Lake Erie Equipment Consignment Auction
Previous Page Listing ID#: 1426488

Auction Location

Middlefield, OH 44062
Auction Dates and TimesSALE IS COMPLETED
Friday Oct 28, 2022 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 60 days. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Information
Consignments Wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or John Causey 440.904.0250 (jc2559@gmail.com) fax 440.693.4316.

00
Information Lot
Consignments Wanted! Including but not limited to: sawmill, pallet shop, industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or 440.321.5965 fax 440.693.4316

539Y
Heavy Equipment Key Set 39 Keys
Shipping available for $20

80

539Z
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

81

101
24 Cubes of Assorted Hex Bolts
Grade 5 hex bolts, 1/4'' up to 1'' diameter, socket head bolts

540
New Husquarna
372 XP, SN 2021-1800685, with a 20'' bar

100
6 Cubes of Assorted Hex Bolts
Grade 8 hex bolts, 1/4'' up to 3/4'' diameter

541
Stihl 661
24'' bar, in good condition but has a small oil leak

102
12 Cubes of Assorted Carriage Bolts
1/4''-1/2''

542
Stihl 311
used with a 20'' bar, in good running condition

334

103
12 Cubes of Assorted Nuts, Lock Nuts, and Washers

543
Husquarna 41
used, 18'' bar, SN 95341H0139

335

104
8 Cubes of Assorted Metric 8.8 Hex, Socket Bolts, and Misc. Nuts

550
2012 Cat 259B3 Skid Steer
PIN CAT0259BLYYZ03104, meter reads 3350 hours, two speed, joystick controls, aux hydraulics, has suspended undercarriage, good working condition

336

105
8 Cubes of Assorted Lags
1/4''-1/2''

551
Kubota SVL75-2 Skid steer
Kubota 2015 SVL 75-Z speed track skid steer w/ 3297 hr., tracks are 50% and has standard flow hydraulics, comes with 72" bucket, enclosed cab w/ heat and air, no def fluid

337

106
24 Cubes of Assorted Wedge Anchors, Tapcons, EZ, Lead Anchors, Cable Clamps, and Misc.

552
2018 Bobcat T 590 Skid steer
Bobcat T590 Skid steer w/ 3135 hr., has 78" Bobcat Bucket, heat, air, enclosed cab, standard flow hydraulics, Like new tracks, new step, new quick attach, cylinder, new lights, no def fluid, foot pedal controls.

338

107
24 Cubes of Assorted Wood/Sheet Metal, and Self Drilling Screws

553
John Deere 260 Skid steer
JD 260, 3885.9 hr. showing, SN T002608914003, Stock # 71576 w/ Like new wheels w/ 66" bucket, Nice clean working unit. Fully enclosed cab with heat.

479
Insulation
14 pallets, approx. 225 pieces, 4' x 4' insulation from 1 1/2''-4 1/2''

108
16 Cubes of Assorted Phillips Flat and Pan Head Bolts, and Wing Nuts

480
Insulation
12 pallets, approx. 204 pieces, 4' x 4' insulation from 1 1/2''-4 1/2''

554
2007 Bobcat T300 Skid Steer
Meter reads 6981 HRS. Lot of Rebuilt Parts, SN-532015485, 78" bucket, 18" rubber tracks w/ approximately 50% tread, Hands free quick attach, Auxiliary hydraulic hookup, Enclosed cab - no door, Has heat, AC, radio, and hand and foot controls, Keyless start

109
12 Cubes of Assorted Pins, Bearings, Rivets, Plugs, Wedges, Fasteners, and Screws

555
Kubota SVL 90-2 Skid Steer*
MN SVL90-2, SN 1012654, 7924 hours, has air and heat, has broken glass in door, both windows missing 1 piece of glass, 1 new track and 1 like new, 3010 lb. capacity, runs well but has some wear

485

110
24 Cubes of Assorted All Stainless Steel Bolts, Screws, Nuts, Washers, and Brass Screws

556
Cat 257 Skid Steer
ASV tracks with Cat motor, 3901 hours, SN CAT00257LCMM00730, with hitch, 15'' tracks, fully enclosed cab, air and heat not working, nice clean unit

490

111
9 Cubes of Assorted Grade 5 Hex Bolts
fine thread, 1/4''-5/8'' diameter

494
Pressure Washer
333 hours, Landa Steam Pressure washer, MN PHW53-11021D, 120 V, 1 phase, 1000 PSI, came out of storage, condition unknown

559
Loegering VTS Tracks
Were used on LS 190 NH Will fit most other models. Rubber has less than 75 hrs. 18" wide x 88" x 32", 8 Lug 493/4" center to center of axle, 5 bottom rolls.

112
16 Cubes of Assorted Spacers, Wood Screws, Screen/Storm Door Hardware, and Brass Barb Fitting

495
Brush Cutter*
24'' Bachtold Brush Cutter, Honda G x 270, needs new tire, condition unknown

559A
Skid loader wheel Spacers
Set of 4 Wheel Spacers. 8 Lug.Came off of Case Skid Loader.

113
54 Drawer Cabinet
Loaded with Brass flare, compression fitting, and brass barb fittings

495A

559B
Skid Loader Tires
10-16.5 NHS tires 40% tread left. Solideal Gripper

114
18 Drawer Cabinet
Loaded with drill bits, taps, dies, shaft cover, over 300 pieces!

496
Sprayer
Finco pull behind sprayer 42'' with 12 V pump, looks good

560
Sky Trak
MN 8042, SN 0160028213, 84 hp, 3740 hours, year 2007, new foam filled tires 1 year ago, Right front tire has small air pocket, Cummins Diesel, quick attach 4'' x 60'' forks, runs well and is in very good condition.

580
Yale Forklift
SN 313475, 5000 lb. capacity, forklift #GLPOSORBJUATO86, weighs 9000 lbs., 4'' x 42'' forks, meter reads 9261 hours, 28 x 12.5-15 solid pneumatic front tires with a gas engine, Runs and drives but engine needs tune up. 

115
Cabinet Full of Drill Bits
full of wood, metal, and masonry drill bits, 1/16''-1/2'', 0-80-3/4, over 300 pieces!

497
Craftsman Pressure Washer
4.5 hp, 1800 PSI, gas pressure washer and Craftsman, 4.4 edger trimmer, condition unknown

116
Round Carousel Full of Brass Valves and Copper Fittings
Full of brass valves of all kinds, assorted copper and brass fittings

581
2003 Manitou Forklift
Model TMT320FLHT/W, SN 181149, meter reads 438 hours on new gauge, 5000 lb. capacity, like new tires, has truck mount, Lister Petter Diesel with truck mount, 4-2'' x 48'' forks, 31-15-5-15 tires, 70% rubber on tires, works and runs good

498
Dump Trailer
MN PCT-17JD, 16'' wheels, 39 x 58 x 32

117
Cabinet with Assorted Wire
cabinet has 37 rolls of assorted wire

583
Cat Forklift
Model NOR30P, serial # 2LL-00825, electric order picker, 24 V with charger, 3000 lb. capacity, new battery 2 months ago, comes with 3 phase charger

118
Shelf Full of Electric Outlets, Splitter, 3 Way Switches, and Misc.

585
Hyster Forklift Mast
3 stage, model 190.0/4830-322584, no forks, 16" wide mast

119
Cabinet Full of Assorted Brass Valves, Coupling, and Misc. Plumbing

586
Block Hog Walk Behind Forklift
1400 lb. lift capacity, 77" lowered mast height, runs and operates 

120
Cabinet Full of Brass Compression Fittings, Lots of Brass Fittings and Misc.

587
Clark Forklift
Model CMP30L, serial # 0M230L0480-9586KF, 4" x 48" forks, meter reads 6159 hours, LP gas, solid tires, sideshift, runs good

121
Cabinet Full of Steel Pipe Fittings and Nipples

598
Forklift Forks
6"x43"       20" Mast Plate

122
Cabinet Full of Mostly Galvanized Pipe Fittings

599
Forklift Forks
5"x42"    16" Mast Plate

600
Ford Backhoe
Ford 6500 Backhoe with 24'' and 45'' Hoe bucket, 18.4-28 tires, tires 40%, 85'' wide front bucket, 2 extra down rigger pads, older but runs good, small minor oil leak, New battery, CALP350BSA8187, weight 17,000 lb.

123
Cabinet Full of Mostly Galvanized Pipe Fittings

124
Pallet of Assorted Eyebolts, Lags, Cable Clamps, and All New Hardware

601
John Deere 310 Backhoe
Runs but needs some TLC, S/N 135573T Type 301B

125
Cabinet Full of 1 1/2''-2'' Copper Fittings and 1 1/2''-2'' PVC

602
Asphalt Roller
41" Vibrating Roller, towable with Deutz Diesel, 2 cyl, meter reads 924 hours, Working condition

126
Cabinet Full of Chrome and Brass Plumbing Parts and Misc.

603
Asphalt Roller
Gallion rubber tire roller, 6 cylinder gas motor, runs good, was driven  to the auction site approximately 1 mile, 2496 hours, SN 9RC-12G5071

127
Cabinet Full of Mostly Galvanized Pipe Fittings

610
Crawler Loader
John Deere 455 E Crawler loader, To 455EX717489, meter reads 423 hours, 6'x42' forks John Deere winch

128
Cabinet Full of Copper and Brass Fittings
1/2''-1''

611
John Deere 450D Dozer
John Deere 450D Crawler dozer to 450DC709103, 6981 hours showing, 7' 6'' x 30'' dozer blade w/ John Deere winch

129
Cabinet Full of Galvanized and Regular Pipe Nipples

612
Yanmar Forwarder
C50R, 4413 hr. showing, Like new, 20" Rubber Tracks, 136" long, No Picker, 4 cylinder diesel, 9' x 8" x 7' long deck, needs final drive work. Was running 2 years ago when parked currently not running.

130
Cabinet Full of Galvanized and Regular Pipe Nipples

619
2005 Case 850K XLT Series 2 Crawler Dozer
PIN-CAL004925, 20" tracks w/ 75% tread remaining, 8'6" 6-way blade, 4 cylinder diesel engine, Meter reads 4347 hours, Fully enclosed cab w/ Heat/AC, radio, and joystick controls.

131
36 Drawers of Brass Pipe Fittings and Misc. Plumbing Parts

620
2002 Bobcat 322D Mini Excavator
PIN-223514770, 9" rubber tracks w/ 75% tread, Meter reads 1268 hours, 16'' bucket, Open Cab.

132
72 Drawers Assorted Copper Fittings, Brass Flare, Compression Fitting, and Misc. Plumbing

621
2012 Bobcat E50 Mini Excavator
6300 hours on rebuilt engine, SN-AG3N12349, 4 cylinder Kubota diesel engine, Machine weight - 10,842 lb, Enclosed cab w/ Heat/AC and radio, 16" rubber tracks w/ approximately 70% tread, 78" blade, 24" bucket, 15" hydraulic thumb, Quick attach, Auxiliary hydraulic hookup.

133
3 Cabinets of Drill Bits
1 cabinet of A-Z, 1 cabinet # 60-1, 1 cabinet # 1/16-1/2 (over 500 pieces)

622
20" Bucket
20" Bucket fits Komatsu

134
Pallet of Assorted Screws of all Kinds

622A
36" Bucket
36" Bucket fits Bobcat E50 and more

135
Pallet of Assorted Wood Screws and Washers

622B
16" Bucket
16" Bucket fits Bobcat E50 and more

136
Pallet of Assorted Grade 2 Hex Bolts

622C
12" Bucket
12" Bucket fits Bobcat E50 and more

137
Pallet of Assorted Lags

622F
24" Bucket
24" Bucket Wain Roy coupling Jaw Bucket for excavator Model 003-024

138
Pallet of Assorted Grade 2 Hex Bolts
Assorted sizes

622G
12" Bucket
C-P Enterprises Takeuchi

139
Pallet of Assorted Nuts and Washers

622H
Excavator Bucket
60" wide, 32" deep, 29" high

142
Pallet of Assorted Grade 2 Hex Bolts

623
Blower
Black 13 x 34 Blower, Line Shaft ready, 15" Inlet & Outlet

140
Pallet of Slotted Flat and Round Head Bolts

624
Blower
Green 8 x 26 Blower, 10 HP, 3phase, electric drive w/ collection box, 10" inlet, 8" outlet

143
Pallet of Assorted Carriage Bolts

625
Log Turner
Mellott Log Turner, Hydraulic Drive

141
Pallet of Assorted Lags

626
John Deere Winch
John Deere winch, SN 10WM112511775 w/ cable Worked when taken off of skidder

144
Pallet of Assorted Grade 2 Hex Bolts

627
John Deere Winch
MD10WM112006750, No Cable Worked when taken of off skidder

145
Pallet of Assorted Carriage Bolts

628
Winch
Gearmatic Model 19 winch off 450 Case s/n 16929

146
Pallet of Assorted Slotted Screws and Bolts

629
Woody Log Carrier
Woody CH-130-HD, SN 1707CH130013, 6 wheel log carrier with grapple, Honda HP Motor, hydraulic operated, works good

630
Winch
Hyster D7H winch, MN 677P2219K, SN HY7G15, condition unknown

147
1 Skid Assorted 1 Lb. and 5 Lb. Screws
Approx. 150 lbs.

631
Eager Beaver 1821 Chipper
5-14-21 Mobark, VIN 458S21611LWO26316, 647 hours, 165 HP., gas, PSI 39253643115, has title

148
1 Skid Assorted 5 Lb. Nails
Approx. 185 lbs.

149
1 Skid Assorted 1 Lb. and 5 Lb. Nails
Approx. 150 lbs.

632
Altec Chipper
Model DC12117, SN 5W054151575200148, Cat 3054C Diesel, rusty but runs and works, new battery, does not have right wheels

150
1 Skid of Assorted 1 Lb. Nails
Approx. 186 lbs.

633
Reckart Blower
42'' blower, 12'' wide, 10'' paddles, 2 3/16" line shaft ready, 18'' inlet, 12'' outlet

151
Pallet of Assorted # 3, 6, 8, 10, 12, and 16 Roofing Nails
1 1/2 nails

634
Blower Pipe
9 pcs., 8'' x 14' blower pipe, 2 elbows

152
Pallet of 12-50 Lb. Boxes of Hand Nails
4d, 8d, 10d, 16d, 20d

634A
Blower Pipe
Bill Assorted Blower Pipe fittings

153
Pallet of 8-50 Lb. Boxes
8, 10, 12, 16, drywall nails and screws

635
Mellott log Turner
Hydraulic chain, 36'' chain, excellent condition

155

636
Green Log Turner
40'' chain, hydraulic drive

157
Maytag Wringer
wringer only, Excellent condition and completely rebuilt

637
Meadows Log Turner
# RT 124-92, hydraulic drive, 30'' chain

156
Battery Wheelchair
Quickie Battery Wheelchair, SN M715C-113612 with charger, 2016, Like new condition!

638
Vertical Edger
2-20'' blades, electric over hydraulic, 6 groove pulley

160
Belt Lacer
# 3 6'' chipper, belt lacer, good condition

639
Cornell Blower
9'' x 26'' blower, 10'' inlet, 8'' outlet, 7'' wide paddle, line shaft ready

640
2022 Wood-Mizer LT-40 Portable Sawmill
VIN 456C62414NNHK4969, BRAND NEW MACHINE, came directly from the factory, fully hydraulic, debarker, gas engine, loading arms, log turner

158
Square Maytag Wringer Washer
with electric motor, excellent condition

641
1994 Woodmizer LT 40
1994 LT 40 HDG24 with 12'' extension, 26'' throat, VIN 456A52410RIHE8261, cuts up to 32'', fully hydraulic, no mud saw, 652 hours showing, Onan 24 HP gas motor, 12 extra blades

159
Round Maytag Wringer Washer
with electric motor, no lid, good condition

161
Husky Sprayer
25 gallon, 12V sprayer, no battery, works good

641A
WoodMizer Bands
4 Boxes at 15 Blades each  0.045x1.25x158.10

162
Banding Cart
New in the box!, U Line Model H39

642
Woodmizer Band wheels
LT 40 woodmizer 19'' premier band wheels

168
Electric Grinder
Milwaukee 5'' grinder, with tool bag, like new condition!

643
F8 Simonds*
60'', 56 tooth, 6-7 gauge, good condition

169
Skid of Tee Hinges
6 boxes, 5'' zinc tee hinge nylon bushing, 100 pcs. per box

644
60'' F8 Simonds*
54 tooth, 6-8gauge, good condition

170
Skid of Tee Hinges
6 boxes, 4'' zinc tee hinge with nylon bushing, 100 pcs. per box

645
Frick Mandrel
Frick top Arbor, 1 1/2'' shaft

171
Skid of Tee Hinges
6 boxes, 4'' black tee hinge, 100 pcs. per box

646
Cat Claw Band Sharpener
12 V, working condition

172
Skid of Tee Hinges
6 boxes, 5'' zinc tee hinge, 100 pcs, per box

647
Woodmizer Auto Sharp Control
with 12 V motor, working condition

651
Frick Edger
SN 2867, 27'' wide, 1 adjustable blade, 90'' infeed, 94'' outfeed, 17' 8'' overall,  2-14'' blade with 6'' blower, set up for boards

173
Skid of Screws
6 boxes, 10 x 2 1/2 zinc square drive screws, 2000 pcs. per box

174
Skid of Screws
6 boxes, 10 x 2 black oxide square drive screws, 2500 pcs. per box

652
Frick Gang Edger
SN 5824, size 27, 2-14'' blades, 1 movable blade, 9' in feed, 7' out feed

175
Skid of Screws
6 boxes, 10 x 1 Hex washer screws, galvanized for metal roofing, 3000 pcs. per box

653
Cornell Edger
SN SE249170, 2-18'' blades, 1 movable blade, 36'' wide, 8' in feed conveyor, line shaft ready, needs new feed rolls, in working condition

176
Skid of Screws
6 boxes, 10 x 2 zinc square drive screws, 2500 pcs. per box

654
Miner Edger
SN FB9212, 4'' x 24'', 3 blades, 14'', 2 removable, 6' in feed, 9' out feed

177
Skid of Screws
6 boxes, 10 x 2 1/4 black oxide square drive screws, 2000 pcs. per box

655
Meadows Edger
SN 36D-1832-05, 36'', 3-16'' blade edger, 2 movable blades, 8' in feed, 2' out feed, line shaft ready

178
Chain Links
Pallet of assorted new chain links, Repair from big to small!

656
Lumber Cart
42 x 75 lumber cart, 3 x 8 wheels, 1 1/2 x 4'' metal frame

179
Springs
Pallet of new assorted springs

657
Lumber Cart
42 x 75 lumber cart, 3 x 8 wheels

180
Vac/Air Gauges
All new!, Over 140pcs., up to 2000 PSI

658
Pulley
25" 2 3/8" shaft 3 groove number 3B250R

181
Vac/Air Gauges
All new!, Over 70 pcs., up to 2000 PSI

659
Hemco Trim Saw
Double M trim saw complete (8 blades) with 14'' x 18' waste conveyor, good electronics, extra set of blades and spare parts, 1 saw motor, drive gear box needs rebuilt, taken out of service 7-5-22, 84'' wide x 24' x 100', feeder 76'' wide x 18' 6'' x 60'' tall

182
Allen Wrenches
whole skid of new and used, assorted sizes

660
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

183
Generator
Power Partner 6000WAH, 120/240, Kawasaki wheels need attention, unit works good

661
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

184
Torch Set
Harris torch with cart and tanks, condition unknown

662
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

185
Flagler
SN 2307, sheet metal flagler, works

663
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

186
Crescent Wrenches
18'' and 24'' China Crescent wrenches, Like new!

664
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

187
Electric Tools
GMC Biscuit Jointer, buffer, multi tool, all in working condition

665
Miner Edger
SN FB9142, 24" wide 2-14" Blades, 1 movable, 6' infeed 7' outfeed w/ sawdust Box

188
Machinist Tools
6 pc. Outside micro meter Starret caliper and gauges

666
Lumber Cart
42 x 72 x 16" Lumber Cart, New 2 x 10 Phonelic Wheel, 

189
Drill and Router Bits
Steel drill bits, router bits, taps, some new, approx. 200 pcs.

667
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2 x 10 Phonelic Wheel,

190
Cutting Torch Set
Harris cutting torch with gauges and hose

668
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2 x 10 Phonelic Wheel,

191
Cutting Torch Set
2 boxes, new and used cutting torch, tips and misc.

669
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

192
Roll Chain
2 new rolls, 40LLR, 50', 1 new roll # 80 x 200

670
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

193
Armstrong Stand
# 933, 1/8-1 1/4 Rigid pipe threaders with cutter @ Reamer, good working unit

671
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

194
Rigid Stand
# 460, 1/4-1 1/4 Rigid pipe threader with cutter@ Reamer, good working condition

672
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

195
Oster Pipe Threader
Oster 142-5 Electric portable threader with # 65-R, 1'' - 2'' pipe threader, good working condition

673
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

196
Rigid Threader
model 200, 1 phase, up to 2'' pipe on tripod stand, works good

674
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

200
Grob Metal Cutting Bandsaw
Grob 1977 24'' Metal Cutting Bandsaw, MN 4V-24, SN 1203 with blade welder, 3 phase, 240/480, 24 1/2'' band wheel, 198'' band

675
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

201
Marvel Metal Cutting Bandsaw
MN 712M, SN 712M88251, hydraulic up and down, 2 new 8' 11'' blade, works good

676
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

202
Chain Hoist
Brand new! 10 ton CM chain hoist, SN S3385WP

677
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

232

678
Skate Rolls
2-36'' x 10', 2'' rolls, 1 is missing some rolls

249
Iron Worker
Edwards 75 Ton Ironworker, SN 02847594, box of extra punch dies, electric, 5 HP, 3 phase, good working condition!

679
Skate Rolls
36'' x 10' x 2'' 

250
Iron Worker
Edwards 55 Ton Ironworker, SN 21255500, box of extra punch dies, set up for hydraulic, works

680
Skate Conveyor
35'' x 10'', 3 pcs.

300
Kreg Jig
1996 Kreg Jig Model DK, SN 12474, pocket hole boring machine, air powered foot control, 21 x 38 table, works good

681
Skate Conveyor
35'' x 10'', 3 pcs.

301
Powermatic Bandsaw
Model 81 Bandsaw, 19'' throat, SN 91165, 20'' x 1 1/4'' band wheels, 149'' bands, 1 new extra blade, line shaft ready, works good

682
Aluminum Elevator
5'' x 16', with electric motor works

302
Mini Max Shaper
Model T3, SN KF8279, hydraulic drive, 1 1/4'' spindle, 2 grizzly 1/4 HP, power feeder, Like new! Excellent condition!

683
Edger
Edmiston Edger 2 movable 16" Blade 28" 7' infeed - 6' outfeed, Fully hydraulic. Has small hydraulic leak but works good

303
Delta Shaper
MN 43-431X, SN 06C11561, hydraulic drive with extension table, 2 1/4 HP, Grizzly power feeder, Like new! Excellent condition!

684
Laser Rack
Edger Laser Rack FBW50110R 1000L off of lot 683.

306
Air Motor
6 Model 4AM-NRV-130, all in new condition

685
Belt Conveyer
31' x 14" Conveyer belt w/ Robin Ey 28 Gas Motor

310
Panel Saw
Robland 2320 Panel Saw

686
Morbark Chip Blower
 30 HP, 3 phase, 46" Drum 7' x 18' pipe, 14' overall w/ mounting plate

311
Jointer
PF310, year 1988, 220V, SN 8838, 12 x 84'' bed, 2 extra set blades

687
Cant Sizer
12" Cornell cant sizer, SN 101-12-81, 25 Hp, 230/460 V

312
Jointer
12 x 60'' bed, heavy duty

688
Lumber Cart
48 x 106 x 41 Steel cart, 10 x 2 1/2 Wheel & Drum Cart

313
Chop Saw
DW705 DeWalt chop saw, electric

689
Barn Sweep
Pallet of 16" Barn Sweep Repair Links

314
Rockwell Shaper
SN 117-8110, 27 x 36 table

690
Steel Banding
12 rolls, 3/4'' x .025 banding

315
Radial Arm Saw
18'', Rockwell Radial Arm Saw, MN 40-C-1, SN DT2059

691
5/8 x .020 Banding
12 rolls 5/8" x 0.20 banding

316
Powermatic Planer
20'' planer, 4 straight knives, 3 phase, 220/240

692
Lumber Rolls
36" x72" x34" Lumber Rolls

317
Band Saw
Jet 18'', MN JWBS-18QT3, 18'' wheels, SN 1012965, 3 HP, 230V, 1 phase

693
Lumber Rolls
18" x120" x 34 Lumber Roll

318
Table Saw
10'' Delta unisaw with 52'' fence, 34-802, SN 92L97260

694
Trough Conveyer
Trough Conveyer, 17" Belt, 22' overall, 41" high to 56" high , 3 phase, 1 Hp

319
Router
24 x 32 router table with porter cable router

695
Steel Table
47"x 42" x 38 H.

320
Edge Sander
1 1/2 HP, 3 phase, 4'' x 96''

696
4 Strand Live Deck
6' x 12' x 48" 4 Strand Live Deck, 2 Hp, 3 Phase Electric Drive only 3 strand chain

321
Belt Disc Sander
Powermatic 6 x 24 belt, 12'' disc

697
Plastic Roller conveyer
18" x 10'6" x 35" Eds IDAB Plastic Roller conveyer on casters, 3 phase, 1/2 Hp

322
Powermatic Drill Press
MN 1150, SN 8615V170, .75 HP, 1 phase

698
Sawdust Auger
13" x 34' Sawdust Auger, 3 hp, 3 phase, 208/460V

323
Phase Converter
Phase master model D-15, 10V, 230/460 input, 30V 230/460 output, max 10 HP

699
Roller Conveyor*
42'' x 72'' roller conveyor, with set of 34'' legs, 2'' rollers

324
Work Bench
55 x 64 x 34 butcher block top with 3 vices

699A
Keystone 2 Head Resaw with Runaround System
Electric drive on heads, 1 1/4"x38" band wheels, 1 1/4" bands, 6"x80" feed belt, Air clamps, Has full runaround system - fully hydraulic, 5 strand pop up transfer w/ Rolls and belt - 7'x7', 4x6" rolls w/ 10" spacing, 6"x7' belt conveyor, air cylinder for pop up
Belt conveyor - 6"x10', Hydraulic drive
5 strand pop-up Transfer w/ rolls - Laser lights, Hydraulic drive, 4x6" rolls w/ 10" spacing, 7'x7'
 

325
Electric Motor
5 HP, 3 phase, Dayton electric motor, 3455 RPM, 208, 230/460, works

700
Brewco Single Head Resaw
Model BSBH12, serial # SB1E4148, 9 1/2 '' wide belt, single head, 1 1/2" bands, 28" band wheels, hydraulic drive, condition unknown

326
Air Compressor
Speedaire 1 HP 1 phase Air Compressor with air hose reel

701
Belt Conveyor
48'' x 11' wide belt conveyor, no drive, with adjustable legs

327
Fan
30'' Patton fan, Model 1010MP, 120V

702
Log Arch
Year 2022, 6' long, will handle up to 20'' log, 15'' air tire, hand operated, New condition!

328
Grizzly Dust Collector
2 HP, 1 phase, SN 8866640, 16'' drum

703
Log Arch
Year 2022, 9' long, up to 25'' log, 16'' air tire, with winch and hitch, New condition!

329
Tool Box
2 tool chest on cart, 19 x 52 x 36 with tools

704
Log Arch
Year 2022, 9' long up to 25'' log, 20'' wheel, with winch and hitch, 2000 lb. capacity NEW condition.

500

705
Edger*
30'' Meadows Edger, 2-16'' blades, 1 movable, 7' infeed, 7' 6'' outfeed, working condition

705A
Meadows Edger
Meadows Edger 48" wide 3 16" blades 1 movable 6' 6" infeed 8' outfeed Line ready

706
Saw Grinder Wrench*
BDFS saw wrench and hand saw grinder

707
Blower*
Twin City  37'' x 10'' drum,8'' paddles, 15'' inlet, 12'' outlet, size 915, SN 15-5381231-1, Tag # EF-1 Booster fan, line shaft ready, good condition 

708
Lumber Sled*
48 x 92 x 18'' steel lumber sled, good condition

709
Steel Lumber Sled
48 x 92 x 18'' steel lumber sled, good condition

710
Hydraulic Cylinders
2-49" 3-46" 1-54" 1-65" 2-58" Used but look to be in good condition.

711
Line Shaft and Pulleys
2 Line shafts 1 11' 10" frame with 1131/2" 1 1/2" dia. Line shaft w/pulleys
80" Frame with 86" 1 7/8" Dia. Line shaft w/ Pulleys.

712
Drilling Machine
Hyd. Drive 2 Head Drilling Machine Used for coal mining Roof boards. See sample Working cond.

713
Up cut saw
27.5" Extra blade  Line shaft setup air cylinder 58" table w/ 4 stops.

714
Roll Case
12' x 24" 37" h.  w/ 4 1/2" x 16" HD Rolls gear chain Drive w/ air clamp.

715
Unscrambler
3 strand 108" x 77" x 53" Line raedy Good Cond.

716
Blower
6" blower in good Cond. Line ready

717
Welding Table
30x 90x 32 Welding table.

747
Hyd. Pump and tank
Pabco Hyd. tank and pump 26 x 38 x 20 on frame W/ Vickers 2620v0 K880 Pump and hoses w/ valves Line ready, Good Unit

748
Hyd. cooling Unit
12 volt Fan-Radiator for Hyd. unit

749
Perkins Power Unit
80 HP Diesel 3150 original hrs w/clutch 2 1/4" shaft, and radiator MD 1239/1700  S/N LD70263 U8693630 Good working Unit

750
Detroit Diesel
Detroit diesel, 4 cylinder with Rockford clutch, 2 1/4'' shaft, hours unknown, runs good

751
Kohler Generator
MN 10RCT63-64131C, SN 285735, 1 phase, 10KW, 10KVA 120/240, 41.7 amp diesel generator, Waukesha MN 180DLC, SN 122524, 3034 hours, condition unknown

752
Pow R Quip 240 Welder/Generator
New! .33 hours showing with remote start, 14 HP Kohler motor, no leads

753
Perkins Power Unit
3 cylinder, power unit came off of welder, does not run, condition unknown

754
I Suzu Power Unit
Diesel, no clutch, 3 cylinder, condition unknown

755
Perkins Power Unit
#TU33421U849980W, no clutch, 6 cylinder diesel, 8,621 hours showing and 31,378, ran when taken off of sawmill 3 years ago

756
Diesel Power Unit
Lister #725, 45 HP, SN HR3A3DM-07, 1,759 hours since rebuilt with twin disc clutch, 1 3/4'' shaft, 3 groove pulley, with hand crank, in good working condition. Reason for selling is unit is too big.

757
Gas Motor
1999 Ford gas motor, Model VSG413I6005A, 785 hours, SN 11570-1-07-99, with hydraulic pump, approx. 35 HP, runs good, came out of sweeper

758
Generator
9500 Prolite 519 hrs gas Industrial, Works Good Like new condition. 419 cc motor.

759
J/D Power Unit
 John Deere MD 4024TF270 # PE 4024t011511 Has turbo and radiator No starter condition unknown.

760
Lister Gen-Set
Serial # US1774ST3A29, 30 HP, 2600 RPM, 12 KW generator, 120 or 240 volts, 3 cylinder, on steel frame, works good

761
2019 Deutz
MN TD2.9L4, 49 HP, 2200 RPM, code # C4DI336EU, SN 12440182, looks to be in new condition

762
Power unit mount
Power unit mount w/ 2 1/8x16' Lineshaft 15'x5' Frame 6"x6" Frame

763
Cummins Power Unit
MN 3920701, approx. 250 hp, 5768 hours, year 1992, 8.3 Cummins turbo, runs welland is in good condition

764
Power Unit*
Kubota diesel, MN V1505ET16, 105 hours on new clutch, approx.30 hp, came off of Lot # 705 VERY GOOD UNIT

765
Generator*
New! Powerhouse 4500I224CC gas motor, MN 83171, SN 042/0041, 1 phase, 120/240 V, 30.8/15.4 amp, 60HZ, Brand new!

766
Hydraulic Unit*
Georgetown hydraulic unit with Honda GX690 motor, electric start, on running gear with quick connect hose, Like new condition!

767
Hydraulic Tank*
16'' x 16'' x 29'' hydraulic tank with Prince 2000 hydraulic motor, MN SP25A27A9H2-R, in good condition

770
Power Unit
2019 Deutz diesel, MN TD2.9L4, SN 12418725, 49 hp, 2200 RPM, 1 broken fan blade Almost New Condition

771
Power Unit
2019 Deutz diesel, MN TD2.9L4, SN 12418725, 49 hp, 2200 RPM, no fan blades or dipstick Almost New Condition

772
Power Unit
2019 Deutz diesel, MN TD2.9L4, SN 12433331, 49 hp, 2200 RPM, no fan blades or dipstick Almost New Condition

773
Power Unit
49 hp, SN 12369205, has broken water pump, selling as is Almost New Condition

774
Power Unit
MN TD2.9L4, SN 12115241, 72 hp, year 2017, Deutz diesel, almost new, condition unknown

775
Power Unit
MN D2.9L4, SN 12085035, 40 hp, year 2017, Deutz diesel, almost new, condition unknown

776
Power Unit
MN TD2.9L4, SN 11454725, 72 hp, Deutz diesel, almost new, condition unknown

777
Power Unit
MN TD2.9L4, SN 12467328, 49 hp, year 2019, Deutz diesel, almost new, condition unknown

778
Power Unit
GMC 150 HP V6 Diesel with right angle Clutch, on 2 wheel gear. Running condition. Battery not included.

798
Dump Hopper
3' x 5' x 31 Hopper (blue)

799
Grey Metal Hopper*
on wheels, 29'' x 48'' x 30''

799A
Shenniu Diesel Tractor
1997 Model 295T3F1 Runs and drives PTO works, Needs new Brakes and tune up.

800
Kioti Tractor
Kioti SL2410 Tractor with loader, showing 213 hours, SN NY5600263, year 2020, like new condition

801
Land Pride Brush Hog
MN RCR1248, like new condition

802
Rototiller
Kioti HCA475CS, SN PRA100016, rototiller 47'' wide, like new condition

803
International 660D Tractor
6 cylinder diesel engine 
has new battery
5 speed  
Runs good 
Drives but needs Torque Amplifier repaired
Tire tread low
S/N1857S-Y 

804
Farmall Model A
SN FAA1106070, rear belt pulley, PTO, 50% rubber on tires, 6V, restored, runs good

805
Farmall Model M
SN 173787X1

806
Ford Tractor
800, 4 cylinder gas, 70% rubber on tires, meter reads 533 hours, 5 speed, 3 point, good running condition

807
Diesel Kubota
B 7100, 4 wheel drive, 6 speed, 3 cylinder diesel, 541 hr. showing, PTO, 3 point. hitch, 50% rubber and a little dry rot, works good

808
Kubota Tractor
M4700, meter reads 4,345 hours, rear turf tires, 1 like new and 1 at 40%, rear 4 port hydraulic, PTO, good condition

809
Massy Harris
44 special Model 44 GIRF, SN 59952, Runs good, No pulley, PTO, 3 point. hitch, fender needs new oil case seal, 20% rubber, New battery

810
John Deere MC Crawler
1949 MC Crawler Older restoration New final drive 12" steel tracks 12 volt system s/n 10665 belt pulley and PTO work. Runs Good, Totally rebuilt from the Ground up New Steering Clutches and all. Nice Machine

811
John Deere Loader
John Deere 1020W, 48 loader, PTO, hydraulic, partial 3 point, tires are at 50%, 13.6-28 tires, repainted, 60'', has power steering and runs good. 3PTH works.

812
John Deere B Tractor
1941 Model B New Rubber Tires  Hand Start Runs good S/N 110597

813
John Deere 60 Tractor
1952 John Deere 60 New Battery Runs but engine is weak.  Ran when parked 2 years ago. S/N 6003767

814
John Deere LA Tractor
Like new rubber! John Deere Engine Runs Good, No S# tag, Has manual Rebuilt Starter Runs Good

815
John Deere M
1949 has PTO, Belt Pulley, 60% rubber, some dry rot, runs good, 2 point hitch fenders S/N 26479.

816
John Deere M
1949 M repainted, runs good, has PTO, 12V with new alternator, Like new rubber with dry rot S/N 33620

817
John Deere MT
1950 MT 80% rubber, 6V, 2 point hitch, Belt Pulley, PTO, Runs good, fenders S/N 17052

818
John Deere BR
1942 BR Hand start, Like new rubber, Has PTO, straight pipe, Runs good, fenders S/N 332648

819
John Deere AR
unstyled1936 AR , 90% rubber with dry rot on tires, hand start, runs good S/N 251502

820
John Deere D
hand start, 40% rubber on tires, PTO, belt pulley, works good

821
John Deere AN
1947 AN Hand start, runs good, 50% dry rot rubber, single front wheel, PTO, 2 point hitch, NO SN # plate

822
1948 John Deere BNH Tractor
1948 Serial # 229230 JD BNH with Rock box has PTO, Belt Pulley Single front Wheel, 40% Rubber, Left rear tire has very small air leak. 

2000

823
JD 40
1953 John Deere 40 , 2pt hitch, PTO, has 12V Battery but charger is not working, 60% rubber, runs good S/N 62665

824
John Deere 420W
1956 John Deere 420W Nice solid original condition, runs, tires at 60% with dry rot, 3 point hitch, PTO, fenders, 6V New Battery.S/N 88512

825
John Deere GM
1943 John Deere GM hand start, 80% rubber with some dry rot on front tire, has fenders, PTO, runs good, original gauges S/N 13695

826
John Deere D
1949 electric start, steel wheel with rubber, PTO, SN 184371, lights work, alternator is not working, runs OK

827
John Deere 620
 1958 SN 6216786, power steering, PTO does not work, 3 point works, belt pulley, runs good, like new rubber with dry rot, rear exhaust

828
1957 John Deere 620
1957 SN 6206873, as is, condition unknown, original condition

829
John Deere A Tractor
1950 JD Model A s/n 663337 50% dry rot rubber, Elec. Start, Runs & Drives needs tune up.

830
1949 John Deere A
1949 SN 614900, original condition, condition unknown AS IS

831
1/2 Scale John Deere Model D
on steel wheels, 56 wide x 87 long x 48 high, MN 141-589022, Kohler motor, Runs and operates good. 1 of 3 that are made. 4 speed

832
JD 4240
4240 JP-X about 1/3 scale Tractor, 1065 hr showing, Has Kohler Model M12426 Engine 50%, rubber 38" wide x 70" long x 42" High, Runs Good

833
John Deere 320-S Tractor
1957 SN 320465, MN 320-S, 2 cylinder, gas, like new rubber, 3 point hitch,draw bar, restored condition, runs well

834
John Deere B Tractor
1 new rear wheel, others about at 50%, complete, no SN # plate, not running, rebored block piston

835
John Deere 4 Cylinder Continennel Gas Motor
electric or hand start with clutch, runs

836
Ford LGT 148
Hydrostatic with 60'' deck, lights and mower work good, 14 HP new meter showing 26 hours, rubber on tires is 60%

837
Ford LGT 120
4 speed, 12 HP, runs but smokes little, rubber on tires is 40%

838
Bolens Garden Tractor
MN 750, with mower, snowblower, snow plow, and rototiller. Runs and works well and is in good condition.

839
2002 John Deere 6403 Tractor
Approximately 8400 HRS, 2x4, 85 hp, 50% rubber, Diesel Engine, 3 point hitch and PTO, Dual auxiliary hydraulic hookup, 3 speed w/ high,medium, and low gear, Roll bar, 4 way lights w/ trailer hookup.

840
Lumber Carts
4 carts, 36 x 60 x14'' Ready to be made into a train behind your tractor.

841
John Deere Tractor*
John Deere 1950 A, 2 cylinder, gas, tractor restored, electric start, PTO works, on full steel wheel, SN 660555, good running condition

842
Tractor
MN 4020, SN 14141955, 20 hp, 444 hours, Ingersoll hydraulic drive tractor, Onan gas 8:00-16, 6 bolt tires, 80% dry rot rubber with chains

843
Tractor
MN 4016, SN 14128867, 16 hp, 1725 hours, Ingersoll hydraulic drive, Onan gas 8:00-16, 6 bolt tires, 40% dry rot rubber with back blade and scraper blade, 1 port hydraulic

844
Log Splitter
24'' hydraulic drive log splitter on 14'' wheels

845
Snowblower & Snow Plow
48'' snowblower at 52'' x 20 snow plow, will fit Lot # 842 or 843

846
Ford Tractor
Ford  diesel tractor, as is, not running, rough condition

847
New Holland Tractor
MN TC33D, 40 HP SN G037465, 2637 hours, with 7308 loader with 60'' bucket, 70% rubber, canopy, 3 point hitch, PTO, 4 x 4, missing key, runs well and is in good condition

848
Ford Tractor
MN 2000, 236 hours, gas, 4 cylinder, 80% rear rubber, 1-front 70%, left front bald, power steering, 3 point hitch, PTO, drawbar, brakes need adjusted, runs well and is in good condition

849
Silver King Tractor
Silver King 4 cylinder gas tractor, motor # F7162312, SN 6211, not running and no battery, condition unknown

849A
Ferguson Tractor
Runs and Drives was driven to the Auction Site. It does need a new Starter. The starter on it is not working right.

850
New Holland Hay Elevator
16' Skeleton Hay elevator Model 132 s/n 539712 working condition.

850A
Implement Seats
Pallet of 10 Implement seats. Rusty

851
2 Bottom Case Plow
Case breakaway 2 bottom plow 3PTH.

851A
Plow
Single bottom plow for John Deere L or LA

852
Cultivator
spring tooth and cultivator for John Deere L or LA

853
Square Green Grist Mill
Belt powered Grist Mill.

854
Nordyke @ Marmon Co 20'' Grist Mill
Belt powered Grist mill.

855
Ohio # 13 Rare Cutting Box
with 8'' x 17 1/2'' wooden web, in good working condition, very nice piece, hard to find, 11' long x 43 x 45 Belt powered.

856
Buckeye Tractor Single Chisel Plow Attachment
New! MN 3090, SN 5372909, 3 point hitch

857
5' Wood Cadet Co Brush Hog
80'' long, 1 rust hole on top, working condition

858
3 Point Hitch Plow
2 bottom, good condition

859
Snow Blower
3 point hitch snow blower, good condition

860
Brush Hog
MN 5-4, SN 0053602, 60'' woods Dixie cutter, 3 point hitch, good condition

861
Finish Mower
MN MORO7200-2, SN 986057, woods RD7200 finish mower, 72'', 3 point hitch, good condition

862
Flail Mower
MN 917H, SN K420879, Ford 92'' flail mower, 3 point hitch, good condition

863
Rototiller
60" Rotomec Rototiller

864
Plow
14'' John Deere 2 bottom plow, 3 point hitch, good condition

865
Double Disc
John Deere 64'' double disc, 3 point hitch, good condition

866
Gravity Box
MN 181, SN 2093, New Holland, 6' x10' x 4', good condition

867
Wheel Weights and Chain Falls
2 Wheel weights off of Inter. 6 series 24" outside dia., 2 wheel weight off of Cockshut 21.5" Dia. and Yale Chain Falls.

900
2012 Dodge Grand Caravan Van
Mileage: 135,289
Body Type: 4 Door Van; Extended
Trim Level: SE
Drive Line: FWD
Engine Type: V6, 3.6L; FFV; DOHC
Fuel Type: Gasoline/E85
VIN #: 2C4RDGBG1CR349550

Features and Notes:

901
Ford 2015 Transit 350 IT. Van
189,700 miles, V6 motor, vinyl seat, power window, 15 passenger, 70% rubber on tires, very clean, front and rear air tow package, no rust, Florida van

902
1999 GMC Suburban 1500
8 passenger, 209,152 miles, 50% rubber on tires, runs and drives but selling as is, has some rust, 4 wheel drive works, tow package 5.7 ,Has a crack in the frame (left rear)

961

903
2002 Sterling L7500 Series Truck
Mileage:59,081
Drive Line: 6x4
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
VIN #: 2FZHATAK12AJ53210

Features and Notes: Automatic 3126 Cat and Cummins B 3.9-130 on vac pump, 4,351 hours, 5,285 engine hours

904A
1994 Ford Flatbed
Ford 9000, VIN R900VEA7233, 400 big CAM Cummins diesel, 75% rubber on tires, CDL air brakes, 17' 6'' x 90'' x 14 bed tail gate, set of 4 like new dry rot wheels, 401,8544 miles, 3553 hours, 5 speed manual, has some rust, runs good

905
1997 International 4900
6 Speed Auto DT530 Allison Trans Dump truck with Stainless steel salt spreader 28,200 org miles. Runs and drives.

906
2002 Ford 350 Powerstroke
MN F350, SN 1FTSX31F62ED557, 700 hp, year 2002, 7.3 diesel, extension cab, dually Powerstroke Turbo Built Transfer towing, air suspension on back, 70% rubber, fifth wheel, gooseneck, bumper hitch, cloth interior, no rust, 206,581 miles, is in good running condition!

907
Truck Tarp
8' x 48 truck tarp and sides, complete with no holes

908
Chevy C3500
1999 Chevy C3500 310,000 miles runs and drives. 5.7 V8 Auto according to mechanic well maintained, 8' bed has some rust towpackage and brake controller 80% left on rubber. Cracked windshield. VIN 1GCGC34R8X706400  Color White.

909
2012 Nissan Rogue
2012 Nissan/ Rogue 4 wheel drive 137,457 miles. Runs and drives, trans. has a slight hesitation, Cloth interior. VIN JN8S5MV5CW710115, Color K51 Trim K 80% rubber 4 cyl. automatic Power windows, has crack in windshield. 

950
Equipment Trailer
MN FIT 3-35 BT VIN 13N 84022-S-N1553844 YEAR 1992 FONTAINE 8' x 27' 9', 2' dovetail no ramps, Dual Tandem 7 tires 80% 1 50% 11' long tongue 6"x18 1/2" x 3/4" thick main frame, Cross members have some rust, tows great all lights work. Trailer will need some work.

951
Tilt Trailer
2018 22' MAXXD 16' tilt trailer, 6' flat, 83" wide between the fenders Needs New Axles, Brakes & Tires everything else is in excellent condition.

952
Jayco Eagle Camper
SN 1UJCJ02P351LF0286, 5th wheel camper, year 2005, Jayco 30' wide x 3' x 13' slide out, 6' x 20' awning, new battery, electric jacks,  roof AC, self contain water, sleeps 6, 90% rubber, loaded with fridge, freezer, microwave, stove, shower, toilet and sink. Very clean and in very good condition!

953
Gooseneck Trailer
2003 Mortiz Gooseneck 15'19" flat 5' dovetail, No Ramps, has rust, double axle, Lights & brakes need some work, 70% rubber

954
Trailer
Mid Atlantic 80" x 16' w/ 3 ramps, 2-7000 lb. axles, New jack, May need new tires, Rusty fenders, No title

955
Trailer
NOPCO Pintle Hitch dbl. axle Like new wheels 83"x16' deck 2 Ramps, 16x55 Brake Controls, No title, Was used w/ Lot #553

956
Trailer
81" x 11'4" with a 30" dovetail plus ramps

957
2014
5' x 10', 16'' sides, new spare tire, tartar, VIN 51GBUXEL012907, with ramp gate, excellent condition

958
Gooseneck Trailer
2018 Iron Bull  Gooseneck Trailer 22' flat 6' dovetail.

959
Trailer*
5' x 10' x 34'', homemade trailer with canvas rooftop, 4.80-12 spare tire, wood floor, 38 x 62 ramp gate

960
Trailer
77"x16' Home made trailer, fair condition, 45" tongue 12 volt 4500 lbs  winch, Brake away 1 tire no good rest 40% fenders some rust.

961
PJ Tilt Trailer
20' PJ Tilt Trailer

962
Landscaping Trailer
12' Landscaping Trailer

988
48" Quick Attach Forks
48" Quick Attach Forks

989
60" Quick Attach Bucket
Used 60" Quick Attach Bucket

990
ES HD Dump Hopper
3 YD Hopper Constructed in the U.S.A. with quality American steel, 1/4” steel base, 7 gauge steel sides,
3” Fork Opening, Strong, easy-to-operate latch, Safety Chain included to wrap around the mast of the forklift to prevent the hopper from coming off the forks, Fully welded seams, Overall Approx. Dimensions:  70.5″ Long x 57.75″ Wide x 55″ Tall, 3 cubic yard volume, 6,000 lb. capacity, Weight:  960 lbs. , Painted gray

991
ES Dump Hopper
2 1/2 YD Hopper  Constructed in the U.S.A. with quality American steel, 3/16” steel base, 10 gauge steel sides, 3” Fork Opening, Strong, easy-to-operate latch, Safety Chain included to wrap around the mast of the forklift to prevent the Hopper from coming off the forks, Fully welded seams, Overall Approx. Dimensions:  64″ Long x 69-3/4″ Wide x 46″ Tall, 2-1/2 cubic yard volume, 4,000 lb capacity, Weight:  700 lbs, Painted gray

992
Dump Hopper
2 YD Hopper 
  • 4,000lb. capacity
  • 619lb.
  • 3″ fork opening
  • 7 gauge sides
  • 7 gauge steel base
  • 68″ L x 57.75″ W x 46″ H
  • 28.5″ x 3″ fork pocket
  • Lip to ground 33″

993
Bale spear
Round bale spear. Weight145 lbs
Spear & Stabilizers49″ spear & 18″ stabilizers
Capacity3,000 lbs
Frame46″ x 6″ x 19″

994
Bale Spear
Square bale spear Weight185 lbs
Dimensions57 × 19 × 6 in Spears 3 – 49" Spears
Capacity 3,000 lbs
Frame 46" x 6" x 19" 3 square 1/4" wall frame

995
ES 72" Brush Cutter
BRAND NEW Open front face design
2” drive shaft
3 hardened steel blades- 5″ x 1/2″
Grease filled drive, with greaseable zerk fittings
160 cc motor for machines 15-26 GPM
Steel runners on each side for ease of use over multiple terrains
Comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers
Weight: 1350 lbs.

996
Snow Pusher
Brand New 6' XP, 30+HP 77x34x31, 4cu.yd 620lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

997
Snow Pusher
Brand New 7' XP30 35 +HP 89x34x31 5 cu. yd 655 lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

998A
Snow Pusher
Brand New 8' XP30 Pullback, 40+ HP, 101"x34"x31" 6 cu yard 820 lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

999
Snow Pusher
Brand New 10' XP30 60 + hp, 125" x 34" x 31" 8cu yd 775lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

1000
Reliable Driveway Grader
Brand New Quick attach for skid steer 86" W 72" L  22" H

1001
Reliable Driveway Grader
Pull behind 48" x 46" x 6"

1002
Forks
4'' x 48'', stout USA made, used condition

1003
Brush Grapple
66'' Brush Grapple Tomahawk brand, 1 hydraulic cylinder, used condition

1004
Koyker Post Pounder
SN K682758133216, year 2011, in good working condition

1005
Sawdust Bucket
8' wide, 45'' deep, 35 high sawdust bucket with fork pockets

1006
Brush Grapple
72" used Cat double cylinder Brush Grapple

1007
Land Pride Rake
MN LR1596, 3 point rake, 8' wide, in good condition

1008
John Deere 65
7' 3 point blade, 17'' high with caster wheel

1009
Platform
48 x 44 x 4'', 3 point

1010
Slip Scoop
30 x 32 x 12, 3 point

1011
Ford Sickle Bar Mower
3 point, 6' sickle bar mower, SN 36769

1012
Boomlift
3 point, 7' long

1013
Set of 2 Steel Tracks
9'' wide x 11' 6'' used.

1014
Hydraulic Bucket with Fork Pockets*
48'' x 30'' x 26''

1015
HD Ripper*
74'' , 36'', 3/4" Dia. teeth with quick attach plate used

1016
2 Tires*
2-9 lug, 13.50-16.1 tires, 40% tread

1017
John Deere Blade*
7' x 16'', 3 point blade

1018
ES Skid Steer Bucket
New! 96'' snow/mulch bucket Steel Cutting Edge1/2″ x 6″
Bucket Specs11 gauge bucket with 3/8″ reinforcement on sides and 1/2″ reinforcement on bottom
38″ deep
27″ tall, 1.28 cubic yards

1019
ES Skid Steer Bucket
New! 78'' snow/mulch bucket, Steel Cutting Edge1/2″ x 6″
Bucket Specs11 gauge bucket with 3/8″ reinforcement on sides and 1/2″ reinforcement on bottom
38″ deep
27″ tall, 1 cubic yards

1020
ES Skid Steer Bucket
New! 72'' bucket with bolt on edge, Weight715 lbs
Dimensions34.75 x 72 x 20-5/16
Steel Cutting Edge1″ x 8″ welded on cutting edge
5/8″ bolt on cutting edge
Bucket Specs1/4″ thick sides, 1/2″ thick bottom. 1/4″ thick back with 1/4″ thick reinforcement plate at quick attach
Capacity.63 cubic yards

1021
ES Skid Steer Bucket
New! 60'' snow/mulch bucket, Weight360 lbs
Dimensions60 × 38 × 27 in
Steel Cutting Edge3/4″ x 6″
Bucket Specs3/16″ sides and bottom with wear bars for reinforcement. 1/2″ wear bars
Capacity.8 cubic yards

1022
ES Skid Steer Grapple
New! 72'' rock grapple 3/8″ teeth and sides, 72″ x 34″ x 19″, 3″ square tube frame,1 cylinder grapple with 3000 PSI hoses, 1/2″ flat faced quick connect couplers

1023
Skid Steer Grapple
New! solid bottom, 66'' rock grapple, Comes with hoses, fittings and couplers, Dual Hydraulic Cylinders with covers, Includes 1/2″ flat faced quick connect couplers that fits almost any skid steer hydraulic system, 2″ x 8″ AG cylinders, Independent grapple tines – makes uneven loads easier to grapple, Universal Quick Attach mount, 8.5″-9″ spacing between tines, Recommended for compact tractors and machines with 40 hp or les

Our grapples are powder coated black for long lasting performance.


1024
Skid Steer Grapple
New! 72'' double grapple, 1/2″ steel tines, Independent grapple tines – makes uneven loads easier to grapple, Dual Hydraulic Cylinders with covers, Includes 1/2″ flat faced quick connect couplers that fits almost any skid steer hydraulic system, Universal Quick Attach mount, 2″ x 8″ AG cylinders, Comes with hoses, fittings, and couplers., 8.5″-9″ spacing between tines Weight505 lbs.
Dimensions72 × 36 × 28 in
Steel Serrated Tines1/2″
Open Height32″ Front and 37″ Center
Closed Height17″

1025
John Deere Hook Up Bucket
60'', 400/500, Weight345 lbs
Dimensions60 × 30 × 27 in
Steel Cutting Edge, 3/4" x 6"
, Bucket Specs, 3⁄16” thick sides 3⁄16” thick bottom with wear bars for reinforcement
, Capacity .4 cubic yards

1026
Skid Steer Forks
New! 42'' Dingo fork attachment

1027
Skid Steer Forks
New Dingo 48" forks

1028
ES Skid Steer Forks
New  HD 48" skid steer Forks 6,600 lb. lift capacity 

1029
ES Skid Steer Forks
New ES Walk Thru 48" Forks 4,000 lb lift capacity

1030
ES Skid Steer Forks
New ES Standard 48" Forks 4,000 lb lift capacity

1031
Quick Attach Hitch Plate
New Quick Attach Hitch Plate 

1/4″ thick plate

Works with 2″ receiver


1032
80" Grapple
80" grapple Lite duty 1/4" plate 

1036
Snow Plow*
 11' 6'' blade, 38'' high-50'' high, good condition

1037
Sweeper*
80'' sweeper, hydraulic drive on front of truck mount, good condition

1038
Gravel Tray*
36'' x 94'' x 12'' steel gravel tray for back of truck, good condition

1039
Ditch Brush Mower*
MN RB215B, SN 12228,VMC 3 point hitch with controls, 48'' wide, good condition

1039A
Ditch Cleaner
MN BS52Y, SN 750801901, 12'' hydraulic drive

1039B
Tamper*
2.3 hp, Wacker gas powered, weight 117 lbs. 

1039C
Gravel Spreader
8' tailgate gravel spreader, hydraulic drive

1039D
Gravel Spreader
8' tailgate gravel spreader, hydraulic drive

1039E
Fork Extension
fork extension 5 1/2'' x 2 1/4'' x 10', 6600 lb. capacity

1040
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate, Call Bronson 574-210-3721

1041
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'' new in crate, Call Bronson 574-210-3721

1042
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'' new in crate, Call Bronson 574-210-3721

1043
New Skid Steer Rock Grapple Bucket
New 72" Rock Grapple Bucket. Call Bronson 574-210-3721

1044
New Skid Steer Rock Grapple Bucket
New 72" Rock Grapple Bucket. Call Bronson 574-210-3721

1045
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1046
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1047
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1048
New Skid Steer Snow Plow Attachment
86'' wide. Call Bronson 574-210-3721

1049
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate, Call Bronson 574-210-3721

1050
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate, Call Bronson 574-210-3721

1051
New Skid Steer Vibratory Roller Attachment
72" wide, not for high flow hydraulics

1052
New Greatbear Skid Steer Brush Mower
66'' wide cut, quick attach. 

1053
Fork Extension
2 1/4 x 5 3/4 x 7' fork extension

1054
Fork Extension
2 1/4 x 5 3/4 x 7' fork extension

1055
Fork Extension
2 1/4 x 5 3/4 x 66'' fork extension

1056
Fork Extension
2 1/4 x 5 3/4 x 66'' fork extension

1057
Weld on Plate
weld on quick attach plate

1058
Weld on Plate
weld on quick attach plate

1059
Weld on Plate
weld on quick attach plate

1060
Weld on Plate
weld on quick attach plate

1061
Weld on Plate
weld on quick attach plate

1062
Weld on Plate
weld on quick attach plate

1063
Weld on Plate
weld on quick attach plate

1064
Weld on Plate
weld on quick attach plate

1065
Grapple
66''

1066
Grapple
74''

1067
Grapple
79''

1068
Grapple
84''

1069
Hitch Plate
quick attach hitch plate

1070
Hitch Plate
quick attach hitch plate

1071
Hitch Plate
quick attach plate

1072
Hitch Plate
quick attach plate

10000
Photo Gallery






















































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Sponsored Links

Lake Erie Equipment Consignment Auction

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
16989 Kinsman Rd
Middlefield, OH 44062
Sale Dates and Times
Friday Oct 28, 2022 Completed
Sale Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 60 days. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Consignments Wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or John Causey 440.904.0250 (jc2559@gmail.com) fax 440.693.4316.

00
Information Lot
Consignments Wanted! Including but not limited to: sawmill, pallet shop, industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or 440.321.5965 fax 440.693.4316

539Y
Heavy Equipment Key Set 39 Keys
Shipping available for $20

80

539Z
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

81

101
24 Cubes of Assorted Hex Bolts
Grade 5 hex bolts, 1/4'' up to 1'' diameter, socket head bolts

540
New Husquarna
372 XP, SN 2021-1800685, with a 20'' bar

100
6 Cubes of Assorted Hex Bolts
Grade 8 hex bolts, 1/4'' up to 3/4'' diameter

541
Stihl 661
24'' bar, in good condition but has a small oil leak

102
12 Cubes of Assorted Carriage Bolts
1/4''-1/2''

542
Stihl 311
used with a 20'' bar, in good running condition

334

103
12 Cubes of Assorted Nuts, Lock Nuts, and Washers

543
Husquarna 41
used, 18'' bar, SN 95341H0139

335

104
8 Cubes of Assorted Metric 8.8 Hex, Socket Bolts, and Misc. Nuts

550
2012 Cat 259B3 Skid Steer
PIN CAT0259BLYYZ03104, meter reads 3350 hours, two speed, joystick controls, aux hydraulics, has suspended undercarriage, good working condition

336

105
8 Cubes of Assorted Lags
1/4''-1/2''

551
Kubota SVL75-2 Skid steer
Kubota 2015 SVL 75-Z speed track skid steer w/ 3297 hr., tracks are 50% and has standard flow hydraulics, comes with 72" bucket, enclosed cab w/ heat and air, no def fluid

337

106
24 Cubes of Assorted Wedge Anchors, Tapcons, EZ, Lead Anchors, Cable Clamps, and Misc.

552
2018 Bobcat T 590 Skid steer
Bobcat T590 Skid steer w/ 3135 hr., has 78" Bobcat Bucket, heat, air, enclosed cab, standard flow hydraulics, Like new tracks, new step, new quick attach, cylinder, new lights, no def fluid, foot pedal controls.

338

107
24 Cubes of Assorted Wood/Sheet Metal, and Self Drilling Screws

553
John Deere 260 Skid steer
JD 260, 3885.9 hr. showing, SN T002608914003, Stock # 71576 w/ Like new wheels w/ 66" bucket, Nice clean working unit. Fully enclosed cab with heat.

479
Insulation
14 pallets, approx. 225 pieces, 4' x 4' insulation from 1 1/2''-4 1/2''

108
16 Cubes of Assorted Phillips Flat and Pan Head Bolts, and Wing Nuts

480
Insulation
12 pallets, approx. 204 pieces, 4' x 4' insulation from 1 1/2''-4 1/2''

554
2007 Bobcat T300 Skid Steer
Meter reads 6981 HRS. Lot of Rebuilt Parts, SN-532015485, 78" bucket, 18" rubber tracks w/ approximately 50% tread, Hands free quick attach, Auxiliary hydraulic hookup, Enclosed cab - no door, Has heat, AC, radio, and hand and foot controls, Keyless start

109
12 Cubes of Assorted Pins, Bearings, Rivets, Plugs, Wedges, Fasteners, and Screws

555
Kubota SVL 90-2 Skid Steer*
MN SVL90-2, SN 1012654, 7924 hours, has air and heat, has broken glass in door, both windows missing 1 piece of glass, 1 new track and 1 like new, 3010 lb. capacity, runs well but has some wear

485

110
24 Cubes of Assorted All Stainless Steel Bolts, Screws, Nuts, Washers, and Brass Screws

556
Cat 257 Skid Steer
ASV tracks with Cat motor, 3901 hours, SN CAT00257LCMM00730, with hitch, 15'' tracks, fully enclosed cab, air and heat not working, nice clean unit

490

111
9 Cubes of Assorted Grade 5 Hex Bolts
fine thread, 1/4''-5/8'' diameter

494
Pressure Washer
333 hours, Landa Steam Pressure washer, MN PHW53-11021D, 120 V, 1 phase, 1000 PSI, came out of storage, condition unknown

559
Loegering VTS Tracks
Were used on LS 190 NH Will fit most other models. Rubber has less than 75 hrs. 18" wide x 88" x 32", 8 Lug 493/4" center to center of axle, 5 bottom rolls.

112
16 Cubes of Assorted Spacers, Wood Screws, Screen/Storm Door Hardware, and Brass Barb Fitting

495
Brush Cutter*
24'' Bachtold Brush Cutter, Honda G x 270, needs new tire, condition unknown

559A
Skid loader wheel Spacers
Set of 4 Wheel Spacers. 8 Lug.Came off of Case Skid Loader.

113
54 Drawer Cabinet
Loaded with Brass flare, compression fitting, and brass barb fittings

495A

559B
Skid Loader Tires
10-16.5 NHS tires 40% tread left. Solideal Gripper

114
18 Drawer Cabinet
Loaded with drill bits, taps, dies, shaft cover, over 300 pieces!

496
Sprayer
Finco pull behind sprayer 42'' with 12 V pump, looks good

560
Sky Trak
MN 8042, SN 0160028213, 84 hp, 3740 hours, year 2007, new foam filled tires 1 year ago, Right front tire has small air pocket, Cummins Diesel, quick attach 4'' x 60'' forks, runs well and is in very good condition.

580
Yale Forklift
SN 313475, 5000 lb. capacity, forklift #GLPOSORBJUATO86, weighs 9000 lbs., 4'' x 42'' forks, meter reads 9261 hours, 28 x 12.5-15 solid pneumatic front tires with a gas engine, Runs and drives but engine needs tune up. 

115
Cabinet Full of Drill Bits
full of wood, metal, and masonry drill bits, 1/16''-1/2'', 0-80-3/4, over 300 pieces!

497
Craftsman Pressure Washer
4.5 hp, 1800 PSI, gas pressure washer and Craftsman, 4.4 edger trimmer, condition unknown

116
Round Carousel Full of Brass Valves and Copper Fittings
Full of brass valves of all kinds, assorted copper and brass fittings

581
2003 Manitou Forklift
Model TMT320FLHT/W, SN 181149, meter reads 438 hours on new gauge, 5000 lb. capacity, like new tires, has truck mount, Lister Petter Diesel with truck mount, 4-2'' x 48'' forks, 31-15-5-15 tires, 70% rubber on tires, works and runs good

498
Dump Trailer
MN PCT-17JD, 16'' wheels, 39 x 58 x 32

117
Cabinet with Assorted Wire
cabinet has 37 rolls of assorted wire

583
Cat Forklift
Model NOR30P, serial # 2LL-00825, electric order picker, 24 V with charger, 3000 lb. capacity, new battery 2 months ago, comes with 3 phase charger

118
Shelf Full of Electric Outlets, Splitter, 3 Way Switches, and Misc.

585
Hyster Forklift Mast
3 stage, model 190.0/4830-322584, no forks, 16" wide mast

119
Cabinet Full of Assorted Brass Valves, Coupling, and Misc. Plumbing

586
Block Hog Walk Behind Forklift
1400 lb. lift capacity, 77" lowered mast height, runs and operates 

120
Cabinet Full of Brass Compression Fittings, Lots of Brass Fittings and Misc.

587
Clark Forklift
Model CMP30L, serial # 0M230L0480-9586KF, 4" x 48" forks, meter reads 6159 hours, LP gas, solid tires, sideshift, runs good

121
Cabinet Full of Steel Pipe Fittings and Nipples

598
Forklift Forks
6"x43"       20" Mast Plate

122
Cabinet Full of Mostly Galvanized Pipe Fittings

599
Forklift Forks
5"x42"    16" Mast Plate

600
Ford Backhoe
Ford 6500 Backhoe with 24'' and 45'' Hoe bucket, 18.4-28 tires, tires 40%, 85'' wide front bucket, 2 extra down rigger pads, older but runs good, small minor oil leak, New battery, CALP350BSA8187, weight 17,000 lb.

123
Cabinet Full of Mostly Galvanized Pipe Fittings

124
Pallet of Assorted Eyebolts, Lags, Cable Clamps, and All New Hardware

601
John Deere 310 Backhoe
Runs but needs some TLC, S/N 135573T Type 301B

125
Cabinet Full of 1 1/2''-2'' Copper Fittings and 1 1/2''-2'' PVC

602
Asphalt Roller
41" Vibrating Roller, towable with Deutz Diesel, 2 cyl, meter reads 924 hours, Working condition

126
Cabinet Full of Chrome and Brass Plumbing Parts and Misc.

603
Asphalt Roller
Gallion rubber tire roller, 6 cylinder gas motor, runs good, was driven  to the auction site approximately 1 mile, 2496 hours, SN 9RC-12G5071

127
Cabinet Full of Mostly Galvanized Pipe Fittings

610
Crawler Loader
John Deere 455 E Crawler loader, To 455EX717489, meter reads 423 hours, 6'x42' forks John Deere winch

128
Cabinet Full of Copper and Brass Fittings
1/2''-1''

611
John Deere 450D Dozer
John Deere 450D Crawler dozer to 450DC709103, 6981 hours showing, 7' 6'' x 30'' dozer blade w/ John Deere winch

129
Cabinet Full of Galvanized and Regular Pipe Nipples

612
Yanmar Forwarder
C50R, 4413 hr. showing, Like new, 20" Rubber Tracks, 136" long, No Picker, 4 cylinder diesel, 9' x 8" x 7' long deck, needs final drive work. Was running 2 years ago when parked currently not running.

130
Cabinet Full of Galvanized and Regular Pipe Nipples

619
2005 Case 850K XLT Series 2 Crawler Dozer
PIN-CAL004925, 20" tracks w/ 75% tread remaining, 8'6" 6-way blade, 4 cylinder diesel engine, Meter reads 4347 hours, Fully enclosed cab w/ Heat/AC, radio, and joystick controls.

131
36 Drawers of Brass Pipe Fittings and Misc. Plumbing Parts

620
2002 Bobcat 322D Mini Excavator
PIN-223514770, 9" rubber tracks w/ 75% tread, Meter reads 1268 hours, 16'' bucket, Open Cab.

132
72 Drawers Assorted Copper Fittings, Brass Flare, Compression Fitting, and Misc. Plumbing

621
2012 Bobcat E50 Mini Excavator
6300 hours on rebuilt engine, SN-AG3N12349, 4 cylinder Kubota diesel engine, Machine weight - 10,842 lb, Enclosed cab w/ Heat/AC and radio, 16" rubber tracks w/ approximately 70% tread, 78" blade, 24" bucket, 15" hydraulic thumb, Quick attach, Auxiliary hydraulic hookup.

133
3 Cabinets of Drill Bits
1 cabinet of A-Z, 1 cabinet # 60-1, 1 cabinet # 1/16-1/2 (over 500 pieces)

622
20" Bucket
20" Bucket fits Komatsu

134
Pallet of Assorted Screws of all Kinds

622A
36" Bucket
36" Bucket fits Bobcat E50 and more

135
Pallet of Assorted Wood Screws and Washers

622B
16" Bucket
16" Bucket fits Bobcat E50 and more

136
Pallet of Assorted Grade 2 Hex Bolts

622C
12" Bucket
12" Bucket fits Bobcat E50 and more

137
Pallet of Assorted Lags

622F
24" Bucket
24" Bucket Wain Roy coupling Jaw Bucket for excavator Model 003-024

138
Pallet of Assorted Grade 2 Hex Bolts
Assorted sizes

622G
12" Bucket
C-P Enterprises Takeuchi

139
Pallet of Assorted Nuts and Washers

622H
Excavator Bucket
60" wide, 32" deep, 29" high

142
Pallet of Assorted Grade 2 Hex Bolts

623
Blower
Black 13 x 34 Blower, Line Shaft ready, 15" Inlet & Outlet

140
Pallet of Slotted Flat and Round Head Bolts

624
Blower
Green 8 x 26 Blower, 10 HP, 3phase, electric drive w/ collection box, 10" inlet, 8" outlet

143
Pallet of Assorted Carriage Bolts

625
Log Turner
Mellott Log Turner, Hydraulic Drive

141
Pallet of Assorted Lags

626
John Deere Winch
John Deere winch, SN 10WM112511775 w/ cable Worked when taken off of skidder

144
Pallet of Assorted Grade 2 Hex Bolts

627
John Deere Winch
MD10WM112006750, No Cable Worked when taken of off skidder

145
Pallet of Assorted Carriage Bolts

628
Winch
Gearmatic Model 19 winch off 450 Case s/n 16929

146
Pallet of Assorted Slotted Screws and Bolts

629
Woody Log Carrier
Woody CH-130-HD, SN 1707CH130013, 6 wheel log carrier with grapple, Honda HP Motor, hydraulic operated, works good

630
Winch
Hyster D7H winch, MN 677P2219K, SN HY7G15, condition unknown

147
1 Skid Assorted 1 Lb. and 5 Lb. Screws
Approx. 150 lbs.

631
Eager Beaver 1821 Chipper
5-14-21 Mobark, VIN 458S21611LWO26316, 647 hours, 165 HP., gas, PSI 39253643115, has title

148
1 Skid Assorted 5 Lb. Nails
Approx. 185 lbs.

149
1 Skid Assorted 1 Lb. and 5 Lb. Nails
Approx. 150 lbs.

632
Altec Chipper
Model DC12117, SN 5W054151575200148, Cat 3054C Diesel, rusty but runs and works, new battery, does not have right wheels

150
1 Skid of Assorted 1 Lb. Nails
Approx. 186 lbs.

633
Reckart Blower
42'' blower, 12'' wide, 10'' paddles, 2 3/16" line shaft ready, 18'' inlet, 12'' outlet

151
Pallet of Assorted # 3, 6, 8, 10, 12, and 16 Roofing Nails
1 1/2 nails

634
Blower Pipe
9 pcs., 8'' x 14' blower pipe, 2 elbows

152
Pallet of 12-50 Lb. Boxes of Hand Nails
4d, 8d, 10d, 16d, 20d

634A
Blower Pipe
Bill Assorted Blower Pipe fittings

153
Pallet of 8-50 Lb. Boxes
8, 10, 12, 16, drywall nails and screws

635
Mellott log Turner
Hydraulic chain, 36'' chain, excellent condition

155

636
Green Log Turner
40'' chain, hydraulic drive

157
Maytag Wringer
wringer only, Excellent condition and completely rebuilt

637
Meadows Log Turner
# RT 124-92, hydraulic drive, 30'' chain

156
Battery Wheelchair
Quickie Battery Wheelchair, SN M715C-113612 with charger, 2016, Like new condition!

638
Vertical Edger
2-20'' blades, electric over hydraulic, 6 groove pulley

160
Belt Lacer
# 3 6'' chipper, belt lacer, good condition

639
Cornell Blower
9'' x 26'' blower, 10'' inlet, 8'' outlet, 7'' wide paddle, line shaft ready

640
2022 Wood-Mizer LT-40 Portable Sawmill
VIN 456C62414NNHK4969, BRAND NEW MACHINE, came directly from the factory, fully hydraulic, debarker, gas engine, loading arms, log turner

158
Square Maytag Wringer Washer
with electric motor, excellent condition

641
1994 Woodmizer LT 40
1994 LT 40 HDG24 with 12'' extension, 26'' throat, VIN 456A52410RIHE8261, cuts up to 32'', fully hydraulic, no mud saw, 652 hours showing, Onan 24 HP gas motor, 12 extra blades

159
Round Maytag Wringer Washer
with electric motor, no lid, good condition

161
Husky Sprayer
25 gallon, 12V sprayer, no battery, works good

641A
WoodMizer Bands
4 Boxes at 15 Blades each  0.045x1.25x158.10

162
Banding Cart
New in the box!, U Line Model H39

642
Woodmizer Band wheels
LT 40 woodmizer 19'' premier band wheels

168
Electric Grinder
Milwaukee 5'' grinder, with tool bag, like new condition!

643
F8 Simonds*
60'', 56 tooth, 6-7 gauge, good condition

169
Skid of Tee Hinges
6 boxes, 5'' zinc tee hinge nylon bushing, 100 pcs. per box

644
60'' F8 Simonds*
54 tooth, 6-8gauge, good condition

170
Skid of Tee Hinges
6 boxes, 4'' zinc tee hinge with nylon bushing, 100 pcs. per box

645
Frick Mandrel
Frick top Arbor, 1 1/2'' shaft

171
Skid of Tee Hinges
6 boxes, 4'' black tee hinge, 100 pcs. per box

646
Cat Claw Band Sharpener
12 V, working condition

172
Skid of Tee Hinges
6 boxes, 5'' zinc tee hinge, 100 pcs, per box

647
Woodmizer Auto Sharp Control
with 12 V motor, working condition

651
Frick Edger
SN 2867, 27'' wide, 1 adjustable blade, 90'' infeed, 94'' outfeed, 17' 8'' overall,  2-14'' blade with 6'' blower, set up for boards

173
Skid of Screws
6 boxes, 10 x 2 1/2 zinc square drive screws, 2000 pcs. per box

174
Skid of Screws
6 boxes, 10 x 2 black oxide square drive screws, 2500 pcs. per box

652
Frick Gang Edger
SN 5824, size 27, 2-14'' blades, 1 movable blade, 9' in feed, 7' out feed

175
Skid of Screws
6 boxes, 10 x 1 Hex washer screws, galvanized for metal roofing, 3000 pcs. per box

653
Cornell Edger
SN SE249170, 2-18'' blades, 1 movable blade, 36'' wide, 8' in feed conveyor, line shaft ready, needs new feed rolls, in working condition

176
Skid of Screws
6 boxes, 10 x 2 zinc square drive screws, 2500 pcs. per box

654
Miner Edger
SN FB9212, 4'' x 24'', 3 blades, 14'', 2 removable, 6' in feed, 9' out feed

177
Skid of Screws
6 boxes, 10 x 2 1/4 black oxide square drive screws, 2000 pcs. per box

655
Meadows Edger
SN 36D-1832-05, 36'', 3-16'' blade edger, 2 movable blades, 8' in feed, 2' out feed, line shaft ready

178
Chain Links
Pallet of assorted new chain links, Repair from big to small!

656
Lumber Cart
42 x 75 lumber cart, 3 x 8 wheels, 1 1/2 x 4'' metal frame

179
Springs
Pallet of new assorted springs

657
Lumber Cart
42 x 75 lumber cart, 3 x 8 wheels

180
Vac/Air Gauges
All new!, Over 140pcs., up to 2000 PSI

658
Pulley
25" 2 3/8" shaft 3 groove number 3B250R

181
Vac/Air Gauges
All new!, Over 70 pcs., up to 2000 PSI

659
Hemco Trim Saw
Double M trim saw complete (8 blades) with 14'' x 18' waste conveyor, good electronics, extra set of blades and spare parts, 1 saw motor, drive gear box needs rebuilt, taken out of service 7-5-22, 84'' wide x 24' x 100', feeder 76'' wide x 18' 6'' x 60'' tall

182
Allen Wrenches
whole skid of new and used, assorted sizes

660
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

183
Generator
Power Partner 6000WAH, 120/240, Kawasaki wheels need attention, unit works good

661
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

184
Torch Set
Harris torch with cart and tanks, condition unknown

662
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

185
Flagler
SN 2307, sheet metal flagler, works

663
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

186
Crescent Wrenches
18'' and 24'' China Crescent wrenches, Like new!

664
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

187
Electric Tools
GMC Biscuit Jointer, buffer, multi tool, all in working condition

665
Miner Edger
SN FB9142, 24" wide 2-14" Blades, 1 movable, 6' infeed 7' outfeed w/ sawdust Box

188
Machinist Tools
6 pc. Outside micro meter Starret caliper and gauges

666
Lumber Cart
42 x 72 x 16" Lumber Cart, New 2 x 10 Phonelic Wheel, 

189
Drill and Router Bits
Steel drill bits, router bits, taps, some new, approx. 200 pcs.

667
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2 x 10 Phonelic Wheel,

190
Cutting Torch Set
Harris cutting torch with gauges and hose

668
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2 x 10 Phonelic Wheel,

191
Cutting Torch Set
2 boxes, new and used cutting torch, tips and misc.

669
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

192
Roll Chain
2 new rolls, 40LLR, 50', 1 new roll # 80 x 200

670
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

193
Armstrong Stand
# 933, 1/8-1 1/4 Rigid pipe threaders with cutter @ Reamer, good working unit

671
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

194
Rigid Stand
# 460, 1/4-1 1/4 Rigid pipe threader with cutter@ Reamer, good working condition

672
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

195
Oster Pipe Threader
Oster 142-5 Electric portable threader with # 65-R, 1'' - 2'' pipe threader, good working condition

673
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

196
Rigid Threader
model 200, 1 phase, up to 2'' pipe on tripod stand, works good

674
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

200
Grob Metal Cutting Bandsaw
Grob 1977 24'' Metal Cutting Bandsaw, MN 4V-24, SN 1203 with blade welder, 3 phase, 240/480, 24 1/2'' band wheel, 198'' band

675
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

201
Marvel Metal Cutting Bandsaw
MN 712M, SN 712M88251, hydraulic up and down, 2 new 8' 11'' blade, works good

676
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

202
Chain Hoist
Brand new! 10 ton CM chain hoist, SN S3385WP

677
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

232

678
Skate Rolls
2-36'' x 10', 2'' rolls, 1 is missing some rolls

249
Iron Worker
Edwards 75 Ton Ironworker, SN 02847594, box of extra punch dies, electric, 5 HP, 3 phase, good working condition!

679
Skate Rolls
36'' x 10' x 2'' 

250
Iron Worker
Edwards 55 Ton Ironworker, SN 21255500, box of extra punch dies, set up for hydraulic, works

680
Skate Conveyor
35'' x 10'', 3 pcs.

300
Kreg Jig
1996 Kreg Jig Model DK, SN 12474, pocket hole boring machine, air powered foot control, 21 x 38 table, works good

681
Skate Conveyor
35'' x 10'', 3 pcs.

301
Powermatic Bandsaw
Model 81 Bandsaw, 19'' throat, SN 91165, 20'' x 1 1/4'' band wheels, 149'' bands, 1 new extra blade, line shaft ready, works good

682
Aluminum Elevator
5'' x 16', with electric motor works

302
Mini Max Shaper
Model T3, SN KF8279, hydraulic drive, 1 1/4'' spindle, 2 grizzly 1/4 HP, power feeder, Like new! Excellent condition!

683
Edger
Edmiston Edger 2 movable 16" Blade 28" 7' infeed - 6' outfeed, Fully hydraulic. Has small hydraulic leak but works good

303
Delta Shaper
MN 43-431X, SN 06C11561, hydraulic drive with extension table, 2 1/4 HP, Grizzly power feeder, Like new! Excellent condition!

684
Laser Rack
Edger Laser Rack FBW50110R 1000L off of lot 683.

306
Air Motor
6 Model 4AM-NRV-130, all in new condition

685
Belt Conveyer
31' x 14" Conveyer belt w/ Robin Ey 28 Gas Motor

310
Panel Saw
Robland 2320 Panel Saw

686
Morbark Chip Blower
 30 HP, 3 phase, 46" Drum 7' x 18' pipe, 14' overall w/ mounting plate

311
Jointer
PF310, year 1988, 220V, SN 8838, 12 x 84'' bed, 2 extra set blades

687
Cant Sizer
12" Cornell cant sizer, SN 101-12-81, 25 Hp, 230/460 V

312
Jointer
12 x 60'' bed, heavy duty

688
Lumber Cart
48 x 106 x 41 Steel cart, 10 x 2 1/2 Wheel & Drum Cart

313
Chop Saw
DW705 DeWalt chop saw, electric

689
Barn Sweep
Pallet of 16" Barn Sweep Repair Links

314
Rockwell Shaper
SN 117-8110, 27 x 36 table

690
Steel Banding
12 rolls, 3/4'' x .025 banding

315
Radial Arm Saw
18'', Rockwell Radial Arm Saw, MN 40-C-1, SN DT2059

691
5/8 x .020 Banding
12 rolls 5/8" x 0.20 banding

316
Powermatic Planer
20'' planer, 4 straight knives, 3 phase, 220/240

692
Lumber Rolls
36" x72" x34" Lumber Rolls

317
Band Saw
Jet 18'', MN JWBS-18QT3, 18'' wheels, SN 1012965, 3 HP, 230V, 1 phase

693
Lumber Rolls
18" x120" x 34 Lumber Roll

318
Table Saw
10'' Delta unisaw with 52'' fence, 34-802, SN 92L97260

694
Trough Conveyer
Trough Conveyer, 17" Belt, 22' overall, 41" high to 56" high , 3 phase, 1 Hp

319
Router
24 x 32 router table with porter cable router

695
Steel Table
47"x 42" x 38 H.

320
Edge Sander
1 1/2 HP, 3 phase, 4'' x 96''

696
4 Strand Live Deck
6' x 12' x 48" 4 Strand Live Deck, 2 Hp, 3 Phase Electric Drive only 3 strand chain

321
Belt Disc Sander
Powermatic 6 x 24 belt, 12'' disc

697
Plastic Roller conveyer
18" x 10'6" x 35" Eds IDAB Plastic Roller conveyer on casters, 3 phase, 1/2 Hp

322
Powermatic Drill Press
MN 1150, SN 8615V170, .75 HP, 1 phase

698
Sawdust Auger
13" x 34' Sawdust Auger, 3 hp, 3 phase, 208/460V

323
Phase Converter
Phase master model D-15, 10V, 230/460 input, 30V 230/460 output, max 10 HP

699
Roller Conveyor*
42'' x 72'' roller conveyor, with set of 34'' legs, 2'' rollers

324
Work Bench
55 x 64 x 34 butcher block top with 3 vices

699A
Keystone 2 Head Resaw with Runaround System
Electric drive on heads, 1 1/4"x38" band wheels, 1 1/4" bands, 6"x80" feed belt, Air clamps, Has full runaround system - fully hydraulic, 5 strand pop up transfer w/ Rolls and belt - 7'x7', 4x6" rolls w/ 10" spacing, 6"x7' belt conveyor, air cylinder for pop up
Belt conveyor - 6"x10', Hydraulic drive
5 strand pop-up Transfer w/ rolls - Laser lights, Hydraulic drive, 4x6" rolls w/ 10" spacing, 7'x7'
 

325
Electric Motor
5 HP, 3 phase, Dayton electric motor, 3455 RPM, 208, 230/460, works

700
Brewco Single Head Resaw
Model BSBH12, serial # SB1E4148, 9 1/2 '' wide belt, single head, 1 1/2" bands, 28" band wheels, hydraulic drive, condition unknown

326
Air Compressor
Speedaire 1 HP 1 phase Air Compressor with air hose reel

701
Belt Conveyor
48'' x 11' wide belt conveyor, no drive, with adjustable legs

327
Fan
30'' Patton fan, Model 1010MP, 120V

702
Log Arch
Year 2022, 6' long, will handle up to 20'' log, 15'' air tire, hand operated, New condition!

328
Grizzly Dust Collector
2 HP, 1 phase, SN 8866640, 16'' drum

703
Log Arch
Year 2022, 9' long, up to 25'' log, 16'' air tire, with winch and hitch, New condition!

329
Tool Box
2 tool chest on cart, 19 x 52 x 36 with tools

704
Log Arch
Year 2022, 9' long up to 25'' log, 20'' wheel, with winch and hitch, 2000 lb. capacity NEW condition.

500

705
Edger*
30'' Meadows Edger, 2-16'' blades, 1 movable, 7' infeed, 7' 6'' outfeed, working condition

705A
Meadows Edger
Meadows Edger 48" wide 3 16" blades 1 movable 6' 6" infeed 8' outfeed Line ready

706
Saw Grinder Wrench*
BDFS saw wrench and hand saw grinder

707
Blower*
Twin City  37'' x 10'' drum,8'' paddles, 15'' inlet, 12'' outlet, size 915, SN 15-5381231-1, Tag # EF-1 Booster fan, line shaft ready, good condition 

708
Lumber Sled*
48 x 92 x 18'' steel lumber sled, good condition

709
Steel Lumber Sled
48 x 92 x 18'' steel lumber sled, good condition

710
Hydraulic Cylinders
2-49" 3-46" 1-54" 1-65" 2-58" Used but look to be in good condition.

711
Line Shaft and Pulleys
2 Line shafts 1 11' 10" frame with 1131/2" 1 1/2" dia. Line shaft w/pulleys
80" Frame with 86" 1 7/8" Dia. Line shaft w/ Pulleys.

712
Drilling Machine
Hyd. Drive 2 Head Drilling Machine Used for coal mining Roof boards. See sample Working cond.

713
Up cut saw
27.5" Extra blade  Line shaft setup air cylinder 58" table w/ 4 stops.

714
Roll Case
12' x 24" 37" h.  w/ 4 1/2" x 16" HD Rolls gear chain Drive w/ air clamp.

715
Unscrambler
3 strand 108" x 77" x 53" Line raedy Good Cond.

716
Blower
6" blower in good Cond. Line ready

717
Welding Table
30x 90x 32 Welding table.

747
Hyd. Pump and tank
Pabco Hyd. tank and pump 26 x 38 x 20 on frame W/ Vickers 2620v0 K880 Pump and hoses w/ valves Line ready, Good Unit

748
Hyd. cooling Unit
12 volt Fan-Radiator for Hyd. unit

749
Perkins Power Unit
80 HP Diesel 3150 original hrs w/clutch 2 1/4" shaft, and radiator MD 1239/1700  S/N LD70263 U8693630 Good working Unit

750
Detroit Diesel
Detroit diesel, 4 cylinder with Rockford clutch, 2 1/4'' shaft, hours unknown, runs good

751
Kohler Generator
MN 10RCT63-64131C, SN 285735, 1 phase, 10KW, 10KVA 120/240, 41.7 amp diesel generator, Waukesha MN 180DLC, SN 122524, 3034 hours, condition unknown

752
Pow R Quip 240 Welder/Generator
New! .33 hours showing with remote start, 14 HP Kohler motor, no leads

753
Perkins Power Unit
3 cylinder, power unit came off of welder, does not run, condition unknown

754
I Suzu Power Unit
Diesel, no clutch, 3 cylinder, condition unknown

755
Perkins Power Unit
#TU33421U849980W, no clutch, 6 cylinder diesel, 8,621 hours showing and 31,378, ran when taken off of sawmill 3 years ago

756
Diesel Power Unit
Lister #725, 45 HP, SN HR3A3DM-07, 1,759 hours since rebuilt with twin disc clutch, 1 3/4'' shaft, 3 groove pulley, with hand crank, in good working condition. Reason for selling is unit is too big.

757
Gas Motor
1999 Ford gas motor, Model VSG413I6005A, 785 hours, SN 11570-1-07-99, with hydraulic pump, approx. 35 HP, runs good, came out of sweeper

758
Generator
9500 Prolite 519 hrs gas Industrial, Works Good Like new condition. 419 cc motor.

759
J/D Power Unit
 John Deere MD 4024TF270 # PE 4024t011511 Has turbo and radiator No starter condition unknown.

760
Lister Gen-Set
Serial # US1774ST3A29, 30 HP, 2600 RPM, 12 KW generator, 120 or 240 volts, 3 cylinder, on steel frame, works good

761
2019 Deutz
MN TD2.9L4, 49 HP, 2200 RPM, code # C4DI336EU, SN 12440182, looks to be in new condition

762
Power unit mount
Power unit mount w/ 2 1/8x16' Lineshaft 15'x5' Frame 6"x6" Frame

763
Cummins Power Unit
MN 3920701, approx. 250 hp, 5768 hours, year 1992, 8.3 Cummins turbo, runs welland is in good condition

764
Power Unit*
Kubota diesel, MN V1505ET16, 105 hours on new clutch, approx.30 hp, came off of Lot # 705 VERY GOOD UNIT

765
Generator*
New! Powerhouse 4500I224CC gas motor, MN 83171, SN 042/0041, 1 phase, 120/240 V, 30.8/15.4 amp, 60HZ, Brand new!

766
Hydraulic Unit*
Georgetown hydraulic unit with Honda GX690 motor, electric start, on running gear with quick connect hose, Like new condition!

767
Hydraulic Tank*
16'' x 16'' x 29'' hydraulic tank with Prince 2000 hydraulic motor, MN SP25A27A9H2-R, in good condition

770
Power Unit
2019 Deutz diesel, MN TD2.9L4, SN 12418725, 49 hp, 2200 RPM, 1 broken fan blade Almost New Condition

771
Power Unit
2019 Deutz diesel, MN TD2.9L4, SN 12418725, 49 hp, 2200 RPM, no fan blades or dipstick Almost New Condition

772
Power Unit
2019 Deutz diesel, MN TD2.9L4, SN 12433331, 49 hp, 2200 RPM, no fan blades or dipstick Almost New Condition

773
Power Unit
49 hp, SN 12369205, has broken water pump, selling as is Almost New Condition

774
Power Unit
MN TD2.9L4, SN 12115241, 72 hp, year 2017, Deutz diesel, almost new, condition unknown

775
Power Unit
MN D2.9L4, SN 12085035, 40 hp, year 2017, Deutz diesel, almost new, condition unknown

776
Power Unit
MN TD2.9L4, SN 11454725, 72 hp, Deutz diesel, almost new, condition unknown

777
Power Unit
MN TD2.9L4, SN 12467328, 49 hp, year 2019, Deutz diesel, almost new, condition unknown

778
Power Unit
GMC 150 HP V6 Diesel with right angle Clutch, on 2 wheel gear. Running condition. Battery not included.

798
Dump Hopper
3' x 5' x 31 Hopper (blue)

799
Grey Metal Hopper*
on wheels, 29'' x 48'' x 30''

799A
Shenniu Diesel Tractor
1997 Model 295T3F1 Runs and drives PTO works, Needs new Brakes and tune up.

800
Kioti Tractor
Kioti SL2410 Tractor with loader, showing 213 hours, SN NY5600263, year 2020, like new condition

801
Land Pride Brush Hog
MN RCR1248, like new condition

802
Rototiller
Kioti HCA475CS, SN PRA100016, rototiller 47'' wide, like new condition

803
International 660D Tractor
6 cylinder diesel engine 
has new battery
5 speed  
Runs good 
Drives but needs Torque Amplifier repaired
Tire tread low
S/N1857S-Y 

804
Farmall Model A
SN FAA1106070, rear belt pulley, PTO, 50% rubber on tires, 6V, restored, runs good

805
Farmall Model M
SN 173787X1

806
Ford Tractor
800, 4 cylinder gas, 70% rubber on tires, meter reads 533 hours, 5 speed, 3 point, good running condition

807
Diesel Kubota
B 7100, 4 wheel drive, 6 speed, 3 cylinder diesel, 541 hr. showing, PTO, 3 point. hitch, 50% rubber and a little dry rot, works good

808
Kubota Tractor
M4700, meter reads 4,345 hours, rear turf tires, 1 like new and 1 at 40%, rear 4 port hydraulic, PTO, good condition

809
Massy Harris
44 special Model 44 GIRF, SN 59952, Runs good, No pulley, PTO, 3 point. hitch, fender needs new oil case seal, 20% rubber, New battery

810
John Deere MC Crawler
1949 MC Crawler Older restoration New final drive 12" steel tracks 12 volt system s/n 10665 belt pulley and PTO work. Runs Good, Totally rebuilt from the Ground up New Steering Clutches and all. Nice Machine

811
John Deere Loader
John Deere 1020W, 48 loader, PTO, hydraulic, partial 3 point, tires are at 50%, 13.6-28 tires, repainted, 60'', has power steering and runs good. 3PTH works.

812
John Deere B Tractor
1941 Model B New Rubber Tires  Hand Start Runs good S/N 110597

813
John Deere 60 Tractor
1952 John Deere 60 New Battery Runs but engine is weak.  Ran when parked 2 years ago. S/N 6003767

814
John Deere LA Tractor
Like new rubber! John Deere Engine Runs Good, No S# tag, Has manual Rebuilt Starter Runs Good

815
John Deere M
1949 has PTO, Belt Pulley, 60% rubber, some dry rot, runs good, 2 point hitch fenders S/N 26479.

816
John Deere M
1949 M repainted, runs good, has PTO, 12V with new alternator, Like new rubber with dry rot S/N 33620

817
John Deere MT
1950 MT 80% rubber, 6V, 2 point hitch, Belt Pulley, PTO, Runs good, fenders S/N 17052

818
John Deere BR
1942 BR Hand start, Like new rubber, Has PTO, straight pipe, Runs good, fenders S/N 332648

819
John Deere AR
unstyled1936 AR , 90% rubber with dry rot on tires, hand start, runs good S/N 251502

820
John Deere D
hand start, 40% rubber on tires, PTO, belt pulley, works good

821
John Deere AN
1947 AN Hand start, runs good, 50% dry rot rubber, single front wheel, PTO, 2 point hitch, NO SN # plate

822
1948 John Deere BNH Tractor
1948 Serial # 229230 JD BNH with Rock box has PTO, Belt Pulley Single front Wheel, 40% Rubber, Left rear tire has very small air leak. 

2000

823
JD 40
1953 John Deere 40 , 2pt hitch, PTO, has 12V Battery but charger is not working, 60% rubber, runs good S/N 62665

824
John Deere 420W
1956 John Deere 420W Nice solid original condition, runs, tires at 60% with dry rot, 3 point hitch, PTO, fenders, 6V New Battery.S/N 88512

825
John Deere GM
1943 John Deere GM hand start, 80% rubber with some dry rot on front tire, has fenders, PTO, runs good, original gauges S/N 13695

826
John Deere D
1949 electric start, steel wheel with rubber, PTO, SN 184371, lights work, alternator is not working, runs OK

827
John Deere 620
 1958 SN 6216786, power steering, PTO does not work, 3 point works, belt pulley, runs good, like new rubber with dry rot, rear exhaust

828
1957 John Deere 620
1957 SN 6206873, as is, condition unknown, original condition

829
John Deere A Tractor
1950 JD Model A s/n 663337 50% dry rot rubber, Elec. Start, Runs & Drives needs tune up.

830
1949 John Deere A
1949 SN 614900, original condition, condition unknown AS IS

831
1/2 Scale John Deere Model D
on steel wheels, 56 wide x 87 long x 48 high, MN 141-589022, Kohler motor, Runs and operates good. 1 of 3 that are made. 4 speed

832
JD 4240
4240 JP-X about 1/3 scale Tractor, 1065 hr showing, Has Kohler Model M12426 Engine 50%, rubber 38" wide x 70" long x 42" High, Runs Good

833
John Deere 320-S Tractor
1957 SN 320465, MN 320-S, 2 cylinder, gas, like new rubber, 3 point hitch,draw bar, restored condition, runs well

834
John Deere B Tractor
1 new rear wheel, others about at 50%, complete, no SN # plate, not running, rebored block piston

835
John Deere 4 Cylinder Continennel Gas Motor
electric or hand start with clutch, runs

836
Ford LGT 148
Hydrostatic with 60'' deck, lights and mower work good, 14 HP new meter showing 26 hours, rubber on tires is 60%

837
Ford LGT 120
4 speed, 12 HP, runs but smokes little, rubber on tires is 40%

838
Bolens Garden Tractor
MN 750, with mower, snowblower, snow plow, and rototiller. Runs and works well and is in good condition.

839
2002 John Deere 6403 Tractor
Approximately 8400 HRS, 2x4, 85 hp, 50% rubber, Diesel Engine, 3 point hitch and PTO, Dual auxiliary hydraulic hookup, 3 speed w/ high,medium, and low gear, Roll bar, 4 way lights w/ trailer hookup.

840
Lumber Carts
4 carts, 36 x 60 x14'' Ready to be made into a train behind your tractor.

841
John Deere Tractor*
John Deere 1950 A, 2 cylinder, gas, tractor restored, electric start, PTO works, on full steel wheel, SN 660555, good running condition

842
Tractor
MN 4020, SN 14141955, 20 hp, 444 hours, Ingersoll hydraulic drive tractor, Onan gas 8:00-16, 6 bolt tires, 80% dry rot rubber with chains

843
Tractor
MN 4016, SN 14128867, 16 hp, 1725 hours, Ingersoll hydraulic drive, Onan gas 8:00-16, 6 bolt tires, 40% dry rot rubber with back blade and scraper blade, 1 port hydraulic

844
Log Splitter
24'' hydraulic drive log splitter on 14'' wheels

845
Snowblower & Snow Plow
48'' snowblower at 52'' x 20 snow plow, will fit Lot # 842 or 843

846
Ford Tractor
Ford  diesel tractor, as is, not running, rough condition

847
New Holland Tractor
MN TC33D, 40 HP SN G037465, 2637 hours, with 7308 loader with 60'' bucket, 70% rubber, canopy, 3 point hitch, PTO, 4 x 4, missing key, runs well and is in good condition

848
Ford Tractor
MN 2000, 236 hours, gas, 4 cylinder, 80% rear rubber, 1-front 70%, left front bald, power steering, 3 point hitch, PTO, drawbar, brakes need adjusted, runs well and is in good condition

849
Silver King Tractor
Silver King 4 cylinder gas tractor, motor # F7162312, SN 6211, not running and no battery, condition unknown

849A
Ferguson Tractor
Runs and Drives was driven to the Auction Site. It does need a new Starter. The starter on it is not working right.

850
New Holland Hay Elevator
16' Skeleton Hay elevator Model 132 s/n 539712 working condition.

850A
Implement Seats
Pallet of 10 Implement seats. Rusty

851
2 Bottom Case Plow
Case breakaway 2 bottom plow 3PTH.

851A
Plow
Single bottom plow for John Deere L or LA

852
Cultivator
spring tooth and cultivator for John Deere L or LA

853
Square Green Grist Mill
Belt powered Grist Mill.

854
Nordyke @ Marmon Co 20'' Grist Mill
Belt powered Grist mill.

855
Ohio # 13 Rare Cutting Box
with 8'' x 17 1/2'' wooden web, in good working condition, very nice piece, hard to find, 11' long x 43 x 45 Belt powered.

856
Buckeye Tractor Single Chisel Plow Attachment
New! MN 3090, SN 5372909, 3 point hitch

857
5' Wood Cadet Co Brush Hog
80'' long, 1 rust hole on top, working condition

858
3 Point Hitch Plow
2 bottom, good condition

859
Snow Blower
3 point hitch snow blower, good condition

860
Brush Hog
MN 5-4, SN 0053602, 60'' woods Dixie cutter, 3 point hitch, good condition

861
Finish Mower
MN MORO7200-2, SN 986057, woods RD7200 finish mower, 72'', 3 point hitch, good condition

862
Flail Mower
MN 917H, SN K420879, Ford 92'' flail mower, 3 point hitch, good condition

863
Rototiller
60" Rotomec Rototiller

864
Plow
14'' John Deere 2 bottom plow, 3 point hitch, good condition

865
Double Disc
John Deere 64'' double disc, 3 point hitch, good condition

866
Gravity Box
MN 181, SN 2093, New Holland, 6' x10' x 4', good condition

867
Wheel Weights and Chain Falls
2 Wheel weights off of Inter. 6 series 24" outside dia., 2 wheel weight off of Cockshut 21.5" Dia. and Yale Chain Falls.

900
2012 Dodge Grand Caravan Van
Mileage: 135,289
Body Type: 4 Door Van; Extended
Trim Level: SE
Drive Line: FWD
Engine Type: V6, 3.6L; FFV; DOHC
Fuel Type: Gasoline/E85
VIN #: 2C4RDGBG1CR349550

Features and Notes:

901
Ford 2015 Transit 350 IT. Van
189,700 miles, V6 motor, vinyl seat, power window, 15 passenger, 70% rubber on tires, very clean, front and rear air tow package, no rust, Florida van

902
1999 GMC Suburban 1500
8 passenger, 209,152 miles, 50% rubber on tires, runs and drives but selling as is, has some rust, 4 wheel drive works, tow package 5.7 ,Has a crack in the frame (left rear)

961

903
2002 Sterling L7500 Series Truck
Mileage:59,081
Drive Line: 6x4
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
VIN #: 2FZHATAK12AJ53210

Features and Notes: Automatic 3126 Cat and Cummins B 3.9-130 on vac pump, 4,351 hours, 5,285 engine hours

904A
1994 Ford Flatbed
Ford 9000, VIN R900VEA7233, 400 big CAM Cummins diesel, 75% rubber on tires, CDL air brakes, 17' 6'' x 90'' x 14 bed tail gate, set of 4 like new dry rot wheels, 401,8544 miles, 3553 hours, 5 speed manual, has some rust, runs good

905
1997 International 4900
6 Speed Auto DT530 Allison Trans Dump truck with Stainless steel salt spreader 28,200 org miles. Runs and drives.

906
2002 Ford 350 Powerstroke
MN F350, SN 1FTSX31F62ED557, 700 hp, year 2002, 7.3 diesel, extension cab, dually Powerstroke Turbo Built Transfer towing, air suspension on back, 70% rubber, fifth wheel, gooseneck, bumper hitch, cloth interior, no rust, 206,581 miles, is in good running condition!

907
Truck Tarp
8' x 48 truck tarp and sides, complete with no holes

908
Chevy C3500
1999 Chevy C3500 310,000 miles runs and drives. 5.7 V8 Auto according to mechanic well maintained, 8' bed has some rust towpackage and brake controller 80% left on rubber. Cracked windshield. VIN 1GCGC34R8X706400  Color White.

909
2012 Nissan Rogue
2012 Nissan/ Rogue 4 wheel drive 137,457 miles. Runs and drives, trans. has a slight hesitation, Cloth interior. VIN JN8S5MV5CW710115, Color K51 Trim K 80% rubber 4 cyl. automatic Power windows, has crack in windshield. 

950
Equipment Trailer
MN FIT 3-35 BT VIN 13N 84022-S-N1553844 YEAR 1992 FONTAINE 8' x 27' 9', 2' dovetail no ramps, Dual Tandem 7 tires 80% 1 50% 11' long tongue 6"x18 1/2" x 3/4" thick main frame, Cross members have some rust, tows great all lights work. Trailer will need some work.

951
Tilt Trailer
2018 22' MAXXD 16' tilt trailer, 6' flat, 83" wide between the fenders Needs New Axles, Brakes & Tires everything else is in excellent condition.

952
Jayco Eagle Camper
SN 1UJCJ02P351LF0286, 5th wheel camper, year 2005, Jayco 30' wide x 3' x 13' slide out, 6' x 20' awning, new battery, electric jacks,  roof AC, self contain water, sleeps 6, 90% rubber, loaded with fridge, freezer, microwave, stove, shower, toilet and sink. Very clean and in very good condition!

953
Gooseneck Trailer
2003 Mortiz Gooseneck 15'19" flat 5' dovetail, No Ramps, has rust, double axle, Lights & brakes need some work, 70% rubber

954
Trailer
Mid Atlantic 80" x 16' w/ 3 ramps, 2-7000 lb. axles, New jack, May need new tires, Rusty fenders, No title

955
Trailer
NOPCO Pintle Hitch dbl. axle Like new wheels 83"x16' deck 2 Ramps, 16x55 Brake Controls, No title, Was used w/ Lot #553

956
Trailer
81" x 11'4" with a 30" dovetail plus ramps

957
2014
5' x 10', 16'' sides, new spare tire, tartar, VIN 51GBUXEL012907, with ramp gate, excellent condition

958
Gooseneck Trailer
2018 Iron Bull  Gooseneck Trailer 22' flat 6' dovetail.

959
Trailer*
5' x 10' x 34'', homemade trailer with canvas rooftop, 4.80-12 spare tire, wood floor, 38 x 62 ramp gate

960
Trailer
77"x16' Home made trailer, fair condition, 45" tongue 12 volt 4500 lbs  winch, Brake away 1 tire no good rest 40% fenders some rust.

961
PJ Tilt Trailer
20' PJ Tilt Trailer

962
Landscaping Trailer
12' Landscaping Trailer

988
48" Quick Attach Forks
48" Quick Attach Forks

989
60" Quick Attach Bucket
Used 60" Quick Attach Bucket

990
ES HD Dump Hopper
3 YD Hopper Constructed in the U.S.A. with quality American steel, 1/4” steel base, 7 gauge steel sides,
3” Fork Opening, Strong, easy-to-operate latch, Safety Chain included to wrap around the mast of the forklift to prevent the hopper from coming off the forks, Fully welded seams, Overall Approx. Dimensions:  70.5″ Long x 57.75″ Wide x 55″ Tall, 3 cubic yard volume, 6,000 lb. capacity, Weight:  960 lbs. , Painted gray

991
ES Dump Hopper
2 1/2 YD Hopper  Constructed in the U.S.A. with quality American steel, 3/16” steel base, 10 gauge steel sides, 3” Fork Opening, Strong, easy-to-operate latch, Safety Chain included to wrap around the mast of the forklift to prevent the Hopper from coming off the forks, Fully welded seams, Overall Approx. Dimensions:  64″ Long x 69-3/4″ Wide x 46″ Tall, 2-1/2 cubic yard volume, 4,000 lb capacity, Weight:  700 lbs, Painted gray

992
Dump Hopper
2 YD Hopper 
  • 4,000lb. capacity
  • 619lb.
  • 3″ fork opening
  • 7 gauge sides
  • 7 gauge steel base
  • 68″ L x 57.75″ W x 46″ H
  • 28.5″ x 3″ fork pocket
  • Lip to ground 33″

993
Bale spear
Round bale spear. Weight145 lbs
Spear & Stabilizers49″ spear & 18″ stabilizers
Capacity3,000 lbs
Frame46″ x 6″ x 19″

994
Bale Spear
Square bale spear Weight185 lbs
Dimensions57 × 19 × 6 in Spears 3 – 49" Spears
Capacity 3,000 lbs
Frame 46" x 6" x 19" 3 square 1/4" wall frame

995
ES 72" Brush Cutter
BRAND NEW Open front face design
2” drive shaft
3 hardened steel blades- 5″ x 1/2″
Grease filled drive, with greaseable zerk fittings
160 cc motor for machines 15-26 GPM
Steel runners on each side for ease of use over multiple terrains
Comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers
Weight: 1350 lbs.

996
Snow Pusher
Brand New 6' XP, 30+HP 77x34x31, 4cu.yd 620lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

997
Snow Pusher
Brand New 7' XP30 35 +HP 89x34x31 5 cu. yd 655 lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

998A
Snow Pusher
Brand New 8' XP30 Pullback, 40+ HP, 101"x34"x31" 6 cu yard 820 lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

999
Snow Pusher
Brand New 10' XP30 60 + hp, 125" x 34" x 31" 8cu yd 775lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

1000
Reliable Driveway Grader
Brand New Quick attach for skid steer 86" W 72" L  22" H

1001
Reliable Driveway Grader
Pull behind 48" x 46" x 6"

1002
Forks
4'' x 48'', stout USA made, used condition

1003
Brush Grapple
66'' Brush Grapple Tomahawk brand, 1 hydraulic cylinder, used condition

1004
Koyker Post Pounder
SN K682758133216, year 2011, in good working condition

1005
Sawdust Bucket
8' wide, 45'' deep, 35 high sawdust bucket with fork pockets

1006
Brush Grapple
72" used Cat double cylinder Brush Grapple

1007
Land Pride Rake
MN LR1596, 3 point rake, 8' wide, in good condition

1008
John Deere 65
7' 3 point blade, 17'' high with caster wheel

1009
Platform
48 x 44 x 4'', 3 point

1010
Slip Scoop
30 x 32 x 12, 3 point

1011
Ford Sickle Bar Mower
3 point, 6' sickle bar mower, SN 36769

1012
Boomlift
3 point, 7' long

1013
Set of 2 Steel Tracks
9'' wide x 11' 6'' used.

1014
Hydraulic Bucket with Fork Pockets*
48'' x 30'' x 26''

1015
HD Ripper*
74'' , 36'', 3/4" Dia. teeth with quick attach plate used

1016
2 Tires*
2-9 lug, 13.50-16.1 tires, 40% tread

1017
John Deere Blade*
7' x 16'', 3 point blade

1018
ES Skid Steer Bucket
New! 96'' snow/mulch bucket Steel Cutting Edge1/2″ x 6″
Bucket Specs11 gauge bucket with 3/8″ reinforcement on sides and 1/2″ reinforcement on bottom
38″ deep
27″ tall, 1.28 cubic yards

1019
ES Skid Steer Bucket
New! 78'' snow/mulch bucket, Steel Cutting Edge1/2″ x 6″
Bucket Specs11 gauge bucket with 3/8″ reinforcement on sides and 1/2″ reinforcement on bottom
38″ deep
27″ tall, 1 cubic yards

1020
ES Skid Steer Bucket
New! 72'' bucket with bolt on edge, Weight715 lbs
Dimensions34.75 x 72 x 20-5/16
Steel Cutting Edge1″ x 8″ welded on cutting edge
5/8″ bolt on cutting edge
Bucket Specs1/4″ thick sides, 1/2″ thick bottom. 1/4″ thick back with 1/4″ thick reinforcement plate at quick attach
Capacity.63 cubic yards

1021
ES Skid Steer Bucket
New! 60'' snow/mulch bucket, Weight360 lbs
Dimensions60 × 38 × 27 in
Steel Cutting Edge3/4″ x 6″
Bucket Specs3/16″ sides and bottom with wear bars for reinforcement. 1/2″ wear bars
Capacity.8 cubic yards

1022
ES Skid Steer Grapple
New! 72'' rock grapple 3/8″ teeth and sides, 72″ x 34″ x 19″, 3″ square tube frame,1 cylinder grapple with 3000 PSI hoses, 1/2″ flat faced quick connect couplers

1023
Skid Steer Grapple
New! solid bottom, 66'' rock grapple, Comes with hoses, fittings and couplers, Dual Hydraulic Cylinders with covers, Includes 1/2″ flat faced quick connect couplers that fits almost any skid steer hydraulic system, 2″ x 8″ AG cylinders, Independent grapple tines – makes uneven loads easier to grapple, Universal Quick Attach mount, 8.5″-9″ spacing between tines, Recommended for compact tractors and machines with 40 hp or les

Our grapples are powder coated black for long lasting performance.


1024
Skid Steer Grapple
New! 72'' double grapple, 1/2″ steel tines, Independent grapple tines – makes uneven loads easier to grapple, Dual Hydraulic Cylinders with covers, Includes 1/2″ flat faced quick connect couplers that fits almost any skid steer hydraulic system, Universal Quick Attach mount, 2″ x 8″ AG cylinders, Comes with hoses, fittings, and couplers., 8.5″-9″ spacing between tines Weight505 lbs.
Dimensions72 × 36 × 28 in
Steel Serrated Tines1/2″
Open Height32″ Front and 37″ Center
Closed Height17″

1025
John Deere Hook Up Bucket
60'', 400/500, Weight345 lbs
Dimensions60 × 30 × 27 in
Steel Cutting Edge, 3/4" x 6"
, Bucket Specs, 3⁄16” thick sides 3⁄16” thick bottom with wear bars for reinforcement
, Capacity .4 cubic yards

1026
Skid Steer Forks
New! 42'' Dingo fork attachment

1027
Skid Steer Forks
New Dingo 48" forks

1028
ES Skid Steer Forks
New  HD 48" skid steer Forks 6,600 lb. lift capacity 

1029
ES Skid Steer Forks
New ES Walk Thru 48" Forks 4,000 lb lift capacity

1030
ES Skid Steer Forks
New ES Standard 48" Forks 4,000 lb lift capacity

1031
Quick Attach Hitch Plate
New Quick Attach Hitch Plate 

1/4″ thick plate

Works with 2″ receiver


1032
80" Grapple
80" grapple Lite duty 1/4" plate 

1036
Snow Plow*
 11' 6'' blade, 38'' high-50'' high, good condition

1037
Sweeper*
80'' sweeper, hydraulic drive on front of truck mount, good condition

1038
Gravel Tray*
36'' x 94'' x 12'' steel gravel tray for back of truck, good condition

1039
Ditch Brush Mower*
MN RB215B, SN 12228,VMC 3 point hitch with controls, 48'' wide, good condition

1039A
Ditch Cleaner
MN BS52Y, SN 750801901, 12'' hydraulic drive

1039B
Tamper*
2.3 hp, Wacker gas powered, weight 117 lbs. 

1039C
Gravel Spreader
8' tailgate gravel spreader, hydraulic drive

1039D
Gravel Spreader
8' tailgate gravel spreader, hydraulic drive

1039E
Fork Extension
fork extension 5 1/2'' x 2 1/4'' x 10', 6600 lb. capacity

1040
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate, Call Bronson 574-210-3721

1041
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'' new in crate, Call Bronson 574-210-3721

1042
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'' new in crate, Call Bronson 574-210-3721

1043
New Skid Steer Rock Grapple Bucket
New 72" Rock Grapple Bucket. Call Bronson 574-210-3721

1044
New Skid Steer Rock Grapple Bucket
New 72" Rock Grapple Bucket. Call Bronson 574-210-3721

1045
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1046
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1047
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1048
New Skid Steer Snow Plow Attachment
86'' wide. Call Bronson 574-210-3721

1049
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate, Call Bronson 574-210-3721

1050
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate, Call Bronson 574-210-3721

1051
New Skid Steer Vibratory Roller Attachment
72" wide, not for high flow hydraulics

1052
New Greatbear Skid Steer Brush Mower
66'' wide cut, quick attach. 

1053
Fork Extension
2 1/4 x 5 3/4 x 7' fork extension

1054
Fork Extension
2 1/4 x 5 3/4 x 7' fork extension

1055
Fork Extension
2 1/4 x 5 3/4 x 66'' fork extension

1056
Fork Extension
2 1/4 x 5 3/4 x 66'' fork extension

1057
Weld on Plate
weld on quick attach plate

1058
Weld on Plate
weld on quick attach plate

1059
Weld on Plate
weld on quick attach plate

1060
Weld on Plate
weld on quick attach plate

1061
Weld on Plate
weld on quick attach plate

1062
Weld on Plate
weld on quick attach plate

1063
Weld on Plate
weld on quick attach plate

1064
Weld on Plate
weld on quick attach plate

1065
Grapple
66''

1066
Grapple
74''

1067
Grapple
79''

1068
Grapple
84''

1069
Hitch Plate
quick attach hitch plate

1070
Hitch Plate
quick attach hitch plate

1071
Hitch Plate
quick attach plate

1072
Hitch Plate
quick attach plate

10000
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Lake Erie Equipment Consignment Auction
 Live Auction
 
Auction Date(s)
Friday Oct 28, 2022 Completed
Auction Location

Middlefield, OH 44062
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 60 days. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Consignments Wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or John Causey 440.904.0250 (jc2559@gmail.com) fax 440.693.4316.

00
Information Lot
Consignments Wanted! Including but not limited to: sawmill, pallet shop, industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. Call Daniel Miller: 440.693.4232 or 440.321.5965 fax 440.693.4316

539Y
Heavy Equipment Key Set 39 Keys
Shipping available for $20

80

539Z
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

81

101
24 Cubes of Assorted Hex Bolts
Grade 5 hex bolts, 1/4'' up to 1'' diameter, socket head bolts

540
New Husquarna
372 XP, SN 2021-1800685, with a 20'' bar

100
6 Cubes of Assorted Hex Bolts
Grade 8 hex bolts, 1/4'' up to 3/4'' diameter

541
Stihl 661
24'' bar, in good condition but has a small oil leak

102
12 Cubes of Assorted Carriage Bolts
1/4''-1/2''

542
Stihl 311
used with a 20'' bar, in good running condition

334

103
12 Cubes of Assorted Nuts, Lock Nuts, and Washers

543
Husquarna 41
used, 18'' bar, SN 95341H0139

335

104
8 Cubes of Assorted Metric 8.8 Hex, Socket Bolts, and Misc. Nuts

550
2012 Cat 259B3 Skid Steer
PIN CAT0259BLYYZ03104, meter reads 3350 hours, two speed, joystick controls, aux hydraulics, has suspended undercarriage, good working condition

336

105
8 Cubes of Assorted Lags
1/4''-1/2''

551
Kubota SVL75-2 Skid steer
Kubota 2015 SVL 75-Z speed track skid steer w/ 3297 hr., tracks are 50% and has standard flow hydraulics, comes with 72" bucket, enclosed cab w/ heat and air, no def fluid

337

106
24 Cubes of Assorted Wedge Anchors, Tapcons, EZ, Lead Anchors, Cable Clamps, and Misc.

552
2018 Bobcat T 590 Skid steer
Bobcat T590 Skid steer w/ 3135 hr., has 78" Bobcat Bucket, heat, air, enclosed cab, standard flow hydraulics, Like new tracks, new step, new quick attach, cylinder, new lights, no def fluid, foot pedal controls.

338

107
24 Cubes of Assorted Wood/Sheet Metal, and Self Drilling Screws

553
John Deere 260 Skid steer
JD 260, 3885.9 hr. showing, SN T002608914003, Stock # 71576 w/ Like new wheels w/ 66" bucket, Nice clean working unit. Fully enclosed cab with heat.

479
Insulation
14 pallets, approx. 225 pieces, 4' x 4' insulation from 1 1/2''-4 1/2''

108
16 Cubes of Assorted Phillips Flat and Pan Head Bolts, and Wing Nuts

480
Insulation
12 pallets, approx. 204 pieces, 4' x 4' insulation from 1 1/2''-4 1/2''

554
2007 Bobcat T300 Skid Steer
Meter reads 6981 HRS. Lot of Rebuilt Parts, SN-532015485, 78" bucket, 18" rubber tracks w/ approximately 50% tread, Hands free quick attach, Auxiliary hydraulic hookup, Enclosed cab - no door, Has heat, AC, radio, and hand and foot controls, Keyless start

109
12 Cubes of Assorted Pins, Bearings, Rivets, Plugs, Wedges, Fasteners, and Screws

555
Kubota SVL 90-2 Skid Steer*
MN SVL90-2, SN 1012654, 7924 hours, has air and heat, has broken glass in door, both windows missing 1 piece of glass, 1 new track and 1 like new, 3010 lb. capacity, runs well but has some wear

485

110
24 Cubes of Assorted All Stainless Steel Bolts, Screws, Nuts, Washers, and Brass Screws

556
Cat 257 Skid Steer
ASV tracks with Cat motor, 3901 hours, SN CAT00257LCMM00730, with hitch, 15'' tracks, fully enclosed cab, air and heat not working, nice clean unit

490

111
9 Cubes of Assorted Grade 5 Hex Bolts
fine thread, 1/4''-5/8'' diameter

494
Pressure Washer
333 hours, Landa Steam Pressure washer, MN PHW53-11021D, 120 V, 1 phase, 1000 PSI, came out of storage, condition unknown

559
Loegering VTS Tracks
Were used on LS 190 NH Will fit most other models. Rubber has less than 75 hrs. 18" wide x 88" x 32", 8 Lug 493/4" center to center of axle, 5 bottom rolls.

112
16 Cubes of Assorted Spacers, Wood Screws, Screen/Storm Door Hardware, and Brass Barb Fitting

495
Brush Cutter*
24'' Bachtold Brush Cutter, Honda G x 270, needs new tire, condition unknown

559A
Skid loader wheel Spacers
Set of 4 Wheel Spacers. 8 Lug.Came off of Case Skid Loader.

113
54 Drawer Cabinet
Loaded with Brass flare, compression fitting, and brass barb fittings

495A

559B
Skid Loader Tires
10-16.5 NHS tires 40% tread left. Solideal Gripper

114
18 Drawer Cabinet
Loaded with drill bits, taps, dies, shaft cover, over 300 pieces!

496
Sprayer
Finco pull behind sprayer 42'' with 12 V pump, looks good

560
Sky Trak
MN 8042, SN 0160028213, 84 hp, 3740 hours, year 2007, new foam filled tires 1 year ago, Right front tire has small air pocket, Cummins Diesel, quick attach 4'' x 60'' forks, runs well and is in very good condition.

580
Yale Forklift
SN 313475, 5000 lb. capacity, forklift #GLPOSORBJUATO86, weighs 9000 lbs., 4'' x 42'' forks, meter reads 9261 hours, 28 x 12.5-15 solid pneumatic front tires with a gas engine, Runs and drives but engine needs tune up. 

115
Cabinet Full of Drill Bits
full of wood, metal, and masonry drill bits, 1/16''-1/2'', 0-80-3/4, over 300 pieces!

497
Craftsman Pressure Washer
4.5 hp, 1800 PSI, gas pressure washer and Craftsman, 4.4 edger trimmer, condition unknown

116
Round Carousel Full of Brass Valves and Copper Fittings
Full of brass valves of all kinds, assorted copper and brass fittings

581
2003 Manitou Forklift
Model TMT320FLHT/W, SN 181149, meter reads 438 hours on new gauge, 5000 lb. capacity, like new tires, has truck mount, Lister Petter Diesel with truck mount, 4-2'' x 48'' forks, 31-15-5-15 tires, 70% rubber on tires, works and runs good

498
Dump Trailer
MN PCT-17JD, 16'' wheels, 39 x 58 x 32

117
Cabinet with Assorted Wire
cabinet has 37 rolls of assorted wire

583
Cat Forklift
Model NOR30P, serial # 2LL-00825, electric order picker, 24 V with charger, 3000 lb. capacity, new battery 2 months ago, comes with 3 phase charger

118
Shelf Full of Electric Outlets, Splitter, 3 Way Switches, and Misc.

585
Hyster Forklift Mast
3 stage, model 190.0/4830-322584, no forks, 16" wide mast

119
Cabinet Full of Assorted Brass Valves, Coupling, and Misc. Plumbing

586
Block Hog Walk Behind Forklift
1400 lb. lift capacity, 77" lowered mast height, runs and operates 

120
Cabinet Full of Brass Compression Fittings, Lots of Brass Fittings and Misc.

587
Clark Forklift
Model CMP30L, serial # 0M230L0480-9586KF, 4" x 48" forks, meter reads 6159 hours, LP gas, solid tires, sideshift, runs good

121
Cabinet Full of Steel Pipe Fittings and Nipples

598
Forklift Forks
6"x43"       20" Mast Plate

122
Cabinet Full of Mostly Galvanized Pipe Fittings

599
Forklift Forks
5"x42"    16" Mast Plate

600
Ford Backhoe
Ford 6500 Backhoe with 24'' and 45'' Hoe bucket, 18.4-28 tires, tires 40%, 85'' wide front bucket, 2 extra down rigger pads, older but runs good, small minor oil leak, New battery, CALP350BSA8187, weight 17,000 lb.

123
Cabinet Full of Mostly Galvanized Pipe Fittings

124
Pallet of Assorted Eyebolts, Lags, Cable Clamps, and All New Hardware

601
John Deere 310 Backhoe
Runs but needs some TLC, S/N 135573T Type 301B

125
Cabinet Full of 1 1/2''-2'' Copper Fittings and 1 1/2''-2'' PVC

602
Asphalt Roller
41" Vibrating Roller, towable with Deutz Diesel, 2 cyl, meter reads 924 hours, Working condition

126
Cabinet Full of Chrome and Brass Plumbing Parts and Misc.

603
Asphalt Roller
Gallion rubber tire roller, 6 cylinder gas motor, runs good, was driven  to the auction site approximately 1 mile, 2496 hours, SN 9RC-12G5071

127
Cabinet Full of Mostly Galvanized Pipe Fittings

610
Crawler Loader
John Deere 455 E Crawler loader, To 455EX717489, meter reads 423 hours, 6'x42' forks John Deere winch

128
Cabinet Full of Copper and Brass Fittings
1/2''-1''

611
John Deere 450D Dozer
John Deere 450D Crawler dozer to 450DC709103, 6981 hours showing, 7' 6'' x 30'' dozer blade w/ John Deere winch

129
Cabinet Full of Galvanized and Regular Pipe Nipples

612
Yanmar Forwarder
C50R, 4413 hr. showing, Like new, 20" Rubber Tracks, 136" long, No Picker, 4 cylinder diesel, 9' x 8" x 7' long deck, needs final drive work. Was running 2 years ago when parked currently not running.

130
Cabinet Full of Galvanized and Regular Pipe Nipples

619
2005 Case 850K XLT Series 2 Crawler Dozer
PIN-CAL004925, 20" tracks w/ 75% tread remaining, 8'6" 6-way blade, 4 cylinder diesel engine, Meter reads 4347 hours, Fully enclosed cab w/ Heat/AC, radio, and joystick controls.

131
36 Drawers of Brass Pipe Fittings and Misc. Plumbing Parts

620
2002 Bobcat 322D Mini Excavator
PIN-223514770, 9" rubber tracks w/ 75% tread, Meter reads 1268 hours, 16'' bucket, Open Cab.

132
72 Drawers Assorted Copper Fittings, Brass Flare, Compression Fitting, and Misc. Plumbing

621
2012 Bobcat E50 Mini Excavator
6300 hours on rebuilt engine, SN-AG3N12349, 4 cylinder Kubota diesel engine, Machine weight - 10,842 lb, Enclosed cab w/ Heat/AC and radio, 16" rubber tracks w/ approximately 70% tread, 78" blade, 24" bucket, 15" hydraulic thumb, Quick attach, Auxiliary hydraulic hookup.

133
3 Cabinets of Drill Bits
1 cabinet of A-Z, 1 cabinet # 60-1, 1 cabinet # 1/16-1/2 (over 500 pieces)

622
20" Bucket
20" Bucket fits Komatsu

134
Pallet of Assorted Screws of all Kinds

622A
36" Bucket
36" Bucket fits Bobcat E50 and more

135
Pallet of Assorted Wood Screws and Washers

622B
16" Bucket
16" Bucket fits Bobcat E50 and more

136
Pallet of Assorted Grade 2 Hex Bolts

622C
12" Bucket
12" Bucket fits Bobcat E50 and more

137
Pallet of Assorted Lags

622F
24" Bucket
24" Bucket Wain Roy coupling Jaw Bucket for excavator Model 003-024

138
Pallet of Assorted Grade 2 Hex Bolts
Assorted sizes

622G
12" Bucket
C-P Enterprises Takeuchi

139
Pallet of Assorted Nuts and Washers

622H
Excavator Bucket
60" wide, 32" deep, 29" high

142
Pallet of Assorted Grade 2 Hex Bolts

623
Blower
Black 13 x 34 Blower, Line Shaft ready, 15" Inlet & Outlet

140
Pallet of Slotted Flat and Round Head Bolts

624
Blower
Green 8 x 26 Blower, 10 HP, 3phase, electric drive w/ collection box, 10" inlet, 8" outlet

143
Pallet of Assorted Carriage Bolts

625
Log Turner
Mellott Log Turner, Hydraulic Drive

141
Pallet of Assorted Lags

626
John Deere Winch
John Deere winch, SN 10WM112511775 w/ cable Worked when taken off of skidder

144
Pallet of Assorted Grade 2 Hex Bolts

627
John Deere Winch
MD10WM112006750, No Cable Worked when taken of off skidder

145
Pallet of Assorted Carriage Bolts

628
Winch
Gearmatic Model 19 winch off 450 Case s/n 16929

146
Pallet of Assorted Slotted Screws and Bolts

629
Woody Log Carrier
Woody CH-130-HD, SN 1707CH130013, 6 wheel log carrier with grapple, Honda HP Motor, hydraulic operated, works good

630
Winch
Hyster D7H winch, MN 677P2219K, SN HY7G15, condition unknown

147
1 Skid Assorted 1 Lb. and 5 Lb. Screws
Approx. 150 lbs.

631
Eager Beaver 1821 Chipper
5-14-21 Mobark, VIN 458S21611LWO26316, 647 hours, 165 HP., gas, PSI 39253643115, has title

148
1 Skid Assorted 5 Lb. Nails
Approx. 185 lbs.

149
1 Skid Assorted 1 Lb. and 5 Lb. Nails
Approx. 150 lbs.

632
Altec Chipper
Model DC12117, SN 5W054151575200148, Cat 3054C Diesel, rusty but runs and works, new battery, does not have right wheels

150
1 Skid of Assorted 1 Lb. Nails
Approx. 186 lbs.

633
Reckart Blower
42'' blower, 12'' wide, 10'' paddles, 2 3/16" line shaft ready, 18'' inlet, 12'' outlet

151
Pallet of Assorted # 3, 6, 8, 10, 12, and 16 Roofing Nails
1 1/2 nails

634
Blower Pipe
9 pcs., 8'' x 14' blower pipe, 2 elbows

152
Pallet of 12-50 Lb. Boxes of Hand Nails
4d, 8d, 10d, 16d, 20d

634A
Blower Pipe
Bill Assorted Blower Pipe fittings

153
Pallet of 8-50 Lb. Boxes
8, 10, 12, 16, drywall nails and screws

635
Mellott log Turner
Hydraulic chain, 36'' chain, excellent condition

155

636
Green Log Turner
40'' chain, hydraulic drive

157
Maytag Wringer
wringer only, Excellent condition and completely rebuilt

637
Meadows Log Turner
# RT 124-92, hydraulic drive, 30'' chain

156
Battery Wheelchair
Quickie Battery Wheelchair, SN M715C-113612 with charger, 2016, Like new condition!

638
Vertical Edger
2-20'' blades, electric over hydraulic, 6 groove pulley

160
Belt Lacer
# 3 6'' chipper, belt lacer, good condition

639
Cornell Blower
9'' x 26'' blower, 10'' inlet, 8'' outlet, 7'' wide paddle, line shaft ready

640
2022 Wood-Mizer LT-40 Portable Sawmill
VIN 456C62414NNHK4969, BRAND NEW MACHINE, came directly from the factory, fully hydraulic, debarker, gas engine, loading arms, log turner

158
Square Maytag Wringer Washer
with electric motor, excellent condition

641
1994 Woodmizer LT 40
1994 LT 40 HDG24 with 12'' extension, 26'' throat, VIN 456A52410RIHE8261, cuts up to 32'', fully hydraulic, no mud saw, 652 hours showing, Onan 24 HP gas motor, 12 extra blades

159
Round Maytag Wringer Washer
with electric motor, no lid, good condition

161
Husky Sprayer
25 gallon, 12V sprayer, no battery, works good

641A
WoodMizer Bands
4 Boxes at 15 Blades each  0.045x1.25x158.10

162
Banding Cart
New in the box!, U Line Model H39

642
Woodmizer Band wheels
LT 40 woodmizer 19'' premier band wheels

168
Electric Grinder
Milwaukee 5'' grinder, with tool bag, like new condition!

643
F8 Simonds*
60'', 56 tooth, 6-7 gauge, good condition

169
Skid of Tee Hinges
6 boxes, 5'' zinc tee hinge nylon bushing, 100 pcs. per box

644
60'' F8 Simonds*
54 tooth, 6-8gauge, good condition

170
Skid of Tee Hinges
6 boxes, 4'' zinc tee hinge with nylon bushing, 100 pcs. per box

645
Frick Mandrel
Frick top Arbor, 1 1/2'' shaft

171
Skid of Tee Hinges
6 boxes, 4'' black tee hinge, 100 pcs. per box

646
Cat Claw Band Sharpener
12 V, working condition

172
Skid of Tee Hinges
6 boxes, 5'' zinc tee hinge, 100 pcs, per box

647
Woodmizer Auto Sharp Control
with 12 V motor, working condition

651
Frick Edger
SN 2867, 27'' wide, 1 adjustable blade, 90'' infeed, 94'' outfeed, 17' 8'' overall,  2-14'' blade with 6'' blower, set up for boards

173
Skid of Screws
6 boxes, 10 x 2 1/2 zinc square drive screws, 2000 pcs. per box

174
Skid of Screws
6 boxes, 10 x 2 black oxide square drive screws, 2500 pcs. per box

652
Frick Gang Edger
SN 5824, size 27, 2-14'' blades, 1 movable blade, 9' in feed, 7' out feed

175
Skid of Screws
6 boxes, 10 x 1 Hex washer screws, galvanized for metal roofing, 3000 pcs. per box

653
Cornell Edger
SN SE249170, 2-18'' blades, 1 movable blade, 36'' wide, 8' in feed conveyor, line shaft ready, needs new feed rolls, in working condition

176
Skid of Screws
6 boxes, 10 x 2 zinc square drive screws, 2500 pcs. per box

654
Miner Edger
SN FB9212, 4'' x 24'', 3 blades, 14'', 2 removable, 6' in feed, 9' out feed

177
Skid of Screws
6 boxes, 10 x 2 1/4 black oxide square drive screws, 2000 pcs. per box

655
Meadows Edger
SN 36D-1832-05, 36'', 3-16'' blade edger, 2 movable blades, 8' in feed, 2' out feed, line shaft ready

178
Chain Links
Pallet of assorted new chain links, Repair from big to small!

656
Lumber Cart
42 x 75 lumber cart, 3 x 8 wheels, 1 1/2 x 4'' metal frame

179
Springs
Pallet of new assorted springs

657
Lumber Cart
42 x 75 lumber cart, 3 x 8 wheels

180
Vac/Air Gauges
All new!, Over 140pcs., up to 2000 PSI

658
Pulley
25" 2 3/8" shaft 3 groove number 3B250R

181
Vac/Air Gauges
All new!, Over 70 pcs., up to 2000 PSI

659
Hemco Trim Saw
Double M trim saw complete (8 blades) with 14'' x 18' waste conveyor, good electronics, extra set of blades and spare parts, 1 saw motor, drive gear box needs rebuilt, taken out of service 7-5-22, 84'' wide x 24' x 100', feeder 76'' wide x 18' 6'' x 60'' tall

182
Allen Wrenches
whole skid of new and used, assorted sizes

660
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

183
Generator
Power Partner 6000WAH, 120/240, Kawasaki wheels need attention, unit works good

661
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

184
Torch Set
Harris torch with cart and tanks, condition unknown

662
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

185
Flagler
SN 2307, sheet metal flagler, works

663
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

186
Crescent Wrenches
18'' and 24'' China Crescent wrenches, Like new!

664
Lumber Cart
4' x 8' x 12'' lumber carts, 8'' rigid, 6'' swivel caster

187
Electric Tools
GMC Biscuit Jointer, buffer, multi tool, all in working condition

665
Miner Edger
SN FB9142, 24" wide 2-14" Blades, 1 movable, 6' infeed 7' outfeed w/ sawdust Box

188
Machinist Tools
6 pc. Outside micro meter Starret caliper and gauges

666
Lumber Cart
42 x 72 x 16" Lumber Cart, New 2 x 10 Phonelic Wheel, 

189
Drill and Router Bits
Steel drill bits, router bits, taps, some new, approx. 200 pcs.

667
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2 x 10 Phonelic Wheel,

190
Cutting Torch Set
Harris cutting torch with gauges and hose

668
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2 x 10 Phonelic Wheel,

191
Cutting Torch Set
2 boxes, new and used cutting torch, tips and misc.

669
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

192
Roll Chain
2 new rolls, 40LLR, 50', 1 new roll # 80 x 200

670
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

193
Armstrong Stand
# 933, 1/8-1 1/4 Rigid pipe threaders with cutter @ Reamer, good working unit

671
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

194
Rigid Stand
# 460, 1/4-1 1/4 Rigid pipe threader with cutter@ Reamer, good working condition

672
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

195
Oster Pipe Threader
Oster 142-5 Electric portable threader with # 65-R, 1'' - 2'' pipe threader, good working condition

673
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

196
Rigid Threader
model 200, 1 phase, up to 2'' pipe on tripod stand, works good

674
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

200
Grob Metal Cutting Bandsaw
Grob 1977 24'' Metal Cutting Bandsaw, MN 4V-24, SN 1203 with blade welder, 3 phase, 240/480, 24 1/2'' band wheel, 198'' band

675
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

201
Marvel Metal Cutting Bandsaw
MN 712M, SN 712M88251, hydraulic up and down, 2 new 8' 11'' blade, works good

676
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

202
Chain Hoist
Brand new! 10 ton CM chain hoist, SN S3385WP

677
Lumber Cart*
42 x 72 x 16" Lumber Cart, New 2x10 Phonelic Wheel,

232

678
Skate Rolls
2-36'' x 10', 2'' rolls, 1 is missing some rolls

249
Iron Worker
Edwards 75 Ton Ironworker, SN 02847594, box of extra punch dies, electric, 5 HP, 3 phase, good working condition!

679
Skate Rolls
36'' x 10' x 2'' 

250
Iron Worker
Edwards 55 Ton Ironworker, SN 21255500, box of extra punch dies, set up for hydraulic, works

680
Skate Conveyor
35'' x 10'', 3 pcs.

300
Kreg Jig
1996 Kreg Jig Model DK, SN 12474, pocket hole boring machine, air powered foot control, 21 x 38 table, works good

681
Skate Conveyor
35'' x 10'', 3 pcs.

301
Powermatic Bandsaw
Model 81 Bandsaw, 19'' throat, SN 91165, 20'' x 1 1/4'' band wheels, 149'' bands, 1 new extra blade, line shaft ready, works good

682
Aluminum Elevator
5'' x 16', with electric motor works

302
Mini Max Shaper
Model T3, SN KF8279, hydraulic drive, 1 1/4'' spindle, 2 grizzly 1/4 HP, power feeder, Like new! Excellent condition!

683
Edger
Edmiston Edger 2 movable 16" Blade 28" 7' infeed - 6' outfeed, Fully hydraulic. Has small hydraulic leak but works good

303
Delta Shaper
MN 43-431X, SN 06C11561, hydraulic drive with extension table, 2 1/4 HP, Grizzly power feeder, Like new! Excellent condition!

684
Laser Rack
Edger Laser Rack FBW50110R 1000L off of lot 683.

306
Air Motor
6 Model 4AM-NRV-130, all in new condition

685
Belt Conveyer
31' x 14" Conveyer belt w/ Robin Ey 28 Gas Motor

310
Panel Saw
Robland 2320 Panel Saw

686
Morbark Chip Blower
 30 HP, 3 phase, 46" Drum 7' x 18' pipe, 14' overall w/ mounting plate

311
Jointer
PF310, year 1988, 220V, SN 8838, 12 x 84'' bed, 2 extra set blades

687
Cant Sizer
12" Cornell cant sizer, SN 101-12-81, 25 Hp, 230/460 V

312
Jointer
12 x 60'' bed, heavy duty

688
Lumber Cart
48 x 106 x 41 Steel cart, 10 x 2 1/2 Wheel & Drum Cart

313
Chop Saw
DW705 DeWalt chop saw, electric

689
Barn Sweep
Pallet of 16" Barn Sweep Repair Links

314
Rockwell Shaper
SN 117-8110, 27 x 36 table

690
Steel Banding
12 rolls, 3/4'' x .025 banding

315
Radial Arm Saw
18'', Rockwell Radial Arm Saw, MN 40-C-1, SN DT2059

691
5/8 x .020 Banding
12 rolls 5/8" x 0.20 banding

316
Powermatic Planer
20'' planer, 4 straight knives, 3 phase, 220/240

692
Lumber Rolls
36" x72" x34" Lumber Rolls

317
Band Saw
Jet 18'', MN JWBS-18QT3, 18'' wheels, SN 1012965, 3 HP, 230V, 1 phase

693
Lumber Rolls
18" x120" x 34 Lumber Roll

318
Table Saw
10'' Delta unisaw with 52'' fence, 34-802, SN 92L97260

694
Trough Conveyer
Trough Conveyer, 17" Belt, 22' overall, 41" high to 56" high , 3 phase, 1 Hp

319
Router
24 x 32 router table with porter cable router

695
Steel Table
47"x 42" x 38 H.

320
Edge Sander
1 1/2 HP, 3 phase, 4'' x 96''

696
4 Strand Live Deck
6' x 12' x 48" 4 Strand Live Deck, 2 Hp, 3 Phase Electric Drive only 3 strand chain

321
Belt Disc Sander
Powermatic 6 x 24 belt, 12'' disc

697
Plastic Roller conveyer
18" x 10'6" x 35" Eds IDAB Plastic Roller conveyer on casters, 3 phase, 1/2 Hp

322
Powermatic Drill Press
MN 1150, SN 8615V170, .75 HP, 1 phase

698
Sawdust Auger
13" x 34' Sawdust Auger, 3 hp, 3 phase, 208/460V

323
Phase Converter
Phase master model D-15, 10V, 230/460 input, 30V 230/460 output, max 10 HP

699
Roller Conveyor*
42'' x 72'' roller conveyor, with set of 34'' legs, 2'' rollers

324
Work Bench
55 x 64 x 34 butcher block top with 3 vices

699A
Keystone 2 Head Resaw with Runaround System
Electric drive on heads, 1 1/4"x38" band wheels, 1 1/4" bands, 6"x80" feed belt, Air clamps, Has full runaround system - fully hydraulic, 5 strand pop up transfer w/ Rolls and belt - 7'x7', 4x6" rolls w/ 10" spacing, 6"x7' belt conveyor, air cylinder for pop up
Belt conveyor - 6"x10', Hydraulic drive
5 strand pop-up Transfer w/ rolls - Laser lights, Hydraulic drive, 4x6" rolls w/ 10" spacing, 7'x7'
 

325
Electric Motor
5 HP, 3 phase, Dayton electric motor, 3455 RPM, 208, 230/460, works

700
Brewco Single Head Resaw
Model BSBH12, serial # SB1E4148, 9 1/2 '' wide belt, single head, 1 1/2" bands, 28" band wheels, hydraulic drive, condition unknown

326
Air Compressor
Speedaire 1 HP 1 phase Air Compressor with air hose reel

701
Belt Conveyor
48'' x 11' wide belt conveyor, no drive, with adjustable legs

327
Fan
30'' Patton fan, Model 1010MP, 120V

702
Log Arch
Year 2022, 6' long, will handle up to 20'' log, 15'' air tire, hand operated, New condition!

328
Grizzly Dust Collector
2 HP, 1 phase, SN 8866640, 16'' drum

703
Log Arch
Year 2022, 9' long, up to 25'' log, 16'' air tire, with winch and hitch, New condition!

329
Tool Box
2 tool chest on cart, 19 x 52 x 36 with tools

704
Log Arch
Year 2022, 9' long up to 25'' log, 20'' wheel, with winch and hitch, 2000 lb. capacity NEW condition.

500

705
Edger*
30'' Meadows Edger, 2-16'' blades, 1 movable, 7' infeed, 7' 6'' outfeed, working condition

705A
Meadows Edger
Meadows Edger 48" wide 3 16" blades 1 movable 6' 6" infeed 8' outfeed Line ready

706
Saw Grinder Wrench*
BDFS saw wrench and hand saw grinder

707
Blower*
Twin City  37'' x 10'' drum,8'' paddles, 15'' inlet, 12'' outlet, size 915, SN 15-5381231-1, Tag # EF-1 Booster fan, line shaft ready, good condition 

708
Lumber Sled*
48 x 92 x 18'' steel lumber sled, good condition

709
Steel Lumber Sled
48 x 92 x 18'' steel lumber sled, good condition

710
Hydraulic Cylinders
2-49" 3-46" 1-54" 1-65" 2-58" Used but look to be in good condition.

711
Line Shaft and Pulleys
2 Line shafts 1 11' 10" frame with 1131/2" 1 1/2" dia. Line shaft w/pulleys
80" Frame with 86" 1 7/8" Dia. Line shaft w/ Pulleys.

712
Drilling Machine
Hyd. Drive 2 Head Drilling Machine Used for coal mining Roof boards. See sample Working cond.

713
Up cut saw
27.5" Extra blade  Line shaft setup air cylinder 58" table w/ 4 stops.

714
Roll Case
12' x 24" 37" h.  w/ 4 1/2" x 16" HD Rolls gear chain Drive w/ air clamp.

715
Unscrambler
3 strand 108" x 77" x 53" Line raedy Good Cond.

716
Blower
6" blower in good Cond. Line ready

717
Welding Table
30x 90x 32 Welding table.

747
Hyd. Pump and tank
Pabco Hyd. tank and pump 26 x 38 x 20 on frame W/ Vickers 2620v0 K880 Pump and hoses w/ valves Line ready, Good Unit

748
Hyd. cooling Unit
12 volt Fan-Radiator for Hyd. unit

749
Perkins Power Unit
80 HP Diesel 3150 original hrs w/clutch 2 1/4" shaft, and radiator MD 1239/1700  S/N LD70263 U8693630 Good working Unit

750
Detroit Diesel
Detroit diesel, 4 cylinder with Rockford clutch, 2 1/4'' shaft, hours unknown, runs good

751
Kohler Generator
MN 10RCT63-64131C, SN 285735, 1 phase, 10KW, 10KVA 120/240, 41.7 amp diesel generator, Waukesha MN 180DLC, SN 122524, 3034 hours, condition unknown

752
Pow R Quip 240 Welder/Generator
New! .33 hours showing with remote start, 14 HP Kohler motor, no leads

753
Perkins Power Unit
3 cylinder, power unit came off of welder, does not run, condition unknown

754
I Suzu Power Unit
Diesel, no clutch, 3 cylinder, condition unknown

755
Perkins Power Unit
#TU33421U849980W, no clutch, 6 cylinder diesel, 8,621 hours showing and 31,378, ran when taken off of sawmill 3 years ago

756
Diesel Power Unit
Lister #725, 45 HP, SN HR3A3DM-07, 1,759 hours since rebuilt with twin disc clutch, 1 3/4'' shaft, 3 groove pulley, with hand crank, in good working condition. Reason for selling is unit is too big.

757
Gas Motor
1999 Ford gas motor, Model VSG413I6005A, 785 hours, SN 11570-1-07-99, with hydraulic pump, approx. 35 HP, runs good, came out of sweeper

758
Generator
9500 Prolite 519 hrs gas Industrial, Works Good Like new condition. 419 cc motor.

759
J/D Power Unit
 John Deere MD 4024TF270 # PE 4024t011511 Has turbo and radiator No starter condition unknown.

760
Lister Gen-Set
Serial # US1774ST3A29, 30 HP, 2600 RPM, 12 KW generator, 120 or 240 volts, 3 cylinder, on steel frame, works good

761
2019 Deutz
MN TD2.9L4, 49 HP, 2200 RPM, code # C4DI336EU, SN 12440182, looks to be in new condition

762
Power unit mount
Power unit mount w/ 2 1/8x16' Lineshaft 15'x5' Frame 6"x6" Frame

763
Cummins Power Unit
MN 3920701, approx. 250 hp, 5768 hours, year 1992, 8.3 Cummins turbo, runs welland is in good condition

764
Power Unit*
Kubota diesel, MN V1505ET16, 105 hours on new clutch, approx.30 hp, came off of Lot # 705 VERY GOOD UNIT

765
Generator*
New! Powerhouse 4500I224CC gas motor, MN 83171, SN 042/0041, 1 phase, 120/240 V, 30.8/15.4 amp, 60HZ, Brand new!

766
Hydraulic Unit*
Georgetown hydraulic unit with Honda GX690 motor, electric start, on running gear with quick connect hose, Like new condition!

767
Hydraulic Tank*
16'' x 16'' x 29'' hydraulic tank with Prince 2000 hydraulic motor, MN SP25A27A9H2-R, in good condition

770
Power Unit
2019 Deutz diesel, MN TD2.9L4, SN 12418725, 49 hp, 2200 RPM, 1 broken fan blade Almost New Condition

771
Power Unit
2019 Deutz diesel, MN TD2.9L4, SN 12418725, 49 hp, 2200 RPM, no fan blades or dipstick Almost New Condition

772
Power Unit
2019 Deutz diesel, MN TD2.9L4, SN 12433331, 49 hp, 2200 RPM, no fan blades or dipstick Almost New Condition

773
Power Unit
49 hp, SN 12369205, has broken water pump, selling as is Almost New Condition

774
Power Unit
MN TD2.9L4, SN 12115241, 72 hp, year 2017, Deutz diesel, almost new, condition unknown

775
Power Unit
MN D2.9L4, SN 12085035, 40 hp, year 2017, Deutz diesel, almost new, condition unknown

776
Power Unit
MN TD2.9L4, SN 11454725, 72 hp, Deutz diesel, almost new, condition unknown

777
Power Unit
MN TD2.9L4, SN 12467328, 49 hp, year 2019, Deutz diesel, almost new, condition unknown

778
Power Unit
GMC 150 HP V6 Diesel with right angle Clutch, on 2 wheel gear. Running condition. Battery not included.

798
Dump Hopper
3' x 5' x 31 Hopper (blue)

799
Grey Metal Hopper*
on wheels, 29'' x 48'' x 30''

799A
Shenniu Diesel Tractor
1997 Model 295T3F1 Runs and drives PTO works, Needs new Brakes and tune up.

800
Kioti Tractor
Kioti SL2410 Tractor with loader, showing 213 hours, SN NY5600263, year 2020, like new condition

801
Land Pride Brush Hog
MN RCR1248, like new condition

802
Rototiller
Kioti HCA475CS, SN PRA100016, rototiller 47'' wide, like new condition

803
International 660D Tractor
6 cylinder diesel engine 
has new battery
5 speed  
Runs good 
Drives but needs Torque Amplifier repaired
Tire tread low
S/N1857S-Y 

804
Farmall Model A
SN FAA1106070, rear belt pulley, PTO, 50% rubber on tires, 6V, restored, runs good

805
Farmall Model M
SN 173787X1

806
Ford Tractor
800, 4 cylinder gas, 70% rubber on tires, meter reads 533 hours, 5 speed, 3 point, good running condition

807
Diesel Kubota
B 7100, 4 wheel drive, 6 speed, 3 cylinder diesel, 541 hr. showing, PTO, 3 point. hitch, 50% rubber and a little dry rot, works good

808
Kubota Tractor
M4700, meter reads 4,345 hours, rear turf tires, 1 like new and 1 at 40%, rear 4 port hydraulic, PTO, good condition

809
Massy Harris
44 special Model 44 GIRF, SN 59952, Runs good, No pulley, PTO, 3 point. hitch, fender needs new oil case seal, 20% rubber, New battery

810
John Deere MC Crawler
1949 MC Crawler Older restoration New final drive 12" steel tracks 12 volt system s/n 10665 belt pulley and PTO work. Runs Good, Totally rebuilt from the Ground up New Steering Clutches and all. Nice Machine

811
John Deere Loader
John Deere 1020W, 48 loader, PTO, hydraulic, partial 3 point, tires are at 50%, 13.6-28 tires, repainted, 60'', has power steering and runs good. 3PTH works.

812
John Deere B Tractor
1941 Model B New Rubber Tires  Hand Start Runs good S/N 110597

813
John Deere 60 Tractor
1952 John Deere 60 New Battery Runs but engine is weak.  Ran when parked 2 years ago. S/N 6003767

814
John Deere LA Tractor
Like new rubber! John Deere Engine Runs Good, No S# tag, Has manual Rebuilt Starter Runs Good

815
John Deere M
1949 has PTO, Belt Pulley, 60% rubber, some dry rot, runs good, 2 point hitch fenders S/N 26479.

816
John Deere M
1949 M repainted, runs good, has PTO, 12V with new alternator, Like new rubber with dry rot S/N 33620

817
John Deere MT
1950 MT 80% rubber, 6V, 2 point hitch, Belt Pulley, PTO, Runs good, fenders S/N 17052

818
John Deere BR
1942 BR Hand start, Like new rubber, Has PTO, straight pipe, Runs good, fenders S/N 332648

819
John Deere AR
unstyled1936 AR , 90% rubber with dry rot on tires, hand start, runs good S/N 251502

820
John Deere D
hand start, 40% rubber on tires, PTO, belt pulley, works good

821
John Deere AN
1947 AN Hand start, runs good, 50% dry rot rubber, single front wheel, PTO, 2 point hitch, NO SN # plate

822
1948 John Deere BNH Tractor
1948 Serial # 229230 JD BNH with Rock box has PTO, Belt Pulley Single front Wheel, 40% Rubber, Left rear tire has very small air leak. 

2000

823
JD 40
1953 John Deere 40 , 2pt hitch, PTO, has 12V Battery but charger is not working, 60% rubber, runs good S/N 62665

824
John Deere 420W
1956 John Deere 420W Nice solid original condition, runs, tires at 60% with dry rot, 3 point hitch, PTO, fenders, 6V New Battery.S/N 88512

825
John Deere GM
1943 John Deere GM hand start, 80% rubber with some dry rot on front tire, has fenders, PTO, runs good, original gauges S/N 13695

826
John Deere D
1949 electric start, steel wheel with rubber, PTO, SN 184371, lights work, alternator is not working, runs OK

827
John Deere 620
 1958 SN 6216786, power steering, PTO does not work, 3 point works, belt pulley, runs good, like new rubber with dry rot, rear exhaust

828
1957 John Deere 620
1957 SN 6206873, as is, condition unknown, original condition

829
John Deere A Tractor
1950 JD Model A s/n 663337 50% dry rot rubber, Elec. Start, Runs & Drives needs tune up.

830
1949 John Deere A
1949 SN 614900, original condition, condition unknown AS IS

831
1/2 Scale John Deere Model D
on steel wheels, 56 wide x 87 long x 48 high, MN 141-589022, Kohler motor, Runs and operates good. 1 of 3 that are made. 4 speed

832
JD 4240
4240 JP-X about 1/3 scale Tractor, 1065 hr showing, Has Kohler Model M12426 Engine 50%, rubber 38" wide x 70" long x 42" High, Runs Good

833
John Deere 320-S Tractor
1957 SN 320465, MN 320-S, 2 cylinder, gas, like new rubber, 3 point hitch,draw bar, restored condition, runs well

834
John Deere B Tractor
1 new rear wheel, others about at 50%, complete, no SN # plate, not running, rebored block piston

835
John Deere 4 Cylinder Continennel Gas Motor
electric or hand start with clutch, runs

836
Ford LGT 148
Hydrostatic with 60'' deck, lights and mower work good, 14 HP new meter showing 26 hours, rubber on tires is 60%

837
Ford LGT 120
4 speed, 12 HP, runs but smokes little, rubber on tires is 40%

838
Bolens Garden Tractor
MN 750, with mower, snowblower, snow plow, and rototiller. Runs and works well and is in good condition.

839
2002 John Deere 6403 Tractor
Approximately 8400 HRS, 2x4, 85 hp, 50% rubber, Diesel Engine, 3 point hitch and PTO, Dual auxiliary hydraulic hookup, 3 speed w/ high,medium, and low gear, Roll bar, 4 way lights w/ trailer hookup.

840
Lumber Carts
4 carts, 36 x 60 x14'' Ready to be made into a train behind your tractor.

841
John Deere Tractor*
John Deere 1950 A, 2 cylinder, gas, tractor restored, electric start, PTO works, on full steel wheel, SN 660555, good running condition

842
Tractor
MN 4020, SN 14141955, 20 hp, 444 hours, Ingersoll hydraulic drive tractor, Onan gas 8:00-16, 6 bolt tires, 80% dry rot rubber with chains

843
Tractor
MN 4016, SN 14128867, 16 hp, 1725 hours, Ingersoll hydraulic drive, Onan gas 8:00-16, 6 bolt tires, 40% dry rot rubber with back blade and scraper blade, 1 port hydraulic

844
Log Splitter
24'' hydraulic drive log splitter on 14'' wheels

845
Snowblower & Snow Plow
48'' snowblower at 52'' x 20 snow plow, will fit Lot # 842 or 843

846
Ford Tractor
Ford  diesel tractor, as is, not running, rough condition

847
New Holland Tractor
MN TC33D, 40 HP SN G037465, 2637 hours, with 7308 loader with 60'' bucket, 70% rubber, canopy, 3 point hitch, PTO, 4 x 4, missing key, runs well and is in good condition

848
Ford Tractor
MN 2000, 236 hours, gas, 4 cylinder, 80% rear rubber, 1-front 70%, left front bald, power steering, 3 point hitch, PTO, drawbar, brakes need adjusted, runs well and is in good condition

849
Silver King Tractor
Silver King 4 cylinder gas tractor, motor # F7162312, SN 6211, not running and no battery, condition unknown

849A
Ferguson Tractor
Runs and Drives was driven to the Auction Site. It does need a new Starter. The starter on it is not working right.

850
New Holland Hay Elevator
16' Skeleton Hay elevator Model 132 s/n 539712 working condition.

850A
Implement Seats
Pallet of 10 Implement seats. Rusty

851
2 Bottom Case Plow
Case breakaway 2 bottom plow 3PTH.

851A
Plow
Single bottom plow for John Deere L or LA

852
Cultivator
spring tooth and cultivator for John Deere L or LA

853
Square Green Grist Mill
Belt powered Grist Mill.

854
Nordyke @ Marmon Co 20'' Grist Mill
Belt powered Grist mill.

855
Ohio # 13 Rare Cutting Box
with 8'' x 17 1/2'' wooden web, in good working condition, very nice piece, hard to find, 11' long x 43 x 45 Belt powered.

856
Buckeye Tractor Single Chisel Plow Attachment
New! MN 3090, SN 5372909, 3 point hitch

857
5' Wood Cadet Co Brush Hog
80'' long, 1 rust hole on top, working condition

858
3 Point Hitch Plow
2 bottom, good condition

859
Snow Blower
3 point hitch snow blower, good condition

860
Brush Hog
MN 5-4, SN 0053602, 60'' woods Dixie cutter, 3 point hitch, good condition

861
Finish Mower
MN MORO7200-2, SN 986057, woods RD7200 finish mower, 72'', 3 point hitch, good condition

862
Flail Mower
MN 917H, SN K420879, Ford 92'' flail mower, 3 point hitch, good condition

863
Rototiller
60" Rotomec Rototiller

864
Plow
14'' John Deere 2 bottom plow, 3 point hitch, good condition

865
Double Disc
John Deere 64'' double disc, 3 point hitch, good condition

866
Gravity Box
MN 181, SN 2093, New Holland, 6' x10' x 4', good condition

867
Wheel Weights and Chain Falls
2 Wheel weights off of Inter. 6 series 24" outside dia., 2 wheel weight off of Cockshut 21.5" Dia. and Yale Chain Falls.

900
2012 Dodge Grand Caravan Van
Mileage: 135,289
Body Type: 4 Door Van; Extended
Trim Level: SE
Drive Line: FWD
Engine Type: V6, 3.6L; FFV; DOHC
Fuel Type: Gasoline/E85
VIN #: 2C4RDGBG1CR349550

Features and Notes:

901
Ford 2015 Transit 350 IT. Van
189,700 miles, V6 motor, vinyl seat, power window, 15 passenger, 70% rubber on tires, very clean, front and rear air tow package, no rust, Florida van

902
1999 GMC Suburban 1500
8 passenger, 209,152 miles, 50% rubber on tires, runs and drives but selling as is, has some rust, 4 wheel drive works, tow package 5.7 ,Has a crack in the frame (left rear)

961

903
2002 Sterling L7500 Series Truck
Mileage:59,081
Drive Line: 6x4
Engine Type: L6, 7.2L (439 CID)
Fuel Type: Diesel
VIN #: 2FZHATAK12AJ53210

Features and Notes: Automatic 3126 Cat and Cummins B 3.9-130 on vac pump, 4,351 hours, 5,285 engine hours

904A
1994 Ford Flatbed
Ford 9000, VIN R900VEA7233, 400 big CAM Cummins diesel, 75% rubber on tires, CDL air brakes, 17' 6'' x 90'' x 14 bed tail gate, set of 4 like new dry rot wheels, 401,8544 miles, 3553 hours, 5 speed manual, has some rust, runs good

905
1997 International 4900
6 Speed Auto DT530 Allison Trans Dump truck with Stainless steel salt spreader 28,200 org miles. Runs and drives.

906
2002 Ford 350 Powerstroke
MN F350, SN 1FTSX31F62ED557, 700 hp, year 2002, 7.3 diesel, extension cab, dually Powerstroke Turbo Built Transfer towing, air suspension on back, 70% rubber, fifth wheel, gooseneck, bumper hitch, cloth interior, no rust, 206,581 miles, is in good running condition!

907
Truck Tarp
8' x 48 truck tarp and sides, complete with no holes

908
Chevy C3500
1999 Chevy C3500 310,000 miles runs and drives. 5.7 V8 Auto according to mechanic well maintained, 8' bed has some rust towpackage and brake controller 80% left on rubber. Cracked windshield. VIN 1GCGC34R8X706400  Color White.

909
2012 Nissan Rogue
2012 Nissan/ Rogue 4 wheel drive 137,457 miles. Runs and drives, trans. has a slight hesitation, Cloth interior. VIN JN8S5MV5CW710115, Color K51 Trim K 80% rubber 4 cyl. automatic Power windows, has crack in windshield. 

950
Equipment Trailer
MN FIT 3-35 BT VIN 13N 84022-S-N1553844 YEAR 1992 FONTAINE 8' x 27' 9', 2' dovetail no ramps, Dual Tandem 7 tires 80% 1 50% 11' long tongue 6"x18 1/2" x 3/4" thick main frame, Cross members have some rust, tows great all lights work. Trailer will need some work.

951
Tilt Trailer
2018 22' MAXXD 16' tilt trailer, 6' flat, 83" wide between the fenders Needs New Axles, Brakes & Tires everything else is in excellent condition.

952
Jayco Eagle Camper
SN 1UJCJ02P351LF0286, 5th wheel camper, year 2005, Jayco 30' wide x 3' x 13' slide out, 6' x 20' awning, new battery, electric jacks,  roof AC, self contain water, sleeps 6, 90% rubber, loaded with fridge, freezer, microwave, stove, shower, toilet and sink. Very clean and in very good condition!

953
Gooseneck Trailer
2003 Mortiz Gooseneck 15'19" flat 5' dovetail, No Ramps, has rust, double axle, Lights & brakes need some work, 70% rubber

954
Trailer
Mid Atlantic 80" x 16' w/ 3 ramps, 2-7000 lb. axles, New jack, May need new tires, Rusty fenders, No title

955
Trailer
NOPCO Pintle Hitch dbl. axle Like new wheels 83"x16' deck 2 Ramps, 16x55 Brake Controls, No title, Was used w/ Lot #553

956
Trailer
81" x 11'4" with a 30" dovetail plus ramps

957
2014
5' x 10', 16'' sides, new spare tire, tartar, VIN 51GBUXEL012907, with ramp gate, excellent condition

958
Gooseneck Trailer
2018 Iron Bull  Gooseneck Trailer 22' flat 6' dovetail.

959
Trailer*
5' x 10' x 34'', homemade trailer with canvas rooftop, 4.80-12 spare tire, wood floor, 38 x 62 ramp gate

960
Trailer
77"x16' Home made trailer, fair condition, 45" tongue 12 volt 4500 lbs  winch, Brake away 1 tire no good rest 40% fenders some rust.

961
PJ Tilt Trailer
20' PJ Tilt Trailer

962
Landscaping Trailer
12' Landscaping Trailer

988
48" Quick Attach Forks
48" Quick Attach Forks

989
60" Quick Attach Bucket
Used 60" Quick Attach Bucket

990
ES HD Dump Hopper
3 YD Hopper Constructed in the U.S.A. with quality American steel, 1/4” steel base, 7 gauge steel sides,
3” Fork Opening, Strong, easy-to-operate latch, Safety Chain included to wrap around the mast of the forklift to prevent the hopper from coming off the forks, Fully welded seams, Overall Approx. Dimensions:  70.5″ Long x 57.75″ Wide x 55″ Tall, 3 cubic yard volume, 6,000 lb. capacity, Weight:  960 lbs. , Painted gray

991
ES Dump Hopper
2 1/2 YD Hopper  Constructed in the U.S.A. with quality American steel, 3/16” steel base, 10 gauge steel sides, 3” Fork Opening, Strong, easy-to-operate latch, Safety Chain included to wrap around the mast of the forklift to prevent the Hopper from coming off the forks, Fully welded seams, Overall Approx. Dimensions:  64″ Long x 69-3/4″ Wide x 46″ Tall, 2-1/2 cubic yard volume, 4,000 lb capacity, Weight:  700 lbs, Painted gray

992
Dump Hopper
2 YD Hopper 
  • 4,000lb. capacity
  • 619lb.
  • 3″ fork opening
  • 7 gauge sides
  • 7 gauge steel base
  • 68″ L x 57.75″ W x 46″ H
  • 28.5″ x 3″ fork pocket
  • Lip to ground 33″

993
Bale spear
Round bale spear. Weight145 lbs
Spear & Stabilizers49″ spear & 18″ stabilizers
Capacity3,000 lbs
Frame46″ x 6″ x 19″

994
Bale Spear
Square bale spear Weight185 lbs
Dimensions57 × 19 × 6 in Spears 3 – 49" Spears
Capacity 3,000 lbs
Frame 46" x 6" x 19" 3 square 1/4" wall frame

995
ES 72" Brush Cutter
BRAND NEW Open front face design
2” drive shaft
3 hardened steel blades- 5″ x 1/2″
Grease filled drive, with greaseable zerk fittings
160 cc motor for machines 15-26 GPM
Steel runners on each side for ease of use over multiple terrains
Comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers
Weight: 1350 lbs.

996
Snow Pusher
Brand New 6' XP, 30+HP 77x34x31, 4cu.yd 620lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

997
Snow Pusher
Brand New 7' XP30 35 +HP 89x34x31 5 cu. yd 655 lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

998A
Snow Pusher
Brand New 8' XP30 Pullback, 40+ HP, 101"x34"x31" 6 cu yard 820 lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

999
Snow Pusher
Brand New 10' XP30 60 + hp, 125" x 34" x 31" 8cu yd 775lbs, 3/16" moldboard 3" channels, 36" x 36" 3/8" sides, 1" x 5" bolt on shoes, 1 1/2" x 8" 2600psi rubber- its adjustable & reversible (3"slots, on 12" center main edge.12" XP36 & PB - 4" channel, vertical back bracing, 3/4" 5" bolt on shoes.

1000
Reliable Driveway Grader
Brand New Quick attach for skid steer 86" W 72" L  22" H

1001
Reliable Driveway Grader
Pull behind 48" x 46" x 6"

1002
Forks
4'' x 48'', stout USA made, used condition

1003
Brush Grapple
66'' Brush Grapple Tomahawk brand, 1 hydraulic cylinder, used condition

1004
Koyker Post Pounder
SN K682758133216, year 2011, in good working condition

1005
Sawdust Bucket
8' wide, 45'' deep, 35 high sawdust bucket with fork pockets

1006
Brush Grapple
72" used Cat double cylinder Brush Grapple

1007
Land Pride Rake
MN LR1596, 3 point rake, 8' wide, in good condition

1008
John Deere 65
7' 3 point blade, 17'' high with caster wheel

1009
Platform
48 x 44 x 4'', 3 point

1010
Slip Scoop
30 x 32 x 12, 3 point

1011
Ford Sickle Bar Mower
3 point, 6' sickle bar mower, SN 36769

1012
Boomlift
3 point, 7' long

1013
Set of 2 Steel Tracks
9'' wide x 11' 6'' used.

1014
Hydraulic Bucket with Fork Pockets*
48'' x 30'' x 26''

1015
HD Ripper*
74'' , 36'', 3/4" Dia. teeth with quick attach plate used

1016
2 Tires*
2-9 lug, 13.50-16.1 tires, 40% tread

1017
John Deere Blade*
7' x 16'', 3 point blade

1018
ES Skid Steer Bucket
New! 96'' snow/mulch bucket Steel Cutting Edge1/2″ x 6″
Bucket Specs11 gauge bucket with 3/8″ reinforcement on sides and 1/2″ reinforcement on bottom
38″ deep
27″ tall, 1.28 cubic yards

1019
ES Skid Steer Bucket
New! 78'' snow/mulch bucket, Steel Cutting Edge1/2″ x 6″
Bucket Specs11 gauge bucket with 3/8″ reinforcement on sides and 1/2″ reinforcement on bottom
38″ deep
27″ tall, 1 cubic yards

1020
ES Skid Steer Bucket
New! 72'' bucket with bolt on edge, Weight715 lbs
Dimensions34.75 x 72 x 20-5/16
Steel Cutting Edge1″ x 8″ welded on cutting edge
5/8″ bolt on cutting edge
Bucket Specs1/4″ thick sides, 1/2″ thick bottom. 1/4″ thick back with 1/4″ thick reinforcement plate at quick attach
Capacity.63 cubic yards

1021
ES Skid Steer Bucket
New! 60'' snow/mulch bucket, Weight360 lbs
Dimensions60 × 38 × 27 in
Steel Cutting Edge3/4″ x 6″
Bucket Specs3/16″ sides and bottom with wear bars for reinforcement. 1/2″ wear bars
Capacity.8 cubic yards

1022
ES Skid Steer Grapple
New! 72'' rock grapple 3/8″ teeth and sides, 72″ x 34″ x 19″, 3″ square tube frame,1 cylinder grapple with 3000 PSI hoses, 1/2″ flat faced quick connect couplers

1023
Skid Steer Grapple
New! solid bottom, 66'' rock grapple, Comes with hoses, fittings and couplers, Dual Hydraulic Cylinders with covers, Includes 1/2″ flat faced quick connect couplers that fits almost any skid steer hydraulic system, 2″ x 8″ AG cylinders, Independent grapple tines – makes uneven loads easier to grapple, Universal Quick Attach mount, 8.5″-9″ spacing between tines, Recommended for compact tractors and machines with 40 hp or les

Our grapples are powder coated black for long lasting performance.


1024
Skid Steer Grapple
New! 72'' double grapple, 1/2″ steel tines, Independent grapple tines – makes uneven loads easier to grapple, Dual Hydraulic Cylinders with covers, Includes 1/2″ flat faced quick connect couplers that fits almost any skid steer hydraulic system, Universal Quick Attach mount, 2″ x 8″ AG cylinders, Comes with hoses, fittings, and couplers., 8.5″-9″ spacing between tines Weight505 lbs.
Dimensions72 × 36 × 28 in
Steel Serrated Tines1/2″
Open Height32″ Front and 37″ Center
Closed Height17″

1025
John Deere Hook Up Bucket
60'', 400/500, Weight345 lbs
Dimensions60 × 30 × 27 in
Steel Cutting Edge, 3/4" x 6"
, Bucket Specs, 3⁄16” thick sides 3⁄16” thick bottom with wear bars for reinforcement
, Capacity .4 cubic yards

1026
Skid Steer Forks
New! 42'' Dingo fork attachment

1027
Skid Steer Forks
New Dingo 48" forks

1028
ES Skid Steer Forks
New  HD 48" skid steer Forks 6,600 lb. lift capacity 

1029
ES Skid Steer Forks
New ES Walk Thru 48" Forks 4,000 lb lift capacity

1030
ES Skid Steer Forks
New ES Standard 48" Forks 4,000 lb lift capacity

1031
Quick Attach Hitch Plate
New Quick Attach Hitch Plate 

1/4″ thick plate

Works with 2″ receiver


1032
80" Grapple
80" grapple Lite duty 1/4" plate 

1036
Snow Plow*
 11' 6'' blade, 38'' high-50'' high, good condition

1037
Sweeper*
80'' sweeper, hydraulic drive on front of truck mount, good condition

1038
Gravel Tray*
36'' x 94'' x 12'' steel gravel tray for back of truck, good condition

1039
Ditch Brush Mower*
MN RB215B, SN 12228,VMC 3 point hitch with controls, 48'' wide, good condition

1039A
Ditch Cleaner
MN BS52Y, SN 750801901, 12'' hydraulic drive

1039B
Tamper*
2.3 hp, Wacker gas powered, weight 117 lbs. 

1039C
Gravel Spreader
8' tailgate gravel spreader, hydraulic drive

1039D
Gravel Spreader
8' tailgate gravel spreader, hydraulic drive

1039E
Fork Extension
fork extension 5 1/2'' x 2 1/4'' x 10', 6600 lb. capacity

1040
New Skid Steer Trencher Attachment
Approximately 4' long arm, auger side discharge, new in crate, Call Bronson 574-210-3721

1041
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'' new in crate, Call Bronson 574-210-3721

1042
New Skid Steer Auger Attachment
With 3 bits, 19'', 14'' and 11'' new in crate, Call Bronson 574-210-3721

1043
New Skid Steer Rock Grapple Bucket
New 72" Rock Grapple Bucket. Call Bronson 574-210-3721

1044
New Skid Steer Rock Grapple Bucket
New 72" Rock Grapple Bucket. Call Bronson 574-210-3721

1045
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1046
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1047
New Skid Steer Heavy Grass Fork Grapple
76" wide, 8 tooth, 2 cylinder, new in crate. Call Bronson 574-210-3721

1048
New Skid Steer Snow Plow Attachment
86'' wide. Call Bronson 574-210-3721

1049
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate, Call Bronson 574-210-3721

1050
New Skid Steer Rotary Cultivator Attachment
9 tines, 72'' wide working width, new in crate, Call Bronson 574-210-3721

1051
New Skid Steer Vibratory Roller Attachment
72" wide, not for high flow hydraulics

1052
New Greatbear Skid Steer Brush Mower
66'' wide cut, quick attach. 

1053
Fork Extension
2 1/4 x 5 3/4 x 7' fork extension

1054
Fork Extension
2 1/4 x 5 3/4 x 7' fork extension

1055
Fork Extension
2 1/4 x 5 3/4 x 66'' fork extension

1056
Fork Extension
2 1/4 x 5 3/4 x 66'' fork extension

1057
Weld on Plate
weld on quick attach plate

1058
Weld on Plate
weld on quick attach plate

1059
Weld on Plate
weld on quick attach plate

1060
Weld on Plate
weld on quick attach plate

1061
Weld on Plate
weld on quick attach plate

1062
Weld on Plate
weld on quick attach plate

1063
Weld on Plate
weld on quick attach plate

1064
Weld on Plate
weld on quick attach plate

1065
Grapple
66''

1066
Grapple
74''

1067
Grapple
79''

1068
Grapple
84''

1069
Hitch Plate
quick attach hitch plate

1070
Hitch Plate
quick attach hitch plate

1071
Hitch Plate
quick attach plate

1072
Hitch Plate
quick attach plate

10000