Menno Hostetler
Previous Page Listing ID#: 1308104

Auction Location

Seymour, IA 52590
Auction Dates and TimesSALE IS COMPLETED
Thursday Jul 29, 2021 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions

There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Information
Good lineup of woodworking and sawmill equipment including, 10+ beltsanders, ( Timesavers, SCMI, Powermatic, AEM, and more) 10+ tablesaws, (SawStop, Delta, and more) joiners, shapers, moulders, boring machines, 3 head Baker Resaw, Cat skid steer, and much more. Call Myron @ 574.229.4341 to consign your equipment. Live, phone, and online bidding available. Call Dan Troyer with equipment questions 330.749.9478

00
Information Lot
We will start the auction at 9:00 AM CST. Everything sells in catalog order. We will be adding many more lots the day before the auction so keep checking back. Loadout terms, free loading, July 29th after auction till 7pm, & July 30th, 31st, No loading August 1st & 2nd, Free loading August 3rd, 4th, 5th, 6th, By appointment after August 6th. Everything must be removed by August 13th. Owner is willing to palletize and crate for a fee. Contact Menno 641-898-2248 for more information.

 

90
Marlin 22 L.R.
Serial # 72160514, semi-auto, has some rust

91
Ruger M77 22-250 ACK. IMP.
Serial # 73-99754, bolt action, stainless bull barrel

92
Savage Model 111 270 Win.
Serial # J309204, bolt action, Nikon scope

93
Thompson/Center Bone Collector 50 Cal. Muzzleloader
Serial # VEF0050, camo stock

94
2 Boxes of 270 Ammo
.

95
3 Boxes of 20 Gauge Ammo
.

96
125 Rounds 12 Gauge Ammo
.

97
Nikon Buckmasters II 3-9x40 Scope
BDC reticle 

98
Whitetail Classic 3-9x40 Scope
.

99
BSA Deerhunter Scope
.

100
Stihl MS 661C Chainsaw
24" bar, good working condition

101
Stihl MS 661 Chainsaw
24" bar, good working condition

102
Stihl 660 Chainsaw
24" bar, good working condition

103
Stihl 660 Chainsaw
24" bar, good working condition

103A
Stihl MS 660 Chainsaw
.

104
3 Chainsaw Guards
18"-24"

105
Stihl High Flow Kit
2 pieces

106
Chain Binders
2 pcs. 

107
Bolt Cutters
.

108
Stihl Bars
2- 24", 1 -20"

109
5/8" Choker Cables
2 pieces

110
5/8" Cable
.

111
Ridgid 3 1/2" Framing Nailer and Grease Gun
.

112
Loggers Pride Bar and Chain Oil
5 cases

112A
Loggers Pride Bar and Chain Oil
5 cases

112B
Loggers Pride Bar and Chain Oil
5 cases

112C
Loggers Pride Bar and Chain Oil
5 cases

112D
Loggers Pride Bar and Chain Oil
5 cases

112E
Loggers Pride Bar and Chain Oil
5 cases

112F
Loggers Pride Bar and Chain Oil
5 cases

112G
Loggers Pride Bar and Chain Oil
5 cases

112H
Loggers Pride Bar and Chain Oil
5 cases

112I
Loggers Pride Bar and Chain Oil
5 cases

112J
Loggers Pride Bar and Chain Oil
5 cases

112K
Loggers Pride Bar and Chain Oil
8 cases

113
Ameri step Hay Bale Ground Blind
.

114
Paslode 3 1/4" Framing Nails
8 1/2 boxes

115
DeWalt Transit Level
Model DW092, serial # 201464

116
Leather Harness with Hames
Standardbred size, black hames

117
28" Wooden Buggy Wheels
Steel rims

118
Air Sockets and Air Horn
.

119
Honda Gx120 Gas Engine
4 HP, good condition

120
Irwin 6" Bench Vise
.

121
3/4" Sioux Impact Wrench
.

121A
3/4" Sioux Impact Wrench
.

121B
3/4" Sioux Impact Wrench
.

122
1" Sioux Impact Wrench
.

123
1/2" Sioux Impact Wrench
.

123A
1/2" Sioux Impact Wrench
.

124
1/2" Sioux Impact Wrench
.

124A
1/2" Sioux Impact Wrench
.

124B
1/2" Sioux Impact Wrench
.

124C
1/2" Sioux Impact Wrench
.

124D
1/2" Sioux Impact Wrench
.

124E
1/2" Sioux Impact Wrench
.

124F
1/2" Sioux Impact Wrench
.

124G
1/2" Sioux Impact Wrench
.

124H
1/2" Sioux Impact Wrench
.

124I
1/2" Sioux Impact Wrench
.

125
1/2" Sioux Composite Impact Wrench
.

125A
1/2" Sioux Composite Impact Wrench
.

125B
1/2" Sioux Composite Impact Wrench
.

125C
1/2" Sioux Composite Impact Wrench
.

125D
1/2" Sioux Composite Impact Wrench
.

125E
1/2" Sioux Composite Impact Wrench
.

125F
1/2" Sioux Composite Impact Wrench
.

125G
1/2" Sioux Composite Impact Wrench
.

125H
1/2" Sioux Composite Impact Wrench
.

125I
1/2" Sioux Composite Impact Wrench
.

125J
1/2" Sioux Composite Impact Wrench
.

125K
1/2" Sioux Composite Impact Wrench
.

125L
1/2" Sioux Composite Impact Wrench
.

125M
1/2" Sioux Composite Impact Wrench
.

125N
1/2" Sioux Composite Impact Wrench
.

125O
1/2" Sioux Composite Impact Wrench
.

125P
1/2" Sioux Composite Impact Wrench
.

125Q
1/2" Sioux Composite Impact Wrench
.

125R
1/2" Sioux Composite Impact Wrench
.

125S
1/2" Sioux Composite Impact Wrench
.

125T
1/2" Sioux Composite Impact Wrench
.

125U
1/2" Sioux Composite Impact Wrench
.

125V
1/2" Sioux Composite Impact Wrench
.

125W
1/2" Sioux Composite Impact Wrench
.

125X
1/2" Sioux Composite Impact Wrench
.

125Y
1/2" Sioux Composite Impact Wrench
.

126
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126A
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126B
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126C
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126D
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126E
Sioux Composite Impact with 7/16" Quick Change

127
Freud 8" Dado Set
.

128
Style and Rail Sets
1 1/4" arbor

129
Flexzilla Pressure Washer Hose
50'

130
Irwin Stanley Knife Blades
Total of 400

131
24" Pipe Clamps
4 total

132
16" Speed Clamps
2 total

133
8" Speed Clamps
2 total

134
24" Speed Clamps
3 total

135
12" Wooden Clamps
4 total

136
Assorted Clamps
6 total

137
12" Quick Grips
4 total

138
6" Quick Grips
8 total

139
36" Jorgensen Clamps
2 total, Jorgensen

140
24" Clamps
5 total

141
20" Jorgensen Clamps
4 total

142
Assorted Speed Clamps
2 total

143
Stanley Bailey Planer
# 5

144
Planer
.

145
Stanley Bailey Planer
# 6

146
Stanley Bailey Planer
# 220

147
Wooden Planer
.

148
Master Mechanic Planer
.

149
Stanley Bailey Planer
Made in England

150
Hand Draw
AMT

151
Hydraulic Motor
.

152
Gerotor Hydraulic Motor
Came off 18" Planer

153
Geroter Hydraulic Motor
.

154
Gast Air Motor
Came off power feeder

155
Assorted Hydraulic Hoses
.

156
Hydraulic Hoses
Came off a CR Onsrud pin router

157
Hydraulic Motor
.

158
Parker Hydraulic Motor
Came off a power feeder

159
Gresen Hydraulic Motor
Came off a power feeder

160
Gear Box 30:1 Pulley
.

161
DeWalt Air Powered
SDS Hammer Drill, works good

162
Ice Saw
no motor

163
Tablesaw Fence
.

164
Insulated Chimney
3- 4' sections

165
Sandpaper for Wide Belt
37" x 60", 40 Grit, 4 total

166
12" Wide Belt
.

167
Vickers Hydraulic Motor
Came off a tablesaw

168
Clutch
.

169
Maytag Motor
Runs good

169A
41" DeWalt Tool Chest and Roller Cabinet
15 drawer, ball bearing drawers, brand new

169B
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding

170
16" DC Fan
New

171
16" DC Fan
Like new

172
Gilmour Garden Hose
5/8" x 50'

173
Power trowel Blade Set Combination
8" x 18", new, total of 4

174
Power trowel Blade Set Float
10" x 18", new, total of 4

175
Power trowel Blade Set
8" x 18", new, total of 4

176
Garden Seeder
.

177
Garden Seeder
.

178
Paslode Framing Nailer
Model F-350-S, new

179
DeWalt Flexvolt Chainsaw
16" bar, new, charger and 9.0 AH battery included

180
Milwaukee 7 1/4" Circular Saw
2732-20, M18, tool only, new

181
Milwaukee 7 1/4" Circular Saw
M18, rear handle, like new

182
Valley Square
New

183
Milwaukee Tower Light
M18, tool only, new

184
Milwaukee Dual Powered Tower Light
New

185
Big Buddy Heater
New

186
18" Husquvarna
Reel Mower

187
Pro Com Wall Heater
30,000 BTU, vent free blue flame heater, new

188
Makita Concrete Vibrator
Shaft is twisted off

189
Kneeler Board
total of 2, n32

190
Milwaukee Pack Out
New

191
Post Pounder
.

192
Axe
.

193
240 Watt Solar Panel
Roof top kit, new

194
Spade and Shovel
.

195
Shovel Tamper Jobbers
.

196
3 Neck Ropes, 1Lead Rope, 1 Halter
.

196A
Banding Cart
3/4" steel banding

196B
Signode Banding Tool
Has auto feed for clips, was used for 3/4" banding

196C
3/4" Steel Banding
.

196D
Husqvarna Soff-Cut V-1000
In like new condition, Honda engine

196E
Wooden Carts on Casters
.

196F
Skate Rolls
37" x 120" & 37" x 112"

196G
3 Steel Door Slabs
36" x 83"

196H
6 Commercial Door Latches
.

196I
Pro Select Self Leveling Sealant
11 tubes

197
MK Tile Saw
Single phase, good condition

198
22" Toro Self Propelled Lawn Motor
.

199
Gravely Pro-50 Walk Behind Motor
Kawasaki engine, belt drive, not in working order

200
Target Concrete Saw
Serial # 348177, 9 HP Honda engine

201
Lifan Pro Series Generator
7250 Watt, 13 HP engine

202
Wood Fired Hot Water Heater
Slightly used

203
North Star Hot Water Pressure Washer
Less than a year old,

204
Bachtold Mower
30" mower deck, 11 HP Honda

205
Mini Barn
9'9" x 16' with 4' porch, 12' ceiling height, insulated, exterior will be completed

206
12' x 30' Mini Barn
Only 8' of floor, overall height 12'6", 2 doors, set up with 3 stalls for horses

207
14' Church Pews
Total of 10

208
Kohler Portable Genset
Cummins Big Cam engine, generator model 175R081, serial # 301382, 3 phase, 120/208V, 150 KW

208A
2014 Cat 299D Skid Steer
Serial # CAT0229DHGTE00692, 3180 hrs. full cab, heat/air, two speed, standard flow hydraulics, tracks have less than 100 hrs, just got serviced by certified Cat service shop, sells with 84" bucket, good condition 

208B
2010 Mustang 1650R Skid Steer
PIN MMC1650RB00191221, 69 HP, has only 775 hours, track conversion kit, excellent condition

209
50" Post Hole Digger
24" hole

210
50" Post Hole Digger
16" hole, has rock drill

211
50" Post Hole Digger
13" hole

212
7' x 3' x 2' Snow Plow
Attachment for skid loader

213
96" Turkey Dump Skid Steer Bucket
Will have new hydraulic hoses 

214
Taskmaster Trailer
7' x 20', has ramps, Dexter axles, electric brakes, good condition

215
Toro Zero Turn Mower
Smart Speed Control System, 48" deck, good working condition, Kohler engine

216
3 Head Baker Resaw With Return
Model BBR-O, serial # 97-2103, 20 HP electric motors on heads, 3/4" x 28" bandwheels, includes hydraulic pack, 6" wide x 12" capacity, good condition

217
Meadows 2 Blade Edger
Serial # 36D-1381X-89, 8' infeed, 7' 6" outfeed, 4" x 36" capacity, 16" blades, 1 moveable, new collar and mandrel, line shaft ready

218
Manual Chop Saw
13 HP Honda Engine, 6' infeed, 10' outfeed, 28" blade

219
Pallet Chief Pallet Nailer
60" max stringers x 48", hydraulic and air operated, transfer is electric, 4 Max CN70 nail guns

219A
Pallet Chief Stacker
Hydraulic drive

219B
Electric Motors For Pallet Chief
.

220
Newman K-20 Trim Saw
For parts or to rebuild

221
Bridgeport Milling Machine
No. 50773, serial # J-111258, hydraulic drive

222
Cat C7 Acert Engine
Serial # FMM15186, Arrangement # 298-6151, 330 HP, 6 cylinder, brand new never had oil

223
Cummins 6 Cylinder Power Unit
250 HP, has truck clutch, good working condition

224
Perkins Power Unit W/ Rockford Clutch
3 cylinder, approx. 40 HP, meter reads 4334 hrs. good condition

225
Deutz 4 Cylinder Power Unit
Model F4L 912, 54 HP, good condition

226
John Deere Power Unit
Model 4239 DF, serial # 04BB698150, meter reads 3858 hrs. does not sell with the cart that is pictured, good condition

227
54" McDonough Center Split Resaw
Serial # 54-1293, includes manuals

228
Fulghum 48" HFTD Chipper
Good condition, includes electric motor

229
Rotary DFBD Wood Hog
Good condition, has drop feed chute and waste belt.

229A
Marathon Electric Motor
60 HP, 1770 RPM

229B
Toshiba Electric Motor
150 HP, 1770 RPM, 444T frame

230
Corley Cab
.

231
Corley Cab
.

286
Suncast 30" x 60" Platform Cart, New in box
.

232
Mellott 2 Strand Conveyor
.

233
Mellott Rollcase
.

234
Mellott Belt Conveyor
18" x 20'

235
Bridge Crane
40' x 40', 14' clearance, power drive one way, gas motor

287
Suncast 30" x 60" Platform Cart, New in box
.

288
Suncast 30" x 60" Platform Cart, New in box
.

289
Suncast 30" x 60" Platform Cart, New in box
.

290
Suncast 30" x 60" Platform Cart, New in box
.

291
Suncast 30" x 60" Platform Cart, New in box
.

292
Suncast 30" x 60" Platform Cart, New in box
.

292A
Stonewood 14" Bandsaw
3/4 HP single phase, brand new

292B
Stonewood 14" Bandsaw
3/4 HP single phase, brand new, still in box not assembled

293
17’’ Oliver drill press, 110v NEW
.

294
14’’ Oliver drill press, 110V, NEW
.

295
Stonewood 4FT X 8FT Face frame table with pneumatic clamps, NEW
4' x 8'.

295A
Stonewood 4FT X 8FT Face frame table with manual clamps, NEW
4' x 8'

296
Stonewood 1 bag dust collector, 120V, NEW
.

297
Stonewood 2 bag dust collector, 220V, NEW
.

298
Nederman S-1000 Dust collector,230v/460v NEW
Has slight minor damage on frame from shipping. 230v/480v 3-ph.
This factory photo includes the dump bin. This dust system does NOT include the bottom dump bin.

299
Stonewood Lineshaft pocket hole machine, NEW
.

299A
20" Powermatic Planer
Model 221, serial # 2-6353, 8" capacity, helical cutter head, line shaft

300
SICMA RT 630 24" Planer
Serial # GC106, 220 V, 60 HZ, 11.5 HP

301
Whirlwind Upcut Saw, left hand
480 V, 3 phase

302
2006 Northtech 24" Planer
Model NT-24-10HCVS-XL, serial # 060094, 3 phase, 10 HP, 460 V, plates are broken on front side, but was being used like it is

303
Whirlwind Popup Saw
Serial ACCMIT001, 240 V, 3 phase

304
Industrial Popup Saw
250V, 3 phase, has two hand actuator

305
Powermatic 24" Planer
Model 225, serial # 82481, 480 V, 3 phase, 6" x 24"

306
Delta RC-63D 24" Planer
Model 22610, serial # 961, 230 V, 3 phase, 6" x 24"

307
Whirlwind Popup Saw
Model 212L, serial # 1269617L, 230/460V, 3 phase, 10 HP, 18" blade

308
Delta Rockwell 18" Planer
6" x 18", 230V, 5 HP, 3 phase

309
Shop Fox W1689 Wide Belt Sander
5 1/2" x 15" capacity, no drive, line shaft ready, feed belt has air motor

309A
Grizzly G9983 15" Wide Belt Sander
Serial # 94050603, 5 1/2" capacity, line shaft ready

310
Geetech Single Spindle Shaper
Model CT-102, serial # 206170138, 5 HP, 220 V, 1 1/4" arbor, does not include power feed

311
Comatic Power Feed
Model AF/38, mfg. # 20021300, single phase

312
Schleicher Vertical Boring Machine
Type Unidrill 25, #8047, holds 25 bits, 1 1/4" apart, 250 V, 3 phase

313
General 10" Table Saw
No drive, line shaft ready, includes guide and fence

314
Cantek 10" Table Saw
Model Canta12, serial # 200682, 230 V, 3 phase, 5 HP, includes guide and fence, good condition

315
Powermatic Jointer
Model 60, serial # 761501, 2 HP, 3 phase, 230/460 V, 8" cutter head

316
Rockwell Delta Jointer
no drive, 8" cutter head

317
Grizzly G9981 Overarm Router
Serial # 04228, 5 HP, 3 phase 220 V, good condition

318
Delta Model 20 Vertical Bandsaw
Serial # 00B86531, 230 V, 3 phase, 20" bandwheels, good condition

319
Centauro Compact Vertical Bandsaw
Model 600 CO, serial # 7452, 24" band wheels, 3 phase, latch is broken and electrical box is bent

320
2009 PTR Baler and Compactor
Model 360, serial # 084469, 230 V, 3 phase, makes 24" x 36" bales, good condition

321
Newman K-16
Serial # 11926, 12" blade, no drive

322
Holz Power Feed
#9582, type FC80, 220/440 V, 3 phase

323
Ritter Pocket Hole Machine
Model R200T, serial # 5224, 110 V, single phase

324
6" x 15" Planer
Model 4100, serial # 204592, hydraulic drive

325
Powermatic Planer
Model 220-B, serial # 5-5479, 8" x 20", 5 HP, 208 V

326
16" Manual Dovetail Machine
Serial # 2579, line shaft ready, 15 spindle

327
21" Manual Dovetail Machine
line shaft ready, 21 spindle

328
8" x 24" Planer
No drive

329
Lobo Horizontal Boring Machine
Holds 21 bits, 1 1/4" apart, 440 V electric motor

330
4 Sided Moulder
2" x 4" capacity, line shaft ready

331
Dayton Tradesman 20" Drill Press
Model 3Z919, 9 speed, 5/8" chuck, single phase, has damage but will try to have fixed

332
Ritter R-1000 Dovetail Machine
Single Phase, good condition

333
42" x 64" Glue Table
Air Clamps, good condition

334
Linvincible T100 Single Arbor Shaper
1" arbor

335
Grizzly 24" Drum Sander
Model G1066, 240 V, 6" x 24", 2 head, good condition

336
Larick Machinery Profile Sander
Model 360V, serial 1278, 1" arbor, hydraulic drive

337
Power Feed
Single phase

338
Grass Hinge Borer with UniPress
#9402510, 220 V, good condition

339
Sliding Table for Table Saw
.

340
Chen Sheng Planer
Model LS-24A, serial # 22008, 8" x 24", includes electric motor but needs installed

341
Shop Built Vertical Boring Machine
Holds 2 bits, adjust from 2"-3 3/8", air operated

342
Upcut Saw
240 V, 5 HP, 16" blade

343
Powermatic Router
Model 26, serial # 526117, 230 V, 3 phase, 2 HP, good condition

344
DeWalt Radial Arm Saw
Model GA, serial # 322013, 3 HP, 230 V

345
2012 Marin Line Boring Machine
Type TD 021, serial # M000108178, hydraulic drive, horizontal and vertical

346
Whirlwind Upcut Saw
Model 212L, serial # 1199539L, hydraulic drive

347
Tannewitz Vertical Band Saw
Serial # 0109850116, 16", line shaft ready, no table

348
Stone Double Spindle Sander
Model # SMHF406AO, serial # C05003, 2 HP, 220 V, single phase

349
Outfeed/Infeed for Upcut Saw
24" x 48" x 37" high

349A
12" Delta Planer
Electric drive

349B
Pellet Machine
Model MKL229

349C
T50350 Chop Saw
12" blade, air motor, mounted on bench

349D
T50350 Chop Saw
No motor

349E
Milford Rivet Machine
Model S-56, serial # 2182

350
14" Delta Rockwell Table Saw
Serial # 117-8842, electric drive

351
Castle Pocket Hole Machine
Serial # 20684, single phase, good condition

352
General International Table Saw
Includes fence and guide, no motor

353
Powermatic Table Saw
Model 65, serial # 0-1042, 2 HP, 3 phase, does not include power feed

354
Holz Her Power Feed
#41768, 220/440 V, 3 phase

355
Delta Rockwell 10" Tablesaw
2 HP, single phase, has guide and fence

356
Saw Stop 10" Table Saw
Model PCS31230, serial # P151431113, 3 HP, 230 V, single phase, very good condition

357
12" Jet Tilting Arbor Tablesaw
Model CTAA-12H-3LFR, stock # 708431, serial # 5012007, 5 HP, 3 ph, 220/440 V, includes guide and fence

358
Delta 10" Tilting Arbor Tablesaw
Serial # 01E29330, 230 V, 3 phase, includes guide and fence

359
Rockwell 10" Tablesaw
Series # 34-450, serial # EV-3626

359A
Delta Model 10 Contractors Saw
Air motor

360
34" x 49" Downdraft Table
Hydraulic drive

360A
Weinig 5 Head Moulder
Machine # GB9013, 220/440 V, 5 1/2" x 9" capacity, hydraulic drive, 1 1/2" arbor, includes box of cutter heads, table is broken off on outfeed side of moulder

360B
Lancaster Clamp
50" x 96" capacity, air cylinders

360C
SCMI T160 Single Arbor Shaper
1 1/4" arbor

360D
Orbital Sander
.

360E
Speed Cut Widebelt Sander
Model WBS3760, serial # 1428, 37" x 60" belt, 10 HP, 230 V, single phase, motor is a bit weak but they are still running full production with it

360F
Chang Iron CM-24K Planer
Spiral helical cutter head

360G
Grass Type ZPM Drawer Clamping Machine
(2) vertical pneumatic cylinders, Adjustable stops, Floor stand

 

360H
Piqua Series 30 Cardboard Baler
For making 30" tall bales
460 V, 3-Phase
 

360I
2006 Blue Steel Wide Belt Sander
Model PR-3775A Single head 36" Capacity 230V 3 phase
S/N: 051204

 

360J
Ritter R46 Double Line Borer
230V 3 phase Accurate ProScale
S/N: 1930


 

360K
Hess Case Clamp
Type: Korpusstand
New in 1985
Approx 5' X 8' capacity
Pneumatic
S/N: 2004630585
 

360M
Ritter Model R-46 Double Head Line Boring Machine
Two 23-spindle heads on 32mm centers
Two 3HP 3-phase 230v motors
Foot pedal actuation
Four spring hold-downs
Two air hole locators
Two adjustable stops on rear fence

 

360L
Hitachi Thickness Planer
Capacity 12 5/32" X 1/8"
115V single phase
S/N: 010047
 

360N
Timesaver 37'' 3 Head Wide Belt sander
Model 237, drum, drum, combination head, 230v/460v
just got serviced by A & W Machinery 

360O
SCMI 52" Double Head Wide Belt sander
52''  (1st head is a drum, 2nd head is a combination head) 230v/460v

Just got serviced by A & W Machinery

360Q
Tagliabue 2 Head Belt Sander
44" belt, electric drive

360R
Timesaver 3 Head Belt Sander
37'' belts, steel drum on 1st head, rubber on middle head, platen 3rd head, line shaft ready

361
Timesavers 3 Head Wide Belt Sander
Model 137-3HP75, serial # 50910M, 37" belt,  Drum, Drum, combination head, good condition

360P
Accurra 25" Double Head Drum Sander
belt drive

361A
Timesaver Speed 52" Double Head Beltsander
Model 252-2, combination head

362
Northtech 2 Head Planer/Sander
Model RL-920PC, serial # 997025, 460 V, 37", spiral cutter head and finishing head, good condition

363
Jet 2 Head Wide Belt Sander
Model JWB-237H, serial # 88105, line shaft ready, air up and down with air clutch, digital readout, 37", has finishing head, good condition

364
AEM Single Head 37in Wide Belt Sander
Model 401-37 WOOD, serial # 8043, has finishing head, 20 HP electric motor, good condition

365
DMC Finesand Orbital Sander
Model FS110 PO, serial # SA/003739, 48" capacity

365A
Powermatic 37" Wide Belt sander, 230v
.

365B
Powermatic Line Boring Machine
Model CBM-21, serial # C405CBM21021, never did more than 40 cabinets, like new condition

365C
20" Grizzly 12 Speed Heavy Duty Floor Drill Press
Model G7948, 1.5 HP single phase

365D
Chicago Machine 36" Band Saw
Includes extra bands

365F
Powermatic LV150 (6") Double-Sided Edge Sander
(2) 12" x 33" side tables (one tilting)
End table
33" x 48" platen
4 kW, 230/460v, 3PH motor
s/n 8579705
 

365G
New York Blower
25HP, 230/460v, 3PH
Size 292

 

365H
New York Blower
25HP, 230/460v, 3PH
Size 292

 

365E
High Point Upcut Saw
.

365I
New York Blower
25HP, 230/460v, 3PH
Size 292

 

365J
New York Blower
25HP, 230/460v, 3PH
Size 292

 

366
Delta 20" Drill Press
Single phase, electric

367
Unique 2700 Door Machine
Model 2700, serial # 121896112

368
Diehl Straight-line Rip Saw
Chain is in good condition, 15 HP electric motor

369
Ekstrom-Carlson No. 434 Overhead Router
3 phase, electric

370
Ekstrom-Carlson No. 112-A Double Sided Oscillating Edge Sander
Serial # 62-539, 7 1/2 HP, 3 phase motor,

371
4' x 12' Clamp Table
.

372
Taylor JLT Door clamp
Model 79K-8-M, 38 1/2" x 8' capacity, very good condition

373
American Jointer
12" head, line shaft ready, guard is broken

374
Buss Planer
Type 44, serial # 4781, 8" x 30", 15 HP electric motor

375
Lancaster Box Clamp
Serial # 1200-B-485, air cylinder

376
Norfield Auto Framer
Serial # V85-111A, 208 V, 3 ph, 4 HP

377
Ekstrom-Carlson Double Arbor Shaper
Serial # 262-41, 1 1/8" arbor, 480 V, 5 HP motors on heads

378
Crouch 3 Head Shape/Sand Machine
250 V, 3 phase, 1 1/4" arbor

379
Edge Sander
5" belt, electric drive

380
D.A. Hochstetler Double End Cope Machine
3 HP electric motors

382
Northtech Straightline Ripsaw
Model SRS-12, serial # 0722010, 3 phase, 15 HP, 230 V, chain is worn

383
D.A. Hochstetler Double End Cope Machine
5 HP electric motors on heads

385
Grizzly Power Feed
4 speed, electric drive

386
Grizzly Power Feed
Single phase, electric

387
Holz Power Feed
220 V, 3 phase

387A
3 Roll Power Feed
Air Motor

388
Southworth Hydraulic Lift Table
30" x 72", on wheels, very good condition, 460 V, 3 phase

389
Router Table with Air Router
.

390
Ritter Horizontal Boring Machine
3/4 HP, single phase

391
Grutter Upcut Saw
Model 1600, serial #20104-1-1, electric 3 phase

392
Delta Shaper
1/2" arbor, no drive

393
Jet Jointer
7" cutter head, single phase electric

394
Cal-Hawk Jointer
6" cutter head, single phase electric

395
Delta Jointer
6" cutter head single phase electric

396
Grizzly 10" Table Saw
Model G1022, serial # 181749, has fence and guide

397
10" Sears/Craftsman Radial Arm Saw
Single phase electric

398
12" Craftsman Planer
4" x 12", 3 phase, electric

399
Aluminum Brake
Model B1050, 12" x 10'6"

400
Delta Horizontal Boring Machine
2 bits, single phase electric

401
Tablesaw
Has guide and fence, hydraulic drive

402
Delta Table Saw
Has guide and fence, hydraulic drive

403
Sears/Craftsman Planer Moulder
6" x 12" capacity, no drive

404
Delta Rockwell Radial Arm Saw
Hydraulic drive

405
5 Speed Drill Press
Single phase electric

406
Grizzly Dust Collector
Model G0548, 2 HP electric motor

407
Scroll Saw
No drive

408
Line Shaft
.

409
Shop Fox Single Arbor Shaper
3/4" arbor

410
Hegner Scroll Saw
Has hydraulic motor but needs reinstalled

411
Delta Model 34-555 Sliding Table Attachment
.

412
Drill Press
Single phase

413
Delta Drill Press
Serial # 103-346

414
Sears 10" Tablesaw
Electric single phase

415
Ritter Pocket Hole Machine
Electric single phase

416
Kreg Pocket Hole Machine
Air Powered

417
Kreg Pocket Hole Machine
Air Powered

418
Kreg Pocket Hole Machine
Air Powered

419
Air Separator Filter Dryer
.

420
Wood Press
Is used to put designs in wood, one has barb wire imprint, one has nail imprint, see pictures

421
Lift Rite Pallet Jack
Works

422
Shaper
1" arbor, hydraulic drive

423
Grizzly Jointer
6" cutterhead, air motor

424
6" Jointer
Electric drive

425
6" Jointer
No drive

426
8" Jointer
no drive

427
6"Jointer
No drive

428
Geetech 16" Double Surface Planer
Model CT-400D, serial #627217, 6" x 16"

429
Grizzly G0490 Jointer
Serial # GJ08-0537, 8" x 76", 220 V, single phase

430
Bridgewood Single Head Wide Belt Sander
Model BWS-13, serial # 95121991, 7.5 HP, 220 V, 3 phase, finishing head, 13 1/4" belt

431
Manual Dovetailing Machine
No drive

432
Delta X5 Tablesaw
Serial # 05D101187, 230 V, single phase, good condition

433
15" Grizzly Planer
Mode GO551, 3 HP, 220 V, single phase, max cutting height 6 1/8", good condition

434
2 Head Buffer/Sander
Air motor

435
Quincy Air Compressor
Model 340, serial # 6964845, size 4 x 3, includes hydraulic motor

436
Hitachi Sliding Chop Saw
14" blade, air motor

437
Hitachi Sliding Chop Saw
10" blade, air motor

438
Delta Chop Saw
Air motor

439
Grizzly G1495 Heavy-Duty Wood Lathe
Serial # 000096, spindle speeds 500-3270 RPM, air motor

440
Toyota Electric Truck
Model 7HBE30, serial # 7HBE30-69269, 6000 lbs. lift, 10" x 97 1/2" forks

441
Belt Sander
38" x 106" sliding table, 7 1/2" HP, 3 phase motor

442
Presto Hydraulic Lift Table
48" x 48"

442A
Presto Hydraulic Lift Table
48" x 48"

443
Work Bench
48" x 48" x 33" high

444
Dock Plate
26" x 72"

445
Lift Tables
40" x 80", total of 2

446
Ingersoll-Rand Air Compressor
Kohler gas engine

447
Quincy Air Compressor
Model QT-15, serial # 20040819-0166, 20 HP, 3 phase motor

448
26" Planer
No drive

449
Ocmac Press
2' x 17' base, 6 vertical air clamps

450
Whitney No. 177 Tablesaw
Serai # 15030

451
Drying Rack
.

451A
Drying Rack
.

451B
Drying Rack
.

452
Accura Sliding Table Shaper
Hydraulic drive

452A
Accura Single Arbor Shaper
Hydraulic drive

453
Grizzly Single Arbor Shaper
Hydraulic drive

454
Custom Clamp Rack
.

455
Door Clamp Table
.

456
Altendorf Sliding Table Saw
Type F-90, # 78-2-103, has scoring blade

457
Craftsman 12" Bandsaw
.

458
16" Bridgewood Jointer
Line shaft, good condition

459
20" Powermatic Planer
Up to 8" thick, hydraulic drive

460
Eagle Air Compressor
18.5 CFM, electric drive

461
8" Oliver Jointer
Electric drive

462
24" Woodmaster Planer
6" capacity, line shaft

463
Clamp Table
34" x 72", air clamps

464
Little Giant Clamp
Hydraulic cylinder

465
Dust Cyclone
20" x 64"

466
Steel Welding Table
29" x 90"

466A
Skid of Hydraulic Hoses
.

467
Multimatik 1200N-Copia
Electric drive, includes skid of profiles

468
Casadei Single Arbor Shaper
Model F/114, serial # 99-66-119, hydraulic drive, does not include power feed

469
4 Roll Power Feed
Hydraulic drive

470
Grizzly G1026 Single Arbor Shaper
Serial # 1434948, 1" arbor

471
DeWalt Compound Sliding Chop Saw
BP0500567, air operated, has the metal blade in it

472
Bench Grinder
With 5.5 Honda Engine

473
DeWalt Chop Saw
14" Wood Blade

474
Shaper Grizzly Cutter Heads
Panel cutter C2078, C2075, C2076, etc.

475
Metal Chop Saw
Speedway series

476
Pacific Heavy Duty Trash Pump
With hose, good condition, 7 HP Power Tech

477
Iron Horse Portable Air Compressor
1 HP electric, 125 PSI max

478
Porter Cable Dove Tail Jig- 16"
Model 5116, serial # 033861

479
Magnum Paint Sprayer
2 sprayers.

480
Timber Tough Chainsaw Guide
Good condition

481
Skin of Straps, Stakes, Nailguns
.

482
PVC Decking Parts and Miscellaneous
.

483
MVM 10" Blower
5" dust port, no drive

484
Framing Nails
7 boxes

484A
Paslode Nails
5 boxes of 3" framing nails

485
Bosch Miter Chopsaw
Electric, good condition

486
Box of Tape Measures, New Sky Hook
.

487
Stanley Fat Max Tape Measures
30'

488
Stanley Fat Max Tape Measures
25'

489
Stanley Fat Max Tape Measures
25'

490
Stanley Fat Max Tape Measures
25'

491
Stanley Fat Max Tape Measures
25'

492
Air Powered Fan
24" on stand

493
Skid of Chain Hoists
4 total

494
Craftsman Bandsaw
15" 2 speed, 1.5 HP, 14 5/8 throat depth

495
Preformax Benchtop Drill Press
10"

496
Chicago Electric Chop Saw
10"

497
Industrial Generator 8500M
Gas, condition unknown

498
Skid of SIP Seal Bonding Chalk, Building Supplies
.

499
Skid of Miscellaneous Building Supplies
.

500
Custom Built Shaper Table
Set up for belt drive

501
Moak Shaper
No drive motor

502
Drum Sander Woodmaster
Model # W3875, set up for pulley drive
Photo Gallery

Gallery 1 (2000 images)          Gallery 2 (325 images)
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend





Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Sponsored Links

Menno Hostetler

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
3155 Davis
Seymour, IA 52590
Sale Dates and Times
Thursday Jul 29, 2021 Completed
Sale Terms and Conditions

There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Listing Details
Good lineup of woodworking and sawmill equipment including, 10+ beltsanders, ( Timesavers, SCMI, Powermatic, AEM, and more) 10+ tablesaws, (SawStop, Delta, and more) joiners, shapers, moulders, boring machines, 3 head Baker Resaw, Cat skid steer, and much more. Call Myron @ 574.229.4341 to consign your equipment. Live, phone, and online bidding available. Call Dan Troyer with equipment questions 330.749.9478

00
Information Lot
We will start the auction at 9:00 AM CST. Everything sells in catalog order. We will be adding many more lots the day before the auction so keep checking back. Loadout terms, free loading, July 29th after auction till 7pm, & July 30th, 31st, No loading August 1st & 2nd, Free loading August 3rd, 4th, 5th, 6th, By appointment after August 6th. Everything must be removed by August 13th. Owner is willing to palletize and crate for a fee. Contact Menno 641-898-2248 for more information.

 

90
Marlin 22 L.R.
Serial # 72160514, semi-auto, has some rust

91
Ruger M77 22-250 ACK. IMP.
Serial # 73-99754, bolt action, stainless bull barrel

92
Savage Model 111 270 Win.
Serial # J309204, bolt action, Nikon scope

93
Thompson/Center Bone Collector 50 Cal. Muzzleloader
Serial # VEF0050, camo stock

94
2 Boxes of 270 Ammo
.

95
3 Boxes of 20 Gauge Ammo
.

96
125 Rounds 12 Gauge Ammo
.

97
Nikon Buckmasters II 3-9x40 Scope
BDC reticle 

98
Whitetail Classic 3-9x40 Scope
.

99
BSA Deerhunter Scope
.

100
Stihl MS 661C Chainsaw
24" bar, good working condition

101
Stihl MS 661 Chainsaw
24" bar, good working condition

102
Stihl 660 Chainsaw
24" bar, good working condition

103
Stihl 660 Chainsaw
24" bar, good working condition

103A
Stihl MS 660 Chainsaw
.

104
3 Chainsaw Guards
18"-24"

105
Stihl High Flow Kit
2 pieces

106
Chain Binders
2 pcs. 

107
Bolt Cutters
.

108
Stihl Bars
2- 24", 1 -20"

109
5/8" Choker Cables
2 pieces

110
5/8" Cable
.

111
Ridgid 3 1/2" Framing Nailer and Grease Gun
.

112
Loggers Pride Bar and Chain Oil
5 cases

112A
Loggers Pride Bar and Chain Oil
5 cases

112B
Loggers Pride Bar and Chain Oil
5 cases

112C
Loggers Pride Bar and Chain Oil
5 cases

112D
Loggers Pride Bar and Chain Oil
5 cases

112E
Loggers Pride Bar and Chain Oil
5 cases

112F
Loggers Pride Bar and Chain Oil
5 cases

112G
Loggers Pride Bar and Chain Oil
5 cases

112H
Loggers Pride Bar and Chain Oil
5 cases

112I
Loggers Pride Bar and Chain Oil
5 cases

112J
Loggers Pride Bar and Chain Oil
5 cases

112K
Loggers Pride Bar and Chain Oil
8 cases

113
Ameri step Hay Bale Ground Blind
.

114
Paslode 3 1/4" Framing Nails
8 1/2 boxes

115
DeWalt Transit Level
Model DW092, serial # 201464

116
Leather Harness with Hames
Standardbred size, black hames

117
28" Wooden Buggy Wheels
Steel rims

118
Air Sockets and Air Horn
.

119
Honda Gx120 Gas Engine
4 HP, good condition

120
Irwin 6" Bench Vise
.

121
3/4" Sioux Impact Wrench
.

121A
3/4" Sioux Impact Wrench
.

121B
3/4" Sioux Impact Wrench
.

122
1" Sioux Impact Wrench
.

123
1/2" Sioux Impact Wrench
.

123A
1/2" Sioux Impact Wrench
.

124
1/2" Sioux Impact Wrench
.

124A
1/2" Sioux Impact Wrench
.

124B
1/2" Sioux Impact Wrench
.

124C
1/2" Sioux Impact Wrench
.

124D
1/2" Sioux Impact Wrench
.

124E
1/2" Sioux Impact Wrench
.

124F
1/2" Sioux Impact Wrench
.

124G
1/2" Sioux Impact Wrench
.

124H
1/2" Sioux Impact Wrench
.

124I
1/2" Sioux Impact Wrench
.

125
1/2" Sioux Composite Impact Wrench
.

125A
1/2" Sioux Composite Impact Wrench
.

125B
1/2" Sioux Composite Impact Wrench
.

125C
1/2" Sioux Composite Impact Wrench
.

125D
1/2" Sioux Composite Impact Wrench
.

125E
1/2" Sioux Composite Impact Wrench
.

125F
1/2" Sioux Composite Impact Wrench
.

125G
1/2" Sioux Composite Impact Wrench
.

125H
1/2" Sioux Composite Impact Wrench
.

125I
1/2" Sioux Composite Impact Wrench
.

125J
1/2" Sioux Composite Impact Wrench
.

125K
1/2" Sioux Composite Impact Wrench
.

125L
1/2" Sioux Composite Impact Wrench
.

125M
1/2" Sioux Composite Impact Wrench
.

125N
1/2" Sioux Composite Impact Wrench
.

125O
1/2" Sioux Composite Impact Wrench
.

125P
1/2" Sioux Composite Impact Wrench
.

125Q
1/2" Sioux Composite Impact Wrench
.

125R
1/2" Sioux Composite Impact Wrench
.

125S
1/2" Sioux Composite Impact Wrench
.

125T
1/2" Sioux Composite Impact Wrench
.

125U
1/2" Sioux Composite Impact Wrench
.

125V
1/2" Sioux Composite Impact Wrench
.

125W
1/2" Sioux Composite Impact Wrench
.

125X
1/2" Sioux Composite Impact Wrench
.

125Y
1/2" Sioux Composite Impact Wrench
.

126
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126A
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126B
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126C
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126D
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126E
Sioux Composite Impact with 7/16" Quick Change

127
Freud 8" Dado Set
.

128
Style and Rail Sets
1 1/4" arbor

129
Flexzilla Pressure Washer Hose
50'

130
Irwin Stanley Knife Blades
Total of 400

131
24" Pipe Clamps
4 total

132
16" Speed Clamps
2 total

133
8" Speed Clamps
2 total

134
24" Speed Clamps
3 total

135
12" Wooden Clamps
4 total

136
Assorted Clamps
6 total

137
12" Quick Grips
4 total

138
6" Quick Grips
8 total

139
36" Jorgensen Clamps
2 total, Jorgensen

140
24" Clamps
5 total

141
20" Jorgensen Clamps
4 total

142
Assorted Speed Clamps
2 total

143
Stanley Bailey Planer
# 5

144
Planer
.

145
Stanley Bailey Planer
# 6

146
Stanley Bailey Planer
# 220

147
Wooden Planer
.

148
Master Mechanic Planer
.

149
Stanley Bailey Planer
Made in England

150
Hand Draw
AMT

151
Hydraulic Motor
.

152
Gerotor Hydraulic Motor
Came off 18" Planer

153
Geroter Hydraulic Motor
.

154
Gast Air Motor
Came off power feeder

155
Assorted Hydraulic Hoses
.

156
Hydraulic Hoses
Came off a CR Onsrud pin router

157
Hydraulic Motor
.

158
Parker Hydraulic Motor
Came off a power feeder

159
Gresen Hydraulic Motor
Came off a power feeder

160
Gear Box 30:1 Pulley
.

161
DeWalt Air Powered
SDS Hammer Drill, works good

162
Ice Saw
no motor

163
Tablesaw Fence
.

164
Insulated Chimney
3- 4' sections

165
Sandpaper for Wide Belt
37" x 60", 40 Grit, 4 total

166
12" Wide Belt
.

167
Vickers Hydraulic Motor
Came off a tablesaw

168
Clutch
.

169
Maytag Motor
Runs good

169A
41" DeWalt Tool Chest and Roller Cabinet
15 drawer, ball bearing drawers, brand new

169B
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding

170
16" DC Fan
New

171
16" DC Fan
Like new

172
Gilmour Garden Hose
5/8" x 50'

173
Power trowel Blade Set Combination
8" x 18", new, total of 4

174
Power trowel Blade Set Float
10" x 18", new, total of 4

175
Power trowel Blade Set
8" x 18", new, total of 4

176
Garden Seeder
.

177
Garden Seeder
.

178
Paslode Framing Nailer
Model F-350-S, new

179
DeWalt Flexvolt Chainsaw
16" bar, new, charger and 9.0 AH battery included

180
Milwaukee 7 1/4" Circular Saw
2732-20, M18, tool only, new

181
Milwaukee 7 1/4" Circular Saw
M18, rear handle, like new

182
Valley Square
New

183
Milwaukee Tower Light
M18, tool only, new

184
Milwaukee Dual Powered Tower Light
New

185
Big Buddy Heater
New

186
18" Husquvarna
Reel Mower

187
Pro Com Wall Heater
30,000 BTU, vent free blue flame heater, new

188
Makita Concrete Vibrator
Shaft is twisted off

189
Kneeler Board
total of 2, n32

190
Milwaukee Pack Out
New

191
Post Pounder
.

192
Axe
.

193
240 Watt Solar Panel
Roof top kit, new

194
Spade and Shovel
.

195
Shovel Tamper Jobbers
.

196
3 Neck Ropes, 1Lead Rope, 1 Halter
.

196A
Banding Cart
3/4" steel banding

196B
Signode Banding Tool
Has auto feed for clips, was used for 3/4" banding

196C
3/4" Steel Banding
.

196D
Husqvarna Soff-Cut V-1000
In like new condition, Honda engine

196E
Wooden Carts on Casters
.

196F
Skate Rolls
37" x 120" & 37" x 112"

196G
3 Steel Door Slabs
36" x 83"

196H
6 Commercial Door Latches
.

196I
Pro Select Self Leveling Sealant
11 tubes

197
MK Tile Saw
Single phase, good condition

198
22" Toro Self Propelled Lawn Motor
.

199
Gravely Pro-50 Walk Behind Motor
Kawasaki engine, belt drive, not in working order

200
Target Concrete Saw
Serial # 348177, 9 HP Honda engine

201
Lifan Pro Series Generator
7250 Watt, 13 HP engine

202
Wood Fired Hot Water Heater
Slightly used

203
North Star Hot Water Pressure Washer
Less than a year old,

204
Bachtold Mower
30" mower deck, 11 HP Honda

205
Mini Barn
9'9" x 16' with 4' porch, 12' ceiling height, insulated, exterior will be completed

206
12' x 30' Mini Barn
Only 8' of floor, overall height 12'6", 2 doors, set up with 3 stalls for horses

207
14' Church Pews
Total of 10

208
Kohler Portable Genset
Cummins Big Cam engine, generator model 175R081, serial # 301382, 3 phase, 120/208V, 150 KW

208A
2014 Cat 299D Skid Steer
Serial # CAT0229DHGTE00692, 3180 hrs. full cab, heat/air, two speed, standard flow hydraulics, tracks have less than 100 hrs, just got serviced by certified Cat service shop, sells with 84" bucket, good condition 

208B
2010 Mustang 1650R Skid Steer
PIN MMC1650RB00191221, 69 HP, has only 775 hours, track conversion kit, excellent condition

209
50" Post Hole Digger
24" hole

210
50" Post Hole Digger
16" hole, has rock drill

211
50" Post Hole Digger
13" hole

212
7' x 3' x 2' Snow Plow
Attachment for skid loader

213
96" Turkey Dump Skid Steer Bucket
Will have new hydraulic hoses 

214
Taskmaster Trailer
7' x 20', has ramps, Dexter axles, electric brakes, good condition

215
Toro Zero Turn Mower
Smart Speed Control System, 48" deck, good working condition, Kohler engine

216
3 Head Baker Resaw With Return
Model BBR-O, serial # 97-2103, 20 HP electric motors on heads, 3/4" x 28" bandwheels, includes hydraulic pack, 6" wide x 12" capacity, good condition

217
Meadows 2 Blade Edger
Serial # 36D-1381X-89, 8' infeed, 7' 6" outfeed, 4" x 36" capacity, 16" blades, 1 moveable, new collar and mandrel, line shaft ready

218
Manual Chop Saw
13 HP Honda Engine, 6' infeed, 10' outfeed, 28" blade

219
Pallet Chief Pallet Nailer
60" max stringers x 48", hydraulic and air operated, transfer is electric, 4 Max CN70 nail guns

219A
Pallet Chief Stacker
Hydraulic drive

219B
Electric Motors For Pallet Chief
.

220
Newman K-20 Trim Saw
For parts or to rebuild

221
Bridgeport Milling Machine
No. 50773, serial # J-111258, hydraulic drive

222
Cat C7 Acert Engine
Serial # FMM15186, Arrangement # 298-6151, 330 HP, 6 cylinder, brand new never had oil

223
Cummins 6 Cylinder Power Unit
250 HP, has truck clutch, good working condition

224
Perkins Power Unit W/ Rockford Clutch
3 cylinder, approx. 40 HP, meter reads 4334 hrs. good condition

225
Deutz 4 Cylinder Power Unit
Model F4L 912, 54 HP, good condition

226
John Deere Power Unit
Model 4239 DF, serial # 04BB698150, meter reads 3858 hrs. does not sell with the cart that is pictured, good condition

227
54" McDonough Center Split Resaw
Serial # 54-1293, includes manuals

228
Fulghum 48" HFTD Chipper
Good condition, includes electric motor

229
Rotary DFBD Wood Hog
Good condition, has drop feed chute and waste belt.

229A
Marathon Electric Motor
60 HP, 1770 RPM

229B
Toshiba Electric Motor
150 HP, 1770 RPM, 444T frame

230
Corley Cab
.

231
Corley Cab
.

286
Suncast 30" x 60" Platform Cart, New in box
.

232
Mellott 2 Strand Conveyor
.

233
Mellott Rollcase
.

234
Mellott Belt Conveyor
18" x 20'

235
Bridge Crane
40' x 40', 14' clearance, power drive one way, gas motor

287
Suncast 30" x 60" Platform Cart, New in box
.

288
Suncast 30" x 60" Platform Cart, New in box
.

289
Suncast 30" x 60" Platform Cart, New in box
.

290
Suncast 30" x 60" Platform Cart, New in box
.

291
Suncast 30" x 60" Platform Cart, New in box
.

292
Suncast 30" x 60" Platform Cart, New in box
.

292A
Stonewood 14" Bandsaw
3/4 HP single phase, brand new

292B
Stonewood 14" Bandsaw
3/4 HP single phase, brand new, still in box not assembled

293
17’’ Oliver drill press, 110v NEW
.

294
14’’ Oliver drill press, 110V, NEW
.

295
Stonewood 4FT X 8FT Face frame table with pneumatic clamps, NEW
4' x 8'.

295A
Stonewood 4FT X 8FT Face frame table with manual clamps, NEW
4' x 8'

296
Stonewood 1 bag dust collector, 120V, NEW
.

297
Stonewood 2 bag dust collector, 220V, NEW
.

298
Nederman S-1000 Dust collector,230v/460v NEW
Has slight minor damage on frame from shipping. 230v/480v 3-ph.
This factory photo includes the dump bin. This dust system does NOT include the bottom dump bin.

299
Stonewood Lineshaft pocket hole machine, NEW
.

299A
20" Powermatic Planer
Model 221, serial # 2-6353, 8" capacity, helical cutter head, line shaft

300
SICMA RT 630 24" Planer
Serial # GC106, 220 V, 60 HZ, 11.5 HP

301
Whirlwind Upcut Saw, left hand
480 V, 3 phase

302
2006 Northtech 24" Planer
Model NT-24-10HCVS-XL, serial # 060094, 3 phase, 10 HP, 460 V, plates are broken on front side, but was being used like it is

303
Whirlwind Popup Saw
Serial ACCMIT001, 240 V, 3 phase

304
Industrial Popup Saw
250V, 3 phase, has two hand actuator

305
Powermatic 24" Planer
Model 225, serial # 82481, 480 V, 3 phase, 6" x 24"

306
Delta RC-63D 24" Planer
Model 22610, serial # 961, 230 V, 3 phase, 6" x 24"

307
Whirlwind Popup Saw
Model 212L, serial # 1269617L, 230/460V, 3 phase, 10 HP, 18" blade

308
Delta Rockwell 18" Planer
6" x 18", 230V, 5 HP, 3 phase

309
Shop Fox W1689 Wide Belt Sander
5 1/2" x 15" capacity, no drive, line shaft ready, feed belt has air motor

309A
Grizzly G9983 15" Wide Belt Sander
Serial # 94050603, 5 1/2" capacity, line shaft ready

310
Geetech Single Spindle Shaper
Model CT-102, serial # 206170138, 5 HP, 220 V, 1 1/4" arbor, does not include power feed

311
Comatic Power Feed
Model AF/38, mfg. # 20021300, single phase

312
Schleicher Vertical Boring Machine
Type Unidrill 25, #8047, holds 25 bits, 1 1/4" apart, 250 V, 3 phase

313
General 10" Table Saw
No drive, line shaft ready, includes guide and fence

314
Cantek 10" Table Saw
Model Canta12, serial # 200682, 230 V, 3 phase, 5 HP, includes guide and fence, good condition

315
Powermatic Jointer
Model 60, serial # 761501, 2 HP, 3 phase, 230/460 V, 8" cutter head

316
Rockwell Delta Jointer
no drive, 8" cutter head

317
Grizzly G9981 Overarm Router
Serial # 04228, 5 HP, 3 phase 220 V, good condition

318
Delta Model 20 Vertical Bandsaw
Serial # 00B86531, 230 V, 3 phase, 20" bandwheels, good condition

319
Centauro Compact Vertical Bandsaw
Model 600 CO, serial # 7452, 24" band wheels, 3 phase, latch is broken and electrical box is bent

320
2009 PTR Baler and Compactor
Model 360, serial # 084469, 230 V, 3 phase, makes 24" x 36" bales, good condition

321
Newman K-16
Serial # 11926, 12" blade, no drive

322
Holz Power Feed
#9582, type FC80, 220/440 V, 3 phase

323
Ritter Pocket Hole Machine
Model R200T, serial # 5224, 110 V, single phase

324
6" x 15" Planer
Model 4100, serial # 204592, hydraulic drive

325
Powermatic Planer
Model 220-B, serial # 5-5479, 8" x 20", 5 HP, 208 V

326
16" Manual Dovetail Machine
Serial # 2579, line shaft ready, 15 spindle

327
21" Manual Dovetail Machine
line shaft ready, 21 spindle

328
8" x 24" Planer
No drive

329
Lobo Horizontal Boring Machine
Holds 21 bits, 1 1/4" apart, 440 V electric motor

330
4 Sided Moulder
2" x 4" capacity, line shaft ready

331
Dayton Tradesman 20" Drill Press
Model 3Z919, 9 speed, 5/8" chuck, single phase, has damage but will try to have fixed

332
Ritter R-1000 Dovetail Machine
Single Phase, good condition

333
42" x 64" Glue Table
Air Clamps, good condition

334
Linvincible T100 Single Arbor Shaper
1" arbor

335
Grizzly 24" Drum Sander
Model G1066, 240 V, 6" x 24", 2 head, good condition

336
Larick Machinery Profile Sander
Model 360V, serial 1278, 1" arbor, hydraulic drive

337
Power Feed
Single phase

338
Grass Hinge Borer with UniPress
#9402510, 220 V, good condition

339
Sliding Table for Table Saw
.

340
Chen Sheng Planer
Model LS-24A, serial # 22008, 8" x 24", includes electric motor but needs installed

341
Shop Built Vertical Boring Machine
Holds 2 bits, adjust from 2"-3 3/8", air operated

342
Upcut Saw
240 V, 5 HP, 16" blade

343
Powermatic Router
Model 26, serial # 526117, 230 V, 3 phase, 2 HP, good condition

344
DeWalt Radial Arm Saw
Model GA, serial # 322013, 3 HP, 230 V

345
2012 Marin Line Boring Machine
Type TD 021, serial # M000108178, hydraulic drive, horizontal and vertical

346
Whirlwind Upcut Saw
Model 212L, serial # 1199539L, hydraulic drive

347
Tannewitz Vertical Band Saw
Serial # 0109850116, 16", line shaft ready, no table

348
Stone Double Spindle Sander
Model # SMHF406AO, serial # C05003, 2 HP, 220 V, single phase

349
Outfeed/Infeed for Upcut Saw
24" x 48" x 37" high

349A
12" Delta Planer
Electric drive

349B
Pellet Machine
Model MKL229

349C
T50350 Chop Saw
12" blade, air motor, mounted on bench

349D
T50350 Chop Saw
No motor

349E
Milford Rivet Machine
Model S-56, serial # 2182

350
14" Delta Rockwell Table Saw
Serial # 117-8842, electric drive

351
Castle Pocket Hole Machine
Serial # 20684, single phase, good condition

352
General International Table Saw
Includes fence and guide, no motor

353
Powermatic Table Saw
Model 65, serial # 0-1042, 2 HP, 3 phase, does not include power feed

354
Holz Her Power Feed
#41768, 220/440 V, 3 phase

355
Delta Rockwell 10" Tablesaw
2 HP, single phase, has guide and fence

356
Saw Stop 10" Table Saw
Model PCS31230, serial # P151431113, 3 HP, 230 V, single phase, very good condition

357
12" Jet Tilting Arbor Tablesaw
Model CTAA-12H-3LFR, stock # 708431, serial # 5012007, 5 HP, 3 ph, 220/440 V, includes guide and fence

358
Delta 10" Tilting Arbor Tablesaw
Serial # 01E29330, 230 V, 3 phase, includes guide and fence

359
Rockwell 10" Tablesaw
Series # 34-450, serial # EV-3626

359A
Delta Model 10 Contractors Saw
Air motor

360
34" x 49" Downdraft Table
Hydraulic drive

360A
Weinig 5 Head Moulder
Machine # GB9013, 220/440 V, 5 1/2" x 9" capacity, hydraulic drive, 1 1/2" arbor, includes box of cutter heads, table is broken off on outfeed side of moulder

360B
Lancaster Clamp
50" x 96" capacity, air cylinders

360C
SCMI T160 Single Arbor Shaper
1 1/4" arbor

360D
Orbital Sander
.

360E
Speed Cut Widebelt Sander
Model WBS3760, serial # 1428, 37" x 60" belt, 10 HP, 230 V, single phase, motor is a bit weak but they are still running full production with it

360F
Chang Iron CM-24K Planer
Spiral helical cutter head

360G
Grass Type ZPM Drawer Clamping Machine
(2) vertical pneumatic cylinders, Adjustable stops, Floor stand

 

360H
Piqua Series 30 Cardboard Baler
For making 30" tall bales
460 V, 3-Phase
 

360I
2006 Blue Steel Wide Belt Sander
Model PR-3775A Single head 36" Capacity 230V 3 phase
S/N: 051204

 

360J
Ritter R46 Double Line Borer
230V 3 phase Accurate ProScale
S/N: 1930


 

360K
Hess Case Clamp
Type: Korpusstand
New in 1985
Approx 5' X 8' capacity
Pneumatic
S/N: 2004630585
 

360M
Ritter Model R-46 Double Head Line Boring Machine
Two 23-spindle heads on 32mm centers
Two 3HP 3-phase 230v motors
Foot pedal actuation
Four spring hold-downs
Two air hole locators
Two adjustable stops on rear fence

 

360L
Hitachi Thickness Planer
Capacity 12 5/32" X 1/8"
115V single phase
S/N: 010047
 

360N
Timesaver 37'' 3 Head Wide Belt sander
Model 237, drum, drum, combination head, 230v/460v
just got serviced by A & W Machinery 

360O
SCMI 52" Double Head Wide Belt sander
52''  (1st head is a drum, 2nd head is a combination head) 230v/460v

Just got serviced by A & W Machinery

360Q
Tagliabue 2 Head Belt Sander
44" belt, electric drive

360R
Timesaver 3 Head Belt Sander
37'' belts, steel drum on 1st head, rubber on middle head, platen 3rd head, line shaft ready

361
Timesavers 3 Head Wide Belt Sander
Model 137-3HP75, serial # 50910M, 37" belt,  Drum, Drum, combination head, good condition

360P
Accurra 25" Double Head Drum Sander
belt drive

361A
Timesaver Speed 52" Double Head Beltsander
Model 252-2, combination head

362
Northtech 2 Head Planer/Sander
Model RL-920PC, serial # 997025, 460 V, 37", spiral cutter head and finishing head, good condition

363
Jet 2 Head Wide Belt Sander
Model JWB-237H, serial # 88105, line shaft ready, air up and down with air clutch, digital readout, 37", has finishing head, good condition

364
AEM Single Head 37in Wide Belt Sander
Model 401-37 WOOD, serial # 8043, has finishing head, 20 HP electric motor, good condition

365
DMC Finesand Orbital Sander
Model FS110 PO, serial # SA/003739, 48" capacity

365A
Powermatic 37" Wide Belt sander, 230v
.

365B
Powermatic Line Boring Machine
Model CBM-21, serial # C405CBM21021, never did more than 40 cabinets, like new condition

365C
20" Grizzly 12 Speed Heavy Duty Floor Drill Press
Model G7948, 1.5 HP single phase

365D
Chicago Machine 36" Band Saw
Includes extra bands

365F
Powermatic LV150 (6") Double-Sided Edge Sander
(2) 12" x 33" side tables (one tilting)
End table
33" x 48" platen
4 kW, 230/460v, 3PH motor
s/n 8579705
 

365G
New York Blower
25HP, 230/460v, 3PH
Size 292

 

365H
New York Blower
25HP, 230/460v, 3PH
Size 292

 

365E
High Point Upcut Saw
.

365I
New York Blower
25HP, 230/460v, 3PH
Size 292

 

365J
New York Blower
25HP, 230/460v, 3PH
Size 292

 

366
Delta 20" Drill Press
Single phase, electric

367
Unique 2700 Door Machine
Model 2700, serial # 121896112

368
Diehl Straight-line Rip Saw
Chain is in good condition, 15 HP electric motor

369
Ekstrom-Carlson No. 434 Overhead Router
3 phase, electric

370
Ekstrom-Carlson No. 112-A Double Sided Oscillating Edge Sander
Serial # 62-539, 7 1/2 HP, 3 phase motor,

371
4' x 12' Clamp Table
.

372
Taylor JLT Door clamp
Model 79K-8-M, 38 1/2" x 8' capacity, very good condition

373
American Jointer
12" head, line shaft ready, guard is broken

374
Buss Planer
Type 44, serial # 4781, 8" x 30", 15 HP electric motor

375
Lancaster Box Clamp
Serial # 1200-B-485, air cylinder

376
Norfield Auto Framer
Serial # V85-111A, 208 V, 3 ph, 4 HP

377
Ekstrom-Carlson Double Arbor Shaper
Serial # 262-41, 1 1/8" arbor, 480 V, 5 HP motors on heads

378
Crouch 3 Head Shape/Sand Machine
250 V, 3 phase, 1 1/4" arbor

379
Edge Sander
5" belt, electric drive

380
D.A. Hochstetler Double End Cope Machine
3 HP electric motors

382
Northtech Straightline Ripsaw
Model SRS-12, serial # 0722010, 3 phase, 15 HP, 230 V, chain is worn

383
D.A. Hochstetler Double End Cope Machine
5 HP electric motors on heads

385
Grizzly Power Feed
4 speed, electric drive

386
Grizzly Power Feed
Single phase, electric

387
Holz Power Feed
220 V, 3 phase

387A
3 Roll Power Feed
Air Motor

388
Southworth Hydraulic Lift Table
30" x 72", on wheels, very good condition, 460 V, 3 phase

389
Router Table with Air Router
.

390
Ritter Horizontal Boring Machine
3/4 HP, single phase

391
Grutter Upcut Saw
Model 1600, serial #20104-1-1, electric 3 phase

392
Delta Shaper
1/2" arbor, no drive

393
Jet Jointer
7" cutter head, single phase electric

394
Cal-Hawk Jointer
6" cutter head, single phase electric

395
Delta Jointer
6" cutter head single phase electric

396
Grizzly 10" Table Saw
Model G1022, serial # 181749, has fence and guide

397
10" Sears/Craftsman Radial Arm Saw
Single phase electric

398
12" Craftsman Planer
4" x 12", 3 phase, electric

399
Aluminum Brake
Model B1050, 12" x 10'6"

400
Delta Horizontal Boring Machine
2 bits, single phase electric

401
Tablesaw
Has guide and fence, hydraulic drive

402
Delta Table Saw
Has guide and fence, hydraulic drive

403
Sears/Craftsman Planer Moulder
6" x 12" capacity, no drive

404
Delta Rockwell Radial Arm Saw
Hydraulic drive

405
5 Speed Drill Press
Single phase electric

406
Grizzly Dust Collector
Model G0548, 2 HP electric motor

407
Scroll Saw
No drive

408
Line Shaft
.

409
Shop Fox Single Arbor Shaper
3/4" arbor

410
Hegner Scroll Saw
Has hydraulic motor but needs reinstalled

411
Delta Model 34-555 Sliding Table Attachment
.

412
Drill Press
Single phase

413
Delta Drill Press
Serial # 103-346

414
Sears 10" Tablesaw
Electric single phase

415
Ritter Pocket Hole Machine
Electric single phase

416
Kreg Pocket Hole Machine
Air Powered

417
Kreg Pocket Hole Machine
Air Powered

418
Kreg Pocket Hole Machine
Air Powered

419
Air Separator Filter Dryer
.

420
Wood Press
Is used to put designs in wood, one has barb wire imprint, one has nail imprint, see pictures

421
Lift Rite Pallet Jack
Works

422
Shaper
1" arbor, hydraulic drive

423
Grizzly Jointer
6" cutterhead, air motor

424
6" Jointer
Electric drive

425
6" Jointer
No drive

426
8" Jointer
no drive

427
6"Jointer
No drive

428
Geetech 16" Double Surface Planer
Model CT-400D, serial #627217, 6" x 16"

429
Grizzly G0490 Jointer
Serial # GJ08-0537, 8" x 76", 220 V, single phase

430
Bridgewood Single Head Wide Belt Sander
Model BWS-13, serial # 95121991, 7.5 HP, 220 V, 3 phase, finishing head, 13 1/4" belt

431
Manual Dovetailing Machine
No drive

432
Delta X5 Tablesaw
Serial # 05D101187, 230 V, single phase, good condition

433
15" Grizzly Planer
Mode GO551, 3 HP, 220 V, single phase, max cutting height 6 1/8", good condition

434
2 Head Buffer/Sander
Air motor

435
Quincy Air Compressor
Model 340, serial # 6964845, size 4 x 3, includes hydraulic motor

436
Hitachi Sliding Chop Saw
14" blade, air motor

437
Hitachi Sliding Chop Saw
10" blade, air motor

438
Delta Chop Saw
Air motor

439
Grizzly G1495 Heavy-Duty Wood Lathe
Serial # 000096, spindle speeds 500-3270 RPM, air motor

440
Toyota Electric Truck
Model 7HBE30, serial # 7HBE30-69269, 6000 lbs. lift, 10" x 97 1/2" forks

441
Belt Sander
38" x 106" sliding table, 7 1/2" HP, 3 phase motor

442
Presto Hydraulic Lift Table
48" x 48"

442A
Presto Hydraulic Lift Table
48" x 48"

443
Work Bench
48" x 48" x 33" high

444
Dock Plate
26" x 72"

445
Lift Tables
40" x 80", total of 2

446
Ingersoll-Rand Air Compressor
Kohler gas engine

447
Quincy Air Compressor
Model QT-15, serial # 20040819-0166, 20 HP, 3 phase motor

448
26" Planer
No drive

449
Ocmac Press
2' x 17' base, 6 vertical air clamps

450
Whitney No. 177 Tablesaw
Serai # 15030

451
Drying Rack
.

451A
Drying Rack
.

451B
Drying Rack
.

452
Accura Sliding Table Shaper
Hydraulic drive

452A
Accura Single Arbor Shaper
Hydraulic drive

453
Grizzly Single Arbor Shaper
Hydraulic drive

454
Custom Clamp Rack
.

455
Door Clamp Table
.

456
Altendorf Sliding Table Saw
Type F-90, # 78-2-103, has scoring blade

457
Craftsman 12" Bandsaw
.

458
16" Bridgewood Jointer
Line shaft, good condition

459
20" Powermatic Planer
Up to 8" thick, hydraulic drive

460
Eagle Air Compressor
18.5 CFM, electric drive

461
8" Oliver Jointer
Electric drive

462
24" Woodmaster Planer
6" capacity, line shaft

463
Clamp Table
34" x 72", air clamps

464
Little Giant Clamp
Hydraulic cylinder

465
Dust Cyclone
20" x 64"

466
Steel Welding Table
29" x 90"

466A
Skid of Hydraulic Hoses
.

467
Multimatik 1200N-Copia
Electric drive, includes skid of profiles

468
Casadei Single Arbor Shaper
Model F/114, serial # 99-66-119, hydraulic drive, does not include power feed

469
4 Roll Power Feed
Hydraulic drive

470
Grizzly G1026 Single Arbor Shaper
Serial # 1434948, 1" arbor

471
DeWalt Compound Sliding Chop Saw
BP0500567, air operated, has the metal blade in it

472
Bench Grinder
With 5.5 Honda Engine

473
DeWalt Chop Saw
14" Wood Blade

474
Shaper Grizzly Cutter Heads
Panel cutter C2078, C2075, C2076, etc.

475
Metal Chop Saw
Speedway series

476
Pacific Heavy Duty Trash Pump
With hose, good condition, 7 HP Power Tech

477
Iron Horse Portable Air Compressor
1 HP electric, 125 PSI max

478
Porter Cable Dove Tail Jig- 16"
Model 5116, serial # 033861

479
Magnum Paint Sprayer
2 sprayers.

480
Timber Tough Chainsaw Guide
Good condition

481
Skin of Straps, Stakes, Nailguns
.

482
PVC Decking Parts and Miscellaneous
.

483
MVM 10" Blower
5" dust port, no drive

484
Framing Nails
7 boxes

484A
Paslode Nails
5 boxes of 3" framing nails

485
Bosch Miter Chopsaw
Electric, good condition

486
Box of Tape Measures, New Sky Hook
.

487
Stanley Fat Max Tape Measures
30'

488
Stanley Fat Max Tape Measures
25'

489
Stanley Fat Max Tape Measures
25'

490
Stanley Fat Max Tape Measures
25'

491
Stanley Fat Max Tape Measures
25'

492
Air Powered Fan
24" on stand

493
Skid of Chain Hoists
4 total

494
Craftsman Bandsaw
15" 2 speed, 1.5 HP, 14 5/8 throat depth

495
Preformax Benchtop Drill Press
10"

496
Chicago Electric Chop Saw
10"

497
Industrial Generator 8500M
Gas, condition unknown

498
Skid of SIP Seal Bonding Chalk, Building Supplies
.

499
Skid of Miscellaneous Building Supplies
.

500
Custom Built Shaper Table
Set up for belt drive

501
Moak Shaper
No drive motor

502
Drum Sander Woodmaster
Model # W3875, set up for pulley drive
Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Menno Hostetler
 Live Auction
 
Auction Date(s)
Thursday Jul 29, 2021 Completed
Auction Location

Seymour, IA 52590
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

There is a 13% buyer’s premium in effect for all purchases. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. All items must be paid within 7 business days. Payment terms: Cash, check, wire transfer, or any major credit card. (additional 2% CC fee will be charged for CC payments). All items are pick-up only. Smalls must be removed within 2 days. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.

 

 

 

 

 

 

 

Bidder Terms and Conditions

These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
 
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
 
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.
 
 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
 
  1. Auction Conducted in the State of Indiana.
 
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
 
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.
 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.
 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
 
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
 
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
 
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
 
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
 
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
 
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
 
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
 
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
 
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
 
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
 
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
 
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
 
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
 
    1. Online Bids. Online bids may not be reduced or retracted.
 
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
 
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
 
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
 
  1.  
 
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
 
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
 
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
 
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
 
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
 
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
 
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
 
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
 
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
 
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
 
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
 
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
 
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
 
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
 
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
 
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
 
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
 
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
 
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
 
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
 
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

 
Good lineup of woodworking and sawmill equipment including, 10+ beltsanders, ( Timesavers, SCMI, Powermatic, AEM, and more) 10+ tablesaws, (SawStop, Delta, and more) joiners, shapers, moulders, boring machines, 3 head Baker Resaw, Cat skid steer, and much more. Call Myron @ 574.229.4341 to consign your equipment. Live, phone, and online bidding available. Call Dan Troyer with equipment questions 330.749.9478

00
Information Lot
We will start the auction at 9:00 AM CST. Everything sells in catalog order. We will be adding many more lots the day before the auction so keep checking back. Loadout terms, free loading, July 29th after auction till 7pm, & July 30th, 31st, No loading August 1st & 2nd, Free loading August 3rd, 4th, 5th, 6th, By appointment after August 6th. Everything must be removed by August 13th. Owner is willing to palletize and crate for a fee. Contact Menno 641-898-2248 for more information.

 

90
Marlin 22 L.R.
Serial # 72160514, semi-auto, has some rust

91
Ruger M77 22-250 ACK. IMP.
Serial # 73-99754, bolt action, stainless bull barrel

92
Savage Model 111 270 Win.
Serial # J309204, bolt action, Nikon scope

93
Thompson/Center Bone Collector 50 Cal. Muzzleloader
Serial # VEF0050, camo stock

94
2 Boxes of 270 Ammo
.

95
3 Boxes of 20 Gauge Ammo
.

96
125 Rounds 12 Gauge Ammo
.

97
Nikon Buckmasters II 3-9x40 Scope
BDC reticle 

98
Whitetail Classic 3-9x40 Scope
.

99
BSA Deerhunter Scope
.

100
Stihl MS 661C Chainsaw
24" bar, good working condition

101
Stihl MS 661 Chainsaw
24" bar, good working condition

102
Stihl 660 Chainsaw
24" bar, good working condition

103
Stihl 660 Chainsaw
24" bar, good working condition

103A
Stihl MS 660 Chainsaw
.

104
3 Chainsaw Guards
18"-24"

105
Stihl High Flow Kit
2 pieces

106
Chain Binders
2 pcs. 

107
Bolt Cutters
.

108
Stihl Bars
2- 24", 1 -20"

109
5/8" Choker Cables
2 pieces

110
5/8" Cable
.

111
Ridgid 3 1/2" Framing Nailer and Grease Gun
.

112
Loggers Pride Bar and Chain Oil
5 cases

112A
Loggers Pride Bar and Chain Oil
5 cases

112B
Loggers Pride Bar and Chain Oil
5 cases

112C
Loggers Pride Bar and Chain Oil
5 cases

112D
Loggers Pride Bar and Chain Oil
5 cases

112E
Loggers Pride Bar and Chain Oil
5 cases

112F
Loggers Pride Bar and Chain Oil
5 cases

112G
Loggers Pride Bar and Chain Oil
5 cases

112H
Loggers Pride Bar and Chain Oil
5 cases

112I
Loggers Pride Bar and Chain Oil
5 cases

112J
Loggers Pride Bar and Chain Oil
5 cases

112K
Loggers Pride Bar and Chain Oil
8 cases

113
Ameri step Hay Bale Ground Blind
.

114
Paslode 3 1/4" Framing Nails
8 1/2 boxes

115
DeWalt Transit Level
Model DW092, serial # 201464

116
Leather Harness with Hames
Standardbred size, black hames

117
28" Wooden Buggy Wheels
Steel rims

118
Air Sockets and Air Horn
.

119
Honda Gx120 Gas Engine
4 HP, good condition

120
Irwin 6" Bench Vise
.

121
3/4" Sioux Impact Wrench
.

121A
3/4" Sioux Impact Wrench
.

121B
3/4" Sioux Impact Wrench
.

122
1" Sioux Impact Wrench
.

123
1/2" Sioux Impact Wrench
.

123A
1/2" Sioux Impact Wrench
.

124
1/2" Sioux Impact Wrench
.

124A
1/2" Sioux Impact Wrench
.

124B
1/2" Sioux Impact Wrench
.

124C
1/2" Sioux Impact Wrench
.

124D
1/2" Sioux Impact Wrench
.

124E
1/2" Sioux Impact Wrench
.

124F
1/2" Sioux Impact Wrench
.

124G
1/2" Sioux Impact Wrench
.

124H
1/2" Sioux Impact Wrench
.

124I
1/2" Sioux Impact Wrench
.

125
1/2" Sioux Composite Impact Wrench
.

125A
1/2" Sioux Composite Impact Wrench
.

125B
1/2" Sioux Composite Impact Wrench
.

125C
1/2" Sioux Composite Impact Wrench
.

125D
1/2" Sioux Composite Impact Wrench
.

125E
1/2" Sioux Composite Impact Wrench
.

125F
1/2" Sioux Composite Impact Wrench
.

125G
1/2" Sioux Composite Impact Wrench
.

125H
1/2" Sioux Composite Impact Wrench
.

125I
1/2" Sioux Composite Impact Wrench
.

125J
1/2" Sioux Composite Impact Wrench
.

125K
1/2" Sioux Composite Impact Wrench
.

125L
1/2" Sioux Composite Impact Wrench
.

125M
1/2" Sioux Composite Impact Wrench
.

125N
1/2" Sioux Composite Impact Wrench
.

125O
1/2" Sioux Composite Impact Wrench
.

125P
1/2" Sioux Composite Impact Wrench
.

125Q
1/2" Sioux Composite Impact Wrench
.

125R
1/2" Sioux Composite Impact Wrench
.

125S
1/2" Sioux Composite Impact Wrench
.

125T
1/2" Sioux Composite Impact Wrench
.

125U
1/2" Sioux Composite Impact Wrench
.

125V
1/2" Sioux Composite Impact Wrench
.

125W
1/2" Sioux Composite Impact Wrench
.

125X
1/2" Sioux Composite Impact Wrench
.

125Y
1/2" Sioux Composite Impact Wrench
.

126
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126A
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126B
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126C
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126D
Sioux Composite Impact with 7/16" Quick Change
Includes 1/2" chuck

126E
Sioux Composite Impact with 7/16" Quick Change

127
Freud 8" Dado Set
.

128
Style and Rail Sets
1 1/4" arbor

129
Flexzilla Pressure Washer Hose
50'

130
Irwin Stanley Knife Blades
Total of 400

131
24" Pipe Clamps
4 total

132
16" Speed Clamps
2 total

133
8" Speed Clamps
2 total

134
24" Speed Clamps
3 total

135
12" Wooden Clamps
4 total

136
Assorted Clamps
6 total

137
12" Quick Grips
4 total

138
6" Quick Grips
8 total

139
36" Jorgensen Clamps
2 total, Jorgensen

140
24" Clamps
5 total

141
20" Jorgensen Clamps
4 total

142
Assorted Speed Clamps
2 total

143
Stanley Bailey Planer
# 5

144
Planer
.

145
Stanley Bailey Planer
# 6

146
Stanley Bailey Planer
# 220

147
Wooden Planer
.

148
Master Mechanic Planer
.

149
Stanley Bailey Planer
Made in England

150
Hand Draw
AMT

151
Hydraulic Motor
.

152
Gerotor Hydraulic Motor
Came off 18" Planer

153
Geroter Hydraulic Motor
.

154
Gast Air Motor
Came off power feeder

155
Assorted Hydraulic Hoses
.

156
Hydraulic Hoses
Came off a CR Onsrud pin router

157
Hydraulic Motor
.

158
Parker Hydraulic Motor
Came off a power feeder

159
Gresen Hydraulic Motor
Came off a power feeder

160
Gear Box 30:1 Pulley
.

161
DeWalt Air Powered
SDS Hammer Drill, works good

162
Ice Saw
no motor

163
Tablesaw Fence
.

164
Insulated Chimney
3- 4' sections

165
Sandpaper for Wide Belt
37" x 60", 40 Grit, 4 total

166
12" Wide Belt
.

167
Vickers Hydraulic Motor
Came off a tablesaw

168
Clutch
.

169
Maytag Motor
Runs good

169A
41" DeWalt Tool Chest and Roller Cabinet
15 drawer, ball bearing drawers, brand new

169B
Manual Sealless Steel Strapping Tool
Model A333, works for 1/2", 5/8" or 3/4" banding

170
16" DC Fan
New

171
16" DC Fan
Like new

172
Gilmour Garden Hose
5/8" x 50'

173
Power trowel Blade Set Combination
8" x 18", new, total of 4

174
Power trowel Blade Set Float
10" x 18", new, total of 4

175
Power trowel Blade Set
8" x 18", new, total of 4

176
Garden Seeder
.

177
Garden Seeder
.

178
Paslode Framing Nailer
Model F-350-S, new

179
DeWalt Flexvolt Chainsaw
16" bar, new, charger and 9.0 AH battery included

180
Milwaukee 7 1/4" Circular Saw
2732-20, M18, tool only, new

181
Milwaukee 7 1/4" Circular Saw
M18, rear handle, like new

182
Valley Square
New

183
Milwaukee Tower Light
M18, tool only, new

184
Milwaukee Dual Powered Tower Light
New

185
Big Buddy Heater
New

186
18" Husquvarna
Reel Mower

187
Pro Com Wall Heater
30,000 BTU, vent free blue flame heater, new

188
Makita Concrete Vibrator
Shaft is twisted off

189
Kneeler Board
total of 2, n32

190
Milwaukee Pack Out
New

191
Post Pounder
.

192
Axe
.

193
240 Watt Solar Panel
Roof top kit, new

194
Spade and Shovel
.

195
Shovel Tamper Jobbers
.

196
3 Neck Ropes, 1Lead Rope, 1 Halter
.

196A
Banding Cart
3/4" steel banding

196B
Signode Banding Tool
Has auto feed for clips, was used for 3/4" banding

196C
3/4" Steel Banding
.

196D
Husqvarna Soff-Cut V-1000
In like new condition, Honda engine

196E
Wooden Carts on Casters
.

196F
Skate Rolls
37" x 120" & 37" x 112"

196G
3 Steel Door Slabs
36" x 83"

196H
6 Commercial Door Latches
.

196I
Pro Select Self Leveling Sealant
11 tubes

197
MK Tile Saw
Single phase, good condition

198
22" Toro Self Propelled Lawn Motor
.

199
Gravely Pro-50 Walk Behind Motor
Kawasaki engine, belt drive, not in working order

200
Target Concrete Saw
Serial # 348177, 9 HP Honda engine

201
Lifan Pro Series Generator
7250 Watt, 13 HP engine

202
Wood Fired Hot Water Heater
Slightly used

203
North Star Hot Water Pressure Washer
Less than a year old,

204
Bachtold Mower
30" mower deck, 11 HP Honda

205
Mini Barn
9'9" x 16' with 4' porch, 12' ceiling height, insulated, exterior will be completed

206
12' x 30' Mini Barn
Only 8' of floor, overall height 12'6", 2 doors, set up with 3 stalls for horses

207
14' Church Pews
Total of 10

208
Kohler Portable Genset
Cummins Big Cam engine, generator model 175R081, serial # 301382, 3 phase, 120/208V, 150 KW

208A
2014 Cat 299D Skid Steer
Serial # CAT0229DHGTE00692, 3180 hrs. full cab, heat/air, two speed, standard flow hydraulics, tracks have less than 100 hrs, just got serviced by certified Cat service shop, sells with 84" bucket, good condition 

208B
2010 Mustang 1650R Skid Steer
PIN MMC1650RB00191221, 69 HP, has only 775 hours, track conversion kit, excellent condition

209
50" Post Hole Digger
24" hole

210
50" Post Hole Digger
16" hole, has rock drill

211
50" Post Hole Digger
13" hole

212
7' x 3' x 2' Snow Plow
Attachment for skid loader

213
96" Turkey Dump Skid Steer Bucket
Will have new hydraulic hoses 

214
Taskmaster Trailer
7' x 20', has ramps, Dexter axles, electric brakes, good condition

215
Toro Zero Turn Mower
Smart Speed Control System, 48" deck, good working condition, Kohler engine

216
3 Head Baker Resaw With Return
Model BBR-O, serial # 97-2103, 20 HP electric motors on heads, 3/4" x 28" bandwheels, includes hydraulic pack, 6" wide x 12" capacity, good condition

217
Meadows 2 Blade Edger
Serial # 36D-1381X-89, 8' infeed, 7' 6" outfeed, 4" x 36" capacity, 16" blades, 1 moveable, new collar and mandrel, line shaft ready

218
Manual Chop Saw
13 HP Honda Engine, 6' infeed, 10' outfeed, 28" blade

219
Pallet Chief Pallet Nailer
60" max stringers x 48", hydraulic and air operated, transfer is electric, 4 Max CN70 nail guns

219A
Pallet Chief Stacker
Hydraulic drive

219B
Electric Motors For Pallet Chief
.

220
Newman K-20 Trim Saw
For parts or to rebuild

221
Bridgeport Milling Machine
No. 50773, serial # J-111258, hydraulic drive

222
Cat C7 Acert Engine
Serial # FMM15186, Arrangement # 298-6151, 330 HP, 6 cylinder, brand new never had oil

223
Cummins 6 Cylinder Power Unit
250 HP, has truck clutch, good working condition

224
Perkins Power Unit W/ Rockford Clutch
3 cylinder, approx. 40 HP, meter reads 4334 hrs. good condition

225
Deutz 4 Cylinder Power Unit
Model F4L 912, 54 HP, good condition

226
John Deere Power Unit
Model 4239 DF, serial # 04BB698150, meter reads 3858 hrs. does not sell with the cart that is pictured, good condition

227
54" McDonough Center Split Resaw
Serial # 54-1293, includes manuals

228
Fulghum 48" HFTD Chipper
Good condition, includes electric motor

229
Rotary DFBD Wood Hog
Good condition, has drop feed chute and waste belt.

229A
Marathon Electric Motor
60 HP, 1770 RPM

229B
Toshiba Electric Motor
150 HP, 1770 RPM, 444T frame

230
Corley Cab
.

231
Corley Cab
.

286
Suncast 30" x 60" Platform Cart, New in box
.

232
Mellott 2 Strand Conveyor
.

233
Mellott Rollcase
.

234
Mellott Belt Conveyor
18" x 20'

235
Bridge Crane
40' x 40', 14' clearance, power drive one way, gas motor

287
Suncast 30" x 60" Platform Cart, New in box
.

288
Suncast 30" x 60" Platform Cart, New in box
.

289
Suncast 30" x 60" Platform Cart, New in box
.

290
Suncast 30" x 60" Platform Cart, New in box
.

291
Suncast 30" x 60" Platform Cart, New in box
.

292
Suncast 30" x 60" Platform Cart, New in box
.

292A
Stonewood 14" Bandsaw
3/4 HP single phase, brand new

292B
Stonewood 14" Bandsaw
3/4 HP single phase, brand new, still in box not assembled

293
17’’ Oliver drill press, 110v NEW
.

294
14’’ Oliver drill press, 110V, NEW
.

295
Stonewood 4FT X 8FT Face frame table with pneumatic clamps, NEW
4' x 8'.

295A
Stonewood 4FT X 8FT Face frame table with manual clamps, NEW
4' x 8'

296
Stonewood 1 bag dust collector, 120V, NEW
.

297
Stonewood 2 bag dust collector, 220V, NEW
.

298
Nederman S-1000 Dust collector,230v/460v NEW
Has slight minor damage on frame from shipping. 230v/480v 3-ph.
This factory photo includes the dump bin. This dust system does NOT include the bottom dump bin.

299
Stonewood Lineshaft pocket hole machine, NEW
.

299A
20" Powermatic Planer
Model 221, serial # 2-6353, 8" capacity, helical cutter head, line shaft

300
SICMA RT 630 24" Planer
Serial # GC106, 220 V, 60 HZ, 11.5 HP

301
Whirlwind Upcut Saw, left hand
480 V, 3 phase

302
2006 Northtech 24" Planer
Model NT-24-10HCVS-XL, serial # 060094, 3 phase, 10 HP, 460 V, plates are broken on front side, but was being used like it is

303
Whirlwind Popup Saw
Serial ACCMIT001, 240 V, 3 phase

304
Industrial Popup Saw
250V, 3 phase, has two hand actuator

305
Powermatic 24" Planer
Model 225, serial # 82481, 480 V, 3 phase, 6" x 24"

306
Delta RC-63D 24" Planer
Model 22610, serial # 961, 230 V, 3 phase, 6" x 24"

307
Whirlwind Popup Saw
Model 212L, serial # 1269617L, 230/460V, 3 phase, 10 HP, 18" blade

308
Delta Rockwell 18" Planer
6" x 18", 230V, 5 HP, 3 phase

309
Shop Fox W1689 Wide Belt Sander
5 1/2" x 15" capacity, no drive, line shaft ready, feed belt has air motor

309A
Grizzly G9983 15" Wide Belt Sander
Serial # 94050603, 5 1/2" capacity, line shaft ready

310
Geetech Single Spindle Shaper
Model CT-102, serial # 206170138, 5 HP, 220 V, 1 1/4" arbor, does not include power feed

311
Comatic Power Feed
Model AF/38, mfg. # 20021300, single phase

312
Schleicher Vertical Boring Machine
Type Unidrill 25, #8047, holds 25 bits, 1 1/4" apart, 250 V, 3 phase

313
General 10" Table Saw
No drive, line shaft ready, includes guide and fence

314
Cantek 10" Table Saw
Model Canta12, serial # 200682, 230 V, 3 phase, 5 HP, includes guide and fence, good condition

315
Powermatic Jointer
Model 60, serial # 761501, 2 HP, 3 phase, 230/460 V, 8" cutter head

316
Rockwell Delta Jointer
no drive, 8" cutter head

317
Grizzly G9981 Overarm Router
Serial # 04228, 5 HP, 3 phase 220 V, good condition

318
Delta Model 20 Vertical Bandsaw
Serial # 00B86531, 230 V, 3 phase, 20" bandwheels, good condition

319
Centauro Compact Vertical Bandsaw
Model 600 CO, serial # 7452, 24" band wheels, 3 phase, latch is broken and electrical box is bent

320
2009 PTR Baler and Compactor
Model 360, serial # 084469, 230 V, 3 phase, makes 24" x 36" bales, good condition

321
Newman K-16
Serial # 11926, 12" blade, no drive

322
Holz Power Feed
#9582, type FC80, 220/440 V, 3 phase

323
Ritter Pocket Hole Machine
Model R200T, serial # 5224, 110 V, single phase

324
6" x 15" Planer
Model 4100, serial # 204592, hydraulic drive

325
Powermatic Planer
Model 220-B, serial # 5-5479, 8" x 20", 5 HP, 208 V

326
16" Manual Dovetail Machine
Serial # 2579, line shaft ready, 15 spindle

327
21" Manual Dovetail Machine
line shaft ready, 21 spindle

328
8" x 24" Planer
No drive

329
Lobo Horizontal Boring Machine
Holds 21 bits, 1 1/4" apart, 440 V electric motor

330
4 Sided Moulder
2" x 4" capacity, line shaft ready

331
Dayton Tradesman 20" Drill Press
Model 3Z919, 9 speed, 5/8" chuck, single phase, has damage but will try to have fixed

332
Ritter R-1000 Dovetail Machine
Single Phase, good condition

333
42" x 64" Glue Table
Air Clamps, good condition

334
Linvincible T100 Single Arbor Shaper
1" arbor

335
Grizzly 24" Drum Sander
Model G1066, 240 V, 6" x 24", 2 head, good condition

336
Larick Machinery Profile Sander
Model 360V, serial 1278, 1" arbor, hydraulic drive

337
Power Feed
Single phase

338
Grass Hinge Borer with UniPress
#9402510, 220 V, good condition

339
Sliding Table for Table Saw
.

340
Chen Sheng Planer
Model LS-24A, serial # 22008, 8" x 24", includes electric motor but needs installed

341
Shop Built Vertical Boring Machine
Holds 2 bits, adjust from 2"-3 3/8", air operated

342
Upcut Saw
240 V, 5 HP, 16" blade

343
Powermatic Router
Model 26, serial # 526117, 230 V, 3 phase, 2 HP, good condition

344
DeWalt Radial Arm Saw
Model GA, serial # 322013, 3 HP, 230 V

345
2012 Marin Line Boring Machine
Type TD 021, serial # M000108178, hydraulic drive, horizontal and vertical

346
Whirlwind Upcut Saw
Model 212L, serial # 1199539L, hydraulic drive

347
Tannewitz Vertical Band Saw
Serial # 0109850116, 16", line shaft ready, no table

348
Stone Double Spindle Sander
Model # SMHF406AO, serial # C05003, 2 HP, 220 V, single phase

349
Outfeed/Infeed for Upcut Saw
24" x 48" x 37" high

349A
12" Delta Planer
Electric drive

349B
Pellet Machine
Model MKL229

349C
T50350 Chop Saw
12" blade, air motor, mounted on bench

349D
T50350 Chop Saw
No motor

349E
Milford Rivet Machine
Model S-56, serial # 2182

350
14" Delta Rockwell Table Saw
Serial # 117-8842, electric drive

351
Castle Pocket Hole Machine
Serial # 20684, single phase, good condition

352
General International Table Saw
Includes fence and guide, no motor

353
Powermatic Table Saw
Model 65, serial # 0-1042, 2 HP, 3 phase, does not include power feed

354
Holz Her Power Feed
#41768, 220/440 V, 3 phase

355
Delta Rockwell 10" Tablesaw
2 HP, single phase, has guide and fence

356
Saw Stop 10" Table Saw
Model PCS31230, serial # P151431113, 3 HP, 230 V, single phase, very good condition

357
12" Jet Tilting Arbor Tablesaw
Model CTAA-12H-3LFR, stock # 708431, serial # 5012007, 5 HP, 3 ph, 220/440 V, includes guide and fence

358
Delta 10" Tilting Arbor Tablesaw
Serial # 01E29330, 230 V, 3 phase, includes guide and fence

359
Rockwell 10" Tablesaw
Series # 34-450, serial # EV-3626

359A
Delta Model 10 Contractors Saw
Air motor

360
34" x 49" Downdraft Table
Hydraulic drive

360A
Weinig 5 Head Moulder
Machine # GB9013, 220/440 V, 5 1/2" x 9" capacity, hydraulic drive, 1 1/2" arbor, includes box of cutter heads, table is broken off on outfeed side of moulder

360B
Lancaster Clamp
50" x 96" capacity, air cylinders

360C
SCMI T160 Single Arbor Shaper
1 1/4" arbor

360D
Orbital Sander
.

360E
Speed Cut Widebelt Sander
Model WBS3760, serial # 1428, 37" x 60" belt, 10 HP, 230 V, single phase, motor is a bit weak but they are still running full production with it

360F
Chang Iron CM-24K Planer
Spiral helical cutter head

360G
Grass Type ZPM Drawer Clamping Machine
(2) vertical pneumatic cylinders, Adjustable stops, Floor stand

 

360H
Piqua Series 30 Cardboard Baler
For making 30" tall bales
460 V, 3-Phase
 

360I
2006 Blue Steel Wide Belt Sander
Model PR-3775A Single head 36" Capacity 230V 3 phase
S/N: 051204

 

360J
Ritter R46 Double Line Borer
230V 3 phase Accurate ProScale
S/N: 1930


 

360K
Hess Case Clamp
Type: Korpusstand
New in 1985
Approx 5' X 8' capacity
Pneumatic
S/N: 2004630585
 

360M
Ritter Model R-46 Double Head Line Boring Machine
Two 23-spindle heads on 32mm centers
Two 3HP 3-phase 230v motors
Foot pedal actuation
Four spring hold-downs
Two air hole locators
Two adjustable stops on rear fence

 

360L
Hitachi Thickness Planer
Capacity 12 5/32" X 1/8"
115V single phase
S/N: 010047
 

360N
Timesaver 37'' 3 Head Wide Belt sander
Model 237, drum, drum, combination head, 230v/460v
just got serviced by A & W Machinery 

360O
SCMI 52" Double Head Wide Belt sander
52''  (1st head is a drum, 2nd head is a combination head) 230v/460v

Just got serviced by A & W Machinery

360Q
Tagliabue 2 Head Belt Sander
44" belt, electric drive

360R
Timesaver 3 Head Belt Sander
37'' belts, steel drum on 1st head, rubber on middle head, platen 3rd head, line shaft ready

361
Timesavers 3 Head Wide Belt Sander
Model 137-3HP75, serial # 50910M, 37" belt,  Drum, Drum, combination head, good condition

360P
Accurra 25" Double Head Drum Sander
belt drive

361A
Timesaver Speed 52" Double Head Beltsander
Model 252-2, combination head

362
Northtech 2 Head Planer/Sander
Model RL-920PC, serial # 997025, 460 V, 37", spiral cutter head and finishing head, good condition

363
Jet 2 Head Wide Belt Sander
Model JWB-237H, serial # 88105, line shaft ready, air up and down with air clutch, digital readout, 37", has finishing head, good condition

364
AEM Single Head 37in Wide Belt Sander
Model 401-37 WOOD, serial # 8043, has finishing head, 20 HP electric motor, good condition

365
DMC Finesand Orbital Sander
Model FS110 PO, serial # SA/003739, 48" capacity

365A
Powermatic 37" Wide Belt sander, 230v
.

365B
Powermatic Line Boring Machine
Model CBM-21, serial # C405CBM21021, never did more than 40 cabinets, like new condition

365C
20" Grizzly 12 Speed Heavy Duty Floor Drill Press
Model G7948, 1.5 HP single phase

365D
Chicago Machine 36" Band Saw
Includes extra bands

365F
Powermatic LV150 (6") Double-Sided Edge Sander
(2) 12" x 33" side tables (one tilting)
End table
33" x 48" platen
4 kW, 230/460v, 3PH motor
s/n 8579705
 

365G
New York Blower
25HP, 230/460v, 3PH
Size 292

 

365H
New York Blower
25HP, 230/460v, 3PH
Size 292

 

365E
High Point Upcut Saw
.

365I
New York Blower
25HP, 230/460v, 3PH
Size 292

 

365J
New York Blower
25HP, 230/460v, 3PH
Size 292

 

366
Delta 20" Drill Press
Single phase, electric

367
Unique 2700 Door Machine
Model 2700, serial # 121896112

368
Diehl Straight-line Rip Saw
Chain is in good condition, 15 HP electric motor

369
Ekstrom-Carlson No. 434 Overhead Router
3 phase, electric

370
Ekstrom-Carlson No. 112-A Double Sided Oscillating Edge Sander
Serial # 62-539, 7 1/2 HP, 3 phase motor,

371
4' x 12' Clamp Table
.

372
Taylor JLT Door clamp
Model 79K-8-M, 38 1/2" x 8' capacity, very good condition

373
American Jointer
12" head, line shaft ready, guard is broken

374
Buss Planer
Type 44, serial # 4781, 8" x 30", 15 HP electric motor

375
Lancaster Box Clamp
Serial # 1200-B-485, air cylinder

376
Norfield Auto Framer
Serial # V85-111A, 208 V, 3 ph, 4 HP

377
Ekstrom-Carlson Double Arbor Shaper
Serial # 262-41, 1 1/8" arbor, 480 V, 5 HP motors on heads

378
Crouch 3 Head Shape/Sand Machine
250 V, 3 phase, 1 1/4" arbor

379
Edge Sander
5" belt, electric drive

380
D.A. Hochstetler Double End Cope Machine
3 HP electric motors

382
Northtech Straightline Ripsaw
Model SRS-12, serial # 0722010, 3 phase, 15 HP, 230 V, chain is worn

383
D.A. Hochstetler Double End Cope Machine
5 HP electric motors on heads

385
Grizzly Power Feed
4 speed, electric drive

386
Grizzly Power Feed
Single phase, electric

387
Holz Power Feed
220 V, 3 phase

387A
3 Roll Power Feed
Air Motor

388
Southworth Hydraulic Lift Table
30" x 72", on wheels, very good condition, 460 V, 3 phase

389
Router Table with Air Router
.

390
Ritter Horizontal Boring Machine
3/4 HP, single phase

391
Grutter Upcut Saw
Model 1600, serial #20104-1-1, electric 3 phase

392
Delta Shaper
1/2" arbor, no drive

393
Jet Jointer
7" cutter head, single phase electric

394
Cal-Hawk Jointer
6" cutter head, single phase electric

395
Delta Jointer
6" cutter head single phase electric

396
Grizzly 10" Table Saw
Model G1022, serial # 181749, has fence and guide

397
10" Sears/Craftsman Radial Arm Saw
Single phase electric

398
12" Craftsman Planer
4" x 12", 3 phase, electric

399
Aluminum Brake
Model B1050, 12" x 10'6"

400
Delta Horizontal Boring Machine
2 bits, single phase electric

401
Tablesaw
Has guide and fence, hydraulic drive

402
Delta Table Saw
Has guide and fence, hydraulic drive

403
Sears/Craftsman Planer Moulder
6" x 12" capacity, no drive

404
Delta Rockwell Radial Arm Saw
Hydraulic drive

405
5 Speed Drill Press
Single phase electric

406
Grizzly Dust Collector
Model G0548, 2 HP electric motor

407
Scroll Saw
No drive

408
Line Shaft
.

409
Shop Fox Single Arbor Shaper
3/4" arbor

410
Hegner Scroll Saw
Has hydraulic motor but needs reinstalled

411
Delta Model 34-555 Sliding Table Attachment
.

412
Drill Press
Single phase

413
Delta Drill Press
Serial # 103-346

414
Sears 10" Tablesaw
Electric single phase

415
Ritter Pocket Hole Machine
Electric single phase

416
Kreg Pocket Hole Machine
Air Powered

417
Kreg Pocket Hole Machine
Air Powered

418
Kreg Pocket Hole Machine
Air Powered

419
Air Separator Filter Dryer
.

420
Wood Press
Is used to put designs in wood, one has barb wire imprint, one has nail imprint, see pictures

421
Lift Rite Pallet Jack
Works

422
Shaper
1" arbor, hydraulic drive

423
Grizzly Jointer
6" cutterhead, air motor

424
6" Jointer
Electric drive

425
6" Jointer
No drive

426
8" Jointer
no drive

427
6"Jointer
No drive

428
Geetech 16" Double Surface Planer
Model CT-400D, serial #627217, 6" x 16"

429
Grizzly G0490 Jointer
Serial # GJ08-0537, 8" x 76", 220 V, single phase

430
Bridgewood Single Head Wide Belt Sander
Model BWS-13, serial # 95121991, 7.5 HP, 220 V, 3 phase, finishing head, 13 1/4" belt

431
Manual Dovetailing Machine
No drive

432
Delta X5 Tablesaw
Serial # 05D101187, 230 V, single phase, good condition

433
15" Grizzly Planer
Mode GO551, 3 HP, 220 V, single phase, max cutting height 6 1/8", good condition

434
2 Head Buffer/Sander
Air motor

435
Quincy Air Compressor
Model 340, serial # 6964845, size 4 x 3, includes hydraulic motor

436
Hitachi Sliding Chop Saw
14" blade, air motor

437
Hitachi Sliding Chop Saw
10" blade, air motor

438
Delta Chop Saw
Air motor

439
Grizzly G1495 Heavy-Duty Wood Lathe
Serial # 000096, spindle speeds 500-3270 RPM, air motor

440
Toyota Electric Truck
Model 7HBE30, serial # 7HBE30-69269, 6000 lbs. lift, 10" x 97 1/2" forks

441
Belt Sander
38" x 106" sliding table, 7 1/2" HP, 3 phase motor

442
Presto Hydraulic Lift Table
48" x 48"

442A
Presto Hydraulic Lift Table
48" x 48"

443
Work Bench
48" x 48" x 33" high

444
Dock Plate
26" x 72"

445
Lift Tables
40" x 80", total of 2

446
Ingersoll-Rand Air Compressor
Kohler gas engine

447
Quincy Air Compressor
Model QT-15, serial # 20040819-0166, 20 HP, 3 phase motor

448
26" Planer
No drive

449
Ocmac Press
2' x 17' base, 6 vertical air clamps

450
Whitney No. 177 Tablesaw
Serai # 15030

451
Drying Rack
.

451A
Drying Rack
.

451B
Drying Rack
.

452
Accura Sliding Table Shaper
Hydraulic drive

452A
Accura Single Arbor Shaper
Hydraulic drive

453
Grizzly Single Arbor Shaper
Hydraulic drive

454
Custom Clamp Rack
.

455
Door Clamp Table
.

456
Altendorf Sliding Table Saw
Type F-90, # 78-2-103, has scoring blade

457
Craftsman 12" Bandsaw
.

458
16" Bridgewood Jointer
Line shaft, good condition

459
20" Powermatic Planer
Up to 8" thick, hydraulic drive

460
Eagle Air Compressor
18.5 CFM, electric drive

461
8" Oliver Jointer
Electric drive

462
24" Woodmaster Planer
6" capacity, line shaft

463
Clamp Table
34" x 72", air clamps

464
Little Giant Clamp
Hydraulic cylinder

465
Dust Cyclone
20" x 64"

466
Steel Welding Table
29" x 90"

466A
Skid of Hydraulic Hoses
.

467
Multimatik 1200N-Copia
Electric drive, includes skid of profiles

468
Casadei Single Arbor Shaper
Model F/114, serial # 99-66-119, hydraulic drive, does not include power feed

469
4 Roll Power Feed
Hydraulic drive

470
Grizzly G1026 Single Arbor Shaper
Serial # 1434948, 1" arbor

471
DeWalt Compound Sliding Chop Saw
BP0500567, air operated, has the metal blade in it

472
Bench Grinder
With 5.5 Honda Engine

473
DeWalt Chop Saw
14" Wood Blade

474
Shaper Grizzly Cutter Heads
Panel cutter C2078, C2075, C2076, etc.

475
Metal Chop Saw
Speedway series

476
Pacific Heavy Duty Trash Pump
With hose, good condition, 7 HP Power Tech

477
Iron Horse Portable Air Compressor
1 HP electric, 125 PSI max

478
Porter Cable Dove Tail Jig- 16"
Model 5116, serial # 033861

479
Magnum Paint Sprayer
2 sprayers.

480
Timber Tough Chainsaw Guide
Good condition

481
Skin of Straps, Stakes, Nailguns
.

482
PVC Decking Parts and Miscellaneous
.

483
MVM 10" Blower
5" dust port, no drive

484
Framing Nails
7 boxes

484A
Paslode Nails
5 boxes of 3" framing nails

485
Bosch Miter Chopsaw
Electric, good condition

486
Box of Tape Measures, New Sky Hook
.

487
Stanley Fat Max Tape Measures
30'

488
Stanley Fat Max Tape Measures
25'

489
Stanley Fat Max Tape Measures
25'

490
Stanley Fat Max Tape Measures
25'

491
Stanley Fat Max Tape Measures
25'

492
Air Powered Fan
24" on stand

493
Skid of Chain Hoists
4 total

494
Craftsman Bandsaw
15" 2 speed, 1.5 HP, 14 5/8 throat depth

495
Preformax Benchtop Drill Press
10"

496
Chicago Electric Chop Saw
10"

497
Industrial Generator 8500M
Gas, condition unknown

498
Skid of SIP Seal Bonding Chalk, Building Supplies
.

499
Skid of Miscellaneous Building Supplies
.

500
Custom Built Shaper Table
Set up for belt drive

501
Moak Shaper
No drive motor

502
Drum Sander Woodmaster
Model # W3875, set up for pulley drive