Virginia- 2 Real Estates and Equipment
Previous Page Listing ID#: 247328

Auction Location

Blackstone, VA 23824
Auction Dates and TimesSALE IS COMPLETED
Tuesday Dec 15, 2020 Completed
Auction Type
 Live Auction 
Company Information
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Email: beachyauctions@gmail.com
Website: brightstarauctions.com

GoToAuction.com ID#: 5286
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.


“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.


 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  1. Auction Conducted in the State of Indiana.
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
    1. Online Bids. Online bids may not be reduced or retracted.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  1.  
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Information
Oak Valley Hardwoods at Blackstone, VA.


32.5 acres of land to include: Irregular shaped brick and block construction with concrete floor. Steel truss roof supports with newly replaced roof in fall of 2003. Approximately 61,250 sq. ft., includes finished office space, restrooms, and manufacturing area. SHED OVER GRADING LINE to include 35'x180' (6300 qu.ft) wooden columns with wood trusses, metal roof, concrete floor and apron. 35'x50' (1,750 sq. ft.) section has metal skin on 4 sides (Permanent). GRADING BUILDING: 35'x50' (1750 sq.ft.). SORTING BUILDING 135'x30' (4,050 sq.ft.). Wood column and wood truss with metal walls and roof, 1 side of green chain has siding, has 35'x150' concrete apron (5250 sq. ft.). IRVINGTON MOORE DRY KILNS: (1987-1989 with repairs in 2005) . Kiln #1: 80,000 board feet, 35'Lx 80' W x 30' H. Kiln #2: 30,000 board feet, 40' L x40' W x30' H. Kiln # 3: 30,000 board feet, 40' L x40' W x30' H. Kiln #4: 50,000 board feet, 40' L x45' W x30' H. Kiln #5-9: 75,000 board feet each. 40' L x 62'2" W x30' H. Each has 6' concrete block and brick construction with prefabricated metal roof and aluminum doors. Lignomat controls (computerized). Irvington Moore original controls. Includes Cutler Hammer 200 amp disconnect, 5 KVA transformer, Cutler Hammer 100 amp disconnect, (5) 60 amp disconnects, (6) 30 amp disconnects.

Real Estate at 9 am. Online and in person bidding accepted followed by catalog equipment lots. 

If you have any questions, please call Zach Kittrell at 931-224-0699 or email at zkittrell@aol.com
 

1
REAL ESTATE 32.5 acres of land
32.5 acres of land to include: Irregular shaped brick and block construction with concrete floor. Steel truss roof supports with newly replaced roof in fall of 2003. Approximately 61,250 sq. ft., includes finished office space, restrooms, and manufacturing area. SHED OVER GRADING LINE to include 35'x180' (6300 sq.ft) wooden columns with wood trusses, metal roof, concrete floor and apron. 35'x50' (1,750 sq. ft.) section has metal skin on 4 sides (Permanent). GRADING BUILDING: 35'x50' (1750 sq.ft.). SORTING BUILDING 135'x30' (4,050 sq.ft.). Wood column and wood truss with metal walls and roof, 1 side of green chain has siding, has 35'x150' concrete apron (5250 sq. ft.). IRVINGTON MOORE DRY KILNS: (1987-1989 with repairs in 2005) . Kiln #1: 80,000 board feet, 35'Lx 80' W x 30' H. Kiln #2: 30,000 board feet, 40' L x40' W x30' H. Kiln # 3: 30,000 board feet, 40' L x40' W x30' H. Kiln #4: 50,000 board feet, 40' L x45' W x30' H. Kiln #5-9: 75,000 board feet each. 40' L x 62'2" W x30' H. Each has 6' concrete block and brick construction with prefabricated metal roof and aluminum doors. Lignomat controls (computerized). Irvington Moore original controls. Includes Cutler Hammmer 200 amp disconnect, 5 KVA transformer, Cutler Hammer 100 amp disconnect, (5) 60 amp disconnects, (6) 30 amp disconnects. NOTE: This is the only lot in the auction that is offered with a reserve. It is a very low reserve, so be sure to make arrangements to bid! SELLER WILL FURNISH CLEAR TITLE VIA WARRANTY DEED. 

2
Kenbridge Commercial Real Estate
 21.6 acres and improvements selling without reserve!
Main building is 17,300 square feet approximately
Property also includes numerous smaller buildings including an office building Large industrial property selling absolute! Public is welcome to inspect the property during daylight hours. Please be cautious- anyone entering the property does so at their own risk and assumes all liability. Ten percent of purchase price down day of auction (nonrefundable). Balance due at closing in approximately 60 days. Ten percent buyer's premium will be added to the winning bid to determine purchase price. Seller will furnish clear title via warranty deed.

5
Strapping tool
Fromm P331 strapping tool

6
strapping cart

7
Strapping cart and tools

8
Pallet
Pallet of 1" plastic strap

9
plastic strap
rolls of plastic strapping

10
Barrels of Lumber Marker
(4) 55 gallon barrels of lumber marker. Dark forest green (new) still wrapped in pallet

11
Pedestal fans
(3) Pedestal fans

12
Wall Mounted Fans
(50 Wall Mounted Fans

13
Factory Floats
(9) factory floats

14
Step Ladders

15
Tool Station
Tool station mounted on steel frame, Miller Dial Arc 205 AC/DC welder, tool box with contents, and torch set.

16
Contents of room
Contents of room to include but not limited to drives, 2 steel work tables, bolt bin, shelves with parts as marked

17
Air Compressor
10 HP Tank mount air compressor with controls as marked

18
Hand tools
Lot of hand tools

19
Misc. in room
Misc. in corner of room to include (7) 21" saw blades, control boxes, and mystery box

20
Saw Blades
Lot of misc. saw blades on wall in office

21
Contents of office
Contents of office: (4) microwaves, refrigerator, window AC, tables, and desk

22
Lugged Chain
2 pallets of 81X lugged chain

23
Fan blade
72" fan blade

24
Welder
Lincoln Ideal Arc 250 welder

25
Lockers and Contents
Lockers and contents

26
Drill Press
Akins Precision drill press

27
Stencil cutting machine
Diagraph stencil cutting machine

28
Dual Bench Grinder

29
Contents of rooms not all ready sold
Contents of (3) rooms not already sold as marked

80
Stacking sticks
100 bundles of 6' stacking sticks
 

81
Bunk Dividers
Several 4x4 bunk dividers

90
Lumber
Several bundles of lumber.

100
Lumber Breakdown System
Lumber Breakdown System, 6' 3 arm 25'x11' 3 strand package deck, H-78 chain, 16'x12' transfer deck with 81x lugged chain, 22'x12" stick removal belt conveyor, all drives. No motor controls. First lot of an entirety.

101
Stick Stacking System
Automatic stick stacking system with sling type bin. Controls attached.

102
Lumber Transfer Deck
27'x12' 4 strand lumber transfer deck with Cleveland gear reduction drive

103
Lumber Transfer Deck
5' x13' lumber transfer to feed trimmer with C55B rooftop chain and gear reduction

104
Multi Saw Trimmer
Newman KNO Wheel lift multi saw trimmer. They were using it as 14' trim saw with 1' saw but will pass 20' lumber includes controls attached and belt block conveyor under trimmer

105
Lumber Outfeed Conveyor
6' Lumber outfeed conveyor with 81X chain, (7) 5'x6" even ender rolls and gear motor drive

106
Sorting Deck
80'x10'6" Sorting deck; 4 strand. 1 strand C55D roof top chain, (3) strands C55 chain, gear reduction drive

107
Motor Control Panel
Motor control center with 150 amp switch, starters and controllers

108
Trim Saw Blades
(13) 24" Trim saw blades on wall

109
Tie Back
Items 100-108 tied together with 10% raise

110
Lumber Rack
8'x9' Double Racking Lumber Rack

110A
Lumber Cart

110B
Lumber Rack
8'x9' Double Racking Lumber Rack

110C
Lumber Rack
8'x9' Double Racking Lumber Rack

110D
Lumber Rack
8'x9' Double Racking Lumber Rack

110E
Lumber Rack
8'x9' Double Racking Lumber Rack

110F
Lumber Rack
8x12' Double Racking Lumber Rack

110G
Lumber Rack
8x12' Double Racking Lumber Rack

110H
Lumber Rack
8x12' Double Racking Lumber Rack

110I
Lumber Rack
8x12' Double Racking Lumber Rack

110J
Lumber Rack
8x12' Double Racking Lumber Rack

110K
Lumber Rack
8x12' Double Racking Lumber Rack

110L
Lumber Cart
4'x10' Lumber Cart

110M
Lumber Cart
4'x15' Lumber Cart

110N
Lumber Cart
4'x11' Lumber Cart

110O
Lumber Cart
4'x6' Lumber Cart

110P
Lumber Cart
4'x10' Lumber Cart

110Q
Steel rack
4'x12' Steel Rack

110R
Lumber Cart
4'x8' steel rack

110S
Lumber Cart
4'x6' Lumber Cart

111
Switch
60 amp switch, 200 amp switch

112
Switch
GE 400 amp switch

113
motor controls
(4) GE motor controls

114
Control Panel
Control Panel with 200 amp, 100 amp switches, Allen Bradley Size 3 starters, Eaton motor control

115
Blower
New York Blower Company Size 224 LS shop#P02836 100 with 20 HP motor

116
Blower Stand
Blower stand

116A
Straight Line Rip Saw
Diehl SL52 Straight line Rip Saw (sn: 73M-3262-2498)

116B
Roll case
8'x8" Infeed roll case

116C
Steel table
42"x20" steel table

116d
outfeed
Indexing outfeed

117
Break Down System
6' 4 Arm tilting break down system, 20'x12" wide package deck with 81X chain, Tulsa winch drive, 22'x12" stick removal belt conveyor with drive

118
Stick Stacking System
Automatic stick stacking system with sling type stacking

119
Transfer Deck
14'x13' wide 5 strand transfer deck with 6' let down arms to planer. No drive, 55 chain

120
Double Surfacer
Newman S282-2 24" wide double surfacer (sn: 14937) 50 HP motor on bottom heard and 60 HP motor on top head, knives, cut quiet helical carbide cutter heads includes Newman control center, 20 HP Hydraulic pack and outfeed press rolls

121
Belt Conveyor
13'x24" Infeed belt conveyor with drive

122
Blower
32" Blower and approx 15 HP motor. No pipe

122A
Blower Stand

123
Air Compressor
Ingersol Rand Air Compressor Model SSR-EP15U (sn: J3395U91R) 15 HP

124
Reserve Air Tank
Reserve air tank

157A
Clean out bucket
clean out bucket

125
Label Printer
Zebra ZT410 Label Printer

126
Paint system and paint
ARO MP 4008 Air operated paint system and paint

127
Motor control center
Ge 100 amp motor control center

128
steel rack
4'x8' steel rack

129
steel rack
steel roll around rack 40"x8'

129A
steel rack
4'x8' steel rack

130
Hog and Hopper
Williams 32"x34" Hog with 75 HP motor (sn: 14604) and a hopper. No motor controls

131
Belt Conveyor
50'x24" Belt conveyor with motor and drive

132
Blower
Carolina size 50-6 (sn: 5093) blower with 50 HP motor No controls

133
Control Panel
Control Panel: 200 amp switch for Danfuss Compact Starter MCD202, 150 amp switch for Danfuss Compact starter MCD 202, VLT micro drive. No wire or conduit

134
Control Panel

135
Switch
GE 400 amp switch

136
Dust Pipe
Outfeed dust pipe from Blowers, Planer and Hog

137
Air Compressor
Sullair Air Compressor Model 16-506 (sn: 9109-FLF) 56, 148 hours.

138
Reserve Air Tank
Reserve air tank

139
Air Dryer

140
Sticker Stacking System
Complete 6' blade sticker stacking system to include but not limited to 25'x10' 3 strand package deck, 814 chain falk gear motor drive. First lot of an entirety.

141
Waterfan Unscrambler
HE Wilson 6' 4 Chain Waterfall Unscrambler 814 chain and Scymco drive

142
Transfer Deck
18'x 12'6" transfer deck with C55B roof top chain and drive

143
Sticker Stacking System
6' 5 Arm Blade sticking stacker system, controls as marked, above ground elevator let down 17 rollcase with (7) 6"x6' live rolls. Includes gear motor drive operated.

144
Gravity Rollcase
25' Gravity Rollcase (10) 6"x6' Rolls

145
Cat Walk and Stairs
Catwalk and stairs

146
Tie Back
Items 140-144 tied back together with a 10% raise

147
Air Compressor
2018 Garden Denver 15 HP tank mount air compressor (sn: D180163)

148
Torpedo heater
Master Torpedo Heater

149
Fan
(4) fans mounted on wall

150
Motor Control Panel
Allen Bradley motor control panel

151
Size 3 Starter
Allen Bradley size 3 starter

152
Anchor seal and pump
Barrel of anchor seal and pump

153
Zebra Printer
Zebra 21410 printer

154
Closet and contents
closet and contents to include refrigerator

155
Lumber Dip Tank
6x20' Lumber Dip Tank outside with dimensions of tank being 6'6" x 20'6". Hydraulic lift

301
Flat Bed for Truck

155A
Fuel tank
4' diameter by 6' fuel tank

155B
fuel pump
Electric fuel pump

155c
steel stand
7'x5' steel stand

155D
steel rack
7'x5' steel stand

155E
Concrete containment bins
(2) 5'x8'6"x30" deep concrete containment bins

155F
Control Panel

156
Clean out bucket

156A
Clean up bin
8'x8'x4' deep clean up bin

157
Stick racks
stick racks

158
Cyclone
5' cyclone with star feeder and misc. pipe

159
Fuel tank and concrete containment bin

159A
Trash bin

160
Dust Silo
18' diameter x 32' tall Dust Silo. Bolt together with unloader includes cyclone on top. No dust pipe. 1st lot of an entirety

161
Elevator Dust Loading System
Silver Sweet Elevator dust loading system. Model Queen (sn: 139377) with controls. Is approx. 50' tall.

162
Dust Loading System
Dust loading system with auger dust removal conveyor

163
Dust house with stand
10' Diameter Carter Day dust house with stand and star feeder and auger to dust house

163A
Bag house system and stand
Carter Bag house system with stand 10' diameter

164
Cyclone
Approx 10' Cyclone with stand and star feeder

165
Blower
Carolina Blower Model 45-6 (sn: 5274) with 20 hp motor. Transition pipe only.

166
Dust Pipe
All dust pipe connect to dust system in and outfeed

167
Belt Conveyor
60'x16" belt conveyor with supports covered with drive

168
Entirety COMPLETE DUST SYSTEM
ITEMS 160 THRU 167 TIED TOGETHER WITH 10% RAISE

170
Molder
Weinig Unimat 17A molder, 5 spindles with electrical control panel

170A
Profile grinder
Weinig Rondamat 931 profile grinder

170B
Molder heads
Lot of heads for wieng molder

170C
Profile knives
Lot of profile knive for wieng molder

170D
Blades for rip saw

170E
Trimmer blades
Lot of trimmer blades

170F
Bench grinder

171
Gang Rip Saw
Mereen Johnson 419-DCS (sn: MJ-3297) Gang Rip Saw;21" with 12' infeed table

172
Surfacer
Whitney model 97, 40" surfacer, top 50 hp, bottom 30 hp (sn: 16062) with infeed conveyor and steel landing table

173
Belt Conveyor
13'x44" belt conveyor with drive

174
Planer
Oliver Strato-O-Planer Model 170 E (sn: (89442)

175
Double End Trimmer
Greenlee Double End Tennon Machine Model 542 shop# 613-28

176
Straight Line Rip Saw
Mattison 404 Straight line rip saw chain is not 95% maybe 20% sorry for the misinformation 

177
Belt Sander
Timesaver speed belt sander, model 750-3, (sn: 4591) 48" wide belt

178
Belt Sander
Timesaver speed belt sander. Model: TB3252HDA. S/N 67810

179
Belt Sander
Timesaver speed belt sander. Model: TB3252HDA.

180
Pop-up saw
Whirlwind pop up saw with infeed and outfeed, model 212L

181
Pop-up saw
Grutter pop up saw, R.H. with infeed and outfeed

182
Pop-up saw
Whirlwind pop up saw with infeed and outfeed, model 212R

183
Pop-up saw
Irvington Moore pop up saw, L.H.

184
Porter shaper

185
Belt sander
Wysong and Miles 80" x8" belt sander

186
Belt Conveyor
Hytrol 48"x12' belt conveyor. No Belt

186A
Belt Conveyor
Hytrol 48"x12' belt conveyor  No Belt

186B
Belt Conveyor
Hytrol 48"x12' belt conveyor with belt

186C
Belt Conveyor
Hytrol 48"x12' belt conveyor.  No belt

186D
Belt Conveyor
Hytrol 48"x12' belt conveyor has belt

186E
Belt Conveyor
Hytrol 48"x12' belt conveyor has belt

187
Belt conveyor and drive
16'x36" Belt conveyor with drive

188
Belt conveyor and drive
18'x40" Belt conveyor with drive

189
Belt conveyor and drive
20'x36" Belt conveyor with drive. No belt

190
Belt conveyor and drive
20"x4' Belt conveyor with drive

191
Chop Saw System
Chop Saw System includes scanner, chop saws, conveyors, infeed and transfer units as marked

192
Misc. Belts
Lot of Misc. Belts from 12" to 48" as marked in back warehouse

193
Electrical Boxes
Misc. Electrical boxes in warehouse as marked

194
Reserve Air Tank
(2) Reservie Air Tanks

194A
Link Chain
(5) pallets of link chain

195
Gear Motor Drive
20 HP Gear Motor Drive

196
Motor
40 HP motor

197
Motor
60 HP motor

198
Motor
15 HP motor

199
Motor
125 HP motor

200
Motor
Meg 20 HP motor

200A
Motor
20 HP motor

200B
Gear Motor Drive

201
Motor
75 HP motor

202
Motor
20 HP motor

203
Motor
20 HP motor

204
Drive

205
Soft start
Cutler hammer s801T18N3S 125 HP soft start with disconnect.

206
Soft start
Allen Bradley 150-A240NBD 75 HP starter 200amp disconnect

207
Siemens soft start
Siemens 3TF50 50HP soft start with disconnect

300
Open Top Trailer
Johnson Trailer Company 1975 38' steel open top trailer. NO TITLE (sn: 22-75-25-434)

302
Skid Steer Quick attach forks
Skid Steer quick attach 4' forks

303
Shop built attachment

Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend






Other Sales by
This Company

Jan 1
Des Arc, AR


Oct 1
Middlebury, IN



Sponsored Links

Virginia- 2 Real Estates and Equipment

Bright Star Realty and Auctions, INC

Bright Star Realty and Auctions, INC


Contact: Loren Beachy
Phone: 574-825-0704
Sale Location
507 N. West Avenue
Blackstone, VA 23824
Sale Dates and Times
Tuesday Dec 15, 2020 Completed
Sale Terms and Conditions
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.


“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.


 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  1. Auction Conducted in the State of Indiana.
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
    1. Online Bids. Online bids may not be reduced or retracted.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  1.  
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Listing Details
Oak Valley Hardwoods at Blackstone, VA.


32.5 acres of land to include: Irregular shaped brick and block construction with concrete floor. Steel truss roof supports with newly replaced roof in fall of 2003. Approximately 61,250 sq. ft., includes finished office space, restrooms, and manufacturing area. SHED OVER GRADING LINE to include 35'x180' (6300 qu.ft) wooden columns with wood trusses, metal roof, concrete floor and apron. 35'x50' (1,750 sq. ft.) section has metal skin on 4 sides (Permanent). GRADING BUILDING: 35'x50' (1750 sq.ft.). SORTING BUILDING 135'x30' (4,050 sq.ft.). Wood column and wood truss with metal walls and roof, 1 side of green chain has siding, has 35'x150' concrete apron (5250 sq. ft.). IRVINGTON MOORE DRY KILNS: (1987-1989 with repairs in 2005) . Kiln #1: 80,000 board feet, 35'Lx 80' W x 30' H. Kiln #2: 30,000 board feet, 40' L x40' W x30' H. Kiln # 3: 30,000 board feet, 40' L x40' W x30' H. Kiln #4: 50,000 board feet, 40' L x45' W x30' H. Kiln #5-9: 75,000 board feet each. 40' L x 62'2" W x30' H. Each has 6' concrete block and brick construction with prefabricated metal roof and aluminum doors. Lignomat controls (computerized). Irvington Moore original controls. Includes Cutler Hammer 200 amp disconnect, 5 KVA transformer, Cutler Hammer 100 amp disconnect, (5) 60 amp disconnects, (6) 30 amp disconnects.

Real Estate at 9 am. Online and in person bidding accepted followed by catalog equipment lots. 

If you have any questions, please call Zach Kittrell at 931-224-0699 or email at zkittrell@aol.com
 

1
REAL ESTATE 32.5 acres of land
32.5 acres of land to include: Irregular shaped brick and block construction with concrete floor. Steel truss roof supports with newly replaced roof in fall of 2003. Approximately 61,250 sq. ft., includes finished office space, restrooms, and manufacturing area. SHED OVER GRADING LINE to include 35'x180' (6300 sq.ft) wooden columns with wood trusses, metal roof, concrete floor and apron. 35'x50' (1,750 sq. ft.) section has metal skin on 4 sides (Permanent). GRADING BUILDING: 35'x50' (1750 sq.ft.). SORTING BUILDING 135'x30' (4,050 sq.ft.). Wood column and wood truss with metal walls and roof, 1 side of green chain has siding, has 35'x150' concrete apron (5250 sq. ft.). IRVINGTON MOORE DRY KILNS: (1987-1989 with repairs in 2005) . Kiln #1: 80,000 board feet, 35'Lx 80' W x 30' H. Kiln #2: 30,000 board feet, 40' L x40' W x30' H. Kiln # 3: 30,000 board feet, 40' L x40' W x30' H. Kiln #4: 50,000 board feet, 40' L x45' W x30' H. Kiln #5-9: 75,000 board feet each. 40' L x 62'2" W x30' H. Each has 6' concrete block and brick construction with prefabricated metal roof and aluminum doors. Lignomat controls (computerized). Irvington Moore original controls. Includes Cutler Hammmer 200 amp disconnect, 5 KVA transformer, Cutler Hammer 100 amp disconnect, (5) 60 amp disconnects, (6) 30 amp disconnects. NOTE: This is the only lot in the auction that is offered with a reserve. It is a very low reserve, so be sure to make arrangements to bid! SELLER WILL FURNISH CLEAR TITLE VIA WARRANTY DEED. 

2
Kenbridge Commercial Real Estate
 21.6 acres and improvements selling without reserve!
Main building is 17,300 square feet approximately
Property also includes numerous smaller buildings including an office building Large industrial property selling absolute! Public is welcome to inspect the property during daylight hours. Please be cautious- anyone entering the property does so at their own risk and assumes all liability. Ten percent of purchase price down day of auction (nonrefundable). Balance due at closing in approximately 60 days. Ten percent buyer's premium will be added to the winning bid to determine purchase price. Seller will furnish clear title via warranty deed.

5
Strapping tool
Fromm P331 strapping tool

6
strapping cart

7
Strapping cart and tools

8
Pallet
Pallet of 1" plastic strap

9
plastic strap
rolls of plastic strapping

10
Barrels of Lumber Marker
(4) 55 gallon barrels of lumber marker. Dark forest green (new) still wrapped in pallet

11
Pedestal fans
(3) Pedestal fans

12
Wall Mounted Fans
(50 Wall Mounted Fans

13
Factory Floats
(9) factory floats

14
Step Ladders

15
Tool Station
Tool station mounted on steel frame, Miller Dial Arc 205 AC/DC welder, tool box with contents, and torch set.

16
Contents of room
Contents of room to include but not limited to drives, 2 steel work tables, bolt bin, shelves with parts as marked

17
Air Compressor
10 HP Tank mount air compressor with controls as marked

18
Hand tools
Lot of hand tools

19
Misc. in room
Misc. in corner of room to include (7) 21" saw blades, control boxes, and mystery box

20
Saw Blades
Lot of misc. saw blades on wall in office

21
Contents of office
Contents of office: (4) microwaves, refrigerator, window AC, tables, and desk

22
Lugged Chain
2 pallets of 81X lugged chain

23
Fan blade
72" fan blade

24
Welder
Lincoln Ideal Arc 250 welder

25
Lockers and Contents
Lockers and contents

26
Drill Press
Akins Precision drill press

27
Stencil cutting machine
Diagraph stencil cutting machine

28
Dual Bench Grinder

29
Contents of rooms not all ready sold
Contents of (3) rooms not already sold as marked

80
Stacking sticks
100 bundles of 6' stacking sticks
 

81
Bunk Dividers
Several 4x4 bunk dividers

90
Lumber
Several bundles of lumber.

100
Lumber Breakdown System
Lumber Breakdown System, 6' 3 arm 25'x11' 3 strand package deck, H-78 chain, 16'x12' transfer deck with 81x lugged chain, 22'x12" stick removal belt conveyor, all drives. No motor controls. First lot of an entirety.

101
Stick Stacking System
Automatic stick stacking system with sling type bin. Controls attached.

102
Lumber Transfer Deck
27'x12' 4 strand lumber transfer deck with Cleveland gear reduction drive

103
Lumber Transfer Deck
5' x13' lumber transfer to feed trimmer with C55B rooftop chain and gear reduction

104
Multi Saw Trimmer
Newman KNO Wheel lift multi saw trimmer. They were using it as 14' trim saw with 1' saw but will pass 20' lumber includes controls attached and belt block conveyor under trimmer

105
Lumber Outfeed Conveyor
6' Lumber outfeed conveyor with 81X chain, (7) 5'x6" even ender rolls and gear motor drive

106
Sorting Deck
80'x10'6" Sorting deck; 4 strand. 1 strand C55D roof top chain, (3) strands C55 chain, gear reduction drive

107
Motor Control Panel
Motor control center with 150 amp switch, starters and controllers

108
Trim Saw Blades
(13) 24" Trim saw blades on wall

109
Tie Back
Items 100-108 tied together with 10% raise

110
Lumber Rack
8'x9' Double Racking Lumber Rack

110A
Lumber Cart

110B
Lumber Rack
8'x9' Double Racking Lumber Rack

110C
Lumber Rack
8'x9' Double Racking Lumber Rack

110D
Lumber Rack
8'x9' Double Racking Lumber Rack

110E
Lumber Rack
8'x9' Double Racking Lumber Rack

110F
Lumber Rack
8x12' Double Racking Lumber Rack

110G
Lumber Rack
8x12' Double Racking Lumber Rack

110H
Lumber Rack
8x12' Double Racking Lumber Rack

110I
Lumber Rack
8x12' Double Racking Lumber Rack

110J
Lumber Rack
8x12' Double Racking Lumber Rack

110K
Lumber Rack
8x12' Double Racking Lumber Rack

110L
Lumber Cart
4'x10' Lumber Cart

110M
Lumber Cart
4'x15' Lumber Cart

110N
Lumber Cart
4'x11' Lumber Cart

110O
Lumber Cart
4'x6' Lumber Cart

110P
Lumber Cart
4'x10' Lumber Cart

110Q
Steel rack
4'x12' Steel Rack

110R
Lumber Cart
4'x8' steel rack

110S
Lumber Cart
4'x6' Lumber Cart

111
Switch
60 amp switch, 200 amp switch

112
Switch
GE 400 amp switch

113
motor controls
(4) GE motor controls

114
Control Panel
Control Panel with 200 amp, 100 amp switches, Allen Bradley Size 3 starters, Eaton motor control

115
Blower
New York Blower Company Size 224 LS shop#P02836 100 with 20 HP motor

116
Blower Stand
Blower stand

116A
Straight Line Rip Saw
Diehl SL52 Straight line Rip Saw (sn: 73M-3262-2498)

116B
Roll case
8'x8" Infeed roll case

116C
Steel table
42"x20" steel table

116d
outfeed
Indexing outfeed

117
Break Down System
6' 4 Arm tilting break down system, 20'x12" wide package deck with 81X chain, Tulsa winch drive, 22'x12" stick removal belt conveyor with drive

118
Stick Stacking System
Automatic stick stacking system with sling type stacking

119
Transfer Deck
14'x13' wide 5 strand transfer deck with 6' let down arms to planer. No drive, 55 chain

120
Double Surfacer
Newman S282-2 24" wide double surfacer (sn: 14937) 50 HP motor on bottom heard and 60 HP motor on top head, knives, cut quiet helical carbide cutter heads includes Newman control center, 20 HP Hydraulic pack and outfeed press rolls

121
Belt Conveyor
13'x24" Infeed belt conveyor with drive

122
Blower
32" Blower and approx 15 HP motor. No pipe

122A
Blower Stand

123
Air Compressor
Ingersol Rand Air Compressor Model SSR-EP15U (sn: J3395U91R) 15 HP

124
Reserve Air Tank
Reserve air tank

157A
Clean out bucket
clean out bucket

125
Label Printer
Zebra ZT410 Label Printer

126
Paint system and paint
ARO MP 4008 Air operated paint system and paint

127
Motor control center
Ge 100 amp motor control center

128
steel rack
4'x8' steel rack

129
steel rack
steel roll around rack 40"x8'

129A
steel rack
4'x8' steel rack

130
Hog and Hopper
Williams 32"x34" Hog with 75 HP motor (sn: 14604) and a hopper. No motor controls

131
Belt Conveyor
50'x24" Belt conveyor with motor and drive

132
Blower
Carolina size 50-6 (sn: 5093) blower with 50 HP motor No controls

133
Control Panel
Control Panel: 200 amp switch for Danfuss Compact Starter MCD202, 150 amp switch for Danfuss Compact starter MCD 202, VLT micro drive. No wire or conduit

134
Control Panel

135
Switch
GE 400 amp switch

136
Dust Pipe
Outfeed dust pipe from Blowers, Planer and Hog

137
Air Compressor
Sullair Air Compressor Model 16-506 (sn: 9109-FLF) 56, 148 hours.

138
Reserve Air Tank
Reserve air tank

139
Air Dryer

140
Sticker Stacking System
Complete 6' blade sticker stacking system to include but not limited to 25'x10' 3 strand package deck, 814 chain falk gear motor drive. First lot of an entirety.

141
Waterfan Unscrambler
HE Wilson 6' 4 Chain Waterfall Unscrambler 814 chain and Scymco drive

142
Transfer Deck
18'x 12'6" transfer deck with C55B roof top chain and drive

143
Sticker Stacking System
6' 5 Arm Blade sticking stacker system, controls as marked, above ground elevator let down 17 rollcase with (7) 6"x6' live rolls. Includes gear motor drive operated.

144
Gravity Rollcase
25' Gravity Rollcase (10) 6"x6' Rolls

145
Cat Walk and Stairs
Catwalk and stairs

146
Tie Back
Items 140-144 tied back together with a 10% raise

147
Air Compressor
2018 Garden Denver 15 HP tank mount air compressor (sn: D180163)

148
Torpedo heater
Master Torpedo Heater

149
Fan
(4) fans mounted on wall

150
Motor Control Panel
Allen Bradley motor control panel

151
Size 3 Starter
Allen Bradley size 3 starter

152
Anchor seal and pump
Barrel of anchor seal and pump

153
Zebra Printer
Zebra 21410 printer

154
Closet and contents
closet and contents to include refrigerator

155
Lumber Dip Tank
6x20' Lumber Dip Tank outside with dimensions of tank being 6'6" x 20'6". Hydraulic lift

301
Flat Bed for Truck

155A
Fuel tank
4' diameter by 6' fuel tank

155B
fuel pump
Electric fuel pump

155c
steel stand
7'x5' steel stand

155D
steel rack
7'x5' steel stand

155E
Concrete containment bins
(2) 5'x8'6"x30" deep concrete containment bins

155F
Control Panel

156
Clean out bucket

156A
Clean up bin
8'x8'x4' deep clean up bin

157
Stick racks
stick racks

158
Cyclone
5' cyclone with star feeder and misc. pipe

159
Fuel tank and concrete containment bin

159A
Trash bin

160
Dust Silo
18' diameter x 32' tall Dust Silo. Bolt together with unloader includes cyclone on top. No dust pipe. 1st lot of an entirety

161
Elevator Dust Loading System
Silver Sweet Elevator dust loading system. Model Queen (sn: 139377) with controls. Is approx. 50' tall.

162
Dust Loading System
Dust loading system with auger dust removal conveyor

163
Dust house with stand
10' Diameter Carter Day dust house with stand and star feeder and auger to dust house

163A
Bag house system and stand
Carter Bag house system with stand 10' diameter

164
Cyclone
Approx 10' Cyclone with stand and star feeder

165
Blower
Carolina Blower Model 45-6 (sn: 5274) with 20 hp motor. Transition pipe only.

166
Dust Pipe
All dust pipe connect to dust system in and outfeed

167
Belt Conveyor
60'x16" belt conveyor with supports covered with drive

168
Entirety COMPLETE DUST SYSTEM
ITEMS 160 THRU 167 TIED TOGETHER WITH 10% RAISE

170
Molder
Weinig Unimat 17A molder, 5 spindles with electrical control panel

170A
Profile grinder
Weinig Rondamat 931 profile grinder

170B
Molder heads
Lot of heads for wieng molder

170C
Profile knives
Lot of profile knive for wieng molder

170D
Blades for rip saw

170E
Trimmer blades
Lot of trimmer blades

170F
Bench grinder

171
Gang Rip Saw
Mereen Johnson 419-DCS (sn: MJ-3297) Gang Rip Saw;21" with 12' infeed table

172
Surfacer
Whitney model 97, 40" surfacer, top 50 hp, bottom 30 hp (sn: 16062) with infeed conveyor and steel landing table

173
Belt Conveyor
13'x44" belt conveyor with drive

174
Planer
Oliver Strato-O-Planer Model 170 E (sn: (89442)

175
Double End Trimmer
Greenlee Double End Tennon Machine Model 542 shop# 613-28

176
Straight Line Rip Saw
Mattison 404 Straight line rip saw chain is not 95% maybe 20% sorry for the misinformation 

177
Belt Sander
Timesaver speed belt sander, model 750-3, (sn: 4591) 48" wide belt

178
Belt Sander
Timesaver speed belt sander. Model: TB3252HDA. S/N 67810

179
Belt Sander
Timesaver speed belt sander. Model: TB3252HDA.

180
Pop-up saw
Whirlwind pop up saw with infeed and outfeed, model 212L

181
Pop-up saw
Grutter pop up saw, R.H. with infeed and outfeed

182
Pop-up saw
Whirlwind pop up saw with infeed and outfeed, model 212R

183
Pop-up saw
Irvington Moore pop up saw, L.H.

184
Porter shaper

185
Belt sander
Wysong and Miles 80" x8" belt sander

186
Belt Conveyor
Hytrol 48"x12' belt conveyor. No Belt

186A
Belt Conveyor
Hytrol 48"x12' belt conveyor  No Belt

186B
Belt Conveyor
Hytrol 48"x12' belt conveyor with belt

186C
Belt Conveyor
Hytrol 48"x12' belt conveyor.  No belt

186D
Belt Conveyor
Hytrol 48"x12' belt conveyor has belt

186E
Belt Conveyor
Hytrol 48"x12' belt conveyor has belt

187
Belt conveyor and drive
16'x36" Belt conveyor with drive

188
Belt conveyor and drive
18'x40" Belt conveyor with drive

189
Belt conveyor and drive
20'x36" Belt conveyor with drive. No belt

190
Belt conveyor and drive
20"x4' Belt conveyor with drive

191
Chop Saw System
Chop Saw System includes scanner, chop saws, conveyors, infeed and transfer units as marked

192
Misc. Belts
Lot of Misc. Belts from 12" to 48" as marked in back warehouse

193
Electrical Boxes
Misc. Electrical boxes in warehouse as marked

194
Reserve Air Tank
(2) Reservie Air Tanks

194A
Link Chain
(5) pallets of link chain

195
Gear Motor Drive
20 HP Gear Motor Drive

196
Motor
40 HP motor

197
Motor
60 HP motor

198
Motor
15 HP motor

199
Motor
125 HP motor

200
Motor
Meg 20 HP motor

200A
Motor
20 HP motor

200B
Gear Motor Drive

201
Motor
75 HP motor

202
Motor
20 HP motor

203
Motor
20 HP motor

204
Drive

205
Soft start
Cutler hammer s801T18N3S 125 HP soft start with disconnect.

206
Soft start
Allen Bradley 150-A240NBD 75 HP starter 200amp disconnect

207
Siemens soft start
Siemens 3TF50 50HP soft start with disconnect

300
Open Top Trailer
Johnson Trailer Company 1975 38' steel open top trailer. NO TITLE (sn: 22-75-25-434)

302
Skid Steer Quick attach forks
Skid Steer quick attach 4' forks

303
Shop built attachment

Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Virginia- 2 Real Estates and Equipment
 Live Auction
 
Auction Date(s)
Tuesday Dec 15, 2020 Completed
Auction Location

Blackstone, VA 23824
Company
Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
 
  1. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
  1. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded, where required, as follows:
IN, IL , WI , KY , OH , VA , AR , NY, NC, TN, MO .
 
  1. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected and where a Buyer may pick up Personal Property.

“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.

“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.

“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property or of each parcel of Real Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property or with respect to each parcel of Real Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. For Real Property offered Subject to Seller’s Confirmation, the Buyer’s Premium will be calculated on the amount of the High Bid Subject to Confirmation.

“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property or Real Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.

“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.

“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot or on a parcel of Real Property.

“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on Real Property put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.


“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot or a parcel of Real Property.

"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.

“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.

“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.

“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.

“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.

"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.

“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.

“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).

“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms- length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.

“Property” means the Real Property and the Personal Property.

“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction.

“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.

“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.

“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.

“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.

“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by
Seller).

"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.

“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

“Without Reserve” means Absolute.


 
  1. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.
  1. Auction Conducted in the State of Indiana.
    1. For Auctions in the State of Indiana and Online. All Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are entered into in the State of Indiana, all bids and payments are received in the State of Indiana, and the Realty Purchase Agreement, if any, will be formed and entered into in the State of Indiana.
    2. For Auctions outside of the State of Indiana. All Property is offered for sale in the state of the Auction Site, and will be sold in the state of the Auction Site. Notwithstanding the physical location of any Bidder or any Participant, these Terms are entered into in the state of the Auction Site, all bids and payments are received in the state of the Auction Site, and the Realty Purchase Agreement, if any, will be formed and entered into in the state of the Auction Site.
  1. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.

The Buyer’s Premium for Personal Property will be amount equal to thirteen percent ( 13%) of the Hammer Price for each Lot Knocked Down at the Auction.

The Buyer’s Premium for Real Property will be amount equal to percent ( %) of the Hammer Price for each parcel of Real Property Knocked Down at the Auction.

 
  1. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
  2. Nature of the Auction.

X The Auction for the Personal Property is an Absolute Auction.

The Auction for the Personal Property is With Reserve. Auctioneer may Withdraw any Lot offered With Reserve prior to the Fall of the Hammer.

 
  1. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
  1. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
  1. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
    1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
    1. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
    1. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
    1. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
    1. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
    1. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
    1. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
    1. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.
    1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties,
(i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
 
    1. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
    1. No Reduction or Retraction of Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
    1. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
    1. Online Bids. Online bids may not be reduced or retracted.
  1. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). Absentee Bids may be initiated and advances in accordance with Auctioneer’s policies and procedures. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
  1. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
  1. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
  1.  
  1. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
  1. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot or item of Personal Property or each parcel of Real Property will be the Buyer of such Property.
  1. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
  1. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
  1. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
  1. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or
representation by Auctioneer
 
  1. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
  1.  
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
 
  1. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ring man, or multiple bid assistants or ring men, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
  1. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the

vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
 
  1. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
  1. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked- Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
  1. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases must be paid for within five (5) days after the close of the Auction. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.
  1. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Disassembly and removal shall be done in a workmanlike manner, and each Buyer shall indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer's employees, agents, representatives, or independent contractors, in connection with the disassembly or removal of any Personal Property. Any and all damages to the Auction Site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller.
  1. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them.
  1. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
  1. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
  1. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
  1. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.




 
  1. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled
to specific performance or other equitable relief.
 
  1. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
  1. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
  1. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
  1. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
  1. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
  1. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim, suit or cause of action relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
  1. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their respective rights hereunder.

Oak Valley Hardwoods at Blackstone, VA.


32.5 acres of land to include: Irregular shaped brick and block construction with concrete floor. Steel truss roof supports with newly replaced roof in fall of 2003. Approximately 61,250 sq. ft., includes finished office space, restrooms, and manufacturing area. SHED OVER GRADING LINE to include 35'x180' (6300 qu.ft) wooden columns with wood trusses, metal roof, concrete floor and apron. 35'x50' (1,750 sq. ft.) section has metal skin on 4 sides (Permanent). GRADING BUILDING: 35'x50' (1750 sq.ft.). SORTING BUILDING 135'x30' (4,050 sq.ft.). Wood column and wood truss with metal walls and roof, 1 side of green chain has siding, has 35'x150' concrete apron (5250 sq. ft.). IRVINGTON MOORE DRY KILNS: (1987-1989 with repairs in 2005) . Kiln #1: 80,000 board feet, 35'Lx 80' W x 30' H. Kiln #2: 30,000 board feet, 40' L x40' W x30' H. Kiln # 3: 30,000 board feet, 40' L x40' W x30' H. Kiln #4: 50,000 board feet, 40' L x45' W x30' H. Kiln #5-9: 75,000 board feet each. 40' L x 62'2" W x30' H. Each has 6' concrete block and brick construction with prefabricated metal roof and aluminum doors. Lignomat controls (computerized). Irvington Moore original controls. Includes Cutler Hammer 200 amp disconnect, 5 KVA transformer, Cutler Hammer 100 amp disconnect, (5) 60 amp disconnects, (6) 30 amp disconnects.

Real Estate at 9 am. Online and in person bidding accepted followed by catalog equipment lots. 

If you have any questions, please call Zach Kittrell at 931-224-0699 or email at zkittrell@aol.com
 

1
REAL ESTATE 32.5 acres of land
32.5 acres of land to include: Irregular shaped brick and block construction with concrete floor. Steel truss roof supports with newly replaced roof in fall of 2003. Approximately 61,250 sq. ft., includes finished office space, restrooms, and manufacturing area. SHED OVER GRADING LINE to include 35'x180' (6300 sq.ft) wooden columns with wood trusses, metal roof, concrete floor and apron. 35'x50' (1,750 sq. ft.) section has metal skin on 4 sides (Permanent). GRADING BUILDING: 35'x50' (1750 sq.ft.). SORTING BUILDING 135'x30' (4,050 sq.ft.). Wood column and wood truss with metal walls and roof, 1 side of green chain has siding, has 35'x150' concrete apron (5250 sq. ft.). IRVINGTON MOORE DRY KILNS: (1987-1989 with repairs in 2005) . Kiln #1: 80,000 board feet, 35'Lx 80' W x 30' H. Kiln #2: 30,000 board feet, 40' L x40' W x30' H. Kiln # 3: 30,000 board feet, 40' L x40' W x30' H. Kiln #4: 50,000 board feet, 40' L x45' W x30' H. Kiln #5-9: 75,000 board feet each. 40' L x 62'2" W x30' H. Each has 6' concrete block and brick construction with prefabricated metal roof and aluminum doors. Lignomat controls (computerized). Irvington Moore original controls. Includes Cutler Hammmer 200 amp disconnect, 5 KVA transformer, Cutler Hammer 100 amp disconnect, (5) 60 amp disconnects, (6) 30 amp disconnects. NOTE: This is the only lot in the auction that is offered with a reserve. It is a very low reserve, so be sure to make arrangements to bid! SELLER WILL FURNISH CLEAR TITLE VIA WARRANTY DEED. 

2
Kenbridge Commercial Real Estate
 21.6 acres and improvements selling without reserve!
Main building is 17,300 square feet approximately
Property also includes numerous smaller buildings including an office building Large industrial property selling absolute! Public is welcome to inspect the property during daylight hours. Please be cautious- anyone entering the property does so at their own risk and assumes all liability. Ten percent of purchase price down day of auction (nonrefundable). Balance due at closing in approximately 60 days. Ten percent buyer's premium will be added to the winning bid to determine purchase price. Seller will furnish clear title via warranty deed.

5
Strapping tool
Fromm P331 strapping tool

6
strapping cart

7
Strapping cart and tools

8
Pallet
Pallet of 1" plastic strap

9
plastic strap
rolls of plastic strapping

10
Barrels of Lumber Marker
(4) 55 gallon barrels of lumber marker. Dark forest green (new) still wrapped in pallet

11
Pedestal fans
(3) Pedestal fans

12
Wall Mounted Fans
(50 Wall Mounted Fans

13
Factory Floats
(9) factory floats

14
Step Ladders

15
Tool Station
Tool station mounted on steel frame, Miller Dial Arc 205 AC/DC welder, tool box with contents, and torch set.

16
Contents of room
Contents of room to include but not limited to drives, 2 steel work tables, bolt bin, shelves with parts as marked

17
Air Compressor
10 HP Tank mount air compressor with controls as marked

18
Hand tools
Lot of hand tools

19
Misc. in room
Misc. in corner of room to include (7) 21" saw blades, control boxes, and mystery box

20
Saw Blades
Lot of misc. saw blades on wall in office

21
Contents of office
Contents of office: (4) microwaves, refrigerator, window AC, tables, and desk

22
Lugged Chain
2 pallets of 81X lugged chain

23
Fan blade
72" fan blade

24
Welder
Lincoln Ideal Arc 250 welder

25
Lockers and Contents
Lockers and contents

26
Drill Press
Akins Precision drill press

27
Stencil cutting machine
Diagraph stencil cutting machine

28
Dual Bench Grinder

29
Contents of rooms not all ready sold
Contents of (3) rooms not already sold as marked

80
Stacking sticks
100 bundles of 6' stacking sticks
 

81
Bunk Dividers
Several 4x4 bunk dividers

90
Lumber
Several bundles of lumber.

100
Lumber Breakdown System
Lumber Breakdown System, 6' 3 arm 25'x11' 3 strand package deck, H-78 chain, 16'x12' transfer deck with 81x lugged chain, 22'x12" stick removal belt conveyor, all drives. No motor controls. First lot of an entirety.

101
Stick Stacking System
Automatic stick stacking system with sling type bin. Controls attached.

102
Lumber Transfer Deck
27'x12' 4 strand lumber transfer deck with Cleveland gear reduction drive

103
Lumber Transfer Deck
5' x13' lumber transfer to feed trimmer with C55B rooftop chain and gear reduction

104
Multi Saw Trimmer
Newman KNO Wheel lift multi saw trimmer. They were using it as 14' trim saw with 1' saw but will pass 20' lumber includes controls attached and belt block conveyor under trimmer

105
Lumber Outfeed Conveyor
6' Lumber outfeed conveyor with 81X chain, (7) 5'x6" even ender rolls and gear motor drive

106
Sorting Deck
80'x10'6" Sorting deck; 4 strand. 1 strand C55D roof top chain, (3) strands C55 chain, gear reduction drive

107
Motor Control Panel
Motor control center with 150 amp switch, starters and controllers

108
Trim Saw Blades
(13) 24" Trim saw blades on wall

109
Tie Back
Items 100-108 tied together with 10% raise

110
Lumber Rack
8'x9' Double Racking Lumber Rack

110A
Lumber Cart

110B
Lumber Rack
8'x9' Double Racking Lumber Rack

110C
Lumber Rack
8'x9' Double Racking Lumber Rack

110D
Lumber Rack
8'x9' Double Racking Lumber Rack

110E
Lumber Rack
8'x9' Double Racking Lumber Rack

110F
Lumber Rack
8x12' Double Racking Lumber Rack

110G
Lumber Rack
8x12' Double Racking Lumber Rack

110H
Lumber Rack
8x12' Double Racking Lumber Rack

110I
Lumber Rack
8x12' Double Racking Lumber Rack

110J
Lumber Rack
8x12' Double Racking Lumber Rack

110K
Lumber Rack
8x12' Double Racking Lumber Rack

110L
Lumber Cart
4'x10' Lumber Cart

110M
Lumber Cart
4'x15' Lumber Cart

110N
Lumber Cart
4'x11' Lumber Cart

110O
Lumber Cart
4'x6' Lumber Cart

110P
Lumber Cart
4'x10' Lumber Cart

110Q
Steel rack
4'x12' Steel Rack

110R
Lumber Cart
4'x8' steel rack

110S
Lumber Cart
4'x6' Lumber Cart

111
Switch
60 amp switch, 200 amp switch

112
Switch
GE 400 amp switch

113
motor controls
(4) GE motor controls

114
Control Panel
Control Panel with 200 amp, 100 amp switches, Allen Bradley Size 3 starters, Eaton motor control

115
Blower
New York Blower Company Size 224 LS shop#P02836 100 with 20 HP motor

116
Blower Stand
Blower stand

116A
Straight Line Rip Saw
Diehl SL52 Straight line Rip Saw (sn: 73M-3262-2498)

116B
Roll case
8'x8" Infeed roll case

116C
Steel table
42"x20" steel table

116d
outfeed
Indexing outfeed

117
Break Down System
6' 4 Arm tilting break down system, 20'x12" wide package deck with 81X chain, Tulsa winch drive, 22'x12" stick removal belt conveyor with drive

118
Stick Stacking System
Automatic stick stacking system with sling type stacking

119
Transfer Deck
14'x13' wide 5 strand transfer deck with 6' let down arms to planer. No drive, 55 chain

120
Double Surfacer
Newman S282-2 24" wide double surfacer (sn: 14937) 50 HP motor on bottom heard and 60 HP motor on top head, knives, cut quiet helical carbide cutter heads includes Newman control center, 20 HP Hydraulic pack and outfeed press rolls

121
Belt Conveyor
13'x24" Infeed belt conveyor with drive

122
Blower
32" Blower and approx 15 HP motor. No pipe

122A
Blower Stand

123
Air Compressor
Ingersol Rand Air Compressor Model SSR-EP15U (sn: J3395U91R) 15 HP

124
Reserve Air Tank
Reserve air tank

157A
Clean out bucket
clean out bucket

125
Label Printer
Zebra ZT410 Label Printer

126
Paint system and paint
ARO MP 4008 Air operated paint system and paint

127
Motor control center
Ge 100 amp motor control center

128
steel rack
4'x8' steel rack

129
steel rack
steel roll around rack 40"x8'

129A
steel rack
4'x8' steel rack

130
Hog and Hopper
Williams 32"x34" Hog with 75 HP motor (sn: 14604) and a hopper. No motor controls

131
Belt Conveyor
50'x24" Belt conveyor with motor and drive

132
Blower
Carolina size 50-6 (sn: 5093) blower with 50 HP motor No controls

133
Control Panel
Control Panel: 200 amp switch for Danfuss Compact Starter MCD202, 150 amp switch for Danfuss Compact starter MCD 202, VLT micro drive. No wire or conduit

134
Control Panel

135
Switch
GE 400 amp switch

136
Dust Pipe
Outfeed dust pipe from Blowers, Planer and Hog

137
Air Compressor
Sullair Air Compressor Model 16-506 (sn: 9109-FLF) 56, 148 hours.

138
Reserve Air Tank
Reserve air tank

139
Air Dryer

140
Sticker Stacking System
Complete 6' blade sticker stacking system to include but not limited to 25'x10' 3 strand package deck, 814 chain falk gear motor drive. First lot of an entirety.

141
Waterfan Unscrambler
HE Wilson 6' 4 Chain Waterfall Unscrambler 814 chain and Scymco drive

142
Transfer Deck
18'x 12'6" transfer deck with C55B roof top chain and drive

143
Sticker Stacking System
6' 5 Arm Blade sticking stacker system, controls as marked, above ground elevator let down 17 rollcase with (7) 6"x6' live rolls. Includes gear motor drive operated.

144
Gravity Rollcase
25' Gravity Rollcase (10) 6"x6' Rolls

145
Cat Walk and Stairs
Catwalk and stairs

146
Tie Back
Items 140-144 tied back together with a 10% raise

147
Air Compressor
2018 Garden Denver 15 HP tank mount air compressor (sn: D180163)

148
Torpedo heater
Master Torpedo Heater

149
Fan
(4) fans mounted on wall

150
Motor Control Panel
Allen Bradley motor control panel

151
Size 3 Starter
Allen Bradley size 3 starter

152
Anchor seal and pump
Barrel of anchor seal and pump

153
Zebra Printer
Zebra 21410 printer

154
Closet and contents
closet and contents to include refrigerator

155
Lumber Dip Tank
6x20' Lumber Dip Tank outside with dimensions of tank being 6'6" x 20'6". Hydraulic lift

301
Flat Bed for Truck

155A
Fuel tank
4' diameter by 6' fuel tank

155B
fuel pump
Electric fuel pump

155c
steel stand
7'x5' steel stand

155D
steel rack
7'x5' steel stand

155E
Concrete containment bins
(2) 5'x8'6"x30" deep concrete containment bins

155F
Control Panel

156
Clean out bucket

156A
Clean up bin
8'x8'x4' deep clean up bin

157
Stick racks
stick racks

158
Cyclone
5' cyclone with star feeder and misc. pipe

159
Fuel tank and concrete containment bin

159A
Trash bin

160
Dust Silo
18' diameter x 32' tall Dust Silo. Bolt together with unloader includes cyclone on top. No dust pipe. 1st lot of an entirety

161
Elevator Dust Loading System
Silver Sweet Elevator dust loading system. Model Queen (sn: 139377) with controls. Is approx. 50' tall.

162
Dust Loading System
Dust loading system with auger dust removal conveyor

163
Dust house with stand
10' Diameter Carter Day dust house with stand and star feeder and auger to dust house

163A
Bag house system and stand
Carter Bag house system with stand 10' diameter

164
Cyclone
Approx 10' Cyclone with stand and star feeder

165
Blower
Carolina Blower Model 45-6 (sn: 5274) with 20 hp motor. Transition pipe only.

166
Dust Pipe
All dust pipe connect to dust system in and outfeed

167
Belt Conveyor
60'x16" belt conveyor with supports covered with drive

168
Entirety COMPLETE DUST SYSTEM
ITEMS 160 THRU 167 TIED TOGETHER WITH 10% RAISE

170
Molder
Weinig Unimat 17A molder, 5 spindles with electrical control panel

170A
Profile grinder
Weinig Rondamat 931 profile grinder

170B
Molder heads
Lot of heads for wieng molder

170C
Profile knives
Lot of profile knive for wieng molder

170D
Blades for rip saw

170E
Trimmer blades
Lot of trimmer blades

170F
Bench grinder

171
Gang Rip Saw
Mereen Johnson 419-DCS (sn: MJ-3297) Gang Rip Saw;21" with 12' infeed table

172
Surfacer
Whitney model 97, 40" surfacer, top 50 hp, bottom 30 hp (sn: 16062) with infeed conveyor and steel landing table

173
Belt Conveyor
13'x44" belt conveyor with drive

174
Planer
Oliver Strato-O-Planer Model 170 E (sn: (89442)

175
Double End Trimmer
Greenlee Double End Tennon Machine Model 542 shop# 613-28

176
Straight Line Rip Saw
Mattison 404 Straight line rip saw chain is not 95% maybe 20% sorry for the misinformation 

177
Belt Sander
Timesaver speed belt sander, model 750-3, (sn: 4591) 48" wide belt

178
Belt Sander
Timesaver speed belt sander. Model: TB3252HDA. S/N 67810

179
Belt Sander
Timesaver speed belt sander. Model: TB3252HDA.

180
Pop-up saw
Whirlwind pop up saw with infeed and outfeed, model 212L

181
Pop-up saw
Grutter pop up saw, R.H. with infeed and outfeed

182
Pop-up saw
Whirlwind pop up saw with infeed and outfeed, model 212R

183
Pop-up saw
Irvington Moore pop up saw, L.H.

184
Porter shaper

185
Belt sander
Wysong and Miles 80" x8" belt sander

186
Belt Conveyor
Hytrol 48"x12' belt conveyor. No Belt

186A
Belt Conveyor
Hytrol 48"x12' belt conveyor  No Belt

186B
Belt Conveyor
Hytrol 48"x12' belt conveyor with belt

186C
Belt Conveyor
Hytrol 48"x12' belt conveyor.  No belt

186D
Belt Conveyor
Hytrol 48"x12' belt conveyor has belt

186E
Belt Conveyor
Hytrol 48"x12' belt conveyor has belt

187
Belt conveyor and drive
16'x36" Belt conveyor with drive

188
Belt conveyor and drive
18'x40" Belt conveyor with drive

189
Belt conveyor and drive
20'x36" Belt conveyor with drive. No belt

190
Belt conveyor and drive
20"x4' Belt conveyor with drive

191
Chop Saw System
Chop Saw System includes scanner, chop saws, conveyors, infeed and transfer units as marked

192
Misc. Belts
Lot of Misc. Belts from 12" to 48" as marked in back warehouse

193
Electrical Boxes
Misc. Electrical boxes in warehouse as marked

194
Reserve Air Tank
(2) Reservie Air Tanks

194A
Link Chain
(5) pallets of link chain

195
Gear Motor Drive
20 HP Gear Motor Drive

196
Motor
40 HP motor

197
Motor
60 HP motor

198
Motor
15 HP motor

199
Motor
125 HP motor

200
Motor
Meg 20 HP motor

200A
Motor
20 HP motor

200B
Gear Motor Drive

201
Motor
75 HP motor

202
Motor
20 HP motor

203
Motor
20 HP motor

204
Drive

205
Soft start
Cutler hammer s801T18N3S 125 HP soft start with disconnect.

206
Soft start
Allen Bradley 150-A240NBD 75 HP starter 200amp disconnect

207
Siemens soft start
Siemens 3TF50 50HP soft start with disconnect

300
Open Top Trailer
Johnson Trailer Company 1975 38' steel open top trailer. NO TITLE (sn: 22-75-25-434)

302
Skid Steer Quick attach forks
Skid Steer quick attach 4' forks

303
Shop built attachment