Formerly JT Shannon Lumber Company
Previous Page Listing ID#: 1567084

Auction Location

Horn Lake, MS 38637
Auction Dates and TimesSALE IS COMPLETED
Thursday Dec 7, 2023 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  2. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  3. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  4. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  5. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  6. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  7. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  2. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  3. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  4. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  5. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  6. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  7. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  8. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  9. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  10. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  11. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  12. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  13. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  14. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  15. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  16. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
  2. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
  3. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  4. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  5. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  6. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
  7. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  2. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  3. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  4. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  5. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  6. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  7. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  8. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  9. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  10. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

 
Listing Information
Onsite and online auction

00
Information Lot
Highlight Pieces: MIC Lumber Trim, Sort, & Stack System, Sorter, Boiler, Wood Waste System, Dry Kilns, Planer System, and More!
December 7, 2023
9 am Central Time


Auction Agent: Zach Kittrell 931-224-0699

01
Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: December 6, 2023 9 AM to 5 PM or any time by appointment. Contact Allison Kittrell for appointment outside this time 931-698-7058
Location of Auction: 2200 Cole Road, Horn Lake, MS 38637

02
Loadout Information
Smalls and Pallets available for load out immediately following the auction until 4 pm. Friday and Monday Dec 8 and 11, Bright Star Staff Assistance 8-4pm. Contact Zach 931-224-0699 or Allison 931-698-7058.  

Rigging Option: Paul Avery 270-543-1919 
Uninstalled  30 days
Installed 90 days

If choosing to rig your own equipment, please provide certificate of insurance naming General Millworks, 2200 Cole Road, Horn Lake, MS 38637 as the beneficiary. Liability policy for $1 million. COI must be submitted to ak@brightstarauctions.com prior to entering the property to rig the equipment. 
 

03
Payment Information
Payment terms: 7% sales tax, 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 
 

04
3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

90
Heavy Equipment Key Set 36 Keys
Shipping available for $20

91
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

98
Ingersoll Rand Air Impact
Air powered, 1" drive, includes 1 7/8" socket

99
Lincoln 140 MP Power Mig Welder
SN: M3210817879, 110V plug in. Practically brand new, used 2 to 3 times. Can weld Mig, Tig, or Stide. Includes leads, gauges, and 2 boxes of welding rods

100
4 Strand MIC Transfer Deck
(1st of an entirety) 14' x 42', electric drive, includes support steel to first crossbeam, H78 chain, includes pallet with 5 new rolls of H78 chain

101
4 Arm MIC Tilt Hoist
(Part of an entirety) Hydraulic drive and cylinders, 6' arms, includes support steel to first crossbeam, 14' x 14' x 12'6" tall overall, includes steel frame and slide rack as marked

102
30hp MIC Hydraulic Pack
(Part of an entirety) 16" x 60" x 24" tank, includes pumps, valves, and all hydraulic lines to equipment

103
MIC Stacking Stick Conveyor
(Part of an entirety) Electric drive, 12" belt, 28" x 39', includes slide pans on both sides of belt as marked

104
MIC Stacking Stick Unscrambler
(Part of an entirety) Electric drive, 8'6" x 10' x 8'6" tall, (2) 27" steel slat strands, includes 50" x 56" x 70" tall stacking rack

105
MIC 5 Strand Transfer Deck
(Part of an entirety) 12' x 21', electric drive, roller chain, includes support steel to first crossbeam

106
MIC 6 Strand Unscrambler
(Part of an entirety) 29" steel slats (1 slat over 2 strands), 14' x 16' x 14' tall overall, electric drive, includes control stand, 6" x 54" rolls on top section, sorting pegs 30" on center, includes support steel to first crossbeam

107
MIC 5 Strand Transfer Deck
(Part of an entirety) 10'6" x 15', includes support steel to first crossbeam, electric drive, air cylinder on board loading arm, includes shared shaft with lot 111

108
MIC 5 Strand Transfer Deck
(Part of an entirety) 12' x 13', includes support steel to first crossbeam, electric drive, 6 strand 4' tipple arms, includes shaft shared with lot 109

109
MIC 5 Strand Transfer Deck
(Part of an entirety) 11'6" x 13', includes support steel to first crossbeam, electric drive, includes control panel, roller chain, 3 board stop arms with air cylinders, includes shaft shared with lot 110

110
MIC 5 Strand Transfer Deck
(Part of an entirety) 13' x 15', roller chain with pegs, electric drive, includes support steel to first crossbeam, 3' x 13' board tipple on end of deck, air cylinders on tipple

111
MIC 5 Strand Transfer Deck
(Part of an entirety) 12'6" x 13', electric drive, roller chain with pegs, includes support steel to ground

112
MIC 5 Strand Transfer Deck
(Part of an entirety) 11'6" x 13'6", electric drive, does not include shared shaft with lot 113

113
MIC 5 Strand Transfer Deck
(Part of an entirety) 12'6" x 12'6", electric drive, includes control panel, roller chain, 3 board stop arms with air cylinders

114
MIC 5 Strand Sorting Deck
(Part of an entirety) Electric drive, 12' x 12'6", hydraulic drive on rolls, roller chain with pegs, 6" x 15" rolls, does not include grade mark reader

115
Lucidyne Grade Mark Reader System
(Part of an entirety) Includes control panel by deck, stand with reader, steel bar with sensors going over deck, electrical panel included as marked, also includes label jet printer, screens, and monitors for camera system in office

116
Catwalk
(Part of an entirety) Includes all catwalk sections along lot 105-115, large support steel goes with equipment as marked

117
MIC 6 Strand Incline Transfer Deck
(Part of an entirety) 17'6" x 38', roller chain with pegs, 5 strand 40" board tipple, air cylinders on tipple, electric drive, includes support steel to first crossbeam, does not include shared shaft with lot 119

118
MIC 15hp Hydraulic Pack
(Part of an entirety) 16" x 60" x 16" tank, includes pumps, valves, and all hydraulic lines to equipment

119
MIC 8 Strand Sorting Deck
(Part of an entirety) Roller chain with pegs, infeed to trimmer, 11' x 23', includes chain feed through trimmers, include shaft on other side of trimmer shared with lot 121, electric drive on deck, hydraulic drive on rolls, 6 1/2" x 90 rolls, roller chain with pegs, includes support steel to first crossbeam

120
MIC 12 Head Drop Trim Saw
(Part of an entirety) 22" blades, air cylinders, electric drive, 7' x 24', 18" board length max, 20' waste conveyor belt, includes control panel, includes support steel to first crossbeam. In good condition

121
MIC 8 Strand Outfeed Sorting Deck
(Part of an entirety) Roller chain with pegs, hydraulic drive on rolls, electric drive on deck, includes sprockets on both ends of deck, does not include shaft on either end, 10'6" x 18", includes support steel to first crossbeam

122
6 Strand Transfer Deck
(Part of an entirety) Roller chain with pegs, 1 strand has no pegs, includes shaft shared with lot 121, includes support steel to first crossbeam, 13' x 72' long, electric drive

123
Softac Laser Beam Gauge
(Part of an entirety) SN: 3454, 120V, single phase power, includes steel frame, electrical/control panel and screen monitor

124
MIC 28 Bay Sling Board Sorter
(Part of an entirety) Electric drive, 5 strand roller chain with pegs, 20' x 130' long x 24' tall overall approximately, includes all control panels mounted on machine, includes 2 PLC control panels, 1 in office and the other on catwalk, includes support steel to ground, includes new parts, pallet of brand new chain, pallet of rubber wheels, poly strips for under chain

125
Catwalk Steps
(Part of an entirety) Includes all catwalk along lots 117-124, large support steel goes with equipment as lotted and marked

126
30hp Hydraulic Pack
(Part of an entirety) 30" x 60" x 48" tank, includes pumps, valves, and all hydraulic lines to equipment

127
30hp Hydraulic Pack
(Part of an entirety) (1) 16" x 60" x 30" tank, (1) 24" x 36" x 16" tank, cooling unit, valve station, includes pumps, all valves, and all hydraulic lines to equipment

128
3 Strand Transfer Deck
(Part of an entirety) H78 chain, electric drive, 11'6" x 11'6"

129
5 Strand Green Chain
(Part of an entirety) 81X chain, electric drive, 13' x 115", 2 electric drives, deck is split roughly in middle

130
5 Strand Incline Transfer Deck
(Part of an entirety) Electric drive, 81X chain, 12'6" x 16', includes support steel to ground, includes side board guard

131
MIC 6 Strand Unscrambler
(Part of an entirety) 28" steel slats, electric drive, hydraulic drive on rolls, 6" x 54" rolls, 14' x 14' x 9'6" tall overall, includes support steel to ground

132
5 Strand 7' Board Stacker
(Part of an entirety) 81X chain, does not include package rolls or elevator rolls, 4' power feed arm, control panel, 13'6" x 25'6", includes support steel to ground, electric drive on deck to ground, electric drive on deck, hydraulic drive and cylinders on stacking parts

133
Catwalk Section
(Part of an entirety) Includes all cat walk by lot 130-135, includes support steel not lotted otherwise

134
MIC Above Ground Elevator Roll Case
(Part of an entirety) 8 1/2" x 82" rolls, 18"-30" spacing, hydraulic drive, hydraulic cylinders for lift, includes control panel and reader, 9' x 20'

135
Package Roll Case
(Part of an entirety) 8 1/2" x 84" rolls, 30" spacing, 100" x 24'6", hydraulic drive

136
5 Strand Transfer Deck with Rolls
(Part of an entirety) 81X chain, electric drive on deck, no drive for dead rolls, 13' x 37' overall, 15'6" section of deck is pop-up with air cylinders

137
Stacker Motor Control
(Part of an entirety) Motor control center and PLC control electrical panel, includes conduit from panel to equipment

138
2 Strand Transfer Deck
(Part of an entirety) Roller chain, electric drive, 6' x 40' x 7' tall

139
Motor Control Center
(Part of an entirety) Motor control center for lots 100-approx 110, includes conduit from panel to equipment

140
Sullivan Palateck H25D4 Air Compressor
(Part of an entirety) Meter reads: 49,225 hours, 25 hp electric motor, includes air lines from compressor to tank to air dryer, 24 x 64" horizontal air tank

141
HP Refrigerated Air Dryer
(Part of an entirety) Model: SE-20A, SN: 2105056, 70 cfm, includes only blue steel air line to air filter

143
Structural Steel
(Part of an entirety) Includes all structural steel in sorter building. On elevated equipment-structural steel to the first crossbeam will go to equipment, all other support steel (not including catwalk) is included in this lot.

145
Conduit
(Part of an entirety) Includes all conduit from 440V/480V panels to equipment, does not include any panels or infeed wire to panels, does not include any 110V conduit or panels

146
Contents of Office by Sorter
(Part of an entirety) Floor fan, 3 chairs, desks, mini fridge, includes electric boxes as marked, 1st aid kit, eye wash station

146A
MIC Sorter Entirety of Lots 100-146
With 10% raise.

147
Steel Workbench
42" x 60 x 56" tall, 5" bench vise

148
Skate Rolls
2' x 10", 2 1/2" x 18" rolls, 8" spacing

149
Trim Saw Blades
(13) new in box 22" - 1" arbor, (10) used and sharpened 22" - 1" arbor, (10) used but some are sharpened 20" - 1" arbor, includes blade organizer

150
Parts for Trimmer/Sorter Line
2 cabinets of parts for lots 100-141, chain, bearings, cylinders, sprockets, etc. (1) 29" x 6' x 52", (1) 20" x 38' x 68" tall

151
Poly Strips
Large assortment of new poly strips for transfer decks

152
Lumber Cart
52" x 10"

153
Lumber Cart
27" x 52"

154
Cyclone and Stand
Includes steel frame to ground, pipe adapters, 100" x 21' infeed

155
FIFO/Eagle Lumber Dip Tank
Roll case (7" x 78" rolls, 36" spacing), 100 x 21" outfeed roll case (7" x 78" rolls, 3' spacing), 8' x 25' x 8' deep tank, spill containment trays under rolls, electric drive and air cylinders on rolls, package roll case in tank, electric drive for tank, includes all support steel to ground, include all electrical boxes as marked, includes conduit from boxes to equipment, includes chemical tanks and pump on top of catwalk, includes all catwalk and steps around dip tank.

156
Challenge Air E-50 Air Compressor
SN: AS5090092, 5 hp electric motor, includes cut off box, mounted on 80 gallon horizontal tank, includes additional 24" x 48" vertical air tanks, includes air line from compressor and tank to equipment

157
MIC 5 Strand Transfer Deck
(1st of an entirety) 81X chain, electric drive, 14'6" x 26'6", includes support steel to ground unless otherwise marked

158
MIC 5 Arm Tilt Hoist
(Part of an entirety) Hydraulic drive and cylinders, 80" arms, 14' x 14'6" x 11'6" tall overall, includes all support steel to ground, includes control panel

159
MIC Stacking Stick Belt Conveyor
(Part of an entirety) Includes both slide pans as marked, 12" belt, 2' x 30', electric drive

160
MIC Stacking Stick Unscrambler
(Part of an entirety) Electric drive, 7' x 9'6" x 8'6" tall overall, (2) strands of 21" steel slats, includes steel stacking frame, control panel

161
MIC 30hp Hydraulic Pack
(Part of an entirety) 16" x 60" x 30" tank, includes all pumps, valves, cooling unit, and all hydraulic lines and hoses to equipment

162
MIC Breakdown Line Entirety of Lots 157-161
With 10% raise.

163
5 Strand Transfer Deck
Electric drive, 81X chain, 12'6" x 24', includes welded steel bars on both ends, includes support steel to ground, control panel

164
Newman S-382 Double Surfacer
(1st of an entirety) SN: 15169, 460V (1) 40 hp electric motor, (1) 75 hp electric motor, 6" x 30" capacity, hydraulic drive, on press down rolls and feed rolls, (2) 32" spiral index cutting heads, includes electrical/control panel and all conduit from box to planer, no dust pipe included, includes support steel to ground

165
Infeed Belt Conveyor
(Part of an entirety) Hydraulic drive, 28" belt, 0"-7" sides, 3' x 31', includes support steel to ground

166
5 Strand Outfeed Deck
(Part of an entirety) H78A rooftop chain, steel slant deck for loading, 13' x 22', includes support steel to ground, electric drive, control box

167
25hp Hydraulic Pack
(Part of an entirety) 27" x 60" x 13" tank, includes pumps, valves, coding unit, and all hydraulic lines to equipment

168
Roach Belt Conveyor
(Part of an entirety) SN: 240782, Electric drive, 23" belt, 28" x 28'

169
Catwalk Around Planer
(Part of an entirety) Includes all catwalk and steps beside and around lots 163-168, does not include support steel lotted otherwise

170
Newman S-382 Planer Entirety of Lots 164-169
With 10% raise.

171
Electrical Panels
(1) 120V/480V with motor starters, (1) 120V PLC control panel, does not include any conduit

172
Conduit
Includes all conduit from the panels in lot 171 to equipment, no infeed wire to boxes included

173
Stacking Rack
(2) 42" x 42" high

174
Skate Rolls
18" x 10'

175
Doucet Conveyor
Model: BTRS-70-35-144-T6-30-228, SN: 7002-01-152, 74" x 12'6", air cylinders and 480V electric drive, 2" x 34" rolls, 3" spacing

176
Skate Rolls
20" x 9'8", 2 1/2" x 16" rolls, 6" spacing

177
5 Strand Green Chain
81X chain, control panels mounted on deck, includes catwalk section beside green chain, 15'6" x 85', electric drive

178
2000 Veco Plan Waste Grinder
SN: 524101, type: 45/12/2, 50 hp electric motor, 8" x 18" infeed capacity, no dust pipe included, includes electrical control panel, includes conduit from box to equipment

179
Re Tech Vibrating Conveyor
Electric drive, 27" x 17'6", 18" pan, 6" flared sides, includes grinder infeed section

180
Hytrol Skate Rolls
16" x 40" x 38" tall, 2" x 12 1/2" rolls, 2 1/2" spacing

181
Lumber Stacking Cart
4' x 4' x 44" tall

182
Dust Pipe
Includes all dust pipe in building, lots of adapters and fittings

183
400 Gallon Vertical Air Tank
40" x 8'6" tall, includes infeed pipe as marked

184
Aircel Refrigerant Air Dryer
Model: DHT-50, SN: H1CEVA1769, 50 scfm, max 200 psi, 115V, includes lines from tank to dryer, and from dryer to equipment

185
Picture Tally
6' x 7' x 100" tall cab, includes computer, monitor, printer, and control box in cab, includes disconnect box

186
3 Strand Transfer Deck
9' x 50', electric drive, includes catwalk and steps on sides, 81X chain

187
Lumber Paint Gun
Includes 1 partial 1 full tank of lumber end paint, spray gun with hose

188
Steel Workbench
2' x 8' x 43" tall, includes 18" x 28" shop cart

189
Steel Workbench
20" x 10' x 38" tall

190
DeWalt 14" Chop Saw
Sn: 000967, 110V plug in, includes 21" x 12' x 38" tall table

191
Office Supplies
Includes all contents of upstairs office, table, 4 chairs, desk, filing cabinets, computer monitors, cabinets, printer, first aid kit, coffee maker

192
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

192A
Lumber Cart
4' x 9' x 40" high, adjustable length

193
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

194
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

195
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

196
Lumber Cart
32" x 9', adjustable length

197
Lumber Cart
42" x 8' x 40" tall

198
Lumber Cart
44" x 8'6" x 32" tall

199
Lumber Cart
4' x 4' x 42" tall

200
Lumber Cart
4' x 4' x 42" tall

200A
Cutler Hammer Easy Start ES
Solid state reduced voltage motor starter

201
2012 Taylor TX300M Forklift
SN: SGE37884.
Meter reads: 18,993 hours.
Engine: Cummins QSB 6.7 160hp(SN: 73277827).
Fuel type: Diesel.
Load capacity: 30,000 lbs.
Stage mast: 2.
Mast height: 13'1".
Side shift: Yes.
Fork positioner: No.
ROPS: Enclosed.
Tire size: 12.0-20.
Tires: Pneumatic.

Features and Notes: Machine weight: 40800 lbs., 12" x 6' forks. Good running machine

202
2007 Taylor T360L Forklift
SN: SBG34675.
Meter reads: 3959 hours.
Engine: Reman 6 cylinder Cummins (Reman date 06/30/2020, family # 4CEXL0359AAD)
Fuel type: Diesel.
Load capacity: 33,690 lbs.
Stage mast: 2.
Mast height: 13'1".
Side shift: Yes.
Fork positioner: No.
ROPS: Enclosed cab.
Tire size: 12.0-20.
Tires: Pneumatic.

Features and Notes: Machine weight: 42900 lbs, 9" x 6' forks. Good running machine.

203
Toyota 7FGCU25 Forklift
SN: 04633.
Meter reads: 3474 hours.
Fuel type: LP.
Load capacity: 4500 lbs.
Stage mast: 3.
Mast height: 7'.
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 21x7x15, (rear) 16x5x10 1/2.
Tires: Solid.

Features and Notes: 4" x 48" forks. Good running machine

204
2010 Nissan MP1F2A25LV Forklift
SN: P1F29H3401.
Meter reads: 11,452 hours.
Engine: Nissan ANSXB02.147D.
Fuel type: LP.
Load capacity: 4,050 lbs.
Stage mast: 3.
Mast height: 86".
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 7.0-12, (rear) 6.0-9/4.0.
Tires: Solid.

Features and Notes: Machine weight: 8850 lbs, 4" x 48" forks. Good running machine

205
Mitsubishi FG25N Forklift
SN: AF17D02783.
Meter reads: Battery dead.
Engine: Nissan 6NSXB02.147C.
Fuel type: LP.
Load capacity: 4,790 lbs.
Stage mast: 3.
Mast height: 82".
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 7.0-12, (rear) 6.0-9/4.0.
Tires: Solid.

Features and Notes: Does not start, 4" x 48" forks, needs new battery.

209
New 2023 Traner TR850 Ride on Road Roller
SN: TR8502314, electric start, front wheel size 21.87" x 27.56", exciting force 20KN

210
2023 J&C Dump Trailer
VIN: 7N7J8PE2XNC002348, GVWR: 12000 lbs., pulls with 2 5/16" ball, needs new trailer jack, battery for hoist not included, 7' x 12' x 2' deep plus 4' tall wooden sides, 17' long overall, ST235/80R16 tires. Nice dump trailer.

211
2023 J&C Dump Trailer
VIN: 7N7J8PE26NC002346, GVWR: 12000 lbs., battery powered dump-works great, pulls with 2 5/16" ball, 7" x 12' x 2' deep box with partial 4' wooden sides added, ST235/80R16 tires. Nice dump trailer!

212
Titan Skid Steer Dust Bucket
Standard quick attach, 4' x 7' x 38" deep, heavy duty. In excellent condition.

213
Durabilt Landscraper
Pulls with pin through hitch, 10' wide, 2 hose hydraulic hookup, hydraulic cylinders for blade adjustment, 15' long overall, 7.60-15SL tires

215
3 Strand Transfer Deck
(1st of an entirety) H78 chain, electric drive, 12' x 24'6", includes section of catwalk steps

216
4 Strand Tip Hoist
(Part of an entirety) Electric drive, 11' x 12' x 8' tall overall, 6' arms

217
Belt Conveyor
(Part of an entirety) Includes slide pan, electric drive, 8" belt, 10" sides, 14" x 28' flat section, 20' incline section

218
4 Strand Transfer Deck
(Part of an entirety) 81X chain, 11'6" x 18' plus 3' tipple arm section, electric drive, includes 7' steel bars welded to tipple arm, includes control panel, includes catwalk along side of deck

219
5 Strand Transfer Deck
(Part of an entirety) 81X chain, no drive included, does not include shaft shared with lot 220, does include sprockets 13'6" x 22'

220
4 Strand Green Chain
(Part of an entirety) Electric drive, 81X chain, includes shaft shared with lot 219, 12'6" x 65'

221
Break Down Line Entirety of Lots 215-221
With 10% raise.

222
Delta Radial Arm Saw
Model: 40-C, SN: DB5367, 14" blade, 26" x 45" tabletop, 220/440V electric drive, 28" x 13' skate roll feed

223
Electrical Boxes and Conduit
Includes all electrical boxes in building as marked, motor starters and disconnects, includes all conduit from marked boxes to equipment, no infeed wire included

224
Stacking Rack
54" x 82" x 54" tall, includes approx. 1500 stacking sticks- 3/4" x 1 1/4" x 72" long

225
Lumber Cart
42" x 10' x 40" tall, adjustable length

226
Lumber Cart
42" x 10' x 40" tall, adjustable length

227
Lumber Cart
42" x 10' x 40" tall, adjustable length

228
Lumber Cart
42" x 10' x 40" tall, adjustable length

229
Lumber Cart
42" x 10' x 40" tall, adjustable length

230
Lumber Cart
42" x 10' x 40" tall, adjustable length

231
Lumber Cart
42" x 10' x 40" tall, adjustable length

232
Fans
(1) 36" floor fan, 3 prong plug in, (2) 24" fans mounted to wall, 110V plug in

233
2011 Vecoplun Waste Grinder
Model: RG52/100SWU, SN: 12810-010, 460V, 125 hp electric drive, includes Allen Bradley electric control panel with starter, 6' x 7' top feed, bottom eject, screen with 1" holes, includes small hydraulic pack for push cylinders

233A
Screen for Grinder
1" holes

234
Belt Conveyor
53" belt, electric drive, 8' x 22' overall, includes 90" x 16' steel safety panel

235
Dayton 30" Dust Blower
(1st of an entirety) 25 hp electric drive, 18" inlet and outlet, includes uninstalled adapters as marked, includes all pipe from blower to cyclone, approx. 100' of 18" galvanized

236
60" Dust Blower
(Part of an entirety) 30" wide, 36" inlet and outlet, includes inlet pipe from blower to wall of building, includes all outlet pipe from blower to adapter on bag house, 125 hp, 230/460V electric motor, includes motor starter and disconnect inside building

237
48" Dust Blower
(Part of an entirety) SN: 889011, Size: 3046, 28" wide, 100 hp, 230/460V electric motor, 32" inlet and outlet, includes inlet pipe from blower to wall of building, includes outlet pipe from blower to adapter on bag house, includes motor starter and disconnect inside building

238
Cyclone with Stand
(Part of an entirety) 14'8" x 15' x approx. 27' tall frame, 14'6" x 30' cyclone with fittings and adapters

239
Torit Bag House Collector
(Part of an entirety) 12' x approx. 60' tall, has airlock on bottom, includes 7 1/2 hp air compressor for air lock, includes all air line from compressor, no dust pipe included, includes all support steel for bag hours and adapters

240
42" Dust Blower
(Part of an entirety) 20" outlet, 24" inlet, 18" wide, 40 hp 460V electric motor, includes all inlet pipe from blower to where it goes into building, includes all pipe from blower to cyclone

241
36" Dust Blower and Bag House
(Part of an entirety) 16" wide, 20" inlet and outlet, electric drive, 460V, includes all pipe to and from blower, 54" x 6' x 15' tall bag house with Frome, includes all pipe and adapters, has airlock on bottom

242
Concrete Dust Bin with Cyclone and Unloader
(Part of an entirety) 30' x 75' concrete silo made from 20" thick blocks, approx. 14' x 25' cyclone on top of silo, with unloader 20' auger style unloader at bottom of silo with electric drive, includes all dust pipe to and from silo and cyclone that is not lotted otherwise

243
20hp Hydraulic Pack
(Part of an entirety) 27" x 48" x 14" tank, includes pumps, valves, and all hydraulic lines to equipment

244
Electrical Boxes
(Part of an entirety) Includes all electric panels as marked for lots 238-243, includes conduit from boxes to equipment

245
Dust Collection System Entirety of Lots 235-245
With 10% raise.

246
Self Dumping Hopper
5' x 13' x 4' deep, has fork pockets

247
Self Dumping Hopper
5' x 8' x 32" deep, has fork pockets

248
Dust Auger
Electric drive, 12" auger, 20' long, includes transfer box from silo unloader

248A
16" Fines Blower
Electric drive, 6" inlet, 5" outlet, includes all pipe to and from blower

249
Dust Auger
12" auger, electric drive, 40' long

250
Dust Auger
12" auger, has airlock for loading, 12' long, feeds into boiler

251
1996 Hurst Boiler System
(1st of an entirety) 8' x 22' x 12' tall heat exchange units, 3" x 5' x 4" air holding tank by exchange units, (1) 36" and (1) 30" blowers by boiler, Hurst control panel in office with Power Flex 400 panel, includes all contents of office, desk, chair, computer, printer, maintenance books, electrical panels, window AC unit, water softener with reserve tanks and pallet of salt, pallet jack, scissor lift cart, Quincy QT-5 compressor on 60 gallon vertical tank with Air Cel Refrigerated Air Dryer and 34" x 94" vertical air tank, includes all air lines, includes all reserve tanks and dust bins in boiler room, boiler control panels, includes all steam piping from boiler to equipment, includes steel cart with parts, (4) 30" x 4' x 8' tall cabinets with boiler parts, bolt bin organizer with lots of pipe fittings. Was last maintenance/repaired on 6/14/2023

252
Logan D4079 Power Plant
(Part of an entirety) 800 hp electric motor, 460V, does not include any steam pipe, includes Dresser-Rand electrical control panel (SN: D4079), rated at 550 hp, nice unit, 480V, 3 ph., 60 Hz, includes conduit from panel to motor control center

253
General Electric 8000 Distribution Panel
(Part of an entirety) 1200 amp, 480V, 5 sections, 20" x 101" x 92" tall, includes conduit from panel to equipment

254
Hurst Boiler Entirety of Lots 251-253
With 10% raise.

255
Hurst Boiler
Last repaired in 2015, includes everything in room with boiler, electrical and control panels, al steam pipe to equipment, power transformer, reserve tanks, feed bin, 18" blower, was used as backup boiler

256
48" Dust Blower
22" wide, 24" inlet and outlet, no drive-line shaft ready. Uninstalled sitting by Walnut steamers, includes 75 hp electric motor but it's not hooked up.

257
Walnut Steamer
Holds approx. 40,000 BF Pre-Fab package type, steam entry

258
Walnut Steamer
Holds approx. 30,000 BF Masonry Block construction, manual controls

259
2015 Hildebrand Dry Kilns
Labeled as kilns 11-14, 4 units tied together, 70,000 BF at 4/4 capacity per unit, 280,000 BF capacity total Pre-Fab construction, 12-15 year effective life remaining, wireless controls in kiln control room included, includes all control panels and contents of maintenance area behind kilns

260
American Wood Dryers Dry Kilns
Labeled kiln 9 and kiln 10, (2) units built together, 50,000 BF 4/4 capacity each, 100,000 BF capacity total, 10 year effective life remaining, includes all controls in room beside kiln

261
American Wood Dryers Dry Kilns
Labeled kilns 6, 7, 8, 3 units, built together, 50,000 BF capacity each, 150,000 BF total capacity, includes all controls for kilns 6, 7, 8 in the kiln control room

262
Hildebrand Dry Kilns
Labeled as kilns 4 and 5, 2 units, built together, 40,000 BF capacity each, 80,000 BF total capacity, includes all controls for kilns 4 and 5 in kiln control room

263
Irvington Moore Dry Kilns
Labeled as kilns 1, 2, and 3, 3 units sold together, 70,000 BF at 4/4 capacity each, 210,000 BF total capacity, Pre-Fab construction in late 80s, 10 year effective life remaining, includes all control panels and contents of small room built on back side of kilns 1-3

264
Dry Kiln Office
Include office contents of dry kiln control room 2 desks, chains, Dell computer, printer, no electrical included

265
Sullair LS12-50H Air Compressor
SN: 003-105198, 125 psig, meter reads: 42491 hours, 50 hp electric motor, includes cutoff box, includes air line from compressor to air dryer, includes 6' x 10' x 90" tall steel frame and 30" floor fan

266
2005 Quincy QSI-370 Air Compressor
SN: UN053679, meter reads: 18963 hours, 75 hp electric motor, includes electric cut out box, 54" x 7' x 5' tall skid unit, includes air line from compressor to air dryer

267
General Pneumatics TK500 Refrigerant Air Dryer
Electric drive, includes electric cut off box, includes all air line from dryer to equipment throughout yard

268
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268A
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268B
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268C
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268D
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268E
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268F
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268G
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268H
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268I
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268J
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268K
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268L
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268M
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268N
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268O
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268P
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268Q
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268R
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268S
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268T
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268U
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268V
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268W
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268X
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268Y
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268Z
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269A
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269B
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269C
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269D
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269E
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269F
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269G
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269H
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269I
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269J
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269K
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269L
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269M
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269N
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269O
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269P
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269Q
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269R
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269S
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269T
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269U
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269V
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269W
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269X
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269Y
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269Z
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270A
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270B
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270C
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270D
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270E
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270F
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270G
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270H
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270I
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270J
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270K
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270L
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270M
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270N
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270O
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

271
Information Lot
Information Lot Mill was started up in 2021. Was purchased in November 2022 with the intent to install and use. The owner went a different direction. Pictures of equipment installed and uninstalled.

271A
Meadows 3 strand log deck
(1st Lot in Entirety) - 22'x 10' 3 strand with H78 chain, hydraulic Tulsa winch drive, 3 arm stop & loader with nose skids. No hydraulic supply.

271B
Meadows chain type log turner
(Part of Entirety.) 2002, (sn: LT-09-02) includes pedals in cab and valve under the saw cab, steel support to the ground.

271C
Meadows Deluxe #3 Hydraulic Carriage
(Part of Entirety) 15', Deluxe #3 4 Head Block, (sn: 3D-0107-03) 48" capacity, 43" track center, Head Block spacing 1st to 2nd: 6 ft. 2nd to 3rd: 3 ft. 3rd to 4th: 3 ft. Includes 55' track, Digital Electronic setworks (Setworks program instructions are in sawyer's cab on clip board. Steel support to ground as marked.

271D
Meadows Hyd. Carriage Drive
(Part of Entirety) 50 hp electric motor, no motor controls, includes pump and cable drum assembly. No steel support

271E
Meadows Sawyer's cab
Part of Entirety.  6'x4', A/C and heat. Includes steps and catwalk platform around cab, steel support to the ground.

271F
Roll Case
Part of Entirety.  2' live rolls, 24"x6" in front of sawyers cab, gear motor drive.

271G
Meadows Slab Dump Conveyor
Part of Entiret.12'x24" air operated, steel supports to ground. 

271H
Meadows Deluxe #3 Entirety
Lots 271A-271G with a 10% raise to open the bid. 

271I
McDonough R. H. Band Mill
1st Lot of Entirety. 54", right hand, 7 1/4" face, 1" thickness on top wheel, (sn: 54-EC1563) air strain, hood assist, 54"x 17" slab belt, hydraulic guide.

271J
15 HP Hydraulic Pack
Part of Entirety.  No motor controls, steel base to ground as marked.

271K
75 HP Motor
Part of Entirety. 1775 RPM, 365T frame. Electric.

271L
Siemens SIKO Start 3RW34 75 hp soft start
Part of Entirety. 125 amp disconnect includes the wires to the motor.

271M
(11) Band mill Saw blades
Part of Entirety. (11) Band mill Saw blades - (9) in the sawmill, (2) in the building to left of sawmill. 348"

271N
McDonough Guild Grinder
Part of Entirety. McDonough Gild Grinder - (sn: BDM-1125).

271O
McDonough R. H. Band Mill Entirety
Lots 271I-271N tied together with a 10% raise.

271P
Slab Belt Conveyor
18'x 30', gear reduction drive, steel support to the ground.

271Q
Dust Conveyor
20' Drg Chain Conveyor includes 3' cyclone, steel support

271R
Meadows Slab Belt Conveyor
15'x 24"" with air operated includes a 26"" hold down roll.

271S
Slab Belt Conveyor
Slab Belt Conveyor - 35'x16" with gear motor drive, steel support to the ground.

271T
Meadows Blower
Meadows Blower - 24", 20 hp motor, 10" diameter infeed and outfeed includes Siemons Disconnect.

271U
Cutler Hammer Starters
Cutler Hammer Starters - 15 HP, 20 HP, 50 HP, 1/3 HP.

271V
Lumber Transfer Deck
Lumber Transfer Deck - 5 Strand, 21'x10' with roof top chain, gear reduction drive.

271W
Lumber Transfer Deck
Lumber Transfer Deck - 5 Strand 12'x 10' with roof top chain, 2' 3 strand air lift transfer, gear reduction drive.

271X
Slab Belt Conveyor
Slab Belt Conveyor - 25' x 18" waste conveyor, gear motor drive.

271Y
Catwalk and stairs
Catwalk and stairs - Around the edger to mill. Black in color.

271Z
Lumber Transfer Deck
Lumber Transfer Deck - 35'x8.5' 4 strand with 81X chain, (2) pin operated air stops, gear reduction drive. Steel support to ground.

272
Gravity roll case
Gravity roll case - 9' with 14" rolls.

272A
Vibrating Conveyor
Vibrating Conveyor - 22' long with 18" bottom, 10" flared sides, 28" top.

275
Skate Rolls
2 x 26 1/2" rolls, 5" spacing, (2) 30" x 10', (1) 30" x 4'

276
Skate Rolls
18" x 10'

277
Skate Rolls
2 1/2" x 8 1/2" rolls, 3 1/2" spacing, (3) 12" x 8' sections

278
Material Cart
18" x 9', 12" pan, 15" sides

279
Lumber Cart
44" x 8'6" x 30" high, no wheels

280
Crosby Dbl End Trim Saw
SN: 42096, size: 2-620, 80" x 26' overall, 10 hp electric motor on each head, 20" blades, both heads moveable

281
Pallet Racking
(24) 12' posts, (7) 4' x 12' uprights

282
Lumber Cart
4' x 11' x 40" high, needs miner repair

283
Lumber Cart
4' x 9' x 40" high, missing 2 wheels and 1 upright

284
Lumber Cart
3' x 9', no wheels, missing 1 upright

285
Lumber Rack
54" x 7' x 54" high

286
Lumber Rack
54" x 7' x 54" high

287
Belt Conveyor
66" belt, 7' x 51', no drive

288
Roach Belt Conveyor
SN: 386447, Electric drive, 30" belt, 2" sides, 3' x 17'

290
Hydraulic Oil Tank
275 gallon tank on stand, includes 7' x 7'6" x 10" deep spill containment box

291
Hydraulic Oil Tank
275 gallon tank on stand

292
Hydraulic Oil
(2) 55 gallon barrels, hand pump, 31" x 85" x 10" deep containment box

293
Hydraulic Oil
(2) partial 55 gallon barrels, 31" x 85" x 10" deep containment box

294
Storage Container
92" inside height and width, 8' x 20', includes steel frame under container as well

295
Shelf with Contents
18" x 3' x 8' tall shelf, includes all contents, conduit fittings, electrical parts

296
Bin Organizers with Contents
(2) 12" x 34" x 42" organizers with conduit fittings, 12" x 48" x 18" wooden shelf with electric parts

297
Shelf with Conduit Parts
14" x 60" x 48", includes all contents on and on top of shelf

298
Steel Cabinet with Contents
2' x 6' x 6' tall, greasy fluids, air line, cutting torch leads, mirror, welding wire

299
Self Dumping Hopper
1 1/2 yd., on castors, 3' x 52" x 32" deep

300
Barrel Dolly

301
Shop Cart
20" x 36" x 38" tall, 2 dust pans, 55 gallon barrel of multi-purpose absorbent

302
Steel Cabinet with Contents
2' x 6' x 6', 3 bags of absorbent, bottle of industrial cleaner

303
3 Ton Chain Hoist
Mounted to ceiling beam, includes steel mounting bracket

304
Miller Dialarc 250 AC/DC Welder
SN: KA859746, 200/230/460V, single phase, 103/90/45 amperes, includes leads and welding rods, mounted on steel frame

305
Delta Tablesaw
110V plug in, works as it should, 17" x 26" tabletop, 7" blade

306
Spool Cart
24" x 42" x 52" tall cart with spools of wire and air hose, on castors

307
Pallet of Multi-Purpose Shop Absorbent
Approx. 38 full 40 lbs. bags

308
55 Gallon Barrels
(1) barrel with anti freeze and hand pump, (1) barrel of ATF fluid, (1) barrel of AW46 hydraulic oil, (2) empty barrels, 52" x 52" x 8" deep spill containment pallet

309
Cutting Torch Set
Includes cart, tanks, gauges, leads, and torch

310
Acetylene Tank
Empty

311
Acetylene Tank
Empty

312
Acetylene Tank
Empty

313
Acetylene Tank
Empty

314
Acetylene Tank
Empty

315
Oxygen Tank
Empty

316
Oxygen Tank
Empty

317
Jet Metal Cutting Band Saw
110V plug in, includes roller stand

318
Steel Workbench
32" x 8" x 3' tall, 5" bench vise, includes all contents, bearings sprockets, gear chain, hydraulic pump, c-clamp

319
Underlayment Paper
10' wide roll, length unknown, used for flower beds, etc.

320
Wood Stove
Shop made out of (2) 55 gallon drums, includes stove-pipe, charcoal grill

321
Bin Organizers
16' x 20' x 4' tall, sliding shelves with assorted parts and hardware, includes stand of assorted threaded rods

322
Fans
(4) 30" fans, 3 on stands, 1 for wall mount

323
CM 2 Ton Chain Hoist
SN: PI-8, Series 622

324
Table with Contents
38" x 75" x 38" tall, hand tools, C-clamps, O-rings, bearings, key stock, hose repair kit

325
Steel Cabinet
2' x 6' x 6'

326
Pipe Benders
(1) up to 1" pipe, 4' handle, (1) up to 1 1/2" pipe, 54" handle

327
Daytona Floor Jack
Approx. 2 ton rating

328
Wheelbarrow and Brooms
2 brooms

329
Vevor Jack Stands
Adjustable and collapsible, 4 pieces

330
Pallet of Tools
Fuel jugs, jackstands, battery charger, hole saw set, Milwaukee hammer drill, 7" angle grinder

331
Pallet of Belt Lacing
Flexco lacing, alligator lacing tool, (2) roller lacer tools

332
New Chain
9 boxes of 81XR chain, 10' per box

333
New Chain
3 boxes of Ansi 140 RIV Lynx HD chain, 10' per box

334
New Chain
4 boxes of 100R chain, 10' per box

335
New Chain
1 box of 80R chain, 1 box of 803RX, 1 box of 50-1RV, 10' per box

336
Hose Reels
1 reel with air hose, 1 reel with extension cord

337
Desk Supplies
Office Desk and chair and contents, hard hat, 1st aid kit

338
Miller CP-300 Wire Welder
SN: JH172444, 200/230/460V, 3 phase, Miller R-115 Wire Feeder, includes leads, gun, and tanks, mounted on cart with castors

339
Steel Saw Horses
4' x 20" tall

340
Shelf with All Contents
2' x 4' x 78" tall shelf, bearings, planer wheels, lumber cart wheels, torch gauges, hand tools

341
Steel Table with All Contents
3' x 54" x 3" tall, 5" Columbian Bench vise, assorted chain parts

342
Hose Reel
Includes air hose

343
Lincoln Idealarc 250 Welder
Model: Tig 250, SN: AC-528233, 208/230/460V, includes mask and leads, mounted on cart with castors

344
Dry Rod II Electrode Oven
120/230V

345
Planer Wheels
All new wheels, 30 pieces, fit lot 164

346
Planer Parts
Lots of new parts, gearboxes, bearings, housings, chain. Fits lot 164.

347
Pallet of Parts
25 hp, 284T frame, 460V, 1760 rpm, electric motor, assorted pipe fittings, metal cut off saw, metal clamps

348
Steel Table
4' x 82" x 40" tall, on castors, 5" bench vise, pipe clamps, dust pipe fittings

349
Westward 20 Ton Shop Press
Model: 1MZJ6

350
Nesco 8" Bench Grinder
110V plug in, mounted to steel frame with fork pockets

351
Powermatic 1150A Drill Press
SN: 95158108, 110V plug in

352
Shelf with Contents
18" x 3' x 7' tall, lots of welding supplies

353
Steel Cabinet
2' x 5' x 7' tall, chain, welding wire

354
Shelf with Parts
20" x 5' x 4' tall, (3) brand new WEG 3 hp motors, air line parts, gearbox

355
Bolt Bin Organizers
(1) 16" x 20" x 5', (1) 12" x 34" x 30", includes all contents

356
Bolt Bin Organizers
16' x 28' x 7' wooden shelf, battery charger, includes all contents

357
Bolt Bin Organizers
12" x 34" x 65" tall, includes all contents

358
Bolt Bin Organizers
12" x 34" x 65" tall, includes all contents

359
Bolt Bin Organizers
12" x 34" x 65" tall, includes all contents

360
Bolt Bin Organizers
12" x 34" x 70" tall, includes all contents

361
2005 Quincy QSI-370 Air Compressor
SN: UN053678, meter reads: 27,542 hours, uninstalled 75 hp electric motor

362
10" Fan Blower
10" inlet, 7 1/2" x 10" outlet, electric drive

363
Pallet of Electric Panels
(3) control panels

364
Pallet of Aluminum Jig Parts

365
Pallet of Electric Boxes
Panels, conduit boxes, cutoffs, starters

366
Pallet of Misc.
GreCon Control panel, 30" fan

367
Hoffman Electrical Control Station

368
DeWalt Radial Arm Saw
Model: 3251, SN: 62170117, electric drive, 12" blade, 3' x 4' x 6' tall

369
Pallet of Electrical Boxes

370
2006 Holtec Pack Saw
Model: Transcut II, SN: 05334, no bar, electric drive

371
NYB 18" Dust Blower
16" inlet, 12" x 18" outlet, electric drive

372
Pallet of Electrical Panels
Also includes roller and steel clips

373
Water Pump Unit
Electric drive, 28" x 28" x 44" tall

374
Hevi-Duty Transformer
3 phase, 120CT/240D to 480D

375
Pallet of Electrical Parts
Breakers and switches

376
Electric Motor on Stand
7.5 hp, 1745 rpm, 230/460V

377
Pallet of Misc.
Belts, first aid kit, grease gun

378
GE Transformer
3 phase, 480V-575V, cut off boxes

379
Pallet of Electrical Boxes

380
Pallet of Electrical Boxes

381
Jesco 1/2 Yard Self Dumping Hopper
2000 lbs. capacity

382
1 Yard Self Dumping Hopper
On castors

383
Jesco 1/2 Yard Self Dumping Hopper
2000 lbs. capacity

384
Saw Blades
10-20" blades, used, some sharpened

385
Pallet of Bearings, Sprockets, and Parts

386
Pallet of Assorted Lights

387
Pallet of Assorted Lights

388
Pallet of Parts
Planer wheels, feed chain parts

389
Pallet of Electrical Parts

390
Pallet of Parts
Sprockets, water pump, electric components, chain, saw blades, control panel

391
Pallet of Electrical Parts

392
Pallet of Electrical Parts

393
Pallet of Electrical Parts

394
Pallet of Misc.
Belts, fuses, water heater, chain pulleys, 9'6" extension ladder

395
Pallet of Misc.
Fittings, valves, blades, poly blocks

396
Pallet of Electric Motors
8 new motors (1-3 KW), assorted deck chain

397
Pallet of Poly Strips

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Jan 1
Des Arc, AR


Oct 1
Middlebury, IN



Sponsored Links

Formerly JT Shannon Lumber Company

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
2200 Cole Road
Horn Lake, MS 38637
Sale Dates and Times
Thursday Dec 7, 2023 Completed
Sale Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  2. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  3. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  4. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  5. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  6. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  7. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  2. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  3. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  4. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  5. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  6. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  7. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  8. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  9. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  10. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  11. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  12. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  13. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  14. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  15. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  16. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
  2. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
  3. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  4. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  5. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  6. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
  7. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  2. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  3. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  4. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  5. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  6. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  7. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  8. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  9. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  10. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

 
Listing Details
Onsite and online auction

00
Information Lot
Highlight Pieces: MIC Lumber Trim, Sort, & Stack System, Sorter, Boiler, Wood Waste System, Dry Kilns, Planer System, and More!
December 7, 2023
9 am Central Time


Auction Agent: Zach Kittrell 931-224-0699

01
Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: December 6, 2023 9 AM to 5 PM or any time by appointment. Contact Allison Kittrell for appointment outside this time 931-698-7058
Location of Auction: 2200 Cole Road, Horn Lake, MS 38637

02
Loadout Information
Smalls and Pallets available for load out immediately following the auction until 4 pm. Friday and Monday Dec 8 and 11, Bright Star Staff Assistance 8-4pm. Contact Zach 931-224-0699 or Allison 931-698-7058.  

Rigging Option: Paul Avery 270-543-1919 
Uninstalled  30 days
Installed 90 days

If choosing to rig your own equipment, please provide certificate of insurance naming General Millworks, 2200 Cole Road, Horn Lake, MS 38637 as the beneficiary. Liability policy for $1 million. COI must be submitted to ak@brightstarauctions.com prior to entering the property to rig the equipment. 
 

03
Payment Information
Payment terms: 7% sales tax, 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 
 

04
3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

90
Heavy Equipment Key Set 36 Keys
Shipping available for $20

91
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

98
Ingersoll Rand Air Impact
Air powered, 1" drive, includes 1 7/8" socket

99
Lincoln 140 MP Power Mig Welder
SN: M3210817879, 110V plug in. Practically brand new, used 2 to 3 times. Can weld Mig, Tig, or Stide. Includes leads, gauges, and 2 boxes of welding rods

100
4 Strand MIC Transfer Deck
(1st of an entirety) 14' x 42', electric drive, includes support steel to first crossbeam, H78 chain, includes pallet with 5 new rolls of H78 chain

101
4 Arm MIC Tilt Hoist
(Part of an entirety) Hydraulic drive and cylinders, 6' arms, includes support steel to first crossbeam, 14' x 14' x 12'6" tall overall, includes steel frame and slide rack as marked

102
30hp MIC Hydraulic Pack
(Part of an entirety) 16" x 60" x 24" tank, includes pumps, valves, and all hydraulic lines to equipment

103
MIC Stacking Stick Conveyor
(Part of an entirety) Electric drive, 12" belt, 28" x 39', includes slide pans on both sides of belt as marked

104
MIC Stacking Stick Unscrambler
(Part of an entirety) Electric drive, 8'6" x 10' x 8'6" tall, (2) 27" steel slat strands, includes 50" x 56" x 70" tall stacking rack

105
MIC 5 Strand Transfer Deck
(Part of an entirety) 12' x 21', electric drive, roller chain, includes support steel to first crossbeam

106
MIC 6 Strand Unscrambler
(Part of an entirety) 29" steel slats (1 slat over 2 strands), 14' x 16' x 14' tall overall, electric drive, includes control stand, 6" x 54" rolls on top section, sorting pegs 30" on center, includes support steel to first crossbeam

107
MIC 5 Strand Transfer Deck
(Part of an entirety) 10'6" x 15', includes support steel to first crossbeam, electric drive, air cylinder on board loading arm, includes shared shaft with lot 111

108
MIC 5 Strand Transfer Deck
(Part of an entirety) 12' x 13', includes support steel to first crossbeam, electric drive, 6 strand 4' tipple arms, includes shaft shared with lot 109

109
MIC 5 Strand Transfer Deck
(Part of an entirety) 11'6" x 13', includes support steel to first crossbeam, electric drive, includes control panel, roller chain, 3 board stop arms with air cylinders, includes shaft shared with lot 110

110
MIC 5 Strand Transfer Deck
(Part of an entirety) 13' x 15', roller chain with pegs, electric drive, includes support steel to first crossbeam, 3' x 13' board tipple on end of deck, air cylinders on tipple

111
MIC 5 Strand Transfer Deck
(Part of an entirety) 12'6" x 13', electric drive, roller chain with pegs, includes support steel to ground

112
MIC 5 Strand Transfer Deck
(Part of an entirety) 11'6" x 13'6", electric drive, does not include shared shaft with lot 113

113
MIC 5 Strand Transfer Deck
(Part of an entirety) 12'6" x 12'6", electric drive, includes control panel, roller chain, 3 board stop arms with air cylinders

114
MIC 5 Strand Sorting Deck
(Part of an entirety) Electric drive, 12' x 12'6", hydraulic drive on rolls, roller chain with pegs, 6" x 15" rolls, does not include grade mark reader

115
Lucidyne Grade Mark Reader System
(Part of an entirety) Includes control panel by deck, stand with reader, steel bar with sensors going over deck, electrical panel included as marked, also includes label jet printer, screens, and monitors for camera system in office

116
Catwalk
(Part of an entirety) Includes all catwalk sections along lot 105-115, large support steel goes with equipment as marked

117
MIC 6 Strand Incline Transfer Deck
(Part of an entirety) 17'6" x 38', roller chain with pegs, 5 strand 40" board tipple, air cylinders on tipple, electric drive, includes support steel to first crossbeam, does not include shared shaft with lot 119

118
MIC 15hp Hydraulic Pack
(Part of an entirety) 16" x 60" x 16" tank, includes pumps, valves, and all hydraulic lines to equipment

119
MIC 8 Strand Sorting Deck
(Part of an entirety) Roller chain with pegs, infeed to trimmer, 11' x 23', includes chain feed through trimmers, include shaft on other side of trimmer shared with lot 121, electric drive on deck, hydraulic drive on rolls, 6 1/2" x 90 rolls, roller chain with pegs, includes support steel to first crossbeam

120
MIC 12 Head Drop Trim Saw
(Part of an entirety) 22" blades, air cylinders, electric drive, 7' x 24', 18" board length max, 20' waste conveyor belt, includes control panel, includes support steel to first crossbeam. In good condition

121
MIC 8 Strand Outfeed Sorting Deck
(Part of an entirety) Roller chain with pegs, hydraulic drive on rolls, electric drive on deck, includes sprockets on both ends of deck, does not include shaft on either end, 10'6" x 18", includes support steel to first crossbeam

122
6 Strand Transfer Deck
(Part of an entirety) Roller chain with pegs, 1 strand has no pegs, includes shaft shared with lot 121, includes support steel to first crossbeam, 13' x 72' long, electric drive

123
Softac Laser Beam Gauge
(Part of an entirety) SN: 3454, 120V, single phase power, includes steel frame, electrical/control panel and screen monitor

124
MIC 28 Bay Sling Board Sorter
(Part of an entirety) Electric drive, 5 strand roller chain with pegs, 20' x 130' long x 24' tall overall approximately, includes all control panels mounted on machine, includes 2 PLC control panels, 1 in office and the other on catwalk, includes support steel to ground, includes new parts, pallet of brand new chain, pallet of rubber wheels, poly strips for under chain

125
Catwalk Steps
(Part of an entirety) Includes all catwalk along lots 117-124, large support steel goes with equipment as lotted and marked

126
30hp Hydraulic Pack
(Part of an entirety) 30" x 60" x 48" tank, includes pumps, valves, and all hydraulic lines to equipment

127
30hp Hydraulic Pack
(Part of an entirety) (1) 16" x 60" x 30" tank, (1) 24" x 36" x 16" tank, cooling unit, valve station, includes pumps, all valves, and all hydraulic lines to equipment

128
3 Strand Transfer Deck
(Part of an entirety) H78 chain, electric drive, 11'6" x 11'6"

129
5 Strand Green Chain
(Part of an entirety) 81X chain, electric drive, 13' x 115", 2 electric drives, deck is split roughly in middle

130
5 Strand Incline Transfer Deck
(Part of an entirety) Electric drive, 81X chain, 12'6" x 16', includes support steel to ground, includes side board guard

131
MIC 6 Strand Unscrambler
(Part of an entirety) 28" steel slats, electric drive, hydraulic drive on rolls, 6" x 54" rolls, 14' x 14' x 9'6" tall overall, includes support steel to ground

132
5 Strand 7' Board Stacker
(Part of an entirety) 81X chain, does not include package rolls or elevator rolls, 4' power feed arm, control panel, 13'6" x 25'6", includes support steel to ground, electric drive on deck to ground, electric drive on deck, hydraulic drive and cylinders on stacking parts

133
Catwalk Section
(Part of an entirety) Includes all cat walk by lot 130-135, includes support steel not lotted otherwise

134
MIC Above Ground Elevator Roll Case
(Part of an entirety) 8 1/2" x 82" rolls, 18"-30" spacing, hydraulic drive, hydraulic cylinders for lift, includes control panel and reader, 9' x 20'

135
Package Roll Case
(Part of an entirety) 8 1/2" x 84" rolls, 30" spacing, 100" x 24'6", hydraulic drive

136
5 Strand Transfer Deck with Rolls
(Part of an entirety) 81X chain, electric drive on deck, no drive for dead rolls, 13' x 37' overall, 15'6" section of deck is pop-up with air cylinders

137
Stacker Motor Control
(Part of an entirety) Motor control center and PLC control electrical panel, includes conduit from panel to equipment

138
2 Strand Transfer Deck
(Part of an entirety) Roller chain, electric drive, 6' x 40' x 7' tall

139
Motor Control Center
(Part of an entirety) Motor control center for lots 100-approx 110, includes conduit from panel to equipment

140
Sullivan Palateck H25D4 Air Compressor
(Part of an entirety) Meter reads: 49,225 hours, 25 hp electric motor, includes air lines from compressor to tank to air dryer, 24 x 64" horizontal air tank

141
HP Refrigerated Air Dryer
(Part of an entirety) Model: SE-20A, SN: 2105056, 70 cfm, includes only blue steel air line to air filter

143
Structural Steel
(Part of an entirety) Includes all structural steel in sorter building. On elevated equipment-structural steel to the first crossbeam will go to equipment, all other support steel (not including catwalk) is included in this lot.

145
Conduit
(Part of an entirety) Includes all conduit from 440V/480V panels to equipment, does not include any panels or infeed wire to panels, does not include any 110V conduit or panels

146
Contents of Office by Sorter
(Part of an entirety) Floor fan, 3 chairs, desks, mini fridge, includes electric boxes as marked, 1st aid kit, eye wash station

146A
MIC Sorter Entirety of Lots 100-146
With 10% raise.

147
Steel Workbench
42" x 60 x 56" tall, 5" bench vise

148
Skate Rolls
2' x 10", 2 1/2" x 18" rolls, 8" spacing

149
Trim Saw Blades
(13) new in box 22" - 1" arbor, (10) used and sharpened 22" - 1" arbor, (10) used but some are sharpened 20" - 1" arbor, includes blade organizer

150
Parts for Trimmer/Sorter Line
2 cabinets of parts for lots 100-141, chain, bearings, cylinders, sprockets, etc. (1) 29" x 6' x 52", (1) 20" x 38' x 68" tall

151
Poly Strips
Large assortment of new poly strips for transfer decks

152
Lumber Cart
52" x 10"

153
Lumber Cart
27" x 52"

154
Cyclone and Stand
Includes steel frame to ground, pipe adapters, 100" x 21' infeed

155
FIFO/Eagle Lumber Dip Tank
Roll case (7" x 78" rolls, 36" spacing), 100 x 21" outfeed roll case (7" x 78" rolls, 3' spacing), 8' x 25' x 8' deep tank, spill containment trays under rolls, electric drive and air cylinders on rolls, package roll case in tank, electric drive for tank, includes all support steel to ground, include all electrical boxes as marked, includes conduit from boxes to equipment, includes chemical tanks and pump on top of catwalk, includes all catwalk and steps around dip tank.

156
Challenge Air E-50 Air Compressor
SN: AS5090092, 5 hp electric motor, includes cut off box, mounted on 80 gallon horizontal tank, includes additional 24" x 48" vertical air tanks, includes air line from compressor and tank to equipment

157
MIC 5 Strand Transfer Deck
(1st of an entirety) 81X chain, electric drive, 14'6" x 26'6", includes support steel to ground unless otherwise marked

158
MIC 5 Arm Tilt Hoist
(Part of an entirety) Hydraulic drive and cylinders, 80" arms, 14' x 14'6" x 11'6" tall overall, includes all support steel to ground, includes control panel

159
MIC Stacking Stick Belt Conveyor
(Part of an entirety) Includes both slide pans as marked, 12" belt, 2' x 30', electric drive

160
MIC Stacking Stick Unscrambler
(Part of an entirety) Electric drive, 7' x 9'6" x 8'6" tall overall, (2) strands of 21" steel slats, includes steel stacking frame, control panel

161
MIC 30hp Hydraulic Pack
(Part of an entirety) 16" x 60" x 30" tank, includes all pumps, valves, cooling unit, and all hydraulic lines and hoses to equipment

162
MIC Breakdown Line Entirety of Lots 157-161
With 10% raise.

163
5 Strand Transfer Deck
Electric drive, 81X chain, 12'6" x 24', includes welded steel bars on both ends, includes support steel to ground, control panel

164
Newman S-382 Double Surfacer
(1st of an entirety) SN: 15169, 460V (1) 40 hp electric motor, (1) 75 hp electric motor, 6" x 30" capacity, hydraulic drive, on press down rolls and feed rolls, (2) 32" spiral index cutting heads, includes electrical/control panel and all conduit from box to planer, no dust pipe included, includes support steel to ground

165
Infeed Belt Conveyor
(Part of an entirety) Hydraulic drive, 28" belt, 0"-7" sides, 3' x 31', includes support steel to ground

166
5 Strand Outfeed Deck
(Part of an entirety) H78A rooftop chain, steel slant deck for loading, 13' x 22', includes support steel to ground, electric drive, control box

167
25hp Hydraulic Pack
(Part of an entirety) 27" x 60" x 13" tank, includes pumps, valves, coding unit, and all hydraulic lines to equipment

168
Roach Belt Conveyor
(Part of an entirety) SN: 240782, Electric drive, 23" belt, 28" x 28'

169
Catwalk Around Planer
(Part of an entirety) Includes all catwalk and steps beside and around lots 163-168, does not include support steel lotted otherwise

170
Newman S-382 Planer Entirety of Lots 164-169
With 10% raise.

171
Electrical Panels
(1) 120V/480V with motor starters, (1) 120V PLC control panel, does not include any conduit

172
Conduit
Includes all conduit from the panels in lot 171 to equipment, no infeed wire to boxes included

173
Stacking Rack
(2) 42" x 42" high

174
Skate Rolls
18" x 10'

175
Doucet Conveyor
Model: BTRS-70-35-144-T6-30-228, SN: 7002-01-152, 74" x 12'6", air cylinders and 480V electric drive, 2" x 34" rolls, 3" spacing

176
Skate Rolls
20" x 9'8", 2 1/2" x 16" rolls, 6" spacing

177
5 Strand Green Chain
81X chain, control panels mounted on deck, includes catwalk section beside green chain, 15'6" x 85', electric drive

178
2000 Veco Plan Waste Grinder
SN: 524101, type: 45/12/2, 50 hp electric motor, 8" x 18" infeed capacity, no dust pipe included, includes electrical control panel, includes conduit from box to equipment

179
Re Tech Vibrating Conveyor
Electric drive, 27" x 17'6", 18" pan, 6" flared sides, includes grinder infeed section

180
Hytrol Skate Rolls
16" x 40" x 38" tall, 2" x 12 1/2" rolls, 2 1/2" spacing

181
Lumber Stacking Cart
4' x 4' x 44" tall

182
Dust Pipe
Includes all dust pipe in building, lots of adapters and fittings

183
400 Gallon Vertical Air Tank
40" x 8'6" tall, includes infeed pipe as marked

184
Aircel Refrigerant Air Dryer
Model: DHT-50, SN: H1CEVA1769, 50 scfm, max 200 psi, 115V, includes lines from tank to dryer, and from dryer to equipment

185
Picture Tally
6' x 7' x 100" tall cab, includes computer, monitor, printer, and control box in cab, includes disconnect box

186
3 Strand Transfer Deck
9' x 50', electric drive, includes catwalk and steps on sides, 81X chain

187
Lumber Paint Gun
Includes 1 partial 1 full tank of lumber end paint, spray gun with hose

188
Steel Workbench
2' x 8' x 43" tall, includes 18" x 28" shop cart

189
Steel Workbench
20" x 10' x 38" tall

190
DeWalt 14" Chop Saw
Sn: 000967, 110V plug in, includes 21" x 12' x 38" tall table

191
Office Supplies
Includes all contents of upstairs office, table, 4 chairs, desk, filing cabinets, computer monitors, cabinets, printer, first aid kit, coffee maker

192
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

192A
Lumber Cart
4' x 9' x 40" high, adjustable length

193
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

194
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

195
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

196
Lumber Cart
32" x 9', adjustable length

197
Lumber Cart
42" x 8' x 40" tall

198
Lumber Cart
44" x 8'6" x 32" tall

199
Lumber Cart
4' x 4' x 42" tall

200
Lumber Cart
4' x 4' x 42" tall

200A
Cutler Hammer Easy Start ES
Solid state reduced voltage motor starter

201
2012 Taylor TX300M Forklift
SN: SGE37884.
Meter reads: 18,993 hours.
Engine: Cummins QSB 6.7 160hp(SN: 73277827).
Fuel type: Diesel.
Load capacity: 30,000 lbs.
Stage mast: 2.
Mast height: 13'1".
Side shift: Yes.
Fork positioner: No.
ROPS: Enclosed.
Tire size: 12.0-20.
Tires: Pneumatic.

Features and Notes: Machine weight: 40800 lbs., 12" x 6' forks. Good running machine

202
2007 Taylor T360L Forklift
SN: SBG34675.
Meter reads: 3959 hours.
Engine: Reman 6 cylinder Cummins (Reman date 06/30/2020, family # 4CEXL0359AAD)
Fuel type: Diesel.
Load capacity: 33,690 lbs.
Stage mast: 2.
Mast height: 13'1".
Side shift: Yes.
Fork positioner: No.
ROPS: Enclosed cab.
Tire size: 12.0-20.
Tires: Pneumatic.

Features and Notes: Machine weight: 42900 lbs, 9" x 6' forks. Good running machine.

203
Toyota 7FGCU25 Forklift
SN: 04633.
Meter reads: 3474 hours.
Fuel type: LP.
Load capacity: 4500 lbs.
Stage mast: 3.
Mast height: 7'.
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 21x7x15, (rear) 16x5x10 1/2.
Tires: Solid.

Features and Notes: 4" x 48" forks. Good running machine

204
2010 Nissan MP1F2A25LV Forklift
SN: P1F29H3401.
Meter reads: 11,452 hours.
Engine: Nissan ANSXB02.147D.
Fuel type: LP.
Load capacity: 4,050 lbs.
Stage mast: 3.
Mast height: 86".
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 7.0-12, (rear) 6.0-9/4.0.
Tires: Solid.

Features and Notes: Machine weight: 8850 lbs, 4" x 48" forks. Good running machine

205
Mitsubishi FG25N Forklift
SN: AF17D02783.
Meter reads: Battery dead.
Engine: Nissan 6NSXB02.147C.
Fuel type: LP.
Load capacity: 4,790 lbs.
Stage mast: 3.
Mast height: 82".
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 7.0-12, (rear) 6.0-9/4.0.
Tires: Solid.

Features and Notes: Does not start, 4" x 48" forks, needs new battery.

209
New 2023 Traner TR850 Ride on Road Roller
SN: TR8502314, electric start, front wheel size 21.87" x 27.56", exciting force 20KN

210
2023 J&C Dump Trailer
VIN: 7N7J8PE2XNC002348, GVWR: 12000 lbs., pulls with 2 5/16" ball, needs new trailer jack, battery for hoist not included, 7' x 12' x 2' deep plus 4' tall wooden sides, 17' long overall, ST235/80R16 tires. Nice dump trailer.

211
2023 J&C Dump Trailer
VIN: 7N7J8PE26NC002346, GVWR: 12000 lbs., battery powered dump-works great, pulls with 2 5/16" ball, 7" x 12' x 2' deep box with partial 4' wooden sides added, ST235/80R16 tires. Nice dump trailer!

212
Titan Skid Steer Dust Bucket
Standard quick attach, 4' x 7' x 38" deep, heavy duty. In excellent condition.

213
Durabilt Landscraper
Pulls with pin through hitch, 10' wide, 2 hose hydraulic hookup, hydraulic cylinders for blade adjustment, 15' long overall, 7.60-15SL tires

215
3 Strand Transfer Deck
(1st of an entirety) H78 chain, electric drive, 12' x 24'6", includes section of catwalk steps

216
4 Strand Tip Hoist
(Part of an entirety) Electric drive, 11' x 12' x 8' tall overall, 6' arms

217
Belt Conveyor
(Part of an entirety) Includes slide pan, electric drive, 8" belt, 10" sides, 14" x 28' flat section, 20' incline section

218
4 Strand Transfer Deck
(Part of an entirety) 81X chain, 11'6" x 18' plus 3' tipple arm section, electric drive, includes 7' steel bars welded to tipple arm, includes control panel, includes catwalk along side of deck

219
5 Strand Transfer Deck
(Part of an entirety) 81X chain, no drive included, does not include shaft shared with lot 220, does include sprockets 13'6" x 22'

220
4 Strand Green Chain
(Part of an entirety) Electric drive, 81X chain, includes shaft shared with lot 219, 12'6" x 65'

221
Break Down Line Entirety of Lots 215-221
With 10% raise.

222
Delta Radial Arm Saw
Model: 40-C, SN: DB5367, 14" blade, 26" x 45" tabletop, 220/440V electric drive, 28" x 13' skate roll feed

223
Electrical Boxes and Conduit
Includes all electrical boxes in building as marked, motor starters and disconnects, includes all conduit from marked boxes to equipment, no infeed wire included

224
Stacking Rack
54" x 82" x 54" tall, includes approx. 1500 stacking sticks- 3/4" x 1 1/4" x 72" long

225
Lumber Cart
42" x 10' x 40" tall, adjustable length

226
Lumber Cart
42" x 10' x 40" tall, adjustable length

227
Lumber Cart
42" x 10' x 40" tall, adjustable length

228
Lumber Cart
42" x 10' x 40" tall, adjustable length

229
Lumber Cart
42" x 10' x 40" tall, adjustable length

230
Lumber Cart
42" x 10' x 40" tall, adjustable length

231
Lumber Cart
42" x 10' x 40" tall, adjustable length

232
Fans
(1) 36" floor fan, 3 prong plug in, (2) 24" fans mounted to wall, 110V plug in

233
2011 Vecoplun Waste Grinder
Model: RG52/100SWU, SN: 12810-010, 460V, 125 hp electric drive, includes Allen Bradley electric control panel with starter, 6' x 7' top feed, bottom eject, screen with 1" holes, includes small hydraulic pack for push cylinders

233A
Screen for Grinder
1" holes

234
Belt Conveyor
53" belt, electric drive, 8' x 22' overall, includes 90" x 16' steel safety panel

235
Dayton 30" Dust Blower
(1st of an entirety) 25 hp electric drive, 18" inlet and outlet, includes uninstalled adapters as marked, includes all pipe from blower to cyclone, approx. 100' of 18" galvanized

236
60" Dust Blower
(Part of an entirety) 30" wide, 36" inlet and outlet, includes inlet pipe from blower to wall of building, includes all outlet pipe from blower to adapter on bag house, 125 hp, 230/460V electric motor, includes motor starter and disconnect inside building

237
48" Dust Blower
(Part of an entirety) SN: 889011, Size: 3046, 28" wide, 100 hp, 230/460V electric motor, 32" inlet and outlet, includes inlet pipe from blower to wall of building, includes outlet pipe from blower to adapter on bag house, includes motor starter and disconnect inside building

238
Cyclone with Stand
(Part of an entirety) 14'8" x 15' x approx. 27' tall frame, 14'6" x 30' cyclone with fittings and adapters

239
Torit Bag House Collector
(Part of an entirety) 12' x approx. 60' tall, has airlock on bottom, includes 7 1/2 hp air compressor for air lock, includes all air line from compressor, no dust pipe included, includes all support steel for bag hours and adapters

240
42" Dust Blower
(Part of an entirety) 20" outlet, 24" inlet, 18" wide, 40 hp 460V electric motor, includes all inlet pipe from blower to where it goes into building, includes all pipe from blower to cyclone

241
36" Dust Blower and Bag House
(Part of an entirety) 16" wide, 20" inlet and outlet, electric drive, 460V, includes all pipe to and from blower, 54" x 6' x 15' tall bag house with Frome, includes all pipe and adapters, has airlock on bottom

242
Concrete Dust Bin with Cyclone and Unloader
(Part of an entirety) 30' x 75' concrete silo made from 20" thick blocks, approx. 14' x 25' cyclone on top of silo, with unloader 20' auger style unloader at bottom of silo with electric drive, includes all dust pipe to and from silo and cyclone that is not lotted otherwise

243
20hp Hydraulic Pack
(Part of an entirety) 27" x 48" x 14" tank, includes pumps, valves, and all hydraulic lines to equipment

244
Electrical Boxes
(Part of an entirety) Includes all electric panels as marked for lots 238-243, includes conduit from boxes to equipment

245
Dust Collection System Entirety of Lots 235-245
With 10% raise.

246
Self Dumping Hopper
5' x 13' x 4' deep, has fork pockets

247
Self Dumping Hopper
5' x 8' x 32" deep, has fork pockets

248
Dust Auger
Electric drive, 12" auger, 20' long, includes transfer box from silo unloader

248A
16" Fines Blower
Electric drive, 6" inlet, 5" outlet, includes all pipe to and from blower

249
Dust Auger
12" auger, electric drive, 40' long

250
Dust Auger
12" auger, has airlock for loading, 12' long, feeds into boiler

251
1996 Hurst Boiler System
(1st of an entirety) 8' x 22' x 12' tall heat exchange units, 3" x 5' x 4" air holding tank by exchange units, (1) 36" and (1) 30" blowers by boiler, Hurst control panel in office with Power Flex 400 panel, includes all contents of office, desk, chair, computer, printer, maintenance books, electrical panels, window AC unit, water softener with reserve tanks and pallet of salt, pallet jack, scissor lift cart, Quincy QT-5 compressor on 60 gallon vertical tank with Air Cel Refrigerated Air Dryer and 34" x 94" vertical air tank, includes all air lines, includes all reserve tanks and dust bins in boiler room, boiler control panels, includes all steam piping from boiler to equipment, includes steel cart with parts, (4) 30" x 4' x 8' tall cabinets with boiler parts, bolt bin organizer with lots of pipe fittings. Was last maintenance/repaired on 6/14/2023

252
Logan D4079 Power Plant
(Part of an entirety) 800 hp electric motor, 460V, does not include any steam pipe, includes Dresser-Rand electrical control panel (SN: D4079), rated at 550 hp, nice unit, 480V, 3 ph., 60 Hz, includes conduit from panel to motor control center

253
General Electric 8000 Distribution Panel
(Part of an entirety) 1200 amp, 480V, 5 sections, 20" x 101" x 92" tall, includes conduit from panel to equipment

254
Hurst Boiler Entirety of Lots 251-253
With 10% raise.

255
Hurst Boiler
Last repaired in 2015, includes everything in room with boiler, electrical and control panels, al steam pipe to equipment, power transformer, reserve tanks, feed bin, 18" blower, was used as backup boiler

256
48" Dust Blower
22" wide, 24" inlet and outlet, no drive-line shaft ready. Uninstalled sitting by Walnut steamers, includes 75 hp electric motor but it's not hooked up.

257
Walnut Steamer
Holds approx. 40,000 BF Pre-Fab package type, steam entry

258
Walnut Steamer
Holds approx. 30,000 BF Masonry Block construction, manual controls

259
2015 Hildebrand Dry Kilns
Labeled as kilns 11-14, 4 units tied together, 70,000 BF at 4/4 capacity per unit, 280,000 BF capacity total Pre-Fab construction, 12-15 year effective life remaining, wireless controls in kiln control room included, includes all control panels and contents of maintenance area behind kilns

260
American Wood Dryers Dry Kilns
Labeled kiln 9 and kiln 10, (2) units built together, 50,000 BF 4/4 capacity each, 100,000 BF capacity total, 10 year effective life remaining, includes all controls in room beside kiln

261
American Wood Dryers Dry Kilns
Labeled kilns 6, 7, 8, 3 units, built together, 50,000 BF capacity each, 150,000 BF total capacity, includes all controls for kilns 6, 7, 8 in the kiln control room

262
Hildebrand Dry Kilns
Labeled as kilns 4 and 5, 2 units, built together, 40,000 BF capacity each, 80,000 BF total capacity, includes all controls for kilns 4 and 5 in kiln control room

263
Irvington Moore Dry Kilns
Labeled as kilns 1, 2, and 3, 3 units sold together, 70,000 BF at 4/4 capacity each, 210,000 BF total capacity, Pre-Fab construction in late 80s, 10 year effective life remaining, includes all control panels and contents of small room built on back side of kilns 1-3

264
Dry Kiln Office
Include office contents of dry kiln control room 2 desks, chains, Dell computer, printer, no electrical included

265
Sullair LS12-50H Air Compressor
SN: 003-105198, 125 psig, meter reads: 42491 hours, 50 hp electric motor, includes cutoff box, includes air line from compressor to air dryer, includes 6' x 10' x 90" tall steel frame and 30" floor fan

266
2005 Quincy QSI-370 Air Compressor
SN: UN053679, meter reads: 18963 hours, 75 hp electric motor, includes electric cut out box, 54" x 7' x 5' tall skid unit, includes air line from compressor to air dryer

267
General Pneumatics TK500 Refrigerant Air Dryer
Electric drive, includes electric cut off box, includes all air line from dryer to equipment throughout yard

268
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268A
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268B
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268C
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268D
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268E
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268F
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268G
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268H
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268I
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268J
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268K
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268L
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268M
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268N
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268O
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268P
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268Q
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268R
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268S
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268T
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268U
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268V
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268W
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268X
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268Y
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268Z
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269A
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269B
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269C
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269D
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269E
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269F
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269G
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269H
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269I
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269J
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269K
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269L
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269M
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269N
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269O
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269P
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269Q
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269R
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269S
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269T
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269U
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269V
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269W
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269X
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269Y
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269Z
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270A
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270B
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270C
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270D
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270E
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270F
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270G
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270H
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270I
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270J
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270K
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270L
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270M
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270N
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270O
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

271
Information Lot
Information Lot Mill was started up in 2021. Was purchased in November 2022 with the intent to install and use. The owner went a different direction. Pictures of equipment installed and uninstalled.

271A
Meadows 3 strand log deck
(1st Lot in Entirety) - 22'x 10' 3 strand with H78 chain, hydraulic Tulsa winch drive, 3 arm stop & loader with nose skids. No hydraulic supply.

271B
Meadows chain type log turner
(Part of Entirety.) 2002, (sn: LT-09-02) includes pedals in cab and valve under the saw cab, steel support to the ground.

271C
Meadows Deluxe #3 Hydraulic Carriage
(Part of Entirety) 15', Deluxe #3 4 Head Block, (sn: 3D-0107-03) 48" capacity, 43" track center, Head Block spacing 1st to 2nd: 6 ft. 2nd to 3rd: 3 ft. 3rd to 4th: 3 ft. Includes 55' track, Digital Electronic setworks (Setworks program instructions are in sawyer's cab on clip board. Steel support to ground as marked.

271D
Meadows Hyd. Carriage Drive
(Part of Entirety) 50 hp electric motor, no motor controls, includes pump and cable drum assembly. No steel support

271E
Meadows Sawyer's cab
Part of Entirety.  6'x4', A/C and heat. Includes steps and catwalk platform around cab, steel support to the ground.

271F
Roll Case
Part of Entirety.  2' live rolls, 24"x6" in front of sawyers cab, gear motor drive.

271G
Meadows Slab Dump Conveyor
Part of Entiret.12'x24" air operated, steel supports to ground. 

271H
Meadows Deluxe #3 Entirety
Lots 271A-271G with a 10% raise to open the bid. 

271I
McDonough R. H. Band Mill
1st Lot of Entirety. 54", right hand, 7 1/4" face, 1" thickness on top wheel, (sn: 54-EC1563) air strain, hood assist, 54"x 17" slab belt, hydraulic guide.

271J
15 HP Hydraulic Pack
Part of Entirety.  No motor controls, steel base to ground as marked.

271K
75 HP Motor
Part of Entirety. 1775 RPM, 365T frame. Electric.

271L
Siemens SIKO Start 3RW34 75 hp soft start
Part of Entirety. 125 amp disconnect includes the wires to the motor.

271M
(11) Band mill Saw blades
Part of Entirety. (11) Band mill Saw blades - (9) in the sawmill, (2) in the building to left of sawmill. 348"

271N
McDonough Guild Grinder
Part of Entirety. McDonough Gild Grinder - (sn: BDM-1125).

271O
McDonough R. H. Band Mill Entirety
Lots 271I-271N tied together with a 10% raise.

271P
Slab Belt Conveyor
18'x 30', gear reduction drive, steel support to the ground.

271Q
Dust Conveyor
20' Drg Chain Conveyor includes 3' cyclone, steel support

271R
Meadows Slab Belt Conveyor
15'x 24"" with air operated includes a 26"" hold down roll.

271S
Slab Belt Conveyor
Slab Belt Conveyor - 35'x16" with gear motor drive, steel support to the ground.

271T
Meadows Blower
Meadows Blower - 24", 20 hp motor, 10" diameter infeed and outfeed includes Siemons Disconnect.

271U
Cutler Hammer Starters
Cutler Hammer Starters - 15 HP, 20 HP, 50 HP, 1/3 HP.

271V
Lumber Transfer Deck
Lumber Transfer Deck - 5 Strand, 21'x10' with roof top chain, gear reduction drive.

271W
Lumber Transfer Deck
Lumber Transfer Deck - 5 Strand 12'x 10' with roof top chain, 2' 3 strand air lift transfer, gear reduction drive.

271X
Slab Belt Conveyor
Slab Belt Conveyor - 25' x 18" waste conveyor, gear motor drive.

271Y
Catwalk and stairs
Catwalk and stairs - Around the edger to mill. Black in color.

271Z
Lumber Transfer Deck
Lumber Transfer Deck - 35'x8.5' 4 strand with 81X chain, (2) pin operated air stops, gear reduction drive. Steel support to ground.

272
Gravity roll case
Gravity roll case - 9' with 14" rolls.

272A
Vibrating Conveyor
Vibrating Conveyor - 22' long with 18" bottom, 10" flared sides, 28" top.

275
Skate Rolls
2 x 26 1/2" rolls, 5" spacing, (2) 30" x 10', (1) 30" x 4'

276
Skate Rolls
18" x 10'

277
Skate Rolls
2 1/2" x 8 1/2" rolls, 3 1/2" spacing, (3) 12" x 8' sections

278
Material Cart
18" x 9', 12" pan, 15" sides

279
Lumber Cart
44" x 8'6" x 30" high, no wheels

280
Crosby Dbl End Trim Saw
SN: 42096, size: 2-620, 80" x 26' overall, 10 hp electric motor on each head, 20" blades, both heads moveable

281
Pallet Racking
(24) 12' posts, (7) 4' x 12' uprights

282
Lumber Cart
4' x 11' x 40" high, needs miner repair

283
Lumber Cart
4' x 9' x 40" high, missing 2 wheels and 1 upright

284
Lumber Cart
3' x 9', no wheels, missing 1 upright

285
Lumber Rack
54" x 7' x 54" high

286
Lumber Rack
54" x 7' x 54" high

287
Belt Conveyor
66" belt, 7' x 51', no drive

288
Roach Belt Conveyor
SN: 386447, Electric drive, 30" belt, 2" sides, 3' x 17'

290
Hydraulic Oil Tank
275 gallon tank on stand, includes 7' x 7'6" x 10" deep spill containment box

291
Hydraulic Oil Tank
275 gallon tank on stand

292
Hydraulic Oil
(2) 55 gallon barrels, hand pump, 31" x 85" x 10" deep containment box

293
Hydraulic Oil
(2) partial 55 gallon barrels, 31" x 85" x 10" deep containment box

294
Storage Container
92" inside height and width, 8' x 20', includes steel frame under container as well

295
Shelf with Contents
18" x 3' x 8' tall shelf, includes all contents, conduit fittings, electrical parts

296
Bin Organizers with Contents
(2) 12" x 34" x 42" organizers with conduit fittings, 12" x 48" x 18" wooden shelf with electric parts

297
Shelf with Conduit Parts
14" x 60" x 48", includes all contents on and on top of shelf

298
Steel Cabinet with Contents
2' x 6' x 6' tall, greasy fluids, air line, cutting torch leads, mirror, welding wire

299
Self Dumping Hopper
1 1/2 yd., on castors, 3' x 52" x 32" deep

300
Barrel Dolly

301
Shop Cart
20" x 36" x 38" tall, 2 dust pans, 55 gallon barrel of multi-purpose absorbent

302
Steel Cabinet with Contents
2' x 6' x 6', 3 bags of absorbent, bottle of industrial cleaner

303
3 Ton Chain Hoist
Mounted to ceiling beam, includes steel mounting bracket

304
Miller Dialarc 250 AC/DC Welder
SN: KA859746, 200/230/460V, single phase, 103/90/45 amperes, includes leads and welding rods, mounted on steel frame

305
Delta Tablesaw
110V plug in, works as it should, 17" x 26" tabletop, 7" blade

306
Spool Cart
24" x 42" x 52" tall cart with spools of wire and air hose, on castors

307
Pallet of Multi-Purpose Shop Absorbent
Approx. 38 full 40 lbs. bags

308
55 Gallon Barrels
(1) barrel with anti freeze and hand pump, (1) barrel of ATF fluid, (1) barrel of AW46 hydraulic oil, (2) empty barrels, 52" x 52" x 8" deep spill containment pallet

309
Cutting Torch Set
Includes cart, tanks, gauges, leads, and torch

310
Acetylene Tank
Empty

311
Acetylene Tank
Empty

312
Acetylene Tank
Empty

313
Acetylene Tank
Empty

314
Acetylene Tank
Empty

315
Oxygen Tank
Empty

316
Oxygen Tank
Empty

317
Jet Metal Cutting Band Saw
110V plug in, includes roller stand

318
Steel Workbench
32" x 8" x 3' tall, 5" bench vise, includes all contents, bearings sprockets, gear chain, hydraulic pump, c-clamp

319
Underlayment Paper
10' wide roll, length unknown, used for flower beds, etc.

320
Wood Stove
Shop made out of (2) 55 gallon drums, includes stove-pipe, charcoal grill

321
Bin Organizers
16' x 20' x 4' tall, sliding shelves with assorted parts and hardware, includes stand of assorted threaded rods

322
Fans
(4) 30" fans, 3 on stands, 1 for wall mount

323
CM 2 Ton Chain Hoist
SN: PI-8, Series 622

324
Table with Contents
38" x 75" x 38" tall, hand tools, C-clamps, O-rings, bearings, key stock, hose repair kit

325
Steel Cabinet
2' x 6' x 6'

326
Pipe Benders
(1) up to 1" pipe, 4' handle, (1) up to 1 1/2" pipe, 54" handle

327
Daytona Floor Jack
Approx. 2 ton rating

328
Wheelbarrow and Brooms
2 brooms

329
Vevor Jack Stands
Adjustable and collapsible, 4 pieces

330
Pallet of Tools
Fuel jugs, jackstands, battery charger, hole saw set, Milwaukee hammer drill, 7" angle grinder

331
Pallet of Belt Lacing
Flexco lacing, alligator lacing tool, (2) roller lacer tools

332
New Chain
9 boxes of 81XR chain, 10' per box

333
New Chain
3 boxes of Ansi 140 RIV Lynx HD chain, 10' per box

334
New Chain
4 boxes of 100R chain, 10' per box

335
New Chain
1 box of 80R chain, 1 box of 803RX, 1 box of 50-1RV, 10' per box

336
Hose Reels
1 reel with air hose, 1 reel with extension cord

337
Desk Supplies
Office Desk and chair and contents, hard hat, 1st aid kit

338
Miller CP-300 Wire Welder
SN: JH172444, 200/230/460V, 3 phase, Miller R-115 Wire Feeder, includes leads, gun, and tanks, mounted on cart with castors

339
Steel Saw Horses
4' x 20" tall

340
Shelf with All Contents
2' x 4' x 78" tall shelf, bearings, planer wheels, lumber cart wheels, torch gauges, hand tools

341
Steel Table with All Contents
3' x 54" x 3" tall, 5" Columbian Bench vise, assorted chain parts

342
Hose Reel
Includes air hose

343
Lincoln Idealarc 250 Welder
Model: Tig 250, SN: AC-528233, 208/230/460V, includes mask and leads, mounted on cart with castors

344
Dry Rod II Electrode Oven
120/230V

345
Planer Wheels
All new wheels, 30 pieces, fit lot 164

346
Planer Parts
Lots of new parts, gearboxes, bearings, housings, chain. Fits lot 164.

347
Pallet of Parts
25 hp, 284T frame, 460V, 1760 rpm, electric motor, assorted pipe fittings, metal cut off saw, metal clamps

348
Steel Table
4' x 82" x 40" tall, on castors, 5" bench vise, pipe clamps, dust pipe fittings

349
Westward 20 Ton Shop Press
Model: 1MZJ6

350
Nesco 8" Bench Grinder
110V plug in, mounted to steel frame with fork pockets

351
Powermatic 1150A Drill Press
SN: 95158108, 110V plug in

352
Shelf with Contents
18" x 3' x 7' tall, lots of welding supplies

353
Steel Cabinet
2' x 5' x 7' tall, chain, welding wire

354
Shelf with Parts
20" x 5' x 4' tall, (3) brand new WEG 3 hp motors, air line parts, gearbox

355
Bolt Bin Organizers
(1) 16" x 20" x 5', (1) 12" x 34" x 30", includes all contents

356
Bolt Bin Organizers
16' x 28' x 7' wooden shelf, battery charger, includes all contents

357
Bolt Bin Organizers
12" x 34" x 65" tall, includes all contents

358
Bolt Bin Organizers
12" x 34" x 65" tall, includes all contents

359
Bolt Bin Organizers
12" x 34" x 65" tall, includes all contents

360
Bolt Bin Organizers
12" x 34" x 70" tall, includes all contents

361
2005 Quincy QSI-370 Air Compressor
SN: UN053678, meter reads: 27,542 hours, uninstalled 75 hp electric motor

362
10" Fan Blower
10" inlet, 7 1/2" x 10" outlet, electric drive

363
Pallet of Electric Panels
(3) control panels

364
Pallet of Aluminum Jig Parts

365
Pallet of Electric Boxes
Panels, conduit boxes, cutoffs, starters

366
Pallet of Misc.
GreCon Control panel, 30" fan

367
Hoffman Electrical Control Station

368
DeWalt Radial Arm Saw
Model: 3251, SN: 62170117, electric drive, 12" blade, 3' x 4' x 6' tall

369
Pallet of Electrical Boxes

370
2006 Holtec Pack Saw
Model: Transcut II, SN: 05334, no bar, electric drive

371
NYB 18" Dust Blower
16" inlet, 12" x 18" outlet, electric drive

372
Pallet of Electrical Panels
Also includes roller and steel clips

373
Water Pump Unit
Electric drive, 28" x 28" x 44" tall

374
Hevi-Duty Transformer
3 phase, 120CT/240D to 480D

375
Pallet of Electrical Parts
Breakers and switches

376
Electric Motor on Stand
7.5 hp, 1745 rpm, 230/460V

377
Pallet of Misc.
Belts, first aid kit, grease gun

378
GE Transformer
3 phase, 480V-575V, cut off boxes

379
Pallet of Electrical Boxes

380
Pallet of Electrical Boxes

381
Jesco 1/2 Yard Self Dumping Hopper
2000 lbs. capacity

382
1 Yard Self Dumping Hopper
On castors

383
Jesco 1/2 Yard Self Dumping Hopper
2000 lbs. capacity

384
Saw Blades
10-20" blades, used, some sharpened

385
Pallet of Bearings, Sprockets, and Parts

386
Pallet of Assorted Lights

387
Pallet of Assorted Lights

388
Pallet of Parts
Planer wheels, feed chain parts

389
Pallet of Electrical Parts

390
Pallet of Parts
Sprockets, water pump, electric components, chain, saw blades, control panel

391
Pallet of Electrical Parts

392
Pallet of Electrical Parts

393
Pallet of Electrical Parts

394
Pallet of Misc.
Belts, fuses, water heater, chain pulleys, 9'6" extension ladder

395
Pallet of Misc.
Fittings, valves, blades, poly blocks

396
Pallet of Electric Motors
8 new motors (1-3 KW), assorted deck chain

397
Pallet of Poly Strips

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Formerly JT Shannon Lumber Company
 Live Auction
 
Auction Date(s)
Thursday Dec 7, 2023 Completed
Auction Location

Horn Lake, MS 38637
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  2. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
  3. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:
“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

 

  1. Governing Law.
    1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
  2. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
  3. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  4. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
  5. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  6. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  7. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
    2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
    4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  2. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  3. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  4. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  5. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
  6. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  7. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  8. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  9. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
  10. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  11. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
  12. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  13. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
  14. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  15. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  16. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
  2. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
  3. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  4. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  5. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
  6. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
  7. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  2. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
  3. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
  4. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  5. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  6. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  7. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  8. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  9. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  10. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

 
Onsite and online auction

00
Information Lot
Highlight Pieces: MIC Lumber Trim, Sort, & Stack System, Sorter, Boiler, Wood Waste System, Dry Kilns, Planer System, and More!
December 7, 2023
9 am Central Time


Auction Agent: Zach Kittrell 931-224-0699

01
Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: December 6, 2023 9 AM to 5 PM or any time by appointment. Contact Allison Kittrell for appointment outside this time 931-698-7058
Location of Auction: 2200 Cole Road, Horn Lake, MS 38637

02
Loadout Information
Smalls and Pallets available for load out immediately following the auction until 4 pm. Friday and Monday Dec 8 and 11, Bright Star Staff Assistance 8-4pm. Contact Zach 931-224-0699 or Allison 931-698-7058.  

Rigging Option: Paul Avery 270-543-1919 
Uninstalled  30 days
Installed 90 days

If choosing to rig your own equipment, please provide certificate of insurance naming General Millworks, 2200 Cole Road, Horn Lake, MS 38637 as the beneficiary. Liability policy for $1 million. COI must be submitted to ak@brightstarauctions.com prior to entering the property to rig the equipment. 
 

03
Payment Information
Payment terms: 7% sales tax, 10% Onsite and 13% Online Buyer's Premium in affect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 
 

04
3156G Live Heel Log Loader 1/50 Die-Cast Metal Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

90
Heavy Equipment Key Set 36 Keys
Shipping available for $20

91
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

98
Ingersoll Rand Air Impact
Air powered, 1" drive, includes 1 7/8" socket

99
Lincoln 140 MP Power Mig Welder
SN: M3210817879, 110V plug in. Practically brand new, used 2 to 3 times. Can weld Mig, Tig, or Stide. Includes leads, gauges, and 2 boxes of welding rods

100
4 Strand MIC Transfer Deck
(1st of an entirety) 14' x 42', electric drive, includes support steel to first crossbeam, H78 chain, includes pallet with 5 new rolls of H78 chain

101
4 Arm MIC Tilt Hoist
(Part of an entirety) Hydraulic drive and cylinders, 6' arms, includes support steel to first crossbeam, 14' x 14' x 12'6" tall overall, includes steel frame and slide rack as marked

102
30hp MIC Hydraulic Pack
(Part of an entirety) 16" x 60" x 24" tank, includes pumps, valves, and all hydraulic lines to equipment

103
MIC Stacking Stick Conveyor
(Part of an entirety) Electric drive, 12" belt, 28" x 39', includes slide pans on both sides of belt as marked

104
MIC Stacking Stick Unscrambler
(Part of an entirety) Electric drive, 8'6" x 10' x 8'6" tall, (2) 27" steel slat strands, includes 50" x 56" x 70" tall stacking rack

105
MIC 5 Strand Transfer Deck
(Part of an entirety) 12' x 21', electric drive, roller chain, includes support steel to first crossbeam

106
MIC 6 Strand Unscrambler
(Part of an entirety) 29" steel slats (1 slat over 2 strands), 14' x 16' x 14' tall overall, electric drive, includes control stand, 6" x 54" rolls on top section, sorting pegs 30" on center, includes support steel to first crossbeam

107
MIC 5 Strand Transfer Deck
(Part of an entirety) 10'6" x 15', includes support steel to first crossbeam, electric drive, air cylinder on board loading arm, includes shared shaft with lot 111

108
MIC 5 Strand Transfer Deck
(Part of an entirety) 12' x 13', includes support steel to first crossbeam, electric drive, 6 strand 4' tipple arms, includes shaft shared with lot 109

109
MIC 5 Strand Transfer Deck
(Part of an entirety) 11'6" x 13', includes support steel to first crossbeam, electric drive, includes control panel, roller chain, 3 board stop arms with air cylinders, includes shaft shared with lot 110

110
MIC 5 Strand Transfer Deck
(Part of an entirety) 13' x 15', roller chain with pegs, electric drive, includes support steel to first crossbeam, 3' x 13' board tipple on end of deck, air cylinders on tipple

111
MIC 5 Strand Transfer Deck
(Part of an entirety) 12'6" x 13', electric drive, roller chain with pegs, includes support steel to ground

112
MIC 5 Strand Transfer Deck
(Part of an entirety) 11'6" x 13'6", electric drive, does not include shared shaft with lot 113

113
MIC 5 Strand Transfer Deck
(Part of an entirety) 12'6" x 12'6", electric drive, includes control panel, roller chain, 3 board stop arms with air cylinders

114
MIC 5 Strand Sorting Deck
(Part of an entirety) Electric drive, 12' x 12'6", hydraulic drive on rolls, roller chain with pegs, 6" x 15" rolls, does not include grade mark reader

115
Lucidyne Grade Mark Reader System
(Part of an entirety) Includes control panel by deck, stand with reader, steel bar with sensors going over deck, electrical panel included as marked, also includes label jet printer, screens, and monitors for camera system in office

116
Catwalk
(Part of an entirety) Includes all catwalk sections along lot 105-115, large support steel goes with equipment as marked

117
MIC 6 Strand Incline Transfer Deck
(Part of an entirety) 17'6" x 38', roller chain with pegs, 5 strand 40" board tipple, air cylinders on tipple, electric drive, includes support steel to first crossbeam, does not include shared shaft with lot 119

118
MIC 15hp Hydraulic Pack
(Part of an entirety) 16" x 60" x 16" tank, includes pumps, valves, and all hydraulic lines to equipment

119
MIC 8 Strand Sorting Deck
(Part of an entirety) Roller chain with pegs, infeed to trimmer, 11' x 23', includes chain feed through trimmers, include shaft on other side of trimmer shared with lot 121, electric drive on deck, hydraulic drive on rolls, 6 1/2" x 90 rolls, roller chain with pegs, includes support steel to first crossbeam

120
MIC 12 Head Drop Trim Saw
(Part of an entirety) 22" blades, air cylinders, electric drive, 7' x 24', 18" board length max, 20' waste conveyor belt, includes control panel, includes support steel to first crossbeam. In good condition

121
MIC 8 Strand Outfeed Sorting Deck
(Part of an entirety) Roller chain with pegs, hydraulic drive on rolls, electric drive on deck, includes sprockets on both ends of deck, does not include shaft on either end, 10'6" x 18", includes support steel to first crossbeam

122
6 Strand Transfer Deck
(Part of an entirety) Roller chain with pegs, 1 strand has no pegs, includes shaft shared with lot 121, includes support steel to first crossbeam, 13' x 72' long, electric drive

123
Softac Laser Beam Gauge
(Part of an entirety) SN: 3454, 120V, single phase power, includes steel frame, electrical/control panel and screen monitor

124
MIC 28 Bay Sling Board Sorter
(Part of an entirety) Electric drive, 5 strand roller chain with pegs, 20' x 130' long x 24' tall overall approximately, includes all control panels mounted on machine, includes 2 PLC control panels, 1 in office and the other on catwalk, includes support steel to ground, includes new parts, pallet of brand new chain, pallet of rubber wheels, poly strips for under chain

125
Catwalk Steps
(Part of an entirety) Includes all catwalk along lots 117-124, large support steel goes with equipment as lotted and marked

126
30hp Hydraulic Pack
(Part of an entirety) 30" x 60" x 48" tank, includes pumps, valves, and all hydraulic lines to equipment

127
30hp Hydraulic Pack
(Part of an entirety) (1) 16" x 60" x 30" tank, (1) 24" x 36" x 16" tank, cooling unit, valve station, includes pumps, all valves, and all hydraulic lines to equipment

128
3 Strand Transfer Deck
(Part of an entirety) H78 chain, electric drive, 11'6" x 11'6"

129
5 Strand Green Chain
(Part of an entirety) 81X chain, electric drive, 13' x 115", 2 electric drives, deck is split roughly in middle

130
5 Strand Incline Transfer Deck
(Part of an entirety) Electric drive, 81X chain, 12'6" x 16', includes support steel to ground, includes side board guard

131
MIC 6 Strand Unscrambler
(Part of an entirety) 28" steel slats, electric drive, hydraulic drive on rolls, 6" x 54" rolls, 14' x 14' x 9'6" tall overall, includes support steel to ground

132
5 Strand 7' Board Stacker
(Part of an entirety) 81X chain, does not include package rolls or elevator rolls, 4' power feed arm, control panel, 13'6" x 25'6", includes support steel to ground, electric drive on deck to ground, electric drive on deck, hydraulic drive and cylinders on stacking parts

133
Catwalk Section
(Part of an entirety) Includes all cat walk by lot 130-135, includes support steel not lotted otherwise

134
MIC Above Ground Elevator Roll Case
(Part of an entirety) 8 1/2" x 82" rolls, 18"-30" spacing, hydraulic drive, hydraulic cylinders for lift, includes control panel and reader, 9' x 20'

135
Package Roll Case
(Part of an entirety) 8 1/2" x 84" rolls, 30" spacing, 100" x 24'6", hydraulic drive

136
5 Strand Transfer Deck with Rolls
(Part of an entirety) 81X chain, electric drive on deck, no drive for dead rolls, 13' x 37' overall, 15'6" section of deck is pop-up with air cylinders

137
Stacker Motor Control
(Part of an entirety) Motor control center and PLC control electrical panel, includes conduit from panel to equipment

138
2 Strand Transfer Deck
(Part of an entirety) Roller chain, electric drive, 6' x 40' x 7' tall

139
Motor Control Center
(Part of an entirety) Motor control center for lots 100-approx 110, includes conduit from panel to equipment

140
Sullivan Palateck H25D4 Air Compressor
(Part of an entirety) Meter reads: 49,225 hours, 25 hp electric motor, includes air lines from compressor to tank to air dryer, 24 x 64" horizontal air tank

141
HP Refrigerated Air Dryer
(Part of an entirety) Model: SE-20A, SN: 2105056, 70 cfm, includes only blue steel air line to air filter

143
Structural Steel
(Part of an entirety) Includes all structural steel in sorter building. On elevated equipment-structural steel to the first crossbeam will go to equipment, all other support steel (not including catwalk) is included in this lot.

145
Conduit
(Part of an entirety) Includes all conduit from 440V/480V panels to equipment, does not include any panels or infeed wire to panels, does not include any 110V conduit or panels

146
Contents of Office by Sorter
(Part of an entirety) Floor fan, 3 chairs, desks, mini fridge, includes electric boxes as marked, 1st aid kit, eye wash station

146A
MIC Sorter Entirety of Lots 100-146
With 10% raise.

147
Steel Workbench
42" x 60 x 56" tall, 5" bench vise

148
Skate Rolls
2' x 10", 2 1/2" x 18" rolls, 8" spacing

149
Trim Saw Blades
(13) new in box 22" - 1" arbor, (10) used and sharpened 22" - 1" arbor, (10) used but some are sharpened 20" - 1" arbor, includes blade organizer

150
Parts for Trimmer/Sorter Line
2 cabinets of parts for lots 100-141, chain, bearings, cylinders, sprockets, etc. (1) 29" x 6' x 52", (1) 20" x 38' x 68" tall

151
Poly Strips
Large assortment of new poly strips for transfer decks

152
Lumber Cart
52" x 10"

153
Lumber Cart
27" x 52"

154
Cyclone and Stand
Includes steel frame to ground, pipe adapters, 100" x 21' infeed

155
FIFO/Eagle Lumber Dip Tank
Roll case (7" x 78" rolls, 36" spacing), 100 x 21" outfeed roll case (7" x 78" rolls, 3' spacing), 8' x 25' x 8' deep tank, spill containment trays under rolls, electric drive and air cylinders on rolls, package roll case in tank, electric drive for tank, includes all support steel to ground, include all electrical boxes as marked, includes conduit from boxes to equipment, includes chemical tanks and pump on top of catwalk, includes all catwalk and steps around dip tank.

156
Challenge Air E-50 Air Compressor
SN: AS5090092, 5 hp electric motor, includes cut off box, mounted on 80 gallon horizontal tank, includes additional 24" x 48" vertical air tanks, includes air line from compressor and tank to equipment

157
MIC 5 Strand Transfer Deck
(1st of an entirety) 81X chain, electric drive, 14'6" x 26'6", includes support steel to ground unless otherwise marked

158
MIC 5 Arm Tilt Hoist
(Part of an entirety) Hydraulic drive and cylinders, 80" arms, 14' x 14'6" x 11'6" tall overall, includes all support steel to ground, includes control panel

159
MIC Stacking Stick Belt Conveyor
(Part of an entirety) Includes both slide pans as marked, 12" belt, 2' x 30', electric drive

160
MIC Stacking Stick Unscrambler
(Part of an entirety) Electric drive, 7' x 9'6" x 8'6" tall overall, (2) strands of 21" steel slats, includes steel stacking frame, control panel

161
MIC 30hp Hydraulic Pack
(Part of an entirety) 16" x 60" x 30" tank, includes all pumps, valves, cooling unit, and all hydraulic lines and hoses to equipment

162
MIC Breakdown Line Entirety of Lots 157-161
With 10% raise.

163
5 Strand Transfer Deck
Electric drive, 81X chain, 12'6" x 24', includes welded steel bars on both ends, includes support steel to ground, control panel

164
Newman S-382 Double Surfacer
(1st of an entirety) SN: 15169, 460V (1) 40 hp electric motor, (1) 75 hp electric motor, 6" x 30" capacity, hydraulic drive, on press down rolls and feed rolls, (2) 32" spiral index cutting heads, includes electrical/control panel and all conduit from box to planer, no dust pipe included, includes support steel to ground

165
Infeed Belt Conveyor
(Part of an entirety) Hydraulic drive, 28" belt, 0"-7" sides, 3' x 31', includes support steel to ground

166
5 Strand Outfeed Deck
(Part of an entirety) H78A rooftop chain, steel slant deck for loading, 13' x 22', includes support steel to ground, electric drive, control box

167
25hp Hydraulic Pack
(Part of an entirety) 27" x 60" x 13" tank, includes pumps, valves, coding unit, and all hydraulic lines to equipment

168
Roach Belt Conveyor
(Part of an entirety) SN: 240782, Electric drive, 23" belt, 28" x 28'

169
Catwalk Around Planer
(Part of an entirety) Includes all catwalk and steps beside and around lots 163-168, does not include support steel lotted otherwise

170
Newman S-382 Planer Entirety of Lots 164-169
With 10% raise.

171
Electrical Panels
(1) 120V/480V with motor starters, (1) 120V PLC control panel, does not include any conduit

172
Conduit
Includes all conduit from the panels in lot 171 to equipment, no infeed wire to boxes included

173
Stacking Rack
(2) 42" x 42" high

174
Skate Rolls
18" x 10'

175
Doucet Conveyor
Model: BTRS-70-35-144-T6-30-228, SN: 7002-01-152, 74" x 12'6", air cylinders and 480V electric drive, 2" x 34" rolls, 3" spacing

176
Skate Rolls
20" x 9'8", 2 1/2" x 16" rolls, 6" spacing

177
5 Strand Green Chain
81X chain, control panels mounted on deck, includes catwalk section beside green chain, 15'6" x 85', electric drive

178
2000 Veco Plan Waste Grinder
SN: 524101, type: 45/12/2, 50 hp electric motor, 8" x 18" infeed capacity, no dust pipe included, includes electrical control panel, includes conduit from box to equipment

179
Re Tech Vibrating Conveyor
Electric drive, 27" x 17'6", 18" pan, 6" flared sides, includes grinder infeed section

180
Hytrol Skate Rolls
16" x 40" x 38" tall, 2" x 12 1/2" rolls, 2 1/2" spacing

181
Lumber Stacking Cart
4' x 4' x 44" tall

182
Dust Pipe
Includes all dust pipe in building, lots of adapters and fittings

183
400 Gallon Vertical Air Tank
40" x 8'6" tall, includes infeed pipe as marked

184
Aircel Refrigerant Air Dryer
Model: DHT-50, SN: H1CEVA1769, 50 scfm, max 200 psi, 115V, includes lines from tank to dryer, and from dryer to equipment

185
Picture Tally
6' x 7' x 100" tall cab, includes computer, monitor, printer, and control box in cab, includes disconnect box

186
3 Strand Transfer Deck
9' x 50', electric drive, includes catwalk and steps on sides, 81X chain

187
Lumber Paint Gun
Includes 1 partial 1 full tank of lumber end paint, spray gun with hose

188
Steel Workbench
2' x 8' x 43" tall, includes 18" x 28" shop cart

189
Steel Workbench
20" x 10' x 38" tall

190
DeWalt 14" Chop Saw
Sn: 000967, 110V plug in, includes 21" x 12' x 38" tall table

191
Office Supplies
Includes all contents of upstairs office, table, 4 chairs, desk, filing cabinets, computer monitors, cabinets, printer, first aid kit, coffee maker

192
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

192A
Lumber Cart
4' x 9' x 40" high, adjustable length

193
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

194
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

195
Lumber Cart
44" x up to 12' x 42" tall, adjustable length

196
Lumber Cart
32" x 9', adjustable length

197
Lumber Cart
42" x 8' x 40" tall

198
Lumber Cart
44" x 8'6" x 32" tall

199
Lumber Cart
4' x 4' x 42" tall

200
Lumber Cart
4' x 4' x 42" tall

200A
Cutler Hammer Easy Start ES
Solid state reduced voltage motor starter

201
2012 Taylor TX300M Forklift
SN: SGE37884.
Meter reads: 18,993 hours.
Engine: Cummins QSB 6.7 160hp(SN: 73277827).
Fuel type: Diesel.
Load capacity: 30,000 lbs.
Stage mast: 2.
Mast height: 13'1".
Side shift: Yes.
Fork positioner: No.
ROPS: Enclosed.
Tire size: 12.0-20.
Tires: Pneumatic.

Features and Notes: Machine weight: 40800 lbs., 12" x 6' forks. Good running machine

202
2007 Taylor T360L Forklift
SN: SBG34675.
Meter reads: 3959 hours.
Engine: Reman 6 cylinder Cummins (Reman date 06/30/2020, family # 4CEXL0359AAD)
Fuel type: Diesel.
Load capacity: 33,690 lbs.
Stage mast: 2.
Mast height: 13'1".
Side shift: Yes.
Fork positioner: No.
ROPS: Enclosed cab.
Tire size: 12.0-20.
Tires: Pneumatic.

Features and Notes: Machine weight: 42900 lbs, 9" x 6' forks. Good running machine.

203
Toyota 7FGCU25 Forklift
SN: 04633.
Meter reads: 3474 hours.
Fuel type: LP.
Load capacity: 4500 lbs.
Stage mast: 3.
Mast height: 7'.
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 21x7x15, (rear) 16x5x10 1/2.
Tires: Solid.

Features and Notes: 4" x 48" forks. Good running machine

204
2010 Nissan MP1F2A25LV Forklift
SN: P1F29H3401.
Meter reads: 11,452 hours.
Engine: Nissan ANSXB02.147D.
Fuel type: LP.
Load capacity: 4,050 lbs.
Stage mast: 3.
Mast height: 86".
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 7.0-12, (rear) 6.0-9/4.0.
Tires: Solid.

Features and Notes: Machine weight: 8850 lbs, 4" x 48" forks. Good running machine

205
Mitsubishi FG25N Forklift
SN: AF17D02783.
Meter reads: Battery dead.
Engine: Nissan 6NSXB02.147C.
Fuel type: LP.
Load capacity: 4,790 lbs.
Stage mast: 3.
Mast height: 82".
Side shift: Yes.
Fork positioner: No.
ROPS: Open.
Tire size: (front) 7.0-12, (rear) 6.0-9/4.0.
Tires: Solid.

Features and Notes: Does not start, 4" x 48" forks, needs new battery.

209
New 2023 Traner TR850 Ride on Road Roller
SN: TR8502314, electric start, front wheel size 21.87" x 27.56", exciting force 20KN

210
2023 J&C Dump Trailer
VIN: 7N7J8PE2XNC002348, GVWR: 12000 lbs., pulls with 2 5/16" ball, needs new trailer jack, battery for hoist not included, 7' x 12' x 2' deep plus 4' tall wooden sides, 17' long overall, ST235/80R16 tires. Nice dump trailer.

211
2023 J&C Dump Trailer
VIN: 7N7J8PE26NC002346, GVWR: 12000 lbs., battery powered dump-works great, pulls with 2 5/16" ball, 7" x 12' x 2' deep box with partial 4' wooden sides added, ST235/80R16 tires. Nice dump trailer!

212
Titan Skid Steer Dust Bucket
Standard quick attach, 4' x 7' x 38" deep, heavy duty. In excellent condition.

213
Durabilt Landscraper
Pulls with pin through hitch, 10' wide, 2 hose hydraulic hookup, hydraulic cylinders for blade adjustment, 15' long overall, 7.60-15SL tires

215
3 Strand Transfer Deck
(1st of an entirety) H78 chain, electric drive, 12' x 24'6", includes section of catwalk steps

216
4 Strand Tip Hoist
(Part of an entirety) Electric drive, 11' x 12' x 8' tall overall, 6' arms

217
Belt Conveyor
(Part of an entirety) Includes slide pan, electric drive, 8" belt, 10" sides, 14" x 28' flat section, 20' incline section

218
4 Strand Transfer Deck
(Part of an entirety) 81X chain, 11'6" x 18' plus 3' tipple arm section, electric drive, includes 7' steel bars welded to tipple arm, includes control panel, includes catwalk along side of deck

219
5 Strand Transfer Deck
(Part of an entirety) 81X chain, no drive included, does not include shaft shared with lot 220, does include sprockets 13'6" x 22'

220
4 Strand Green Chain
(Part of an entirety) Electric drive, 81X chain, includes shaft shared with lot 219, 12'6" x 65'

221
Break Down Line Entirety of Lots 215-221
With 10% raise.

222
Delta Radial Arm Saw
Model: 40-C, SN: DB5367, 14" blade, 26" x 45" tabletop, 220/440V electric drive, 28" x 13' skate roll feed

223
Electrical Boxes and Conduit
Includes all electrical boxes in building as marked, motor starters and disconnects, includes all conduit from marked boxes to equipment, no infeed wire included

224
Stacking Rack
54" x 82" x 54" tall, includes approx. 1500 stacking sticks- 3/4" x 1 1/4" x 72" long

225
Lumber Cart
42" x 10' x 40" tall, adjustable length

226
Lumber Cart
42" x 10' x 40" tall, adjustable length

227
Lumber Cart
42" x 10' x 40" tall, adjustable length

228
Lumber Cart
42" x 10' x 40" tall, adjustable length

229
Lumber Cart
42" x 10' x 40" tall, adjustable length

230
Lumber Cart
42" x 10' x 40" tall, adjustable length

231
Lumber Cart
42" x 10' x 40" tall, adjustable length

232
Fans
(1) 36" floor fan, 3 prong plug in, (2) 24" fans mounted to wall, 110V plug in

233
2011 Vecoplun Waste Grinder
Model: RG52/100SWU, SN: 12810-010, 460V, 125 hp electric drive, includes Allen Bradley electric control panel with starter, 6' x 7' top feed, bottom eject, screen with 1" holes, includes small hydraulic pack for push cylinders

233A
Screen for Grinder
1" holes

234
Belt Conveyor
53" belt, electric drive, 8' x 22' overall, includes 90" x 16' steel safety panel

235
Dayton 30" Dust Blower
(1st of an entirety) 25 hp electric drive, 18" inlet and outlet, includes uninstalled adapters as marked, includes all pipe from blower to cyclone, approx. 100' of 18" galvanized

236
60" Dust Blower
(Part of an entirety) 30" wide, 36" inlet and outlet, includes inlet pipe from blower to wall of building, includes all outlet pipe from blower to adapter on bag house, 125 hp, 230/460V electric motor, includes motor starter and disconnect inside building

237
48" Dust Blower
(Part of an entirety) SN: 889011, Size: 3046, 28" wide, 100 hp, 230/460V electric motor, 32" inlet and outlet, includes inlet pipe from blower to wall of building, includes outlet pipe from blower to adapter on bag house, includes motor starter and disconnect inside building

238
Cyclone with Stand
(Part of an entirety) 14'8" x 15' x approx. 27' tall frame, 14'6" x 30' cyclone with fittings and adapters

239
Torit Bag House Collector
(Part of an entirety) 12' x approx. 60' tall, has airlock on bottom, includes 7 1/2 hp air compressor for air lock, includes all air line from compressor, no dust pipe included, includes all support steel for bag hours and adapters

240
42" Dust Blower
(Part of an entirety) 20" outlet, 24" inlet, 18" wide, 40 hp 460V electric motor, includes all inlet pipe from blower to where it goes into building, includes all pipe from blower to cyclone

241
36" Dust Blower and Bag House
(Part of an entirety) 16" wide, 20" inlet and outlet, electric drive, 460V, includes all pipe to and from blower, 54" x 6' x 15' tall bag house with Frome, includes all pipe and adapters, has airlock on bottom

242
Concrete Dust Bin with Cyclone and Unloader
(Part of an entirety) 30' x 75' concrete silo made from 20" thick blocks, approx. 14' x 25' cyclone on top of silo, with unloader 20' auger style unloader at bottom of silo with electric drive, includes all dust pipe to and from silo and cyclone that is not lotted otherwise

243
20hp Hydraulic Pack
(Part of an entirety) 27" x 48" x 14" tank, includes pumps, valves, and all hydraulic lines to equipment

244
Electrical Boxes
(Part of an entirety) Includes all electric panels as marked for lots 238-243, includes conduit from boxes to equipment

245
Dust Collection System Entirety of Lots 235-245
With 10% raise.

246
Self Dumping Hopper
5' x 13' x 4' deep, has fork pockets

247
Self Dumping Hopper
5' x 8' x 32" deep, has fork pockets

248
Dust Auger
Electric drive, 12" auger, 20' long, includes transfer box from silo unloader

248A
16" Fines Blower
Electric drive, 6" inlet, 5" outlet, includes all pipe to and from blower

249
Dust Auger
12" auger, electric drive, 40' long

250
Dust Auger
12" auger, has airlock for loading, 12' long, feeds into boiler

251
1996 Hurst Boiler System
(1st of an entirety) 8' x 22' x 12' tall heat exchange units, 3" x 5' x 4" air holding tank by exchange units, (1) 36" and (1) 30" blowers by boiler, Hurst control panel in office with Power Flex 400 panel, includes all contents of office, desk, chair, computer, printer, maintenance books, electrical panels, window AC unit, water softener with reserve tanks and pallet of salt, pallet jack, scissor lift cart, Quincy QT-5 compressor on 60 gallon vertical tank with Air Cel Refrigerated Air Dryer and 34" x 94" vertical air tank, includes all air lines, includes all reserve tanks and dust bins in boiler room, boiler control panels, includes all steam piping from boiler to equipment, includes steel cart with parts, (4) 30" x 4' x 8' tall cabinets with boiler parts, bolt bin organizer with lots of pipe fittings. Was last maintenance/repaired on 6/14/2023

252
Logan D4079 Power Plant
(Part of an entirety) 800 hp electric motor, 460V, does not include any steam pipe, includes Dresser-Rand electrical control panel (SN: D4079), rated at 550 hp, nice unit, 480V, 3 ph., 60 Hz, includes conduit from panel to motor control center

253
General Electric 8000 Distribution Panel
(Part of an entirety) 1200 amp, 480V, 5 sections, 20" x 101" x 92" tall, includes conduit from panel to equipment

254
Hurst Boiler Entirety of Lots 251-253
With 10% raise.

255
Hurst Boiler
Last repaired in 2015, includes everything in room with boiler, electrical and control panels, al steam pipe to equipment, power transformer, reserve tanks, feed bin, 18" blower, was used as backup boiler

256
48" Dust Blower
22" wide, 24" inlet and outlet, no drive-line shaft ready. Uninstalled sitting by Walnut steamers, includes 75 hp electric motor but it's not hooked up.

257
Walnut Steamer
Holds approx. 40,000 BF Pre-Fab package type, steam entry

258
Walnut Steamer
Holds approx. 30,000 BF Masonry Block construction, manual controls

259
2015 Hildebrand Dry Kilns
Labeled as kilns 11-14, 4 units tied together, 70,000 BF at 4/4 capacity per unit, 280,000 BF capacity total Pre-Fab construction, 12-15 year effective life remaining, wireless controls in kiln control room included, includes all control panels and contents of maintenance area behind kilns

260
American Wood Dryers Dry Kilns
Labeled kiln 9 and kiln 10, (2) units built together, 50,000 BF 4/4 capacity each, 100,000 BF capacity total, 10 year effective life remaining, includes all controls in room beside kiln

261
American Wood Dryers Dry Kilns
Labeled kilns 6, 7, 8, 3 units, built together, 50,000 BF capacity each, 150,000 BF total capacity, includes all controls for kilns 6, 7, 8 in the kiln control room

262
Hildebrand Dry Kilns
Labeled as kilns 4 and 5, 2 units, built together, 40,000 BF capacity each, 80,000 BF total capacity, includes all controls for kilns 4 and 5 in kiln control room

263
Irvington Moore Dry Kilns
Labeled as kilns 1, 2, and 3, 3 units sold together, 70,000 BF at 4/4 capacity each, 210,000 BF total capacity, Pre-Fab construction in late 80s, 10 year effective life remaining, includes all control panels and contents of small room built on back side of kilns 1-3

264
Dry Kiln Office
Include office contents of dry kiln control room 2 desks, chains, Dell computer, printer, no electrical included

265
Sullair LS12-50H Air Compressor
SN: 003-105198, 125 psig, meter reads: 42491 hours, 50 hp electric motor, includes cutoff box, includes air line from compressor to air dryer, includes 6' x 10' x 90" tall steel frame and 30" floor fan

266
2005 Quincy QSI-370 Air Compressor
SN: UN053679, meter reads: 18963 hours, 75 hp electric motor, includes electric cut out box, 54" x 7' x 5' tall skid unit, includes air line from compressor to air dryer

267
General Pneumatics TK500 Refrigerant Air Dryer
Electric drive, includes electric cut off box, includes all air line from dryer to equipment throughout yard

268
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268A
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268B
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268C
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268D
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268E
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268F
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268G
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268H
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268I
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268J
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268K
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268L
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268M
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268N
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268O
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268P
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268Q
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268R
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268S
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268T
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268U
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268V
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268W
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268X
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268Y
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

268Z
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269A
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269B
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269C
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269D
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269E
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269F
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269G
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269H
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269I
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269J
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269K
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269L
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269M
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269N
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269O
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269P
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269Q
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269R
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269S
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269T
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269U
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269V
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269W
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269X
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269Y
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

269Z
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270A
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270B
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270C
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270D
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270E
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270F
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270G
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270H
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270I
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270J
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270K
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270L
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270M
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270N
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

270O
Stacking Sticks
3/4" x 1 1/4" x 72" long, breeze dried mixed hardwood, approx. 3000-3500 sticks/bundle, 1 bundle per lot, mixed flute

271
Information Lot
Information Lot Mill was started up in 2021. Was purchased in November 2022 with the intent to install and use. The owner went a different direction. Pictures of equipment installed and uninstalled.

271A
Meadows 3 strand log deck
(1st Lot in Entirety) - 22'x 10' 3 strand with H78 chain, hydraulic Tulsa winch drive, 3 arm stop & loader with nose skids. No hydraulic supply.

271B
Meadows chain type log turner
(Part of Entirety.) 2002, (sn: LT-09-02) includes pedals in cab and valve under the saw cab, steel support to the ground.

271C
Meadows Deluxe #3 Hydraulic Carriage
(Part of Entirety) 15', Deluxe #3 4 Head Block, (sn: 3D-0107-03) 48" capacity, 43" track center, Head Block spacing 1st to 2nd: 6 ft. 2nd to 3rd: 3 ft. 3rd to 4th: 3 ft. Includes 55' track, Digital Electronic setworks (Setworks program instructions are in sawyer's cab on clip board. Steel support to ground as marked.

271D
Meadows Hyd. Carriage Drive
(Part of Entirety) 50 hp electric motor, no motor controls, includes pump and cable drum assembly. No steel support

271E
Meadows Sawyer's cab
Part of Entirety.  6'x4', A/C and heat. Includes steps and catwalk platform around cab, steel support to the ground.

271F
Roll Case
Part of Entirety.  2' live rolls, 24"x6" in front of sawyers cab, gear motor drive.

271G
Meadows Slab Dump Conveyor
Part of Entiret.12'x24" air operated, steel supports to ground. 

271H
Meadows Deluxe #3 Entirety
Lots 271A-271G with a 10% raise to open the bid. 

271I
McDonough R. H. Band Mill
1st Lot of Entirety. 54", right hand, 7 1/4" face, 1" thickness on top wheel, (sn: 54-EC1563) air strain, hood assist, 54"x 17" slab belt, hydraulic guide.

271J
15 HP Hydraulic Pack
Part of Entirety.  No motor controls, steel base to ground as marked.

271K
75 HP Motor
Part of Entirety. 1775 RPM, 365T frame. Electric.

271L
Siemens SIKO Start 3RW34 75 hp soft start
Part of Entirety. 125 amp disconnect includes the wires to the motor.

271M
(11) Band mill Saw blades
Part of Entirety. (11) Band mill Saw blades - (9) in the sawmill, (2) in the building to left of sawmill. 348"

271N
McDonough Guild Grinder
Part of Entirety. McDonough Gild Grinder - (sn: BDM-1125).

271O
McDonough R. H. Band Mill Entirety
Lots 271I-271N tied together with a 10% raise.

271P
Slab Belt Conveyor
18'x 30', gear reduction drive, steel support to the ground.

271Q
Dust Conveyor
20' Drg Chain Conveyor includes 3' cyclone, steel support

271R
Meadows Slab Belt Conveyor
15'x 24"" with air operated includes a 26"" hold down roll.

271S
Slab Belt Conveyor
Slab Belt Conveyor - 35'x16" with gear motor drive, steel support to the ground.

271T
Meadows Blower
Meadows Blower - 24", 20 hp motor, 10" diameter infeed and outfeed includes Siemons Disconnect.

271U
Cutler Hammer Starters
Cutler Hammer Starters - 15 HP, 20 HP, 50 HP, 1/3 HP.

271V
Lumber Transfer Deck
Lumber Transfer Deck - 5 Strand, 21'x10' with roof top chain, gear reduction drive.

271W
Lumber Transfer Deck
Lumber Transfer Deck - 5 Strand 12'x 10' with roof top chain, 2' 3 strand air lift transfer, gear reduction drive.

271X
Slab Belt Conveyor
Slab Belt Conveyor - 25' x 18" waste conveyor, gear motor drive.

271Y
Catwalk and stairs
Catwalk and stairs - Around the edger to mill. Black in color.

271Z
Lumber Transfer Deck
Lumber Transfer Deck - 35'x8.5' 4 strand with 81X chain, (2) pin operated air stops, gear reduction drive. Steel support to ground.

272
Gravity roll case
Gravity roll case - 9' with 14" rolls.

272A
Vibrating Conveyor
Vibrating Conveyor - 22' long with 18" bottom, 10" flared sides, 28" top.

275
Skate Rolls
2 x 26 1/2" rolls, 5" spacing, (2) 30" x 10', (1) 30" x 4'

276
Skate Rolls
18" x 10'

277
Skate Rolls
2 1/2" x 8 1/2" rolls, 3 1/2" spacing, (3) 12" x 8' sections

278
Material Cart
18" x 9', 12" pan, 15" sides

279
Lumber Cart
44" x 8'6" x 30" high, no wheels

280
Crosby Dbl End Trim Saw
SN: 42096, size: 2-620, 80" x 26' overall, 10 hp electric motor on each head, 20" blades, both heads moveable

281
Pallet Racking
(24) 12' posts, (7) 4' x 12' uprights

282
Lumber Cart
4' x 11' x 40" high, needs miner repair

283
Lumber Cart
4' x 9' x 40" high, missing 2 wheels and 1 upright

284
Lumber Cart
3' x 9', no wheels, missing 1 upright

285
Lumber Rack
54" x 7' x 54" high

286
Lumber Rack
54" x 7' x 54" high

287
Belt Conveyor
66" belt, 7' x 51', no drive

288
Roach Belt Conveyor
SN: 386447, Electric drive, 30" belt, 2" sides, 3' x 17'

290
Hydraulic Oil Tank
275 gallon tank on stand, includes 7' x 7'6" x 10" deep spill containment box

291
Hydraulic Oil Tank
275 gallon tank on stand

292
Hydraulic Oil
(2) 55 gallon barrels, hand pump, 31" x 85" x 10" deep containment box

293
Hydraulic Oil
(2) partial 55 gallon barrels, 31" x 85" x 10" deep containment box

294
Storage Container
92" inside height and width, 8' x 20', includes steel frame under container as well

295
Shelf with Contents
18" x 3' x 8' tall shelf, includes all contents, conduit fittings, electrical parts

296
Bin Organizers with Contents
(2) 12" x 34" x 42" organizers with conduit fittings, 12" x 48" x 18" wooden shelf with electric parts

297
Shelf with Conduit Parts
14" x 60" x 48", includes all contents on and on top of shelf

298
Steel Cabinet with Contents
2' x 6' x 6' tall, greasy fluids, air line, cutting torch leads, mirror, welding wire

299
Self Dumping Hopper
1 1/2 yd., on castors, 3' x 52" x 32" deep

300
Barrel Dolly

301
Shop Cart
20" x 36" x 38" tall, 2 dust pans, 55 gallon barrel of multi-purpose absorbent

302
Steel Cabinet with Contents
2' x 6' x 6', 3 bags of absorbent, bottle of industrial cleaner

303
3 Ton Chain Hoist
Mounted to ceiling beam, includes steel mounting bracket

304
Miller Dialarc 250 AC/DC Welder
SN: KA859746, 200/230/460V, single phase, 103/90/45 amperes, includes leads and welding rods, mounted on steel frame

305
Delta Tablesaw
110V plug in, works as it should, 17" x 26" tabletop, 7" blade

306
Spool Cart
24" x 42" x 52" tall cart with spools of wire and air hose, on castors

307
Pallet of Multi-Purpose Shop Absorbent
Approx. 38 full 40 lbs. bags

308
55 Gallon Barrels
(1) barrel with anti freeze and hand pump, (1) barrel of ATF fluid, (1) barrel of AW46 hydraulic oil, (2) empty barrels, 52" x 52" x 8" deep spill containment pallet

309
Cutting Torch Set
Includes cart, tanks, gauges, leads, and torch

310
Acetylene Tank
Empty

311
Acetylene Tank
Empty

312
Acetylene Tank
Empty

313
Acetylene Tank
Empty

314
Acetylene Tank
Empty

315
Oxygen Tank
Empty

316
Oxygen Tank
Empty

317
Jet Metal Cutting Band Saw
110V plug in, includes roller stand

318
Steel Workbench
32" x 8" x 3' tall, 5" bench vise, includes all contents, bearings sprockets, gear chain, hydraulic pump, c-clamp

319
Underlayment Paper
10' wide roll, length unknown, used for flower beds, etc.

320
Wood Stove
Shop made out of (2) 55 gallon drums, includes stove-pipe, charcoal grill

321
Bin Organizers
16' x 20' x 4' tall, sliding shelves with assorted parts and hardware, includes stand of assorted threaded rods

322
Fans
(4) 30" fans, 3 on stands, 1 for wall mount

323
CM 2 Ton Chain Hoist
SN: PI-8, Series 622

324
Table with Contents
38" x 75" x 38" tall, hand tools, C-clamps, O-rings, bearings, key stock, hose repair kit

325
Steel Cabinet
2' x 6' x 6'

326
Pipe Benders
(1) up to 1" pipe, 4' handle, (1) up to 1 1/2" pipe, 54" handle

327
Daytona Floor Jack
Approx. 2 ton rating

328
Wheelbarrow and Brooms
2 brooms

329
Vevor Jack Stands
Adjustable and collapsible, 4 pieces

330
Pallet of Tools
Fuel jugs, jackstands, battery charger, hole saw set, Milwaukee hammer drill, 7" angle grinder

331
Pallet of Belt Lacing
Flexco lacing, alligator lacing tool, (2) roller lacer tools

332
New Chain
9 boxes of 81XR chain, 10' per box

333
New Chain
3 boxes of Ansi 140 RIV Lynx HD chain, 10' per box

334
New Chain
4 boxes of 100R chain, 10' per box

335
New Chain
1 box of 80R chain, 1 box of 803RX, 1 box of 50-1RV, 10' per box

336
Hose Reels
1 reel with air hose, 1 reel with extension cord

337
Desk Supplies
Office Desk and chair and contents, hard hat, 1st aid kit

338
Miller CP-300 Wire Welder
SN: JH172444, 200/230/460V, 3 phase, Miller R-115 Wire Feeder, includes leads, gun, and tanks, mounted on cart with castors

339
Steel Saw Horses
4' x 20" tall

340
Shelf with All Contents
2' x 4' x 78" tall shelf, bearings, planer wheels, lumber cart wheels, torch gauges, hand tools

341
Steel Table with All Contents
3' x 54" x 3" tall, 5" Columbian Bench vise, assorted chain parts

342
Hose Reel
Includes air hose

343
Lincoln Idealarc 250 Welder
Model: Tig 250, SN: AC-528233, 208/230/460V, includes mask and leads, mounted on cart with castors

344
Dry Rod II Electrode Oven
120/230V

345
Planer Wheels
All new wheels, 30 pieces, fit lot 164

346
Planer Parts
Lots of new parts, gearboxes, bearings, housings, chain. Fits lot 164.

347
Pallet of Parts
25 hp, 284T frame, 460V, 1760 rpm, electric motor, assorted pipe fittings, metal cut off saw, metal clamps

348
Steel Table
4' x 82" x 40" tall, on castors, 5" bench vise, pipe clamps, dust pipe fittings

349
Westward 20 Ton Shop Press
Model: 1MZJ6

350
Nesco 8" Bench Grinder
110V plug in, mounted to steel frame with fork pockets

351
Powermatic 1150A Drill Press
SN: 95158108, 110V plug in

352
Shelf with Contents
18" x 3' x 7' tall, lots of welding supplies

353
Steel Cabinet
2' x 5' x 7' tall, chain, welding wire

354
Shelf with Parts
20" x 5' x 4' tall, (3) brand new WEG 3 hp motors, air line parts, gearbox

355
Bolt Bin Organizers
(1) 16" x 20" x 5', (1) 12" x 34" x 30", includes all contents

356
Bolt Bin Organizers
16' x 28' x 7' wooden shelf, battery charger, includes all contents

357
Bolt Bin Organizers
12" x 34" x 65" tall, includes all contents

358
Bolt Bin Organizers
12" x 34" x 65" tall, includes all contents

359
Bolt Bin Organizers
12" x 34" x 65" tall, includes all contents

360
Bolt Bin Organizers
12" x 34" x 70" tall, includes all contents

361
2005 Quincy QSI-370 Air Compressor
SN: UN053678, meter reads: 27,542 hours, uninstalled 75 hp electric motor

362
10" Fan Blower
10" inlet, 7 1/2" x 10" outlet, electric drive

363
Pallet of Electric Panels
(3) control panels

364
Pallet of Aluminum Jig Parts

365
Pallet of Electric Boxes
Panels, conduit boxes, cutoffs, starters

366
Pallet of Misc.
GreCon Control panel, 30" fan

367
Hoffman Electrical Control Station

368
DeWalt Radial Arm Saw
Model: 3251, SN: 62170117, electric drive, 12" blade, 3' x 4' x 6' tall

369
Pallet of Electrical Boxes

370
2006 Holtec Pack Saw
Model: Transcut II, SN: 05334, no bar, electric drive

371
NYB 18" Dust Blower
16" inlet, 12" x 18" outlet, electric drive

372
Pallet of Electrical Panels
Also includes roller and steel clips

373
Water Pump Unit
Electric drive, 28" x 28" x 44" tall

374
Hevi-Duty Transformer
3 phase, 120CT/240D to 480D

375
Pallet of Electrical Parts
Breakers and switches

376
Electric Motor on Stand
7.5 hp, 1745 rpm, 230/460V

377
Pallet of Misc.
Belts, first aid kit, grease gun

378
GE Transformer
3 phase, 480V-575V, cut off boxes

379
Pallet of Electrical Boxes

380
Pallet of Electrical Boxes

381
Jesco 1/2 Yard Self Dumping Hopper
2000 lbs. capacity

382
1 Yard Self Dumping Hopper
On castors

383
Jesco 1/2 Yard Self Dumping Hopper
2000 lbs. capacity

384
Saw Blades
10-20" blades, used, some sharpened

385
Pallet of Bearings, Sprockets, and Parts

386
Pallet of Assorted Lights

387
Pallet of Assorted Lights

388
Pallet of Parts
Planer wheels, feed chain parts

389
Pallet of Electrical Parts

390
Pallet of Parts
Sprockets, water pump, electric components, chain, saw blades, control panel

391
Pallet of Electrical Parts

392
Pallet of Electrical Parts

393
Pallet of Electrical Parts

394
Pallet of Misc.
Belts, fuses, water heater, chain pulleys, 9'6" extension ladder

395
Pallet of Misc.
Fittings, valves, blades, poly blocks

396
Pallet of Electric Motors
8 new motors (1-3 KW), assorted deck chain

397
Pallet of Poly Strips