Wood Working Shop Contents & More
Previous Page Listing ID#: 1293027

Auction Location

Ontario, NY 14519
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Tuesday May 11
Bidding Ends: Wednesday May 19
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Reynolds Auction Co., Inc.

Contact: David Koeberle
Phone: 315-597-8815
Email: office@reynoldsauction.com
Website: www.reynoldsauction.com

GoToAuction.com ID#: 4125
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidding with the Reynolds Auction Company, you accept the following terms and condition of this Auction: - NO SHIPPING - PICK UP ONLY - You may check with Brickhouse Antiques at 315-597-3883 for shipping smalls - All bidders are required to register prior to bidding on any item. -Bids cannot be retracted or changed once the auction begins. - All sales are final. Everything is sold "AS IS" with no guarantee or warrantee of any type including warrantee of merchantability and the purchaser by bidding on said item accepts that item without any such warrantee or guarantee and in a "AS IS" condition. It is the responsibility of the bidder to assure condition of items prior to bidding. We recommend an inspection of the lots prior to bidding. All condition reports given by the Reynolds Auction Co. are subjective and we will not be held responsible or liable for any errors in description including age, size, measurements, condition, rarity, importance or provenance,etc. We strive to give true, accurate descriptions on items but realize reports are subjective and are for informational purposes only. - A BUYERS PREMIUM OF 15% will be added to ALL purchases. - Credit card is the only method of payment for this auction. No other forms of payment will be taken. - Payment is due in full within the time limits posted in the auction. For this auction, all payment will be made through the credit card you provided when you registered. We accept Visa and MasterCard only. - 15% buyer's premium and NYS SALES TAX added to all items purchased. This is a new system, YOUR tax information MUST be entered BEFORE the auction closes. NO refunds will be made. - By bidding with our auction company, you are entering into a contract with our terms and conditions. You are accepting responsibility to perform your duties as winning bidder, and agreeing that the Reynolds Auction Co., its employees, officers, owners, representatives, agents, and consignors will not be held liable for any losses, claims, liabilities, judgments, expenses, fees, or other damages arising from the use of our services, website, auction property, and this site, including property damage, injuries, dispute with another bidder, or breach by bidder of this site. -All successful bidders will sign their receipt at the time of pick up indicating that all items are accounted for and in satisfactory condition. There will be No returns, refunds or exchanges on any items as this is an auction and not a retail situation. -Reynolds Auction Co. will not be held responsible for any delays or interruption in internet service, errors, and/or omissions, caused by any means and does not guarantee continual, uninterrupted or error free service or use of the site. -Reynolds Auction Co. has the right to suspend bidding, re-sell any item/lots for any reason and void any sale. -All sales are subject to appropriate SALES TAX and buyer's premium. Buyer's premium is 15% of purchase price on every item and is subject to sales tax. If you are tax exempt, you MUST indicate this when you REGISTER and provide a recent copy of the form BEFORE THE AUCTION CLOSES or you will be charged sales tax. Once the auction concludes we cannot remove sales tax after the credit card has been processed. -Bids cannot be retracted or changed once the auction begins. - NO SHIPPING IS OFFERED FOR THIS AUCTION - PICK UP ONLY. -All items in this auction must be picked up in the scheduled time frame. Please take notice of pick up time! If you cannot make pick up time, please have someone come on your behalf. There are no other times for removal. If you leave your without making arranements for pick, after 14 days, the item becomes the property of Reynolds Auction Co. and will disposed or resold and no refunds will be issued. -Reynolds Auction Co. is NOT liable for any damage to property left on the auction premises after the auction and pickup timeframe has concluded. Reynolds Auction Co. is NOT liable for any damage to property transported or stored, past the auction day and pick up time. No refunds will be issued for any items damaged after the auction and pickup time frames have ended. - No refunds or returns on any items sold in this auction.
Listing Information
Wood Working Shop Contents, Motorcycles (parts) & More Auction Bidding Starts, May 11, 2021 and Bidding Ends, Wednesday, May 19, 2021 at 7:00 PM EST with soft close - extended bidding; You can find the auction at https://reynoldsauctioncompany.hibid.com Resale Tax information must be entered no later than 4:00 PM EST, on the day the auction closes, if you do not provide the correct forms, tax will be charged and once charged will NOT be refunded. The sooner we receive the information, the better - Thank you. Pickup ONLY, Friday, May 21, 2021 from 10:00 AM - 6:00 PM EST, 616 State Route 104, Ontario, NY 14519 - ON SITE AUCTION - NO OTHER PICK UP TIME if you can't make it - YOU MUST make arrangements for someone else to pickup your items. BUYER REMOVES & LOADS - bring your own help, but loader assistance available. You must follow COVID19 restrictions and wear a mask; Large Pickups by Appointment ONLY - call Dave 315-945-1212 to schedule appointment. Only one purchaser allowed into the property at a time, due to accessibility issues. Avoid long lines, set an appointment.

485
Delta 12" portable planer
mobile table base

486
Delta 6" Deluxe jointer
model 37-190, mobile base

487
SSC panel saw
model H-4, 2.5 hp power unit

488
DeWalt DW 744 10" table saw
with folding table

489
Delta model 20 vertical band saw
220 volt, Buyer removes come prepared with help, loader assistance available.

490
Delta Unisaw
10" attached plywood Porter-Cable 7518 router extension table, Unifence, Buyer removes come prepared with help, loader assistance available.

491
Delta Shaper
Platinum Edition with Delta power feed, 230 volt, single phase, mobile base, Buyer removes come prepared with help, loader assistance available.

492
Bridgewood 200P planer
19" width, 220 volt, Buyer removes come prepared with help, loader assistance available.

493
Bridgewood Shaper
model BW310, Delta Industrial power feed, 8-speed, 4 rollers, 230 volt, Buyer removes come prepared with help, loader assistance available.

494
Jet dust collector
model DC-1200, 115/230 volt, buyer can take metal duct from collector to other machines in the shop; Buyer removes come prepared with help.

495
Jet air filtration system
110 volt, Buyer removes come prepared with help.

496
The Original Radial arm saw
10" diameter, 220 volt, Buyer removes come prepared with help, it is mounted between 2 wooden work tables!

497
Ridgid 10" chop saw
model R41121 with homemade dust collection system

498

499
Craftsman bench top drill press
with metal mobile cart

500
Devilbiss Pro 4000 upright air compressor
6.5 hp, 80 gallon, 220 volt, Buyer removes come prepared with help.


502
Clark Pneumatic tire fork lift
gas engine, runs & drives, needs proper size battery & seems to have a short in the electrical system, but it runs & operates, 11' height capacity with pair of 6' fork extensions

503
Kubota B7100 4 wheel drive tractor
with loader, diesel engine, odometer reads 0304 hours, 3 speed manual transmission, 3 pt hitch, PTO, seat is torn, runs & operates

504
Woods RM400 finish mower
4', 3 pt hitch, PTO driven, surface rust

505
Landa hot water industrial pressure washer
model PHWS 4-2000, hour meter reads 0035, 220 volt, Platinum series, hot water function not working last time used.

506
Craftsman 6300 watt generator
electric start, 11 horse power Briggs & Stratton engine, runs

507
Oxyacetylene torch set
hoses, gauges, tanks, cart, rod

508
Miller Dialarc 250 AC/DC welder
leads, helmet, rod, 220 volt

509
Toro 1132 walk behind snowblower
Briggs & Stratton engine, electric start, 32" sawth

510




514
2 floor jacks
1 1/2 ton & MVP Superlift


516
Perception 16' composition kayak
paddle, with Yakima rooftop kayak mount

517
Porter Cable pancake air compressor
150 psi, glass cover over gauges is broken

518
2 kerosene heaters
upright & Knipco torpedo heater

519
Composition lawn cart
30" x 46", pneumatic

520
3 sections pallet racking
19' 6" length, 4' width, 8' height, BUYER REMOVES, come prepared with help.

521
3 sections pallet racking
24' length, 4' 8" width, 12' height, BUYER REMOVES, come prepared with help.

522
Work bench
3' x 6' with under-shelf



525
Yamaha TT-R 90 dirt bike
VIN JYACB03Y32A013567, turns over but did not start

526
1982 Honda CB900F motorcycle - NO PAPERWORK
VIN JH2SC0104CM103537, 43,567 registered miles, NO PAPERWORK - PARTS ONLY

527
1982 Honda CB900F motorcycle
VIN JH2SC0102CM104511, 14,448 registered miles, NO P APERWORK, PARTS ONLY

528
1985 Honda Gold Wing GL1200 motorcycle
VIN 1HFSC1442FA100791, with paperwork, PARTS ONLY

528
1998 BMW R1200 motorcycle
VIN: WB10434A3WZA62649, parts have been removed, but it appears that most are there, as is, with title

529
1985 Honda Gold Wing motorcycle & parts
GL1-4013680, fairing, side panels, seat, etc., NO PAPERWORK

530
Motorcycle parts
exhaust pipes, back rest, CB900F side panels

531
2 attic fans
24" & 34", 30" fan shutter

532
Rocky Mountain bicycle
full suspension

533
2 Mountain bikes
Trick single track, bent front rim, bad tires & GT bike, parts???



536
2 wheel hand truck
pneumatic tires

537
2 wheel hand truck
pneumatic tires

538
Shop vac
16 gallon, no hoses

539
2 walk behind mowers
Huskee 21" sleft propelled & Craftsman



542
Wheel barrow & garden tools
rakes, shovel, hoe, sprayer, etc.

543
Kristi 5' x 8' enclosed trailer
single axle, rear swing door, some damage to roof top with dents - NO PAPERWORK, storage trailer only

544
10 x 10 outdoor shed
T-111 exterior, asphalt shingles, needs floor, existing floor rotted, BUYER REMOVES - allowed ONE WEEK to move!

545
Antique Monroe County map
mounted on fiber board, 58" x 58"

546
Lesco walk behind mower
Kawasaki engine, 52" cut, not running

547
Pressure Treated Tongue & Groove fence x13
69" x 93 1/2", comes with top grid panel, 16" x 93 1/2", x13

548
Pressure Treated fence x3
tongue & grove, 52 1/2" x 93 1/2", all with top piece, x3

549

550
80 pressure treated decorative post caps
designed to fit 4"x4" posts

551
20 pressure treated decorative post caps
designed to fit 6"x6" posts

552
20 pressure treated decorative post caps
designed to fit 6"x6" posts

553
20 pressure treated decorative post caps
designed to fit 6"x6" posts

554
23 pressure treated decorative post caps
designed to fit 6"x6" posts

555
32 pressure treated decorative post caps
designed to fit 4"x4" posts

556
32 pressure treated decorative post caps
designed to fit 4"x4" posts

557
10 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

558
10 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

559
10 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

560
12 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

561
pressure treated boards x 47
3/4" x 6" x 12', square edges, Buyer removes & loads, come prepared with help, x47

562
pressure treated boards x 160
3/4" x 6" x 12', square edges, Buyer removes & loads, come prepared with help, x160

563
215 pieces pressured treated fence boards
5/4" x 6" x 6' dog eared top, new, Buyer removes & loads, come prepared with help

564
20 Cedar split rail corner post
roughly 6' 6" length, 3 rail

565
20 Cedar split rail corner post
roughly 6' 6" length, 3 rail

566
20 Cedar split rail corner post
roughly 6' 6" length, 3 rail

567
20 Cedar split rail corner post
roughly 5' 4" length, 2 rail

568
16 Cedar split rail corner posts
13 2 rail posts, 3 3 rail posts

569
10 Cedar split rail pieces
roughly 9'6" length

570

571
Cedar Shadowbox fence sections x5
custom built, curved top all rough sawn cedar, 72" height by 85" length x5

572
Cedar Shadowbox fence sections x5
custom built, curved top all rough sawn cedar, 72" height by 85" length x5

573
Cedar boards x10
rough cut on one side, 3/4" x 8" x 8'

574
Cedar boards x9
3 - 5' 6", 3 -10', 2 -12', 1- 14', rough cut on one side, x9

575
Quantity of Cedar boards
1/2" x 6", 28 6', 23 6'10", 9 8' pieces, rough on one side

576
10 Cedar boards
2" x 4" x 8', rough sawn

577
Group of pressure treated boards
double grooved, 3/4" x 6", lengths vary from 48" -68", with ripped down strips

578
Group of pressure treated boards
double grooved, 3/4" x 6", lengths vary from 48" -57", with ripped down strips

579
lumber rack with contents
pipe rack, 50" x 57" x 84" height, miscellaneous pressured treated ripped pieces, 1 3/4" x 88", etc.

580
Miscellaneous Cedar lumber
3/4" x 1 1/2", ripped strips, etc.

581
Pressure treated lumber
ripped strips, 3/4" x 1 3/4", 1 12" width pieces, most 48" & 57" lengths

582
Large quantity pressure treated lumber
ripped strips, 3/4" x 2 1/4" width, 79" - 106" lengths

583
Miscellaneous pressured treated lumber
mostly strips, various lengths & widths

584
Pressured treated lumber
3/4" x 2 3/4" x 46"

585
Pressure treated deck lumber
5/4" x 6", 2-72", 2 82", 2" x 4" pieces

586
Pressured treated boards
3/4" x 6" x 53", approximately 52 pieces

587
Pressured treated boards
3/4" x 6" x 66", approximately 30 pieces

588
Large quantity pressure treated strips
various size widths & lengths

589
Pressure treated lumber
3/4" x 6", lengths vary from 19" - 53"

590
Cedar lumber scraps
rough sawn, 2 x 4 & 1/2" x 6" pieces, great hobbyist lumber




594
Large quantity of hardware
3 hardware bins, nails, screws, etc. NOT shelves!

595
DeWalt & Bostitch nails
angled finish nails & coil siding nails


597
Pair of roller stands
height adjustable, 9 1/2" width

598
Roll stand
height adjustable, 19 1/2"

599
Lumber stand
height adjustable, 27" width

600
6 wood clamps
4 c-clamps, 2 Jorgensen 3706



603
5 wood clamps
Quick-Grip, Bessey & Klik clamp



606
5 C-clamps
4 6" & 1 3"

607



610
3 wood clamps
2 Irwink & one unmarked

611
2 wood clamps / vise
Quickvise & 41" metal clamp

612
Mobile warehouse cart
Wood top, pipe construction, 3' x 5'

613
Hand tools
pliers, shears, etc.

614
Hand tools
Ace hardware socket set, allen wrenches, Kobalt tap & die set

615

616
S-K sockets & ratchets
1/2" & 3/4", some Matco sockets

617
Miscellaneous sockets & ratchets
various makers & sizes

618
Miscellaneous wrenches
various makers & sizes


620
Sockets, ratchets & wrenches
1/2" deep impact, 3/8" drive ratchets, predominately S-K


622
Miscellaneous sockets & ratchets
Jobsmart 19 piece 1/4" drive, Gear Wrench allen sockets, Torque sockets

623
Mechanic's tool chest
lift top, 4 drawers

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Dec 11
Rochester, NY



Sponsored Links

Wood Working Shop Contents & More

Reynolds Auction Co., Inc.

Reynolds Auction Co., Inc.


Contact: David Koeberle
Phone: 315-597-8815
Sale Location
616 State Route 104
Ontario, NY 14519
Sale Dates and Times
Sale Terms and Conditions
Bidding with the Reynolds Auction Company, you accept the following terms and condition of this Auction: - NO SHIPPING - PICK UP ONLY - You may check with Brickhouse Antiques at 315-597-3883 for shipping smalls - All bidders are required to register prior to bidding on any item. -Bids cannot be retracted or changed once the auction begins. - All sales are final. Everything is sold "AS IS" with no guarantee or warrantee of any type including warrantee of merchantability and the purchaser by bidding on said item accepts that item without any such warrantee or guarantee and in a "AS IS" condition. It is the responsibility of the bidder to assure condition of items prior to bidding. We recommend an inspection of the lots prior to bidding. All condition reports given by the Reynolds Auction Co. are subjective and we will not be held responsible or liable for any errors in description including age, size, measurements, condition, rarity, importance or provenance,etc. We strive to give true, accurate descriptions on items but realize reports are subjective and are for informational purposes only. - A BUYERS PREMIUM OF 15% will be added to ALL purchases. - Credit card is the only method of payment for this auction. No other forms of payment will be taken. - Payment is due in full within the time limits posted in the auction. For this auction, all payment will be made through the credit card you provided when you registered. We accept Visa and MasterCard only. - 15% buyer's premium and NYS SALES TAX added to all items purchased. This is a new system, YOUR tax information MUST be entered BEFORE the auction closes. NO refunds will be made. - By bidding with our auction company, you are entering into a contract with our terms and conditions. You are accepting responsibility to perform your duties as winning bidder, and agreeing that the Reynolds Auction Co., its employees, officers, owners, representatives, agents, and consignors will not be held liable for any losses, claims, liabilities, judgments, expenses, fees, or other damages arising from the use of our services, website, auction property, and this site, including property damage, injuries, dispute with another bidder, or breach by bidder of this site. -All successful bidders will sign their receipt at the time of pick up indicating that all items are accounted for and in satisfactory condition. There will be No returns, refunds or exchanges on any items as this is an auction and not a retail situation. -Reynolds Auction Co. will not be held responsible for any delays or interruption in internet service, errors, and/or omissions, caused by any means and does not guarantee continual, uninterrupted or error free service or use of the site. -Reynolds Auction Co. has the right to suspend bidding, re-sell any item/lots for any reason and void any sale. -All sales are subject to appropriate SALES TAX and buyer's premium. Buyer's premium is 15% of purchase price on every item and is subject to sales tax. If you are tax exempt, you MUST indicate this when you REGISTER and provide a recent copy of the form BEFORE THE AUCTION CLOSES or you will be charged sales tax. Once the auction concludes we cannot remove sales tax after the credit card has been processed. -Bids cannot be retracted or changed once the auction begins. - NO SHIPPING IS OFFERED FOR THIS AUCTION - PICK UP ONLY. -All items in this auction must be picked up in the scheduled time frame. Please take notice of pick up time! If you cannot make pick up time, please have someone come on your behalf. There are no other times for removal. If you leave your without making arranements for pick, after 14 days, the item becomes the property of Reynolds Auction Co. and will disposed or resold and no refunds will be issued. -Reynolds Auction Co. is NOT liable for any damage to property left on the auction premises after the auction and pickup timeframe has concluded. Reynolds Auction Co. is NOT liable for any damage to property transported or stored, past the auction day and pick up time. No refunds will be issued for any items damaged after the auction and pickup time frames have ended. - No refunds or returns on any items sold in this auction.
Listing Details
Wood Working Shop Contents, Motorcycles (parts) & More Auction Bidding Starts, May 11, 2021 and Bidding Ends, Wednesday, May 19, 2021 at 7:00 PM EST with soft close - extended bidding; You can find the auction at https://reynoldsauctioncompany.hibid.com Resale Tax information must be entered no later than 4:00 PM EST, on the day the auction closes, if you do not provide the correct forms, tax will be charged and once charged will NOT be refunded. The sooner we receive the information, the better - Thank you. Pickup ONLY, Friday, May 21, 2021 from 10:00 AM - 6:00 PM EST, 616 State Route 104, Ontario, NY 14519 - ON SITE AUCTION - NO OTHER PICK UP TIME if you can't make it - YOU MUST make arrangements for someone else to pickup your items. BUYER REMOVES & LOADS - bring your own help, but loader assistance available. You must follow COVID19 restrictions and wear a mask; Large Pickups by Appointment ONLY - call Dave 315-945-1212 to schedule appointment. Only one purchaser allowed into the property at a time, due to accessibility issues. Avoid long lines, set an appointment.

485
Delta 12" portable planer
mobile table base

486
Delta 6" Deluxe jointer
model 37-190, mobile base

487
SSC panel saw
model H-4, 2.5 hp power unit

488
DeWalt DW 744 10" table saw
with folding table

489
Delta model 20 vertical band saw
220 volt, Buyer removes come prepared with help, loader assistance available.

490
Delta Unisaw
10" attached plywood Porter-Cable 7518 router extension table, Unifence, Buyer removes come prepared with help, loader assistance available.

491
Delta Shaper
Platinum Edition with Delta power feed, 230 volt, single phase, mobile base, Buyer removes come prepared with help, loader assistance available.

492
Bridgewood 200P planer
19" width, 220 volt, Buyer removes come prepared with help, loader assistance available.

493
Bridgewood Shaper
model BW310, Delta Industrial power feed, 8-speed, 4 rollers, 230 volt, Buyer removes come prepared with help, loader assistance available.

494
Jet dust collector
model DC-1200, 115/230 volt, buyer can take metal duct from collector to other machines in the shop; Buyer removes come prepared with help.

495
Jet air filtration system
110 volt, Buyer removes come prepared with help.

496
The Original Radial arm saw
10" diameter, 220 volt, Buyer removes come prepared with help, it is mounted between 2 wooden work tables!

497
Ridgid 10" chop saw
model R41121 with homemade dust collection system

498

499
Craftsman bench top drill press
with metal mobile cart

500
Devilbiss Pro 4000 upright air compressor
6.5 hp, 80 gallon, 220 volt, Buyer removes come prepared with help.


502
Clark Pneumatic tire fork lift
gas engine, runs & drives, needs proper size battery & seems to have a short in the electrical system, but it runs & operates, 11' height capacity with pair of 6' fork extensions

503
Kubota B7100 4 wheel drive tractor
with loader, diesel engine, odometer reads 0304 hours, 3 speed manual transmission, 3 pt hitch, PTO, seat is torn, runs & operates

504
Woods RM400 finish mower
4', 3 pt hitch, PTO driven, surface rust

505
Landa hot water industrial pressure washer
model PHWS 4-2000, hour meter reads 0035, 220 volt, Platinum series, hot water function not working last time used.

506
Craftsman 6300 watt generator
electric start, 11 horse power Briggs & Stratton engine, runs

507
Oxyacetylene torch set
hoses, gauges, tanks, cart, rod

508
Miller Dialarc 250 AC/DC welder
leads, helmet, rod, 220 volt

509
Toro 1132 walk behind snowblower
Briggs & Stratton engine, electric start, 32" sawth

510




514
2 floor jacks
1 1/2 ton & MVP Superlift


516
Perception 16' composition kayak
paddle, with Yakima rooftop kayak mount

517
Porter Cable pancake air compressor
150 psi, glass cover over gauges is broken

518
2 kerosene heaters
upright & Knipco torpedo heater

519
Composition lawn cart
30" x 46", pneumatic

520
3 sections pallet racking
19' 6" length, 4' width, 8' height, BUYER REMOVES, come prepared with help.

521
3 sections pallet racking
24' length, 4' 8" width, 12' height, BUYER REMOVES, come prepared with help.

522
Work bench
3' x 6' with under-shelf



525
Yamaha TT-R 90 dirt bike
VIN JYACB03Y32A013567, turns over but did not start

526
1982 Honda CB900F motorcycle - NO PAPERWORK
VIN JH2SC0104CM103537, 43,567 registered miles, NO PAPERWORK - PARTS ONLY

527
1982 Honda CB900F motorcycle
VIN JH2SC0102CM104511, 14,448 registered miles, NO P APERWORK, PARTS ONLY

528
1985 Honda Gold Wing GL1200 motorcycle
VIN 1HFSC1442FA100791, with paperwork, PARTS ONLY

528
1998 BMW R1200 motorcycle
VIN: WB10434A3WZA62649, parts have been removed, but it appears that most are there, as is, with title

529
1985 Honda Gold Wing motorcycle & parts
GL1-4013680, fairing, side panels, seat, etc., NO PAPERWORK

530
Motorcycle parts
exhaust pipes, back rest, CB900F side panels

531
2 attic fans
24" & 34", 30" fan shutter

532
Rocky Mountain bicycle
full suspension

533
2 Mountain bikes
Trick single track, bent front rim, bad tires & GT bike, parts???



536
2 wheel hand truck
pneumatic tires

537
2 wheel hand truck
pneumatic tires

538
Shop vac
16 gallon, no hoses

539
2 walk behind mowers
Huskee 21" sleft propelled & Craftsman



542
Wheel barrow & garden tools
rakes, shovel, hoe, sprayer, etc.

543
Kristi 5' x 8' enclosed trailer
single axle, rear swing door, some damage to roof top with dents - NO PAPERWORK, storage trailer only

544
10 x 10 outdoor shed
T-111 exterior, asphalt shingles, needs floor, existing floor rotted, BUYER REMOVES - allowed ONE WEEK to move!

545
Antique Monroe County map
mounted on fiber board, 58" x 58"

546
Lesco walk behind mower
Kawasaki engine, 52" cut, not running

547
Pressure Treated Tongue & Groove fence x13
69" x 93 1/2", comes with top grid panel, 16" x 93 1/2", x13

548
Pressure Treated fence x3
tongue & grove, 52 1/2" x 93 1/2", all with top piece, x3

549

550
80 pressure treated decorative post caps
designed to fit 4"x4" posts

551
20 pressure treated decorative post caps
designed to fit 6"x6" posts

552
20 pressure treated decorative post caps
designed to fit 6"x6" posts

553
20 pressure treated decorative post caps
designed to fit 6"x6" posts

554
23 pressure treated decorative post caps
designed to fit 6"x6" posts

555
32 pressure treated decorative post caps
designed to fit 4"x4" posts

556
32 pressure treated decorative post caps
designed to fit 4"x4" posts

557
10 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

558
10 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

559
10 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

560
12 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

561
pressure treated boards x 47
3/4" x 6" x 12', square edges, Buyer removes & loads, come prepared with help, x47

562
pressure treated boards x 160
3/4" x 6" x 12', square edges, Buyer removes & loads, come prepared with help, x160

563
215 pieces pressured treated fence boards
5/4" x 6" x 6' dog eared top, new, Buyer removes & loads, come prepared with help

564
20 Cedar split rail corner post
roughly 6' 6" length, 3 rail

565
20 Cedar split rail corner post
roughly 6' 6" length, 3 rail

566
20 Cedar split rail corner post
roughly 6' 6" length, 3 rail

567
20 Cedar split rail corner post
roughly 5' 4" length, 2 rail

568
16 Cedar split rail corner posts
13 2 rail posts, 3 3 rail posts

569
10 Cedar split rail pieces
roughly 9'6" length

570

571
Cedar Shadowbox fence sections x5
custom built, curved top all rough sawn cedar, 72" height by 85" length x5

572
Cedar Shadowbox fence sections x5
custom built, curved top all rough sawn cedar, 72" height by 85" length x5

573
Cedar boards x10
rough cut on one side, 3/4" x 8" x 8'

574
Cedar boards x9
3 - 5' 6", 3 -10', 2 -12', 1- 14', rough cut on one side, x9

575
Quantity of Cedar boards
1/2" x 6", 28 6', 23 6'10", 9 8' pieces, rough on one side

576
10 Cedar boards
2" x 4" x 8', rough sawn

577
Group of pressure treated boards
double grooved, 3/4" x 6", lengths vary from 48" -68", with ripped down strips

578
Group of pressure treated boards
double grooved, 3/4" x 6", lengths vary from 48" -57", with ripped down strips

579
lumber rack with contents
pipe rack, 50" x 57" x 84" height, miscellaneous pressured treated ripped pieces, 1 3/4" x 88", etc.

580
Miscellaneous Cedar lumber
3/4" x 1 1/2", ripped strips, etc.

581
Pressure treated lumber
ripped strips, 3/4" x 1 3/4", 1 12" width pieces, most 48" & 57" lengths

582
Large quantity pressure treated lumber
ripped strips, 3/4" x 2 1/4" width, 79" - 106" lengths

583
Miscellaneous pressured treated lumber
mostly strips, various lengths & widths

584
Pressured treated lumber
3/4" x 2 3/4" x 46"

585
Pressure treated deck lumber
5/4" x 6", 2-72", 2 82", 2" x 4" pieces

586
Pressured treated boards
3/4" x 6" x 53", approximately 52 pieces

587
Pressured treated boards
3/4" x 6" x 66", approximately 30 pieces

588
Large quantity pressure treated strips
various size widths & lengths

589
Pressure treated lumber
3/4" x 6", lengths vary from 19" - 53"

590
Cedar lumber scraps
rough sawn, 2 x 4 & 1/2" x 6" pieces, great hobbyist lumber




594
Large quantity of hardware
3 hardware bins, nails, screws, etc. NOT shelves!

595
DeWalt & Bostitch nails
angled finish nails & coil siding nails


597
Pair of roller stands
height adjustable, 9 1/2" width

598
Roll stand
height adjustable, 19 1/2"

599
Lumber stand
height adjustable, 27" width

600
6 wood clamps
4 c-clamps, 2 Jorgensen 3706



603
5 wood clamps
Quick-Grip, Bessey & Klik clamp



606
5 C-clamps
4 6" & 1 3"

607



610
3 wood clamps
2 Irwink & one unmarked

611
2 wood clamps / vise
Quickvise & 41" metal clamp

612
Mobile warehouse cart
Wood top, pipe construction, 3' x 5'

613
Hand tools
pliers, shears, etc.

614
Hand tools
Ace hardware socket set, allen wrenches, Kobalt tap & die set

615

616
S-K sockets & ratchets
1/2" & 3/4", some Matco sockets

617
Miscellaneous sockets & ratchets
various makers & sizes

618
Miscellaneous wrenches
various makers & sizes


620
Sockets, ratchets & wrenches
1/2" deep impact, 3/8" drive ratchets, predominately S-K


622
Miscellaneous sockets & ratchets
Jobsmart 19 piece 1/4" drive, Gear Wrench allen sockets, Torque sockets

623
Mechanic's tool chest
lift top, 4 drawers

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Wood Working Shop Contents & More
 Online Only Auction
Auction Date(s)
Bidding Starts: Tuesday May 11
Bidding Ends: Wednesday May 19
Auction Location

Ontario, NY 14519
Company
Reynolds Auction Co., Inc.

Contact: David Koeberle
Phone: 315-597-8815
Website: www.reynoldsauction.com

Listing Terms and Conditions
Bidding with the Reynolds Auction Company, you accept the following terms and condition of this Auction: - NO SHIPPING - PICK UP ONLY - You may check with Brickhouse Antiques at 315-597-3883 for shipping smalls - All bidders are required to register prior to bidding on any item. -Bids cannot be retracted or changed once the auction begins. - All sales are final. Everything is sold "AS IS" with no guarantee or warrantee of any type including warrantee of merchantability and the purchaser by bidding on said item accepts that item without any such warrantee or guarantee and in a "AS IS" condition. It is the responsibility of the bidder to assure condition of items prior to bidding. We recommend an inspection of the lots prior to bidding. All condition reports given by the Reynolds Auction Co. are subjective and we will not be held responsible or liable for any errors in description including age, size, measurements, condition, rarity, importance or provenance,etc. We strive to give true, accurate descriptions on items but realize reports are subjective and are for informational purposes only. - A BUYERS PREMIUM OF 15% will be added to ALL purchases. - Credit card is the only method of payment for this auction. No other forms of payment will be taken. - Payment is due in full within the time limits posted in the auction. For this auction, all payment will be made through the credit card you provided when you registered. We accept Visa and MasterCard only. - 15% buyer's premium and NYS SALES TAX added to all items purchased. This is a new system, YOUR tax information MUST be entered BEFORE the auction closes. NO refunds will be made. - By bidding with our auction company, you are entering into a contract with our terms and conditions. You are accepting responsibility to perform your duties as winning bidder, and agreeing that the Reynolds Auction Co., its employees, officers, owners, representatives, agents, and consignors will not be held liable for any losses, claims, liabilities, judgments, expenses, fees, or other damages arising from the use of our services, website, auction property, and this site, including property damage, injuries, dispute with another bidder, or breach by bidder of this site. -All successful bidders will sign their receipt at the time of pick up indicating that all items are accounted for and in satisfactory condition. There will be No returns, refunds or exchanges on any items as this is an auction and not a retail situation. -Reynolds Auction Co. will not be held responsible for any delays or interruption in internet service, errors, and/or omissions, caused by any means and does not guarantee continual, uninterrupted or error free service or use of the site. -Reynolds Auction Co. has the right to suspend bidding, re-sell any item/lots for any reason and void any sale. -All sales are subject to appropriate SALES TAX and buyer's premium. Buyer's premium is 15% of purchase price on every item and is subject to sales tax. If you are tax exempt, you MUST indicate this when you REGISTER and provide a recent copy of the form BEFORE THE AUCTION CLOSES or you will be charged sales tax. Once the auction concludes we cannot remove sales tax after the credit card has been processed. -Bids cannot be retracted or changed once the auction begins. - NO SHIPPING IS OFFERED FOR THIS AUCTION - PICK UP ONLY. -All items in this auction must be picked up in the scheduled time frame. Please take notice of pick up time! If you cannot make pick up time, please have someone come on your behalf. There are no other times for removal. If you leave your without making arranements for pick, after 14 days, the item becomes the property of Reynolds Auction Co. and will disposed or resold and no refunds will be issued. -Reynolds Auction Co. is NOT liable for any damage to property left on the auction premises after the auction and pickup timeframe has concluded. Reynolds Auction Co. is NOT liable for any damage to property transported or stored, past the auction day and pick up time. No refunds will be issued for any items damaged after the auction and pickup time frames have ended. - No refunds or returns on any items sold in this auction.
Wood Working Shop Contents, Motorcycles (parts) & More Auction Bidding Starts, May 11, 2021 and Bidding Ends, Wednesday, May 19, 2021 at 7:00 PM EST with soft close - extended bidding; You can find the auction at https://reynoldsauctioncompany.hibid.com Resale Tax information must be entered no later than 4:00 PM EST, on the day the auction closes, if you do not provide the correct forms, tax will be charged and once charged will NOT be refunded. The sooner we receive the information, the better - Thank you. Pickup ONLY, Friday, May 21, 2021 from 10:00 AM - 6:00 PM EST, 616 State Route 104, Ontario, NY 14519 - ON SITE AUCTION - NO OTHER PICK UP TIME if you can't make it - YOU MUST make arrangements for someone else to pickup your items. BUYER REMOVES & LOADS - bring your own help, but loader assistance available. You must follow COVID19 restrictions and wear a mask; Large Pickups by Appointment ONLY - call Dave 315-945-1212 to schedule appointment. Only one purchaser allowed into the property at a time, due to accessibility issues. Avoid long lines, set an appointment.

485
Delta 12" portable planer
mobile table base

486
Delta 6" Deluxe jointer
model 37-190, mobile base

487
SSC panel saw
model H-4, 2.5 hp power unit

488
DeWalt DW 744 10" table saw
with folding table

489
Delta model 20 vertical band saw
220 volt, Buyer removes come prepared with help, loader assistance available.

490
Delta Unisaw
10" attached plywood Porter-Cable 7518 router extension table, Unifence, Buyer removes come prepared with help, loader assistance available.

491
Delta Shaper
Platinum Edition with Delta power feed, 230 volt, single phase, mobile base, Buyer removes come prepared with help, loader assistance available.

492
Bridgewood 200P planer
19" width, 220 volt, Buyer removes come prepared with help, loader assistance available.

493
Bridgewood Shaper
model BW310, Delta Industrial power feed, 8-speed, 4 rollers, 230 volt, Buyer removes come prepared with help, loader assistance available.

494
Jet dust collector
model DC-1200, 115/230 volt, buyer can take metal duct from collector to other machines in the shop; Buyer removes come prepared with help.

495
Jet air filtration system
110 volt, Buyer removes come prepared with help.

496
The Original Radial arm saw
10" diameter, 220 volt, Buyer removes come prepared with help, it is mounted between 2 wooden work tables!

497
Ridgid 10" chop saw
model R41121 with homemade dust collection system

498

499
Craftsman bench top drill press
with metal mobile cart

500
Devilbiss Pro 4000 upright air compressor
6.5 hp, 80 gallon, 220 volt, Buyer removes come prepared with help.

501

502
Clark Pneumatic tire fork lift
gas engine, runs & drives, needs proper size battery & seems to have a short in the electrical system, but it runs & operates, 11' height capacity with pair of 6' fork extensions

503
Kubota B7100 4 wheel drive tractor
with loader, diesel engine, odometer reads 0304 hours, 3 speed manual transmission, 3 pt hitch, PTO, seat is torn, runs & operates

504
Woods RM400 finish mower
4', 3 pt hitch, PTO driven, surface rust

505
Landa hot water industrial pressure washer
model PHWS 4-2000, hour meter reads 0035, 220 volt, Platinum series, hot water function not working last time used.

506
Craftsman 6300 watt generator
electric start, 11 horse power Briggs & Stratton engine, runs

507
Oxyacetylene torch set
hoses, gauges, tanks, cart, rod

508
Miller Dialarc 250 AC/DC welder
leads, helmet, rod, 220 volt

509
Toro 1132 walk behind snowblower
Briggs & Stratton engine, electric start, 32" sawth

510

511

512

513

514
2 floor jacks
1 1/2 ton & MVP Superlift

515

516
Perception 16' composition kayak
paddle, with Yakima rooftop kayak mount

517
Porter Cable pancake air compressor
150 psi, glass cover over gauges is broken

518
2 kerosene heaters
upright & Knipco torpedo heater

519
Composition lawn cart
30" x 46", pneumatic

520
3 sections pallet racking
19' 6" length, 4' width, 8' height, BUYER REMOVES, come prepared with help.

521
3 sections pallet racking
24' length, 4' 8" width, 12' height, BUYER REMOVES, come prepared with help.

522
Work bench
3' x 6' with under-shelf

523

524

525
Yamaha TT-R 90 dirt bike
VIN JYACB03Y32A013567, turns over but did not start

526
1982 Honda CB900F motorcycle - NO PAPERWORK
VIN JH2SC0104CM103537, 43,567 registered miles, NO PAPERWORK - PARTS ONLY

527
1982 Honda CB900F motorcycle
VIN JH2SC0102CM104511, 14,448 registered miles, NO P APERWORK, PARTS ONLY

528
1985 Honda Gold Wing GL1200 motorcycle
VIN 1HFSC1442FA100791, with paperwork, PARTS ONLY

528
1998 BMW R1200 motorcycle
VIN: WB10434A3WZA62649, parts have been removed, but it appears that most are there, as is, with title

529
1985 Honda Gold Wing motorcycle & parts
GL1-4013680, fairing, side panels, seat, etc., NO PAPERWORK

530
Motorcycle parts
exhaust pipes, back rest, CB900F side panels

531
2 attic fans
24" & 34", 30" fan shutter

532
Rocky Mountain bicycle
full suspension

533
2 Mountain bikes
Trick single track, bent front rim, bad tires & GT bike, parts???

534

535

536
2 wheel hand truck
pneumatic tires

537
2 wheel hand truck
pneumatic tires

538
Shop vac
16 gallon, no hoses

539
2 walk behind mowers
Huskee 21" sleft propelled & Craftsman

540

541

542
Wheel barrow & garden tools
rakes, shovel, hoe, sprayer, etc.

543
Kristi 5' x 8' enclosed trailer
single axle, rear swing door, some damage to roof top with dents - NO PAPERWORK, storage trailer only

544
10 x 10 outdoor shed
T-111 exterior, asphalt shingles, needs floor, existing floor rotted, BUYER REMOVES - allowed ONE WEEK to move!

545
Antique Monroe County map
mounted on fiber board, 58" x 58"

546
Lesco walk behind mower
Kawasaki engine, 52" cut, not running

547
Pressure Treated Tongue & Groove fence x13
69" x 93 1/2", comes with top grid panel, 16" x 93 1/2", x13

548
Pressure Treated fence x3
tongue & grove, 52 1/2" x 93 1/2", all with top piece, x3

549

550
80 pressure treated decorative post caps
designed to fit 4"x4" posts

551
20 pressure treated decorative post caps
designed to fit 6"x6" posts

552
20 pressure treated decorative post caps
designed to fit 6"x6" posts

553
20 pressure treated decorative post caps
designed to fit 6"x6" posts

554
23 pressure treated decorative post caps
designed to fit 6"x6" posts

555
32 pressure treated decorative post caps
designed to fit 4"x4" posts

556
32 pressure treated decorative post caps
designed to fit 4"x4" posts

557
10 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

558
10 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

559
10 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

560
12 pieces pressure treated fence top
gridwork, was used on top of fence sections, 16" x 93 1/2"

561
pressure treated boards x 47
3/4" x 6" x 12', square edges, Buyer removes & loads, come prepared with help, x47

562
pressure treated boards x 160
3/4" x 6" x 12', square edges, Buyer removes & loads, come prepared with help, x160

563
215 pieces pressured treated fence boards
5/4" x 6" x 6' dog eared top, new, Buyer removes & loads, come prepared with help

564
20 Cedar split rail corner post
roughly 6' 6" length, 3 rail

565
20 Cedar split rail corner post
roughly 6' 6" length, 3 rail

566
20 Cedar split rail corner post
roughly 6' 6" length, 3 rail

567
20 Cedar split rail corner post
roughly 5' 4" length, 2 rail

568
16 Cedar split rail corner posts
13 2 rail posts, 3 3 rail posts

569
10 Cedar split rail pieces
roughly 9'6" length

570

571
Cedar Shadowbox fence sections x5
custom built, curved top all rough sawn cedar, 72" height by 85" length x5

572
Cedar Shadowbox fence sections x5
custom built, curved top all rough sawn cedar, 72" height by 85" length x5

573
Cedar boards x10
rough cut on one side, 3/4" x 8" x 8'

574
Cedar boards x9
3 - 5' 6", 3 -10', 2 -12', 1- 14', rough cut on one side, x9

575
Quantity of Cedar boards
1/2" x 6", 28 6', 23 6'10", 9 8' pieces, rough on one side

576
10 Cedar boards
2" x 4" x 8', rough sawn

577
Group of pressure treated boards
double grooved, 3/4" x 6", lengths vary from 48" -68", with ripped down strips

578
Group of pressure treated boards
double grooved, 3/4" x 6", lengths vary from 48" -57", with ripped down strips

579
lumber rack with contents
pipe rack, 50" x 57" x 84" height, miscellaneous pressured treated ripped pieces, 1 3/4" x 88", etc.

580
Miscellaneous Cedar lumber
3/4" x 1 1/2", ripped strips, etc.

581
Pressure treated lumber
ripped strips, 3/4" x 1 3/4", 1 12" width pieces, most 48" & 57" lengths

582
Large quantity pressure treated lumber
ripped strips, 3/4" x 2 1/4" width, 79" - 106" lengths

583
Miscellaneous pressured treated lumber
mostly strips, various lengths & widths

584
Pressured treated lumber
3/4" x 2 3/4" x 46"

585
Pressure treated deck lumber
5/4" x 6", 2-72", 2 82", 2" x 4" pieces

586
Pressured treated boards
3/4" x 6" x 53", approximately 52 pieces

587
Pressured treated boards
3/4" x 6" x 66", approximately 30 pieces

588
Large quantity pressure treated strips
various size widths & lengths

589
Pressure treated lumber
3/4" x 6", lengths vary from 19" - 53"

590
Cedar lumber scraps
rough sawn, 2 x 4 & 1/2" x 6" pieces, great hobbyist lumber

591

592

593

594
Large quantity of hardware
3 hardware bins, nails, screws, etc. NOT shelves!

595
DeWalt & Bostitch nails
angled finish nails & coil siding nails

596

597
Pair of roller stands
height adjustable, 9 1/2" width

598
Roll stand
height adjustable, 19 1/2"

599
Lumber stand
height adjustable, 27" width

600
6 wood clamps
4 c-clamps, 2 Jorgensen 3706

601

602

603
5 wood clamps
Quick-Grip, Bessey & Klik clamp

604

605

606
5 C-clamps
4 6" & 1 3"

607

608

609

610
3 wood clamps
2 Irwink & one unmarked

611
2 wood clamps / vise
Quickvise & 41" metal clamp

612
Mobile warehouse cart
Wood top, pipe construction, 3' x 5'

613
Hand tools
pliers, shears, etc.

614
Hand tools
Ace hardware socket set, allen wrenches, Kobalt tap & die set

615

616
S-K sockets & ratchets
1/2" & 3/4", some Matco sockets

617
Miscellaneous sockets & ratchets
various makers & sizes

618
Miscellaneous wrenches
various makers & sizes

619

620
Sockets, ratchets & wrenches
1/2" deep impact, 3/8" drive ratchets, predominately S-K

621

622
Miscellaneous sockets & ratchets
Jobsmart 19 piece 1/4" drive, Gear Wrench allen sockets, Torque sockets

623
Mechanic's tool chest
lift top, 4 drawers