Partial Listing:

Knight 3030 Feed/Mixer Wagon, Hay Knives Approx 1 Year Old, 300 Cu Ft, Scale in Working Order, 540 PTO, Never Been Rebuilt, All Original, Comes with a Few Extra Knives/Parts, Has Owners Manual, In Working Order Per Seller

1987 Peterbilt Day Cab, 9 Speed Eaton Fueller Transmission, CAT 3306 Engine, 11R22.5 Fronts, 11R22.5 Rears on Steel, 1,011,733 Miles, Engine Heater, VIN: 217872

1989 Wilson Pace Setter Hopper Bottom, Roll Tarp (New in 2019), 11R24.5 Rears on Steel, Spring Ride

John Deere 468 Silage Special Baler, Approx 17,200 Bales, Mega Wide Plus Pickup, Liquid Applicator (No Liquid Applicator Monitor), New Belts in 2020, 21.5L-16.1SL Tires, Cover Edge Net Wrap, Makes 4 x 6 Bales, 540 PTO, Baler Has Monitor

Hagedorn 275 Manure Spreader, Hydra Push, Poly Floor and Sides, Slope Gate, Dual Horizontal Rear Beaters, 1000 PTO, 385/65-22.5 Tires, 275 Cubin Foot, Approx 15’ Long and 6’ Wide Inside to Inside, All New Bearings on the Driveshaft and Beaters and Cylinders were Recently Rebuilt

1974 International 966, 2wd, 2 Hydraulics, 540/1000 PTO, 3pt (No Top Link) 480/80R38 Rears, 10.00-16 Fronts, Unknown Hours, SN: 027231

2012 Sunflower 4530 24' Disc Chisel, Extra Heavy Duty 3 Bar Harrow, Discs in Front are New, 3" Twist Shovels are New, Walking Tandems, No Welds, SN: AGCS45300CZ40003419

1995 Peterbilt 378 Daycab, Eaton Fuller 13 Speed T

2016 Case IH Steiger 500 HD, 4 Hydraulics, 4,900 Hours, Deluxe Suspension Cab, Front Weight, Guidance Ready, Duals and Hub Spacers, 710/70R42 Tires, SN: ZFF308267

2018 Aluma 24’ with 5’ Nose Enclosed Trailer, 7’ Wide, 84” Sides, 205/75R14 Tires on 5 Bolt Rims with Spare Tire, Fold Down Ramp Door Front and Rear, Front Walk in Door, Rear Stabilizer Jacks, LED Lights, 2 5/16” Ball

2017 Harley Davidson Limited, 32,610 Miles, Hard Sides, 6 Speed, 160 Miles Since Full Service, LED Lights, Radio w/XM Capability, 107 Milwaukee-Eight Engine, Full LED Display with Navigation Capability, Sheep Skin Seat Cushion, VIN: 633721

Hutchinson 10” x 35’ Conveyor with 7.5hp Electric Motor, Manual Lift, 15” Tires on 4 Bolt Implement Rims (Some Weather Cracking), SN: 907154

1979 International 3588 2+2 Tractor, 18.4R38 Duals All Around, 1000 PTO, 3pt, 3 Hydraulics, Hrs Unknown, SN: 10877

Ford 155 Pull Type Plow, 7/16’s (Can be 7/18’s), Lots of New Parts, SN: WN20463 *Bottoms are the same as White 588 Plow

White 435 Chisel Plow, 12’, S-Tine Leveler, 9.5L-15 on 6 Bolt Implement Rims

Kewanee 1020 Disk, Approx 21’, One Bearing Out on a Wing Gang, Hydraulic Fold, 11L-15 Tires on 6 Bolt Implement Rims

White 588 Plow, 5/18’s, Semi Mount, Lead Coulters, SN: 08790

International 45 Vibra Shank Cultivator, 25’ with Wilrich 3 Bar Coil Tine Harrow, 8.5L-14 on 6 Bolt Implement Rims

10’ Ag Bagger Model G-6000, 84” Rotor, Double Conveyor, Small 1000 PTO, Can Do at Least 250’ Bags, SN: 4015, Always Shedded

1996 Ford F-350, 7.3L Powerstroke Diesel (Uses Some Oil), Crew Cab, 4x4, 8’ Long Box, Ag Hitch, Gooseneck Tip Down Ball, Trailer Control, 180,000 Miles, *Has Transmission Problems, Will Not Currently Move*, VIN: 91307

2000 Case IH STX 375 Quad Track, 4 Hydraulics, 1000 PTO, 5,387 Hours on Engine (8000 Hours on Frame and 50 Hours on Transmission *1 Year Left on Transmission Warranty) SN: JEE0100490 *Recently Been Through the Shop

1987 Case 3594 MFWD Tractor, 10,700 Hours, 3pt, 3

John Deere 2940 Tractor with John Deere 148 Loader

2010 Case IH 730C Disk Ripper, 7 Shank, Spring Shanks, Lead Shanks, 3 Section Fold, Spike Tooth Harrow, 16.5L-16.1 Tires, No Welds, SN: Y7S009769

2017 Wilson Tri Axle Grain Trailer, Model DWH-650B, 50' x 72" x 8', Air Ride, Hopper Vibrators (Front and Rear), Roller Strap Traps, Air Brakes, Aluminum Wheels, Black Outer Skin, Front and Rear Access Ladders, Stainless Corners, Hurricane Straps, LED Lights, 295/75R22.5 Tires, VIN: 2270418

2012 John Deere S660 Combine, 4wd, 1,670 Sep Hours, 2,419 Engine Hours, Power Top, Buddy Seat, Camera, 28.8R42 Duals, *Recent Work order from Midwest Machinery in Madison, MN in Photos, SN: 1HOS660SKC0747398. *This lot is Grouped with Lot 55, Both Lots will Remain Open Until Nobody Has Bid for 2 Minutes on Either Piece.

2017 John Deere 635F Flex Head with Crary Air Reel, Head Will Have: New Sickle, New Stainless, New Poly Liner, SN: 1H00635FLG0785227

John Deere 800 Swather, 18', Gas, Canvas Could Use Some Work, Running Order Per Seller

Bobcat 72" Angle Broom Attachment with Flat Couplers

2018 Unverferth HT36 Header Trailer, 12" Tires, SN: A61190162

1994 International 8200 Daycab, 9 Speed Transmission

2002 Timpte 34’ Super Hopper Bottom, Shur Lock Roll Tarp, Ag Hoppers with Side Hoppers, Spring Ride, 11R22.5 Tires on Steel Rims, ABS, VIN: 2B100083, *DOT’d in August of 2022

Win Power Model 45/25 PTO Generator, 540 PTO, on 2 Wheel Cart, In Working Order Per Seller

John Deere Starfire 3000 Globe, SN: 390047

John Deere Starfire 3000 Globe, SN: 735582

John Deere 2410 Field Cultivator, 62.5’, Converted to Anhydrous Applicator, 30” Row Spacing, 25 Knives, 3 Bar Harrow, Raven Controller, Walking Tandems

2020 NAVI 16RD Camper (Rebuilder), Damaged in Spring Storms, A/C, Power Awning, Was Purchased New and Never Traveled With, Salvage Title, Call for Details

John Deere 612C Chopping Corn Head, 12 Row 22”, Stalk Stompers, SN: 755874

International Model 260 Backhoe, 4x2, 16.9x24 Rear

2010 John Deere 612C Chopping Corn Head, 12 Row 30”, Stalkmaster, Header Height Control, Row Sense, Header, SN: 073582, *Header Trailer IS Included

2014 John Deere 2720 Disk Ripper, 11 Shank, 27’6”, Hydraulic Leveling Rolling Chopping Basket, No Welds, 9.5L-15 Gauge Wheels on Wings, 335/65R18 Tires on Main Frame, Approx 4,500 Acres on Machine, SN: 1A82720XED0-750646

Bobcat 743 Skidloader, 3,229 Hours, Fresh Paint, 10-16.5 Rubber, Kubota Diesel, Standard Controls, Manual Tach, Comes with Approx 60” Bucket, SN: 5019-M-15222

Gehl Model 860 Silage Chopper with 2 Row Head, 1000 PTO, SN: 8685

Gehl Model 800 Silage Chopper with 2 Row Corn Head, 1000 PTO, SN: 2017

2011 Heartland Sundance 5th Wheel Camper, 36’, Sleeps 10, Rear Bunks, Outdoor Kitchen, Lots of Storage, AC/Furnace, Stove, 2 Fridges, Freezer, 3 Slide Outs, Power Awning, 2 TV’s, Red 5th Wheel Hookup, 50 Amp Box

(4) 12-16.5NHS Galaxy XD2010 Tires on 8 Bolt Bobcat Rims of S160, New Take Offs

(2) 13.00-24 Solideal Tires, Airless Tires off Telehandler, 10 Bolt Rim

(4) 275/70R18 Continental Contitrac TR, 10 Ply Pickup Tires, 14/32, 5/32, 7/32, and 8/32 Tread

(2) 620/75R26 Goodyear DT 820 Radial Tires, Same as 23.1-26

(2) 13x30, 10 Bolt Waffle Rims off Front of a 7110 Magnum

(2) 320/85R34 Michelin Agribib on Silver Rims off Case MCM155

(4) 275/65R18 Goodyear Wrangler Fortitude HD Tires, 8/32, 8/32, 7/32 and 6/32 Tread

(4) 285/75R16 BF Goodrich All Terrain 10 Ply Tires on 1999-2002 Dodge Factory Rims Painted Black

(2) 24/5x32 Firestone Super All Traction on 10 Bolt Silver Rims off 1660 International Combine (Will Also Fit Grain Cart)

Sitrex QR10 10 Wheel Pull Type V-Rake, Hydraulic Lift, 15” Tires on 5 Bolt Rims, SN: 211178

King Kutter CAT 1 3pt One Row C-Tine Cultivator

25 Gallon CAT 1 3pt or UTV Sprayer, High Flow Pump, Folding Boom (Approx 12’) with Hand Wand

John Deere 643 Corn Head, 6 Row 30”, Worked When Put Away

1978 John Deere 7700 Combine, 3559 Hours, 23.1x26 Fronts, 11:00x16 Rears, Hydros are New, Return Elevators Have Been Replaced, Lots of Other Misc Work Has Been Done on Machine

Minnesota Running Gear Converted to Header Trailer by Clingman Welding in Wheaton, 8 Ton 6 Bolt Hubs, Works for 25’ Head

John Deere 400 Grain Cart, Front Let Unload, Lower Auger Unit Has Been Rebuilt, New Drive Chains and Sprockets, 1000 PTO, 20:00 x 20 Rubber, 400 Bushel

New Holland 499 Haybine, 12’ Cut, Good Rolls, Swing Cylinder Leaks a Little Oil, Otherwise Works as it Should Per Seller

New Idea 486 Round Baler, Makes 5 x 6 Bales, Twine Tie, Monitor Works on Manual Tie Only, Gearbox Seal Leaks but Works as it Should Per Seller, Belts are Good

Unverferth HT30, 30’ Header Trailer, 7.50-10 Tires

Feterl 8” x 51’ Auger with 5hp Electric Motor

Lorenz Model 100 Hammer Mill with Scale, 540 PTO, SN: 100-9546

Westfield J207-46 Auger, 540 PTO, SN: 62021

1995 International 8100 Grain Truck, Tri Axle, Tag 3rd Axle, Cummins M11 Engine, 10 Speed Transmission, Spring Ride, 22.5 Tires, Air Brakes, 160 Gallon Fuel Capacity, 22’ Steel Box Approx 720 Bushel, Working Hoist with Rear Controls, Safe-T-Pull on Front, 3 Way Endgate, VIN: 204555

Balzer 2000 Stalk Chopper, 20’, 1000 PTO, Bearing is Out in the Center and Will Need Repair, SN: 3930

Kewanne Model 1020 Tandem Disc, 20’, Hydraulic Wings

John Deere 7720 Combine, 18.4x38 Fronts, 14.9x24 Rears, Shows 2,640 Hours (Hour Meter No Longer Works), Engine is Strong, Hydraulics Could be a Little Weak, Lots of Parts Have Been Replaced, SN: 508064

John Deere Model 643 Corn Head, 6 Row 30”, Working Order Per Seller but Could Use a New Snout

John Deere 920 Bean Head, Adjustable Reel, 20’ Flex Head, SN: 632310

John Deere Model 643 Corn Head, Converted to 8 Row 22”, Oil Bath Chain, Full Poly Snoots

2014 Polaris Ranger 900, Electronic Power Steering, 7,945 Miles, Chrome Rims, Dump Box, Receiver Hitch, Winch, Windshield (Has Crack), LED Light Bar, 4x4, Comes with Soft Doors

John Deere 2630 Display, Has New Screen and Speaker, SF2 Auto Trac

2015 Ice Castle Lake Minnetonka, 8’ x 16’, 6 Holes, Electric Lift Bed, Arctic Insulation Package, Spray Foam Floor and Walls, AC, 40K BTU Furnace, Very Little Use, Everything Works as it Should Per Seller, Spare Tire, Tv’s and Fridge are NOT Included, Insurance Totaled in Spring Storm, Minor Exterior Damage, Salvage Title, Call for Details

1991 Demco GF250 Gravity Box on Demco Running Gear, Extendable Hitch with Spring Assist, Side Extensions, Rear Hitch, 385/65R22.5 Tires on 8 Bolt Implement Rims, Has a Few Dings and Scratches

1996 Demco 365 Gravity Box on RGL12 Demco Running Gear, Extendable Hitch with Spring Assist, Side Extensions, Rear Hitch, 385/65R22.5 Tires on 8 Bolt Implement Rims, Rear Lights and Rear Light Hookup, Has a Few Dings and Scratches, SN: 96499

Oliver 1555, 2 Hyd, 3pt, 16.9x34 Rears, 7.50x15 Fronts, 6 Cylinder, Gas, Hydra Power Drive, Tuned Up Past Fall, SN: 21022

John Deere Model 920 Flex Head, Adjustable Reed, 20’, SN: 637042

John Deere 6620 Combine, 2,669 Hours, 11:00 x 16 Rears, 23.1x26 Fronts, SN: 404271, Working Order Per Seller

John Deere 980 Field Cultivator, 27’ with 6” Spacings, 7” Sweeps, 3 Bar Harrow, 3 Section

Picket Edible Bean Lifter with Row Dividers, 3pt Hookup

International 1440 Combine, 23.1x26 Fronts, 11:00 x 16 Rears, Shows 5,239 Hours, SN: 08051

International Model 863 Corn Head, 6 Row 30”, SN: 000935

(2) Sets of Calf Pens, 8 Pens Per Set (16 Pens Tot

Case 600 Silage Blower, 540 PTO, SN: 19375, Working Order Per Seller

John Deere 2800 6 Bottom Semi Mounted Plow, SN: 011565A

Alloway 20’ Stalk Chopper, Small 1000 PTO, New Bearings in Middle of Drums, 9.5L-15 Tires, SN: 5271521

Bobcat 811 Skid Loader Backhoe Attachment, 20” Bucket, Low Flow Hydraulics, In Working Order Per Seller, SN: 630003318

2004 Bobcat S130 Skid Loader, Kubota Diesel, 8,435 Hours, Hydraulic Quick Tach, Cab, Heat, SN: 52461308

2009 Bobcat S130 Skid Loader, Diesel, 9,254 Hours, *New Motor Approx 50 Hours Ago, Cab, Heat, Hydraulic Quick Tach, with 5’ Bucket, SN: A3KY35013

1989 Monon 28’ Van Trailer with (2) 1,500 Gallon Poly Tanks, (1) 35 Gallon Inductor, (1) 65 Gallon inductor, (1) Generac CW20 2” Transfer Pump, All 2” Plumbing, Banjo Fittings, Spring Ride, 295/75R22.5 Tires

4 Wheel Header Trailer, Adjustable Brackets, Was Used on 35’ Bean Head, 15” Tires on 5 Bolt Rims

1996 Chevrolet 2500 Extended Cab Long Box, 6.5L Diesel, 4x4, Engine Has a Fuel Problem, 220,020 Miles

(2) 200 Gallon Tanks with Mounts and Quick Fill

1998 DCT Trailer, Fully Equipped for Bulk Oil Delivery, Pumps, Meters, Tanks and Host Reels, (1) 550 Gallon and (1) 450 Gallon Tanks, Trailer is 18’ x 7’, 7:50x16 Tires on 8 Bolt Rims

10’ x 6’ Galvanized Box on Minnesota Running Gear, Hydraulic Lift

Allied Hydraulic Loader, 7’ Bucket with Mounting Brackets, Came off John Deere 4020

Harvestec 6 Row Chopping Cornhead, Currently Set up for Gleaner Combine

Gleaner 3000 Bean Head, 30' With Crary Air Reel, *Has Damage on One End of the Reel

1966 Chevrolet ½ Ton Pickup, 383 Stroker Engine, Automatic Transmission, AC 5200 Miles, Completely Gone Through

(2) Sets of Calf Pens, 8 Pens Per Set (16 Pens Total) Each Pen Has Individual Doors and Bucket Holders, 36” Wide, 53” Long Per Pen

(2) Sets of Calf Pens, 8 Pens Per Set (16 Pens Total) Each Pen Has Individual Doors and Bucket Holders, 36” Wide, 53” Long Per Pen

(32) Black Pales, Fit Above Calf Pens, Buying All One Money

Massey Ferguson 200 With 202 Loader, 2wd, Loader was Converted to Euro Style Hookups, Rear Weight Box, 6’ Bucket, Engine Heater, Power Steering, 14.9-24 Rears, 4 Cylinder Gas, 6 Speed Mechanical Shuttle Transmission, SN: JGA344824

Case 885 David Brown 2wd Tractor, 13.6/12-28 Rears with Woods 72” Belly Mower, 3pt (No Top Link), PTO, 1 Rear Hyd, Power Steering, 6.00-16 Fronts, 3,710 Hours, 3 Cyl Gas, SN: 651733

(32) Black Pales, Fit Above Calf Pens, Buying All One Money

(32) Black Pales, Fit Above Calf Pens, Buying All One Money

John Deere Model 212 5 Belt Pickup Head, Always Stored Inside, Greased and Ready to go Per Seller, SN: 532727

John Deere Model 212 6 Belt Pickup Head, Been Stored Inside, Greased and Ready to go Per Seller, SN: 365777

Minneapolis Moline M602 Tractor, LP, 2 Sets of Hydraulics, 16.9x34 Rears, 6:00x16 Fronts, Model 336-4, SN: 16906222

Hi Cap Model 548 Grain Screener (Complete) SN: 0342

Hi Cap Model 548 Grain Screener, Missing Auger Motor, Needs Repair

1974 GMC 6500 Tandem Axle Grain Truck, 9.00-20 Tires, 18' Steel Box, Steel Floor, Good Runner Per Seller, 5+2 Speed Transmission, 366 V8 Gas Engine, SHows 82,000 Miles, VIN: 604247

Apache 10 Place Creep Feeder

Vern's 10 Place Creep Feeder (Pen Needs Some Work)

3pt Hinicker Head Mover

John Deere 148 Loader, 7' Bucket, All Brackets are there, Came off John Deere 4020, Will Fit 3020 - 4455

(2) 30.5x32 Tires on 10 Bolt Rims

28" Sioux Burner for Grain Bin Fan

Sukup Burner for Centrifugal Fan, Does Have Louvers, 22" x 30"

Approx 1957 Studabaker Commander, 4 Door, V-8, Automatic Transmission, *NO TITLE*

International 686 Tractor, Shows 7,641 Hours, 2 Hyd, 3pt, 15.5x38 Rears, 9.5x15 Fronts, Diesel with Westendorf TA-26 Laoder, Includes Quick Attach Hookups adn Pallet Forks, SN: 12175

International H Farmall with 6' Artsway Belly Mower, SN: 175404

Massey Ferguson Model 2705 Tractor, Powershift Transmission, SHows 4262 Hours,18.4x38 Rears, 11:00x16 Fronts, 3 Rear Hydraulics, 540 PTO, SN: 8851

International 720 Plow, 5 Bottom, 2pt Hookup, Auto Reset, SN: 000633

2018 PJ Gooseneck Flatbed Trailer, 32', (27' Deck with 5' Dove Tail), 235/80R16 Tandems, Front Mount Tool Caddy and Ramps

Alloway Model 1410 Auger, Hydraulic Lift, Swing Hopper, 10" x 60', 540 PTO

2012 JLG Model 1230 ES Lift, 439 Hours, 12' Platfo

2013 Genie GR20 Lift, 19'9" Platform Height, 19'9"

20 Ton Air Hydraulic Jack, New In Box

Case IH 4900 Field Cultivator, 30', Fold up Wings, 3 Bar Harrow, Walking Tandems, Rear Hitch and Plumbed to Back, No Welds, Good Shovels

John Deere Model 1600 Chisel Plow, 16', New Tires, No Welds, Walking Tandem, 3" Twisted Shovels, SN: 019080

John Deere 1610 Chisel Plow, 28', Fold Up Wings, Walking Tandems, 3 or 4 Cylinders Have Been Recently Rebuilt

J+M 350-20 Gravity Box, Extendable Hitch, 20" Side Extensions, Tarp, 11R24.5 Tires, SN: 24916

John Deere Model 980, 44.5' Field Cultivator, 3 Bar Harrow, Walking Tandems, SN: 018098

Wiring Harness for a 2630 John Deere Display, Used on a Polaris Side x Side

Massey Harris 444, Power Sterring, 14.9x38 Rears (New), 6:00x16 Fronts, 5 Speed Transmission with Hi + Low, Live Power, SN: 72645

Brandt 1060 Auger with Swing Hopper, Model MD, 540 PTO, Tires Show Some Weathering, Hydraulic List, 4 Bolt Tires, In Good Working Condition Per Seller

16' x 40' Commercial Truck Semi-Door Draft Paint Booth, Model MT-TFS 4000. Was New in 2018. Disassembled and on Pallets for Shipping. 2 Million BTU Furnace, 7 1/2hp 3 Phase Exhaust Fan and 7 1/2hp 3 Phase Furnace Fan. Was Complete Running Unit When Disassembled in June of 2022. All Duct Work, Fire Suppression, Comptuer Controlled, Complete Per Seller

(5) 24’ Freestanding Panels. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

(5) 24’ Freestanding Panels. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

John Deere Model 510 Round Baler, 540 PTO, SN: 509204. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

Demco Heavy Duty 4 Wheel Trailer, Extendable Hitch, 11R22.5 Tires. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

Industries America Model 440 Header Trailer, 40’ Long, SN: 4402211777. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

4 Wheel Westendorf Trailer, Decent Tires, Extended Pole, 12.5x15 Tires. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

Parker 2600 Gravity Box, 10:00x20 Tires, 12” Extensions, Heavy Duty Running Gear. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

Meyer 3700 Manure Spreader, Dual Beaters, Slop Gate, Poly Floor, Dual Chains, 1000 PTO, 425/65R22.5 Super Singles. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

Demco 365 Gravity Box, Extendable Hitch, Inspection Window, Rear Hitch, 295/75R22.5 Tires. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

(3) 20’ x 50” 6 Bar Sioux Gate, *NEW*. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

(3) Heavy Duty Brown Hiqual Gates, 12’, 5 Bar, Couple Have a Slight Bend on Top Rail. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

Small 1’ Wide Conveyor, Approx 8’ Long and Short One is Approx 28” Long, Untested. Item is Located near Brandt, SD. South Dakota Sales Tax Rules Will Apply. A MN ST3 Tax Form Does NOT Remove Sales Tax. (Call Our Office For Details)

Receiver Plate for Skid Loader

75” Rock Bucket with Grapple, 4” Spacings, Hoses *No Ends*

84” Brush Grapple Bucket with 6” Spacings, Has Hoses and Ends

74” Peak Rock Grapple, Hoses *No Ends*

77” Material Bucket

(2) 361” x 7” Diamond Tread Baler Belting, *NEW*

(2) 361” x 7” Diamond Tread Baler Belting, *NEW*

4 Step, 40” High, 16” Wide, 7” Step

3 Step, 26” High, 15” Wide, 7” Step

32’ Wilrich Field Cultivator, Hydraulic Fold Up Wings, Walking Tandems

Rotavator 7’ Rear Tine Tiller, 3pt Mount, 540 PTO