1

READ AND UNDERSTAND THESE TERMS AND CONDITIONS. Information Lot
This is a surplus equipment auction for VA Hardwood Flooring and other of its members.   This is a great opportunity to purchase super nice equipment (most ready to load).  The seller's maintenance crew will be on site to remove equipment and will be happy to give you  a quote on removal.   Call Mark Bear 814-285-7365 for quotes and scheduling  All items must be gone December 21 or forfeited to new land owner. Small items will be loaded "on the house" on Friday the 22 and Sat the 23rd.  After that there will be a charge and there will be charges for removal of equipment.    All items selling as is where is with no expressed or implied warranties of any kind.  All descriptions are consiencely  described but in now way implies warranty or use. 

10

Winston Machinery Incline 5 Strand Transfer Deck Check out lots 10-20
9' x 13' x 50" high, electric drive, needs sprocket and chain on drive Check out Lots 10-20 they make up a breakdown grading line, 1st lot of an entirety by request ONLY with 10% raise

11

Winston Machinery stick removal Belt Conveyor
21" x 12', 18" belt, no drive

12

Winston Machinery 5 Strand Incline Transfer Deck
9' x 13' x 50" high, electric drive

13

6 Strand Lumber Grading Chain
11' x 15'6" x 32" high, electric drive, C55B rooftop chain

14

Dead Rolls
50" x 26' overall, 4" x 48" rolls, 1 1/4" shaft, 32" roll spacing

15

Winston 6 Strand Unscrambler Machinery
8' x 16' x 5' high, electric drive   NOTE: This unscrambler will also work nicely with Lot 340A the T & S 4' Stacker/Package Maker 

16

Winston Machinery 4 Strand Transfer Deck
12'8" x 26' x 56" high, electric drive

17

6 Strand Transfer Deck
13' x 13' x 48" high, electric drive, popup stops

18

Winston Machinery Belt Conveyor
3' x 17'6" x 44" high, 30" belt, electric drive Infeed conveyor to Multi Gang Rip

19

Winston Machinery Roll Case
3' x 31' x 42" high, electric drive, 8 1/2" x 24" rolls, 2" shaft, 24" roll spacing

20

Hydraulic Unit
Tag on motor is missing

20a

* mcc and VFD for Winston system
Weg cfw 8vector inverter plus

20b

* CH nema 0 and weg CFW08 plus controls
Last lot of entirety 

20C

*Winston Machine Complete Breakdown Line Infeed to Ripping Line
Breakdown hoist with stick removal  landing table and transfer decks stick removal belt. Items 10-20

21

Industrial Upcut Saw
Serial # 501L-9-343885, 14" blade, electric drive Includes Foot Control

22

Industrial Upcut Saw
Serial # 501L-9-343585, 14" blade, electric drive

23

Kiln Carts
6 1/2" x 72", for 1 3/4" rails, 70 total

24

Hasko SR-24 Gang Saw
Serial # 0133512, 75 HP electric motor, hydraulic powered feed rolls, includes hydraulic pack on top

24A

*New Arbor for Hasko Rip Saw
.

25

Belt Conveyor with 4 Cutoff Saws
5' x 70' overall, 16" belt, saws have 12" blades, electric drive

26

Hasko Flooring Machine side matcher Feed Table
 13' infeed,    6 grooved spiral feed rolls with top roll indelible feed 10" bed plates  

27

Hasko Matchmaster FSM 4-Sided side matcher
HASKO MATCH MASTER  Side matcher flooring machine Serial # 9715911, 6" capacity, 40 HP electric motors on heads, (16) knife head hydraulic drive feed rolls.    The 75 HP hydraulic power pack not included with this lot is 30A and is the one for this machine includes dust tree. 9" bed plates. Includes console operation controls 

27A

*Matcher and Feed Table Control Panel
For Side Matcher and feed table

28

Yates American Profile Grinder
Serial # B-29393

29

Heads for Hasko Side Matcher
Heads for the  side matchers  and end matchers.  head jointing units extra knives  There are thousands of dollars of heads end matching heads, 16 knife and 12 knife planer heads and  side matching pattern  4" mechanic vise 

30

25 HP Hydraulic Pack
Was used on lot # 26 and 27

30A

75 HP Hydraulic Power Pack
For Match Master Side Matcher Feed

30B

Ingersoll-Rand Air Compressor
Model 523, serial # 30T280121, 7 1/2 HP electric motor, approx. 200 gallon vertical tank, located on the other side of the wall from lot # 30, marked 91B

31

Waste Conveyor
10" x 22', 6" belt, 4" sides, electric drive

32

Waste Conveyor
20" x 55', 4" sides, 16" belt, electric drive

33

Waste Conveyor
13" x 80', 3" sides, 12" belt, electric drive

34

Waste Conveyor
17" x 24', 5" sides, 13" belt, electric drive

35

Waste Conveyor
12" x 15' on incline, additional 10'

36

Waste Conveyor
14" x 12', 5" sides, 12" belt, electric drive

37

Waste Conveyor
17 1/2" x 28' x 35" high

38

Cornell Automated Cutoff Saw
Model SHL, serial # 634-7-85, 24" blade, 15 HP electric motor mounted motor controls, and pedestal control

39

Cornell Waste Conveyor
23" x 7', 6" sides, 19" belt, electric drive

40

Waste Conveyor and Metal Detector
17" x 17', 4" sides, 12" belt, electric drive with metal detector controls on wall

41

Williams Patent Crusher and Pulveriser
Serial # 20007, 24" x 30" top feed hopper, bottom discharge, swing hammers, does not include electric motor

42

Lincoln Electric Motor
100 HP, 1785 RPM, 405T frame

42A

*Starter and Disconnect for Hog
100 HP motor control soft start

43

6" Tailing Belt
8" x 26' x 42" high

44

Wooden slat conveyor at chop saws
12' x 28' x 60" high, electric drive

45

Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060811, 7 1/2 HP

45A

46

Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060810, 7 1/2 HP

46A

47

Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060809, 7 1/2 HP

47A

48

Crosscut Solutions Upcut Saw
Model CS14ML, serial # 060812, 7 1/2 HP

48A

49

Crosscut Solutions Upcut Saw
Model CS14ML, serial # 0603-11, 7 1/2 HP

49A

50

Wooden board slat conveyor transfer
5' x 36' x 60" high, electric drive

51

Hasko HSEM-C End Matcher system
Serial # 0653308T and serial # 0653308G, 8' x 36', very little use includes dust tree

52

Waste Conveyor
9" x 26', 4" sides, 6" belt

53

Belt Conveyor with Nesting Stations
14" x 42', 4" sides, 12" belt, electric drive transfers to nesting 6. 7'x 15" nesters. 

54

Belt Conveyor
51" x 9' x 54" high, electric drive, 30" belt

55

Wooden Conveyor
5' x 28' x 50" high

56

Belt Conveyor
16" x 60' x 32" high, electric drive

57

Nesting station Belt Conveyor
4 7' x 15" nesting bays with feed through belt.  16" x 60' x 32" high, electric drive

58

Wood slat transfer table
60" x 24' x 41" high, electric drive.  For finished flooring. 

59

Wooden Board slat transfer conveyor
60" x 24' x 41" high, electric drive for finished flooring 

60

Wooden board slat transfer Conveyor
60" x 36' x 41" high, electric drive for finished flooring 

61

Wooden board slat transfer Conveyor
60" x 36' x 41" high, electric drive. For finished flooring. 

62

Belt Conveyors
5 conveyors welded together, 6"-16" belts, 20' long, electric drive

63

Banding Machine
Includes skate rolls, 1/2" plastic banding

63a

4 packing carts
4x7 various lengths

64

Pallet of Blades, Motors, Banding Tools, and Miscellaneous Parts
Belt fasteners

65

66

Landen Strapping Machine
Model TPS-2000, 1/2" plastic banding, 3 phase

67

Landen Strapping Machine
Model TPS-2000, 1/2" plastic banding, 3 phase

68

Landen Strapping Machine
Model TPS-2000, serial # 0000081, 3 phase, not in working order

69

Flexband Plastic Banding
1/2" wide, 9900' per roll, 19 rolls

70

Wooden Cabinets and All Parts
Lots of brand new parts including: sprockets, chain, bolts, nuts, bushings, fuses, etc.

71

48" Blower
75 HP electric motor

72

Landen Strapping Machine
Model TPS-2000, serial # 1705, 1/2" plastic banding, 3 phase

73

Perske Electric Motor
30 HP, 3450 RPM

74

Perske Electric Motor
25 HP, 3520 RPM

75

Ingersoll-Rand Air Compressor
Model 253, serial # 30T655908

76

Titan Industrial Heavy Duty Shop Press
50 ton capacity

77

78

Wooden Cabinet and Contents
Grease, hydraulic motor, and miscellaneous parts

79

Wooden Cabinet and Contents
Cylinders, filters, bushings, bearings, etc.

80

Steel Rack and Contents
Electric motor, etc.

81

Yates American C50 Gang Saw
Serial # B-21766-R, 12" blades, 60 HP electric motor

82

Cart and Parts for Gang
Spacers, blades, etc., 12" blades, 3 1/2" arbor

83

84

85

86

Weinig Profimat 22 N 5 Head Moulder
Model P22N, machine # 226-6988, 9" head, 1 1/2" arbor, 4 sided with dust tree

87

Belt Conveyor
13" x 19' x 48" high, 3" sides, 12" belt, electric drive

88

Ingersoll-Rand Air Compressor
Model # 2525, serial # 6035526, 7 1/2 HP electric motor, approx. 200 gallon vertical tank

89

All Dust Pipe on Inside of Building
4"-24" diameter

90

Skid of Belts
4"-49 1/2" wide, various lengths

91

48" Carolina Dust Blower
W/ 125 hp motor 

91a

*telemecanique Square D
Ali start 46. 

92

Lincoln Electric Motor
125 HP, 1785 RPM, 444T frame

93

36" Carolina Blower
30 HP electric motor

94

48" Carolina Blower
No drive

95

Lincoln Electric Motor
100 HP, 1765 RPM, 405T frame

96

Mac bag house Dust Bin with Air Lock
17' diameter x approx. 40' tall, includes structure steel includes bag blow out unit 

97

Cyclone on Top of Tall Concrete Silo
Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

98

Cyclone on Top of Short Concrete Silo
Includes everything on inside of silo that buyers wishes to remove, cyclone is approx. 8' diameter

99

Dust Cyclone
18' diameter x approx. 25' tall, includes structure steel to roof

100

101

1992 Industrial Wood Boiler
Model WWF-690-250, serial # RMP69001, heating surface 4045 sq. foot, includes all parts in boiler  shut down by.boiler company  water treatment steam valves. 

101A

*Silo Unloader
electric drive, in silo behind boiler

102

1972 Cleaver Brooks LP Boiler
Serial L-54637, model CB100-400, this boiler was in good working condition whey they shut down, includes all parts and accessories for boiler

102A

*Water Conditioner
Was used to treat water going to boiler, 80" x 80" x 100" tall

102B

*Well-X-Trol Pressure Tank
Model # WX-302, 24" x 49"

102C

*Inswool Ceramic Fiber Blanket
1" thick x 25' long, 7 boxes

103

Steam-Pak LP Boiler
Model SPH600-6-116678, serial # 682909H41548, not in working condition

103A

48" Dust Blower
75 HP electric motor

103B

103C

*12" Powermatic Tablesaw
Model 72A, serial # 9572014, electric drive

103D

104

Newman S-382 2 Sided Planer
Serial # 14510, 6" x 30" capacity, spiral cutter heads, 40 HP motor on bottom arbor, 75 HP on top arbor, includes hydraulic pack for feed rolls, 25' infeed, 11' outfeed

105

Mereen-Johnson 424DC Multi Gang Rip Saw
Model 424-DC, serial # MJ-4134, top arbor, 12" blades, electric drive, good condition

106

Lumberline Laser System
6 lasers, includes steel frame to floor

107

Electric Lift Table
4' x 8'

108

5 Strand Transfer Deck
12'6" x 15' x 34" high, H-78-B rooftop chain, does not include shaft that connects it to lot # 109, no drive

109

5 Strand Transfer Deck
11' x 46' x 34" high, electric drive

110

Adjustable Lumber Carts
50" x 7', extends to 11'

111

Adjustable Lumber Carts
50" x 7', extends to 11'

112

Adjustable Lumber Carts
50" x 7', extends to 11'

113

Adjustable Lumber Carts
50" x 7', extends to 11'

114

3 Strand Transfer Deck
12' x 16', electric drive, 1st lot of an entirety

114A

5 Strand Transfer Deck
12' x 10', electric drive

114B

Unscrambler and Transfer Deck After Unscrambler
16' wide, electric drive

114C

Entirety Lot # 114-114B
With 10% raise

115

Transfer Deck With 8’ Tilt Hoist
12' x 30', electric drive, 1st lot of an entirety 8' tilt hoist.  

116

15 HP Hydraulic Pack
Was used for lot # 115

117

Stick removal Conveyor belt
18" x 26', 11" belt, electric drive

118

5 Strand Transfer Deck
12' x 12'6", air popup stops, electric drive

119

Cornell Unscrambler
6' x 11', electric drive

120

Grating chain/Infeed for Trim Saw
10'6" x 30', even end rolls, electric drive

121

Cornell Trim Saw
24" blades, 2 blade, 16' capacity, waste conveyor, electric drive

122

6 Strand Transfer Deck
10'3" x 110' x 39" high, electric drive

122A

Entirety Lot 115-122
With 10% raise

122B

600 amp AB Motor Control Center
Allen-Bradley Centerline Motor Control Center.  600 amp with Allen Bradley motor control box with operator control over grating chain

122C

Parts for Cornell grate and trim line
81x repair chain links, 1st aid kits enclosed in locker cabinet

123

Ingersoll-Rand Air Compressor
Model 242, serial # 30T861092, 5 HP electric 3 phase motor, approx. 120 gallon vertical tank

124

Transfer Deck With Tilt Hoist
11'6" x 38', electric drive, 1st lot of an entirety

125

4 Strand Transfer Deck going to Drop Rolls
12' x 40', air popup stops

126

Waste Conveyor
14" x 23', 4 sides, 12" belt, electric drive

127

Waste Conveyor
19" x 18', 4" sides, 12" belt, on incline, electric drive

128

Drop Rolls to put Drying Sticks In
9' x 17', 8 1/2" x 6'5" rolls, raises up to 18', electric drive

129

Entirety Lot 124-128
With 10% raise

130

Lewco Skate Rolls
16" x 60'

131

Rack for Drying Sticks
7' x 8'

132

Cornell Roll Case
10' x 95', 8 1/2" x 9' rolls, 28" roll spacing, 2 1/2" shaft, missing 1 roll, the first 20' is live rolls, electric drive

140

CAT 920 Wheel Loader
Serial # 62K5626, hours are unavailable, includes 8' pin-on bucket, cab has A/C, CAT engine, runs and operates

141

CAT 950 Wheel Loader
Serial # 81J9507, meter reads 6926 hours, includes 86" pin-on grapple attachment, CAT engine, runs and operates

142

CAT V180B Forklift
Model V180B, serial # 68Y00956, meter reads 17,337 hours, 6' forks, 7' wide mast, 10'6" tall, CAT engine

143

Hyundai 70D-7E Forklift
PIN HHKHFZ11PD0002246, truck weight 25,527 lbs., 4' forks, mast 83" wide, 10'6" tall, hours unknown, NO MOTOR OR TRANSMISSION

144

20951 Road Grader
Serial # DV-230895, hours unknown, 12' blade, Cummins diesel engine, runs and operates

145

Cat V330B Forklift
Serial # 72Y01429, 33,000 lbs. lift, 13' mast height, Cat engine

146

1998 Ford F-150 Pickup Truck, VIN # 1FTZF1821WNB69120
Year: 1998 Make: Ford Model: F-150 Vehicle Type: Pickup Truck Mileage: meter reads 26,713 miles Plate: Body Type: 2 Door Cab; Regular; Styleside Trim Level: Standard; XL; XLT; Lariat Drive Line: 4WD Engine Type: V6, 4.2L (256 CID); OHV Fuel Type: Gasoline Horsepower: Transmission: VIN #: 1FTZF1821WNB69120 Features and Notes: not currently in working condition

150

Westinghouse Electric Motor
7.5 HP, 3 PH, new in the crate

151

Westinghouse Electric Motor
5 HP, 3 PH, new in the crate

152

Electric Motors
50 HP, 20 HP, 25 HP, condition unknown

153

GE Electric Motor
75 HP, 3 PH, frame 405TS, loose

154

Schorch Electric Motor
150 HP, 3 PH, frame 445-2, loose

155

Electric Motor
150 HP, 3 PH, frame, 445-2, loose

156

Louis Allis Electric Motor
150 HP, 3 PH, frame 44TT, loose

157

Electric Motor
150 HP, 3 PH

159

40 HP Hydraulic Power Pack
Includes 3/4 HP electric pump, heat exchanger tank 22 1/2" x 71 1/2" x 31", good condition

160

Whirlwind Upcut Saw
Model 1000R, serial # S-3184602R, 12" blade, foot pedal

161

162

Gear Drive
With 5 HP electric drive, on steel frame

163

30 HP Hydraulic Power Pack
Serial # A-3275-A, 100 gallon tank

164

165

2018 Baker Band Resaw
Model BBR-O"ABX", serial # 18-4878, 2" bands, 28" bandwheels, 40 HP electric drive, 11 1/2" belt, manual, excellent condition

165A

New Resaw Bands For Baker
Fits lot # 165, 14'2", 18 pieces in box, 2" wide

166

Electric Motor
15 HP, 30 HP

167

Armstrong Circle Saw Sharpener
Serial # 17400, 1 HP electric drive with control box. Manual

168

Vollmer Grinder
Fab No. 172, electric drive

169

Pallet of Blades
24" x 1 1/2" arbor

170

Electrical panel
Fused disconnect Starter

170A

American Scissor Lift
Model 2JA, serial # 4866-5, 4000 lbs. lift, foot pedal

171

20 HP Ploypac Hydraulic Power Pack
Serial # P87-351, 35 gallon, good condition

172

30 HP Hydraulic Power Pack
Cooling unit, tank 15" x 72" x 35" high, good condition

173

Gear Reduction Drive
13.6 HP, ratio 15.5

174

Pallet of Sprockets
8"-24"

175

176

177

178

Large Box of Oil Filters
Big selection of sizes

179

180

Washer Parts
22" x 35" x 35" high, on casters

181

182

183

184

Pallet of Chains
Several types

185

5 HP Rucker Hydraulic Power Pack
Serial # 22331230A, 30 gallon

186

30 HP Ploypac Hydraulic Power Pack
No. P89-462, 90 gallons

187

Inovec Hydraulic Power Pack
Serial # A3275C, 2- 30 HP, 1- 2 HP electric drives, 150 gallons, good condition

188

Pallet of Rollers
8 3/4" x 36" rollers, with bearings, 5 pieces

189

Pallet of Rollers
8 3/4" x 30", with bearings, 5 pieces

190

191

192

Pallet of Grease Hose Reels
Good condition

193

Pallet of Electric Parts
Conduit, etc.

194

Pallet of FMP Storage Drawers
Brass fitting, bolts, etc., fully loaded

195

196

197

Gear Reduction Drive
7.5 electric drive

198

Pallet of H130 Chains
2 skids

199

36 1/2" Pulley
8 groove, 6 1/2" hub, debarker chain

200

Transformer
Single phase, 25 KVA

201

40 HP Hydraulic Power Pack
Serial # 2536JOB7786, 24" x 59" x 26" high, heat exchanger

202

20 HP Mellott Hydraulic Pack
12 1/2" x 33" x 36", excellent condition

203

204

Pallet of Miscellaneous
Reduction Gear Drive, line shaft with sprockets

205

206

Pallet of Log Trough Chain
12" wide

207

Gear Reduction Drives
7 pieces

208

Band-O-Matic Bander
DBI-8160, with 1/2" banding

209

Pallet of Miscellaneous
Electric motors, 10 HP, 14" saw blades, chains, etc.

210

Pallet of Chains
30 HP electric motor, chains are used for wooden conveyors

211

48" Box Fan
With electric drive

212

25 HP Electric Motor
3 PH, new in crate

213

Wall Vent
40" x 40", 2 pieces, new in crate

214

End Matching Chains
Used, miscellaneous parts

215

Pallet of Miscellaneous
Electric motors, gear boxes

216

Pallet of Rollers
6 3/4" x 48" rollers (6 pieces), 2 radiators

217

218

Square D Electrical Panel
With disconnect

219

Log Trough Chain
11 1/2" wide

220

Log Trough Chain
6" wide

222

Miscellaneous Box
Electric boxes, gear drive

223

40 HP Lincoln Electric Motor
3 PH, brand new

224

75 HP Electric Motor
3 PH, loose

225

50 HP Electric Motor
3 PH, new in crate

226

Pallet of Pulleys
Sprockets, gear drives

226A

20" Blower Fan
New in crate

227

20 HP Hydraulic Power Pack
With heat exchanger, 24" x 35" x 18"

228

Scissor Lift
Needs work

229

230

Hydraulic Saddle Turner
Hydraulic drive, good drive

231

Hydraulic Saddle Turner
Hydraulic drive, good drive

232

Pallet of Chains
Gear drives, sprocket

233

Industrial Upcut Saw
Foot pedal, no blade, electric drive

234

Box of Miscellaneous
Chains, hydraulic hoses, control box

235

End Matching Chains
3 boxes

236

Pallet of Chains
Used for wooden conveyors

237

Pallet of Chains
Waste Conveyor

238

20 HP Hydraulic Power Pack
24" x 35 1/2" x 15" high tank

239

10 HP Hydraulic Power Pack
with heat exchanger, 20 1/2" x 34" x 19 1/2"

240

241

National Vertical Air Tank
Serial # 12511

242

Box Miscellaneous
Cutter heads, chains, dynamitic control box

243

244

245

Saddle Turner
Hydraulic drive, good condition

246

Barrel of Chains
3 barrels

247

248

249

Pallet of Chain Sprockets
Also has gear reductions

250

Yates Floor End Matching Machine
B-26869-R, 5 HP electric drive

251

Yates Floor End Matching Machine
B-26869-R, 5 HP electric drive

252

Yates E1 End Matching Machine
4 HP electric drive

253

Yates End Matching Machine
B-23800, 4 HP electric drive

254

Yates-American Flooring A23 Side Matcher
Model A23, serial # B-25902, 4 head, with electric panel

255

Lumber Rack
8 3/4" x 87 1/2" rollers, vertical air tank, live roll case 18" x 8', hydraulic drive

256

Yates-American Flooring A23 Sidematcher
Model A23, serial # 22990

257

Mattison Straight-line Rip Saw
Model 202, serial # 14141, table 65 1/2" x 77 1/2"

258

36" Blower
No drive, outlet 22" x 24", inlet 21"

259

36" Blower Fan
29" x 48" box with miscellaneous parts, seals, sprockets, etc.

260

52" Blower Fan
Hub 2 3/4", good condition

261

52" Blower Fan
Hub 2 3/4", good condition

262

52" Blower Fan
Hub 2 3/4", good condition

263

46" Blower Fan
Hub 2 3/4", 20" wide, good condition

264

34 1/2" Blower Fan
Hub 2 1/2", 14 3/4" wide, good condition

265

58" Precision Chipper
Serial # C.3732, 6 knife, very good condition

266

58" Precision Chipper
Serial # 3769, 6 knife, very good condition

267

Carriage Drum Drive
Sits on steel frame 51" x 102", gear is in good condition, motor has fire damage

268

Yates-American G-55 Planer
serial # B-29894, electric/hydraulic, electric drive

269

24" Cutoff Saw
Electric drive, hydraulic controls, 42" x 445" x 67" high

270

Electric Motor
125 HP, 3 PH, loose

271

250 HP Electric Motor
Frame 447TZ, 3 PH, good condition

271A

250 HP Electric Motor
Frame 447TZ, 3 PH, not electrically sound

272

Yates-American G-50 Planer
Serial # 24399, 50 HP drive

273

Williams Crusher and Pulverizer
Serial # 15456, 75 HP electric drive, top feed, bottom discharge

274

275

276

277

Filbert Stowell Band Head Rig
31" x 9' off bearing belt, hydraulic strain, 7' bandwheels, 13" wide, 1" meat

279

Oliver Straitoplane
Machine No. 170, serial # 96387, 36", electric drive

281

Pallet of Miscellaneous Parts
Pulleys 5 1/2"-19 1/2"

282

Pallet of Miscellaneous Parts
Electric motors, Ingersoll-Rand air compressor, gear box

283

Chipper Knives
Variety of sizes

284

Pallet of Rollers
8 1/2" x 49 3/4" rollers with bearings, 6 pieces

285

Pallet of Shafts
59" long

286

Jackson Cochrane Planer
No. 30, electric drive

287

288

Benshaw Chipper Braking Starter
36" x 48"

289

Electrical Panel
48" x 72"

290

Paulson Horizontal Band Mill Diesel Engine
Fully hydraulic, 36" band wheels, ISUZU diesel engine, 4" band, 36" x 24' deck, log turner, extra bands, meter shows 1559 hours

291

Pallet of Storage Containers
Loaded with bolts, etc.

292

Mattison Straight-line Rip Saw
No blade, electric drive, 65" x 77 1/2" table

293

Tool Chest
13 drawer, 20" x 40"

294

Pallet of Filters
Oil and air

295

Pallet of Chains
Various sizes

296

297

1 1/4" Metal Banding
5 rolls

298

Pallet of Belts
New and used

299

300

Hoses and Sprockets
Air, hydraulic hoses

301

302

303

304

Pallet of Miscellaneous
Electric motors, gear drives

305

306

Pallet of Miscellaneous Parts
Seals, wire looms, bearings

307

Pallet of Miscellaneous
Milwaukee bench grinder, air impact, hand fuel pump

308

308d

Kiln components
Kiln 11, 12, 13, 14 with dell computer. Brother printer Variable feed drive

308f

Siemens 400 amp main
In kiln 11-14 kiln office includes GE 75 KVA transformer

308g

Kilns 5;6;7. Controls and components
three Lignomat. VFD cabinets. PLLC cabinets stripped.  includes doors fans and all interior kiln components

308h

309

Pallet of Rollers
8 1/2", 24"-42"

309A

309B

309C

309D

Liftrite Pallet Jack
5500 lb. lift, works

310

Wisconsin Gas Engine
Model VH40, serial # 5246516

310d

Oahu’s pro scout scales
With calibration weights

310e

kiln trek kiln components
Main for kiln controls For 11,12,13 and 14. No controls  includes kiln components. Pipes doors fans vents.   includes dell computer and brother printer only 

311

15 HP Hydraulic Power Pack
30" x 60" x 18" high

312

Riding Tennant Sweeper
Model 6500, serial # 6500-6821, GVW 5200, LP gas engine, meter shows 935 hours, condition unknown

313

ACME 1/2" Plastic Black Banding
3600 ft. per box, 28 boxes

314

ACME 1/2" Plastic Black Banding
3600 ft. per box, 18 boxes

315

Gempaint
End paint for dried lumber, heaters, pump included, 4 full barrels, 5 empty

316

317

3 Fans on Stands
30" and 32"

325

3 Used Tires
2- 20.5-25, 1- 15.5-25

328

ASM Unscrambler
10' x 17'6" x 6'4" tall, hydraulic drive 8 strands of welded bar chain

329

Debarker
No tag or any info on it, 12' infeed

330

Rack for Drying Sticks
7' x 8'

330A

Rack for Drying Sticks
7' x 8'

330B

Rack for Drying Sticks
7' x 8'

331

Rack for Drying Sticks
4' x 7'

331A

Rack for Drying Sticks
4' x 7'

331B

Rack for Drying Sticks
4' x 7'

331C

Rack for Drying Sticks
4' x 7'

331D

Rack for Drying Sticks
4' x 7'

331E

Rack for Drying Sticks
4' x 7'

331F

Rack for Drying Sticks
4' x 7'

331G

Rack for Drying Sticks
4' x 7'

331H

Rack for Drying Sticks
4' x 7'

331I

Rack for Drying Sticks
4' x 7'

331J

Rack for Drying Sticks
4' x 7'

331K

Rack for Drying Sticks
4' x 7'

331L

Rack for Drying Sticks
4' x 7'

331M

Rack for Drying Sticks
4' x 7'

332

Custom Built 4 HB Carriage
30" x 16' carriage

333

Operator's Cab
4' x 6' x 80" tall, Corley controls, needs glass replaced

334

Carriage Track
45" center to center x 48'

334A

Tyrone-Berry Feed and Drive
Model SMA-215, serial # A2186, DA-L/M4005. Pump and drum package 

334B

Entirety Lot # 332-334A
With 10% raise

335

Angled Spiral Rollcase and Transfer Deck
68" x 13', transfer going to rolls is 10', electric drive. First of the entirety of the TS manufacturing package maker

336

Spiral Roll Case
48" x 15' x 36" high, 9" x 36" rolls, 1 7/8" shaft, 27" roll spacing, every roll has a hydraulic motor. Not part ,Of the entirety 

337

T S Mfg package breakdown hoist
12'6" wide.  Part of entirety. 337;338;339;335;339;340

338

3 Strand Transfer Deck
6' x 11' x 32" high, frame only, electric drive part of the TS Manufacturing  stacking system. 335,337,338,338a,339,340

339

Breakdown hoist
11'6" x 13'6". With package deck

339a

340

Transfer Deck
8' wide, 2 sections approx. 24' long

340a

T and S Manufacturing stacking components complete. 4’
Includes. 335,337,338,339,340,338a.  T and S stacker package maker. Ready to load seller or TAS have drawings.   job number. 16994, entirety with 10% raise scan 1.pdf Scan_.pdf

340b

Hemco Lumber Sorter Series 43 Dismantled and ready to load
24 23 sorts 1 reject  Bay 16'  sorter disassembled and ready to load standard Series 43 Sling Sorter Last Install Job 2745 Controls are available for this traditional sling sorter from USNR   Situated at the Bradford Pa site 444 High Street Bradford PA  

341

5 Strand Transfer Deck
7' x 13' x 35" high, hydraulic drive, needs shaft on one end

342

Mellott Vibrating Conveyor
25" x 60' x 19" high, 19" pan, 4" sides, electric drive

343

Webster Vibrating Conveyor
33" x 12' x 23" high, 24" pan, 6" sides, electric drive

344

Balderson Bucket
21" center to center of quick attach, 2 1/8" mounting hole, 9' wide, for Cat loader

345

Balderson Bucket
23" center to center of quick attach, 2" mounting holes, 128" wide, for Cat loader

346

Loader Bucket
28" center to center of quick attach, 1 1/2" mounting hole, 103" wide, for Cat loader

346A

Loader Forks
28" center to center of quick attach, 1 1/2" mounting hole, 46" forks, for Cat loader

347

Roll Case
10' x 15' x 38" high, 8 1/2" x 108" rolls, 30" roll spacing, 2 1/2" shaft, hydraulic drive

348

Dead Rolls
16" x 20', 4" x 12" rolls, 12" roll spacing, 1 1/4" shaft

349

Spiral Roll Case
56" x 18' x 46" high, 9" x 42" rolls, 22" roll spacing, 2 3/8" shaft, needs bearings replaced, no drive

350

Roll Case
41" x 18' x 33" high, 8 1/2" x 30" rolls, 30" roll spacing, 2" shaft, has shaft to mount transfer deck

351

Hanchett knife Sharpener
Size 38", type DN, shop # 8063

352

Power Transmission
5 HP electric motor

353

Overhead Hoist System
7' x 11' x 12' tall, 2 ton hoist

354

Mereen-Johnson Gangsaw
Model 424-DC, serial # MJ5173, for parts or to rebuild

355

Steel Rack and Shafts with Sprockets
2"-4" shafts, various lengths

356

356A

*4 Strand Log Deck
10' 4" x 17', rebuilt with new chain, new bearings, electric drive

357

Adjustable Lumber Cart
42" x 98"

358

Adjustable Lumber Cart
42" x 98"

359

Adjustable Lumber Cart
42" x 98"

360

Adjustable Lumber Cart
42" x 98"

361

Adjustable Lumber Cart
42" x 98"

362

Adjustable Lumber Cart
42" x 98"

363

Adjustable Lumber Cart
42" x 98"

364

Adjustable Lumber Cart
42" x 98"

365

Adjustable Lumber Cart
42" x 98"

366

Adjustable Lumber Cart
42" x 98"

367

Lumber Cart
42" x 84"

368

Lumber Cart
42" x 84"

369

Lumber Cart
42" x 84"

370

Adjustable Lumber Cart
42" x 98"

371

Lumber Cart
42" x 84"

372

Lumber Cart
42" x 84"

373

Adjustable Lumber Cart
42" x 98"

374

Rack for Drying Sticks
4' x 7'

375

Adjustable Lumber Cart
42" x 98"

375A

*Chain Conveyor
18" x 30' x 28" high, electric motor

376

Adjustable Lumber Cart
42" x 98"

378

Adjustable Lumber Cart
42" x 98"

379

Adjustable Lumber Cart
42" x 98"

380

Adjustable Lumber Cart
42" x 98"

404

Vecoplan Electric Panel
30" x 36" x 12" deep

381

Lumber Cart
41" x 96", includes 4 x 4's

382

Lumber Cart
42" x 84"

383

Lumber Cart
42" x 84"

384

Adjustable Lumber Cart
42" x 98"

408

Yaskawa V1000 Electrical Switches
27 total V1000 switches, 3- WAGO 787-880 electrical switches, 2- WAGO 787-742 electrical switches, 1- WAGO 787-740 electrical switch

384A

385

Electric Motor and Roller
Weg motor, 15 hp, 3520 RPM, 16" x 16" roller, Newco 150 steel WCB 77, 4" long 2 1/2" steel bar

386

Ductwork for Electrical Wiring
6" x 6" ducts, 30' of ducts

386A

Rack for Drying Sticks
7' x 8'

387

ACME Saw Sharpener
Bench model saw sharpener

388

H 78B Rooftop Chain
for transfer deck

389

Electric Motor and Steel Bars
SEW-Eurodrive Inc. electric motor, 5 HP, 1680 RPM, 49 1/2" steel bars, 20 total, 4 arched steel pieces

390

Electric Motors
Marathon electric motor- 5 HP, 1740 RPM, 184T frame, Hernco electric motor- 1 HP, 1725 RPM, 143T frame, US Electrical electric motor- 5 HP, 1440 RPM, 184T frame

391

Century Electric Motor
Baldor electric motor- 7 HP, 1140 RPM, 215C frame, A.C. electric motor- 15 HP, 1750 RPM, 254TC frame, Thermoid 8-004-104, 9" plates, 20 total

392

Blade for Blower
2" blade

393

Pipe and Sand Paper
7" duct pipe, 3' long, 7 drainpipe elbows, 2- 36" rolls of sand paper

394

420

Assorted Electrical Switches
Yaskawa V1000 switches, Wago 787-881, Wago 787-742, etc.

395

Mac Bags for bag house
14 boxes

396

Exhaust Fan Blades
4' blades, 1 1/2" axis, 4 replacement blades total

397

Worm Gear Winch with Mounting Blocks
Model 664-SLRFX, Tulsa Worm Gear Winch

398

Square Duct Frames and Storage Containers
3- 39" x 39" x 5" deep, 4- 45 1/2" x 37" x 3 1/2" deep, 7 duct frames total, 1- 32" x 40" x 10" deep container, 1- 46" x 45" x 14" deep container

399

AJAX Auto Transformer Starter
Part # RH-49831-1, 125/150 HP, 440 Volts, mounted in 28" x 32" x 12" deep box

400

Gate Valves
1- 2" axis, 2- 2 1/2" axis, 1- 3" axis, 1- 3 1/2" axis, 5 valves total

401

Lincoln Electric Motor
125 HP, 1785 RPM, 444T frame, appears to be brand new

402

Bosch Hydraulic Oil Pumps
Smaller pump serial # 090-62111-04330, part # 0513300202, larger pump's pump # 6513870216

403

Electric Motors and Metal Straps
Westinghouse Life-Line electric motor serial # 7909, 10 HP, 1650 RPM, 215T frame, Delco electric motor serial # 068, 5 HP, 1465 RPM, 215T frame

405

Gear Wheels, Clamps, Oil Dry Powder
4- 12" gear wheels, 13- 4" clamps, 5 bags of oil dry powder

406

Ingersoll-Rand Air Compressor 30T
Model 2475N5, serial #C807072

407

Uline Bander Cart
21" x 24" x 38" high

409

Grizzly Dust Collector
Electrical drive, mounted on portable platform

410

Electric Motors Band Saw
Shop Craft band saw, 10" blade, electric, 3 electric motors, assorted electrical parts

411

Ingersoll-Rand Industrial Air Compressor
Model 2425N, serial # 696220, 30T, vertical tank

412

QL Kiln
Model 40GL, lab oven, electric motor, 16" x 20" x 32" tall

413

Powermatic Band Saw
Model 043, serial # 92430433, 3/4 HP electric motor

414

Ingersoll-Rand Air Compressor
Model 242, serial # 720294, 5 HP motor, 30T, horizontal tank

415

Craftsman Tool Chest and Kiln
18" x 27" x 48" tall, loaded with tools, 11" belt for conveyor, small lab oven 16" x 20" x 31" tall

416

Electric Motors, Extension Cords, etc.
6 electric motors, air hose, 22" bart chain for chain saw, caulk gun

417

Saw Blades and Assorted Saw Mill Parts
2- 12" circle saw blades, steel blades, scale chop saw dust catcher, etc.

418

Grinding Wheels
4"-12" wheel, other miscellaneous parts

419

Assorted Steel Parts
Old steel bars, wheels, plates, etc.

421

Assorted Tools
Wrenches, pipe wrenches, air tools and parts, etc.

422

423

Dependable Machine Company Inc. Knife Sharpener
Model 152-A, serial # A2532

424

Rondamat 934 Knife Sharpener
Model R-934, machine # 934-426

425

Sutton Knife Sharpener
Serial # 268

426

Wheel Loader Forks
48" forks, fit Cat wheel loader, pin-in style

427

*Ingersoll Rand Air Compressor
5 HP electric motor, 100 gal. tank

428

429

430

*Steel Banding
3/4" x .023, 10 rolls

431

*Dust Blower
Size 60-6,

432

*Fins for Dry Kilns
Approx. 35 pcs. 18' long, brand new

434

435

*Titan Industrial Hoist
5' high

450

Shelf Loaded with Steel Pipe Fittings
Elbows, adapter, connectors, faucet handles, unions, nipples, hangers, etc.

451

Shelf Loaded with Steel Pipe Fittings
Nipples, unions, elbows, T's, adapter, etc.

452

Metal Shelving with Tools
2' x 3' x 8' high shelf, pvc pipe fittings, 24" circle saw blade in good condition, miscellaneous fasteners, fittings, auto parts, wax pump and sprayer

453

Ingersoll-Rand Air Compressor
Model 216, serial # 6972835, 2 HP electric motor

454

Tool Bench Organizer Loaded with Parts
Assorted nuts, bolts, screws, pulleys, washers, grinder wheels, etc.

455

456

457

File Cabinets
2 white cabinets, 14" x 25" x 29" high, filled with miscellaneous shop/office items, gray cabinet 26" x 14" x 51" high, filled with miscellaneous items

458

Large Shelf Loaded with Miscellaneous Shop Items
Plumbing, electrical, auto parts, etc.

459

Shelf Loaded with Miscellaneous Items
Lots of welding rods, box of lumber crayons, , hand tools, fittings, etc.

460

Shelf Loaded with Miscellaneous Items
Wire, conduit fittings, electrical panels and switches, sandpaper, spray paint, etc.

461

Large Rack with Lots of Steel
Steel pipes, rods, etc.

462

Metal-Cutting Band Saw
1 HP electric motor

463

Set of Steel Saw Horses
25" x 54" x 29" tall

464

Torch Set
19" x 10" rack for tanks, 26" x 36" overall

465

John Deere Riding Lawn Mower
PIN MOL133A102932, 42" deck, 13 hp motor, condition unknown

466

Toro Snow Blower
Serial # 9001031, 32" blade, condition unknown

467

DeWalt Air Compressor
1.6 HP electric motor, 15 gallon tank, 200 PSI max

468

Campbell Hausfield Air Compressor
20 gallon tank, 150 max PSI, electric motor

469

Wilson Welder
Not in working condition

470

Shelf with Miscellaneous Parts
Auto parts, bolts, pins, washers, nuts, chain, etc.

471

Craftsman Tool Chest Loaded with Tools
Nuts, bolts, assorted fasteners and hard rods

472

Parker Hydraulic Hose Crimping Machine
Includes bench mounted vise grip, organizer full of hydraulic fittings, 1.5 HP electric motor

473

Steel Fittings and Heating Bulbs
Assorted steel pipe fittings, 25W LED heating bulbs, etc.

474

Propane Tank Clamps, etc.
15 lbs. propane tank, 1 gallon gas jug, chain hooks, assorted clamps, etc.

475

Electric Motors and Hoist
Century electric motor 3 HP, 1735 RPM, Baldor electric motor 7.5 HP, 3450 RPM, U.S. electric motor 7.5 HP, Budgit 2 ton electric hoist

476

Assorted Belts
Assorted sizes

477

Hydraulic Hoses
3/4" hoses

478

Scrap Steel
Steel bars, plates, pipes, etc.

479

480

Floor Jack
Walker heavy duty floor jack

481

Electric Motor and Scrap Steel
Marathon electric motor, 7.5 HP, 3450 RPM, 184JMV frame

482

Handtools and Auto Parts
Large assortment of wrenches and other hand tools, brand new set of shocks, air filter, carburetor, etc.

483

Assorted Shop Tools
20 ton hydraulic jack, band saw blades, 4 gallon backpack style sprayer, skill saw, air nailer, etc.

484

485

Powermatic Drill Press
Model 1150A, serial # 94155168, 7.5 HP electric motor

486

Sprockets and Bearings
All items in room