2000

Information Lot - 2 DAY AUCTION
2 Day July Virtual consignment auction. July 14 and 15 starting at 9 AM both days. Lots 1000-2000 will be selling on July 14. Lots 2000 and up will be selling on July 15. Please note locations and agent contact info  in each lot. Buyers have 14 days to remove equipment unless noted otherwise in description. Rigging is generally available on installed equipment. Rigging is an additional expense to buyer unless noted otherwise.

2100

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box. Shipping available for $30

2101

Heavy Equipment Key Set 22 Keys
Shipping available for $20

2102

Makita Gas Chain Saw
MN EA-6100, only 2 years old, runs very good. Located at: N 15449 County HWY 0, Thorp, WI 54771. Call Eugene with any questions at 260-350-8953.

2103

Makita Gas Chain Saw
MN EA-6100, only 2 years old, runs very good. Located at: N 15449 County HWY 0, Thorp, WI 54771. Call Eugene with any questions at 260-350-8953.

2104

Yanmar Diesel Engine
Unit has a new main bearing, new piston bearings, and a new crank. 1 1/2'' shaft, Came off of a Timber Harvester Mill (switched to electric) approx. 3300 hrs. very good condition. Located at: N 15449 County HWY 0, Thorp, WI 54771. Call Eugene with any questions at 260-350-8953.

2200

Clark Forklift
Meter reads 3468 hours, 5"x48" forks, 38"x72" tall mast, Model-C500-50, SN-355-1493-2541, 5000 lb capacity, LP powered, Pneumatic tires. Located at 3161 Franklin Pike, Cochranton, PA 16314. Call Eugene with any questions at 260-350-8953.

2201

Yale Forklift
SN-A875B26747B, Diesel powered, Pneumatic tires, Meter reads 1657 hours, 3 stage mast, 5"x48" forks, 42"x88" tall mast. Located at 1587 Wheat Ridge RD West Union OH 45693. Call Eugene with any questions at 260-350-8953.

2202

2203

Cat Forklift
Cat Forklift, Propane power, 60" Forks, Solid Tires, Starter will be replaced.
Location: 8871 Townsendville Road Interlacken, NY 14847
Contact: Steve (570) 460-0286

2204

Hyster Forklift
Model H30FT, serial # F001V03189F, 3000 lb. lift, 81" lift height, no side shift, meter reads 20,530, includes propane tank, runs and operates good, has small coolant leak. Located at: 274 W 1100 S. Milroy, IN 46156. Call Eugene with any questions at 260-350-8953.

2205

Forks for Forklift
5" x 40". Located at: 274 W 1100 S. Milroy, IN 46156. Call Eugene with any questions at 260-350-8953.

2206

Forks for Forklift
4" x 40" long. Located at: 274 W 1100 S. Milroy, IN 46156. Call Eugene with any questions at 260-350-8953.

2250

Cat 926 Wheel Loader
PIN 94Z02091, meter reads 20,772 hours, includes 64" Rockwell forks, no brakes except for parking brakes, steering is a bit sluggish but otherwise a clean good working loader. Located at 502 Spring Creek Rd. Cullen, VA 23934. Call Jonathon 574.349.4380

2251

Volvo Michigan L50B Wheel Loader
PIN-XL50BP9287X, Will be on regular air tires and have all glass in cab by day of auction, Perkins diesel engine, No 3rd valve, Meter reads 7934 hours, Does not include any attachments, Starts right up and runs good. Located at 673 Mcatee Rd. Cadiz, KY, 42211. Call Eugene with any questions at 260-350-8953. 

2252

577 IMT Massey Ferguson Tractor
First lot of an entirety. 4 wheel drive, 70 HP, 540 PTO, has dual rear remotes, good heavy duty tractor that is currently working in the hay field. Only reason for selling is they are looking for one with a cab. Located at: 1725 S Dixie HWY Munfordville KY Contact Eugene 260.350.8953 

2252A

Bush Hog 2840QT front end loader
Has 48'' heavy duty forks, fits the 577 Massey tractor. Located at: 1725 S Dixie HWY Munfordville KY Contact Eugene 260.350.8953

2252B

Entirety Lot
Includes lots 2252 & 2252A  with a 10% raise. 

2253

255 Leyland Diesel Tractor
Has dual remote hydraulics, 3 point, tractor runs great!  Located in Bonnyville KY Contact Eugene at 260.350.8953

https://youtube.com/shorts/RDPxNMhEK1s?feature=share

2254

2030 John Deere Tractor
Diesel, 68 HP, 540 PTO, runs & operates, Located in Bonnyville KY Contact Eugene 260.350.8953. see video link below

https://youtube.com/shorts/-B6WAVs2k_8?feature=share

2255

Backhoe Attachment
3 Point tractor backhoe attachment ARPS 732P located at: 1725 S Dixie HWY Munfordville KY Contact Eugene 260.350.8953
 

2399

2016 Tigercat 610E Dual Arch Grapple Skidder
SN-6101189, Meter reads 3179 hours, Fully enclosed cab with Heat/AC, radio, air ride seat, digital display, and joystick controls, 90" blade, Cummins diesel engine, 11' max width grapple, turn around seat, two stage transmission, Tigercat winch with 1/2" cable in like new condition, tire size 30.5L x 32,26. Absolutely nothing wrong with this machine. In immaculate condition and ready to put to work. One owner! Located at 2195 Gabe Rd. Greensburg, KY 42743. Call Jonathon with any questions at 574-349-4380.

2400

2017 Dyna SC-15 Firewood Processor
34 hp CAT diesel engine, SN-181118, 759 original hours, 6'x90" 3-strand live in feed deck, Pulls with 2" ball hitch, Includes 4-way and 6-way splitting heads, 16"x14' cleated belt conveyor, 22"x16' log capacity, Extremely good machine, Everything works as it should. Located at 3856 Farm Rd. 2175 Exeter, MO 65647. Call Eugene with any questions at 260-350-8953.

2401

Chainsaw chain
40489 drive length, Fits bar on Dyna Firewood Processor. Located at 3856 Farm Rd. 2175 Exeter, MO 65647. Call Eugene with any questions at 260-350-8953.

2402

Cord King Firewood Processor
Location: 2016 Route 145, Middleburgh, NY 12122
Contact: Steve @ (570) 460-0286
 

2403

BALFOR Buzz Saw
Skid steer quick attach plate and Hydraulic hook up, 30" blade, 16"x7' in feed belt with 6" cleated belt. Located at 3161 Franklin Pike, Cochranton, PA 16314. Call Eugene with any questions at 260-350-8953.

2404

Hydro AX 611E Feller Buncher
Cummins 8.3 diesel with 1878 hours, True machine hours are unknown. 22" Hydro Ax cutting head, NO BLADE, Everything works as it should. Located at 706 PA-655, Allensville, PA 17002. Call Jonathon with any questions at 574-349-4380.

2405

Hydro Ax 411 EX Feller Buncher
Cummins diesel w/ Approximately 2000 hours, Engine SN-2LB024427, Meter reads 10,145 hours, Koehring cutting head,- Enclosed cab with Heat/AC and radio. Located at 706 PA-655, Allensville, PA 17002. Call Jonathon with any questions at 574-349-4380.

2406

Skidder Tire Chains
Came off John Deere 440 Skidder. Located at 706 PA-655, Allensville, PA 17002. Call Jonathon with any questions at 574-349-4380.

2440

2022 Woodpecker Junior Nailing Machine NEW!
NEW!  NEVER UNCRATED!  4 Run holder.  INCLUDES STACKER. Electronic nail gun firing system includes 2 unique firing devices. Ability to build top and bottom or top only wing pallets.  

Woodpecker Jr specs:
The Woodpecker Junior is an American made, highly efficient, single operator nailing machine. Many customers see the production of 500 or more pallets per day running the Woodpecker Junior with the available stacker.

Standard size:
* 50” L x 56'' W (maximum with 4 stringers)
* 24'' L x 26'' W (minimum with 3 stringers)

Maximum Pallet Size: 50" L x 56" W, 4-Stringer
Woodpecker Junior Stacker with Powered In feed and Discharge Conveyor, and 10’ Rollout Conveyor

Standard Features & Benefits Include:
* Steel Track, Rollers, and Heavy-Duty Channel Frame
* Variable Electric Drive, 480V or 240V
* Rear Pallet Push-Out to Optional Stacker
* 2 Firing Systems:
o Auto-Board Sensor Firing System w/ FPM Speed Meter
o Slot Sensor Firing System
* Top & Bottom Board Flushers
* Quick Clamps Included for Nail Guns and Jig Adjustment.
* Boards Hold Downs and Double Air Clamps
* Complete System Positive Lubrication System
* Quick Adjuster on Right Jig
* 4 - Nail Chutes
* 1 - Firing Rail w/ Pins & Hardware

Machine Requirements:
1" air supply line with a minimum of 60 gallons of storage/accumulation within 10 feet of machine. 7 HP air compressor or larger to produce 28 CFM of clean, dry air.
Located at 1605 W. Beargrass Road, Washington, NC  Call Zach 931-224-0699 with questions 

2441

Go Fast Chop Saw NEW! Never Uncrated
24" Blade, In feed-and Out feed. Tiger Stop Fast & Accurate indexing system. 

CS24 W/AIR CONTROL HEAD, AUTO CYCLE, 16' INFEED

CS24 - CS-24 CHOPSAW
- 24" Carbide Blade
- 6" x 10" Capacity
- 7' Outfeed Roller Case
- 4” Dust Connection
- Dimensions: 144” L, 60” W, 72” H
- Weight: 1,500 lbs

CS24-16' INFEED - 16' Push Plate Infeed
- 16" to 200" Capacity
- 6" Tall Back Fence
- Push Plate Mounted to Roller Chain
- Air Actuated Hold Over Plates

CS24-AIR_CONTROLLED_HEAD - Air Ram Controlled Head
- Solenoid Air Valve Controlled by Auto Cycle Panel
- Auto and Manual Control
- Will Require Customer Supplied Air Line

CS24-5HP_220/1/60_AUTO - Auto Cycle Controls Push Plate
- Features: Push Plate on the far right side of the infeed that will index from right to left
per presets entered into PLC.
- Operation: The user will enter a sequence of cuts into a screen mounted on the
machine. The auto cycle will push material into the saw and cycle the end cutting
action until all cuts have been cycled. Once cuts have completed the push plate will
return to its home position at the far-right side of the infeed. Operator will then repeat
the cut cycle.
- 220 Volt Control Panel Completely Wired
- (1) 5 HP Blade Motors (220/1/60 TEFC)
- 3/4 HP Infeed Conveyor Motor (220/1/60 TEFC)
- Infeed Conveyor Encoder
- Zero Limit Switch
- Pre-wired Motor Starters & Circuit Overload Protection
- Start/ Stop, Auto/ Man Buttons
- Touch Screen Operator Interface
- Service Disconnect Mounted on Panel Face
- Non UL Certified Panel (add $800 for UL Certification)
- UL Type 1,3R,4,12,13 Enclosure
- UL Type 4X, IP66 Rated Buttons

Located at 1605 W. Beargrass Road, Washington,NC 27889.  Contact Zach for more information. 931-224-0699

2449

2013 Baker BP Dominator Band Mill
SN-13-760, 42"x5'x8' tall cab w/ controls, Fully Hydraulic, No electrical controls, PLC system is complete to best of sellers knowledge and was never used, 3'x8' off bear belt, 24" log turner, 1 1/4"x36" band wheels, 2" bands, Iveco diesel engine w/ approximately 105 hp, 115"x31'x138" tall overall. Located at 673 Mcatee Rd. Cadiz, KY, 42211. Call Eugene with any questions at 260-350-8953.

2450

2017 Baker 3665D Band Mill
Model BBS-O3680D, serial # 17893, set up for 2" bands, 1 1/2" x 28" band wheels, 74 HP Deutz diesel engine, log turner, board drag back, live tow rollers, live off bearing rolls, fully hydraulic, no setworks, 36" x 20' log capacity, meter reads 2380 hours but has roughly 4950 total hours, includes closed center hydraulic pump and tank. Includes Cooks sharper and Cooks dual tooth setter and some new parts. NEW TRACK AND CARRIAGE WHEELS. One owner mill that will be in production until auction day. Loading available. Located at 502 Spring Creek Rd. Cullen, VA 23934. Call Jonathon 574.349.4380

2451

2005 Wood-Mizer LT70 Portable Bandmill
1"x24'' bandwheels, 1 1/2''x15'4" bands, VIN-456C7241X5NAA5282, Meter reads 4837 hours, 80"x24' long overall, 60" log loading arm, 32" log turner, 40"x13'6" log bed, Debarker attachment, 59 hp 4 cylinder CAT diesel engine, 42"x60" shop built landing table, Pulls with 2 5/16" ball hitch, Will have brand new Accuset automated setworks before auction day, Includes approximately 18 bands that have been sharpened once. Good machine ready for production. Located at 3856 Farm Rd. 2175 Exeter, MO 65647. Call Eugene with any questions at 260-350-8953.

2451A

2002 Wood-Mizer LT40 Super Hydraulic Portable Bandsaw
VIN 456C62417NKJ3960, METER READS 782 HOURS, Kubota diesel engine, debarker, log loader, log turner, 1 1/2" band, will have new Accuset II setworks installed. Located at: 3124 Fillmore Rd. Seymour, IA 52590. Call Jonathon 574.349.4380

2452

2016 Wood-Mizer LT40 Portable Bandmill
                                VIN-456B42414GNMK6231, Only 283 hours, Has debarker attachment, 1"x18" band wheels, 1 1/4" bands, Kohler 26.5 hp gas engine, 64" log loading arm, Simpleset automated setworks, Tires have approximately 85% tread remaining, Like new machine ready to pull home and start production. Crane is onsite to load onto your trailer. Located at 1856 River Rd. Marietta, PA 17545. Call Eugene with any questions at 260-350-8953.

2453

2004 Wood-Mizer LT40 Portable Bandmill
VIN-456B424164NEJ8243, Meter reads 2393 hours, Has debarker attachment, 1"X18" band wheels, 1 1/4" bands, 25 hp Kohler gas engine, 64" log loading arm, Tires have approximately 75% tread remaining,Everything works including lights,brakes, and debarker. New gas tank, new brushes on debarker motor, and some new lights. Good working machine ready for production. Crane is onsite to load onto your trailer. Located at 1856 River Rd. Marietta, PA 17545. Call Eugene with any questions at 260-350-8953.

2454

2000 Wood-Mizer LT40 Portable Sawmill
VIN 456B42419XNFH3756, only 147 original hours, fully hydraulic,debarker, has setworks, Kohler gas engine, log loader, log turner, log clamps, includes 25 new 0.045 x 1.25 x 158 bands, always stored inside. IN LIKE NEW CONDITION. Never cut much wood. Located at 4855 East Wayne Lane Parkersburg, IL 62452. Call Jonathon @ 574.349.4380

2455

1993 LT40 Wood-mizer
Fully hydraulic with 12V guide system, ride on seat, hydraulic log tapers, Onan gas engine. Only 1,491 hrs! New paint, new tires! Very Nice Mill! Located at: 10418 Kinsman RD Newbury Township OH Contact Eugene 260.350.8953

2456

Timber King Band Mill
MN B16, hydraulic, 26 HP Honda on head, 5 HP Honda on hydraulic unit, 10 new bands, Good condition.Located at 56546 Eli Valley Rd  Loganville, WI 53943. Call Eugene with  any questions at 260-350-8953.

2458

Portable Baker Edger
Ser. # 2K-113 Model BE-O powered by Honda engine that runs great, has infeed & outfeed, has complete tow package w-new lights, Self Contained Hyd. unit, two blades w-one being movable, two sets of extra blades, 2.5''X28'' capacity, overall dimensions are 66''X14' movable fence, this machine has low hrs. and was never used hard. Very nice! located at: 5255 Lawrence RD Nashville MI 49073, contact Eugene 260.350.8953

2459

Timber King Talon Edger
With 24 HP Honda engine. Good Condition! Located at 56546 Eli Valley Rd. Loganville, WI 53943. Call Eugene with any questions at 260-350-8953.

2460

Timber King Setter
Dual tooth. Located at 56546 Eli Valley Rd. Loganville, WI 53943. Call Eugene with any questions at 260-350-8953. 

2461

Wood-Mizer Sharpener
Located at 56546 Eli Valley Rd. Loganville, WI 53943. Call Eugene with any questions at 260-350-8953.

2462

Lumber Cart
Located at 56546 Eli Valley Rd. Loganville, WI 53943. Call Eugene with any questions at 260-350-8953.

2463

Lumber Cart
Located at 56546 Eli Valley Rd. Loganville, WI 53943. Call Eugene with any questions at 260-350-8953.

2464

Lumber Cart
NO WHEELS. Located at 56546 Eli Valley Rd. Loganville, WI 53943. Call Eugene with any questions at 260-350-8953.

2465

Lumber Cart
Located at 56546 Eli Valley Rd. Loganville, WI 53943. Call Eugene with any questions at 260-350-8953.

2500

Does not sell
Made in 1986, Machine # - 222-737, 5"x9" capacity, Spiral cutting heads on top and bottom heads, Electric drive. Located at 7588 N Dingle Rd. Williamsburg, IN 47393. Call Eugene with any questions at 260-350-8953. 

2501

Does not sell
Approximately 45 heads total, Assorted sizes and styles. Located at 7588 N Dingle Rd. Williamsburg, IN 47393. Call Eugene with any questions at 260-350-8953.

2502

22" Dust Blower
No drive, 11" inlet, 9"x11" outlet. Located at 7588 N Dingle Rd. Williamsburg, IN 47393. Call Eugene with any questions at 260-350-8953.

2503

Dust Pipe
Approximately 38' of 12" Galvanized pipe. Located at 7588 N Dingle Rd. Williamsburg, IN 47393. Call Eugene with any questions at 260-350-8953.

2504

Wood Doctor Wood Stove
In good working condition, 55"x65" overall, Has blower fan. Located at 7588 N Dingle Rd. Williamsburg, IN 47393. Call Eugene with any questions at 260-350-8953.

2505

Wood Stove
Water jacket has leak that needs repaired before use, 5'x6' overall. Located at 7588 N Dingle Rd. Williamsburg, IN 47393. Call Eugene with any questions at 260-350-8953.

2506

Pendu Hydraulic Slab Saw
3 extra 29" blades, (1)15 hp and (1)5 hp electric motors, SN-SRL-703, 28"x11' belt conveyor infeed, 24" belt, 8" sides. Very nice. Located at 3161 Franklin Pike, Cochranton, PA 16314. Call Eugene with any questions at 260-350-8953.

2507

Pendu Incline Belt Conveyor
SN-WSC-170, Electric drive, 42"x11', 29"-64" height, 26" belt, 3" sides. Located at 3161 Franklin Pike, Cochranton, PA 16314. Call Eugene with any questions at 260-350-8953.

2508

26" Dust Blower
13" inlet and outlet, Electric drive. Located at 3161 Franklin Pike, Cochranton, PA 16314. Call Eugene with any questions at 260-350-8953.

2509

18" Dust Blower
Electric drive, 8 1/2" inlet, 9"x9" outlet. Located at 3161 Franklin Pike, Cochranton, PA 16314. Call Eugene with any questions at 260-350-8953.

2510

Cyclone
5'x11'6'', 14" inlet. Located at 3161 Franklin Pike, Cochranton, PA 16314. Call Eugene with any questions at 260-350-8953.

2511

Galvanized and Steel Dust Pipe
Approximately 80' of 15" pipe. Located at 3161 Franklin Pike, Cochranton, PA 16314. Call Eugene with any questions at 260-350-8953.

2512

Morgan 4-Head Re-Saw w/ Return
LIKE NEW! SN-527050621, 7'x21'x64" tall overall, 1"x24" band wheels, 1 1/4" bands, 6" feed belt, Fully Hydraulic. 8"x7' return belt, In like new condition, Ready for production. Located at 5871 ST RT 335, Beaver, OH 45613. Call Eugene with any questions at 260-350-8953.

2512A

Yoder Hydraulic Unit
Unit has pumps, oil tank & clutch, pumps were only used for approx. one year. Unit was installed in 2010, used for a year then sat idle ever since. Everything worked good when parked. 3 sections of 3 pumps each. (9 total) vary from 10 GPM thru 40 GPM. Located at: 4070 Wilcox RD Middlefield OH Contact Eugene 260.350.8953

2513

Kubota Diesel w/ Air Compressor
Meter reads 10,951 hours on Kubota and on compressor., In good running condition. Located at 1587 Wheat Ridge RD West Union OH 45693. Call Eugene with any questions at 260-350-8953.

2514

Air Tank
38"x8'x44" tall, No leaks.  Located at 1587 Wheat Ridge RD West Union OH 45693. Call Eugene with any questions at 260-350-8953.

2515

Frick 5-Blade Edger
6"x48" capacity, Has almost all new bearings except for 1 that needs to be replaced, 14" and 16" blades, 54"x80" infeed rolls, No drive, 5'x12'x4' tall overall, No moveable blades, Cemarline laser light-like brand new(SN-41544) 12V power, Includes (3) 18" blades, (3) 14" blades, (2) 16" blades, Assortment of groover blades and lots of replacement teeth, Extra bearing and spacers. Located at 1665 Parker RD Hillsboro KY 41049. Call Eugene with any questions at 260-350-8953.

2516

Vibrating Conveyer
27"x15', 24" pan, 4" sides, No drive. Located at 1665 Parker RD Hillsboro KY 41049. Call Eugene with any questions at 260-350-8953.

2517

Precision 48" 3-Knife Chipper
SN-C-257, Includes new 4-groove belt for motor, No drive, 9 extra knives-freshly sharpened, 1 brand new counter knife, 3 extra knife holders. Located at 1665 Parker RD Hillsboro KY 41049. Call Eugene with any questions at 260-350-8953.

2518

IBM # 40 Sawmill
3 Headblock Left Hand Carriage, 57' track, electric over hydraulic, has setworks, 100 HP motor on husk, 40 and 10 HP hydraulic units, was being run with 50" blade, has been sitting for 10 years but appears to be in decent shape. Brand unknown. Located at: 25764 Hwy. 81 Cuba City, WI 53807. Call Jonathon 574.349.4380 

2519

Weaver Cut-off Saw
Weaver Cut-off Saw with a Honda 13 HP gas engine. 20" Blade (no blade), Infeed rollcase is 10' long with 16" x 2 1/2" rolls. Good Condition.
Location: 187 Farmall Road, Aaronsburg, PA 16820
Contact: Steve (570) 460-0286

2520

Double Head Resaw
Resaw has two adjustable heads, board kicker with return. 10 new bands, new bearings on Bandwheels. Good condition.
Location: 187 Farmall Road, Aaronsburg, PA 16820
Contact: Steve (570) 460-0286

2521

Powered Rollcase
10' section of powered rollcase, rolls are 18" long x 5 1/2" diameter. Hydraulic drive missing some sprockets and no chain.
Location: 187 Farmall Road, Aaronsburg, PA 16820
Contact: Steve (570) 460-0286

2522

Banding Tool
3/4" Metal Strapping Tool, good condition.
Location: 187 Farmall Road, Aaronsburg, PA 16820
Contact: Steve (570) 460-0286

2523

Rollcase
10' Rollcase 21 1/2" rolls, has the option to be upgraded with an air-powered lift to drive the rolls.
Location: 187 Farmall Road, Aaronsburg, PA 16820
Contact: Steve (570) 460-0286

2524

Board Deduster
Deduster has a 5" belt.
Location: 187 Farmall Road, Aaronsburg, PA 16820
Contact: Steve (570) 460-0286

2539

Morgan Resaw with Deduster
Morgan Single Head Resaw, does not have electric motors.
Location: 204 Brumley Road, Fultonville, NY 12072
Contact: Steve (570) 460-0286

2540

McDonough Center Split Resaw
6 1/2"x54" band wheels, 1" mead on top band wheel, SN-54-1150, Weight strain, No drive for head, Hydraulic drive for power feed. Located at 2195 Gabe Rd. Greensburg, KY 42743. Call Jonathon with any questions at 574-349-4380.

2541

Brewer Golden Eagle B Series Board Stacker
Model-GE-B-STACKER, SN-042601, Hydraulic and electric drives, In working condition. Located at 2195 Gabe Rd. Greensburg, KY 42743. Call Jonathon with any questions at 574-349-4380.

2544

Complete HMC Mill
Model AC 40BD, serial # 504-91, complete mill including, 4 headblock carriage, track, husk, feed, drive, electric motor for husk, cab and controls. no setworks, just taken out of production. Out and ready to load. Located at: 158 Fred Sherry Lumber Ln. Edensburg, PA 15714. Call Jonathon 574.349.4380

2559

Meuser Lathe
Fabrication Number-23522, Made in 1959, Electric motor, 42"x11'x50' tall, 16" wheel size capacity, Includes pallet of extra parts, In good working condition. Located at 601 Front St. Central City, KY, 42330. Call Eugene with any questions at 260-350-8953.

2560

Ex-Cell-O Milling Machine
SN-45, Electric drive, Good working condition. Located at 601 Front St. Central City, KY, 42330. Call Eugene with any questions at 260-350-8953.

2561

Brewco Siding Moulder
Used to make quarter log siding, 40 hp electric motor on head, 3 hp hydraulic pack on feed, 8" width capacity, Very good working machine. See pictures for examples of siding produced with this moulder. Located at 601 Front St. Central City, KY, 42330. Call Eugene with any questions at 260-350-8953.

2562

Knife Grinder
1 hp electric motor, 8" grinding wheel, 18"x6'x45" tall. Located at 601 Front St. Central City, KY, 42330. Call Eugene with any questions at 260-350-8953.

2563

Lumber Cart and Track
52"x88" w/ 6' side posts, (2) 30' long pieces of steel track. Located at 601 Front St. Central City, KY, 42330. Call Eugene with any questions at 260-350-8953.

2564

Lumber Rack
72"x76"x44" tall. Located at 601 Front St. Central City, KY, 42330. Call Eugene with any questions at 260-350-8953.

2565

Dust Collection System
Includes all pipe from equipment to cyclone on roof, Assorted PVC pipe, Approximately 40' of 12" galvanized pipe, 10 hp blower on 8' cyclone on roof. Located at 601 Front St. Central City, KY, 42330. Call Eugene with any questions at 260-350-8953.

2566

Morbark Vibrating Conveyor
45"x30' overall, conveyor is 27' long, 30" pan, 9" sides, No drive. Located at 673 Mcatee Rd. Cadiz, KY, 42211. Call Eugene with any questions at 260-350-8953.

2567

Brewco 40 HP Hydraulic Pack
3'x4'x16" tall tank. Located at 673 Mcatee Rd. Cadiz, KY, 42211. Call Eugene with any questions at 260-350-8953.

2568

Morbark 25 HP Hydraulic Pack
18"x30"x32" tall tank. Located at 673 Mcatee Rd. Cadiz, KY, 42211. Call Eugene with any questions at 260-350-8953.

2569

Hurdle 3 HB Carriage
6'x14', Air dogs, Needs new setworks, Triple axle, Missing 2 wheels on front side. Located at 673 Mcatee Rd. Cadiz, KY, 42211. Call Eugene with any questions at 260-350-8953.

2570

Detroit Diesel Power Unit
Meter reads 7362 hours, Model-10675533, 5-groove pulley. Located at 673 Mcatee Rd. Cadiz, KY, 42211. Call Eugene with any questions at 260-350-8953.

2571

Belt Conveyor
Electric drive with speed reducer, 32"x150' long, 23" belt, 16" sides, In 3 pieces. Located at 673 Mcatee Rd. Cadiz, KY, 42211. Call Eugene with any questions at 260-350-8953.

2572

Morgan Single Head Re-Saw w/ Return
Less than 150 hours on this machine! SN-106030317, 1"x24" bands wheels, 1 1/4" bands, 6"x13' belt feed, 8"x7' return belt, 15 hp electric drive. Located at 52240 Co Rd 35, Bristol, IN, 46540. Call Eugene with any questions at 260-350-8953.

2573

Predator 24 HP Gas Engine
Was just fully gone through by shop, everything works as it should. Located at 52240 Co Rd 35, Bristol, IN, 46540. Call Eugene with any questions at 260-350-8953.

2574

Waukesha Genset
Model F8176. Serial# 1073716963. Sturdy 6 cylinder gas engine that could be converted to natural gas. Runs good, new carburetor,  new starter solenoid. Heavy duty cutoff switch included. Hours unknown. Onan 115 kw, 3 phase, 480 volt. Will load. Located at 183 Patterson Rd. Brushton, NY 12916. Contact Tim Graber 269-986-5693.

2575

2576

Mitsubishi Power Unit w/ Rockford Clutch
64 HP, meter reads 2152 hours, was used to run 2575. Located at: 412 Lockes Mill Road. Milroy PA, 17063. Call Jonathon 574.349.4380

2608

Reckart Debarker
Reckart Debarker 36" Debarking Head not included. The machine was in service until replaced with new Debarker.
Location: 14230 Ohio River Rd West Columbia WV 25287
Contact: Steve (570) 460-0286.

2609

Infeed Log Deck
Log Deck with Stop & Load, 3-Strand,10' wide x 16' long, Hydraulic power.Was in use prior to new Deck installation.
Location: 14230 Ohio River Rd West Columbia WV 25287
Contact: Steve (570) 460-0286.
 

2610

Perkins Diesel Power Unit with PTO
4-cylinder Diesel Power Unit
Location: 8871 Townsendville Road Interlacken, NY 14847
Contact: Steve (570) 460-0286

2611

Lincoln 40 HP Electric Motor with Box

Location: 8871 Townsendville Road Interlacken, NY 14847
Contact: Steve (570) 460-0286

2612

PTO Shaft
Walterscheid PTO Shaft,  540 spline
Location: 8871 Townsendville Road Interlacken, NY 14847
Contact: Steve (570) 460-0286

2613

Double Arbor Gangsaw
Line Shaft, comes with (8) blades.
Location: 8871 Townsendville Road Interlacken, NY 14847
Contact: Steve (570) 460-0286
 

2614

Saw Blades 12"
(8) New 12"- 2" arbor will fit Gangsaw.
Location: 8871 Townsendville Road Interlacken, NY 14847
Contact: Steve (570) 460-0286

2615

Single Head Resaw
Custom Built Single Head Resaw comes with (9) Spare Bands
Location: 8871 Townsendville Road Interlacken, NY 14847
Contact: Steve (570) 460-0286

2616

DeWalt Radial Arm Saw
DeWalt Radial Arm Saw

Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2617

Whirlwind Pop-up Saw
Model: 212R, 3PH 10 HP, 18" and comes with 1 extra blade

Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2618

Cornell Sawdust Blower
15HP 3PH, 9' input - 10" output

Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2619

Double Head Notcher
(2) 30HP Motors,
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2620

Cook Belt Conveyor
Cook Resaw Belt Conveyors 8"x17' belt with Hydraulic Drive, 8" x 12' with Hydraulic Drive and holdowns.
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2621

Campbell Hausfeld Air Compressor
Baldor 5HP 3PH Motor
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2622

Hydraulic Tank for Duetz Power Pack
Beiler Hydraulics Tank
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2623

Deutz Diesel Power Unit
74 HP with NACD PTO

Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2624

Baker Single Head Resaw
Lincoln 15HP 3PH Motor, 1 1/2" Band, 28" Wheels
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2625

Chamfer Machine
WEG 7 1/2HP, 3PH on the head, 1 1/4 HP on the drive, no belts.
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2626

Double End Trimsaw
8' capacity, 22" Blades, Westinghouse 10HP saw motor, 2HP drive motor, missing one saw and motor.
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2627

Hazelthorn Single Head Notcher
Ajax 20 HP motor
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2628

Morbark Log Deck
3-strand deck 10' x 21' with 24" nose skids, hydraulic power. One strand cut off for transport.
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2629

Drill Press
Walker-Turner Drill Press with Rockwell 1HP motor, needs repair to cracked housing (see photo) and missing chuck.
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2630

Milwaukee Panel Saw
Milwaukee 3 1/2HP Saw, Good Condition
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2631

Mattison Straightline Rip
Model 404, 20HP 3PH, 14" saw, one extra blade
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2632

Parker Hydraulic Pack
Model: HPU19253, 3000 psi maximum, Baldor 7 1/2 HP 3 PH motor
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2633

Doublehead Drill Table
Two Drill heads on mounted on slides Electric Motors HP unknown, machine was used to build Apple Crates.
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286
 

2634

Laser Light
LASALIGN Model 4704-6, Laser Light, 110 volt.
Location: 5077 Erron Hill Road, Locke, NY 13092
Contact: Steve (570) 460-0286

2650

Incline Belt Conveyor
Kawasaki 170 gas engine, 16" cleated belt, 10" sides, 30' long. Located at 706 PA-655, Allensville, PA 17002. Call Jonathon with any questions at 574-349-4380.

2700

2000 International F-8100 Truck, VIN # 1HTHCATR3YH283116
Year: 2000
Make: International
Model: F-8100
Mileage:330,338
Drive Line: 6x4
Engine Type: L6, 10.3L
Fuel Type: Diesel
Transmission: Eaton Fuller 7-Speed Manual
VIN #: 1HTHCATR3YH283116

Features and Notes: 102"x24'x4' tall log bed, Cab has Heat/AC, Good running truck, Clean title and road ready. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

2701

International Truck Hood
Fits 2000 International 8100. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

2702

Brand New Bed for 2022 Dodge Ram 3500 Dually
8' bed, Was removed less than 50 miles after purchase to install a steel flatbed. Located at 1587 Wheat Ridge RD West Union OH 45693. Call Eugene with any questions at 260-350-8953.

2703

1999 Ford F-450 Service Truck, VIN # 1FDXF46F0XEE19684
Year: 1999
Make: Ford
Model: F-450
Mileage: meter reads 194,112
Body Type: 2 Door Cab; Regular; Chassis
Trim Level: Base
Drive Line: 4x2; Dual Rear Wheels
Engine Type: V8, 7.3L; Turbo
Fuel Type: Diesel
Transmission: manual
VIN #: 1FDXF46F0XEE19684

Features and Notes: runs and operates, includes air compressor, has title. Located at 260 Elkin Wildlife Rd. Elkin, NC 28621. Call Jonathon 574.349.4380

2704

99 Freightliner Century Truck
Vin 1FUYSZYB4XLA81998, 12.7 detroit- 10 speed trans tandom axle..air ride suspension- air ride cab all in great shape motor has zero blow by, truck shows 957K miles but is not correct..rebuilt title due to prior cab damage, overall good con. located at:  Bonnyville KY 42713 contact Eugene 260.350.8953

https://youtube.com/shorts/0DxBqac6Yn4?feature=share
https://youtube.com/shorts/JsjkTJx03kg?feature=share

2705

2750

Interstate Pup-Log Trailer
Clean title, Pintle hitch, 8'x24', 4' tall log bunks, In good condition. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

2751

Interstate Equipment Trailer
Clean title, Road ready, Pintle hitch, 8'x19' main deck, 5' dovetail, 5' ramps. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

2772

Fontaine Road Gear Flat Bed Trailer
VIN 13N14830XV1576937, 94" x 48', dual single wheel axle, steel frame with aluminum rails, good retread tires size 425/65R 22.5, aluminum rims. Located at: 8530 Colonel Drake Hwy. Mahaffey, PA 15757. Call Jonathon 574.349.4380

2800

Skid-Steer Log Splitter
Heavy duty shop built, Runs on skid steer hydraulic hook up, 5' log length capacity, 11' long overall. Located at 3856 Farm Rd. 2175 Exeter, MO 65647. Call Eugene with any questions at 260-350-8953.

2801

2802

6'' Gorman Rupp Trailer Mounted Pump
MN 86A2-F300, Ford straight six motor, 20' of suction line with basket. This pump ran and pumped awesome when parked. Needs some TLC to get her going. Manuals included. Purchase for a fraction of new. Can help load out with notice.Located at: 10525 Stafford RD Chagrin Falls OH 44023 Contact Eugene 260.350.8953 

2803

USED Spectra DG711 Pipe Laser
Nice unit runs and functions as it should, comes with two batteries and charger. Also comes with Quick state guide, two 6'' targets,one 12'' target and remote control. Really a nice unit. Willing to ship UPS for additional fee (what they charge). Located at: 10525 Stafford RD Chagrin Falls OH 44023 Contact Eugene 260.350.8953

2804

New Spectra DG711 Pipe Laser
Nice unit, never seen the dirt. Comes with two batteries and charger. Also comes with the manual one 6'' target, one 12'' target and remote control. Really a nice unit. RUNS AND FUNCTIONS AS NEW! Willing to ship UPS for additional fee (what they charge). Located at: 10525 Stafford RD Chagrin Falls OH 44023 Contact Eugene 260.350.8953

2805

Magna Sine Magnum Solar Power Inverter
Model-MS2024, SN-AJ-00770. Located at 1587 Wheat Ridge RD West Union OH 45693. Call Eugene with any questions at 260-350-8953.

2806

Mini Barn
10'x16' with 7' sidewalls, 4'x10' overhead storage on each end, 6'x6' double door, Metal roof. Located at 1587 Wheat Ridge RD West Union OH 45693. Call Eugene with any questions at 260-350-8953.

2807

Mini Barn
8'x12' with hip roof truss style, 4' loft, Metal roof, Includes ramp for lawn mowers, garden tractors, etc. Located at 1587 Wheat Ridge RD West Union OH 45693. Call Eugene with any questions at 260-350-8953.

2808

Mini Barn
8'x12' with 6' sidewalls, 5' double door, Metal roof. Located at 1587 Wheat Ridge RD West Union OH 45693. Call Eugene with any questions at 260-350-8953.

2809

Mini Barn
8'x8' with hip roof style trusses, 3' swinging door, Metal roof. Located at 1587 Wheat Ridge RD, West Union, OH 45693. Call Eugene with any questions at 260-350-8953.

2810

Mini Barn
8'x8' with hip roof style trusses, 6'x6' double door, Metal roof. Located at 1587 Wheat Ridge RD, West Union, OH 45693. Call Eugene with any questions at 260-350-8953.

2811

Hunting Blind
6'x6', 3' swinging door, (3) 12"x20" sliding shooting windows. Located at 1587 Wheat Ridge RD, West Union, OH 45693. Call Eugene with any questions at 260-350-8953.

2812

80' of 78RT1 Turtletop Chain
In good condition. Located at 1665 Parker RD, Hillsboro, KY 41049. Call Eugene with any questions at 260-350-8953.

2813

70' of #60 Roller Chain
Like new conditon. Located at 1665 Parker RD, Hillsboro, KY 41049. Call Eugene with any questions at 260-350-8953.

2814

Curtis Gearbox
In good working condition. Located at 1665 Parker RD, Hillsboro, KY 41049. Call Eugene with any questions at 260-350-8953.

2819

Kawasaki Water Cooled OHV Engine
Model FD750D, 27 HP. Call Jonathon 574.349.4380. Located at: 4546 Lawrence Rd. Sumner, IL 62466

2820

5.9 Cummins Engine
Just overhauled. 175 HP. Call Jonathon 574.349.4380. Located at: 4546 Lawrence Rd. Sumner, IL 62466

2821

Crimpmaster Hydraulic Hose Crimper
Includes dies for 3/8"-1/2"-3/4"-1"-1 1/4"-1 1/2" & 2" hoses. Good working condition. Call Jonathon 574.349.4380. Located at: 4546 Lawrence Rd. Sumner, IL 62466

2822

Microfiche Reader
Model Datamate 80. Call Jonathon 574.349.4380. Located at: 4546 Lawrence Rd. Sumner, IL 62466

2823

Carco Winch
Fits Deere or Cat if you have the right coupler. Call Jonathon 574.349.4380. Located at: 4546 Lawrence Rd. Sumner, IL 62466

2824

Loader Bucket
8' 9". Call Jonathon 574.349.4380. Located at: 4546 Lawrence Rd. Sumner, IL 62466

2824A

Wheel Loader Bucket
Quick attach, 90" wide. Located at 673 Mcatee Rd. Cadiz, KY, 42211. Call Eugene with any questions at 260-350-8953.

2825

New ASV 100 Skidsteer Hood
Call Jonathon 574.349.4380. Located at: 4546 Lawrence Rd. Sumner, IL 62466

2826

Commercial Parts Washer
38'' Wide 38'' Deep 58'' Tall. good unit.

3000

15/16" Rustic White Oak Lumber
574 Board feet, 5-6" wide, 12' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3001

15/16" Rustic White Oak Lumber
512 Board feet, 5-6" wide, 12' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3001A

15/16" Rustic White Oak Lumber
231 Board feet, 5-6" wide, 12' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3002

15/16" Rustic White Oak Lumber
1081 Board feet, 5-6" wide, 11-12' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3003

15/16" Rustic White Oak Lumber
611 Board feet, 5-6" wide, 16-14' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3004

15/16" Rustic White Oak Lumber
668 Board feet, 5-6" wide, 16-14' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3005

15/16" Hickory Lumber
1080 Board feet, 5-12" wide, 9-10' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3006

15/16" Hickory Lumber
884 Board feet, 4-14" wide, 6-8' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3007

15/16" Hickory Lumber
467 Board feet, 4-12" wide, 7-8' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3008

15/16" Red Oak Lumber
239 Board feet, 4-10" wide, 9-10' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3009

15/16" Red Oak Lumber
391 Board feet, 5-12" wide, 9-10' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3010

15/16" Red Oak Lumber
819 Board feet, 4-12" wide, 6-10' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3011

15/16" Cherry Lumber
385 Board feet, 5-14" wide, 9-10' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3012

15/16" Cherry Lumber
819 Board feet, 4-12" wide, 7-12' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3013

15/16" Red Oak Lumber
410 Board feet, 4-12" wide, 9-10' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3014

15/16" Red Oak Lumber
165 Board feet, 6-14" wide, 8-10' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3015

15/16" Cherry Lumber
480 Board feet, 5-10" wide, 8-12' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3016

15/16" Cherry Lumber
868 Board feet, 4-8" wide, 7-10' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.

3017

15/16" Red Oak Lumber
268 Board feet, 4-8" wide, 6-8' long. Located at 501 S. Miller Dr. White Pigeon MI 49099. Contact Tim Graber 269-986-5693.