00

Information Lot
Please note locations and agent contact info in each lot. Buyers have 14 days to remove equipment unless noted otherwise in description. Rigging is generally available on installed equipment. Rigging is an additional expense to buyer unless noted otherwise. Sales tax will be charged unless you have valid exemption.

98

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

99

Heavy Equipment Key Set 39 Keys
Shipping available for $20

199

Heavy Equipment Key Set 39 Keys
Shipping available for $20

999

Information Lot
Complete liquidation of Ray Lumber in Montrose CO. Steve Troyer is available for rigging and loading. Call for quote 716.499.6698

1000

5 Strand Log Deck w/ Stop'N'load
23' x 38', Electric drive, H78 chain on 1 strand, Includes support steel to ground and catwalk on side. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1001

Log Trough
No drive, 17" paddles on 6" ladderback chain, 40" x 43', Air cylinders on log kickers, Includes supports steel to ground and catwalk on side. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1002

Log Trough
Electric drive, 12" ladderback chain, 30" x 30', Hydraulic cylinders on kickers, Includes support steel to ground and catwalk on side. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1003

Buck Saw
Electric drive, 52" bar, Hydraulic cylinders. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1004

Rosserhead Debarker
Slant track, 35 hp electric motor on head, 80" x 34' overall, Hydraulic cylinders on kickers, 2 x 26" bullwheels, Needs new bearings soon, Includes 5' x 6' x 80" tall cab w/ controls and electrical box, Includes waste conveyor under debarker. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1005

Chain Waste Conveyor
14" ladderback chain, 16" pan, 2 x 58', Electric drive, Air cylinders on kickers. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1006

3 Strand Log Deck w/ Stop'N'Load
11'6" x 23', Air cylinder on loading arm, Electric drive, 3' nose skids, Includes support steel to ground. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1007

48" Bar Type Log Turner
Hydraulic drive and cylinder. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1008

3 HB Cox Carriage
90" x 16'6", Air dogs, 1" dogs, Tong dog, Panogram, Air setworks, Includes controls in cab, 1st lot of an entirety. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1009

Carriage Track and Frame
58" center to center of tracks, 70' long, Includes support steel to ground. Part of an entirety lot.  Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1010

Tyrone Berry Carriage Drive and Feed
Cable drum w/ 5/8" steel cable, 60 hp electric motor, Hydraulic pumps and valves, Young cooling unit, 3' x 4' x 16" deep hydraulic tank. Part of an entirety lot. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1011

62" Husk
60" Circle saw in good condition, Does not include electric drive, No belt on 20 x 64" off bear, Hydraulic pack, 52" x 7' x 7' tall cab(controls in cab go to whatever equipment the were used for). Part of an entirety lot. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1012

Electric motor
150 hp, 3 ph. Located at 13768 6900 Rd. Montrose, CO 81401. Part of an entirety lot. Call Jonathon with any questions at 574-349-4380.

1013

3 Blade Vertical Edger
22" blades - 2 moveable blades, Hydraulic blade control, 7 x 32" capacity, Electric drive. Part of an entirety lot. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1014

Carriage Entirety of Lots 1008-1013
With 10% raise. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1015

Armstrong Saw Sharpener
8" grinding wheel, 110 plug in. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1016

48'' Circle Saw
2 1/2X8P style, 2" arbor, In good condition. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1017

48" Circle Saw
2 1/2X8P style, 2" arbor, In good condition. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1018

Air Compressor and Dryer Unit
20 hp electric on compressor, Compressor condition unknown, Air Tak Dryer(SN-031-93), Includes all air line from compressor and dryer to equipment. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1019

Kaeser BS-61 Air Compressor
SN-510717, 240 cfm, 50 hp electric motor, 110 psig, Meter reads 43,587/8907 hours, Includes air line from compressor to dryer. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1020

Kaeser KRD 250 Air Dryer
SN-0361-2T-9405-0046K, 250 SCFM @ 100 psig, 460V, 3 ph, Includes air line from dryer to equipment. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1021

Rollcase
8 x 24 1/2" rolls, 44" spacing, Electric drive, 3' x 22', Air cylinders on board stops. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1022

Dead Rolls
4 x 17 1/2" rolls, 42" spacing, 2 x 35', Includes support steel to ground. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1023

2 Head Trim Saw
2 moving heads, Electric drive, 16" blades, Hand crank to move heads, 64" x 20'6", Includes catwalk and steps. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1024

3 Strand Transfer Deck
Electric drive, 90" x 33'. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1025

3 Strand Transfer Deck
9'6" x 11', H138 Turtletop chain, Electric drive, Set up for use as unscrambler. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1026

Board Sorter System
Electric drive, Air cylinders and valves on tipple, Made to separate 1 and 2" boards after unscrambler - then sort according to width into 8 different stacking bays, 100' long, Includes all steel to ground. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1027

4 Strand Log Deck
Electric drive, 12 x 26', Includes support steel to ground and catwalk on side. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1028

4 Strand Log Turner and Stop'N'Load Arm
6' x 13'6", Hydraulic drive and cylinders, Includes support steel to first cross beam. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1029

Sanborn Scragg Mill
52" x 5' x 90" tall cab w/ controls, (2) 75 hp electric motors on heads(motor starters included), (2) 48" Circle Saws(2 1/2X8P style), 20' "D frame" carriage w/ 4 hydraulic tong dogs, Panograph, (2) 2' x 4' off bear belts w/ 16" belts, (2) 18" x 8' slab dumps w/ hydraulic cylinders, Includes all support steel to ground, 1st lot of an entirety. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1030

Rollcase
7' x 19', Electric drive, 8 1/2" x 78" rolls, 21-42" spacing, Includes (2) 90" long pop up skate roll strands w/ hydraulic cylinders. Part of an entirety lot. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1031

Hydraulic Pack
(1) 40 hp electric motor, (1) 10 hp electric motor, Valves and pumps, 3' x 4' x 3' tall tank, Includes hydraulic lines to scrag. Part of an entirety lot. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1032

Sanborn Scragg Mill Entirety of Lots 1029-1031
With 10% raise. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1033

Gang Edger
3' x 9' infeed rolls, 3' x 4' landing table outfeed, Belt and skate roll runaround system, (4) 16" blades (blades set up to only be moved when machine is off), 4 x 32" capacity, electric drive. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1034

3 Strand Transfer Deck
Electric drive, Moline C55B Rooftop chain, 8'6" x 13', Includes 4' x 18' slide pan. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1035

Skate Rolls
2 sections, Both are 22" x 106", 3 1/2" x 18" rolls, 12" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1036

5 Head Shop Built Re-Saw
Modeled after Woodmizer - fits Woodmizer band wheels and bands, 1x19" band wheels, No bands included, (2) 10" x 16' feed belts, 32" x 9' infeed rolls w/ 80 x 92" 2 strand pop up transfer - hydraulic drive on transfer, 10 hp electric motor on each head, 16' drag chain under resaw - welded to frame, Includes Toshiba magnetic motor starter, 78" x 25' overall. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1037

Drag Chain Conveyor
Electric drive, 1 1/2" x 4" paddles, 5' long, Under resaw. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1038

Drag Chain Conveyor
Electric drive, 1 1/2" x 4" paddles, 16' long, Runs under edger. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1039

2 Head Trim Saw
1 moveable head, Air setworks and valves, 18" blades, Electric drive, 78" x 18'6" overall. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1040

Chain Waste Conveyor
Electric drive w/ gearbox, 13" pan, 10" sides, 11" ladderback chain, 28" x 150' long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1041

Board Chain Conveyor
Includes slide pan from trim saw to conveyor, Designed to carry boards upright from trim saw to sorter, 2 1/2'' width capacity, Manual tipple, 140' long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1042

Incline Belt Conveyor
Electric drive, 18" belt, 9" sides, 40' long, Includes metal detector(condition unknown). Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1043

Diamond Top-Feed Blo-Hog
SN-HR-5-557, Shop # - 2254, 28" x 14' w/ 5' tall sides slide pan feed, 24 x 28" top feed, 100 hp electric motor, Bottom discharge. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1044

Paddle Chain Conveyor
Electric drive, 12" paddles, 13" sides, 40' long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1045

Sumner Grinder Mounted on Hammer Blo-Hog
75 hp electric motor, 15 x 16" top feed, 6 1/2'' knives in Sumner, Sumner(SN-1131, Order # - 1227, Size-35), American Sheet Metal Works Blo-Hog/Hammer Mill - SN-CF-1, Size-50-12-25, Bottom discharge, Produces extremely fine powder-like shavings, Ready to install and put into use. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1046

Chain Waste Conveyor
Electric drive, 30" x 70', Rex-82 chain, 13" pan and sides. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1047

Shop Built Head Rig Mill
3 HB 6' x 15' carriage w/ self contained hydraulic unit, 1" dogs, No setworks - dogs not hooked up, 24" circular high speed log turner w/ hydraulic cylinder and no drive, Track is 48" center to center and 48' long, No cable on carriage feed, 1 3/4" x 38" band wheels, 1 1/2'' band, 30 hp electric motor on head, 2 blade vertical edger w/ electric drive- 12" blades, 1 moveable, 4 x 16" capacity, 20" x 5' off bear belt w/ 12'' belt (not installed). Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1048

Gang Rip Saw
7 x 11" capacity, No saws installed - 4" arbor, Power feed rolls, Air press down rolls, 50 hp electric motor on main heads. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1049

BMI Generator
Rated for 150KW, 3 phase, 60 cycle, SN-10015. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1050

175 KW CAT 1674 Genset
Engine(270 hp, 2200 rpm), Generator - Model-MP122, 450V, 1200 rpm, 60 cycle, Power Take Off Clutch, Includes fuel line to tank and all exhaust pipe. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1051

Diesel Fuel Tank
38" x 62" long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1052

2 Head Trim Saw
54" x 11' overall, Electric drive, 18" blades, 18" x 13' chain conveyor underneath saw - 11" paddles and electric drive. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1053

Yates American C89 4 Head Moulder
SN-B-1059, Electric drive, 5' x 10' overall, 3 cutting heads installed. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1054

Skate Rolls
22" x 10', 3 1/2 x 18" rolls, 12" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1054A

Skate Rolls
2 sections, (1) 16" x 10', (1) 2' x 6', 2 x 20" rolls, 7 1/2" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1055

Shop Built Head Rig
Weight strain, Power feed rolls, Electric drive, Designed to split 2 x4 s in half, 1 x 20" bandwheels, 1 1/4" band. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1056

Yates American V60 5' Head Rig
7 1/4" x 5' band wheels, 1 1/4" mead on top wheel - 3/4" mead on bottom wheel, 8" band, Weight strain, Power feed rolls, Main electric drive not included, 4' x 2' infeed rolls, 2' x 10' off bear belt w/ 18" belt, 1st lot of an entirety. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1057

Electric motor
100 hp, 440 V, 723A frame, 1200 rpm. Part of an entirety lot. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1058

3 Strand Transfer Deck
10'6" x 25', Rex 138 chain, Electric drive, Has pop up roll w/ electric drive. Part of an entirety lot. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1059

Belt Conveyor
Electric drive, 11" belt - needs repaired or replaced, Fits up to 16" belt, 22" x 33'6". Part of an entirety lot. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1060

4 Strand Incline Transfer Deck
Rex 130 chain, 9' x 11', Electric drive. Part of an entirety lot. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1061

Yates American Head Rig Entirety of Lots 1056-1060
With 10% raise. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1061A

Yates American V60 5' Head Rig for parts
Not complete, was used for parts on lot 1056, Has both bandwheels and powerfeed. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1062

4 Strand Stacker
Electric drive, 12' wide, 54" lifting arms, 102" tall, Includes slide pan to conveyor. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1063

Belt Conveyor
16" belt, Electric drive, 2' x 27'. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1064

4 Strand Transfer Deck
Electric drive, 11'6" x 17'. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1065

Rollcase
Electric drive, 40" x 16', 5 1/2" x 18" rolls, 48" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1066

2 Head Trim Saw
Electric drive, 20" blades, 6 x 20' overall, 1 moveable head. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1067

Belt Conveyor
2 x 40', 18" belt, 10" sides, Electric drive. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1068

Belt Conveyor
2' x 20', 10" belt, 14" sides, Electric drive. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1069

G. Stefani Double Head Tenoner
Electric drive, 10'6" x 11'6", 1 moving head. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1070

Allis Chalmers Generator
Was originally 60 cycle - converted to 240, 7/2.2 KW, Includes electric boxes. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1071

Skate Rolls
6 section - 12" x 10'. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1072

4 Strand Transfer Deck
No chain, Electric drive, 12 x 13', (2)12" x 10' sections of skate rolls. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1073

Campbell Hausfeld Air Compressor
10 hp electric motor, 120 gallon horizontal tank. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1074

Newman M-500 5 Head Planer/Moulder
42" x 16' spiral rollcase infeed, 6 x 14" capacity, 100 hp electric motor, SN-B-26653, 7' x 17' overall without infeed rolls. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1074A

Newman M-500 5 Head Planer/Moulder Parts Machine
Not complete, was used for parts for lot #1074. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1075

Belt Conveyor
Electric drive, 12" belt, 16" pan, 3 1/2" sides, 2 x 17'. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1076

Cut Off Saw
18" x 12' skate roll infeed w/ board stops, 18" x 16' skate roll outfeed w/ board stops, 14 blade, electric drive, Includes 1 extra blade. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1077

Electrical Control Panel
Motor starters and cut offs, Includes all conduit and electrical boxes in building not specifically lotted otherwise. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1077A

36" Blower
Electric drive, 16 x 18" outlet, 16" inlet, Includes all pipe to and from blower, Assorted galvanized, PVC, and flex pipe to equipment, Approximately 75' of 20" steel pipe to Cyclone, Includes structural steel to ground and 80"x8'6" cyclone. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1078

Assorted Planer/Moulder Heads
Fit lots 1053 or 1074, Tongue and groove, Cabin siding head, Wrenches and files. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1079

Assorted Planer/Moulder Heads
Fit lots 1053 or 1074, Tongue and groove, Cabin siding head, Wrenches and files. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1080

Electrical In Main Sawmill Building
Motor starters and cut offs, Includes all conduit and electrical boxes in building not specifically lotted otherwise. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1081

500 KW V12 71 Series Detroit Diesel Genset
Meter reads 3071 hours, 480V, Twin turbo, 8 cylinder, Includes all exhaust pipe and fuel lines to tank. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1082

500 KW Cummins Genset w/ Detroit Diesel Series 60
Engine- Unit # - 06R0181477, Genset - SN-BB-96771-93-1. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1083

Diesel Fuel Tank
4' x 6' long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1084

Diesel Fuel Tank
50" x 62" long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1085

V12 Cummins 1185 Engine
Meter reads 3342 hours, Approximately 700 hp, Good condition. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1086

17,000 Gallon Pressure Tank
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1087

Portable 2 Blade Edger
CAT diesel engine, 26" x 7' infeed rolls, 26" x 7' outfeed rolls, 4 x 26" capacity, 14" blades - 1 moveable, 2 1/2" hitch receiver. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1088

Allis Chalmers 6 Cylinder Engine
Brand new bearings, sleeves, and pistons, Has 0 hours since rebuild. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1089

75 KW Hercules Genset
Engine Model-D4800BT, SN-4002269, Meter reads 1916 hours on generator, Generator SN-FB275095, 1800 rpm, 404Y frame. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1090

DeWalt 36'' Radial Arm Saw
Model-TC-12-10, SN-1304, 30" blade, Electric drive, 21"x6' skate roll feed, 5'x6'x64" tall, Designed for cutting full size timbers. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1091

Detroit Diesel 4 Cylinder Engine
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1092

Detroit Diesel 671 Engine
Unit # - 6A-46107, Has hydraulic pump. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1093

Detroit Diesel 3045C Engine
SN-3A-7553. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1094

Detroit Diesel 2 Cylinder Engine
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1095

Detroit Diesel 8 Cylinder Engine
Needs new head gaskets. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1096

Allis Chalmers 1271 Engine
Comes out of Allis Chalmers HD11 Dozer. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1098

Radiators
(1)58" x 6' x 11" deep, (1) 3' x 44'' x4 1/2" deep, (1) 51" x 55" x 5" deep radiator cover. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1099

150 KW International Genset
Engine Model-UDT-817, SN-668-BMI-L01, Generator SN-RW164072, 1800 rpm, 208/416V. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1099A

Lincoln Shield Arc Welder
200A, 30V, SN-A240193, In good condition. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1100

Pallet of Electrical Boxes
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1100A

Detroit V871 Block For Parts
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1100B

Detroit 471 Engine Block for Parts
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1100C

Assorted Transmission and Engine Parts
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1101

3 HP Hydraulic Pack
14 x 21 x 10" deep tank. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1102

Detroit Diesel 6 Cylinder Engine for Parts
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1103

Kohler Gas Engine
Model-1A22, SN-133299, Single phase, 1200 rpm, Hand crank. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1104

40 KW 4 cylinder Detroit Diesel Genset
Generator SN-96569, 240/480V, 1800 rpm. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1105

Van Trailer w/ Contents
32' long, 94" inside width, 99" inside height, Bearings, sprockets, Hydraulic hoses,cylinders,pumps,motors, and valves, Small gas engines, air compressor, Lots of good parts. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1106

Diesel Fuel Tank
Gravity pump and nozzle, Includes stand, 50"x62" long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1107

Diesel Fuel Tank
Gravity pump and nozzle, Includes stand, 4' x 11' long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1108

Diesel Fuel Tank
Gravity pump and nozzle, Includes stand, 38"x5' long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1109

Grinder/Hog Screens
Brand new. Both are 35 1/2" wide, Fit lot #1045, (1) 1 1/8" holes, (1) 3/8" holes. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1110

Conveyor Belts
Lengths unknown, (1) 30", (1)28 1/2", (1) 24" cleated. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1111

Skate Rolls
19" x 10', 2 1/2 x 18" rolls, 4" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1112

Skate Rolls
2 sections, (1)15" x 12'8", 1 3/4" x 14" rolls, Varied spacing, (1) 16" x 10', 1 3/4" x 12" rolls, 12" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1113

Skate Rolls
20" x 10', 2 1/2" x 18" rolls, 7" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1114

Dead Rolls
28" x 10', 4 x 24" rolls, 36" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1115

Swinging Roll and Shafts
(2) 1 5/16" x 6' shafts, 6 1/2" x 24" roll on swings arm. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1116

24" Blower
40 hp Electric motor, 15" inlet, 8 x 10" outlet. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1117

36" Fan Blower
No drive, 16 x 32" bottom discharge. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1118

Buffalo Forge 15" Blower
Electric drive, 7 1/2" inlet, 7" outlet. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1119

20" Blower
No drive, 12" inlet, 7 1/2" x 9" outlet. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1120

24" Blower
No drive, 12" inlet and outlet. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1121

Knife Grinder
Electric drive, 3 x 14" grinding wheels, 10" x 6' workbench. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1122

Tyrone Berry Incomplete Carriage Drive
26 x 30 x 16" hydraulic tank, Young cooling unit, Hydraulic pumps. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1123

Shop Built Head Rig
30 hp electric drive, 1 3/4" x 38" bandwheels, No band, Can be set up w/ weight or air strain. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1124

Cabinet
34" x 4' x 90' tall. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1125

Air Compressor
No drive, 2' x 80" long horizontal tank, Condition unknown. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1126

Hydraulic Tank
30" x 64" x 20" deep. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1127

(2) Centri Master 24" Fans
3 phase, SN-XSWH43838. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1128

3 Hydraulic Cylinders
48". Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1129

Skidder Parts
Gearmatic Model 19 winch, (2) Skidder cable masts. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1130

2 Sprockets and 1 pulley
22"-10 groove pulley. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1131

Pallet of Chain Hoists
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1132

Roll of 5/8" Cable
Length unknown. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1133

Rollcase
No drive, 5' x 10', 6 x 54" rolls, Varied spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1134

Pallet of Sprockets and Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1135

Pallet of Sprockets and Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1136

Pallet of Sprockets and Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1137

Pallet of Sprockets and Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1138

Pallet of Chain
H-138, 6" ladderback, 2 1/2" and 3" transfer chain. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1139

Pallet of Chain
H-82 w/ 12" steel paddles, H-78, #74 chain, RS120 chain. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1140

Pallet of Chain
H-78, Roller chain, Transfer chain. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1141

Pallet of Sprockets
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1142

Pallet of Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1143

Pallet of Sprockets and Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1144

Pallet of Chain
Roller chain and H-78. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1145

Pallet of Chain
Rex 138 chain, Roller chain, WS-82-H chain, H78. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1146

Counterweights, Sprockets, and Bearings
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1147

15" Ladderback Chain
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1148

Rollcase
No drive, 42" x 9'6", 6 1/2" x 3' rolls, 3' spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1149

Hydraulic cylinder on pivot and Assorted track parts
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1150

Pallet of Hydraulic Cylinders and Electrical Parts
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1151

Rollcase
No drive, 32" x 11', 5 1/2 x 22" rolls, 30-40" spacing, Air cylinder on board stops, Roll of H138 chain included. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1152

Pallet w/ Hourglass rolls and pulleys
13 x 38" rolls, Aluminum Rosserhead debarker head - needs new teeth. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1153

48" Chain Type Log Turner
Hydraulic cylinder, No drive. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1154

Rollcase
45" x 13', No drive, 6 1/2 x 36" rolls, 36" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1155

Roll of 1" steel Cable
Length unknown, Full spool was 1 mile of cable. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1156

Hydraulic Tank
26 x 70 x 32" deep. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1157

Log Bunks
(2) 88" wide x 80" tall. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1158

Portable 100 KW 6 cylinder Detroit Genset
208/416 or 240/480V, SN-100-F-67, 1800 rpm, 2" hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1159

Portable Lincoln 225 Welder/Generator
SN-635415, Onan gas engine, 2" hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1160

Portable Ingersoll Rand Air Compressor
Meter reads 3303 hours, compressor needs rebuilt or replaced, 271 Detroit Diesel - In good condition, Pintle hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1161

Portable Harnischfeger DC Arc Welder
Continental Motors diesel engine(SN-12347, Model-FS244), Meter reads 617 hours, 600 A, 2" hitch, SN-38580, Type-4219DF-01. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1162

Portable LeRoi Air Compressor
Needs compressor rebuilt or replaced, John Deere Diesel(SN-547477T, Type-4219DF-01) - in good condition, Pin -through hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1163

Cargo Trailer and Contents
36' long, Single axle, 89" inside width, 83" inside height - 70" height in step up section. Includes all contents, International 8 cylinder engine block, Electrical panel, Parts for engine, Radiator. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1164

6 Cylinder Detroit Genset
Engine SN-4670, Electrical panel, Runs on LP, Generator SN-830145572, 1800 rpm, Single ph, 60 cycle, 120/240V. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1165

Belt Conveyor
18" pan, 8" sides, 16" belt, 3' x 40', No drive. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1166

Slab Upcut Saw
30 hp electric motor, Electrical boxes, 30" blade, Air cylinder on blade, 9 x 16" capacity. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1167

Rollcase
No drive, Air cylinder on cant kicker, 6 x 10', 6 1/2 x 60" rolls, 26" spacing, Needs new bearings. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1168

Asplundh Chipper
60 hp electric motor, 10 x 16" infeed capacity, 4-knife 12 x 16" head. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1169

Skate Rolls
2' x 20', 3 1/2 x 18" rolls, 12" spacing. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1169A

Cable Hoist Crane
Hydraulic cylinder, Pully system - fits up to 3/4" cable. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1170

2 Log Bunks
7' x 55" tall. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1171

Portable Concave Belt Conveyor
Electric drive, Pintle hitch, 30" belt, 3'x45'. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1172

Paddle Chain Conveyor
28" x 42', No drive, 7" ladderback chain w/ 2 1/2" paddles on either side, 13" pan, 13" sides. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1173

Schurman 3DH50 Winch System
SN-292, 3 Cable drums - (1) empty, (1)1" cable, (1)3/8" cable, Foot pedal operated, No drive. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1174

Rollcase
6 1/2 x 30" rolls, 36" spacing, No drive, 38" x 29'6". Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1175

Assorted Sprockets, Bushings, and Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1176

Werner 24' Extension Ladder
Aluminum, 225 lb capacity. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1177

Water Pump
Gas engine, Burks Pump - Catalog # E29, SN-41947. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1178

Wells Brothers Lathe
Electric drive, 6x18" bed, Includes dies and tools. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1179

3 Wheel Pulley Assist
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1180

Pallet of Bushings, Sprockets, and Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1181

30 ton Shop Press
Heavy duty, Includes extension cords, 2' x 4' x 112" tall w/ hanging rack. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1181A

Tire Chains
(3) 32" wide, (2) 18" wide, (2) 24" wide. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1182

Pallet of Bushings, Sprockets, and Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1183

Pallet of Chain
Roller Chain and other assorted small chain. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1184

Air compressor, Bottle jack, Air tank, and Hydraulic motor
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1185

Pallet of Bushings, Sprockets, and Pulleys
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1186

Drum of Roller Chain, Hydraulic Cylinders, and Electrical Boxes
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1187

Tire Chains
18" wide. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1188

Assorted Truck Parts
Engine parts, Battery charger, shocks, springs, Hydraulic pumps, Belts. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1189

Shelf w/ Electric motors, Truck parts, and welding rods
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1190

60" Circle Saw
No shanks or bits. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1191

56" Circle Saw
17651 style bits. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1192

48" Circle Saw
No shanks or bits. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1193

(2) 36" Circle Saws
Missing some shanks and bits. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1194

Chipper Knives
1 7/8" x 18 3/8", Approximately 100 total. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1195

Shelf Loaded w/ Parts
Electric and hydraulic motors, air tank, air and hydraulic cylinders, Hydraulic fittings, Truck parts, Air and hydraulic valves, Caution sign, Bearings. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1196

Creeper, Antifreeze, and Counterweight
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1197

Shelf Loaded w/ Parts
Assorted roller chain and parts, Electric and hydraulic motors, Bearings, Lots of new chain. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1198

Gemco 24" Std. Duty Lathe
Electric drive, SN-29848, Includes tools and parts, 12" vise. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1199

Crate of Truck parts, Pulleys, Sprockets, and Bearings
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1200

Cabinets Loaded w/ Parts
(3) 18 x 45 x 65" tall cabinets, Fasteners, pulleys, bearings, Sprockets, Hydraulic parts. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1201

Sprockets, Pulleys, and Bushings
Includes all parts hanging on wall and sitting on stairs. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1202

Sprockets, Pulleys, and Bushings
Includes all parts sitting underneath stairs. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1203

Air Compressor and Vertical Tank
Electric drive, 50 gallon tank. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1204

Magna Force Air Compressor
6.5 hp electric drive, 60 gallon vertical tank, Includes all hose - 2 reels of 3/4" air hose. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1205

Shelf of Electrical Parts
Electrical boxes, Brakers, wire, Conduit parts. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1206

60" Circle Saw
Ready to use. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1207

Hammering Bench for Circle Saws
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1208

Sprockets, Pulleys, and Bushings
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1209

Steel Workbench w/ Tools
4' x 4' x 39" tall, (2) 6" vises, Wrenches, Sockets, Grinder, Hydraulic pumps, Toolbox w/ assorted hand tools. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1210

1" air impact, Tail stock for lathe and truck parts
Rolle stand, Brand new drive tube for drive line - universal truck fit. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1211

Porta-Heat Space Heater
110 plug in and kerosene. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1212

Utility Cart
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1213

1" air impact, Chain hoist, Wire welder, Large Locknut Socket Set
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1214

PNC 16" Exhaust Fan
115V. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1215

Steel Bench w/ Hydraulic Cylinders, Valves, and Fittings
31x35x29" tall. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1216

Craftsman 8" Bench Grinder
110 plug in, Has light, Mounted on Stand. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1217

Cabinet w/ Parts
Gauges, Truck parts, Exhaust pipe, steel shafts. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1218

No. 2 Cincinnati Milling Machine
Electric drive, 12x49" bench, Includes bits, 6" and 7" vises, In very good condition. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1219

Bench w/ Milling Machine parts, Steel Shafts, and Welding rods
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1220

Duracraft Drill Press
Electric drive, 6" vise, SN-26988. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1221

Lincoln DC-250 Arc Welder
SN-AC-623968, Lincoln LN-7 Wire feeder w/ spool of wire, Includes leads, gun, and clamps. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1222

Miller Dialarc 250 AC/DC Welder
SN-HH009102, Includes leads and clamps. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1223

Shelf and Cabinet Loaded w/ Parts
18 x 45 x 65" tall cabinet, 12" x 3' x 4' tall shelf, Belts, Bushings, Wire, Cylinders. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1224

Shelf w/ Cylinders, Sprockets, Gears, and Pulleys
2' x 9' x 3' tall, Includes all contents on bench and under bench. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1225

Machinist Lathe
4 jaw chuck, Electric drive, 16x88" bed, Includes extra parts and materials, Was used for railroad in CO in late 1800s. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1226

Shelf Loaded w/ Parts
18"  x 6' x 54" tall, Grease guns, lathe parts, fasteners, organizers, steel. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1227

Knife Grinder
Electric drive, 4 x 16" bed, Up to 10" grinding wheels. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1228

Newman No. 71 Knife Grinder
6" grinding wheels, 110 plug in, 9" x 4' bench. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1229

Dependable Knife Grinder
Model-832, SN-1735, Electric drive, 3 1/2" x 8" grinding wheel, 12 x 78" bench, 32" holder. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1230

Band Tensioner
28" x 4' x 33" tall table. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1231

Foley Chainsaw Sharpener
Model-380, SN-2124, 110 plug in, 7" wheel, Includes chains on stand. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1232

Band Sharpening and Hammering Bench
7 1/2  x 36 x 3 1/2" thick hammering block, Armstrong Welding Clamp, BT and B No. 9 Band Clamp, Assorted tools on bench. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1233

Scales and Band Clamp
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1234

Grinding Stone
8 x 23", Includes all tools pictured and stand. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1235

Organizer loaded w/ Fasteners
12 x 35 x 42" tall. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1236

Chipper knives, Planer knives, Moulder teeth and knives
40 x 52 x 41" tall bench, Includes all knives under bench. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1237

Armstrong 1631 Left Hand Band Sharpener
Electric drive, Includes stands, 10" wheel. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1238

Assorted Grinding and Cutting Wheels
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1238A

8" bands
12 total, Roughly 24' long, 3 brand new bands. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1239

60" Circle Saw
In good condition. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1240

48" Circle Saw
No shanks or bits, Arbor is damaged. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1241

40" Circle Saw
Needs sharpened. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1242

Assorted Sawbits and Shanks
Some new, Some used, Carbide and steel bits. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1243

24" Blades
5 3/8" arbor, 10 total. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1244

22" Blades
1 1/4" arbor, 7 total. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1245

Assorted Saw Blades
3 Blades, 24 inch diameter with 4 3/4 inch arbors.
2 Blades, 22 inch diameter with 6 3/8 inch arbor.
2 Blades 20 inch diameter Damaged
2 Blades 17 inch diameter Damaged
1 Blade 15 inch diameter Damaged
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1246

12 Inch Saw Blades
12 inch diameter with a 2 inch arbor. A total of 39 blades. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1247

Assorted Blades
10, 12, and 14 inch edger and trim saw blades. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1248

Trim Saw Blades
16 to 20 inch blades with 1 inch arbors. A total of 11 blades. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1249

Assorted Saw Blades
12 blades total, shafts and bushings included. 18 to 30 inch edger and trim saw blades. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1250

Assorted Saw Blades
Trim and chop saw blades. 12 to 24 inch blades with a total of 40 blades. Some damaged. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1251

Buck Saw Bars
2 Bars, 7 ft. one has end housing. No chain included. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1252

Buck Saw Bars
3 bars, 64 inch. only one has chain. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1253

Buck Saw Chain
Two partial rolls brand new. Some used however teeth still good. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1254

Knives and Heads for Plainer/Moulder
4 3/4 in. X 9 in. Knives. approximately 75 total. 
2 square knife heads. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1255

Plane/Moulder Heads
Assorted styles. 15 total. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1256

Assorted Moulder Teeth
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1257

Wooden Knife Blocks
5 1/2" x 12" x 1 1/8" thick. Total of 12. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1258

Assorted Belts
All motor and pulley belts on wall and floor in the loft. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1259

Conveyor Belts
Length unknown. 5", 6", 12", 10 1/2", 15". Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1260

Conveyor Belts
Lengths unknown. 4", 15", 12", 8", 5", 9 1/2", 3 1/2", 11". Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.
 

1261

Conveyor Belts and Hydraulic Hoses
Large assortment on tailing belts, 3" to 5". Also includes all hydraulic hoses and valves on the floor next to pile of belts. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.
 

1262

Assorted Hydraulics
Hydraulic hoses, cylinders, valves, pumps, and fittings. Also assorted saw blades, shelving, electrical parts, and wire. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1263

Large Shelf Loaded with Parts
18" x 24' x 7' tall, organizers and drawers with assorted fasteners and fittings, electrical parts, hand tools, filters, chains, gears, hydraulic motors, and bearings. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1264

Work Bench with Parts and Tools
Sockets, Air and hydraulic valves, motors, Broken 11" vice, clamps, and crimping tools. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1265

Dana Collar Crimp
Model T-400, includes organizers with fittings, 220 plug, 2 partial rolls of 3/4" hydraulic hose and 1 partial roll of 3/8". Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1266

Desk and Shelf with Parts
Hydraulic motors and electric motors, bearings, gears, and electrical parts. 12" x3' x 78" tall shelf. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1267

Office Furniture
Includes all desks, chairs, cabinets, end tables, shelves, helmets, and appliances in office. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1268

Portable Firewood Processor
4 Cylinder Detroit, 33" x 3' x 21" tall Hydraulic tank. pindle hitch, 60 gallon fuel tank, 2'x5'x6' cab with controls, 30" bar with two extra bars, 32" x 14" conveyor fed with grapple on I beam. 2' x 2' splitting head, 11'6" x 13'6" in-feed deck with roller chain. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1269

Portable Belt Conveyor
Hydraulic drive with 15" belt. 7" sides. 32"x30'. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1270

Lodge and Shipley Engine Lathe
Electric drive, SN-45793, 4 jaw chuck, 16x66" bed. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1271

Clausing Drill Press
Electric drive, Model-1900, SN-006356, Includes rack of bits. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

1300

Meadows 3HB Portable
56'', handset, air dogs, cant flippers, new wheels & rails about 3 years ago, lots of new parts in the last year, mill was running until 2 months ago, new off-bear belt, transport wheels are good, 16'' blower with 16'' outlet, large wheels are in good condition, hydraulic pump runs off end of mandrel shaft, 32'' C-C x 39' track, 6-7 gauge F style saw, 12' carriage, new V belts, 60 gallon vertical air tank, 40' x 8'' PVC pipe, 110 V over air valves, good condition. Located at 6659 Norco Rd N.E. Carrollton. OH. Contact Eugene with any questions at 260-350-8953.

1302

John Deere 6466 Power Unit
MN 6466, 2214 hours, turbo, 6 cylinder, new radiator, WD-11 clutch rebuilt less than 500 hours, jack shaft 1 1/2'' x 70'', used to run the mill, very good condition,  Located at 6659 Norco Rd N.E. Carrolton. OH. Contact Eugene with any questions at 260-350-8953.

1302A

Quincy Air Compressor
7.5 hp, good condition,  Located at 6659 Norco Rd N.E. Carrollton. OH. Contact Eugene with any questions at 260-350-8953.

1303

Cornell Edger
MN HE-27, SN 671-9-80, 2 moving saws, 14'' blades, 8 extra saws resharpened, lazer lites, 30'' x 8' infeed rolls, 30'' x 8' outfeed table, 16'' blower with 6'' inlet, 6'' outlet, good blower, line shaft ready, good feed rolls, V belts, 24' 6'' PVC pipe, very good condition.  Located at 6659 Norco Rd N.E. Carrollton. OH. Contact Eugene with any questions at 260-350-8953.

1304

3 Strand Mellot Log Deck
8' 6'' x 24', Tulsa winch gear box with hydraulic motor, 2'' x 6'' steel tube skids, very good condition.  Located at 6659 Norco Rd N.E. Carrollton. OH. Contact Eugene with any questions at 260-350-8953.

2200

Massey Ferguson 6500 Forklift
6 x 48" forks, 64" x 90" tall mast, Diesel engine, Has side shift, SN-2026601075, Machine weight - 10,950 lb. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2201

Clark Forklift
25000 lb. forklift with 6 cylinder Perkins Diesel, oil was just changed in the engine and hydraulics, all filters changed except for the air filter, runs and lifts fine, side shift cylinder needs packed, main cylinder was just rebuilt, brakes need bled, wasn't bled after hydraulic change, Brakes worked great before fluid change. Located at 1783 Rehobeth Church Rd Shelby, NC 28150. Contact Eugene with questions at 260-350-8953.

2230

1998 JLG Lift
Model # 600S, serial # 064231 0300034991, meter shows 9331 hours, Deutz MmF4M1011F, serial # 21503116, platform height to 60', horizontal reach 50', tires good, hydraulic pump is being rebuilt, good condition, Located at 5006 950 N Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

2231

Snorkel TB60 Boom Lift
It has a 60' maximum platform height, 500 lb load capacity, Toyota 4Y engine that can run on either gas or LP, the meter shows 6'245 hours, it has been sitting for several years and is not in running condition, the drive gear has been disconnected so it can be moved. Model Number: A60RT.  Serial Number: 886670888.  Call Bronson 574-210-3721 Item is located at 21708 SR 119 Goshen IN. 46526

2250

International 8090 Wheel Loader
Needs new batteries and rear tires repaired, Diesel engine, 23.5-25 air tires, Has 3rd valve, No quick attach, Includes 100" wide grapple forks w/ 48" forks and 9'x52"x6' tall bucket w/ fork pockets, Meter reads 1165 hours, SN-32190. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2251

Terex Wheel Loader
Model-72-31-AA, SN-58140, Detroit Diesel Engine, 20.5R25 air tires, Includes 7' wide grapple forks w/ 36" forks, Has 3rd valve, No quick attach, Hours unknown, Needs batteries. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2252

Wheel Loader Bucket
Pin though style, SN-9237690, 9' wide, 42" deep. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2253

Wheel Loader Forks
5 x 48" forks, 4' wide x 56" tall. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2254

International Hydraulic Wheel Loader Bucket
SN-U-1012, Pin through style, 9' wide, 32" deep. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2255

Terex Wheel Loader
4 cylinder Detroit Diesel engine, Meter reads 5043 hours, No 3rd valve, Good tire tread, Includes 8' bucket. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2256

John Deere 544 B Wheel Loader
Mn# 544BH, Serial # 309819T 6 cylinder diesel engine w/turbo,approx. 2,000 hrs. on rebuilt,has recent oil change, manual joystick valve boom control, has third valve,no forks, does not include quick attach adapter, Cab has heat, has a small leak, led lights work, runs and operates as it should. Located at:1268 Burkley Rd.Cadiz, KY 42211. Contact Eugene with any questions at 260-350-8953.

2257

Quick attach adapter for 544 Loader
Located at:1268 Burkley Rd. Cadiz,Kentucky. Contact Eugene with any questions at 260-350-8953.

2258

Dirt Bucket for Wheel Loader
pin fits on  544 Located at: 1268 Burkley Rd, Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

2259

Split Bucket
Pin on Dirt Bucket, has good bottom cutting edge, 8' wide. Located at: 1268 Burkley Rd, Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

2260

Loader Forks
5" x 48" Located at: 1268 Burkley Rd, Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

2261

Glass Doors for John Deere 544 Wheel Loader
good condition Located at: 1268 Burkley Rd, Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

2262

John Deere Diesel Engine
Taken out of 544 wheel loader, needs rebuilt, located at: 1268 Burkley Rd. Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

2263

Hydraulic Cylinders
Taken off of John Deere 544 wheel loader, Cylinders are good, some have been repacked. Located at:1268 Burkley Rd, Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

2264

International 540 Wheel Loader
Model 540 Serial # 35201010003281 6 cylinder International engine, runs good, 3 speed with reverser, transmission is a little weak, no brake. Includes dirt Bucket 9' wide, Meter reads 7364 hrs. Runs and operates Located at:5191 E. St. Rd. 236, Rockville,In. 47872. Call Jonathon 574.349.4380

2265

Allis Chalmers Wheel Loader
Model-71095702, SN-840B-3406, Meter reads 4736 hours, Has 3rd valve, 6 cylinder diesel engine, Includes Pin through grapple forks - 80" side, 5 x 48" forks, 16.9-24 air tires. Has just been serviced has all new oil and filters .Located at 5266 Donley Rd. Middlefield, OH 44602. Call Eugene with any questions at 260-350-8953.

2300

Allis Chalmers HD16 Crawler Dozer
Meter reads 9314 hours, SN-HD16A-4912, 22" tracks w/ approximately 80" tread left on pads and sprockets, Allis Chalmers diesel engine(SN-16-4065), 12'6" 4-way blade, Carco C-80 Winch w/ 3/4'' cable. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2301

Allis Chalmers HD16 EP Crawler Dozer
22" tracks w/ Approximately 65% tread, 11' 4 way blade w/ hydraulic tilt, Allis Chalmers diesel engine w/ reversible fan, Power Shift, New undercarriage in last 500 hours, Meter reads 5354 hours, Adjustable pin hitch, Will be running by day of auction. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2302

Dozer Track Chain
Simmel-6-A166 style, 2 rolls - enough for 2 tracks on Allis Chalmers HD16-EP. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2303

CAT D4C Dozer
S/N #8YLO1228, MN D4C, Starts runs and functions. Blade has had some welding done, 4,276 hours. Starts,runs and functions as it should.
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2304

John Deere 455G Crawler Loader with Forks
7412 original hours, 5'' x 48'' forks, with forks pin on under 200 hours on new undercarriage, new alternator, 4 speed power shift, manual valve Joystick boom control, good running machine, new shaft in forks, decellerator pedal,  Located at 6659 Norco Rd N.E. Carrollton. OH. Contact Eugene with any questions at 260-350-8953.

2305

Dust Bucket
90'' x 48'' x 48'' slip on bucket, rough condition,  Located at 6659 Norco Rd N.E. Carrollton. OH. Contact Eugene with any questions at 260-350-8953.

2310

1996 Volvo A40 Off Road Truck
Year:1996, S/N A40V1037, MN A40, Starts, runs and functions.29.5R25 Tires in very good condition, some surface rust. 
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286 

2311

1998 Volvo A40 Off Road Truck
Year: 1998, S/N A40V1446, MN A40,
Starts, runs and functions. 875/65R29 Tires
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2312

1999 Volvo A25C Off Road Truck
S/N 5350V11888,MN A25C6X6, year 1999
Starts, runs and functions. 23.5R25 Tires 37,294 miles on meter.
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2320

CAT 312C Excavator
Cat 312C 11,417 hours on meter aux. plumbing. loose pins on end of stick. Starts runs and function.
S/N CAT0312CPCAE01326, MN 312C
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2321

Hitachi 270LC Excavator
S/N 158-5838, Model EX270LC
Starts, runs and functions.
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2350

36" Excavator Bucket
6 teeth, 3' deep. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2351

Pallet of Assorted Excavator Bucket Teeth
Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2352

CAT 225 Excavator Boom
In very good condition. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2353

Excavator Bucket
18 x 45", 3 teeth. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2354

Cat 950 G Quick Coupler
New hoses and no cracks.  Located: 5161 US 98  Santa Rose Beach, FL 32459.  Removal 30 days.    Agent: Zach Kittrell 931-224-0699

2355

5'3" forks 7" wide
Located: 5161 US 98 Santa Rose Beach, FL 32459. Removal 30 days. Agent: Zach Kittrell 931-224-0699

2401

360 Clamp Grapple
62" wide sides, 6' max opening. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2415

Feller Buncher Cutting Head
7' tall, 48" max width, Modified to shred tires. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2416

Case 1187B Feller Buncher
Needs batteries, Approximately 50% tread on tracks, Good undercarriage w/ rock guards, Leaks a lot of engine and hydraulic oil, Head - Has lateral tilt,6' tall, 22" width at bottom, Arms open to 24", No cutting blade, In very good condition. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2417

Prentice Knuckleboom Loader 410D
5.9 Cummins rebuilt with only 43 hours, hydraulic joystick control, foot pedal swing control, has valve for bucksaw, Prentice continuous rotation grapple, good condition. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

2418

Timber Jack 1210 Forwarder 4 Bunk
Model # 12100304, engine serial # 80518-U586008Y, machine serial # 1210-8x8/151-406151, 110 HP, meter shows 17,746 hours, continuous rotating grapple super grip, Perkins 6 cylinder engine completely rebuilt, 0 hours on rebuilt, cab has heat and A/C, pilot joystick controls, 8 wheel drive, put new bearing in boom base, now seal has small oil leak, electric solenoid has some problem moving boom in, center rotation can be locked, only 3 bunks, owner has 4th one, 8' x 16' bunks, 1 new tire, others show wear, items done on timber jack rebuilt: radiator flushed check, new water pump, rebuilt injection pump, rebuilt injector, new valves decked head, new piston, rod bearings, sleeves original, original maonns, 2 new batteries, 1 new swivel aylder, 1 new swivel bearing, new fan belts, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

2419

Rotochopper CP 118 Coloring Machine
1035 hours, low hour machine that is production ready. manual will come with it, There are 2 barrels of dye being sold with the rotochopper. One is full of dark brown dye & one that is 1/2 full of bursting red dye. Located at 665 Quincy Grange Rd Quincy, MI 49082. Contact Jonathon with any questions at 574-349-4380.

2425

Massey Ferguson 220 Cable Skidder
Winch w/ 1/2" cable(SN-21-441-R, Model-21), 18.4-25 tires, Tires chains for front tires, 76" 2 way blade, Diesel engine, Meter reads 3200 hours. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2426

5 Skidder Tires
18.0-25 size. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2450

Wood-Mizer LT-40 Portable Sawmill
Serial # 0987802AG, meter reads 1896 hours but has approximately 4200 actual hours, installed a new 23 HP Vanguard engine 18 months ago, new bandwheels, 12 volt over hydraulic, has hydraulic clamps, dogs, and turner, power feed, power up and down, 120 volt alternator, has had a lot of new parts in the last few years. Located at 7630 Hinka Rd. Posen, MI 49776. Call Jonathon 574.349.4380

2452

738 Woodmizer Band Saw Blades
Silvertip, 16 pc., 14' 1'' x .045, 7/8'' tooth spacing, 1 1/2'' wide, new blades. Located at 625E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

2461

Tooth Setter & Gauge
for 2'' bands, hand held gauge. Located at 625E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

2462

Cooks Band Roller
hand crank for 2'' blades. Located at 625E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

2463

Band Wheels & Parts for Cooks Mill
1 1/2'' x 26'' wheels for Cooks, wear plates for dogs, guide rolls are like new, measure scale tape.Located at 625E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

2650

10' Snow Plow
Hydraulic cylinders for blade angle adjust, Mounts on truck. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2651

Pull Behind Packer
Pin through hitch, (2) 40 x 48" rolls w/ 7" rounded pegs, 64" x 10' overall, 12' long w/ tongue. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2652

Hesston Stak Feeder 30
Pin through hitch, PTO and hydraulic hookup, 33" x 10' plus 4' fold down section chain conveyor, 90" x 16'6" 5 strand infeed deck, 9' wide cutting head. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2674

2016 RAM 1500 Pick Up Truck
2016 RAM 1500 Pick Up Truck S/N 1C6RR7G8GS125422
189,794 miles, 4 Door, 4WD, Auto Transmission, Short Bed with cover, Starts, runs and drives. Very good interior condition.
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2675

2013 Jeep Patriot
Jeep Patriot S/N 1C4NJRFB1ED634076
114,486 Miles, 4DR, 4WD, 215/65R17 Tires in good condition.
Starts, runs and drives. Very clean interior.
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2676

2011 Chevrolet Cargo Van
2011 Chevrolet Cargo Van S/N 1GCZGTCG8B1173307
79,074 miles, 9,600# GVWR, 245/75R16 Tires, one side cargo door, shelves and cabinets in rear, Auto Transmission, A/C, LT245/75R16 Tires, Automatic Transmission. Tool cabinets and shelving in rear.
Starts, runs and drives.
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2677

2012 Ford Cargo Van
2012 Ford Cargo Van S/N 1FTSE3EL7CDB09597
153,996 miles, 9,500# GVWR, 245/75R16 tires, A/C, Automatic Trans, Rear cargo doors, one side cargo door, roof rack, Shelving and cabinets in rear.Starts, runs and drives.
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2678

2017 RAM 1500 Cargo Van
2017 RAM 1500 Cargo Van S/N 3C6TRVNG8HE541832
93,456 miles, 8,550# GVWR 225/75R16 tires, Auto Trans, A/C, Rear cargo doors and one side cargo door.Starts, runs and drives.
Location: 11830 Old Baltimore Pike, Beltsville, MD 20705
Contact: Steve (570) 460-0286

2679

2004 Ford F-350 Dual Cab Pick -Up
Lariat, diesel engine, new tires, leather interior, 304,365 miles, 4 wheel drive, auto transmission, heavy duty front bumper, 6.0 Power Stroke V8 Turbo engine, Sunroof, Gooseneck ball, tool box with fuel tank.  30 days removal Located at 463 Old Camden Road, Parsons, TN 38363 Contact Zach for more info: 931-224-0699

2700

Kenworth Truck w/ Hood 24,000 Knuckleboom
Meter reads 20,776 miles, 5 Speed manual transmission, Diesel engine, Includes tires chains and extra hydraulic lines, Loader SN-241830, Diesel engine, Joystick controls, Steel hydraulic lines on boom, 360 grapple. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2701

1985 Western Star 4964-2 Truck
VIN-2WKPDCJG4FK911246, GVWR-50,000 lb, Eaton Fuller 8 speed transmission, Meter reads 82,814 miles, Cummins diesel, 80" wide x 6' tall log bunk on back of truck, Pintle hitch, Includes tire chains. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2702

1990 Peterbilt Truck
VIN-1XPCDB9X2KD283945, Meter reads 93,909 miles, Eaton Fuller 8 speed transmission, Sleeper cab, GVWR-50,000 lb, CAT diesel engine. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2703

Peterbilt Truck w/ Savage Log Loader
Miles unknown, 5 speed manual transmission, Hydraulic pumps and tank for loader, Includes tire chains, 360 grapple. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2704

1974 International 2070A Dump Truck
VIN-71797EGB13071, Meter reads 371,725 miles, GVWR-27,500 lb, 5 speed manual transmission, 8' x 18' bed w/ 4' tall wooden sides. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2705

Mack Truck Wrecked
Bellhousing busted.  Motor and transmission good per machinic for seller.  More information to come.  Bill of Sale Only.  Located: 463 Old Camden Road, Parsons, TN 38363 Agent: Zach Kittrell 931-224-0699 30 days removal. 

2706

Ford F600
flatbed, diesel, condition unknown, long time since started Bill of Sale only. Located at 107 Albert Glasgow Road, Dover, TN Call Zach 931-224-0699 for more info.

2750

Log "Pup" Trailer
7' wide x 6' tall log bunk, 25' long overall, Pintle hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2751

R.W Moore Lo-Boy Trailer
9' x 17' main deck, 35' long overall, Double axle, Includes chains and binders. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2752

1989 Red River Walking Floor Open Top Trailer
VIN-1R9LB4220K1051052, GVWR-67,000 lb, 11R22.5 tires, Diesel engine w/ hydraulic pumps for floor, 90"x6' tall sides, 42' long. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2753

Trailer Dolly
Pintle Hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2754

Flatbed Trailer
92" x 16' main deck, 19' long overall, 2" hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2755

Garden Utility Trailer
45" x 6' x 20" deep, 1 7/8" hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2756

Horse Trailer
Gooseneck hitch, 70" inside height, 78" inside width, Has overhead storage over hitch, 18' long main section, 25' long overall, Includes contents(mostly empty 55 gallon barrels). Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2757

Flatbed Trailer
8 x 18' main deck, 22' overall, 2" hitch, 18 x 80" ramps. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2758

Utility Trailer
5'x12' w/ 12" sides, 16'6" long overall, 12" x 7' aluminum ramps - 750 lb capacity, 2" hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2759

Log "Pup" Trailer
86" x 4' tall log bunk, 22' long overall, Pintle hitch. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2760

Flatbed Frame for Truck/Trailer
94" x 17', 6' tall wooden sides. Located at 13768 6900 Rd. Montrose, CO 81401. Call Jonathon with any questions at 574-349-4380.

2761

Dorsey Aluminum Dump Trailer
good tires, 96'' x 39', self dumping cylinder, brakes 70%, Budd style wheels, tarp, unloading gate, good condition, Located at:5191 E. St. Rd. 236, Rockville,In. 47872. Call Jonathon 574.349.4380

2762

Dorsey Van Trailer
VIN 1DTV612275A230105, year 1994, 48' for storage unit, no title, 8' x 48', swinging doors on rear, good aluminum floor, wheels and tires are good, ready to move, insulated for reefer unit, Located at:5191 E. St. Rd. 236, Rockville,In. 47872. Call Jonathon 574.349.4380

2763

1988 Trailmobile flatbed
model F711-6UAJ 46" wide 45' long. Bill of Sale only.  Located at 107 Albert Glasgow Road, Dover, TN Call Zach 931-224-0699 for more info

2900

2020 Pallet Chief Skid Nailing Machine,
Nailer, Stacker, and Rolling Table.  Can make it a 4 head, max pallet 48"x48". Was working as should when removed, seller bought a bigger machine.  Also includes 6 cases of nails and extra gun.  Seller will load on truck at no cost to buyer.  30 days removal. Located at 576 Powell Loop, Andrews, SC 29510.  Agent: Zach Kittrell 931-224-0699

2901

HMC AC 40 Circular Sawmill
1st lot of entirety. 3 head block with pantograph modular frame carriage, 15'8" long, 8'6" wide, 10" trucks, air over hydraulic setworks, elctric sawyer setworkds, includes hydrualic power pack, 50' x 4' track, Husk frame attached to track with mounted size 3 & 4 MCC & controls for setworks. Top Saw attachment. 5'6" offbear with 8"x18" end rolls, 4' x 4' sawyer's cab with sawyer controls. 43' x 118" wide nose skid section. Located at 107 Albert Glasgow Road, Dover, TN Call Zach 931-224-0699 for more info

2902

HMC Chain Type Log Turner
#61095, 2 cylinder lift, runs of fmill hydraulics, no separate hydraulic power pack. Part of an entirety lot. Located at 107 Albert Glasgow Road, Dover, TN Call Zach 931-224-0699 for more info.

2903

22'x28' Outfeed belt conveyor
24" rolls, 18" belting, 3HP Baldor gear motor drive. Part of an entirety lot. Located at 107 Albert Glasgow Road, Dover, TN Call Zach 931-224-0699 for more info.

2904

Tyrone Berry Hydraulics 75HP
with pump package and drum package. Part of an entirety lot. Located at 107 Albert Glasgow Road, Dover, TN Call Zach 931-224-0699 for more info

2905

HMC AC 40 Circular Sawmill Entirety
Lots Tied together with a 10% raise. Located at 107 Albert Glasgow Road, Dover, TN Call Zach 931-224-0699 for more info.

2906

Corinth 48" 3 head block sawmill
3 head block, 2 on board log turners, tong dog air over hydraulic, HB: 1st-2nd 5' apart, 2nd-3rd 6' apart. 16' track.  Also includes 60' track with 53" centers.  Track in (2) sections.  25' and 35' for total of 60'.  Husk with off bearer belt.  Built in barn sweep dust (6') conveyor, off bearer (5' x 22") and 4x5' sawyer's cab with A/C and Heat.  Siemens computer setworks, carriage and track seem to be in good shape. No motor, no motor controls.  Out and ready to load.  Loader on site to assist in loading.  Located: 463 Old Camden Road, Parsons, TN 38363.  Agent: Zach Kittrell  931-224-0699.  

2907

3116 Caterpillar Diesel Engine
MN 3116, 215 hp, rebuilt 2177 hours ago, clutch brand new 1 year ago, Atlas radiator new 2 years ago @ $1500, starter rebuilt & new water pump in January 2022, pulley on clutch goes with the engine, great running unit. Located at 1982 4TH Avenue Shetek, WI 54728. Contact Eugene with any questions at 260-350-8953.

2907A

Detroit Water Pump*
Under 300 hours on meter. Was running good when taken out of service. Located at 1840 Pecksettlement Rd Jamestown, NY 14701. Contact Jonathon with any questions at 574-349-4380.

2908

Master Super 70 Tube Bender
It is hydraulic powered and is in unknown working condition.   Model 10L-RAF15-S10.  Call Bronson 574-210-3721 Item is located at 21708 SR 119 Goshen IN. 46526

2909

Eliminator 240 Waste Oil Heater
It is unknown the last time it was used, appears to be complete, 240'000 BTU.  Call Bronson 574-210-3721 Item is located at 21708 SR 119 Goshen IN. 46526

2910

John Deere 6329 Power Unit
120 HP. 2700 hours. Murphy Controls. Used clutch. In good condition. Runs very nice. Located at 206 Vine St, Wolcottville IN 46795. Contact Gaylord 574.536.1646 with any questions.

2911

GM 471 Detroit Power Unit
With a clutch. 10,204 hours. Location: 2239 Township Road 262, Bergholz OH 43908. Contact Gaylord 574.536.1646 with any questions.

2912

292 General Mfg 48" Blower
15" intake - 15" outlet. 40 HP electric motor. Very little wear. Heavy duty. Location: 7642 Highway 223 S, Viola AR 72583. Contact Gaylord 574.536.1646 with any questions.

2913

Bailey Mfg 50" Blower
17" intake - 17" outlet. No motor. Medium grade blower. Good condition. Location: 7642 Highway 223 S Viola AR 72583. Contact Gaylord 574.536.1646 with any questions.

2914

Hydraulic Pack
18" x 57" x 21'' tall tank. 30 days removal. Rigger Ernest Ellis  936-245-2751 Located at 20345 US 31 Vinemont, AL 35179. Call Zach with any questions at 931-224-0699.

2915

Operator's Cab
Has AC, 5' x 6' x 7' tall,  30 day removal. Rigger: Ernest Ellis 936-245-2751  Located at 20345 US 31 Vinemont, AL 35179. Call Zach with any questions at 931-224-0699.

2915A

Infeed Rolls for Gang Saw
54"x22'6", Electric drive w/ gearbox, 10 1/2"x36" rolls, 24" spacing, (2) 44" 2- way transfers, Air powered adjustable infeed. Located at 20345 US 31 Vinemont, AL 35179. Call Zach with any questions at 931-224-0699.

2915B

Outfeed Rolls for Gangsaw w/ 6 Strand Transfer
64"x17' transfer, Electric drive with gearbox, 8"x54'' rolls, 36" spacing, 7'x24'. Located at 20345 US 31 Vinemont, AL 35179. Call Zach with any questions at 931-224-0699.

2916

Electric Motor
20 HP, C-phase mount, 1,760 RPM, 480V, almost new condition.  15 days removal. Trucking: contact Darrin: 574-349-8485 Located at 206 Vine Street, Wolcottville, IN 46795 Contact Zach: 931-224-0699

2917

Electric Motor
20 HP, C-phase mount, 1,760 RPM, 480V, almost new condition.15 days removal. Trucking: contact Darrin: 574-349-8485 Located at 206 Vine Street, Wolcottville, IN 46795 Contact Zach: 931-224-0699

2918

Electric Motor
20 HP, C-phase mount, 1,760 RPM, 480V, almost new condition.15 days removal. Trucking: contact Darrin: 574-349-8485 Located at 206 Vine Street, Wolcottville, IN 46795 Contact Zach: 931-224-0699.

2919

Electric Motor
20 HP, C-phase mount, 1,760 RPM, 480V, almost new condition. Located at 206 Vine Street, Wolcottville, IN 46795 Contact Zach: 931-224-0699.

2920

Electric Motor
20 HP, C-phase mount, 1,760 RPM, 480V, almost new condition.15 days removal. Trucking: contact Darrin: 574-349-8485 Located at 206 Vine Street, Wolcottville, IN 46795 Contact Zach: 931-224-0699.

2921

Electric Motor
20 HP, C-phase mount, 1,760 RPM, 480V, almost new condition. 15 days removal. Trucking: contact Darrin: 574-349-8485Located at 206 Vine Street, Wolcottville, IN 46795 Contact Zach: 931-224-0699

2922

Riley Chain Type Buck Saw
5' bar, 18' bed. Located at463 Old Camden Road, Parsons, TN 38363  30 day removal  M-F 8-4.  Loader on site. Contact Zach for more info: 931-224-0699

2923

Tiger Cat T234 Bar type cut off saw
4' bar, 3/4" chain. Located at463 Old Camden Road, Parsons, TN 38363 30 day removal M-F 8-4. Contact Zach for more info: 931-224-0699

2924

Huldins Dean Super Cut Saw
bought out by Rotor Bec. Came off of a Prentice Loader. Located at463 Old Camden Road, Parsons, TN 38363 Contact Zach for more info: 931-224-0699

2925

HMC Model 1 DCAC/DC carriage drive
(sn: 147-99) 75 HP, Paramax Model PX803592YRL11.2 (sn: F696475) includes the cable, cable sheave, control panel, and Industrial Electric service. Located at463 Old Camden Road, Parsons, TN 38363 30 day removal M-F 8-4. Contact Zach for more info: 931-224-0699.

2926

17'x10.5' Log Deck
with H78 chain, 3 strand, Tulsa Winch Drive, 3 arm stop & loader.  Stup for hyd. Motor.  Out and ready to load.  Located: 463 Old Camden Road, Parsons, TN 38363  30 days removal.  Loader on site to load.  Agent: Zach Kittrell 931-224-0699

2927

200 HP Electric Motor
1788 RPM 445T Frame.  Out and ready to load.  Loader on site.  Located: 463 Old Camden Rd, Parsons, TN 38363.  30 days removal  Agent: Zach Kittrell 931-224-0699

2930

2003 Weinig Hydro Mat 23 (6) Head Moulder
complete with Electrical console, no tooling, Mdl. H23, (sn 98848) with pallet of spare parts including outfeed rollers. Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699

2931

2006 Weinig Powermat 1000 (6) Head Moulder
machine number 106591. Infeed missing, no tooling, but includes control panel. Taken out in November 2021. Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699.

2932

Dip Tank
for 16'x8' Lumber packs. Cable lift with lifting winch and electrical controls, 13x26' outside diminsions if the drive is cut off. Height: 10'6". Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699

2933

Dip Tank
for 16'x8' lumber packs. Hydraulic lift 13'x26' overall diminsions. Tank 8' tall includes the 15 HP Hydraulic pack and electrical. Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699.

2934

32' Roll Case
(13) 8'x8" rolls, hydraulic drive, supports to the ground. No Hyd. Power. Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699.

2935

Timesaver 200, mdl: 252-1-1C 48" 2 head sander
Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699.

2936

Rand Bright 42" single head sander
with controls attached. Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699.

2937

Stand Alone 4 Bag Dust Bagging System
with blower. Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699.

2938

8' 3 arm 20 HP drive motor
Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699

2939

Western Pneumatics 100 HP motor
model 330, BC5-5W (sn: 01-162963-2-1) Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699.

2940

Associated Metal Blower
Model 13-F (sn: 5076-P) with approx. 25 hp motor. Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699.

2941

36" Blower, no motor
Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699

2942

Approx. (60) Fans- 24"
with 3/4 hp motors for pre-dry, 3 phase with frames. Located at 240 Gum Branch Road, Burns, TN 37029. 30 days removal. Agent: Zach Kittrell 931-224-0699

2943

Hasko 10'x24" Feed Table
hydraulic motors, no Hydraulic supply.  Located at 240 Gum Branch Road, Burns, TN 37029  30 days removal.  Agent: Zach Kittrell 931-224-0699

3000

Whirlwind Chop Saw
Model 212L, up cut saw, hydraulic drive with air lift, no blade, comes with 3' rollcase, in working condition. Located at W. 1250 C.R. HH, New Holstein, WI, 53061. Contact Tim Graber 269-986-5693.

3011

Rousselle Punch Press
Model 2G, SN CG11737, is in fair condition, Located at 4575 S 600 W Topeka, IN 46571. Contact Jonathon with any questions at 574-349-4380.

3012

AC-225 Arc Welder
MN AC-225, It is on wheels. It can be delivered to Holmes County, OH or Middlefield, OH for a fee of $10.00. Located at 18915 Brake Shoe Rd Meadville, PA 16335. Contact Jonathon with any questions at 574-349-4380.

4000

4/4 CN Better Eastern White Pine Lumber
107 board feet, 4' long, 8-12" wide, Kiln Dried 6-8%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4001

4/4 S/B Hickory Lumber
Lumber is cracked/end splits, 281 board feet, 12' long, 7" wide. Kiln Dried 6-8%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4002

6/4 Rustic Hickory Lumber
Lumber is cracked/end splits, 350 board feet, 5-7" wide, 10-14' long. Kiln Dried 11-12%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4003

4/4 S/B Hickory Lumber
Lumber is cracked/end splits, 136 board feet, 5 1/2"x10" wide, 8' long. Kiln Dried 6-8%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4004

4/4 S/B Hickory Lumber
Lumber is cracked/split ends, 440 Board feet, 9-10' long, 5-12" wide. Kiln Dried 6-8%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4005

8/4 S/B Sap Maple Lumber
206 board feet, 2' long, 6-8" wide, Great Toymaker stock. Kiln Dried 6-8%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4006

5/4 S/B Hickory Lumber
49 board feet, 2' long, 5-9" wide, Great Toymaker stock. Kiln Dried 6-8%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4007

5/4 S/B Hickory Lumber
271 board feet, 4' long, 6-10" wide, Great Toymaker stock. Kiln Dried 6-8%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4008

Rough Cut Cherry Slab
2 1/4" thick, 18-24" wide, 68" long. Kiln Dried 6-8%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4009

5/4 S/B Red Oak Lumber
2' long, 6-10" wide, 103 board feet, Great Toymaker stock. Kiln Dried 6-8%. Located at 3030 W 100 N LaGrange, IN 46761. Call Eugene at 260-350-8953.

4807

Prince Hydraulic Cylinders
2 pc. Like new,3" bore w/12"stroke, 2 pc. used 2" bore w/8" stroke. Located at:1268 Burkley Rd. Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

4808

3/4" Poly Strapping and Tools
Tightener and Crimping Tools, Roll of Strapping, good condition. Located at: 1268 Burkley Rd,, Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

4809

Retracting Air Hose Reel
Includes 15' air hose,works Located at: 1268 Burkley Rd. Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

4810

300 Gallon Fuel tank on stand
Has filter and hose. Stand is weak but could be fixed. Located at: 1268 Burkley Rd, Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

4811

Miller Welder
165Amp Onan V-Twin gas engine, rough but still welds, Located at: 1268 Burkley Rd, Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

4812

12v Starter
Fits John Deere 350 C dozer, has been rebuilt, located at: 1268 Burkley Rd, Cadiz, Kentucky. Contact Eugene with any questions at 260-350-8953.

4816

Trailer tires and Rims
10.00-15 Like new tires used once Located at: 5191 E. St. Rd.236, Rockville,IN Call Jonathon 574.349.4380

4817

Cummins 8.3 Engine
Model # 505-8.3 Serial # 21194150, Includes radiator, Control box, for stationary unit Meter reads 9800 hrs. Unit was taken out of Samsung wheel loader, and is compatible with Volvo,in good condition Located at:5191 E.St.Rd.236 Rockville,IN. Call Jonathon 574.349.4380

4818

Loader Wheels
Tires and Rims off of Samsung SL180 wheel loader, compatible with Volvo 2 pc. good condition 23.5-25 tires Located at: 5191 E. St. Rd. 236 Rockville, IN. Call Jonathon 574.349.4380
 

4819

Dirt Bucket
Pin on, fits Volvo,112" x 44" good condition Located at:5191 E. St. Rd. 236 Rockville,IN. Call Jonathon 574.349.4380

4820

Platform Scales
90" x 120" platform, 55,000 lb. capacity Model EZ-2400 Digi-Star Condition unknown Located at:5191 E. St. Rd. 236 Rockville, IN 47872. Call Jonathon 574.349.4380

4821

Weight Sensor Legs for platform Scales
4pc.16" high,1 extra sensor, 60,000 lb. capacity rating, J-Star control panel, Condition unknown, Located at: 5191 E. St. Rd. 236 Rockville, IN. Call Jonathon 574.349.4380

4822

Fairbanks Platform Scales
Model # 50-5005 Serial # G833350 FT 36" x 46" platform 8,000 lb.rating good condition Located at: 5191 E. St. Rd. 236 Rockville, IN. Call Jonathon 574.349.4380

4823

Machinest Block Brown & Sharpe Surface Plus
black granite, 24'' x 18'' x 4''. Located at:5191 E. St. Rd. 236, Rockville, IN 47872. Call Jonathon 574.349.4380

4824

Exide 24 V Charger
MN SSC-12-5502, single shift charger, 120 V, 24 V battery charger. Located at:5191 E. St. Rd. 236, Rockville,IN 47872. Call Jonathon 574.349.4380

4825

Industrial Upcut Saw
14'' blade, hydraulic drive, hook up ready. Located at:5191 E. St. Rd. 236, Rockville,IN 47872. Call Jonathon 574.349.4380

4826

Craftsman 6 1/8'' Planer/Jointer
MN 152.217060, SN 0132-W, 1 hp electric, 3450 RPM. Located at:5191 E. St. Rd. 236, Rockville, IN 47872. Call Jonathon 574.349.4380

4827

Larin 2 Ton Engine Hoist
hydraulic lift, very good condition. Located at:5191 E. St. Rd. 236, Rockville, IN 47872. Call Jonathon 574.349.4380

4828

Platform Lift
air cylinder lift  with foot pedal activated, 22'' x 46'' platform, 32'' high. Located at:5191 E. St. Rd. 236, Rockville,IN 47872. Call Jonathon 574.349.4380

4829

Grizzly Metal Cutting Lathe
MN G9972Z, SN 780189, 5'' x 24'' capacity, electric drive, very good condition. Located at:5191 E. St. Rd. 236, Rockville,IN 47872. Call Jonathon 574.349.4380

4830

Multi-Purpose Gear Lube GL15 & Grease with Air Pump
55 gallon still sealed, SAE 85W-90, barrel with air pump grease, Located at:5191 E. St. Rd. 236, Rockville,IN 47872. Call Jonathon 574.349.4380

4831

Auger with Skid Steer Attachment
Hydraulic drive, 2 pcs. 10'' augers, 1 pc. 7'' auger.Located at:5191 E. St. Rd. 236, Rockville,IN 47872. Call Jonathon 574.349.4380

4832

Portable Hacksaw
Briggs gas motor, 1 1/4'' x 14'' blade, condition unknown. Located at:5191 E. St. Rd. 236, Rockville,IN 47872. Call Jonathon 574.349.4380

4833

Transformer & Electric Cutout Boxes Square D
KVA 75, 3 phase, General Purpose transformer, 1 pc. 200 amp, 1 pc. 100 amp disconnect boxes, Located at:5191 E. St. Rd. 236, Rockville,IN 47872. Call Jonathon 574.349.4380

4834

Fuel Tank on Skids
14' skids, 64'' x 9' tank size, Located at:5191 E. St. Rd. 236, Rockville,IN 47872. Call Jonathon 574.349.4380

4837

Lumber White Oak
540 board feet, 1 1/4''-2 1/2'' thickness, air dried, 12' long, Located at:5191 E. St. Rd. 236, Rockville,IN. 47872. Call Jonathon 574.349.4380

4838

White Oak
297', 13 pcs., 2 1/2'' slabs, 5' 10'' long, 1 & 2 sided live edge, Located at:5191 E. St. Rd. 236, Rockville,IN. 47872. Call Jonathon 574.349.4380

4839

Walnut Kiln Dried
255',1''-2 3/4'', random width, 6'-8' long, Located at 5191 E ST RD 236 Rockville, IN. Contact Jonathon with any questions at 574-349-4380.

4840

Walnut Live Edge Kiln Dried
Walnut 4'' thick x 5', 3 pcs., 4-live edge pcs. 2 3/4'' x 6' Ash, 5 pcs. Hackberry 2 3/4'' x 6' live edge, 4 pcs.2 3/4'' x 18'' x 8' 10'' sycamore square cut, . Located at 5191 E ST RD 236 Rockville, IN. Contact Jonathon with any questions at 574-349-4380.

4841

Poplar
400', 10'-16' random lenght & width, 1 1/4'' thick. Located at 5191 E ST RD 236 Rockville, IN. Contact Jonathon with any questions at 574-349-4380.

4842

Honeylocust Kiln Dried
74', 15/16'' x 8' random width. Located at 5191 E ST RD 236 Rockville, IN. Contact Jonathon with any questions at 574-349-4380.

4843

Mixed Species
130', 8' -12' long, 1'' - 2'' mixed species, random width. Located at 5191 E ST RD 236 Rockville, IN. Contact Jonathon with any questions at 574-349-4380.

4844

Mixed Species
80', 8'-12' long, 1''-2'' mixed species, more walnut. Located at 5191 E ST RD 236 Rockville, IN. Contact Jonathon with any questions at 574-349-4380.

4845

Red Oak
326', 1 3/4'' x 10', random width,some live edge.Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4846

Hickory
250', live edge, 1''-1 1/4'' x 10'. Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4847

Mixed Species
110', 8'-12' long, random thickness, some walnut & some cherry. Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4848

Poplar
256', 1 1/2'' x random width, 14' & 16' long, some live edge. Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4849

Walnut Live Edge
7 pcs., 2'' x 11', Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4850

White Oak
319', 1'' & 1 3/8'', random width, 9' long, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4851

Red Oak & Hickory
112' 15/16'', one side surfaced, 6'-8' long, random width, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4852

Hickory Live Edge
390', 1'' thick, 12', Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4853

White Oak
1 side live edge, 2 3/3'' x 24'' x 12', 5 pcs., air dried, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4854

Hickory Live Edge
315', 1 3/4'' x 12'-13', random width, live edge, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4855

W.O.
187', 1 1/4" x random width, 15'-16' long, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4856

H.M.
1 piece 4" x 12 1/2" x 12', 2 pieces 4" x 9" x 9' 10", air dried for 4 years, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4857

Walnut and R.O.
1200', 1" random width, 15'-16' long, approximately 4 layers walnut, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4858

Kiln Dried Hickory
190', 1" x 12', random width, some live edge, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4859

W.D. Air Dried Live Edge
400', 1" to 2 3/4" random width, live edge, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4860

Kiln Dried Black Cherry
483', 1" x 6'-8' long, random width, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4861

Kiln Dried Cherry
247', 1" x random width, 10'- 12' long, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4862

Sand Paper Wide Belt
37" x 60", 8 piece 60 grit, 5 piece 150 grit, 5 piece 80 grit, Located at 8639 North Wapalo Rd. Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4864

Kiln Dried Mixed Hardwoods
1115', 1" random width, 12' long, Located at 5006 950 N Marshall, IN.Contact Jonathon with any questions at 574-349-4380.

4865

Kiln Dried Mixed Hardwoods
540', 1" random width, 10' long, Located at 5006 950 N Marshall, IN.Contact Jonathon with any questions at 574-349-4380.

4866

Mixed Hardwoods
330', 1" random width, 8' to 10' long, Located at 5006 950 N Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4867

Mixed Hardwoods, Some Live Edge
930', 1 1/4" random width, 10' long, Located at 5006 950 N Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4868

Kiln Dried Mixed Hardwoods
690', 1" random width, 10' long, Located at 5006 950 N Marshall, IN. Contact Jonathon with any questions at 574-349-4380.

4870

Brewer Gang Saw
MN BB-2480, date 6-8-83, set up for line shaft, Snow Nabsteht Reversing gearbox MN 5102, set up for 3 1/2'' wide with 21 blades, extra 2 15/16'' bearing, includes structure frame with Jack shafts. 1st lot of an entirety. Located at 5353 E ST. RD 236 Rockville, IN 47872. Contact Jonathon with any questions at 574-349-4380.

4871

Detroit Diesel V8
MN 80837305, SN 8VF091478, control panel, low hours less than 1000 hours, Turbo, clutch model SP2180P0, 24 V starter. Part of an entirety lot. Located at 5353 E ST. RD 236 Rockville, IN 47872. Contact Jonathon with any questions at 574-349-4380.

4872

Dustblower
48'', 16'' inlet, 14'' x 16'' outlet, 9'' dust pipe from saw to blower. Part of an entirety lot. Located at 5353 E ST. RD 236 Rockville, IN 47872. Contact Jonathon with any questions at 574-349-4380.

4873

Entirety Lot 4870-4872
With a 10% raise. Located at 5353 E ST. RD 236 Rockville, IN 47872. Contact Jonathon with any questions at 574-349-4380.

4874

12'' Saw Blades
2 1/2'' arbor, 50 pcs. Located at 5353 E ST. RD 236 Rockville, IN 47872. Contact Jonathon with any questions at 574-349-4380.

4875

12'' Blower Pipe
2 pc., 20', elbow, almost new. Located at 5353 E ST. RD 236 Rockville, IN 47872. Contact Jonathon with any questions at 574-349-4380.

4884

Exhaust Heat Exchanger Water Enclosed
12'' x 94'' with 2'' tubes, 4'' exhaust inlet & output, pump water thru for hot water heat, takes 50-250 hp motor. Located at 625E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4885

Swisher Mower
MN Ranch King, 12 hp , gas, 44'', Briggs & Stratton engine with electric start, tractor tongue, 2 blades, air tires, runs well. Located at 625E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4886

Pull Behind 60'' Mower
8.5 hp, Briggs & Stratton IC gas engine, 3 blades, 1 bearing is froze up, air tires, rough condition. Located at 625E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4887

Lumber Cart
4' x 8', one end swivel casters, good condition.Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4888

V Bottom John Boat
12', no title, no leaks..Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4889

Mever Snow Power Angle Light Bar
90'' x 26'' includes mount with hydraulic unit, 12 V. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4890

Dust Conveyor
19'' x 20' with 7'' paddles, no drive.Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4891

Burrows Dust Conveyor
11'' x 12', 5'' rubber paddles, no drive. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4892

Incline Conveyor
29'' x 8' flat section 16'' x 4' electric drive, 12'' paddles with double chain. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4893

2 Strand Log Deck
with stop & load, 7' loading arms, hydraulic cylinder, gearbox with hydraulic motor, 3' x 34'.Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4895

Fiberglass Pipe
20 pcs., 3'' x 30' 6''.Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4896

Fiberglass Pipe
20 pcs., 3'' x 30' 6''.Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4897

Fiberglass Pipe
20 pcs., 3'' x 30' 6''.Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4898

Fiberglass Pipe
20 pcs., 3'' x 30' 6''.Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any question at 260-350-8953.

4899

Hydraulic Pumps
1 double, 1 single pump, condition unknown. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4900

Cornell Starter Control Box
# 2 starters plus smaller ones. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4901

Pallet of Staples
1/4'', 10 case, 100,000 pcs. per case, good condition. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4902

7/16'' x 1 1/4'' Staples Duo-Fast
13 case, 12,000 per case, good condition. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4903

Band Cart
holds 6'' wide rolls, good condition. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4904

Kawasaki
MMN FD750, 27 hp, water cooled, electric start. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4905

Threading Tools
2 handles with 6 dies, 2 pc. 1/2'' die, 2 pc. 3/4'' die, 2 pc. 1'' die. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4906

Electric Motors
3 pc. 5 hp, 1 pc. 15 hp, condition unknown, off of slab saw. Located at 625 E 1250TH Ave Oblong, IL 62449. Contact Eugene with any questions at 260-350-8953.

4920

Corley 2 HB Carriage
10' x 7' overall, air dogs and tapers, 110 V over hydraulic setworks, 5 HP hydraulic unit on board, panagraph, 40" opening, Corley OHMite setworks in cab, fair condition, First lot of an entirety, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4921

Track and Frame with Carriage Drive
Serial # A1809, 54" center to center x 38', support to ground, Tyrone Berry drive unit 5MA 213, 40 HP electric, Part of an entirety lot. Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4922

Corley 56" Husk and Cab
30" x 6' offbear belt with no drive, 54" x 70" cab with steps, heated, some carbide teeth and saw wrench, Part of an entirety lot. Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4923

Schorch Electric Motor
Type KN5315S-BB011, 200 HP, 1480 min. RPM, 160.0 KW, 50 Hertz, 300 A, 460 V, Part of an entirety lot. Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4924

Electric Control Box with Soft Start and Smaller Starters
Weg SSW07, soft start, 48" x 48" x 14" box, Part of an entirety lot. Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4925

Entirety Lot 4920-4924
With 10% raise.  Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4926

Renco Vertical Edger 2 Saw
Electric drive, has hydraulic pump for blade movement, 5 1/2" x 30" capacity, control box, 2 moving saws, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4927

Log Turner
Chain type 36" with double chain, hydraulic drive and lift cylinder, located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4928

2 Strand Log Deck with Stop and Load
8' x 27' electric drive, air cylinder on stop and load includes versa valve, good condition, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4929

Dust Blower
5 electric HP, 18" blower, 6" inlet, 6" x 6" outlet, 40" x 44" x 48" frame, good condition, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4930

Dust Blower
Electric, 22" blower, 8" inlet, 8" outlet, includes 8" PVC pipe coming from saw 7' with elbows, some wear, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4931

Dust Blower
15 electric HP, 22" blower 8" inlet, 8" outlet, 8" PVC pipe going to saw 5' with fittings, some wear, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4932

Electric Main Breaker Box
44" x 7' x 15", includes main breakers for mill, square D Transformer cat. # EE25S38, KVA 25, 52/104 amp, very good condition, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4933

8" PVC Pipe
70' going from 2 blower, good condition, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4933A

Champion Air Compressor on Horizontal Tank
15 electric HP, compressor serial # R30038934, electric cut out box, includes air lines, good condition, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4934

Rollcase with Belt
5 electric HP, 24" x 22', 18" belt, electric drive, good condition, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4935

4 Strand Transfer Deck
8' 6" x 20', hydraulic drive, # 130 rooftop chain, rough condition, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4936

Morbark Stak Trac
Hydraulic powered, opens to 12" track, 30" center to center x 48', panagraph, foot pedal and manual joystick controls, good condition, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4937

Schorch 200 HP Electric Motor
Type KN5315S-0B014, 200 HP, 1785 RPM, 460 V, 160 KW, good condition, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4938

Electric Motors
Reliance 2 HP 1165, 184T, linestart 7.5 HP, 1735 RPM, frame 284, Marathon 10 HP, 1750 RPM, 215 T, Airbanks Morst 10 HP, 1745, RK 234 Fr., condition unknown, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4939

Lincoln Electric Motor
100 HP, 404TS Fr., 1770 RPM, works, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4940

Furnace Blower
20" electric, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4941

Corley Electric Box
24" x 30" x 10", fuses, shutoff, starters, relays, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4942

Electric Boxes, Cutoffs and Starters
Assorted sizes, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4943

Electric Box with Starters
30" x 42" x 18', Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4944

Corley Dublier Power Factor Correction System
38" x 46" x 26", on 24" legs, capacitors and starter systems, Located at 5681 S. St. Rd. 145 Birdseye, IN. Contact Eugene with any questions at 260-350-8953.

4955

Hydraulic Pak w/Cummins engine
5.9L Cummins turbo engine w / intercooler, has clutch direct drive to double hydraulic pumps, jackshaft on side Model B5.9-190 serial # 4541-4712 48" x 42" x 29" hydraulic tank w/filters and hoses meter reads 3149 hrs. Located at:49 James Bowen Rd. Oak Hill, OH. Contact Eugene with any questions at 260-350-8953.

4956

3 Head Morgan Resaw
Hydraulic motors on heads with remote hookup hoses. 15/16" x 24" band wheels, 1.25" bands, hydraulic band tensioner 3 hp electric hydraulic pack not currently being used 6" x 18' feed thru belt w/hydraulic drive good condition Located at: 49 James Bowen Rd. Oak Hill,OH. Contact Eugene with any questions at 260-350-8953.

4957

Keystone Machinery Cant Sizer
6" cutter head, hydraulic drive 10" x 11' feed thru rolls hydraulic driven side press rolls hydraulic driven auger dust Conveyor hydraulic driven good condition. Located at: 49 James Bowen Rd. Oak Hill, OH. Contact Eugene with any questions at 260-350-8953.

4958

Brewer Deduster
Model Br-D.R. Serial # 080492 Lineshaft setup all runs off one hookup 5" wire brushes 6" x 78" feed thru belt good condition. Located at: 49 James Bowen Rd. Oak Hill, OH. Contact Eugene with any questions at 260-350-8953.

4959

Chop Saw
Manual Up it saw, 24" blade Lineshaft ready 14" x 12'6" infeed dead rolls 12"x 5 ' out feed rolls w/material stops good condition. Located at 49 James Bowen Rd. Oak Hill, OH. Contact Eugene with any questions at 260-350-8953.

4960

Belt Conveyor on incline
12" x 27' w/ 14" sides 11.5" belt adjustable legs no drive good condition. Located at: 49 James Bowen Rd. Oak Hill, Ohio. Contact Eugene with any questions at 260-350-8953.

4961

Froedge Deduster
Model # 450LBD, serial # 181, line shaft drive, 8" x 7' feed thru belt, 10" wire brush heads, good condition, owner will load, Located at 49 James Bowen Rd. Oakhill, OH 45656. Contact Eugene with any questions at 260-350-8953.

4962

Baker Turnaround
24" x 4'6", 21" no drive with gearbox, Located at 49 James Bowen Rd. Oakhill, OH 45656. Contact Eugene with any questions at 260-350-8953.

4965

Single Head Notcher
Honda gas engine, condition unknown, 9" head with index carbide tipped manual feed,  Located at. 11165 Hammond Rd. Hillsboro, OH. Contact Eugene with any questions at 260-350-8953

4966

Board Deduster
Double head,Hydraulic drive unscrambler chain fed 8" x 58" bristle brushes good condition,  Located at. 11165 Hammond Rd. Hillsboro, OH. Contact Eugene with any questions at 260-350-8953

4967

25 hp Electric Hydraulic Pak
Double pump w/oil cooler 44" x 27" x 16" tank,  Located at. 11165 Hammond Rd. Hillsboro, OH. Contact Eugene with any questions at 260-350-8953

4968

3 Strand Transfer Deck
8' x 10'6" # 80 roller chain no drive ,in need of repair,  Located at. 11165 Hammond Rd. Hillsboro, OH. Contact Eugene with any questions at 260-350-8953

4969

Belt Conveyor
12" x 13' 5" sides, no drive good condition, Located at. 11165 Hammond Rd. Hillsboro, OH. Contact Eugene with any questions at 260-350-8953

4970

Hydraulic Pak
20 hp electric motor 4' x 3' x 12" tank w/hoses and filters,  Located at. 11165 Hammond Rd. Hillsboro, OH. Contact Eugene with any questions at 260-350-8953

4971

Electric Box
6' x 6' x 12" w/12" legs electric cutout with fuses and starters condition unknown, Located at. 11165 Hammond Rd. Hillsboro, OH. Contact Eugene with any questions at 260-350-8953

4972

Electric Motors
1 pc Lincoln 30 hp ,1755 rpm,286T frame 1 pc Lincoln 25 hp,1765 rpm,284T frame 1 pc Leroy 20 hp,1740 rpm,256T frame 6 pc smaller motors condition unknown,  Located at. 11165 Hammond Rd. Hillsboro, OH. Contact Eugene with any questions at 260-350-8953

4973

Electric Motors and Gearboxes
1 pc Lincoln 30 hp 1755 rpm ,286T frame 1pc Marathon 5 hp 1745 rpm 184T frame smaller motors with Gearboxes electric control box w/ relay condition unknown, Located at. 11165 Hammond Rd. Hillsboro, OH. Contact Eugene with any questions at 260-350-8953

4974

Froedge Deduster
8" x 6' feed thru belt, wire brushes, may need some parts to complete, no power, owner will load, Located at 11165 Hammond Road Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4975

Ferro Five FR Series Charger
Model # FR12CE750S, serial # LPIU949291, Scout charger controller, owner will load, Located at 11165 Hammond Road Hillsboro, OH 45133.Contact Eugene with any questions at 260-350-8953.

4976

5 HP Electric Gear
EUTO-Drive gear box, owner will load, located at 11165 Hammond Road Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4977

Allen Bradley Bulletin 646 Starter
Electric motor starter, owner will load, Located at 11165 Hammond Road Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4978

Allen Bradley Starter
Condition unknown, owner will load, Located at 11165 Hammond Road Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4979

Baker Resaw Frame
24" x 46" runaround belt and parts, end frame for returns, owner will load, Located at 11165 Hammond Road Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4980

Belt Conveyor
36" x 18' 6", 29" belt, electric drive, 6" sides, owner will load, Located at 11165 Hammond Road Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4981

Morgan 2 Head Band Resaw
Line shaft setup, 15/16" x 24" wheels, live press down rolls, 6" x 12' feed thru belt, 8" x 7' cant return belt, 1 /4" bands, good condition, owner will load, Located at 11165 Hammond Road Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4982

Miner Edger and Gangsaw
No drive, 1 moving saw, 5 stationary, 13 extra blades 24" and collars, 43" x 7' outfeed power rolls, 6" x 40" capacity, 43" x 9' infeed, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4983

Miner Edger Parts Machine
Owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4984

Cat Diesel Engine and Truck Frame
Model # 3406B, serial # 4MG84098, 330 HP, Turbo with intercooler, fuel tanks, front axle, Eaton Fuller transmission, meter reads 181,639 miles, drive shaft, 10 speed, good condition, owner will rigging and loading through normal business hours or by appointment, located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4985

Fuel Tank on Stand
Hose with nozzle, 275 gallon, 35" x 70" tank, has wet spot on bottom, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4985A

Fuel Tank on Stand
With filter and hose, 37" x 4' tank, owner will rigging and loading through normal business hours or by appointment, located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4986

Hitachi Air Compressor with Honda Gas Engine
Twin tank, runs but rough, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4987

Iron Skids 3 Rail
7" x 25' rail, with log turning paddles, 1 rail is split, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4988

Frick Carriage
16' carriage, hand setworks, foot pedal recode, hand dogs, hand tapers, good condition, owner will do rigging and loading through normal business hours or by appointment, First lot of an entirety. Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4989

Frick Husk 56" and Track Frame
34" center to center x 48' track, 50" x 93" husk, no power, includes cable drum, good 56" saw F style, owner will do rigging and loading through normal business hours or by appointment, Part of an entirety lot. Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4989A

Entirety Lot # 4988-4989
With a 10% raise. Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4989B

Mud saw
6'' wheel with carbide tips, Located at 1720ElmvilleRd.Hillsboro,OH.Contact Eugene with any questions 260-350-8953

4990

Skate Rolls
21" x 20' x 31" high, 2 1/2" x 18 1/2" rolls, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4991

Frick 3 Blade Edger
4" x 32" capacity, 39" x 10' infeed rolls, 39" x 8' outfeed, set up for 2 stationary saws but has part to make 1 saw moving, no power, good condition, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4992

Dust Drag Chain
Includes gearbox drive, 100' chain, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4993

56" Saw Blade F Style
Like new, used 6 months, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4994

56" Saw Blade F Style
Good condition, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4995

Cornell Dust Blower
42", 20" intake, opening, 12" outlet, fair condition, no drive, good condition, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4996

Dust Blower
32", 13" inlet, 8" outlet, needs new shaft and bearings, 10 HP electric, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4997

Shop Built Ripsaw
4 stationary blades, set up for line shaft, gearbox feed, 3 1/2" x 20" capacity, 32" x 78" overall, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4998

Parts for Frick Mill
Belts, wheels grinder, bearing, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

4999

Air Tank
24" x 48" vertical tank, 80 gallon, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

5000

Belt Conveyor
30" x 22', 24" belt, no drive, owner will rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

5001

Kubota Engine
Model # D1105ES, serial # 5KBXL01 1BCB, 24 HP, meter shows 3224 hours, water cooled, clutch and pulley. Owner will do rigging and loading through normal business hours or by appointment, Located at 1720 Elmville Rd. Hillsboro, OH 45133. Contact Eugene with any questions at 260-350-8953.

5002

Van Trailer For Storage
8'x 53' Can be hooked on and moved. Has a title. Located at 17286 St. Rd. 247 Seaman,OH. 45679. Contact Eugene with any questions at 260-350-8953.

5003

Van Trailer For Storage
8' x 53' Can be hooked on and moved. Has a title. Located at 17286 St.Rd.247 Seaman,OH. 45679. Contact Eugene with any questions at 260-350-8953.

5005

Raised garden Beds
4 pc. 4' x 4' x 2' treated pine. Located at 9599 Applecreek Rd. Fredericksburg, OH

5006

Raised garden Beds
4 pc. 4' x 4' x 2' treated pine located at 9599 Applecreek Rd. Fredericksburg, OH

5007

Raised garden Beds
4 pc. 4' x 4' x 2' treated pine located at 9599 Applecreek Rd. Fredericksburg, OH

5008

Raised garden Beds
4 pc. 4' x 4' x 2' treated pine located at 9599 Applecreek Rd. Fredericksburg, OH

5009

Raised garden beds
4 pc. 4' x 4' x 2' Treated pine located at 9599 Applecreek Rd. Fredericksburg, OH

5010

Raised garden Beds
4 pc. 4' x 4' x 2' treated pine located at 9599 Applecreek Rd. Fredericksburg, OH

5011

Raised garden Beds
4 pc. 4' x 4' x 2' treated pine located at Applecreek Rd. Fredericksburg, OH

5012

Raised garden Beds
4 pc. 4' x 4' x 2' treated pine located at 9599 Applecreek Rd. Fredericksburg, OH

5013

Raised garden Beds
4 pc. 4' x 4' x 2' Treated pine located at 9599 Apple creek Rd. Fredericksburg, OH

5014

Raised garden Beds
4 pc. 4' x 4' x 2' treated pine located at 9599 Applecreek Rd., Fredericksburg, OH

5015

Raised garden Beds
4 pc. 4' x 4' x 2' treated pine , located at 9599 Applecreek Rd. Fredericksburg,OH