NORTHSIDE LUMBER & SIMMONS LOGGING
Previous Page Listing ID#: 1375049

Auction Location

TOONE, TN 38381
Auction Dates and TimesSALE IS COMPLETED
Saturday Apr 9, 2022 Completed
Auction Type
 Live Auction with Online Bidding  VIEW ONLINE CATALOG
Company Information
Tri-State Auction & Realty, LLC

Website: tristate-auction.com

GoToAuction.com ID#: 5821
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
WE ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 865.376.9103 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption number from your state. NOTE: Some states do not accept out of state direct pay permits.
Listing Information

NORTHSIDE LUMBER & SIMMONS LOGGING

305 OLD TOONE ROAD

TOONE, TN 38381

SATURDAY APRIL 9 10:00 AM CST

JAMES SAVAGE TN LIC # 5129

 

DEBARKER

 

-MELLOTT MODEL 200 ROSSER HEAD DEBARKER W/4’X4’ CONTROL CAB W/40HP MOTORS W/55’ BARN SWEEP CONVEYOR W/CONTROLS (NOT INSTALLED)

FULGHUM ROSSER HEAD DEBARKER W/40HP MOTOR W/CONTROLS W/4’X4’ CONTROL CAB (NOT INSTALLED)

 

PORTABLE MILL & MILL EQUIPMENT

 

- 2006 HURDLE 2 HEAD BLOCK PORTABLE MILL W/CHAIN TYPE LOG TURNER W/4’X4’ CONTROL CAB W/OFF BEARING BELT W/HYDRAULIC CARRIAGE DRIVE W/CONTROLS (NOT INSTALLED)

-HURDLE 20’ 2 STRAND LOG DECK W/NOSE SKIDS W/2 ARM STOP & LOADER W/HYDRAULIC DRIVE (NOT INSTALLED)

- HURDLE 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/CHAIN TYPE LOG TURNER W/OFF BEARING BELT

- HURDLE 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DRIVE

- MEADOWS 30” 2 SAW EDGER W/1 MOVABLE SAW W/INFEED & OUTFEED W/30HP MOTOR

- 200HP 595 RPM 460 VOLT MOTOR

- 70’ BARN SWEEP CONVEYOR & DRIVE

- 25’ OF GRAVITY ROLLS

- 10HP TANK MOUNTED AIR COMPRESSOR

- 

- HURDLE 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/OFF BEARING BELT W/CHAIN TYPE LOG TURNER W/4’ X 4’ CONTROL CAB W/CONTROLS

-HURDLE 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DRIVE

- 56” CIRCLE SAW

- MINER 30” 2 SAW EDGER W/1 MOVABLE SAW W/ 25HP MOTOR W/INFEED & OUTFEED

- 200HP 1775RPM 460 VOLT MOTOR

- 25’ OF GRAVITY ROLLS

- 10HP TANK MOUNTED AIR COMPRESSOR

- 65’ BARN SWEEP CONVEYOR W/DRIVE

- PRECISION 58” 6 KNIFE CHIPPER HORIZONTAL FEED TOP DISCHARGE SN# 2589

- 200 HP 460 VOLT 1785RPM MOTOR

-PRECISION 18” X 21’ VIBRATING CONVEYOR W/TRANSISTOR SPOUT W/DRIVE

- HURDLE 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/4’ X 4’ CONTROL CAB W/OFF BEARING BELT W/CHAIN TYPE LOG TURNER W/CONTROLS

HURDLE 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DIRVE

- MEADOWS 30” 2 SAW EDGER W/1 MOVABLE SAW W/INFEED & OUTFEED

- 56” CIRCLE SAW

- 200HP 460 VOLT 1765 RPM MOTOR

- 65’ BARN SWEEP CONVEYOR W/DRIVE

- 25’ GRAVITY ROLLS

- 10HP TANK MOUNTED AIR COMPRESSOR

- PRECISION 58” 6 KNIFE CHIPPER W/HORIZONTAL FEED TOP DISCHARGE

- 200HP 460 VOLT 1775 RPM MOTOR

- PRECISION 18” X 21’ VIBRATING CONVEYOR W/TRANSITION SPOUT W/DRIVE

- AMERICAN PIONEER 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/OFF BEARING BELT W/4’ X 4’ CONTROL CAB W/CHAIN TYPE LOG TURNER W/CONTROLS

- PIONEER 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DRIVE

- 200 HP 460 VOLT 1775 RPM MOTOR

- MEADOWS 30” 2 SAW EDGER W/1 MOVABLE SAW W/SINGLE BELT TAILING SYSTEM W/25HP MOTOR

- 75HP BARN SWEEP CONVEYOR W/DRIVE

- 56” CIRCLE SAW

- 56” CIRCLE SAW

- 56” CIRCLE SAW

- 56” CIRCLE SAW

- NEW AMERICAN PIONEER 80’ 2 STRAND GRADING CHAIN W/DRIVE

- PRECISION 48” CHIPPACK W/SCREEN & COLLECTOR

- PRECISION 75’ 3 KNIFE CHIPPER

 

ROLLING STOCK

 

- JOHN DEERE 624L ARTICULATING SHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/QUICK ATTACH W/28LX26 RUB W/3800 HOURS SN# 1DW624LZLKF700539

- JOHN DEERE 544K ARTICULATING WHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/QUICK ATTACH W/28LX26 RUB W/8620 HOURS SN# 1DW544KPTGF674690

- QUICK ATTACH FORK FOR JOHN DEERE LOADER

- QUICK ATTACH BUCKET FOR JOHN DEERE LOADER

- KOMATSU WA320 ARTICULATING WHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/QUICK ATTACH W/28LX26 RUB W/4970 HOURS SN# KMTWA135CKNA38920

- QUICK ATTACH FOR KOMATSU WA320

- QUICK ATTACH BUCKET FOR KOMATSU WA320

-VOLVO L90C ARTICULATING WHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/28LX26 RUB W/QUICK ATTACH W/FORKS

- QUICK ATTACH BUCKET FOR VOLVO L90C

- TAYLOR 16,000LB DUAL WHEEL FORKLIFT

- 2021 JOHN DEERE 648L II DUAL ARCH GRAPPLE SKIDDER W/ENCLOSED CAB W/HEAT & AIR W/30.5X32 RUB W/1350 HOURS SN# 1DW648LBHLF708485

- 2021 JOHN DEERE 648L DUAL ARCH GRAPPLE SKIDDER W/ENCLOSED CAB W/HEAT & AIR W/30.5X32 RUB W/1450 HOURS SN# 1DW648LBJMF709324

- JOHN DEERE 648H DUAL ARCH GRAPPLE SKIDDER W/30.5X32 RUB SN# 1DW648HXPED659281 

- JOHN DEERE 748L DUAL ARCH GRAPPLE SKIDDER W/HEAT & AIR CAB W/SWEDEN AVLE W/30.5 X 32 RUB

- JOHN DEERE 648G III DUAL ARCH GRAPPLE SKIDDER W/30.5 X 32 RUB

- JOHN DEERE 548G GRAPPLE SKIDDER W/WINCH W/28L X 26 RUB SN# DW548GX557756

- CAT 515 GRAPPLE SKIDDER W/WINCH W/28L X 26 RUB

- JOHN DEERE 540D CABLE SKIDDER W/28L X 26 RUB W/4,000 ORIGINAL HOURS W/REBUILT ENGINE

- 2016 KOMATSU MODEL XT 406L-3 TRACK CUTTER W/ENCLOSED CAB HEAT & AIR SN# A5133

- SOUTHSTAR DANGLE HEAD MODEL FD750  SN#750005

- 2016 PRENTICE 2670 FELLER BUNCHER W/ENCLOSED CAB HEAT & AIR W/SAW HEAD W/30.5 X 32 RUB SN# 1133

- PRENTICE 2670C FELLER BUNCHER W/ENCLOSED CAB HEAT & AIR W/SAW HEAD W/67 X 34.00 25 RUBBER W/5692 HOURS SN# 2670CHW6700142

- HYDRO AXE 711E FELLER BUNCHER W/ENCLOSED CAB W/SAW HEAD W/30.5 X 32 RUB

- HYDRO AXE 711E FELLER BUNCHER W/ENCLOSED CAB W/SAW HEAD W/30.5 X 32 RUB

-

- JOHN DEERE 750KLGP DOZER W/6-WAY BLADE W/ENCLOSED CAB HEAT & AIR W/FORESTRY PACKAGE W/3190 HOURS SN# 1T0750KXVHF311045

- JOHN DEERE 750B DOZER W/ HYDRAULIC TILT BLADE  SN# T0750BH766368

- GALION 850 MOTOR GRADER W/ENCLOSED CAB W/NEW 5.9 CUMMINS ENGINE W/5951 HOURS

- 2015 BARKO 595 ML MAGNUM KNUCKLEBOOM LOADER W/ENCLOSED CAB HEAT & AIR W/JOY STICK CONTROLS W/CONTINOUIS GRAPPLE W/SAW PACKAGE HOOK UP   MOUNTED ON TANDEM AXLE TRAILER W/4000 HOURS  SN# 11459523859

- CSI 440 SAW BUCK

- 2015 BARKO 595B KNUCKLE BOOM LOADER W/ENCLOSED CAB HEAT & AIR W/JOY STICK CONTROLS W/CONT. GRAPPLE W/SAW PACKAGE HOOK UP W/CSI ULTRA 264 DELIMBER MOUNTED ON TANDEM AXLE TRAILER W/HYDRAULIC STABLEIZERS W/5592 HOURS SN# 11659523966

- CSI 4400 SAW BUCK

- BARKO 495B KNUCKLEBOOM LOADER W/ENCLOSED CAB HEAT & AIR W/JOYSTICK CONTROLS W/CONT. GRAPPLE W/SAW PACKAGE HOOK UP W/8250 HOURS

- CSI 4000 SAW BUCK

- LOG HOG KNUCKLE BOOM LOADER W/CONT. GRAPPLE W/CUMMINS ENGINE MOUNTED ON TANDEM AXLE TRAILER

- CTR SAW BUCK

- NEW STEEL BRIDGE 3 PIECES 30’ LONG EACH PIECE IS 4’ WIDE TO MAKE IS 12’ WIDE

- NEW STEEL BRIDGE 3 PIECES 30’ LONG EACH PIECE IS 4’ WIDE TO MAKE IS 12’ WIDE

- NEW STEEL BRIDGE 3 PIECES 30’ LONG EACH PIECE IS 4’ WIDE TO MAKE IS 12’ WIDE

- MACK MODEL RD 6885 DAY CAB ROAD TRACTOR W/MACK ENGINE W/265,965 MILES VIN 1M2P267Y5PM015874

- 1998 MACK CH DAY CAB ROAD TRACTOR W/MACK ENGINE

- 2010 MACK MODEL CXU613 ROAD TRACTOR W/MACK ENGINE W/SLEEPER W/AIR RIDE W/ALUMINUM WHEELS SN# 1M1AW02Y5BM012534

 

- 2005 PETERBUILT ROAD TRACTOR W/CAT ENGINE W/18 SPD TRANSMISSION W/SLEEPER W/AIR RIDE VIN 1XP-7DB9X-1-3D801689

- 2007 KENWORTH TRI-AXLE DUMP TRUCK W/C13 CAT ENGINE W/10 SPEED TRANSMISSION W/590,197 MILES  VIN 1NKDLU9X37J197426

- MACK TRI-AXLE DUMP TRUCK W/MACK ENGINE W/10 SPD TRANSMISSION W/210,017 MILES W/STEEL BED

-OTTAWA SPOT TRUCK W/HYDRAULIC FIFTH WHEEL W/CUMMINS ENGINE

- OTTAWA SPOT TRUCK W/HYDRAULIC FIFTH WHEEL W/CUMMINS ENGINE

- MACK PULLOUT TRUCK

- 1996 MAGNOLIA 44’ LOWBOY W/LOADING RAMPS SN# 1M9LN442411435252

- 1992 SAVANNAH 40’ DOUBLE BUNK LOG TRAILER

- SAVANNAH 40’ DOUBLE BUNK LOG TRAILER

- 1996 PEERLESS 45’ WALKING FLOOR TRAILER W/ROLLOVER TARP SN# 1PLE04524TPC21123

- 2000 PEERLESS 42’ ALUMINUM OPEN TOP TRAILER W/TARP SN# 1PLE042271PH52141

- LMI 40’ CONTAINER TYPE OPEN TOP TRAILER

- 2006 FORD F750 SERVICE TRUCK W/DIESEL ENGINE W/AUTO CRANE W/AIR COMPRESSOR

VIN 3FRWF75SX7U485117

- 2006 GMC PICKUP W/GAS ENGINE W/AUTO TRANSMISSION W/187,440 MILES

 

 

MISC

 

ELECTRIC MOTORS

CHAIN, SPROCKETS, PULLEYS

LOT OF NEW HURDLE PARTS

SET OF JRB QUICK ATTACH LUMBER FORKS W/DOUBLE HOL DOWN

MATT DRILL

MATT CHOP SAW

 

 
Auction License: JAMES SAVAGE LIC #5120
Photo Gallery




















































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Nov 23
FINGER , TN

Sponsored Links

NORTHSIDE LUMBER & SIMMONS LOGGING

Tri-State Auction & Realty, LLC

Tri-State Auction & Realty, LLC

Contact:
Phone:
Sale Location
305 OLD TOONE ROAD
TOONE, TN 38381
Sale Dates and Times
Saturday Apr 9, 2022 Completed
Sale Terms and Conditions
WE ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 865.376.9103 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption number from your state. NOTE: Some states do not accept out of state direct pay permits.
Listing Details

NORTHSIDE LUMBER & SIMMONS LOGGING

305 OLD TOONE ROAD

TOONE, TN 38381

SATURDAY APRIL 9 10:00 AM CST

JAMES SAVAGE TN LIC # 5129

 

DEBARKER

 

-MELLOTT MODEL 200 ROSSER HEAD DEBARKER W/4’X4’ CONTROL CAB W/40HP MOTORS W/55’ BARN SWEEP CONVEYOR W/CONTROLS (NOT INSTALLED)

FULGHUM ROSSER HEAD DEBARKER W/40HP MOTOR W/CONTROLS W/4’X4’ CONTROL CAB (NOT INSTALLED)

 

PORTABLE MILL & MILL EQUIPMENT

 

- 2006 HURDLE 2 HEAD BLOCK PORTABLE MILL W/CHAIN TYPE LOG TURNER W/4’X4’ CONTROL CAB W/OFF BEARING BELT W/HYDRAULIC CARRIAGE DRIVE W/CONTROLS (NOT INSTALLED)

-HURDLE 20’ 2 STRAND LOG DECK W/NOSE SKIDS W/2 ARM STOP & LOADER W/HYDRAULIC DRIVE (NOT INSTALLED)

- HURDLE 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/CHAIN TYPE LOG TURNER W/OFF BEARING BELT

- HURDLE 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DRIVE

- MEADOWS 30” 2 SAW EDGER W/1 MOVABLE SAW W/INFEED & OUTFEED W/30HP MOTOR

- 200HP 595 RPM 460 VOLT MOTOR

- 70’ BARN SWEEP CONVEYOR & DRIVE

- 25’ OF GRAVITY ROLLS

- 10HP TANK MOUNTED AIR COMPRESSOR

- 

- HURDLE 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/OFF BEARING BELT W/CHAIN TYPE LOG TURNER W/4’ X 4’ CONTROL CAB W/CONTROLS

-HURDLE 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DRIVE

- 56” CIRCLE SAW

- MINER 30” 2 SAW EDGER W/1 MOVABLE SAW W/ 25HP MOTOR W/INFEED & OUTFEED

- 200HP 1775RPM 460 VOLT MOTOR

- 25’ OF GRAVITY ROLLS

- 10HP TANK MOUNTED AIR COMPRESSOR

- 65’ BARN SWEEP CONVEYOR W/DRIVE

- PRECISION 58” 6 KNIFE CHIPPER HORIZONTAL FEED TOP DISCHARGE SN# 2589

- 200 HP 460 VOLT 1785RPM MOTOR

-PRECISION 18” X 21’ VIBRATING CONVEYOR W/TRANSISTOR SPOUT W/DRIVE

- HURDLE 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/4’ X 4’ CONTROL CAB W/OFF BEARING BELT W/CHAIN TYPE LOG TURNER W/CONTROLS

HURDLE 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DIRVE

- MEADOWS 30” 2 SAW EDGER W/1 MOVABLE SAW W/INFEED & OUTFEED

- 56” CIRCLE SAW

- 200HP 460 VOLT 1765 RPM MOTOR

- 65’ BARN SWEEP CONVEYOR W/DRIVE

- 25’ GRAVITY ROLLS

- 10HP TANK MOUNTED AIR COMPRESSOR

- PRECISION 58” 6 KNIFE CHIPPER W/HORIZONTAL FEED TOP DISCHARGE

- 200HP 460 VOLT 1775 RPM MOTOR

- PRECISION 18” X 21’ VIBRATING CONVEYOR W/TRANSITION SPOUT W/DRIVE

- AMERICAN PIONEER 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/OFF BEARING BELT W/4’ X 4’ CONTROL CAB W/CHAIN TYPE LOG TURNER W/CONTROLS

- PIONEER 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DRIVE

- 200 HP 460 VOLT 1775 RPM MOTOR

- MEADOWS 30” 2 SAW EDGER W/1 MOVABLE SAW W/SINGLE BELT TAILING SYSTEM W/25HP MOTOR

- 75HP BARN SWEEP CONVEYOR W/DRIVE

- 56” CIRCLE SAW

- 56” CIRCLE SAW

- 56” CIRCLE SAW

- 56” CIRCLE SAW

- NEW AMERICAN PIONEER 80’ 2 STRAND GRADING CHAIN W/DRIVE

- PRECISION 48” CHIPPACK W/SCREEN & COLLECTOR

- PRECISION 75’ 3 KNIFE CHIPPER

 

ROLLING STOCK

 

- JOHN DEERE 624L ARTICULATING SHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/QUICK ATTACH W/28LX26 RUB W/3800 HOURS SN# 1DW624LZLKF700539

- JOHN DEERE 544K ARTICULATING WHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/QUICK ATTACH W/28LX26 RUB W/8620 HOURS SN# 1DW544KPTGF674690

- QUICK ATTACH FORK FOR JOHN DEERE LOADER

- QUICK ATTACH BUCKET FOR JOHN DEERE LOADER

- KOMATSU WA320 ARTICULATING WHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/QUICK ATTACH W/28LX26 RUB W/4970 HOURS SN# KMTWA135CKNA38920

- QUICK ATTACH FOR KOMATSU WA320

- QUICK ATTACH BUCKET FOR KOMATSU WA320

-VOLVO L90C ARTICULATING WHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/28LX26 RUB W/QUICK ATTACH W/FORKS

- QUICK ATTACH BUCKET FOR VOLVO L90C

- TAYLOR 16,000LB DUAL WHEEL FORKLIFT

- 2021 JOHN DEERE 648L II DUAL ARCH GRAPPLE SKIDDER W/ENCLOSED CAB W/HEAT & AIR W/30.5X32 RUB W/1350 HOURS SN# 1DW648LBHLF708485

- 2021 JOHN DEERE 648L DUAL ARCH GRAPPLE SKIDDER W/ENCLOSED CAB W/HEAT & AIR W/30.5X32 RUB W/1450 HOURS SN# 1DW648LBJMF709324

- JOHN DEERE 648H DUAL ARCH GRAPPLE SKIDDER W/30.5X32 RUB SN# 1DW648HXPED659281 

- JOHN DEERE 748L DUAL ARCH GRAPPLE SKIDDER W/HEAT & AIR CAB W/SWEDEN AVLE W/30.5 X 32 RUB

- JOHN DEERE 648G III DUAL ARCH GRAPPLE SKIDDER W/30.5 X 32 RUB

- JOHN DEERE 548G GRAPPLE SKIDDER W/WINCH W/28L X 26 RUB SN# DW548GX557756

- CAT 515 GRAPPLE SKIDDER W/WINCH W/28L X 26 RUB

- JOHN DEERE 540D CABLE SKIDDER W/28L X 26 RUB W/4,000 ORIGINAL HOURS W/REBUILT ENGINE

- 2016 KOMATSU MODEL XT 406L-3 TRACK CUTTER W/ENCLOSED CAB HEAT & AIR SN# A5133

- SOUTHSTAR DANGLE HEAD MODEL FD750  SN#750005

- 2016 PRENTICE 2670 FELLER BUNCHER W/ENCLOSED CAB HEAT & AIR W/SAW HEAD W/30.5 X 32 RUB SN# 1133

- PRENTICE 2670C FELLER BUNCHER W/ENCLOSED CAB HEAT & AIR W/SAW HEAD W/67 X 34.00 25 RUBBER W/5692 HOURS SN# 2670CHW6700142

- HYDRO AXE 711E FELLER BUNCHER W/ENCLOSED CAB W/SAW HEAD W/30.5 X 32 RUB

- HYDRO AXE 711E FELLER BUNCHER W/ENCLOSED CAB W/SAW HEAD W/30.5 X 32 RUB

-

- JOHN DEERE 750KLGP DOZER W/6-WAY BLADE W/ENCLOSED CAB HEAT & AIR W/FORESTRY PACKAGE W/3190 HOURS SN# 1T0750KXVHF311045

- JOHN DEERE 750B DOZER W/ HYDRAULIC TILT BLADE  SN# T0750BH766368

- GALION 850 MOTOR GRADER W/ENCLOSED CAB W/NEW 5.9 CUMMINS ENGINE W/5951 HOURS

- 2015 BARKO 595 ML MAGNUM KNUCKLEBOOM LOADER W/ENCLOSED CAB HEAT & AIR W/JOY STICK CONTROLS W/CONTINOUIS GRAPPLE W/SAW PACKAGE HOOK UP   MOUNTED ON TANDEM AXLE TRAILER W/4000 HOURS  SN# 11459523859

- CSI 440 SAW BUCK

- 2015 BARKO 595B KNUCKLE BOOM LOADER W/ENCLOSED CAB HEAT & AIR W/JOY STICK CONTROLS W/CONT. GRAPPLE W/SAW PACKAGE HOOK UP W/CSI ULTRA 264 DELIMBER MOUNTED ON TANDEM AXLE TRAILER W/HYDRAULIC STABLEIZERS W/5592 HOURS SN# 11659523966

- CSI 4400 SAW BUCK

- BARKO 495B KNUCKLEBOOM LOADER W/ENCLOSED CAB HEAT & AIR W/JOYSTICK CONTROLS W/CONT. GRAPPLE W/SAW PACKAGE HOOK UP W/8250 HOURS

- CSI 4000 SAW BUCK

- LOG HOG KNUCKLE BOOM LOADER W/CONT. GRAPPLE W/CUMMINS ENGINE MOUNTED ON TANDEM AXLE TRAILER

- CTR SAW BUCK

- NEW STEEL BRIDGE 3 PIECES 30’ LONG EACH PIECE IS 4’ WIDE TO MAKE IS 12’ WIDE

- NEW STEEL BRIDGE 3 PIECES 30’ LONG EACH PIECE IS 4’ WIDE TO MAKE IS 12’ WIDE

- NEW STEEL BRIDGE 3 PIECES 30’ LONG EACH PIECE IS 4’ WIDE TO MAKE IS 12’ WIDE

- MACK MODEL RD 6885 DAY CAB ROAD TRACTOR W/MACK ENGINE W/265,965 MILES VIN 1M2P267Y5PM015874

- 1998 MACK CH DAY CAB ROAD TRACTOR W/MACK ENGINE

- 2010 MACK MODEL CXU613 ROAD TRACTOR W/MACK ENGINE W/SLEEPER W/AIR RIDE W/ALUMINUM WHEELS SN# 1M1AW02Y5BM012534

 

- 2005 PETERBUILT ROAD TRACTOR W/CAT ENGINE W/18 SPD TRANSMISSION W/SLEEPER W/AIR RIDE VIN 1XP-7DB9X-1-3D801689

- 2007 KENWORTH TRI-AXLE DUMP TRUCK W/C13 CAT ENGINE W/10 SPEED TRANSMISSION W/590,197 MILES  VIN 1NKDLU9X37J197426

- MACK TRI-AXLE DUMP TRUCK W/MACK ENGINE W/10 SPD TRANSMISSION W/210,017 MILES W/STEEL BED

-OTTAWA SPOT TRUCK W/HYDRAULIC FIFTH WHEEL W/CUMMINS ENGINE

- OTTAWA SPOT TRUCK W/HYDRAULIC FIFTH WHEEL W/CUMMINS ENGINE

- MACK PULLOUT TRUCK

- 1996 MAGNOLIA 44’ LOWBOY W/LOADING RAMPS SN# 1M9LN442411435252

- 1992 SAVANNAH 40’ DOUBLE BUNK LOG TRAILER

- SAVANNAH 40’ DOUBLE BUNK LOG TRAILER

- 1996 PEERLESS 45’ WALKING FLOOR TRAILER W/ROLLOVER TARP SN# 1PLE04524TPC21123

- 2000 PEERLESS 42’ ALUMINUM OPEN TOP TRAILER W/TARP SN# 1PLE042271PH52141

- LMI 40’ CONTAINER TYPE OPEN TOP TRAILER

- 2006 FORD F750 SERVICE TRUCK W/DIESEL ENGINE W/AUTO CRANE W/AIR COMPRESSOR

VIN 3FRWF75SX7U485117

- 2006 GMC PICKUP W/GAS ENGINE W/AUTO TRANSMISSION W/187,440 MILES

 

 

MISC

 

ELECTRIC MOTORS

CHAIN, SPROCKETS, PULLEYS

LOT OF NEW HURDLE PARTS

SET OF JRB QUICK ATTACH LUMBER FORKS W/DOUBLE HOL DOWN

MATT DRILL

MATT CHOP SAW

 

 
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
NORTHSIDE LUMBER & SIMMONS LOGGING
 Live Auction w/Online Bidding
Auction Date(s)
Saturday Apr 9, 2022 Completed
Auction Location

TOONE, TN 38381
Company
Tri-State Auction & Realty, LLC

Website: tristate-auction.com

Listing Terms and Conditions
WE ACCEPT CREDIT OR DEBIT CARDS. PAYMENT IN FULL REQUIRED DAY OF AUCTION UNLESS APPROVED BY AUCTIONEER BEFORE THE AUCTION. NEW BIDDERS BANK LETTER OF GUARANTEE OR REFUNDABLE DEPOSIT OF 25 PERCENT OF MAXIMUM ANTICIPATED BID IS REQUIRED IN ORDER TO BE APPROVED TO BID. FAX LETTER TO 865.376.9103 OR CALL 800.334.4395 OR EMAIL auctions@tristate-auction.com FOR WIRING INSTRUCTIONS. All descriptions are conscientiously described by the Seller and Auction Company, however, neither assume any liability for errors or omissions. Everything is sold "as is where is" with no expressed or implied warranties. No guarantee of merchantability or suitability for intended usage is given or implied. The successful bidder is responsible for their lot from the time the auctioneer calls item sold. Neither the Auction Company nor the Seller assumes responsibility for any loss, damage or theft occurring after the hammer falls. Neither the Auction Company nor the Seller assumes any responsibility for any injuries suffered while inspecting, buying or removing equipment. Jurisdiction and venue regarding any legal dispute arising here from shall be held in (LOCATION). Most states require collection of sales tax on machinery purchases unless buyer can furnish a valid sales and use tax exemption number from your state. NOTE: Some states do not accept out of state direct pay permits.

NORTHSIDE LUMBER & SIMMONS LOGGING

305 OLD TOONE ROAD

TOONE, TN 38381

SATURDAY APRIL 9 10:00 AM CST

JAMES SAVAGE TN LIC # 5129

 

DEBARKER

 

-MELLOTT MODEL 200 ROSSER HEAD DEBARKER W/4’X4’ CONTROL CAB W/40HP MOTORS W/55’ BARN SWEEP CONVEYOR W/CONTROLS (NOT INSTALLED)

FULGHUM ROSSER HEAD DEBARKER W/40HP MOTOR W/CONTROLS W/4’X4’ CONTROL CAB (NOT INSTALLED)

 

PORTABLE MILL & MILL EQUIPMENT

 

- 2006 HURDLE 2 HEAD BLOCK PORTABLE MILL W/CHAIN TYPE LOG TURNER W/4’X4’ CONTROL CAB W/OFF BEARING BELT W/HYDRAULIC CARRIAGE DRIVE W/CONTROLS (NOT INSTALLED)

-HURDLE 20’ 2 STRAND LOG DECK W/NOSE SKIDS W/2 ARM STOP & LOADER W/HYDRAULIC DRIVE (NOT INSTALLED)

- HURDLE 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/CHAIN TYPE LOG TURNER W/OFF BEARING BELT

- HURDLE 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DRIVE

- MEADOWS 30” 2 SAW EDGER W/1 MOVABLE SAW W/INFEED & OUTFEED W/30HP MOTOR

- 200HP 595 RPM 460 VOLT MOTOR

- 70’ BARN SWEEP CONVEYOR & DRIVE

- 25’ OF GRAVITY ROLLS

- 10HP TANK MOUNTED AIR COMPRESSOR

- 

- HURDLE 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/OFF BEARING BELT W/CHAIN TYPE LOG TURNER W/4’ X 4’ CONTROL CAB W/CONTROLS

-HURDLE 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DRIVE

- 56” CIRCLE SAW

- MINER 30” 2 SAW EDGER W/1 MOVABLE SAW W/ 25HP MOTOR W/INFEED & OUTFEED

- 200HP 1775RPM 460 VOLT MOTOR

- 25’ OF GRAVITY ROLLS

- 10HP TANK MOUNTED AIR COMPRESSOR

- 65’ BARN SWEEP CONVEYOR W/DRIVE

- PRECISION 58” 6 KNIFE CHIPPER HORIZONTAL FEED TOP DISCHARGE SN# 2589

- 200 HP 460 VOLT 1785RPM MOTOR

-PRECISION 18” X 21’ VIBRATING CONVEYOR W/TRANSISTOR SPOUT W/DRIVE

- HURDLE 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/4’ X 4’ CONTROL CAB W/OFF BEARING BELT W/CHAIN TYPE LOG TURNER W/CONTROLS

HURDLE 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DIRVE

- MEADOWS 30” 2 SAW EDGER W/1 MOVABLE SAW W/INFEED & OUTFEED

- 56” CIRCLE SAW

- 200HP 460 VOLT 1765 RPM MOTOR

- 65’ BARN SWEEP CONVEYOR W/DRIVE

- 25’ GRAVITY ROLLS

- 10HP TANK MOUNTED AIR COMPRESSOR

- PRECISION 58” 6 KNIFE CHIPPER W/HORIZONTAL FEED TOP DISCHARGE

- 200HP 460 VOLT 1775 RPM MOTOR

- PRECISION 18” X 21’ VIBRATING CONVEYOR W/TRANSITION SPOUT W/DRIVE

- AMERICAN PIONEER 2 HEAD BLOCK PORTABLE MILL W/HYDRAULIC CARRIAGE DRIVE W/OFF BEARING BELT W/4’ X 4’ CONTROL CAB W/CHAIN TYPE LOG TURNER W/CONTROLS

- PIONEER 18’ 2 STRAND LOG DECK W/STOP & LOADER W/NOSE SKIDS W/HYDRAULIC DRIVE

- 200 HP 460 VOLT 1775 RPM MOTOR

- MEADOWS 30” 2 SAW EDGER W/1 MOVABLE SAW W/SINGLE BELT TAILING SYSTEM W/25HP MOTOR

- 75HP BARN SWEEP CONVEYOR W/DRIVE

- 56” CIRCLE SAW

- 56” CIRCLE SAW

- 56” CIRCLE SAW

- 56” CIRCLE SAW

- NEW AMERICAN PIONEER 80’ 2 STRAND GRADING CHAIN W/DRIVE

- PRECISION 48” CHIPPACK W/SCREEN & COLLECTOR

- PRECISION 75’ 3 KNIFE CHIPPER

 

ROLLING STOCK

 

- JOHN DEERE 624L ARTICULATING SHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/QUICK ATTACH W/28LX26 RUB W/3800 HOURS SN# 1DW624LZLKF700539

- JOHN DEERE 544K ARTICULATING WHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/QUICK ATTACH W/28LX26 RUB W/8620 HOURS SN# 1DW544KPTGF674690

- QUICK ATTACH FORK FOR JOHN DEERE LOADER

- QUICK ATTACH BUCKET FOR JOHN DEERE LOADER

- KOMATSU WA320 ARTICULATING WHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/QUICK ATTACH W/28LX26 RUB W/4970 HOURS SN# KMTWA135CKNA38920

- QUICK ATTACH FOR KOMATSU WA320

- QUICK ATTACH BUCKET FOR KOMATSU WA320

-VOLVO L90C ARTICULATING WHEEL LOADER W/ENCLOSED CAB HEAT & AIR W/28LX26 RUB W/QUICK ATTACH W/FORKS

- QUICK ATTACH BUCKET FOR VOLVO L90C

- TAYLOR 16,000LB DUAL WHEEL FORKLIFT

- 2021 JOHN DEERE 648L II DUAL ARCH GRAPPLE SKIDDER W/ENCLOSED CAB W/HEAT & AIR W/30.5X32 RUB W/1350 HOURS SN# 1DW648LBHLF708485

- 2021 JOHN DEERE 648L DUAL ARCH GRAPPLE SKIDDER W/ENCLOSED CAB W/HEAT & AIR W/30.5X32 RUB W/1450 HOURS SN# 1DW648LBJMF709324

- JOHN DEERE 648H DUAL ARCH GRAPPLE SKIDDER W/30.5X32 RUB SN# 1DW648HXPED659281 

- JOHN DEERE 748L DUAL ARCH GRAPPLE SKIDDER W/HEAT & AIR CAB W/SWEDEN AVLE W/30.5 X 32 RUB

- JOHN DEERE 648G III DUAL ARCH GRAPPLE SKIDDER W/30.5 X 32 RUB

- JOHN DEERE 548G GRAPPLE SKIDDER W/WINCH W/28L X 26 RUB SN# DW548GX557756

- CAT 515 GRAPPLE SKIDDER W/WINCH W/28L X 26 RUB

- JOHN DEERE 540D CABLE SKIDDER W/28L X 26 RUB W/4,000 ORIGINAL HOURS W/REBUILT ENGINE

- 2016 KOMATSU MODEL XT 406L-3 TRACK CUTTER W/ENCLOSED CAB HEAT & AIR SN# A5133

- SOUTHSTAR DANGLE HEAD MODEL FD750  SN#750005

- 2016 PRENTICE 2670 FELLER BUNCHER W/ENCLOSED CAB HEAT & AIR W/SAW HEAD W/30.5 X 32 RUB SN# 1133

- PRENTICE 2670C FELLER BUNCHER W/ENCLOSED CAB HEAT & AIR W/SAW HEAD W/67 X 34.00 25 RUBBER W/5692 HOURS SN# 2670CHW6700142

- HYDRO AXE 711E FELLER BUNCHER W/ENCLOSED CAB W/SAW HEAD W/30.5 X 32 RUB

- HYDRO AXE 711E FELLER BUNCHER W/ENCLOSED CAB W/SAW HEAD W/30.5 X 32 RUB

-

- JOHN DEERE 750KLGP DOZER W/6-WAY BLADE W/ENCLOSED CAB HEAT & AIR W/FORESTRY PACKAGE W/3190 HOURS SN# 1T0750KXVHF311045

- JOHN DEERE 750B DOZER W/ HYDRAULIC TILT BLADE  SN# T0750BH766368

- GALION 850 MOTOR GRADER W/ENCLOSED CAB W/NEW 5.9 CUMMINS ENGINE W/5951 HOURS

- 2015 BARKO 595 ML MAGNUM KNUCKLEBOOM LOADER W/ENCLOSED CAB HEAT & AIR W/JOY STICK CONTROLS W/CONTINOUIS GRAPPLE W/SAW PACKAGE HOOK UP   MOUNTED ON TANDEM AXLE TRAILER W/4000 HOURS  SN# 11459523859

- CSI 440 SAW BUCK

- 2015 BARKO 595B KNUCKLE BOOM LOADER W/ENCLOSED CAB HEAT & AIR W/JOY STICK CONTROLS W/CONT. GRAPPLE W/SAW PACKAGE HOOK UP W/CSI ULTRA 264 DELIMBER MOUNTED ON TANDEM AXLE TRAILER W/HYDRAULIC STABLEIZERS W/5592 HOURS SN# 11659523966

- CSI 4400 SAW BUCK

- BARKO 495B KNUCKLEBOOM LOADER W/ENCLOSED CAB HEAT & AIR W/JOYSTICK CONTROLS W/CONT. GRAPPLE W/SAW PACKAGE HOOK UP W/8250 HOURS

- CSI 4000 SAW BUCK

- LOG HOG KNUCKLE BOOM LOADER W/CONT. GRAPPLE W/CUMMINS ENGINE MOUNTED ON TANDEM AXLE TRAILER

- CTR SAW BUCK

- NEW STEEL BRIDGE 3 PIECES 30’ LONG EACH PIECE IS 4’ WIDE TO MAKE IS 12’ WIDE

- NEW STEEL BRIDGE 3 PIECES 30’ LONG EACH PIECE IS 4’ WIDE TO MAKE IS 12’ WIDE

- NEW STEEL BRIDGE 3 PIECES 30’ LONG EACH PIECE IS 4’ WIDE TO MAKE IS 12’ WIDE

- MACK MODEL RD 6885 DAY CAB ROAD TRACTOR W/MACK ENGINE W/265,965 MILES VIN 1M2P267Y5PM015874

- 1998 MACK CH DAY CAB ROAD TRACTOR W/MACK ENGINE

- 2010 MACK MODEL CXU613 ROAD TRACTOR W/MACK ENGINE W/SLEEPER W/AIR RIDE W/ALUMINUM WHEELS SN# 1M1AW02Y5BM012534

 

- 2005 PETERBUILT ROAD TRACTOR W/CAT ENGINE W/18 SPD TRANSMISSION W/SLEEPER W/AIR RIDE VIN 1XP-7DB9X-1-3D801689

- 2007 KENWORTH TRI-AXLE DUMP TRUCK W/C13 CAT ENGINE W/10 SPEED TRANSMISSION W/590,197 MILES  VIN 1NKDLU9X37J197426

- MACK TRI-AXLE DUMP TRUCK W/MACK ENGINE W/10 SPD TRANSMISSION W/210,017 MILES W/STEEL BED

-OTTAWA SPOT TRUCK W/HYDRAULIC FIFTH WHEEL W/CUMMINS ENGINE

- OTTAWA SPOT TRUCK W/HYDRAULIC FIFTH WHEEL W/CUMMINS ENGINE

- MACK PULLOUT TRUCK

- 1996 MAGNOLIA 44’ LOWBOY W/LOADING RAMPS SN# 1M9LN442411435252

- 1992 SAVANNAH 40’ DOUBLE BUNK LOG TRAILER

- SAVANNAH 40’ DOUBLE BUNK LOG TRAILER

- 1996 PEERLESS 45’ WALKING FLOOR TRAILER W/ROLLOVER TARP SN# 1PLE04524TPC21123

- 2000 PEERLESS 42’ ALUMINUM OPEN TOP TRAILER W/TARP SN# 1PLE042271PH52141

- LMI 40’ CONTAINER TYPE OPEN TOP TRAILER

- 2006 FORD F750 SERVICE TRUCK W/DIESEL ENGINE W/AUTO CRANE W/AIR COMPRESSOR

VIN 3FRWF75SX7U485117

- 2006 GMC PICKUP W/GAS ENGINE W/AUTO TRANSMISSION W/187,440 MILES

 

 

MISC

 

ELECTRIC MOTORS

CHAIN, SPROCKETS, PULLEYS

LOT OF NEW HURDLE PARTS

SET OF JRB QUICK ATTACH LUMBER FORKS W/DOUBLE HOL DOWN

MATT DRILL

MATT CHOP SAW