June 2022 Bright Star Virtual Consignment Auction
Previous Page Listing ID#: 1407337

Auction Location

Various Locations, IN 46540
Auction Dates and TimesSALE IS COMPLETED
Saturday Jun 18, 2022 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. All items must be removed within 14 days unless otherwise noted. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. Any rigging or loading fees are at buyers expense.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Information
Monthly virtual consignment auction. Online/phone bidding only. Consignments wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. This equipment is located at various locations, please note address and phone numbers in every description. Buyers have 14 days to remove equipment unless noted otherwise in description. 

00
Information Lot
June Virtual consignment auction. Please note locations and agent contact info  in each lot. Buyers have 14 days to remove equipment unless noted otherwise in description. Rigging is generally available on installed equipment. Rigging is an additional expense to buyer unless noted otherwise.

300
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box. Shipping available for $30

301
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Shipping available for $20

302
1/25 Scale Wood-Mizer LT-40 Super Hydraulic Sawmill
Still in original box. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Shipping is available at buyers expense. Call Jonathon 574.349.4380

399
Miner Edger
4''X32'' capacity, 2 blades, 1 movable (could both be movable) 3 spare blades (2 like new) belt tensioner is broke but otherwise in good condition. Located at: 8031 E Gallagher Lane Sumner IL Contact Eugene 260.350.8953

400
Twin Stenner Scragg Mill
It has 41 1/2'' band wheels, 5'' wide blade that is approximately 23' long, 30Kw 3-phase electric motors, weight strain, appears to be complete and is in unknown working condition. Item is located at 150 Seybert Ave White Pigeon Michigan 49099 Load out within 30 days. Call Bronson with questions 574-210-3721

401
Sanborn Mini Max Sawmill
It has a 4 head block carriage (1 head is not currently mounted), includes a 60 hp 460V 3-phase Westinghouse electric motor, 36'' band wheels the 1 1/8'' thickness, 5 1/2'' blade that is approximately 21' long, includes mud saw, includes hydraulic controls but no hydraulic unit. Item is located at 150 Seybert Ave White Pigeon Michigan 49099 Load out within 30 days. Call Bronson with questions 574-210-3721

402
Gear Box 34:1 Ratio
It has 54 tooth double sprockets and a coupling mount for a motor.  Item is located at 150 Seybert Ave White Pigeon Michigan 49099 Load out within 30 days. Call Bronson with questions 574-210-3721

402A
West Plains 3-Head Re-Saw
Model-WPRS-JRBS, SN- 732, Made in 1996, 6" chain conveyor feed with hydraulic drive, 5 hp hydraulic pack, 36" band wheels, 1 1/2" bands, 20 hp electric motors on heads, Very good condition, Production ready. Located at 11751 Co Rd 12, Middlebury, IN 46540. Call Eugene with any questions at 260-350-8953. 

403
Smith 2 Head Resaw w/ Return
1 1/4" band. Line shaft ready, ready for production. Located at 3455 Nickless Rd. Gladwin, MI 48624. Call Jonathon 574.349.4380

404
End-Around
Hydraulic drive. Located at 3455 Nickless Rd. Gladwin, MI 48624. Call Jonathon 574.349.4380

405
Detroit Series 60 Diesel Engine
330 HP, SN 06R0237772, new unit in 2016, meter reads 12,550 hrs. first lot of an entirety. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

406
Hydraulic Unit
2 pumps, jack shaft, made by Georgetown Hydraulics, mounted on 6' x 20' I Beam frame, Vickers hydraulic motor Eaton motor 104-1025-006 used on vibrating conveyor, Permico Hydraulic motor M257A731RRZA-15 used on blower. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

407
Quincy Air Compressor
Rebuilt in 8-27-19. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

408
Belt Driven Generator
15KW, Stamford. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

409
Entirety with 10% Raise 405-408
Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

409B
Timberking Talon 900 Portable Edger
Kohler command 25 engine, 2 blade, 1 moveable, 21'' x 56'' out feed belt, 21'' x 56'' infeed belt. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

410
CSI Buck Saw with Log Rack
MN DL-4400,SN4405071179, 7' x 16' saw rack, 5' saw blade, hydraulic drive. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380 

411
4 Strand Transfer
Hydraulic drive, 9' x 7'. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

412
Live Rollcase with 4 Arm Popup Transfer
with control box, 3' x 20', no drive, 6 1/2'' x 30'' rolls. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

413
Rollcase
12V over air controls, spiral rolls, no drive, 30'' x 17'6'', 6 1/2'' x 24'' rolls. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

414
Slab dump
110V over air controls, air lift cylinder, 36'' x 10'. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

415
Bumper Stops and Cable Pulleys
16'' cable pulley, frame 57'' outsider. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

416
Oil Cooler Fan
30'' x22'' radiator, hydraulic motor. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

417
Detroit Diesel Engine Series 50
Approx. 14000 total hours, newer radiator and control panel, Clutch and pulley, 6V belts C-244, 6V belts C-132. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

418
Deutz Diesel Engine
Type BF6L914C, fits on 419 platform, meter reads 8,888 hrs. First lot of an entirety.  Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

419
Hydraulic Pack with 3 Pumps on Platform
110 gallon pump, Hub City pump drive, pressure comp 40 gallon, 45 VQ pump runs 45M Vickers motor, filters and valves, 48'' x 48'' x 32'' tank, new inserts for pumps, jackshaft.Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

420
Lot # 418-419 with 10% Raise
Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

421
Oil Cooler
34'' x 32''x 10'' oil cooler, 3 HP electric.Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

422
Shafts with Pulley and Bearing
2 15/16'' x 80''shaft, 2 15/16'' x 48'' shaft, 8 groove pulley 13 1/2'', 4 groove pulley 13 1/2''. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

423
Hydraulic Pack
4 pumps, 2- 24 gallon Permco, 2- 20 gallon Vickers, mounted on frame with jackshaft, 51'' x 88'' frame, 48'' x 24'' x 30'' tank. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

424
Cleereman Carriage 3HB
model 36, SN36-214, panograph, oil tank for track oiler, 110V over air setworks, bottom dog turners, first lot of an entirety. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

424A
Air Cylinders for Cleereman Carriage
 Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

425
Carriage Drive Feed
Pump setup for line shaft, directional valve. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

426
Carriage Drive Hydraulic Cable Drum
5/8'' Cable. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

427
Silvatech Setworks NOT PART OF THE ENTIRETY
Was used on model 38. Complete works. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

429
Entirety with 10% Raise 424-428
Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

428
Parts for Cleereman Carriage
 Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

430
Reckart Edger (First Lot of Entirety)
MN 42E,SN 87012, 3 Stationary 2 moving blades, 20''blades, hydraulic cylinder on blade set, 3 feed rolls have been rebuilt, hydraulic drive, 6'' x 42'' capacity. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

675
Delta Radial Arm Saw
32"x48" table top, 64" tall, 18" blade, SN-89F31337, Needs new contactor. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

431
In Feed Rolls
4' x 10', side press roll with air cylinder, hydraulic controls. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

432
2 Belt Tailing System
19'' x 17' with 15 1/2'' belt, 6 1/2'' x 17' with 5'' belt, frame with press down rolls. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

433
Entirety - Lots 430-432 with 10% Raise
 Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

434
New Feed Roll for Edger
6'' x 44'' with 1 3/4'' shaft 60'' long. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

435
Edger Blades
12 pcs.22'', 8pcs.20''. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

436
Edger Spacers and Parts
Hydraulic motor, housing cracked. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

437
Clutch
Size 14T, needs repair. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

438
Hydraulic Pump and Motor
Pumps for 50 HP, carriage drive. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

439
Carriage Track
6 pc.14' plus 4 shorter ones. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

440
Frick Double End Trimsaw
20', SN 1064, 20'' saw blade, 2 moving saws. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

441
Cleereman Carriage 36''
Air setworks, needs rebuilt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

442
Hydraulic Pack
2 15/16'' x 80''shaft, mounted on skid, 37'' x 14'' x 23'' tank. Was used with the Deutz unit lot 418. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

443
Cyclone Stainless Steel
24'' x26'' x 61'' metal stand, 32'' x 6'. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

444
Belt Conveyor
12'' sides, hydraulic drive, 52'' x 18' x 48'' belt, cleated belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

445
Belt Conveyor
Hydraulic drive, 52'' x 15', 48'' belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

446
Belt Conveyor
Hydraulic drive, 42'' x 15', 30'' belt, cleated belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

447
Belt Conveyor
Hydraulic drive, 54'' x 34', 6 sides, 47'' belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

448
Rollcase with Board Kicker
No drive, hydraulic cylinder on kickers with 110 controls, 36'' x 24', 6 1/2'' x 30'' rolls. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

449
Pettibone Telehandler B-68
Parts machine. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

450
Hydraulic Cylinder 3 Stage
5 1/2'' x 55'', 3 stage cylinder for Pettibone. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

451
3 Clutches
Model 214. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

452
Cleereman Controls
Was used with lot # 441. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

453
Hydraulic Motor
Skid of motors and parts (assorted). Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

454
Oil Cooler Radiator
Shop built with hydraulic motor, radiator with small leak. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

454A
2 Head Wood-Mizer Horizontal Resaw
Hydraulic blade tension, hydraulic motors on end, press down rolls, hydraulic driven, 1 1/4'' bands, 7/8'' x 34'' band wheels, SN MH2D9406177, 6'' x 11' feed thru web belt. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454B
Morgan Single Head Resaw
1'' x 24'' wheel, 1 1/4'' band, hydraulic drive, 6'' x 14' feed belt, 8'' x 7' cant return belt, air tire press down rolls, gear box on belt feed needs new seals. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454C
Stutsman Cant Sizer
4'' x 6'' capacity, hydraulic drive feed rolls, 6'' x 6' 6'' side pressure belt, 6'' x 38'' infeed/outfeed belt, hydraulic driven. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454D
Morgan Board Deduster
hydraulic drive, 6'' x 5' infeed/outfeed belt hydraulic driven, press down roll needs new tire, SN 100603171. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454E
Transfer Belt
24'' x 10' hydraulic drive. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

455
Trash Hopper
36 1/2'' x 31'',self dumping, caster wheels. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

456
Trash Hopper
36 1/2'' x 31'',self dumping, caster wheels. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

457
Trash Hopper
36 1/2'' x 28, self dumping. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

458
Logisol 4-Sided Molder
Model # PH260 Hydraulic drive, electric feed, tongue and groove,knives,12''x 4'' outfeed, and "new" 5' infeed, top and bottom planers have no knives, hydraulic pumps for planer, jack shafts and mount, electric control box, motor starter. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

459
Hydraulic Tank
40'' x 16'' x 28''. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

459A
Fuel Tank
38'' x 60'',on stand, stand needs welded. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

459Z
Information Lot
Selling the excess equipment for Squier Pallet in Waterloo IN. Not to interfere with the successful ongoing operation of Squier Pallet. Be sure to check out these quality well maintained items most of them being one owner.
Loadout is available. Please have all uninstalled equipment & rolling stock removed within 2 weeks. 45 days for removal of installed equipment.
 Experienced Rigger Paul Avery 270.543.1919 is fully insured and committed to this job. Rigging is at the buyers expense. 

460
2006 Mellott Rosserhead Debarker
MN MR48, SN 0670C202, Pantograph arm, 54' x 6' x 88''high operator cab, airhead lift cylinder, 2-10,000 series hydraulic motors on wheels, all controls in cab, (Pilot controls) 75 HP electric on head, 3'' x 24'' bull wheels, 1 owner machine, 50 HP electric on hydraulic pack, hydraulic motor on chain feed, joystick controls, heat and AC, Item # 70C-2, support to ground, 14' 6'' outside to outside bull wheels, Date 5-06. VERY GOOD CONDITION! Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

461
Barn Sweep Barn Conveyor
18'' paddles, 46'' x 26' flat, 20' on incline, electric drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953. 

462
Mellot 5-Strand Log Deck
Support steel to ground, runs off debarker ( hydraulic), stop and load, hydraulic cylinder on stop and load, 10' x 28', Tulsa gear with hydraulic motor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

463
Cleereman Carriage 3HB
2006 Model #  420, SN 420-893-06, hydraulic setworks drive, air dogs, 16' long, controls in cab, set shaft proportional carriage, Paw Taw John setworks, 1 owner machine, 4 axles, pantograph and support post. This mill only ran an average of 2.5 days a week.A WELL MAINTAINED VERY NICE MILL!  1st lot of an entirety.  Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

464
Cleereman Track and Frame
Bumpers on ends, 58'' C-C x 50', support to ground. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

465
Tyrone Berry Feed and Drive
Feed was new in 2016, MN SMA220, SN 12780, control valve in cab, 60 HP electric, remote oil cooler, 5/8'' cable, 20'' Idler wheel. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

466
Cleereman 56'' Husk Frame with Top Saw
56'' saw, 4' x 8' frame, 32'' top saw, 24'' x 5' off bear belt. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

467
Lincoln Electric Motor
150 HP, frame 444T, 1,780 RPM, 480 V. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

468
Electric Hydraulic Pack
10 HP, 36'' x 14'' x 24'' tank, used on setworks, electric oil heater. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

469
Cleereman Operators Cab
Steps and Catwalk support to ground, heat and AC, 54'' x 96'' x80'' high. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

469A
Cleereman Entirety 463-469
With 10% raise. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

470
Cedar Creek 4 Blade Vertical Edger
No controls, splined shaft, 24'' saws, F7 style, 75 HP electric motor, 8'' x 40'' capacity. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

471
Mellott Log Turner
control valve in cab, hydraulic drive, 48'' chain drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

472
Mellot 5-Strand Log Deck
stop and load hydraulic cylinder, support to ground, Tulsa winch gear box with hydraulic drive, 10' x 22' (from debarker log stop), 52'' nose skids. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

473
Hydraulic Pump
Was run off mandrel, use for turner, 18'' x 20'' x 15'' tank. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

474
Transfer Belt
Built on Mellott rollcase frame, 31'' x 12' spiral rollcase built on end, support to ground, 36'' x 25' x 8'' sides, 22'' pan, 22'' belt. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

474A
Barn Sweep Bark Conveyor
Under debarker, electric drive, 44'' x 30' to incline, 30' incline, 60' total. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

475
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

476
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

477
56'' Saw Blade
BF style, has broken shoulder. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

478
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

479
56'' Saw Blade
BF style, marked spare only. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

480
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

481
Parts for Vertical Edger
New splined shaft, control valves, rubber coupling, Edger probes, brass pins, bearings, laser lights. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

482
Parts for Cleereman Carriage
Mac valves, turner teeth, brake pads, sprockets, arbor saw plates and collars. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

483
Cylinders for Edger Carriage
2 pc.- hydraulic 30'' stroke, 2pc. Hydraulic 24'' stroke, 1 pc. Air 18'' stroke. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

484
Skid of Parts & Jockey Grinders
2-jockey grinders (1 is new), blades for grinders for carbide teeth, saw wrenches, hydraulic motor, new Danfo's OMS 315. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

485
Bungee Rope for Debarker
1'', debarker carriage valve, belts, joystick handles for debarker controls, Carbide teeth for debarker. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

486
Debarker Parts
Head bearing, carriage wheels, cylinders for head, cylinders for stop and load. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

487
5/8'' Cable for Carriage Drive
2 pc-5/8'' x 100', 1 pc. 5/8'' x 65'. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

488
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

489
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

490
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

491
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

492
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

493
Mellott Log Turner
48'' chain type, hydraulic drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

494
Brett Single Head Knotcher
Hydraulic feed, SN 7811, MN NA100. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

495
Pendu Cant Sizer
Horizontal head. Carbide index bit spiral head, 12'' wide x 10'' high capacity, 30 HP electric motor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

496
Baker Twin Head Band Resaw
MN BBR-O, SN 96-1714, 13/16'' x 28'' wheels, 6'' x 17' feed thru belt, 6'' x 25' cant return belt, 20 HP electric on heads, electric drive on feed, 1 1/4'' band, air cylinder side press wheels, Pendu 16'' blower, 10 HP electric. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

497
Baker Side Transfer Belt
Hydraulic drive, 5 1/2'' x 40'' side shift belt, 24'' x 5', 21'' belt. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

498
Viking Turbo 505 Automatic Pallet Nailer and Stacker
New in 2006, This is the 505 long model, with a max capacity of 60''X72'' (72'' stringers) and min. of 28''X28'' Fully automated, pallet flipper, hopper feed for nails, set up for 3 runners but has parts for 4,  fully automatic stacker, 6' x 12' stack take out skate rolls, very good condition, 1 owner machine. Very nice unit! Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

500A
Marksman Matrix Laser Printer
Foxjet Pro-series 384, SN FXJT82501573,MN MKMATRIX, input 240, paints 2 sides of pallet. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

501
Spare Parts for Printer
Repaired printer head, Marksman duo fox jet, 2 bottles ink. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

502
Viking Gear Box for Turner
 Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

503
Leeson Electric Motor
10 HP, 3,520 RPM, frame 215T2, for Viking hydraulic pack. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

504
Electric Motor
For pallet turner on Viking nailer. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

505
Viking Stacker Gear Box
 Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

506
Viking Right Angle Electric Motor and Gear Box
0.5 HP, for conveyor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

507
Pallet of Viking Parts
Limit switches, control cable, air cylinder. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

9022
Pitts Log Trailer
44' long Tri-axle trailer with 11 Bunks spaced 6'6'" apart (see photos)
Tires and brakes are in good condition, current inspection valid.

508
Pallet of Viking Parts
Electric switches, seals, roller chain connecting links, control cable, photo eye sensors. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

9023
Flatbed Trailer
53' by 102" trailer

509
Pallet of Viking Parts
sprockets, electric switches, photo eye sensors, air cylinder. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

9024
Western Star Tractor
2000 Western Star 4964F Conventional with Sleeper, Cat 3406 425HP, 10 speed Eaton Transmission.

9031
Grapple Forks
60" Grapple Rake, New condition only used twice.

510
Pallet of Hose for Viking
Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

511
Pallet of Viking Parts
 Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

512
Pallet of Viking Parts
electric switches, air cylinders, photo eye sensors, hydraulic motors, control cable. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

513
Pallet of Viking Parts
Sprockets, chains, gear box, Parker valve, control cables. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

514
Pallet of Viking Parts
Electric switches, photo eye sensors, cylinders, gear box. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

515
Pallet of Viking Parts
Sprockets, gear boxes, cylinders, photo eye sensors, Parker valve, hydraulic motor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

516
NEW Portable Dust Blower
Has clear plexiglass cyclone, dust collection barrel, return air filter, 12" blower, 5 HP direct drive, 230 V, 6" inlet. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953  

517
Belt Conveyor
12" x 25' electric drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

519
AMW Horizontal Resaw
Wood-Mizer, meter reads 514 hrs., Kohler command, MN HR120G15,SN 12091031,15'' feed, 12'' belt, 74'' long,12V motor on feed belt, 18 3/4'' band wheel fits 1/2'' band, 28'' x 7 1/2'' press down bar, no battery, Ro. 15 motor. Located at 12973 Sawmill Rd. Allensville, PA 17002. Call Jonathon 574.349.4380

520
DISA 36" Dust Blower
Model-040-315-CCW-S, 15 hp electric motor, 16" inlet and 16" outlet. Located at 52240 CR 35 Bristol, IN 46540. Call Eugene with any questions at 260-350-8953.

521
Cyclone
32"x6' tall, Includes stand. Located at 52240 CR 35 Bristol, IN 46540. Call Eugene with any questions at 260-350-8953.

522
Woodpecker Downy Pallet Nailer
Model-Downy-60x70-071211-1L, Includes Hawkeye stacker, 110 firing system, Everything else is fully air powered, In good running condition, Everything works as it should, Machine was partially updated in 2018. ONLY NAILED 138,000 pallets in its entire lifetime!! Does not include nailers. Located at 52240 CR 35 Bristol, IN 46540. Call Eugene with any questions at 260-350-8953.

550
1938 Allis-Chalmers Model B Tractor
It has a 17 horse power 4-cylinder gas engine a 3-speed transmission with reverse. It comes with a PTO, rear belt pulley and is crank start only.  It is in good running condition.  Serial Number: B2912 Location: 4387 SR 331, Bremen, IN 46506. Call Bronson with questions 574-210-3721 

551
New Holland LS180B Skid Steer
Meter reads 1200 hours, enclosed cab but door is missing, Forks in photos are not included. sells with a bucket only, good working condition. Located at: 5916 Windsor RD Union Grove NC 28689 Contact Eugene 260.350.8953

579
2016 Case 588H Forklift
4 wheel drive, side shift, 3 stage, meter reads 433 hrs., heater, fan,  AC, Jensen radio, air ride seat, Case engine, 60 1/2'' wide, 48'' long forks, 9' 5'' mast, like new, one owner machine! PIN JJGN580HAFC728193, new in 2016. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

579A
Linde H30D Forklift
Meter reads 6450 hours, Volkswagen diesel engine, sideshift, tilts forward to 60 degrees, solid belting wheels but solid rubber wheels are included, runs and operates great but does not drive due to safety code T-326, get rid of the code and you will have a great machine. RESERVED TILL JULY 1st FOR LOADOUT.
Location: 5579 St Rt 414. Romulus, NY 14541.
Call Steve 570.460.0286

580
Toyota Forklift
Model-52-6FGCU30, SN-60834, 5,000 lb weight capacity, Meter reads 11,578 hours, engine was rebuilt approx. 2000 hrs. ago. solid tires, Has side shift, 5"x48" forks, 39"x87" tall three stage mast, works great. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478. RESERVED UNTIL JULY 1ST FOR LOADOUT

581
Toyota Forklift
FREE DELIVERY WITHIN 500 MILE RADIUS! Meter reads 24,140 hours as of 6-17-22,   Model-02-6FDU35, SN-60439, 7,000 lb capacity, Machine weight-13,686 lb, Has side shift, 3-stage mast, Pneumatic tires, Toyota diesel engine, Very good running machine, Everything works as it should. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

582
Pettibone Model B-68
MN B68-C,SN 7-509, quick attach system, runs and operates, good foam filled tires. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

583
Quick Attach Block Forks for Pettibone
4 prongs 48'' long. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

IM31550

584
Cat Forklift
5000 lb lift capacity, 3 stage, propane, meter reads  999 hrs. solid cushion tires, good working condition. Located at: W 14958 Babit Ave Gilman WI Contact Eugene 260.350.8953

585
Daewoo G35S Foklift
8000 lb lift capacity, meter reads 2896 hrs. enclosed cab, 3 stage, propane, Solid pneumatic tires, good working condition. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

586
JLG 2646 Scissor Lift
Electric, 26' lift w-extendable platform, good working condition. meter reads 986 hrs.. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

600
2004 Volvo L45B Wheel Loader
Hydraulic system was rebuilt. 4500 hours. Some seepage around engine. Quick attach. No attachments. The engine hood plastics has a few cracks (see pictures). Good working condition. Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

601
John Deere TC54H Wheel Loader
Meter reads 8,116 hrs., has third valve, AC and heat, quick attach, joystick controls, AM/FM radio, air ride seat, PIN DWTC541H589439, John Deere motor, good condition, no forks or buckets, CLEAN 1 owner machine, Engine SN 6068TDW50. DOES NOT INCLUDE ANY ATTACHMENTS. The forks sell as lot # 604. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

602
Case 621D Wheel Loader
Meter reads 5,150 hrs..,AC and heat, joystick controls, Case engine, 1 owner machine, 70'' wide, 46'' long forks, MN 621D, PIN JFF0137419, very good condition. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

603
Case 621B Wheel Loader
Meter reads 9,005 hrs., joystick controls, air ride seat, Case engine, 70'' wide, 38 1/2'' long forks, MN 621B, PIN JEE0051878,  good condition, heat, no AC Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

604
Quick Attach Grapple Forks
66 1/2'' wide, 37'' long forks, fits John Deere TC54H. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

605
Pin On Loader Bucket
31'' x 99 1/2'' wide, 47 1/2'' deep, fits 621D loader. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

606
Trojan 1500 Wheel Loader
Trojan 1500 Wheel Loader - Cummins 4 cyl. engine, starts and runs well, hydraulics are somewhat slow. Some hydraulic leaks, machine is in fair condition, the forks are 48"x 5" x 1 3/4".
Location: 682 Latimer Hill Road, Canajoharie, NY 13317 Contact: Steve 570.460.0286

607
Loader Bucket with Forks
The Bucket with Forks fit the Trojan Wheel Loader.. This an 8' combination style Bucket. The forks are 48" long with 45" usable due to gussets welded in the corners, they are 6" wide x 2" thick. 
Location: 682 Latimer Hill Road, Canajoharie, NY 13317
Contact: Steve 570.460.0286

608
Forks 60"
Forks are on a 1 15/16" shaft and measure 60" long x 7" wide x 2" thick. 
Location: 682 Latimer Hill Road, Canajoharie, NY 13317
Contact: Steve 570.460.0286

620
2012 Case 750L Crawler Dozer
PIN NBDC70004, meter reads 4450 hours, 6-way blade, 3-tooth ripper attachment, Fully enclosed cab with Heat/AC, Joystick controls, good sprockets, undercarriage in good condition. Very good running machine. Located at 1505 Heide Cooper Rd. Shanks, WV 26761. Call Jonathon 574.349.4380

621
1993 John Deere 550G Dozer
PIN T0550GH793920, meter reads 11,650 hours, only 200 hours on new undercarriage, John Deere engine, open cab, 33" x 105" 6- way blade, 18" wide tracks, 5 roller, long track, very good condition. Arrangement for Ohio delivery available. Reason for selling is seller upgraded to bigger machine. Located at 5683 Hoffman Norton Rd. Bristolville, OH 44402. Call Daniel at 440.693.4232.

629
2006 Chevrolet Silverado Pickup Truck, VIN # 2GCEK13T761220843
Year: 2006
Make: Chevrolet
Model: Silverado
Mileage: meter reads 250,735
Body Type: 4 Door Cab; Crew
Trim Level: LS; LT; Z71
Drive Line: 4WD
Engine Type: V8, 5.3L
Fuel Type: Gasoline
Transmission: automatic
VIN #: 2GCEK13T761220843

Features and Notes: Clean title, good running truck. Located at 1505 Heide Cooper Rd. Shanks, WV 26761. Call Jonathon 574.349.4380

630
2015 Peterbilt 388 Log Truck w/ 2019 Serco 8500 Self Loader
Year: 2015
Make: Peterbilt
Model: 388
Mileage: meter reads 549,720
Engine Type: Cummins L6, 14.9L; Turbo, no def
Fuel Type: Diesel
Horsepower: 625
Transmission: 18 speed Eaton Fuller
VIN #: 1NPWX4EXXFD258118

Features and Notes: 6 axles, 46,000 lb. rear axles, 20,000 lb. front axles, gross weight 85,000 lb. light weight 38,000 lb. 336" wheel base, steerable axle, full lock in rears, double frame, 26' bunk, all gauges work, new PTO, new pump, all new drums, brakes, and pads. Disc brakes in front, Jake brake, cruise, power windows, air suspension. Loader is 22' w/ 4' extension, continuous swivel Rotobec grapple, no leaks. Very good running truck. Clean title.
Located at: 1885 Kinsman Rd. NE North Bloomfield, Ohio 44450. Call Jonathon 574.349.4380

630A
2010 Kenworth W900 Truck, VIN # 1XKWD40X4AJ260307
Year: 2010
Make: Kenworth
Model: W900
Vehicle Type: Truck
Mileage: meter reads 292,000
Drive Line: 6x4
Engine Type: L6, 14.9L; Turbo
Fuel Type: Diesel
VIN #: 1XKWD40X4AJ260307

Features and Notes: Approx. 650 HP Cummins engine, I S x 18 speed, Virgin Michelin tires, It has a wet kit that will operate live floors. double frame, Chalmers suspension, 13,200 lb. front axle, 23,000 lb. (each) rear axles, New rebuilt transmission and clutch with 3 yr. warranty, meter reads 292,000 mi., no DEF, This truck is built to be an off road machine. THIS IS ONE NICE CLEAN MACHINE. A RARE FIND!! Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

630B
TOTALLED International Truck
Truck itself is totalled but has very good Cummins engine with Approximately 175-200,000 miles. 1 fuel tank, the headache rack, toolboxes, and a few tires are still in good condition as well. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

630C
Portable Dock Ramp
56"x32' long, 48" ramp height. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

630D
2,000 Dorsy Reefer Trailer
48 ft. spread axle, aluminum wheels, the whole inside floor is aluminum, side walls are not damaged, clean interior, everything is in good shape. No Reefer unit, road ready, with title and license. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

631
2006 John Deere 437C Knuckleboom
Serial # WC437CL013149, Good running machine. meter reads 16,061 hours, CSI 264 delimber, continuous Rotobec grapple. Heat, A/C, lights, and wipers all in working condition. Mounted on Pitts Kodiak series 3 hydraulic trailer with bucksaw hookups. Clean machine and ready for production. Located at 35359 State Route 143, Pomeroy, OH 45769. Call Jonathon 574.349.4380

631A
John Deere 435C Knuckle Boom Loader with Delimber
SN WC435 x 012259,model 435C,mounted on Big John trailer, brakes on trailer not working,1 rim will be fixed by sale time, engine SN PE6068T555876,heater and AC, nice clean machine, no blade, CTR Delimber with saw, current owner didn't use delimber, meter reads 13,017,hand fuel transfer pump, remote hydraulic hook up, Rotobec grapple, good tires, a well maintained machine, engine was rebuilt at 11,288 hrs. Located at 12973 Sawmill Rd. Allensville, PA 17002. Call Jonathon 574.349.4380

631B
CSI Bucksaw with Log Rack
5' saw blade, hydraulic drive, 6' x 20'. Located at 12973 Sawmill Rd. Allensville, PA 17002. Call Jonathon 574.349.4380

632
Prentice 310E Knuckleboom
Mounted on Pitts Trailer(SN-KB45T3SP950400), Less than 300 hours since complete engine rebuild, pumps replaced, and everything on undercarriage except bearing was replaced, SN-7206782, Made in 2000, Bucksaw hookups, Cab has Heat/AC and radio, Joystick controls, has Prentice continuous swivel bypass bucket, Meter read 9775 hours, Good running machine. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

632A
CTR De-Limber
Direct drive, 36" bar, Good condition. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

632B
Super Grip Grapple
Came off of a Timber Pro forwarder. Fully rebuilt and ready for use, Has not been used since rebuild. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

633
John Deere 335 Knuckle Boom Loader with Delimber
Runs and operates but engine needs rebuilt, hydraulic remote hook up, hydraulic works good, Barko 4250 grapple, meter reads 5,915 hrs. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

634
Timberking TK520 Knuckleboom
Meter reads 2,039 hrs., Cat engine M3065E,SN TK520PR59939, 50% thread on tires, good trailer, heat and AC, SN 35601172, MN TK520, Rotobec, grapple, SN 3070016RO-538378, MN 4642-B-BEL-F5-5, good running machine, new turn table bearing and seals, new injector pump. Located at 8814 Township Rd. 559 Millersburg, OH 43824. Call Eugene 260-350-8953.

635
Morbark Portable Chipper
1991 Chipper/waste recycler, w-cab, has self sustained knuckleboom, self contained hyd. unit, hasn't ran much in years, has some hyd. leaks, road ready although lights could be questionable. 1st lot of an entirety. Located at: 11606 Brickyard RD Holton MI 49425 Contact Eugene 260.350.8953

636
Cummins Power Unit
650 HP w-clutch, start right up and runs good. Meter reads 1451 hrs. located at: 11606 Brickyard RD  Holton MI Contact Eugene 260.350.8953

637
Entirety for Lots 635 & 636
Complete chip/recycler unit with power unit. Located at: 11606 Brickyard RD Holton MI Contact Eugene 260.350.8953

638
Vermeer HG200 Portable Horizontal Grinder
Includes pallet of extra parts(screens,teeth, etc.), Pintle hitch, Meter reads 57 hours but machine is believed to have 1700 original hrs. Powered by a 4 cylinder Cumins, Approx. 120 HP. Belt conveyor infeed, Fold-up conveyor outfeed, 16"x24" infeed capacity, VIN-1VR2171K561000139, Good running machine in good condition. NICE UNIT! Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

639
2012 Dyna Firewood Processor
Model-SC-14, SN-18201, 6'x6' fold up 3-strand infeed deck, Kohler CH940 gas engine(SN-4108800171), Pulls with 2" ball, Hydraulic pumps and cylinders on everything, 24" cut-off bar, 10'6" chain conveyor, 12' adjustable incline belt conveyor-12" belt, Hydraulic controls, Includes 4-way and 6-way splitting heads, Everything works as it should, Good working machine. Located at 12722 Co Rd 2 Edon,OH 43518. Call Jonathon with any questions at 574-349-4380.

640
New Portable Saw Mill
It is powered by a 14 hp 429cc Kohler gas engine with a centrifugal clutch and has a 2'000 lb winch to raise and lower the head. It has a 16' capacity and uses 1 1/4'' blades.  Brand new and never used.  Item is located at 150 Seybert Ave White Pigeon Michigan 49099. Load out within 30 days. Call Bronson with questions 574-210-3721 

640A
2022 NEW Timber Buddy MP362 Portable Sawmill
Manual production mill. See description in photos.
Location: 5579 St Rt 414 Romulus, NY 14541.
Contact: Steve 570.460.0286

640B
Lumber Tiger Band Mill
2001  690 Hrs. total run time on this mill!! Was completely refurbished & updated by Lumber Tiger in 2021,Fully hydraulic, Kubota  Diesel power unit,  bed is 40' long (36' log capacity) however 20' section can be removed, 36'' band wheels, 3.5'' drive shaft, 48'' opening between guides,  two hyd. turners, hyd. feed, up & down & squaring pins are hyd. one hyd. dog,  2 manual dogs, 2 hyd. tapers/rollers, 1 manual taper, no leaks, This is a HEAVY DUTY mill that was never used hard and is in very good condition! Located at 7095 ST RT 534 West Farmington OH 44491  Contact Eugene 260.350.8953

641
2016 Wood-Mizer LT70 Portable Bandmill
(sn: 456C72412FNKA4003)  mfg. date 10-13-15, hours 1979, includes laser debarker head.  Added Woodmizer Bracing on Shaft.  Yanmar Diesel Engine.  35-40 extra blades most new.  Loader Available for loading.  Owner recommends a flatbed for transport.  Located @ 87 I-B Maynard Street, Spencer, TN 38585  Contact Zach for more information.  Loading available 7 days a week with appointment.  

641A
2010 LT70 Super Wood -Mizer Band Mill
12,000 hrs, fully loaded, debarker, has the updated DCS control module with accuset II setworks, 55 HP Yanmar diesel, 36''X20' log capacity, has been well maintained but could use some work on the track. Located at: 3385 Armenian RD Sherman NY 14781 Contact Eugene 260.350.8953 

642
2014 TimberKing 2000 Band Mill
1 owner machine. SN: 1433. Fully hydraulic with computer setworks. 35 HP Kubota diesel. Only 1500 hrs. Always under roof. We removed the log loader attachment to use a separate log deck(not included). Log loader attachment will sell with machine. Has the Timberking board drag back system. Is currently set up to saw stationary but is a portable mill and axle with like new tires is included. Blade height from deck will go to 29”. Can saw up to 20’ log. Can handle very large logs due to deep cut throat. Is set up to use 1 1/2” bands but can be set up for 1 1/4”. Bi-directional chain log turner. In-line log debarker. All kinds of extra parts. A very nice high production portable band sawmill. Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

643
2014 Cooks AC-36 Thin Kerf Portable Sawmill
Meter reads 2177 hours with second engine, total hours on mill are unknown, has minimal wear and is overall in good working condition. 1 1/2'' x 26'' band wheels, 2''bands, Murphy controls on engine, skid of parts, Cat diesel engine, debarker, fully hydraulic, unitronics computer controls,12V. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

645
2020 Wood-Mizer LT40 Portable Sawmill
VIN 456062412LNKK7459, 36" x 21' log capacity, 35 HP Kohler gas engine, fully hydraulic, wide throat, debarker, only 58 hours, includes manuals, always stored inside, like new condition. overall dimensions 7' x 26' 4". Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

646
Wood-Mizer LT30 Portable Sawmill
VIN 456B420102NCJ4623, meter reads 1404 hours, debarker, log turner, Kohler 25 HP gas engine, includes manual and 20 extra blades. No axle. Always stored inside. Very good condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

650
1999 Woodmizer LT40 Portable Bandmill
VIN-456A32416XNEG9255, Meter reads 5508 hours, 1 1/2"x13'2" bands, 1"x18" band wheels, Kohler gas engine(SN-4717202071) has less than 500 hours, Approximately 25 hp, Manual controls, Has debarker attachment, Pulls with 2" ball hitch, 44"x8' log bed, 24' overall, Lights do not work, Includes 5 new blades and approximately 50 used blades, Various spare parts included, Everything works as it should, Good machine ready for production. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

651
Woodmizer LT40 Log Bed Extension
44"x24', Includes drive chain to hook up to LT40 mill, Good condition. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

652
Wood-Mizer LT30 Portable Sawmill
Serial # 01851412AL, Kohler 25 HP engine, works good. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

653
Wood-Mizer BMS250 Sharpener
BRAND NEW!! comes with a new 5'' Turbo grinding stone, & 5 gallons of sharpening oil.  Located at: 11606 Brickyard Rd Holton MI Contact Eugene 260.350.8953

660
Portable Band Mill
Set up for line shaft drive, Manual head and blade set, 1"x24" band wheels, 1 1/2" bands, 34' overall, 28"x18' log bed, 1/4" steel cable, Shop-built. Located at 1461 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380.

661
Cummins Power Unit
65 hp, SN-53125291, Model-4A2.3-P, Includes 12 gallon fuel tank, Meter reads 2860 hours, 2500 rpm, 12V battery. Located at 1461 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380.

662
Band Saw Blades
1 1/2"x14'10", 60 blades total, 30 used, 30 new in box. Located at 1461 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380.

663
Head Rig, Carriage, and Track
Shop Built, 1 1/2" x14'6" bands, Set up for PTO drive, Handset controls, 1"x24" bandwheels, 32"x15' carriage, 27" center to center of tracks, 40' long track(in (2) 20' sections, 1/4" cable. Located at 490 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380

664
Crown Electric Pallet Jack
Not currently working, Unsure of issue, 4"x42" forks, 3500 lb. capacity, SN-1A165566, Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

665
Tyler XL Bandsaw
SN-4039-98, 460V, Has power feed rolls, 2"x36'' bandwheels, 2" bands, 20 hp electric motor. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

666
Diehl Straight Line Rip Saw
Model-SL52, SN-73M-3260-2459, 80"x8' tabletop, 5' tall, 440 V, 220 plug in. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

667
Diehl 750 Straight Line Rip Saw
220 plug in, 55"x78" tabletop, 56" tall, In working condition. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

668
Weima Horizontal Grinder and Conveyor
Meter reads 12,947 hours, Made in 2014, Model-WLH300, Machine #-600-674, 460 V, Electric drive, 6"x11" infeed capacity, Includes electrical box with soft start, Includes 47' of vibrating conveyor infeed with electric drive, 10" pan, 4" sides, In very good condition. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

669
Doucet Return Table
Model-FB-24-3-9-G, SN-7004-10-220, Needs to be assembled, Electric drive. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

669A
Paul Optimizing Chop Saw
Model # MAXV4.OMV, serial # 99-908.06, has power infeed. Located at 2935 N 500 W. Shipshewana, IN 46565. Call Dan 330.749.9478

669B
Ladiag Silo Unloader
Model# 4345
Serial# SN1924345
Complete in operating condition
7.5 hp. Hydraulic power unit
New in 2020 hydraulic rotary union
No electrical controls.
Located at 2935 N 500 W. Shipshewana, IN 46565. Call Dan 330.749.9478
 

670
Delta Table Saw
43"x60" table top, 3' tall, 14" blade, Electric drive, Model-34790A, SN-2468. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

671
Outdoor Furnace
Wood-burning, Firebox is 2 years old, 26' of spray foam insulated hose, 5'x64"x6' tall. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

672
Woodcutting Band Saw
2"x36" band wheels, 1/2" bands, 55"x88' table top, 98" tall, 220 plug in, Condition unknown. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

673
Mattison Machine Works 276 Moulder
4'x8'x5' tall, Machine weight-9,000 lb, Electric drive,7"x4" capacity, 4 cutting heads, SN-19915. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

674
RENS P-3000 Portable Metal Detector
Comes with case and charger, Works as it should. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

676
Self Dumping Hopper
3'x4'x2' deep. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

677
3 Lumber Carts
All 3 carts are 3'x6', I solid steel, 2 have wooden surfaces. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

678
Skid Steer Snow Blade
Quick attach, 90" wide, Hydraulics for blade angle adjust, Replaceable cutting edge. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

679
Belt Conveyor
66"x17', 29" belt, Hydraulic drive, Heavy duty shop built, Adjustable legs on one end. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953. Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

680
3 Strand Log Deck
80"x12'x44" tall, No drive or chain, 45" nose skide. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

681
Milwaukee Band Saw Table
Set up for pipe clamp. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

682
Box of Milk Pails
Approximately 75 pails, 1.5 gallon, Includes side panels for more buckets. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

683
Vertical Air Tank
150 gallon, 22"x76" tall, Brand new, never used. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

684
Iron Bull Bottom Discharge Hopper
54"x64"x56" deep, In good condition. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

685
Iron Bull Bottom Discharge Hopper
54"x64"x56" deep, In good condition. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

686
Serco Knuckleboom Grapple
All new bushings and pins, New rotator, Good condition, Ready to use. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

687
Fork Extensions
50"x8'x6' tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

688
Slab Rack
45"x82"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

689
Slab Rack
45"x100"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

690
Slab Rack
45"x82"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

691
Slab Rack
45"x100"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

692
Decline Lumber Stacker
56"x80", 42"-33" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

693
Assorted Galvanized Dust Pipe
6" and 8" pipe, Assorted fittings. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953. Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

694
Natural "Puddingstone" Boulder
Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953. Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

695
North Tech Edge Sander
Model-NT-120ED-HD, SN-93120ED52, 7.5 hp, 440V, 3 ph, 9" x 138" belts, Includes 3 extra belts. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

696
Exhaust fan w/ pipe
Electric drive, 3 ph, 5 HP motor, Includes all controls & 8' of 24" galvanized steel pipe not attached. will be disassembled by the owner. Free loading. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

697
Exhaust fan w/ pipe
Electric drive, 3 ph, 5 HP motor, Includes all the controls & 8' of 24" galvanized steel pipe not attached. will be disassembled by the owner. Free loading. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

698
Yanmar Generator
17 KW, Phase convertor and electric box with starter, 3 phase, has auto start, was taken out of production 5 months ago. In good running condition. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

698C
Honeyville Complete Dust Collection System
Blower, cyclone, silo is 10' diameter, baghouse filter, includes 30" main trunk line dust pipe, 100 HP main blower, 10 HP transfer blower, 460V 3 phase. Good working condition. Buyer is responsible for removal. Metal Monkey is available for rigging. Must be removed by July 8th. Located at 6086 OH-241 Millersburg, OH 44654. Call Dan 330.749.9478

698D
Dixie Dust Collection System
Baghouse unit with air jet cleaner, 16" blower inlet, 25 HP blower, 460V 3 phase. Good working comdition. Buyer is responsible for removal. Metal Monkey is available for rigging. Must be removed by July 8th. Located at 6086 OH-241 Millersburg, OH 44654. Call Dan 330.749.9478

699
24" Dust Blower
8" inlet, 8" outlet, 20 hp electric motor, Includes extra pipe fittings, Mounted on stand w/ castors. Located at 3676 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

700
Curtis Air Compressor
80 gallon vertical tank, 7.5 hp electric motor, Model -E-57A, SN-EA7190633. Located at 3676 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

701
2-strand Transfer Deck
7'x11'6"x30" tall, No drive. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

702
Modine Cooling Unit for Natural Gas Genset
66"x90"x8' tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

703
Woodmizer 4000 Band Mill
Frame is still in Good condition, Everything else needs to be completely rebuilt/replaced, Includes panogram arm and post, SN-WM4000D12-11130444-A3.00, 80"x27'x104" tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

704
Log Trailer Bunk
10'4"x12'4"x68" tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

705
Cornell Barn Sweep Pan
No chain or drive, 45"x30'. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

706
30 HP Electric Motor
1765 rpm, 286T frame. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

707
7.5 HP Hydraulic Unit
36"x38"x52" tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

708
Lincoln Ideal-Arc R3S-325 Welder
SN-AC471275, Includes 3 full rolls of hard face wire, 480V, 3 ph. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

709
Woodchuck Bag House Dust Collector
220V, 3 ph, 38x72 bag size, In good working condition. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

710
3 Sided Hopper
8'x8'x4' deep. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

711
Air Lift Table
60"x80" surface. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

712
2 Tag Quick Attach Backhoe Buckets
(1) 16", (1) 12", QC30 coupler. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

713
2 Tag Quick Attach Backhoe Buckets
(2) 12" buckets. QC30 coupler. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

714
Belt Conveyor
32"x40', In 2 sections, No drive, 28" cleated belt. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

715
Catwalk Steps
Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

716
Dog Kennel
(4) 24"x30"x24" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

717
Dog Kennel
(4) 24"x30"x24" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

718
Dog Kennel
(4) 24"x30"x24" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

719
Dog Kennel
(6) 24"x30"x16" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

720
Hay Wagon
Fiberglass, 8'x20', 5' tall rack in back, Pin hitch. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

721
CAT C4 Power Unit
SN-NR360007, 111 hp, Good condition, Includes 12"x55"x36" hydraulic tank and 16"x55"x24" fuel tank, No hydraulic pump or clutch. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

722
Kubota D1105 Power Unit
12.5 KW @ 1800 RPM. 18 HP @ 1800 RPM. 22 HP @ 3000 RPM. Very low hours. Control panel. Runs very nice. Bellhousing H5 flywheel for 6" clutch. Needs new run solenoid. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

723
John Deere 4045T Power Unit
110 HP. Rebuilt by the Military in 2012. Ran 640 hours on air compressor. Good used Rockford clutch. Murphy controls. Very good condition. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

724
John Deere 6404TA Power Unit
Turbo & After cooled. 155 HP. 3015 Hours. WPT pilotless clutch. Murphy controls. Runs very nice. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

724A
Kubota D850 Power Unit
24 HP. Very low hours. Control panel. New WPT clutch. Runs very nice. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

724B
Kubota D600 Power Unit
20 HP. Very low hours. Control Panel. Stubshaft 1 1/4" diameter. Runs very nice. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

726
Enco Lathe and Drill
Comes with lots of tooling and operating manual. Belt drive. Good condition. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

727
Wood-Mizer Band Blades
15 Brand new plus 40+ used 1 1/2", .055, 747 silvertip blades. 14' 6". Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

728
Cooks Cat Claw Band Sharpener and Suffolk Tooth Setter
Electric drive. Good condition. Comes with a Suffolk dual tooth setter. Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

729
Information Lot for Lots 730-746
These lots were taken out of production 12 years ago. It was stored inside until 1 year ago. Lots 730-737 are offered individually then as an entirety at lot 738. All located at 93 Main St, Palatine NY 13428. They are all uninstalled and ready to load. Loadout hours are 7 AM - 4 PM. Contact Gaylord @ 574.536.1646.

730
Industies PHL Band Head Rig
Model: B-63. SN: S-106. RH. Air strain. Both band wheels are good. Was not in production for 12 years. Location: 93 Main ST E Palatine Bridge NY 13428. Contact Gaylord @ 574.536.1646.

731
HMC 4 HB Carriage and Track
Carriage is a #50 and RH. 4 HB. Silva Tech setworks. 30" x 26' capacity. 60' of track included. The carriage was completely rebuilt 1 year before shutdown. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

732
HMC Cab
In very good condition inside and out. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

733
HMC Vertical 3 Blade Edger
2 stationary and 1 moveable. All blades move up and down with hydraulic. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

734
Carriage Drive
With hydraulic unit, cooler, drum, and cable. Complete and in good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

735
150 HP Electric Motor
This came off of the headrig. Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

736
Band Blades
15 bands. 10" wide x 32'8". Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

737
Electric Soft Start
Fair condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

738
Entirety of Lots 730-737
With 10% raise. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

739
2 Strand Transfer Deck
4' wide x 10' long. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

740
Metal Detector
This one had a minor fire damage. It still works. No control box. 16" x 16' belt. Electric motor. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

741
Buffalo 70" Blower
30" diameter intake. 25" diameter outlet. With a 30" to 25" reduction pipe. Lots of 25" piping included. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

742
Chain Conveyor Wheels
3 wheels 9" x 24" diameter. Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

743
38 HP Iveco Diesel
It has a new radiator but engine needs to be rebuilt. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

744
Detroit Engine For Parts
Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

745
Valve Bank
V Pulley Sprocket pulley included. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

746
Hydraulic Unit
In fair condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

747
New 84" Driveway Grader
Skid steer quick attach, 2- hardened and replaceable cutting edges, replaceable runners, easy adjustment at both ends of each blade, heavy duty, powercoat finish. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Loadout and shipping available. Shipping is at buyers expense. Call Jonathon 574.349.4380

748
Portable Sheep Working Chute
Unit tilts for easy foot care etc. wide range of adjustment for small and large animals, good condition, 22" wide, 55" tall, 67" long. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Loadout and shipping available. Shipping is at buyers expense. Call Jonathon 574.349.4380

749
4 1/2'' Metal Bandsaw
16" x 35" x 45", has new blade, portable, good working condition. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Loadout and shipping available. Shipping is at buyers expense. Call Jonathon 574.349.4380

750
Helle Green Chain
10' x 17'. 3 strand. W-C55D roof top chain. Hydraulic drive. Good condition. Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions. 574-210-3721

751
Generac 20KW Genset
It has only 109 hours and was used as a stand by unit.  It has a 4-cylinder 3.0 liter natural gas powered engine, auto start, on board battery charger, 120/240 volt and is in good working condition. Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions.  574-210-3721

752
Winco Automatic Transfer Switch
Automatically turns on generator when low power is noticed and connects back to main power source when power is restored.   Solar power capable.  Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions  574-210-3721

753
Radiator for Power Unit
It is approximately 42'' wide x 61'' high.  It was last used on a Waukesha power unit model F1197GU before it was removed. Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions 574-210-3721

754
Non-Powered Rollcase
8' long., 16" x 3 1/2" rolls on 1" shafts. 20 1/4" roll spacing, the height adjusts from 32 1/2" to 41".
Barely used has new paint.
Contact Steve Bauder 570-460-0286
Location: 61 Kempsville Road, Kutztown, PA 19530

755
Non-Powered Rollcase
19' long, 16" x 3 1/2" diameter rolls on 1" shaft. Spaced 24", 35" high. Barely used, has new paint.
Contact: Steve Bauder 570-460-0286
Location: 61 Kempsville Road, Kutztown, PA 19530

756
Steel I-beams
Four (4) I-beams: 24" tall 7" wide 25' 3" long .395 web 1/2" flange weight is 1,400# each. Nice straight beams.
Location: 20814 Lehmans Mill Rd., Hagerstown, MD 21742
Contact: Steve Bauder 570-460-0286

757
Fuel Tank 1,000 Gallon (Leak)
1,000 gallon fuel tank that is damaged and has leak.
Location: 20814 Lehmans Mill Rd., Hagerstown, MD 21742
Contact: Steve Bauder 570-460-0286

758
Fuel Tank 1,000 Gallon
1,000 gallon fuel tank with electric fuel pump.
Location: 20814 Lehmans Mill Rd., Hagerstown, MD 21742
Contact: Steve Bauder 570-460-0286

759
Electric Motors on skid
One (1) skid of 7 total electric motors:
One (1) 5 HP; One (1) 2 HP; Two (2) 1/2 HP; One (1) 1/4 HP gear motor with 58.1 ratio; Two (2) unknown
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

760
Wisconsin Engine
4 cylinder Wisconsin engine.
Good running condition.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286
 

761
Mercedes Benz Diesel Engine
4 cylinder Mercedes Benz Diesel Engine.  Currently not running.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

762
Jointer
8" Jointer.  No drive.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

763
Truck Tool Box
Delta truck tool box.  20" wide, 60 1/2" long, 11" deep
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

764
Conveyor
Conveyor 12" x 18' with gearbox.  No drive.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

765
Tailing Belt
Tailing Belt. 18' long off Frick edger.  Has 4 1/2" and 13" belts. 42 1/2"inside mounting bracket.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

766
Electric Motor
20 HP 3 Phase Electric Motor
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

767
Oil Gear Hydraulic Motors
Two (2) Oil Gear Hydraulic Motors: PVWH20RSAY CN-NN
2.83 CID; 2500 PSI; 3000 Max; 2400 Max RPM.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286
 

768
Metaris Hydraulic Motor
Metaris Hydraulic Motor.  Brand new.
3.94 CID
#MHM31A842JEAL20-30
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

769
Loader Bucket
Loader Bucket 8', unknown make and model. Has been welded and modified.
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286
 

770
Steel I-Beams
(4) Galvanized I-Beams
12" web, 4" wide, 1/4" thick, Lengths are: 15' 3", 15' 8", 16" 9", 17' 7".Base plate: 16 1/2" x 7"
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

 

771
Log Deck
Forest-All Log Deck, 2 Strand, 15' x 5 1/2' 3HP with Drive
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

 

772
HMC Shavings Mill
HMC Shavings Mill - 2009, 20 HP Hydraulic Drive, Double Head with 00HP motors.
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

773
Dust Blower
Sawdust Blower, unknown make and model, not tested.
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

774
I-R Air Compressor
Air Compressor.  5 HP 3 Phase.  Motor Model # M3218T
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

775
Miller Welder SRH - 303
Primary 230/460, 60/30 Amps, 14.4 KV, 24 KVA, 3 Phase.

Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286
 

776
Steam Cleaner
Hotsy Model-S5735-3, 3000 PSI, 225 degrees, 460 VAC, 3 Phase
3,361 hours.  Natural gas powered for heat, can be converted to propane.
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

777
Drill Press
Powermatic Model 1150.
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

778
Vacuum Pump
SOGEVAC Model SV-40, 2HP, 208V
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

779
Plasma Cutter
Thermal Dynamics PAK Master 150XL
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

780
Metal Band Saw
J. A. Fay & Egan Band Saw
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

781
Trailer Chassi
Only yard ready. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

782
Spiral Rollcase
24" x 12' long. New paint. No drive. Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

783
Powermatic Shaper
Model # 26, serial # 8126556, 3/4" spindle, single phase, 2 HP, 115V/230V, excellent condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

784
Wood-Mizer Sharpener
Very good condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

785
Larick Profile Sander
Model 360AIR, serial # 22022, 7 different sanding heads, no motor, very good condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

788

786
New Wright Self Dumping Hopper
1 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

789

787
New Wright Self Dumping Hopper
2 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

790
Dewalt Chop Saw
Electric. In working condition. 8' infeed and 8' outfeed rolls. Located: E10168 Yttri Rd, Readstown WI 54652. Call Gaylord at 574.5363.1646 for any questions. Removal 14 days.

799
Information lot for items 800-820.
Located at 9805 Hwy 24E. Centreville, MS 39631.  Rigger Option Available: Mike Sartin  225-931-4899.  If using another rigger or rigging yourself, must provide Certificate of Insurance for $1 million in liability insurance.  Submit copy to ak@brightstarauctions.com.  

800
4 Strand Log Deck*
Hurdle 21'x17'wide, 4th strand added on H-78 chain, Tulsa Winch Drive Hydraulic, 4 arm stop and loader. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

801
Hurdle Magnum LT Sawmill*
to include 3 head block carriage, 17' carriage, carriage extended 2 ft, 13' dog centers, 40" openings, (3) 2 1/2 1045 axles, 12" wheel,48" track center, variable tapering, complete wiring package, features of the Magnum LT Carriage include 5x5x1/2 tubing frame vs. 4x6x3/8, 1/2x 8 angle bases vs. 1/2x6, 3/4x4" base wear plates vs. 3/4x3. Simple Tong Dog design, infinite variable tapering vs. 2 position dogs open 29" vs. 22 (no need for hammer dog) 40" openings vs. 36" , #100 headblock chain vs. #80 chain. 1 1/2" chain idler pin vs. 1 1/4" pin, Mac Air valves, cant turners, Nano setworks, 57.5 ft. track Cable Drum w/45T Cab Husk, no saw mandral, setworks in cab, hyd. Feedworks, off bearer belt. No main motor drive. Set carriage was replaced new in 2017. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699, Removal 30 days.

802
Live Rollcase*
22' with (9) 10'x30" rolls. Support to floor only. 5 hp gear motor drive. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699, Removal 30 days.

803
Rollcase*
35' (17) 6"x32" rolls includes 12' lift section for slab all out, support to floor. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699. Removal 30 days.

804
3 Strand Lumber Deck*
20'x8'4" wide, air bag pop up, S drive constructions, 81X chain, heavy duty, gear motor drive, support to the floor. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

805
Miner 3 Saw Edger*
2 movable 30"x 4", 14" blower, 25 hp motor, no motor controls, hydraulic set works. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

806
Transfer deck to edger*
8'x16' wide. H78 chain, gear motor drive, no support steel. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

807
5 Strand Transfer Deck*
8'x17'6" wide in floor transfer deck 5 strands, (4) H-78 roof top chain, (1) H-78 gear reductions drive, no support steel. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

808
Double End Trimmer*
20', 2 saw will cut up to 9" cant, Individually driven saws, 22' block removal conveyor. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

809
Belt Waste Conveyor*
13'x22" with gear reduction drive, no support steel. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

809A
Green Chain*
40'x8'x6" with S drive constructions, 81X chain, no drive.  Located at 9805 Hwy 24E, Centreville, MS 39631.  Rigger: Mike Sartin 225-931-4899 Contact Zach for information  931-224-0699  Removal 30 days

810
Barnsweep type conveyor*
55' with 42" pan and drive, no support steel is located under mill. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699. Removal 30 days.

811
Belt Conveyor*
15'x8" with gear reduction drive, under mill. No drive. Located at 9805 Hwy 24E, Centreville, MS 39631.Rigger: Mike Sartin 225-931-4899 Contact Zach for more information. 931-224-0699. Removal 30 days.

812
Tank Mount Air compressor*
Curtis 10 hp, no motor controls. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

813
Green Chain Deck*
30'x10' wide 4 strand with 81X chain, no drive. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

814
Shaker Screen*
Precision 6x6' (sn: S1899) (out) Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

815
Cyclone*
5' Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

817
Cant Cut-Off Saw*
Hydraulic operator, 15 hp motor and hydraulic 20 hp motor on saw, 32" carbide tip saw, 42" hydraulic cylinder. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699 Removal 30 days.

816
Chip Blower
Phelps F38KW with 25 hp with dust load out chute and pipe. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699 Rigger: Mike Sartin 225-931-4899 Removal 30 days.

818
Concave Belt Conveyor frame and roller*
165'x20", no belt, no drive, 110' on yard, 55' still installed. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699 Rigger: Mike Sartin 225-931-4899 Removal 30 days.

819
Rollcases*
15' with (5) 30"x6" rolls, 23' rollcase with (9) 24"x6" rolls, 17' rollcase with (7) 24"x6" rolls, 14' rollcase with (4) 19"x6" rolls, 22' rollcase with 40"x10" rolls, all are out on yard, NO DRIVES. 5 rollcases total. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699. Rigger: Mike Sartin 225-931-4899 Removal 30 days.

820
Belt Conveyor*
22'x 10" conveyor with gear reduction drive, 16'x14" belt conveyor, no drive, Both are out on yard. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699 Removal 30 days.

850
International DT 466 diesel engine

821
Morbark 640 Debarker*
75 hp motor with cab and controls. Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

822
Soft Start starter and disconnect
for the Debarker Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

823
(2) Log Decks
Morbark 22' 2 strand log deck, hydraulic drive, 9' support steel, 8' wide.Located at 1052 Reason Rd. Williamson, NC. . 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

824
Log Trough
Morbark 40' Endwise log trough, 19" track type chain, hydraulic drive.Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

825
Log Trough
Morbark 40' Endwise log trough, 19" track type chain, hydraulic drive, (2) 3 arm kickers. Both kick in same direction.Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

826
Bark conveyor
Morbark 30' drag chain type, 12" wide, hydraulic drive. Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

827
Waste Conveyor
Morbark 36" wide, 14' long, mounts under Debarker hydraulic drive.Located at 1052 Reason Rd. Williamson, NC.  30 days removal. Contact Zach Kittrell for more information. 931-224-0699

828
Tie Back of Lots 821-827
With 10% raise. Located at 1052 Reason Rd. Williamson, NC.  30 days removal. Contact Zach Kittrell for more information. 931-224-0699

829
Cambio Ring Debarker
30", 75 hp motor, individual hydraulic motors on heads, Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699. 1st lot of an entirety

830
Infeed trough
13' floating infeed trough for Debarker, hydraulic drive. Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

831
Cab
7'x7' Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

832
Cambio Debarker Frame
85' steel frame under Cambio Debarker. (3) 21" I Beams.  with axles and tires.   Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699.

833
lots 829-832 tied together with 10% raise
lots 829 thru 832 tied together with 10% raise*

841
Fastline Band Resaw
mounted on trailer deck 102" wide made to handle 12' material. Has return belts, 21' over all length. Resaw located at 155 Smith Mill Road, Smithville, AR 72466 Contact Zach Kittrell for more information.  931-224-0699 30 days removal. 

842
Up Cut saw
with 6'x12" gravity roll case. No motor, Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

843
Belt conveyor
33'x12" with Gear motor drive.Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

844
slant slide
20' steel. Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

845
Grapple Bucket
66" Universal quick attach for skid steer. Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

846
(4) Rolls
1 partial roll 1" x .05 AAR Black plastic banding, 1800SW. Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

847
Waukesha Natural Gas Power Unit
w-clutch, runs as it should, slight leak in manifold gasket. Was running untill last year. Still a nice unit.
Located at: 11606 Brickyard RD Holton MI Contact Eugene 260.350.8953

848
Waukesha Natural Gas Genset
meter reads 249 hrs. 150 KW (continuous) Kohler generator. Just fired up this week and runs very good. Generator tested AOK! Nice unit! Located at: 11606 Brickyard RD Holton MI Contact Eugene 260.350.8953

849
John Deere Power Unit
Model # 6359 TL, w-clutch, meter reads 2153 hrs. 6 cylinder, starts and runs good. Located at: 5179 Larson W RD West Farmington OH Contact Eugene 260.350.8953

850
471 Detroit Diesel with Clutch
The engine starts and runs very well. it has just been serviced and tested. The clutch engages and works. 
Location: 362 County Hwy 30 Jordanville, NY 13361
Call Steve: 570.460.0286

851
CNG Burn Table
10' x 30' with tracer eye, 400 stored shapes, burny five control system, plasma or oxiacceteline powered, good condition. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

852
Double Head Notcher
Brand new shop built, with indexable teeth, plunger feed, rated at 55 stringers per minute, line shaft ready. Includes dust blower. Located at: UPDATED! 726 Audrain RD 152 Clark MO 65243 Contact Eugene 260.350.8953

853
JD 4000 Cable Winch
4000 series, off of a JD Skidder, in good condition. located at: 407 Clark Store Sinking Fork RD Cerulean KY Contact Eugene 260.350.8953 

854
Transfer Deck
7' x 16', hydraulic drive, includes structural steel to ground. 
Location: 682 Latimer Hill Road, Canajoharie, NY 13317
Call Steve: 570.460.0286

950
Rough Cut Maple Slabs
26"x88", 2-3" thick, 10 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

951
Rough Cut Walnut Slabs
26-34"x94-96", 2-2 1/2" thick, 9 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

952
Rough Cut White Oak Slabs
30-42"x11'6", 1 3/4"-2 1/2" thick, 7 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

953
Rough Cut White Oak Slabs
50-55"x11'6", 2-2 1/2" thick, 4 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

954
Rough Cut White Pine Beams
6"x10"x12'3"-12'6" long, 42 total, Cut 2/22. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

955
Rough Cut Walnut Slabs
15-34"x48-52", 2-2 1/2" thick, 8 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

956
Rough Cut Spalted Maple Slabs
36-54"x112", 2-2 1/2" thick, 10 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

957
Rough Cut Spalted Maple Slabs
36-55"x9'8"-10', 2-3" thick, 6 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

958
Cherry Slabs
31"-38"x11', Kiln Dried, 2" thick, 2 pieces, 64 board feet each. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

959
Walnut Slabs
Kiln Dried 22"x10', 4 total, 2" thick. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

960
Walnut Slabs
Kiln Dried 2-(212"x7', 2 1/2" thick) 2-(13-21"x9', 1 1/2" thick) 4 pieces total. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

961
Walnut Slabs
Kiln Dried, 19-24"x8'x9'6", 2" thick, 6 total. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

962
Walnut Lumber
Kiln Dried, 81 board feet, 7/8" thick, 9' long, 4-6" wide. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

963
15/16" Hickory Lumber
934 Board feet, 4-7" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

964
4/4" Red Oak Lumber
622 Board feet, 4 1/2"-8 1/2" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

965
15/16" Hickory Lumber
329 Board feet, 4-9" wide, 12' Long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

966
5/8" Mixed Species Lumber
919 Board feet, 6-9" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

967
15/16" Red Oak Lumber
459 Board feet, 6-10" wide, 10' Long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

968
15/16" Red Oak Lumber
423 Board feet, 6-10" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

969
15/16" Red Oak Lumber
364 Board feet, 7-13" wide, 5-8' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

970
15/16" Hard Maple Lumber
658 Board feet, 8' Long, 6-11" wide. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

971
15/16" Hard Maple Lumber
504 Board feet, 10'6" long, 4-12" wide. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

972
13/16" Poplar Lumber
155 Board feet, 10'6" long, 6-9" wide. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

973
15/16" Red Oak Lumber
294 Board feet, 4-12" wide, 12'6" long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

974
15/16" Hard Maple Lumber
125 Board feet, 3-9" wide, 6'6" long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

975
15/16" Hickory Lumber
181 Board feet, 4-8" wide, 6' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

976
15/16" Red Oak Lumber
374 Board feet, 5-10" wide, 8' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

977
15/16" Hard Maple Lumber
1104 Board feet, 4-10" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

978
15/16" Hard Maple Lumber
922 Board feet, 5-9" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

979
15/16" Red Oak Lumber
264 Board feet, 3 1/2"-9" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

980
15/16" Hard Maple Lumber
660 Board feet, 4-12" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

981
15/16" Red Oak Lumber
292 Board feet, 6-9" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

982
4/4" Red Oak Lumber
469 Board feet, 5 1/2"-10 1/2" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

983
15/16" Hickory Lumber
481 Board feet, 5-11 1/2" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

10000

984
8/4" Hard Maple Lumber
411 Board feet, 6-16" wide, 8-10'6" long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

985
15/16" Red Oak Lumber
501 Board feet, 4-12" wide, 8-10'6'' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

986
15/16" Hard Maple Lumber
339 Board feet, 5-12" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

987
15/16" Hard Maple Lumber
963 Board feet, 5-10" wide, 8-10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

988
1 7/16" Hard Maple Lumber
313 Board feet, 6-14" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

989
15/16" Hard Maple Lumber
965 Board feet, 4-14" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.
Photo Gallery


















































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Sponsored Links

June 2022 Bright Star Virtual Consignment Auction

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
Various locations US
Various Locations, IN 46540
Sale Dates and Times
Saturday Jun 18, 2022 Completed
Sale Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. All items must be removed within 14 days unless otherwise noted. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. Any rigging or loading fees are at buyers expense.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Monthly virtual consignment auction. Online/phone bidding only. Consignments wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. This equipment is located at various locations, please note address and phone numbers in every description. Buyers have 14 days to remove equipment unless noted otherwise in description. 

00
Information Lot
June Virtual consignment auction. Please note locations and agent contact info  in each lot. Buyers have 14 days to remove equipment unless noted otherwise in description. Rigging is generally available on installed equipment. Rigging is an additional expense to buyer unless noted otherwise.

300
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box. Shipping available for $30

301
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Shipping available for $20

302
1/25 Scale Wood-Mizer LT-40 Super Hydraulic Sawmill
Still in original box. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Shipping is available at buyers expense. Call Jonathon 574.349.4380

399
Miner Edger
4''X32'' capacity, 2 blades, 1 movable (could both be movable) 3 spare blades (2 like new) belt tensioner is broke but otherwise in good condition. Located at: 8031 E Gallagher Lane Sumner IL Contact Eugene 260.350.8953

400
Twin Stenner Scragg Mill
It has 41 1/2'' band wheels, 5'' wide blade that is approximately 23' long, 30Kw 3-phase electric motors, weight strain, appears to be complete and is in unknown working condition. Item is located at 150 Seybert Ave White Pigeon Michigan 49099 Load out within 30 days. Call Bronson with questions 574-210-3721

401
Sanborn Mini Max Sawmill
It has a 4 head block carriage (1 head is not currently mounted), includes a 60 hp 460V 3-phase Westinghouse electric motor, 36'' band wheels the 1 1/8'' thickness, 5 1/2'' blade that is approximately 21' long, includes mud saw, includes hydraulic controls but no hydraulic unit. Item is located at 150 Seybert Ave White Pigeon Michigan 49099 Load out within 30 days. Call Bronson with questions 574-210-3721

402
Gear Box 34:1 Ratio
It has 54 tooth double sprockets and a coupling mount for a motor.  Item is located at 150 Seybert Ave White Pigeon Michigan 49099 Load out within 30 days. Call Bronson with questions 574-210-3721

402A
West Plains 3-Head Re-Saw
Model-WPRS-JRBS, SN- 732, Made in 1996, 6" chain conveyor feed with hydraulic drive, 5 hp hydraulic pack, 36" band wheels, 1 1/2" bands, 20 hp electric motors on heads, Very good condition, Production ready. Located at 11751 Co Rd 12, Middlebury, IN 46540. Call Eugene with any questions at 260-350-8953. 

403
Smith 2 Head Resaw w/ Return
1 1/4" band. Line shaft ready, ready for production. Located at 3455 Nickless Rd. Gladwin, MI 48624. Call Jonathon 574.349.4380

404
End-Around
Hydraulic drive. Located at 3455 Nickless Rd. Gladwin, MI 48624. Call Jonathon 574.349.4380

405
Detroit Series 60 Diesel Engine
330 HP, SN 06R0237772, new unit in 2016, meter reads 12,550 hrs. first lot of an entirety. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

406
Hydraulic Unit
2 pumps, jack shaft, made by Georgetown Hydraulics, mounted on 6' x 20' I Beam frame, Vickers hydraulic motor Eaton motor 104-1025-006 used on vibrating conveyor, Permico Hydraulic motor M257A731RRZA-15 used on blower. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

407
Quincy Air Compressor
Rebuilt in 8-27-19. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

408
Belt Driven Generator
15KW, Stamford. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

409
Entirety with 10% Raise 405-408
Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

409B
Timberking Talon 900 Portable Edger
Kohler command 25 engine, 2 blade, 1 moveable, 21'' x 56'' out feed belt, 21'' x 56'' infeed belt. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

410
CSI Buck Saw with Log Rack
MN DL-4400,SN4405071179, 7' x 16' saw rack, 5' saw blade, hydraulic drive. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380 

411
4 Strand Transfer
Hydraulic drive, 9' x 7'. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

412
Live Rollcase with 4 Arm Popup Transfer
with control box, 3' x 20', no drive, 6 1/2'' x 30'' rolls. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

413
Rollcase
12V over air controls, spiral rolls, no drive, 30'' x 17'6'', 6 1/2'' x 24'' rolls. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

414
Slab dump
110V over air controls, air lift cylinder, 36'' x 10'. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

415
Bumper Stops and Cable Pulleys
16'' cable pulley, frame 57'' outsider. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

416
Oil Cooler Fan
30'' x22'' radiator, hydraulic motor. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

417
Detroit Diesel Engine Series 50
Approx. 14000 total hours, newer radiator and control panel, Clutch and pulley, 6V belts C-244, 6V belts C-132. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

418
Deutz Diesel Engine
Type BF6L914C, fits on 419 platform, meter reads 8,888 hrs. First lot of an entirety.  Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

419
Hydraulic Pack with 3 Pumps on Platform
110 gallon pump, Hub City pump drive, pressure comp 40 gallon, 45 VQ pump runs 45M Vickers motor, filters and valves, 48'' x 48'' x 32'' tank, new inserts for pumps, jackshaft.Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

420
Lot # 418-419 with 10% Raise
Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

421
Oil Cooler
34'' x 32''x 10'' oil cooler, 3 HP electric.Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

422
Shafts with Pulley and Bearing
2 15/16'' x 80''shaft, 2 15/16'' x 48'' shaft, 8 groove pulley 13 1/2'', 4 groove pulley 13 1/2''. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

423
Hydraulic Pack
4 pumps, 2- 24 gallon Permco, 2- 20 gallon Vickers, mounted on frame with jackshaft, 51'' x 88'' frame, 48'' x 24'' x 30'' tank. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

424
Cleereman Carriage 3HB
model 36, SN36-214, panograph, oil tank for track oiler, 110V over air setworks, bottom dog turners, first lot of an entirety. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

424A
Air Cylinders for Cleereman Carriage
 Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

425
Carriage Drive Feed
Pump setup for line shaft, directional valve. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

426
Carriage Drive Hydraulic Cable Drum
5/8'' Cable. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

427
Silvatech Setworks NOT PART OF THE ENTIRETY
Was used on model 38. Complete works. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

429
Entirety with 10% Raise 424-428
Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

428
Parts for Cleereman Carriage
 Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

430
Reckart Edger (First Lot of Entirety)
MN 42E,SN 87012, 3 Stationary 2 moving blades, 20''blades, hydraulic cylinder on blade set, 3 feed rolls have been rebuilt, hydraulic drive, 6'' x 42'' capacity. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

675
Delta Radial Arm Saw
32"x48" table top, 64" tall, 18" blade, SN-89F31337, Needs new contactor. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

431
In Feed Rolls
4' x 10', side press roll with air cylinder, hydraulic controls. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

432
2 Belt Tailing System
19'' x 17' with 15 1/2'' belt, 6 1/2'' x 17' with 5'' belt, frame with press down rolls. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

433
Entirety - Lots 430-432 with 10% Raise
 Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

434
New Feed Roll for Edger
6'' x 44'' with 1 3/4'' shaft 60'' long. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

435
Edger Blades
12 pcs.22'', 8pcs.20''. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

436
Edger Spacers and Parts
Hydraulic motor, housing cracked. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

437
Clutch
Size 14T, needs repair. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

438
Hydraulic Pump and Motor
Pumps for 50 HP, carriage drive. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

439
Carriage Track
6 pc.14' plus 4 shorter ones. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

440
Frick Double End Trimsaw
20', SN 1064, 20'' saw blade, 2 moving saws. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

441
Cleereman Carriage 36''
Air setworks, needs rebuilt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

442
Hydraulic Pack
2 15/16'' x 80''shaft, mounted on skid, 37'' x 14'' x 23'' tank. Was used with the Deutz unit lot 418. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

443
Cyclone Stainless Steel
24'' x26'' x 61'' metal stand, 32'' x 6'. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

444
Belt Conveyor
12'' sides, hydraulic drive, 52'' x 18' x 48'' belt, cleated belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

445
Belt Conveyor
Hydraulic drive, 52'' x 15', 48'' belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

446
Belt Conveyor
Hydraulic drive, 42'' x 15', 30'' belt, cleated belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

447
Belt Conveyor
Hydraulic drive, 54'' x 34', 6 sides, 47'' belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

448
Rollcase with Board Kicker
No drive, hydraulic cylinder on kickers with 110 controls, 36'' x 24', 6 1/2'' x 30'' rolls. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

449
Pettibone Telehandler B-68
Parts machine. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

450
Hydraulic Cylinder 3 Stage
5 1/2'' x 55'', 3 stage cylinder for Pettibone. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

451
3 Clutches
Model 214. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

452
Cleereman Controls
Was used with lot # 441. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

453
Hydraulic Motor
Skid of motors and parts (assorted). Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

454
Oil Cooler Radiator
Shop built with hydraulic motor, radiator with small leak. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

454A
2 Head Wood-Mizer Horizontal Resaw
Hydraulic blade tension, hydraulic motors on end, press down rolls, hydraulic driven, 1 1/4'' bands, 7/8'' x 34'' band wheels, SN MH2D9406177, 6'' x 11' feed thru web belt. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454B
Morgan Single Head Resaw
1'' x 24'' wheel, 1 1/4'' band, hydraulic drive, 6'' x 14' feed belt, 8'' x 7' cant return belt, air tire press down rolls, gear box on belt feed needs new seals. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454C
Stutsman Cant Sizer
4'' x 6'' capacity, hydraulic drive feed rolls, 6'' x 6' 6'' side pressure belt, 6'' x 38'' infeed/outfeed belt, hydraulic driven. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454D
Morgan Board Deduster
hydraulic drive, 6'' x 5' infeed/outfeed belt hydraulic driven, press down roll needs new tire, SN 100603171. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454E
Transfer Belt
24'' x 10' hydraulic drive. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

455
Trash Hopper
36 1/2'' x 31'',self dumping, caster wheels. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

456
Trash Hopper
36 1/2'' x 31'',self dumping, caster wheels. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

457
Trash Hopper
36 1/2'' x 28, self dumping. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

458
Logisol 4-Sided Molder
Model # PH260 Hydraulic drive, electric feed, tongue and groove,knives,12''x 4'' outfeed, and "new" 5' infeed, top and bottom planers have no knives, hydraulic pumps for planer, jack shafts and mount, electric control box, motor starter. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

459
Hydraulic Tank
40'' x 16'' x 28''. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

459A
Fuel Tank
38'' x 60'',on stand, stand needs welded. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

459Z
Information Lot
Selling the excess equipment for Squier Pallet in Waterloo IN. Not to interfere with the successful ongoing operation of Squier Pallet. Be sure to check out these quality well maintained items most of them being one owner.
Loadout is available. Please have all uninstalled equipment & rolling stock removed within 2 weeks. 45 days for removal of installed equipment.
 Experienced Rigger Paul Avery 270.543.1919 is fully insured and committed to this job. Rigging is at the buyers expense. 

460
2006 Mellott Rosserhead Debarker
MN MR48, SN 0670C202, Pantograph arm, 54' x 6' x 88''high operator cab, airhead lift cylinder, 2-10,000 series hydraulic motors on wheels, all controls in cab, (Pilot controls) 75 HP electric on head, 3'' x 24'' bull wheels, 1 owner machine, 50 HP electric on hydraulic pack, hydraulic motor on chain feed, joystick controls, heat and AC, Item # 70C-2, support to ground, 14' 6'' outside to outside bull wheels, Date 5-06. VERY GOOD CONDITION! Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

461
Barn Sweep Barn Conveyor
18'' paddles, 46'' x 26' flat, 20' on incline, electric drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953. 

462
Mellot 5-Strand Log Deck
Support steel to ground, runs off debarker ( hydraulic), stop and load, hydraulic cylinder on stop and load, 10' x 28', Tulsa gear with hydraulic motor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

463
Cleereman Carriage 3HB
2006 Model #  420, SN 420-893-06, hydraulic setworks drive, air dogs, 16' long, controls in cab, set shaft proportional carriage, Paw Taw John setworks, 1 owner machine, 4 axles, pantograph and support post. This mill only ran an average of 2.5 days a week.A WELL MAINTAINED VERY NICE MILL!  1st lot of an entirety.  Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

464
Cleereman Track and Frame
Bumpers on ends, 58'' C-C x 50', support to ground. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

465
Tyrone Berry Feed and Drive
Feed was new in 2016, MN SMA220, SN 12780, control valve in cab, 60 HP electric, remote oil cooler, 5/8'' cable, 20'' Idler wheel. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

466
Cleereman 56'' Husk Frame with Top Saw
56'' saw, 4' x 8' frame, 32'' top saw, 24'' x 5' off bear belt. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

467
Lincoln Electric Motor
150 HP, frame 444T, 1,780 RPM, 480 V. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

468
Electric Hydraulic Pack
10 HP, 36'' x 14'' x 24'' tank, used on setworks, electric oil heater. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

469
Cleereman Operators Cab
Steps and Catwalk support to ground, heat and AC, 54'' x 96'' x80'' high. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

469A
Cleereman Entirety 463-469
With 10% raise. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

470
Cedar Creek 4 Blade Vertical Edger
No controls, splined shaft, 24'' saws, F7 style, 75 HP electric motor, 8'' x 40'' capacity. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

471
Mellott Log Turner
control valve in cab, hydraulic drive, 48'' chain drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

472
Mellot 5-Strand Log Deck
stop and load hydraulic cylinder, support to ground, Tulsa winch gear box with hydraulic drive, 10' x 22' (from debarker log stop), 52'' nose skids. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

473
Hydraulic Pump
Was run off mandrel, use for turner, 18'' x 20'' x 15'' tank. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

474
Transfer Belt
Built on Mellott rollcase frame, 31'' x 12' spiral rollcase built on end, support to ground, 36'' x 25' x 8'' sides, 22'' pan, 22'' belt. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

474A
Barn Sweep Bark Conveyor
Under debarker, electric drive, 44'' x 30' to incline, 30' incline, 60' total. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

475
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

476
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

477
56'' Saw Blade
BF style, has broken shoulder. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

478
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

479
56'' Saw Blade
BF style, marked spare only. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

480
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

481
Parts for Vertical Edger
New splined shaft, control valves, rubber coupling, Edger probes, brass pins, bearings, laser lights. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

482
Parts for Cleereman Carriage
Mac valves, turner teeth, brake pads, sprockets, arbor saw plates and collars. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

483
Cylinders for Edger Carriage
2 pc.- hydraulic 30'' stroke, 2pc. Hydraulic 24'' stroke, 1 pc. Air 18'' stroke. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

484
Skid of Parts & Jockey Grinders
2-jockey grinders (1 is new), blades for grinders for carbide teeth, saw wrenches, hydraulic motor, new Danfo's OMS 315. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

485
Bungee Rope for Debarker
1'', debarker carriage valve, belts, joystick handles for debarker controls, Carbide teeth for debarker. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

486
Debarker Parts
Head bearing, carriage wheels, cylinders for head, cylinders for stop and load. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

487
5/8'' Cable for Carriage Drive
2 pc-5/8'' x 100', 1 pc. 5/8'' x 65'. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

488
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

489
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

490
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

491
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

492
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

493
Mellott Log Turner
48'' chain type, hydraulic drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

494
Brett Single Head Knotcher
Hydraulic feed, SN 7811, MN NA100. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

495
Pendu Cant Sizer
Horizontal head. Carbide index bit spiral head, 12'' wide x 10'' high capacity, 30 HP electric motor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

496
Baker Twin Head Band Resaw
MN BBR-O, SN 96-1714, 13/16'' x 28'' wheels, 6'' x 17' feed thru belt, 6'' x 25' cant return belt, 20 HP electric on heads, electric drive on feed, 1 1/4'' band, air cylinder side press wheels, Pendu 16'' blower, 10 HP electric. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

497
Baker Side Transfer Belt
Hydraulic drive, 5 1/2'' x 40'' side shift belt, 24'' x 5', 21'' belt. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

498
Viking Turbo 505 Automatic Pallet Nailer and Stacker
New in 2006, This is the 505 long model, with a max capacity of 60''X72'' (72'' stringers) and min. of 28''X28'' Fully automated, pallet flipper, hopper feed for nails, set up for 3 runners but has parts for 4,  fully automatic stacker, 6' x 12' stack take out skate rolls, very good condition, 1 owner machine. Very nice unit! Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

500A
Marksman Matrix Laser Printer
Foxjet Pro-series 384, SN FXJT82501573,MN MKMATRIX, input 240, paints 2 sides of pallet. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

501
Spare Parts for Printer
Repaired printer head, Marksman duo fox jet, 2 bottles ink. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

502
Viking Gear Box for Turner
 Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

503
Leeson Electric Motor
10 HP, 3,520 RPM, frame 215T2, for Viking hydraulic pack. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

504
Electric Motor
For pallet turner on Viking nailer. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

505
Viking Stacker Gear Box
 Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

506
Viking Right Angle Electric Motor and Gear Box
0.5 HP, for conveyor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

507
Pallet of Viking Parts
Limit switches, control cable, air cylinder. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

9022
Pitts Log Trailer
44' long Tri-axle trailer with 11 Bunks spaced 6'6'" apart (see photos)
Tires and brakes are in good condition, current inspection valid.

508
Pallet of Viking Parts
Electric switches, seals, roller chain connecting links, control cable, photo eye sensors. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

9023
Flatbed Trailer
53' by 102" trailer

509
Pallet of Viking Parts
sprockets, electric switches, photo eye sensors, air cylinder. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

9024
Western Star Tractor
2000 Western Star 4964F Conventional with Sleeper, Cat 3406 425HP, 10 speed Eaton Transmission.

9031
Grapple Forks
60" Grapple Rake, New condition only used twice.

510
Pallet of Hose for Viking
Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

511
Pallet of Viking Parts
 Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

512
Pallet of Viking Parts
electric switches, air cylinders, photo eye sensors, hydraulic motors, control cable. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

513
Pallet of Viking Parts
Sprockets, chains, gear box, Parker valve, control cables. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

514
Pallet of Viking Parts
Electric switches, photo eye sensors, cylinders, gear box. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

515
Pallet of Viking Parts
Sprockets, gear boxes, cylinders, photo eye sensors, Parker valve, hydraulic motor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

516
NEW Portable Dust Blower
Has clear plexiglass cyclone, dust collection barrel, return air filter, 12" blower, 5 HP direct drive, 230 V, 6" inlet. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953  

517
Belt Conveyor
12" x 25' electric drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

519
AMW Horizontal Resaw
Wood-Mizer, meter reads 514 hrs., Kohler command, MN HR120G15,SN 12091031,15'' feed, 12'' belt, 74'' long,12V motor on feed belt, 18 3/4'' band wheel fits 1/2'' band, 28'' x 7 1/2'' press down bar, no battery, Ro. 15 motor. Located at 12973 Sawmill Rd. Allensville, PA 17002. Call Jonathon 574.349.4380

520
DISA 36" Dust Blower
Model-040-315-CCW-S, 15 hp electric motor, 16" inlet and 16" outlet. Located at 52240 CR 35 Bristol, IN 46540. Call Eugene with any questions at 260-350-8953.

521
Cyclone
32"x6' tall, Includes stand. Located at 52240 CR 35 Bristol, IN 46540. Call Eugene with any questions at 260-350-8953.

522
Woodpecker Downy Pallet Nailer
Model-Downy-60x70-071211-1L, Includes Hawkeye stacker, 110 firing system, Everything else is fully air powered, In good running condition, Everything works as it should, Machine was partially updated in 2018. ONLY NAILED 138,000 pallets in its entire lifetime!! Does not include nailers. Located at 52240 CR 35 Bristol, IN 46540. Call Eugene with any questions at 260-350-8953.

550
1938 Allis-Chalmers Model B Tractor
It has a 17 horse power 4-cylinder gas engine a 3-speed transmission with reverse. It comes with a PTO, rear belt pulley and is crank start only.  It is in good running condition.  Serial Number: B2912 Location: 4387 SR 331, Bremen, IN 46506. Call Bronson with questions 574-210-3721 

551
New Holland LS180B Skid Steer
Meter reads 1200 hours, enclosed cab but door is missing, Forks in photos are not included. sells with a bucket only, good working condition. Located at: 5916 Windsor RD Union Grove NC 28689 Contact Eugene 260.350.8953

579
2016 Case 588H Forklift
4 wheel drive, side shift, 3 stage, meter reads 433 hrs., heater, fan,  AC, Jensen radio, air ride seat, Case engine, 60 1/2'' wide, 48'' long forks, 9' 5'' mast, like new, one owner machine! PIN JJGN580HAFC728193, new in 2016. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

579A
Linde H30D Forklift
Meter reads 6450 hours, Volkswagen diesel engine, sideshift, tilts forward to 60 degrees, solid belting wheels but solid rubber wheels are included, runs and operates great but does not drive due to safety code T-326, get rid of the code and you will have a great machine. RESERVED TILL JULY 1st FOR LOADOUT.
Location: 5579 St Rt 414. Romulus, NY 14541.
Call Steve 570.460.0286

580
Toyota Forklift
Model-52-6FGCU30, SN-60834, 5,000 lb weight capacity, Meter reads 11,578 hours, engine was rebuilt approx. 2000 hrs. ago. solid tires, Has side shift, 5"x48" forks, 39"x87" tall three stage mast, works great. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478. RESERVED UNTIL JULY 1ST FOR LOADOUT

581
Toyota Forklift
FREE DELIVERY WITHIN 500 MILE RADIUS! Meter reads 24,140 hours as of 6-17-22,   Model-02-6FDU35, SN-60439, 7,000 lb capacity, Machine weight-13,686 lb, Has side shift, 3-stage mast, Pneumatic tires, Toyota diesel engine, Very good running machine, Everything works as it should. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

582
Pettibone Model B-68
MN B68-C,SN 7-509, quick attach system, runs and operates, good foam filled tires. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

583
Quick Attach Block Forks for Pettibone
4 prongs 48'' long. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

IM31550

584
Cat Forklift
5000 lb lift capacity, 3 stage, propane, meter reads  999 hrs. solid cushion tires, good working condition. Located at: W 14958 Babit Ave Gilman WI Contact Eugene 260.350.8953

585
Daewoo G35S Foklift
8000 lb lift capacity, meter reads 2896 hrs. enclosed cab, 3 stage, propane, Solid pneumatic tires, good working condition. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

586
JLG 2646 Scissor Lift
Electric, 26' lift w-extendable platform, good working condition. meter reads 986 hrs.. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

600
2004 Volvo L45B Wheel Loader
Hydraulic system was rebuilt. 4500 hours. Some seepage around engine. Quick attach. No attachments. The engine hood plastics has a few cracks (see pictures). Good working condition. Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

601
John Deere TC54H Wheel Loader
Meter reads 8,116 hrs., has third valve, AC and heat, quick attach, joystick controls, AM/FM radio, air ride seat, PIN DWTC541H589439, John Deere motor, good condition, no forks or buckets, CLEAN 1 owner machine, Engine SN 6068TDW50. DOES NOT INCLUDE ANY ATTACHMENTS. The forks sell as lot # 604. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

602
Case 621D Wheel Loader
Meter reads 5,150 hrs..,AC and heat, joystick controls, Case engine, 1 owner machine, 70'' wide, 46'' long forks, MN 621D, PIN JFF0137419, very good condition. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

603
Case 621B Wheel Loader
Meter reads 9,005 hrs., joystick controls, air ride seat, Case engine, 70'' wide, 38 1/2'' long forks, MN 621B, PIN JEE0051878,  good condition, heat, no AC Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

604
Quick Attach Grapple Forks
66 1/2'' wide, 37'' long forks, fits John Deere TC54H. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

605
Pin On Loader Bucket
31'' x 99 1/2'' wide, 47 1/2'' deep, fits 621D loader. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

606
Trojan 1500 Wheel Loader
Trojan 1500 Wheel Loader - Cummins 4 cyl. engine, starts and runs well, hydraulics are somewhat slow. Some hydraulic leaks, machine is in fair condition, the forks are 48"x 5" x 1 3/4".
Location: 682 Latimer Hill Road, Canajoharie, NY 13317 Contact: Steve 570.460.0286

607
Loader Bucket with Forks
The Bucket with Forks fit the Trojan Wheel Loader.. This an 8' combination style Bucket. The forks are 48" long with 45" usable due to gussets welded in the corners, they are 6" wide x 2" thick. 
Location: 682 Latimer Hill Road, Canajoharie, NY 13317
Contact: Steve 570.460.0286

608
Forks 60"
Forks are on a 1 15/16" shaft and measure 60" long x 7" wide x 2" thick. 
Location: 682 Latimer Hill Road, Canajoharie, NY 13317
Contact: Steve 570.460.0286

620
2012 Case 750L Crawler Dozer
PIN NBDC70004, meter reads 4450 hours, 6-way blade, 3-tooth ripper attachment, Fully enclosed cab with Heat/AC, Joystick controls, good sprockets, undercarriage in good condition. Very good running machine. Located at 1505 Heide Cooper Rd. Shanks, WV 26761. Call Jonathon 574.349.4380

621
1993 John Deere 550G Dozer
PIN T0550GH793920, meter reads 11,650 hours, only 200 hours on new undercarriage, John Deere engine, open cab, 33" x 105" 6- way blade, 18" wide tracks, 5 roller, long track, very good condition. Arrangement for Ohio delivery available. Reason for selling is seller upgraded to bigger machine. Located at 5683 Hoffman Norton Rd. Bristolville, OH 44402. Call Daniel at 440.693.4232.

629
2006 Chevrolet Silverado Pickup Truck, VIN # 2GCEK13T761220843
Year: 2006
Make: Chevrolet
Model: Silverado
Mileage: meter reads 250,735
Body Type: 4 Door Cab; Crew
Trim Level: LS; LT; Z71
Drive Line: 4WD
Engine Type: V8, 5.3L
Fuel Type: Gasoline
Transmission: automatic
VIN #: 2GCEK13T761220843

Features and Notes: Clean title, good running truck. Located at 1505 Heide Cooper Rd. Shanks, WV 26761. Call Jonathon 574.349.4380

630
2015 Peterbilt 388 Log Truck w/ 2019 Serco 8500 Self Loader
Year: 2015
Make: Peterbilt
Model: 388
Mileage: meter reads 549,720
Engine Type: Cummins L6, 14.9L; Turbo, no def
Fuel Type: Diesel
Horsepower: 625
Transmission: 18 speed Eaton Fuller
VIN #: 1NPWX4EXXFD258118

Features and Notes: 6 axles, 46,000 lb. rear axles, 20,000 lb. front axles, gross weight 85,000 lb. light weight 38,000 lb. 336" wheel base, steerable axle, full lock in rears, double frame, 26' bunk, all gauges work, new PTO, new pump, all new drums, brakes, and pads. Disc brakes in front, Jake brake, cruise, power windows, air suspension. Loader is 22' w/ 4' extension, continuous swivel Rotobec grapple, no leaks. Very good running truck. Clean title.
Located at: 1885 Kinsman Rd. NE North Bloomfield, Ohio 44450. Call Jonathon 574.349.4380

630A
2010 Kenworth W900 Truck, VIN # 1XKWD40X4AJ260307
Year: 2010
Make: Kenworth
Model: W900
Vehicle Type: Truck
Mileage: meter reads 292,000
Drive Line: 6x4
Engine Type: L6, 14.9L; Turbo
Fuel Type: Diesel
VIN #: 1XKWD40X4AJ260307

Features and Notes: Approx. 650 HP Cummins engine, I S x 18 speed, Virgin Michelin tires, It has a wet kit that will operate live floors. double frame, Chalmers suspension, 13,200 lb. front axle, 23,000 lb. (each) rear axles, New rebuilt transmission and clutch with 3 yr. warranty, meter reads 292,000 mi., no DEF, This truck is built to be an off road machine. THIS IS ONE NICE CLEAN MACHINE. A RARE FIND!! Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

630B
TOTALLED International Truck
Truck itself is totalled but has very good Cummins engine with Approximately 175-200,000 miles. 1 fuel tank, the headache rack, toolboxes, and a few tires are still in good condition as well. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

630C
Portable Dock Ramp
56"x32' long, 48" ramp height. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

630D
2,000 Dorsy Reefer Trailer
48 ft. spread axle, aluminum wheels, the whole inside floor is aluminum, side walls are not damaged, clean interior, everything is in good shape. No Reefer unit, road ready, with title and license. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

631
2006 John Deere 437C Knuckleboom
Serial # WC437CL013149, Good running machine. meter reads 16,061 hours, CSI 264 delimber, continuous Rotobec grapple. Heat, A/C, lights, and wipers all in working condition. Mounted on Pitts Kodiak series 3 hydraulic trailer with bucksaw hookups. Clean machine and ready for production. Located at 35359 State Route 143, Pomeroy, OH 45769. Call Jonathon 574.349.4380

631A
John Deere 435C Knuckle Boom Loader with Delimber
SN WC435 x 012259,model 435C,mounted on Big John trailer, brakes on trailer not working,1 rim will be fixed by sale time, engine SN PE6068T555876,heater and AC, nice clean machine, no blade, CTR Delimber with saw, current owner didn't use delimber, meter reads 13,017,hand fuel transfer pump, remote hydraulic hook up, Rotobec grapple, good tires, a well maintained machine, engine was rebuilt at 11,288 hrs. Located at 12973 Sawmill Rd. Allensville, PA 17002. Call Jonathon 574.349.4380

631B
CSI Bucksaw with Log Rack
5' saw blade, hydraulic drive, 6' x 20'. Located at 12973 Sawmill Rd. Allensville, PA 17002. Call Jonathon 574.349.4380

632
Prentice 310E Knuckleboom
Mounted on Pitts Trailer(SN-KB45T3SP950400), Less than 300 hours since complete engine rebuild, pumps replaced, and everything on undercarriage except bearing was replaced, SN-7206782, Made in 2000, Bucksaw hookups, Cab has Heat/AC and radio, Joystick controls, has Prentice continuous swivel bypass bucket, Meter read 9775 hours, Good running machine. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

632A
CTR De-Limber
Direct drive, 36" bar, Good condition. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

632B
Super Grip Grapple
Came off of a Timber Pro forwarder. Fully rebuilt and ready for use, Has not been used since rebuild. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

633
John Deere 335 Knuckle Boom Loader with Delimber
Runs and operates but engine needs rebuilt, hydraulic remote hook up, hydraulic works good, Barko 4250 grapple, meter reads 5,915 hrs. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

634
Timberking TK520 Knuckleboom
Meter reads 2,039 hrs., Cat engine M3065E,SN TK520PR59939, 50% thread on tires, good trailer, heat and AC, SN 35601172, MN TK520, Rotobec, grapple, SN 3070016RO-538378, MN 4642-B-BEL-F5-5, good running machine, new turn table bearing and seals, new injector pump. Located at 8814 Township Rd. 559 Millersburg, OH 43824. Call Eugene 260-350-8953.

635
Morbark Portable Chipper
1991 Chipper/waste recycler, w-cab, has self sustained knuckleboom, self contained hyd. unit, hasn't ran much in years, has some hyd. leaks, road ready although lights could be questionable. 1st lot of an entirety. Located at: 11606 Brickyard RD Holton MI 49425 Contact Eugene 260.350.8953

636
Cummins Power Unit
650 HP w-clutch, start right up and runs good. Meter reads 1451 hrs. located at: 11606 Brickyard RD  Holton MI Contact Eugene 260.350.8953

637
Entirety for Lots 635 & 636
Complete chip/recycler unit with power unit. Located at: 11606 Brickyard RD Holton MI Contact Eugene 260.350.8953

638
Vermeer HG200 Portable Horizontal Grinder
Includes pallet of extra parts(screens,teeth, etc.), Pintle hitch, Meter reads 57 hours but machine is believed to have 1700 original hrs. Powered by a 4 cylinder Cumins, Approx. 120 HP. Belt conveyor infeed, Fold-up conveyor outfeed, 16"x24" infeed capacity, VIN-1VR2171K561000139, Good running machine in good condition. NICE UNIT! Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

639
2012 Dyna Firewood Processor
Model-SC-14, SN-18201, 6'x6' fold up 3-strand infeed deck, Kohler CH940 gas engine(SN-4108800171), Pulls with 2" ball, Hydraulic pumps and cylinders on everything, 24" cut-off bar, 10'6" chain conveyor, 12' adjustable incline belt conveyor-12" belt, Hydraulic controls, Includes 4-way and 6-way splitting heads, Everything works as it should, Good working machine. Located at 12722 Co Rd 2 Edon,OH 43518. Call Jonathon with any questions at 574-349-4380.

640
New Portable Saw Mill
It is powered by a 14 hp 429cc Kohler gas engine with a centrifugal clutch and has a 2'000 lb winch to raise and lower the head. It has a 16' capacity and uses 1 1/4'' blades.  Brand new and never used.  Item is located at 150 Seybert Ave White Pigeon Michigan 49099. Load out within 30 days. Call Bronson with questions 574-210-3721 

640A
2022 NEW Timber Buddy MP362 Portable Sawmill
Manual production mill. See description in photos.
Location: 5579 St Rt 414 Romulus, NY 14541.
Contact: Steve 570.460.0286

640B
Lumber Tiger Band Mill
2001  690 Hrs. total run time on this mill!! Was completely refurbished & updated by Lumber Tiger in 2021,Fully hydraulic, Kubota  Diesel power unit,  bed is 40' long (36' log capacity) however 20' section can be removed, 36'' band wheels, 3.5'' drive shaft, 48'' opening between guides,  two hyd. turners, hyd. feed, up & down & squaring pins are hyd. one hyd. dog,  2 manual dogs, 2 hyd. tapers/rollers, 1 manual taper, no leaks, This is a HEAVY DUTY mill that was never used hard and is in very good condition! Located at 7095 ST RT 534 West Farmington OH 44491  Contact Eugene 260.350.8953

641
2016 Wood-Mizer LT70 Portable Bandmill
(sn: 456C72412FNKA4003)  mfg. date 10-13-15, hours 1979, includes laser debarker head.  Added Woodmizer Bracing on Shaft.  Yanmar Diesel Engine.  35-40 extra blades most new.  Loader Available for loading.  Owner recommends a flatbed for transport.  Located @ 87 I-B Maynard Street, Spencer, TN 38585  Contact Zach for more information.  Loading available 7 days a week with appointment.  

641A
2010 LT70 Super Wood -Mizer Band Mill
12,000 hrs, fully loaded, debarker, has the updated DCS control module with accuset II setworks, 55 HP Yanmar diesel, 36''X20' log capacity, has been well maintained but could use some work on the track. Located at: 3385 Armenian RD Sherman NY 14781 Contact Eugene 260.350.8953 

642
2014 TimberKing 2000 Band Mill
1 owner machine. SN: 1433. Fully hydraulic with computer setworks. 35 HP Kubota diesel. Only 1500 hrs. Always under roof. We removed the log loader attachment to use a separate log deck(not included). Log loader attachment will sell with machine. Has the Timberking board drag back system. Is currently set up to saw stationary but is a portable mill and axle with like new tires is included. Blade height from deck will go to 29”. Can saw up to 20’ log. Can handle very large logs due to deep cut throat. Is set up to use 1 1/2” bands but can be set up for 1 1/4”. Bi-directional chain log turner. In-line log debarker. All kinds of extra parts. A very nice high production portable band sawmill. Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

643
2014 Cooks AC-36 Thin Kerf Portable Sawmill
Meter reads 2177 hours with second engine, total hours on mill are unknown, has minimal wear and is overall in good working condition. 1 1/2'' x 26'' band wheels, 2''bands, Murphy controls on engine, skid of parts, Cat diesel engine, debarker, fully hydraulic, unitronics computer controls,12V. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

645
2020 Wood-Mizer LT40 Portable Sawmill
VIN 456062412LNKK7459, 36" x 21' log capacity, 35 HP Kohler gas engine, fully hydraulic, wide throat, debarker, only 58 hours, includes manuals, always stored inside, like new condition. overall dimensions 7' x 26' 4". Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

646
Wood-Mizer LT30 Portable Sawmill
VIN 456B420102NCJ4623, meter reads 1404 hours, debarker, log turner, Kohler 25 HP gas engine, includes manual and 20 extra blades. No axle. Always stored inside. Very good condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

650
1999 Woodmizer LT40 Portable Bandmill
VIN-456A32416XNEG9255, Meter reads 5508 hours, 1 1/2"x13'2" bands, 1"x18" band wheels, Kohler gas engine(SN-4717202071) has less than 500 hours, Approximately 25 hp, Manual controls, Has debarker attachment, Pulls with 2" ball hitch, 44"x8' log bed, 24' overall, Lights do not work, Includes 5 new blades and approximately 50 used blades, Various spare parts included, Everything works as it should, Good machine ready for production. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

651
Woodmizer LT40 Log Bed Extension
44"x24', Includes drive chain to hook up to LT40 mill, Good condition. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

652
Wood-Mizer LT30 Portable Sawmill
Serial # 01851412AL, Kohler 25 HP engine, works good. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

653
Wood-Mizer BMS250 Sharpener
BRAND NEW!! comes with a new 5'' Turbo grinding stone, & 5 gallons of sharpening oil.  Located at: 11606 Brickyard Rd Holton MI Contact Eugene 260.350.8953

660
Portable Band Mill
Set up for line shaft drive, Manual head and blade set, 1"x24" band wheels, 1 1/2" bands, 34' overall, 28"x18' log bed, 1/4" steel cable, Shop-built. Located at 1461 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380.

661
Cummins Power Unit
65 hp, SN-53125291, Model-4A2.3-P, Includes 12 gallon fuel tank, Meter reads 2860 hours, 2500 rpm, 12V battery. Located at 1461 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380.

662
Band Saw Blades
1 1/2"x14'10", 60 blades total, 30 used, 30 new in box. Located at 1461 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380.

663
Head Rig, Carriage, and Track
Shop Built, 1 1/2" x14'6" bands, Set up for PTO drive, Handset controls, 1"x24" bandwheels, 32"x15' carriage, 27" center to center of tracks, 40' long track(in (2) 20' sections, 1/4" cable. Located at 490 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380

664
Crown Electric Pallet Jack
Not currently working, Unsure of issue, 4"x42" forks, 3500 lb. capacity, SN-1A165566, Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

665
Tyler XL Bandsaw
SN-4039-98, 460V, Has power feed rolls, 2"x36'' bandwheels, 2" bands, 20 hp electric motor. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

666
Diehl Straight Line Rip Saw
Model-SL52, SN-73M-3260-2459, 80"x8' tabletop, 5' tall, 440 V, 220 plug in. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

667
Diehl 750 Straight Line Rip Saw
220 plug in, 55"x78" tabletop, 56" tall, In working condition. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

668
Weima Horizontal Grinder and Conveyor
Meter reads 12,947 hours, Made in 2014, Model-WLH300, Machine #-600-674, 460 V, Electric drive, 6"x11" infeed capacity, Includes electrical box with soft start, Includes 47' of vibrating conveyor infeed with electric drive, 10" pan, 4" sides, In very good condition. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

669
Doucet Return Table
Model-FB-24-3-9-G, SN-7004-10-220, Needs to be assembled, Electric drive. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

669A
Paul Optimizing Chop Saw
Model # MAXV4.OMV, serial # 99-908.06, has power infeed. Located at 2935 N 500 W. Shipshewana, IN 46565. Call Dan 330.749.9478

669B
Ladiag Silo Unloader
Model# 4345
Serial# SN1924345
Complete in operating condition
7.5 hp. Hydraulic power unit
New in 2020 hydraulic rotary union
No electrical controls.
Located at 2935 N 500 W. Shipshewana, IN 46565. Call Dan 330.749.9478
 

670
Delta Table Saw
43"x60" table top, 3' tall, 14" blade, Electric drive, Model-34790A, SN-2468. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

671
Outdoor Furnace
Wood-burning, Firebox is 2 years old, 26' of spray foam insulated hose, 5'x64"x6' tall. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

672
Woodcutting Band Saw
2"x36" band wheels, 1/2" bands, 55"x88' table top, 98" tall, 220 plug in, Condition unknown. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

673
Mattison Machine Works 276 Moulder
4'x8'x5' tall, Machine weight-9,000 lb, Electric drive,7"x4" capacity, 4 cutting heads, SN-19915. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

674
RENS P-3000 Portable Metal Detector
Comes with case and charger, Works as it should. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

676
Self Dumping Hopper
3'x4'x2' deep. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

677
3 Lumber Carts
All 3 carts are 3'x6', I solid steel, 2 have wooden surfaces. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

678
Skid Steer Snow Blade
Quick attach, 90" wide, Hydraulics for blade angle adjust, Replaceable cutting edge. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

679
Belt Conveyor
66"x17', 29" belt, Hydraulic drive, Heavy duty shop built, Adjustable legs on one end. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953. Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

680
3 Strand Log Deck
80"x12'x44" tall, No drive or chain, 45" nose skide. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

681
Milwaukee Band Saw Table
Set up for pipe clamp. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

682
Box of Milk Pails
Approximately 75 pails, 1.5 gallon, Includes side panels for more buckets. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

683
Vertical Air Tank
150 gallon, 22"x76" tall, Brand new, never used. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

684
Iron Bull Bottom Discharge Hopper
54"x64"x56" deep, In good condition. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

685
Iron Bull Bottom Discharge Hopper
54"x64"x56" deep, In good condition. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

686
Serco Knuckleboom Grapple
All new bushings and pins, New rotator, Good condition, Ready to use. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

687
Fork Extensions
50"x8'x6' tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

688
Slab Rack
45"x82"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

689
Slab Rack
45"x100"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

690
Slab Rack
45"x82"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

691
Slab Rack
45"x100"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

692
Decline Lumber Stacker
56"x80", 42"-33" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

693
Assorted Galvanized Dust Pipe
6" and 8" pipe, Assorted fittings. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953. Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

694
Natural "Puddingstone" Boulder
Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953. Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

695
North Tech Edge Sander
Model-NT-120ED-HD, SN-93120ED52, 7.5 hp, 440V, 3 ph, 9" x 138" belts, Includes 3 extra belts. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

696
Exhaust fan w/ pipe
Electric drive, 3 ph, 5 HP motor, Includes all controls & 8' of 24" galvanized steel pipe not attached. will be disassembled by the owner. Free loading. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

697
Exhaust fan w/ pipe
Electric drive, 3 ph, 5 HP motor, Includes all the controls & 8' of 24" galvanized steel pipe not attached. will be disassembled by the owner. Free loading. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

698
Yanmar Generator
17 KW, Phase convertor and electric box with starter, 3 phase, has auto start, was taken out of production 5 months ago. In good running condition. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

698C
Honeyville Complete Dust Collection System
Blower, cyclone, silo is 10' diameter, baghouse filter, includes 30" main trunk line dust pipe, 100 HP main blower, 10 HP transfer blower, 460V 3 phase. Good working condition. Buyer is responsible for removal. Metal Monkey is available for rigging. Must be removed by July 8th. Located at 6086 OH-241 Millersburg, OH 44654. Call Dan 330.749.9478

698D
Dixie Dust Collection System
Baghouse unit with air jet cleaner, 16" blower inlet, 25 HP blower, 460V 3 phase. Good working comdition. Buyer is responsible for removal. Metal Monkey is available for rigging. Must be removed by July 8th. Located at 6086 OH-241 Millersburg, OH 44654. Call Dan 330.749.9478

699
24" Dust Blower
8" inlet, 8" outlet, 20 hp electric motor, Includes extra pipe fittings, Mounted on stand w/ castors. Located at 3676 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

700
Curtis Air Compressor
80 gallon vertical tank, 7.5 hp electric motor, Model -E-57A, SN-EA7190633. Located at 3676 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

701
2-strand Transfer Deck
7'x11'6"x30" tall, No drive. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

702
Modine Cooling Unit for Natural Gas Genset
66"x90"x8' tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

703
Woodmizer 4000 Band Mill
Frame is still in Good condition, Everything else needs to be completely rebuilt/replaced, Includes panogram arm and post, SN-WM4000D12-11130444-A3.00, 80"x27'x104" tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

704
Log Trailer Bunk
10'4"x12'4"x68" tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

705
Cornell Barn Sweep Pan
No chain or drive, 45"x30'. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

706
30 HP Electric Motor
1765 rpm, 286T frame. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

707
7.5 HP Hydraulic Unit
36"x38"x52" tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

708
Lincoln Ideal-Arc R3S-325 Welder
SN-AC471275, Includes 3 full rolls of hard face wire, 480V, 3 ph. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

709
Woodchuck Bag House Dust Collector
220V, 3 ph, 38x72 bag size, In good working condition. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

710
3 Sided Hopper
8'x8'x4' deep. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

711
Air Lift Table
60"x80" surface. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

712
2 Tag Quick Attach Backhoe Buckets
(1) 16", (1) 12", QC30 coupler. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

713
2 Tag Quick Attach Backhoe Buckets
(2) 12" buckets. QC30 coupler. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

714
Belt Conveyor
32"x40', In 2 sections, No drive, 28" cleated belt. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

715
Catwalk Steps
Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

716
Dog Kennel
(4) 24"x30"x24" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

717
Dog Kennel
(4) 24"x30"x24" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

718
Dog Kennel
(4) 24"x30"x24" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

719
Dog Kennel
(6) 24"x30"x16" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

720
Hay Wagon
Fiberglass, 8'x20', 5' tall rack in back, Pin hitch. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

721
CAT C4 Power Unit
SN-NR360007, 111 hp, Good condition, Includes 12"x55"x36" hydraulic tank and 16"x55"x24" fuel tank, No hydraulic pump or clutch. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

722
Kubota D1105 Power Unit
12.5 KW @ 1800 RPM. 18 HP @ 1800 RPM. 22 HP @ 3000 RPM. Very low hours. Control panel. Runs very nice. Bellhousing H5 flywheel for 6" clutch. Needs new run solenoid. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

723
John Deere 4045T Power Unit
110 HP. Rebuilt by the Military in 2012. Ran 640 hours on air compressor. Good used Rockford clutch. Murphy controls. Very good condition. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

724
John Deere 6404TA Power Unit
Turbo & After cooled. 155 HP. 3015 Hours. WPT pilotless clutch. Murphy controls. Runs very nice. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

724A
Kubota D850 Power Unit
24 HP. Very low hours. Control panel. New WPT clutch. Runs very nice. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

724B
Kubota D600 Power Unit
20 HP. Very low hours. Control Panel. Stubshaft 1 1/4" diameter. Runs very nice. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

726
Enco Lathe and Drill
Comes with lots of tooling and operating manual. Belt drive. Good condition. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

727
Wood-Mizer Band Blades
15 Brand new plus 40+ used 1 1/2", .055, 747 silvertip blades. 14' 6". Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

728
Cooks Cat Claw Band Sharpener and Suffolk Tooth Setter
Electric drive. Good condition. Comes with a Suffolk dual tooth setter. Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

729
Information Lot for Lots 730-746
These lots were taken out of production 12 years ago. It was stored inside until 1 year ago. Lots 730-737 are offered individually then as an entirety at lot 738. All located at 93 Main St, Palatine NY 13428. They are all uninstalled and ready to load. Loadout hours are 7 AM - 4 PM. Contact Gaylord @ 574.536.1646.

730
Industies PHL Band Head Rig
Model: B-63. SN: S-106. RH. Air strain. Both band wheels are good. Was not in production for 12 years. Location: 93 Main ST E Palatine Bridge NY 13428. Contact Gaylord @ 574.536.1646.

731
HMC 4 HB Carriage and Track
Carriage is a #50 and RH. 4 HB. Silva Tech setworks. 30" x 26' capacity. 60' of track included. The carriage was completely rebuilt 1 year before shutdown. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

732
HMC Cab
In very good condition inside and out. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

733
HMC Vertical 3 Blade Edger
2 stationary and 1 moveable. All blades move up and down with hydraulic. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

734
Carriage Drive
With hydraulic unit, cooler, drum, and cable. Complete and in good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

735
150 HP Electric Motor
This came off of the headrig. Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

736
Band Blades
15 bands. 10" wide x 32'8". Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

737
Electric Soft Start
Fair condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

738
Entirety of Lots 730-737
With 10% raise. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

739
2 Strand Transfer Deck
4' wide x 10' long. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

740
Metal Detector
This one had a minor fire damage. It still works. No control box. 16" x 16' belt. Electric motor. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

741
Buffalo 70" Blower
30" diameter intake. 25" diameter outlet. With a 30" to 25" reduction pipe. Lots of 25" piping included. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

742
Chain Conveyor Wheels
3 wheels 9" x 24" diameter. Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

743
38 HP Iveco Diesel
It has a new radiator but engine needs to be rebuilt. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

744
Detroit Engine For Parts
Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

745
Valve Bank
V Pulley Sprocket pulley included. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

746
Hydraulic Unit
In fair condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

747
New 84" Driveway Grader
Skid steer quick attach, 2- hardened and replaceable cutting edges, replaceable runners, easy adjustment at both ends of each blade, heavy duty, powercoat finish. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Loadout and shipping available. Shipping is at buyers expense. Call Jonathon 574.349.4380

748
Portable Sheep Working Chute
Unit tilts for easy foot care etc. wide range of adjustment for small and large animals, good condition, 22" wide, 55" tall, 67" long. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Loadout and shipping available. Shipping is at buyers expense. Call Jonathon 574.349.4380

749
4 1/2'' Metal Bandsaw
16" x 35" x 45", has new blade, portable, good working condition. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Loadout and shipping available. Shipping is at buyers expense. Call Jonathon 574.349.4380

750
Helle Green Chain
10' x 17'. 3 strand. W-C55D roof top chain. Hydraulic drive. Good condition. Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions. 574-210-3721

751
Generac 20KW Genset
It has only 109 hours and was used as a stand by unit.  It has a 4-cylinder 3.0 liter natural gas powered engine, auto start, on board battery charger, 120/240 volt and is in good working condition. Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions.  574-210-3721

752
Winco Automatic Transfer Switch
Automatically turns on generator when low power is noticed and connects back to main power source when power is restored.   Solar power capable.  Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions  574-210-3721

753
Radiator for Power Unit
It is approximately 42'' wide x 61'' high.  It was last used on a Waukesha power unit model F1197GU before it was removed. Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions 574-210-3721

754
Non-Powered Rollcase
8' long., 16" x 3 1/2" rolls on 1" shafts. 20 1/4" roll spacing, the height adjusts from 32 1/2" to 41".
Barely used has new paint.
Contact Steve Bauder 570-460-0286
Location: 61 Kempsville Road, Kutztown, PA 19530

755
Non-Powered Rollcase
19' long, 16" x 3 1/2" diameter rolls on 1" shaft. Spaced 24", 35" high. Barely used, has new paint.
Contact: Steve Bauder 570-460-0286
Location: 61 Kempsville Road, Kutztown, PA 19530

756
Steel I-beams
Four (4) I-beams: 24" tall 7" wide 25' 3" long .395 web 1/2" flange weight is 1,400# each. Nice straight beams.
Location: 20814 Lehmans Mill Rd., Hagerstown, MD 21742
Contact: Steve Bauder 570-460-0286

757
Fuel Tank 1,000 Gallon (Leak)
1,000 gallon fuel tank that is damaged and has leak.
Location: 20814 Lehmans Mill Rd., Hagerstown, MD 21742
Contact: Steve Bauder 570-460-0286

758
Fuel Tank 1,000 Gallon
1,000 gallon fuel tank with electric fuel pump.
Location: 20814 Lehmans Mill Rd., Hagerstown, MD 21742
Contact: Steve Bauder 570-460-0286

759
Electric Motors on skid
One (1) skid of 7 total electric motors:
One (1) 5 HP; One (1) 2 HP; Two (2) 1/2 HP; One (1) 1/4 HP gear motor with 58.1 ratio; Two (2) unknown
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

760
Wisconsin Engine
4 cylinder Wisconsin engine.
Good running condition.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286
 

761
Mercedes Benz Diesel Engine
4 cylinder Mercedes Benz Diesel Engine.  Currently not running.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

762
Jointer
8" Jointer.  No drive.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

763
Truck Tool Box
Delta truck tool box.  20" wide, 60 1/2" long, 11" deep
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

764
Conveyor
Conveyor 12" x 18' with gearbox.  No drive.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

765
Tailing Belt
Tailing Belt. 18' long off Frick edger.  Has 4 1/2" and 13" belts. 42 1/2"inside mounting bracket.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

766
Electric Motor
20 HP 3 Phase Electric Motor
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

767
Oil Gear Hydraulic Motors
Two (2) Oil Gear Hydraulic Motors: PVWH20RSAY CN-NN
2.83 CID; 2500 PSI; 3000 Max; 2400 Max RPM.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286
 

768
Metaris Hydraulic Motor
Metaris Hydraulic Motor.  Brand new.
3.94 CID
#MHM31A842JEAL20-30
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

769
Loader Bucket
Loader Bucket 8', unknown make and model. Has been welded and modified.
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286
 

770
Steel I-Beams
(4) Galvanized I-Beams
12" web, 4" wide, 1/4" thick, Lengths are: 15' 3", 15' 8", 16" 9", 17' 7".Base plate: 16 1/2" x 7"
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

 

771
Log Deck
Forest-All Log Deck, 2 Strand, 15' x 5 1/2' 3HP with Drive
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

 

772
HMC Shavings Mill
HMC Shavings Mill - 2009, 20 HP Hydraulic Drive, Double Head with 00HP motors.
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

773
Dust Blower
Sawdust Blower, unknown make and model, not tested.
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

774
I-R Air Compressor
Air Compressor.  5 HP 3 Phase.  Motor Model # M3218T
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

775
Miller Welder SRH - 303
Primary 230/460, 60/30 Amps, 14.4 KV, 24 KVA, 3 Phase.

Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286
 

776
Steam Cleaner
Hotsy Model-S5735-3, 3000 PSI, 225 degrees, 460 VAC, 3 Phase
3,361 hours.  Natural gas powered for heat, can be converted to propane.
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

777
Drill Press
Powermatic Model 1150.
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

778
Vacuum Pump
SOGEVAC Model SV-40, 2HP, 208V
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

779
Plasma Cutter
Thermal Dynamics PAK Master 150XL
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

780
Metal Band Saw
J. A. Fay & Egan Band Saw
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

781
Trailer Chassi
Only yard ready. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

782
Spiral Rollcase
24" x 12' long. New paint. No drive. Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

783
Powermatic Shaper
Model # 26, serial # 8126556, 3/4" spindle, single phase, 2 HP, 115V/230V, excellent condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

784
Wood-Mizer Sharpener
Very good condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

785
Larick Profile Sander
Model 360AIR, serial # 22022, 7 different sanding heads, no motor, very good condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

788

786
New Wright Self Dumping Hopper
1 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

789

787
New Wright Self Dumping Hopper
2 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

790
Dewalt Chop Saw
Electric. In working condition. 8' infeed and 8' outfeed rolls. Located: E10168 Yttri Rd, Readstown WI 54652. Call Gaylord at 574.5363.1646 for any questions. Removal 14 days.

799
Information lot for items 800-820.
Located at 9805 Hwy 24E. Centreville, MS 39631.  Rigger Option Available: Mike Sartin  225-931-4899.  If using another rigger or rigging yourself, must provide Certificate of Insurance for $1 million in liability insurance.  Submit copy to ak@brightstarauctions.com.  

800
4 Strand Log Deck*
Hurdle 21'x17'wide, 4th strand added on H-78 chain, Tulsa Winch Drive Hydraulic, 4 arm stop and loader. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

801
Hurdle Magnum LT Sawmill*
to include 3 head block carriage, 17' carriage, carriage extended 2 ft, 13' dog centers, 40" openings, (3) 2 1/2 1045 axles, 12" wheel,48" track center, variable tapering, complete wiring package, features of the Magnum LT Carriage include 5x5x1/2 tubing frame vs. 4x6x3/8, 1/2x 8 angle bases vs. 1/2x6, 3/4x4" base wear plates vs. 3/4x3. Simple Tong Dog design, infinite variable tapering vs. 2 position dogs open 29" vs. 22 (no need for hammer dog) 40" openings vs. 36" , #100 headblock chain vs. #80 chain. 1 1/2" chain idler pin vs. 1 1/4" pin, Mac Air valves, cant turners, Nano setworks, 57.5 ft. track Cable Drum w/45T Cab Husk, no saw mandral, setworks in cab, hyd. Feedworks, off bearer belt. No main motor drive. Set carriage was replaced new in 2017. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699, Removal 30 days.

802
Live Rollcase*
22' with (9) 10'x30" rolls. Support to floor only. 5 hp gear motor drive. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699, Removal 30 days.

803
Rollcase*
35' (17) 6"x32" rolls includes 12' lift section for slab all out, support to floor. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699. Removal 30 days.

804
3 Strand Lumber Deck*
20'x8'4" wide, air bag pop up, S drive constructions, 81X chain, heavy duty, gear motor drive, support to the floor. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

805
Miner 3 Saw Edger*
2 movable 30"x 4", 14" blower, 25 hp motor, no motor controls, hydraulic set works. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

806
Transfer deck to edger*
8'x16' wide. H78 chain, gear motor drive, no support steel. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

807
5 Strand Transfer Deck*
8'x17'6" wide in floor transfer deck 5 strands, (4) H-78 roof top chain, (1) H-78 gear reductions drive, no support steel. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

808
Double End Trimmer*
20', 2 saw will cut up to 9" cant, Individually driven saws, 22' block removal conveyor. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

809
Belt Waste Conveyor*
13'x22" with gear reduction drive, no support steel. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

809A
Green Chain*
40'x8'x6" with S drive constructions, 81X chain, no drive.  Located at 9805 Hwy 24E, Centreville, MS 39631.  Rigger: Mike Sartin 225-931-4899 Contact Zach for information  931-224-0699  Removal 30 days

810
Barnsweep type conveyor*
55' with 42" pan and drive, no support steel is located under mill. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699. Removal 30 days.

811
Belt Conveyor*
15'x8" with gear reduction drive, under mill. No drive. Located at 9805 Hwy 24E, Centreville, MS 39631.Rigger: Mike Sartin 225-931-4899 Contact Zach for more information. 931-224-0699. Removal 30 days.

812
Tank Mount Air compressor*
Curtis 10 hp, no motor controls. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

813
Green Chain Deck*
30'x10' wide 4 strand with 81X chain, no drive. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

814
Shaker Screen*
Precision 6x6' (sn: S1899) (out) Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

815
Cyclone*
5' Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

817
Cant Cut-Off Saw*
Hydraulic operator, 15 hp motor and hydraulic 20 hp motor on saw, 32" carbide tip saw, 42" hydraulic cylinder. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699 Removal 30 days.

816
Chip Blower
Phelps F38KW with 25 hp with dust load out chute and pipe. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699 Rigger: Mike Sartin 225-931-4899 Removal 30 days.

818
Concave Belt Conveyor frame and roller*
165'x20", no belt, no drive, 110' on yard, 55' still installed. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699 Rigger: Mike Sartin 225-931-4899 Removal 30 days.

819
Rollcases*
15' with (5) 30"x6" rolls, 23' rollcase with (9) 24"x6" rolls, 17' rollcase with (7) 24"x6" rolls, 14' rollcase with (4) 19"x6" rolls, 22' rollcase with 40"x10" rolls, all are out on yard, NO DRIVES. 5 rollcases total. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699. Rigger: Mike Sartin 225-931-4899 Removal 30 days.

820
Belt Conveyor*
22'x 10" conveyor with gear reduction drive, 16'x14" belt conveyor, no drive, Both are out on yard. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699 Removal 30 days.

850
International DT 466 diesel engine

821
Morbark 640 Debarker*
75 hp motor with cab and controls. Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

822
Soft Start starter and disconnect
for the Debarker Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

823
(2) Log Decks
Morbark 22' 2 strand log deck, hydraulic drive, 9' support steel, 8' wide.Located at 1052 Reason Rd. Williamson, NC. . 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

824
Log Trough
Morbark 40' Endwise log trough, 19" track type chain, hydraulic drive.Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

825
Log Trough
Morbark 40' Endwise log trough, 19" track type chain, hydraulic drive, (2) 3 arm kickers. Both kick in same direction.Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

826
Bark conveyor
Morbark 30' drag chain type, 12" wide, hydraulic drive. Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

827
Waste Conveyor
Morbark 36" wide, 14' long, mounts under Debarker hydraulic drive.Located at 1052 Reason Rd. Williamson, NC.  30 days removal. Contact Zach Kittrell for more information. 931-224-0699

828
Tie Back of Lots 821-827
With 10% raise. Located at 1052 Reason Rd. Williamson, NC.  30 days removal. Contact Zach Kittrell for more information. 931-224-0699

829
Cambio Ring Debarker
30", 75 hp motor, individual hydraulic motors on heads, Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699. 1st lot of an entirety

830
Infeed trough
13' floating infeed trough for Debarker, hydraulic drive. Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

831
Cab
7'x7' Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

832
Cambio Debarker Frame
85' steel frame under Cambio Debarker. (3) 21" I Beams.  with axles and tires.   Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699.

833
lots 829-832 tied together with 10% raise
lots 829 thru 832 tied together with 10% raise*

841
Fastline Band Resaw
mounted on trailer deck 102" wide made to handle 12' material. Has return belts, 21' over all length. Resaw located at 155 Smith Mill Road, Smithville, AR 72466 Contact Zach Kittrell for more information.  931-224-0699 30 days removal. 

842
Up Cut saw
with 6'x12" gravity roll case. No motor, Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

843
Belt conveyor
33'x12" with Gear motor drive.Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

844
slant slide
20' steel. Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

845
Grapple Bucket
66" Universal quick attach for skid steer. Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

846
(4) Rolls
1 partial roll 1" x .05 AAR Black plastic banding, 1800SW. Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

847
Waukesha Natural Gas Power Unit
w-clutch, runs as it should, slight leak in manifold gasket. Was running untill last year. Still a nice unit.
Located at: 11606 Brickyard RD Holton MI Contact Eugene 260.350.8953

848
Waukesha Natural Gas Genset
meter reads 249 hrs. 150 KW (continuous) Kohler generator. Just fired up this week and runs very good. Generator tested AOK! Nice unit! Located at: 11606 Brickyard RD Holton MI Contact Eugene 260.350.8953

849
John Deere Power Unit
Model # 6359 TL, w-clutch, meter reads 2153 hrs. 6 cylinder, starts and runs good. Located at: 5179 Larson W RD West Farmington OH Contact Eugene 260.350.8953

850
471 Detroit Diesel with Clutch
The engine starts and runs very well. it has just been serviced and tested. The clutch engages and works. 
Location: 362 County Hwy 30 Jordanville, NY 13361
Call Steve: 570.460.0286

851
CNG Burn Table
10' x 30' with tracer eye, 400 stored shapes, burny five control system, plasma or oxiacceteline powered, good condition. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

852
Double Head Notcher
Brand new shop built, with indexable teeth, plunger feed, rated at 55 stringers per minute, line shaft ready. Includes dust blower. Located at: UPDATED! 726 Audrain RD 152 Clark MO 65243 Contact Eugene 260.350.8953

853
JD 4000 Cable Winch
4000 series, off of a JD Skidder, in good condition. located at: 407 Clark Store Sinking Fork RD Cerulean KY Contact Eugene 260.350.8953 

854
Transfer Deck
7' x 16', hydraulic drive, includes structural steel to ground. 
Location: 682 Latimer Hill Road, Canajoharie, NY 13317
Call Steve: 570.460.0286

950
Rough Cut Maple Slabs
26"x88", 2-3" thick, 10 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

951
Rough Cut Walnut Slabs
26-34"x94-96", 2-2 1/2" thick, 9 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

952
Rough Cut White Oak Slabs
30-42"x11'6", 1 3/4"-2 1/2" thick, 7 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

953
Rough Cut White Oak Slabs
50-55"x11'6", 2-2 1/2" thick, 4 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

954
Rough Cut White Pine Beams
6"x10"x12'3"-12'6" long, 42 total, Cut 2/22. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

955
Rough Cut Walnut Slabs
15-34"x48-52", 2-2 1/2" thick, 8 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

956
Rough Cut Spalted Maple Slabs
36-54"x112", 2-2 1/2" thick, 10 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

957
Rough Cut Spalted Maple Slabs
36-55"x9'8"-10', 2-3" thick, 6 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

958
Cherry Slabs
31"-38"x11', Kiln Dried, 2" thick, 2 pieces, 64 board feet each. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

959
Walnut Slabs
Kiln Dried 22"x10', 4 total, 2" thick. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

960
Walnut Slabs
Kiln Dried 2-(212"x7', 2 1/2" thick) 2-(13-21"x9', 1 1/2" thick) 4 pieces total. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

961
Walnut Slabs
Kiln Dried, 19-24"x8'x9'6", 2" thick, 6 total. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

962
Walnut Lumber
Kiln Dried, 81 board feet, 7/8" thick, 9' long, 4-6" wide. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

963
15/16" Hickory Lumber
934 Board feet, 4-7" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

964
4/4" Red Oak Lumber
622 Board feet, 4 1/2"-8 1/2" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

965
15/16" Hickory Lumber
329 Board feet, 4-9" wide, 12' Long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

966
5/8" Mixed Species Lumber
919 Board feet, 6-9" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

967
15/16" Red Oak Lumber
459 Board feet, 6-10" wide, 10' Long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

968
15/16" Red Oak Lumber
423 Board feet, 6-10" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

969
15/16" Red Oak Lumber
364 Board feet, 7-13" wide, 5-8' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

970
15/16" Hard Maple Lumber
658 Board feet, 8' Long, 6-11" wide. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

971
15/16" Hard Maple Lumber
504 Board feet, 10'6" long, 4-12" wide. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

972
13/16" Poplar Lumber
155 Board feet, 10'6" long, 6-9" wide. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

973
15/16" Red Oak Lumber
294 Board feet, 4-12" wide, 12'6" long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

974
15/16" Hard Maple Lumber
125 Board feet, 3-9" wide, 6'6" long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

975
15/16" Hickory Lumber
181 Board feet, 4-8" wide, 6' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

976
15/16" Red Oak Lumber
374 Board feet, 5-10" wide, 8' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

977
15/16" Hard Maple Lumber
1104 Board feet, 4-10" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

978
15/16" Hard Maple Lumber
922 Board feet, 5-9" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

979
15/16" Red Oak Lumber
264 Board feet, 3 1/2"-9" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

980
15/16" Hard Maple Lumber
660 Board feet, 4-12" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

981
15/16" Red Oak Lumber
292 Board feet, 6-9" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

982
4/4" Red Oak Lumber
469 Board feet, 5 1/2"-10 1/2" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

983
15/16" Hickory Lumber
481 Board feet, 5-11 1/2" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

10000

984
8/4" Hard Maple Lumber
411 Board feet, 6-16" wide, 8-10'6" long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

985
15/16" Red Oak Lumber
501 Board feet, 4-12" wide, 8-10'6'' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

986
15/16" Hard Maple Lumber
339 Board feet, 5-12" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

987
15/16" Hard Maple Lumber
963 Board feet, 5-10" wide, 8-10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

988
1 7/16" Hard Maple Lumber
313 Board feet, 6-14" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

989
15/16" Hard Maple Lumber
965 Board feet, 4-14" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
June 2022 Bright Star Virtual Consignment Auction
 Live Auction
 
Auction Date(s)
Saturday Jun 18, 2022 Completed
Auction Location

Various Locations, IN 46540
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. ($2,500 limit applies to credit card payments.). All items are pick-up only. All items must be removed within 14 days unless otherwise noted. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. Any rigging or loading fees are at buyers expense.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Monthly virtual consignment auction. Online/phone bidding only. Consignments wanted including but not limited to: sawmill, pallet shop,industrial woodworking, metalworking, skidders, loaders, dozers, lifts, forklifts, skid steers, tractors, etc. This equipment is located at various locations, please note address and phone numbers in every description. Buyers have 14 days to remove equipment unless noted otherwise in description. 

00
Information Lot
June Virtual consignment auction. Please note locations and agent contact info  in each lot. Buyers have 14 days to remove equipment unless noted otherwise in description. Rigging is generally available on installed equipment. Rigging is an additional expense to buyer unless noted otherwise.

300
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box. Shipping available for $30

301
Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more. Shipping available for $20

302
1/25 Scale Wood-Mizer LT-40 Super Hydraulic Sawmill
Still in original box. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Shipping is available at buyers expense. Call Jonathon 574.349.4380

399
Miner Edger
4''X32'' capacity, 2 blades, 1 movable (could both be movable) 3 spare blades (2 like new) belt tensioner is broke but otherwise in good condition. Located at: 8031 E Gallagher Lane Sumner IL Contact Eugene 260.350.8953

400
Twin Stenner Scragg Mill
It has 41 1/2'' band wheels, 5'' wide blade that is approximately 23' long, 30Kw 3-phase electric motors, weight strain, appears to be complete and is in unknown working condition. Item is located at 150 Seybert Ave White Pigeon Michigan 49099 Load out within 30 days. Call Bronson with questions 574-210-3721

401
Sanborn Mini Max Sawmill
It has a 4 head block carriage (1 head is not currently mounted), includes a 60 hp 460V 3-phase Westinghouse electric motor, 36'' band wheels the 1 1/8'' thickness, 5 1/2'' blade that is approximately 21' long, includes mud saw, includes hydraulic controls but no hydraulic unit. Item is located at 150 Seybert Ave White Pigeon Michigan 49099 Load out within 30 days. Call Bronson with questions 574-210-3721

402
Gear Box 34:1 Ratio
It has 54 tooth double sprockets and a coupling mount for a motor.  Item is located at 150 Seybert Ave White Pigeon Michigan 49099 Load out within 30 days. Call Bronson with questions 574-210-3721

402A
West Plains 3-Head Re-Saw
Model-WPRS-JRBS, SN- 732, Made in 1996, 6" chain conveyor feed with hydraulic drive, 5 hp hydraulic pack, 36" band wheels, 1 1/2" bands, 20 hp electric motors on heads, Very good condition, Production ready. Located at 11751 Co Rd 12, Middlebury, IN 46540. Call Eugene with any questions at 260-350-8953. 

403
Smith 2 Head Resaw w/ Return
1 1/4" band. Line shaft ready, ready for production. Located at 3455 Nickless Rd. Gladwin, MI 48624. Call Jonathon 574.349.4380

404
End-Around
Hydraulic drive. Located at 3455 Nickless Rd. Gladwin, MI 48624. Call Jonathon 574.349.4380

405
Detroit Series 60 Diesel Engine
330 HP, SN 06R0237772, new unit in 2016, meter reads 12,550 hrs. first lot of an entirety. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

406
Hydraulic Unit
2 pumps, jack shaft, made by Georgetown Hydraulics, mounted on 6' x 20' I Beam frame, Vickers hydraulic motor Eaton motor 104-1025-006 used on vibrating conveyor, Permico Hydraulic motor M257A731RRZA-15 used on blower. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

407
Quincy Air Compressor
Rebuilt in 8-27-19. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

408
Belt Driven Generator
15KW, Stamford. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

409
Entirety with 10% Raise 405-408
Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

409B
Timberking Talon 900 Portable Edger
Kohler command 25 engine, 2 blade, 1 moveable, 21'' x 56'' out feed belt, 21'' x 56'' infeed belt. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

410
CSI Buck Saw with Log Rack
MN DL-4400,SN4405071179, 7' x 16' saw rack, 5' saw blade, hydraulic drive. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380 

411
4 Strand Transfer
Hydraulic drive, 9' x 7'. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

412
Live Rollcase with 4 Arm Popup Transfer
with control box, 3' x 20', no drive, 6 1/2'' x 30'' rolls. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

413
Rollcase
12V over air controls, spiral rolls, no drive, 30'' x 17'6'', 6 1/2'' x 24'' rolls. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

414
Slab dump
110V over air controls, air lift cylinder, 36'' x 10'. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

415
Bumper Stops and Cable Pulleys
16'' cable pulley, frame 57'' outsider. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

416
Oil Cooler Fan
30'' x22'' radiator, hydraulic motor. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

417
Detroit Diesel Engine Series 50
Approx. 14000 total hours, newer radiator and control panel, Clutch and pulley, 6V belts C-244, 6V belts C-132. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

418
Deutz Diesel Engine
Type BF6L914C, fits on 419 platform, meter reads 8,888 hrs. First lot of an entirety.  Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

419
Hydraulic Pack with 3 Pumps on Platform
110 gallon pump, Hub City pump drive, pressure comp 40 gallon, 45 VQ pump runs 45M Vickers motor, filters and valves, 48'' x 48'' x 32'' tank, new inserts for pumps, jackshaft.Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

420
Lot # 418-419 with 10% Raise
Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

421
Oil Cooler
34'' x 32''x 10'' oil cooler, 3 HP electric.Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

422
Shafts with Pulley and Bearing
2 15/16'' x 80''shaft, 2 15/16'' x 48'' shaft, 8 groove pulley 13 1/2'', 4 groove pulley 13 1/2''. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

423
Hydraulic Pack
4 pumps, 2- 24 gallon Permco, 2- 20 gallon Vickers, mounted on frame with jackshaft, 51'' x 88'' frame, 48'' x 24'' x 30'' tank. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

424
Cleereman Carriage 3HB
model 36, SN36-214, panograph, oil tank for track oiler, 110V over air setworks, bottom dog turners, first lot of an entirety. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

424A
Air Cylinders for Cleereman Carriage
 Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

425
Carriage Drive Feed
Pump setup for line shaft, directional valve. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

426
Carriage Drive Hydraulic Cable Drum
5/8'' Cable. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

427
Silvatech Setworks NOT PART OF THE ENTIRETY
Was used on model 38. Complete works. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

429
Entirety with 10% Raise 424-428
Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

428
Parts for Cleereman Carriage
 Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

430
Reckart Edger (First Lot of Entirety)
MN 42E,SN 87012, 3 Stationary 2 moving blades, 20''blades, hydraulic cylinder on blade set, 3 feed rolls have been rebuilt, hydraulic drive, 6'' x 42'' capacity. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

675
Delta Radial Arm Saw
32"x48" table top, 64" tall, 18" blade, SN-89F31337, Needs new contactor. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

431
In Feed Rolls
4' x 10', side press roll with air cylinder, hydraulic controls. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

432
2 Belt Tailing System
19'' x 17' with 15 1/2'' belt, 6 1/2'' x 17' with 5'' belt, frame with press down rolls. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

433
Entirety - Lots 430-432 with 10% Raise
 Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

434
New Feed Roll for Edger
6'' x 44'' with 1 3/4'' shaft 60'' long. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

435
Edger Blades
12 pcs.22'', 8pcs.20''. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

436
Edger Spacers and Parts
Hydraulic motor, housing cracked. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

437
Clutch
Size 14T, needs repair. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

438
Hydraulic Pump and Motor
Pumps for 50 HP, carriage drive. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

439
Carriage Track
6 pc.14' plus 4 shorter ones. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

440
Frick Double End Trimsaw
20', SN 1064, 20'' saw blade, 2 moving saws. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

441
Cleereman Carriage 36''
Air setworks, needs rebuilt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

442
Hydraulic Pack
2 15/16'' x 80''shaft, mounted on skid, 37'' x 14'' x 23'' tank. Was used with the Deutz unit lot 418. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

443
Cyclone Stainless Steel
24'' x26'' x 61'' metal stand, 32'' x 6'. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

444
Belt Conveyor
12'' sides, hydraulic drive, 52'' x 18' x 48'' belt, cleated belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

445
Belt Conveyor
Hydraulic drive, 52'' x 15', 48'' belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

446
Belt Conveyor
Hydraulic drive, 42'' x 15', 30'' belt, cleated belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

447
Belt Conveyor
Hydraulic drive, 54'' x 34', 6 sides, 47'' belt. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574.349.4380

448
Rollcase with Board Kicker
No drive, hydraulic cylinder on kickers with 110 controls, 36'' x 24', 6 1/2'' x 30'' rolls. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

449
Pettibone Telehandler B-68
Parts machine. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

450
Hydraulic Cylinder 3 Stage
5 1/2'' x 55'', 3 stage cylinder for Pettibone. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

451
3 Clutches
Model 214. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

452
Cleereman Controls
Was used with lot # 441. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

453
Hydraulic Motor
Skid of motors and parts (assorted). Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

454
Oil Cooler Radiator
Shop built with hydraulic motor, radiator with small leak. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

454A
2 Head Wood-Mizer Horizontal Resaw
Hydraulic blade tension, hydraulic motors on end, press down rolls, hydraulic driven, 1 1/4'' bands, 7/8'' x 34'' band wheels, SN MH2D9406177, 6'' x 11' feed thru web belt. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454B
Morgan Single Head Resaw
1'' x 24'' wheel, 1 1/4'' band, hydraulic drive, 6'' x 14' feed belt, 8'' x 7' cant return belt, air tire press down rolls, gear box on belt feed needs new seals. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454C
Stutsman Cant Sizer
4'' x 6'' capacity, hydraulic drive feed rolls, 6'' x 6' 6'' side pressure belt, 6'' x 38'' infeed/outfeed belt, hydraulic driven. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454D
Morgan Board Deduster
hydraulic drive, 6'' x 5' infeed/outfeed belt hydraulic driven, press down roll needs new tire, SN 100603171. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

454E
Transfer Belt
24'' x 10' hydraulic drive. Located at 52924 ST RT 651 Fresno, OH 43824. Call Eugene 260-350-8953.

455
Trash Hopper
36 1/2'' x 31'',self dumping, caster wheels. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

456
Trash Hopper
36 1/2'' x 31'',self dumping, caster wheels. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

457
Trash Hopper
36 1/2'' x 28, self dumping. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

458
Logisol 4-Sided Molder
Model # PH260 Hydraulic drive, electric feed, tongue and groove,knives,12''x 4'' outfeed, and "new" 5' infeed, top and bottom planers have no knives, hydraulic pumps for planer, jack shafts and mount, electric control box, motor starter. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

459
Hydraulic Tank
40'' x 16'' x 28''. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

459A
Fuel Tank
38'' x 60'',on stand, stand needs welded. Located at 52924 ST RT 651 Baltic, OH 43824. Call Eugene 260-350-8953.

459Z
Information Lot
Selling the excess equipment for Squier Pallet in Waterloo IN. Not to interfere with the successful ongoing operation of Squier Pallet. Be sure to check out these quality well maintained items most of them being one owner.
Loadout is available. Please have all uninstalled equipment & rolling stock removed within 2 weeks. 45 days for removal of installed equipment.
 Experienced Rigger Paul Avery 270.543.1919 is fully insured and committed to this job. Rigging is at the buyers expense. 

460
2006 Mellott Rosserhead Debarker
MN MR48, SN 0670C202, Pantograph arm, 54' x 6' x 88''high operator cab, airhead lift cylinder, 2-10,000 series hydraulic motors on wheels, all controls in cab, (Pilot controls) 75 HP electric on head, 3'' x 24'' bull wheels, 1 owner machine, 50 HP electric on hydraulic pack, hydraulic motor on chain feed, joystick controls, heat and AC, Item # 70C-2, support to ground, 14' 6'' outside to outside bull wheels, Date 5-06. VERY GOOD CONDITION! Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

461
Barn Sweep Barn Conveyor
18'' paddles, 46'' x 26' flat, 20' on incline, electric drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953. 

462
Mellot 5-Strand Log Deck
Support steel to ground, runs off debarker ( hydraulic), stop and load, hydraulic cylinder on stop and load, 10' x 28', Tulsa gear with hydraulic motor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

463
Cleereman Carriage 3HB
2006 Model #  420, SN 420-893-06, hydraulic setworks drive, air dogs, 16' long, controls in cab, set shaft proportional carriage, Paw Taw John setworks, 1 owner machine, 4 axles, pantograph and support post. This mill only ran an average of 2.5 days a week.A WELL MAINTAINED VERY NICE MILL!  1st lot of an entirety.  Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

464
Cleereman Track and Frame
Bumpers on ends, 58'' C-C x 50', support to ground. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

465
Tyrone Berry Feed and Drive
Feed was new in 2016, MN SMA220, SN 12780, control valve in cab, 60 HP electric, remote oil cooler, 5/8'' cable, 20'' Idler wheel. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

466
Cleereman 56'' Husk Frame with Top Saw
56'' saw, 4' x 8' frame, 32'' top saw, 24'' x 5' off bear belt. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

467
Lincoln Electric Motor
150 HP, frame 444T, 1,780 RPM, 480 V. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

468
Electric Hydraulic Pack
10 HP, 36'' x 14'' x 24'' tank, used on setworks, electric oil heater. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

469
Cleereman Operators Cab
Steps and Catwalk support to ground, heat and AC, 54'' x 96'' x80'' high. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

469A
Cleereman Entirety 463-469
With 10% raise. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

470
Cedar Creek 4 Blade Vertical Edger
No controls, splined shaft, 24'' saws, F7 style, 75 HP electric motor, 8'' x 40'' capacity. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

471
Mellott Log Turner
control valve in cab, hydraulic drive, 48'' chain drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

472
Mellot 5-Strand Log Deck
stop and load hydraulic cylinder, support to ground, Tulsa winch gear box with hydraulic drive, 10' x 22' (from debarker log stop), 52'' nose skids. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

473
Hydraulic Pump
Was run off mandrel, use for turner, 18'' x 20'' x 15'' tank. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

474
Transfer Belt
Built on Mellott rollcase frame, 31'' x 12' spiral rollcase built on end, support to ground, 36'' x 25' x 8'' sides, 22'' pan, 22'' belt. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

474A
Barn Sweep Bark Conveyor
Under debarker, electric drive, 44'' x 30' to incline, 30' incline, 60' total. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

475
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

476
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

477
56'' Saw Blade
BF style, has broken shoulder. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

478
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

479
56'' Saw Blade
BF style, marked spare only. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

480
56'' Saw Blade
BF style. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

481
Parts for Vertical Edger
New splined shaft, control valves, rubber coupling, Edger probes, brass pins, bearings, laser lights. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

482
Parts for Cleereman Carriage
Mac valves, turner teeth, brake pads, sprockets, arbor saw plates and collars. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

483
Cylinders for Edger Carriage
2 pc.- hydraulic 30'' stroke, 2pc. Hydraulic 24'' stroke, 1 pc. Air 18'' stroke. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

484
Skid of Parts & Jockey Grinders
2-jockey grinders (1 is new), blades for grinders for carbide teeth, saw wrenches, hydraulic motor, new Danfo's OMS 315. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

485
Bungee Rope for Debarker
1'', debarker carriage valve, belts, joystick handles for debarker controls, Carbide teeth for debarker. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

486
Debarker Parts
Head bearing, carriage wheels, cylinders for head, cylinders for stop and load. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

487
5/8'' Cable for Carriage Drive
2 pc-5/8'' x 100', 1 pc. 5/8'' x 65'. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

488
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

489
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

490
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

491
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

492
Simonds Carbide Saw Bits
BF 7 5/16'' dominator. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

493
Mellott Log Turner
48'' chain type, hydraulic drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

494
Brett Single Head Knotcher
Hydraulic feed, SN 7811, MN NA100. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

495
Pendu Cant Sizer
Horizontal head. Carbide index bit spiral head, 12'' wide x 10'' high capacity, 30 HP electric motor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

496
Baker Twin Head Band Resaw
MN BBR-O, SN 96-1714, 13/16'' x 28'' wheels, 6'' x 17' feed thru belt, 6'' x 25' cant return belt, 20 HP electric on heads, electric drive on feed, 1 1/4'' band, air cylinder side press wheels, Pendu 16'' blower, 10 HP electric. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

497
Baker Side Transfer Belt
Hydraulic drive, 5 1/2'' x 40'' side shift belt, 24'' x 5', 21'' belt. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

498
Viking Turbo 505 Automatic Pallet Nailer and Stacker
New in 2006, This is the 505 long model, with a max capacity of 60''X72'' (72'' stringers) and min. of 28''X28'' Fully automated, pallet flipper, hopper feed for nails, set up for 3 runners but has parts for 4,  fully automatic stacker, 6' x 12' stack take out skate rolls, very good condition, 1 owner machine. Very nice unit! Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

500A
Marksman Matrix Laser Printer
Foxjet Pro-series 384, SN FXJT82501573,MN MKMATRIX, input 240, paints 2 sides of pallet. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

501
Spare Parts for Printer
Repaired printer head, Marksman duo fox jet, 2 bottles ink. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

502
Viking Gear Box for Turner
 Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

503
Leeson Electric Motor
10 HP, 3,520 RPM, frame 215T2, for Viking hydraulic pack. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

504
Electric Motor
For pallet turner on Viking nailer. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

505
Viking Stacker Gear Box
 Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

506
Viking Right Angle Electric Motor and Gear Box
0.5 HP, for conveyor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

507
Pallet of Viking Parts
Limit switches, control cable, air cylinder. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

9022
Pitts Log Trailer
44' long Tri-axle trailer with 11 Bunks spaced 6'6'" apart (see photos)
Tires and brakes are in good condition, current inspection valid.

508
Pallet of Viking Parts
Electric switches, seals, roller chain connecting links, control cable, photo eye sensors. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

9023
Flatbed Trailer
53' by 102" trailer

509
Pallet of Viking Parts
sprockets, electric switches, photo eye sensors, air cylinder. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

9024
Western Star Tractor
2000 Western Star 4964F Conventional with Sleeper, Cat 3406 425HP, 10 speed Eaton Transmission.

9031
Grapple Forks
60" Grapple Rake, New condition only used twice.

510
Pallet of Hose for Viking
Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

511
Pallet of Viking Parts
 Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

512
Pallet of Viking Parts
electric switches, air cylinders, photo eye sensors, hydraulic motors, control cable. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

513
Pallet of Viking Parts
Sprockets, chains, gear box, Parker valve, control cables. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

514
Pallet of Viking Parts
Electric switches, photo eye sensors, cylinders, gear box. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

515
Pallet of Viking Parts
Sprockets, gear boxes, cylinders, photo eye sensors, Parker valve, hydraulic motor. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

516
NEW Portable Dust Blower
Has clear plexiglass cyclone, dust collection barrel, return air filter, 12" blower, 5 HP direct drive, 230 V, 6" inlet. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953  

517
Belt Conveyor
12" x 25' electric drive. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

519
AMW Horizontal Resaw
Wood-Mizer, meter reads 514 hrs., Kohler command, MN HR120G15,SN 12091031,15'' feed, 12'' belt, 74'' long,12V motor on feed belt, 18 3/4'' band wheel fits 1/2'' band, 28'' x 7 1/2'' press down bar, no battery, Ro. 15 motor. Located at 12973 Sawmill Rd. Allensville, PA 17002. Call Jonathon 574.349.4380

520
DISA 36" Dust Blower
Model-040-315-CCW-S, 15 hp electric motor, 16" inlet and 16" outlet. Located at 52240 CR 35 Bristol, IN 46540. Call Eugene with any questions at 260-350-8953.

521
Cyclone
32"x6' tall, Includes stand. Located at 52240 CR 35 Bristol, IN 46540. Call Eugene with any questions at 260-350-8953.

522
Woodpecker Downy Pallet Nailer
Model-Downy-60x70-071211-1L, Includes Hawkeye stacker, 110 firing system, Everything else is fully air powered, In good running condition, Everything works as it should, Machine was partially updated in 2018. ONLY NAILED 138,000 pallets in its entire lifetime!! Does not include nailers. Located at 52240 CR 35 Bristol, IN 46540. Call Eugene with any questions at 260-350-8953.

550
1938 Allis-Chalmers Model B Tractor
It has a 17 horse power 4-cylinder gas engine a 3-speed transmission with reverse. It comes with a PTO, rear belt pulley and is crank start only.  It is in good running condition.  Serial Number: B2912 Location: 4387 SR 331, Bremen, IN 46506. Call Bronson with questions 574-210-3721 

551
New Holland LS180B Skid Steer
Meter reads 1200 hours, enclosed cab but door is missing, Forks in photos are not included. sells with a bucket only, good working condition. Located at: 5916 Windsor RD Union Grove NC 28689 Contact Eugene 260.350.8953

579
2016 Case 588H Forklift
4 wheel drive, side shift, 3 stage, meter reads 433 hrs., heater, fan,  AC, Jensen radio, air ride seat, Case engine, 60 1/2'' wide, 48'' long forks, 9' 5'' mast, like new, one owner machine! PIN JJGN580HAFC728193, new in 2016. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

579A
Linde H30D Forklift
Meter reads 6450 hours, Volkswagen diesel engine, sideshift, tilts forward to 60 degrees, solid belting wheels but solid rubber wheels are included, runs and operates great but does not drive due to safety code T-326, get rid of the code and you will have a great machine. RESERVED TILL JULY 1st FOR LOADOUT.
Location: 5579 St Rt 414. Romulus, NY 14541.
Call Steve 570.460.0286

580
Toyota Forklift
Model-52-6FGCU30, SN-60834, 5,000 lb weight capacity, Meter reads 11,578 hours, engine was rebuilt approx. 2000 hrs. ago. solid tires, Has side shift, 5"x48" forks, 39"x87" tall three stage mast, works great. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478. RESERVED UNTIL JULY 1ST FOR LOADOUT

581
Toyota Forklift
FREE DELIVERY WITHIN 500 MILE RADIUS! Meter reads 24,140 hours as of 6-17-22,   Model-02-6FDU35, SN-60439, 7,000 lb capacity, Machine weight-13,686 lb, Has side shift, 3-stage mast, Pneumatic tires, Toyota diesel engine, Very good running machine, Everything works as it should. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

582
Pettibone Model B-68
MN B68-C,SN 7-509, quick attach system, runs and operates, good foam filled tires. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

583
Quick Attach Block Forks for Pettibone
4 prongs 48'' long. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

IM31550

584
Cat Forklift
5000 lb lift capacity, 3 stage, propane, meter reads  999 hrs. solid cushion tires, good working condition. Located at: W 14958 Babit Ave Gilman WI Contact Eugene 260.350.8953

585
Daewoo G35S Foklift
8000 lb lift capacity, meter reads 2896 hrs. enclosed cab, 3 stage, propane, Solid pneumatic tires, good working condition. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

586
JLG 2646 Scissor Lift
Electric, 26' lift w-extendable platform, good working condition. meter reads 986 hrs.. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

600
2004 Volvo L45B Wheel Loader
Hydraulic system was rebuilt. 4500 hours. Some seepage around engine. Quick attach. No attachments. The engine hood plastics has a few cracks (see pictures). Good working condition. Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

601
John Deere TC54H Wheel Loader
Meter reads 8,116 hrs., has third valve, AC and heat, quick attach, joystick controls, AM/FM radio, air ride seat, PIN DWTC541H589439, John Deere motor, good condition, no forks or buckets, CLEAN 1 owner machine, Engine SN 6068TDW50. DOES NOT INCLUDE ANY ATTACHMENTS. The forks sell as lot # 604. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

602
Case 621D Wheel Loader
Meter reads 5,150 hrs..,AC and heat, joystick controls, Case engine, 1 owner machine, 70'' wide, 46'' long forks, MN 621D, PIN JFF0137419, very good condition. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

603
Case 621B Wheel Loader
Meter reads 9,005 hrs., joystick controls, air ride seat, Case engine, 70'' wide, 38 1/2'' long forks, MN 621B, PIN JEE0051878,  good condition, heat, no AC Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

604
Quick Attach Grapple Forks
66 1/2'' wide, 37'' long forks, fits John Deere TC54H. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

605
Pin On Loader Bucket
31'' x 99 1/2'' wide, 47 1/2'' deep, fits 621D loader. Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

606
Trojan 1500 Wheel Loader
Trojan 1500 Wheel Loader - Cummins 4 cyl. engine, starts and runs well, hydraulics are somewhat slow. Some hydraulic leaks, machine is in fair condition, the forks are 48"x 5" x 1 3/4".
Location: 682 Latimer Hill Road, Canajoharie, NY 13317 Contact: Steve 570.460.0286

607
Loader Bucket with Forks
The Bucket with Forks fit the Trojan Wheel Loader.. This an 8' combination style Bucket. The forks are 48" long with 45" usable due to gussets welded in the corners, they are 6" wide x 2" thick. 
Location: 682 Latimer Hill Road, Canajoharie, NY 13317
Contact: Steve 570.460.0286

608
Forks 60"
Forks are on a 1 15/16" shaft and measure 60" long x 7" wide x 2" thick. 
Location: 682 Latimer Hill Road, Canajoharie, NY 13317
Contact: Steve 570.460.0286

620
2012 Case 750L Crawler Dozer
PIN NBDC70004, meter reads 4450 hours, 6-way blade, 3-tooth ripper attachment, Fully enclosed cab with Heat/AC, Joystick controls, good sprockets, undercarriage in good condition. Very good running machine. Located at 1505 Heide Cooper Rd. Shanks, WV 26761. Call Jonathon 574.349.4380

621
1993 John Deere 550G Dozer
PIN T0550GH793920, meter reads 11,650 hours, only 200 hours on new undercarriage, John Deere engine, open cab, 33" x 105" 6- way blade, 18" wide tracks, 5 roller, long track, very good condition. Arrangement for Ohio delivery available. Reason for selling is seller upgraded to bigger machine. Located at 5683 Hoffman Norton Rd. Bristolville, OH 44402. Call Daniel at 440.693.4232.

629
2006 Chevrolet Silverado Pickup Truck, VIN # 2GCEK13T761220843
Year: 2006
Make: Chevrolet
Model: Silverado
Mileage: meter reads 250,735
Body Type: 4 Door Cab; Crew
Trim Level: LS; LT; Z71
Drive Line: 4WD
Engine Type: V8, 5.3L
Fuel Type: Gasoline
Transmission: automatic
VIN #: 2GCEK13T761220843

Features and Notes: Clean title, good running truck. Located at 1505 Heide Cooper Rd. Shanks, WV 26761. Call Jonathon 574.349.4380

630
2015 Peterbilt 388 Log Truck w/ 2019 Serco 8500 Self Loader
Year: 2015
Make: Peterbilt
Model: 388
Mileage: meter reads 549,720
Engine Type: Cummins L6, 14.9L; Turbo, no def
Fuel Type: Diesel
Horsepower: 625
Transmission: 18 speed Eaton Fuller
VIN #: 1NPWX4EXXFD258118

Features and Notes: 6 axles, 46,000 lb. rear axles, 20,000 lb. front axles, gross weight 85,000 lb. light weight 38,000 lb. 336" wheel base, steerable axle, full lock in rears, double frame, 26' bunk, all gauges work, new PTO, new pump, all new drums, brakes, and pads. Disc brakes in front, Jake brake, cruise, power windows, air suspension. Loader is 22' w/ 4' extension, continuous swivel Rotobec grapple, no leaks. Very good running truck. Clean title.
Located at: 1885 Kinsman Rd. NE North Bloomfield, Ohio 44450. Call Jonathon 574.349.4380

630A
2010 Kenworth W900 Truck, VIN # 1XKWD40X4AJ260307
Year: 2010
Make: Kenworth
Model: W900
Vehicle Type: Truck
Mileage: meter reads 292,000
Drive Line: 6x4
Engine Type: L6, 14.9L; Turbo
Fuel Type: Diesel
VIN #: 1XKWD40X4AJ260307

Features and Notes: Approx. 650 HP Cummins engine, I S x 18 speed, Virgin Michelin tires, It has a wet kit that will operate live floors. double frame, Chalmers suspension, 13,200 lb. front axle, 23,000 lb. (each) rear axles, New rebuilt transmission and clutch with 3 yr. warranty, meter reads 292,000 mi., no DEF, This truck is built to be an off road machine. THIS IS ONE NICE CLEAN MACHINE. A RARE FIND!! Located at Squier Pallet 2522 Co Rd 23, Waterloo, IN 46793. Call Eugene 260.350.8953

630B
TOTALLED International Truck
Truck itself is totalled but has very good Cummins engine with Approximately 175-200,000 miles. 1 fuel tank, the headache rack, toolboxes, and a few tires are still in good condition as well. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

630C
Portable Dock Ramp
56"x32' long, 48" ramp height. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

630D
2,000 Dorsy Reefer Trailer
48 ft. spread axle, aluminum wheels, the whole inside floor is aluminum, side walls are not damaged, clean interior, everything is in good shape. No Reefer unit, road ready, with title and license. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

631
2006 John Deere 437C Knuckleboom
Serial # WC437CL013149, Good running machine. meter reads 16,061 hours, CSI 264 delimber, continuous Rotobec grapple. Heat, A/C, lights, and wipers all in working condition. Mounted on Pitts Kodiak series 3 hydraulic trailer with bucksaw hookups. Clean machine and ready for production. Located at 35359 State Route 143, Pomeroy, OH 45769. Call Jonathon 574.349.4380

631A
John Deere 435C Knuckle Boom Loader with Delimber
SN WC435 x 012259,model 435C,mounted on Big John trailer, brakes on trailer not working,1 rim will be fixed by sale time, engine SN PE6068T555876,heater and AC, nice clean machine, no blade, CTR Delimber with saw, current owner didn't use delimber, meter reads 13,017,hand fuel transfer pump, remote hydraulic hook up, Rotobec grapple, good tires, a well maintained machine, engine was rebuilt at 11,288 hrs. Located at 12973 Sawmill Rd. Allensville, PA 17002. Call Jonathon 574.349.4380

631B
CSI Bucksaw with Log Rack
5' saw blade, hydraulic drive, 6' x 20'. Located at 12973 Sawmill Rd. Allensville, PA 17002. Call Jonathon 574.349.4380

632
Prentice 310E Knuckleboom
Mounted on Pitts Trailer(SN-KB45T3SP950400), Less than 300 hours since complete engine rebuild, pumps replaced, and everything on undercarriage except bearing was replaced, SN-7206782, Made in 2000, Bucksaw hookups, Cab has Heat/AC and radio, Joystick controls, has Prentice continuous swivel bypass bucket, Meter read 9775 hours, Good running machine. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

632A
CTR De-Limber
Direct drive, 36" bar, Good condition. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

632B
Super Grip Grapple
Came off of a Timber Pro forwarder. Fully rebuilt and ready for use, Has not been used since rebuild. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

633
John Deere 335 Knuckle Boom Loader with Delimber
Runs and operates but engine needs rebuilt, hydraulic remote hook up, hydraulic works good, Barko 4250 grapple, meter reads 5,915 hrs. Located at 332 Halls Rd. Millerstown, PA 17062. Call Jonathon 574.349.4380

634
Timberking TK520 Knuckleboom
Meter reads 2,039 hrs., Cat engine M3065E,SN TK520PR59939, 50% thread on tires, good trailer, heat and AC, SN 35601172, MN TK520, Rotobec, grapple, SN 3070016RO-538378, MN 4642-B-BEL-F5-5, good running machine, new turn table bearing and seals, new injector pump. Located at 8814 Township Rd. 559 Millersburg, OH 43824. Call Eugene 260-350-8953.

635
Morbark Portable Chipper
1991 Chipper/waste recycler, w-cab, has self sustained knuckleboom, self contained hyd. unit, hasn't ran much in years, has some hyd. leaks, road ready although lights could be questionable. 1st lot of an entirety. Located at: 11606 Brickyard RD Holton MI 49425 Contact Eugene 260.350.8953

636
Cummins Power Unit
650 HP w-clutch, start right up and runs good. Meter reads 1451 hrs. located at: 11606 Brickyard RD  Holton MI Contact Eugene 260.350.8953

637
Entirety for Lots 635 & 636
Complete chip/recycler unit with power unit. Located at: 11606 Brickyard RD Holton MI Contact Eugene 260.350.8953

638
Vermeer HG200 Portable Horizontal Grinder
Includes pallet of extra parts(screens,teeth, etc.), Pintle hitch, Meter reads 57 hours but machine is believed to have 1700 original hrs. Powered by a 4 cylinder Cumins, Approx. 120 HP. Belt conveyor infeed, Fold-up conveyor outfeed, 16"x24" infeed capacity, VIN-1VR2171K561000139, Good running machine in good condition. NICE UNIT! Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

639
2012 Dyna Firewood Processor
Model-SC-14, SN-18201, 6'x6' fold up 3-strand infeed deck, Kohler CH940 gas engine(SN-4108800171), Pulls with 2" ball, Hydraulic pumps and cylinders on everything, 24" cut-off bar, 10'6" chain conveyor, 12' adjustable incline belt conveyor-12" belt, Hydraulic controls, Includes 4-way and 6-way splitting heads, Everything works as it should, Good working machine. Located at 12722 Co Rd 2 Edon,OH 43518. Call Jonathon with any questions at 574-349-4380.

640
New Portable Saw Mill
It is powered by a 14 hp 429cc Kohler gas engine with a centrifugal clutch and has a 2'000 lb winch to raise and lower the head. It has a 16' capacity and uses 1 1/4'' blades.  Brand new and never used.  Item is located at 150 Seybert Ave White Pigeon Michigan 49099. Load out within 30 days. Call Bronson with questions 574-210-3721 

640A
2022 NEW Timber Buddy MP362 Portable Sawmill
Manual production mill. See description in photos.
Location: 5579 St Rt 414 Romulus, NY 14541.
Contact: Steve 570.460.0286

640B
Lumber Tiger Band Mill
2001  690 Hrs. total run time on this mill!! Was completely refurbished & updated by Lumber Tiger in 2021,Fully hydraulic, Kubota  Diesel power unit,  bed is 40' long (36' log capacity) however 20' section can be removed, 36'' band wheels, 3.5'' drive shaft, 48'' opening between guides,  two hyd. turners, hyd. feed, up & down & squaring pins are hyd. one hyd. dog,  2 manual dogs, 2 hyd. tapers/rollers, 1 manual taper, no leaks, This is a HEAVY DUTY mill that was never used hard and is in very good condition! Located at 7095 ST RT 534 West Farmington OH 44491  Contact Eugene 260.350.8953

641
2016 Wood-Mizer LT70 Portable Bandmill
(sn: 456C72412FNKA4003)  mfg. date 10-13-15, hours 1979, includes laser debarker head.  Added Woodmizer Bracing on Shaft.  Yanmar Diesel Engine.  35-40 extra blades most new.  Loader Available for loading.  Owner recommends a flatbed for transport.  Located @ 87 I-B Maynard Street, Spencer, TN 38585  Contact Zach for more information.  Loading available 7 days a week with appointment.  

641A
2010 LT70 Super Wood -Mizer Band Mill
12,000 hrs, fully loaded, debarker, has the updated DCS control module with accuset II setworks, 55 HP Yanmar diesel, 36''X20' log capacity, has been well maintained but could use some work on the track. Located at: 3385 Armenian RD Sherman NY 14781 Contact Eugene 260.350.8953 

642
2014 TimberKing 2000 Band Mill
1 owner machine. SN: 1433. Fully hydraulic with computer setworks. 35 HP Kubota diesel. Only 1500 hrs. Always under roof. We removed the log loader attachment to use a separate log deck(not included). Log loader attachment will sell with machine. Has the Timberking board drag back system. Is currently set up to saw stationary but is a portable mill and axle with like new tires is included. Blade height from deck will go to 29”. Can saw up to 20’ log. Can handle very large logs due to deep cut throat. Is set up to use 1 1/2” bands but can be set up for 1 1/4”. Bi-directional chain log turner. In-line log debarker. All kinds of extra parts. A very nice high production portable band sawmill. Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

643
2014 Cooks AC-36 Thin Kerf Portable Sawmill
Meter reads 2177 hours with second engine, total hours on mill are unknown, has minimal wear and is overall in good working condition. 1 1/2'' x 26'' band wheels, 2''bands, Murphy controls on engine, skid of parts, Cat diesel engine, debarker, fully hydraulic, unitronics computer controls,12V. Located at 332 Halls Rd. Millerstown, PA 17062.Call Jonathon 574. 349. 4380

645
2020 Wood-Mizer LT40 Portable Sawmill
VIN 456062412LNKK7459, 36" x 21' log capacity, 35 HP Kohler gas engine, fully hydraulic, wide throat, debarker, only 58 hours, includes manuals, always stored inside, like new condition. overall dimensions 7' x 26' 4". Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

646
Wood-Mizer LT30 Portable Sawmill
VIN 456B420102NCJ4623, meter reads 1404 hours, debarker, log turner, Kohler 25 HP gas engine, includes manual and 20 extra blades. No axle. Always stored inside. Very good condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

650
1999 Woodmizer LT40 Portable Bandmill
VIN-456A32416XNEG9255, Meter reads 5508 hours, 1 1/2"x13'2" bands, 1"x18" band wheels, Kohler gas engine(SN-4717202071) has less than 500 hours, Approximately 25 hp, Manual controls, Has debarker attachment, Pulls with 2" ball hitch, 44"x8' log bed, 24' overall, Lights do not work, Includes 5 new blades and approximately 50 used blades, Various spare parts included, Everything works as it should, Good machine ready for production. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

651
Woodmizer LT40 Log Bed Extension
44"x24', Includes drive chain to hook up to LT40 mill, Good condition. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

652
Wood-Mizer LT30 Portable Sawmill
Serial # 01851412AL, Kohler 25 HP engine, works good. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

653
Wood-Mizer BMS250 Sharpener
BRAND NEW!! comes with a new 5'' Turbo grinding stone, & 5 gallons of sharpening oil.  Located at: 11606 Brickyard Rd Holton MI Contact Eugene 260.350.8953

660
Portable Band Mill
Set up for line shaft drive, Manual head and blade set, 1"x24" band wheels, 1 1/2" bands, 34' overall, 28"x18' log bed, 1/4" steel cable, Shop-built. Located at 1461 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380.

661
Cummins Power Unit
65 hp, SN-53125291, Model-4A2.3-P, Includes 12 gallon fuel tank, Meter reads 2860 hours, 2500 rpm, 12V battery. Located at 1461 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380.

662
Band Saw Blades
1 1/2"x14'10", 60 blades total, 30 used, 30 new in box. Located at 1461 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380.

663
Head Rig, Carriage, and Track
Shop Built, 1 1/2" x14'6" bands, Set up for PTO drive, Handset controls, 1"x24" bandwheels, 32"x15' carriage, 27" center to center of tracks, 40' long track(in (2) 20' sections, 1/4" cable. Located at 490 Amish Rd. Sonora, KY 42776. Call Jonathon with any questions at 574-349-4380

664
Crown Electric Pallet Jack
Not currently working, Unsure of issue, 4"x42" forks, 3500 lb. capacity, SN-1A165566, Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

665
Tyler XL Bandsaw
SN-4039-98, 460V, Has power feed rolls, 2"x36'' bandwheels, 2" bands, 20 hp electric motor. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

666
Diehl Straight Line Rip Saw
Model-SL52, SN-73M-3260-2459, 80"x8' tabletop, 5' tall, 440 V, 220 plug in. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

667
Diehl 750 Straight Line Rip Saw
220 plug in, 55"x78" tabletop, 56" tall, In working condition. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

668
Weima Horizontal Grinder and Conveyor
Meter reads 12,947 hours, Made in 2014, Model-WLH300, Machine #-600-674, 460 V, Electric drive, 6"x11" infeed capacity, Includes electrical box with soft start, Includes 47' of vibrating conveyor infeed with electric drive, 10" pan, 4" sides, In very good condition. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

669
Doucet Return Table
Model-FB-24-3-9-G, SN-7004-10-220, Needs to be assembled, Electric drive. Located at 2935 N 500 W Shipshewana, IN 46565. Call Dan with any questions at 330-749-9478.

669A
Paul Optimizing Chop Saw
Model # MAXV4.OMV, serial # 99-908.06, has power infeed. Located at 2935 N 500 W. Shipshewana, IN 46565. Call Dan 330.749.9478

669B
Ladiag Silo Unloader
Model# 4345
Serial# SN1924345
Complete in operating condition
7.5 hp. Hydraulic power unit
New in 2020 hydraulic rotary union
No electrical controls.
Located at 2935 N 500 W. Shipshewana, IN 46565. Call Dan 330.749.9478
 

670
Delta Table Saw
43"x60" table top, 3' tall, 14" blade, Electric drive, Model-34790A, SN-2468. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

671
Outdoor Furnace
Wood-burning, Firebox is 2 years old, 26' of spray foam insulated hose, 5'x64"x6' tall. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

672
Woodcutting Band Saw
2"x36" band wheels, 1/2" bands, 55"x88' table top, 98" tall, 220 plug in, Condition unknown. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

673
Mattison Machine Works 276 Moulder
4'x8'x5' tall, Machine weight-9,000 lb, Electric drive,7"x4" capacity, 4 cutting heads, SN-19915. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

674
RENS P-3000 Portable Metal Detector
Comes with case and charger, Works as it should. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

676
Self Dumping Hopper
3'x4'x2' deep. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

677
3 Lumber Carts
All 3 carts are 3'x6', I solid steel, 2 have wooden surfaces. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

678
Skid Steer Snow Blade
Quick attach, 90" wide, Hydraulics for blade angle adjust, Replaceable cutting edge. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

679
Belt Conveyor
66"x17', 29" belt, Hydraulic drive, Heavy duty shop built, Adjustable legs on one end. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953. Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

680
3 Strand Log Deck
80"x12'x44" tall, No drive or chain, 45" nose skide. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

681
Milwaukee Band Saw Table
Set up for pipe clamp. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

682
Box of Milk Pails
Approximately 75 pails, 1.5 gallon, Includes side panels for more buckets. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

683
Vertical Air Tank
150 gallon, 22"x76" tall, Brand new, never used. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

684
Iron Bull Bottom Discharge Hopper
54"x64"x56" deep, In good condition. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

685
Iron Bull Bottom Discharge Hopper
54"x64"x56" deep, In good condition. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

686
Serco Knuckleboom Grapple
All new bushings and pins, New rotator, Good condition, Ready to use. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

687
Fork Extensions
50"x8'x6' tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

688
Slab Rack
45"x82"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

689
Slab Rack
45"x100"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

690
Slab Rack
45"x82"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

691
Slab Rack
45"x100"x34" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

692
Decline Lumber Stacker
56"x80", 42"-33" tall. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953.Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

693
Assorted Galvanized Dust Pipe
6" and 8" pipe, Assorted fittings. Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953. Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

694
Natural "Puddingstone" Boulder
Located at 9603 E 80th St Reed City, MI 49677. Call Eugene with any questions at 260-350-8953. Loadout available Monday-Friday, NO LOADOUT AVAILABLE SAT-SUN

695
North Tech Edge Sander
Model-NT-120ED-HD, SN-93120ED52, 7.5 hp, 440V, 3 ph, 9" x 138" belts, Includes 3 extra belts. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

696
Exhaust fan w/ pipe
Electric drive, 3 ph, 5 HP motor, Includes all controls & 8' of 24" galvanized steel pipe not attached. will be disassembled by the owner. Free loading. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

697
Exhaust fan w/ pipe
Electric drive, 3 ph, 5 HP motor, Includes all the controls & 8' of 24" galvanized steel pipe not attached. will be disassembled by the owner. Free loading. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

698
Yanmar Generator
17 KW, Phase convertor and electric box with starter, 3 phase, has auto start, was taken out of production 5 months ago. In good running condition. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

698C
Honeyville Complete Dust Collection System
Blower, cyclone, silo is 10' diameter, baghouse filter, includes 30" main trunk line dust pipe, 100 HP main blower, 10 HP transfer blower, 460V 3 phase. Good working condition. Buyer is responsible for removal. Metal Monkey is available for rigging. Must be removed by July 8th. Located at 6086 OH-241 Millersburg, OH 44654. Call Dan 330.749.9478

698D
Dixie Dust Collection System
Baghouse unit with air jet cleaner, 16" blower inlet, 25 HP blower, 460V 3 phase. Good working comdition. Buyer is responsible for removal. Metal Monkey is available for rigging. Must be removed by July 8th. Located at 6086 OH-241 Millersburg, OH 44654. Call Dan 330.749.9478

699
24" Dust Blower
8" inlet, 8" outlet, 20 hp electric motor, Includes extra pipe fittings, Mounted on stand w/ castors. Located at 3676 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

700
Curtis Air Compressor
80 gallon vertical tank, 7.5 hp electric motor, Model -E-57A, SN-EA7190633. Located at 3676 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

701
2-strand Transfer Deck
7'x11'6"x30" tall, No drive. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

702
Modine Cooling Unit for Natural Gas Genset
66"x90"x8' tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

703
Woodmizer 4000 Band Mill
Frame is still in Good condition, Everything else needs to be completely rebuilt/replaced, Includes panogram arm and post, SN-WM4000D12-11130444-A3.00, 80"x27'x104" tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

704
Log Trailer Bunk
10'4"x12'4"x68" tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

705
Cornell Barn Sweep Pan
No chain or drive, 45"x30'. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

706
30 HP Electric Motor
1765 rpm, 286T frame. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

707
7.5 HP Hydraulic Unit
36"x38"x52" tall. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

708
Lincoln Ideal-Arc R3S-325 Welder
SN-AC471275, Includes 3 full rolls of hard face wire, 480V, 3 ph. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

709
Woodchuck Bag House Dust Collector
220V, 3 ph, 38x72 bag size, In good working condition. Located at 3644 N 1100th St. Flat Rock, IL 62427. Call Eugene with any questions at 260-350-8953.

710
3 Sided Hopper
8'x8'x4' deep. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

711
Air Lift Table
60"x80" surface. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

712
2 Tag Quick Attach Backhoe Buckets
(1) 16", (1) 12", QC30 coupler. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

713
2 Tag Quick Attach Backhoe Buckets
(2) 12" buckets. QC30 coupler. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

714
Belt Conveyor
32"x40', In 2 sections, No drive, 28" cleated belt. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

715
Catwalk Steps
Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

716
Dog Kennel
(4) 24"x30"x24" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

717
Dog Kennel
(4) 24"x30"x24" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

718
Dog Kennel
(4) 24"x30"x24" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

719
Dog Kennel
(6) 24"x30"x16" tall cages. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

720
Hay Wagon
Fiberglass, 8'x20', 5' tall rack in back, Pin hitch. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

721
CAT C4 Power Unit
SN-NR360007, 111 hp, Good condition, Includes 12"x55"x36" hydraulic tank and 16"x55"x24" fuel tank, No hydraulic pump or clutch. Located at 9545 E 925 N Odon, IN 47562. Call Eugene with any questions at 260-350-8953.

722
Kubota D1105 Power Unit
12.5 KW @ 1800 RPM. 18 HP @ 1800 RPM. 22 HP @ 3000 RPM. Very low hours. Control panel. Runs very nice. Bellhousing H5 flywheel for 6" clutch. Needs new run solenoid. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

723
John Deere 4045T Power Unit
110 HP. Rebuilt by the Military in 2012. Ran 640 hours on air compressor. Good used Rockford clutch. Murphy controls. Very good condition. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

724
John Deere 6404TA Power Unit
Turbo & After cooled. 155 HP. 3015 Hours. WPT pilotless clutch. Murphy controls. Runs very nice. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

724A
Kubota D850 Power Unit
24 HP. Very low hours. Control panel. New WPT clutch. Runs very nice. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

724B
Kubota D600 Power Unit
20 HP. Very low hours. Control Panel. Stubshaft 1 1/4" diameter. Runs very nice. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

726
Enco Lathe and Drill
Comes with lots of tooling and operating manual. Belt drive. Good condition. Location: 11751 CR 12, Middlebury IN 46540. Contact Darrin @ 574.349.8485. Removal 14 days. This lot is subject to 7% sales tax unless a valid exemption is submitted.

727
Wood-Mizer Band Blades
15 Brand new plus 40+ used 1 1/2", .055, 747 silvertip blades. 14' 6". Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

728
Cooks Cat Claw Band Sharpener and Suffolk Tooth Setter
Electric drive. Good condition. Comes with a Suffolk dual tooth setter. Location: 185 Shelton Rd, Parrottsville TN 37843. Contact Gaylord @ 574.536.1646.

729
Information Lot for Lots 730-746
These lots were taken out of production 12 years ago. It was stored inside until 1 year ago. Lots 730-737 are offered individually then as an entirety at lot 738. All located at 93 Main St, Palatine NY 13428. They are all uninstalled and ready to load. Loadout hours are 7 AM - 4 PM. Contact Gaylord @ 574.536.1646.

730
Industies PHL Band Head Rig
Model: B-63. SN: S-106. RH. Air strain. Both band wheels are good. Was not in production for 12 years. Location: 93 Main ST E Palatine Bridge NY 13428. Contact Gaylord @ 574.536.1646.

731
HMC 4 HB Carriage and Track
Carriage is a #50 and RH. 4 HB. Silva Tech setworks. 30" x 26' capacity. 60' of track included. The carriage was completely rebuilt 1 year before shutdown. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

732
HMC Cab
In very good condition inside and out. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

733
HMC Vertical 3 Blade Edger
2 stationary and 1 moveable. All blades move up and down with hydraulic. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

734
Carriage Drive
With hydraulic unit, cooler, drum, and cable. Complete and in good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

735
150 HP Electric Motor
This came off of the headrig. Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

736
Band Blades
15 bands. 10" wide x 32'8". Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

737
Electric Soft Start
Fair condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

738
Entirety of Lots 730-737
With 10% raise. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

739
2 Strand Transfer Deck
4' wide x 10' long. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

740
Metal Detector
This one had a minor fire damage. It still works. No control box. 16" x 16' belt. Electric motor. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

741
Buffalo 70" Blower
30" diameter intake. 25" diameter outlet. With a 30" to 25" reduction pipe. Lots of 25" piping included. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

742
Chain Conveyor Wheels
3 wheels 9" x 24" diameter. Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

743
38 HP Iveco Diesel
It has a new radiator but engine needs to be rebuilt. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

744
Detroit Engine For Parts
Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

745
Valve Bank
V Pulley Sprocket pulley included. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

746
Hydraulic Unit
In fair condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

747
New 84" Driveway Grader
Skid steer quick attach, 2- hardened and replaceable cutting edges, replaceable runners, easy adjustment at both ends of each blade, heavy duty, powercoat finish. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Loadout and shipping available. Shipping is at buyers expense. Call Jonathon 574.349.4380

748
Portable Sheep Working Chute
Unit tilts for easy foot care etc. wide range of adjustment for small and large animals, good condition, 22" wide, 55" tall, 67" long. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Loadout and shipping available. Shipping is at buyers expense. Call Jonathon 574.349.4380

749
4 1/2'' Metal Bandsaw
16" x 35" x 45", has new blade, portable, good working condition. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Located at 2954 S Montgomery Rd. Cadiz, KY 42211. Loadout and shipping available. Shipping is at buyers expense. Call Jonathon 574.349.4380

750
Helle Green Chain
10' x 17'. 3 strand. W-C55D roof top chain. Hydraulic drive. Good condition. Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions. 574-210-3721

751
Generac 20KW Genset
It has only 109 hours and was used as a stand by unit.  It has a 4-cylinder 3.0 liter natural gas powered engine, auto start, on board battery charger, 120/240 volt and is in good working condition. Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions.  574-210-3721

752
Winco Automatic Transfer Switch
Automatically turns on generator when low power is noticed and connects back to main power source when power is restored.   Solar power capable.  Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions  574-210-3721

753
Radiator for Power Unit
It is approximately 42'' wide x 61'' high.  It was last used on a Waukesha power unit model F1197GU before it was removed. Item is located at 1818 5th Rd, Bremen IN 46506 Call Bronson with questions 574-210-3721

754
Non-Powered Rollcase
8' long., 16" x 3 1/2" rolls on 1" shafts. 20 1/4" roll spacing, the height adjusts from 32 1/2" to 41".
Barely used has new paint.
Contact Steve Bauder 570-460-0286
Location: 61 Kempsville Road, Kutztown, PA 19530

755
Non-Powered Rollcase
19' long, 16" x 3 1/2" diameter rolls on 1" shaft. Spaced 24", 35" high. Barely used, has new paint.
Contact: Steve Bauder 570-460-0286
Location: 61 Kempsville Road, Kutztown, PA 19530

756
Steel I-beams
Four (4) I-beams: 24" tall 7" wide 25' 3" long .395 web 1/2" flange weight is 1,400# each. Nice straight beams.
Location: 20814 Lehmans Mill Rd., Hagerstown, MD 21742
Contact: Steve Bauder 570-460-0286

757
Fuel Tank 1,000 Gallon (Leak)
1,000 gallon fuel tank that is damaged and has leak.
Location: 20814 Lehmans Mill Rd., Hagerstown, MD 21742
Contact: Steve Bauder 570-460-0286

758
Fuel Tank 1,000 Gallon
1,000 gallon fuel tank with electric fuel pump.
Location: 20814 Lehmans Mill Rd., Hagerstown, MD 21742
Contact: Steve Bauder 570-460-0286

759
Electric Motors on skid
One (1) skid of 7 total electric motors:
One (1) 5 HP; One (1) 2 HP; Two (2) 1/2 HP; One (1) 1/4 HP gear motor with 58.1 ratio; Two (2) unknown
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

760
Wisconsin Engine
4 cylinder Wisconsin engine.
Good running condition.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286
 

761
Mercedes Benz Diesel Engine
4 cylinder Mercedes Benz Diesel Engine.  Currently not running.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

762
Jointer
8" Jointer.  No drive.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

763
Truck Tool Box
Delta truck tool box.  20" wide, 60 1/2" long, 11" deep
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

764
Conveyor
Conveyor 12" x 18' with gearbox.  No drive.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

765
Tailing Belt
Tailing Belt. 18' long off Frick edger.  Has 4 1/2" and 13" belts. 42 1/2"inside mounting bracket.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

766
Electric Motor
20 HP 3 Phase Electric Motor
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

767
Oil Gear Hydraulic Motors
Two (2) Oil Gear Hydraulic Motors: PVWH20RSAY CN-NN
2.83 CID; 2500 PSI; 3000 Max; 2400 Max RPM.
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286
 

768
Metaris Hydraulic Motor
Metaris Hydraulic Motor.  Brand new.
3.94 CID
#MHM31A842JEAL20-30
Location: 332 Oak Dale Rd., Salisbury, PA 15558
Contact: Steve Bauder 570-460-0286

769
Loader Bucket
Loader Bucket 8', unknown make and model. Has been welded and modified.
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286
 

770
Steel I-Beams
(4) Galvanized I-Beams
12" web, 4" wide, 1/4" thick, Lengths are: 15' 3", 15' 8", 16" 9", 17' 7".Base plate: 16 1/2" x 7"
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

 

771
Log Deck
Forest-All Log Deck, 2 Strand, 15' x 5 1/2' 3HP with Drive
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

 

772
HMC Shavings Mill
HMC Shavings Mill - 2009, 20 HP Hydraulic Drive, Double Head with 00HP motors.
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

773
Dust Blower
Sawdust Blower, unknown make and model, not tested.
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

774
I-R Air Compressor
Air Compressor.  5 HP 3 Phase.  Motor Model # M3218T
Location; 276 River Rd. Caledonia, NY 14423
Contact: Steve Bauder 570-460-0286

775
Miller Welder SRH - 303
Primary 230/460, 60/30 Amps, 14.4 KV, 24 KVA, 3 Phase.

Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286
 

776
Steam Cleaner
Hotsy Model-S5735-3, 3000 PSI, 225 degrees, 460 VAC, 3 Phase
3,361 hours.  Natural gas powered for heat, can be converted to propane.
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

777
Drill Press
Powermatic Model 1150.
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

778
Vacuum Pump
SOGEVAC Model SV-40, 2HP, 208V
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

779
Plasma Cutter
Thermal Dynamics PAK Master 150XL
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

780
Metal Band Saw
J. A. Fay & Egan Band Saw
Location: 3295 Bath Rd., Penn Yan NY 14527
Contact: Steve Bauder 570-460-0286

781
Trailer Chassi
Only yard ready. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

782
Spiral Rollcase
24" x 12' long. New paint. No drive. Good condition. Location: 93 Main St, Palatine NY 13428. Contact Gaylord @ 574.536.1646.

783
Powermatic Shaper
Model # 26, serial # 8126556, 3/4" spindle, single phase, 2 HP, 115V/230V, excellent condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

784
Wood-Mizer Sharpener
Very good condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

785
Larick Profile Sander
Model 360AIR, serial # 22022, 7 different sanding heads, no motor, very good condition. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

788

786
New Wright Self Dumping Hopper
1 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

789

787
New Wright Self Dumping Hopper
2 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232.

790
Dewalt Chop Saw
Electric. In working condition. 8' infeed and 8' outfeed rolls. Located: E10168 Yttri Rd, Readstown WI 54652. Call Gaylord at 574.5363.1646 for any questions. Removal 14 days.

799
Information lot for items 800-820.
Located at 9805 Hwy 24E. Centreville, MS 39631.  Rigger Option Available: Mike Sartin  225-931-4899.  If using another rigger or rigging yourself, must provide Certificate of Insurance for $1 million in liability insurance.  Submit copy to ak@brightstarauctions.com.  

800
4 Strand Log Deck*
Hurdle 21'x17'wide, 4th strand added on H-78 chain, Tulsa Winch Drive Hydraulic, 4 arm stop and loader. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

801
Hurdle Magnum LT Sawmill*
to include 3 head block carriage, 17' carriage, carriage extended 2 ft, 13' dog centers, 40" openings, (3) 2 1/2 1045 axles, 12" wheel,48" track center, variable tapering, complete wiring package, features of the Magnum LT Carriage include 5x5x1/2 tubing frame vs. 4x6x3/8, 1/2x 8 angle bases vs. 1/2x6, 3/4x4" base wear plates vs. 3/4x3. Simple Tong Dog design, infinite variable tapering vs. 2 position dogs open 29" vs. 22 (no need for hammer dog) 40" openings vs. 36" , #100 headblock chain vs. #80 chain. 1 1/2" chain idler pin vs. 1 1/4" pin, Mac Air valves, cant turners, Nano setworks, 57.5 ft. track Cable Drum w/45T Cab Husk, no saw mandral, setworks in cab, hyd. Feedworks, off bearer belt. No main motor drive. Set carriage was replaced new in 2017. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699, Removal 30 days.

802
Live Rollcase*
22' with (9) 10'x30" rolls. Support to floor only. 5 hp gear motor drive. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699, Removal 30 days.

803
Rollcase*
35' (17) 6"x32" rolls includes 12' lift section for slab all out, support to floor. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699. Removal 30 days.

804
3 Strand Lumber Deck*
20'x8'4" wide, air bag pop up, S drive constructions, 81X chain, heavy duty, gear motor drive, support to the floor. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

805
Miner 3 Saw Edger*
2 movable 30"x 4", 14" blower, 25 hp motor, no motor controls, hydraulic set works. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

806
Transfer deck to edger*
8'x16' wide. H78 chain, gear motor drive, no support steel. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

807
5 Strand Transfer Deck*
8'x17'6" wide in floor transfer deck 5 strands, (4) H-78 roof top chain, (1) H-78 gear reductions drive, no support steel. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

808
Double End Trimmer*
20', 2 saw will cut up to 9" cant, Individually driven saws, 22' block removal conveyor. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

809
Belt Waste Conveyor*
13'x22" with gear reduction drive, no support steel. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

809A
Green Chain*
40'x8'x6" with S drive constructions, 81X chain, no drive.  Located at 9805 Hwy 24E, Centreville, MS 39631.  Rigger: Mike Sartin 225-931-4899 Contact Zach for information  931-224-0699  Removal 30 days

810
Barnsweep type conveyor*
55' with 42" pan and drive, no support steel is located under mill. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699. Removal 30 days.

811
Belt Conveyor*
15'x8" with gear reduction drive, under mill. No drive. Located at 9805 Hwy 24E, Centreville, MS 39631.Rigger: Mike Sartin 225-931-4899 Contact Zach for more information. 931-224-0699. Removal 30 days.

812
Tank Mount Air compressor*
Curtis 10 hp, no motor controls. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

813
Green Chain Deck*
30'x10' wide 4 strand with 81X chain, no drive. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

814
Shaker Screen*
Precision 6x6' (sn: S1899) (out) Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

815
Cyclone*
5' Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699. Removal 30 days.

817
Cant Cut-Off Saw*
Hydraulic operator, 15 hp motor and hydraulic 20 hp motor on saw, 32" carbide tip saw, 42" hydraulic cylinder. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699 Removal 30 days.

816
Chip Blower
Phelps F38KW with 25 hp with dust load out chute and pipe. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699 Rigger: Mike Sartin 225-931-4899 Removal 30 days.

818
Concave Belt Conveyor frame and roller*
165'x20", no belt, no drive, 110' on yard, 55' still installed. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699 Rigger: Mike Sartin 225-931-4899 Removal 30 days.

819
Rollcases*
15' with (5) 30"x6" rolls, 23' rollcase with (9) 24"x6" rolls, 17' rollcase with (7) 24"x6" rolls, 14' rollcase with (4) 19"x6" rolls, 22' rollcase with 40"x10" rolls, all are out on yard, NO DRIVES. 5 rollcases total. Located at 9805 Hwy 24E, Centreville, MS 39631. Contact Zach for more information 931-224-0699. Rigger: Mike Sartin 225-931-4899 Removal 30 days.

820
Belt Conveyor*
22'x 10" conveyor with gear reduction drive, 16'x14" belt conveyor, no drive, Both are out on yard. Located at 9805 Hwy 24E, Centreville, MS 39631. Rigger: Mike Sartin 225-931-4899 Contact Zach for more information 931-224-0699 Removal 30 days.

850
International DT 466 diesel engine

821
Morbark 640 Debarker*
75 hp motor with cab and controls. Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

822
Soft Start starter and disconnect
for the Debarker Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

823
(2) Log Decks
Morbark 22' 2 strand log deck, hydraulic drive, 9' support steel, 8' wide.Located at 1052 Reason Rd. Williamson, NC. . 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

824
Log Trough
Morbark 40' Endwise log trough, 19" track type chain, hydraulic drive.Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

825
Log Trough
Morbark 40' Endwise log trough, 19" track type chain, hydraulic drive, (2) 3 arm kickers. Both kick in same direction.Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

826
Bark conveyor
Morbark 30' drag chain type, 12" wide, hydraulic drive. Located at 1052 Reason Rd. Williamson, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

827
Waste Conveyor
Morbark 36" wide, 14' long, mounts under Debarker hydraulic drive.Located at 1052 Reason Rd. Williamson, NC.  30 days removal. Contact Zach Kittrell for more information. 931-224-0699

828
Tie Back of Lots 821-827
With 10% raise. Located at 1052 Reason Rd. Williamson, NC.  30 days removal. Contact Zach Kittrell for more information. 931-224-0699

829
Cambio Ring Debarker
30", 75 hp motor, individual hydraulic motors on heads, Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699. 1st lot of an entirety

830
Infeed trough
13' floating infeed trough for Debarker, hydraulic drive. Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

831
Cab
7'x7' Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699

832
Cambio Debarker Frame
85' steel frame under Cambio Debarker. (3) 21" I Beams.  with axles and tires.   Located at Plymouth, NC. 30 days removal. Contact Zach Kittrell for more information. 931-224-0699.

833
lots 829-832 tied together with 10% raise
lots 829 thru 832 tied together with 10% raise*

841
Fastline Band Resaw
mounted on trailer deck 102" wide made to handle 12' material. Has return belts, 21' over all length. Resaw located at 155 Smith Mill Road, Smithville, AR 72466 Contact Zach Kittrell for more information.  931-224-0699 30 days removal. 

842
Up Cut saw
with 6'x12" gravity roll case. No motor, Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

843
Belt conveyor
33'x12" with Gear motor drive.Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

844
slant slide
20' steel. Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

845
Grapple Bucket
66" Universal quick attach for skid steer. Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

846
(4) Rolls
1 partial roll 1" x .05 AAR Black plastic banding, 1800SW. Located at 1765 NC Highway 66 South, Kernersville, NC 27284. 30 days for removal. Contact Zach Kittrell 931-224-0699.

847
Waukesha Natural Gas Power Unit
w-clutch, runs as it should, slight leak in manifold gasket. Was running untill last year. Still a nice unit.
Located at: 11606 Brickyard RD Holton MI Contact Eugene 260.350.8953

848
Waukesha Natural Gas Genset
meter reads 249 hrs. 150 KW (continuous) Kohler generator. Just fired up this week and runs very good. Generator tested AOK! Nice unit! Located at: 11606 Brickyard RD Holton MI Contact Eugene 260.350.8953

849
John Deere Power Unit
Model # 6359 TL, w-clutch, meter reads 2153 hrs. 6 cylinder, starts and runs good. Located at: 5179 Larson W RD West Farmington OH Contact Eugene 260.350.8953

850
471 Detroit Diesel with Clutch
The engine starts and runs very well. it has just been serviced and tested. The clutch engages and works. 
Location: 362 County Hwy 30 Jordanville, NY 13361
Call Steve: 570.460.0286

851
CNG Burn Table
10' x 30' with tracer eye, 400 stored shapes, burny five control system, plasma or oxiacceteline powered, good condition. Located at: W14958 Babit Ave Gilman WI 54433 Contact Eugene 260.350.8953

852
Double Head Notcher
Brand new shop built, with indexable teeth, plunger feed, rated at 55 stringers per minute, line shaft ready. Includes dust blower. Located at: UPDATED! 726 Audrain RD 152 Clark MO 65243 Contact Eugene 260.350.8953

853
JD 4000 Cable Winch
4000 series, off of a JD Skidder, in good condition. located at: 407 Clark Store Sinking Fork RD Cerulean KY Contact Eugene 260.350.8953 

854
Transfer Deck
7' x 16', hydraulic drive, includes structural steel to ground. 
Location: 682 Latimer Hill Road, Canajoharie, NY 13317
Call Steve: 570.460.0286

950
Rough Cut Maple Slabs
26"x88", 2-3" thick, 10 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

951
Rough Cut Walnut Slabs
26-34"x94-96", 2-2 1/2" thick, 9 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

952
Rough Cut White Oak Slabs
30-42"x11'6", 1 3/4"-2 1/2" thick, 7 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

953
Rough Cut White Oak Slabs
50-55"x11'6", 2-2 1/2" thick, 4 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

954
Rough Cut White Pine Beams
6"x10"x12'3"-12'6" long, 42 total, Cut 2/22. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

955
Rough Cut Walnut Slabs
15-34"x48-52", 2-2 1/2" thick, 8 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

956
Rough Cut Spalted Maple Slabs
36-54"x112", 2-2 1/2" thick, 10 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

957
Rough Cut Spalted Maple Slabs
36-55"x9'8"-10', 2-3" thick, 6 total, Cut 4/22, Green. Located at 5552 Sidney Rd Sheridan, MI 48884. Call Eugene with any questions at 260-350-8953.

958
Cherry Slabs
31"-38"x11', Kiln Dried, 2" thick, 2 pieces, 64 board feet each. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

959
Walnut Slabs
Kiln Dried 22"x10', 4 total, 2" thick. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

960
Walnut Slabs
Kiln Dried 2-(212"x7', 2 1/2" thick) 2-(13-21"x9', 1 1/2" thick) 4 pieces total. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

961
Walnut Slabs
Kiln Dried, 19-24"x8'x9'6", 2" thick, 6 total. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

962
Walnut Lumber
Kiln Dried, 81 board feet, 7/8" thick, 9' long, 4-6" wide. Located at 241 5B Rd Bremen, IN 46506. Call Dan with any questions at 330-749-9478.

963
15/16" Hickory Lumber
934 Board feet, 4-7" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

964
4/4" Red Oak Lumber
622 Board feet, 4 1/2"-8 1/2" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

965
15/16" Hickory Lumber
329 Board feet, 4-9" wide, 12' Long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

966
5/8" Mixed Species Lumber
919 Board feet, 6-9" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

967
15/16" Red Oak Lumber
459 Board feet, 6-10" wide, 10' Long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

968
15/16" Red Oak Lumber
423 Board feet, 6-10" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

969
15/16" Red Oak Lumber
364 Board feet, 7-13" wide, 5-8' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

970
15/16" Hard Maple Lumber
658 Board feet, 8' Long, 6-11" wide. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

971
15/16" Hard Maple Lumber
504 Board feet, 10'6" long, 4-12" wide. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

972
13/16" Poplar Lumber
155 Board feet, 10'6" long, 6-9" wide. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

973
15/16" Red Oak Lumber
294 Board feet, 4-12" wide, 12'6" long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

974
15/16" Hard Maple Lumber
125 Board feet, 3-9" wide, 6'6" long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

975
15/16" Hickory Lumber
181 Board feet, 4-8" wide, 6' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

976
15/16" Red Oak Lumber
374 Board feet, 5-10" wide, 8' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

977
15/16" Hard Maple Lumber
1104 Board feet, 4-10" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

978
15/16" Hard Maple Lumber
922 Board feet, 5-9" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

979
15/16" Red Oak Lumber
264 Board feet, 3 1/2"-9" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

980
15/16" Hard Maple Lumber
660 Board feet, 4-12" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

981
15/16" Red Oak Lumber
292 Board feet, 6-9" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

982
4/4" Red Oak Lumber
469 Board feet, 5 1/2"-10 1/2" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

983
15/16" Hickory Lumber
481 Board feet, 5-11 1/2" wide, 10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

10000

984
8/4" Hard Maple Lumber
411 Board feet, 6-16" wide, 8-10'6" long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

985
15/16" Red Oak Lumber
501 Board feet, 4-12" wide, 8-10'6'' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

986
15/16" Hard Maple Lumber
339 Board feet, 5-12" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

987
15/16" Hard Maple Lumber
963 Board feet, 5-10" wide, 8-10' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

988
1 7/16" Hard Maple Lumber
313 Board feet, 6-14" wide, 8-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.

989
15/16" Hard Maple Lumber
965 Board feet, 4-14" wide, 10-12' long. Located at 501 S Miller Dr, White Pigeon, MI, 49099. Call Tim with any questions at 269-986-5693.