of crystal looks like there is some glue around it.

1854
Antique brass trench art lighter features half cent panels on sides and still retains fuse cap. Coins look to be Great Britian or United Kingdom. Measures 1-1/8" wide and 5/8" thick. Unique piece. Reverse side cent reads 1940 - coin is WWII era.

1855
Suunto Co. Helsinki Model KB-14 / 360Q compass is about 3" x 2". Is this a sighting or quadrant compass? Looks like it works. Back reads 360 degree Cotangens. Made in Finalnd and is numbered 011376.

1856
Antique German made Wanderer map plan measure with route marker features a compass on back and comes original leather case and instruction paper. Measures about 3" tall over loop. Roller wheel works, as does marker and compass. Neat piece measures both miles and nautical miles on a map.

1857
Antique brass Soo Line railroad or railway lock key made by Adlake. Ring marked with an S. Measures 2-1/8" long overall and 1" wide over loop.

1858
Antique Cutiecut German map plan measure converts centimeters to kilometers, inches to miles or verstes, and shows statute miles, kilometers, and nautical miles on the other side. Measures about 3" long over loop. Wheel turns needles, neat piece. Comes with leather case.

1859
Vintage Zippo lighter was made in Bradford PA and comes with leather Zippo belt pouch. Features a five bar hinge system and is marked on bottom with three strikes on both left and right.

1860
Vintage and newer comapsses all look like they work. Put one in each car, cause up here cell service is not guaranteed. Largest nearly 2" wide.

1861
Four Zippo lighters are all about 2-1/4" tall. Two gold ones do not spark, but black and silver ones do. First two may just need new flint. Two marked Bradford, PA.

1862
Two vintage Gillette shaving razor blade boxes, and a folding thinning shaving razor that opens to 7-1/2" overall. Neat boxes measure 2" tall.

1863
Two compasses that look like they may have glow in the dark dots on the dials, and one that the top doesn't want to open on. Two that I could open look accurate and measure around 1-3/4" wide. Stabilizer works

1864
Die Cast metal 1930 Model A Convertible Roadster with See's Candies graphics.

1865
Pocket watch chains up to 15-3/4" overall, plus a necklace measuring 11-1/2" clapsed and more. Both gold and silver toned hooks marked Swank.

1866
Die cast metal Ertl 1932 Ford panel delivery locking coin bank with Anheuser Busch graphics, 1/25 scale. Appears to be in original box.

1867
Heavy die cast metal 1912 Ford Red Crown Gasoline replica delivery truck, 1/24 scale. Appears to be in original packaging.

1868
Die Cast metal, Premier edition 1940 Ford panel van replica with Menards graphics. 1/32 scale. Comes with a display case and in the original box. Crack in the display case top.

1869
Heavy die cast metal 1912 Ford Pepsi Cola replica delivery truck, 1/24 scale. Appears to be unopened in original packaging.

1870
Die Cast Metal 1936 Ford Pickup replica, item no 36FDPK, 1/32 scale. Measures approx 6" long. Comes with original storage box.

1871
Die Cast Metal Ertl 1913 Ford Model T locking coin bank, stock no 7634. Appears to be in original packaging and unopened. 1/25 scale.

1872
Shakespeare Company Fine Fishing Tackle Die Cast Metal Collector Replica truck, model no 10-1638 "Tackle" 2nd in the series. Measures approx 5-3/4" Comes with original storage box

1884
Will ship without matches. Bug out bag holds emergency blankets. Jon-E GI hand warmer with case, Uco candle lantern, collapsible cup. fire starter bar, more. Fieldline bag about 13" long. Great for the truck or wife or kid's car.

1885
Gun, hunting, shooting books including Shooter's Bible, Gun Digest, Black's Wings & Clay, Shooter's Guide to Rifles, more.

1886
Die cast 1/24 scale Red Crown Gasoline 1912 Ford Tanker limited edition coin bank is new in box. Made by Gear Box Toys. Key includes.

1887
Die cast Craftsman Tools 1928 Chevy collector's coin bank is No. 4 in a series, key included. Box is 8-3/4" long.

1888
Pocket watch chains - some newer and some older. Gold toned, flat chain clip is marked Swank and measures 18-3/4" overall.

1889
Wonderful antique lockable chest with lift-out tray measures approx. 20" x 11" x 10" tall. May have been a tool chest at one time.

1890
Antique Hercules No. 6 Blasting Caps crate has box jointed corners and measures approx. 17" x 5-3/4" x 6" high. Nice graphics and sturdy crate.

1891
US Military and other match safes - will ship without matches. Three similar are each about 3" tall.

1892
Marble's compass looks to be accurate and measures about 1-1/8" wide. Works. Quality piece.

1893
Vintage Emergency Signaling Mirror (ESM/1) was made by General Electric Co. Measures 4" x 5" and could be used to signal a pilot in an airplane when in need of rescue.

1894
Vintage promotional Zippo lighter with box and instructions. Made in Bradford PA with four mark and three mark pattern on bottom. Advertises Harnischfeger P&H and has a five bar hinge. Box in overall ice condition with displayable graphics on front of box.

1895
Will ship without matches. Antique brass match safe or similar and another old match box with hinged lid. Box about 2-3/4" x 1-3/8" Other is 3-1/2" x 1" and has a 'false bottom' type piece in lid.

1896
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth. Measures about 2-3/4" long. Lid seal still intact.

1897
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth. Measures about 2-3/4" long. Lid seal still intact.

1898
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth Measures about 2-3/4" long. Lid seal still intact.

1899
Antique Marble's waterproof match safe or pocket match box was Patented in 1900 and made in Gladstone Mich USA. Opens and hinges feels pretty smooth. Looks like there is a small amount of corrosion on inside rim and on bottom of inside as to be expected. Measures about 2-3/4" long. Lid seal still intact.

1900
US Military match holder with built-in compass. Measures about 3-1/4" tall. Compass looks accurate and cork in lid is in good condition. Old hard plastic case looks pretty good with two small cracks noted near foot. Neat piece.

1901
WWI era US Enigineer Corps brass compass by Cruchon & Emons Serne. Compass is marked on back 'No. 51529' and has matching numbering on inside of lid. Steadyer and adjustment work, and compass points north as it should. Measures 2-1/8" over top of case. Neat piece. .

1902
Pre-1963 Everdry pocket match safe by the Park Sherman Co. of Springfield ILL, and another vintage match box marked Justrite. Come shallow dents in the Justrite, but none noted in other. Measure slightly on either side of 2-3/4".

1903
Antique Marble's pocket match box with original box was Patented in 1900 and made in Gladstone Mich USA. Waterproof match box / safe opens, hinges feels pretty smooth Measures about 2-3/4" long. Lid seal still intact. Box with nice colors and good graphics. Only missing one flap and bend noted in one edge, minor details considering we usually don't see the boxes wtih the safes at all. Bottom box flap reads No. 181. Great set would make a nice investment.

1904
Antique ESS Co. padlock with key is marked 'Fraim' on back of arm. Reminds me of railway switch lock and measures approx. 4-1/2" overl bottom link. Key works and padlock is in good condition.

1905
Two knife scabbards and two leather fixed blade knife sheathes up to 19" overall.

1906
LED magnifying head lamp with multiple magnifying lenses and instructions. Works, great for precision work.

1907
Vintage advertising pocket knives and others. Folding knife names include Campco, Imperial, USA, others. Longest is about 3-1/8" closed.

1908
Vintage wooden shipping crate was sent from England to the US and measures approx. 13" x 9" x 8" tall.

1909
Antique Jello crate reads 'The Genesee Pure Food Co. Leroy N.Y.' Bottom of crate faintly reads Milwaukee Wis. Awesome piece with good graphics. Measures approx 14" x 8" x 6-1/4" tall.

1910
Will ship without liquid. Lansky Sharpeners knife sharpeneing kit features fine, coarse, and medium stones, plus vise and permium sharpening oil, and more. Case about 8-1/2" wide and 4-1/4" deep.

1911
Knife sharpening supplies and more including Smith's sharpener with sheath, two flashlights with cases, Sportmen's Edge diamond knife sharpener, more. Sportsmen's Edge did not run, may be an easy fix. Flashlights work.

1912
Magnifying goggles by OptiVisor, Conduct-A-Lite inspeciton kit and a stethoscope - great for lock work.

1913
Two stage Crock Stick knife and scissor sharpener with box. Looks complete and is in good condition, about 10-1/4" long.

1914
Skeleton keys, barrel keys and other keys up to 2-3/4" long.

1915
Vintage tractor suicide knob is about 2-3/4" x 2-3/4" over mounting bracket.

1916
Two antique straight razors, one with sheath. Green handled razor by Cataraugus Cutlery of Little Valley, New York. Other by Klas Tornblom No. 750R of Sweden. Both are in good condition, handle slabs and blades look good.

1917
Antique box jointed sewing needle box is filled with a nice variety of polished rocks. Box retains original labels and once held Goodyear Welt or Turn No. 43 needles made for United Shoe Machinery Co. Box is approx. 3-1/4" wide.

1918
Padlocks by Master Lock Co. & others measure up to 2" tall.

1919
Caterpillar tag promotes Brebner Machinery Co. of Marinette & Green Bay, Wis. Necklace with bullet and a 2" military-style tag.

1920
Three vintage match safes are each about 2-1/2".

1921
Antique railroad padlock with key is marked 'C M & St P RR', presumably Chicago, Milwaukee & St. Paul Railroad. Other side is marked Store Dept. Key works. Body measures about 2-1/2" wide.

1922
Antique railroad RY EX. AGY (presumably Railway Express Agency) padlock was patented 11 21 05 and was made in USA. Measures 3-1/2" overall.

1923
United States Navy No. 2 Admiralty solid brass padlock was made by Jas. Morgan & Sons, measures 4" overall. Retains sliding keyhole cover and features four brass levers.

1924
Vintage No. 2 Tour padlock with key measures about 4-1/2" overall. Marking noted under 'No. 2 Tour' looks like a propeller.

1925
Unique whistle measures 4-1/2" overall and comes on a chain.

1926
English-made Schlitz beer luggage tag or fob measures 4-3/4" overall.

1927
Vintage Adams dissecting kit includes Justrite knife with sheath, scissors, tweezers, more. Kit measures approx. 7" x 4".

1928
US National Defense medal measures 2-3/4"; French WWI military medal pendant measures 1-1/2".

1929
Brass Winchester belt buckle measures approx. 1-3/4 x 2-1/2"; vintage Junkunc lock No. 606346 combination lock measures 2-1/2" with combo; other lock with key.

1930
1958 State of New Hampshire resident hunting & fishing licence - deer tag; 1959 and 1975 Pennsylvania resident fishing license buttons. Largest is 1-3/4" x 2-3/8".

1931
Bass Collector Series token includeing The Duel, Pursuit, Gotcha, Patience; plus 1962 Minnesota Twin schedule token sponsored by Minneapolis Savings & Loan; NRA, Bass Collectors and other tokens.

1932
Vintage compass made by W. & L.E. Gurley of Troy, N.Y. USA. Looks accurate and measures 2" wide. Spin stop button on side works. Neat piece.

1933
Heavy brass Natural Sine nautical / ship compass with level is 2-3/4" wide. Compass points north accurately. Lever on bottom moves levels. Hinges work. Very neat piece. No identifying markings noted except for chart on front.

1934
Vintage military compass by Keuffel & Esser Co. was made in New York and comes with a Dietzgen USCM (United States Marine Corps) leather sheath. Looks accurate. Measures 3" x 3-1/4". Latch works. Noted but unpictured is about half of the paint on back is chipped off, but overall wonderful piece. Peep hole on top lines up with mark inside of rim and across cover for accuracy of direction.

1935
Nice compass points north when it should and would be easy to throw in a pack. Measures about 3" long closed and is in good condition.

1936
Vintage Carac Alt Meter / barometer with case. Measures about 2-3/4" x 2-3/4" over case.

1937
Nice looking Pulsar Analouge quartz men's wrist watch with World Time, Alarm, Calender, Time and Chronograph. Comes with case and papers. Type Series WR (Cal. N94J). Face measures about 1-3/4" over edges. Scratches noted on back, and on clasp. Currently not running but may just need new battery. Attractive watch.

1938
WWII Schick Inc. US Navy stadimeter is marked on tag BU Ships Mark III Mod. -1942 and comes with leather case. Piece measures approx. 6-1/4" x 5" and looks in good condition.

1939
Century old French made wood encased compass works and measures about 3-3/4" x 3-3/4" over case. Wooden case is inscribed 'D.E.Dwyer Jr. June 1919'. Stabilizer button works and deploys when lid is closed. Wonderful piece of history.

1940
Antique compass in wooden case was made by W. & L.E. Burley of Troy N.Y. USA. Compass needle points north as it should, and all screws are intact. 3-1/2" x 3-3/4" wooden case is in good condition, if only it could tell us where it has been. Stabilizer button works and deploys when lid closes. Glass window with some chips noted around edges. Brass lock on front works. Unique calendar type chart reads right to left, then left to right.

1941
Antique Lewis and Clark, maritime, or surveyor's compass depending on who you ask. In good condition. Needle points north when it should, wooden case nice, stabilizer button deploys when lid closes. Measures 3-1/2" x 3-1/2" over case.

1942
Vintage Herter's No. 20 fishing fly tring vise with cast iron body was made in Waseca Minn. Measures about 5-1/4" over cast iron part. In good condition. Another in lot 1943.

1943
Vintage Herter's No. 20 fishing fly tring vise with cast iron body was made in Waseca Minn. Measures about 5-1/4" over cast iron part, and about 8-1/4" over whole thing. In good condition. Another in lot 1942.

1944
Antique Stanley Rule & Level Co, No. 72-1/2 Warranted folding Boxwood rule with brass fittings was made in Britain Conn. USA. Plus one other also made in USA. Stanley is in good condition - brass hinges are smooth, wood is good with no cracks noted and nice graphics on the inside. Both 24" long when opened. Other hinges also work and looks to be marked PAt' sPend.

1945
Durham Duplex razor was made in USA with a patent date Nov. 7 11; another straight razor with marking 'L West' and a Bakelite or similar handle. Both are in good condition and come with a vintage Durham Duplex Razor Co. case.

1946
Will ship without matches. Vintage Boy Scouts waterproof match holder is 3" tall. Rubber seal still soft. Neat piece would be great for the camping or bug-out bag.

1947
US Military issued compass made by Waltham. Very neat piece is in good condition - needle points north when it should, clasp works, brass case with minor wear as to be expected. Get it while you can.

1948
Brass desk sundial compass with wooden case. Compass face measures approx. 2-3/4" and overall, across feet approx. 5". Piece is in very good condition and would look great displayed on your desk or shelf.

1949
Leupold & Stevens Instruments Cruiser Compass looks to be from the 1950s or 1960s and comes with original box and pamphelt. Compass is 3-1/2" diameter and in good condition. Neat piece.

1950
Vintage Western Electric Bell System Talk & Monitor lineman's service handset complete with belt clip, pin dialer and line tap leads with alligator clips. Handset measures 8-1/2" overall.

1951
Antique Upson Nut Co. No. 84 and Stanley No. 62-1/2 boxwood folding rulers with brass fittings and hinges. Each is 24" long and in good condition - hinges bend smoothly and no cracks noted in wood, decent graphics. Neat pieces of history.

1952
Vintage Taylor brand sling psychrometer for measuring humidity comes with handle; plus another thermometer that measures 12-1/2" long and measures -40 degrees to 120 degrees.

1953
Miner's head lamp by Permissable Electric Cap Lamp was issued by the Dept. of Interior Bureau of Mines and was made by Koehler Mfg. Unit is complete with light, measures 7-1/2" x 5-1/2". Matching set, Lot 1955.

1954
Russian-made Moonlight 2/58 night vision NV-100 spotting scope by Zenit with soft case. Battery compartment has some corrossion salts and one AA battery is stuck in the bore. Unit appears otherwise very nice.

1955
Miner's head lamp by Permissable Electric Cap Lamp was approved for Canada EM&R Coal Mines, numbered 61L-2 and was made by Koehler Mfg. Unit is complete with light, measures 7-1/2" x 5-1/2". Matching set, Lot 1953.

1956
ProMaster 1100 Monopod wih case. Code 6778. Extends from about 21-1/4" to 67-1/4". In good condition, and is would be nice for traveling.

3002
This is an EXTRA lot, please do not bid on this.

3003
This is an EXTRA lot, please do not bid on this.