00

Information Lot
Online and phone bidding only. This equipment is located at various locations, please note address and phone numbers in every description. Buyers have 14 days to remove equipment unless noted otherwise in description. 

101

Heavy Equipment Key Set 24 Keys
Heavy Equipment Key Set 24 Keys. Kit includes keys for John Deere, Toyota, Yanmar, Hyster, CAT, Lull, Volvo, Case, Skytrack, Bobcat, Hybrid, Massey Ferguson, Snorkel, JLG, Upright, New Holland, Skyjack, Genie, Snorkel and many more.

102

Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

103

Accucut 2-Blade Edger
1 moveable blade, Does not include John Deere power unit, 16" blades, 4''X32" width capacity, 4'x80" infeed table, 32" belt feed through edger, 4'x10' flip-table outfeed with air cylinder, Has laser light, Includes 16" blower mounted on top of edger. NEW IN 2019 second OWNER! Located at 355 Archie Fryer Road, Munfordville, KY 42765. 14 days for removal. Call Eugene 260.350.8953. 1st lot of an entirety.

103A

Edger Blades
4 16" Split blades. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

104

John Deer Power-Tech 4.5L Power Unit
80 hp, w-clutch SN-T04045D813585, Model-4045DF150B, Meter reads 1801 hours. Very good unit! Located at 355 Archie Fryer Road, Munfordville, KY 42765. 14 days for removal. Call Eugene 260.350.8953.

104A

Accucut Entirety Lot # 103-104
With 10% raise

105

Belt Conveyor
3'x21', 30" belt, 4" sides, Adjustable legs on one end, Hydraulic drive, Heavy duty custom shop built. Located at 355 Archie Fryer Road, Munfordville, KY 42765. 14 days for removal. Call Eugene 260.350.8953.

106

Landing Table
30"x70"x 32" tall. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

107

18" Blower
Honda GX270 motor, In good condition, 6" infeed and outfeed pipe. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

108

Dust Pipe
Includes all flex-hose and PVC pipe to and from both blowers in building, Approximately 14' of flex hose and 100' of 6" PVC pipe. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

109

Lumber Cart
40"x7', Heavy duty. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

110

Lumber Cart
40"x7', Heavy duty. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

111

Lumber Cart
40"x7', Heavy duty. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

112

Lumber Cart
40"x7', Heavy duty. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

113

Lumber Cart
40"x7', Heavy duty. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

114

Lumber Cart
40"x7', Heavy duty. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

115

Lumber Cart
44"x80"x40" tall. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

116

Rough Cut Cedar Slabs
9'-10' long, 1 1/2"x20" wide, 13 total. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

117

Dry Kiln
8'x20'x87" inside height, Outside 112'' to the peak, Includes 3 38"x65" solar panels that power the fans inside kiln, Does not include battery pack for solar panels, 2 5'x8' swinging doors, 1 3' man door, 4 fans for circulation, Very nice little dry kiln. Located at 355 Archie Fryer Road, Munfordville, KY 42765. 14 days for removal. Call Eugene 260.350.8953.

118

Banding Tools
3 strapping tools, 2 crimpers. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

119

Steel Banding
3/4", 4 full rolls, Includes 2 full boxes of steel banding seals. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

120

Poly Banding
5/8", 7 full rolls. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

121

Lumber Cart Wheels
4 -10x2.5 wheels, 10-6x2 wheels. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

123

Woodmaster Planer/Molder
Model-W-725, SN-W1-9264, 40"x4'x4' tall overall, 2 Milwaukee routers, Does not include Honda motor, Includes Pallet with different cutting/molding/sanding heads, parts, manuals, and adjusting tools, Very good working machine with only 19 hours. Located at 355 Archie Fryer Road, Munfordville, KY 42765. 14 days for removal.Call Eugene 260.350.8953.

123A

Honda GX630 Motor
Meter reads 19 hours, includes the battery & slide mount, Very good condition. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

123B

18" Blower
No drive, Includes 10' 6 1/2" PVC pipe and all flex hose from planer to blower, 7" infeed/outfeed pipe size. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

124

Concrete Blocks
2'x6'x2' tall, stackable, 7 total. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

125

Self Dumping 2 yd Hopper
58"x6"x45" tall. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

126

Viking Champion 304 Automatic Pallet Nailer and Stacker
Air/Hydraulic/24V, nail bowl is 110V, could be converted to a coil nailer, 60" x 60" pallet capacity, 4 nailers, includes extra parts, everything works good. Located at 680 Springs Rd, Springs , PA 15562. Call Jonathon 574.349.4380. Removal 14 days. 1st lot of an entirety.

127

5 Cylinder Deutz Diesel Unit w/ Clutch
24V alternator, 15 HP Quincy air compressor, 2 hydraulic pumps, hydraulic oil reservoir, recently replaced head gaskets and seals, uses no oil, good working condition. Was used to operate Viking nailer. Located at 680 Springs Rd, Springs , PA 15562. Call Jonathon 574.349.4380. Removal 14 days.

128

Viking Entirety Lot # 126 & 127
With 10% raise

129

Self Dumping Hopper
6 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232. Removal 14 days. Shipping is available.

130

Self Dumping Hopper
5 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232. Removal 14 days. Shipping is available.

131

Self Dumping Hopper
4 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232. Removal 14 days. Shipping is available.

132

Self Dumping Hopper
3 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232. Removal 14 days. Shipping is available.

133

Self Dumping Hopper
2 1/2 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232. Removal 14 days. Shipping is available.

134

Self Dumping Hopper
2 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232. Removal 14 days. Shipping is available.

135

Self Dumping Hopper
1 1/2 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232. Removal 14 days. Shipping is available.

136

Self Dumping Hopper
1 yard. Located at 5195 Kinsman Rd. Middlefield, OH 44062. Call Daniel at 440.693.4232. Removal 14 days. Shipping is available.

137

Baker 3 Head Resaw w/ Return
Model BBR-O, serial # 97-2103, 20 HP electric motors on heads, 3/4" x 28" bandwheels, bandwheels on center head need recrowned, includes hydraulic pack, 6" wide x 12" cant capacity, good condition, gas engines will be removed and electric reinstalled. Located at 529 Woleber Rd. Myerstown, PA 17067. Call Jonathon 574.349.4380

138

Kubota Model 1902 Power Unit
38 HP. Low hours. With control panel. Runs nice. Located at 11751 CR 12, Middlebury IN 46540. Removal 2 weeks. Call Darrin 574.536.1646. This lot is subject to 7% sales tax unless buyer has a valid exemption.

139

John Deere Model 4045T Power Unit
110 HP. Was rebuilt by the military in 2009. Unused condition. I took off the head and pan to check for rust, etc. Everything looks brand new! New clutch - WPT 10". Murphy shutdown controls. This engine is as near to new as you will find one! Located at 11751 CR 12, Middlebury IN 46540. Removal 2 weeks. Call Darrin 574.536.1646. This lot is subject to 7% sales tax unless buyer has a valid exemption.

140

John Deere Model 6404T Power Unit.
140 HP. Approx 2500 hours. Good strong runner. New clutch - WPT 11 1/2" Pilotless. Murphy shutdown controls. Located at 11751 CR 12, Middlebury IN 46540. Removal 2 weeks. Call Darrin 574.536.1646. This lot is subject to 7% sales tax unless buyer has a valid exemption.

141

COT Grade Run-around System
Complete run-around with all controls, all electric. Has been sitting for a few years. Located at 19899 Coon Rd. Spartansburg PA 16434. Call Jonathon 574.349.4380  

142

Overhead Crane System
2 bridges, no support posts, 5 ton capacity. Located at 19899 Coon Rd. Spartansburg PA 16434. Call Jonathon 574.349.4380  

144

Rollcase
Hydraulic chain drive, 30"x14', 5 1/2"x18" rolls, varied spacing, 4 spiral rolls, 2 regular rolls, 6' incline belt conveyor on end with 16" belt. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

145

Frick Gang Edger
18" split blades-8 total, 6'x14'6" overall, 4'x9' rollcase infeed with hydraulic drive, 50"x128" belt outfeed with electric drive and 42" belt, Belt has some tearing, 38" width. capacity, Manual blade shift, Does not include power unit, Has laser light NO LASER INCLUDED, Set up for 3 blade edger without gang saw blades. 1st lot of an entirety. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

145A

Ford 7.3 Powerstroke Unit with Air Compressor
260 hp, Hours unknown, Runs good, No clutch, Like new 10 KW generator included, Hydraulic tank, Ingersoll Rand Type 30 air compressor. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

145B

Entirety of lots 145 and 145A
With 10% raise

146

Jaskson Wood-Shaving Mill
Includes hyd. unit w-Hydraulic Setworks,26''X61'' feed box. overall dimensions - 5'x16'x7' tall, SN-13086-03010-12-81, Lineshaft ready, No drive. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

147

ASM Hydraulic Unit
No electric motor or hydraulic pumps, 3'x6'x3' tall tank, 102"x126"x90" tall overall. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

148

Skate Rolls
4 sections: 2'x10', 1 1/2"x21 1/2" rolls, 3" roll spacing. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

149

Char-Lynn 10,000 Series Hydraulic Motor
Model-119-1030-003, Low speed high torque. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

150

Char-Lynn 10,000 Series Hydraulic Motor
Model-119-1030-003, Low speed high torque. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

151

Char-Lynn 10,000 Series Hydraulic Motor
Model-119-1030-003, Low speed high torque. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

152

Hydraulic Cylinder
SN-SANSTT-4x72-N-2.5, 80" long, Heavy duty. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

153

Eaton Air Cylinder
2' long, Model-R5TT-8x10-13-8-1.75, Heavy duty. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

154

Eaton Air Cylinder
2' long, Model-R5TT-8x10-13-8-1.75, Heavy duty. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

155

Eaton Air Cylinder
2' long, Model-R5TT-8x10-13-8-1.75, Heavy duty. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

156

Eaton Air Cylinder
2' long, Model-R5TT-8x10-13-8-1.75, Heavy duty. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

157

Air Compressor
Model-A264-12/63, SN-471720, 15 hp, 100 gallon horizontal tank. Located at 1842 RT 96A Ovid, NY 14521. Call Eugene 260-350-8953

159

Norwood 2 Blade Edger
10" split blades, No drive included, 20" capacity, 3'x12' overall, Hand set blade adjust, Very good condition. Located at 1842 RT 96A Ovid, NY 14521. Call Eugene 260-350-8953

160

West Plains Resaw with Return
Model-WPRS-EBS, SN-103, Hand pump hydraulics to raise and lower head, 7/8"x29" band wheels, 1 1/4" bands, Air band tension, Band wheels recrowned 3/22, 6"x88" belt feed, 20"x54" skate roll return, Includes hydraulic and electric drive for head. Located at 1842 RT 96A Ovid, NY 14521. Call Eugene 260-350-8953

200

2000 Mack Dump Truck Located in AL
Title is available and will be sent to buyer BUT TITLE IS NOT IN THE SELLER'S NAME AND THE BUYER MAY HAVE DIFFICULTY  TRANSFERRING IT. TITLE TRANSFER IS COMPLETELY BUYER'S RESPONSIBILITY AND THERE ARE NO GUARANTEES. CONSIDER IT TO HAVE NO TITLE IF YOU FEEL MORE COMFORTABLE THAT WAY. SEE PICTURES OF TITLE. Year: 2000 Make: Mack Model: DM690S Vehicle Type: Truck Mileage: Meter shows 7537  Engine Type: L6, 12.0L (728 CID) Fuel Type: Diesel Horsepower: 275HP VIN #: 1M2B221C7YM027249 Features and Notes:L6 275 hp Mack Diesel Engine,Triple Axle, Meter shows 7537 miles, New Batteries, New ignition Switch & Keys, Steel Dump Body, Roll Tarp ( tarp is torn )., Drive shaft was removed for towing purposes, Runs Good! Located at 272 Highway 95 Eufaula, AL 36027. Call Myron 574.229.4341

201

2000 Rough Terrain SkyJack Scissor
Model SJ9250 RT Ser# 50871 Dual Fuel System (Propane & Gasoline) 4 Cylinder Engine, Meter Shows 3400 hrs, Includes User Manuals, Last ran April 2021, had $3469 worth of work done to it. Still needs a good amount of work done on it. Not in Running Condition! Receipts are in photos. Located at  1160 Tidwell Rd Alpharetta, GA 30004. Contact Loren Beachy 574-238-5292 Dimensions SJ9250 RT A Work Height 56’ (17.07 m) B Raised Platform Height 50’ (15.24 m) C Lowered Platform Height 79” (2.01 m) D Overall Width 92” (2.34 m) E Overall Length 176” (4.47 m) F Stowed Height (Rails Up) 124.5” (3.17 m) G Stowed Height (Rails Down) 90” (2.29 m) H Platform Width (Inside Dimension) 74” (1.88 m) I Platform Length (Inside Dimension) 168” (4.27 m) Specifications SJ9250 RT Extension Deck 5’ (1.52 m) Ground Clearance 8” (0.20 m) Wheelbase 119” (3.02 m) Weight 15,200 lbs (6,895 kg) Gradeability 30% Turning Radius (Inside) 210” (5.33 m) Turning Radius (Outside) 301” (7.65 m) Lift Time (With Rated Load) 67 sec Lower time (With Rated Load) 72 sec Drive Speed (Stowed) 2 mph (3.2 km/h) Drive Speed (Raised) 0.6 mph (1 km/h) Maximum Drive Height 30’ (9.14 m) Capacity (Overall) 1,500 lbs (680 kg) Local Floor Load (With Rated Load) 146 psi (1006 kPa) Overall Floor Load (With Rated Load) 204 psf (10 kPa) Maximum # of Persons 5 Tire Type Air Filled Tire Size 10 x 16.5 Model Capacity With 1 Extension Deck* Capacity With 2 Extension Decks* Main Front Ext. Main Front Ext. Rear Ext. SJ9250 RT 1,000 lbs (454 kg) 500 lbs (227 kg) 500 lbs (227 kg) 500 lbs (227 kg) 500 lbs (227 kg)

202

1989 CAT I28B Wheel Loader
PIN-1HFO1502, Engine SN-45V85405, CAT diesel, Machine weight 28,600 lb., Meter reads 4117 hours,  Needs new seat, Does not include any attachments, quick attach, Has 3rd valve, no major leaks. Comes with seal repair kit. Good working machine. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Need to reserve this loader for 14 days to loadout Call Eugene 260.350.8953.

203

Wheel Loader Grapple Forks
4' forks, 5' wide, Quick attach. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

204

Wheel Loader Bucket
8' wide, Quick attach. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

205

1989 Skytrack 5522 Telehandler
Meter reads 9500 hours, Perkins diesel, 3-way steering, foam filled tires, self leveling forks don't work, rotating forks, has attachment to convert to skid steer attachments, no brakes, has some minor leaks on cylinders but does not affect the performance of the machine, 2 speed hydro drive. new liners on pistons and new oil pump 600 hours ago. New alternator. Good strong machine, good condition. Located at 780 Kutztown Rd. Myerstown, PA 17067. Call Jonathon at 574.349.4380.

206

John Deere 550B Dozer
Serial # T0550AC706489, hours unknown, 6-way blade, drive sprockets and chain are very good, pads @ 50%, has winch but does not work, runs and operates. Located at 1734 CR 1125 East, Cisne, IL 62823. Call Jonathon 574.349.4380. Removal 14 days.

206A

International 500 Series C Dozer
6 way blade, torque converter, diesel engine, tracks need attention, runs good. Located at 7567 Hardscrabble Rd. Addison, NY 14801. Call Myron 574.229.4341

208

2019 Baker Portable Bandmill
VIN- 1E9B52025JK495155, Model-BBS-03665D, SN-18-940, ST225/75R15 tires, Was bought new from factory in 2019 and always stored inside. 36''X20' capacity, setworks, 65 hp Cummins engine, 2 5/16" hitch, 4'x28'x8' tall overall, 2" bands, 28"x1 1/2" band wheels, Meter reads 3644 hours, Includes log loading arms and debarker attachment, (not installed) Upgraded heavy duty outfeed rolls, upgraded guide rollers, trailer lights and electric brakes. Ready to go down the road. Very good working machine!. Located at 355 Archie Fryer Road, Munfordville, KY 42765. 14 days for removal. Call Eugene 260.350.8953.

208B

Timber Harvester Portable Mill with Echo Head
Echo head rebuilt 4/21, 51 hp CAT diesel engine, Has axle and tires but need to be mounted, Meter reads 1761 hours, 40"x26' overall, Brand new Echo Machined, band wheels 3/22, Hydraulic cylinder for log loading arm, Model-36HT25, SN-TH06061121, 1 1/2"x25" band wheels, 2" bands. NICE MILL!  Located at 1842 RT 96A Ovid, NY 14521. Call Eugene 260-350-8953

208C

2002 Baker Portable Bandmill
Model-BBS-0, SN-02-291, 2" ball hitch, 45 hp Kubota diesel engine, Meter reads 230 hours on engine, movable guide doesn't work, 1"x28" band wheels, 1 1/4"  UPDATE 1 1/2'' bands, Manual setowrks, 8'x33' overall, 4'x30' track, 24' length capacity, All hydraulic lines replaced in last 2 years, New roller guides and re-crowned band wheels 3/22, ST205/75D14 tires- 50% tread, Includes 15-20 used re sharpened bands, Good running machine. Located at 682 Latimer Hill Rd. Canajoharie, NY 13317. Call Eugene 260-350-8953

208D

LT 15 Woodmizer Sawmill
has 19 HP Kohler gas engine. The mill was purchased new 5 years ago and was not used very much. Includes box of new blades. Stationary sawmill does not have trailer package. Does have extension to cut 17' logs. Located in 45948 County Road West, Gaysmill, WI 54631. 30 days to remove. Contact Zach @ 931-224-0699.

209

Baker Band Saw Wheels
2 Band wheels, Spare wheels for Lot 208, just recrowned and ready for production.1 has a pulley mounted onto it, 28"x1 1/2". Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

209A

Pallet of Parts for Baker Bandsaw
Bearings, filters, seals, Brand new starter for Cummins motor, Sprockets, Jack-stand, Jack stand & 2 pins were removed and sell with mill (lot 208)  Exhaust tip. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

210

3 Strand Log Deck with Stop'N'Load
No drive runs off bandmill motor, 10'x17'6"x4' tall, 3' Stop'N'Load arms. Located at 355 Archie Fryer Road, Munfordville, KY 42765. Call Eugene 260.350.8953.

211

Cat R80 (sn: 49A01901) Fork lift
8,000 lb. capacity, Perkins Diesel engine, showing 13,338- side shift, mast overall width 80", 3.5' forks, 6.5" wide, air tires, front tires 10%, rear tires 60% 98" lowered mast height. Forklift was running when parked-owner going to get running before the auction. Call Zach 931-224-0699 to verify. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

212

Bantam Telekruser (sn: 455) Model S626 Crane
all terrain, 15 ton lift, 60' lift, 360 degree rotation, out riggers. Steering: straight, crab or parallel. Crane scales in working order, 453 Detroit engine that was recently rebuilt. Allison Transmission: Model TT2200-1 (sn: 23545) Part 683-3373. 12' height lowered. Overall 8' width and 32' long. Parts and Operators Manual included. Located at 11204 East Laurel Road, London, KY 40741 Call Zach 931.224.0699 with questions  

213

Prentice Knuckleboom
Prentice 410B Knuckleboom Loader, Detroit engine, New packings on cylinders, New Swivel, New Copper Radiator, New Calibers and lines on Brakes. Gone through completely Located at 223 Paw Paw, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669.

214

Buck Saw
18' Buck Saw Located at 223 Paw Paw, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669

215

Loader attachment
Loader attachment for John Deere 544 B/C type. Located at 223 Paw Paw, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669

216

Meadows #1 Portable Circle Mill
2 HB, 12' carriage, air dogs, hydraulic drive, includes hydraulic tank, 12 volt over hydraulic setworks, less than 300 hours on Pipers setworks, 52" blade, good working condition. Located at 7683 Wax Rd. Clarkson, KY 42726. Call Jonathon 574.349.4380

215A

Meadows #1 Deluxe 4 HB Carriage
15' carriage, has Frick setworks, dogs, 3- Lumbertiger headblocks, foot receder, includes track, frame and drive, (no feed) cant kicker at end of track, 50' of track, ready for production, fair condition. Located at 914 Straight Creek Rd. Waverly, OH 45690. Call Eugene 260.350.8953

217

Cummins 8.3 Power Unit w/Clutch
Approx. 5500 hours. Murphy controls, Holtec air compressor, 220 HP, good working condition. Was used to run lot # 216. Located at 7683 Wax Rd. Clarkson, KY 42726. Call Jonathon 574.349.4380

218

Ingersoll Rand RT708H All Terrain Forklift
Meter reads 6000 hours, 8000 lb. lift capacity, 22' reach, 7' adjustable forks, Cummins engine, good running condition. Located at 1795 S Dixie HWY Munfordville, KY. Call Eugene 260.350.8953. This lot is subject to 7% sales tax unless buyer has a valid exemption.

219

1997 Manitou K-D Hawk All Terrain Forklift
Model T604TC-D, serial # T6040204, 6000 lb. lift, 12/14' lift, forks spread to 8', 4WD, enclosed cab w/ heat, wipers, emergency brake, 3 cylinder diesel, all fluids and filters have been changed, repainted, new seat, meter reads 3000 hours, flashing lights, head lights, and reverse lights all work, shift and tilt pistons rebuilt. Truck weight 14,378 lb. Good working condition. Located at 414 Rt 94, Columbia, NJ 07832. Call Jonathon 574.349.4380

220

International 4500B Rough Terrain Forklift
Two stage, two wheel drive, Diesel engine, runs & operates good. Tires are in fair condition. located at: 1363 CR 460, Wayne City, IL, 62895  Call Eugene 260.350.8953  30 days for removal. 

220A

Clark GCX20E Forklift
Serial # GX230E-304-9870, meter reads 4707 hours, 3 stage mast, side shift, 37oo lb. lift capacity, park brake needs fixed, engine runs great but does not drive, issue unknown. Located at 153 Old River Rd. Salisbury, PA 15558. Call Jonathon 574.349.4380

221

Gregory H-800 Fork Lift
SN-101AF065, 8000 lb. capacity, Meter reads 3420 hours, 7' tall, Hydrostatic drive, 3 stage mast, 7' forks, Side shift and load leveling forks, New starter, Front wheel drive lock out, John Deere diesel engine, Rubber belting streel wheels. Air tires are available if the buyer wants them. Located at 1842 RT 96A Ovid, NY 14521. Call Eugene 260-350-8953

222

Teledyne Princeton Piggyback Impulse 3 Forklift
New starter and alternator, Model - D5000, SN-TP24550993, Rear tire has less than 20% tread, UPDATE: BRAND NEW RUBBER ON REAR WHEEL! Front tires have 75% tread, Air tires, 5000 lb. capacity, Meter reads 5552 hours, Hatts diesel engine, Hydrostatic drive, 3 wheel drive. Located at 1842 RT 96A Ovid, NY 14521. Call Eugene 260-350-8953

250

2003 Peerless Walking Floor Trailer, VIN # 1PLE045283PG52998
96" x 45', has good title, good working condition. Located at 7562 Morehead Rd. Flemingsburg, KY 41041. Call Jonathon @ 574.349.4380. Removal 14 days. This lot is subject to 7% sales tax unless buyer has a valid exemption.

251

2005 Wilkens Walking Floor Trailer, VIN # 1W92M45225S077093
96" x 45', has good title, good working condition. Located at 7562 Morehead Rd. Flemingsburg, KY 41041. Call Jonathon @ 574.349.4380. Removal 14 days. This lot is subject to 7% sales tax unless buyer has a valid exemption.

252

2004 ITI Walking Floor Trailer, VIN # 1Z92J48274T199034
Year: 2004 Make: Innovative Trailers Features and Notes: 102" x 48', has good title, good working condition. Located at 7562 Morehead Rd. Flemingsburg, KY 41041. Call Jonathon @ 574.349.4380. Removal 14 days. This lot is subject to 7% sales tax unless buyer has a valid exemption.

300

Spiral Roll Case
24" x 12', no drive. Located at 204 Raspberry Lane, Williamsburg, PA 16693. Call Jonathon 574-349-4380

301

C55B Rooftop Chain
79'. Located at 204 Raspberry Lane, Williamsburg, PA 16693. Call Jonathon 574-349-4380

302

2 Air Cylinders & Hydraulic Motor
Located at 204 Raspberry Lane, Williamsburg, PA 16693. Call Jonathon 574-349-4380

303

Conveyor
36" x 20', with 28" steel legs, electric drive. Located at 204 Raspberry Lane, Williamsburg, PA 16693. Call Jonathon 574-349-4380

304

Mellott 5 Strand Transfer Deck
10'x10' w/hyd. drive. The deck is split in center so it's ready to load. Located at 204 Raspberry Lane, Williamsburg, PA 16693. Call Jonathon 574-349-4380

305

Morgan Single Head Resaw w/ Return
Wheels need recrowned, line shaft ready, lots of extra blades. Shipping available anywhere in the lower 48. Located at 1734 CR 1125 East, Cisne, IL 62823. Call Jonathon 574.349.4380. Removal 14 days.

306

John Deere 6068 Power Tec Diesel
Model 6068TF150D, 0 hours since rebuild, includes muffler, air cleaner, and radiator. Shipping available anywhere in the lower 48. Located at 1734 CR 1125 East, Cisne, IL 62823. Call Jonathon 574.349.4380. Removal 14 days.

307

4 Cylinder Kubota Power Unit
40 HP, Murphy controls, low hours since rebuild, runs good. Shipping available anywhere in the lower 48. Located at 1734 CR 1125 East, Cisne, IL 62823. Call Jonathon 574.349.4380. Removal 14 days.

308

4 Cylinder Izusu Power Unit
28 HP, no starter, runs but has no power, sells as is. Shipping available anywhere in the lower 48. Located at 1734 CR 1125 East, Cisne, IL 62823. Call Jonathon 574.349.4380. Removal 14 days.

309

Fuel Tank
4'x6'x50" tall. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

310

Fuel Tank
4'x6'x54" tall. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

311

Fuel Tank
30"x7'x2' tall. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

312

6" Bench Grinder
110 plug in, Code Number-30-09TI. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

313

Lincoln Pro Cut 60 Plasma Cutter
SN-UI960415191. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

314

Predator 6500 Generator
4 110 plug ins, 1 220 plug in, Gas powered, 5500 running watts, 6500 peak watts. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

315

Tru-Lift Floor Jack
10 ton capacity, SN-4276. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

316

2 Boxes of Used Cutting Heads for Planer/Molder
Assorted sizes and head types. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

317

Exide Single Shift Battery Charger
120V, Single phase, Model-SSC-12-550Z, Made for charging 24V batteries. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

318

Hendey Machine Co. Milling Machine
Electric drive, Condition unknown, Hand set controls, 3'x80"x6'. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

319

Lincoln Electric LN-Wire Feeder
50/60 Hertz, 2 Amps, 115V, SN-184628. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

320

Thermal Arc Pak 5XR Plasma Cutting System
60V, 20 Amp, SN- Y71835A183203B. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

321

Miller SRH-333 Arc Welder
SN-HK268451. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

322

Lincoln Arc Welder
60 Hertz, 230/460V, 76/38 Amp, Model-DC-400, SN-AC-553373. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

323

Metal Brake
Condition Unknown, Air powered, Hand controls, 2'x54"x5'. Located at 5191 E ST RD 236, Rockville, IN 47872. Call Eugene 260.350.8953

325

2004 Cleerman 20' 4 Head Block 38" Lineal Position Carriage
includes 60' track, track 50" center, Silva Tech setworks, Cleereman 6x4 air conditioned sawyers cab, all controls inside the cab less the stick lever for carriage drive. Includes the hydraulic pack and all hoses to carriage.  They cut Cypress on this carriage, therefore the front looks so black.  Cypress sap eats the paint.  Bought new in 2004 and stopped sawing in 2014.  10 YEARS RUNNING!  1st lot of an entirety. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699 Contact Paul Ackinson @ 336-465-8370 for you rigging needs at Pamplico and Johnsonville locations.

326

Saw husk
with belted off bearer belt. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699

327

Lincoln 250 HP Electric Motor
1775 RPM, Frame 445T, 460 volt. No motor controls Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699

328

60" -P Style inserted tooth saw
on mandle: Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699

329

Tyrone Berry SMA-250C Shot Gun Feed works
(sn: 5023-6) includes 100 HP electric motor, controller in saw cab. No motor controls. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699

330

Cleereman Tie back of lots 225-229 with 10% raise
Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699

331

Frick 10" Double Arbor Gang Saw (sn: 115)
36" opening includes 15' shifting infeed with 10" ladder back chain, (2) 300 HP, 1775 RPM electric motors, control box, saws, spacers, and spare shaft. No motor controls. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

332

16' Drop Saw Trimmer
will pass 25' boards, (7) 15 HP individually driven saws, air operated, includes motor control panel as marked and 25' block belt conveyor. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

333

10' x 11.5' transfer deck
with H78 chain, gear motor drive. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

334

Fulghum 60" 6 Knife chipper
horizontal feed top discharge. 1st lot of an entirety. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

335

150 HP 880 RPM electric motor
no motor controls. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

336

Fulghum 6x6' shaker screen (sn: FIR-799)
includes cyclone and pipe back to chipper transition. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

337

36" Chip Blower
wit 30 HP motor, dual load out shoot. No motor controls. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

338

Fulghum Tie Back of lots 334-337 with 10% raise
Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699

339

50' Fulghum Vibrating conveyor
18" bottom, 10" flared sides, 27" top includes fiberglass section and 10 HP drive. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

340

MDI Metal Detector
and control box. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

341

Weinig Model P22N Molder
Model No. 226-2388, mfg.: 1989, 5 head machine with controls attached. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

341A

Foley-United Grinder for Molder Heads
Model 75D9 (sn: 075480812)  Located at 3115 Big Swamp Road, Pamplico, SC 29583  30 days removal.  Contact Zach with questions.  931-224-0699

342

Misc. Size heads for Weinig Molder
Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699

343

Saw Cab
55"x48". Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

345

Pendu Model 4400 (sn: 8715)pallet board stacker
mfg. date 2-15-87. Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699

346

Pendu Model 4400 (sn: 7919R87) Pallet Board stacker
Located at 3115 Big Swamp Road, Pamplico, SC 29583. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

347

Ingersol Rand Pac-Air 125 Air Compressor
showing 29,000 hours.  125 HP motor.  Located at 3115 Big Swamp Road, Pamplico, SC 29583.  30 days removal.  Contract Zach with questions.  931-224-0699

349

Information Lot for Lots 350-452
This mill has been shut down for 10+ years under a building, within the last month, thieves have robbed copper wiring.  Study photos.  Keep this in mind when bidding.  Tried to take photos to show damage done.   Located at 1908 Lake City Hwy. Johnsonville, SC 29555.   Contact Zach @ 931-224-0699  30 days removal.  Equipment located in open span building.  Building is not available.    Contact Paul Ackinson @ 336-465-8370 for you rigging needs at Pamplico and Johnsonville locations. 

350

3 Strand Log Deck
15'x10' 3 arm stop & load, H78 chain, Lin-O-Power Drive, includes platform attached and steel support to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

351

18' Hourglass roll case
(7) 30" rolls, 3 arm log kicker, gear motor drive, No steel support. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

352

Fulghum Debarker and bark conveyor
Fulghum Model F120-HD (SN: F1-10079) debarker with 25 HP motor. 30' Drag chain type bark removal conveyor under the debarker, H78 chain, gear motor drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

352A

30' Concave Belt conveyor
with 24" belt, Belt condition @30%. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

353

5 Strand Log deck
17'x16' 5 strand log deck, 5 arm stop & loader, H78 chain, 4' space, steel support to the ground, metal plate, gear reduction drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

354

Bar Type Log Turner (sn: MK10)
includes 25 HP hydraulic power pack as marked, foot control valve, heavy duty tong dog, computerized saver setworks (sn: MK10) Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kitrell 931-224-0699 with questions

355

Corinth 3 Head Block Carriage
Corinth American Saw Mill Machinery Co. with 36" capacity. 15' carriage. Air over electric Lane setworks. Head block separation is 7' and 4'. Track width center to center is 54.5" .  60' track, 8x5.5' sawyers cab and all controls in cab to exclude log turner controls and carriage drive leveler. Cable sells with drive unit. Steel support to the ground. 1st lot of an entirety. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

356

Tyrone Berry SM225 Feed works
(sn: M1405) 75 HP electric motor includes control stick in sawyers cab. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

357

Tyrone Berry Cable Tightener
to include sheave. 5 hp Hydraulic pack. No cable. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

359

Corinth Tie Back Lots 355-357
With 10% raise, carriage, carriage drive, tightener.  Located at 1908 Lake City Hwy, Johnsonville, SC 29555.  30 days removal.  Contact Zach Kittrell @ 931-224-0699.

360

Laser light
Laser Blazer on saw cab  Located at 1908 Lake City Hwy. Johsonville, SC 29555  30 days removal.  Call Zach 931-224-0699

361

Salem 6' Band Mill
Right Hand, 11" face, 1" thickness, spoke top wheel, mechanical strain. Included 5' off bearer belt, gear motor drive Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

362

200 HP General Electric motor
449 T Frame, 875 RPM, no motor controls. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

363

(9) 9" Band Saw blades
for Salem. Length unknown, sliver back, are rusted due to elements. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

364

Thompson Band Saw guide mill
Model B (sn: 522) table guides and table included. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

365

15' Mellott Slab dump
28" belt  with 12' hydraulic operated cant pusher, steel support to 1 horizontal I beam. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

366

7.5 HP Hydraulic Power Pack
no motor controls. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

367

2 HP Hydraulic Power Pack
no motor controls. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

368

22' Roll case
(13) 24"x 6" rolls to include 7' 4 strand jump up chain (81X chain), air lift, 5 hp gear reduction drive, steel supports to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

369

Cornell 2 Saw Board Edger (sn: HE-650-27/80)
2 movable saws, 40 HP motor, includes 3 HP hydraulic pack, 10' infeed roll case with (5) 51"x6" gravity rolls, 17' single tailing belt, return conveyor with 17' 4 strands of roller type chain, and steel support to the ground. Laser Blazer laser lights. Cab mounted single blade hydraulic set vertical edger, 20 HP motor, No hydraulic supply, 22" saw blade, no steel supports. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

370

30' x 13.5' 4 strand cant deck
heavy duty, 104B chain, S drive construction, 5 HP gear reduction drive, steel support to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

371

9' Sherman Transfer deck
16' wide with H78A roof top chain, gear reduction drive and includes 16' jump up roll case, (9) 24"x6" rolls, Hydraulic drive. No hydraulic supply. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

372

12'x12' 5 strand transfer deck
with 81X chain, no drive shaft, is pulling off another transfer deck. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

373

Brewco B-1600 Grade Resaw system
to include resaw 40" wheels, 2" saw blade, 40 HP main motor, 12" infeed belt conveyor, complete infeed transfer system, roll cases, pop up chains, Brewco 5- way board separator outfeed system, 20 HP Hydraulic Pack, all motor panels. **Note: all copper has been sabotaged from control panel. Includes stairs, platform, steel supports at resaw system and Brewco B-1600 Grade Run around system. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

373A

Brewco Band Saw Swage
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

373B

Cat Claw Band saw sharpener
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

374

29' Belt conveyor
18" belt with dodge speed reducer drive, no motor control, No steel supports. ** Note: all copper has been removed. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

375

25'x12' Transfer deck
5 strand plated deck to resaw system with H78A chain, 6 arm cant stop, gear reduction drive. Steel support to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

376

10'x13.5' 4 strand landing deck
with 81X chain, gear motor drive, steel support to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

377

15'x6.5' 3 strand transfer deck
C55D roof top chain, gear motor drive, steel support to ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

378

9'x5' 2 strand transfer deck
with C55D chain, 3 arm stop, 5 HP gear reduction drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

379

Hydraulic stacking system
8' long, (4) 46"x6" rolls, 10 hp Teco Elec. & Mach. Co LTD, (sn: HY286284021) motor. Hydraulic supply with 8' outfeed roll case (50"x6"), gravity rolls. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

380

Standing Platform
40" x 189" x 17" with one step.  Located at 1908 Lake City Hwy. Johsonville, SC 29555 30 days removal.  Zach: 931-224-0699

381

4'x 12.5' 5 strand jump up transfer deck
with H78 chain, Dodge speed reducer drive, air cylinder lift support. Steel support to the 1st horizontal I beam. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

382

13'x12.5' 6 strand transfer deck
with 81X chain, gear motor drive, steel support to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

383

12'x12.5 6 strand transfer deck
with 81X chain to include a 6 strand 3' tipple unit, gear reduction drive, and steel supports to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

384

83'x 32" belt conveyor
belt @ 40%, gear reduction drive. Bolted together sides 11" straight sides. Support to ground as marked. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

385

20' roll case
with (7) spiral 24"x6" rolls (2) 24"x6" flat rolls, hydraulic drive, steel support to ground, no hydraulic support. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

386

15 HP Hydraulic Power Pack
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

387

6' 6 strand transfer deck
18' wide with 81X chain, gear reduction drive, steel supports to the 1st horizontal beam. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

388

30' roll case
(13) 24"x 8" rolls, gear reductions drive, steel supports to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

389

Trim Saw
trimmer will pass 20’ board, trim up to 8”, to include infeed table, 8stops, 7strand transfer deck, steel to ground, 22’ block conveyor with 18" bottom, 10" flared sides, gear motor drive. Conveyor is under trimmer. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

390

45' 3 strand green chain
heavy duty, lumber pull rolls, 130 roof top chain, 7.5 gear motor drive, I-Beams, stacking rack at end of chain, no motor controls, steel supports to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

391

Morbark Model 48" 6 knife chipper (sn: 721)
with horizontal feed top discharge. Disconnect at the 1st set of bolts. 1st lot of an entirety. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

392

100 HP Sterling Electric Motor
1760 RPM, Frame 405T. No motor controls. Belt stays with chipper. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

393

Fulghum 6x6 shaker screen (sn: F1R780)
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

394

Morbark cyclone
with pipe back to chipper at 1st set of bolts. Support to shaker screen. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

395

Morbark 24" chip blower
on swivel base includes approximate 10 hp motor. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

396

Morbark Tie Back on lots 391-395 with 10% raise
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

397

Newman G200 4 knife chipper knife grinder
(sn: 200-111) includes table and extra chipper knives. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

398

18' Chip conveyor
over sized with H78 drag chain, gear motor drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

399

50' chip conveyor
14" belt to blower, gear motor drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

400

35' Precision Vibrating conveyor
over all 35' including 5' fiberglass section and 5' screen section. 15 hp drive. 10" flared sides, 18" bottom, 27" top. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

401

30' Precision vibrating conveyor
with 18" bottom, 10" flared sides, 27" top includes 7 hp motor. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

402

22' Mellott vibrating conveyor
19" bottom, 4" flared sides, 22" top 10 hp drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

403

13'x18" belt conveyor
SKK gear motor drive next to the trimmer. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

404

60' belt conveyor
20" bottom, 5" sides, Rex gear reduction drive. Runs length of mill to chipper, vibrator feeding chipper. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

405

30'x14" belt conveyor
6" flared sides, 2 HP motor, gear motor drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

406

15' HMC dust removal chain conveyor
under band mill, 10" ladder back chain, 5 hp symco drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

407

40' chain type waste chain conveyor
, 10" ladder back chain, 8" deep sides, gear reduction drives. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

408

40' incline waste conveyor
10" ladder back chain, 8" deep sides, gear reduction drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

409

Approx. 48" blower
motor size unknown looks greater that 25 hp. Steel support to the ground and includes pipe in the building to cyclone. Pipe is 16" diameter) Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

410

48" cyclone
10' tall includes stand. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

411

Cat Walk, stairs and safety rails
around main mill. Not to include what is already sold at resaw system or at the Evans scragg system. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

412

Endwise Log trough
under construction to 22" log trough, chain, (5) I-beams, steel supports to the ground. 1st lot of an entirety. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

413

Log Cut off, no saw
blade includes guards, cylinder as marked on the ground, steel support to ground. Approx. 125 hp electric motor. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

414

55' Endwise log trough
heavy duty, support to the ground, no chain or drive. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

415

Tie Back of lots 412-414 with 10% raise
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

416

45' Mellott endwise log trough
with 10" ladder back chain, 4 arm hydraulically operated log kicker, hydraulic drive for trough, no hydraulic supply. Support to 1st horizontal beam. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

417

12' Sherman Sharp chain infeed (sn 58402A)
5 hydraulic operated log hold downs. Steel support to the 1st horizontal beam. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

418

Evans 2 saw sharp chain Scragg
hydraulically set, 40" saw blades, (2) 75 hp motors. 8' powered turner rolls infeed with old downs not installed but pictured. , 13' outfeed. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

419

Hydraulic Power Unit, 30 HP
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

420

15 HP hydraulic Power Pack, looks like a Mellott
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

421

45' waste conveyor
with H78 chain. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

422

20' outfeed roll case
(10) 24"x 8" rolls, no drive. 5' 4 strand pop up deck that has no chain or drive. Built for H78 chain. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

423

12' 4 strand transfer deck
with H78 chain, no drive, no steel support. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

424

43' roll case
(16) 24"x8" rolls, no drive, support steel to the ground. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

425

Cat Walk and support under Scragg area
as marked. Located at 1908 Lake City Hwy. Johnsville, SC 29555. 30 days removal. Contact Zach Kittrell with any questions. 931-224-0699.

426

Sullair Air compressor
75 HP, size 4 starter attached, showing 28,579 hours** Exact condition unknown, assume running when mill shut down. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

428

Kellogg American 25 HP Air compressor
Model KPS-25, (sn: 736636-787) showing 1930 hours. Assume that is not correct. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

427

10 HP tank mount air compressor
includes electrical as marked, starter and disconnect. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions,

430

Taian Electric 200 AC motor starter
, magnetic contractor, some damage due to copper thieves. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

431

Remainder of electrical
as marked behind band saw. Damage due to copper thieves. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

429

1000 gallon diesel tank
with electric pump. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

433

Personnel stand up heater mounted
on 2 wheel dolly. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

434

Fridge and contents- welding rods.
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

435

(4) log grapples
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

436

Electric Panel
as marked. Damage due to copper thieves. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

437

(2) 5 HP cut off saw attachment
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

432

Bolt Bin and contents
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

438

(2) pallets of misc. chain
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

439

Metal stand
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

440

Hanchett size A230 Right Hand Band Saw Sharpener
(sn: 1333), wood box as marked contains clamp and stands. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

441

Hanchett Stretcher
make and serial number unknown due to on pallet, ID plate down. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

442

Horizontal Reserve Air Tank
under transfer deck as marked. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

443

Vertical reserve air tank
at carriage. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

444

4x4' platform
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

445

(4) new sprockets for 10" ladder back chain
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

446

Roll of 10" ladder back change
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

447

Lot of sprockets, pulleys, and shims
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

449

Horizontal Reserve Air Tank
Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions

450

Misc. on ground next to debarker
includes misc. belting of various length and widths. Electrical boxes, and steel pipe. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

452

70'x11'7" Above Ground scales
poured concrete deck. Manufacturer and capacity unknown due to controls being stolen. Sold as is. Located at 1908 Lake City Hwy. Johnsonville, SC 29555. 30 days removal. Call Zach Kittrell 931-224-0699 with questions.

454

3 ton overhead bridge crane
located at 304 Bethel Ridge Road, Sharpsburg, KY 40374. 30 days removal. Contact Zach with any questions. 931-224-0699

455

Bridge Port Milling Machine
located at 304 Bethel Ridge Road, Sharpsburg, KY 40374. 30 days removal. Contact Zach with any questions. 931-224-0699

456

Toitt Industrial Blower Filter
located at 304 Bethel Ridge Road, Sharpsburg, KY 40374. 30 days removal. Contact Zach with any questions. 931-224-0699.

460

Pendu Slab Drop Belt
SN-13564-1, Hydraulic drive, 42"x12', 24" belt, Has 1 air cylinder needs second cylinder, Mac air valve. Located at 18989 160th St. Drakesville IA 52552. . Call Jonathon 574-349-4380

461

Bark Auger
3 sections of 16" auger, 1 13' section, 1 30' section, 1 11'8" section, No drive. Located at 18989 160th St. Drakesville IA 52552. . Call Jonathon 574-349-4380

462

Belt Conveyor
No drive, 10"x16'6", 4" belt. Located at 18989 160th St. Drakesville IA 52552. . Call Jonathon 574-349-4380

453

Allied Winch off John Deere 750 loader
located at 304 Bethel Ridge Road, Sharpsburg, KY 40374. 30 days removal. Contact Zach with any questions. 931-224-0699

463

4 Strand Unscrambler Deck
Electric drive, 7'x9', Moline C55D rooftop chain, Structural steel for legs included. Located at 18989 160th St. Drakesville IA 52552. . Call Jonathon 574-349-4380

464

Roll Case
Hydraulic drive, 40"x18', 6 1/2"x24" rolls, 24" roll spacing. Located at 18989 160th St. Drakesville IA 52552. . Call Jonathon 574-349-4380

465

Cant Tilt Turner
27"x14'6", Bearings on both ends. Located at 18989 160th St. Drakesville IA 52552. . Call Jonathon 574-349-4380

466

Steel Dust Pipe
Approximately 36' of 12" pipe. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

467

Pop Up Belt Conveyor
No drive or belt, Hydraulic cylinder for pop up, 26"x8', 25" max belt size. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

468

Stop'N'Load
3 arms, Split sprockets, 7' long, Hydraulic drive with Tulsa gearbox. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

469

Stop'N'Load
10'6" long, 4 arm, No sprockets. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

470

Pallet of Chain and Sprockets
Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

471

2 Strand Log Deck
No drive, 6'x27'. Located at 18989 160th St. Drakesville IA 52552.Call Jonathon 574-349-4380

472

HMC Hydraulic Tank
14"x3'x2' tall. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

473

2 Strand Transfer Deck
64"x22' overall, 16' incline section, 6' decline section, Hydraulic drive. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

474

Hydraulic Pack
2'x4'x16" tall, No hydraulic pump. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

475

Koger Air 42" Blower
No drive, Model-CCW-360, SN-KAF-7009, 16" inlet, 17"x20" outlet. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

476

Dependable Knife Grinder
SN-A2618, Model-832, 3 hp electric motor, 3'x6'x3' tall. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

477

Lumber Tarps
6 total tarps - 2 are brand new, 50'x80', Sunblocking tarps. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

478

Twin Disc Clutch
Model-SP314P1, BOM #-SP314P112, 3 15/16" shaft, Needs new disk and miscellaneous repairs. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

479

Twin Disc Clutch
Model-SP314P1, BOM #-SP314P112, 3 15/16" shaft, Needs new disk and miscellaneous repairs. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

480

Twin Disc Clutch
Model-SP314P1, BOM #-SP314P112, 3 15/16" shaft, Needs new disk and miscellaneous repairs. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

481

Twin Disc Clutch
Model-SP314P1, BOM #-SP314P112, 3 15/16" shaft, Needs new disk and miscellaneous repairs. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

482

Twin Disc Clutch
Model-SP314P1, BOM #-SP314P112, 3 15/16" shaft, Needs new disk and miscellaneous repairs. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

483

Twin Disc Clutch
Model-SP314P1, BOM #-SP314P112, 3 15/16" shaft, Needs new disk and miscellaneous repairs. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

484

Twin Disc Clutch
Model-SP314P1, BOM #-SP314P112, 3 15/16" shaft, Needs new disk and miscellaneous repairs. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

485

Twin Disc Clutch
Model-SP314P1, BOM #-SP314P112, 3 15/16" shaft, Needs new disk and miscellaneous repairs. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

486

McDonough Band Saw Head Rig
SN-84M117-FR, Weight strain, 33"x4' off bear belt with hydraulic drive, No drive for head, Lineal positioning cylinder, 11"x7' Band wheels, 1" mead on wheels, 2 10"x44' band saw blades. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

487

Rough Cut Walnut Slabs
28 total, Average size is 16"x64"x2" thick. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

488

3 Strand Log Deck with Stop'N'Load
Hydraulic drive, 11'x18', Includes structural steel to ground. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

489

HMC Rosserhead Debarker
Machine is very worn but still runs well, Bearings on Log turning wheels will need to be replaced soon, Hydraulic drive on cutting head, 4'x4'x7' cab with all controls, Air cylinder for log kickers, 88"x31' overall, Does not include any structural steel.Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

490

10 Groove pulley
28" diameter, 4 1/2" arbor. Located at 18989 160th St. Drakesville IA 52552. Call Jonathon 574-349-4380

491

Cyclone
7'x14' tall, Includes steel support structure and 13' of 21" galvanized pipe. Good working con. Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

492

44" Blower System
Electric drive, Includes steel support structure, 24"x28" inlet, 32" outlet. Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

493

Brewco Sizer
SN-SZ012036, Hydraulic drive on feed, 40 hp electric motor on head, Adjustable capacity, Was bought new and only used for a short period of time during a retooling project, Close to new condition. Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

494

5 HP Hydraulic Pack
Includes electrical panel, Was used for Brewco sizer. Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

495

Whirlwind Upcut Saw
Model-1000R, SN-S-3907815R, Manual board stops, No infeed or outfeed, 14" blade, Air cylinder for blade. Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

496

24" Honeyville Blower on Stand
Electric drive, built with "extra heavy AR steel" 11" inlet and outlet. This is the Honeyville elite! Extra heavy duty and in very good condition. Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

497

Visionary Chamfer
4'x15' overall, Electric drive on head and feed, Adjustable size capacity, Model-CH210, SN-0897012. Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

498

Series 20 GI New York Blower 30" Fan Blower
Electric drive, 12" inlet, 15"x18" outlet. Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

498A

Dust Pipe
Approx. 45' of 12'' galvanized dust pipe. Located at 5345 W 200 N Shipshewana IN Call Eugene 260.350.8953

499

12" Bark Auger
27" long, Electric drive. Good Unit.Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

500

Pallet Chief III Paller Nailer with Stacker
4 Stringer, 3 air guns, Electric drive, Includes stackers and 2 18"x10' long skate roll feeds,Electric drive and air cylinders on stacker, was working well when line was discontinued and nailer removed.  Includes box of extra parts and pallet of nails, 28 boxes of 2"x.099" coiled nails, 9,000/box. Located at 5345 W 200 N, Shipshewana IN 46565. Call Eugene 260-350-8953

501

Log Deck
Mellott Log deck Three strand Melott log deck 10 feet wide by 17 feet long with stop and load and Tulsa winch hydraulic Drive in good condition. Located at 308 Martinsville Loop, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669

502

Debarker
HMC flat track debarker 36 inch HMC flat track debarker with cab controls self-contained hydraulic unit electric drive on the rosser head, debarker is in good condition. Located at 308 Martinsville Loop, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669

503

roll case
Roll case with Transfer deck Roll case with transfer deck 24" x 32' with electric drive, with 6' transfer deck, electric drive and air pop-up. Located at 308 Martinsville Loop, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669

504

Mellott green chain
Mellott green chain Mellott green chain 10'x25' with C 55D chain, electric drive. Located at 308 Martinsville Loop, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669

505

Mellott Unscrambler
Mellott Unscrambler Mellott Unscrambler 10'x 12' long. 3 Strand Unscrambler. Located at 308 Martinsville Loop, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669

506

Trim saw
Trim saw Five blade trim saw potentially 7. 7" cutting capacity. In working condition. Located at 308 Martinsville Loop, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669.

507

Belt Conveyor
Belt conveyor 18"x17' with 5HP motor and Dodge speed reduction drive Located at 308 Martinsville Loop, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669.

508

Air compressor
25 HP Champion Tank Mount Air compressor with 100 Cutler Hammer Disconnnect Located at 223 Paw Paw, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669

509

Webster Vibrating Conveyor
20' Webster Vibrating conveyor with 12" bottom X 7" sides with 2 HP motor. Located at 223 Paw Paw, Stonesville, NC 27048 30 days removal. Call Zach with questions. 931-224-0669