TIMED ONLINE ONLY - Lamb Retirement Auction - Whitehorse, SD
Previous Page Listing ID#: 1411109

Auction Location
25686 BIA-2 Whitehorse SD 57661
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Wednesday Jun 22, 08:00 AM
Bidding Ends: Wednesday Jun 29, 12:00 PM
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Pifer's Auction & Realty

Website: www.pifers.com

GoToAuction.com ID#: 6142
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
AUCTION TERMS AND CONDITIONS
PLEASE REVIEW AND AGREE BEFORE PLACING ANY BIDS

All items are sold “as is”. Buyer(s) are encouraged to inspect all equipment before purchasing. All buyers must register with the clerk prior to bidding. Buyers are responsible for removing purchased items from the property within one week unless special arrangements have been made. Neither Pifer’s nor the sellers are responsible for the purchased items once they are sold. Buyer (s) agree to hold Pifer’s and sellers harmless and are not responsible for accidents. All items must be paid for in full prior to removal from property. All purchases are made in US dollars. All non-U.S. citizens must use a U.S. based bank to clear all funds for full payment. All statements made at the auction take precedence over all printed materials. All absentee bidders are encouraged to leave bids with auction personnel because of volatile cell phone coverage. Contact Pifer’s at 877-700-4099 to register prior to auction.
ALL BIDDERS: All items offered at a Pifer’s Auction are represented as these items are presented to Pifer’s Auctioneers and/or associate agents by the seller. Pifer’s Auctioneers has provided general equipment information to the buyers based upon a limited inspection completed by a Pifer’s Auction agent. Pifer’s has not inspected any aspects or components of the equipment other than those general details provided in the specific item description. Unless expressly stated, Pifer’s makes no representations or warranties, express or implied, concerning the functionality; overall general condition of body, engine, or transmission; year, make, &/or model; overall dimensions; or any defects found within any item offered at a Pifer’s Auction. Buyers are strongly advised to perform a detailed inspection and further due diligence of general information of the equipment prior to bidding.
Pifer’s Auctioneers and/or associate agents have not tested any particular item or piece of equipment under load nor has Pifer’s operated any equipment in all available gears. Pifer’s makes no representations or warranties that equipment is fully functional under manufacturers’ specifications.
Dimensions of equipment or other items sold at a Pifer’s Auction are provided as a general guide to buyers and should be considered estimated dimensions only. Point to point measurements vary depending upon different considerations of the starting point and ending point of the particular measurement (i.e. Wheel Base, Trailer Side Wall Height, Unit Length, etc). All measurement should be verified by the buyer and shall not be relied upon for transportation purposes. It is the buyer’s responsibility to measure all loads prior to leaving the auction site to ensure safe transport of the equipment to its destination.
All photos used to present each item are at the sole discretion of Pifer’s Auctioneers and may not be indicative of the item’s quality and condition, or reveal all components, variable angles, defects, and areas of limited visibility. Buyers are strongly advised to complete a full inspection of the equipment prior to bidding.
ABANDONED PROPERTY: All items must be removed within 10 business days of the final close of that auction. Unless mutually agreed upon with Pifer’s Auctioneers and/or the seller, a $25/day storage fee (not to exceed $1000) will be charged to each item and must be paid in full to Pifer’s Auctioneers (which will be remitted to the owner of the land where the items were stored) prior to buyer taking possession. If items are abandoned after 60 days, Pifer’s Auctioneers reserves the right to re-sell the items or dispose of the items at their sole discretion.
ONLINE/PHONE BIDDERS: A 5% buyer’s premium will apply to all online and over the phone purchases, not to exceed $1000 per successful lot. To ensure bidding accuracy and guarantee your bid is placed, we encourage you to attend the auction in person if you are able. Pifer’s is NOT responsible for connection or computer issues during the live bidding process. All phone bidders are encouraged to leave bids with auction personnel because of volatile cell phone coverage. Contact Pifer’s at 877-700-4099 to register prior to auction.
ONLINE & ABSENTEE BIDDERS:
All absentee bids on file with Pifer’s must comply with the following terms and conditions:
  1. All absentee bids must be submitted by registered bidder.
  2. All bids are executed in competition with the bidders in attendance on an alternate basis as if the bidder were present at the auction and the purchase will be obtained at the lowest bid possible.
  3. All bidders agree to be bound by Pifer’s bidder registration agreement.
  4. All statements made the day of the auction take precedence over all printed materials. All items are sold “As-IS, Where-IS”.
  5. Pifer’s does not guarantee the year, condition, description or suitability of any item.
  6. All bidders acknowledge that the absentee bid is accepted on the expressed condition that the bidder will not have any claim against the auctioneer or its employees if the auctioneer fails, for any reason, to bid on behalf of the bidder.
  7. Pifer’s does not guarantee that the bid will be made however will do everything possible on the date of the auction to represent the absentee bidder.
  8. Absentee bid(s) must be received 24 hours in advance of auction.
  9. All absentee bids will have a buyer’s premium of 5% of purchase price, with a maximum of $1000.00 per successful lot.
  10. Minimum acceptable bid on any one item or lot is $1000.
Online Bidders, Phone Bidders, and Absentee Bidders agree to hold Pifer’s harmless in the event that a bid is not placed to secure a winning bid, or if the bidder has technical issues with any portion of the bidding process, the online bidding website, or personal computer issues.


Sales Tax:
All appropriate state sales tax laws will apply to purchases, these laws may vary depending upon the type of item purchased or the specific tax category that the buyer is in.
CREDIT CARD PAYMENTS WILL INCUR A 4% FEE.
ONLINE AUCTIONS:
Timed Online Only Auctions will begin to close at the time specified for each individual auction. These are considered “Soft Staggered Closings” and the auction will close at a rate of 2 items every 2 minutes. Each lot may remain open until no bids are placed within the last 5 minutes. Each bid placed within the last 5 minutes will extend the bidding to 5 minutes. A bid must survive the final 5-minute timer to be declared successful.
Pifer’s Auctioneers reserves the right to alter or change the closing process at its discretion. Once the auction is over and a winning bidder is declared, the buyer assumes all responsibility for that item. Buyer further agrees to hold Pifer’s Auctioneers, and its client, harmless for all items that are lost, stolen, or damaged. Neither Pifer’s Auctioneers, nor the owner, will agree to any discount or refund for items once the auction is complete. Buyer also assumes all responsibility for transportation, transportation preparation, or any expenses required to prepare items for shipping. Special load-out requirements, dis-assembly, packaging and insurance is the responsibility of the buyer, unless otherwise expressly stated and represented by Pifer’s Auctioneers.
Buyer acknowledges that online bidding and the technology used to accommodate the bidding process may be unreliable. Online Bidders, Phone Bidders, and Absentee Bidders agree to hold Pifer’s harmless in the event that a bid is not placed to secure a winning bid, or if the bidder has technical issues with any portion of the bidding process, the online bidding website, or personal computer issues. Auctioneer and owner(s) reserve the right to accept or reject any bid(s).
Terms & Conditions:
Once bidder accepts the terms and conditions of this auction, said bidder has entered into a legal and binding contract. Bidder agrees to abide by the rules of this auction and will properly make payment and take possession of the items that were successfully purchased. All items are sold “AS-IS, WHERE-IS” with no exceptions.
This sale is managed by Pifer’s Auction & Realty, Kevin Pifer, ND #715. Clerking #534. All statements made the day of the auction take precedence over all printed materials.

Listing Information

1
2014 McCormick MTX-135 T3 Tractor
SN: 5W3CS08190, 16F/12R 4 Speed Powershift Transmission, MFWD, Joystick Loader Controls, 3-Function, Left-Hand Reverser, Differential Lock, Cab Air/Heat, Radio, Three Hydraulics, 540/1000 PTO, 3 Po...

2
1977 International Harvester 1086 Tractor
SN: 18759, Cab, 2WD, 3 Point, No Top Link, , 3 Hydraulics, 540/1000 PTO, 20.8-38 Rear Tires, 11.00-16 Front Tires, Hours Unknown, with DuAl 3100 Front End Loader, 84 in. Bucket, 4 Tine Grapple, IH ...

3
DuAl 3100 Front End Loader
84 in. Bucket, 4 Tine Grapple, IH 1086 Mounts

3
Champion 740 Motor Grader
SN: 740-22-33-10109, 671 Detroit 6 Cylinder Diesel, 14 ft. Moldboard, Hydraulic Angle/Tilt/Slide/Lift, Front Hydraulic Remote, Cab, 14.00-24 Tires, Showing 3,851 Hours *ONE REAR DIFFERENTIAL NEEDS ...

4
2011 Dodge Ram 2500 Pickup
VIN: 3D7TT2CT9BG565924, 5.7 Liter Hemi, Automatic Transmission, 4WD, Power Windows/Locks/Mirrors, Cloth Interior, LT245/75R17 Tires, 8 ft. Bradford Built Flatbed, 5th Wheel Hitch, Dual-Side Storage...

5
2017 Honda Pioneer 1000 UTV
4WD, Limited Edition, Automatic Transmission, Turf Mode, Hill Mode, Sport Mode, Paddle Shift, Front Push-Out Windshield, Half Doors, Front Electric Winch, Rear Receiver, Fox Shocks, 27X11.00R14NHS ...

6
CamoPlast Tatou 4S Tracks
Fits 2011 Honda Foreman 500

7
2001 DCT 8X28GBT Gooseneck Flatbed Trailer
VIN: 4GBG2829311000298, SN: 10298, 28 ft. x 102 in., 24 ft. Wood Deck, 4 ft. Beavertail, Spring Suspension, Tandem Axle, LT235/85R16 Tires, Duals, Steel Wheels, Electric Brakes, Oil-Bath Bearings, ...

8
2001 Featherlite 5320 Livestock Gooseneck Trailer
SN: 4FGL024201H045375, 24 ft. X 80 in., 7,000 lb. Torsion Axles, Tandem Axle, LT235/85R16 Tires, Steel Trailer, Steel Wheels, Rear Swing Gate with Slider, 2 Midgates 1 with Slider, Wood Floor, Curb...

9
1979 Merritt CattleDrive Livestock Cattle Pot
VIN: P79L2218, 45 ft. X 96 in., Tandem Axle, Spring Suspension, 3 Compartment, 11R24.5 Tires, Steel Rims, *Hole in Front Compartment Floor* *Missing Ramps, Gates, Rails*

10
1981 Timpte Flatbed Trailer
40 ft. X 96 in., Tandem Axle, Rear Gooseneck Hitch, Spring Suspension, Steel Wheels, 10.00-20 Tires *BILL OF SALE ONLY*

11
MacDon APT Hydraulic Swing Swather
SN: 213093, Pull-type, 1000 PTO, 31X16.50-15 Tires, A-30 D Head, Steel Rollers, SN: 212983 *HYDROSWING TONGUE DAMAGED*

12
New Holland 116 Haybine Mower-Conditioner
SN: 548077, Pull Type, 16 ft. Head, Rubber Rollers, Hydraulic Swing, Hydraulic Lift, 540 PTO Driven Hydraulic Pump, 31X13.50-15 Tires, *Parts Only*

13
New Holland 116 Haybine Mower-Conditioner
SN:559607, Pull Type, 16 ft. Head, Rubber-Rollers, Hydraulic Swing, Hydraulic Lift, *Parts Only*

14
2014 Rowse Double 9 Sickle Bar Mower
SN: VV-T9-115, Pull Type, 9 ft. Bars, IH Heads, 540 PTO, 9.5L-15L Tires

15
1990 Rowse Double 9 Sickle Bar Mower
  SN: W-T9-196, Pull Type, 9 ft. Bars, IH Heads, 540 PTO, 9.5L-15 Tires, PTO Shaft Available 

16
Sitrex Magnum MK14-16 V Rake
16 Wheel, Hydraulic Fold/Lift, ST205/75R15 Tires

17
New Holland 235 Side-Delivery Rake
SN: 518796

18
New Holland 688 Round Baler
SN: 4529,1000 PTO, Hydraulic Pickup, Autowrap, Twine Tie, 31X13.50-15 Tires, No Controller  

19
New Holland 660 Autowrap Round Baler
SN: 894015, Twine Tie, 540 PTO, Bale Density Control, 31X13.5-15 Tires  

20
Trailtech Roundbale Trailer
30 ft., 5 Bale, with Right-Hand Manual Dump, 11.00-15 Tires on 6-Bolt Hubs, *BILL OF SALE ONLY*

21
Gehl 8335 Total Mix Auger Feed Wagon
SN: 11743, 540 PTO, Left-Hand Delivery, Hydraulic Gate, Gehl 3200 Scale Front, Gehl EZ View RH Remote Display, 16.5L-16.1 Tires *BOTTOM AUGER SHAFT NEEDS REPAIRED*

22
Bradford Built Flatbed
8 ft., 5th Wheel Ball, Passenger Side Box

23
True North Steel Fuel Tank
1000 Gallons, Fuel Gauge, Fill-rite 20 GPM 115 Volt AC Pump with 800C Meter

24
True North Steel Fuel Tank
1000 Gallons, Fuel Gauge, Fill-rite 20 GPM 115 Volt AC Pump with 800C Meter

25
Fuel Tank
L-Shaped, 105 Gallons, GPI Hand Transfer Pump

26
MDS 5552B Skid Steer to Euro Adapter
SN:15347

27
Top Dog Attachments Skid Steer Snow Bucket
9 ft., Replaceable Blade, *Bottom of Skid Steer Plate Needs Repair*

28
Custom Skid Steer Rock Bucket
72 in., Replaceable Blade

29
Custom Skid Steer Manure Pusher
6 ft. 8 in., Backdrag

30
Bradco Skid Steer Forks
SN:1221, Single 48 in. Fork

31
Hotwoods Hydraulic Wire Winder
Skid Steer Fork Attach

32
MDS Hitch Mover
SN: 30023, Model 5701-R, 3 Point

33
Custom Hitch Mover with Single Bale Forks
3 Point, Needs Pin Repair

34
Grizzly Industrial Drill and Milling Machine
SN: 232673, Model G1005Z, 12 Speed, 115 Volt Single Phase

35
Rockwell Delta Bandsaw
SN:FP-4985, 28-300 Series, 115 Volt Single Phase

36
Greenlee Hydraulic Pounder
null

37
Sunflower Disc
20 ft. Rigid Disc, Wing Fold, 8 ft. Blade Spacing Front, 9 ft. Blade Spacing Rear, 17 in. Front Blades, 19in. Rear Blades, Scrapers, 9.5L-15 Tires on 5-Bolt Hubs, *AS-IS*

38
Morris CP525 Chisel Plow
SN: A11474-19, 20 ft., 3-Bar Morris Harrow, Spring Cushion, Wing Fold, 9.5L-15 Tires on 6-Bolt Hubs,*AS-IS*

39
Brillion Tandem Disc
14 ft., Hydraulic Lift, *AS-IS*

40
John Deere Plow
3 Bottom, Pull-type, *AS-IS*

41
Phoenix MFG CF8-125 Creep Feeder
SN: I 101

42
Phoenix MFG CF8-125 Creep Feeder
SN: I 102

43
Stur-D Double Bale Livestock Feeder
13 ft. x 8 ft.

44
Stur-D Double Bale Livestock Feeder
13 ft. x 8 ft.

45
Stur-D Single Bale Feeder
null

46
Bar-Six Cake Feeder
Pickup Mount

47
Rubber Tire Feeders
Quantity 2

48
Calving Pen, Head Catch, Walk-in Door
-

49
Powder River Portable Loading Chute
-

50
Priefert Calf Table
-

51
Cow Country Calf Table
-

52
Cow Country Calf Table Alleyway
-

53
Real-Tuff Splitting Alley
2 way, 1 piece

54
Cattle Squeeze Chute with Big Valley Palpation Cage
-

55
Real-Tuff Cattle Adjustable Alley
10.5 ft, Drop Panel

56
Real-Tuff Chute Head Chute
-

57
Real-Tuff Cattle Adjustable Alley
10.5 ft, Catwalk

58
Custom Free Standing Panel
25 ft., 5 Rung, Dual Chain, Quantity 3

59
Custom Free Standing Panel
25 ft., 5 Rung, Quantity 2

60
Custom Free Standing Livestock Panel
25 ft.

61
Custom Free Standing Livestock Panel
25 ft.

62
Custom 12ft. Steel Portable Livestock Panel
12 ft., Quantity 4

63
Hi-Qual Steel Portable Livestock Panel
12 ft., Quantity 2

64
Vern's MFG Portable Steel Portable Livestock Panel
12 ft., Quantity 2

65
Vern's MFG Steel Portable Livestock Panel
12 ft., 7 Rung, Quantity 2

66
Custom Steel Portable Livestock Panel
12 ft., Quantity 2

67
Custom Steel Square Tube Portable Livestock Panel
12 ft., 7 Rung

68
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

69
Custom Steel Portable Livestock Panel
12 ft.

70
Vern's MFG Portable Steel Portable Livestock Panel
12 ft.

71
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

72
Custom Steel Portable Livestock Panel
12 ft., 8 Rung

73
Custom Steel Square Tube Portable Livestock Panel
12 ft., 7 Rung

74
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

75
Vern's MFG Steel Portable Livestock Panel
12 ft.

76
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

77
Custom Steel Portable Livestock Panel
12 ft., 8 Rung

78
Vern's MFG Steel Portable Livestock Panel
10 ft., 7 Rung

79
Custom Steel Portable Square Tube Livestock Panel
8 ft.

80
Custom Steel Gate
14 ft.

81
Custom Steel Gate
14 ft., 6 Rung

82
Custom Steel Square Tube Gate
14 ft., 7 Rung

83
Custom Steel Square Tube Gate
14 ft.

84
Hi-Qual Steel Gate
12 ft., 6 Rung, Quantity 2

85
Sioux Steel Steel Gate
12 ft.

86
Hi-Qual Steel Gate
12 ft., 6 Rung

87
Hi-Qual Steel Gate
12 ft., 6 Rung

88
Custom Steel Square Tube Gate
12 ft., 7 Rung

89
Custom Steel Square Tube Gate
12 ft., 7 Rung

90
Custom Steel Gate
12 ft., 6 Rung

91
Custom Steel Gate
12 ft., 6 Rung

92
Custom Steel Gate
10 ft., 6 Rung

93
Galvanized Gate
8 ft.

94
Custom Steel Square Tube Livestock Gate
3 ft., 7 Rung

95
Power Poles
Various Lengths and Conditions, Approximately 26 +/-

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Sponsored Links

TIMED ONLINE ONLY - Lamb Retirement Auction - Whitehorse, SD

Pifer's Auction & Realty

Pifer's Auction & Realty


Contact:
Phone:
Sale Location
25686 BIA-2 Whitehorse
Whitehorse, SD 57661
Sale Dates and Times
Sale Terms and Conditions
AUCTION TERMS AND CONDITIONS
PLEASE REVIEW AND AGREE BEFORE PLACING ANY BIDS

All items are sold “as is”. Buyer(s) are encouraged to inspect all equipment before purchasing. All buyers must register with the clerk prior to bidding. Buyers are responsible for removing purchased items from the property within one week unless special arrangements have been made. Neither Pifer’s nor the sellers are responsible for the purchased items once they are sold. Buyer (s) agree to hold Pifer’s and sellers harmless and are not responsible for accidents. All items must be paid for in full prior to removal from property. All purchases are made in US dollars. All non-U.S. citizens must use a U.S. based bank to clear all funds for full payment. All statements made at the auction take precedence over all printed materials. All absentee bidders are encouraged to leave bids with auction personnel because of volatile cell phone coverage. Contact Pifer’s at 877-700-4099 to register prior to auction.
ALL BIDDERS: All items offered at a Pifer’s Auction are represented as these items are presented to Pifer’s Auctioneers and/or associate agents by the seller. Pifer’s Auctioneers has provided general equipment information to the buyers based upon a limited inspection completed by a Pifer’s Auction agent. Pifer’s has not inspected any aspects or components of the equipment other than those general details provided in the specific item description. Unless expressly stated, Pifer’s makes no representations or warranties, express or implied, concerning the functionality; overall general condition of body, engine, or transmission; year, make, &/or model; overall dimensions; or any defects found within any item offered at a Pifer’s Auction. Buyers are strongly advised to perform a detailed inspection and further due diligence of general information of the equipment prior to bidding.
Pifer’s Auctioneers and/or associate agents have not tested any particular item or piece of equipment under load nor has Pifer’s operated any equipment in all available gears. Pifer’s makes no representations or warranties that equipment is fully functional under manufacturers’ specifications.
Dimensions of equipment or other items sold at a Pifer’s Auction are provided as a general guide to buyers and should be considered estimated dimensions only. Point to point measurements vary depending upon different considerations of the starting point and ending point of the particular measurement (i.e. Wheel Base, Trailer Side Wall Height, Unit Length, etc). All measurement should be verified by the buyer and shall not be relied upon for transportation purposes. It is the buyer’s responsibility to measure all loads prior to leaving the auction site to ensure safe transport of the equipment to its destination.
All photos used to present each item are at the sole discretion of Pifer’s Auctioneers and may not be indicative of the item’s quality and condition, or reveal all components, variable angles, defects, and areas of limited visibility. Buyers are strongly advised to complete a full inspection of the equipment prior to bidding.
ABANDONED PROPERTY: All items must be removed within 10 business days of the final close of that auction. Unless mutually agreed upon with Pifer’s Auctioneers and/or the seller, a $25/day storage fee (not to exceed $1000) will be charged to each item and must be paid in full to Pifer’s Auctioneers (which will be remitted to the owner of the land where the items were stored) prior to buyer taking possession. If items are abandoned after 60 days, Pifer’s Auctioneers reserves the right to re-sell the items or dispose of the items at their sole discretion.
ONLINE/PHONE BIDDERS: A 5% buyer’s premium will apply to all online and over the phone purchases, not to exceed $1000 per successful lot. To ensure bidding accuracy and guarantee your bid is placed, we encourage you to attend the auction in person if you are able. Pifer’s is NOT responsible for connection or computer issues during the live bidding process. All phone bidders are encouraged to leave bids with auction personnel because of volatile cell phone coverage. Contact Pifer’s at 877-700-4099 to register prior to auction.
ONLINE & ABSENTEE BIDDERS:
All absentee bids on file with Pifer’s must comply with the following terms and conditions:
  1. All absentee bids must be submitted by registered bidder.
  2. All bids are executed in competition with the bidders in attendance on an alternate basis as if the bidder were present at the auction and the purchase will be obtained at the lowest bid possible.
  3. All bidders agree to be bound by Pifer’s bidder registration agreement.
  4. All statements made the day of the auction take precedence over all printed materials. All items are sold “As-IS, Where-IS”.
  5. Pifer’s does not guarantee the year, condition, description or suitability of any item.
  6. All bidders acknowledge that the absentee bid is accepted on the expressed condition that the bidder will not have any claim against the auctioneer or its employees if the auctioneer fails, for any reason, to bid on behalf of the bidder.
  7. Pifer’s does not guarantee that the bid will be made however will do everything possible on the date of the auction to represent the absentee bidder.
  8. Absentee bid(s) must be received 24 hours in advance of auction.
  9. All absentee bids will have a buyer’s premium of 5% of purchase price, with a maximum of $1000.00 per successful lot.
  10. Minimum acceptable bid on any one item or lot is $1000.
Online Bidders, Phone Bidders, and Absentee Bidders agree to hold Pifer’s harmless in the event that a bid is not placed to secure a winning bid, or if the bidder has technical issues with any portion of the bidding process, the online bidding website, or personal computer issues.


Sales Tax:
All appropriate state sales tax laws will apply to purchases, these laws may vary depending upon the type of item purchased or the specific tax category that the buyer is in.
CREDIT CARD PAYMENTS WILL INCUR A 4% FEE.
ONLINE AUCTIONS:
Timed Online Only Auctions will begin to close at the time specified for each individual auction. These are considered “Soft Staggered Closings” and the auction will close at a rate of 2 items every 2 minutes. Each lot may remain open until no bids are placed within the last 5 minutes. Each bid placed within the last 5 minutes will extend the bidding to 5 minutes. A bid must survive the final 5-minute timer to be declared successful.
Pifer’s Auctioneers reserves the right to alter or change the closing process at its discretion. Once the auction is over and a winning bidder is declared, the buyer assumes all responsibility for that item. Buyer further agrees to hold Pifer’s Auctioneers, and its client, harmless for all items that are lost, stolen, or damaged. Neither Pifer’s Auctioneers, nor the owner, will agree to any discount or refund for items once the auction is complete. Buyer also assumes all responsibility for transportation, transportation preparation, or any expenses required to prepare items for shipping. Special load-out requirements, dis-assembly, packaging and insurance is the responsibility of the buyer, unless otherwise expressly stated and represented by Pifer’s Auctioneers.
Buyer acknowledges that online bidding and the technology used to accommodate the bidding process may be unreliable. Online Bidders, Phone Bidders, and Absentee Bidders agree to hold Pifer’s harmless in the event that a bid is not placed to secure a winning bid, or if the bidder has technical issues with any portion of the bidding process, the online bidding website, or personal computer issues. Auctioneer and owner(s) reserve the right to accept or reject any bid(s).
Terms & Conditions:
Once bidder accepts the terms and conditions of this auction, said bidder has entered into a legal and binding contract. Bidder agrees to abide by the rules of this auction and will properly make payment and take possession of the items that were successfully purchased. All items are sold “AS-IS, WHERE-IS” with no exceptions.
This sale is managed by Pifer’s Auction & Realty, Kevin Pifer, ND #715. Clerking #534. All statements made the day of the auction take precedence over all printed materials.

Listing Details

1
2014 McCormick MTX-135 T3 Tractor
SN: 5W3CS08190, 16F/12R 4 Speed Powershift Transmission, MFWD, Joystick Loader Controls, 3-Function, Left-Hand Reverser, Differential Lock, Cab Air/Heat, Radio, Three Hydraulics, 540/1000 PTO, 3 Po...

2
1977 International Harvester 1086 Tractor
SN: 18759, Cab, 2WD, 3 Point, No Top Link, , 3 Hydraulics, 540/1000 PTO, 20.8-38 Rear Tires, 11.00-16 Front Tires, Hours Unknown, with DuAl 3100 Front End Loader, 84 in. Bucket, 4 Tine Grapple, IH ...

3
DuAl 3100 Front End Loader
84 in. Bucket, 4 Tine Grapple, IH 1086 Mounts

3
Champion 740 Motor Grader
SN: 740-22-33-10109, 671 Detroit 6 Cylinder Diesel, 14 ft. Moldboard, Hydraulic Angle/Tilt/Slide/Lift, Front Hydraulic Remote, Cab, 14.00-24 Tires, Showing 3,851 Hours *ONE REAR DIFFERENTIAL NEEDS ...

4
2011 Dodge Ram 2500 Pickup
VIN: 3D7TT2CT9BG565924, 5.7 Liter Hemi, Automatic Transmission, 4WD, Power Windows/Locks/Mirrors, Cloth Interior, LT245/75R17 Tires, 8 ft. Bradford Built Flatbed, 5th Wheel Hitch, Dual-Side Storage...

5
2017 Honda Pioneer 1000 UTV
4WD, Limited Edition, Automatic Transmission, Turf Mode, Hill Mode, Sport Mode, Paddle Shift, Front Push-Out Windshield, Half Doors, Front Electric Winch, Rear Receiver, Fox Shocks, 27X11.00R14NHS ...

6
CamoPlast Tatou 4S Tracks
Fits 2011 Honda Foreman 500

7
2001 DCT 8X28GBT Gooseneck Flatbed Trailer
VIN: 4GBG2829311000298, SN: 10298, 28 ft. x 102 in., 24 ft. Wood Deck, 4 ft. Beavertail, Spring Suspension, Tandem Axle, LT235/85R16 Tires, Duals, Steel Wheels, Electric Brakes, Oil-Bath Bearings, ...

8
2001 Featherlite 5320 Livestock Gooseneck Trailer
SN: 4FGL024201H045375, 24 ft. X 80 in., 7,000 lb. Torsion Axles, Tandem Axle, LT235/85R16 Tires, Steel Trailer, Steel Wheels, Rear Swing Gate with Slider, 2 Midgates 1 with Slider, Wood Floor, Curb...

9
1979 Merritt CattleDrive Livestock Cattle Pot
VIN: P79L2218, 45 ft. X 96 in., Tandem Axle, Spring Suspension, 3 Compartment, 11R24.5 Tires, Steel Rims, *Hole in Front Compartment Floor* *Missing Ramps, Gates, Rails*

10
1981 Timpte Flatbed Trailer
40 ft. X 96 in., Tandem Axle, Rear Gooseneck Hitch, Spring Suspension, Steel Wheels, 10.00-20 Tires *BILL OF SALE ONLY*

11
MacDon APT Hydraulic Swing Swather
SN: 213093, Pull-type, 1000 PTO, 31X16.50-15 Tires, A-30 D Head, Steel Rollers, SN: 212983 *HYDROSWING TONGUE DAMAGED*

12
New Holland 116 Haybine Mower-Conditioner
SN: 548077, Pull Type, 16 ft. Head, Rubber Rollers, Hydraulic Swing, Hydraulic Lift, 540 PTO Driven Hydraulic Pump, 31X13.50-15 Tires, *Parts Only*

13
New Holland 116 Haybine Mower-Conditioner
SN:559607, Pull Type, 16 ft. Head, Rubber-Rollers, Hydraulic Swing, Hydraulic Lift, *Parts Only*

14
2014 Rowse Double 9 Sickle Bar Mower
SN: VV-T9-115, Pull Type, 9 ft. Bars, IH Heads, 540 PTO, 9.5L-15L Tires

15
1990 Rowse Double 9 Sickle Bar Mower
  SN: W-T9-196, Pull Type, 9 ft. Bars, IH Heads, 540 PTO, 9.5L-15 Tires, PTO Shaft Available 

16
Sitrex Magnum MK14-16 V Rake
16 Wheel, Hydraulic Fold/Lift, ST205/75R15 Tires

17
New Holland 235 Side-Delivery Rake
SN: 518796

18
New Holland 688 Round Baler
SN: 4529,1000 PTO, Hydraulic Pickup, Autowrap, Twine Tie, 31X13.50-15 Tires, No Controller  

19
New Holland 660 Autowrap Round Baler
SN: 894015, Twine Tie, 540 PTO, Bale Density Control, 31X13.5-15 Tires  

20
Trailtech Roundbale Trailer
30 ft., 5 Bale, with Right-Hand Manual Dump, 11.00-15 Tires on 6-Bolt Hubs, *BILL OF SALE ONLY*

21
Gehl 8335 Total Mix Auger Feed Wagon
SN: 11743, 540 PTO, Left-Hand Delivery, Hydraulic Gate, Gehl 3200 Scale Front, Gehl EZ View RH Remote Display, 16.5L-16.1 Tires *BOTTOM AUGER SHAFT NEEDS REPAIRED*

22
Bradford Built Flatbed
8 ft., 5th Wheel Ball, Passenger Side Box

23
True North Steel Fuel Tank
1000 Gallons, Fuel Gauge, Fill-rite 20 GPM 115 Volt AC Pump with 800C Meter

24
True North Steel Fuel Tank
1000 Gallons, Fuel Gauge, Fill-rite 20 GPM 115 Volt AC Pump with 800C Meter

25
Fuel Tank
L-Shaped, 105 Gallons, GPI Hand Transfer Pump

26
MDS 5552B Skid Steer to Euro Adapter
SN:15347

27
Top Dog Attachments Skid Steer Snow Bucket
9 ft., Replaceable Blade, *Bottom of Skid Steer Plate Needs Repair*

28
Custom Skid Steer Rock Bucket
72 in., Replaceable Blade

29
Custom Skid Steer Manure Pusher
6 ft. 8 in., Backdrag

30
Bradco Skid Steer Forks
SN:1221, Single 48 in. Fork

31
Hotwoods Hydraulic Wire Winder
Skid Steer Fork Attach

32
MDS Hitch Mover
SN: 30023, Model 5701-R, 3 Point

33
Custom Hitch Mover with Single Bale Forks
3 Point, Needs Pin Repair

34
Grizzly Industrial Drill and Milling Machine
SN: 232673, Model G1005Z, 12 Speed, 115 Volt Single Phase

35
Rockwell Delta Bandsaw
SN:FP-4985, 28-300 Series, 115 Volt Single Phase

36
Greenlee Hydraulic Pounder
null

37
Sunflower Disc
20 ft. Rigid Disc, Wing Fold, 8 ft. Blade Spacing Front, 9 ft. Blade Spacing Rear, 17 in. Front Blades, 19in. Rear Blades, Scrapers, 9.5L-15 Tires on 5-Bolt Hubs, *AS-IS*

38
Morris CP525 Chisel Plow
SN: A11474-19, 20 ft., 3-Bar Morris Harrow, Spring Cushion, Wing Fold, 9.5L-15 Tires on 6-Bolt Hubs,*AS-IS*

39
Brillion Tandem Disc
14 ft., Hydraulic Lift, *AS-IS*

40
John Deere Plow
3 Bottom, Pull-type, *AS-IS*

41
Phoenix MFG CF8-125 Creep Feeder
SN: I 101

42
Phoenix MFG CF8-125 Creep Feeder
SN: I 102

43
Stur-D Double Bale Livestock Feeder
13 ft. x 8 ft.

44
Stur-D Double Bale Livestock Feeder
13 ft. x 8 ft.

45
Stur-D Single Bale Feeder
null

46
Bar-Six Cake Feeder
Pickup Mount

47
Rubber Tire Feeders
Quantity 2

48
Calving Pen, Head Catch, Walk-in Door
-

49
Powder River Portable Loading Chute
-

50
Priefert Calf Table
-

51
Cow Country Calf Table
-

52
Cow Country Calf Table Alleyway
-

53
Real-Tuff Splitting Alley
2 way, 1 piece

54
Cattle Squeeze Chute with Big Valley Palpation Cage
-

55
Real-Tuff Cattle Adjustable Alley
10.5 ft, Drop Panel

56
Real-Tuff Chute Head Chute
-

57
Real-Tuff Cattle Adjustable Alley
10.5 ft, Catwalk

58
Custom Free Standing Panel
25 ft., 5 Rung, Dual Chain, Quantity 3

59
Custom Free Standing Panel
25 ft., 5 Rung, Quantity 2

60
Custom Free Standing Livestock Panel
25 ft.

61
Custom Free Standing Livestock Panel
25 ft.

62
Custom 12ft. Steel Portable Livestock Panel
12 ft., Quantity 4

63
Hi-Qual Steel Portable Livestock Panel
12 ft., Quantity 2

64
Vern's MFG Portable Steel Portable Livestock Panel
12 ft., Quantity 2

65
Vern's MFG Steel Portable Livestock Panel
12 ft., 7 Rung, Quantity 2

66
Custom Steel Portable Livestock Panel
12 ft., Quantity 2

67
Custom Steel Square Tube Portable Livestock Panel
12 ft., 7 Rung

68
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

69
Custom Steel Portable Livestock Panel
12 ft.

70
Vern's MFG Portable Steel Portable Livestock Panel
12 ft.

71
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

72
Custom Steel Portable Livestock Panel
12 ft., 8 Rung

73
Custom Steel Square Tube Portable Livestock Panel
12 ft., 7 Rung

74
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

75
Vern's MFG Steel Portable Livestock Panel
12 ft.

76
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

77
Custom Steel Portable Livestock Panel
12 ft., 8 Rung

78
Vern's MFG Steel Portable Livestock Panel
10 ft., 7 Rung

79
Custom Steel Portable Square Tube Livestock Panel
8 ft.

80
Custom Steel Gate
14 ft.

81
Custom Steel Gate
14 ft., 6 Rung

82
Custom Steel Square Tube Gate
14 ft., 7 Rung

83
Custom Steel Square Tube Gate
14 ft.

84
Hi-Qual Steel Gate
12 ft., 6 Rung, Quantity 2

85
Sioux Steel Steel Gate
12 ft.

86
Hi-Qual Steel Gate
12 ft., 6 Rung

87
Hi-Qual Steel Gate
12 ft., 6 Rung

88
Custom Steel Square Tube Gate
12 ft., 7 Rung

89
Custom Steel Square Tube Gate
12 ft., 7 Rung

90
Custom Steel Gate
12 ft., 6 Rung

91
Custom Steel Gate
12 ft., 6 Rung

92
Custom Steel Gate
10 ft., 6 Rung

93
Galvanized Gate
8 ft.

94
Custom Steel Square Tube Livestock Gate
3 ft., 7 Rung

95
Power Poles
Various Lengths and Conditions, Approximately 26 +/-

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
TIMED ONLINE ONLY - Lamb Retirement Auction - Whitehorse, SD
 Online Only Auction
Auction Date(s)
Bidding Starts: Wednesday Jun 22 , 08:00 AM
Bidding Ends: Wednesday Jun 29 , 12:00 PM
Auction Location

Whitehorse, SD 57661
Company
Pifer's Auction & Realty

Website: www.pifers.com

Listing Terms and Conditions
AUCTION TERMS AND CONDITIONS
PLEASE REVIEW AND AGREE BEFORE PLACING ANY BIDS

All items are sold “as is”. Buyer(s) are encouraged to inspect all equipment before purchasing. All buyers must register with the clerk prior to bidding. Buyers are responsible for removing purchased items from the property within one week unless special arrangements have been made. Neither Pifer’s nor the sellers are responsible for the purchased items once they are sold. Buyer (s) agree to hold Pifer’s and sellers harmless and are not responsible for accidents. All items must be paid for in full prior to removal from property. All purchases are made in US dollars. All non-U.S. citizens must use a U.S. based bank to clear all funds for full payment. All statements made at the auction take precedence over all printed materials. All absentee bidders are encouraged to leave bids with auction personnel because of volatile cell phone coverage. Contact Pifer’s at 877-700-4099 to register prior to auction.
ALL BIDDERS: All items offered at a Pifer’s Auction are represented as these items are presented to Pifer’s Auctioneers and/or associate agents by the seller. Pifer’s Auctioneers has provided general equipment information to the buyers based upon a limited inspection completed by a Pifer’s Auction agent. Pifer’s has not inspected any aspects or components of the equipment other than those general details provided in the specific item description. Unless expressly stated, Pifer’s makes no representations or warranties, express or implied, concerning the functionality; overall general condition of body, engine, or transmission; year, make, &/or model; overall dimensions; or any defects found within any item offered at a Pifer’s Auction. Buyers are strongly advised to perform a detailed inspection and further due diligence of general information of the equipment prior to bidding.
Pifer’s Auctioneers and/or associate agents have not tested any particular item or piece of equipment under load nor has Pifer’s operated any equipment in all available gears. Pifer’s makes no representations or warranties that equipment is fully functional under manufacturers’ specifications.
Dimensions of equipment or other items sold at a Pifer’s Auction are provided as a general guide to buyers and should be considered estimated dimensions only. Point to point measurements vary depending upon different considerations of the starting point and ending point of the particular measurement (i.e. Wheel Base, Trailer Side Wall Height, Unit Length, etc). All measurement should be verified by the buyer and shall not be relied upon for transportation purposes. It is the buyer’s responsibility to measure all loads prior to leaving the auction site to ensure safe transport of the equipment to its destination.
All photos used to present each item are at the sole discretion of Pifer’s Auctioneers and may not be indicative of the item’s quality and condition, or reveal all components, variable angles, defects, and areas of limited visibility. Buyers are strongly advised to complete a full inspection of the equipment prior to bidding.
ABANDONED PROPERTY: All items must be removed within 10 business days of the final close of that auction. Unless mutually agreed upon with Pifer’s Auctioneers and/or the seller, a $25/day storage fee (not to exceed $1000) will be charged to each item and must be paid in full to Pifer’s Auctioneers (which will be remitted to the owner of the land where the items were stored) prior to buyer taking possession. If items are abandoned after 60 days, Pifer’s Auctioneers reserves the right to re-sell the items or dispose of the items at their sole discretion.
ONLINE/PHONE BIDDERS: A 5% buyer’s premium will apply to all online and over the phone purchases, not to exceed $1000 per successful lot. To ensure bidding accuracy and guarantee your bid is placed, we encourage you to attend the auction in person if you are able. Pifer’s is NOT responsible for connection or computer issues during the live bidding process. All phone bidders are encouraged to leave bids with auction personnel because of volatile cell phone coverage. Contact Pifer’s at 877-700-4099 to register prior to auction.
ONLINE & ABSENTEE BIDDERS:
All absentee bids on file with Pifer’s must comply with the following terms and conditions:
  1. All absentee bids must be submitted by registered bidder.
  2. All bids are executed in competition with the bidders in attendance on an alternate basis as if the bidder were present at the auction and the purchase will be obtained at the lowest bid possible.
  3. All bidders agree to be bound by Pifer’s bidder registration agreement.
  4. All statements made the day of the auction take precedence over all printed materials. All items are sold “As-IS, Where-IS”.
  5. Pifer’s does not guarantee the year, condition, description or suitability of any item.
  6. All bidders acknowledge that the absentee bid is accepted on the expressed condition that the bidder will not have any claim against the auctioneer or its employees if the auctioneer fails, for any reason, to bid on behalf of the bidder.
  7. Pifer’s does not guarantee that the bid will be made however will do everything possible on the date of the auction to represent the absentee bidder.
  8. Absentee bid(s) must be received 24 hours in advance of auction.
  9. All absentee bids will have a buyer’s premium of 5% of purchase price, with a maximum of $1000.00 per successful lot.
  10. Minimum acceptable bid on any one item or lot is $1000.
Online Bidders, Phone Bidders, and Absentee Bidders agree to hold Pifer’s harmless in the event that a bid is not placed to secure a winning bid, or if the bidder has technical issues with any portion of the bidding process, the online bidding website, or personal computer issues.


Sales Tax:
All appropriate state sales tax laws will apply to purchases, these laws may vary depending upon the type of item purchased or the specific tax category that the buyer is in.
CREDIT CARD PAYMENTS WILL INCUR A 4% FEE.
ONLINE AUCTIONS:
Timed Online Only Auctions will begin to close at the time specified for each individual auction. These are considered “Soft Staggered Closings” and the auction will close at a rate of 2 items every 2 minutes. Each lot may remain open until no bids are placed within the last 5 minutes. Each bid placed within the last 5 minutes will extend the bidding to 5 minutes. A bid must survive the final 5-minute timer to be declared successful.
Pifer’s Auctioneers reserves the right to alter or change the closing process at its discretion. Once the auction is over and a winning bidder is declared, the buyer assumes all responsibility for that item. Buyer further agrees to hold Pifer’s Auctioneers, and its client, harmless for all items that are lost, stolen, or damaged. Neither Pifer’s Auctioneers, nor the owner, will agree to any discount or refund for items once the auction is complete. Buyer also assumes all responsibility for transportation, transportation preparation, or any expenses required to prepare items for shipping. Special load-out requirements, dis-assembly, packaging and insurance is the responsibility of the buyer, unless otherwise expressly stated and represented by Pifer’s Auctioneers.
Buyer acknowledges that online bidding and the technology used to accommodate the bidding process may be unreliable. Online Bidders, Phone Bidders, and Absentee Bidders agree to hold Pifer’s harmless in the event that a bid is not placed to secure a winning bid, or if the bidder has technical issues with any portion of the bidding process, the online bidding website, or personal computer issues. Auctioneer and owner(s) reserve the right to accept or reject any bid(s).
Terms & Conditions:
Once bidder accepts the terms and conditions of this auction, said bidder has entered into a legal and binding contract. Bidder agrees to abide by the rules of this auction and will properly make payment and take possession of the items that were successfully purchased. All items are sold “AS-IS, WHERE-IS” with no exceptions.
This sale is managed by Pifer’s Auction & Realty, Kevin Pifer, ND #715. Clerking #534. All statements made the day of the auction take precedence over all printed materials.


1
2014 McCormick MTX-135 T3 Tractor
SN: 5W3CS08190, 16F/12R 4 Speed Powershift Transmission, MFWD, Joystick Loader Controls, 3-Function, Left-Hand Reverser, Differential Lock, Cab Air/Heat, Radio, Three Hydraulics, 540/1000 PTO, 3 Po...

2
1977 International Harvester 1086 Tractor
SN: 18759, Cab, 2WD, 3 Point, No Top Link, , 3 Hydraulics, 540/1000 PTO, 20.8-38 Rear Tires, 11.00-16 Front Tires, Hours Unknown, with DuAl 3100 Front End Loader, 84 in. Bucket, 4 Tine Grapple, IH ...

3
DuAl 3100 Front End Loader
84 in. Bucket, 4 Tine Grapple, IH 1086 Mounts

3
Champion 740 Motor Grader
SN: 740-22-33-10109, 671 Detroit 6 Cylinder Diesel, 14 ft. Moldboard, Hydraulic Angle/Tilt/Slide/Lift, Front Hydraulic Remote, Cab, 14.00-24 Tires, Showing 3,851 Hours *ONE REAR DIFFERENTIAL NEEDS ...

4
2011 Dodge Ram 2500 Pickup
VIN: 3D7TT2CT9BG565924, 5.7 Liter Hemi, Automatic Transmission, 4WD, Power Windows/Locks/Mirrors, Cloth Interior, LT245/75R17 Tires, 8 ft. Bradford Built Flatbed, 5th Wheel Hitch, Dual-Side Storage...

5
2017 Honda Pioneer 1000 UTV
4WD, Limited Edition, Automatic Transmission, Turf Mode, Hill Mode, Sport Mode, Paddle Shift, Front Push-Out Windshield, Half Doors, Front Electric Winch, Rear Receiver, Fox Shocks, 27X11.00R14NHS ...

6
CamoPlast Tatou 4S Tracks
Fits 2011 Honda Foreman 500

7
2001 DCT 8X28GBT Gooseneck Flatbed Trailer
VIN: 4GBG2829311000298, SN: 10298, 28 ft. x 102 in., 24 ft. Wood Deck, 4 ft. Beavertail, Spring Suspension, Tandem Axle, LT235/85R16 Tires, Duals, Steel Wheels, Electric Brakes, Oil-Bath Bearings, ...

8
2001 Featherlite 5320 Livestock Gooseneck Trailer
SN: 4FGL024201H045375, 24 ft. X 80 in., 7,000 lb. Torsion Axles, Tandem Axle, LT235/85R16 Tires, Steel Trailer, Steel Wheels, Rear Swing Gate with Slider, 2 Midgates 1 with Slider, Wood Floor, Curb...

9
1979 Merritt CattleDrive Livestock Cattle Pot
VIN: P79L2218, 45 ft. X 96 in., Tandem Axle, Spring Suspension, 3 Compartment, 11R24.5 Tires, Steel Rims, *Hole in Front Compartment Floor* *Missing Ramps, Gates, Rails*

10
1981 Timpte Flatbed Trailer
40 ft. X 96 in., Tandem Axle, Rear Gooseneck Hitch, Spring Suspension, Steel Wheels, 10.00-20 Tires *BILL OF SALE ONLY*

11
MacDon APT Hydraulic Swing Swather
SN: 213093, Pull-type, 1000 PTO, 31X16.50-15 Tires, A-30 D Head, Steel Rollers, SN: 212983 *HYDROSWING TONGUE DAMAGED*

12
New Holland 116 Haybine Mower-Conditioner
SN: 548077, Pull Type, 16 ft. Head, Rubber Rollers, Hydraulic Swing, Hydraulic Lift, 540 PTO Driven Hydraulic Pump, 31X13.50-15 Tires, *Parts Only*

13
New Holland 116 Haybine Mower-Conditioner
SN:559607, Pull Type, 16 ft. Head, Rubber-Rollers, Hydraulic Swing, Hydraulic Lift, *Parts Only*

14
2014 Rowse Double 9 Sickle Bar Mower
SN: VV-T9-115, Pull Type, 9 ft. Bars, IH Heads, 540 PTO, 9.5L-15L Tires

15
1990 Rowse Double 9 Sickle Bar Mower
  SN: W-T9-196, Pull Type, 9 ft. Bars, IH Heads, 540 PTO, 9.5L-15 Tires, PTO Shaft Available 

16
Sitrex Magnum MK14-16 V Rake
16 Wheel, Hydraulic Fold/Lift, ST205/75R15 Tires

17
New Holland 235 Side-Delivery Rake
SN: 518796

18
New Holland 688 Round Baler
SN: 4529,1000 PTO, Hydraulic Pickup, Autowrap, Twine Tie, 31X13.50-15 Tires, No Controller  

19
New Holland 660 Autowrap Round Baler
SN: 894015, Twine Tie, 540 PTO, Bale Density Control, 31X13.5-15 Tires  

20
Trailtech Roundbale Trailer
30 ft., 5 Bale, with Right-Hand Manual Dump, 11.00-15 Tires on 6-Bolt Hubs, *BILL OF SALE ONLY*

21
Gehl 8335 Total Mix Auger Feed Wagon
SN: 11743, 540 PTO, Left-Hand Delivery, Hydraulic Gate, Gehl 3200 Scale Front, Gehl EZ View RH Remote Display, 16.5L-16.1 Tires *BOTTOM AUGER SHAFT NEEDS REPAIRED*

22
Bradford Built Flatbed
8 ft., 5th Wheel Ball, Passenger Side Box

23
True North Steel Fuel Tank
1000 Gallons, Fuel Gauge, Fill-rite 20 GPM 115 Volt AC Pump with 800C Meter

24
True North Steel Fuel Tank
1000 Gallons, Fuel Gauge, Fill-rite 20 GPM 115 Volt AC Pump with 800C Meter

25
Fuel Tank
L-Shaped, 105 Gallons, GPI Hand Transfer Pump

26
MDS 5552B Skid Steer to Euro Adapter
SN:15347

27
Top Dog Attachments Skid Steer Snow Bucket
9 ft., Replaceable Blade, *Bottom of Skid Steer Plate Needs Repair*

28
Custom Skid Steer Rock Bucket
72 in., Replaceable Blade

29
Custom Skid Steer Manure Pusher
6 ft. 8 in., Backdrag

30
Bradco Skid Steer Forks
SN:1221, Single 48 in. Fork

31
Hotwoods Hydraulic Wire Winder
Skid Steer Fork Attach

32
MDS Hitch Mover
SN: 30023, Model 5701-R, 3 Point

33
Custom Hitch Mover with Single Bale Forks
3 Point, Needs Pin Repair

34
Grizzly Industrial Drill and Milling Machine
SN: 232673, Model G1005Z, 12 Speed, 115 Volt Single Phase

35
Rockwell Delta Bandsaw
SN:FP-4985, 28-300 Series, 115 Volt Single Phase

36
Greenlee Hydraulic Pounder
null

37
Sunflower Disc
20 ft. Rigid Disc, Wing Fold, 8 ft. Blade Spacing Front, 9 ft. Blade Spacing Rear, 17 in. Front Blades, 19in. Rear Blades, Scrapers, 9.5L-15 Tires on 5-Bolt Hubs, *AS-IS*

38
Morris CP525 Chisel Plow
SN: A11474-19, 20 ft., 3-Bar Morris Harrow, Spring Cushion, Wing Fold, 9.5L-15 Tires on 6-Bolt Hubs,*AS-IS*

39
Brillion Tandem Disc
14 ft., Hydraulic Lift, *AS-IS*

40
John Deere Plow
3 Bottom, Pull-type, *AS-IS*

41
Phoenix MFG CF8-125 Creep Feeder
SN: I 101

42
Phoenix MFG CF8-125 Creep Feeder
SN: I 102

43
Stur-D Double Bale Livestock Feeder
13 ft. x 8 ft.

44
Stur-D Double Bale Livestock Feeder
13 ft. x 8 ft.

45
Stur-D Single Bale Feeder
null

46
Bar-Six Cake Feeder
Pickup Mount

47
Rubber Tire Feeders
Quantity 2

48
Calving Pen, Head Catch, Walk-in Door
-

49
Powder River Portable Loading Chute
-

50
Priefert Calf Table
-

51
Cow Country Calf Table
-

52
Cow Country Calf Table Alleyway
-

53
Real-Tuff Splitting Alley
2 way, 1 piece

54
Cattle Squeeze Chute with Big Valley Palpation Cage
-

55
Real-Tuff Cattle Adjustable Alley
10.5 ft, Drop Panel

56
Real-Tuff Chute Head Chute
-

57
Real-Tuff Cattle Adjustable Alley
10.5 ft, Catwalk

58
Custom Free Standing Panel
25 ft., 5 Rung, Dual Chain, Quantity 3

59
Custom Free Standing Panel
25 ft., 5 Rung, Quantity 2

60
Custom Free Standing Livestock Panel
25 ft.

61
Custom Free Standing Livestock Panel
25 ft.

62
Custom 12ft. Steel Portable Livestock Panel
12 ft., Quantity 4

63
Hi-Qual Steel Portable Livestock Panel
12 ft., Quantity 2

64
Vern's MFG Portable Steel Portable Livestock Panel
12 ft., Quantity 2

65
Vern's MFG Steel Portable Livestock Panel
12 ft., 7 Rung, Quantity 2

66
Custom Steel Portable Livestock Panel
12 ft., Quantity 2

67
Custom Steel Square Tube Portable Livestock Panel
12 ft., 7 Rung

68
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

69
Custom Steel Portable Livestock Panel
12 ft.

70
Vern's MFG Portable Steel Portable Livestock Panel
12 ft.

71
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

72
Custom Steel Portable Livestock Panel
12 ft., 8 Rung

73
Custom Steel Square Tube Portable Livestock Panel
12 ft., 7 Rung

74
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

75
Vern's MFG Steel Portable Livestock Panel
12 ft.

76
Custom Steel Portable Livestock Panel
12 ft., 7 Rung

77
Custom Steel Portable Livestock Panel
12 ft., 8 Rung

78
Vern's MFG Steel Portable Livestock Panel
10 ft., 7 Rung

79
Custom Steel Portable Square Tube Livestock Panel
8 ft.

80
Custom Steel Gate
14 ft.

81
Custom Steel Gate
14 ft., 6 Rung

82
Custom Steel Square Tube Gate
14 ft., 7 Rung

83
Custom Steel Square Tube Gate
14 ft.

84
Hi-Qual Steel Gate
12 ft., 6 Rung, Quantity 2

85
Sioux Steel Steel Gate
12 ft.

86
Hi-Qual Steel Gate
12 ft., 6 Rung

87
Hi-Qual Steel Gate
12 ft., 6 Rung

88
Custom Steel Square Tube Gate
12 ft., 7 Rung

89
Custom Steel Square Tube Gate
12 ft., 7 Rung

90
Custom Steel Gate
12 ft., 6 Rung

91
Custom Steel Gate
12 ft., 6 Rung

92
Custom Steel Gate
10 ft., 6 Rung

93
Galvanized Gate
8 ft.

94
Custom Steel Square Tube Livestock Gate
3 ft., 7 Rung

95
Power Poles
Various Lengths and Conditions, Approximately 26 +/-