ABSOLUTE AUCTION OF MOSS SAWMILL
Previous Page Listing ID#: 1545816

Auction Location

MOSS, TN 38575
Auction Dates and TimesSALE IS COMPLETED
Saturday Nov 11, 2023 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Tri-State Auction & Realty, LLC

Website: tristate-auction.com

GoToAuction.com ID#: 5821
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
WE DO ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 423-201-9441 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption CERTIFICATE from your state. NOTE: Some states do not accept out of state direct pay permits.
Listing Information

ABSOLUTE AUCTION OF

MOSS SAWMILL

9970 CLAY COUNTY HWY

MOSS TN 38575

SATURDAY NOVEMBER 11, 2023

9AM CST

TN LIC # 5120

MILL #1

 

·         MORBARK ROSSER HEAD DEBARKER W/100HP MOTOR W/20’ MORBARK ENDWISE LOG TROUGH W/LADDER BACK CHAIN W/HYDRAULIC DRIVE W/20’ ENDWISE LOG TROUGH W/DOUBLE 3 ARM 2 WAY KICKERS

·         MORBARK 40’ OUTFEED ENDWISE LOG TROUGH W/2 WAY KICKERS W/HYDRAULIC DRIVE W/MORBARK 4’ X 5’ CONTROLS CAB

·         MORBARK 40’ 3 STRAND HEAVY DUTY LOG DECK W/4ARM STOP & LOADER W/ELECTRIC DRIVE

·         70’ ALL STEEL INCLINE WASTE CONVEYORR W/110 LADDERBACK CHAIN W/DRIVE

·         CUSTOM BUILT 40’ 3 STRAND INFEED LOG DECK W/#78 CHAIN W/4 ARM STOP & LOADER W/DRIVE

·         MCDONOUGH MODEL 72MA SLANTED BAND HEAD RIG W/AIR STRAIN W/HYD HOLD DOWN W/OFF BEARING BELT SN# 525-FR

·         CORLEY 11’ AIR OPERATED SLAB DROP W/CONTROLS W/CANT CATCHERS

·         CORLEY 3 HEAD BLOCK SLANTED LINEAR POSITTION CARRIAGE W/LINEAR SCAN COMPUTERIZED SCANNER SYSTEM W/CORLEY 35’ 4 STRAND HEAVY DUTY LOG DECK W/STOP & LOADER W/DRIVE

·         CORLEY 28” X 60’ HEAVY DUTY ROLLCASE W/8” ROLLS

·         12’ 4 STRAND POP UP TRANSFER W/#78 CHAIN W/BOARD STOP & DRIVE

·         WEVSTER 24” X 44’ VIBRATING CONVEYOR W/DRIVE

·         PRECISION 18” X 95’ VIBRATING CONVYOR W/DRIVE

·         CORLEY 385 SMAC TWIN HYDRAULIC SHOTGUN FEED W/(2) 150HP MOTORS

·         46” SUCTION BLOWER W/APPROX. 50HP MOTOR W/STAND

·         RECKHART MODEL R642 2 SAW EDGER W/2 MOVABLE SAWS W/INFEED ROLLCASE W/16’ SINGLE BELT TAILING OUTFEED SN# 083 W/2 LINE LAZER LITE W/60HP MOTOR

·         CORLEY 40’ 4 STRAND COLLECTOR DECK W/ROOFTOP CHAIN W/DRIVE

 

MILL #2

·         TYRONE BERRY SMA MODEL 280C HYDRAULIC SHOTGUN FEED W/150HP MOTOR

·         GARDNER DENVER 60HP SCREW TYPE AIR COMPRESSOR

·         GARDNER DENVER 50HP SCREW TYPE AIR COMPRESSOR

·         SERING BAR TYPE LOG TURNER W/50HP HYDRAULIC POWER PACK

·         CORLEY 36’ 3 STRAND HEAVY DUTY LOG DECK W/STOP & LOADER W/NOSE SKIDS

·         CLEEREMAN 2 HEAD BLOCK LINEAR POSTION CARRIAGE W/ON BOARD TURNERS W/TRACKWAY & PANTAGRAPH

·         CLEEREMAN 4’ X 6’ CONTROL CAB W/COMPUTER SETWORKS

·         SALEM 6’ BAND HEAD RIG W/SLAT BED W/WEIGHT STRAIN W/CORLEY AIR OPERATED SLAB DROP

·         CORLEY 22’ 4 STRAND COLLECTOR DECK W/81X CHAIN

·         CORLEY 24” X 80’ HEAVY DUTY ROLLCASE W/10” ROLLS W/SLAB DUMP W/DRIVE

·         10’ 4 STRAND TRASFER DECK W/CANT STOPS

·         24” X 40’ ROLLCASE W/4” ROLLS W/DRIVE

·         20’  3 STRAND COLLECTOR DECK W/#78 CHAIN W/DRIVE

·         40’ 4 STRAND COLLECTOR DECK W/130 ROOFTOP CHAIN W/DRIVE

·         COOK 6 X 36 2 SAW EDGER W/2 MOVABLE SAWS W/60HP MOTOR W/INFEED ROLLCASE W/18’ SINGLE BELT TAILING OUTFEED

·         7’ LETSON &BUREE BAND LINE BAR RESAW W/MCDONOUGH LINE BAR SYSTEM W/OUTFEED ROLLCASE W/SEPERATOR W/INFEED ROLLCASE W/CANT POSTITIONER & TURNER W/50HP HYDRAULIC POWER PACK SYSTEM W/CONTROLS

·         40HP HYDRAULIC POWER PACK W/LOG TURNER

·         24” X 20’ RETURN BELT W/DRIVE

·         MCDONOUGH 24” X 15’ HEAVY DUTY ROLLCASE W/10” ROLLS W/DRIVE

·         CORLEY 12’ 4 STRAND TRANSFER DECK W/DRIVE

·         CUSTOM BUILT 20’ 5 STRAND TRANSFER W/81X CHAIN W/DRIVE

·         CORLEY 32’ 4 STRAND TRANSFER DECK W/#78 CHAIN W/BOARD STOPS  W/DRIVE

·         APPROX 1000 GALLON AIR STORAGE TANK

·         AIRTEC MODEL TW250 AIR DRYING SYSTEM

 

 

TRIMMER & SORTER LINE

 

·         CORLEY 6 STRAND UNSCRAMBLER

·         25’ 4 STRAND TRANSFER DECK W/HEAVY 81X CHAIN W/6 STRAND UNSCRAMBLER

·         IRVINGTON MOORE 20’ DROP SAW TRIMMER W/INFEED TRANSFER W/LUG SYSTEM W/EVEN END ROLLS W/DOARD DEALER

·         6’ INFEED 6 STRAND INFEED TRANSFER W/BOARD DEALING SYSTEM W/GRADING POCKET W/OUTFEED TRANSFER W/LUG SYSTEM W/EVEN END ROLLS W/MOTORS & CONTROLS

·         16 BAY BIN SORTER

·         24” X 24’ TRANSFER W/DRIVE

·         APPROX 2000 GALLON AIR STROAGE TANK

·         PIONEER AIR DRYING SYSTEM

·         PHELPS 24” SINGLE TRAILER LOADING SYTEM W/25HP MOTOR

·         20” X 12’ INCLINE BELT CONVEYOR

·         PRECISION 66” 6 KNIFE CHIPPER W/HORIZONTAL FEED- TOP DISCHARGE

·         W/200 HP MOTOR SN# 1119

·         SODERHAM 7’ X 7’ CHIP SCREEN W/COLLECTOR

·         20’ 3 STRAND TRANSFER DECK W/81X CHAIN W/DRIVE

·         10’ 4 STRAND COLLECTOR DECK W/130 ROOFTOP CHAIN W/DRIVE

·         40” X 14’ ROLLCASE W/DRIVE

·         FULGHUM 8’ X 8’ CHIP SCREEN W/COLLECTOR

·         PRECISION 66” 6 KNIFE CHIPPER W/HORIZONTAL FEED- TOP DISCHARGE W/200HP MOTOR SN# 3032

·         WEBSTER 24” X 28’ HEAVY DUTY VIBRATING CONVEYOR W/TRANSITION SPOUT W/FIBERGLASS SECTION W/MDI METAL DETECTOR

·         WEBSTER 18” X 46’ VIBRATING CONVEYOR W/DRIVE

·         MORBARK 42” OSCILLATING LOADING & LEVELING SYSTEM W/30HP MOTOR

·         MORBARK 24” X 10’ INCLINE BELT CONVEYOR W/DRIVE

·         ALL STEEL WASTE CONVEYOR INCLINE W/25’ STEEL DRAGS

·         45’ DUAL AUGER LOADING & LEVELING SYSTEM

 

NOT INSTALLED

 

FULGHUM 60” 6 KNIFE CHIPPER W/HORIZONTAL FEED – TOP DISCHARGE

 

FILING ROOM

-(2) SIMONDS AUTOMATIC BAND SAW LEVELERS

-(2) ARMSTRONG #4 RH BAND SAW SHARPENER

-(2) ARMSTRONG #4 LH BAND SAW SHARPENER

-HATCHETT TABLE TYPE KNIFE SHARPENER

-(3) SETS OF HAMMERING BLOCKS

-WORK TABLES

-STRETCHER ROLLS

-TOOLING

 

Trucks

-1995 Ford F800 Flat Bed Dump, Cummins Engine, Auto, AC Mileage 373504.9:  VIN FOXF80E75VA60141

-1994 Chevy Bus, 5.7 Liter, Auto, Mileage 040058: VIN 1GBHG31K2RF152960 (Rebuilt Title)

-1973 GMC 6000, 350 Engine, Manual Transmission, Dump Bed: VIN TCE61TV560054- Does not run, has a bad engine

-2004 Chevy Colorado LS, 3.5 Liter Engine, Auto Transmission, Mileage 193904: VIN 1GCDS196048143806 (Rebuilt Title)

-2003 Dodge Dakota SXT, V6 Auto, 4x4, Mileage 111095: VIN 1D7HG12X03536998 (Rebuilt Title)

-1997 Ford F350 XL, 351 Engine, Auto, Service Bed, Mileage 85573: VIN 1FDKF37H4VEC5437

-1993 Chevy 2500, 5.7 Auto, Service Bed, Mileage 185620: VIN 1GCFC24KXP223029

Tractors

-2009 Freightliner Detroit Series 60 14 Liter 10 Speed: VIN 1FUALC49DAG6001

-2016 T880 Kenworth Cummins ISx15, 18 speed, Mileage 448413: VIN 1XKZD40X1GJ483457

-1993 International Cat engine 3406, 9 Speed, Log bed, AC, Mileage 5571700: VIN 2HSFELUR9HC069950

-1992 Peterbilt 357, Cat engine, 10 Speed, Log bed: VIN 1XPAD69X0ND323233

-2000 Freightliner Classic, Detroit Series 60, 12 Liter, 10 Speed, Wet line kit, Mileage 137627: VIN 1FUPFSZBTYLB59004

-1996 Peterbilt 377, N-14 Cummins, Wet line kit, Mileage 533485: VIN 1XPCD69X-XID395546

-International Daystar 5000, 4 wheel drive, Cummins N-14, 9 speed with dump bed, Mileage 871843: VIN TC062604

-2003 Tico Terminal Truck, 5.9 Cummins, Auto, AC and Heat, Hyd 5th wheel, 25291 Hours: VIN 118A6VTA653380

-1996 Mack Elite CL with Mack Engine, 18 Speed, 3 axles with 2 deck log bed, Mileage 111548: VIN 1M2AD62C0TW004145

2008 Chevrolet 2500 4x4 6.0 Allison Trans 260,xxx miles

2005 jeep TJ 4.0 6 speed 4x4 132,000 miles

2007 Ford F150 5.4 4x4 Automatic Trans 212,xxx miles

Trailers

-1991 Fruehauf 2 deck log trailer, black in color: VIN 1H2V04824MB04898

-1990 Homemade 2 deck log trailer, red in color: VIN TNVIN211201438001

-1969 Phelps  Lowboy, Tandem Axle, Ramps: Tag Number T115721

-2004 10 ft wide Lowboy, Hydraulic ramps, Tandem Axle. Made by Savannah Machine Shop Loader Company: VIN 1S9E0472545174555

-1983 Dorsey Chip Trailer, 45 ft., swing gate closed top,: VIN 1DTU22W23DA159896

-1978 Fruehauf Chip Trailer, 45 ft, swing gate, closed top: VIN MAZ567515

-1975 Fruehauf Chip Trailer, 45 ft, swing gate, closed top: VIN MAW484009

-1987 Fruehauf Chip Trailer, Swing gate, closed top: VIN 1HZ04524BC012421

-1981 Dorsey Chip Trailer, 45 ft, Swing gate, closed top: VIN 1DTV22W298W010411

-1987 Trail Mobile Chip Trailer, 45 ft, Swing gate, closed top: VIN 1PT011AJ1G9001691

-1983 Aztec 2 deck log trailer: VIN A789

-1983 Aztec 3 deck log trailer: VIN 1AZBR3A11D1013691

-1991 Utility 45 Ft Flat Bed Trailer: VIN 1UYFS2484NA694601

-2002 Homemade 2 deck log trailer: Plate Number TN 516430

-1998 Transcraft 48 ft Flat Bed Trailer, 96 inch wide with toolbox: VIN 1TTF48204W2001325

-1995 Homemade 2 deck log trailer: VIN TNCVEDV03102151DA

-2005 Homemade Red 3 Deck Log Trailer: VIN TNCVEDV03102150BA

 

Loaders

-Seelick TMF-55, 3 wheel loader, Deutz  engine air cool: VIN 548531155320- Does run but has a Bad Engine

-Toyota Forklift, Short Mask, Runs but knocks: VIN 5FG25

-Volvo 70 E Bucket Loader, Engine fire: VIN L70EV60575

-2007 Case 430 Skid Steer, Bucket and Forks, Foam filled tires: VIN N6M442007

-2008 70 Kawaski zV Loader with Log forks, AC, 12083 hours: VIN 70C5-5196

-2015 65 Kawaski TMV Loader with bucket and forks, AC, 17678 Hours: VIN 65J4-4238

HITACHI 180 ARTICULATING WHEEL LOADER W/QUICK ATTACH W/FORKS W/ENCLOSED CAB W/7500 HOURS

HITACHI 150 ARTICULATING WHEEL LOADER W/QUICK ATTACH W/FORKS W/ENCLOSED CAB W/9000 HOURS

Bobcat E50 Mini- Excavator w/1,145 hours

 

Skidders and Knucklebooms

-410E STATIONARY KB LOADER CONT GRAPPLE, W/ JOYSTICK CONTROLS W/ 100HP ELECTRIC MOTOR LOCATED IN CROSSVILLE, TN

-PRENTICE 410E KNUCKLEBOOM LOADER W/ SAW PACKAGE HOOP UP W/ CONT GRAPPLE W/ JOYSTICK CONTROLS MOUNTED ON TANDEM AXLE TRAILER LOCATED IN CROSSVILLE, TN

-(2) 648G D-A GRAPPLE SKIDDERS

-648G SINGLE ARCH GRAPPLE SKIDDER

-CTR Buck Saw

-410 E Prentice Knuckleboom, 5.9 Cummins

-CTR Buck Saw

-CTR De-limber Model 426

 

MISC

-Nightlight NL 5000, light tower on trailer, does not run: VIN 0600947

-Wacker Neuson LTN6, light tower on trailer, does not run: VIN 5XFLN0518CN005692


Auction License: JAMES SAVAGE LIC #5120
Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Nov 23
FINGER , TN



Sponsored Links

ABSOLUTE AUCTION OF MOSS SAWMILL

Tri-State Auction & Realty, LLC

Tri-State Auction & Realty, LLC


Contact:
Phone:
Sale Location
9970 CLAY COUNTY HWY 9970 CLAY COUNTY HWY
MOSS, TN 38575
Sale Dates and Times
Saturday Nov 11, 2023 Completed
Sale Terms and Conditions
WE DO ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 423-201-9441 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption CERTIFICATE from your state. NOTE: Some states do not accept out of state direct pay permits.
Listing Details

ABSOLUTE AUCTION OF

MOSS SAWMILL

9970 CLAY COUNTY HWY

MOSS TN 38575

SATURDAY NOVEMBER 11, 2023

9AM CST

TN LIC # 5120

MILL #1

 

·         MORBARK ROSSER HEAD DEBARKER W/100HP MOTOR W/20’ MORBARK ENDWISE LOG TROUGH W/LADDER BACK CHAIN W/HYDRAULIC DRIVE W/20’ ENDWISE LOG TROUGH W/DOUBLE 3 ARM 2 WAY KICKERS

·         MORBARK 40’ OUTFEED ENDWISE LOG TROUGH W/2 WAY KICKERS W/HYDRAULIC DRIVE W/MORBARK 4’ X 5’ CONTROLS CAB

·         MORBARK 40’ 3 STRAND HEAVY DUTY LOG DECK W/4ARM STOP & LOADER W/ELECTRIC DRIVE

·         70’ ALL STEEL INCLINE WASTE CONVEYORR W/110 LADDERBACK CHAIN W/DRIVE

·         CUSTOM BUILT 40’ 3 STRAND INFEED LOG DECK W/#78 CHAIN W/4 ARM STOP & LOADER W/DRIVE

·         MCDONOUGH MODEL 72MA SLANTED BAND HEAD RIG W/AIR STRAIN W/HYD HOLD DOWN W/OFF BEARING BELT SN# 525-FR

·         CORLEY 11’ AIR OPERATED SLAB DROP W/CONTROLS W/CANT CATCHERS

·         CORLEY 3 HEAD BLOCK SLANTED LINEAR POSITTION CARRIAGE W/LINEAR SCAN COMPUTERIZED SCANNER SYSTEM W/CORLEY 35’ 4 STRAND HEAVY DUTY LOG DECK W/STOP & LOADER W/DRIVE

·         CORLEY 28” X 60’ HEAVY DUTY ROLLCASE W/8” ROLLS

·         12’ 4 STRAND POP UP TRANSFER W/#78 CHAIN W/BOARD STOP & DRIVE

·         WEVSTER 24” X 44’ VIBRATING CONVEYOR W/DRIVE

·         PRECISION 18” X 95’ VIBRATING CONVYOR W/DRIVE

·         CORLEY 385 SMAC TWIN HYDRAULIC SHOTGUN FEED W/(2) 150HP MOTORS

·         46” SUCTION BLOWER W/APPROX. 50HP MOTOR W/STAND

·         RECKHART MODEL R642 2 SAW EDGER W/2 MOVABLE SAWS W/INFEED ROLLCASE W/16’ SINGLE BELT TAILING OUTFEED SN# 083 W/2 LINE LAZER LITE W/60HP MOTOR

·         CORLEY 40’ 4 STRAND COLLECTOR DECK W/ROOFTOP CHAIN W/DRIVE

 

MILL #2

·         TYRONE BERRY SMA MODEL 280C HYDRAULIC SHOTGUN FEED W/150HP MOTOR

·         GARDNER DENVER 60HP SCREW TYPE AIR COMPRESSOR

·         GARDNER DENVER 50HP SCREW TYPE AIR COMPRESSOR

·         SERING BAR TYPE LOG TURNER W/50HP HYDRAULIC POWER PACK

·         CORLEY 36’ 3 STRAND HEAVY DUTY LOG DECK W/STOP & LOADER W/NOSE SKIDS

·         CLEEREMAN 2 HEAD BLOCK LINEAR POSTION CARRIAGE W/ON BOARD TURNERS W/TRACKWAY & PANTAGRAPH

·         CLEEREMAN 4’ X 6’ CONTROL CAB W/COMPUTER SETWORKS

·         SALEM 6’ BAND HEAD RIG W/SLAT BED W/WEIGHT STRAIN W/CORLEY AIR OPERATED SLAB DROP

·         CORLEY 22’ 4 STRAND COLLECTOR DECK W/81X CHAIN

·         CORLEY 24” X 80’ HEAVY DUTY ROLLCASE W/10” ROLLS W/SLAB DUMP W/DRIVE

·         10’ 4 STRAND TRASFER DECK W/CANT STOPS

·         24” X 40’ ROLLCASE W/4” ROLLS W/DRIVE

·         20’  3 STRAND COLLECTOR DECK W/#78 CHAIN W/DRIVE

·         40’ 4 STRAND COLLECTOR DECK W/130 ROOFTOP CHAIN W/DRIVE

·         COOK 6 X 36 2 SAW EDGER W/2 MOVABLE SAWS W/60HP MOTOR W/INFEED ROLLCASE W/18’ SINGLE BELT TAILING OUTFEED

·         7’ LETSON &BUREE BAND LINE BAR RESAW W/MCDONOUGH LINE BAR SYSTEM W/OUTFEED ROLLCASE W/SEPERATOR W/INFEED ROLLCASE W/CANT POSTITIONER & TURNER W/50HP HYDRAULIC POWER PACK SYSTEM W/CONTROLS

·         40HP HYDRAULIC POWER PACK W/LOG TURNER

·         24” X 20’ RETURN BELT W/DRIVE

·         MCDONOUGH 24” X 15’ HEAVY DUTY ROLLCASE W/10” ROLLS W/DRIVE

·         CORLEY 12’ 4 STRAND TRANSFER DECK W/DRIVE

·         CUSTOM BUILT 20’ 5 STRAND TRANSFER W/81X CHAIN W/DRIVE

·         CORLEY 32’ 4 STRAND TRANSFER DECK W/#78 CHAIN W/BOARD STOPS  W/DRIVE

·         APPROX 1000 GALLON AIR STORAGE TANK

·         AIRTEC MODEL TW250 AIR DRYING SYSTEM

 

 

TRIMMER & SORTER LINE

 

·         CORLEY 6 STRAND UNSCRAMBLER

·         25’ 4 STRAND TRANSFER DECK W/HEAVY 81X CHAIN W/6 STRAND UNSCRAMBLER

·         IRVINGTON MOORE 20’ DROP SAW TRIMMER W/INFEED TRANSFER W/LUG SYSTEM W/EVEN END ROLLS W/DOARD DEALER

·         6’ INFEED 6 STRAND INFEED TRANSFER W/BOARD DEALING SYSTEM W/GRADING POCKET W/OUTFEED TRANSFER W/LUG SYSTEM W/EVEN END ROLLS W/MOTORS & CONTROLS

·         16 BAY BIN SORTER

·         24” X 24’ TRANSFER W/DRIVE

·         APPROX 2000 GALLON AIR STROAGE TANK

·         PIONEER AIR DRYING SYSTEM

·         PHELPS 24” SINGLE TRAILER LOADING SYTEM W/25HP MOTOR

·         20” X 12’ INCLINE BELT CONVEYOR

·         PRECISION 66” 6 KNIFE CHIPPER W/HORIZONTAL FEED- TOP DISCHARGE

·         W/200 HP MOTOR SN# 1119

·         SODERHAM 7’ X 7’ CHIP SCREEN W/COLLECTOR

·         20’ 3 STRAND TRANSFER DECK W/81X CHAIN W/DRIVE

·         10’ 4 STRAND COLLECTOR DECK W/130 ROOFTOP CHAIN W/DRIVE

·         40” X 14’ ROLLCASE W/DRIVE

·         FULGHUM 8’ X 8’ CHIP SCREEN W/COLLECTOR

·         PRECISION 66” 6 KNIFE CHIPPER W/HORIZONTAL FEED- TOP DISCHARGE W/200HP MOTOR SN# 3032

·         WEBSTER 24” X 28’ HEAVY DUTY VIBRATING CONVEYOR W/TRANSITION SPOUT W/FIBERGLASS SECTION W/MDI METAL DETECTOR

·         WEBSTER 18” X 46’ VIBRATING CONVEYOR W/DRIVE

·         MORBARK 42” OSCILLATING LOADING & LEVELING SYSTEM W/30HP MOTOR

·         MORBARK 24” X 10’ INCLINE BELT CONVEYOR W/DRIVE

·         ALL STEEL WASTE CONVEYOR INCLINE W/25’ STEEL DRAGS

·         45’ DUAL AUGER LOADING & LEVELING SYSTEM

 

NOT INSTALLED

 

FULGHUM 60” 6 KNIFE CHIPPER W/HORIZONTAL FEED – TOP DISCHARGE

 

FILING ROOM

-(2) SIMONDS AUTOMATIC BAND SAW LEVELERS

-(2) ARMSTRONG #4 RH BAND SAW SHARPENER

-(2) ARMSTRONG #4 LH BAND SAW SHARPENER

-HATCHETT TABLE TYPE KNIFE SHARPENER

-(3) SETS OF HAMMERING BLOCKS

-WORK TABLES

-STRETCHER ROLLS

-TOOLING

 

Trucks

-1995 Ford F800 Flat Bed Dump, Cummins Engine, Auto, AC Mileage 373504.9:  VIN FOXF80E75VA60141

-1994 Chevy Bus, 5.7 Liter, Auto, Mileage 040058: VIN 1GBHG31K2RF152960 (Rebuilt Title)

-1973 GMC 6000, 350 Engine, Manual Transmission, Dump Bed: VIN TCE61TV560054- Does not run, has a bad engine

-2004 Chevy Colorado LS, 3.5 Liter Engine, Auto Transmission, Mileage 193904: VIN 1GCDS196048143806 (Rebuilt Title)

-2003 Dodge Dakota SXT, V6 Auto, 4x4, Mileage 111095: VIN 1D7HG12X03536998 (Rebuilt Title)

-1997 Ford F350 XL, 351 Engine, Auto, Service Bed, Mileage 85573: VIN 1FDKF37H4VEC5437

-1993 Chevy 2500, 5.7 Auto, Service Bed, Mileage 185620: VIN 1GCFC24KXP223029

Tractors

-2009 Freightliner Detroit Series 60 14 Liter 10 Speed: VIN 1FUALC49DAG6001

-2016 T880 Kenworth Cummins ISx15, 18 speed, Mileage 448413: VIN 1XKZD40X1GJ483457

-1993 International Cat engine 3406, 9 Speed, Log bed, AC, Mileage 5571700: VIN 2HSFELUR9HC069950

-1992 Peterbilt 357, Cat engine, 10 Speed, Log bed: VIN 1XPAD69X0ND323233

-2000 Freightliner Classic, Detroit Series 60, 12 Liter, 10 Speed, Wet line kit, Mileage 137627: VIN 1FUPFSZBTYLB59004

-1996 Peterbilt 377, N-14 Cummins, Wet line kit, Mileage 533485: VIN 1XPCD69X-XID395546

-International Daystar 5000, 4 wheel drive, Cummins N-14, 9 speed with dump bed, Mileage 871843: VIN TC062604

-2003 Tico Terminal Truck, 5.9 Cummins, Auto, AC and Heat, Hyd 5th wheel, 25291 Hours: VIN 118A6VTA653380

-1996 Mack Elite CL with Mack Engine, 18 Speed, 3 axles with 2 deck log bed, Mileage 111548: VIN 1M2AD62C0TW004145

2008 Chevrolet 2500 4x4 6.0 Allison Trans 260,xxx miles

2005 jeep TJ 4.0 6 speed 4x4 132,000 miles

2007 Ford F150 5.4 4x4 Automatic Trans 212,xxx miles

Trailers

-1991 Fruehauf 2 deck log trailer, black in color: VIN 1H2V04824MB04898

-1990 Homemade 2 deck log trailer, red in color: VIN TNVIN211201438001

-1969 Phelps  Lowboy, Tandem Axle, Ramps: Tag Number T115721

-2004 10 ft wide Lowboy, Hydraulic ramps, Tandem Axle. Made by Savannah Machine Shop Loader Company: VIN 1S9E0472545174555

-1983 Dorsey Chip Trailer, 45 ft., swing gate closed top,: VIN 1DTU22W23DA159896

-1978 Fruehauf Chip Trailer, 45 ft, swing gate, closed top: VIN MAZ567515

-1975 Fruehauf Chip Trailer, 45 ft, swing gate, closed top: VIN MAW484009

-1987 Fruehauf Chip Trailer, Swing gate, closed top: VIN 1HZ04524BC012421

-1981 Dorsey Chip Trailer, 45 ft, Swing gate, closed top: VIN 1DTV22W298W010411

-1987 Trail Mobile Chip Trailer, 45 ft, Swing gate, closed top: VIN 1PT011AJ1G9001691

-1983 Aztec 2 deck log trailer: VIN A789

-1983 Aztec 3 deck log trailer: VIN 1AZBR3A11D1013691

-1991 Utility 45 Ft Flat Bed Trailer: VIN 1UYFS2484NA694601

-2002 Homemade 2 deck log trailer: Plate Number TN 516430

-1998 Transcraft 48 ft Flat Bed Trailer, 96 inch wide with toolbox: VIN 1TTF48204W2001325

-1995 Homemade 2 deck log trailer: VIN TNCVEDV03102151DA

-2005 Homemade Red 3 Deck Log Trailer: VIN TNCVEDV03102150BA

 

Loaders

-Seelick TMF-55, 3 wheel loader, Deutz  engine air cool: VIN 548531155320- Does run but has a Bad Engine

-Toyota Forklift, Short Mask, Runs but knocks: VIN 5FG25

-Volvo 70 E Bucket Loader, Engine fire: VIN L70EV60575

-2007 Case 430 Skid Steer, Bucket and Forks, Foam filled tires: VIN N6M442007

-2008 70 Kawaski zV Loader with Log forks, AC, 12083 hours: VIN 70C5-5196

-2015 65 Kawaski TMV Loader with bucket and forks, AC, 17678 Hours: VIN 65J4-4238

HITACHI 180 ARTICULATING WHEEL LOADER W/QUICK ATTACH W/FORKS W/ENCLOSED CAB W/7500 HOURS

HITACHI 150 ARTICULATING WHEEL LOADER W/QUICK ATTACH W/FORKS W/ENCLOSED CAB W/9000 HOURS

Bobcat E50 Mini- Excavator w/1,145 hours

 

Skidders and Knucklebooms

-410E STATIONARY KB LOADER CONT GRAPPLE, W/ JOYSTICK CONTROLS W/ 100HP ELECTRIC MOTOR LOCATED IN CROSSVILLE, TN

-PRENTICE 410E KNUCKLEBOOM LOADER W/ SAW PACKAGE HOOP UP W/ CONT GRAPPLE W/ JOYSTICK CONTROLS MOUNTED ON TANDEM AXLE TRAILER LOCATED IN CROSSVILLE, TN

-(2) 648G D-A GRAPPLE SKIDDERS

-648G SINGLE ARCH GRAPPLE SKIDDER

-CTR Buck Saw

-410 E Prentice Knuckleboom, 5.9 Cummins

-CTR Buck Saw

-CTR De-limber Model 426

 

MISC

-Nightlight NL 5000, light tower on trailer, does not run: VIN 0600947

-Wacker Neuson LTN6, light tower on trailer, does not run: VIN 5XFLN0518CN005692

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
ABSOLUTE AUCTION OF MOSS SAWMILL
 Live Auction w/Online Bidding
Auction Date(s)
Saturday Nov 11, 2023 Completed
Auction Location

MOSS, TN 38575
Company
Tri-State Auction & Realty, LLC

Website: tristate-auction.com

Listing Terms and Conditions
WE DO ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 423-201-9441 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption CERTIFICATE from your state. NOTE: Some states do not accept out of state direct pay permits.

ABSOLUTE AUCTION OF

MOSS SAWMILL

9970 CLAY COUNTY HWY

MOSS TN 38575

SATURDAY NOVEMBER 11, 2023

9AM CST

TN LIC # 5120

MILL #1

 

·         MORBARK ROSSER HEAD DEBARKER W/100HP MOTOR W/20’ MORBARK ENDWISE LOG TROUGH W/LADDER BACK CHAIN W/HYDRAULIC DRIVE W/20’ ENDWISE LOG TROUGH W/DOUBLE 3 ARM 2 WAY KICKERS

·         MORBARK 40’ OUTFEED ENDWISE LOG TROUGH W/2 WAY KICKERS W/HYDRAULIC DRIVE W/MORBARK 4’ X 5’ CONTROLS CAB

·         MORBARK 40’ 3 STRAND HEAVY DUTY LOG DECK W/4ARM STOP & LOADER W/ELECTRIC DRIVE

·         70’ ALL STEEL INCLINE WASTE CONVEYORR W/110 LADDERBACK CHAIN W/DRIVE

·         CUSTOM BUILT 40’ 3 STRAND INFEED LOG DECK W/#78 CHAIN W/4 ARM STOP & LOADER W/DRIVE

·         MCDONOUGH MODEL 72MA SLANTED BAND HEAD RIG W/AIR STRAIN W/HYD HOLD DOWN W/OFF BEARING BELT SN# 525-FR

·         CORLEY 11’ AIR OPERATED SLAB DROP W/CONTROLS W/CANT CATCHERS

·         CORLEY 3 HEAD BLOCK SLANTED LINEAR POSITTION CARRIAGE W/LINEAR SCAN COMPUTERIZED SCANNER SYSTEM W/CORLEY 35’ 4 STRAND HEAVY DUTY LOG DECK W/STOP & LOADER W/DRIVE

·         CORLEY 28” X 60’ HEAVY DUTY ROLLCASE W/8” ROLLS

·         12’ 4 STRAND POP UP TRANSFER W/#78 CHAIN W/BOARD STOP & DRIVE

·         WEVSTER 24” X 44’ VIBRATING CONVEYOR W/DRIVE

·         PRECISION 18” X 95’ VIBRATING CONVYOR W/DRIVE

·         CORLEY 385 SMAC TWIN HYDRAULIC SHOTGUN FEED W/(2) 150HP MOTORS

·         46” SUCTION BLOWER W/APPROX. 50HP MOTOR W/STAND

·         RECKHART MODEL R642 2 SAW EDGER W/2 MOVABLE SAWS W/INFEED ROLLCASE W/16’ SINGLE BELT TAILING OUTFEED SN# 083 W/2 LINE LAZER LITE W/60HP MOTOR

·         CORLEY 40’ 4 STRAND COLLECTOR DECK W/ROOFTOP CHAIN W/DRIVE

 

MILL #2

·         TYRONE BERRY SMA MODEL 280C HYDRAULIC SHOTGUN FEED W/150HP MOTOR

·         GARDNER DENVER 60HP SCREW TYPE AIR COMPRESSOR

·         GARDNER DENVER 50HP SCREW TYPE AIR COMPRESSOR

·         SERING BAR TYPE LOG TURNER W/50HP HYDRAULIC POWER PACK

·         CORLEY 36’ 3 STRAND HEAVY DUTY LOG DECK W/STOP & LOADER W/NOSE SKIDS

·         CLEEREMAN 2 HEAD BLOCK LINEAR POSTION CARRIAGE W/ON BOARD TURNERS W/TRACKWAY & PANTAGRAPH

·         CLEEREMAN 4’ X 6’ CONTROL CAB W/COMPUTER SETWORKS

·         SALEM 6’ BAND HEAD RIG W/SLAT BED W/WEIGHT STRAIN W/CORLEY AIR OPERATED SLAB DROP

·         CORLEY 22’ 4 STRAND COLLECTOR DECK W/81X CHAIN

·         CORLEY 24” X 80’ HEAVY DUTY ROLLCASE W/10” ROLLS W/SLAB DUMP W/DRIVE

·         10’ 4 STRAND TRASFER DECK W/CANT STOPS

·         24” X 40’ ROLLCASE W/4” ROLLS W/DRIVE

·         20’  3 STRAND COLLECTOR DECK W/#78 CHAIN W/DRIVE

·         40’ 4 STRAND COLLECTOR DECK W/130 ROOFTOP CHAIN W/DRIVE

·         COOK 6 X 36 2 SAW EDGER W/2 MOVABLE SAWS W/60HP MOTOR W/INFEED ROLLCASE W/18’ SINGLE BELT TAILING OUTFEED

·         7’ LETSON &BUREE BAND LINE BAR RESAW W/MCDONOUGH LINE BAR SYSTEM W/OUTFEED ROLLCASE W/SEPERATOR W/INFEED ROLLCASE W/CANT POSTITIONER & TURNER W/50HP HYDRAULIC POWER PACK SYSTEM W/CONTROLS

·         40HP HYDRAULIC POWER PACK W/LOG TURNER

·         24” X 20’ RETURN BELT W/DRIVE

·         MCDONOUGH 24” X 15’ HEAVY DUTY ROLLCASE W/10” ROLLS W/DRIVE

·         CORLEY 12’ 4 STRAND TRANSFER DECK W/DRIVE

·         CUSTOM BUILT 20’ 5 STRAND TRANSFER W/81X CHAIN W/DRIVE

·         CORLEY 32’ 4 STRAND TRANSFER DECK W/#78 CHAIN W/BOARD STOPS  W/DRIVE

·         APPROX 1000 GALLON AIR STORAGE TANK

·         AIRTEC MODEL TW250 AIR DRYING SYSTEM

 

 

TRIMMER & SORTER LINE

 

·         CORLEY 6 STRAND UNSCRAMBLER

·         25’ 4 STRAND TRANSFER DECK W/HEAVY 81X CHAIN W/6 STRAND UNSCRAMBLER

·         IRVINGTON MOORE 20’ DROP SAW TRIMMER W/INFEED TRANSFER W/LUG SYSTEM W/EVEN END ROLLS W/DOARD DEALER

·         6’ INFEED 6 STRAND INFEED TRANSFER W/BOARD DEALING SYSTEM W/GRADING POCKET W/OUTFEED TRANSFER W/LUG SYSTEM W/EVEN END ROLLS W/MOTORS & CONTROLS

·         16 BAY BIN SORTER

·         24” X 24’ TRANSFER W/DRIVE

·         APPROX 2000 GALLON AIR STROAGE TANK

·         PIONEER AIR DRYING SYSTEM

·         PHELPS 24” SINGLE TRAILER LOADING SYTEM W/25HP MOTOR

·         20” X 12’ INCLINE BELT CONVEYOR

·         PRECISION 66” 6 KNIFE CHIPPER W/HORIZONTAL FEED- TOP DISCHARGE

·         W/200 HP MOTOR SN# 1119

·         SODERHAM 7’ X 7’ CHIP SCREEN W/COLLECTOR

·         20’ 3 STRAND TRANSFER DECK W/81X CHAIN W/DRIVE

·         10’ 4 STRAND COLLECTOR DECK W/130 ROOFTOP CHAIN W/DRIVE

·         40” X 14’ ROLLCASE W/DRIVE

·         FULGHUM 8’ X 8’ CHIP SCREEN W/COLLECTOR

·         PRECISION 66” 6 KNIFE CHIPPER W/HORIZONTAL FEED- TOP DISCHARGE W/200HP MOTOR SN# 3032

·         WEBSTER 24” X 28’ HEAVY DUTY VIBRATING CONVEYOR W/TRANSITION SPOUT W/FIBERGLASS SECTION W/MDI METAL DETECTOR

·         WEBSTER 18” X 46’ VIBRATING CONVEYOR W/DRIVE

·         MORBARK 42” OSCILLATING LOADING & LEVELING SYSTEM W/30HP MOTOR

·         MORBARK 24” X 10’ INCLINE BELT CONVEYOR W/DRIVE

·         ALL STEEL WASTE CONVEYOR INCLINE W/25’ STEEL DRAGS

·         45’ DUAL AUGER LOADING & LEVELING SYSTEM

 

NOT INSTALLED

 

FULGHUM 60” 6 KNIFE CHIPPER W/HORIZONTAL FEED – TOP DISCHARGE

 

FILING ROOM

-(2) SIMONDS AUTOMATIC BAND SAW LEVELERS

-(2) ARMSTRONG #4 RH BAND SAW SHARPENER

-(2) ARMSTRONG #4 LH BAND SAW SHARPENER

-HATCHETT TABLE TYPE KNIFE SHARPENER

-(3) SETS OF HAMMERING BLOCKS

-WORK TABLES

-STRETCHER ROLLS

-TOOLING

 

Trucks

-1995 Ford F800 Flat Bed Dump, Cummins Engine, Auto, AC Mileage 373504.9:  VIN FOXF80E75VA60141

-1994 Chevy Bus, 5.7 Liter, Auto, Mileage 040058: VIN 1GBHG31K2RF152960 (Rebuilt Title)

-1973 GMC 6000, 350 Engine, Manual Transmission, Dump Bed: VIN TCE61TV560054- Does not run, has a bad engine

-2004 Chevy Colorado LS, 3.5 Liter Engine, Auto Transmission, Mileage 193904: VIN 1GCDS196048143806 (Rebuilt Title)

-2003 Dodge Dakota SXT, V6 Auto, 4x4, Mileage 111095: VIN 1D7HG12X03536998 (Rebuilt Title)

-1997 Ford F350 XL, 351 Engine, Auto, Service Bed, Mileage 85573: VIN 1FDKF37H4VEC5437

-1993 Chevy 2500, 5.7 Auto, Service Bed, Mileage 185620: VIN 1GCFC24KXP223029

Tractors

-2009 Freightliner Detroit Series 60 14 Liter 10 Speed: VIN 1FUALC49DAG6001

-2016 T880 Kenworth Cummins ISx15, 18 speed, Mileage 448413: VIN 1XKZD40X1GJ483457

-1993 International Cat engine 3406, 9 Speed, Log bed, AC, Mileage 5571700: VIN 2HSFELUR9HC069950

-1992 Peterbilt 357, Cat engine, 10 Speed, Log bed: VIN 1XPAD69X0ND323233

-2000 Freightliner Classic, Detroit Series 60, 12 Liter, 10 Speed, Wet line kit, Mileage 137627: VIN 1FUPFSZBTYLB59004

-1996 Peterbilt 377, N-14 Cummins, Wet line kit, Mileage 533485: VIN 1XPCD69X-XID395546

-International Daystar 5000, 4 wheel drive, Cummins N-14, 9 speed with dump bed, Mileage 871843: VIN TC062604

-2003 Tico Terminal Truck, 5.9 Cummins, Auto, AC and Heat, Hyd 5th wheel, 25291 Hours: VIN 118A6VTA653380

-1996 Mack Elite CL with Mack Engine, 18 Speed, 3 axles with 2 deck log bed, Mileage 111548: VIN 1M2AD62C0TW004145

2008 Chevrolet 2500 4x4 6.0 Allison Trans 260,xxx miles

2005 jeep TJ 4.0 6 speed 4x4 132,000 miles

2007 Ford F150 5.4 4x4 Automatic Trans 212,xxx miles

Trailers

-1991 Fruehauf 2 deck log trailer, black in color: VIN 1H2V04824MB04898

-1990 Homemade 2 deck log trailer, red in color: VIN TNVIN211201438001

-1969 Phelps  Lowboy, Tandem Axle, Ramps: Tag Number T115721

-2004 10 ft wide Lowboy, Hydraulic ramps, Tandem Axle. Made by Savannah Machine Shop Loader Company: VIN 1S9E0472545174555

-1983 Dorsey Chip Trailer, 45 ft., swing gate closed top,: VIN 1DTU22W23DA159896

-1978 Fruehauf Chip Trailer, 45 ft, swing gate, closed top: VIN MAZ567515

-1975 Fruehauf Chip Trailer, 45 ft, swing gate, closed top: VIN MAW484009

-1987 Fruehauf Chip Trailer, Swing gate, closed top: VIN 1HZ04524BC012421

-1981 Dorsey Chip Trailer, 45 ft, Swing gate, closed top: VIN 1DTV22W298W010411

-1987 Trail Mobile Chip Trailer, 45 ft, Swing gate, closed top: VIN 1PT011AJ1G9001691

-1983 Aztec 2 deck log trailer: VIN A789

-1983 Aztec 3 deck log trailer: VIN 1AZBR3A11D1013691

-1991 Utility 45 Ft Flat Bed Trailer: VIN 1UYFS2484NA694601

-2002 Homemade 2 deck log trailer: Plate Number TN 516430

-1998 Transcraft 48 ft Flat Bed Trailer, 96 inch wide with toolbox: VIN 1TTF48204W2001325

-1995 Homemade 2 deck log trailer: VIN TNCVEDV03102151DA

-2005 Homemade Red 3 Deck Log Trailer: VIN TNCVEDV03102150BA

 

Loaders

-Seelick TMF-55, 3 wheel loader, Deutz  engine air cool: VIN 548531155320- Does run but has a Bad Engine

-Toyota Forklift, Short Mask, Runs but knocks: VIN 5FG25

-Volvo 70 E Bucket Loader, Engine fire: VIN L70EV60575

-2007 Case 430 Skid Steer, Bucket and Forks, Foam filled tires: VIN N6M442007

-2008 70 Kawaski zV Loader with Log forks, AC, 12083 hours: VIN 70C5-5196

-2015 65 Kawaski TMV Loader with bucket and forks, AC, 17678 Hours: VIN 65J4-4238

HITACHI 180 ARTICULATING WHEEL LOADER W/QUICK ATTACH W/FORKS W/ENCLOSED CAB W/7500 HOURS

HITACHI 150 ARTICULATING WHEEL LOADER W/QUICK ATTACH W/FORKS W/ENCLOSED CAB W/9000 HOURS

Bobcat E50 Mini- Excavator w/1,145 hours

 

Skidders and Knucklebooms

-410E STATIONARY KB LOADER CONT GRAPPLE, W/ JOYSTICK CONTROLS W/ 100HP ELECTRIC MOTOR LOCATED IN CROSSVILLE, TN

-PRENTICE 410E KNUCKLEBOOM LOADER W/ SAW PACKAGE HOOP UP W/ CONT GRAPPLE W/ JOYSTICK CONTROLS MOUNTED ON TANDEM AXLE TRAILER LOCATED IN CROSSVILLE, TN

-(2) 648G D-A GRAPPLE SKIDDERS

-648G SINGLE ARCH GRAPPLE SKIDDER

-CTR Buck Saw

-410 E Prentice Knuckleboom, 5.9 Cummins

-CTR Buck Saw

-CTR De-limber Model 426

 

MISC

-Nightlight NL 5000, light tower on trailer, does not run: VIN 0600947

-Wacker Neuson LTN6, light tower on trailer, does not run: VIN 5XFLN0518CN005692