1

READ AND UNDERSTAND THESE TERMS AND CONDITIONS. Information Lot
READ AND UNDERSTAND THESE TERMS AND CONDITIONS. Information Lot, This is a surplus equipment auction for VA Hardwood Flooring and other of its members.   This is a great opportunity to purchase super nice equipment (most ready to load).  The seller's maintenance crew will be on site to remove equipment and will be happy to give you  a quote on removal.   Call Mark Bear 814-285-7365 for quotes and scheduling  All items must be gone December 21 or forfeited to new land owner. Small items will be loaded "on the house" on Friday the 22 and Sat the 23rd.  After that there will be a charge and there will be charges for removal of equipment.    All items selling as is where is with no expressed or implied warranties of any kind.  All descriptions are consiencely  described but in now way implies warranty or use. 

10

Winston Machinery Incline 5 Strand Transfer Deck Check out lots 10-20
Winston Machinery Incline 5 Strand Transfer Deck Check out lots 10-20, 9' x 13' x 50" high, electric drive, needs sprocket and chain on drive Check out Lots 10-20 they make up a breakdown grading line, 1st lot of an entirety by request ONLY with 10% raise

11

Winston Machinery stick removal Belt Conveyor
Winston Machinery stick removal Belt Conveyor, 21" x 12', 18" belt, no drive

12

Winston Machinery 5 Strand Incline Transfer Deck
Winston Machinery 5 Strand Incline Transfer Deck, 9' x 13' x 50" high, electric drive

13

6 Strand Lumber Grading Chain
6 Strand Lumber Grading Chain, 11' x 15'6" x 32" high, electric drive, C55B rooftop chain

14

Dead Rolls
Dead Rolls, 50" x 26' overall, 4" x 48" rolls, 1 1/4" shaft, 32" roll spacing

15

Winston 6 Strand Unscrambler Machinery
Winston 6 Strand Unscrambler Machinery, 8' x 16' x 5' high, electric drive   NOTE: This unscrambler will also work nicely with Lot 340A the T & S 4' Stacker/Package Maker 

16

Winston Machinery 4 Strand Transfer Deck
Winston Machinery 4 Strand Transfer Deck, 12'8" x 26' x 56" high, electric drive

17

6 Strand Transfer Deck
6 Strand Transfer Deck, 13' x 13' x 48" high, electric drive, popup stops

18

Winston Machinery Belt Conveyor
Winston Machinery Belt Conveyor, 3' x 17'6" x 44" high, 30" belt, electric drive Infeed conveyor to Multi Gang Rip

19

Winston Machinery Roll Case
Winston Machinery Roll Case, 3' x 31' x 42" high, electric drive, 8 1/2" x 24" rolls, 2" shaft, 24" roll spacing

20

Hydraulic Unit
Hydraulic Unit, Tag on motor is missing

20a

* mcc and VFD for Winston system
* mcc and VFD for Winston system, Weg cfw 8vector inverter plus

20b

* CH nema 0 and weg CFW08 plus controls
* CH nema 0 and weg CFW08 plus controls, Last lot of entirety 

20C

*Winston Machine Complete Breakdown Line Infeed to Ripping Line
*Winston Machine Complete Breakdown Line Infeed to Ripping Line, Breakdown hoist with stick removal  landing table and transfer decks stick removal belt. Items 10-20

21

Industrial Upcut Saw
Industrial Upcut Saw, Serial # 501L-9-343885, 14" blade, electric drive Includes Foot Control

22

Industrial Upcut Saw
Industrial Upcut Saw, Serial # 501L-9-343585, 14" blade, electric drive

23

Kiln Carts
Kiln Carts, 6 1/2" x 72", for 1 3/4" rails, 70 total

24

Hasko SR-24 Gang Saw
Hasko SR-24 Gang Saw, Serial # 0133512, 75 HP electric motor, hydraulic powered feed rolls, includes hydraulic pack on top

24A

*New Arbor for Hasko Rip Saw
*New Arbor for Hasko Rip Saw, .

25

Belt Conveyor with 4 Cutoff Saws
Belt Conveyor with 4 Cutoff Saws, 5' x 70' overall, 16" belt, saws have 12" blades, electric drive

26

Hasko Flooring Machine side matcher Feed Table
Hasko Flooring Machine side matcher Feed Table,  13' infeed,    6 grooved spiral feed rolls with top roll indelible feed 10" bed plates  

27

Hasko Matchmaster FSM 4-Sided side matcher
Hasko Matchmaster FSM 4-Sided side matcher, HASKO MATCH MASTER  Side matcher flooring machine Serial # 9715911, 6" capacity, 40 HP electric motors on heads, (16) knife head hydraulic drive feed rolls.    The 75 HP hydraulic power pack not included with this lot is 30A and is the one for this machine includes dust tree. 9" bed plates. Includes console operation controls 

27A

*Matcher and Feed Table Control Panel
*Matcher and Feed Table Control Panel, For Side Matcher and feed table

28

Yates American Profile Grinder
Yates American Profile Grinder, Serial # B-29393

29

Heads for Hasko Side Matcher
Heads for Hasko Side Matcher, Heads for the  side matchers  and end matchers.  head jointing units extra knives  There are thousands of dollars of heads end matching heads, 16 knife and 12 knife planer heads and  side matching pattern  4" mechanic vise 

30

25 HP Hydraulic Pack
25 HP Hydraulic Pack, Was used on lot # 26 and 27

30A

75 HP Hydraulic Power Pack
75 HP Hydraulic Power Pack, For Match Master Side Matcher Feed

30B

Ingersoll-Rand Air Compressor
Ingersoll-Rand Air Compressor, Model 523, serial # 30T280121, 7 1/2 HP electric motor, approx. 200 gallon vertical tank, located on the other side of the wall from lot # 30, marked 91B

31

Waste Conveyor
Waste Conveyor, 10" x 22', 6" belt, 4" sides, electric drive

32

Waste Conveyor
Waste Conveyor, 20" x 55', 4" sides, 16" belt, electric drive

33

Waste Conveyor
Waste Conveyor, 13" x 80', 3" sides, 12" belt, electric drive

34

Waste Conveyor
Waste Conveyor, 17" x 24', 5" sides, 13" belt, electric drive

35

Waste Conveyor
Waste Conveyor, 12" x 15' on incline, additional 10'

36

Waste Conveyor
Waste Conveyor, 14" x 12', 5" sides, 12" belt, electric drive

37

Waste Conveyor
Waste Conveyor, 17 1/2" x 28' x 35" high

38

Cornell Automated Cutoff Saw
Cornell Automated Cutoff Saw, Model SHL, serial # 634-7-85, 24" blade, 15 HP electric motor mounted motor controls, and pedestal control

39

Cornell Waste Conveyor
Cornell Waste Conveyor, 23" x 7', 6" sides, 19" belt, electric drive

40

Waste Conveyor and Metal Detector
Waste Conveyor and Metal Detector, 17" x 17', 4" sides, 12" belt, electric drive with metal detector controls on wall

41

Williams Patent Crusher and Pulveriser
Williams Patent Crusher and Pulveriser, Serial # 20007, 24" x 30" top feed hopper, bottom discharge, swing hammers, does not include electric motor

42

Lincoln Electric Motor
Lincoln Electric Motor, 100 HP, 1785 RPM, 405T frame

42A

*Starter and Disconnect for Hog
*Starter and Disconnect for Hog, 100 HP motor control soft start

43

6" Tailing Belt
6" Tailing Belt, 8" x 26' x 42" high

44

Wooden slat conveyor at chop saws
Wooden slat conveyor at chop saws, 12' x 28' x 60" high, electric drive

45

Crosscut Solutions Upcut Saw
Crosscut Solutions Upcut Saw, Model CS14ML, serial # 060811, 7 1/2 HP

45A

*Control For Upcut Saw
*Control For Upcut Saw,

46

Crosscut Solutions Upcut Saw
Crosscut Solutions Upcut Saw, Model CS14ML, serial # 060810, 7 1/2 HP

46A

*Control For Upcut Saw
*Control For Upcut Saw,

47

Crosscut Solutions Upcut Saw
Crosscut Solutions Upcut Saw, Model CS14ML, serial # 060809, 7 1/2 HP

47A

*Control For Upcut Saw
*Control For Upcut Saw,

48

Crosscut Solutions Upcut Saw
Crosscut Solutions Upcut Saw, Model CS14ML, serial # 060812, 7 1/2 HP

48A

*Control For Upcut Saw
*Control For Upcut Saw,

49

Crosscut Solutions Upcut Saw
Crosscut Solutions Upcut Saw, Model CS14ML, serial # 0603-11, 7 1/2 HP

49A

*Control For Upcut Saw
*Control For Upcut Saw,

50

Wooden board slat conveyor transfer
Wooden board slat conveyor transfer, 5' x 36' x 60" high, electric drive

51

Hasko HSEM-C End Matcher system
Hasko HSEM-C End Matcher system, Serial # 0653308T and serial # 0653308G, 8' x 36', very little use includes dust tree

52

Waste Conveyor
Waste Conveyor, 9" x 26', 4" sides, 6" belt

53

Belt Conveyor with Nesting Stations
Belt Conveyor with Nesting Stations, 14" x 42', 4" sides, 12" belt, electric drive transfers to nesting 6. 7'x 15" nesters. 

54

Belt Conveyor
Belt Conveyor, 51" x 9' x 54" high, electric drive, 30" belt

55

Wooden Conveyor
Wooden Conveyor, 5' x 28' x 50" high

56

Belt Conveyor
Belt Conveyor, 16" x 60' x 32" high, electric drive

57

Nesting station Belt Conveyor
Nesting station Belt Conveyor, 4 7' x 15" nesting bays with feed through belt.  16" x 60' x 32" high, electric drive

58

Wood slat transfer table
Wood slat transfer table, 60" x 24' x 41" high, electric drive.  For finished flooring. 

59

Wooden Board slat transfer conveyor
Wooden Board slat transfer conveyor, 60" x 24' x 41" high, electric drive for finished flooring 

60

Wooden board slat transfer Conveyor
Wooden board slat transfer Conveyor, 60" x 36' x 41" high, electric drive for finished flooring 

61

Wooden board slat transfer Conveyor
Wooden board slat transfer Conveyor, 60" x 36' x 41" high, electric drive. For finished flooring. 

62

Belt Conveyors
Belt Conveyors, 5 conveyors welded together, 6"-16" belts, 20' long, electric drive

63

Banding Machine
Banding Machine, Includes skate rolls, 1/2" plastic banding

63a

4 packing carts
4 packing carts, 4x7 various lengths

64

Pallet of Blades, Motors, Banding Tools, and Miscellaneous Parts
Pallet of Blades, Motors, Banding Tools, and Miscellaneous Parts, Belt fasteners

65

Skids of Parts
Skids of Parts,

66

Landen Strapping Machine
Landen Strapping Machine, Model TPS-2000, 1/2" plastic banding, 3 phase

67

Landen Strapping Machine
Landen Strapping Machine, Model TPS-2000, 1/2" plastic banding, 3 phase

68

Landen Strapping Machine
Landen Strapping Machine, Model TPS-2000, serial # 0000081, 3 phase, not in working order

69

Flexband Plastic Banding
Flexband Plastic Banding, 1/2" wide, 9900' per roll, 19 rolls

70

Wooden Cabinets and All Parts
Wooden Cabinets and All Parts, Lots of brand new parts including: sprockets, chain, bolts, nuts, bushings, fuses, etc.

71

48" Blower
48" Blower, 75 HP electric motor

72

Landen Strapping Machine
Landen Strapping Machine, Model TPS-2000, serial # 1705, 1/2" plastic banding, 3 phase

73

Perske Electric Motor
Perske Electric Motor, 30 HP, 3450 RPM

74

Perske Electric Motor
Perske Electric Motor, 25 HP, 3520 RPM

75

Ingersoll-Rand Air Compressor
Ingersoll-Rand Air Compressor, Model 253, serial # 30T655908

76

Titan Industrial Heavy Duty Shop Press
Titan Industrial Heavy Duty Shop Press, 50 ton capacity

77

30" Patton Fan
30" Patton Fan,

78

Wooden Cabinet and Contents
Wooden Cabinet and Contents, Grease, hydraulic motor, and miscellaneous parts

79

Wooden Cabinet and Contents
Wooden Cabinet and Contents, Cylinders, filters, bushings, bearings, etc.

80

Steel Rack and Contents
Steel Rack and Contents, Electric motor, etc.

81

Yates American C50 Gang Saw
Yates American C50 Gang Saw, Serial # B-21766-R, 12" blades, 60 HP electric motor

82

Cart and Parts for Gang
Cart and Parts for Gang, Spacers, blades, etc., 12" blades, 3 1/2" arbor

83

Wooden Crate filled with Belts
Wooden Crate filled with Belts,

84

Pallet of Bolts, Nuts, and Miscellaneous Parts
Pallet of Bolts, Nuts, and Miscellaneous Parts,

85

Braketron Motor Brake, Electric Motor
Braketron Motor Brake, Electric Motor,

86

Weinig Profimat 22 N 5 Head Moulder
Weinig Profimat 22 N 5 Head Moulder, Model P22N, machine # 226-6988, 9" head, 1 1/2" arbor, 4 sided with dust tree

87

Belt Conveyor
Belt Conveyor, 13" x 19' x 48" high, 3" sides, 12" belt, electric drive

88

Ingersoll-Rand Air Compressor
Ingersoll-Rand Air Compressor, Model # 2525, serial # 6035526, 7 1/2 HP electric motor, approx. 200 gallon vertical tank

89

All Dust Pipe on Inside of Building
All Dust Pipe on Inside of Building, 4"-24" diameter

90

Skid of Belts
Skid of Belts, 4"-49 1/2" wide, various lengths

91

48" Carolina Dust Blower
48" Carolina Dust Blower, W/ 125 hp motor 

91a

*telemecanique Square D
*telemecanique Square D, Ali start 46. 

92

Lincoln Electric Motor
Lincoln Electric Motor, 125 HP, 1785 RPM, 444T frame

93

36" Carolina Blower
36" Carolina Blower, 30 HP electric motor

94

48" Carolina Blower
48" Carolina Blower, No drive

95

Lincoln Electric Motor
Lincoln Electric Motor, 100 HP, 1765 RPM, 405T frame

96

Mac bag house Dust Bin with Air Lock
Mac bag house Dust Bin with Air Lock, 17' diameter x approx. 40' tall, includes structure steel includes bag blow out unit 

97

Cyclone on Top of Tall Concrete Silo
Cyclone on Top of Tall Concrete Silo, Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

98

Cyclone on Top of Short Concrete Silo
Cyclone on Top of Short Concrete Silo, Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

99

Dust Cyclone
Dust Cyclone, 18' diameter x approx. 25' tall, includes structure steel to roof

100

All Dust Pipe on Outside of Building
All Dust Pipe on Outside of Building,

101

1992 Industrial Wood Boiler
1992 Industrial Wood Boiler, Model WWF-690-250, serial # RMP69001, heating surface 4045 sq. foot, includes all parts in boiler  shut down by.boiler company  water treatment steam valves. 

101A

*Silo Unloader
*Silo Unloader, electric drive, in silo behind boiler

102

1972 Cleaver Brooks LP Boiler
1972 Cleaver Brooks LP Boiler, Serial L-54637, model CB100-400, this boiler was in good working condition whey they shut down, includes all parts and accessories for boiler

102A

*Water Conditioner
*Water Conditioner, Was used to treat water going to boiler, 80" x 80" x 100" tall

102B

*Well-X-Trol Pressure Tank
*Well-X-Trol Pressure Tank, Model # WX-302, 24" x 49"

102C

*Inswool Ceramic Fiber Blanket
*Inswool Ceramic Fiber Blanket, 1" thick x 25' long, 7 boxes

103

Steam-Pak LP Boiler
Steam-Pak LP Boiler, Model SPH600-6-116678, serial # 682909H41548, not in working condition

103A

48" Dust Blower
48" Dust Blower, 75 HP electric motor

103B

DeWalt Radial Arm Saw
DeWalt Radial Arm Saw,

103C

*12" Powermatic Tablesaw
*12" Powermatic Tablesaw, Model 72A, serial # 9572014, electric drive

103D

*Walker Turner Drill Press
*Walker Turner Drill Press,

104

Newman S-382 2 Sided Planer
Newman S-382 2 Sided Planer, Serial # 14510, 6" x 30" capacity, spiral cutter heads, 40 HP motor on bottom arbor, 75 HP on top arbor, includes hydraulic pack for feed rolls, 25' infeed, 11' outfeed

105

Mereen-Johnson 424DC Multi Gang Rip Saw
Mereen-Johnson 424DC Multi Gang Rip Saw, Model 424-DC, serial # MJ-4134, top arbor, 12" blades, electric drive, good condition

106

Lumberline Laser System
Lumberline Laser System, 6 lasers, includes steel frame to floor

107

Electric Lift Table
Electric Lift Table, 4' x 8'

108

5 Strand Transfer Deck
5 Strand Transfer Deck, 12'6" x 15' x 34" high, H-78-B rooftop chain, does not include shaft that connects it to lot # 109, no drive

109

5 Strand Transfer Deck
5 Strand Transfer Deck, 11' x 46' x 34" high, electric drive

110

Adjustable Lumber Carts
Adjustable Lumber Carts, 50" x 7', extends to 11'

111

Adjustable Lumber Carts
Adjustable Lumber Carts, 50" x 7', extends to 11'

112

Adjustable Lumber Carts
Adjustable Lumber Carts, 50" x 7', extends to 11'

113

Adjustable Lumber Carts
Adjustable Lumber Carts, 50" x 7', extends to 11'

114

3 Strand Transfer Deck
3 Strand Transfer Deck, 12' x 16', electric drive, 1st lot of an entirety

114A

5 Strand Transfer Deck
5 Strand Transfer Deck, 12' x 10', electric drive

114B

Unscrambler and Transfer Deck After Unscrambler
Unscrambler and Transfer Deck After Unscrambler, 16' wide, electric drive

114C

Entirety Lot # 114-114B
Entirety Lot # 114-114B, With 10% raise

115

Transfer Deck With 8’ Tilt Hoist
Transfer Deck With 8’ Tilt Hoist, 12' x 30', electric drive, 1st lot of an entirety 8' tilt hoist.  

116

15 HP Hydraulic Pack
15 HP Hydraulic Pack, Was used for lot # 115

117

Stick removal Conveyor belt
Stick removal Conveyor belt, 18" x 26', 11" belt, electric drive

118

5 Strand Transfer Deck
5 Strand Transfer Deck, 12' x 12'6", air popup stops, electric drive

119

Cornell Unscrambler
Cornell Unscrambler, 6' x 11', electric drive

120

Grating chain/Infeed for Trim Saw
Grating chain/Infeed for Trim Saw, 10'6" x 30', even end rolls, electric drive

121

Cornell Trim Saw
Cornell Trim Saw, 24" blades, 2 blade, 16' capacity, waste conveyor, electric drive

122

6 Strand Transfer Deck
6 Strand Transfer Deck, 10'3" x 110' x 39" high, electric drive

122A

Entirety Lot 115-122
Entirety Lot 115-122, With 10% raise

122B

600 amp AB Motor Control Center
600 amp AB Motor Control Center, Allen-Bradley Centerline Motor Control Center.  600 amp with Allen Bradley motor control box with operator control over grating chain

122C

Parts for Cornell grate and trim line
Parts for Cornell grate and trim line, 81x repair chain links, 1st aid kits enclosed in locker cabinet

123

Ingersoll-Rand Air Compressor
Ingersoll-Rand Air Compressor, Model 242, serial # 30T861092, 5 HP electric 3 phase motor, approx. 120 gallon vertical tank

124

Transfer Deck With Tilt Hoist
Transfer Deck With Tilt Hoist, 11'6" x 38', electric drive, 1st lot of an entirety

125

4 Strand Transfer Deck going to Drop Rolls
4 Strand Transfer Deck going to Drop Rolls, 12' x 40', air popup stops

126

Waste Conveyor
Waste Conveyor, 14" x 23', 4 sides, 12" belt, electric drive

127

Waste Conveyor
Waste Conveyor, 19" x 18', 4" sides, 12" belt, on incline, electric drive

128

Drop Rolls to put Drying Sticks In
Drop Rolls to put Drying Sticks In, 9' x 17', 8 1/2" x 6'5" rolls, raises up to 18', electric drive

129

Entirety Lot 124-128
Entirety Lot 124-128, With 10% raise

130

Lewco Skate Rolls
Lewco Skate Rolls, 16" x 60'

131

Rack for Drying Sticks
Rack for Drying Sticks, 7' x 8'

132

Cornell Roll Case
Cornell Roll Case, 10' x 95', 8 1/2" x 9' rolls, 28" roll spacing, 2 1/2" shaft, missing 1 roll, the first 20' is live rolls, electric drive

140

CAT 920 Wheel Loader
CAT 920 Wheel Loader, Serial # 62K5626, hours are unavailable, includes 8' pin-on bucket, cab has A/C, CAT engine, runs and operates

141

CAT 950 Wheel Loader
CAT 950 Wheel Loader, Serial # 81J9507, meter reads 6926 hours, includes 86" pin-on grapple attachment, CAT engine, runs and operates

142

CAT V180B Forklift
CAT V180B Forklift, Model V180B, serial # 68Y00956, meter reads 17,337 hours, 6' forks, 7' wide mast, 10'6" tall, CAT engine

143

Hyundai 70D-7E Forklift
Hyundai 70D-7E Forklift, PIN HHKHFZ11PD0002246, truck weight 25,527 lbs., 4' forks, mast 83" wide, 10'6" tall, hours unknown, NO MOTOR OR TRANSMISSION

144

20951 Road Grader
20951 Road Grader, Serial # DV-230895, hours unknown, 12' blade, Cummins diesel engine, runs and operates

145

Cat V330B Forklift
Cat V330B Forklift, Serial # 72Y01429, 33,000 lbs. lift, 13' mast height, Cat engine

146

1998 Ford F-150 Pickup Truck, VIN # 1FTZF1821WNB69120
1998 Ford F-150 Pickup Truck, VIN # 1FTZF1821WNB69120, Year: 1998 Make: Ford Model: F-150 Vehicle Type: Pickup Truck Mileage: meter reads 26,713 miles Plate: Body Type: 2 Door Cab; Regular; Styleside Trim Level: Standard; XL; XLT; Lariat Drive Line: 4WD Engine Type: V6, 4.2L (256 CID); OHV Fuel Type: Gasoline Horsepower: Transmission: VIN #: 1FTZF1821WNB69120 Features and Notes: not currently in working condition

150

Westinghouse Electric Motor
Westinghouse Electric Motor, 7.5 HP, 3 PH, new in the crate

151

Westinghouse Electric Motor
Westinghouse Electric Motor, 5 HP, 3 PH, new in the crate

152

Electric Motors
Electric Motors, 50 HP, 20 HP, 25 HP, condition unknown

153

GE Electric Motor
GE Electric Motor, 75 HP, 3 PH, frame 405TS, loose

154

Schorch Electric Motor
Schorch Electric Motor, 150 HP, 3 PH, frame 445-2, loose

155

Electric Motor
Electric Motor, 150 HP, 3 PH, frame, 445-2, loose

156

Louis Allis Electric Motor
Louis Allis Electric Motor, 150 HP, 3 PH, frame 44TT, loose

157

Electric Motor
Electric Motor, 150 HP, 3 PH

159

40 HP Hydraulic Power Pack
40 HP Hydraulic Power Pack, Includes 3/4 HP electric pump, heat exchanger tank 22 1/2" x 71 1/2" x 31", good condition

160

Whirlwind Upcut Saw
Whirlwind Upcut Saw, Model 1000R, serial # S-3184602R, 12" blade, foot pedal

161

Pallet of No. 78 Chain
Pallet of No. 78 Chain,

162

Gear Drive
Gear Drive, With 5 HP electric drive, on steel frame

163

30 HP Hydraulic Power Pack
30 HP Hydraulic Power Pack, Serial # A-3275-A, 100 gallon tank

164

5 Barrels of Chain
5 Barrels of Chain,

165

2018 Baker Band Resaw
2018 Baker Band Resaw, Model BBR-O"ABX", serial # 18-4878, 2" bands, 28" bandwheels, 40 HP electric drive, 11 1/2" belt, manual, excellent condition

165A

New Resaw Bands For Baker
New Resaw Bands For Baker, Fits lot # 165, 14'2", 18 pieces in box, 2" wide

166

Electric Motor
Electric Motor, 15 HP, 30 HP

167

Armstrong Circle Saw Sharpener
Armstrong Circle Saw Sharpener, Serial # 17400, 1 HP electric drive with control box. Manual

168

Vollmer Grinder
Vollmer Grinder, Fab No. 172, electric drive

169

Pallet of Blades
Pallet of Blades, 24" x 1 1/2" arbor

170

Electrical panel
Electrical panel, Fused disconnect Starter

170A

American Scissor Lift
American Scissor Lift, Model 2JA, serial # 4866-5, 4000 lbs. lift, foot pedal

171

20 HP Ploypac Hydraulic Power Pack
20 HP Ploypac Hydraulic Power Pack, Serial # P87-351, 35 gallon, good condition

172

30 HP Hydraulic Power Pack
30 HP Hydraulic Power Pack, Cooling unit, tank 15" x 72" x 35" high, good condition

173

Gear Reduction Drive
Gear Reduction Drive, 13.6 HP, ratio 15.5

174

Pallet of Sprockets
Pallet of Sprockets, 8"-24"

175

Pallet of Electric Transformers
Pallet of Electric Transformers,

176

Pallet of H130 Chains
Pallet of H130 Chains,

177

Pallet of H130 Chains
Pallet of H130 Chains,

178

Large Box of Oil Filters
Large Box of Oil Filters, Big selection of sizes

179

Cabinet of Cat Parts
Cabinet of Cat Parts,

180

Washer Parts
Washer Parts, 22" x 35" x 35" high, on casters

181

Pallet of H130 Chains
Pallet of H130 Chains,

182

Pallet of H138 Chains
Pallet of H138 Chains,

183

Pallet of WHX124 Rex Chains
Pallet of WHX124 Rex Chains,

184

Pallet of Chains
Pallet of Chains, Several types

185

5 HP Rucker Hydraulic Power Pack
5 HP Rucker Hydraulic Power Pack, Serial # 22331230A, 30 gallon

186

30 HP Ploypac Hydraulic Power Pack
30 HP Ploypac Hydraulic Power Pack, No. P89-462, 90 gallons

187

Inovec Hydraulic Power Pack
Inovec Hydraulic Power Pack, Serial # A3275C, 2- 30 HP, 1- 2 HP electric drives, 150 gallons, good condition

188

Pallet of Rollers
Pallet of Rollers, 8 3/4" x 36" rollers, with bearings, 5 pieces

189

Pallet of Rollers
Pallet of Rollers, 8 3/4" x 30", with bearings, 5 pieces

190

Pallet of H-130 Chains
Pallet of H-130 Chains,

191

Pallet of Rex Log Deck Chains
Pallet of Rex Log Deck Chains,

192

Pallet of Grease Hose Reels
Pallet of Grease Hose Reels, Good condition

193

Pallet of Electric Parts
Pallet of Electric Parts, Conduit, etc.

194

Pallet of FMP Storage Drawers
Pallet of FMP Storage Drawers, Brass fitting, bolts, etc., fully loaded

195

Container of Log Deck Parts
Container of Log Deck Parts,

196

Container of Chains
Container of Chains,

197

Gear Reduction Drive
Gear Reduction Drive, 7.5 electric drive

198

Pallet of H130 Chains
Pallet of H130 Chains, 2 skids

199

36 1/2" Pulley
36 1/2" Pulley, 8 groove, 6 1/2" hub, debarker chain

200

Transformer
Transformer, Single phase, 25 KVA

201

40 HP Hydraulic Power Pack
40 HP Hydraulic Power Pack, Serial # 2536JOB7786, 24" x 59" x 26" high, heat exchanger

202

20 HP Mellott Hydraulic Pack
20 HP Mellott Hydraulic Pack, 12 1/2" x 33" x 36", excellent condition

203

Container of AL1 Chains
Container of AL1 Chains,

204

Pallet of Miscellaneous
Pallet of Miscellaneous, Reduction Gear Drive, line shaft with sprockets

205

Pallet of H130 Chain
Pallet of H130 Chain,

206

Pallet of Log Trough Chain
Pallet of Log Trough Chain, 12" wide

207

Gear Reduction Drives
Gear Reduction Drives, 7 pieces

208

Band-O-Matic Bander
Band-O-Matic Bander, DBI-8160, with 1/2" banding

209

Pallet of Miscellaneous
Pallet of Miscellaneous, Electric motors, 10 HP, 14" saw blades, chains, etc.

210

Pallet of Chains
Pallet of Chains, 30 HP electric motor, chains are used for wooden conveyors

211

48" Box Fan
48" Box Fan, With electric drive

212

25 HP Electric Motor
25 HP Electric Motor, 3 PH, new in crate

213

Wall Vent
Wall Vent, 40" x 40", 2 pieces, new in crate

214

End Matching Chains
End Matching Chains, Used, miscellaneous parts

215

Pallet of Miscellaneous
Pallet of Miscellaneous, Electric motors, gear boxes

216

Pallet of Rollers
Pallet of Rollers, 6 3/4" x 48" rollers (6 pieces), 2 radiators

217

Pallet of Log Trough Chains
Pallet of Log Trough Chains,

218

Square D Electrical Panel
Square D Electrical Panel, With disconnect

219

Log Trough Chain
Log Trough Chain, 11 1/2" wide

220

Log Trough Chain
Log Trough Chain, 6" wide

222

Miscellaneous Box
Miscellaneous Box, Electric boxes, gear drive

223

40 HP Lincoln Electric Motor
40 HP Lincoln Electric Motor, 3 PH, brand new

224

75 HP Electric Motor
75 HP Electric Motor, 3 PH, loose

225

50 HP Electric Motor
50 HP Electric Motor, 3 PH, new in crate

226

Pallet of Pulleys
Pallet of Pulleys, Sprockets, gear drives

226A

20" Blower Fan
20" Blower Fan, New in crate

227

20 HP Hydraulic Power Pack
20 HP Hydraulic Power Pack, With heat exchanger, 24" x 35" x 18"

228

Scissor Lift
Scissor Lift, Needs work

229

Barrel of Chains
Barrel of Chains,

230

Hydraulic Saddle Turner
Hydraulic Saddle Turner, Hydraulic drive, good drive

231

Hydraulic Saddle Turner
Hydraulic Saddle Turner, Hydraulic drive, good drive

232

Pallet of Chains
Pallet of Chains, Gear drives, sprocket

233

Industrial Upcut Saw
Industrial Upcut Saw, Foot pedal, no blade, electric drive

234

Box of Miscellaneous
Box of Miscellaneous, Chains, hydraulic hoses, control box

235

End Matching Chains
End Matching Chains, 3 boxes

236

Pallet of Chains
Pallet of Chains, Used for wooden conveyors

237

Pallet of Chains
Pallet of Chains, Waste Conveyor

238

20 HP Hydraulic Power Pack
20 HP Hydraulic Power Pack, 24" x 35 1/2" x 15" high tank

239

10 HP Hydraulic Power Pack
10 HP Hydraulic Power Pack, with heat exchanger, 20 1/2" x 34" x 19 1/2"

240

Box of Miscellaneous
Box of Miscellaneous,

241

National Vertical Air Tank
National Vertical Air Tank, Serial # 12511

242

Box Miscellaneous
Box Miscellaneous, Cutter heads, chains, dynamitic control box

243

Paddle Waste Conveyor Chains
Paddle Waste Conveyor Chains,

244

2 Pallets of Waste Conveyor Chains
2 Pallets of Waste Conveyor Chains,

245

Saddle Turner
Saddle Turner, Hydraulic drive, good condition

246

Barrel of Chains
Barrel of Chains, 3 barrels

247

Barrel of Chains
Barrel of Chains,

248

Barrel of Chains
Barrel of Chains,

249

Pallet of Chain Sprockets
Pallet of Chain Sprockets, Also has gear reductions

250

Yates Floor End Matching Machine
Yates Floor End Matching Machine, B-26869-R, 5 HP electric drive

251

Yates Floor End Matching Machine
Yates Floor End Matching Machine, B-26869-R, 5 HP electric drive

252

Yates E1 End Matching Machine
Yates E1 End Matching Machine, 4 HP electric drive

253

Yates End Matching Machine
Yates End Matching Machine, B-23800, 4 HP electric drive

254

Yates-American Flooring A23 Side Matcher
Yates-American Flooring A23 Side Matcher, Model A23, serial # B-25902, 4 head, with electric panel

255

Lumber Rack
Lumber Rack, 8 3/4" x 87 1/2" rollers, vertical air tank, live roll case 18" x 8', hydraulic drive

256

Yates-American Flooring A23 Sidematcher
Yates-American Flooring A23 Sidematcher, Model A23, serial # 22990

257

Mattison Straight-line Rip Saw
Mattison Straight-line Rip Saw, Model 202, serial # 14141, table 65 1/2" x 77 1/2"

258

36" Blower
36" Blower, No drive, outlet 22" x 24", inlet 21"

259

36" Blower Fan
36" Blower Fan, 29" x 48" box with miscellaneous parts, seals, sprockets, etc.

260

52" Blower Fan
52" Blower Fan, Hub 2 3/4", good condition

261

52" Blower Fan
52" Blower Fan, Hub 2 3/4", good condition

262

52" Blower Fan
52" Blower Fan, Hub 2 3/4", good condition

263

46" Blower Fan
46" Blower Fan, Hub 2 3/4", 20" wide, good condition

264

34 1/2" Blower Fan
34 1/2" Blower Fan, Hub 2 1/2", 14 3/4" wide, good condition

265

58" Precision Chipper
58" Precision Chipper, Serial # C.3732, 6 knife, very good condition

266

58" Precision Chipper
58" Precision Chipper, Serial # 3769, 6 knife, very good condition

267

Carriage Drum Drive
Carriage Drum Drive, Sits on steel frame 51" x 102", gear is in good condition, motor has fire damage

268

Yates-American G-55 Planer
Yates-American G-55 Planer, serial # B-29894, electric/hydraulic, electric drive

269

24" Cutoff Saw
24" Cutoff Saw, Electric drive, hydraulic controls, 42" x 445" x 67" high

270

Electric Motor
Electric Motor, 125 HP, 3 PH, loose

271

250 HP Electric Motor
250 HP Electric Motor, Frame 447TZ, 3 PH, good condition

271A

250 HP Electric Motor
250 HP Electric Motor, Frame 447TZ, 3 PH, not electrically sound

272

Yates-American G-50 Planer
Yates-American G-50 Planer, Serial # 24399, 50 HP drive

273

Williams Crusher and Pulverizer
Williams Crusher and Pulverizer, Serial # 15456, 75 HP electric drive, top feed, bottom discharge

274

Scanning System
Scanning System,

275

Waste Conveyor Chain
Waste Conveyor Chain,

276

Unscrambler Chain
Unscrambler Chain,

277

Filbert Stowell Band Head Rig
Filbert Stowell Band Head Rig, 31" x 9' off bearing belt, hydraulic strain, 7' bandwheels, 13" wide, 1" meat

279

Oliver Straitoplane
Oliver Straitoplane, Machine No. 170, serial # 96387, 36", electric drive

281

Pallet of Miscellaneous Parts
Pallet of Miscellaneous Parts, Pulleys 5 1/2"-19 1/2"

282

Pallet of Miscellaneous Parts
Pallet of Miscellaneous Parts, Electric motors, Ingersoll-Rand air compressor, gear box

283

Chipper Knives
Chipper Knives, Variety of sizes

284

Pallet of Rollers
Pallet of Rollers, 8 1/2" x 49 3/4" rollers with bearings, 6 pieces

285

Pallet of Shafts
Pallet of Shafts, 59" long

286

Jackson Cochrane Planer
Jackson Cochrane Planer, No. 30, electric drive

287

Electric Panels
Electric Panels,

288

Benshaw Chipper Braking Starter
Benshaw Chipper Braking Starter, 36" x 48"

289

Electrical Panel
Electrical Panel, 48" x 72"

290

Paulson Horizontal Band Mill Diesel Engine
Paulson Horizontal Band Mill Diesel Engine, Fully hydraulic, 36" band wheels, ISUZU diesel engine, 4" band, 36" x 24' deck, log turner, extra bands, meter shows 1559 hours

291

Pallet of Storage Containers
Pallet of Storage Containers, Loaded with bolts, etc.

292

Mattison Straight-line Rip Saw
Mattison Straight-line Rip Saw, No blade, electric drive, 65" x 77 1/2" table

293

Tool Chest
Tool Chest, 13 drawer, 20" x 40"

294

Pallet of Filters
Pallet of Filters, Oil and air

295

Pallet of Chains
Pallet of Chains, Various sizes

296

Pallet of Gear Drives
Pallet of Gear Drives,

297

1 1/4" Metal Banding
1 1/4" Metal Banding, 5 rolls

298

Pallet of Belts
Pallet of Belts, New and used

299

Ridgid 300 Pipe Threader
Ridgid 300 Pipe Threader,

300

Hoses and Sprockets
Hoses and Sprockets, Air, hydraulic hoses

301

Pallet of 12" Sprockets
Pallet of 12" Sprockets,

302

Pallet of Paddle Chains
Pallet of Paddle Chains,

303

Pallet of Hydraulic Cylinders
Pallet of Hydraulic Cylinders,

304

Pallet of Miscellaneous
Pallet of Miscellaneous, Electric motors, gear drives

305

Manual Scissor Lift
Manual Scissor Lift,

306

Pallet of Miscellaneous Parts
Pallet of Miscellaneous Parts, Seals, wire looms, bearings

307

Pallet of Miscellaneous
Pallet of Miscellaneous, Milwaukee bench grinder, air impact, hand fuel pump

308

Grease Hose Reels
Grease Hose Reels,

308d

Kiln components
Kiln 11, 12, 13, 14 with dell computer. Brother printer Variable feed drive

308f

Siemens 400 amp main
Siemens 400 amp main, In kiln 11-14 kiln office includes GE 75 KVA transformer

308g

Kilns 5;6;7. Controls and components
Kilns 5;6;7. Controls and components, three Lignomat. VFD cabinets. PLLC cabinets stripped.  includes doors fans and all interior kiln components

308h

Track kiln components
Track kiln components,

309

Pallet of Rollers
Pallet of Rollers, 8 1/2", 24"-42"

309A

Truck Tire Dolly
Truck Tire Dolly,

309B

PVC Fittings and Radiator
PVC Fittings and Radiator,

309C

Spinks Scale
Spinks Scale,

309D

Liftrite Pallet Jack
Liftrite Pallet Jack, 5500 lb. lift, works

310

Wisconsin Gas Engine
Wisconsin Gas Engine, Model VH40, serial # 5246516

310d

Oahu’s pro scout scales
Oahu’s pro scout scales, With calibration weights

310e

kiln trek kiln components
kiln trek kiln components, Main for kiln controls For 11,12,13 and 14. No controls  includes kiln components. Pipes doors fans vents.   includes dell computer and brother printer only 

311

15 HP Hydraulic Power Pack
15 HP Hydraulic Power Pack, 30" x 60" x 18" high

312

Riding Tennant Sweeper
Riding Tennant Sweeper, Model 6500, serial # 6500-6821, GVW 5200, LP gas engine, meter shows 935 hours, condition unknown

313

ACME 1/2" Plastic Black Banding
ACME 1/2" Plastic Black Banding, 3600 ft. per box, 28 boxes

314

ACME 1/2" Plastic Black Banding
ACME 1/2" Plastic Black Banding, 3600 ft. per box, 18 boxes

315

Gempaint
Gempaint, End paint for dried lumber, heaters, pump included, 4 full barrels, 5 empty

316

Carriage Parts
Carriage Parts,

317

3 Fans on Stands
3 Fans on Stands, 30" and 32"

325

3 Used Tires
3 Used Tires, 2- 20.5-25, 1- 15.5-25

328

ASM Unscrambler
ASM Unscrambler, 10' x 17'6" x 6'4" tall, hydraulic drive 8 strands of welded bar chain

329

Debarker
Debarker, No tag or any info on it, 12' infeed

330

Rack for Drying Sticks
Rack for Drying Sticks, 7' x 8'

330A

Rack for Drying Sticks
Rack for Drying Sticks, 7' x 8'

330B

Rack for Drying Sticks
Rack for Drying Sticks, 7' x 8'

331

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331A

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331B

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331C

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331D

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331E

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331F

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331G

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331H

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331I

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331J

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331K

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331L

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

331M

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

332

Custom Built 4 HB Carriage
Custom Built 4 HB Carriage, 30" x 16' carriage

333

Operator's Cab
Operator's Cab, 4' x 6' x 80" tall, Corley controls, needs glass replaced

334

Carriage Track
Carriage Track, 45" center to center x 48'

334A

Tyrone-Berry Feed and Drive
Tyrone-Berry Feed and Drive, Model SMA-215, serial # A2186, DA-L/M4005. Pump and drum package 

334B

Entirety Lot # 332-334A
Entirety Lot # 332-334A, With 10% raise

335

Angled Spiral Rollcase and Transfer Deck
Angled Spiral Rollcase and Transfer Deck, 68" x 13', transfer going to rolls is 10', electric drive. First of the entirety of the TS manufacturing package maker

336

Spiral Roll Case
Spiral Roll Case, 48" x 15' x 36" high, 9" x 36" rolls, 1 7/8" shaft, 27" roll spacing, every roll has a hydraulic motor. Not part ,Of the entirety 

337

T S Mfg package breakdown hoist
T S Mfg package breakdown hoist, 12'6" wide.  Part of entirety. 337;338;339;335;339;340

338

3 Strand Transfer Deck
3 Strand Transfer Deck, 6' x 11' x 32" high, frame only, electric drive part of the TS Manufacturing  stacking system. 335,337,338,338a,339,340

339

Breakdown hoist
Breakdown hoist, 11'6" x 13'6". With package deck

339a

Package maker stacker lay up table. Part of an entirety. 337;335;339 336:338;340
Package maker stacker lay up table. Part of an entirety. 337;335;339 336:338;340,

340

Transfer Deck
Transfer Deck, 8' wide, 2 sections approx. 24' long

340a

T and S Manufacturing stacking components complete. 4’
T and S Manufacturing stacking components complete. 4’, Includes. 335,337,338,339,340,338a.  T and S stacker package maker. Ready to load seller or TAS have drawings.   job number. 16994, entirety with 10% raise scan 1.pdf Scan_.pdf

340b

Hemco Lumber Sorter Series 43 Dismantled and ready to load
Hemco Lumber Sorter Series 43 Dismantled and ready to load, 24 23 sorts 1 reject  Bay 16'  sorter disassembled and ready to load standard Series 43 Sling Sorter Last Install Job 2745 Controls are available for this traditional sling sorter from USNR   Situated at the Bradford Pa site 444 High Street Bradford PA  

341

5 Strand Transfer Deck
5 Strand Transfer Deck, 7' x 13' x 35" high, hydraulic drive, needs shaft on one end

342

Mellott Vibrating Conveyor
Mellott Vibrating Conveyor, 25" x 60' x 19" high, 19" pan, 4" sides, electric drive

343

Webster Vibrating Conveyor
Webster Vibrating Conveyor, 33" x 12' x 23" high, 24" pan, 6" sides, electric drive

344

Balderson Bucket
Balderson Bucket, 21" center to center of quick attach, 2 1/8" mounting hole, 9' wide, for Cat loader

345

Balderson Bucket
Balderson Bucket, 23" center to center of quick attach, 2" mounting holes, 128" wide, for Cat loader

346

Loader Bucket
Loader Bucket, 28" center to center of quick attach, 1 1/2" mounting hole, 103" wide, for Cat loader

346A

Loader Forks
Loader Forks, 28" center to center of quick attach, 1 1/2" mounting hole, 46" forks, for Cat loader

347

Roll Case
Roll Case, 10' x 15' x 38" high, 8 1/2" x 108" rolls, 30" roll spacing, 2 1/2" shaft, hydraulic drive

348

Dead Rolls
Dead Rolls, 16" x 20', 4" x 12" rolls, 12" roll spacing, 1 1/4" shaft

349

Spiral Roll Case
Spiral Roll Case, 56" x 18' x 46" high, 9" x 42" rolls, 22" roll spacing, 2 3/8" shaft, needs bearings replaced, no drive

350

Roll Case
Roll Case, 41" x 18' x 33" high, 8 1/2" x 30" rolls, 30" roll spacing, 2" shaft, has shaft to mount transfer deck

351

Hanchett knife Sharpener
Hanchett knife Sharpener, Size 38", type DN, shop # 8063

352

Power Transmission
Power Transmission, 5 HP electric motor

353

Overhead Hoist System
Overhead Hoist System, 7' x 11' x 12' tall, 2 ton hoist

354

Mereen-Johnson Gangsaw
Mereen-Johnson Gangsaw, Model 424-DC, serial # MJ5173, for parts or to rebuild

355

Steel Rack and Shafts with Sprockets
Steel Rack and Shafts with Sprockets, 2"-4" shafts, various lengths

356

Coils for Dry Kilns
Coils for Dry Kilns,

356A

*4 Strand Log Deck
*4 Strand Log Deck, 10' 4" x 17', rebuilt with new chain, new bearings, electric drive

357

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

358

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

359

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

360

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

361

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

362

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

363

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

364

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

365

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

366

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

367

Lumber Cart
Lumber Cart, 42" x 84"

368

Lumber Cart
Lumber Cart, 42" x 84"

369

Lumber Cart
Lumber Cart, 42" x 84"

370

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

371

Lumber Cart
Lumber Cart, 42" x 84"

372

Lumber Cart
Lumber Cart, 42" x 84"

373

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

374

Rack for Drying Sticks
Rack for Drying Sticks, 4' x 7'

375

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

375A

*Chain Conveyor
*Chain Conveyor, 18" x 30' x 28" high, electric motor

376

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

378

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

379

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

380

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

404

Vecoplan Electric Panel
30" x 36" x 12" deep

381

Lumber Cart
Lumber Cart, 41" x 96", includes 4 x 4's

382

Lumber Cart
Lumber Cart, 42" x 84"

383

Lumber Cart
Lumber Cart, 42" x 84"

384

Adjustable Lumber Cart
Adjustable Lumber Cart, 42" x 98"

408

Yaskawa V1000 Electrical Switches
27 total V1000 switches, 3- WAGO 787-880 electrical switches, 2- WAGO 787-742 electrical switches, 1- WAGO 787-740 electrical switch

384A

Heat Ducts, Louvers Etc.
Heat Ducts, Louvers Etc.,

385

Electric Motor and Roller
Electric Motor and Roller, Weg motor, 15 hp, 3520 RPM, 16" x 16" roller, Newco 150 steel WCB 77, 4" long 2 1/2" steel bar

386

Ductwork for Electrical Wiring
Ductwork for Electrical Wiring, 6" x 6" ducts, 30' of ducts

386A

Rack for Drying Sticks
Rack for Drying Sticks, 7' x 8'

387

ACME Saw Sharpener
ACME Saw Sharpener, Bench model saw sharpener

388

H 78B Rooftop Chain
H 78B Rooftop Chain, for transfer deck

389

Electric Motor and Steel Bars
Electric Motor and Steel Bars, SEW-Eurodrive Inc. electric motor, 5 HP, 1680 RPM, 49 1/2" steel bars, 20 total, 4 arched steel pieces

390

Electric Motors
Electric Motors, Marathon electric motor- 5 HP, 1740 RPM, 184T frame, Hernco electric motor- 1 HP, 1725 RPM, 143T frame, US Electrical electric motor- 5 HP, 1440 RPM, 184T frame

391

Century Electric Motor
Century Electric Motor, Baldor electric motor- 7 HP, 1140 RPM, 215C frame, A.C. electric motor- 15 HP, 1750 RPM, 254TC frame, Thermoid 8-004-104, 9" plates, 20 total

392

Blade for Blower
Blade for Blower, 2" blade

393

Pipe and Sand Paper
Pipe and Sand Paper, 7" duct pipe, 3' long, 7 drainpipe elbows, 2- 36" rolls of sand paper

394

Pipe and Sandpaper
Pipe and Sandpaper,

420

Assorted Electrical Switches
Yaskawa V1000 switches, Wago 787-881, Wago 787-742, etc.

395

Mac Bags for bag house
Mac Bags for bag house, 14 boxes

396

Exhaust Fan Blades
Exhaust Fan Blades, 4' blades, 1 1/2" axis, 4 replacement blades total

397

Worm Gear Winch with Mounting Blocks
Worm Gear Winch with Mounting Blocks, Model 664-SLRFX, Tulsa Worm Gear Winch

398

Square Duct Frames and Storage Containers
Square Duct Frames and Storage Containers, 3- 39" x 39" x 5" deep, 4- 45 1/2" x 37" x 3 1/2" deep, 7 duct frames total, 1- 32" x 40" x 10" deep container, 1- 46" x 45" x 14" deep container

399

AJAX Auto Transformer Starter
AJAX Auto Transformer Starter, Part # RH-49831-1, 125/150 HP, 440 Volts, mounted in 28" x 32" x 12" deep box

400

Gate Valves
Gate Valves, 1- 2" axis, 2- 2 1/2" axis, 1- 3" axis, 1- 3 1/2" axis, 5 valves total

401

Lincoln Electric Motor
Lincoln Electric Motor, 125 HP, 1785 RPM, 444T frame, appears to be brand new

402

Bosch Hydraulic Oil Pumps
Bosch Hydraulic Oil Pumps, Smaller pump serial # 090-62111-04330, part # 0513300202, larger pump's pump # 6513870216

403

Electric Motors and Metal Straps
Electric Motors and Metal Straps, Westinghouse Life-Line electric motor serial # 7909, 10 HP, 1650 RPM, 215T frame, Delco electric motor serial # 068, 5 HP, 1465 RPM, 215T frame

405

Gear Wheels, Clamps, Oil Dry Powder
Gear Wheels, Clamps, Oil Dry Powder, 4- 12" gear wheels, 13- 4" clamps, 5 bags of oil dry powder

406

Ingersoll-Rand Air Compressor 30T
Ingersoll-Rand Air Compressor 30T, Model 2475N5, serial #C807072

407

Uline Bander Cart
Uline Bander Cart, 21" x 24" x 38" high

409

Grizzly Dust Collector
Grizzly Dust Collector, Electrical drive, mounted on portable platform

410

Electric Motors Band Saw
Electric Motors Band Saw, Shop Craft band saw, 10" blade, electric, 3 electric motors, assorted electrical parts

411

Ingersoll-Rand Industrial Air Compressor
Ingersoll-Rand Industrial Air Compressor, Model 2425N, serial # 696220, 30T, vertical tank

412

QL Kiln
QL Kiln, Model 40GL, lab oven, electric motor, 16" x 20" x 32" tall

413

Powermatic Band Saw
Powermatic Band Saw, Model 043, serial # 92430433, 3/4 HP electric motor

414

Ingersoll-Rand Air Compressor
Ingersoll-Rand Air Compressor, Model 242, serial # 720294, 5 HP motor, 30T, horizontal tank

415

Craftsman Tool Chest and Kiln
Craftsman Tool Chest and Kiln, 18" x 27" x 48" tall, loaded with tools, 11" belt for conveyor, small lab oven 16" x 20" x 31" tall

416

Electric Motors, Extension Cords, etc.
Electric Motors, Extension Cords, etc., 6 electric motors, air hose, 22" bart chain for chain saw, caulk gun

417

Saw Blades and Assorted Saw Mill Parts
Saw Blades and Assorted Saw Mill Parts, 2- 12" circle saw blades, steel blades, scale chop saw dust catcher, etc.

418

Grinding Wheels
Grinding Wheels, 4"-12" wheel, other miscellaneous parts

419

Assorted Steel Parts
Assorted Steel Parts, Old steel bars, wheels, plates, etc.

421

Assorted Tools
Assorted Tools, Wrenches, pipe wrenches, air tools and parts, etc.

422

Grinders
Grinders,

423

Dependable Machine Company Inc. Knife Sharpener
Dependable Machine Company Inc. Knife Sharpener, Model 152-A, serial # A2532

424

Rondamat 934 Knife Sharpener
Rondamat 934 Knife Sharpener, Model R-934, machine # 934-426

425

Sutton Knife Sharpener
Sutton Knife Sharpener, Serial # 268

426

Wheel Loader Forks
Wheel Loader Forks, 48" forks, fit Cat wheel loader, pin-in style

427

*Ingersoll Rand Air Compressor
*Ingersoll Rand Air Compressor, 5 HP electric motor, 100 gal. tank

428

*Bearings and Misc. Parts
*Bearings and Misc. Parts,

429

*Parts for Conveyors
*Parts for Conveyors,

430

*Steel Banding
*Steel Banding, 3/4" x .023, 10 rolls

431

*Dust Blower
*Dust Blower, Size 60-6,

432

*Fins for Dry Kilns
*Fins for Dry Kilns, Approx. 35 pcs. 18' long, brand new

434

*Wax Tank with Honda Engine
*Wax Tank with Honda Engine,

435

*Titan Industrial Hoist
*Titan Industrial Hoist, 5' high

450

Shelf Loaded with Steel Pipe Fittings
Shelf Loaded with Steel Pipe Fittings, Elbows, adapter, connectors, faucet handles, unions, nipples, hangers, etc.

451

Shelf Loaded with Steel Pipe Fittings
Shelf Loaded with Steel Pipe Fittings, Nipples, unions, elbows, T's, adapter, etc.

452

Metal Shelving with Tools
Metal Shelving with Tools, 2' x 3' x 8' high shelf, pvc pipe fittings, 24" circle saw blade in good condition, miscellaneous fasteners, fittings, auto parts, wax pump and sprayer

453

Ingersoll-Rand Air Compressor
Ingersoll-Rand Air Compressor, Model 216, serial # 6972835, 2 HP electric motor

454

Tool Bench Organizer Loaded with Parts
Tool Bench Organizer Loaded with Parts, Assorted nuts, bolts, screws, pulleys, washers, grinder wheels, etc.

455

Cole Tool Bench Vise Grip
Cole Tool Bench Vise Grip,

456

Columbian Bench Vise Grip
Columbian Bench Vise Grip,

457

File Cabinets
File Cabinets, 2 white cabinets, 14" x 25" x 29" high, filled with miscellaneous shop/office items, gray cabinet 26" x 14" x 51" high, filled with miscellaneous items

458

Large Shelf Loaded with Miscellaneous Shop Items
Large Shelf Loaded with Miscellaneous Shop Items, Plumbing, electrical, auto parts, etc.

459

Shelf Loaded with Miscellaneous Items
Shelf Loaded with Miscellaneous Items, Lots of welding rods, box of lumber crayons, , hand tools, fittings, etc.

460

Shelf Loaded with Miscellaneous Items
Shelf Loaded with Miscellaneous Items, Wire, conduit fittings, electrical panels and switches, sandpaper, spray paint, etc.

461

Large Rack with Lots of Steel
Large Rack with Lots of Steel, Steel pipes, rods, etc.

462

Metal-Cutting Band Saw
Metal-Cutting Band Saw, 1 HP electric motor

463

Set of Steel Saw Horses
Set of Steel Saw Horses, 25" x 54" x 29" tall

464

Torch Set
Torch Set, 19" x 10" rack for tanks, 26" x 36" overall

465

John Deere Riding Lawn Mower
John Deere Riding Lawn Mower, PIN MOL133A102932, 42" deck, 13 hp motor, condition unknown

466

Toro Snow Blower
Toro Snow Blower, Serial # 9001031, 32" blade, condition unknown

467

DeWalt Air Compressor
DeWalt Air Compressor, 1.6 HP electric motor, 15 gallon tank, 200 PSI max

468

Campbell Hausfield Air Compressor
Campbell Hausfield Air Compressor, 20 gallon tank, 150 max PSI, electric motor

469

Wilson Welder
Wilson Welder, Not in working condition

470

Shelf with Miscellaneous Parts
Shelf with Miscellaneous Parts, Auto parts, bolts, pins, washers, nuts, chain, etc.

471

Craftsman Tool Chest Loaded with Tools
Craftsman Tool Chest Loaded with Tools, Nuts, bolts, assorted fasteners and hard rods

472

Parker Hydraulic Hose Crimping Machine
Parker Hydraulic Hose Crimping Machine, Includes bench mounted vise grip, organizer full of hydraulic fittings, 1.5 HP electric motor

473

Steel Fittings and Heating Bulbs
Steel Fittings and Heating Bulbs, Assorted steel pipe fittings, 25W LED heating bulbs, etc.

474

Propane Tank Clamps, etc.
Propane Tank Clamps, etc., 15 lbs. propane tank, 1 gallon gas jug, chain hooks, assorted clamps, etc.

475

Electric Motors and Hoist
Electric Motors and Hoist, Century electric motor 3 HP, 1735 RPM, Baldor electric motor 7.5 HP, 3450 RPM, U.S. electric motor 7.5 HP, Budgit 2 ton electric hoist

476

Assorted Belts
Assorted Belts, Assorted sizes

477

Hydraulic Hoses
Hydraulic Hoses, 3/4" hoses

478

Scrap Steel
Scrap Steel, Steel bars, plates, pipes, etc.

479

Handy-Man Jack
Handy-Man Jack,

480

Floor Jack
Floor Jack, Walker heavy duty floor jack

481

Electric Motor and Scrap Steel
Electric Motor and Scrap Steel, Marathon electric motor, 7.5 HP, 3450 RPM, 184JMV frame

482

Handtools and Auto Parts
Handtools and Auto Parts, Large assortment of wrenches and other hand tools, brand new set of shocks, air filter, carburetor, etc.

483

Assorted Shop Tools
Assorted Shop Tools, 20 ton hydraulic jack, band saw blades, 4 gallon backpack style sprayer, skill saw, air nailer, etc.

484

Famco 25R Manual Press
Famco 25R Manual Press,

485

Powermatic Drill Press
Powermatic Drill Press, Model 1150A, serial # 94155168, 7.5 HP electric motor

486

Sprockets and Bearings
Sprockets and Bearings, All items in room