Terms & Conditions

By accepting the terms and conditions of this auction you acknowledge you are entering into a legal and binding contract. You agree to abide by all terms and conditions and you acknowledge receipt of all explanations and information made available by Steffes Group, Inc., also referred to as Steffes Group or Company. 

Payment

When paying within the stated time and with our acceptable payment methods: 

• A 10% buyer’s premium with a maximum charge of $1,000 per item applies to items purchased on Timed Online Auctions.
• A 2% buyer’s premium with a maximum charge of $1,000 per item applies to items purchased on Live Webcast Auctions.

You agree to make payment for all online purchases in U.S. funds within 2 business days of receipt of invoice by one of the acceptable forms of payment unless approval of financing arrangements is made with Steffes Group. To issue a check by fax, simply write a check as you normally would and fax a copy to us. All NSF checks will be charged a $30 fee. Checks by mail are not an accepted form of payment. Any other form of payment, other than the listed acceptable payment methods are subject to an additional 3% buyer's fee on the full amount of the purchase. No items will be released until full payment clears our office.

Acceptable forms of payment:

• Bank Wire Transfer; please call for wire instructions to be emailed to you.
• Check delivered to our office that held the auction
• Check By Phone

West Fargo, Sioux Falls, Grand Forks 701-237-9173

Litchfield 320-693-9371

Mt. Pleasant, Ames 319-385-2000

• Check By Fax

West Fargo, Sioux Falls, Grand Forks 701-237-0976

Litchfield 320-693-9373

Mt. Pleasant, Ames 319-385-4709

Sales Tax

ALL APPROPRIATE STATE SALES TAX LAWS APPLY PER THE LOCATION OF POSSESSION AND SELLER TYPE OF THE PIECE OF EQUIPMENT.

Listed below is a link for the Streamlined Tax Exemption form that includes 24 participating states. States that do not participate in the streamlined form, but in which Steffes Group frequently transacts business are MO and IL. Please contact our office if you would like us to send you a form for one of these states. The link for the streamlined form includes the states of IA, MN, ND, NE, and SD, among others.

Streamlined Sales Tax Agreement Certificate of Exemption

If you have any questions concerning sales tax, please contact the appropriate state government agency for that location or contact our office. Minnesota requires sales tax to be charged on all online consignment auctions unless the buyer provides an exemption form. 

Titled vehicles

$35 document fee charged on all titled vehicle purchases. Titles will be sent via USPS certified mail ten business days following payment.

Per vehicle and sales tax laws, upon registration and licensing of any titled vehicle or trailer, any buyer’s premium paid is considered to be part of the sales price. Sales tax will be charged on the entire sales price (including the buyer’s premium). 

If you have any questions concerning sales tax on a piece of equipment, please contact the appropriate state government agency at the location of the item on auction. 

ND Sales Tax Terms for Canadian Customers

 Used Farm Equipment

The sale, at auction, of used farm machinery to a Canadian farmer for agricultural use is exempt from sales tax the same as a North Dakota Farmer.

The purchase, at auction, of used farm machinery by a Canadian farm equipment dealer (retailer) would be sales taxable unless:

• You complete an exemption certificate with a ND sales tax permit number
• The purchased goods are shipped by a 3rd party to you in Canada - in this case a delivery receipt must be provided to Steffes Group.

 New Farm Equipment

The sale, at auction, of new farm machinery to a Canadian farmer for agricultural use, or a Canadian farm equipment dealer (retailer) is taxable at the current state rate of 3% plus any local sales tax if applicable.  The law also provides that Canadians may apply for a refund of the tax paid when meeting certain requirements.  This form and conditions of use are available online at http://www.nd.gov/tax/salesand%20use/canrefund/. 

Agents for Sellers
Steffes Group, Inc. and its Employees act merely as agents for sellers. All auctions are with reserve unless specifically stated otherwise. Auctions are with undisclosed reserves unless advertised otherwise as "Absolute."  Auctioneers, at their discretion, may place a reserve bid on behalf of the seller. All final bids are subject to the seller's confirmation. Only the top bidder will be contacted as to the status of his/her bid. While the information we provide on item(s) is deemed correct, no warranties are expressed or implied as to any items being sold, and you agree to purchase and accept the item in an as-is condition. Information on items is obtained by us from the sellers and you hereby agree to hold harmless Steffes Group and our Employees for any errors or omissions regarding the item(s) being sold. This information includes but is not limited to year, model, machine or engine hours, physical condition, options, features and other data pertinent to the value of the item. All items are sold As-Is-Where-Is unless specific factory or seller issued warranties are listed in the item description.

Inspection

You acknowledge that you have the right and responsibility to inspect the item(s) personally, or to have a third party representative inspect the item(s) for you. That by bidding on an item you have agreed to accept that item in its present condition at its present location and with the description provided whether accurate or not. 

Auction Close

Timed-online auctions will begin to close on the date and time listed. Lots will remain open until no bids have been placed within the last 4 minutes. Timed-online auctions normally close at a rate of 3 lots every 2 minutes.  

Please note that some lots can be tied together and will be set to close simultaneously.  This will be indicated in those lots by a paper clip symbol.  Please hover your mouse over the symbol to see what lots are tied together. The paper clip symbol means that each lot tied will stay in extension until there are no more bids on any of the lots that are tied.

         Steffes Group reserves the right to close multiple lots per minute at its discretion. Upon your accepted bid of an item, that item shall immediately become your responsibility and be at your risk (whether you have paid for that item or not). You agree that Steffes Group, its employees, and its sellers are not responsible for lost, stolen or damaged items and will not reimburse or discount items for any type of loss. Buyers are responsible for any costs incurred to prepare your item(s) for transport and/or shipping. This includes, but is not necessarily limited to, the cost of any rigging, dis-assembly, special loading requirements, transport, packaging, insurance, and all other costs related to physical transfer of your item(s). You agree to remit payment and remove from the auction property any purchases within the stated time for the auction being conducted. You further understand and agree that failure to remove items in the stated time for the auction will subject you to moving and storage fees unless arrangements have been made with the seller. 

Buyer Default

When using our online auction services you are making a firm commitment to purchase said item(s) and are entering into a legal and binding contract. Bids may not be cancelled or retracted for any reason. 

Non-paying bidders or fraudulent bidding will subject you to legal recourse and possible criminal charges including any fraud and/or interstate commerce violations. 

Internet Risk

You acknowledge that the internet may be an unreliable and error-prone network. Steffes Group will not guarantee that bids placed online will always be transmitted to or received by the auctioneer in a timely fashion. You agree to hold Steffes Group, Inc. and its employees harmless for any interruptions in online bidding. At the sole discretion of the Company, the auction may be suspended, postponed, or cancelled if internet service is unstable or disrupts the online portion of any event that is simulcast as an Internet Auction. 

Further, the auctioneer has the sole discretion to accept or refuse any bid. Steffes Group retains the right, at our sole discretion, to add, delete, or change some or all of our online services and the terms and conditions governing their online auctions at any time without notice. 

Abandonment Policy

Steffes Group provides this Abandonment Policy to inform you of our policies and procedures regarding any purchased item(s)/property that has not been removed by a buyer in a timely manner. Upon winning the bid for an item(s), after paying for item(s) purchased, a buyer is obligated to remove the item(s) from the auction site within a timely manner. 

Steffes Group may deem a buyer's failure to claim and remove equipment within 60 days following the close of an auction as evidence of buyer's intention to abandon the property. In these instances, the Company may take action that is adverse to buyer's interest in the property, including, but not limited to steps to dispose of the property. 

Disposition of property may include a variety of approaches based upon the buyer's purchase price of the property as follows: 

1) For those items with a final selling price of $5,000 or less, the Company will determine the appropriate disposition approach which may include:

• Removing and disposing as the Company sees fit.
• Allowing seller to retain or scrap.
• Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses, storage costs, plus 20% administrative fee. 

2) For those items with a final selling price of greater than $5,000, Steffes Group may remove the item from the selling location and resolve as follows:

• The Company may reimburse the seller on the buyer's behalf for storage fees of $25 per day, with the total amount not to exceed $1,500.
• Sell the item(s), whereby the Company will remit the sales proceeds to the buyer, less selling and advertising expenses and storage costs, plus 20% administrative fee. 

If a buyer with the winning bid has not removed the purchased item(s) from selling location within 10 business days after the close of the auction, the buyer will be responsible for directly paying the seller any and all storage fees if levied by the seller. If levied by the seller, storage fees will be $25 per day beginning the 10th day after the close of the auction/winning bid.

Multi-Party Farm Equipment Auction

MASON CITY, IOWA

Auction will be held at the Cartersville Elevator lot, 1603 South Eisenhower Avenue, Mason City, IA. Just ¾ miles south of the North Iowa Events Center on Eisenhower Avenue

ALL ITEMS MUST BE AT THE MASON CITY LOT BY

THURSDAY, JULY 28TH!

Loadout times will be: 

Friday, August 12 from 8 AM - 4 PM

Saturday, August 13 from 8 AM - NOON

Monday, August 15 from 8 AM - 4 PM

Tuesday, August 16 from 8 AM - 4 PM

Wednesday, August 17 from 8 AM - 4 PM

NO LOADOUTS after Wednesday, August 17 without calling for an appointment.

4WD TRACTORS

2012 John Deere 9510R, 4,359 hrs., 4WD, powershift, premium cab, 5 hyd. w/case drain, (4) 1,378 lb. inner wheel weights., (4) 165 & (8) 450 lb. outer dual weights., (20) suitcase weights between rear fenders, CAT V drawbar, 1-1/4" underslung tow cable, diff. lock, 7" CommandArm touchscreen display, dual beam radar, AutoTrac ready, instructional seat, AM/FM, dual 800/70R38 tires, S/N 1RW9510RLCP004295

1989 John Deere 8760, 6,940 hrs., 4WD, 24 speed, CAH, AM/FM, hyd. adj. seat, 3 hyd., 1,000 lbs. rear wheel weights, 520/58R42 tires, S/N RW8760H001726

Case-IH 9380, 6,295 hrs., 520/80R42 triples (overhauled approx. 300 hrs. ago w/paperwork)

MFWD TRACTORS

2018 John Deere 8245R, 1,851 hrs., MFWD, ILS, IVT 50 KPH, GreenStar 4600 processor w/AutoTrac & Section Control activations, Premium CommandView III cab, leather Active Seat, 85cc + 35cc hyd., (5) hyd. w/power beyond, dual hyd. trailer brakes, diff. lock, CAT IV drawbar, Lg. 1000 PTO, 3 pt. w/quick hitch, AM/FM/CD, poly front fenders, full coverage rear fenders, electric mirrors, (2) 1,378 lb. inner rear wheel weights, (2) 450 lb. outer rear wheel weights, Sturd-E-Built front rock box w/(10) front weights, 420/85R34 fronts, 480/80R50 rear duals, S/N 1RW8245RKJD132199

2013 John Deere 6140D, 426 hrs., 9 speed w/LHR, CAH, 3 pt., 2 hyd., 540/1000 PTO, sells w/John Deere H310 loader, joystick control, foot throttle, quick attach bucket, 48” pallet forks, S/N 1P06140DADM050168

2012 John Deere 8335R, S/N 1RW8335RTCP065139

2011 New Holland T7.250, 2,303 hrs., MFWD, 18 speed, power shift w/LHR, CAH, suspended cab, 380/85R34 fronts, 480/80R46 rear duals, (10) front weights, 3 pt. w/quick hitch, 540/1000 PTO, diff. lock, 4 hyd., poly front fenders, autosteer w/WAAS enabled 352 receiver (can be OmniStar unlocked), instructional seat, foot throttle, S/N ZDBZ03476

Case International 2294, shows 1,050 hrs., MFWD, powershift, CAH, 2 hyd., 3 pt. w/quick hitch, 1000 PTO, 4 speed w/3 speed powershift, (8) front weights, 14.9-28 fronts, 18.4-38 rears, S/N 16287042

2004 John Deere 8320

1995 John Deere 8200

2WD TRACTORS

1989 John Deere 4455, 7,103 hrs., 2WD, quad range, 3 hyd., 3 pt. w/top link, diff. lock, 540/1000 PTO, CAH, aux. fuel tank, (12) front weights, 11.00-16 fronts, 18.4-38 rear 10-bolt duals, S/N RW4455H003845

1982 John Deere 4640, shows 607 hrs., hrs. are not actual (believed to be 10,607), 2WD, powershift, CAH, 3 hyd., 3 pt., no top link, Lg. 1000 PTO, AM/FM, front weight bracket, 14L-16.1 fronts, 18.4-42 rears, S/N 4640P020553RW

1979 International 186 Hydro, shows 5,332 hrs., 2WD, CAH, AM/FM, spring suspension seat, 2 hyd., 3 pt. less top link, 540/1000 PTO, rock box, front fenders, K&M cab step, side mount mirrors, rear wiper, 10.00-16 fronts, 18.4-38 rears, S/N 2690015U10722

1977 John Deere 4430, 8,577 hrs., 2WD, CAH, 3 pt., 540/1000 PTO, S/N 4430H064649R

1976 John Deere 4430, 6,935 hrs., 2WD, quad range, CAH, 2 hyd., power beyond, 3 pt. w/quick hitch, 540/1000 PTO, AM/FM, 7-pin power outlet, aux. fuel tank, (7) front weights, K&M cab step, side mount toolbox, 11.00-16 fronts, 18.4-38 rears, S/N 4430H047184R

1969 John Deere 4020, 3,584 hrs., diesel, Syncro, 2WD, WF, open station, rear fenders, side console, 2 hyd., 3pt. w/top link, 540/1000 PTO, 10.00-16 fronts, 18.4-38 rears, S/N T213R221472R (Unknown running condition)

1966 International 1206, 7,230 hrs., 2WD, WF, open station, flat top fenders, 2 hyd., mid-mount hyd. couplers, 3pt w/ top link, 1000 PTO, (1) front weight, (1) pair rear wheel weights, hammer strap, 10.00-16 fronts, 18.4-38 rears, S/N 9533

1966 John Deere 4020, 8,178 hrs., 2WD, Syncro, open station, 1 hyd., 3 pt. w/quick hitch, 540/1000 PTO, flat top fenders, sells w/John Deere 48 loader, 80" bucket, weld-on cutting edge, aux. hyd. control valve 10.00-16 fronts, 18.4-34 rears, S/N SNT211R135451R

1957 Allis Chalmers CA, 2WD, gas, Woods L306 belly mower, 3 speed transmission, 540 PTO, 72" deck, 9.5/9-24 rear tires, 4.00-15 front tires, S/N 44770 (Owner states radiator leaks)

1942 Allis Chalmers C, 2WD, gas, Woods L306 72" belly mower, 540 PTO, 3 speed transmission, hyd. lift, 8.3-24/8-24 rear tires, 4.00-15 front tires, S/N C7094 (hole in engine block)

Case 1570, shows 7,034 hrs., 2WD, CAH, AM/FM, 4 speed w/3 speed powershift, 2 hyd., 3 pt. w/quick hitch, 1000 PTO, (12) front weights, 14L-16.1 fronts, 20.8-38 rears, S/N 8810799

COMBINES

1998 New Holland TR98, shows 4,264 hrs., CAH, AM/FM, air ride seat, instructional seat, Ag Leader PF3000 yield monitoring system, grain loss monitor, AHC, auto reel speed, reel fore/aft, Terrain Tracer, variable speed feeder house, feeder house reverser, chopper, Vittetoe dual chaff spreader, Maurer grain tank ext., hyd. bubble up auger, 16’ unload auger, 30.5L-32 fronts, 14.9-24 rears, S/N 563327

1995 John Deere 9500, 3,487 eng./2,282 sep. hrs., CAH, AM/FM, DAM/DAS, Johnson’s feeder house dust diverter, Vittetoe chaff spreader, 17’ 5” unload auger, 30.5-32 fronts, 14.9-24 rears, S/N H09500X660714

1995 New Holland TR87, shows 3,741 hrs., CAH, AM/FM, air ride seat, auto reel speed, AHC, grain loss monitor, variable speed feeder house, feeder house reverser, chopper, 14’ unload auger, 24.5-32 fronts, 12.4-24 rears, S/N 556493

1995 John Deere 9500, 2,465 sep./3,643 eng. hrs., 17’ unload auger, DAM, DAS, dual range cyl., chopper, Cyclone hyd. chaff spreader, Johnson feeder house dust diverter, Mauer hopper ext., 30.5L-32 fronts, 14.9-24 rears, S/N HO9500X661059

John Deere 9660

International 1460, 4,800 hrs.

HEADS

2012 Drago N6TR chopping corn head, 6x30”, PTO drives, John Deere mounts, poly snouts, opposed knife rolls, self-adjusting deck plates, S/N 293212

2010 John Deere 608C StalkMaster,chopping corn head, 8x30”, poly snouts, hyd. adjust deck plates, opposed knife rolls,  single pt. hookups, (3) HHS wands, (6) poly faced stalk stompers, stubble lights, S/N 1H0608CCCA0735612

2010 John Deere 608C StalkMaster, chopping corn head, 8x30”, AHC, (3) sensors, hyd. deck plates, opposed knife rolls, single pt. hookup, S/N 1H0608CCPA0735668

2010 Case-IH 3208, corn head, 8x30", single pt. hookups, PTO drives, hyd. deck plates, poly snouts, opposed knife rolls, will fit mid-range or Legacy, S/N Y9S019721

Case-IH 1083, corn head, 8x30", standard hookups, poly snouts, opposed knife rolls, PTO drives, S/N JJC0073882

John Deere 643, corn head, 6x30", intermeshing knife rolls, chain shaft drives, S/N 567347

John Deere 843, corn head, 8x30", poly snouts, intermeshing rolls, S/N 240779H

New Holland 96C, corn head, 6x30”, poly snouts, intermeshing rolls, PTO shaft drive, S/N 656693

John Deere 643, high tin, non-oil bath, LL PTO, fluted rolls, ear savers, deflector shield, S/N 136624

Case-IH 1020, flex head, 20', hyd. fore/aft, standard hookups, poly reel tines, steel end dividers, S/N 000866

New Holland 973, flex head, 20’, Terrain Tracer, AHC, Crary 3” cutting system, Johnson rock guard, poly reel tines, hyd. reel lift, steel crop dividers, PTO shaft drive, S/N 556174

International 836, corn head, 6x30”

International 820, grain platform, 20’

Corn Reel, 6x30", hyd. driven, fits JD 40 series head and others

HEAD TRAILERS

Unverferth HT25, wagon type, 25', ext. tongue, rear hitch, 20.5x8.0-10 tires, S/N A40960180

Killbros, head trailer, 20', manual adjust bar, manual adjust saddles, 20.5X8.0-10 tires

Shop-Built Head Trailer, wagon type, 15', ext. tongue, wood top beam, rear hitch, 16” tires

Shop-Built Head Trailer, wagon type, 12' wood top beam, rear hitch, 15" tires

Shop-Built Head Trailer, 20’, wooden beam, 15” tires

PLANTERS & DRILL

John Deere 7000, MaxEmerge, planter, 12x30", 2 pt., front fold, ground-driven, hyd. folding markers, MaxEmerge row units, Precision Planting finger pickup units, Kinze bean meters, 1.6 bu. fiberglass boxes, fiberglass insecticide boxes, pin adjust row cleaners, spring down force, manual adjust closing wheels, Precision Planting 20/20 SeedSense monitor, 7.60-15 tires, S/N 613032A

White 8200, 12x30”, hyd. wing fold, hyd. flat fold markers, ground driven, Yetter pin adj. row cleaners, man. adj. closing wheels, 1.6 bu. poly seed boxes, poly insecticide boxes, corn plates, 9.5L-15 tires, S/N HL22200109

John Deere 1560, drill, 15', 10" spacing, 2 pt., ground-driven, dual rank, S.I. belt meters, hyd. fold markers, hyd. down pressure, 31x13.50-15 tires, S/N N01560X682093

TILLAGE EQUIPMENT

2013 Case-IH 870, ripper,22’, individual 22” cushioned disc, (11) shank at 24” ASR w/7” points, 17” closing disc, reel basket, single point depth, walking tandems w/16.5L-15 tires, S/N YCD061907

2010 Krause Dominator 4850-18, single pt. depth, 22” front blades 9” spacing, (11) shank ASR w/15” spacings, 7” pts., 24” rear individual blades, rolling basket, 14L-16.1 tires, 9.5L-15 tires, S/N 2910

2009 Sunflower 4411, disc, 18', pull-type, single pt. depth control, 21" individual cushion disc front, 9x24" ASR w/7" pts., 21" coned rear gang disc, Summers 3-bar coil tine harrow, 12.5L-15 tires, walking tandems, S/N 04411K199900

M&W 1165 Earthmaster, chisel plow, 12', rock flex disc, (5) shank ASR w/3" pts., 10.00-15 tires, S/N 001471

Bush Hog, chisel plow, 3 pt., 12’, spring mounted shanks, 3” twisted shovels, 15” gauge wheels

M&W SLR5, 3pt, 5 shank, 30” spacing, spring loaded coulters, ASR shanks, 20.5x8.0-10 gauge wheels, S/N 20035

Tebben DT5S-30, ripper, 5x30", 3 pt., ASR shanks, 2-1/2” straight pts., rear mounted FFC leveling attachment, 7.60-15 adjust gauge wheels, S/N 8-94-2144

Glencoe Soil Saver, disc chisel, 9-shank, 15" spacing, spring mounted front gang, rigid scrapers, spring mounted shanks, (5) 4" twisted shovels, (4) 2" straight shovels, S tine rear leveler bar, 11L-15 tires

Glencoe Soil Saver, disc chisel, 9-shank, 15" spacing, 3" twisted shovels, spring mounted shanks, spring mounted front gang, rigid scrapers, 11L-15 tires, S/N 152203

John Deere 512, disc ripper, 12’6”, 5 shank, 30” spacing, 7” pts., shank protectors, ASR shanks, cushion front and rear gangs, 11” spacing, 22” front blades, 21-1/2” rear blades, spring mounted scrapers front and rear, single pt. depth control, 11L-15 tires, walking tandems across, S/N N00512X010249

John Deere 915, (9) shank ASR w/5” pts., 3 pt., 9.5L-15 adjust gauge wheels, S/N N00915XO03469

John Deere 2100, inline ripper, 4x30”, 3 pt., ASR shanks, 2” straight pts., wear shins, spring mounted coulters, (2) 20.5/65-10 pin adjust gauge wheels, S/N 1A82100XCD0750105

New Holland ST770, disc ripper, 7x30”, hyd. wing fold, single mounted front discs measure 21”, ASR shanks, 10” winged pts., 9” coverboards, spring mounted leveler discs measure 17”, 425/65R22.5 tires, S/N JFH0029166

Case-IH 870, ripper, individual 22” cushioned disc, (11) shanks, 24” ASR w/7” pts., 17” closing disc, reel basket, single pt. depth, walking tandems w/16.5L-15 tires, S//N YCD061907

Glencoe Soil Saver, 7-shank, 3” twisted shovels, spring loaded shanks, spring loaded front gang, rigid scrapers, manual adjust hitch, 11L-15 tires

Case-IH 14, ripper w/caddy, (6) 30” ASR shanks, 7” pts., Buster Bar, 11L-15 tires, S/N 03625

Case International 14, ripper, 3 pt., 9-shank, 24” spacing, 2-1/2” pts., shank protectors, ASR shanks, 11L-15 tandem gauge wheels, S/N JAG0362532

International 720, moldboard plow, 5x20”, semi-mounted, spring mounted coulters, auto reset, 9.5L-15 tires, S/N U038238

International 720, moldboard plow, 5x18”, semi-mounted, auto reset shanks, spring mounted coulters, 9.5L-14 tail wheel, 9.5L-14 pin adjust gauge wheel, S/N U022912

McFarlane RD-4030-RB6, 30’, cushion front gang, rigid scrapers, chopper reels on rear, 3-bar spike tooth harrow, rolling basket, hyd. fold, hyd. adj. tongue, single point depth control, 12.5L-15 tandems on main, 11L-15 tandems on wings, S/N 16057

Krause 14, 24’, 8” spacing, hyd. fold, rigid scrapers front and rear, 3 bar coil tine harrow, 12.5L-15 mains, 11L-15 wings, S/N 1934

John Deere 230, disc, 21', 9" spacing, 22" front blades, 20" rear blades, spring mounted scrapers front & rear, hyd. fold, 11L-15 tandem tires, S/N 019475A

Allis Chalmers 2500, disc, 22'6", pull-type, 9" spacing, cushion gang, 21-1/2" front blades, 20" rear blades, rigid scrapers front and rear, hyd. fold, 11L-15 tandems on main, 11L-15 on wings

Allis Chalmers, disc 12’, 7” spacing, rigid scrapers front and rear, hyd. lift (less cyl.), rear hitch, 9.5L-15 tires

John Deere 330, disc 21’, 9” spacing, spring mounted scrapers front and rear, 20” front blades, 22” rear blades, hyd. fold, man. adjust hitch, 11L-15 tandems on main, 11L-15 on wings, S/N 014102A

John Deere 330, disc, 27’, 9” spacings, front & rear spring mounted scrapers, 12.5L-15 tires, S/N 014079A

John Deere 2210, field cultivator, 45-1/2', pull-type, level lift tongue, 200 lb. standards, 7-1/2" Perma-Loc sweeps, 6" spacing, single pt. depth adjust, 4-bar coil tine harrow, 11L-15 tires, walking tandems across, (2) 9.5L-15 pin adjust front gauge wheels, S/N N02210L010388

Wil-Rich 2500, field cultivator 28’, 4” spacing, 10” bolt-on sweeps, 4-bar coil tine harrow, hyd. fold, 11L-15 walking tandems on main, 9.5L-15 walking tandems on wings, S/N 12969

Krause 4608, row crop cultivator, 8x30”, 3pt., hyd. fold, 6.70-15 gauge wheels, S/N 1849

International 183, row crop cultivator, 6x30”, 3 pt.

Drag, 60’, 10-section, 8-bar, hyd. lift, manual fold, 235/75R15 tires

GRAIN CARTS & GRAVITY FLOW WAGONS

Brent 1080, grain cart, Lg. 1000 PTO, scale w/Digi-Star EZ 400 display, roll tarp, hyd. adjust spout, 35.5L-32 tires, S/N B23930144

EZ Trail 510, hyd. fold side auger, hyd. flow control door, adj. axle, 1000 PTO, 18.4-26 tires, S/N F61092

Demco 750, grain cart, 1000 PTO, Digi-Star scale, tarp, 14” corner auger, 30.5L-32 tires, S/N 40003

Kinze 800, grain cart, 1000 PTO, roll tarp, auger light, 30.5-32 tires

(2) Brent 644, gravity flow wagons

Brent 744, gravity flow wagon

Dakon 250, gravity flow, ladder front and rear, on running gear, 6 bolt hubs, 11L-15 tires

Dakon 280, gravity flow, front ladder, John Deere 1075 running gear, 8 bolt hubs, 16.5-16.1 tires

Unverferth GT-540, gravity flow, S/N B1698178

Parker 12530, gravity flow, Kewanee No. 47 running gear, front ladder, 6-bolt hubs, 12.5L-15 tires

Osage Big Bin, gravity flow, John Deere running gear, front ladder, 8-bolt hubs, 12.5L-16 tires, S/N W1075016901W

J&M, gravity flow, J&M running gear, front ladder, 6-bolt hubs, 12.5L-15 tires,

Triggs, gravity flow wagon, double door, ladder front and rear, center divider, dump light, rear warning lights, mounted on Triggs running gear, rear hitch, brakes, 8-bolt hubs, 16.5L-16.11 tires

Triggs, gravity flow wagon, double door, ladder front and rear, mounted on Triggs running gear, rear hitch, brakes, 8-bolt hubs, 16.5L-16.1 tires

(4) Wagon Tires, 16.5L-16.1 tire, 8-bolt rim

Killbros 350, gravity flow wagon, front and rear ladder, mounted on John Deere 1065A running gear (S/N 188498W), 6-bolt hubs, 12.5L-15 tires, Unverferth seed auger, 12’, manual raise, manual swing, hyd. driven, plastic flexible spout

(2) DMI, gravity flow wagons, center dump, rear hitch, rear lights, front ladder, brakes, 8-bolt hubs, 16.5L-16.1 tires

J&M Model 384-SD, front ladder, rear hitch, J & M running gear, 8-bolt hubs, 385/65R22.5 tires, S/N 28606

J&M Model 385-SD, front ladder, rear hitch, rear lights, J&M running gear, 8-bolt hubs, 385/65R22.5 tires, S/N 28607

J&M Model 350-20, front ladder, mounted on J&M running gear, rear hitch, 8-bolt hubs, 16.5L-16.1 tires, S/N 13562

J&M Model 350-20, front ladder, mounted on J&M running gear, rear hitch, 8-bolt hubs, 11R22.5 tires, S/N 24939

SKID STEERS & ATTACHMENTS

Case 1835B, 5,151 hrs., diesel, 60” bucket, weld-on cutting edge, manual quick-tach, O-ROPS, LED lights, aux. hyd. 10-16.5 tires, S/N 17165661

Clark Bobcat 371, shows 495 hrs., gas, 42" bucket, weld-on cutting edge, manual quick-tach, ROPS, foot controls, 14 hp. Kohler, electric start, 23x8.50-12 tires, S/N 4953-M-11128

Bobcat 753, 2,900 hrs., 60” bucket, weld-on cutting edge, manual quick-tach, O-ROPS, foot controls, aux. hyd., diesel, 10-16.5 tires, S/N 51271861

Bobcat 742B, 3,111 hrs., 60” bucket, weld-on cutting edge, man. quick-tach, O-ROPS, foot controls, aux. hyd. gas, 10-16.5 tires, S/N 509418647

Notch LP72S, material bucket, 72", skid steer mount, S/N 23993

Bobcat 709, skid steer mount backhoe, hyd. riggers, hyd. swing, quick-tach buckets, 12” tine bucket, 22” tine bucket, S/N A54M00356

Skid Steer Tracks, 13” cleated tracks, 1-1/2” steel cleats, off of JCB 260

Snow Pusher, shop-built, 7’6”, skid steer mount, hyd. tilt, spring reset

TELEHANDLER

2019 Manitou MLT 625-75, 2,487 hrs., MDS 84” bucket, weld-on edge, hyd. quick-tach, 5500 lbs. capacity, CAH, AM/FM, 2 speed, all wheel steer, 4WD, aux. hyd., rear hitch, Kubota 4 cyl. diesel engine, 300/75R18 tires, S/N MAN00000V01020569

BACKHOES

John Deere 410B, 1,797 hrs., 2WD, diesel, ROPS, 88” bucket, weld-on cutting edge, 24” rear tine bucket, 265/75R16 fronts, 18.4-24 rears, S/N 1647171

Bobcat 709, skid steer mount, hyd. riggers, hyd. swing, quick-tach buckets, 12” tine bucket, 22” tine bucket, S/N A54M00356

SEMI TRUCKS & TRAILERS

2014 International ProStar, 740,889 miles, tandem axle day cab, MaxxForce 12.4L, Eaton 10 speed, air ride cab, air suspension, single fuel tank, PW, PL, single exhaust, Hankook super singles, new 5th wheel, VIN 3HSDJSRJRXEN059795

2008 International ProStar, 426,953 miles, day cab, Cummins ISM, Eaton Fuller 10 speed, air susp., diff. lock, air slide 5th wheel, SS half fenders, 105 & 80 gal. alum. fuel tanks, air ride cab, dual air ride seats, single exhaust, engine brake, 12,000 lb. front axle, 40,000 lb. rear axles, A/C, PW, PL, cruise, AM/FM/CD, 185” WB, 11R22.5 tires, alum. outer wheels

2006 Freightliner Columbia, w/dry box, VIN 1FUJA6CK86PW20573

2001 Freightliner FLD 120, 759,323 miles, day cab, tandem axle, air ride suspension, Detroit Series 60, Eaton 10 speed, 180” WB, 12,000 lb. front axle, w/275/80R22.5 tires on aluminum wheels, (2) 20,000 lb. rear axles w/295/75R22.5 tires (new) on steel wheels, (2) 120 gal. alum. fuel tanks, diff. lock, air slide 5th wheel, engine brake, VIN 1FUJAHCG31LH70486

1999 Freightliner FLD120, day cab, 213,681 miles, (less than 100,000 miles on major engine work), tandem axle w/air lift self-steering pusher axle, Detroit series 60, Eaton Fuller 10 speed, 220” WB, air suspension, diff. lock, air ride driver’s seat, 285/75R24.5 tires, (12) aluminum wheels, VIN 1FUYDSEB3XPA06482

1992 Chevrolet C7000, 172,396 miles, single axle, 6.0L gas, 5&2 trans., air brakes, 196” WB, spring suspension, Dayton spoked wheels, single steel fuel tank, 14’x96”x52” steel grain body, 2x12 side extensions, wood floor, 3-piece end gate w/grain chute, single cyl. scissor hoist, air operated PTO, rear hitch, A/C, air ride driver seat, AM/FM/cassette, VIN 1GBM7H1P7NJ101064

1991 Ford L8000, 7.8L diesel, 5&2 trans., air brakes, single hoist, 10’ dump box

1976 Chevrolet C65, shows 26,301 miles, 366 gas motor w/5&2 trans., 9000 lb. front axle, 18,500 lb. rear axle, Mico brake lock, steel box 14'x8'x47" w/16” extensions, cargo doors & wooden tailgate, poly lined floor, Schwartz Low Pro single scissor hoist, 10.00-20 tires, VIN CCE666V123590

2016 Timpte Super Hopper, tandem axle w/front axle lift, 65,000 lb. GVWR, 42’x96”x66”, air ride suspension, Ag hoppers w/roller traps, manual tarp w/Hurricane straps, front & rear ladders, 11R22.5 tires on aluminum wheels, VIN 1TDH42227GB154012

2015 Timpte, grain hopper, tandem axle w/air lift tag DDS, 50’x72”x96”, air suspension, (2) ag hoppers w/1 speed roller traps, S/S F/R, F/R ladders, Thunder electric tarp, 11R22.5 tires, (10) aluminum wheels, VIN 1TDH50033FB146968

2012 Wilson Commander DWH-5000, 43’x96”x66”, Ag hoppers, single speed trap doors, air suspension, front & rear ladders, (2) rows of (5) led lights, S/S rear panel, Shurlok 4500 electric roll tarp w/Hurricane straps, 11R22.5 tires, (4) aluminum wheels, VIN 1W1SAF1A1CA259200

2001 Timpte, aluminum, grain hopper, 96”x66”x42’, roll tarp, tandem axle, (2) standard hoppers, single speed roller traps, spring suspension, front & rear ladders, 11R24.5 tires, steel wheels, VIN 1TDH422261B098801

1998 Jet, steel grain hopper, 42’, spring suspension, standard hopper, 11R24.5 tires

1992 Wilson PacesetterDWH-200, 41’x96”x66”, tandem axle, spring suspension, (2) standard hoppers w/2 speed manual openers, front & rear ladders, Roll-Rite electric roll tarp, 11R24.5 tires w/steel wheels, VIN 1W1MAF1D5NA215660

1970 Fruehauf EDT OMM, tanker, 38’, 8,200 gal. (baffles have been drilled out), spring suspension, fixed landing gear, 10.00-20 tires, S/N OMM50312

PICKUP TRUCKS

2014 Ford F350, 266,296 miles, crew cab, 4WD, dually, 7.3L Powerstroke diesel, automatic, AM/FM, heat, A/C, 9’ fiberglass service body, (6) compartments, ag hitch, 235/85R16 tires, VIN 1F1WW3F7XEC97081

2001 GMC Sierra 1500 HD, 239,091 miles, crew cab, 6.0L gas., auto, 4WD, SLE trim pkg., heat, A/C, AM/FM, power mirrors, power windows, power locks, power front seats, cruise, brake controller, driver sidestep bar, headache rack, receiver hitch, alloy wheels, w/Hiniker 8’ blade, hyd. lift, hyd. tilt, spring reset, hand-held controller, LT285/75R16 tires, VIN 1GTGK13U21F15879

TRAILERS

1995 DiamondD, 7’x20’, gooseneck, steel horse trailer, tack room (2) 4,880 lb. torsion axles w/electric brakes, 7.50-16 tires

2004 Maurer, utility trailer, 82”x16’, wood deck, 18”x68” sliding ramps, tandem axle, spring suspension, 7,000 lbs. axles, brakes on both axles, 2-5/16” ball hitch, winch, LT215/85R16 tires

2021 Sure-Trac, 82”x16’, wooden deck, w/2’ steel dove tail, ramps, stake pockets, 2-5/16” ball, (2) 3,500 lbs. spring axles w/electric brakes, 205/75R15 tires, VIN 5JW1U1829M1319699 (NEW)

Kiefer, deck over flatbed, tandem axle, gooseneck, folding ramps, 235/80R16

MOWERS

Woods BB84X Brush Bull Extreme, 7', 3 pt., 540 PTO, laminated tail wheel, S/N 1176885

Land Pride RCM3615 Plainsman II, 15', chain guards, 1000 PTO, S/N 1235730

SPRAYER

Top Air, pull-type, 1,000 gal. poly tank, hyd. fold 60’ boom, 3-section boom shutoffs, 2” fill port, single nozzle bodies on 20” spacing, hyd. driven Ace pump, Raven 440 controller, hand rinse tank, 18.4-26 tires

SPREADER

Case-IH 550, spreader, 540 PTO, hyd. rear gate, wood floor, T bar web, single beater, 10.00-20 tires, S/N 11908480009134

NURSE TANK

Patriot Pathfinder, nurse tank, 4-wheel steer, 1,600 gal. poly tank, 400 gal. poly tank, 1.5” plumbing, 3” fill, 540/65R24 tires, S/N 23618

HAY EQUIPMENT

OMC Owatanna 260, swather, hydrostatic drive, 6 cyl. Ford gas engine, 13.50-16.1 fronts, 6.70-15 rears, S/N 2542, Model 261 header, 12’ 6” cut, hyd. reel lift, S/N 2456

Rhino PT207, tedder, 540 PTO, man. adj. leveling, 16x6.50-18 tires, S/N 246731

New Holland 144, inverter, ground driven, man. adj. pickup, 5.00-15 tires, S/N 823317

Vermeer VR1428, wheel rake, 28’, 14-wheel, (2) kicker wheels, wind guards, hyd. fold, hyd. windrow adj., hyd. lift wheels, adj. hitch, 11L-15 tires, S/N VRA302H7D1002069

Sperry New Holland 451, sickle mower, 7', 540 PTO, 3 pt., S/N 347264

New Holland H7450 MowMax, mower conditioner, 13’ mower conditioner, sm. 1000 PTO, center pivot, pivot hitch drawbar, rubber rolls, 31X13.50-15 tires, S/N YBN088135

Vermeer 605N, Cornstalk Special, DCF wide pickup, hyd. lift pickup, powered wind guard, surface wrap, bale ramp, Lincoln power luber, 1000 PTO, 7.10-16 gauge wheels, 21.5-16.1 tires, S/N 1VRM16146G1003007

Vermeer 605 Super J, round baler, 540 PTO, twine only, kicker wheels, bale counter, 13.50-15 tires, S//N 1VRA121R4M1005227

New Holland 311, small square baler, 540 PTO, man. swing, man. pickup adjust, twine tie, screw adj. bale tension, bale counter, 7.50-15 RH, 27x9.50-15 LH

STALK CHOPPERS

John Deere