Air Works Consignment Sawmill Ring
Previous Page Listing ID#: 1372772

Auction Location

Millersburg, IN 44654
Auction Dates and TimesSALE IS COMPLETED
Thursday Feb 17, 2022 Completed
Friday Feb 18, 2022 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

There is a 10% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (Additional 3% CC fee will be charged for CC payments). All items are pick-up only. Loadout terms: Monday, Tuesday and Wednesday 8am-4pm- any items left will be sold or disposed of by auction company.
All items must be removed within 7 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.


 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
    1. Online Bids. Online bids may not be reduced or retracted.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  1.  
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.



 
Listing Information
Annual Air Works Consignment Auction. Looking for a good lineup of sawmill and pallet related items. All items are pick-up only. Payment terms: Cash, check, wire transfer, or any major credit card. (Additional 3% CC fee will be charged for CC payments). All items are pick-up only. Loadout terms: Monday, Tuesday and Wednesday 8am-4pm- any items left will be sold or disposed of by auction company.
All items must be removed within 7 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

00
Information Lot
Annual Air Works Consignment Auction. Looking for a good lineup of sawmill and pallet related items. Call Eugene at 260.350.8953 for more information.

26001
Napa 10 HP Air Compressor
Pump # 1312100837, serial # 112514-7727

26002
Air Tank
24" x 6'

26002B
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

26002A
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

26003
Mellott 3 Strand Log Deck with Stop and Load
10' x 17' with steel structure on one end only, no drive

26004
1999 Mellott Rosserhead Debarker
Item #200, Type 11, serial # 99200393, includes cab and controls, 30 HP electric on head

26005
Cornell Barn Sweep That Was Underneath Debarker
42" x 24' with additional, 34' on incline, electric drive

26006
Log Trough with Kickers
33" x 45' with 12" chain, hydraulic drive

26007
3 Strand Log Deck
10' x 25' with 5' steel structure

26008
30" Chain Turner
Hydraulic drive

26009
36" Edmiston's 4 HB Carriage
14' 6" carriage, 34 1/4" center to center of track x 48' long, includes cab, controls, feed, drive, track, and frame

26010
Subframe for Carriage

26011
Steps

26012
5 HP Hydraulic Pack

26013
Hydraulic Reservoir

26014
Hydraulic Valves

26015
Roll Case with Transfer
40" x 37' x 48" high, 10" x 30" rolls, 2" shaft, 31" roll spacing, electric drive

26016
Roll Case
33" x 15' x 8' x 50" high

26017
Roll Case
33" x 15' x 8' x 50" high

26018
Vibrating Conveyor
34" x 40' x 25" high, 24" pan, 8" sides, electric drive, infeed for chipper

26019
Patz Barn Sweep

26020
5 Strand Transfer Deck
10' x 15'6" x 48" high, H 78 B rooftop chain, electric drive

26021
Patz Barn Sweep

26022
Belt Conveyor
8', no belt

26023
Belt Conveyor
25" x 30' x 30" high, with 16" belt, electric drive, 5" sides

26024
M.A. Ward Outfeed for Edger SELLS AFTER EDGER LOT 26032
53" x 24' x 49" high, no drive

26025
Barn Sweep Drive

26026
Lumber Cart

26027
Lumber Cart

26028
Lumber Cart

26029
Lumber Carts
Total of 2

26030
Lumber Carts
Total of 2

26031
Infeed for Edger SELLS AFTER EDGER LOT 26032

53" x 10' x 36" high, 8 1/2" x 47" rolls, does not have drive chain on rolls, air jump chain that is hydraulic drive

26032
Frick 4 Blade Edger

No. 84836, 8" x 48", 26" blades, 1 moveable blade, no drive, includes laser frame but no lasers are installed

26033
125 HP Lincoln Electric Motor
405T frame, 1770 RPM, was used for edger

26034
26" Edger Blades
5 1/4" arbor, 8 total

26035
4 Strand Green Chain
10' x 60' x 36" high, electric drive

26036
Lumber Carts
Total of 2

26037
Lumber Carts
Total of 2

26038
Lumber Carts
Total of 2

26039
48" Precision Chipper
6 knife, no drive

26040
Electric Motor
100 HP, frame 444D

26041
Precision Chip Screen
6' x 6', 1 3/4" screen

26042
24" Blower
Electric drive

26043
5' Cyclone

26044
Belt Conveyor
24" x 7', no drive, 16" belt

26045
Belt Conveyor
26" x 11', 24" belt, no drive

26046
Cyclone
5' x 10', with mounting frame

26047
Hydraulic Pack
10 HP electric, with mounting frame

26048
Slab Saw
Predator 670cc gas engine, 28" sawblade, belt drive power feed, 19" x 8' infeed belt

26049
Steel Banding Cart
crimping tool, roll of 1 1/4" steel banding

26050
10 Ton Chain Hoist and Trolley

26051
Dust Cyclone
8' x 16" with mounting frame, adapter for 20" pipe

26052
P+H Heavy Lift
Control wire

26053
Stretch Wrapping Machine
31" x 10' infeed and outfeed, Trackside Mfg., 24" belt, no power

26054
Morgan Single Head Resaw
24" wheels, cant return belt, 1 1/4 blade

26055
Door Machine

26054A
BrushMaster Chipper Shredder
Model-CH3, 11 hp gas motor, 2-way feed, Portable

26055
Baker Single Head Resaw with Return
Model BBR-O, serial # 93-587, 3/4" x 28" bandwheels, 1 1/4" bands, 20 HP electric motor, electric control board

26055A
Baker Transfer Belt
24" x 4' 6", electric drive

26055B
Baker Transfer Belt
24" x 4' 6", no drive

26055C
Manual Sealless Strapping Tool
Model A333, 1/2" 5/8" or 3/4" banding, new in box, Fromm knockoff

26056
Dust Cyclone
4' x 8'

26057
Air Compressor
On vertical tank

26058
Dust Blower Rogerair
48", 50 HP electric

26059
Dust Cyclone
4' x 10'

26060
Notcher
Adjustable width, no motor on head, 12" wide head, hydraulic drive on feed

26061
Campbell Hausfield Air Compressor
5 HP electric, on vertical tank

26062
2 Strand Log Deck
5' 6" x 26' with 4' skid with stop 'n load, hydraulic drive

26063
Rollcase
5" x 33" rolls, 13' long

26064
I Beam Frame
5' x 7' x 42" steel frame

26065
Slab Rack
4' x 6' x 4' high

26066
Steel Frame
5" x 5" tubing, 5' x 7' x 3' high

26067
Rollcase
26" x 12' 6", 4 1/2" x 21" rolls, no drive

26068
Cutoff Saw
18" blade, no power, sliding table with stop

26069
6 Strand Unscrambler
14' x 7' high, Ligna Machinery, hydraulic drive, electric solenoid valves

26070
HMC Trim Saw
Model ET10, serial # 276-91, 2 saws 1 moving, self contained hydraulic unit for moving saw, 30" blades direct mounted on electric motor, has set works, 22" x 22' dust conveyor with 16" belt

26071
Valley Machine 4" x 30" Edger
Model BAB, serial # 02008A2, 32" x 9' infeed with board guide, 32" x 8' outfeed, 2 moving saws hydraulic powered, 24" x 20" x 20" hydraulic tank on stand, 16" split saws, 2 laser lights, 5 extra saws, feed rolls show some wear

26072
Schuttle Buffalo Hammer Mill
Model 1320, serial # 04.04.076, 3600 RPM, 12 1/2" wide screen, 3 screens, 40 HP electric motor

26073
Fulghum Chip Shaker Screen
Model 5x5 rotor, serial # F1-R-447, 2 HP electric motor

26074
Meadows 3 Saw Edger
4" x 36", 2 moving saws, 16" split saws, 9 extra saws, 36" x 8' infeed, 36" x 7' outfeed, hydraulic blade adjust, hydraulic drive on saws

26075
3 Strand Transfer Deck
6' x 17' x 34", gearbox, no motor

26076
Air Tank
Approx. 250 gallon

26077
Air Tank
Approx. 75 gallon

26078
Cornell Dust Blower
20", no motor

26079
36" Log Turner
Chain type, hydraulic drive

26080
Cyclone
4' x 10', mounting frame, pipe with elbow

26081
Keim Dust Blower
26", no motor

26081A
Morbark Vibrating Conveyor
25" x 18', 18" pan, 6" sides, chipper feed chute, drive unit but no motor

26082
Frick Husk Frame
New mandrel and bearings, 18" x 5' off bearer belt, no pulley, heavy duty frame, good condition

26083
54" Circular Saw
50 tooth, RH600

26084
Cyclone
8' x 13', includes mounting frame

26085
Metal Dust Bin
8' x 8' x 14', includes mounting frame

26086
Cyclone and Pipe
44" x 12', mounting frame for top of lot 26085, all pipe

26087
Steel Dip Tank
5' x 5' x 20', no liner, good condition

26088
Poly Septic Tank
1500 gal.

26089
Slanted Slab Pen
5' x 14' x 6'

26090
Hazeldene 4 Strand Unscrambler
Model U165

26091
Webster Vibrating Conveyor
33" x 16', 21" pan, 16" sides, no drive, has some new parts

26092
Concave Belt Conveyor
16" x 16' with electric drive, 16" x 15' with hydraulic drive

26093
3 Strand Transfer Deck
9' x 18' x 43", no drive, cant stop

26094
5 Groove V- Belts
3 pc. 8V1800, brand new

26095
Scissor Lift Table
46" x 66", electric

26096
Belt Conveyor
34" x 112", no drive

26097
Scissor Lift Table
69" x 100", hydraulic unit with electric

26098
Belt Conveyor
28" x 30", adjustable legs, 6" x 24" rolls, no belt, hydraulic drive

26099
Clary Sidewinder Pallet Dismantler
Serial # 334 48, 77" x 84" table, 6' saw opening, 2" x 30" wheels, 1 1/4'' metal cutting blade, electric drive

26100
Morgan Board Deduster
Serial # 072597095, electric drive, works as it should

26101
Concave Belt Conveyor
12" x 22', hydraulic drive

26102
Morbark Chip Blower
30" Blower, 15 HP electric motor, 10' pipe

26103
Dust Blower
18'' no drive

26104
Morbark Chip-Pac
Model 48, serial # 958, 6 x 6 shaker screen, hydraulic motor on shaker, no drive on chipper, includes extra knives

26105

26106
Mellott Chain Log Turner
48", new lift cylinder, hydraulic drive with controls, good condition

26107
Montgomery Hydraulic Pack
No drive, good condition

26108
Carrier Vibrating Conveyor
Model BM-0805, serial # 19976 LK6819, 39" pan, 8" sides, 45" x 34' plus 5' fiberglass section, electric drive, good condition, metal detector

26109
EZ Slab Cutting Chop Saw
Model Hershberger Mfg., date 2019, automated chop saw lines shaft ready, 20" x 8' infeed belt, 22" x 8' incline outfeed, everything runs off one motor, 30" blade

26110
4 Strand Transfer
9' 6" x 64", adjustable height, #80 roller chain, no drive

26111
28" Blower
No drive

26112
Cornell Gang Saw
Model 621-S, serial # 115-9-87, control box, extra head for sizer, double arbor, top arbor has cant sizer

26113
Dresser Gear Box
Model 120-DU, serial # 410778, ratio 99.44

26114
Waechter Double Head Resaw
1" x 20" wheel, 1" bands, slatbed feed, 7 1/2 HP electric on heads, hydraulic infeed, self contained hydraulic unit, control box, air cylinder down pressure, hydraulic motor on each wheel

26115
Concave Belt Conveyor
16" x 5', hydraulic drive

26116
Hydraulic Pumps
Jack shaft with 2 pumps

26117
Hydraulic Pump
Jack shaft with pump and pulley

26118
Quincy Air Compressor
Model 3701S 106, serial # 20071217-0041

26119
11 KW Lima Generator
Serial AD 149725 CPB, 1800 RPM, on mount

26120
Heat Unit
14" x 14" x 56", engine exhaust heat diverter

26121
Hydraulic Tank Wall Mount
20" x 42" x 24" high

26122
Greenchain Shaft with Sprockets
2 1/8" shaft 10' 6" long, 1 15/16" shaft 10' long, for green chain

26123
Line Shaft
2 7/16" x 16' shaft with pulleys and bearings, 1 15/16" x 20" jack shaft with pulleys and bearings, 2 15/16" x 52" shaft with pulleys and bearings

26124
Concave Belt Conveyor
16" x 32', 15" belt, hydraulic drive

26125
Belt Conveyor
24" x 11', no drive

26126
Whirlwind Chop Saw
Model 2121, serial # 2594M81L, 18" x 8' infeed rolls, upcut saw

26127
Rotary Car Lift
Model E-106, 20" x 6' press platform, track mount, hydraulic powered

26128
Electric Motor
50 HP, 326T frame, 1780 RPM, 2 1/8" shaft

26129
Morbark Electric Motor
Model SF4P100T6TY, 100 HP, 1785 RPM, frame 405T, 2 7/8" shaft

26130
Single Head Notcher
Hand feed, electric motor

26131
Lumber Racks
3' x 4' x 3' high + 40" extensions, 2 sets

26132
Sliding Table Saw
4' x 12' table, overhead sliding saw, 15" blade, electric motor, chain drive on saw movement

26133
Shop Built Scragg Mill
4- 30" blades, no motor on saws, hydraulic drive on feed, no feed chain

26134
Single Head Notcher
Manual feed, no motor, extra blade

26135
Rip Saw
Power feed, no motor

26136
Reckart Blower
46", no motor

26137
Kent-Corp Cutoff Saw
5 HP electric, 8' skate rolls

26138
Guarding
Free standing guard, 32" high, 1 pieces 7', 1 piece 3', 3 pieces 3'

26139
Froedge 450R Deduster
Model LBD 450, serial # 237190, electric drive

26140
Belt Conveyor
18" x 11', electric dive

26141
Statson-Ross Straight Line Ripsaw
Web feed bed, electric motor, gang rip saw, power raise and lower

26142
Saw Blades
Assortment of blades

26143
Hud-Son Bandsaw
Farm Boss 36", Vanguard motor, fully hydraulic, on board turner, tapers, 1' x 26" wheels, 36" x 28' bed, 1 1/4" bands, 5 HP electric on hydraulic

26144
Meadows Carriage and Track
15' carriage, 4 headblocks, 2 sets of new Frick air dogs, air tapers, hand set, air motor on Jog and recede, paragraph, not used since rebuilt by McCormick and Sons

26145
Frick Husk with Top Saw
6' mandrel, 30" top saw, 22" x 6' off bearer belt, 30 HP electric on top saw

26146
Dyna Firewood Processor
Model SC-14, serial 18281, mfg. date 9-12, Kohler gas motor on hydraulic, fully hydraulic controls

26147
Wood-Mizer LT 70
Model LT70, VIN 456D72412NLA5267, 1 1/2" band, 1 1/4" x 24" wheels, 25 HP electric on saw, meter reads 3917 hours, fully automated

26148
Morbark 48" Chipper
Rebuilt and painted, 3 knife, discharge chute

26149
6' x 6' Chip Shaker Screen
New paint, square hole screen, no power

26150
Vibrating Conveyor
Sawdust screen, drive unit but no power, new paint, 15" pan, 6" sides

26151
Baker 2 Head Resaw
Model BBR-O, serial # 93-481, 20 HP motor on saws, 1" bands, electric drive on feed and return

26152
Buck Saw and Rack
Fec Hydro Sawbuck, 6' saw, 16' log rack

26153
Brewer Double Arbor Gang Saw with Sizer
Model Br8124, serial # 022390RW, double arbor, extra collars, top arbor currently not set up, 30" x 12' power infeed rolls, set up with 11 blades, down and side pressure wheels, 100 HP motors on heads

26154
Hydraulic Pack
15 HP electric motor with 110 V valves

26155
Hydraulic Pack
15 HP electric motor, oil cooler

26156
3 Strand Baker Unscrambler
Bottom deck 6' x 10', top deck 6' x 7', electric drive controls

26157
Manual Sealless Steel Strapping Tool
Model A333, new

26158
Wood-Mizer LT-28 Portable Bandsaw
19 HP Kohler Command engine, hours unknown, 1 1/4" bands, lube tank, manual log turner, power feed, 6' log loading ramps

26159
EZ Boardwalk Bandmill
Model 40, Honda GX630 engine, date mfg. 2015, note reads 213 hours, alternator might not work, 1" x 18" wheels

26160
LT 30 Wood-Mizer Bandmill
Kohler Command 18 HP engine, 1 1/2" bands, saw lube tank, powerfeed, manual log handling, meter reads 3329 hours

26161
Lantech Stretch Wrapping Machine
Automatic, 3'x5'x10' tall, Computer controls, Power roll conveyor with turntable, No motor on turntable

26162
Brewer Double Arbor Gang Saw with Sizer
Model BR9912 MTA, serial # 110906, arbor sleeve saw setup, 100 HP on top arbor, 150 on bottom arbor, 12'' x 7' outfeed belt, approx. 100 blades, 15 HP hydraulic pack, completely refurbished and ready to install

26162A
Timber Buddy XP-380 Thin-Kerf
2" bands, SN-078, Fully hydraulic, 1 3/4"x30" wheels, FPT diesel engine, Smart-set Deluxe setworks, Barksaw, Log-loading arms, Brand-new Machine

26163
Pendu 4200HD Board Stacker
Serial # 9424R00, hydraulic drive, 1st lot of an entirety

26164
Hydraulic Pack For Pendu
25 HP, oil cooler

26165
Entirety Lot # 26163 & 26164
With 10% raise

26166
Simplicity Portable Band Saw
1 1/4" bands, Manual Operation, 21" rubber wheels, No motor, 2 extra wheels, 38"x20' bed

26167
Woodland Mills Portable Band-Mill
Model-HM130, SN- 08052018-4, Made in 2018, Manual operation, Kohler 14 hp motor, Less than 500 hours

26168
ProCut Re-Saw
5 1/2"x10' Feed table, 9 1/2"x10" return belt, No drive, New machine, 6"x12" capacity, Precise thickness adjustment, 1 1/4" bands, 7/8"x28" wheels

26169
ProCut Chop Saw
7"x9" capacity, 22" blade, 8' infeed rolls, 8' outfeed rolls, Material stops, No drive, Manual saw raise, Upcut saw

26170
Baker 3-Head Re-Saw
7/8"x28" wheels, Return belt, 1 1/4" bands, Set up for line shaft drive

26180
Magnum Cheetah Pallet Nailer
3 nailer heads, Nail hoppers, Automatic, Includes automatic stacker

26181
EZ Boardwalk M40 Bandmill
Demo unit with only 100 hours, GX700 Electronic Fuel Injected Engine
• 1 ¼ inch Blade • 40 inch x 16 ½ ft Log Capacity

26201
Handchett Bandsaw Grinder
Serial % 862, size A220, type LH, set up for 8" bands, set up for line shaft or gas motor

26201A
Honda Generator GX390
Condition unknown

26202
8" Bandsaw Blades
5 saws in various condition, 8" used on lot 26203

26203
McDonough 54" Headrick
Topwheel has 13/16" thickness

26204
Hydraulic Pack
20 HP electric, oil cooler, control valve

26205
Gear Box Hydraulic Motor
Skid hydraulic controls on tanks

26206
Tyrone Berry Carriage Drive
Model SMA215E, no motor, hydraulic motor for carriage drive

26207
Cart with Casters
16" x 40", adjustable height

26208
28" Dust Blower
10 HP electric motor, pipe

26209
Porter Belt Conveyor
4" x 11', electric drive, 4" x 36" on side

26210
Belt Conveyor
18" x 6' 6", 12" belt, electric drive

26211
10" Table Saw
Saw guide, power feeder Powermatic, electric motor

26212
Foley Automatic Sharpener and Polisher
Sharpener model 387, polisher model 363, serial # 294, 18" saw polisher

26213
Hydraulic Tank
21" x 21" x 22" on stand

26214
Frick 36" Carriage and Track
Handset, coil spring on recede, cable drum with cable, track frame with track, 34" center to center

26215
Husk with Topsaw
4' x 7' 6", belt drive on top saw, 52" top saw includes line shaft with pulleys

26216
8 Grove Pulley
44", 2 15/16" shaft

26217
6' Head Rig on Slant Sabourn
6' x 11" wheels, 26" x 6' 6" offbear belt, no belt, 15/16" thickness on top wheel

26218
Cleereman Carriage 3 Head Block
Model 40, serial # 40-209, Panagragh, track center to center 58", bottom dog kickers, 16' carriage, 50' track, 16" cable pulley, air setworks with controls

26218A
Tyrone-Berry Carriage Drive
Model-SMA-220, SN-A2684, No motor

26218B
Tyrone-Berry Carriage Feed
No cable on drum

26219
Storage Racks for Metal
2 pieces are 6' x 6' x 138" high, 4" x 4" tubing, 3 shelf 54" deep, 1 piece is 45" x 60" x 9', 2" x 2" tubing

26220
Cutoff Saw
Hanging swing mount, 1- 24" blade, 1- 22" blade

26221
Montgomery Hog 34 HD
No motor, 2 screens, 34" x 18" top opening

26222
Feed Hopper
Fits top of hog lot # 26221

26223
Industrial Resource Hoist
Chain lift with hydraulic motor, for pack break down, self contained hydraulic unit with 5 HP electric motor, 50" x 50" platform with rolls 9' high

26224
3 Strand Transfer
7' x 30', electric drive with cut out

26225
4 Strand Greenchain Rooftop Chain
9' 6" x 26' x 40", electric drive

26226
Hurdle 3 Strand Log Deck
9' x 23', with stop 'n load, Tulsa winch gearbox with hydraulic motor

26227
2 Strand Transfer Deck
4' x 35', rooftop chain, hydraulic drive

26228
Rollcase
28" x 22', 18" x 14' transfer plate, 8 1/2" x 18" rolls, kicker arms, no drive, heavy duty built

26229
Morgan Chopsaw
24" blade, 15' skate roll table, no power, manual operate

26230
Portable Bandsaw
Fully hydraulic, 1" x 26" wheels, 3' x 27' bed, diesel motor

26231
Settertable Bandsaw
44" clamp, 48" x 60" table

26232
Concave Conveyor
15" x 32', chain with paddles, 7.5 HP electric drive, good condition

26233
Shane Mfg. Log Turner
32", hydraulic drive

26234
Belt Conveyor
20" x 48', no drive, 14" belt

26235
56" Saw Blade
F7 style, good saw

26236
Loader Bucket
4' x 8' x 3'

26237
Rollcase
46" x 17', 42" x 4 1/2" rolls, hydraulic drive

26238
SELLS AFTER EDGER Edger Infeed Rolls
41" x 9' x 32" high, 4" x 32" rolls

26239
EFurd Edger
2 saw, sliding arbors, 18" saws, 40 HP electric on saws, control boxes

26240
Edger Tailing Belt
6" x 24', 7" x 11" rolls on end, 5" belt

26241
Edmiston Edger
Model 20" 2 saw, hydraulic blade shift, no power, 36" x 7' infeed, 36" x 8' outfeed

26242
Mellott Vibrating Conveyor
24" x 20', 18" pan, 4" sides, drive unit with electric or hydraulic

26243
Choker Cables
5/8" x 10', new

26244
Manual Sealless Steel Strapping Tool
A333, new

26245
Manual Sealless Steel Strapping Tool
A333, new

26246
Blower
Fan needs replaced, Electric Motor

26247
Wood-Mizer LT30 Portable Sawmill
14 hp Kohler engine, 1"x18 1/2" wheels, 1 1/4" bands, 12V head drive, Good condition, 6'x21' overall

26248
No. 6 Clipper Speed Lacer
SN-1701

26249
Bearings and Edger Blades
3-16" blades

26250
5 carriage axles

26251
Belt Conveyor
20"x29', no drive, 16" belt

26252
Deutz Diesel & Pendu Double Arbor Gang Saw
Meter reads 4672 hours, Motor number-BF6L513R, Includes Blower, Has sizer head, Includes power feed attachment

26253
Roll of Carriage Cable
Some 7/8" and some 5/8"

26254
Rip-Saw
16" blade, no drive

26255
Line Bar Re-Saw
Electric drive, 5" blade, 4"x44" wheels

26256
Belt Conveyor
No drive, 32"x21'x42" tall, mounted on wheels, 28" belt

26257
Reckart Shaker Screen
5'x5', Hydraulic drive

26258
Belt Conveyor
Hydraulic drive, 26"x24', 23" belt, 6" sides

26259
Vibrating Conveyor
28"x18', 18" pan, 9" sides, 1 side slanted, no drive, includes chipper in-feed

26260
Morbark 3-knife Chipper
SN-839, includes extra knife holders

26261
Phelps 40" Blower
No drive

26262
Wood-Mizer 2" Bandsaw Sharpener
Model-BMS250MU, SN-VMS1552014, Air motor

26263
24" Swing Cut-off Saw
No drive

26264
Chop-Saw
16" blade, Honda TX620 motor, 6' table, Board stops

26265
5-Strand Unscrambler
6'x10'x4' tall, Gearbox but no drive

26266
Belt Conveyor
28"x26', 18" belt, No drive

26267
4 HB Meadows Carriage
Includes 45' track, husk, and Carriage drive, Tracks are 38" center to center, 15' carriage

26268
Bark Saw
Overhead mount, Line shaft drive, Includes mounting bracket

26269
Diesel Tank and PVC pipe
10" PVC pipe

26270
Skate Rolls
18"x18', 2"x15 1/2" rolls

26271
24" Dayton Blower
No drive

26272
40" Blower
20 hp electric motor

26273
Hilton Gang 2-blade Edger
Hydraulic drive, 2 moveable blades, 46"x9' In-feed, No out-feed, 2 lasers included-no wiring

26274
Morbark Chip-Pack
Model-48, SN-W499, 3-knife chipper-no knives, 5x5 Shaker screen, no drive, includes cyclone

26275
Newman 8B Planer
Shop number-6035, no drive

26276
Operators Cab
5'x5'x8' tall, has AC unit, Includes controls for carriage

26277
Reckart Husk
5'x7', Has top saw, 20"x5'6" off bear belt, 50 hp electric motor for top saw, no drive for main saw

26277A
56" Circle Saw
6-7 gauge, 52 teeth, F7 style

26277B
56" Circle Saw
6-7 gauge, 52 teeth, F7 style

26277C
56" Circle Saw
6-7 gauge, 52 teeth, F7 style

26278
Frick Timber Tiger 3 HB Carriage
17' long, Air dogs, Cant kicker, Hydraulic setworks, Computerized set, Self-contained hydraulic unit, model-FD36, SN-045

26279
Carriage Track and Frame
50' long, 50" center to center of tracks

26280
HMC Carriage drive
Includes cable drum, 50 hp electric motor, Model-HD40, SN-46193

26281
Frick Vertical Edger
2 blades-both moveable, 50 hp electric motor, F72 style blades

26282
Chain Type Log Turner
48" turner, Hydraulic drive

26283
Hydraulic Unit
5 hp electric motor

26284
Hydraulic Unit
20 hp electric motor

26285
Electric Motor and Mount
150 hp, 444T frame, 1780 rpm, 3 ph.

26286
Husk
6'x8, 22"x5' off bear belt

26287
Operators Cab
4'6"x5'6"x80" tall, Has AC unit

26288
40 hp Hydraulic Pack

26289
Electric Motor
125 hp, 1760 rpm, 405T frame

26290
Paddle Conveyor
Electric drive, 21"x22', 12" paddle spacing

26291
56" Husk
No drive, 6'x7', 50" blade-F8 style

26292
3 circle saws
50", F8 style

26293
Jackson Lumber Harvester Sawmill Carriage, Track, and Frame
Hydraulic controls, pantograph, 50' track, 4 HB 20' carriage, Hydraulic drive

26294
2-Strand Transfer Deck
6'x24'x4' tall, Stop'N'Load, Pop-Up Log Turner, Hydraulic drive for both

26295
Donaldson Dust Collector
Model-20-5CYC, SN-IG350209, Electric drive

26296
Carriage Cable
5/8" cable, 5 pieces

26297
Diesel Tank and Conveyor Belt
26"x28" tank, 15 1/2" belt in very good condition

26298
Bingham Re-Saw with Return
Electric drive, 12"x7' return belt, 1" saw, 1 1/2"x24" wheels, Includes extra bands

26299
Morgan Re-Saw
1" blade, 24" wheels, Electric drive, Includes extra bands

26300
Portable Scragg Mill
30" P-style blades, Hydraulic feed, PTO drive, 9"PVC dust pipe-14' long, Includes 28" blower, Mill is 21" long

26301
Re-Saw
Honda GX390 motor, 1 1/4" blade, Includes extra bands, 20" wheels

26302
44" Blower
No drive

26303
Air Clutch
18", 4 groove pulley

26304
Cut-Off Saw
No drive, 24" blade, Pedal operated

26305
Double Head Notcher
Electric drive, Chain feed

26306
56" Circle Saw
F8 style

26307
56" Circle Saw
F8 style

26308
56" Circle Saw
B-8-1 style

26309
56" Circle Saw
F8 style

26310
56" Circle Saw
F8 style

26311
56" Circle Saw
F8 style

26312
56" Circle Saw
F8 style

26313
56" Circle Saw
F8 style

26314
Meadows 2-Blade Edger
1 moveable blade, No drive, 35"x80" in-feed, 35"x90" outfeed

26314A
Saw Bits
2 boxes 5/16" Black sweeper

26314B
Saw Bits
BFA9 9/32" Black saw bits, 10 boxes-sell by the box

26314C
Saw Bits
BFA9 9/32" Chrome long sawbits, 10 boxes-sell by the box

26314D
Saw Bits
BFA9 5/16" Chrome long sawbits, 20 boxes-sell by the box

26315
Jockey Grinder
Model-16, Milwaukee motor

26316
FEC Hydro Saw Buck
7' bar, Model-2550, SN-15499, Type-655, 8'x30' overall

26317
Fulghum 6-knife Chipper
Model-54, SN-FI-FIL-501, No drive

26318
Hydraulic Tank
24"x35"x16" tall

26319
Metal Detector Control Box
Model-VLE-450, SN-214008

26320
Bark Auger
16"x24', 12" auger, Hydraulic drive

26321
Belt Conveyor
2'x19'x30" tall, 20" belt, No drive

26322
36" Blower
No drive, Includes jack shaft with 2 hydraulic pumps

26322A
Cornell Slab Saw
30" blade, electric drive, No motor on hydraulics

26323
Belt Conveyor
30"x28'x30" tall, 24" belt, Gearbox set up for line shaft

26323A
Skate Rolls
4-30"x10' sections, 2"x26" rolls

26323B
Bucksaw
Hydraulic motor works good, No bar

26323C
Frick Edger
40"x9' infeed, 40"x9' outfeed, 2 blades-neither is moveable, No drive

26324
Lumber Pack Saw
4'x18' Bed, Shop-built, Moving Sawhead, Stihl Magnum saw

26325
Line Shaft with Pulleys
1 7/8"x36', 2 7/16"x24', 1 7/16"x14', 2"x11'6", 1 15/16"x22' made to mount on plate, All shafts have pulleys and bearings

26326
Operator Cab
4'x5', All controls in cab

26326A
Precision 3-knife Chipper
New knife holders, Model-48-11, SN-C-3132

26326B
Precision 5x5 Shaker Screen
SN-5-2259, No drive, Includes elbow on top

26326C
4' Cyclone
44"x4'

26327
Frick 2-saw Edger
1 moveable blade, no drive, 34"x9' infeed table, 34"x9' outfeed table

26327A
Morbark 34" Blower
Includes hopper and Chip-chute

26328
Belt Conveyor
24"x40', Electric drive, Bolt-on adjustable legs, Like new- never installed

26329
Lewco Rollcase
Model-CDLR511-39-6-150, SN-201256, 46"x12', 2 1/2" rolls, No drive

26329A
Accucut Portable Edger
Works good, Rebuilt in 2021, New hydraulic drive, 30"x40" belt outfeed, 30"x48" belt infeed

26329B
Schutte Hammermill
Model-40-HZF, SN-286, New bearings, 24" blower, 4 extra screens, No collar

26330
3-Strand Transfer Deck
10'x18', Pallet of chain, No drive, No end shafts

26331
Pallet of RBX 81X Chain

26332
Mellot 4-Strand Unscrambler
No drive, 4'6" tall, Good working Condition

26333
3-Strand Transfer Deck
#60 roller chain, 7'x8', No drive

26334
Round Table Collecting Deck
10'x27" tall, Electric drive

26335
Buck Saw
6' saw with support bar

26336
Stacking Rack
7'6"x7'6", On casters, 4 tier stacking rack

26337
DuraTeck Tub Grinder
Model-HD10, SN-18-2-59-0367, Big Bite, Cat diesel motor, Includes extra screen, Unloading Belt Conveyor

26338
3-Strand Transfer Deck
8'x19', Rooftop chain C55B, No shafts on ends

26339
Cut-Off Saw
22" saw, No drive

26340
24" Blower
No drive

26341
Baker Deduster
Hydraulic drive, New sprockets and bearings on drive, New brush

26342
Fromm Seal-less Banding Tool
Model-A333, brand new

26343
Hopper for Hog

26344
Grinder Hog
44", No drive

26345
Meadows Husk
Hydraulic pump, 2'x90", 56" saw, 30" top saw, SN-3D-0052-98, 40 hp electric motor for top saw

26346
4-Strand Unscrambler
52"x10', Fire damage

26347
3-Strand Transfer Deck
9'x17', No drive

26348
Pallet Nailer
Automated, 8' wide, Includes box of nails and extra parts

26349
Cyclone
5'x6', Includes dust pipe

26350
Morbark Electric Motor
50 hp, on mount with 2 pump mounts

26351
Skate Rolls
26"x10',

26352
Rollcase
2'x8'6", no drive

26353
56" Circle Saw
6-8 gauge, F8 style, Good condition, Carbide teeth

26354
56" Circle Saw
6-7 gauge, Carbide teeth, F7 style, Good condition

26355
2-Blade Edger
1 moveable blade, No drive, 40"x7' infeed, 40"x5' outfeed

26356
Pulley with Hook

26357
3/4" Cable

26358
Concave Belt Conveyor
12"x22'6", Electric drive

26359
Fuel Tank
4' diameter, 68" tall

26360
Straight-line Ripsaw
12" blade, No drive, Includes extra 16" blades

26361
Cutoff Slab Saw
24" blade, 5 hp Honda GX630 Motor, 16"x10' belt,

26362
Concave Belt Conveyor
23"x23', No drive

26363
Runaround system for Resaw
3'x4' deck, 16"x20' Rollcase, 53"x9' deck, 26"x9' belt conveyor, no drive

26364
Log Turner
36", Hydraulic drive

26365
Chipmaster 6-knife Chipper
Model-48, SN-66262, No drive

26366
Corley 5-Strand Unscrambler
58"x14', SN-LU-033, Gearbox but no motor

26367
48" brush
No drive

26368
Carriage Drive
Drum, No motor

26369
2 Belt Conveyors
1st is 28"x19', Cleated belt, Electric drive, 2nd is 2'x12', No drive

26370
Barn Sweep
77"x26' to incline sweep, 19' incline, Electric drive

26371
Go-Fast Deduster
Double brush, Hydraulic drive, Charge controller

26372
Skate Rolls
18"x10', Adjustable legs, 2" rolls

26373
Whirlwind Up-Cut Saw
Control boxes included, Air stops, Electric drive, 7"x5' belt outfeed

26374
Morgan Single Head Notcher
Hydraulic drive, Manual feed

26375
Stair Crosswalk
33"x6' open underneath, 24" wide

26376
Chopsaw
Hand Controls, 24" blade, 12"x11' rollcase infeed, 12"x8' rollcase outfeed

26377
Morgan Re-Saw
No drive, 1"x24" wheels, No band, 6"x13' belt conveyor feed, 6"x80" return belt, Good condition

26378
Frick 3 HB Carriage and Track
Handset carriage, Model- 1215C, No drive, 4'x13', Track is 3'x45'-in 3 pieces

26379
60" Husk
Wooden frame, Holds up to 60" Saw, 4'x7', 2 7/16"x10'6" mandrel shaft

26380
3-Strand Log Deck with Stop'N'Load
Hydraulic drive with Tulsa gearbox, 4' arms on Stop'N'Load, 10'x35'x52" tall

26381
Lumber Stacking Rack
4'x4'x4' tall stacking capacity

26382
Mellot Husk
Hydraulic drive included, 9'x10', 2 15/16" mandrel shaft

26383
56" Circle Saw
6-7 gauge, 52 teeth, Good condition

26384
Wood-Mizer LT30 Portable Sawmill
SN-07872966AC, Honda GX620 motor, 1 1/4" bands, 18 1/2" band wheels, 6'x20' overall

26385
Landing Table
32"x36" table top, Adjustable legs

26386
Edmiston 2-blade Edger
Hydraulic drive, 41"x10' infeed, no outfeed, 6'x15'x5' tall overall, 2 moveable blades

26387
Lumber Tiger Re-Saw
36" band wheels, 1 1/4" bands, Hydraulic drive, SN-LTPR11807001, 6'x8'x80" tall overall

26388
Operators Cab
4'x54"x7' tall, Completely stripped on inside

26389
Pallet of Carriage Parts
Axles, Handset controls, Bearings

26390
Edger
No drive, No blades, 3'x80" infeed, 3'x10' outfeed, 4'x21'x4' tall overall

26391
2-Blade Edger
1 moveable blade, No drive, 40"x80" infeed, 45"x8' outfeed

26392
3 HB Carriage
In 2 pieces, 64"x17' together, Air powered dogs, Electric drive

26393
Carriage Tracks
NO FRAME INCLUDED, Approximately 128' total

26394
AG Trucut 4 HB Carriage
5'x13'x7' tall, Hydraulic dogs, Hydraulic setworks, In good condition, Comes with Pantagraph

26395
Box of Carriage Parts
Wheels, Saw guide, Pulleys

26396
36" Blower
15 hp electric motor, Fan direct mount on motor

26397
36" Blower
15 hp electric motor, Fan direct mount on motor

26398
Carolina 36" Blower
Model-356HD, SN-B1321T, No drive

26399
Rollcase
5'x13', 4 1/4" rolls, Electric drive

26400
Electric Motor
75 hp, 365T frame, 1770 rpm, 13 1/2" pulley

26401
Chain Paddle Conveyor
14"x30', 10" pan, 6" sides, 10" paddles, No drive

26402
Michael Weining Profile Grinder
Model-R929, Machine #-929-808, 6" grinding wheel

26403
Metal Racking
54"x12'6"x8' tall, 4 shelves

26404
2-Blade Edger
1 moveable blade, 27"x8' infeed, 27"x7' outfeed, No drive

26405
Bucksaw with Rack
5' bar, 8'x26' rack

26406
Montgomery Blo-Hog
12"x26" top opening, SN-962, Model-1340S315F26HDL, No drive, 39" Blower

26406A
CAT 600 ft. lb. Torque Wrench
SN-5523

26407
Skate Rolls
2-2'x10' sections, 2"x20" rolls

26408
Bruning and Federle 33" Blower
20 hp electric motor

26409
Electric Motor
125 hp, 445T frame, 3 ph., 1190 rpm

26410
Morgan Re-Saw
SN-1214001516, No drive, 8"x13' feed belt, 12"x7' return belt, 1" bands, 23" wheels

26410A
2" Bandsaw Blades
10 new blades, Ripper Smicksburg Blades

26410B
Baker Re-Saw Wheels
1"x28" wheels, 4" arbor

26410C
Cooks Band Sharpener
Gear box but no motor

26411
3-Ton Chain Hoist
10" dust pipe, 10"x15" Chip-Chute elbow

26412
Electrical boxes and Motors
Skid of good parts, Electric motors, Gear boxes, Electrical Panels, Start buttons

26413
Skid of Pulleys

26414
Electric Motor
50 hp, 365U frame, 1745 rpm

26415
Hydraulic Packs, Gear boxes, and Electric Motors
1.5 hp hydraulic pack, 10 hp hydraulic pack, 3hp motor, 10 hp motor

26416
Fork Platform
4'x9'x4' tall, Extendable

26417
Belt Conveyor
20"x12'6", 10" belt, No drive

26418
Manual Sealless Steel Strapping Tool
Brand new, Model-A333

26419
Lumber Stacking Sticks
3/4"x1 1/2"x44" long, Approximately 900/bundle, 2 bundles

26420
Gear Boxes

26420A
1/2" Plastic Banding
5 rolls

26421
Belt Conveyor
66"x18', 5' belt, No drive

26422
Baker Re-Saw Parts
2'x4' belt, No drive

26422A
4-Strand Transfer Deck
9'x18'x64" tall, No drive, Steel C-channel catwalk in between strands

26423
2-Strand Transfer Deck with Stop'N'Load
6'x20', Electric drive

26424
LaRos Belt Conveyor
Model-E-510-36-120, SN- E-5103069-055699, 2- 42"x10' sections, 35" belt, No drive

26425
Jeffrey Hammer Hog
SN-11979, Top opening is 21"x33", Bottom discharge, No drive, Includes 35"x55"x60" tall Hopper

26426
Belt Conveyor
66"x18', No belt, No drive, 66"x6' add-on

26428
Timber Harvester Portable Band Sawmill
Model-30M, SN- 2H0403968, 29 hp Vanguard engine, Manual Mill, 1 1/4" bands, 1"x18 1/2" wheels, 7'x28' overall

26429
Soft Cut Chop Saw
3-18" blades included, 20"x8' skate roll feed

26430
IMC Straight Line Rip Saw
Model-JRG-14, PTO drive no shaft, Hydraulic drive on feed

26431
Pro Edge 5-Strand Unscrambler
8'x11' on slant, No drive

26432
Baker 2-Strand Transfer Deck with Stop'N'Load
6'x16', Hydraulic drive

26433
Newman KM-16 5-head Trim Saw
18" blades, 12" dust belt, Electric drive, Includes 5 extra blades

26434
4-Strand Unscrambler
Electric drive, 8'x9'x5' tall

26435
3-Strand Transfer Deck
Electric drive, 9'x10'x58" tall

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Jan 1
Des Arc, AR


Oct 1
Middlebury, IN



Sponsored Links

Air Works Consignment Sawmill Ring

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
8076 Sr 241
Millersburg, IN 44654
Sale Dates and Times
Thursday Feb 17, 2022 Completed
Friday Feb 18, 2022 Completed
Sale Terms and Conditions

There is a 10% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (Additional 3% CC fee will be charged for CC payments). All items are pick-up only. Loadout terms: Monday, Tuesday and Wednesday 8am-4pm- any items left will be sold or disposed of by auction company.
All items must be removed within 7 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.


 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
    1. Online Bids. Online bids may not be reduced or retracted.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  1.  
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.



 
Listing Details
Annual Air Works Consignment Auction. Looking for a good lineup of sawmill and pallet related items. All items are pick-up only. Payment terms: Cash, check, wire transfer, or any major credit card. (Additional 3% CC fee will be charged for CC payments). All items are pick-up only. Loadout terms: Monday, Tuesday and Wednesday 8am-4pm- any items left will be sold or disposed of by auction company.
All items must be removed within 7 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

00
Information Lot
Annual Air Works Consignment Auction. Looking for a good lineup of sawmill and pallet related items. Call Eugene at 260.350.8953 for more information.

26001
Napa 10 HP Air Compressor
Pump # 1312100837, serial # 112514-7727

26002
Air Tank
24" x 6'

26002B
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

26002A
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

26003
Mellott 3 Strand Log Deck with Stop and Load
10' x 17' with steel structure on one end only, no drive

26004
1999 Mellott Rosserhead Debarker
Item #200, Type 11, serial # 99200393, includes cab and controls, 30 HP electric on head

26005
Cornell Barn Sweep That Was Underneath Debarker
42" x 24' with additional, 34' on incline, electric drive

26006
Log Trough with Kickers
33" x 45' with 12" chain, hydraulic drive

26007
3 Strand Log Deck
10' x 25' with 5' steel structure

26008
30" Chain Turner
Hydraulic drive

26009
36" Edmiston's 4 HB Carriage
14' 6" carriage, 34 1/4" center to center of track x 48' long, includes cab, controls, feed, drive, track, and frame

26010
Subframe for Carriage

26011
Steps

26012
5 HP Hydraulic Pack

26013
Hydraulic Reservoir

26014
Hydraulic Valves

26015
Roll Case with Transfer
40" x 37' x 48" high, 10" x 30" rolls, 2" shaft, 31" roll spacing, electric drive

26016
Roll Case
33" x 15' x 8' x 50" high

26017
Roll Case
33" x 15' x 8' x 50" high

26018
Vibrating Conveyor
34" x 40' x 25" high, 24" pan, 8" sides, electric drive, infeed for chipper

26019
Patz Barn Sweep

26020
5 Strand Transfer Deck
10' x 15'6" x 48" high, H 78 B rooftop chain, electric drive

26021
Patz Barn Sweep

26022
Belt Conveyor
8', no belt

26023
Belt Conveyor
25" x 30' x 30" high, with 16" belt, electric drive, 5" sides

26024
M.A. Ward Outfeed for Edger SELLS AFTER EDGER LOT 26032
53" x 24' x 49" high, no drive

26025
Barn Sweep Drive

26026
Lumber Cart

26027
Lumber Cart

26028
Lumber Cart

26029
Lumber Carts
Total of 2

26030
Lumber Carts
Total of 2

26031
Infeed for Edger SELLS AFTER EDGER LOT 26032

53" x 10' x 36" high, 8 1/2" x 47" rolls, does not have drive chain on rolls, air jump chain that is hydraulic drive

26032
Frick 4 Blade Edger

No. 84836, 8" x 48", 26" blades, 1 moveable blade, no drive, includes laser frame but no lasers are installed

26033
125 HP Lincoln Electric Motor
405T frame, 1770 RPM, was used for edger

26034
26" Edger Blades
5 1/4" arbor, 8 total

26035
4 Strand Green Chain
10' x 60' x 36" high, electric drive

26036
Lumber Carts
Total of 2

26037
Lumber Carts
Total of 2

26038
Lumber Carts
Total of 2

26039
48" Precision Chipper
6 knife, no drive

26040
Electric Motor
100 HP, frame 444D

26041
Precision Chip Screen
6' x 6', 1 3/4" screen

26042
24" Blower
Electric drive

26043
5' Cyclone

26044
Belt Conveyor
24" x 7', no drive, 16" belt

26045
Belt Conveyor
26" x 11', 24" belt, no drive

26046
Cyclone
5' x 10', with mounting frame

26047
Hydraulic Pack
10 HP electric, with mounting frame

26048
Slab Saw
Predator 670cc gas engine, 28" sawblade, belt drive power feed, 19" x 8' infeed belt

26049
Steel Banding Cart
crimping tool, roll of 1 1/4" steel banding

26050
10 Ton Chain Hoist and Trolley

26051
Dust Cyclone
8' x 16" with mounting frame, adapter for 20" pipe

26052
P+H Heavy Lift
Control wire

26053
Stretch Wrapping Machine
31" x 10' infeed and outfeed, Trackside Mfg., 24" belt, no power

26054
Morgan Single Head Resaw
24" wheels, cant return belt, 1 1/4 blade

26055
Door Machine

26054A
BrushMaster Chipper Shredder
Model-CH3, 11 hp gas motor, 2-way feed, Portable

26055
Baker Single Head Resaw with Return
Model BBR-O, serial # 93-587, 3/4" x 28" bandwheels, 1 1/4" bands, 20 HP electric motor, electric control board

26055A
Baker Transfer Belt
24" x 4' 6", electric drive

26055B
Baker Transfer Belt
24" x 4' 6", no drive

26055C
Manual Sealless Strapping Tool
Model A333, 1/2" 5/8" or 3/4" banding, new in box, Fromm knockoff

26056
Dust Cyclone
4' x 8'

26057
Air Compressor
On vertical tank

26058
Dust Blower Rogerair
48", 50 HP electric

26059
Dust Cyclone
4' x 10'

26060
Notcher
Adjustable width, no motor on head, 12" wide head, hydraulic drive on feed

26061
Campbell Hausfield Air Compressor
5 HP electric, on vertical tank

26062
2 Strand Log Deck
5' 6" x 26' with 4' skid with stop 'n load, hydraulic drive

26063
Rollcase
5" x 33" rolls, 13' long

26064
I Beam Frame
5' x 7' x 42" steel frame

26065
Slab Rack
4' x 6' x 4' high

26066
Steel Frame
5" x 5" tubing, 5' x 7' x 3' high

26067
Rollcase
26" x 12' 6", 4 1/2" x 21" rolls, no drive

26068
Cutoff Saw
18" blade, no power, sliding table with stop

26069
6 Strand Unscrambler
14' x 7' high, Ligna Machinery, hydraulic drive, electric solenoid valves

26070
HMC Trim Saw
Model ET10, serial # 276-91, 2 saws 1 moving, self contained hydraulic unit for moving saw, 30" blades direct mounted on electric motor, has set works, 22" x 22' dust conveyor with 16" belt

26071
Valley Machine 4" x 30" Edger
Model BAB, serial # 02008A2, 32" x 9' infeed with board guide, 32" x 8' outfeed, 2 moving saws hydraulic powered, 24" x 20" x 20" hydraulic tank on stand, 16" split saws, 2 laser lights, 5 extra saws, feed rolls show some wear

26072
Schuttle Buffalo Hammer Mill
Model 1320, serial # 04.04.076, 3600 RPM, 12 1/2" wide screen, 3 screens, 40 HP electric motor

26073
Fulghum Chip Shaker Screen
Model 5x5 rotor, serial # F1-R-447, 2 HP electric motor

26074
Meadows 3 Saw Edger
4" x 36", 2 moving saws, 16" split saws, 9 extra saws, 36" x 8' infeed, 36" x 7' outfeed, hydraulic blade adjust, hydraulic drive on saws

26075
3 Strand Transfer Deck
6' x 17' x 34", gearbox, no motor

26076
Air Tank
Approx. 250 gallon

26077
Air Tank
Approx. 75 gallon

26078
Cornell Dust Blower
20", no motor

26079
36" Log Turner
Chain type, hydraulic drive

26080
Cyclone
4' x 10', mounting frame, pipe with elbow

26081
Keim Dust Blower
26", no motor

26081A
Morbark Vibrating Conveyor
25" x 18', 18" pan, 6" sides, chipper feed chute, drive unit but no motor

26082
Frick Husk Frame
New mandrel and bearings, 18" x 5' off bearer belt, no pulley, heavy duty frame, good condition

26083
54" Circular Saw
50 tooth, RH600

26084
Cyclone
8' x 13', includes mounting frame

26085
Metal Dust Bin
8' x 8' x 14', includes mounting frame

26086
Cyclone and Pipe
44" x 12', mounting frame for top of lot 26085, all pipe

26087
Steel Dip Tank
5' x 5' x 20', no liner, good condition

26088
Poly Septic Tank
1500 gal.

26089
Slanted Slab Pen
5' x 14' x 6'

26090
Hazeldene 4 Strand Unscrambler
Model U165

26091
Webster Vibrating Conveyor
33" x 16', 21" pan, 16" sides, no drive, has some new parts

26092
Concave Belt Conveyor
16" x 16' with electric drive, 16" x 15' with hydraulic drive

26093
3 Strand Transfer Deck
9' x 18' x 43", no drive, cant stop

26094
5 Groove V- Belts
3 pc. 8V1800, brand new

26095
Scissor Lift Table
46" x 66", electric

26096
Belt Conveyor
34" x 112", no drive

26097
Scissor Lift Table
69" x 100", hydraulic unit with electric

26098
Belt Conveyor
28" x 30", adjustable legs, 6" x 24" rolls, no belt, hydraulic drive

26099
Clary Sidewinder Pallet Dismantler
Serial # 334 48, 77" x 84" table, 6' saw opening, 2" x 30" wheels, 1 1/4'' metal cutting blade, electric drive

26100
Morgan Board Deduster
Serial # 072597095, electric drive, works as it should

26101
Concave Belt Conveyor
12" x 22', hydraulic drive

26102
Morbark Chip Blower
30" Blower, 15 HP electric motor, 10' pipe

26103
Dust Blower
18'' no drive

26104
Morbark Chip-Pac
Model 48, serial # 958, 6 x 6 shaker screen, hydraulic motor on shaker, no drive on chipper, includes extra knives

26105

26106
Mellott Chain Log Turner
48", new lift cylinder, hydraulic drive with controls, good condition

26107
Montgomery Hydraulic Pack
No drive, good condition

26108
Carrier Vibrating Conveyor
Model BM-0805, serial # 19976 LK6819, 39" pan, 8" sides, 45" x 34' plus 5' fiberglass section, electric drive, good condition, metal detector

26109
EZ Slab Cutting Chop Saw
Model Hershberger Mfg., date 2019, automated chop saw lines shaft ready, 20" x 8' infeed belt, 22" x 8' incline outfeed, everything runs off one motor, 30" blade

26110
4 Strand Transfer
9' 6" x 64", adjustable height, #80 roller chain, no drive

26111
28" Blower
No drive

26112
Cornell Gang Saw
Model 621-S, serial # 115-9-87, control box, extra head for sizer, double arbor, top arbor has cant sizer

26113
Dresser Gear Box
Model 120-DU, serial # 410778, ratio 99.44

26114
Waechter Double Head Resaw
1" x 20" wheel, 1" bands, slatbed feed, 7 1/2 HP electric on heads, hydraulic infeed, self contained hydraulic unit, control box, air cylinder down pressure, hydraulic motor on each wheel

26115
Concave Belt Conveyor
16" x 5', hydraulic drive

26116
Hydraulic Pumps
Jack shaft with 2 pumps

26117
Hydraulic Pump
Jack shaft with pump and pulley

26118
Quincy Air Compressor
Model 3701S 106, serial # 20071217-0041

26119
11 KW Lima Generator
Serial AD 149725 CPB, 1800 RPM, on mount

26120
Heat Unit
14" x 14" x 56", engine exhaust heat diverter

26121
Hydraulic Tank Wall Mount
20" x 42" x 24" high

26122
Greenchain Shaft with Sprockets
2 1/8" shaft 10' 6" long, 1 15/16" shaft 10' long, for green chain

26123
Line Shaft
2 7/16" x 16' shaft with pulleys and bearings, 1 15/16" x 20" jack shaft with pulleys and bearings, 2 15/16" x 52" shaft with pulleys and bearings

26124
Concave Belt Conveyor
16" x 32', 15" belt, hydraulic drive

26125
Belt Conveyor
24" x 11', no drive

26126
Whirlwind Chop Saw
Model 2121, serial # 2594M81L, 18" x 8' infeed rolls, upcut saw

26127
Rotary Car Lift
Model E-106, 20" x 6' press platform, track mount, hydraulic powered

26128
Electric Motor
50 HP, 326T frame, 1780 RPM, 2 1/8" shaft

26129
Morbark Electric Motor
Model SF4P100T6TY, 100 HP, 1785 RPM, frame 405T, 2 7/8" shaft

26130
Single Head Notcher
Hand feed, electric motor

26131
Lumber Racks
3' x 4' x 3' high + 40" extensions, 2 sets

26132
Sliding Table Saw
4' x 12' table, overhead sliding saw, 15" blade, electric motor, chain drive on saw movement

26133
Shop Built Scragg Mill
4- 30" blades, no motor on saws, hydraulic drive on feed, no feed chain

26134
Single Head Notcher
Manual feed, no motor, extra blade

26135
Rip Saw
Power feed, no motor

26136
Reckart Blower
46", no motor

26137
Kent-Corp Cutoff Saw
5 HP electric, 8' skate rolls

26138
Guarding
Free standing guard, 32" high, 1 pieces 7', 1 piece 3', 3 pieces 3'

26139
Froedge 450R Deduster
Model LBD 450, serial # 237190, electric drive

26140
Belt Conveyor
18" x 11', electric dive

26141
Statson-Ross Straight Line Ripsaw
Web feed bed, electric motor, gang rip saw, power raise and lower

26142
Saw Blades
Assortment of blades

26143
Hud-Son Bandsaw
Farm Boss 36", Vanguard motor, fully hydraulic, on board turner, tapers, 1' x 26" wheels, 36" x 28' bed, 1 1/4" bands, 5 HP electric on hydraulic

26144
Meadows Carriage and Track
15' carriage, 4 headblocks, 2 sets of new Frick air dogs, air tapers, hand set, air motor on Jog and recede, paragraph, not used since rebuilt by McCormick and Sons

26145
Frick Husk with Top Saw
6' mandrel, 30" top saw, 22" x 6' off bearer belt, 30 HP electric on top saw

26146
Dyna Firewood Processor
Model SC-14, serial 18281, mfg. date 9-12, Kohler gas motor on hydraulic, fully hydraulic controls

26147
Wood-Mizer LT 70
Model LT70, VIN 456D72412NLA5267, 1 1/2" band, 1 1/4" x 24" wheels, 25 HP electric on saw, meter reads 3917 hours, fully automated

26148
Morbark 48" Chipper
Rebuilt and painted, 3 knife, discharge chute

26149
6' x 6' Chip Shaker Screen
New paint, square hole screen, no power

26150
Vibrating Conveyor
Sawdust screen, drive unit but no power, new paint, 15" pan, 6" sides

26151
Baker 2 Head Resaw
Model BBR-O, serial # 93-481, 20 HP motor on saws, 1" bands, electric drive on feed and return

26152
Buck Saw and Rack
Fec Hydro Sawbuck, 6' saw, 16' log rack

26153
Brewer Double Arbor Gang Saw with Sizer
Model Br8124, serial # 022390RW, double arbor, extra collars, top arbor currently not set up, 30" x 12' power infeed rolls, set up with 11 blades, down and side pressure wheels, 100 HP motors on heads

26154
Hydraulic Pack
15 HP electric motor with 110 V valves

26155
Hydraulic Pack
15 HP electric motor, oil cooler

26156
3 Strand Baker Unscrambler
Bottom deck 6' x 10', top deck 6' x 7', electric drive controls

26157
Manual Sealless Steel Strapping Tool
Model A333, new

26158
Wood-Mizer LT-28 Portable Bandsaw
19 HP Kohler Command engine, hours unknown, 1 1/4" bands, lube tank, manual log turner, power feed, 6' log loading ramps

26159
EZ Boardwalk Bandmill
Model 40, Honda GX630 engine, date mfg. 2015, note reads 213 hours, alternator might not work, 1" x 18" wheels

26160
LT 30 Wood-Mizer Bandmill
Kohler Command 18 HP engine, 1 1/2" bands, saw lube tank, powerfeed, manual log handling, meter reads 3329 hours

26161
Lantech Stretch Wrapping Machine
Automatic, 3'x5'x10' tall, Computer controls, Power roll conveyor with turntable, No motor on turntable

26162
Brewer Double Arbor Gang Saw with Sizer
Model BR9912 MTA, serial # 110906, arbor sleeve saw setup, 100 HP on top arbor, 150 on bottom arbor, 12'' x 7' outfeed belt, approx. 100 blades, 15 HP hydraulic pack, completely refurbished and ready to install

26162A
Timber Buddy XP-380 Thin-Kerf
2" bands, SN-078, Fully hydraulic, 1 3/4"x30" wheels, FPT diesel engine, Smart-set Deluxe setworks, Barksaw, Log-loading arms, Brand-new Machine

26163
Pendu 4200HD Board Stacker
Serial # 9424R00, hydraulic drive, 1st lot of an entirety

26164
Hydraulic Pack For Pendu
25 HP, oil cooler

26165
Entirety Lot # 26163 & 26164
With 10% raise

26166
Simplicity Portable Band Saw
1 1/4" bands, Manual Operation, 21" rubber wheels, No motor, 2 extra wheels, 38"x20' bed

26167
Woodland Mills Portable Band-Mill
Model-HM130, SN- 08052018-4, Made in 2018, Manual operation, Kohler 14 hp motor, Less than 500 hours

26168
ProCut Re-Saw
5 1/2"x10' Feed table, 9 1/2"x10" return belt, No drive, New machine, 6"x12" capacity, Precise thickness adjustment, 1 1/4" bands, 7/8"x28" wheels

26169
ProCut Chop Saw
7"x9" capacity, 22" blade, 8' infeed rolls, 8' outfeed rolls, Material stops, No drive, Manual saw raise, Upcut saw

26170
Baker 3-Head Re-Saw
7/8"x28" wheels, Return belt, 1 1/4" bands, Set up for line shaft drive

26180
Magnum Cheetah Pallet Nailer
3 nailer heads, Nail hoppers, Automatic, Includes automatic stacker

26181
EZ Boardwalk M40 Bandmill
Demo unit with only 100 hours, GX700 Electronic Fuel Injected Engine
• 1 ¼ inch Blade • 40 inch x 16 ½ ft Log Capacity

26201
Handchett Bandsaw Grinder
Serial % 862, size A220, type LH, set up for 8" bands, set up for line shaft or gas motor

26201A
Honda Generator GX390
Condition unknown

26202
8" Bandsaw Blades
5 saws in various condition, 8" used on lot 26203

26203
McDonough 54" Headrick
Topwheel has 13/16" thickness

26204
Hydraulic Pack
20 HP electric, oil cooler, control valve

26205
Gear Box Hydraulic Motor
Skid hydraulic controls on tanks

26206
Tyrone Berry Carriage Drive
Model SMA215E, no motor, hydraulic motor for carriage drive

26207
Cart with Casters
16" x 40", adjustable height

26208
28" Dust Blower
10 HP electric motor, pipe

26209
Porter Belt Conveyor
4" x 11', electric drive, 4" x 36" on side

26210
Belt Conveyor
18" x 6' 6", 12" belt, electric drive

26211
10" Table Saw
Saw guide, power feeder Powermatic, electric motor

26212
Foley Automatic Sharpener and Polisher
Sharpener model 387, polisher model 363, serial # 294, 18" saw polisher

26213
Hydraulic Tank
21" x 21" x 22" on stand

26214
Frick 36" Carriage and Track
Handset, coil spring on recede, cable drum with cable, track frame with track, 34" center to center

26215
Husk with Topsaw
4' x 7' 6", belt drive on top saw, 52" top saw includes line shaft with pulleys

26216
8 Grove Pulley
44", 2 15/16" shaft

26217
6' Head Rig on Slant Sabourn
6' x 11" wheels, 26" x 6' 6" offbear belt, no belt, 15/16" thickness on top wheel

26218
Cleereman Carriage 3 Head Block
Model 40, serial # 40-209, Panagragh, track center to center 58", bottom dog kickers, 16' carriage, 50' track, 16" cable pulley, air setworks with controls

26218A
Tyrone-Berry Carriage Drive
Model-SMA-220, SN-A2684, No motor

26218B
Tyrone-Berry Carriage Feed
No cable on drum

26219
Storage Racks for Metal
2 pieces are 6' x 6' x 138" high, 4" x 4" tubing, 3 shelf 54" deep, 1 piece is 45" x 60" x 9', 2" x 2" tubing

26220
Cutoff Saw
Hanging swing mount, 1- 24" blade, 1- 22" blade

26221
Montgomery Hog 34 HD
No motor, 2 screens, 34" x 18" top opening

26222
Feed Hopper
Fits top of hog lot # 26221

26223
Industrial Resource Hoist
Chain lift with hydraulic motor, for pack break down, self contained hydraulic unit with 5 HP electric motor, 50" x 50" platform with rolls 9' high

26224
3 Strand Transfer
7' x 30', electric drive with cut out

26225
4 Strand Greenchain Rooftop Chain
9' 6" x 26' x 40", electric drive

26226
Hurdle 3 Strand Log Deck
9' x 23', with stop 'n load, Tulsa winch gearbox with hydraulic motor

26227
2 Strand Transfer Deck
4' x 35', rooftop chain, hydraulic drive

26228
Rollcase
28" x 22', 18" x 14' transfer plate, 8 1/2" x 18" rolls, kicker arms, no drive, heavy duty built

26229
Morgan Chopsaw
24" blade, 15' skate roll table, no power, manual operate

26230
Portable Bandsaw
Fully hydraulic, 1" x 26" wheels, 3' x 27' bed, diesel motor

26231
Settertable Bandsaw
44" clamp, 48" x 60" table

26232
Concave Conveyor
15" x 32', chain with paddles, 7.5 HP electric drive, good condition

26233
Shane Mfg. Log Turner
32", hydraulic drive

26234
Belt Conveyor
20" x 48', no drive, 14" belt

26235
56" Saw Blade
F7 style, good saw

26236
Loader Bucket
4' x 8' x 3'

26237
Rollcase
46" x 17', 42" x 4 1/2" rolls, hydraulic drive

26238
SELLS AFTER EDGER Edger Infeed Rolls
41" x 9' x 32" high, 4" x 32" rolls

26239
EFurd Edger
2 saw, sliding arbors, 18" saws, 40 HP electric on saws, control boxes

26240
Edger Tailing Belt
6" x 24', 7" x 11" rolls on end, 5" belt

26241
Edmiston Edger
Model 20" 2 saw, hydraulic blade shift, no power, 36" x 7' infeed, 36" x 8' outfeed

26242
Mellott Vibrating Conveyor
24" x 20', 18" pan, 4" sides, drive unit with electric or hydraulic

26243
Choker Cables
5/8" x 10', new

26244
Manual Sealless Steel Strapping Tool
A333, new

26245
Manual Sealless Steel Strapping Tool
A333, new

26246
Blower
Fan needs replaced, Electric Motor

26247
Wood-Mizer LT30 Portable Sawmill
14 hp Kohler engine, 1"x18 1/2" wheels, 1 1/4" bands, 12V head drive, Good condition, 6'x21' overall

26248
No. 6 Clipper Speed Lacer
SN-1701

26249
Bearings and Edger Blades
3-16" blades

26250
5 carriage axles

26251
Belt Conveyor
20"x29', no drive, 16" belt

26252
Deutz Diesel & Pendu Double Arbor Gang Saw
Meter reads 4672 hours, Motor number-BF6L513R, Includes Blower, Has sizer head, Includes power feed attachment

26253
Roll of Carriage Cable
Some 7/8" and some 5/8"

26254
Rip-Saw
16" blade, no drive

26255
Line Bar Re-Saw
Electric drive, 5" blade, 4"x44" wheels

26256
Belt Conveyor
No drive, 32"x21'x42" tall, mounted on wheels, 28" belt

26257
Reckart Shaker Screen
5'x5', Hydraulic drive

26258
Belt Conveyor
Hydraulic drive, 26"x24', 23" belt, 6" sides

26259
Vibrating Conveyor
28"x18', 18" pan, 9" sides, 1 side slanted, no drive, includes chipper in-feed

26260
Morbark 3-knife Chipper
SN-839, includes extra knife holders

26261
Phelps 40" Blower
No drive

26262
Wood-Mizer 2" Bandsaw Sharpener
Model-BMS250MU, SN-VMS1552014, Air motor

26263
24" Swing Cut-off Saw
No drive

26264
Chop-Saw
16" blade, Honda TX620 motor, 6' table, Board stops

26265
5-Strand Unscrambler
6'x10'x4' tall, Gearbox but no drive

26266
Belt Conveyor
28"x26', 18" belt, No drive

26267
4 HB Meadows Carriage
Includes 45' track, husk, and Carriage drive, Tracks are 38" center to center, 15' carriage

26268
Bark Saw
Overhead mount, Line shaft drive, Includes mounting bracket

26269
Diesel Tank and PVC pipe
10" PVC pipe

26270
Skate Rolls
18"x18', 2"x15 1/2" rolls

26271
24" Dayton Blower
No drive

26272
40" Blower
20 hp electric motor

26273
Hilton Gang 2-blade Edger
Hydraulic drive, 2 moveable blades, 46"x9' In-feed, No out-feed, 2 lasers included-no wiring

26274
Morbark Chip-Pack
Model-48, SN-W499, 3-knife chipper-no knives, 5x5 Shaker screen, no drive, includes cyclone

26275
Newman 8B Planer
Shop number-6035, no drive

26276
Operators Cab
5'x5'x8' tall, has AC unit, Includes controls for carriage

26277
Reckart Husk
5'x7', Has top saw, 20"x5'6" off bear belt, 50 hp electric motor for top saw, no drive for main saw

26277A
56" Circle Saw
6-7 gauge, 52 teeth, F7 style

26277B
56" Circle Saw
6-7 gauge, 52 teeth, F7 style

26277C
56" Circle Saw
6-7 gauge, 52 teeth, F7 style

26278
Frick Timber Tiger 3 HB Carriage
17' long, Air dogs, Cant kicker, Hydraulic setworks, Computerized set, Self-contained hydraulic unit, model-FD36, SN-045

26279
Carriage Track and Frame
50' long, 50" center to center of tracks

26280
HMC Carriage drive
Includes cable drum, 50 hp electric motor, Model-HD40, SN-46193

26281
Frick Vertical Edger
2 blades-both moveable, 50 hp electric motor, F72 style blades

26282
Chain Type Log Turner
48" turner, Hydraulic drive

26283
Hydraulic Unit
5 hp electric motor

26284
Hydraulic Unit
20 hp electric motor

26285
Electric Motor and Mount
150 hp, 444T frame, 1780 rpm, 3 ph.

26286
Husk
6'x8, 22"x5' off bear belt

26287
Operators Cab
4'6"x5'6"x80" tall, Has AC unit

26288
40 hp Hydraulic Pack

26289
Electric Motor
125 hp, 1760 rpm, 405T frame

26290
Paddle Conveyor
Electric drive, 21"x22', 12" paddle spacing

26291
56" Husk
No drive, 6'x7', 50" blade-F8 style

26292
3 circle saws
50", F8 style

26293
Jackson Lumber Harvester Sawmill Carriage, Track, and Frame
Hydraulic controls, pantograph, 50' track, 4 HB 20' carriage, Hydraulic drive

26294
2-Strand Transfer Deck
6'x24'x4' tall, Stop'N'Load, Pop-Up Log Turner, Hydraulic drive for both

26295
Donaldson Dust Collector
Model-20-5CYC, SN-IG350209, Electric drive

26296
Carriage Cable
5/8" cable, 5 pieces

26297
Diesel Tank and Conveyor Belt
26"x28" tank, 15 1/2" belt in very good condition

26298
Bingham Re-Saw with Return
Electric drive, 12"x7' return belt, 1" saw, 1 1/2"x24" wheels, Includes extra bands

26299
Morgan Re-Saw
1" blade, 24" wheels, Electric drive, Includes extra bands

26300
Portable Scragg Mill
30" P-style blades, Hydraulic feed, PTO drive, 9"PVC dust pipe-14' long, Includes 28" blower, Mill is 21" long

26301
Re-Saw
Honda GX390 motor, 1 1/4" blade, Includes extra bands, 20" wheels

26302
44" Blower
No drive

26303
Air Clutch
18", 4 groove pulley

26304
Cut-Off Saw
No drive, 24" blade, Pedal operated

26305
Double Head Notcher
Electric drive, Chain feed

26306
56" Circle Saw
F8 style

26307
56" Circle Saw
F8 style

26308
56" Circle Saw
B-8-1 style

26309
56" Circle Saw
F8 style

26310
56" Circle Saw
F8 style

26311
56" Circle Saw
F8 style

26312
56" Circle Saw
F8 style

26313
56" Circle Saw
F8 style

26314
Meadows 2-Blade Edger
1 moveable blade, No drive, 35"x80" in-feed, 35"x90" outfeed

26314A
Saw Bits
2 boxes 5/16" Black sweeper

26314B
Saw Bits
BFA9 9/32" Black saw bits, 10 boxes-sell by the box

26314C
Saw Bits
BFA9 9/32" Chrome long sawbits, 10 boxes-sell by the box

26314D
Saw Bits
BFA9 5/16" Chrome long sawbits, 20 boxes-sell by the box

26315
Jockey Grinder
Model-16, Milwaukee motor

26316
FEC Hydro Saw Buck
7' bar, Model-2550, SN-15499, Type-655, 8'x30' overall

26317
Fulghum 6-knife Chipper
Model-54, SN-FI-FIL-501, No drive

26318
Hydraulic Tank
24"x35"x16" tall

26319
Metal Detector Control Box
Model-VLE-450, SN-214008

26320
Bark Auger
16"x24', 12" auger, Hydraulic drive

26321
Belt Conveyor
2'x19'x30" tall, 20" belt, No drive

26322
36" Blower
No drive, Includes jack shaft with 2 hydraulic pumps

26322A
Cornell Slab Saw
30" blade, electric drive, No motor on hydraulics

26323
Belt Conveyor
30"x28'x30" tall, 24" belt, Gearbox set up for line shaft

26323A
Skate Rolls
4-30"x10' sections, 2"x26" rolls

26323B
Bucksaw
Hydraulic motor works good, No bar

26323C
Frick Edger
40"x9' infeed, 40"x9' outfeed, 2 blades-neither is moveable, No drive

26324
Lumber Pack Saw
4'x18' Bed, Shop-built, Moving Sawhead, Stihl Magnum saw

26325
Line Shaft with Pulleys
1 7/8"x36', 2 7/16"x24', 1 7/16"x14', 2"x11'6", 1 15/16"x22' made to mount on plate, All shafts have pulleys and bearings

26326
Operator Cab
4'x5', All controls in cab

26326A
Precision 3-knife Chipper
New knife holders, Model-48-11, SN-C-3132

26326B
Precision 5x5 Shaker Screen
SN-5-2259, No drive, Includes elbow on top

26326C
4' Cyclone
44"x4'

26327
Frick 2-saw Edger
1 moveable blade, no drive, 34"x9' infeed table, 34"x9' outfeed table

26327A
Morbark 34" Blower
Includes hopper and Chip-chute

26328
Belt Conveyor
24"x40', Electric drive, Bolt-on adjustable legs, Like new- never installed

26329
Lewco Rollcase
Model-CDLR511-39-6-150, SN-201256, 46"x12', 2 1/2" rolls, No drive

26329A
Accucut Portable Edger
Works good, Rebuilt in 2021, New hydraulic drive, 30"x40" belt outfeed, 30"x48" belt infeed

26329B
Schutte Hammermill
Model-40-HZF, SN-286, New bearings, 24" blower, 4 extra screens, No collar

26330
3-Strand Transfer Deck
10'x18', Pallet of chain, No drive, No end shafts

26331
Pallet of RBX 81X Chain

26332
Mellot 4-Strand Unscrambler
No drive, 4'6" tall, Good working Condition

26333
3-Strand Transfer Deck
#60 roller chain, 7'x8', No drive

26334
Round Table Collecting Deck
10'x27" tall, Electric drive

26335
Buck Saw
6' saw with support bar

26336
Stacking Rack
7'6"x7'6", On casters, 4 tier stacking rack

26337
DuraTeck Tub Grinder
Model-HD10, SN-18-2-59-0367, Big Bite, Cat diesel motor, Includes extra screen, Unloading Belt Conveyor

26338
3-Strand Transfer Deck
8'x19', Rooftop chain C55B, No shafts on ends

26339
Cut-Off Saw
22" saw, No drive

26340
24" Blower
No drive

26341
Baker Deduster
Hydraulic drive, New sprockets and bearings on drive, New brush

26342
Fromm Seal-less Banding Tool
Model-A333, brand new

26343
Hopper for Hog

26344
Grinder Hog
44", No drive

26345
Meadows Husk
Hydraulic pump, 2'x90", 56" saw, 30" top saw, SN-3D-0052-98, 40 hp electric motor for top saw

26346
4-Strand Unscrambler
52"x10', Fire damage

26347
3-Strand Transfer Deck
9'x17', No drive

26348
Pallet Nailer
Automated, 8' wide, Includes box of nails and extra parts

26349
Cyclone
5'x6', Includes dust pipe

26350
Morbark Electric Motor
50 hp, on mount with 2 pump mounts

26351
Skate Rolls
26"x10',

26352
Rollcase
2'x8'6", no drive

26353
56" Circle Saw
6-8 gauge, F8 style, Good condition, Carbide teeth

26354
56" Circle Saw
6-7 gauge, Carbide teeth, F7 style, Good condition

26355
2-Blade Edger
1 moveable blade, No drive, 40"x7' infeed, 40"x5' outfeed

26356
Pulley with Hook

26357
3/4" Cable

26358
Concave Belt Conveyor
12"x22'6", Electric drive

26359
Fuel Tank
4' diameter, 68" tall

26360
Straight-line Ripsaw
12" blade, No drive, Includes extra 16" blades

26361
Cutoff Slab Saw
24" blade, 5 hp Honda GX630 Motor, 16"x10' belt,

26362
Concave Belt Conveyor
23"x23', No drive

26363
Runaround system for Resaw
3'x4' deck, 16"x20' Rollcase, 53"x9' deck, 26"x9' belt conveyor, no drive

26364
Log Turner
36", Hydraulic drive

26365
Chipmaster 6-knife Chipper
Model-48, SN-66262, No drive

26366
Corley 5-Strand Unscrambler
58"x14', SN-LU-033, Gearbox but no motor

26367
48" brush
No drive

26368
Carriage Drive
Drum, No motor

26369
2 Belt Conveyors
1st is 28"x19', Cleated belt, Electric drive, 2nd is 2'x12', No drive

26370
Barn Sweep
77"x26' to incline sweep, 19' incline, Electric drive

26371
Go-Fast Deduster
Double brush, Hydraulic drive, Charge controller

26372
Skate Rolls
18"x10', Adjustable legs, 2" rolls

26373
Whirlwind Up-Cut Saw
Control boxes included, Air stops, Electric drive, 7"x5' belt outfeed

26374
Morgan Single Head Notcher
Hydraulic drive, Manual feed

26375
Stair Crosswalk
33"x6' open underneath, 24" wide

26376
Chopsaw
Hand Controls, 24" blade, 12"x11' rollcase infeed, 12"x8' rollcase outfeed

26377
Morgan Re-Saw
No drive, 1"x24" wheels, No band, 6"x13' belt conveyor feed, 6"x80" return belt, Good condition

26378
Frick 3 HB Carriage and Track
Handset carriage, Model- 1215C, No drive, 4'x13', Track is 3'x45'-in 3 pieces

26379
60" Husk
Wooden frame, Holds up to 60" Saw, 4'x7', 2 7/16"x10'6" mandrel shaft

26380
3-Strand Log Deck with Stop'N'Load
Hydraulic drive with Tulsa gearbox, 4' arms on Stop'N'Load, 10'x35'x52" tall

26381
Lumber Stacking Rack
4'x4'x4' tall stacking capacity

26382
Mellot Husk
Hydraulic drive included, 9'x10', 2 15/16" mandrel shaft

26383
56" Circle Saw
6-7 gauge, 52 teeth, Good condition

26384
Wood-Mizer LT30 Portable Sawmill
SN-07872966AC, Honda GX620 motor, 1 1/4" bands, 18 1/2" band wheels, 6'x20' overall

26385
Landing Table
32"x36" table top, Adjustable legs

26386
Edmiston 2-blade Edger
Hydraulic drive, 41"x10' infeed, no outfeed, 6'x15'x5' tall overall, 2 moveable blades

26387
Lumber Tiger Re-Saw
36" band wheels, 1 1/4" bands, Hydraulic drive, SN-LTPR11807001, 6'x8'x80" tall overall

26388
Operators Cab
4'x54"x7' tall, Completely stripped on inside

26389
Pallet of Carriage Parts
Axles, Handset controls, Bearings

26390
Edger
No drive, No blades, 3'x80" infeed, 3'x10' outfeed, 4'x21'x4' tall overall

26391
2-Blade Edger
1 moveable blade, No drive, 40"x80" infeed, 45"x8' outfeed

26392
3 HB Carriage
In 2 pieces, 64"x17' together, Air powered dogs, Electric drive

26393
Carriage Tracks
NO FRAME INCLUDED, Approximately 128' total

26394
AG Trucut 4 HB Carriage
5'x13'x7' tall, Hydraulic dogs, Hydraulic setworks, In good condition, Comes with Pantagraph

26395
Box of Carriage Parts
Wheels, Saw guide, Pulleys

26396
36" Blower
15 hp electric motor, Fan direct mount on motor

26397
36" Blower
15 hp electric motor, Fan direct mount on motor

26398
Carolina 36" Blower
Model-356HD, SN-B1321T, No drive

26399
Rollcase
5'x13', 4 1/4" rolls, Electric drive

26400
Electric Motor
75 hp, 365T frame, 1770 rpm, 13 1/2" pulley

26401
Chain Paddle Conveyor
14"x30', 10" pan, 6" sides, 10" paddles, No drive

26402
Michael Weining Profile Grinder
Model-R929, Machine #-929-808, 6" grinding wheel

26403
Metal Racking
54"x12'6"x8' tall, 4 shelves

26404
2-Blade Edger
1 moveable blade, 27"x8' infeed, 27"x7' outfeed, No drive

26405
Bucksaw with Rack
5' bar, 8'x26' rack

26406
Montgomery Blo-Hog
12"x26" top opening, SN-962, Model-1340S315F26HDL, No drive, 39" Blower

26406A
CAT 600 ft. lb. Torque Wrench
SN-5523

26407
Skate Rolls
2-2'x10' sections, 2"x20" rolls

26408
Bruning and Federle 33" Blower
20 hp electric motor

26409
Electric Motor
125 hp, 445T frame, 3 ph., 1190 rpm

26410
Morgan Re-Saw
SN-1214001516, No drive, 8"x13' feed belt, 12"x7' return belt, 1" bands, 23" wheels

26410A
2" Bandsaw Blades
10 new blades, Ripper Smicksburg Blades

26410B
Baker Re-Saw Wheels
1"x28" wheels, 4" arbor

26410C
Cooks Band Sharpener
Gear box but no motor

26411
3-Ton Chain Hoist
10" dust pipe, 10"x15" Chip-Chute elbow

26412
Electrical boxes and Motors
Skid of good parts, Electric motors, Gear boxes, Electrical Panels, Start buttons

26413
Skid of Pulleys

26414
Electric Motor
50 hp, 365U frame, 1745 rpm

26415
Hydraulic Packs, Gear boxes, and Electric Motors
1.5 hp hydraulic pack, 10 hp hydraulic pack, 3hp motor, 10 hp motor

26416
Fork Platform
4'x9'x4' tall, Extendable

26417
Belt Conveyor
20"x12'6", 10" belt, No drive

26418
Manual Sealless Steel Strapping Tool
Brand new, Model-A333

26419
Lumber Stacking Sticks
3/4"x1 1/2"x44" long, Approximately 900/bundle, 2 bundles

26420
Gear Boxes

26420A
1/2" Plastic Banding
5 rolls

26421
Belt Conveyor
66"x18', 5' belt, No drive

26422
Baker Re-Saw Parts
2'x4' belt, No drive

26422A
4-Strand Transfer Deck
9'x18'x64" tall, No drive, Steel C-channel catwalk in between strands

26423
2-Strand Transfer Deck with Stop'N'Load
6'x20', Electric drive

26424
LaRos Belt Conveyor
Model-E-510-36-120, SN- E-5103069-055699, 2- 42"x10' sections, 35" belt, No drive

26425
Jeffrey Hammer Hog
SN-11979, Top opening is 21"x33", Bottom discharge, No drive, Includes 35"x55"x60" tall Hopper

26426
Belt Conveyor
66"x18', No belt, No drive, 66"x6' add-on

26428
Timber Harvester Portable Band Sawmill
Model-30M, SN- 2H0403968, 29 hp Vanguard engine, Manual Mill, 1 1/4" bands, 1"x18 1/2" wheels, 7'x28' overall

26429
Soft Cut Chop Saw
3-18" blades included, 20"x8' skate roll feed

26430
IMC Straight Line Rip Saw
Model-JRG-14, PTO drive no shaft, Hydraulic drive on feed

26431
Pro Edge 5-Strand Unscrambler
8'x11' on slant, No drive

26432
Baker 2-Strand Transfer Deck with Stop'N'Load
6'x16', Hydraulic drive

26433
Newman KM-16 5-head Trim Saw
18" blades, 12" dust belt, Electric drive, Includes 5 extra blades

26434
4-Strand Unscrambler
Electric drive, 8'x9'x5' tall

26435
3-Strand Transfer Deck
Electric drive, 9'x10'x58" tall

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Air Works Consignment Sawmill Ring
 Live Auction
 
Auction Date(s)
Thursday Feb 17, 2022 Completed
Friday Feb 18, 2022 Completed
Auction Location

Millersburg, IN 44654
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

There is a 10% online buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (Additional 3% CC fee will be charged for CC payments). All items are pick-up only. Loadout terms: Monday, Tuesday and Wednesday 8am-4pm- any items left will be sold or disposed of by auction company.
All items must be removed within 7 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.


 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
    1. Online Bids. Online bids may not be reduced or retracted.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  1.  
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.



 
Annual Air Works Consignment Auction. Looking for a good lineup of sawmill and pallet related items. All items are pick-up only. Payment terms: Cash, check, wire transfer, or any major credit card. (Additional 3% CC fee will be charged for CC payments). All items are pick-up only. Loadout terms: Monday, Tuesday and Wednesday 8am-4pm- any items left will be sold or disposed of by auction company.
All items must be removed within 7 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

00
Information Lot
Annual Air Works Consignment Auction. Looking for a good lineup of sawmill and pallet related items. Call Eugene at 260.350.8953 for more information.

26001
Napa 10 HP Air Compressor
Pump # 1312100837, serial # 112514-7727

26002
Air Tank
24" x 6'

26002B
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

26002A
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding, new in box

26003
Mellott 3 Strand Log Deck with Stop and Load
10' x 17' with steel structure on one end only, no drive

26004
1999 Mellott Rosserhead Debarker
Item #200, Type 11, serial # 99200393, includes cab and controls, 30 HP electric on head

26005
Cornell Barn Sweep That Was Underneath Debarker
42" x 24' with additional, 34' on incline, electric drive

26006
Log Trough with Kickers
33" x 45' with 12" chain, hydraulic drive

26007
3 Strand Log Deck
10' x 25' with 5' steel structure

26008
30" Chain Turner
Hydraulic drive

26009
36" Edmiston's 4 HB Carriage
14' 6" carriage, 34 1/4" center to center of track x 48' long, includes cab, controls, feed, drive, track, and frame

26010
Subframe for Carriage

26011
Steps

26012
5 HP Hydraulic Pack

26013
Hydraulic Reservoir

26014
Hydraulic Valves

26015
Roll Case with Transfer
40" x 37' x 48" high, 10" x 30" rolls, 2" shaft, 31" roll spacing, electric drive

26016
Roll Case
33" x 15' x 8' x 50" high

26017
Roll Case
33" x 15' x 8' x 50" high

26018
Vibrating Conveyor
34" x 40' x 25" high, 24" pan, 8" sides, electric drive, infeed for chipper

26019
Patz Barn Sweep

26020
5 Strand Transfer Deck
10' x 15'6" x 48" high, H 78 B rooftop chain, electric drive

26021
Patz Barn Sweep

26022
Belt Conveyor
8', no belt

26023
Belt Conveyor
25" x 30' x 30" high, with 16" belt, electric drive, 5" sides

26024
M.A. Ward Outfeed for Edger SELLS AFTER EDGER LOT 26032
53" x 24' x 49" high, no drive

26025
Barn Sweep Drive

26026
Lumber Cart

26027
Lumber Cart

26028
Lumber Cart

26029
Lumber Carts
Total of 2

26030
Lumber Carts
Total of 2

26031
Infeed for Edger SELLS AFTER EDGER LOT 26032

53" x 10' x 36" high, 8 1/2" x 47" rolls, does not have drive chain on rolls, air jump chain that is hydraulic drive

26032
Frick 4 Blade Edger

No. 84836, 8" x 48", 26" blades, 1 moveable blade, no drive, includes laser frame but no lasers are installed

26033
125 HP Lincoln Electric Motor
405T frame, 1770 RPM, was used for edger

26034
26" Edger Blades
5 1/4" arbor, 8 total

26035
4 Strand Green Chain
10' x 60' x 36" high, electric drive

26036
Lumber Carts
Total of 2

26037
Lumber Carts
Total of 2

26038
Lumber Carts
Total of 2

26039
48" Precision Chipper
6 knife, no drive

26040
Electric Motor
100 HP, frame 444D

26041
Precision Chip Screen
6' x 6', 1 3/4" screen

26042
24" Blower
Electric drive

26043
5' Cyclone

26044
Belt Conveyor
24" x 7', no drive, 16" belt

26045
Belt Conveyor
26" x 11', 24" belt, no drive

26046
Cyclone
5' x 10', with mounting frame

26047
Hydraulic Pack
10 HP electric, with mounting frame

26048
Slab Saw
Predator 670cc gas engine, 28" sawblade, belt drive power feed, 19" x 8' infeed belt

26049
Steel Banding Cart
crimping tool, roll of 1 1/4" steel banding

26050
10 Ton Chain Hoist and Trolley

26051
Dust Cyclone
8' x 16" with mounting frame, adapter for 20" pipe

26052
P+H Heavy Lift
Control wire

26053
Stretch Wrapping Machine
31" x 10' infeed and outfeed, Trackside Mfg., 24" belt, no power

26054
Morgan Single Head Resaw
24" wheels, cant return belt, 1 1/4 blade

26055
Door Machine

26054A
BrushMaster Chipper Shredder
Model-CH3, 11 hp gas motor, 2-way feed, Portable

26055
Baker Single Head Resaw with Return
Model BBR-O, serial # 93-587, 3/4" x 28" bandwheels, 1 1/4" bands, 20 HP electric motor, electric control board

26055A
Baker Transfer Belt
24" x 4' 6", electric drive

26055B
Baker Transfer Belt
24" x 4' 6", no drive

26055C
Manual Sealless Strapping Tool
Model A333, 1/2" 5/8" or 3/4" banding, new in box, Fromm knockoff

26056
Dust Cyclone
4' x 8'

26057
Air Compressor
On vertical tank

26058
Dust Blower Rogerair
48", 50 HP electric

26059
Dust Cyclone
4' x 10'

26060
Notcher
Adjustable width, no motor on head, 12" wide head, hydraulic drive on feed

26061
Campbell Hausfield Air Compressor
5 HP electric, on vertical tank

26062
2 Strand Log Deck
5' 6" x 26' with 4' skid with stop 'n load, hydraulic drive

26063
Rollcase
5" x 33" rolls, 13' long

26064
I Beam Frame
5' x 7' x 42" steel frame

26065
Slab Rack
4' x 6' x 4' high

26066
Steel Frame
5" x 5" tubing, 5' x 7' x 3' high

26067
Rollcase
26" x 12' 6", 4 1/2" x 21" rolls, no drive

26068
Cutoff Saw
18" blade, no power, sliding table with stop

26069
6 Strand Unscrambler
14' x 7' high, Ligna Machinery, hydraulic drive, electric solenoid valves

26070
HMC Trim Saw
Model ET10, serial # 276-91, 2 saws 1 moving, self contained hydraulic unit for moving saw, 30" blades direct mounted on electric motor, has set works, 22" x 22' dust conveyor with 16" belt

26071
Valley Machine 4" x 30" Edger
Model BAB, serial # 02008A2, 32" x 9' infeed with board guide, 32" x 8' outfeed, 2 moving saws hydraulic powered, 24" x 20" x 20" hydraulic tank on stand, 16" split saws, 2 laser lights, 5 extra saws, feed rolls show some wear

26072
Schuttle Buffalo Hammer Mill
Model 1320, serial # 04.04.076, 3600 RPM, 12 1/2" wide screen, 3 screens, 40 HP electric motor

26073
Fulghum Chip Shaker Screen
Model 5x5 rotor, serial # F1-R-447, 2 HP electric motor

26074
Meadows 3 Saw Edger
4" x 36", 2 moving saws, 16" split saws, 9 extra saws, 36" x 8' infeed, 36" x 7' outfeed, hydraulic blade adjust, hydraulic drive on saws

26075
3 Strand Transfer Deck
6' x 17' x 34", gearbox, no motor

26076
Air Tank
Approx. 250 gallon

26077
Air Tank
Approx. 75 gallon

26078
Cornell Dust Blower
20", no motor

26079
36" Log Turner
Chain type, hydraulic drive

26080
Cyclone
4' x 10', mounting frame, pipe with elbow

26081
Keim Dust Blower
26", no motor

26081A
Morbark Vibrating Conveyor
25" x 18', 18" pan, 6" sides, chipper feed chute, drive unit but no motor

26082
Frick Husk Frame
New mandrel and bearings, 18" x 5' off bearer belt, no pulley, heavy duty frame, good condition

26083
54" Circular Saw
50 tooth, RH600

26084
Cyclone
8' x 13', includes mounting frame

26085
Metal Dust Bin
8' x 8' x 14', includes mounting frame

26086
Cyclone and Pipe
44" x 12', mounting frame for top of lot 26085, all pipe

26087
Steel Dip Tank
5' x 5' x 20', no liner, good condition

26088
Poly Septic Tank
1500 gal.

26089
Slanted Slab Pen
5' x 14' x 6'

26090
Hazeldene 4 Strand Unscrambler
Model U165

26091
Webster Vibrating Conveyor
33" x 16', 21" pan, 16" sides, no drive, has some new parts

26092
Concave Belt Conveyor
16" x 16' with electric drive, 16" x 15' with hydraulic drive

26093
3 Strand Transfer Deck
9' x 18' x 43", no drive, cant stop

26094
5 Groove V- Belts
3 pc. 8V1800, brand new

26095
Scissor Lift Table
46" x 66", electric

26096
Belt Conveyor
34" x 112", no drive

26097
Scissor Lift Table
69" x 100", hydraulic unit with electric

26098
Belt Conveyor
28" x 30", adjustable legs, 6" x 24" rolls, no belt, hydraulic drive

26099
Clary Sidewinder Pallet Dismantler
Serial # 334 48, 77" x 84" table, 6' saw opening, 2" x 30" wheels, 1 1/4'' metal cutting blade, electric drive

26100
Morgan Board Deduster
Serial # 072597095, electric drive, works as it should

26101
Concave Belt Conveyor
12" x 22', hydraulic drive

26102
Morbark Chip Blower
30" Blower, 15 HP electric motor, 10' pipe

26103
Dust Blower
18'' no drive

26104
Morbark Chip-Pac
Model 48, serial # 958, 6 x 6 shaker screen, hydraulic motor on shaker, no drive on chipper, includes extra knives

26105

26106
Mellott Chain Log Turner
48", new lift cylinder, hydraulic drive with controls, good condition

26107
Montgomery Hydraulic Pack
No drive, good condition

26108
Carrier Vibrating Conveyor
Model BM-0805, serial # 19976 LK6819, 39" pan, 8" sides, 45" x 34' plus 5' fiberglass section, electric drive, good condition, metal detector

26109
EZ Slab Cutting Chop Saw
Model Hershberger Mfg., date 2019, automated chop saw lines shaft ready, 20" x 8' infeed belt, 22" x 8' incline outfeed, everything runs off one motor, 30" blade

26110
4 Strand Transfer
9' 6" x 64", adjustable height, #80 roller chain, no drive

26111
28" Blower
No drive

26112
Cornell Gang Saw
Model 621-S, serial # 115-9-87, control box, extra head for sizer, double arbor, top arbor has cant sizer

26113
Dresser Gear Box
Model 120-DU, serial # 410778, ratio 99.44

26114
Waechter Double Head Resaw
1" x 20" wheel, 1" bands, slatbed feed, 7 1/2 HP electric on heads, hydraulic infeed, self contained hydraulic unit, control box, air cylinder down pressure, hydraulic motor on each wheel

26115
Concave Belt Conveyor
16" x 5', hydraulic drive

26116
Hydraulic Pumps
Jack shaft with 2 pumps

26117
Hydraulic Pump
Jack shaft with pump and pulley

26118
Quincy Air Compressor
Model 3701S 106, serial # 20071217-0041

26119
11 KW Lima Generator
Serial AD 149725 CPB, 1800 RPM, on mount

26120
Heat Unit
14" x 14" x 56", engine exhaust heat diverter

26121
Hydraulic Tank Wall Mount
20" x 42" x 24" high

26122
Greenchain Shaft with Sprockets
2 1/8" shaft 10' 6" long, 1 15/16" shaft 10' long, for green chain

26123
Line Shaft
2 7/16" x 16' shaft with pulleys and bearings, 1 15/16" x 20" jack shaft with pulleys and bearings, 2 15/16" x 52" shaft with pulleys and bearings

26124
Concave Belt Conveyor
16" x 32', 15" belt, hydraulic drive

26125
Belt Conveyor
24" x 11', no drive

26126
Whirlwind Chop Saw
Model 2121, serial # 2594M81L, 18" x 8' infeed rolls, upcut saw

26127
Rotary Car Lift
Model E-106, 20" x 6' press platform, track mount, hydraulic powered

26128
Electric Motor
50 HP, 326T frame, 1780 RPM, 2 1/8" shaft

26129
Morbark Electric Motor
Model SF4P100T6TY, 100 HP, 1785 RPM, frame 405T, 2 7/8" shaft

26130
Single Head Notcher
Hand feed, electric motor

26131
Lumber Racks
3' x 4' x 3' high + 40" extensions, 2 sets

26132
Sliding Table Saw
4' x 12' table, overhead sliding saw, 15" blade, electric motor, chain drive on saw movement

26133
Shop Built Scragg Mill
4- 30" blades, no motor on saws, hydraulic drive on feed, no feed chain

26134
Single Head Notcher
Manual feed, no motor, extra blade

26135
Rip Saw
Power feed, no motor

26136
Reckart Blower
46", no motor

26137
Kent-Corp Cutoff Saw
5 HP electric, 8' skate rolls

26138
Guarding
Free standing guard, 32" high, 1 pieces 7', 1 piece 3', 3 pieces 3'

26139
Froedge 450R Deduster
Model LBD 450, serial # 237190, electric drive

26140
Belt Conveyor
18" x 11', electric dive

26141
Statson-Ross Straight Line Ripsaw
Web feed bed, electric motor, gang rip saw, power raise and lower

26142
Saw Blades
Assortment of blades

26143
Hud-Son Bandsaw
Farm Boss 36", Vanguard motor, fully hydraulic, on board turner, tapers, 1' x 26" wheels, 36" x 28' bed, 1 1/4" bands, 5 HP electric on hydraulic

26144
Meadows Carriage and Track
15' carriage, 4 headblocks, 2 sets of new Frick air dogs, air tapers, hand set, air motor on Jog and recede, paragraph, not used since rebuilt by McCormick and Sons

26145
Frick Husk with Top Saw
6' mandrel, 30" top saw, 22" x 6' off bearer belt, 30 HP electric on top saw

26146
Dyna Firewood Processor
Model SC-14, serial 18281, mfg. date 9-12, Kohler gas motor on hydraulic, fully hydraulic controls

26147
Wood-Mizer LT 70
Model LT70, VIN 456D72412NLA5267, 1 1/2" band, 1 1/4" x 24" wheels, 25 HP electric on saw, meter reads 3917 hours, fully automated

26148
Morbark 48" Chipper
Rebuilt and painted, 3 knife, discharge chute

26149
6' x 6' Chip Shaker Screen
New paint, square hole screen, no power

26150
Vibrating Conveyor
Sawdust screen, drive unit but no power, new paint, 15" pan, 6" sides

26151
Baker 2 Head Resaw
Model BBR-O, serial # 93-481, 20 HP motor on saws, 1" bands, electric drive on feed and return

26152
Buck Saw and Rack
Fec Hydro Sawbuck, 6' saw, 16' log rack

26153
Brewer Double Arbor Gang Saw with Sizer
Model Br8124, serial # 022390RW, double arbor, extra collars, top arbor currently not set up, 30" x 12' power infeed rolls, set up with 11 blades, down and side pressure wheels, 100 HP motors on heads

26154
Hydraulic Pack
15 HP electric motor with 110 V valves

26155
Hydraulic Pack
15 HP electric motor, oil cooler

26156
3 Strand Baker Unscrambler
Bottom deck 6' x 10', top deck 6' x 7', electric drive controls

26157
Manual Sealless Steel Strapping Tool
Model A333, new

26158
Wood-Mizer LT-28 Portable Bandsaw
19 HP Kohler Command engine, hours unknown, 1 1/4" bands, lube tank, manual log turner, power feed, 6' log loading ramps

26159
EZ Boardwalk Bandmill
Model 40, Honda GX630 engine, date mfg. 2015, note reads 213 hours, alternator might not work, 1" x 18" wheels

26160
LT 30 Wood-Mizer Bandmill
Kohler Command 18 HP engine, 1 1/2" bands, saw lube tank, powerfeed, manual log handling, meter reads 3329 hours

26161
Lantech Stretch Wrapping Machine
Automatic, 3'x5'x10' tall, Computer controls, Power roll conveyor with turntable, No motor on turntable

26162
Brewer Double Arbor Gang Saw with Sizer
Model BR9912 MTA, serial # 110906, arbor sleeve saw setup, 100 HP on top arbor, 150 on bottom arbor, 12'' x 7' outfeed belt, approx. 100 blades, 15 HP hydraulic pack, completely refurbished and ready to install

26162A
Timber Buddy XP-380 Thin-Kerf
2" bands, SN-078, Fully hydraulic, 1 3/4"x30" wheels, FPT diesel engine, Smart-set Deluxe setworks, Barksaw, Log-loading arms, Brand-new Machine

26163
Pendu 4200HD Board Stacker
Serial # 9424R00, hydraulic drive, 1st lot of an entirety

26164
Hydraulic Pack For Pendu
25 HP, oil cooler

26165
Entirety Lot # 26163 & 26164
With 10% raise

26166
Simplicity Portable Band Saw
1 1/4" bands, Manual Operation, 21" rubber wheels, No motor, 2 extra wheels, 38"x20' bed

26167
Woodland Mills Portable Band-Mill
Model-HM130, SN- 08052018-4, Made in 2018, Manual operation, Kohler 14 hp motor, Less than 500 hours

26168
ProCut Re-Saw
5 1/2"x10' Feed table, 9 1/2"x10" return belt, No drive, New machine, 6"x12" capacity, Precise thickness adjustment, 1 1/4" bands, 7/8"x28" wheels

26169
ProCut Chop Saw
7"x9" capacity, 22" blade, 8' infeed rolls, 8' outfeed rolls, Material stops, No drive, Manual saw raise, Upcut saw

26170
Baker 3-Head Re-Saw
7/8"x28" wheels, Return belt, 1 1/4" bands, Set up for line shaft drive

26180
Magnum Cheetah Pallet Nailer
3 nailer heads, Nail hoppers, Automatic, Includes automatic stacker

26181
EZ Boardwalk M40 Bandmill
Demo unit with only 100 hours, GX700 Electronic Fuel Injected Engine
• 1 ¼ inch Blade • 40 inch x 16 ½ ft Log Capacity

26201
Handchett Bandsaw Grinder
Serial % 862, size A220, type LH, set up for 8" bands, set up for line shaft or gas motor

26201A
Honda Generator GX390
Condition unknown

26202
8" Bandsaw Blades
5 saws in various condition, 8" used on lot 26203

26203
McDonough 54" Headrick
Topwheel has 13/16" thickness

26204
Hydraulic Pack
20 HP electric, oil cooler, control valve

26205
Gear Box Hydraulic Motor
Skid hydraulic controls on tanks

26206
Tyrone Berry Carriage Drive
Model SMA215E, no motor, hydraulic motor for carriage drive

26207
Cart with Casters
16" x 40", adjustable height

26208
28" Dust Blower
10 HP electric motor, pipe

26209
Porter Belt Conveyor
4" x 11', electric drive, 4" x 36" on side

26210
Belt Conveyor
18" x 6' 6", 12" belt, electric drive

26211
10" Table Saw
Saw guide, power feeder Powermatic, electric motor

26212
Foley Automatic Sharpener and Polisher
Sharpener model 387, polisher model 363, serial # 294, 18" saw polisher

26213
Hydraulic Tank
21" x 21" x 22" on stand

26214
Frick 36" Carriage and Track
Handset, coil spring on recede, cable drum with cable, track frame with track, 34" center to center

26215
Husk with Topsaw
4' x 7' 6", belt drive on top saw, 52" top saw includes line shaft with pulleys

26216
8 Grove Pulley
44", 2 15/16" shaft

26217
6' Head Rig on Slant Sabourn
6' x 11" wheels, 26" x 6' 6" offbear belt, no belt, 15/16" thickness on top wheel

26218
Cleereman Carriage 3 Head Block
Model 40, serial # 40-209, Panagragh, track center to center 58", bottom dog kickers, 16' carriage, 50' track, 16" cable pulley, air setworks with controls

26218A
Tyrone-Berry Carriage Drive
Model-SMA-220, SN-A2684, No motor

26218B
Tyrone-Berry Carriage Feed
No cable on drum

26219
Storage Racks for Metal
2 pieces are 6' x 6' x 138" high, 4" x 4" tubing, 3 shelf 54" deep, 1 piece is 45" x 60" x 9', 2" x 2" tubing

26220
Cutoff Saw
Hanging swing mount, 1- 24" blade, 1- 22" blade

26221
Montgomery Hog 34 HD
No motor, 2 screens, 34" x 18" top opening

26222
Feed Hopper
Fits top of hog lot # 26221

26223
Industrial Resource Hoist
Chain lift with hydraulic motor, for pack break down, self contained hydraulic unit with 5 HP electric motor, 50" x 50" platform with rolls 9' high

26224
3 Strand Transfer
7' x 30', electric drive with cut out

26225
4 Strand Greenchain Rooftop Chain
9' 6" x 26' x 40", electric drive

26226
Hurdle 3 Strand Log Deck
9' x 23', with stop 'n load, Tulsa winch gearbox with hydraulic motor

26227
2 Strand Transfer Deck
4' x 35', rooftop chain, hydraulic drive

26228
Rollcase
28" x 22', 18" x 14' transfer plate, 8 1/2" x 18" rolls, kicker arms, no drive, heavy duty built

26229
Morgan Chopsaw
24" blade, 15' skate roll table, no power, manual operate

26230
Portable Bandsaw
Fully hydraulic, 1" x 26" wheels, 3' x 27' bed, diesel motor

26231
Settertable Bandsaw
44" clamp, 48" x 60" table

26232
Concave Conveyor
15" x 32', chain with paddles, 7.5 HP electric drive, good condition

26233
Shane Mfg. Log Turner
32", hydraulic drive

26234
Belt Conveyor
20" x 48', no drive, 14" belt

26235
56" Saw Blade
F7 style, good saw

26236
Loader Bucket
4' x 8' x 3'

26237
Rollcase
46" x 17', 42" x 4 1/2" rolls, hydraulic drive

26238
SELLS AFTER EDGER Edger Infeed Rolls
41" x 9' x 32" high, 4" x 32" rolls

26239
EFurd Edger
2 saw, sliding arbors, 18" saws, 40 HP electric on saws, control boxes

26240
Edger Tailing Belt
6" x 24', 7" x 11" rolls on end, 5" belt

26241
Edmiston Edger
Model 20" 2 saw, hydraulic blade shift, no power, 36" x 7' infeed, 36" x 8' outfeed

26242
Mellott Vibrating Conveyor
24" x 20', 18" pan, 4" sides, drive unit with electric or hydraulic

26243
Choker Cables
5/8" x 10', new

26244
Manual Sealless Steel Strapping Tool
A333, new

26245
Manual Sealless Steel Strapping Tool
A333, new

26246
Blower
Fan needs replaced, Electric Motor

26247
Wood-Mizer LT30 Portable Sawmill
14 hp Kohler engine, 1"x18 1/2" wheels, 1 1/4" bands, 12V head drive, Good condition, 6'x21' overall

26248
No. 6 Clipper Speed Lacer
SN-1701

26249
Bearings and Edger Blades
3-16" blades

26250
5 carriage axles

26251
Belt Conveyor
20"x29', no drive, 16" belt

26252
Deutz Diesel & Pendu Double Arbor Gang Saw
Meter reads 4672 hours, Motor number-BF6L513R, Includes Blower, Has sizer head, Includes power feed attachment

26253
Roll of Carriage Cable
Some 7/8" and some 5/8"

26254
Rip-Saw
16" blade, no drive

26255
Line Bar Re-Saw
Electric drive, 5" blade, 4"x44" wheels

26256
Belt Conveyor
No drive, 32"x21'x42" tall, mounted on wheels, 28" belt

26257
Reckart Shaker Screen
5'x5', Hydraulic drive

26258
Belt Conveyor
Hydraulic drive, 26"x24', 23" belt, 6" sides

26259
Vibrating Conveyor
28"x18', 18" pan, 9" sides, 1 side slanted, no drive, includes chipper in-feed

26260
Morbark 3-knife Chipper
SN-839, includes extra knife holders

26261
Phelps 40" Blower
No drive

26262
Wood-Mizer 2" Bandsaw Sharpener
Model-BMS250MU, SN-VMS1552014, Air motor

26263
24" Swing Cut-off Saw
No drive

26264
Chop-Saw
16" blade, Honda TX620 motor, 6' table, Board stops

26265
5-Strand Unscrambler
6'x10'x4' tall, Gearbox but no drive

26266
Belt Conveyor
28"x26', 18" belt, No drive

26267
4 HB Meadows Carriage
Includes 45' track, husk, and Carriage drive, Tracks are 38" center to center, 15' carriage

26268
Bark Saw
Overhead mount, Line shaft drive, Includes mounting bracket

26269
Diesel Tank and PVC pipe
10" PVC pipe

26270
Skate Rolls
18"x18', 2"x15 1/2" rolls

26271
24" Dayton Blower
No drive

26272
40" Blower
20 hp electric motor

26273
Hilton Gang 2-blade Edger
Hydraulic drive, 2 moveable blades, 46"x9' In-feed, No out-feed, 2 lasers included-no wiring

26274
Morbark Chip-Pack
Model-48, SN-W499, 3-knife chipper-no knives, 5x5 Shaker screen, no drive, includes cyclone

26275
Newman 8B Planer
Shop number-6035, no drive

26276
Operators Cab
5'x5'x8' tall, has AC unit, Includes controls for carriage

26277
Reckart Husk
5'x7', Has top saw, 20"x5'6" off bear belt, 50 hp electric motor for top saw, no drive for main saw

26277A
56" Circle Saw
6-7 gauge, 52 teeth, F7 style

26277B
56" Circle Saw
6-7 gauge, 52 teeth, F7 style

26277C
56" Circle Saw
6-7 gauge, 52 teeth, F7 style

26278
Frick Timber Tiger 3 HB Carriage
17' long, Air dogs, Cant kicker, Hydraulic setworks, Computerized set, Self-contained hydraulic unit, model-FD36, SN-045

26279
Carriage Track and Frame
50' long, 50" center to center of tracks

26280
HMC Carriage drive
Includes cable drum, 50 hp electric motor, Model-HD40, SN-46193

26281
Frick Vertical Edger
2 blades-both moveable, 50 hp electric motor, F72 style blades

26282
Chain Type Log Turner
48" turner, Hydraulic drive

26283
Hydraulic Unit
5 hp electric motor

26284
Hydraulic Unit
20 hp electric motor

26285
Electric Motor and Mount
150 hp, 444T frame, 1780 rpm, 3 ph.

26286
Husk
6'x8, 22"x5' off bear belt

26287
Operators Cab
4'6"x5'6"x80" tall, Has AC unit

26288
40 hp Hydraulic Pack

26289
Electric Motor
125 hp, 1760 rpm, 405T frame

26290
Paddle Conveyor
Electric drive, 21"x22', 12" paddle spacing

26291
56" Husk
No drive, 6'x7', 50" blade-F8 style

26292
3 circle saws
50", F8 style

26293
Jackson Lumber Harvester Sawmill Carriage, Track, and Frame
Hydraulic controls, pantograph, 50' track, 4 HB 20' carriage, Hydraulic drive

26294
2-Strand Transfer Deck
6'x24'x4' tall, Stop'N'Load, Pop-Up Log Turner, Hydraulic drive for both

26295
Donaldson Dust Collector
Model-20-5CYC, SN-IG350209, Electric drive

26296
Carriage Cable
5/8" cable, 5 pieces

26297
Diesel Tank and Conveyor Belt
26"x28" tank, 15 1/2" belt in very good condition

26298
Bingham Re-Saw with Return
Electric drive, 12"x7' return belt, 1" saw, 1 1/2"x24" wheels, Includes extra bands

26299
Morgan Re-Saw
1" blade, 24" wheels, Electric drive, Includes extra bands

26300
Portable Scragg Mill
30" P-style blades, Hydraulic feed, PTO drive, 9"PVC dust pipe-14' long, Includes 28" blower, Mill is 21" long

26301
Re-Saw
Honda GX390 motor, 1 1/4" blade, Includes extra bands, 20" wheels

26302
44" Blower
No drive

26303
Air Clutch
18", 4 groove pulley

26304
Cut-Off Saw
No drive, 24" blade, Pedal operated

26305
Double Head Notcher
Electric drive, Chain feed

26306
56" Circle Saw
F8 style

26307
56" Circle Saw
F8 style

26308
56" Circle Saw
B-8-1 style

26309
56" Circle Saw
F8 style

26310
56" Circle Saw
F8 style

26311
56" Circle Saw
F8 style

26312
56" Circle Saw
F8 style

26313
56" Circle Saw
F8 style

26314
Meadows 2-Blade Edger
1 moveable blade, No drive, 35"x80" in-feed, 35"x90" outfeed

26314A
Saw Bits
2 boxes 5/16" Black sweeper

26314B
Saw Bits
BFA9 9/32" Black saw bits, 10 boxes-sell by the box

26314C
Saw Bits
BFA9 9/32" Chrome long sawbits, 10 boxes-sell by the box

26314D
Saw Bits
BFA9 5/16" Chrome long sawbits, 20 boxes-sell by the box

26315
Jockey Grinder
Model-16, Milwaukee motor

26316
FEC Hydro Saw Buck
7' bar, Model-2550, SN-15499, Type-655, 8'x30' overall

26317
Fulghum 6-knife Chipper
Model-54, SN-FI-FIL-501, No drive

26318
Hydraulic Tank
24"x35"x16" tall

26319
Metal Detector Control Box
Model-VLE-450, SN-214008

26320
Bark Auger
16"x24', 12" auger, Hydraulic drive

26321
Belt Conveyor
2'x19'x30" tall, 20" belt, No drive

26322
36" Blower
No drive, Includes jack shaft with 2 hydraulic pumps

26322A
Cornell Slab Saw
30" blade, electric drive, No motor on hydraulics

26323
Belt Conveyor
30"x28'x30" tall, 24" belt, Gearbox set up for line shaft

26323A
Skate Rolls
4-30"x10' sections, 2"x26" rolls

26323B
Bucksaw
Hydraulic motor works good, No bar

26323C
Frick Edger
40"x9' infeed, 40"x9' outfeed, 2 blades-neither is moveable, No drive

26324
Lumber Pack Saw
4'x18' Bed, Shop-built, Moving Sawhead, Stihl Magnum saw

26325
Line Shaft with Pulleys
1 7/8"x36', 2 7/16"x24', 1 7/16"x14', 2"x11'6", 1 15/16"x22' made to mount on plate, All shafts have pulleys and bearings

26326
Operator Cab
4'x5', All controls in cab

26326A
Precision 3-knife Chipper
New knife holders, Model-48-11, SN-C-3132

26326B
Precision 5x5 Shaker Screen
SN-5-2259, No drive, Includes elbow on top

26326C
4' Cyclone
44"x4'

26327
Frick 2-saw Edger
1 moveable blade, no drive, 34"x9' infeed table, 34"x9' outfeed table

26327A
Morbark 34" Blower
Includes hopper and Chip-chute

26328
Belt Conveyor
24"x40', Electric drive, Bolt-on adjustable legs, Like new- never installed

26329
Lewco Rollcase
Model-CDLR511-39-6-150, SN-201256, 46"x12', 2 1/2" rolls, No drive

26329A
Accucut Portable Edger
Works good, Rebuilt in 2021, New hydraulic drive, 30"x40" belt outfeed, 30"x48" belt infeed

26329B
Schutte Hammermill
Model-40-HZF, SN-286, New bearings, 24" blower, 4 extra screens, No collar

26330
3-Strand Transfer Deck
10'x18', Pallet of chain, No drive, No end shafts

26331
Pallet of RBX 81X Chain

26332
Mellot 4-Strand Unscrambler
No drive, 4'6" tall, Good working Condition

26333
3-Strand Transfer Deck
#60 roller chain, 7'x8', No drive

26334
Round Table Collecting Deck
10'x27" tall, Electric drive

26335
Buck Saw
6' saw with support bar

26336
Stacking Rack
7'6"x7'6", On casters, 4 tier stacking rack

26337
DuraTeck Tub Grinder
Model-HD10, SN-18-2-59-0367, Big Bite, Cat diesel motor, Includes extra screen, Unloading Belt Conveyor

26338
3-Strand Transfer Deck
8'x19', Rooftop chain C55B, No shafts on ends

26339
Cut-Off Saw
22" saw, No drive

26340
24" Blower
No drive

26341
Baker Deduster
Hydraulic drive, New sprockets and bearings on drive, New brush

26342
Fromm Seal-less Banding Tool
Model-A333, brand new

26343
Hopper for Hog

26344
Grinder Hog
44", No drive

26345
Meadows Husk
Hydraulic pump, 2'x90", 56" saw, 30" top saw, SN-3D-0052-98, 40 hp electric motor for top saw

26346
4-Strand Unscrambler
52"x10', Fire damage

26347
3-Strand Transfer Deck
9'x17', No drive

26348
Pallet Nailer
Automated, 8' wide, Includes box of nails and extra parts

26349
Cyclone
5'x6', Includes dust pipe

26350
Morbark Electric Motor
50 hp, on mount with 2 pump mounts

26351
Skate Rolls
26"x10',

26352
Rollcase
2'x8'6", no drive

26353
56" Circle Saw
6-8 gauge, F8 style, Good condition, Carbide teeth

26354
56" Circle Saw
6-7 gauge, Carbide teeth, F7 style, Good condition

26355
2-Blade Edger
1 moveable blade, No drive, 40"x7' infeed, 40"x5' outfeed

26356
Pulley with Hook

26357
3/4" Cable

26358
Concave Belt Conveyor
12"x22'6", Electric drive

26359
Fuel Tank
4' diameter, 68" tall

26360
Straight-line Ripsaw
12" blade, No drive, Includes extra 16" blades

26361
Cutoff Slab Saw
24" blade, 5 hp Honda GX630 Motor, 16"x10' belt,

26362
Concave Belt Conveyor
23"x23', No drive

26363
Runaround system for Resaw
3'x4' deck, 16"x20' Rollcase, 53"x9' deck, 26"x9' belt conveyor, no drive

26364
Log Turner
36", Hydraulic drive

26365
Chipmaster 6-knife Chipper
Model-48, SN-66262, No drive

26366
Corley 5-Strand Unscrambler
58"x14', SN-LU-033, Gearbox but no motor

26367
48" brush
No drive

26368
Carriage Drive
Drum, No motor

26369
2 Belt Conveyors
1st is 28"x19', Cleated belt, Electric drive, 2nd is 2'x12', No drive

26370
Barn Sweep
77"x26' to incline sweep, 19' incline, Electric drive

26371
Go-Fast Deduster
Double brush, Hydraulic drive, Charge controller

26372
Skate Rolls
18"x10', Adjustable legs, 2" rolls

26373
Whirlwind Up-Cut Saw
Control boxes included, Air stops, Electric drive, 7"x5' belt outfeed

26374
Morgan Single Head Notcher
Hydraulic drive, Manual feed

26375
Stair Crosswalk
33"x6' open underneath, 24" wide

26376
Chopsaw
Hand Controls, 24" blade, 12"x11' rollcase infeed, 12"x8' rollcase outfeed

26377
Morgan Re-Saw
No drive, 1"x24" wheels, No band, 6"x13' belt conveyor feed, 6"x80" return belt, Good condition

26378
Frick 3 HB Carriage and Track
Handset carriage, Model- 1215C, No drive, 4'x13', Track is 3'x45'-in 3 pieces

26379
60" Husk
Wooden frame, Holds up to 60" Saw, 4'x7', 2 7/16"x10'6" mandrel shaft

26380
3-Strand Log Deck with Stop'N'Load
Hydraulic drive with Tulsa gearbox, 4' arms on Stop'N'Load, 10'x35'x52" tall

26381
Lumber Stacking Rack
4'x4'x4' tall stacking capacity

26382
Mellot Husk
Hydraulic drive included, 9'x10', 2 15/16" mandrel shaft

26383
56" Circle Saw
6-7 gauge, 52 teeth, Good condition

26384
Wood-Mizer LT30 Portable Sawmill
SN-07872966AC, Honda GX620 motor, 1 1/4" bands, 18 1/2" band wheels, 6'x20' overall

26385
Landing Table
32"x36" table top, Adjustable legs

26386
Edmiston 2-blade Edger
Hydraulic drive, 41"x10' infeed, no outfeed, 6'x15'x5' tall overall, 2 moveable blades

26387
Lumber Tiger Re-Saw
36" band wheels, 1 1/4" bands, Hydraulic drive, SN-LTPR11807001, 6'x8'x80" tall overall

26388
Operators Cab
4'x54"x7' tall, Completely stripped on inside

26389
Pallet of Carriage Parts
Axles, Handset controls, Bearings

26390
Edger
No drive, No blades, 3'x80" infeed, 3'x10' outfeed, 4'x21'x4' tall overall

26391
2-Blade Edger
1 moveable blade, No drive, 40"x80" infeed, 45"x8' outfeed

26392
3 HB Carriage
In 2 pieces, 64"x17' together, Air powered dogs, Electric drive

26393
Carriage Tracks
NO FRAME INCLUDED, Approximately 128' total

26394
AG Trucut 4 HB Carriage
5'x13'x7' tall, Hydraulic dogs, Hydraulic setworks, In good condition, Comes with Pantagraph

26395
Box of Carriage Parts
Wheels, Saw guide, Pulleys

26396
36" Blower
15 hp electric motor, Fan direct mount on motor

26397
36" Blower
15 hp electric motor, Fan direct mount on motor

26398
Carolina 36" Blower
Model-356HD, SN-B1321T, No drive

26399
Rollcase
5'x13', 4 1/4" rolls, Electric drive

26400
Electric Motor
75 hp, 365T frame, 1770 rpm, 13 1/2" pulley

26401
Chain Paddle Conveyor
14"x30', 10" pan, 6" sides, 10" paddles, No drive

26402
Michael Weining Profile Grinder
Model-R929, Machine #-929-808, 6" grinding wheel

26403
Metal Racking
54"x12'6"x8' tall, 4 shelves

26404
2-Blade Edger
1 moveable blade, 27"x8' infeed, 27"x7' outfeed, No drive

26405
Bucksaw with Rack
5' bar, 8'x26' rack

26406
Montgomery Blo-Hog
12"x26" top opening, SN-962, Model-1340S315F26HDL, No drive, 39" Blower

26406A
CAT 600 ft. lb. Torque Wrench
SN-5523

26407
Skate Rolls
2-2'x10' sections, 2"x20" rolls

26408
Bruning and Federle 33" Blower
20 hp electric motor

26409
Electric Motor
125 hp, 445T frame, 3 ph., 1190 rpm

26410
Morgan Re-Saw
SN-1214001516, No drive, 8"x13' feed belt, 12"x7' return belt, 1" bands, 23" wheels

26410A
2" Bandsaw Blades
10 new blades, Ripper Smicksburg Blades

26410B
Baker Re-Saw Wheels
1"x28" wheels, 4" arbor

26410C
Cooks Band Sharpener
Gear box but no motor

26411
3-Ton Chain Hoist
10" dust pipe, 10"x15" Chip-Chute elbow

26412
Electrical boxes and Motors
Skid of good parts, Electric motors, Gear boxes, Electrical Panels, Start buttons

26413
Skid of Pulleys

26414
Electric Motor
50 hp, 365U frame, 1745 rpm

26415
Hydraulic Packs, Gear boxes, and Electric Motors
1.5 hp hydraulic pack, 10 hp hydraulic pack, 3hp motor, 10 hp motor

26416
Fork Platform
4'x9'x4' tall, Extendable

26417
Belt Conveyor
20"x12'6", 10" belt, No drive

26418
Manual Sealless Steel Strapping Tool
Brand new, Model-A333

26419
Lumber Stacking Sticks
3/4"x1 1/2"x44" long, Approximately 900/bundle, 2 bundles

26420
Gear Boxes

26420A
1/2" Plastic Banding
5 rolls

26421
Belt Conveyor
66"x18', 5' belt, No drive

26422
Baker Re-Saw Parts
2'x4' belt, No drive

26422A
4-Strand Transfer Deck
9'x18'x64" tall, No drive, Steel C-channel catwalk in between strands

26423
2-Strand Transfer Deck with Stop'N'Load
6'x20', Electric drive

26424
LaRos Belt Conveyor
Model-E-510-36-120, SN- E-5103069-055699, 2- 42"x10' sections, 35" belt, No drive

26425
Jeffrey Hammer Hog
SN-11979, Top opening is 21"x33", Bottom discharge, No drive, Includes 35"x55"x60" tall Hopper

26426
Belt Conveyor
66"x18', No belt, No drive, 66"x6' add-on

26428
Timber Harvester Portable Band Sawmill
Model-30M, SN- 2H0403968, 29 hp Vanguard engine, Manual Mill, 1 1/4" bands, 1"x18 1/2" wheels, 7'x28' overall

26429
Soft Cut Chop Saw
3-18" blades included, 20"x8' skate roll feed

26430
IMC Straight Line Rip Saw
Model-JRG-14, PTO drive no shaft, Hydraulic drive on feed

26431
Pro Edge 5-Strand Unscrambler
8'x11' on slant, No drive

26432
Baker 2-Strand Transfer Deck with Stop'N'Load
6'x16', Hydraulic drive

26433
Newman KM-16 5-head Trim Saw
18" blades, 12" dust belt, Electric drive, Includes 5 extra blades

26434
4-Strand Unscrambler
Electric drive, 8'x9'x5' tall

26435
3-Strand Transfer Deck
Electric drive, 9'x10'x58" tall