MITCHCO - MANUFACTURING - FABRICATION SHOP LIQUIDATION
Previous Page Listing ID#: 1412352

Auction Location

Ponca City, OK 74601
Auction Dates and TimesSALE IS COMPLETED
Tuesday Jun 14, 2022 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Mr. Ed's Auction Company

Website: www.mredsauction.com

GoToAuction.com ID#: 4716
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
10% Buyer's premium will be added to final sale price for online winning bids. Inventory must be paid for with cash, credit card or wire transfer. 3% Convenience Fee will apply to all credit card charges that exceed $1,000. If you plan to bid off site during the simulcast auction, you will need to pre-register and be pre-approved prior to the start of the auction at 10:00 am. 1. No sale shall be invalidated by reason of any defect of the lot or inaccuracy in any of the lots by reason of their being incorrectly described by the Auctioneer/Staff or elsewhere and no liability shall be by the Auctioneers/Staff in respect of any such faults or errors. Advertising information has been prepared only as a guide based on information from sources generally believed to be reliable and from the consignor but the accuracy thereof cannot be guaranteed or warranted by the Auctioneers. Bidder acknowledges that it is his responsibility to inspect all equipment and to make his own inquiries. 2. Unless prior arrangements are made, miscellaneous items left after 7 days following Purchaser's payment will be considered abandoned and sold for storage. Titled vehicles will be charged $25.00 per day following the Auction. Vehicles left outside the security gate longer than 1 week following the auction will be towed at owners' expense. 3. The highest bidder shall be the purchaser and no bidder shall retract his bid. ALL BIDS MADE IN U.S. DOLLARS. All sales are final. All buyers must register and agree to the following terms and conditions prior to bidding. If the Auctioneer determines that any bid is not commensurate with the value of the article offered, he may reject the same and withdraw the item from the auction, and having acknowledged an opening bid, he decides that an advance is not sufficient, he may reject the advance. Auctioneer reserves the right to bid on behalf of Buyers, Seller and/or Secured parties. 4. Any dispute arising as to any bid shall be settled by the Auctioneers at their sole discretion and at the Auctioneers' discretion, the Auctioneer may immediately put the lot in the dispute up again for sale with the original purchaser responsible for sale fees, no sale fees and any deficit in sale price 5. The Auctioneers shall have the right to consolidate or break down lots, or to offer a complete facility as a single lot. Auctioneers reserve the right not to acknowledge or accept any bid even if it is merely a fractional advance over the preceding bid. The Auctioneers retain the right, without notice, to withdraw any lot or lots, prior to sale of said lots. 6. The Auctioneers assume no responsibility for any liability once bid is accepted. Merchandise "as is" with all faults. Purchasers are advised to pre-arrange for insurance coverage of their purchases. Ownership title passes upon the fall of the Auctioneer's gavel and/or ending of online bid and thereafter the property is at the risk of the buyer and neither the seller, nor the auctioneer shall be responsible for loss or damage. 7. Titles are processed in accordance with the Oklahoma DMV. Rules in the State of Oklahoma may differ from rules in other states and may require further processing by the buyer. Units that do not require titles in Oklahoma may have such requirements in other states. The auctioneer/owner is not responsible and may not be able to in some cases provide documentation required by other states. Bankruptcy Assets will be transfered via Bill of Sale. 8. All applicable sales or excise taxes will be added to the purchase price of all taxable items unless the buyer files with the Auctioneers proof of exemption from all such taxes in a form satisfactory to the auctioneers. If there is a buyer's premium, the tax is applied after the combined total. 9. The purchaser shall not be entitled to possession of any of his purchases until total purchase price of all his purchases has been fully paid and in the event the purchaser fails to pay the full purchase price for any lot within the prescribed time or fails to comply with any other terms of sale, the Auctioneers shall retain the possessory lien on all lots of the purchaser, and have the right to resell such lots by public or private sale without notice of any kind to the Purchaser. Any deficiency arising upon the resale, together with all expenses thereof, shall be paid by the purchaser. Any auction deposit shall be retained by the Auctioneers for application against such deficiency. Forfeiture of the deposit does not release the buyer from full payment. 10. All cost and the responsibility of such removal shall be borne by the purchaser. The Auctioneers reserve the right to require proof of adequate insurance coverage from any purchaser of lots requiring dismantling, rigging or hot cutting. Purchaser agrees to indemnify and save harmless both the Consignor and Auctioneers against any damage caused by the act of Purchaser and/or his agents in connection with the dismantling or removal of any lot. If removal of said lots requires licensed contractors, buyer agrees to the hiring of said contractor who can provide proof of adequate insurance coverage. 11. All lots must be removed within the time announced or posted at sale. At Purchasers' sole cost and risk, and only in a manner approved by the Auctioneers. If for any reason the purchaser fails to remove any lot within the time specified, the lot shall be deemed abandoned and the Auctioneers, at their sole discretion, may resell per paragraph 8 above or removed and store the said lots at Purchasers' sole risk and expense. In addition, Purchaser shall be liable for any rent incurred or damages suffered by the Auctioneers because of Purchasers' failure to remove any lot within 10 days. 12. If for any reason whatsoever, the Auctioneers' are unable to deliver any lot, or any necessary documentation required in respect of any lot, the Auctioneers' sole liability, if any shall be the return of any monies paid on such lot. 13. Except as herein set out there shall be no guarantees or warranties expressed or implied, statutory or otherwise of any nature whatsoever. Each and every item will be sold "As Is, Where Is", with all faults. ALL SALES ARE FINAL. CONDITION OF LOTS: Bidders shall examine or inspect items prior to the day of the auction. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. neither Seller nor Mr Ed's Auction Company MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET. Mr Ed's Auction Company & Seller EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No allowance will be made for errors in cataloging, genuineness, defects, or imperfections not noted. CLAIMS: No claims will be allowed after the said item has been removed from the premises. 14. Bidder acknowledges that an auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at his own risk with notice of the condition of the premises, the activities on the premises and the conduct of the third parties and the Bidder shall so advise his agents and employees. No person shall have any claim against the auctioneers, their agents, employees, sellers, owners or principals for any injuries sustained or for damages to or loss of property which may occur from any causes whatsoever.
Listing Information
WELDING, MANUFACTURING AND FABRICATION SHOP LIQUIDATION AUCTION

7500
Colchester Harrison GE Fanuc 1460 XS
Model: Alpha 1460XS, Serial No.: X3S040, Built in 2007, Spindle RPM: 2250, Wiring Diagram: BFE-M01-T06/A, 230 Volts, 3-Phase, 60 Hertz, 40 Amps. Notes from Owner: Serviced approx March 1st, 2022. Checked out well, very tight. Have backup setup progr...

7501
Monarch Mod N 25 Industrial Lathe w/ Tooling
Model N25, Spec: MIL-L-4370, Serial No: 39293, Order No: AF 30227, Stock No.: 8100-446510, Catalogue Size: 5"N, MFR's Serial No.: 39293, Actual Swing: 30.5", Distance Between Centers: 96", Built 12-1953. Notes from Owner: 30.5" Swing and 96" between...

7502
Milltronics Partner VIII Comet VMC 1250 w/ Tooling
Model: MC-1000G, A.C. 220V =/- 10%, Phase: 3, Freq. 50/60 Hz, Power: 25 KVA, Air 6.5 K, 6200KG, Notes from Owner: Tool Changer 25, Open Table Checked approx Jan 15, 2022

7503
U.S. Industrial Machinery Shear
Model US 10375, Serial # J 2002-018, Notes from Owner: 3/8" C.S. Max, 10' Length. Will cut down to 20ga. CS Blade is still on 1st turn (3 more to go). A little dull. 1st 2' for thin material. Very Nice Machine

7504
Montgomery 8' Roller
Model No.: 9625, Serial No.: 081453, Approx Weight: 9500 lbs, Total HP: 10, Voltage: 230, 26 Amps, 60 Hz, Notes from Owner: Hydraulic prop end, initial pinch w/ digital read out, back roll and adjustable front. Back rolls well, 8' of 1/4", 4' 7/16....

7505
Acorn Table 6' x 8'
Notes from Owner: Fit up and tack on table, no tooling. We used wedges to square, very fast fit up.

7506
8' x 20' Burn Table-High Definition
Mach No: 296-81, Model No.: CM56-96, Serial No.: 72-4-072, Notes from Owner: Updated Hypertherm edge T 1, New gears, servo & racks 8-10 years ago. Nesting program w/ height controls, will cut 8" plate w/ oxy propylene and 1/2 " well with 1250 Hypert...

7507
Kearney & Trecker Mill
Type: N204X, Ser#: RE82062, 3HP, 1725 RPM, 3 Phase, 60CV, 480 Volts, 5.2 Amps Notes from Owner: This machine was replaced with CNC mill, worked well last time used which was approx 10 years ago.

7508
Rotary Indexing Table
Notes from Owner: Mod PDGH, Ser 505, Electric Rotopic

7509
Marvel Series 8 Mark I Band Saw w/ 2 Roller Tables
Series: 8, Model No: MK 1, Serial No.: 821434-W-LC. Notes from Owner: Marvel High Column - (24'H x 18' D) Blade is 156" x 1" x .035 x 416

7510
Do All Model C9V Metal Cutting Band Saw
Model: C-9V, Serial No.: 296-72156, Volt: 220, Inst Amps: 30.0, Normal Amps: 4.8, Cycle: 60, Phase: 3. Notes from Owner: Never Ran Saw, Tried to start but it would not.

7511
Ansul Fire Suppression Vent A Hood for Food Truck
Model: HMVH-23, Serial No.: HM33690, Volts: 230, Phase: 1, Hz: 60. Notes from Owner: Used once as a vent @ trade show. Never installed

7512
Baldor Industrial Grinder
Cat No: 8123WD, HP: 3/4, Volts: 460, Phase: 3, Amps: 7, Cycle: 60, RPM: 3450, Frame: 524M, Serial No: 581, Spec No: C8-267-13. Notes from Owner: Used for sharpening tool steel, fine stone

7513
Hypertherm Hydefinition Plasma HD-1070
Stock #: 078016, Serial #: 078-308. Notes from Owner: Got this unit w/ a burn table I purchased and never used it. Worked when it shipped.

7514
Delta Drill Press
Model: 5K672-F, HP 1/2, RPM: 1140, Phase 1, Hz: 60, FR: J56, Duty: Cont., Rise: 55Notes from Owner: Works loose.

7515
Delta Drill Press
Model No: 62-110 M1254E1050JP, Serial No: 113-3836, HP: 1/3, Volts: 115/230, RPM: 1725, Cy: 60, Phase: 1. Notes from Owner: Works loose


7517
Swisher Surface Grinder
Notes from Owner: We ground tool steel and punch bases with this

7518
Miller Welder Model MP-65E - 650 Deltaweld
Notes from Owner: Used this machine for a submerged arc welder

7519
Hobart Cyber-Wave 3005 Welder
Notes from Owner: Never used in production, was set up to robot weld IGGA Stainless Steel Tank but never did.

7520
Oster Pipe Master 655
2" Pipe & Bolt Machine w/ Tooling; 120 Volts, Ser No: ACD3281. Notes from Owner: Pipe and bolt threader, works well. Up to 1" Bolt

7521
Jet Hydraulic Pipe Bender w/ Tooling JHPB-30
Model No: JHPB-30, Stock No: 331910, Max Bending Capacity: 3" Schedule 40, Notes from Owner: Tried this but was too slow for production

7522
Bridgeport Alliant Mill
Needs Motor. See Photos for Data Plate Details

7523
Miller Deltaweld 452 CV/DC
w/ Miller Go Series 24V Wire Feeder; Serial No: KG149882, Stock No: 131778-01-21, Model D-64. Notes from Owner: Dual Feeder, welds very well

7524
Miller Dimension 452 CC/CV-DC Welder - Wire Feeder
Serial No:KG220968, Stock No. 903255, Phase 3, 230/460/575 Volts, Amperes: 90/45/36, KW 22.3, 60 Hz. Notes from Owner: Welds very well. This machine welds Mig-Stick and TIG (No Tig Torch w/ Machine)

7525
Lincoln Idealarc R3R-400 Welder
Model R3R-400, Code No: 8478, Serial No: AC519092. Notes from Owner: Very Smooth Welding Machine. A lot of people have passed Oklahoma State Steam Card Tests on this machine.

7526
Deltaweld 450 Welder-Needs Repair/Parts Only
Notes from Owner: Smoked when started and never fixed

7527
Ransome Welding Positioner Size 5-P 500lb Capacity
Size No: 5-P, Serial No: 134366, Capacity: 500lbs. Voltage 110, Phase 1, Cycle: 6. Notes from Owner: Used for welding pipe spools, etc.

7527
Miller Deltaweld 450 w/ Wire Feeder
Notes from Owner: New Capacitors. Welds Good.

7528
Compression Pump
Model # 650692-G43, Serial No: H918804. Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7529
Compression Pump
Model #: 650689, Serial #: A-8131-02Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7530
Compression Pump
Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7531
Compression Pump
Model #: 650692-G43-B, Serial#: 10103 001. Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7532
Baldor Grinder Buffer
3 HP, 115 Volts, 3600 RPM, 60 Hz, 3.1 Amps, Cat No 612R, Ser # W3-8


7534
Utility Ball-Bearing Grinder-Buffer
3 HP, 440 Volts, 1750 RPM, 60 Cycle, 4.2 Amps, Model No: 500, Serial # 238326


7536
Filtration System
Unused Condition






7542
Tennsmith Angle Notcher
Model: TN, Serial #: 18445, Capacity: 16 Gauge Mild Steel



8874
Empire Super Blast Sand Blasting Pot
Model Super-650-6p Serial # P-15401

8875
Omnibar 65FS Bar Feeder
4 Rollers , Sameca power unit with rear stand

8876
Hypertherm HT40 Plasma Cutting System
3-Phase 60 hz, 208/230 volt, 33/30 mp




8881
22" 4-Jaw Lathe Chuck
Approx 22" Diameter

8882
8" 3-Jaw Lathe Chuck
Approx 8" Diameter

8883
8" 3-Jaw Lathe Chuck
Approx 8" Diameter

8884
8" 3-Jaw Lathe Chuck
Approx 8" Diameter

8885
8" 3 Jaw Lathe Chuck
Approx 8" Diameter

8886
8" 3 Jaw Lathe Chuck
Approx 8" Diameter

8887
Signode Metal Banding Machine w/ Fasteners, Tools
Two boxes of fasteners and crimping tools

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

MITCHCO - MANUFACTURING - FABRICATION SHOP LIQUIDATION

Mr. Ed's Auction Company

Mr. Ed's Auction Company


Contact:
Phone:
Sale Location
2104 N Ash
Ponca City, OK 74601
Sale Dates and Times
Tuesday Jun 14, 2022 Completed
Sale Terms and Conditions
10% Buyer's premium will be added to final sale price for online winning bids. Inventory must be paid for with cash, credit card or wire transfer. 3% Convenience Fee will apply to all credit card charges that exceed $1,000. If you plan to bid off site during the simulcast auction, you will need to pre-register and be pre-approved prior to the start of the auction at 10:00 am. 1. No sale shall be invalidated by reason of any defect of the lot or inaccuracy in any of the lots by reason of their being incorrectly described by the Auctioneer/Staff or elsewhere and no liability shall be by the Auctioneers/Staff in respect of any such faults or errors. Advertising information has been prepared only as a guide based on information from sources generally believed to be reliable and from the consignor but the accuracy thereof cannot be guaranteed or warranted by the Auctioneers. Bidder acknowledges that it is his responsibility to inspect all equipment and to make his own inquiries. 2. Unless prior arrangements are made, miscellaneous items left after 7 days following Purchaser's payment will be considered abandoned and sold for storage. Titled vehicles will be charged $25.00 per day following the Auction. Vehicles left outside the security gate longer than 1 week following the auction will be towed at owners' expense. 3. The highest bidder shall be the purchaser and no bidder shall retract his bid. ALL BIDS MADE IN U.S. DOLLARS. All sales are final. All buyers must register and agree to the following terms and conditions prior to bidding. If the Auctioneer determines that any bid is not commensurate with the value of the article offered, he may reject the same and withdraw the item from the auction, and having acknowledged an opening bid, he decides that an advance is not sufficient, he may reject the advance. Auctioneer reserves the right to bid on behalf of Buyers, Seller and/or Secured parties. 4. Any dispute arising as to any bid shall be settled by the Auctioneers at their sole discretion and at the Auctioneers' discretion, the Auctioneer may immediately put the lot in the dispute up again for sale with the original purchaser responsible for sale fees, no sale fees and any deficit in sale price 5. The Auctioneers shall have the right to consolidate or break down lots, or to offer a complete facility as a single lot. Auctioneers reserve the right not to acknowledge or accept any bid even if it is merely a fractional advance over the preceding bid. The Auctioneers retain the right, without notice, to withdraw any lot or lots, prior to sale of said lots. 6. The Auctioneers assume no responsibility for any liability once bid is accepted. Merchandise "as is" with all faults. Purchasers are advised to pre-arrange for insurance coverage of their purchases. Ownership title passes upon the fall of the Auctioneer's gavel and/or ending of online bid and thereafter the property is at the risk of the buyer and neither the seller, nor the auctioneer shall be responsible for loss or damage. 7. Titles are processed in accordance with the Oklahoma DMV. Rules in the State of Oklahoma may differ from rules in other states and may require further processing by the buyer. Units that do not require titles in Oklahoma may have such requirements in other states. The auctioneer/owner is not responsible and may not be able to in some cases provide documentation required by other states. Bankruptcy Assets will be transfered via Bill of Sale. 8. All applicable sales or excise taxes will be added to the purchase price of all taxable items unless the buyer files with the Auctioneers proof of exemption from all such taxes in a form satisfactory to the auctioneers. If there is a buyer's premium, the tax is applied after the combined total. 9. The purchaser shall not be entitled to possession of any of his purchases until total purchase price of all his purchases has been fully paid and in the event the purchaser fails to pay the full purchase price for any lot within the prescribed time or fails to comply with any other terms of sale, the Auctioneers shall retain the possessory lien on all lots of the purchaser, and have the right to resell such lots by public or private sale without notice of any kind to the Purchaser. Any deficiency arising upon the resale, together with all expenses thereof, shall be paid by the purchaser. Any auction deposit shall be retained by the Auctioneers for application against such deficiency. Forfeiture of the deposit does not release the buyer from full payment. 10. All cost and the responsibility of such removal shall be borne by the purchaser. The Auctioneers reserve the right to require proof of adequate insurance coverage from any purchaser of lots requiring dismantling, rigging or hot cutting. Purchaser agrees to indemnify and save harmless both the Consignor and Auctioneers against any damage caused by the act of Purchaser and/or his agents in connection with the dismantling or removal of any lot. If removal of said lots requires licensed contractors, buyer agrees to the hiring of said contractor who can provide proof of adequate insurance coverage. 11. All lots must be removed within the time announced or posted at sale. At Purchasers' sole cost and risk, and only in a manner approved by the Auctioneers. If for any reason the purchaser fails to remove any lot within the time specified, the lot shall be deemed abandoned and the Auctioneers, at their sole discretion, may resell per paragraph 8 above or removed and store the said lots at Purchasers' sole risk and expense. In addition, Purchaser shall be liable for any rent incurred or damages suffered by the Auctioneers because of Purchasers' failure to remove any lot within 10 days. 12. If for any reason whatsoever, the Auctioneers' are unable to deliver any lot, or any necessary documentation required in respect of any lot, the Auctioneers' sole liability, if any shall be the return of any monies paid on such lot. 13. Except as herein set out there shall be no guarantees or warranties expressed or implied, statutory or otherwise of any nature whatsoever. Each and every item will be sold "As Is, Where Is", with all faults. ALL SALES ARE FINAL. CONDITION OF LOTS: Bidders shall examine or inspect items prior to the day of the auction. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. neither Seller nor Mr Ed's Auction Company MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET. Mr Ed's Auction Company & Seller EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No allowance will be made for errors in cataloging, genuineness, defects, or imperfections not noted. CLAIMS: No claims will be allowed after the said item has been removed from the premises. 14. Bidder acknowledges that an auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at his own risk with notice of the condition of the premises, the activities on the premises and the conduct of the third parties and the Bidder shall so advise his agents and employees. No person shall have any claim against the auctioneers, their agents, employees, sellers, owners or principals for any injuries sustained or for damages to or loss of property which may occur from any causes whatsoever.
Listing Details
WELDING, MANUFACTURING AND FABRICATION SHOP LIQUIDATION AUCTION

7500
Colchester Harrison GE Fanuc 1460 XS
Model: Alpha 1460XS, Serial No.: X3S040, Built in 2007, Spindle RPM: 2250, Wiring Diagram: BFE-M01-T06/A, 230 Volts, 3-Phase, 60 Hertz, 40 Amps. Notes from Owner: Serviced approx March 1st, 2022. Checked out well, very tight. Have backup setup progr...

7501
Monarch Mod N 25 Industrial Lathe w/ Tooling
Model N25, Spec: MIL-L-4370, Serial No: 39293, Order No: AF 30227, Stock No.: 8100-446510, Catalogue Size: 5"N, MFR's Serial No.: 39293, Actual Swing: 30.5", Distance Between Centers: 96", Built 12-1953. Notes from Owner: 30.5" Swing and 96" between...

7502
Milltronics Partner VIII Comet VMC 1250 w/ Tooling
Model: MC-1000G, A.C. 220V =/- 10%, Phase: 3, Freq. 50/60 Hz, Power: 25 KVA, Air 6.5 K, 6200KG, Notes from Owner: Tool Changer 25, Open Table Checked approx Jan 15, 2022

7503
U.S. Industrial Machinery Shear
Model US 10375, Serial # J 2002-018, Notes from Owner: 3/8" C.S. Max, 10' Length. Will cut down to 20ga. CS Blade is still on 1st turn (3 more to go). A little dull. 1st 2' for thin material. Very Nice Machine

7504
Montgomery 8' Roller
Model No.: 9625, Serial No.: 081453, Approx Weight: 9500 lbs, Total HP: 10, Voltage: 230, 26 Amps, 60 Hz, Notes from Owner: Hydraulic prop end, initial pinch w/ digital read out, back roll and adjustable front. Back rolls well, 8' of 1/4", 4' 7/16....

7505
Acorn Table 6' x 8'
Notes from Owner: Fit up and tack on table, no tooling. We used wedges to square, very fast fit up.

7506
8' x 20' Burn Table-High Definition
Mach No: 296-81, Model No.: CM56-96, Serial No.: 72-4-072, Notes from Owner: Updated Hypertherm edge T 1, New gears, servo & racks 8-10 years ago. Nesting program w/ height controls, will cut 8" plate w/ oxy propylene and 1/2 " well with 1250 Hypert...

7507
Kearney & Trecker Mill
Type: N204X, Ser#: RE82062, 3HP, 1725 RPM, 3 Phase, 60CV, 480 Volts, 5.2 Amps Notes from Owner: This machine was replaced with CNC mill, worked well last time used which was approx 10 years ago.

7508
Rotary Indexing Table
Notes from Owner: Mod PDGH, Ser 505, Electric Rotopic

7509
Marvel Series 8 Mark I Band Saw w/ 2 Roller Tables
Series: 8, Model No: MK 1, Serial No.: 821434-W-LC. Notes from Owner: Marvel High Column - (24'H x 18' D) Blade is 156" x 1" x .035 x 416

7510
Do All Model C9V Metal Cutting Band Saw
Model: C-9V, Serial No.: 296-72156, Volt: 220, Inst Amps: 30.0, Normal Amps: 4.8, Cycle: 60, Phase: 3. Notes from Owner: Never Ran Saw, Tried to start but it would not.

7511
Ansul Fire Suppression Vent A Hood for Food Truck
Model: HMVH-23, Serial No.: HM33690, Volts: 230, Phase: 1, Hz: 60. Notes from Owner: Used once as a vent @ trade show. Never installed

7512
Baldor Industrial Grinder
Cat No: 8123WD, HP: 3/4, Volts: 460, Phase: 3, Amps: 7, Cycle: 60, RPM: 3450, Frame: 524M, Serial No: 581, Spec No: C8-267-13. Notes from Owner: Used for sharpening tool steel, fine stone

7513
Hypertherm Hydefinition Plasma HD-1070
Stock #: 078016, Serial #: 078-308. Notes from Owner: Got this unit w/ a burn table I purchased and never used it. Worked when it shipped.

7514
Delta Drill Press
Model: 5K672-F, HP 1/2, RPM: 1140, Phase 1, Hz: 60, FR: J56, Duty: Cont., Rise: 55Notes from Owner: Works loose.

7515
Delta Drill Press
Model No: 62-110 M1254E1050JP, Serial No: 113-3836, HP: 1/3, Volts: 115/230, RPM: 1725, Cy: 60, Phase: 1. Notes from Owner: Works loose


7517
Swisher Surface Grinder
Notes from Owner: We ground tool steel and punch bases with this

7518
Miller Welder Model MP-65E - 650 Deltaweld
Notes from Owner: Used this machine for a submerged arc welder

7519
Hobart Cyber-Wave 3005 Welder
Notes from Owner: Never used in production, was set up to robot weld IGGA Stainless Steel Tank but never did.

7520
Oster Pipe Master 655
2" Pipe & Bolt Machine w/ Tooling; 120 Volts, Ser No: ACD3281. Notes from Owner: Pipe and bolt threader, works well. Up to 1" Bolt

7521
Jet Hydraulic Pipe Bender w/ Tooling JHPB-30
Model No: JHPB-30, Stock No: 331910, Max Bending Capacity: 3" Schedule 40, Notes from Owner: Tried this but was too slow for production

7522
Bridgeport Alliant Mill
Needs Motor. See Photos for Data Plate Details

7523
Miller Deltaweld 452 CV/DC
w/ Miller Go Series 24V Wire Feeder; Serial No: KG149882, Stock No: 131778-01-21, Model D-64. Notes from Owner: Dual Feeder, welds very well

7524
Miller Dimension 452 CC/CV-DC Welder - Wire Feeder
Serial No:KG220968, Stock No. 903255, Phase 3, 230/460/575 Volts, Amperes: 90/45/36, KW 22.3, 60 Hz. Notes from Owner: Welds very well. This machine welds Mig-Stick and TIG (No Tig Torch w/ Machine)

7525
Lincoln Idealarc R3R-400 Welder
Model R3R-400, Code No: 8478, Serial No: AC519092. Notes from Owner: Very Smooth Welding Machine. A lot of people have passed Oklahoma State Steam Card Tests on this machine.

7526
Deltaweld 450 Welder-Needs Repair/Parts Only
Notes from Owner: Smoked when started and never fixed

7527
Ransome Welding Positioner Size 5-P 500lb Capacity
Size No: 5-P, Serial No: 134366, Capacity: 500lbs. Voltage 110, Phase 1, Cycle: 6. Notes from Owner: Used for welding pipe spools, etc.

7527
Miller Deltaweld 450 w/ Wire Feeder
Notes from Owner: New Capacitors. Welds Good.

7528
Compression Pump
Model # 650692-G43, Serial No: H918804. Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7529
Compression Pump
Model #: 650689, Serial #: A-8131-02Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7530
Compression Pump
Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7531
Compression Pump
Model #: 650692-G43-B, Serial#: 10103 001. Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7532
Baldor Grinder Buffer
3 HP, 115 Volts, 3600 RPM, 60 Hz, 3.1 Amps, Cat No 612R, Ser # W3-8


7534
Utility Ball-Bearing Grinder-Buffer
3 HP, 440 Volts, 1750 RPM, 60 Cycle, 4.2 Amps, Model No: 500, Serial # 238326


7536
Filtration System
Unused Condition






7542
Tennsmith Angle Notcher
Model: TN, Serial #: 18445, Capacity: 16 Gauge Mild Steel



8874
Empire Super Blast Sand Blasting Pot
Model Super-650-6p Serial # P-15401

8875
Omnibar 65FS Bar Feeder
4 Rollers , Sameca power unit with rear stand

8876
Hypertherm HT40 Plasma Cutting System
3-Phase 60 hz, 208/230 volt, 33/30 mp




8881
22" 4-Jaw Lathe Chuck
Approx 22" Diameter

8882
8" 3-Jaw Lathe Chuck
Approx 8" Diameter

8883
8" 3-Jaw Lathe Chuck
Approx 8" Diameter

8884
8" 3-Jaw Lathe Chuck
Approx 8" Diameter

8885
8" 3 Jaw Lathe Chuck
Approx 8" Diameter

8886
8" 3 Jaw Lathe Chuck
Approx 8" Diameter

8887
Signode Metal Banding Machine w/ Fasteners, Tools
Two boxes of fasteners and crimping tools

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
MITCHCO - MANUFACTURING - FABRICATION SHOP LIQUIDATION
 Live Auction w/Online Bidding
Auction Date(s)
Tuesday Jun 14, 2022 Completed
Auction Location

Ponca City, OK 74601
Company
Mr. Ed's Auction Company

Website: www.mredsauction.com

Listing Terms and Conditions
10% Buyer's premium will be added to final sale price for online winning bids. Inventory must be paid for with cash, credit card or wire transfer. 3% Convenience Fee will apply to all credit card charges that exceed $1,000. If you plan to bid off site during the simulcast auction, you will need to pre-register and be pre-approved prior to the start of the auction at 10:00 am. 1. No sale shall be invalidated by reason of any defect of the lot or inaccuracy in any of the lots by reason of their being incorrectly described by the Auctioneer/Staff or elsewhere and no liability shall be by the Auctioneers/Staff in respect of any such faults or errors. Advertising information has been prepared only as a guide based on information from sources generally believed to be reliable and from the consignor but the accuracy thereof cannot be guaranteed or warranted by the Auctioneers. Bidder acknowledges that it is his responsibility to inspect all equipment and to make his own inquiries. 2. Unless prior arrangements are made, miscellaneous items left after 7 days following Purchaser's payment will be considered abandoned and sold for storage. Titled vehicles will be charged $25.00 per day following the Auction. Vehicles left outside the security gate longer than 1 week following the auction will be towed at owners' expense. 3. The highest bidder shall be the purchaser and no bidder shall retract his bid. ALL BIDS MADE IN U.S. DOLLARS. All sales are final. All buyers must register and agree to the following terms and conditions prior to bidding. If the Auctioneer determines that any bid is not commensurate with the value of the article offered, he may reject the same and withdraw the item from the auction, and having acknowledged an opening bid, he decides that an advance is not sufficient, he may reject the advance. Auctioneer reserves the right to bid on behalf of Buyers, Seller and/or Secured parties. 4. Any dispute arising as to any bid shall be settled by the Auctioneers at their sole discretion and at the Auctioneers' discretion, the Auctioneer may immediately put the lot in the dispute up again for sale with the original purchaser responsible for sale fees, no sale fees and any deficit in sale price 5. The Auctioneers shall have the right to consolidate or break down lots, or to offer a complete facility as a single lot. Auctioneers reserve the right not to acknowledge or accept any bid even if it is merely a fractional advance over the preceding bid. The Auctioneers retain the right, without notice, to withdraw any lot or lots, prior to sale of said lots. 6. The Auctioneers assume no responsibility for any liability once bid is accepted. Merchandise "as is" with all faults. Purchasers are advised to pre-arrange for insurance coverage of their purchases. Ownership title passes upon the fall of the Auctioneer's gavel and/or ending of online bid and thereafter the property is at the risk of the buyer and neither the seller, nor the auctioneer shall be responsible for loss or damage. 7. Titles are processed in accordance with the Oklahoma DMV. Rules in the State of Oklahoma may differ from rules in other states and may require further processing by the buyer. Units that do not require titles in Oklahoma may have such requirements in other states. The auctioneer/owner is not responsible and may not be able to in some cases provide documentation required by other states. Bankruptcy Assets will be transfered via Bill of Sale. 8. All applicable sales or excise taxes will be added to the purchase price of all taxable items unless the buyer files with the Auctioneers proof of exemption from all such taxes in a form satisfactory to the auctioneers. If there is a buyer's premium, the tax is applied after the combined total. 9. The purchaser shall not be entitled to possession of any of his purchases until total purchase price of all his purchases has been fully paid and in the event the purchaser fails to pay the full purchase price for any lot within the prescribed time or fails to comply with any other terms of sale, the Auctioneers shall retain the possessory lien on all lots of the purchaser, and have the right to resell such lots by public or private sale without notice of any kind to the Purchaser. Any deficiency arising upon the resale, together with all expenses thereof, shall be paid by the purchaser. Any auction deposit shall be retained by the Auctioneers for application against such deficiency. Forfeiture of the deposit does not release the buyer from full payment. 10. All cost and the responsibility of such removal shall be borne by the purchaser. The Auctioneers reserve the right to require proof of adequate insurance coverage from any purchaser of lots requiring dismantling, rigging or hot cutting. Purchaser agrees to indemnify and save harmless both the Consignor and Auctioneers against any damage caused by the act of Purchaser and/or his agents in connection with the dismantling or removal of any lot. If removal of said lots requires licensed contractors, buyer agrees to the hiring of said contractor who can provide proof of adequate insurance coverage. 11. All lots must be removed within the time announced or posted at sale. At Purchasers' sole cost and risk, and only in a manner approved by the Auctioneers. If for any reason the purchaser fails to remove any lot within the time specified, the lot shall be deemed abandoned and the Auctioneers, at their sole discretion, may resell per paragraph 8 above or removed and store the said lots at Purchasers' sole risk and expense. In addition, Purchaser shall be liable for any rent incurred or damages suffered by the Auctioneers because of Purchasers' failure to remove any lot within 10 days. 12. If for any reason whatsoever, the Auctioneers' are unable to deliver any lot, or any necessary documentation required in respect of any lot, the Auctioneers' sole liability, if any shall be the return of any monies paid on such lot. 13. Except as herein set out there shall be no guarantees or warranties expressed or implied, statutory or otherwise of any nature whatsoever. Each and every item will be sold "As Is, Where Is", with all faults. ALL SALES ARE FINAL. CONDITION OF LOTS: Bidders shall examine or inspect items prior to the day of the auction. ALL ITEMS ARE SOLD AS IS, WHERE IS AND WITH ALL FAULTS. neither Seller nor Mr Ed's Auction Company MAKES ANY WARRANTY, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY, VALUE OR CONDITION OF ANY ASSET. Mr Ed's Auction Company & Seller EXPRESSLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No allowance will be made for errors in cataloging, genuineness, defects, or imperfections not noted. CLAIMS: No claims will be allowed after the said item has been removed from the premises. 14. Bidder acknowledges that an auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at his own risk with notice of the condition of the premises, the activities on the premises and the conduct of the third parties and the Bidder shall so advise his agents and employees. No person shall have any claim against the auctioneers, their agents, employees, sellers, owners or principals for any injuries sustained or for damages to or loss of property which may occur from any causes whatsoever.
WELDING, MANUFACTURING AND FABRICATION SHOP LIQUIDATION AUCTION

7500
Colchester Harrison GE Fanuc 1460 XS
Model: Alpha 1460XS, Serial No.: X3S040, Built in 2007, Spindle RPM: 2250, Wiring Diagram: BFE-M01-T06/A, 230 Volts, 3-Phase, 60 Hertz, 40 Amps. Notes from Owner: Serviced approx March 1st, 2022. Checked out well, very tight. Have backup setup progr...

7501
Monarch Mod N 25 Industrial Lathe w/ Tooling
Model N25, Spec: MIL-L-4370, Serial No: 39293, Order No: AF 30227, Stock No.: 8100-446510, Catalogue Size: 5"N, MFR's Serial No.: 39293, Actual Swing: 30.5", Distance Between Centers: 96", Built 12-1953. Notes from Owner: 30.5" Swing and 96" between...

7502
Milltronics Partner VIII Comet VMC 1250 w/ Tooling
Model: MC-1000G, A.C. 220V =/- 10%, Phase: 3, Freq. 50/60 Hz, Power: 25 KVA, Air 6.5 K, 6200KG, Notes from Owner: Tool Changer 25, Open Table Checked approx Jan 15, 2022

7503
U.S. Industrial Machinery Shear
Model US 10375, Serial # J 2002-018, Notes from Owner: 3/8" C.S. Max, 10' Length. Will cut down to 20ga. CS Blade is still on 1st turn (3 more to go). A little dull. 1st 2' for thin material. Very Nice Machine

7504
Montgomery 8' Roller
Model No.: 9625, Serial No.: 081453, Approx Weight: 9500 lbs, Total HP: 10, Voltage: 230, 26 Amps, 60 Hz, Notes from Owner: Hydraulic prop end, initial pinch w/ digital read out, back roll and adjustable front. Back rolls well, 8' of 1/4", 4' 7/16....

7505
Acorn Table 6' x 8'
Notes from Owner: Fit up and tack on table, no tooling. We used wedges to square, very fast fit up.

7506
8' x 20' Burn Table-High Definition
Mach No: 296-81, Model No.: CM56-96, Serial No.: 72-4-072, Notes from Owner: Updated Hypertherm edge T 1, New gears, servo & racks 8-10 years ago. Nesting program w/ height controls, will cut 8" plate w/ oxy propylene and 1/2 " well with 1250 Hypert...

7507
Kearney & Trecker Mill
Type: N204X, Ser#: RE82062, 3HP, 1725 RPM, 3 Phase, 60CV, 480 Volts, 5.2 Amps Notes from Owner: This machine was replaced with CNC mill, worked well last time used which was approx 10 years ago.

7508
Rotary Indexing Table
Notes from Owner: Mod PDGH, Ser 505, Electric Rotopic

7509
Marvel Series 8 Mark I Band Saw w/ 2 Roller Tables
Series: 8, Model No: MK 1, Serial No.: 821434-W-LC. Notes from Owner: Marvel High Column - (24'H x 18' D) Blade is 156" x 1" x .035 x 416

7510
Do All Model C9V Metal Cutting Band Saw
Model: C-9V, Serial No.: 296-72156, Volt: 220, Inst Amps: 30.0, Normal Amps: 4.8, Cycle: 60, Phase: 3. Notes from Owner: Never Ran Saw, Tried to start but it would not.

7511
Ansul Fire Suppression Vent A Hood for Food Truck
Model: HMVH-23, Serial No.: HM33690, Volts: 230, Phase: 1, Hz: 60. Notes from Owner: Used once as a vent @ trade show. Never installed

7512
Baldor Industrial Grinder
Cat No: 8123WD, HP: 3/4, Volts: 460, Phase: 3, Amps: 7, Cycle: 60, RPM: 3450, Frame: 524M, Serial No: 581, Spec No: C8-267-13. Notes from Owner: Used for sharpening tool steel, fine stone

7513
Hypertherm Hydefinition Plasma HD-1070
Stock #: 078016, Serial #: 078-308. Notes from Owner: Got this unit w/ a burn table I purchased and never used it. Worked when it shipped.

7514
Delta Drill Press
Model: 5K672-F, HP 1/2, RPM: 1140, Phase 1, Hz: 60, FR: J56, Duty: Cont., Rise: 55Notes from Owner: Works loose.

7515
Delta Drill Press
Model No: 62-110 M1254E1050JP, Serial No: 113-3836, HP: 1/3, Volts: 115/230, RPM: 1725, Cy: 60, Phase: 1. Notes from Owner: Works loose

7516

7517
Swisher Surface Grinder
Notes from Owner: We ground tool steel and punch bases with this

7518
Miller Welder Model MP-65E - 650 Deltaweld
Notes from Owner: Used this machine for a submerged arc welder

7519
Hobart Cyber-Wave 3005 Welder
Notes from Owner: Never used in production, was set up to robot weld IGGA Stainless Steel Tank but never did.

7520
Oster Pipe Master 655
2" Pipe & Bolt Machine w/ Tooling; 120 Volts, Ser No: ACD3281. Notes from Owner: Pipe and bolt threader, works well. Up to 1" Bolt

7521
Jet Hydraulic Pipe Bender w/ Tooling JHPB-30
Model No: JHPB-30, Stock No: 331910, Max Bending Capacity: 3" Schedule 40, Notes from Owner: Tried this but was too slow for production

7522
Bridgeport Alliant Mill
Needs Motor. See Photos for Data Plate Details

7523
Miller Deltaweld 452 CV/DC
w/ Miller Go Series 24V Wire Feeder; Serial No: KG149882, Stock No: 131778-01-21, Model D-64. Notes from Owner: Dual Feeder, welds very well

7524
Miller Dimension 452 CC/CV-DC Welder - Wire Feeder
Serial No:KG220968, Stock No. 903255, Phase 3, 230/460/575 Volts, Amperes: 90/45/36, KW 22.3, 60 Hz. Notes from Owner: Welds very well. This machine welds Mig-Stick and TIG (No Tig Torch w/ Machine)

7525
Lincoln Idealarc R3R-400 Welder
Model R3R-400, Code No: 8478, Serial No: AC519092. Notes from Owner: Very Smooth Welding Machine. A lot of people have passed Oklahoma State Steam Card Tests on this machine.

7526
Deltaweld 450 Welder-Needs Repair/Parts Only
Notes from Owner: Smoked when started and never fixed

7527
Ransome Welding Positioner Size 5-P 500lb Capacity
Size No: 5-P, Serial No: 134366, Capacity: 500lbs. Voltage 110, Phase 1, Cycle: 6. Notes from Owner: Used for welding pipe spools, etc.

7527
Miller Deltaweld 450 w/ Wire Feeder
Notes from Owner: New Capacitors. Welds Good.

7528
Compression Pump
Model # 650692-G43, Serial No: H918804. Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7529
Compression Pump
Model #: 650689, Serial #: A-8131-02Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7530
Compression Pump
Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7531
Compression Pump
Model #: 650692-G43-B, Serial#: 10103 001. Notes from Owner: Used for pumping grease in drilling bits. Could be used for glue, etc.

7532
Baldor Grinder Buffer
3 HP, 115 Volts, 3600 RPM, 60 Hz, 3.1 Amps, Cat No 612R, Ser # W3-8

7533

7534
Utility Ball-Bearing Grinder-Buffer
3 HP, 440 Volts, 1750 RPM, 60 Cycle, 4.2 Amps, Model No: 500, Serial # 238326

7535

7536
Filtration System
Unused Condition

7537

7538

7539

7540

7541

7542
Tennsmith Angle Notcher
Model: TN, Serial #: 18445, Capacity: 16 Gauge Mild Steel

7543

8873

8874
Empire Super Blast Sand Blasting Pot
Model Super-650-6p Serial # P-15401

8875
Omnibar 65FS Bar Feeder
4 Rollers , Sameca power unit with rear stand

8876
Hypertherm HT40 Plasma Cutting System
3-Phase 60 hz, 208/230 volt, 33/30 mp

8878

8879

8880

8881
22" 4-Jaw Lathe Chuck
Approx 22" Diameter

8882
8" 3-Jaw Lathe Chuck
Approx 8" Diameter

8883
8" 3-Jaw Lathe Chuck
Approx 8" Diameter

8884
8" 3-Jaw Lathe Chuck
Approx 8" Diameter

8885
8" 3 Jaw Lathe Chuck
Approx 8" Diameter

8886
8" 3 Jaw Lathe Chuck
Approx 8" Diameter

8887
Signode Metal Banding Machine w/ Fasteners, Tools
Two boxes of fasteners and crimping tools