THIS IS A COMPLETED SALE
View current listings by this company

Formerly Tri-Tech Engineering Liquidation (ONLINE ONLY)
Previous Page Listing ID#: 1526887

Auction Location
Wyandotte, MI 48192

Auction Dates and TimesSALE IS COMPLETED
Tuesday Jul 18, 2023 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Check, or wire transfer. All payments are due immediately upon receipt of your invoice. Credit cards are only accepted on invoices with a total of less than $2500. All items are pick-up only. All items must be removed within 21 days unless otherwise noted. Loadout available by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. Online purchase payments are due immediately upon receipt of your invoice. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Check, or wire transfer. All payments are due immediately upon receipt of your invoice. Credit cards are only accepted on invoices with a total of less than $2500. All items are pick-up only. All items must be removed within 21 days unless otherwise noted. Loadout available by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. Online purchase payments are due immediately upon receipt of your invoice. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Check out this complete metal fabrication shop online only liquidation auction! No Reserves on this equipment! Everything you would need to put you right into the metal fab business! 00 Information Lot HIGHLIGHT PIECES: Metal Lathes, Mills, Drill Presses, Grinders, Cranes, Saws, Welders, Forklifts, Trucks, and lots of parts and supplies! 01 Preview Information Access to the facility only on 7-17-2023 from 8 AM to 4 PM. Contact Daniel 574-612-0074. 02 Loadout Information Two day free loadout of smalls only on 7-19 to 7-20 from 8 AM to 4 PM. Contact Dan 574-612-0074 ahead of time to schedule time and lots to be loaded. Buyers will have 30 days to remove installed equipment by appointment only. Buyers are responsible for rigging and loadout of installed equipment with proof of liability Riggers: David Matz 574-255-3195 or Jon Davenport 260-437-4481 03 Payment Information Payment terms: 13% Buyers Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. 04 Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 05 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 Monarch Metal Lathe 20 hp electric motor, three phase, 31 inch four jaw chuck, Dorian tool post, 176 inch bed. Includes 32 1/2" four jaw chuck, four mountable chucks, horizontal/vertical rotary table series 2 to 1, and a 12" three jaw chuck, electrical shut off. Catalog size and model 64NN, manufactured 1942, manufacturers number 7692, 36" actual swing, 20' x 6' x 7' overall size 101 Haverhill Metal Lathe 20 hp electric motor three phase 460 V, electrical shut off, 480 V General electric transformer, model: 9123B3883, 31 1/2" four jaw chuck, 4 1/2" hollowed spindle, 160" bed with 63" custom extension, wedge type tool post. Includes extra 31 1/2" four jaw chuck, steady rest with 24" inside measurement, steady rest with 12" inside measurement, number 20 Jacobs ball bearing super chuck 3/8 to 1" capacity, 110 V electric motor mounted to tool mount with a 24" extension sander, two prong lathe steady rest. 24" swing distance, manufacturers number 11055, 25' x 80" x 6' overall size 102 Sriov Lathe 20 hp electric drive, three phase, 20" inch four jaw spindle, 3 3/4" hollowed spindle, wedge type tool post, 109" bed. Includes steady rest with 12" inside measurement, steady rest with 9 1/2" inside measurement. Model 25 swing, SN: 2644/350. 25' x 6' x 6' overall size 103 Lucas 43B Precision Horizontal Mill 20 hp electric motor, three phase, electrical shut off, 7' x 42" adjustable mounting table, additional 3' x 3' x 1' rotating mounting table, ProTrak 102 CNC, Delta Corporation 2-021-00481, 21' x 11' x 11' overall size 104 Clausing Colchester 21 12 hp electric motor, three phase, 19 1/2" four jaw chuck, 135" bed, wedge type tool post. Includes additional 21" four jaw chuck, steady rest 9 1/2" inside measurement, steady rest 14 1/2" inside measurement. Number 18 N Jacobs ball bearing super chuck 1/8 to 3/4" capacity. 14" swing, 3 1/2" hollowed spindle, 184" x 4' x 6' overall size 105 Clausing Colchester 17 10 hp three phase electric motor, 15 3/4" four jaw chuck, 3" hollowed spindle, wedge type tool post. Includes 11" pipe mount, steady rest with 5" interior, measurement, steady rest with 7" interior measurement. 10" swing, 107" bed, 12' x 4' x 5' overall size 106 Monarch Metal Lathe 3 phase electric motor, 15 3/4" four jaw chuck, wedge, type tool post, 11" swing, 1 1/2" hollowed spindle. Includes steady rest 11" interior measurement, steady rest 6 1/2" interior measurement. 78" between center, catalog and model number 16" CW, manufacture is number 17053, manufactured 1942. 12' x 6' x 5' overall size 107 Boye & Emmes Metal Lathe 5 hp three phase electric motor, 10" four jaw chuck, 54" bed, wedge type tool post, 35" between centers, 11" swing. 14" lathe Number AA-46, 8' x 4' x 5' overall size. 109 Monarch Metal Lathe Three phase electric motor, 15 3/4" four jaw chuck, 78" bed, wedge type tool post, 60" between center, 11" swing. Catalog size and model 16"C. Actual swing 18 1/2", manufactures number 9565, manufactured in 1941. 110 Monarch Metal Lathe 15 hp three phase electric motor, 20" four jaw chuck, wedge type tool post, 82" bed, 22 1/2" actual swing, 48" between center, catalog size and model 20" M, manufacturers number 8941, manufactured in 1940, 12' x 5' x 6' overall size 111 HES Machine Lathe 15 hp 3 phase electric motor, 12" three jaw chuck, no tool post, 94" bed, 11" steady rest, carriage track is currently disassembled, type 550, SN: 15467, 11' x 3' x 5' overall size 112 Lux-Matter Metal Lathe 3 phase electric dr. 6 1/4" three jaw chuck, 1 1/2" hollowed spindles, 54" bed, which type tool post, 8" swing, 41" between centers, manufacturers number 971226, model FMT Dash 1500K, manufactured in 1997, 3' x 6' x 4' overall size 113 Select Gap Bed Metal Lathe 3 phase electric dr. 15 3/4" four jaw chuck, 100" bed, 20" swing, wedge, type tool post, 84" between center, steady rest 6" interior measurement, 11' x 4' x 5' overall size 114 TOS Metal Lathe Three phase electric dr. 10" three jaw chuck, 2" hollow spindle, 45" to center, 16" swing, 69" bed, 5" steady rest, wedge type tool post, additional 10", three jaw chuck, type SN40B, number 040100800121, 9' x 4' x 5' overall size. 116 Cincinnati Lathe/Grinder 3 phase, 1 ph electric drive on lathe and grinder, 8 1/4" four jaw chuck, 13" swing, 39 1/2" to centers, 10" x 1 1/2" grinder wheel, SN: 2U3D5A-1, 138" x 5' x 5' overall size 117 Ikeda RM1300 Radial Drill Press 3 phase electric dr., 360° swing radius, forward and reverse automated press down, rpm and depth speed is adjustable, 27 x 18 x 16 mounting table, 40" tall maximum capacity, no 20N Jacobs ball bearing super chuck 3/8 to 1" capacity, type RM1300, manufacturer number 77070, manufactured in 1977, 81" x 3' x 10' overall size 118 Bridgeport Drill Press 32" x 9" adjustable work surface, 22" tall maximum capacity, one hp three phase electric dr., with reversible sharpening attachment and dual head grinding stand. Includes Mitutoyo KA counter, model KA-12, SN: 7337451, Bridgeport SN: 70339, 4' x 5' x 7' overall size 119 Bridgeport Drill Press 1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, 1 hp 3 phase electric dr., includes SHARS SDS6-3V, adjustable vice, SN: J71026, 4' x 5' x 7' overall size 120 Bridgeport Drill Press 1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, SN: J29074, 4' x 5' x 7' overall size 121 Bridgeport Drill Press 1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, Includes a bridge port 15" rotary table SN: 3420, drill head is currently rotated 90°, drill SN: J-54599, 4' x 5' x 7' overall size 122 Jet Drill Press 3 hp 3 phase electric dr., 32" x 9" work surface, 8" Hartford rotary table with three jaw chuck, Mitutoyo KA counter model KA12, machine model number JTM-4VS, stock number 690182, SN: 501028, 5' x 5' x 7' overall size 123 Cincinnati Drill Press Currently disassembled some parts missing, includes service manual, and parts list catalog. 5 hp three phase electric dr., 15" x 64" adjustable work surface, model number three serial number for a 3P1U-13, 9' x 6' x 7' overall size 124 Clausing Drill Press 1.5 hp 3 phase electric dr., 24" x 40" work surface, includes four adjustable vices, 45" x 30" x 6' overall size 125 Hydraulic Press Ram pack hydraulics SN: 42298, 110 plug, 25" x 50" tall capacity 4' x 2' x 7' overall size 127 DoAll Grinder 8" x 39" work surface with 2 1/2" of vice, 6" grinding wheel, 1 1/4" arbor, model DH-612, SN: 138/651781, also includes additional grinder, condition unknown, some parts missing, 4' x 3' x 6' overall size of each grinder 128 DoAll Grinder 37" x 9" work surface, 6" grinding wheel, 1 1/4" arbor, 1 hp 3 phase electric dr. model G-1, SN: G 1-51912, 61" x 44" x 64" overall size 129 Cincinnati Grinding Stand, Ex-Cell-O Grinding Stand, and 12" Disc Sander Cincinnati Grinding Stand: 2 hp 3 phase electric dr.,1 1/2" x 8" grinding wheel 2" x 8" grinding wheel, SN: 225119, model 105, 2' x 2' x 4' overall size hitch. Ex-Cell-O Grinding Stand: Forwards and reverse, 1 1/2" x 8" grinding wheel, 1" arbor, 2' x 2' x 4' overall size. Sander: With 16" x 7" work surface, 21 1/2" belt sander, three phase, 2' x 2' x 3' 132 DoAll Band Saw 3 phase electric dr., 2' x 2' tiltable, work surface, 8" tall capacity, 1 1/2" x 16" band wheels, model M-L, SN: 521-7375, 3' x 40" x 76" overall size 133 Gould and Everharot 36" Industrial Shaper 15 hp 3 phase electric dr. 16" vise, 36" x 18" adjustable work surface, 10' x 53" x 6' overall size 134 HEM Horizontal Metal Saw 5 hp 3 phase electric dr., 20' x 28" skate roll in feed, 10' x 25" skate roll out feed, 24" x 3 1/2" steel rolls, 6 1/2" on center, 1 1/2 x 18" band wheels, two used and two new cutting bands, length vice, built-in hydraulics for raising arm, model 1200LM, SN: 97279, 32' x 8' x 5' overall size 135 Missile Hydraulic Tester 3 phase electric dr., 2000 max psi, 2GPM, max flow, retractable hydraulic hose connectors, manual locking hydraulic valve, AS tech euro press, additional male 1/2" hydraulic quick connectors, SN: 1198, Model XM14, 5' x 32" x 38" in overall size, 4" plastic coasters 136 Hydraulic Pack 10 hp three phase electric dr., 1 1/2" hydraulic quick connectors with 14" of hose, manual locking hydraulic valve, 62" x 30" x 20" tank, male 1 1/2" quick connectors and fittings, additional hose and valve, 62" x 33" x 4' overall size 137 Detroit Air Compressor 20 hp 3 phase electric Dr., Worthington pump, SN: 876-1174, pump size 6/6/4 1/2 x 2 3/4, unit SN 710310X, 6' x 2' tank, no air lines included, 6' x 2' x 7' overall size, includes breaker box 138 Air Compressor 5 hp 3 phase electric dr., Quincy compressor model: 325-10, SN: 464181L, 5' x 20" tank, 6' x 2' x 77" overall size, includes all airlines in facility 139 2 Ton Overhead Crane 80" long I-Beam track, 1 ton Yale spur geared block hoist mounted on 25' crossmember I-beam, 14' I-beam support legs, includes one barrel of tow straps 140 2 Ton Overhead Crane Approximately 80 foot long I-beam track, 2 ton Yale hoist mounted on 20 foot I-beam, 2 ton WRIGHT hoist mounted on 20 foot I-beam track, includes one barrel of tow straps, no support legs, track is mounted directly to ceiling 141 Kone 5 Ton Overhead Crane Three phase MGM transformer, 480 V, KONE XL300 5 ton hoist, approximately 62 feet long I-beam track, and 35 foot crossmember, I-beam, and includes twelve 115 inch tall leg support I-beams below track, serial number 5820836 160 Stainless Steel Rod New still in cardboard, 177“ x 4 3/4" 161 Stainless Steel Rod New still in cardboard, 190” x 4 1/2" 162 Stainless Steel Rod New still in cardboard, 184 1/2“ x 3 7/8" 162A Steel Rack with Stainless Steel Rods All rods are included except for the rods for lot # 160, 161, and 162, rod measurements are 20‘ x 2 1/4", 75 3/8" x 4 1/4", 83 1/2“ x 3“, 20‘ x 2“, 89 1/4“ x 1 3/8“, 68“ x 1“, 167 1/2“ x 3“, 82 1/2” x 3 1/4”, 69 1/2” x 1”, 8‘ x 32“ x 81’ material rack, seven sets of 12 inch adjustable arms 163 Stainless Steel Rod 236" x 6 3/4" 164 Stainless Steel Rod 37 5/8“ x 12 1/8“ 165 Stainless Steel Rod 77 1/2“ x 8 1/2“, 73“ x 5 and three eights inches, 82“ x 3“, 69“ x 1 1/8“, 69“ x 1 1/8“, 53 1/2“ x 2“, 41“ x 4 1/4“ 166 Stainless Steel Rod and Rack 61 1/2“ x 6 7/8“, 47“ x 2 3/4“, 47“ x 2 3/4“, 55 1/2“ x 3“, 61 1/2" x 7", 61 1/2“ x 7“, 52“ x 4 5/8", 44 1/2“ x 2“, 47 1/2“ x 2 3/4“ stainless steel rods, 16‘ x 3‘ x 30“ steel rack 167 Steel Workbench 136” x 42” x 35 1/2”, three rigid pipe vices 168 Steel Workbench 68“ x 36“ x 35“, one rigid pipe vise, includes all contents, wrench set 169 Steel Workbench 68” x 36” x 35”, one rigid pipe vise, 6 inch Wilton bench vice, 13 inch punch press, includes all contents 170 Steel Workbench 68“ x 36“ x 35“, two rigid pipe vise, two 50 foot cords, includes all contents 171 Tools and Workbench Seven drawer craftsman tool bench, wooden tool, bench, filing cabinet, storage cupboard, power team hydraulic jack gear puller, half inch and three-quarter inch torque wrench, 1 inch ratchet, includes all contents, Lincoln, cordless grease gun, one 7.2 V rechargeable battery 172 Craftsman Tool Chests includes all contents, hydraulic fittings, threading tools, socket sets, air attachments, punches, open end wrenches, files 173 Grinding Stand and Tools 1 hp 3 phase Electric Dr., plastic, mallets, wooden shelves, assorted 1 inch deep well sockets 174 Assorted Sockets and Tools 20” x 26” x 27” metal shelf, wire, brush stand, assorted, 1 inch sockets, air tools, sledgehammers, letter punches 175 Hydraulic Impact 110 V, 1 inch impact, or 2 1/2 inch impact, 1 1/2 inch impact, 10 foot hydraulic hose, all mounted on a rolling metal cart. 176 Threading Tools Oster 2" pipe conduit in Bolton machine, NO. 655., Serial number WS1311. 148 inch rigid, pipe, wrench, rigid pipe threading tools 177 Oil Pans and Barrels Two 12‘ x 3‘ x 8“ oil pans with walk grating, 15 barrels of hydraulic oil/actuator oil, 5‘ x 3‘ x 8‘ steel shelf, 23 inches between shelves 178 Evco Industrial Absorbent Forty 40 lb. bags, two waste bins and buckets 179 Steal Shelves and Assorted Hydraulic Fittings 2’ x 6’ x 30” steel shelf, three 26“ x 20“ x 29“ steel shelves, assorted hydraulic heads, assorted hex screws, hydraulic fittings, and elbows 180 Steel Workbench and Welding Material 67“ x 3‘ x 35“ work table, 1 1/2 inch steel table surface, welding wire, rods, work stands, three jaw chuck rotating vice, 3’ x 18” x 42” metal cabinet, includes contents, 15” x 18” x 28” two drawer filing cabinet, includes all contents 181 Worthington Rotary Work Table 34" diameter, adjustable up to 90°, 2500 lbs. capacity, SN: 35288783 182 Miller Arc Welder SN: HJ147417, steel cart, works 183 Miller Arc Welder Steel cart, condition unknown, includes Miller wire feed, model gold star 400SS, SN: HJ194962 184 Linde Welder Includes wire, feed, condition, unknown, type VI – 253, serial number B80C20217, 230/460 V three phase, 250 A. It includes wire grinder, three phase 185 Lincoln Electric Power Wave 455 Welder Works, Steel cart, Lincoln electric wire feed, Miller cool mate 4. Welder code number 10872, serial number 01971004612. Wire feed code number 10438, serial number U1970809780. Cool mate stock number 042288, serial number KH370092 186 Miller Arc Welder Condition unknown, steal cart, serial number HJ187616 187 Miller Synchro Wave 351 Arc Welder Single phase, 17.4 kW, 200/230/460 V, 151/131/67 A, stock number 903219, serial number KD501710, steel cart, works good, Miller water mate stock number 042495, serial number KD472594 188 Welders and Sweeper Linc welder DC 250MK , three phase 220 V, 32 A. Miller econtig 230 V, 52 A, single phase, stock number 903367, serial number KJ101312, condition unknown. Miller wire feed, and motorized metal floor sweeper, with 7 hp Briggs & Stratton, gas engine, 20" wide input 189 Steel Workbench and Contents 2' x 6' x 3' workbench, 14" chop grinder, includes all contents 190 4 Yard Trash Hopper Includes steel shavings, 3" coasters 191 Factory Fans A total of 20 fans, 3’ x 3’ box fan on wheels, all single phase with 110 plugs 192 Air Compressor Cobalt 30 gallon, single phase compressor, good condition, 155 max psi, central pneumatic, 2 hp, 4 gallon compressor, and 115 max psi, puma 20 gallon tank and compressor no motor, 10 gallon tank air compressor 193 Metal Working Tools 20" x 26" x 32" metal cart, 34“ x 29“ x 44“ metal cabinet, number 18 N Jacob super ball bearing chuck, assorted lathe drill bits 194 Metal Working Tools 3‘ x 2‘ x 42“ metal cabinet, 3‘ x 2‘ x 7‘ metal cabinet, assorted shaper tools, whisper cutting heads/boring heads 195 Metal Working Tools Assorted drill bits, boring bits, threading tools, tap and dye sets, two 21” x 16” x 3’ metal cabinets, two 25” x 18” x 3’ metal drawer sets 196 Thread Testing Sets Assorted male and female thread testing units, various sizes, 3‘ x 24‘ x 31“ metal shelf, assorted plastic bore hole caps, 8’ x 16” x 8’ wooden shelf, includes all contents 197 Lockers with Contents Assorted machine and lathing tools, 2‘ x 3‘ x 7‘ metal cabinet, 2‘ x 3‘ x 46“ wooden cabinet, 18“ x 3‘ x 6‘ metal shelf, 9’ x 12” x 66” lockers, 7’ x 18” x 6’ metal lockers, includes all contents, Milwaukee 1 1/4 super hole cutter with a Jacobs ball bearing super chuck number 20N, 3/8 to 1" capacity 198 Metal Working Tools 3‘ x 18“ x 70“ metal cabinet, assorted cutting/boring tools, three 15” x 21” x 34” metal cabinets, includes all contents 199 Metal Working Tools 6’ x 31” x 35” workbench, 4 1/2 inch bench base, assorted drill bits and threading tools, includes all contents 200 Metal Working Tools Assorted drill bits, Jacob ball bearing super chucks, wedge type tool post and mounts 6‘ x 23 x 32“ workbench, includes all contents 201 Metal Working Tools 6' x 30" x 32" workbench, 26" x 20" x 32" metal cart, 18" x 35" x 60" wooden shelf, includes all contents, tool post attachments, assorted drill bits, brass scrap 202 Precision Tools 6' x 30" x 35" workbench, thickness gauges ranging from 1" to 28", calipers Rockwell hardness tester, boring gauge 203 Thread Testers and Brass 40" x 28" x 6' steel shelf, assorted thread testers, brass scrap, brass shavings 204 Work Benches and Assorted Tools 2-32" x 6' x 35" workbenches, drill bits, tool post attachments, metal tools, 5-26" x 22" x 32" metal shelves, 2-30" x 6' x 32" workbenches 205 Steel Shelf 10' x 3' x 8', includes all contents, grinding wheels, lathe chucks 206 Steel Cart Includes all contents, 8' x 1 1/2" threaded rod, 3' x 4" stainless steel rod 207 Steel Cart 6' x 3' x 56", swiveling coasters, includes all contents 208 Steel Tree Rack 45" x 32" x 8' rack with seven sets of adjustable 12" arms, includes all contents, and surrounding content labeled, New 64" x 4 1/2" stainless steel rod, threaded rods 209 Steel Shelves 70" x 2' x 70", 12' x 2" x 70", includes all contents 210 Steel Rack and Contents 6' x 4' x 7' triangular rack with 12" arms, 52 1/4" x 4", 60" x 2 1/2", 70 1/2" x 2 1/2", 53" x 5 1/2", 66" x 1 1/4" stainless steel rods, 6", 4", 3 1/2", 3", 2 1/2", 2 1/4" steel pipe, hydraulic cylinder heads and ends 211 Steel Rack and Contents 3' x 92" x 9' rack with 32" arms, 168 3/4" x 7" , 236" x 6 1/2", 152" x 2 1/2", 93 1/2" x 5" stainless steel rods, includes all contents, 9" pipe 212 Steel Rods and Pipe 91" x 3 3/4", 58" x 7", 52 1/2" x 5 1/2", 171" x 4 1/4" stainless steel rods. 8", 9", 6", 6 1/2" steel pipe 213 Pallet Racking with Contents 6-3' x 10' legs, 25 pairs of 8" arms, approx. 150 organizing bins, includes all contents, steel rods, bolts, steel scrap 214 Steel Pipe and Tubing Various sizes and lengths, 12" x 2" 215 Stainless Steel Rods 41 1/2" x 4 1/4", 42" x 7", 36" x 3 1/2", 29 1/2" x 3", 31 1/4" x 4, 43" x 2 3/4", 32 1/2" x 3 1/2", 44 1/4" x 3", stainless steel rods and other various sizes 216 5 Cubic Yard Hopper With all contents, loaded with steel 217 Steel Rack with Content 3' x 31" x 78" steel rack with 14" arms, 6' x 4", 41" x 5", 74" x 18", 69 1/2" x 2 1/2, 52 1/4" x 4 1/4" 77" x 2 1/2" stainless steel rods, with other assorted stainless steel rods 218 Steel Carts 2-6' x 2' x 56" carts, 6" coasters, includes all stainless steel rods, boxes, and contents 219 12" x 12" Steel Springs 9 steel springs 220 Steel Rack 158" x 56" x 62" steel rack, includes all contents, 9 1/2" x 9 1/2" x 64" cylinder steel rods, steel couplings, assorted hydraulic cylinder parts 221 Paint Station 150" x 25" x 35" metal workbench, 2 filing cabinets, spray paints, includes metal wall rack 80" tall with 19" arms, includes all steel pipe, rods, and hydraulic cylinder, paint buckets, paper cutter, electric airless paint sprayer, letter punch, roll of plastic 222 Fuel Tank 4'x 2' x 2' fuel tank with hand pump, empty 223 Hydraulic Cylinder 16" x 53" reheat furnace pusher, T-2398MM, SN: 12305, rebuilt 11-21-11, 6" pin hole 224 Hydraulic and Air Cylinders 2-6" x 9" air cylinders, 3-6" x 4" air cylinders, 1-6" x 9" hydraulic cylinder 225 Hydraulic Cylinder Bare and stroke, size unknown 226 Steel Pipe Various sizes, 7" -22", incomplete hydraulic cylinder, brass scrap 227 Scrap Metal 40" x 28" x 5' steel rack, 163" x 4' x 8' steel rack, steel pipe, oil barrels 228 Scrap Metal Stainless Steel rods, floor cleaners, barrels of shavings, steel scrap, broken metal working machine 229 Scrap Metal International truck and trailer, includes contents on trailer stainless steel rods, air cylinder, steel pipes 230 Metal Scrap Steel and brass shavings, 40 barrels, broken hydraulic cylinder 231 Stainless Steel Rod 172" x 20" diameter stainless steel rod 232 Stainless Steel Rods 2-118" x 6 1/2" stainless steel rods, 64" x 6 1/2", 56" x 6 1/2", 3- 106" x 12 1/2" stainless steel tubes, 104" x 21 1/2 steel tube, 8' x 16" steel tube 233 Scrap Metal Broken air compressor, steel carts, steel rods, oil barrels 234 Scrap Metal 18' x 7' x 6' steel rack, stainless steel rods, electric motor, steel pipe, shavings, vending machine, 2 fuel tanks, hydraulic cylinder, Multi hydraulic and air cylinder 235 Scrap Metal 3-broken welders, 2 lathe parts, pallet of scrap steel, steel rings, 3 pallets hydraulic parts 236 Scrap Metal Broken drill press, metal hoist, semi tires, 2-11R22.5 RLB400 double coin, assorted semi tires, 225-70R14 tires, hydraulic tank 237 Truck/Scrap Metal 5' x 4' x 3' dumpster, Chevy 1500 truck VIN: 1GCEC14V81EZ77010, condition unknown, stainless steel cylinder 44" x 10" 238 Bearings 36" x 18" x 64" drawer chest with assorted bearings 239 Bolt Bin 4-35" x 12" x 42' sections with assorted bolts, nuts, washers, and hex bolts 240 Bolt Bin 4-35" x 12" x 42' sections with assorted bolts, nuts, washers, and hex bolts 241 Parts Room Assorted O-rings, grease fittings, machine tool teeth, machine tools, bolt bin with assorted bolts, nuts, bearings, grinding wheels, hydraulic heads, plastic seals, parts organizers, ball bearing pins, cotter key, snap rings 242 O-Rings and Filing Cabinet Various sizes O-rings, oil seals, hydraulic valves, Polymite seals, Urethane seals 243 Drill and Tap Tools 3' x 18" x 6' cabinet, 2-26" x 12" x 12" tool chest, 29" x 20" x 16" tool chest various carbide teeth, brand new metal working tools, various drills, brand-new tap bits, carded mill drill, oxygen regulator gauge 244 Workbenches and Cabinets 6' x 3' x 3' metal workbench, 6' x 30' x 34" metal workbench includes all contents, parts organizer, 2-30" x 15" x 30" metal shelves, 5' x 3' x 30" wooden desk, 4' x 19" x 78" wooden cab, includes all contents and truck parts, 2 ton hoist 245 Carts and Rollers 3-2 wheel dollies, 2-welding carts, 5 sets of roller stands 246 Banding Carts 2 banding carts, 1/2 steel band, 1 1/4" steel band, includes tensioners 247 Power Washer, Ladders, and Brooms 12' extension ladder, 12' step ladder, 10' step ladder, 6' step ladder, Ex-cell 3200 psi power washer Honda GX340 11 hp 248 Office contents and Furniture 2 folding tables, refrigerator, working vending machine, break room chairs, microwaves, 10 office desks, 18 filing cabinets, computers, printers, office chairs 249 Scrap Steel 4 barrels of brass shavings, steel tubing, chunks, and lathe chucks 275 Hydraulic Pallet Jack 24" x 4 1/2" forks, battery powered hydraulic pump, 68" high capacity, push driven 276 Heavy Duty Forklift Cage 63" x 46" x 43" 277 Forklift Crane Extendable from 5' to 10" 278 Forklift Crane Extendable from 5' to 10" 279 Clark G Forklift SN: CY70 Meter reads: 2,303 hours Engine: 6 cylinder continental motor corp Fuel type: LP Load capacity: 7,000 lb Stage mast: 2 Mast height: 70 1/2" Side shift: No Fork positioner: No ROPS: Yes Tire size: (front) 3.25-15 (rear) 7.00-12NHS Tires: Pneumatic Features and Notes: 47" x 4 1/2" forks. Needs new battery, hasn't been started in two years, 78" snow blade attachment. Sat inside. 280 Clark Lift C500 55 G Forklift SN: 355 343 4046 778 Meter reads: 9,005 hours Engine: 4 cylinder Clark Fuel type: LP Load capacity: 5,000 lb Stage mast: 2 Mast height: 67 1/2" Side shift: No Fork positioner: No ROPS: Yes Tire size: 18 x 6 x 12 1/2 Tires: Solid Features and Notes: 42" x 4" forks, hasn't been started in two years, needs new battery, sat inside. 281 Clark GCS30MB Forklift SN: G138MB-1243-6961KOF Meter reads: 4,393 hours Engine: Clark 4 cylinder Fuel type: LP Load capacity: 6,000 lb Stage mast: 2 Mast height: 80" Side shift: No Fork positioner: No ROPS: Yes Tires: Solid Features and Notes: 57" x 5" forks. Hydraulic leak, kept inside, needs battery, no brakes, tank not included. 282 2007 GMC 2500 Pickup Truck VIN: 1GTHC29U37E196489 Meter reads: 361,037 miles Engine: 6.0L V8 Tires: 245/75R/16 Heat/AC: Yes Features and Notes: New battery, 8' bed 283 2004 International 4000SE Semi Truck VIN: 1HTMKAAN44H607315 Meter reads: 336,268 miles Engine: International VT 365 diesel Transmission: 6 speed Tires: 11R22.5 Heat/AC: Yes Features and Notes: New batteries, backup camera, 23' x 8' bed, removable wooden sides, air brakes

Listing Information

Check out this complete metal fabrication shop online only liquidation auction! No Reserves on this equipment! Everything you would need to put you right into the metal fab business!

Information Lot
HIGHLIGHT PIECES: Metal Lathes, Mills, Drill Presses, Grinders, Cranes, Saws, Welders, Forklifts, Trucks, and lots of parts and supplies!

Preview Information
Access to the facility only on 7-17-2023 from 8 AM to 4 PM. Contact Daniel 574-612-0074.

Loadout Information
Two day free loadout of smalls only on 7-19 to 7-20 from 8 AM to 4 PM. Contact Dan 574-612-0074 ahead of time to schedule time and lots to be loaded. Buyers will have 30 days to remove installed equipment by appointment only. Buyers are responsible for rigging and loadout of installed equipment with proof of liability
Riggers: David Matz 574-255-3195 or Jon Davenport 260-437-4481

Payment Information
Payment terms: 13% Buyers Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice.

Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

Monarch Metal Lathe
20 hp electric motor, three phase, 31 inch four jaw chuck, Dorian tool post, 176 inch bed. Includes 32 1/2" four jaw chuck, four mountable chucks, horizontal/vertical rotary table series 2 to 1, and a 12" three jaw chuck, electrical shut off. Catalog size and model 64NN, manufactured 1942, manufacturers number 7692, 36" actual swing, 20' x 6' x 7' overall size

101

Haverhill Metal Lathe
20 hp electric motor three phase 460 V, electrical shut off, 480 V General electric transformer, model: 9123B3883, 31 1/2" four jaw chuck, 4 1/2" hollowed spindle, 160" bed with 63" custom extension, wedge type tool post. Includes extra 31 1/2" four jaw chuck, steady rest with 24" inside measurement, steady rest with 12" inside measurement, number 20 Jacobs ball bearing super chuck 3/8 to 1" capacity, 110 V electric motor mounted to tool mount with a 24" extension sander, two prong lathe steady rest. 24" swing distance, manufacturers number 11055, 25' x 80" x 6' overall size

102

Sriov Lathe
20 hp electric drive, three phase, 20" inch four jaw spindle, 3 3/4" hollowed spindle, wedge type tool post, 109" bed. Includes steady rest with 12" inside measurement, steady rest with 9 1/2" inside measurement. Model 25 swing, SN: 2644/350. 25' x 6' x 6' overall size

103

Lucas 43B Precision Horizontal Mill
20 hp electric motor, three phase, electrical shut off, 7' x 42" adjustable mounting table, additional 3' x 3' x 1' rotating mounting table, ProTrak 102 CNC, Delta Corporation 2-021-00481, 21' x 11' x 11' overall size

104

Clausing Colchester 21
12 hp electric motor, three phase, 19 1/2" four jaw chuck, 135" bed, wedge type tool post. Includes additional 21" four jaw chuck, steady rest 9 1/2" inside measurement, steady rest 14 1/2" inside measurement. Number 18 N Jacobs ball bearing super chuck 1/8 to 3/4" capacity. 14" swing, 3 1/2" hollowed spindle, 184" x 4' x 6' overall size

105

Clausing Colchester 17
10 hp three phase electric motor, 15 3/4" four jaw chuck, 3" hollowed spindle, wedge type tool post. Includes 11" pipe mount, steady rest with 5" interior, measurement, steady rest with 7" interior measurement. 10" swing, 107" bed, 12' x 4' x 5' overall size

106

Monarch Metal Lathe
3 phase electric motor, 15 3/4" four jaw chuck, wedge, type tool post, 11" swing, 1 1/2" hollowed spindle. Includes steady rest 11" interior measurement, steady rest 6 1/2" interior measurement. 78" between center, catalog and model number 16" CW, manufacture is number 17053, manufactured 1942. 12' x 6' x 5' overall size

107

Boye & Emmes Metal Lathe
5 hp three phase electric motor, 10" four jaw chuck, 54" bed, wedge type tool post, 35" between centers, 11" swing. 14" lathe Number AA-46, 8' x 4' x 5' overall size.

109

Monarch Metal Lathe
Three phase electric motor, 15 3/4" four jaw chuck, 78" bed, wedge type tool post, 60" between center, 11" swing. Catalog size and model 16"C. Actual swing 18 1/2", manufactures number 9565, manufactured in 1941.

110

Monarch Metal Lathe
15 hp three phase electric motor, 20" four jaw chuck, wedge type tool post, 82" bed, 22 1/2" actual swing, 48" between center, catalog size and model 20" M, manufacturers number 8941, manufactured in 1940, 12' x 5' x 6' overall size

111

HES Machine Lathe
15 hp 3 phase electric motor, 12" three jaw chuck, no tool post, 94" bed, 11" steady rest, carriage track is currently disassembled, type 550, SN: 15467, 11' x 3' x 5' overall size

112

Lux-Matter Metal Lathe
3 phase electric dr. 6 1/4" three jaw chuck, 1 1/2" hollowed spindles, 54" bed, which type tool post, 8" swing, 41" between centers, manufacturers number 971226, model FMT Dash 1500K, manufactured in 1997, 3' x 6' x 4' overall size

113

Select Gap Bed Metal Lathe
3 phase electric dr. 15 3/4" four jaw chuck, 100" bed, 20" swing, wedge, type tool post, 84" between center, steady rest 6" interior measurement, 11' x 4' x 5' overall size

114

TOS Metal Lathe
Three phase electric dr. 10" three jaw chuck, 2" hollow spindle, 45" to center, 16" swing, 69" bed, 5" steady rest, wedge type tool post, additional 10", three jaw chuck, type SN40B, number 040100800121, 9' x 4' x 5' overall size.

116

Cincinnati Lathe/Grinder
3 phase, 1 ph electric drive on lathe and grinder, 8 1/4" four jaw chuck, 13" swing, 39 1/2" to centers, 10" x 1 1/2" grinder wheel, SN: 2U3D5A-1, 138" x 5' x 5' overall size

117

Ikeda RM1300 Radial Drill Press
3 phase electric dr., 360° swing radius, forward and reverse automated press down, rpm and depth speed is adjustable, 27 x 18 x 16 mounting table, 40" tall maximum capacity, no 20N Jacobs ball bearing super chuck 3/8 to 1" capacity, type RM1300, manufacturer number 77070, manufactured in 1977, 81" x 3' x 10' overall size

118

Bridgeport Drill Press
32" x 9" adjustable work surface, 22" tall maximum capacity, one hp three phase electric dr., with reversible sharpening attachment and dual head grinding stand. Includes Mitutoyo KA counter, model KA-12, SN: 7337451, Bridgeport SN: 70339, 4' x 5' x 7' overall size

119

Bridgeport Drill Press
1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, 1 hp 3 phase electric dr., includes SHARS SDS6-3V, adjustable vice, SN: J71026, 4' x 5' x 7' overall size

120

Bridgeport Drill Press
1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, SN: J29074, 4' x 5' x 7' overall size

121

Bridgeport Drill Press
1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, Includes a bridge port 15" rotary table SN: 3420, drill head is currently rotated 90°, drill SN: J-54599, 4' x 5' x 7' overall size

122

Jet Drill Press
3 hp 3 phase electric dr., 32" x 9" work surface, 8" Hartford rotary table with three jaw chuck, Mitutoyo KA counter model KA12, machine model number JTM-4VS, stock number 690182, SN: 501028, 5' x 5' x 7' overall size

123

Cincinnati Drill Press
Currently disassembled some parts missing, includes service manual, and parts list catalog. 5 hp three phase electric dr., 15" x 64" adjustable work surface, model number three serial number for a 3P1U-13, 9' x 6' x 7' overall size

124

Clausing Drill Press
1.5 hp 3 phase electric dr., 24" x 40" work surface, includes four adjustable vices, 45" x 30" x 6' overall size

125

Hydraulic Press
Ram pack hydraulics SN: 42298, 110 plug, 25" x 50" tall capacity 4' x 2' x 7' overall size

127

DoAll Grinder
8" x 39" work surface with 2 1/2" of vice, 6" grinding wheel, 1 1/4" arbor, model DH-612, SN: 138/651781, also includes additional grinder, condition unknown, some parts missing, 4' x 3' x 6' overall size of each grinder

128

DoAll Grinder
37" x 9" work surface, 6" grinding wheel, 1 1/4" arbor, 1 hp 3 phase electric dr. model G-1, SN: G 1-51912, 61" x 44" x 64" overall size

129

Cincinnati Grinding Stand, Ex-Cell-O Grinding Stand, and 12" Disc Sander
Cincinnati Grinding Stand: 2 hp 3 phase electric dr.,1 1/2" x 8" grinding wheel 2" x 8" grinding wheel, SN: 225119, model 105, 2' x 2' x 4' overall size hitch. Ex-Cell-O Grinding Stand: Forwards and reverse, 1 1/2" x 8" grinding wheel, 1" arbor, 2' x 2' x 4' overall size. Sander: With 16" x 7" work surface, 21 1/2" belt sander, three phase, 2' x 2' x 3'

132

DoAll Band Saw
3 phase electric dr., 2' x 2' tiltable, work surface, 8" tall capacity, 1 1/2" x 16" band wheels, model M-L, SN: 521-7375, 3' x 40" x 76" overall size

133

Gould and Everharot 36" Industrial Shaper
15 hp 3 phase electric dr. 16" vise, 36" x 18" adjustable work surface, 10' x 53" x 6' overall size

134

HEM Horizontal Metal Saw
5 hp 3 phase electric dr., 20' x 28" skate roll in feed, 10' x 25" skate roll out feed, 24" x 3 1/2" steel rolls, 6 1/2" on center, 1 1/2 x 18" band wheels, two used and two new cutting bands, length vice, built-in hydraulics for raising arm, model 1200LM, SN: 97279, 32' x 8' x 5' overall size

135

Missile Hydraulic Tester
3 phase electric dr., 2000 max psi, 2GPM, max flow, retractable hydraulic hose connectors, manual locking hydraulic valve, AS tech euro press, additional male 1/2" hydraulic quick connectors, SN: 1198, Model XM14, 5' x 32" x 38" in overall size, 4" plastic coasters

136

Hydraulic Pack
10 hp three phase electric dr., 1 1/2" hydraulic quick connectors with 14" of hose, manual locking hydraulic valve, 62" x 30" x 20" tank, male 1 1/2" quick connectors and fittings, additional hose and valve, 62" x 33" x 4' overall size

137

Detroit Air Compressor
20 hp 3 phase electric Dr., Worthington pump, SN: 876-1174, pump size 6/6/4 1/2 x 2 3/4, unit SN 710310X, 6' x 2' tank, no air lines included, 6' x 2' x 7' overall size, includes breaker box

138

Air Compressor
5 hp 3 phase electric dr., Quincy compressor model: 325-10, SN: 464181L, 5' x 20" tank, 6' x 2' x 77" overall size, includes all airlines in facility

139

2 Ton Overhead Crane
80" long I-Beam track, 1 ton Yale spur geared block hoist mounted on 25' crossmember I-beam, 14' I-beam support legs, includes one barrel of tow straps

140

2 Ton Overhead Crane
Approximately 80 foot long I-beam track, 2 ton Yale hoist mounted on 20 foot I-beam, 2 ton WRIGHT hoist mounted on 20 foot I-beam track, includes one barrel of tow straps, no support legs, track is mounted directly to ceiling

141

Kone 5 Ton Overhead Crane
Three phase MGM transformer, 480 V, KONE XL300 5 ton hoist, approximately 62 feet long I-beam track, and 35 foot crossmember, I-beam, and includes twelve 115 inch tall leg support I-beams below track, serial number 5820836

160

Stainless Steel Rod
New still in cardboard, 177“ x 4 3/4"

161

Stainless Steel Rod
New still in cardboard, 190” x 4 1/2"

162

Stainless Steel Rod
New still in cardboard, 184 1/2“ x 3 7/8"

162A

Steel Rack with Stainless Steel Rods
All rods are included except for the rods for lot # 160, 161, and 162, rod measurements are 20‘ x 2 1/4", 75 3/8" x 4 1/4", 83 1/2“ x 3“, 20‘ x 2“, 89 1/4“ x 1 3/8“, 68“ x 1“, 167 1/2“ x 3“, 82 1/2” x 3 1/4”, 69 1/2” x 1”, 8‘ x 32“ x 81’ material rack, seven sets of 12 inch adjustable arms

163

Stainless Steel Rod
236" x 6 3/4"

164

Stainless Steel Rod
37 5/8“ x 12 1/8“

165

Stainless Steel Rod
77 1/2“ x 8 1/2“, 73“ x 5 and three eights inches, 82“ x 3“, 69“ x 1 1/8“, 69“ x 1 1/8“, 53 1/2“ x 2“, 41“ x 4 1/4“

166

Stainless Steel Rod and Rack
61 1/2“ x 6 7/8“, 47“ x 2 3/4“, 47“ x 2 3/4“, 55 1/2“ x 3“, 61 1/2" x 7", 61 1/2“ x 7“, 52“ x 4 5/8", 44 1/2“ x 2“, 47 1/2“ x 2 3/4“ stainless steel rods, 16‘ x 3‘ x 30“ steel rack

167

Steel Workbench
136” x 42” x 35 1/2”, three rigid pipe vices

168

Steel Workbench
68“ x 36“ x 35“, one rigid pipe vise, includes all contents, wrench set

169

Steel Workbench
68” x 36” x 35”, one rigid pipe vise, 6 inch Wilton bench vice, 13 inch punch press, includes all contents

170

Steel Workbench
68“ x 36“ x 35“, two rigid pipe vise, two 50 foot cords, includes all contents

171

Tools and Workbench
Seven drawer craftsman tool bench, wooden tool, bench, filing cabinet, storage cupboard, power team hydraulic jack gear puller, half inch and three-quarter inch torque wrench, 1 inch ratchet, includes all contents, Lincoln, cordless grease gun, one 7.2 V rechargeable battery

172

Craftsman Tool Chests
includes all contents, hydraulic fittings, threading tools, socket sets, air attachments, punches, open end wrenches, files

173

Grinding Stand and Tools
1 hp 3 phase Electric Dr., plastic, mallets, wooden shelves, assorted 1 inch deep well sockets

174

Assorted Sockets and Tools
20” x 26” x 27” metal shelf, wire, brush stand, assorted, 1 inch sockets, air tools, sledgehammers, letter punches

175

Hydraulic Impact
110 V, 1 inch impact, or 2 1/2 inch impact, 1 1/2 inch impact, 10 foot hydraulic hose, all mounted on a rolling metal cart.

176

Threading Tools
Oster 2" pipe conduit in Bolton machine, NO. 655., Serial number WS1311. 148 inch rigid, pipe, wrench, rigid pipe threading tools

177

Oil Pans and Barrels
Two 12‘ x 3‘ x 8“ oil pans with walk grating, 15 barrels of hydraulic oil/actuator oil, 5‘ x 3‘ x 8‘ steel shelf, 23 inches between shelves

178

Evco Industrial Absorbent
Forty 40 lb. bags, two waste bins and buckets

179

Steal Shelves and Assorted Hydraulic Fittings
2’ x 6’ x 30” steel shelf, three 26“ x 20“ x 29“ steel shelves, assorted hydraulic heads, assorted hex screws, hydraulic fittings, and elbows

180

Steel Workbench and Welding Material
67“ x 3‘ x 35“ work table, 1 1/2 inch steel table surface, welding wire, rods, work stands, three jaw chuck rotating vice, 3’ x 18” x 42” metal cabinet, includes contents, 15” x 18” x 28” two drawer filing cabinet, includes all contents

181

Worthington Rotary Work Table
34" diameter, adjustable up to 90°, 2500 lbs. capacity, SN: 35288783

182

Miller Arc Welder
SN: HJ147417, steel cart, works

183

Miller Arc Welder
Steel cart, condition unknown, includes Miller wire feed, model gold star 400SS, SN: HJ194962

184

Linde Welder
Includes wire, feed, condition, unknown, type VI – 253, serial number B80C20217, 230/460 V three phase, 250 A. It includes wire grinder, three phase

185

Lincoln Electric Power Wave 455 Welder
Works, Steel cart, Lincoln electric wire feed, Miller cool mate 4. Welder code number 10872, serial number 01971004612. Wire feed code number 10438, serial number U1970809780. Cool mate stock number 042288, serial number KH370092

186

Miller Arc Welder
Condition unknown, steal cart, serial number HJ187616

187

Miller Synchro Wave 351 Arc Welder
Single phase, 17.4 kW, 200/230/460 V, 151/131/67 A, stock number 903219, serial number KD501710, steel cart, works good, Miller water mate stock number 042495, serial number KD472594

188

Welders and Sweeper
Linc welder DC 250MK , three phase 220 V, 32 A. Miller econtig 230 V, 52 A, single phase, stock number 903367, serial number KJ101312, condition unknown. Miller wire feed, and motorized metal floor sweeper, with 7 hp Briggs & Stratton, gas engine, 20" wide input

189

Steel Workbench and Contents
2' x 6' x 3' workbench, 14" chop grinder, includes all contents

190

4 Yard Trash Hopper
Includes steel shavings, 3" coasters

191

Factory Fans
A total of 20 fans, 3’ x 3’ box fan on wheels, all single phase with 110 plugs

192

Air Compressor
Cobalt 30 gallon, single phase compressor, good condition, 155 max psi, central pneumatic, 2 hp, 4 gallon compressor, and 115 max psi, puma 20 gallon tank and compressor no motor, 10 gallon tank air compressor

193

Metal Working Tools
20" x 26" x 32" metal cart, 34“ x 29“ x 44“ metal cabinet, number 18 N Jacob super ball bearing chuck, assorted lathe drill bits

194

Metal Working Tools
3‘ x 2‘ x 42“ metal cabinet, 3‘ x 2‘ x 7‘ metal cabinet, assorted shaper tools, whisper cutting heads/boring heads

195

Metal Working Tools
Assorted drill bits, boring bits, threading tools, tap and dye sets, two 21” x 16” x 3’ metal cabinets, two 25” x 18” x 3’ metal drawer sets

196

Thread Testing Sets
Assorted male and female thread testing units, various sizes, 3‘ x 24‘ x 31“ metal shelf, assorted plastic bore hole caps, 8’ x 16” x 8’ wooden shelf, includes all contents

197

Lockers with Contents
Assorted machine and lathing tools, 2‘ x 3‘ x 7‘ metal cabinet, 2‘ x 3‘ x 46“ wooden cabinet, 18“ x 3‘ x 6‘ metal shelf, 9’ x 12” x 66” lockers, 7’ x 18” x 6’ metal lockers, includes all contents, Milwaukee 1 1/4 super hole cutter with a Jacobs ball bearing super chuck number 20N, 3/8 to 1" capacity

198

Metal Working Tools
3‘ x 18“ x 70“ metal cabinet, assorted cutting/boring tools, three 15” x 21” x 34” metal cabinets, includes all contents

199

Metal Working Tools
6’ x 31” x 35” workbench, 4 1/2 inch bench base, assorted drill bits and threading tools, includes all contents

200

Metal Working Tools
Assorted drill bits, Jacob ball bearing super chucks, wedge type tool post and mounts 6‘ x 23 x 32“ workbench, includes all contents

201

Metal Working Tools
6' x 30" x 32" workbench, 26" x 20" x 32" metal cart, 18" x 35" x 60" wooden shelf, includes all contents, tool post attachments, assorted drill bits, brass scrap

202

Precision Tools
6' x 30" x 35" workbench, thickness gauges ranging from 1" to 28", calipers Rockwell hardness tester, boring gauge

203

Thread Testers and Brass
40" x 28" x 6' steel shelf, assorted thread testers, brass scrap, brass shavings

204

Work Benches and Assorted Tools
2-32" x 6' x 35" workbenches, drill bits, tool post attachments, metal tools, 5-26" x 22" x 32" metal shelves, 2-30" x 6' x 32" workbenches

205

Steel Shelf
10' x 3' x 8', includes all contents, grinding wheels, lathe chucks

206

Steel Cart
Includes all contents, 8' x 1 1/2" threaded rod, 3' x 4" stainless steel rod

207

Steel Cart
6' x 3' x 56", swiveling coasters, includes all contents

208

Steel Tree Rack
45" x 32" x 8' rack with seven sets of adjustable 12" arms, includes all contents, and surrounding content labeled, New 64" x 4 1/2" stainless steel rod, threaded rods

209

Steel Shelves
70" x 2' x 70", 12' x 2" x 70", includes all contents

210

Steel Rack and Contents
6' x 4' x 7' triangular rack with 12" arms, 52 1/4" x 4", 60" x 2 1/2", 70 1/2" x 2 1/2", 53" x 5 1/2", 66" x 1 1/4" stainless steel rods, 6", 4", 3 1/2", 3", 2 1/2", 2 1/4" steel pipe, hydraulic cylinder heads and ends

211

Steel Rack and Contents
3' x 92" x 9' rack with 32" arms, 168 3/4" x 7" , 236" x 6 1/2", 152" x 2 1/2", 93 1/2" x 5" stainless steel rods, includes all contents, 9" pipe

212

Steel Rods and Pipe
91" x 3 3/4", 58" x 7", 52 1/2" x 5 1/2", 171" x 4 1/4" stainless steel rods. 8", 9", 6", 6 1/2" steel pipe

213

Pallet Racking with Contents
6-3' x 10' legs, 25 pairs of 8" arms, approx. 150 organizing bins, includes all contents, steel rods, bolts, steel scrap

214

Steel Pipe and Tubing
Various sizes and lengths, 12" x 2"

215

Stainless Steel Rods
41 1/2" x 4 1/4", 42" x 7", 36" x 3 1/2", 29 1/2" x 3", 31 1/4" x 4, 43" x 2 3/4", 32 1/2" x 3 1/2", 44 1/4" x 3", stainless steel rods and other various sizes

216

5 Cubic Yard Hopper
With all contents, loaded with steel

217

Steel Rack with Content
3' x 31" x 78" steel rack with 14" arms, 6' x 4", 41" x 5", 74" x 18", 69 1/2" x 2 1/2, 52 1/4" x 4 1/4" 77" x 2 1/2" stainless steel rods, with other assorted stainless steel rods

218

Steel Carts
2-6' x 2' x 56" carts, 6" coasters, includes all stainless steel rods, boxes, and contents

219

12" x 12" Steel Springs
9 steel springs

220

Steel Rack
158" x 56" x 62" steel rack, includes all contents, 9 1/2" x 9 1/2" x 64" cylinder steel rods, steel couplings, assorted hydraulic cylinder parts

221

Paint Station
150" x 25" x 35" metal workbench, 2 filing cabinets, spray paints, includes metal wall rack 80" tall with 19" arms, includes all steel pipe, rods, and hydraulic cylinder, paint buckets, paper cutter, electric airless paint sprayer, letter punch, roll of plastic

222

Fuel Tank
4'x 2' x 2' fuel tank with hand pump, empty

223

Hydraulic Cylinder
16" x 53" reheat furnace pusher, T-2398MM, SN: 12305, rebuilt 11-21-11, 6" pin hole

224

Hydraulic and Air Cylinders
2-6" x 9" air cylinders, 3-6" x 4" air cylinders, 1-6" x 9" hydraulic cylinder

225

Hydraulic Cylinder
Bare and stroke, size unknown

226

Steel Pipe
Various sizes, 7" -22", incomplete hydraulic cylinder, brass scrap

227

Scrap Metal
40" x 28" x 5' steel rack, 163" x 4' x 8' steel rack, steel pipe, oil barrels

228

Scrap Metal
Stainless Steel rods, floor cleaners, barrels of shavings, steel scrap, broken metal working machine

229

Scrap Metal
International truck and trailer, includes contents on trailer stainless steel rods, air cylinder, steel pipes

230

Metal Scrap
Steel and brass shavings, 40 barrels, broken hydraulic cylinder

231

Stainless Steel Rod
172" x 20" diameter stainless steel rod

232

Stainless Steel Rods
2-118" x 6 1/2" stainless steel rods, 64" x 6 1/2", 56" x 6 1/2", 3- 106" x 12 1/2" stainless steel tubes, 104" x 21 1/2 steel tube, 8' x 16" steel tube

233

Scrap Metal
Broken air compressor, steel carts, steel rods, oil barrels

234

Scrap Metal
18' x 7' x 6' steel rack, stainless steel rods, electric motor, steel pipe, shavings, vending machine, 2 fuel tanks, hydraulic cylinder, Multi hydraulic and air cylinder

235

Scrap Metal
3-broken welders, 2 lathe parts, pallet of scrap steel, steel rings, 3 pallets hydraulic parts

236

Scrap Metal
Broken drill press, metal hoist, semi tires, 2-11R22.5 RLB400 double coin, assorted semi tires, 225-70R14 tires, hydraulic tank

237

Truck/Scrap Metal
5' x 4' x 3' dumpster, Chevy 1500 truck VIN: 1GCEC14V81EZ77010, condition unknown, stainless steel cylinder 44" x 10"

238

Bearings
36" x 18" x 64" drawer chest with assorted bearings

239

Bolt Bin
4-35" x 12" x 42' sections with assorted bolts, nuts, washers, and hex bolts

240

Bolt Bin
4-35" x 12" x 42' sections with assorted bolts, nuts, washers, and hex bolts

241

Parts Room
Assorted O-rings, grease fittings, machine tool teeth, machine tools, bolt bin with assorted bolts, nuts, bearings, grinding wheels, hydraulic heads, plastic seals, parts organizers, ball bearing pins, cotter key, snap rings

242

O-Rings and Filing Cabinet
Various sizes O-rings, oil seals, hydraulic valves, Polymite seals, Urethane seals

243

Drill and Tap Tools
3' x 18" x 6' cabinet, 2-26" x 12" x 12" tool chest, 29" x 20" x 16" tool chest various carbide teeth, brand new metal working tools, various drills, brand-new tap bits, carded mill drill, oxygen regulator gauge

244

Workbenches and Cabinets
6' x 3' x 3' metal workbench, 6' x 30' x 34" metal workbench includes all contents, parts organizer, 2-30" x 15" x 30" metal shelves, 5' x 3' x 30" wooden desk, 4' x 19" x 78" wooden cab, includes all contents and truck parts, 2 ton hoist

245

Carts and Rollers
3-2 wheel dollies, 2-welding carts, 5 sets of roller stands

246

Banding Carts
2 banding carts, 1/2 steel band, 1 1/4" steel band, includes tensioners

247

Power Washer, Ladders, and Brooms
12' extension ladder, 12' step ladder, 10' step ladder, 6' step ladder, Ex-cell 3200 psi power washer Honda GX340 11 hp

248

Office contents and Furniture
2 folding tables, refrigerator, working vending machine, break room chairs, microwaves, 10 office desks, 18 filing cabinets, computers, printers, office chairs

249

Scrap Steel
4 barrels of brass shavings, steel tubing, chunks, and lathe chucks

275

Hydraulic Pallet Jack
24" x 4 1/2" forks, battery powered hydraulic pump, 68" high capacity, push driven

276

Heavy Duty Forklift Cage
63" x 46" x 43"

277

Forklift Crane
Extendable from 5' to 10"

278

Forklift Crane
Extendable from 5' to 10"

279

Clark G Forklift
SN: CY70
Meter reads: 2,303 hours
Engine: 6 cylinder continental motor corp
Fuel type: LP
Load capacity: 7,000 lb
Stage mast: 2
Mast height: 70 1/2"
Side shift: No
Fork positioner: No
ROPS: Yes
Tire size: (front) 3.25-15 (rear) 7.00-12NHS
Tires: Pneumatic

Features and Notes: 47" x 4 1/2" forks. Needs new battery, hasn't been started in two years, 78" snow blade attachment. Sat inside.

280

Clark Lift C500 55 G Forklift
SN: 355 343 4046 778
Meter reads: 9,005 hours
Engine: 4 cylinder Clark
Fuel type: LP
Load capacity: 5,000 lb
Stage mast: 2
Mast height: 67 1/2"
Side shift: No
Fork positioner: No
ROPS: Yes
Tire size: 18 x 6 x 12 1/2
Tires: Solid

Features and Notes: 42" x 4" forks, hasn't been started in two years, needs new battery, sat inside.

281

Clark GCS30MB Forklift
SN: G138MB-1243-6961KOF
Meter reads: 4,393 hours
Engine: Clark 4 cylinder
Fuel type: LP
Load capacity: 6,000 lb
Stage mast: 2
Mast height: 80"
Side shift: No
Fork positioner: No
ROPS: Yes
Tires: Solid

Features and Notes: 57" x 5" forks. Hydraulic leak, kept inside, needs battery, no brakes, tank not included.

282

2007 GMC 2500 Pickup Truck
VIN: 1GTHC29U37E196489
Meter reads: 361,037 miles
Engine: 6.0L V8
Tires: 245/75R/16
Heat/AC: Yes

Features and Notes: New battery, 8' bed

283

2004 International 4000SE Semi Truck
VIN: 1HTMKAAN44H607315
Meter reads: 336,268 miles
Engine: International VT 365 diesel
Transmission: 6 speed
Tires: 11R22.5
Heat/AC: Yes

Features and Notes: New batteries, backup camera, 23' x 8' bed, removable wooden sides, air brakes

Photo Gallery

Share This Listing

Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Formerly Tri-Tech Engineering Liquidation (ONLINE ONLY)

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

3663 11th St.
Wyandotte, MI 48192

Tuesday Jul 18, 2023 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. Online purchase payments are due immediately upon receipt of your invoice. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Check out this complete metal fabrication shop online only liquidation auction! No Reserves on this equipment! Everything you would need to put you right into the metal fab business! 00 Information Lot HIGHLIGHT PIECES: Metal Lathes, Mills, Drill Presses, Grinders, Cranes, Saws, Welders, Forklifts, Trucks, and lots of parts and supplies! 01 Preview Information Access to the facility only on 7-17-2023 from 8 AM to 4 PM. Contact Daniel 574-612-0074. 02 Loadout Information Two day free loadout of smalls only on 7-19 to 7-20 from 8 AM to 4 PM. Contact Dan 574-612-0074 ahead of time to schedule time and lots to be loaded. Buyers will have 30 days to remove installed equipment by appointment only. Buyers are responsible for rigging and loadout of installed equipment with proof of liability Riggers: David Matz 574-255-3195 or Jon Davenport 260-437-4481 03 Payment Information Payment terms: 13% Buyers Premium. Cash, check, wire transfer. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. 04 Bright Star Auctions Die-Cast Metal 1:64 Scale Truck Replica Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 05 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 98 Heavy Equipment Key Set 36 Keys Shipping available for $20 99 Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 100 Monarch Metal Lathe 20 hp electric motor, three phase, 31 inch four jaw chuck, Dorian tool post, 176 inch bed. Includes 32 1/2" four jaw chuck, four mountable chucks, horizontal/vertical rotary table series 2 to 1, and a 12" three jaw chuck, electrical shut off. Catalog size and model 64NN, manufactured 1942, manufacturers number 7692, 36" actual swing, 20' x 6' x 7' overall size 101 Haverhill Metal Lathe 20 hp electric motor three phase 460 V, electrical shut off, 480 V General electric transformer, model: 9123B3883, 31 1/2" four jaw chuck, 4 1/2" hollowed spindle, 160" bed with 63" custom extension, wedge type tool post. Includes extra 31 1/2" four jaw chuck, steady rest with 24" inside measurement, steady rest with 12" inside measurement, number 20 Jacobs ball bearing super chuck 3/8 to 1" capacity, 110 V electric motor mounted to tool mount with a 24" extension sander, two prong lathe steady rest. 24" swing distance, manufacturers number 11055, 25' x 80" x 6' overall size 102 Sriov Lathe 20 hp electric drive, three phase, 20" inch four jaw spindle, 3 3/4" hollowed spindle, wedge type tool post, 109" bed. Includes steady rest with 12" inside measurement, steady rest with 9 1/2" inside measurement. Model 25 swing, SN: 2644/350. 25' x 6' x 6' overall size 103 Lucas 43B Precision Horizontal Mill 20 hp electric motor, three phase, electrical shut off, 7' x 42" adjustable mounting table, additional 3' x 3' x 1' rotating mounting table, ProTrak 102 CNC, Delta Corporation 2-021-00481, 21' x 11' x 11' overall size 104 Clausing Colchester 21 12 hp electric motor, three phase, 19 1/2" four jaw chuck, 135" bed, wedge type tool post. Includes additional 21" four jaw chuck, steady rest 9 1/2" inside measurement, steady rest 14 1/2" inside measurement. Number 18 N Jacobs ball bearing super chuck 1/8 to 3/4" capacity. 14" swing, 3 1/2" hollowed spindle, 184" x 4' x 6' overall size 105 Clausing Colchester 17 10 hp three phase electric motor, 15 3/4" four jaw chuck, 3" hollowed spindle, wedge type tool post. Includes 11" pipe mount, steady rest with 5" interior, measurement, steady rest with 7" interior measurement. 10" swing, 107" bed, 12' x 4' x 5' overall size 106 Monarch Metal Lathe 3 phase electric motor, 15 3/4" four jaw chuck, wedge, type tool post, 11" swing, 1 1/2" hollowed spindle. Includes steady rest 11" interior measurement, steady rest 6 1/2" interior measurement. 78" between center, catalog and model number 16" CW, manufacture is number 17053, manufactured 1942. 12' x 6' x 5' overall size 107 Boye & Emmes Metal Lathe 5 hp three phase electric motor, 10" four jaw chuck, 54" bed, wedge type tool post, 35" between centers, 11" swing. 14" lathe Number AA-46, 8' x 4' x 5' overall size. 109 Monarch Metal Lathe Three phase electric motor, 15 3/4" four jaw chuck, 78" bed, wedge type tool post, 60" between center, 11" swing. Catalog size and model 16"C. Actual swing 18 1/2", manufactures number 9565, manufactured in 1941. 110 Monarch Metal Lathe 15 hp three phase electric motor, 20" four jaw chuck, wedge type tool post, 82" bed, 22 1/2" actual swing, 48" between center, catalog size and model 20" M, manufacturers number 8941, manufactured in 1940, 12' x 5' x 6' overall size 111 HES Machine Lathe 15 hp 3 phase electric motor, 12" three jaw chuck, no tool post, 94" bed, 11" steady rest, carriage track is currently disassembled, type 550, SN: 15467, 11' x 3' x 5' overall size 112 Lux-Matter Metal Lathe 3 phase electric dr. 6 1/4" three jaw chuck, 1 1/2" hollowed spindles, 54" bed, which type tool post, 8" swing, 41" between centers, manufacturers number 971226, model FMT Dash 1500K, manufactured in 1997, 3' x 6' x 4' overall size 113 Select Gap Bed Metal Lathe 3 phase electric dr. 15 3/4" four jaw chuck, 100" bed, 20" swing, wedge, type tool post, 84" between center, steady rest 6" interior measurement, 11' x 4' x 5' overall size 114 TOS Metal Lathe Three phase electric dr. 10" three jaw chuck, 2" hollow spindle, 45" to center, 16" swing, 69" bed, 5" steady rest, wedge type tool post, additional 10", three jaw chuck, type SN40B, number 040100800121, 9' x 4' x 5' overall size. 116 Cincinnati Lathe/Grinder 3 phase, 1 ph electric drive on lathe and grinder, 8 1/4" four jaw chuck, 13" swing, 39 1/2" to centers, 10" x 1 1/2" grinder wheel, SN: 2U3D5A-1, 138" x 5' x 5' overall size 117 Ikeda RM1300 Radial Drill Press 3 phase electric dr., 360° swing radius, forward and reverse automated press down, rpm and depth speed is adjustable, 27 x 18 x 16 mounting table, 40" tall maximum capacity, no 20N Jacobs ball bearing super chuck 3/8 to 1" capacity, type RM1300, manufacturer number 77070, manufactured in 1977, 81" x 3' x 10' overall size 118 Bridgeport Drill Press 32" x 9" adjustable work surface, 22" tall maximum capacity, one hp three phase electric dr., with reversible sharpening attachment and dual head grinding stand. Includes Mitutoyo KA counter, model KA-12, SN: 7337451, Bridgeport SN: 70339, 4' x 5' x 7' overall size 119 Bridgeport Drill Press 1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, 1 hp 3 phase electric dr., includes SHARS SDS6-3V, adjustable vice, SN: J71026, 4' x 5' x 7' overall size 120 Bridgeport Drill Press 1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, SN: J29074, 4' x 5' x 7' overall size 121 Bridgeport Drill Press 1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, Includes a bridge port 15" rotary table SN: 3420, drill head is currently rotated 90°, drill SN: J-54599, 4' x 5' x 7' overall size 122 Jet Drill Press 3 hp 3 phase electric dr., 32" x 9" work surface, 8" Hartford rotary table with three jaw chuck, Mitutoyo KA counter model KA12, machine model number JTM-4VS, stock number 690182, SN: 501028, 5' x 5' x 7' overall size 123 Cincinnati Drill Press Currently disassembled some parts missing, includes service manual, and parts list catalog. 5 hp three phase electric dr., 15" x 64" adjustable work surface, model number three serial number for a 3P1U-13, 9' x 6' x 7' overall size 124 Clausing Drill Press 1.5 hp 3 phase electric dr., 24" x 40" work surface, includes four adjustable vices, 45" x 30" x 6' overall size 125 Hydraulic Press Ram pack hydraulics SN: 42298, 110 plug, 25" x 50" tall capacity 4' x 2' x 7' overall size 127 DoAll Grinder 8" x 39" work surface with 2 1/2" of vice, 6" grinding wheel, 1 1/4" arbor, model DH-612, SN: 138/651781, also includes additional grinder, condition unknown, some parts missing, 4' x 3' x 6' overall size of each grinder 128 DoAll Grinder 37" x 9" work surface, 6" grinding wheel, 1 1/4" arbor, 1 hp 3 phase electric dr. model G-1, SN: G 1-51912, 61" x 44" x 64" overall size 129 Cincinnati Grinding Stand, Ex-Cell-O Grinding Stand, and 12" Disc Sander Cincinnati Grinding Stand: 2 hp 3 phase electric dr.,1 1/2" x 8" grinding wheel 2" x 8" grinding wheel, SN: 225119, model 105, 2' x 2' x 4' overall size hitch. Ex-Cell-O Grinding Stand: Forwards and reverse, 1 1/2" x 8" grinding wheel, 1" arbor, 2' x 2' x 4' overall size. Sander: With 16" x 7" work surface, 21 1/2" belt sander, three phase, 2' x 2' x 3' 132 DoAll Band Saw 3 phase electric dr., 2' x 2' tiltable, work surface, 8" tall capacity, 1 1/2" x 16" band wheels, model M-L, SN: 521-7375, 3' x 40" x 76" overall size 133 Gould and Everharot 36" Industrial Shaper 15 hp 3 phase electric dr. 16" vise, 36" x 18" adjustable work surface, 10' x 53" x 6' overall size 134 HEM Horizontal Metal Saw 5 hp 3 phase electric dr., 20' x 28" skate roll in feed, 10' x 25" skate roll out feed, 24" x 3 1/2" steel rolls, 6 1/2" on center, 1 1/2 x 18" band wheels, two used and two new cutting bands, length vice, built-in hydraulics for raising arm, model 1200LM, SN: 97279, 32' x 8' x 5' overall size 135 Missile Hydraulic Tester 3 phase electric dr., 2000 max psi, 2GPM, max flow, retractable hydraulic hose connectors, manual locking hydraulic valve, AS tech euro press, additional male 1/2" hydraulic quick connectors, SN: 1198, Model XM14, 5' x 32" x 38" in overall size, 4" plastic coasters 136 Hydraulic Pack 10 hp three phase electric dr., 1 1/2" hydraulic quick connectors with 14" of hose, manual locking hydraulic valve, 62" x 30" x 20" tank, male 1 1/2" quick connectors and fittings, additional hose and valve, 62" x 33" x 4' overall size 137 Detroit Air Compressor 20 hp 3 phase electric Dr., Worthington pump, SN: 876-1174, pump size 6/6/4 1/2 x 2 3/4, unit SN 710310X, 6' x 2' tank, no air lines included, 6' x 2' x 7' overall size, includes breaker box 138 Air Compressor 5 hp 3 phase electric dr., Quincy compressor model: 325-10, SN: 464181L, 5' x 20" tank, 6' x 2' x 77" overall size, includes all airlines in facility 139 2 Ton Overhead Crane 80" long I-Beam track, 1 ton Yale spur geared block hoist mounted on 25' crossmember I-beam, 14' I-beam support legs, includes one barrel of tow straps 140 2 Ton Overhead Crane Approximately 80 foot long I-beam track, 2 ton Yale hoist mounted on 20 foot I-beam, 2 ton WRIGHT hoist mounted on 20 foot I-beam track, includes one barrel of tow straps, no support legs, track is mounted directly to ceiling 141 Kone 5 Ton Overhead Crane Three phase MGM transformer, 480 V, KONE XL300 5 ton hoist, approximately 62 feet long I-beam track, and 35 foot crossmember, I-beam, and includes twelve 115 inch tall leg support I-beams below track, serial number 5820836 160 Stainless Steel Rod New still in cardboard, 177“ x 4 3/4" 161 Stainless Steel Rod New still in cardboard, 190” x 4 1/2" 162 Stainless Steel Rod New still in cardboard, 184 1/2“ x 3 7/8" 162A Steel Rack with Stainless Steel Rods All rods are included except for the rods for lot # 160, 161, and 162, rod measurements are 20‘ x 2 1/4", 75 3/8" x 4 1/4", 83 1/2“ x 3“, 20‘ x 2“, 89 1/4“ x 1 3/8“, 68“ x 1“, 167 1/2“ x 3“, 82 1/2” x 3 1/4”, 69 1/2” x 1”, 8‘ x 32“ x 81’ material rack, seven sets of 12 inch adjustable arms 163 Stainless Steel Rod 236" x 6 3/4" 164 Stainless Steel Rod 37 5/8“ x 12 1/8“ 165 Stainless Steel Rod 77 1/2“ x 8 1/2“, 73“ x 5 and three eights inches, 82“ x 3“, 69“ x 1 1/8“, 69“ x 1 1/8“, 53 1/2“ x 2“, 41“ x 4 1/4“ 166 Stainless Steel Rod and Rack 61 1/2“ x 6 7/8“, 47“ x 2 3/4“, 47“ x 2 3/4“, 55 1/2“ x 3“, 61 1/2" x 7", 61 1/2“ x 7“, 52“ x 4 5/8", 44 1/2“ x 2“, 47 1/2“ x 2 3/4“ stainless steel rods, 16‘ x 3‘ x 30“ steel rack 167 Steel Workbench 136” x 42” x 35 1/2”, three rigid pipe vices 168 Steel Workbench 68“ x 36“ x 35“, one rigid pipe vise, includes all contents, wrench set 169 Steel Workbench 68” x 36” x 35”, one rigid pipe vise, 6 inch Wilton bench vice, 13 inch punch press, includes all contents 170 Steel Workbench 68“ x 36“ x 35“, two rigid pipe vise, two 50 foot cords, includes all contents 171 Tools and Workbench Seven drawer craftsman tool bench, wooden tool, bench, filing cabinet, storage cupboard, power team hydraulic jack gear puller, half inch and three-quarter inch torque wrench, 1 inch ratchet, includes all contents, Lincoln, cordless grease gun, one 7.2 V rechargeable battery 172 Craftsman Tool Chests includes all contents, hydraulic fittings, threading tools, socket sets, air attachments, punches, open end wrenches, files 173 Grinding Stand and Tools 1 hp 3 phase Electric Dr., plastic, mallets, wooden shelves, assorted 1 inch deep well sockets 174 Assorted Sockets and Tools 20” x 26” x 27” metal shelf, wire, brush stand, assorted, 1 inch sockets, air tools, sledgehammers, letter punches 175 Hydraulic Impact 110 V, 1 inch impact, or 2 1/2 inch impact, 1 1/2 inch impact, 10 foot hydraulic hose, all mounted on a rolling metal cart. 176 Threading Tools Oster 2" pipe conduit in Bolton machine, NO. 655., Serial number WS1311. 148 inch rigid, pipe, wrench, rigid pipe threading tools 177 Oil Pans and Barrels Two 12‘ x 3‘ x 8“ oil pans with walk grating, 15 barrels of hydraulic oil/actuator oil, 5‘ x 3‘ x 8‘ steel shelf, 23 inches between shelves 178 Evco Industrial Absorbent Forty 40 lb. bags, two waste bins and buckets 179 Steal Shelves and Assorted Hydraulic Fittings 2’ x 6’ x 30” steel shelf, three 26“ x 20“ x 29“ steel shelves, assorted hydraulic heads, assorted hex screws, hydraulic fittings, and elbows 180 Steel Workbench and Welding Material 67“ x 3‘ x 35“ work table, 1 1/2 inch steel table surface, welding wire, rods, work stands, three jaw chuck rotating vice, 3’ x 18” x 42” metal cabinet, includes contents, 15” x 18” x 28” two drawer filing cabinet, includes all contents 181 Worthington Rotary Work Table 34" diameter, adjustable up to 90°, 2500 lbs. capacity, SN: 35288783 182 Miller Arc Welder SN: HJ147417, steel cart, works 183 Miller Arc Welder Steel cart, condition unknown, includes Miller wire feed, model gold star 400SS, SN: HJ194962 184 Linde Welder Includes wire, feed, condition, unknown, type VI – 253, serial number B80C20217, 230/460 V three phase, 250 A. It includes wire grinder, three phase 185 Lincoln Electric Power Wave 455 Welder Works, Steel cart, Lincoln electric wire feed, Miller cool mate 4. Welder code number 10872, serial number 01971004612. Wire feed code number 10438, serial number U1970809780. Cool mate stock number 042288, serial number KH370092 186 Miller Arc Welder Condition unknown, steal cart, serial number HJ187616 187 Miller Synchro Wave 351 Arc Welder Single phase, 17.4 kW, 200/230/460 V, 151/131/67 A, stock number 903219, serial number KD501710, steel cart, works good, Miller water mate stock number 042495, serial number KD472594 188 Welders and Sweeper Linc welder DC 250MK , three phase 220 V, 32 A. Miller econtig 230 V, 52 A, single phase, stock number 903367, serial number KJ101312, condition unknown. Miller wire feed, and motorized metal floor sweeper, with 7 hp Briggs & Stratton, gas engine, 20" wide input 189 Steel Workbench and Contents 2' x 6' x 3' workbench, 14" chop grinder, includes all contents 190 4 Yard Trash Hopper Includes steel shavings, 3" coasters 191 Factory Fans A total of 20 fans, 3’ x 3’ box fan on wheels, all single phase with 110 plugs 192 Air Compressor Cobalt 30 gallon, single phase compressor, good condition, 155 max psi, central pneumatic, 2 hp, 4 gallon compressor, and 115 max psi, puma 20 gallon tank and compressor no motor, 10 gallon tank air compressor 193 Metal Working Tools 20" x 26" x 32" metal cart, 34“ x 29“ x 44“ metal cabinet, number 18 N Jacob super ball bearing chuck, assorted lathe drill bits 194 Metal Working Tools 3‘ x 2‘ x 42“ metal cabinet, 3‘ x 2‘ x 7‘ metal cabinet, assorted shaper tools, whisper cutting heads/boring heads 195 Metal Working Tools Assorted drill bits, boring bits, threading tools, tap and dye sets, two 21” x 16” x 3’ metal cabinets, two 25” x 18” x 3’ metal drawer sets 196 Thread Testing Sets Assorted male and female thread testing units, various sizes, 3‘ x 24‘ x 31“ metal shelf, assorted plastic bore hole caps, 8’ x 16” x 8’ wooden shelf, includes all contents 197 Lockers with Contents Assorted machine and lathing tools, 2‘ x 3‘ x 7‘ metal cabinet, 2‘ x 3‘ x 46“ wooden cabinet, 18“ x 3‘ x 6‘ metal shelf, 9’ x 12” x 66” lockers, 7’ x 18” x 6’ metal lockers, includes all contents, Milwaukee 1 1/4 super hole cutter with a Jacobs ball bearing super chuck number 20N, 3/8 to 1" capacity 198 Metal Working Tools 3‘ x 18“ x 70“ metal cabinet, assorted cutting/boring tools, three 15” x 21” x 34” metal cabinets, includes all contents 199 Metal Working Tools 6’ x 31” x 35” workbench, 4 1/2 inch bench base, assorted drill bits and threading tools, includes all contents 200 Metal Working Tools Assorted drill bits, Jacob ball bearing super chucks, wedge type tool post and mounts 6‘ x 23 x 32“ workbench, includes all contents 201 Metal Working Tools 6' x 30" x 32" workbench, 26" x 20" x 32" metal cart, 18" x 35" x 60" wooden shelf, includes all contents, tool post attachments, assorted drill bits, brass scrap 202 Precision Tools 6' x 30" x 35" workbench, thickness gauges ranging from 1" to 28", calipers Rockwell hardness tester, boring gauge 203 Thread Testers and Brass 40" x 28" x 6' steel shelf, assorted thread testers, brass scrap, brass shavings 204 Work Benches and Assorted Tools 2-32" x 6' x 35" workbenches, drill bits, tool post attachments, metal tools, 5-26" x 22" x 32" metal shelves, 2-30" x 6' x 32" workbenches 205 Steel Shelf 10' x 3' x 8', includes all contents, grinding wheels, lathe chucks 206 Steel Cart Includes all contents, 8' x 1 1/2" threaded rod, 3' x 4" stainless steel rod 207 Steel Cart 6' x 3' x 56", swiveling coasters, includes all contents 208 Steel Tree Rack 45" x 32" x 8' rack with seven sets of adjustable 12" arms, includes all contents, and surrounding content labeled, New 64" x 4 1/2" stainless steel rod, threaded rods 209 Steel Shelves 70" x 2' x 70", 12' x 2" x 70", includes all contents 210 Steel Rack and Contents 6' x 4' x 7' triangular rack with 12" arms, 52 1/4" x 4", 60" x 2 1/2", 70 1/2" x 2 1/2", 53" x 5 1/2", 66" x 1 1/4" stainless steel rods, 6", 4", 3 1/2", 3", 2 1/2", 2 1/4" steel pipe, hydraulic cylinder heads and ends 211 Steel Rack and Contents 3' x 92" x 9' rack with 32" arms, 168 3/4" x 7" , 236" x 6 1/2", 152" x 2 1/2", 93 1/2" x 5" stainless steel rods, includes all contents, 9" pipe 212 Steel Rods and Pipe 91" x 3 3/4", 58" x 7", 52 1/2" x 5 1/2", 171" x 4 1/4" stainless steel rods. 8", 9", 6", 6 1/2" steel pipe 213 Pallet Racking with Contents 6-3' x 10' legs, 25 pairs of 8" arms, approx. 150 organizing bins, includes all contents, steel rods, bolts, steel scrap 214 Steel Pipe and Tubing Various sizes and lengths, 12" x 2" 215 Stainless Steel Rods 41 1/2" x 4 1/4", 42" x 7", 36" x 3 1/2", 29 1/2" x 3", 31 1/4" x 4, 43" x 2 3/4", 32 1/2" x 3 1/2", 44 1/4" x 3", stainless steel rods and other various sizes 216 5 Cubic Yard Hopper With all contents, loaded with steel 217 Steel Rack with Content 3' x 31" x 78" steel rack with 14" arms, 6' x 4", 41" x 5", 74" x 18", 69 1/2" x 2 1/2, 52 1/4" x 4 1/4" 77" x 2 1/2" stainless steel rods, with other assorted stainless steel rods 218 Steel Carts 2-6' x 2' x 56" carts, 6" coasters, includes all stainless steel rods, boxes, and contents 219 12" x 12" Steel Springs 9 steel springs 220 Steel Rack 158" x 56" x 62" steel rack, includes all contents, 9 1/2" x 9 1/2" x 64" cylinder steel rods, steel couplings, assorted hydraulic cylinder parts 221 Paint Station 150" x 25" x 35" metal workbench, 2 filing cabinets, spray paints, includes metal wall rack 80" tall with 19" arms, includes all steel pipe, rods, and hydraulic cylinder, paint buckets, paper cutter, electric airless paint sprayer, letter punch, roll of plastic 222 Fuel Tank 4'x 2' x 2' fuel tank with hand pump, empty 223 Hydraulic Cylinder 16" x 53" reheat furnace pusher, T-2398MM, SN: 12305, rebuilt 11-21-11, 6" pin hole 224 Hydraulic and Air Cylinders 2-6" x 9" air cylinders, 3-6" x 4" air cylinders, 1-6" x 9" hydraulic cylinder 225 Hydraulic Cylinder Bare and stroke, size unknown 226 Steel Pipe Various sizes, 7" -22", incomplete hydraulic cylinder, brass scrap 227 Scrap Metal 40" x 28" x 5' steel rack, 163" x 4' x 8' steel rack, steel pipe, oil barrels 228 Scrap Metal Stainless Steel rods, floor cleaners, barrels of shavings, steel scrap, broken metal working machine 229 Scrap Metal International truck and trailer, includes contents on trailer stainless steel rods, air cylinder, steel pipes 230 Metal Scrap Steel and brass shavings, 40 barrels, broken hydraulic cylinder 231 Stainless Steel Rod 172" x 20" diameter stainless steel rod 232 Stainless Steel Rods 2-118" x 6 1/2" stainless steel rods, 64" x 6 1/2", 56" x 6 1/2", 3- 106" x 12 1/2" stainless steel tubes, 104" x 21 1/2 steel tube, 8' x 16" steel tube 233 Scrap Metal Broken air compressor, steel carts, steel rods, oil barrels 234 Scrap Metal 18' x 7' x 6' steel rack, stainless steel rods, electric motor, steel pipe, shavings, vending machine, 2 fuel tanks, hydraulic cylinder, Multi hydraulic and air cylinder 235 Scrap Metal 3-broken welders, 2 lathe parts, pallet of scrap steel, steel rings, 3 pallets hydraulic parts 236 Scrap Metal Broken drill press, metal hoist, semi tires, 2-11R22.5 RLB400 double coin, assorted semi tires, 225-70R14 tires, hydraulic tank 237 Truck/Scrap Metal 5' x 4' x 3' dumpster, Chevy 1500 truck VIN: 1GCEC14V81EZ77010, condition unknown, stainless steel cylinder 44" x 10" 238 Bearings 36" x 18" x 64" drawer chest with assorted bearings 239 Bolt Bin 4-35" x 12" x 42' sections with assorted bolts, nuts, washers, and hex bolts 240 Bolt Bin 4-35" x 12" x 42' sections with assorted bolts, nuts, washers, and hex bolts 241 Parts Room Assorted O-rings, grease fittings, machine tool teeth, machine tools, bolt bin with assorted bolts, nuts, bearings, grinding wheels, hydraulic heads, plastic seals, parts organizers, ball bearing pins, cotter key, snap rings 242 O-Rings and Filing Cabinet Various sizes O-rings, oil seals, hydraulic valves, Polymite seals, Urethane seals 243 Drill and Tap Tools 3' x 18" x 6' cabinet, 2-26" x 12" x 12" tool chest, 29" x 20" x 16" tool chest various carbide teeth, brand new metal working tools, various drills, brand-new tap bits, carded mill drill, oxygen regulator gauge 244 Workbenches and Cabinets 6' x 3' x 3' metal workbench, 6' x 30' x 34" metal workbench includes all contents, parts organizer, 2-30" x 15" x 30" metal shelves, 5' x 3' x 30" wooden desk, 4' x 19" x 78" wooden cab, includes all contents and truck parts, 2 ton hoist 245 Carts and Rollers 3-2 wheel dollies, 2-welding carts, 5 sets of roller stands 246 Banding Carts 2 banding carts, 1/2 steel band, 1 1/4" steel band, includes tensioners 247 Power Washer, Ladders, and Brooms 12' extension ladder, 12' step ladder, 10' step ladder, 6' step ladder, Ex-cell 3200 psi power washer Honda GX340 11 hp 248 Office contents and Furniture 2 folding tables, refrigerator, working vending machine, break room chairs, microwaves, 10 office desks, 18 filing cabinets, computers, printers, office chairs 249 Scrap Steel 4 barrels of brass shavings, steel tubing, chunks, and lathe chucks 275 Hydraulic Pallet Jack 24" x 4 1/2" forks, battery powered hydraulic pump, 68" high capacity, push driven 276 Heavy Duty Forklift Cage 63" x 46" x 43" 277 Forklift Crane Extendable from 5' to 10" 278 Forklift Crane Extendable from 5' to 10" 279 Clark G Forklift SN: CY70 Meter reads: 2,303 hours Engine: 6 cylinder continental motor corp Fuel type: LP Load capacity: 7,000 lb Stage mast: 2 Mast height: 70 1/2" Side shift: No Fork positioner: No ROPS: Yes Tire size: (front) 3.25-15 (rear) 7.00-12NHS Tires: Pneumatic Features and Notes: 47" x 4 1/2" forks. Needs new battery, hasn't been started in two years, 78" snow blade attachment. Sat inside. 280 Clark Lift C500 55 G Forklift SN: 355 343 4046 778 Meter reads: 9,005 hours Engine: 4 cylinder Clark Fuel type: LP Load capacity: 5,000 lb Stage mast: 2 Mast height: 67 1/2" Side shift: No Fork positioner: No ROPS: Yes Tire size: 18 x 6 x 12 1/2 Tires: Solid Features and Notes: 42" x 4" forks, hasn't been started in two years, needs new battery, sat inside. 281 Clark GCS30MB Forklift SN: G138MB-1243-6961KOF Meter reads: 4,393 hours Engine: Clark 4 cylinder Fuel type: LP Load capacity: 6,000 lb Stage mast: 2 Mast height: 80" Side shift: No Fork positioner: No ROPS: Yes Tires: Solid Features and Notes: 57" x 5" forks. Hydraulic leak, kept inside, needs battery, no brakes, tank not included. 282 2007 GMC 2500 Pickup Truck VIN: 1GTHC29U37E196489 Meter reads: 361,037 miles Engine: 6.0L V8 Tires: 245/75R/16 Heat/AC: Yes Features and Notes: New battery, 8' bed 283 2004 International 4000SE Semi Truck VIN: 1HTMKAAN44H607315 Meter reads: 336,268 miles Engine: International VT 365 diesel Transmission: 6 speed Tires: 11R22.5 Heat/AC: Yes Features and Notes: New batteries, backup camera, 23' x 8' bed, removable wooden sides, air brakes

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Formerly Tri-Tech Engineering Liquidation (ONLINE ONLY)

Live Auction

View Gallery (145)

Auction Date(s)

Tuesday Jul 18, 2023 Completed

Auction Location

Wyandotte, MI 48192

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
9. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
10. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
11. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
12. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
13. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. Online purchase payments are due immediately upon receipt of your invoice. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Check out this complete metal fabrication shop online only liquidation auction! No Reserves on this equipment! Everything you would need to put you right into the metal fab business!

Information Lot
HIGHLIGHT PIECES: Metal Lathes, Mills, Drill Presses, Grinders, Cranes, Saws, Welders, Forklifts, Trucks, and lots of parts and supplies!

Preview Information
Access to the facility only on 7-17-2023 from 8 AM to 4 PM. Contact Daniel 574-612-0074.

Heavy Equipment Key Set 36 Keys
Shipping available for $20

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

100

101

102

103

104

105

106

107

Boye & Emmes Metal Lathe
5 hp three phase electric motor, 10" four jaw chuck, 54" bed, wedge type tool post, 35" between centers, 11" swing. 14" lathe Number AA-46, 8' x 4' x 5' overall size.

109

110

111

112

113

114

116

117

118

119

120

Bridgeport Drill Press
1 hp three phase electric dr., 32" x 9" adjustable work surface, 22" tall maximum capacity, SN: J29074, 4' x 5' x 7' overall size

121

122

123

124

Clausing Drill Press
1.5 hp 3 phase electric dr., 24" x 40" work surface, includes four adjustable vices, 45" x 30" x 6' overall size

125

Hydraulic Press
Ram pack hydraulics SN: 42298, 110 plug, 25" x 50" tall capacity 4' x 2' x 7' overall size

127

128

DoAll Grinder
37" x 9" work surface, 6" grinding wheel, 1 1/4" arbor, 1 hp 3 phase electric dr. model G-1, SN: G 1-51912, 61" x 44" x 64" overall size

129

132

DoAll Band Saw
3 phase electric dr., 2' x 2' tiltable, work surface, 8" tall capacity, 1 1/2" x 16" band wheels, model M-L, SN: 521-7375, 3' x 40" x 76" overall size

133

Gould and Everharot 36" Industrial Shaper
15 hp 3 phase electric dr. 16" vise, 36" x 18" adjustable work surface, 10' x 53" x 6' overall size

134

135

136

137

138

Air Compressor
5 hp 3 phase electric dr., Quincy compressor model: 325-10, SN: 464181L, 5' x 20" tank, 6' x 2' x 77" overall size, includes all airlines in facility

139

2 Ton Overhead Crane
80" long I-Beam track, 1 ton Yale spur geared block hoist mounted on 25' crossmember I-beam, 14' I-beam support legs, includes one barrel of tow straps

140

141

160

Stainless Steel Rod
New still in cardboard, 177“ x 4 3/4"

161

Stainless Steel Rod
New still in cardboard, 190” x 4 1/2"

162

Stainless Steel Rod
New still in cardboard, 184 1/2“ x 3 7/8"

162A

163

Stainless Steel Rod
236" x 6 3/4"

164

Stainless Steel Rod
37 5/8“ x 12 1/8“

165

Stainless Steel Rod
77 1/2“ x 8 1/2“, 73“ x 5 and three eights inches, 82“ x 3“, 69“ x 1 1/8“, 69“ x 1 1/8“, 53 1/2“ x 2“, 41“ x 4 1/4“

166

167

Steel Workbench
136” x 42” x 35 1/2”, three rigid pipe vices

168

Steel Workbench
68“ x 36“ x 35“, one rigid pipe vise, includes all contents, wrench set

169

Steel Workbench
68” x 36” x 35”, one rigid pipe vise, 6 inch Wilton bench vice, 13 inch punch press, includes all contents

170

Steel Workbench
68“ x 36“ x 35“, two rigid pipe vise, two 50 foot cords, includes all contents

171

172

Craftsman Tool Chests
includes all contents, hydraulic fittings, threading tools, socket sets, air attachments, punches, open end wrenches, files

173

Grinding Stand and Tools
1 hp 3 phase Electric Dr., plastic, mallets, wooden shelves, assorted 1 inch deep well sockets

174

Assorted Sockets and Tools
20” x 26” x 27” metal shelf, wire, brush stand, assorted, 1 inch sockets, air tools, sledgehammers, letter punches

175

Hydraulic Impact
110 V, 1 inch impact, or 2 1/2 inch impact, 1 1/2 inch impact, 10 foot hydraulic hose, all mounted on a rolling metal cart.

176

Threading Tools
Oster 2" pipe conduit in Bolton machine, NO. 655., Serial number WS1311. 148 inch rigid, pipe, wrench, rigid pipe threading tools

177

Oil Pans and Barrels
Two 12‘ x 3‘ x 8“ oil pans with walk grating, 15 barrels of hydraulic oil/actuator oil, 5‘ x 3‘ x 8‘ steel shelf, 23 inches between shelves

178

Evco Industrial Absorbent
Forty 40 lb. bags, two waste bins and buckets

179

180

181

Worthington Rotary Work Table
34" diameter, adjustable up to 90°, 2500 lbs. capacity, SN: 35288783

182

Miller Arc Welder
SN: HJ147417, steel cart, works

183

Miller Arc Welder
Steel cart, condition unknown, includes Miller wire feed, model gold star 400SS, SN: HJ194962

184

Linde Welder
Includes wire, feed, condition, unknown, type VI – 253, serial number B80C20217, 230/460 V three phase, 250 A. It includes wire grinder, three phase

185

186

Miller Arc Welder
Condition unknown, steal cart, serial number HJ187616

187

188

189

Steel Workbench and Contents
2' x 6' x 3' workbench, 14" chop grinder, includes all contents

190

4 Yard Trash Hopper
Includes steel shavings, 3" coasters

191

Factory Fans
A total of 20 fans, 3’ x 3’ box fan on wheels, all single phase with 110 plugs

192

193

Metal Working Tools
20" x 26" x 32" metal cart, 34“ x 29“ x 44“ metal cabinet, number 18 N Jacob super ball bearing chuck, assorted lathe drill bits

194

Metal Working Tools
3‘ x 2‘ x 42“ metal cabinet, 3‘ x 2‘ x 7‘ metal cabinet, assorted shaper tools, whisper cutting heads/boring heads

195

Metal Working Tools
Assorted drill bits, boring bits, threading tools, tap and dye sets, two 21” x 16” x 3’ metal cabinets, two 25” x 18” x 3’ metal drawer sets

196

197

198

Metal Working Tools
3‘ x 18“ x 70“ metal cabinet, assorted cutting/boring tools, three 15” x 21” x 34” metal cabinets, includes all contents

199

Metal Working Tools
6’ x 31” x 35” workbench, 4 1/2 inch bench base, assorted drill bits and threading tools, includes all contents

200

Metal Working Tools
Assorted drill bits, Jacob ball bearing super chucks, wedge type tool post and mounts 6‘ x 23 x 32“ workbench, includes all contents

201

Metal Working Tools
6' x 30" x 32" workbench, 26" x 20" x 32" metal cart, 18" x 35" x 60" wooden shelf, includes all contents, tool post attachments, assorted drill bits, brass scrap

202

Precision Tools
6' x 30" x 35" workbench, thickness gauges ranging from 1" to 28", calipers Rockwell hardness tester, boring gauge

203

Thread Testers and Brass
40" x 28" x 6' steel shelf, assorted thread testers, brass scrap, brass shavings

204

Work Benches and Assorted Tools
2-32" x 6' x 35" workbenches, drill bits, tool post attachments, metal tools, 5-26" x 22" x 32" metal shelves, 2-30" x 6' x 32" workbenches

205

Steel Shelf
10' x 3' x 8', includes all contents, grinding wheels, lathe chucks

206

Steel Cart
Includes all contents, 8' x 1 1/2" threaded rod, 3' x 4" stainless steel rod

207

Steel Cart
6' x 3' x 56", swiveling coasters, includes all contents

208

Steel Tree Rack
45" x 32" x 8' rack with seven sets of adjustable 12" arms, includes all contents, and surrounding content labeled, New 64" x 4 1/2" stainless steel rod, threaded rods

209

Steel Shelves
70" x 2' x 70", 12' x 2" x 70", includes all contents

210

211

Steel Rack and Contents
3' x 92" x 9' rack with 32" arms, 168 3/4" x 7" , 236" x 6 1/2", 152" x 2 1/2", 93 1/2" x 5" stainless steel rods, includes all contents, 9" pipe

212

Steel Rods and Pipe
91" x 3 3/4", 58" x 7", 52 1/2" x 5 1/2", 171" x 4 1/4" stainless steel rods. 8", 9", 6", 6 1/2" steel pipe

213

Pallet Racking with Contents
6-3' x 10' legs, 25 pairs of 8" arms, approx. 150 organizing bins, includes all contents, steel rods, bolts, steel scrap

214

Steel Pipe and Tubing
Various sizes and lengths, 12" x 2"

215

Stainless Steel Rods
41 1/2" x 4 1/4", 42" x 7", 36" x 3 1/2", 29 1/2" x 3", 31 1/4" x 4, 43" x 2 3/4", 32 1/2" x 3 1/2", 44 1/4" x 3", stainless steel rods and other various sizes

216

5 Cubic Yard Hopper
With all contents, loaded with steel

217

218

Steel Carts
2-6' x 2' x 56" carts, 6" coasters, includes all stainless steel rods, boxes, and contents

219

12" x 12" Steel Springs
9 steel springs

220

Steel Rack
158" x 56" x 62" steel rack, includes all contents, 9 1/2" x 9 1/2" x 64" cylinder steel rods, steel couplings, assorted hydraulic cylinder parts

221

222

Fuel Tank
4'x 2' x 2' fuel tank with hand pump, empty

223

Hydraulic Cylinder
16" x 53" reheat furnace pusher, T-2398MM, SN: 12305, rebuilt 11-21-11, 6" pin hole

224

Hydraulic and Air Cylinders
2-6" x 9" air cylinders, 3-6" x 4" air cylinders, 1-6" x 9" hydraulic cylinder

225

Hydraulic Cylinder
Bare and stroke, size unknown

226

Steel Pipe
Various sizes, 7" -22", incomplete hydraulic cylinder, brass scrap

227

Scrap Metal
40" x 28" x 5' steel rack, 163" x 4' x 8' steel rack, steel pipe, oil barrels

228

Scrap Metal
Stainless Steel rods, floor cleaners, barrels of shavings, steel scrap, broken metal working machine

229

Scrap Metal
International truck and trailer, includes contents on trailer stainless steel rods, air cylinder, steel pipes

230

Metal Scrap
Steel and brass shavings, 40 barrels, broken hydraulic cylinder

231

Stainless Steel Rod
172" x 20" diameter stainless steel rod

232

Stainless Steel Rods
2-118" x 6 1/2" stainless steel rods, 64" x 6 1/2", 56" x 6 1/2", 3- 106" x 12 1/2" stainless steel tubes, 104" x 21 1/2 steel tube, 8' x 16" steel tube

233

Scrap Metal
Broken air compressor, steel carts, steel rods, oil barrels

234

Scrap Metal
18' x 7' x 6' steel rack, stainless steel rods, electric motor, steel pipe, shavings, vending machine, 2 fuel tanks, hydraulic cylinder, Multi hydraulic and air cylinder

235

Scrap Metal
3-broken welders, 2 lathe parts, pallet of scrap steel, steel rings, 3 pallets hydraulic parts

236

Scrap Metal
Broken drill press, metal hoist, semi tires, 2-11R22.5 RLB400 double coin, assorted semi tires, 225-70R14 tires, hydraulic tank

237

Truck/Scrap Metal
5' x 4' x 3' dumpster, Chevy 1500 truck VIN: 1GCEC14V81EZ77010, condition unknown, stainless steel cylinder 44" x 10"

238

Bearings
36" x 18" x 64" drawer chest with assorted bearings

239

Bolt Bin
4-35" x 12" x 42' sections with assorted bolts, nuts, washers, and hex bolts

240

Bolt Bin
4-35" x 12" x 42' sections with assorted bolts, nuts, washers, and hex bolts

241

242

O-Rings and Filing Cabinet
Various sizes O-rings, oil seals, hydraulic valves, Polymite seals, Urethane seals

243

244

245

Carts and Rollers
3-2 wheel dollies, 2-welding carts, 5 sets of roller stands

246

Banding Carts
2 banding carts, 1/2 steel band, 1 1/4" steel band, includes tensioners

247

Power Washer, Ladders, and Brooms
12' extension ladder, 12' step ladder, 10' step ladder, 6' step ladder, Ex-cell 3200 psi power washer Honda GX340 11 hp

248

Office contents and Furniture
2 folding tables, refrigerator, working vending machine, break room chairs, microwaves, 10 office desks, 18 filing cabinets, computers, printers, office chairs

249

Scrap Steel
4 barrels of brass shavings, steel tubing, chunks, and lathe chucks

275

Hydraulic Pallet Jack
24" x 4 1/2" forks, battery powered hydraulic pump, 68" high capacity, push driven

276

Heavy Duty Forklift Cage
63" x 46" x 43"

277

Forklift Crane
Extendable from 5' to 10"

278

Forklift Crane
Extendable from 5' to 10"

279

280

281

282

2007 GMC 2500 Pickup Truck
VIN: 1GTHC29U37E196489
Meter reads: 361,037 miles
Engine: 6.0L V8
Tires: 245/75R/16
Heat/AC: Yes

Features and Notes: New battery, 8' bed

283

Formerly Tri-Tech Engineering Liquidation (ONLINE ONLY)Previous Page Listing ID#: 1526887

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Formerly Tri-Tech Engineering Liquidation (ONLINE ONLY)

Login

Sign Up

Sign Up

Login

Formerly Tri-Tech Engineering Liquidation (ONLINE ONLY)
Previous Page Listing ID#: 1526887

Other Sales by
This Company