Meridian Public Schools Surplus Auction Plus More
Previous Page Listing ID#: 116042

Auction Location

auburn, MI 48611
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Friday Feb 15
Bidding Ends: Sunday Feb 24
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
J Marsh Auctions and Estate Sales

Contact: Jason Marsh
Phone: 989-615-2170
Email: jmarsh357@gmail.com
Website: www.jmarshauctionsandestatesales.com

GoToAuction.com ID#: 3243
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Auction Terms & Conditions By registering and bidding on any item, the bidder/buyer shows acceptance of the following terms and conditions. Do not register or bid unless you agree to all of the terms and conditions: REGISTRATION: All information provided by bidder/buyer during the registration process must be current, complete, and accurate. Bidders must be 18 years of age or older. J Marsh Auctions at its sole discretion, may deny registration to any person or entity. DISCLAIMER: All lots are sold "AS-IS, WHERE-IS", with all faults, imperfections and errors. J Marsh Auctions and the seller(s) do not give or make any type of guarantee or warranty regarding the lots to be sold, implied or otherwise. J Marsh Auctions encourages all bidders to inspect lots in person before bidding. J Marsh Auctions has put forth every effort in preparing the catalog for every auction to provide accurate descriptions of all items, however, it is the bidder's responsibility to determine the condition and suitability of each lot. Due diligence is the responsibility of the bidder/buyer. Printed statements or descriptions by staff are provided in good faith and are matters of opinion. Any bidder's failure to inspect, or to be fully informed on the quality or condition will not constitute grounds for any claim, adjustment, refund, termination of the purchase contract, or refusal to close the sale. If you are unsure about any of the Term and Conditions, pricing, or how to bid; IF YOU ARE IN ANY WAY UNSURE AS TO ANY MATTER HEREIN, J Marsh Auctions URGES YOU TO NOT BID. CONDUCT OF THE AUCTION: Conduct of the auction and increments of bidding are at the direction and discretion of J Marsh Auctions. J Marsh Auctions reserves the right to reject any and all bids for any reason and also reserves the right to cancel this auction, or remove any item or lot from this auction prior to the close of bidding. WE ACT ONLY AS AGENTS FOR THE SELLER. Sellers or their agents reserve the right to bid on their own behalf to protect their investment(s). All decisions of J Marsh Auctions are final. MAX BID: When you place your maximum bid, the current bid price doesn't automatically jump to your max bid. Your bid will go to the next highest increment and will be increase as other people bid against you. The computer will automatically bid up to your max in the increments specified. By placing any bids you have agreed by legal contract that your bid or max bid is what you are willing to pay for that specific lot(s) and may have to pay full bid or max bid amount of any bids placed. The buyer agrees and is responsible for every bid amount placed. Remember, J Marsh Auctions or anybody for that matter DO NOT force you to place any bid, you and you alone are responsible for your actions. Please bid accordingly. . BUYER'S PREMIUM AND SALES TAX: Unless a specific auction states otherwise, a 10% buyer's premium will be charged on all items and lots. Every bidder/buyer pays the same buyer's premium and should bid accordingly. For example, if you bid $100 on an item at the auction you will be charged $110 for the item on your auction invoice. Please take this into consideration when bidding. 6% MI Sales Tax applies. (Coins & Currency are Sales Tax Exempt) (Farm Use and Sales Tax Exempt will need to fill out an Exemption Form). AUCTION ENDING: Beginning at the stated closing time, the auction software will conclude bidding for one lot every few seconds in catalog order with the following exception: if a bid is placed in the last two (2) minutes remaining for that auction lot, bidding for that lot will automatically extend the auction for additional two (2) minutes. Some lots may be grouped together so that a bid on one lot will extend the time on all lots in that group. An e-mail of invoice will be sent to the winning bidder/buyer of each auction after auction has completely closed. PAYMENT: All buyers must pay for their purchases in full within the scheduled removal dates after auction ending. : Cash, Checks, Money Orders, Cashiers Checks or Credit Card. J Marsh Auctions WILL NOT ACCEPT ANY CREDIT CARD PURCHASES OVER $1,000.00. ALL PURCHASES OVER $1,000.00 MUST BE WITH CASH, MONEY ORDER or CASHIERS CHECK. UNLESS PRE APPROVED. Merchandise becomes the full responsibility of the bidder/buyer at time of payment and the bidder/buyer assumes all risk of loss and damage to property at that time. Please check the details before placing your bid. ITEM PICK UP & REMOVAL: All successful bids must be picked up within scheduled removal dates of that specific auction unless other arrangements have been made. No items can be removed until, J Marsh Auctions has received and acknowledged payment in full. Any items not picked up by scheduled removal dates (for that specific auction), there will be a $3 per day storage fee starting after removal dates. J Marsh Auctions will hold purchases for 14 business days. After the 14 business days have expired you will forfeit all items of ownership back to J Marsh Auctions. J Marsh Auctions reserves the right to resell any property not paid for in full by the conclusion of the stated removal period. Buyers are responsible for rigging, loading, and removal of all items purchased without assistance from J Marsh Auctions. SUSPENSION / PERMANENT BAN: A bidder/buyer will be suspended or permanently banned from J Marsh Auctions Online Auctions for providing false or fraudulent information when registering. A bidder/buyer will be permanently banned from J Marsh Auctions Online Auctions for failing to honor the "REMOVAL" terms made under that bidder/buyer registration. TECHNICAL ISSUES: In the event there are technical difficulties related to the server, software, internet or any other online auction-related technologies, J Marsh Auctions reserve the right to extend bidding, continue the bidding, or close the bidding. Neither the company providing the software, nor J Marsh Auctions shall be held responsible for a missed bid or the failure of the software to function properly for any reason. BEFORE THE AUCTION: You may attend pre-sale viewing for all of our auctions. All property to be auctioned will have a designated preview time and place. You are encouraged to examine lots thoroughly. IMPORTANT NOTE: Your bid is a legally binding contract, no exceptions. Winning bidder agrees to indemnify and hold harmless sellers, auctioneers, auctioneers employees, auction company owners, directors, etc. etc. from all claims, fees, judgments, expenses, disputes, legal fees etc. etc. If you fail to pick up your items on the load out day and don't contact us we will bill your credit card used upon registration for this auction. Please contact us for any additional questions. J Marsh Auctions and Estate Sales Call or Text (989) 615-2170
Listing Information
Items 1 - 66 are Meridian Public Schools Surplus. Proceeds will go to the Meridian Schools General Fund. All of their items were in good, working condition unless noted. Great way to support the schools and get some nice stuff! Items 67 and on are other consignments. Thank you for bidding!

1
HIOKI 3127 Clamp On HI Tester
Hioki Model #3127 Clamp On HI Tester. Small piece of red plastic is broke but doesn't effect anything. In Case with manual. Very Nice Condition.

2
Remington Powder Actuated Tool #476
Remigton Powder Actuated Tool. Model #476 Looks to be in good condition.

3
Craftsman Molding Head Cutter Set W/ 11 Blades
Craftsman #9 3214 Molding Head Cutter Set 11 Blades included

4
Torch Set
Torch Set with 4 Heads, 2 Extra Tips, about a half bottle of gas. In Metal Case.

5
Skilsaw 7 1/4" Circular Saw
Skilsaw 7 1/4" Circular Saw #5150 Tested and Works

6
Craftsman 3/8 Drill
Craftsman 3/8 Drill Variable Speed Reversible Tested and Works

7
Porter Cable Drywall Driver
Porter Cable Drywall Driver #6645 Reversible Tested and Works

8
Skill 1/2" Drill #425
Skill 1/2" Drill #425 Tested and Works

9
Dewalt Palm Sander
Dewalt Random Orbit Palm Sander #DW421 Tested and Works

10
Milwaukee Hole Hawg Drill
Milwaukee Hole Hawg HD Variable Speed 2 Handles Tested and Works

11
Milwaukee Right Angle 1/2" Drill
Milwaukee Right Angle 1/2" Drill These are nice to have! Tested and works

12
Milwaukee Sawzall
Milwaukee HD Sawzall USA Made 4 amp Tested and Works

13
Milwaukee Sawzall
Milwaukee HD Sawzall 4 Amp Lots of Blades In original Metal Case Tested and Works

14
Rigid #2A Pipe Cutter
Rigid Pipe Cutter #2A 1/8" - 2"

15
Campbell Hausfield 2 Gal Air Compressor
Campbell Hausfield Air Compressor 2 Gallon 100 Max psi Tested and works

16
Schauer Battery Charger
Schauer Battery Charger # cr612 10 amp 6 or 12 volt Charger Works

17
ShopVac Hang Up
Wet/Dry 2.5 gallons 2.5 hp works

18
Delta 5" Bench Grinder
Delta 5" Bench Grinder #23-580 Works and looks Nice!

19
Lester 24 volt Battery Charger
Lester 24 volt Dual Mode Automatic Battery Charger Comes on. Not way to test. Said to be working.

20
Lestronic II 36 Volt Battery Charger
Lestronic II 36 volt Battery Charger Will charge three 12 volt batteries Comes on. No way to test. Said to be working.

21
Solo Backpack Sprayer
Solo Back Pack Sprayer 4 Gallon No wand Looks to be in very nice condition.

22
Rigid #65-R Pipe Threader
Rigid Pipe Threader #65-R 1" - 2" 24" Handle

23
Rigid #206 Soil Pipe Cutter
Rigid #206 Soil Pipe Cutter USA Made Very nice condition Over $500 new!

24
Rigid 00-R Exposed Ratchet Threader Set
Rigid 00-R Exposed Ratchet Threader Set 1/8" - 1" 18" Handle

25
Tornado HEPA Filtration System
Tornado Hepa Filtration System Stainless Steel Tank 4 Stage Hepa Filtration System Rolls nice and easy Great condition Tested and Works

26
Dewalt 18 volt Drill Set (no batteries)
Dewalt 18 volt set Drill, Light, Circular Saw, 2 chargers Chargers are 7.2 volt - 18 volt Said to work but no batteries

27
Redline 640 PC Concrete Saw
Red Line 640 PC Concrete Saw 12" blade Belt Drive Made in Italy I didn't start it myself but said to run good.

28
Brute Double Buckets (4)
Lot of 4 Brute Rubbermaid Double Buckets 8 qt. Model #2617

29
Brute Double Buckets (3)
Lot of 3 Brute Rubbermaid Double Buckets 8 qt. Model #2617

30
Lot of 5 Hand Saws
2 Disston 2 Stanley 1 Unknown

31
Lot of 4 Miter Saws
Lot of 4 Miter Saws Superior 23 1/2" blade 2 - 16" blades 1 - 14" blade

32
Bow Saw Keyhole Saw and Tree Trim Blade
Bow Saw Key Hole Saw Tree Trim Blade

33
Combo Metric Wrench Sets (2) Misc. Wrenches (6)
(2) Sets of Combo Metric Wrench Sets (6) Misc. Wrenches

34
Berylco Brass Wrench
Collectible Berylco Brass Wrench 7/16" and 1/2" 12pt. W990

35
(3) 24" Levels
Stanley 100 plus (missing glass windows) Stanley 42-224 Master Mechanic

36
Johnson Wood Level No. 548
Nice Wood, Johnson #548 Level

37
Misc. Tool Lot
Misc. Tool Lot Lufkin Ruler Jim Dandy Hammer etc.

38
Lot of (3) Electric Drills
(3) Electric Drills Skil 3/8" B & D 1/4" Power House 1/4" All three work.

39
Lot of (10) Hand Tools Pliers etc.
(3) Eklind 3/16" (1) Vicegrips Channellock Cutters 4 pliers

40
Knipex Cobra 12" Water Pump Pliers
Knipex Cobra 12" Water Pump Pliers Self Adjusting #8701300 Made in Germany Very Nice Condition! A Must have in the toolbox!

41
Stanley USA Plane
Stanley USA C559 14" Plane Wood Handles

42
Caulk Guns (3) and Drywall Lift
Lot of (3) Caulk Guns Metal Drywall lift

43
Squares (2) plus lot of Concrete/Mud Tools
(2) Metal Squares Lot of Concrete/ Mason/ Mud Tools

44
Lot of (24) Tools
Screwdrivers Nut Drivers Plus Misc.

45
Reznor Infra-Rez Heater #TR125
Reznor Infra-Rez Heater #TR25 Natural Gas (4) 10 ft. each Heat Tubes (4) Reflective Shields for overtop of heat tubes Chimney All hardware Heater was in the School Woodshop and not used much. Very good condition!

46
Redmax G23L
Redmax G23L 5' Shaft Circular Saw Blade Said to run. I didn't start it myself.

47
Poulan Pro 31cc
Poulan Pro 31cc Has weed wacker attachment also chainsaw/ tree trim attachment Said to run. I didn't start it myself.

48
Lot of (2) Gas Weed Whackers
Bolens BL150 17" Missing Primer ball. Does roll over and has compression Poulon Pro III Doesn't engage when you pull the rope.

49
Black and Decker Electric Hedge Trimmer
B&D Electric Hedge Trimmer 22" Auto Stop

50
Black and Decker Electric Hedge Trimmer
B&D Electric Hedge Trimmer 18"

51
Jackson Wheel Barrow
Jackson Wheel Barrow Thick Steel Heavy Duty Good Solid Wheel Barrow

52
Jackson Wheel Barrow
Jackson Wheel Barrow Thick Steel Left handle is a little chewed up. Tube in tire holds air but the tire has a hole in it and could use replaced. Good, Heavy duty wheel barrow

53
Utilitub Sink
Utilitub 22.5" w x 24.5" deep x 15" H 21.5" Metal legs

54
Agri Fab Tilt Bed Trailer
Agri-Fab Tilt Bed USA Made 5' Long x 3' Wide x 14" sidwalls Nice, atv type tires Very nice condition!

55
UpRight Aluminum Scaffold by Aerial Specialists
UpRight Scaffold by Aerial Specialists Everything is Aluminum Highest USA Made Quality (12) 8' Horizontal and Diagnal Braces (6) Outriggers 10) Guardrail and Extension Frames (3) Platforms (1) Folding Base with wheels (11) Castor Wheels All of this...

56
Air Compressor Speedaire 60 Gallon
Speedaire 60 Gallon Air Compressor Model # 4B221 Cast Iron Series Made in USA 240 Volt 1 Phase High Quaility air compressor that works and looks great!

57
Lot of (6) Tables w/Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

58
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

59
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

60
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

61
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

62
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

63
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

64
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

65
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

66
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

67
Craftsman Double Stack Tool Box
Craftsman Tool Top section is 10 Drawers plus Top opens Bottom has 3 Drawers plus bottom cabinet. Top does not have key. Bottom cabinet locks and has key Total 50" Tall x 27" wide x 18" deep In good condition.

68
Elston Roll on Cargo Heater
Elston Catalytic roll on Cargo Heater Holds one 20 lb. Propane Tank 18,000 btu On wheels to roll around. 76" tall x 17" wide x 17" deep

69
Graco Magnum Texfinish
Graco Magnum Texfinish TX90 Series J09A 289 Hours 2 Spray guns Everything looks good Was told it works good I plugged it in and it came on.

70
Porcelain Gas Station Light
Porcelain Gas Station Light Made by Benjamin USA 16" w x 18" H Original hardware and in great condition!

71
Porcelain Gas Station Light
Porcelain Gas Station Light Made by Benjamin USA 16" w x 18" H Original hardware One chip on to side otherwise in great condition!

72
Porcelain Gas Station LIght
Porcelain Gas Station Light Made by Benjamin USA 16" w x 18" H Original hardware and in great condition!

73
Stainless Steel Heater
Stainless Steel Heater Heat with coal or wood. Neat, small heater. 13" H x 8 1/2" W 2" chimney

74
Stanley #135
Stanley #135 Liberty Bell 10" long x 2.5" wide There is a crack on back handle

75
Stanley # 22 Smooth Plane
Stanley #22 Smooth Plane

76
Stanley #26 Jack Plane
Stanley #26 Jack Plane 15" Long x 2" cutter width Nice!

77
Stanley #12 Veneer Scraper
Stanley #12 Veneer Scraper

78
Stanley #192 Rabbet Shave
Stanley #192 Rabbet Shave Nice condition.

79
Rabbet Shave USA
Rabbet Shave Only says USA on it Nice

80
Anvil
Small Anvil base is 5" x 3.5" Top is 9.5" end to end

81
Old Log Auger
ES & W Log Auger 18" Handle 18" bit Very Nice

82
Old Meat Cleaver
One side of wood handle is missing 9" blade

83
Bellota Machete
Bellota Machete 28" Long Marca Registrada High quality Knifes

84
Remington Knife
Remington RH36 USA Made 6 1/4"

85
Coleman Powermate Nailer/ Stapler
Coleman Powermate Air Nailer/ Stapler Looks like new!

86
Rotozip
Rotozip Spiral Saw SCS01 Looks to be in good condition I plugged it in and it ran and sounded good.

87
Louden A23 Pulley
Louden A23 Pulley Wood Pulley, Metal frame 6" diameter Pulley rolls

88
1/2" Socket Set
1/2" Socket Set Do-It-Best CR-V 1/2" - 15/16"

89
Little Giant Adjustable Die Set
Little Giant Adjustable Die Set NO. 310 Looks like a couple missing pieces Wood case is in good condition too.

90
Metal Cabinet
Metal Cabinet 5' High Made by Interstate Metal Products Good and Solid

91
Metal Cabinet
Metal Cabinet 65 1/4" High Good and Solid

92
Neat Metal Desk
All Metal Desk By Penco USA 34" wide 30" Deep Adjustable Height

93
46" Snow Plow Blade
Looks like it came off a tractor? Blade is solid and in good condition.

94
4 Drawer File Cabinet
Steelmaster 4 Drawer File Cabinet 15" wide Couple handles are loose but cabinet is good condition.

95
4 Drawer File Cabinet
Hirxh 4 Drawer File Cabinet 18" wide Has lock but no key Good, solid condition.

96
Torch Cart
Torch Cart Fits 2 Tanks Great condition!

97
2 Bench Grinders on Stand
2 Bench Grinders Dunlap 1/3 Horsepower Craftsman 1/2 Horsepower Mounted on Cast Iron Stand Looks to be a Heavy Duty Truck Rear End Both Grinders are tested and both work great Grind with a friend!

98
Coleman Powermate Generator
Coleman Powermate 54 Series Briggs and Stratton 8 HP 4000 Watts Runs good and works.

Photo Gallery

No photos have been uploaded for this sale.
Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Meridian Public Schools Surplus Auction Plus More

J Marsh Auctions and Estate Sales

J Marsh Auctions and Estate Sales


Contact: Jason Marsh
Phone: 989-615-2170
Sale Location
1997 W. Midland Rd.
auburn, MI 48611
Sale Dates and Times
Sale Terms and Conditions
Auction Terms & Conditions By registering and bidding on any item, the bidder/buyer shows acceptance of the following terms and conditions. Do not register or bid unless you agree to all of the terms and conditions: REGISTRATION: All information provided by bidder/buyer during the registration process must be current, complete, and accurate. Bidders must be 18 years of age or older. J Marsh Auctions at its sole discretion, may deny registration to any person or entity. DISCLAIMER: All lots are sold "AS-IS, WHERE-IS", with all faults, imperfections and errors. J Marsh Auctions and the seller(s) do not give or make any type of guarantee or warranty regarding the lots to be sold, implied or otherwise. J Marsh Auctions encourages all bidders to inspect lots in person before bidding. J Marsh Auctions has put forth every effort in preparing the catalog for every auction to provide accurate descriptions of all items, however, it is the bidder's responsibility to determine the condition and suitability of each lot. Due diligence is the responsibility of the bidder/buyer. Printed statements or descriptions by staff are provided in good faith and are matters of opinion. Any bidder's failure to inspect, or to be fully informed on the quality or condition will not constitute grounds for any claim, adjustment, refund, termination of the purchase contract, or refusal to close the sale. If you are unsure about any of the Term and Conditions, pricing, or how to bid; IF YOU ARE IN ANY WAY UNSURE AS TO ANY MATTER HEREIN, J Marsh Auctions URGES YOU TO NOT BID. CONDUCT OF THE AUCTION: Conduct of the auction and increments of bidding are at the direction and discretion of J Marsh Auctions. J Marsh Auctions reserves the right to reject any and all bids for any reason and also reserves the right to cancel this auction, or remove any item or lot from this auction prior to the close of bidding. WE ACT ONLY AS AGENTS FOR THE SELLER. Sellers or their agents reserve the right to bid on their own behalf to protect their investment(s). All decisions of J Marsh Auctions are final. MAX BID: When you place your maximum bid, the current bid price doesn't automatically jump to your max bid. Your bid will go to the next highest increment and will be increase as other people bid against you. The computer will automatically bid up to your max in the increments specified. By placing any bids you have agreed by legal contract that your bid or max bid is what you are willing to pay for that specific lot(s) and may have to pay full bid or max bid amount of any bids placed. The buyer agrees and is responsible for every bid amount placed. Remember, J Marsh Auctions or anybody for that matter DO NOT force you to place any bid, you and you alone are responsible for your actions. Please bid accordingly. . BUYER'S PREMIUM AND SALES TAX: Unless a specific auction states otherwise, a 10% buyer's premium will be charged on all items and lots. Every bidder/buyer pays the same buyer's premium and should bid accordingly. For example, if you bid $100 on an item at the auction you will be charged $110 for the item on your auction invoice. Please take this into consideration when bidding. 6% MI Sales Tax applies. (Coins & Currency are Sales Tax Exempt) (Farm Use and Sales Tax Exempt will need to fill out an Exemption Form). AUCTION ENDING: Beginning at the stated closing time, the auction software will conclude bidding for one lot every few seconds in catalog order with the following exception: if a bid is placed in the last two (2) minutes remaining for that auction lot, bidding for that lot will automatically extend the auction for additional two (2) minutes. Some lots may be grouped together so that a bid on one lot will extend the time on all lots in that group. An e-mail of invoice will be sent to the winning bidder/buyer of each auction after auction has completely closed. PAYMENT: All buyers must pay for their purchases in full within the scheduled removal dates after auction ending. : Cash, Checks, Money Orders, Cashiers Checks or Credit Card. J Marsh Auctions WILL NOT ACCEPT ANY CREDIT CARD PURCHASES OVER $1,000.00. ALL PURCHASES OVER $1,000.00 MUST BE WITH CASH, MONEY ORDER or CASHIERS CHECK. UNLESS PRE APPROVED. Merchandise becomes the full responsibility of the bidder/buyer at time of payment and the bidder/buyer assumes all risk of loss and damage to property at that time. Please check the details before placing your bid. ITEM PICK UP & REMOVAL: All successful bids must be picked up within scheduled removal dates of that specific auction unless other arrangements have been made. No items can be removed until, J Marsh Auctions has received and acknowledged payment in full. Any items not picked up by scheduled removal dates (for that specific auction), there will be a $3 per day storage fee starting after removal dates. J Marsh Auctions will hold purchases for 14 business days. After the 14 business days have expired you will forfeit all items of ownership back to J Marsh Auctions. J Marsh Auctions reserves the right to resell any property not paid for in full by the conclusion of the stated removal period. Buyers are responsible for rigging, loading, and removal of all items purchased without assistance from J Marsh Auctions. SUSPENSION / PERMANENT BAN: A bidder/buyer will be suspended or permanently banned from J Marsh Auctions Online Auctions for providing false or fraudulent information when registering. A bidder/buyer will be permanently banned from J Marsh Auctions Online Auctions for failing to honor the "REMOVAL" terms made under that bidder/buyer registration. TECHNICAL ISSUES: In the event there are technical difficulties related to the server, software, internet or any other online auction-related technologies, J Marsh Auctions reserve the right to extend bidding, continue the bidding, or close the bidding. Neither the company providing the software, nor J Marsh Auctions shall be held responsible for a missed bid or the failure of the software to function properly for any reason. BEFORE THE AUCTION: You may attend pre-sale viewing for all of our auctions. All property to be auctioned will have a designated preview time and place. You are encouraged to examine lots thoroughly. IMPORTANT NOTE: Your bid is a legally binding contract, no exceptions. Winning bidder agrees to indemnify and hold harmless sellers, auctioneers, auctioneers employees, auction company owners, directors, etc. etc. from all claims, fees, judgments, expenses, disputes, legal fees etc. etc. If you fail to pick up your items on the load out day and don't contact us we will bill your credit card used upon registration for this auction. Please contact us for any additional questions. J Marsh Auctions and Estate Sales Call or Text (989) 615-2170
Listing Details
Items 1 - 66 are Meridian Public Schools Surplus. Proceeds will go to the Meridian Schools General Fund. All of their items were in good, working condition unless noted. Great way to support the schools and get some nice stuff! Items 67 and on are other consignments. Thank you for bidding!

1
HIOKI 3127 Clamp On HI Tester
Hioki Model #3127 Clamp On HI Tester. Small piece of red plastic is broke but doesn't effect anything. In Case with manual. Very Nice Condition.

2
Remington Powder Actuated Tool #476
Remigton Powder Actuated Tool. Model #476 Looks to be in good condition.

3
Craftsman Molding Head Cutter Set W/ 11 Blades
Craftsman #9 3214 Molding Head Cutter Set 11 Blades included

4
Torch Set
Torch Set with 4 Heads, 2 Extra Tips, about a half bottle of gas. In Metal Case.

5
Skilsaw 7 1/4" Circular Saw
Skilsaw 7 1/4" Circular Saw #5150 Tested and Works

6
Craftsman 3/8 Drill
Craftsman 3/8 Drill Variable Speed Reversible Tested and Works

7
Porter Cable Drywall Driver
Porter Cable Drywall Driver #6645 Reversible Tested and Works

8
Skill 1/2" Drill #425
Skill 1/2" Drill #425 Tested and Works

9
Dewalt Palm Sander
Dewalt Random Orbit Palm Sander #DW421 Tested and Works

10
Milwaukee Hole Hawg Drill
Milwaukee Hole Hawg HD Variable Speed 2 Handles Tested and Works

11
Milwaukee Right Angle 1/2" Drill
Milwaukee Right Angle 1/2" Drill These are nice to have! Tested and works

12
Milwaukee Sawzall
Milwaukee HD Sawzall USA Made 4 amp Tested and Works

13
Milwaukee Sawzall
Milwaukee HD Sawzall 4 Amp Lots of Blades In original Metal Case Tested and Works

14
Rigid #2A Pipe Cutter
Rigid Pipe Cutter #2A 1/8" - 2"

15
Campbell Hausfield 2 Gal Air Compressor
Campbell Hausfield Air Compressor 2 Gallon 100 Max psi Tested and works

16
Schauer Battery Charger
Schauer Battery Charger # cr612 10 amp 6 or 12 volt Charger Works

17
ShopVac Hang Up
Wet/Dry 2.5 gallons 2.5 hp works

18
Delta 5" Bench Grinder
Delta 5" Bench Grinder #23-580 Works and looks Nice!

19
Lester 24 volt Battery Charger
Lester 24 volt Dual Mode Automatic Battery Charger Comes on. Not way to test. Said to be working.

20
Lestronic II 36 Volt Battery Charger
Lestronic II 36 volt Battery Charger Will charge three 12 volt batteries Comes on. No way to test. Said to be working.

21
Solo Backpack Sprayer
Solo Back Pack Sprayer 4 Gallon No wand Looks to be in very nice condition.

22
Rigid #65-R Pipe Threader
Rigid Pipe Threader #65-R 1" - 2" 24" Handle

23
Rigid #206 Soil Pipe Cutter
Rigid #206 Soil Pipe Cutter USA Made Very nice condition Over $500 new!

24
Rigid 00-R Exposed Ratchet Threader Set
Rigid 00-R Exposed Ratchet Threader Set 1/8" - 1" 18" Handle

25
Tornado HEPA Filtration System
Tornado Hepa Filtration System Stainless Steel Tank 4 Stage Hepa Filtration System Rolls nice and easy Great condition Tested and Works

26
Dewalt 18 volt Drill Set (no batteries)
Dewalt 18 volt set Drill, Light, Circular Saw, 2 chargers Chargers are 7.2 volt - 18 volt Said to work but no batteries

27
Redline 640 PC Concrete Saw
Red Line 640 PC Concrete Saw 12" blade Belt Drive Made in Italy I didn't start it myself but said to run good.

28
Brute Double Buckets (4)
Lot of 4 Brute Rubbermaid Double Buckets 8 qt. Model #2617

29
Brute Double Buckets (3)
Lot of 3 Brute Rubbermaid Double Buckets 8 qt. Model #2617

30
Lot of 5 Hand Saws
2 Disston 2 Stanley 1 Unknown

31
Lot of 4 Miter Saws
Lot of 4 Miter Saws Superior 23 1/2" blade 2 - 16" blades 1 - 14" blade

32
Bow Saw Keyhole Saw and Tree Trim Blade
Bow Saw Key Hole Saw Tree Trim Blade

33
Combo Metric Wrench Sets (2) Misc. Wrenches (6)
(2) Sets of Combo Metric Wrench Sets (6) Misc. Wrenches

34
Berylco Brass Wrench
Collectible Berylco Brass Wrench 7/16" and 1/2" 12pt. W990

35
(3) 24" Levels
Stanley 100 plus (missing glass windows) Stanley 42-224 Master Mechanic

36
Johnson Wood Level No. 548
Nice Wood, Johnson #548 Level

37
Misc. Tool Lot
Misc. Tool Lot Lufkin Ruler Jim Dandy Hammer etc.

38
Lot of (3) Electric Drills
(3) Electric Drills Skil 3/8" B & D 1/4" Power House 1/4" All three work.

39
Lot of (10) Hand Tools Pliers etc.
(3) Eklind 3/16" (1) Vicegrips Channellock Cutters 4 pliers

40
Knipex Cobra 12" Water Pump Pliers
Knipex Cobra 12" Water Pump Pliers Self Adjusting #8701300 Made in Germany Very Nice Condition! A Must have in the toolbox!

41
Stanley USA Plane
Stanley USA C559 14" Plane Wood Handles

42
Caulk Guns (3) and Drywall Lift
Lot of (3) Caulk Guns Metal Drywall lift

43
Squares (2) plus lot of Concrete/Mud Tools
(2) Metal Squares Lot of Concrete/ Mason/ Mud Tools

44
Lot of (24) Tools
Screwdrivers Nut Drivers Plus Misc.

45
Reznor Infra-Rez Heater #TR125
Reznor Infra-Rez Heater #TR25 Natural Gas (4) 10 ft. each Heat Tubes (4) Reflective Shields for overtop of heat tubes Chimney All hardware Heater was in the School Woodshop and not used much. Very good condition!

46
Redmax G23L
Redmax G23L 5' Shaft Circular Saw Blade Said to run. I didn't start it myself.

47
Poulan Pro 31cc
Poulan Pro 31cc Has weed wacker attachment also chainsaw/ tree trim attachment Said to run. I didn't start it myself.

48
Lot of (2) Gas Weed Whackers
Bolens BL150 17" Missing Primer ball. Does roll over and has compression Poulon Pro III Doesn't engage when you pull the rope.

49
Black and Decker Electric Hedge Trimmer
B&D Electric Hedge Trimmer 22" Auto Stop

50
Black and Decker Electric Hedge Trimmer
B&D Electric Hedge Trimmer 18"

51
Jackson Wheel Barrow
Jackson Wheel Barrow Thick Steel Heavy Duty Good Solid Wheel Barrow

52
Jackson Wheel Barrow
Jackson Wheel Barrow Thick Steel Left handle is a little chewed up. Tube in tire holds air but the tire has a hole in it and could use replaced. Good, Heavy duty wheel barrow

53
Utilitub Sink
Utilitub 22.5" w x 24.5" deep x 15" H 21.5" Metal legs

54
Agri Fab Tilt Bed Trailer
Agri-Fab Tilt Bed USA Made 5' Long x 3' Wide x 14" sidwalls Nice, atv type tires Very nice condition!

55
UpRight Aluminum Scaffold by Aerial Specialists
UpRight Scaffold by Aerial Specialists Everything is Aluminum Highest USA Made Quality (12) 8' Horizontal and Diagnal Braces (6) Outriggers 10) Guardrail and Extension Frames (3) Platforms (1) Folding Base with wheels (11) Castor Wheels All of this...

56
Air Compressor Speedaire 60 Gallon
Speedaire 60 Gallon Air Compressor Model # 4B221 Cast Iron Series Made in USA 240 Volt 1 Phase High Quaility air compressor that works and looks great!

57
Lot of (6) Tables w/Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

58
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

59
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

60
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

61
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

62
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

63
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

64
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

65
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

66
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

67
Craftsman Double Stack Tool Box
Craftsman Tool Top section is 10 Drawers plus Top opens Bottom has 3 Drawers plus bottom cabinet. Top does not have key. Bottom cabinet locks and has key Total 50" Tall x 27" wide x 18" deep In good condition.

68
Elston Roll on Cargo Heater
Elston Catalytic roll on Cargo Heater Holds one 20 lb. Propane Tank 18,000 btu On wheels to roll around. 76" tall x 17" wide x 17" deep

69
Graco Magnum Texfinish
Graco Magnum Texfinish TX90 Series J09A 289 Hours 2 Spray guns Everything looks good Was told it works good I plugged it in and it came on.

70
Porcelain Gas Station Light
Porcelain Gas Station Light Made by Benjamin USA 16" w x 18" H Original hardware and in great condition!

71
Porcelain Gas Station Light
Porcelain Gas Station Light Made by Benjamin USA 16" w x 18" H Original hardware One chip on to side otherwise in great condition!

72
Porcelain Gas Station LIght
Porcelain Gas Station Light Made by Benjamin USA 16" w x 18" H Original hardware and in great condition!

73
Stainless Steel Heater
Stainless Steel Heater Heat with coal or wood. Neat, small heater. 13" H x 8 1/2" W 2" chimney

74
Stanley #135
Stanley #135 Liberty Bell 10" long x 2.5" wide There is a crack on back handle

75
Stanley # 22 Smooth Plane
Stanley #22 Smooth Plane

76
Stanley #26 Jack Plane
Stanley #26 Jack Plane 15" Long x 2" cutter width Nice!

77
Stanley #12 Veneer Scraper
Stanley #12 Veneer Scraper

78
Stanley #192 Rabbet Shave
Stanley #192 Rabbet Shave Nice condition.

79
Rabbet Shave USA
Rabbet Shave Only says USA on it Nice

80
Anvil
Small Anvil base is 5" x 3.5" Top is 9.5" end to end

81
Old Log Auger
ES & W Log Auger 18" Handle 18" bit Very Nice

82
Old Meat Cleaver
One side of wood handle is missing 9" blade

83
Bellota Machete
Bellota Machete 28" Long Marca Registrada High quality Knifes

84
Remington Knife
Remington RH36 USA Made 6 1/4"

85
Coleman Powermate Nailer/ Stapler
Coleman Powermate Air Nailer/ Stapler Looks like new!

86
Rotozip
Rotozip Spiral Saw SCS01 Looks to be in good condition I plugged it in and it ran and sounded good.

87
Louden A23 Pulley
Louden A23 Pulley Wood Pulley, Metal frame 6" diameter Pulley rolls

88
1/2" Socket Set
1/2" Socket Set Do-It-Best CR-V 1/2" - 15/16"

89
Little Giant Adjustable Die Set
Little Giant Adjustable Die Set NO. 310 Looks like a couple missing pieces Wood case is in good condition too.

90
Metal Cabinet
Metal Cabinet 5' High Made by Interstate Metal Products Good and Solid

91
Metal Cabinet
Metal Cabinet 65 1/4" High Good and Solid

92
Neat Metal Desk
All Metal Desk By Penco USA 34" wide 30" Deep Adjustable Height

93
46" Snow Plow Blade
Looks like it came off a tractor? Blade is solid and in good condition.

94
4 Drawer File Cabinet
Steelmaster 4 Drawer File Cabinet 15" wide Couple handles are loose but cabinet is good condition.

95
4 Drawer File Cabinet
Hirxh 4 Drawer File Cabinet 18" wide Has lock but no key Good, solid condition.

96
Torch Cart
Torch Cart Fits 2 Tanks Great condition!

97
2 Bench Grinders on Stand
2 Bench Grinders Dunlap 1/3 Horsepower Craftsman 1/2 Horsepower Mounted on Cast Iron Stand Looks to be a Heavy Duty Truck Rear End Both Grinders are tested and both work great Grind with a friend!

98
Coleman Powermate Generator
Coleman Powermate 54 Series Briggs and Stratton 8 HP 4000 Watts Runs good and works.

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Meridian Public Schools Surplus Auction Plus More
 Online Only Auction
Auction Date(s)
Bidding Starts: Friday Feb 15
Bidding Ends: Sunday Feb 24
Auction Location

auburn, MI 48611
Company
J Marsh Auctions and Estate Sales

Contact: Jason Marsh
Phone: 989-615-2170
Website: www.jmarshauctionsandestatesales.com

Listing Terms and Conditions
Auction Terms & Conditions By registering and bidding on any item, the bidder/buyer shows acceptance of the following terms and conditions. Do not register or bid unless you agree to all of the terms and conditions: REGISTRATION: All information provided by bidder/buyer during the registration process must be current, complete, and accurate. Bidders must be 18 years of age or older. J Marsh Auctions at its sole discretion, may deny registration to any person or entity. DISCLAIMER: All lots are sold "AS-IS, WHERE-IS", with all faults, imperfections and errors. J Marsh Auctions and the seller(s) do not give or make any type of guarantee or warranty regarding the lots to be sold, implied or otherwise. J Marsh Auctions encourages all bidders to inspect lots in person before bidding. J Marsh Auctions has put forth every effort in preparing the catalog for every auction to provide accurate descriptions of all items, however, it is the bidder's responsibility to determine the condition and suitability of each lot. Due diligence is the responsibility of the bidder/buyer. Printed statements or descriptions by staff are provided in good faith and are matters of opinion. Any bidder's failure to inspect, or to be fully informed on the quality or condition will not constitute grounds for any claim, adjustment, refund, termination of the purchase contract, or refusal to close the sale. If you are unsure about any of the Term and Conditions, pricing, or how to bid; IF YOU ARE IN ANY WAY UNSURE AS TO ANY MATTER HEREIN, J Marsh Auctions URGES YOU TO NOT BID. CONDUCT OF THE AUCTION: Conduct of the auction and increments of bidding are at the direction and discretion of J Marsh Auctions. J Marsh Auctions reserves the right to reject any and all bids for any reason and also reserves the right to cancel this auction, or remove any item or lot from this auction prior to the close of bidding. WE ACT ONLY AS AGENTS FOR THE SELLER. Sellers or their agents reserve the right to bid on their own behalf to protect their investment(s). All decisions of J Marsh Auctions are final. MAX BID: When you place your maximum bid, the current bid price doesn't automatically jump to your max bid. Your bid will go to the next highest increment and will be increase as other people bid against you. The computer will automatically bid up to your max in the increments specified. By placing any bids you have agreed by legal contract that your bid or max bid is what you are willing to pay for that specific lot(s) and may have to pay full bid or max bid amount of any bids placed. The buyer agrees and is responsible for every bid amount placed. Remember, J Marsh Auctions or anybody for that matter DO NOT force you to place any bid, you and you alone are responsible for your actions. Please bid accordingly. . BUYER'S PREMIUM AND SALES TAX: Unless a specific auction states otherwise, a 10% buyer's premium will be charged on all items and lots. Every bidder/buyer pays the same buyer's premium and should bid accordingly. For example, if you bid $100 on an item at the auction you will be charged $110 for the item on your auction invoice. Please take this into consideration when bidding. 6% MI Sales Tax applies. (Coins & Currency are Sales Tax Exempt) (Farm Use and Sales Tax Exempt will need to fill out an Exemption Form). AUCTION ENDING: Beginning at the stated closing time, the auction software will conclude bidding for one lot every few seconds in catalog order with the following exception: if a bid is placed in the last two (2) minutes remaining for that auction lot, bidding for that lot will automatically extend the auction for additional two (2) minutes. Some lots may be grouped together so that a bid on one lot will extend the time on all lots in that group. An e-mail of invoice will be sent to the winning bidder/buyer of each auction after auction has completely closed. PAYMENT: All buyers must pay for their purchases in full within the scheduled removal dates after auction ending. : Cash, Checks, Money Orders, Cashiers Checks or Credit Card. J Marsh Auctions WILL NOT ACCEPT ANY CREDIT CARD PURCHASES OVER $1,000.00. ALL PURCHASES OVER $1,000.00 MUST BE WITH CASH, MONEY ORDER or CASHIERS CHECK. UNLESS PRE APPROVED. Merchandise becomes the full responsibility of the bidder/buyer at time of payment and the bidder/buyer assumes all risk of loss and damage to property at that time. Please check the details before placing your bid. ITEM PICK UP & REMOVAL: All successful bids must be picked up within scheduled removal dates of that specific auction unless other arrangements have been made. No items can be removed until, J Marsh Auctions has received and acknowledged payment in full. Any items not picked up by scheduled removal dates (for that specific auction), there will be a $3 per day storage fee starting after removal dates. J Marsh Auctions will hold purchases for 14 business days. After the 14 business days have expired you will forfeit all items of ownership back to J Marsh Auctions. J Marsh Auctions reserves the right to resell any property not paid for in full by the conclusion of the stated removal period. Buyers are responsible for rigging, loading, and removal of all items purchased without assistance from J Marsh Auctions. SUSPENSION / PERMANENT BAN: A bidder/buyer will be suspended or permanently banned from J Marsh Auctions Online Auctions for providing false or fraudulent information when registering. A bidder/buyer will be permanently banned from J Marsh Auctions Online Auctions for failing to honor the "REMOVAL" terms made under that bidder/buyer registration. TECHNICAL ISSUES: In the event there are technical difficulties related to the server, software, internet or any other online auction-related technologies, J Marsh Auctions reserve the right to extend bidding, continue the bidding, or close the bidding. Neither the company providing the software, nor J Marsh Auctions shall be held responsible for a missed bid or the failure of the software to function properly for any reason. BEFORE THE AUCTION: You may attend pre-sale viewing for all of our auctions. All property to be auctioned will have a designated preview time and place. You are encouraged to examine lots thoroughly. IMPORTANT NOTE: Your bid is a legally binding contract, no exceptions. Winning bidder agrees to indemnify and hold harmless sellers, auctioneers, auctioneers employees, auction company owners, directors, etc. etc. from all claims, fees, judgments, expenses, disputes, legal fees etc. etc. If you fail to pick up your items on the load out day and don't contact us we will bill your credit card used upon registration for this auction. Please contact us for any additional questions. J Marsh Auctions and Estate Sales Call or Text (989) 615-2170
Items 1 - 66 are Meridian Public Schools Surplus. Proceeds will go to the Meridian Schools General Fund. All of their items were in good, working condition unless noted. Great way to support the schools and get some nice stuff! Items 67 and on are other consignments. Thank you for bidding!

1
HIOKI 3127 Clamp On HI Tester
Hioki Model #3127 Clamp On HI Tester. Small piece of red plastic is broke but doesn't effect anything. In Case with manual. Very Nice Condition.

2
Remington Powder Actuated Tool #476
Remigton Powder Actuated Tool. Model #476 Looks to be in good condition.

3
Craftsman Molding Head Cutter Set W/ 11 Blades
Craftsman #9 3214 Molding Head Cutter Set 11 Blades included

4
Torch Set
Torch Set with 4 Heads, 2 Extra Tips, about a half bottle of gas. In Metal Case.

5
Skilsaw 7 1/4" Circular Saw
Skilsaw 7 1/4" Circular Saw #5150 Tested and Works

6
Craftsman 3/8 Drill
Craftsman 3/8 Drill Variable Speed Reversible Tested and Works

7
Porter Cable Drywall Driver
Porter Cable Drywall Driver #6645 Reversible Tested and Works

8
Skill 1/2" Drill #425
Skill 1/2" Drill #425 Tested and Works

9
Dewalt Palm Sander
Dewalt Random Orbit Palm Sander #DW421 Tested and Works

10
Milwaukee Hole Hawg Drill
Milwaukee Hole Hawg HD Variable Speed 2 Handles Tested and Works

11
Milwaukee Right Angle 1/2" Drill
Milwaukee Right Angle 1/2" Drill These are nice to have! Tested and works

12
Milwaukee Sawzall
Milwaukee HD Sawzall USA Made 4 amp Tested and Works

13
Milwaukee Sawzall
Milwaukee HD Sawzall 4 Amp Lots of Blades In original Metal Case Tested and Works

14
Rigid #2A Pipe Cutter
Rigid Pipe Cutter #2A 1/8" - 2"

15
Campbell Hausfield 2 Gal Air Compressor
Campbell Hausfield Air Compressor 2 Gallon 100 Max psi Tested and works

16
Schauer Battery Charger
Schauer Battery Charger # cr612 10 amp 6 or 12 volt Charger Works

17
ShopVac Hang Up
Wet/Dry 2.5 gallons 2.5 hp works

18
Delta 5" Bench Grinder
Delta 5" Bench Grinder #23-580 Works and looks Nice!

19
Lester 24 volt Battery Charger
Lester 24 volt Dual Mode Automatic Battery Charger Comes on. Not way to test. Said to be working.

20
Lestronic II 36 Volt Battery Charger
Lestronic II 36 volt Battery Charger Will charge three 12 volt batteries Comes on. No way to test. Said to be working.

21
Solo Backpack Sprayer
Solo Back Pack Sprayer 4 Gallon No wand Looks to be in very nice condition.

22
Rigid #65-R Pipe Threader
Rigid Pipe Threader #65-R 1" - 2" 24" Handle

23
Rigid #206 Soil Pipe Cutter
Rigid #206 Soil Pipe Cutter USA Made Very nice condition Over $500 new!

24
Rigid 00-R Exposed Ratchet Threader Set
Rigid 00-R Exposed Ratchet Threader Set 1/8" - 1" 18" Handle

25
Tornado HEPA Filtration System
Tornado Hepa Filtration System Stainless Steel Tank 4 Stage Hepa Filtration System Rolls nice and easy Great condition Tested and Works

26
Dewalt 18 volt Drill Set (no batteries)
Dewalt 18 volt set Drill, Light, Circular Saw, 2 chargers Chargers are 7.2 volt - 18 volt Said to work but no batteries

27
Redline 640 PC Concrete Saw
Red Line 640 PC Concrete Saw 12" blade Belt Drive Made in Italy I didn't start it myself but said to run good.

28
Brute Double Buckets (4)
Lot of 4 Brute Rubbermaid Double Buckets 8 qt. Model #2617

29
Brute Double Buckets (3)
Lot of 3 Brute Rubbermaid Double Buckets 8 qt. Model #2617

30
Lot of 5 Hand Saws
2 Disston 2 Stanley 1 Unknown

31
Lot of 4 Miter Saws
Lot of 4 Miter Saws Superior 23 1/2" blade 2 - 16" blades 1 - 14" blade

32
Bow Saw Keyhole Saw and Tree Trim Blade
Bow Saw Key Hole Saw Tree Trim Blade

33
Combo Metric Wrench Sets (2) Misc. Wrenches (6)
(2) Sets of Combo Metric Wrench Sets (6) Misc. Wrenches

34
Berylco Brass Wrench
Collectible Berylco Brass Wrench 7/16" and 1/2" 12pt. W990

35
(3) 24" Levels
Stanley 100 plus (missing glass windows) Stanley 42-224 Master Mechanic

36
Johnson Wood Level No. 548
Nice Wood, Johnson #548 Level

37
Misc. Tool Lot
Misc. Tool Lot Lufkin Ruler Jim Dandy Hammer etc.

38
Lot of (3) Electric Drills
(3) Electric Drills Skil 3/8" B & D 1/4" Power House 1/4" All three work.

39
Lot of (10) Hand Tools Pliers etc.
(3) Eklind 3/16" (1) Vicegrips Channellock Cutters 4 pliers

40
Knipex Cobra 12" Water Pump Pliers
Knipex Cobra 12" Water Pump Pliers Self Adjusting #8701300 Made in Germany Very Nice Condition! A Must have in the toolbox!

41
Stanley USA Plane
Stanley USA C559 14" Plane Wood Handles

42
Caulk Guns (3) and Drywall Lift
Lot of (3) Caulk Guns Metal Drywall lift

43
Squares (2) plus lot of Concrete/Mud Tools
(2) Metal Squares Lot of Concrete/ Mason/ Mud Tools

44
Lot of (24) Tools
Screwdrivers Nut Drivers Plus Misc.

45
Reznor Infra-Rez Heater #TR125
Reznor Infra-Rez Heater #TR25 Natural Gas (4) 10 ft. each Heat Tubes (4) Reflective Shields for overtop of heat tubes Chimney All hardware Heater was in the School Woodshop and not used much. Very good condition!

46
Redmax G23L
Redmax G23L 5' Shaft Circular Saw Blade Said to run. I didn't start it myself.

47
Poulan Pro 31cc
Poulan Pro 31cc Has weed wacker attachment also chainsaw/ tree trim attachment Said to run. I didn't start it myself.

48
Lot of (2) Gas Weed Whackers
Bolens BL150 17" Missing Primer ball. Does roll over and has compression Poulon Pro III Doesn't engage when you pull the rope.

49
Black and Decker Electric Hedge Trimmer
B&D Electric Hedge Trimmer 22" Auto Stop

50
Black and Decker Electric Hedge Trimmer
B&D Electric Hedge Trimmer 18"

51
Jackson Wheel Barrow
Jackson Wheel Barrow Thick Steel Heavy Duty Good Solid Wheel Barrow

52
Jackson Wheel Barrow
Jackson Wheel Barrow Thick Steel Left handle is a little chewed up. Tube in tire holds air but the tire has a hole in it and could use replaced. Good, Heavy duty wheel barrow

53
Utilitub Sink
Utilitub 22.5" w x 24.5" deep x 15" H 21.5" Metal legs

54
Agri Fab Tilt Bed Trailer
Agri-Fab Tilt Bed USA Made 5' Long x 3' Wide x 14" sidwalls Nice, atv type tires Very nice condition!

55
UpRight Aluminum Scaffold by Aerial Specialists
UpRight Scaffold by Aerial Specialists Everything is Aluminum Highest USA Made Quality (12) 8' Horizontal and Diagnal Braces (6) Outriggers 10) Guardrail and Extension Frames (3) Platforms (1) Folding Base with wheels (11) Castor Wheels All of this...

56
Air Compressor Speedaire 60 Gallon
Speedaire 60 Gallon Air Compressor Model # 4B221 Cast Iron Series Made in USA 240 Volt 1 Phase High Quaility air compressor that works and looks great!

57
Lot of (6) Tables w/Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

58
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

59
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

60
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

61
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

62
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

63
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

64
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

65
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

66
Lot of (6) Tables with Folding Legs
(6) Wood top tables with heavy duty metal legs and frame 17.5" wide x 6' Long x 29" H some have some chipped formica All legs and frames are good and sturdy

67
Craftsman Double Stack Tool Box
Craftsman Tool Top section is 10 Drawers plus Top opens Bottom has 3 Drawers plus bottom cabinet. Top does not have key. Bottom cabinet locks and has key Total 50" Tall x 27" wide x 18" deep In good condition.

68
Elston Roll on Cargo Heater
Elston Catalytic roll on Cargo Heater Holds one 20 lb. Propane Tank 18,000 btu On wheels to roll around. 76" tall x 17" wide x 17" deep

69
Graco Magnum Texfinish
Graco Magnum Texfinish TX90 Series J09A 289 Hours 2 Spray guns Everything looks good Was told it works good I plugged it in and it came on.

70
Porcelain Gas Station Light
Porcelain Gas Station Light Made by Benjamin USA 16" w x 18" H Original hardware and in great condition!

71
Porcelain Gas Station Light
Porcelain Gas Station Light Made by Benjamin USA 16" w x 18" H Original hardware One chip on to side otherwise in great condition!

72
Porcelain Gas Station LIght
Porcelain Gas Station Light Made by Benjamin USA 16" w x 18" H Original hardware and in great condition!

73
Stainless Steel Heater
Stainless Steel Heater Heat with coal or wood. Neat, small heater. 13" H x 8 1/2" W 2" chimney

74
Stanley #135
Stanley #135 Liberty Bell 10" long x 2.5" wide There is a crack on back handle

75
Stanley # 22 Smooth Plane
Stanley #22 Smooth Plane

76
Stanley #26 Jack Plane
Stanley #26 Jack Plane 15" Long x 2" cutter width Nice!

77
Stanley #12 Veneer Scraper
Stanley #12 Veneer Scraper

78
Stanley #192 Rabbet Shave
Stanley #192 Rabbet Shave Nice condition.

79
Rabbet Shave USA
Rabbet Shave Only says USA on it Nice

80
Anvil
Small Anvil base is 5" x 3.5" Top is 9.5" end to end

81
Old Log Auger
ES & W Log Auger 18" Handle 18" bit Very Nice

82
Old Meat Cleaver
One side of wood handle is missing 9" blade

83
Bellota Machete
Bellota Machete 28" Long Marca Registrada High quality Knifes

84
Remington Knife
Remington RH36 USA Made 6 1/4"

85
Coleman Powermate Nailer/ Stapler
Coleman Powermate Air Nailer/ Stapler Looks like new!

86
Rotozip
Rotozip Spiral Saw SCS01 Looks to be in good condition I plugged it in and it ran and sounded good.

87
Louden A23 Pulley
Louden A23 Pulley Wood Pulley, Metal frame 6" diameter Pulley rolls

88
1/2" Socket Set
1/2" Socket Set Do-It-Best CR-V 1/2" - 15/16"

89
Little Giant Adjustable Die Set
Little Giant Adjustable Die Set NO. 310 Looks like a couple missing pieces Wood case is in good condition too.

90
Metal Cabinet
Metal Cabinet 5' High Made by Interstate Metal Products Good and Solid

91
Metal Cabinet
Metal Cabinet 65 1/4" High Good and Solid

92
Neat Metal Desk
All Metal Desk By Penco USA 34" wide 30" Deep Adjustable Height

93
46" Snow Plow Blade
Looks like it came off a tractor? Blade is solid and in good condition.

94
4 Drawer File Cabinet
Steelmaster 4 Drawer File Cabinet 15" wide Couple handles are loose but cabinet is good condition.

95
4 Drawer File Cabinet
Hirxh 4 Drawer File Cabinet 18" wide Has lock but no key Good, solid condition.

96
Torch Cart
Torch Cart Fits 2 Tanks Great condition!

97
2 Bench Grinders on Stand
2 Bench Grinders Dunlap 1/3 Horsepower Craftsman 1/2 Horsepower Mounted on Cast Iron Stand Looks to be a Heavy Duty Truck Rear End Both Grinders are tested and both work great Grind with a friend!

98
Coleman Powermate Generator
Coleman Powermate 54 Series Briggs and Stratton 8 HP 4000 Watts Runs good and works.