00

Information Lot
Welcome to Bill Hanks Lumber Co. Liquidation Auction!


Auction Schedule is as follows:
Announcements begin at 8:45 am EST. All announcements day of sale take precedence over all written advertising.

Lot #1-499 and the lots 1100 of Kiln Dried Rough Sawn Lumber will sell on Thursday, August 15th beginning at 9 am. The lumber lots will be divided into detailed lots selling at the end of day,Thursday.

Lot #500-1099 will be sold on Friday beginning at 9am. August 16th. At NOON, we will begin the ROLLING STOCK regardless of what lot we are on at that time.
Tune in for complete details at 8:45 am on day of sale.


Smalls and palletized items will be given 7 days for removal.  
Majority of Equipment will be given 30 days for removal. The Sorter will be given 60 days for removal.
Real Estate to close in 90 days.


Bill Hanks Lumber equipment was EXTREMELY well maintained. You will understand this when you see the WELL stocked parts rooms (of which will also be sold) As you will see there is fire damage to some of the equipment in the main sawmill building. We did our best to note any fire damage in the descriptions but still encourage you to inspect all equipment yourself. Again this was ONLY in the sawmill building. The debarker line, trimsaw/sorter line, chipper line and ALL the rolling stock was untouched by the fire.
YOU WILL NOT BE DISAPPOINTED IN THE QUALITY HERE!

 

1

Real Estate- Tract 1
26.28 acres approximately. Buyer is to receive title free and clear by warranty deed.
Much of this tract is in hard yard
Currently contains large sawmill buildings which can be purchased separately in the equipment auction
Beautiful office building
Parts building
If Tract 1 is sold separately from Tract 3, Tract 3 will have a 50' easement across Tract 1 on the driveway out to the road.
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE:  Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

2

Real Estate -Tract 2
6.85 acres approximately. Buyer is to receive title free and clear by warranty deed.
Located on both sides of Piney Grove Church Road
Tract 2 would be an excellent addition to any of the other tracts, or can be purchased by itself
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

3

Real Estate- Tract 3
Tract 3
19 acres approximately. Buyer is to receive title free and clear by warranty deed.
Much of this Tract is in hard yard
Sells with approximately 49,000 sf of buildings including
Building 1: 80x120
Building 2: 120x240 main part plus 40x40 bumpout
Building 3: 60x100
Garage: 50x60
This tract also contains the dry kilns and boilers offered in Tracts 4-11 that can be purchased with Tract 3 or purchased separately and removed.
There is an old 30' easement along the east property line from the road to the rear of the property. It appears never to have been used.

PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

4

Converta Kilns #1 & #2
Double Track Feed Through Dry Kiln, Capacity Average 50 MBF Each, Iosvert -130 G2 Plus Variable Feed Controls on Each Kiln, Challenger 63 KVA Transformer, 100 AMP Disconnect for Each Kilns, System Pressure Detector
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

5

Brunner Hildebrand Kilns #3 & #4 50 MBF Each
Double Track, 50 MBF Each, Feed Through Dry Kilns, Added 3 & 4 SII Heat Vent Spray & Fan Controls, Capacity Average 50 MBF Ea. W/ Tosovert 132 G2 Variable Feed Controllers Each W/ TCI Motion Shield Protector, 100 AMP Disconnect for Each Kiln
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

6

SII Package Kilns #5 & #6 90 MBF Each
Job #712, (2) Boxes Approx. 90+ MBF Kiln Capacity, Size Eddie W/ Toshiba G3 Variable Feed Controls W/ SII Controls for Forward/Reverse Heat, Vent, Spray and Fans, Includes 56RS Mistifyer
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

7

English Boiler
Richmond, VA 400 HP 150 PSI Attached Auger Stocker Feed
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

8

Superior Boiler Works 150 PSI Package boiler
4-X1024 w/ updraft or Gi Fan,  w, Lockwood Products recirculating tank with 15 HP Water Reclaim pump
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

9

Allen-Bradley Centerline Control
600 AMP MCC for Water Feed Pumps, Rotary Valves and ID Fan W/ Water Conditioning System, Square D 400 AMP Main
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

10

Boiler Room
40'x60' All Steel Construction, Clear Span-2400 sq. feet; 5"x10" I Beam Steel @walls to 6"x12" I Beam at Ceiling;(2) 12'x12 Metal Panel Doors, Coated Vertical Steel Siding and Coated Steel Roof, Concrete Floor throughout. No Insulation. Electrical for lights as marked
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

11

48 Acres~ Excellent Buildings ~ Dry Kilns~ As an entirety
This lot is an entirety lot that includes lots 1-10. Top-Quality Commercial Property that will sell to the highest bidder without reserve! Make arrangements to inspect this property today!
PLEASE NOTE: FOR REAL ESTATE BUYERS WHO CANNOT BE ONSITE: Real estate portion of auction will be broadcast to viewers via online bidding sites. However, if you wish to bid on the real estate (Lots 1-11) you will need to do so via phone. Your registration on the online bidding sites will suffice, but due to multiple possible combinations, we will need to have you on the phone with one of our staff to place bids. Phone numbers to use:
Zach 931.224.0699
Jackie:931.698.3342
Eugene: 260.350.8953
Jonathon: 574.349.4380
Mel: 574.238.9469

015

12

Pre-Dryer shed
120'x100'x20’ eve height labeled as FAN SHED. All steel construction 6'x12" steel columns at wales to tappered steel roof. Vertical steel conated sideing on each end. Open down sides and dividers for bays (8). Roof is vented down length of peak. (4) Banks of 15 fans down C/L of fan sheet. Finished Break room consisting of 11'x20' all cwood consruction with asphalt shingles

13

T-Shed
32'x160'x30’ eve height "T" shaped, all steel structure. Opened on all sides with gutters, Gavel grade, with concrete runners of ver gravel to support gross outs

14

T-Shed
32'x160'x 30’ eve height "T" shaped, all steel structure. Opened on all sides with gutters, Gavel grade, with concrete runners of ver gravel to support gross outs

15

T-Shed
32'x150'x30’ eve height “T" shaped, all steel structure. Opened on all sides with gutters, Gavel grade, with concrete runners of ver gravel to support gross outs

31

16

T-Shed
32'x155'x30’ eve height "T" shaped, all steel structure. Opened on all sides with gutters, Gavel grade, with concrete runners over gravel to support gross outs

17

Equipment Building
50'x100'x20’ eve height all steel clear span building with 12"x6" I Beam steel columns to tappered steel at roof. Coated steel roof

18

All 4x4x8 Bunk dividers
Several bunk dividers that have been gathered and stacked after use. Ready to load on your truck

19

All 6x6x8' treated post
These post were used to stack the on for air drying.

20

Fairbank 120,000 lb scales
in ground scales with electronic with weightronics digital read out and printer.  

23

Lignomat K Moisture Meter
0 Haus Precision Plus Digital Scales, Sharp Calculator

24

A and D Balance Digital Scales
Model EP-20KA

24A

Lot of Mulligan Engineered Flooring
#1 Common

25

(1) 4-Wheel Cart
4' x 2' W/ Contents

26

(1) 4-Wheel Cart
4' x 2' W/ Contents, Includes New Wire on Shelf in Box

27

Craftsman Cordless Drill Driver
W/ (2) Batteries & (2) Chargers

28

4-Drawer Filing Cabinet, 30 Gal. Trash Can
and 6' Step Ladder, Premier 2-Gallon Metal Garden Sprayer

54

20' x 12" Auger
W/ Gear Motor Drive

29

Fittings for Kilns
(3) Containers

30

SII Kiln Wet Bulb Box of Filter
SII Spray Valve, Seal Rope for Vents

56

Hopper Metering Situation
Auger to English Boiler Stoker

30A

Square D 600 AMP Main for Kilns
Breakers and transformers for Kiln Main Power

32

Speedair Air Compressor
Vertical Tank Mount, 1 HP Model # 3Z423F, Actuate Kilns 1 & 2 Vents

33

(2) Steam Trap Hydrometers
(1) New in Box, Vent Actuator Valves

34

Steel Shelf W/ Misc. Contents
Steel Shelf with contents

35

Wood Cabinet W/ Misc.
Spools of Electrical Wire, Kiln Parts, Soldering Gun, Fasteners, Hand Tools, Compressed Oxygen, Nitrogen, Grease Gun W/ Box of High Heat Grease for Fan Bearings

36

Quality Lab Oven
Model 3

37

Craftsman Shop Vac
6.0 HP, 16 Gallon

38

Keg Welder
Stainless Steel, (2) New Hoses

39

Craftsman Band Saw
14", 1/2 HP

40

Porter Cable 2 HP Portable Air Compressor
155 PSI

41

41 Steam Pipe Gaskets
3/4 to 6" on Wall as Marked

42

Steel Rack W/ Contents
Steel Rack and contents

50

15' x 20" Auger Conveyor
W/ Shaft Mount Reduction Drive & 5 HP Motor, Includes Steel Chute Metering Bin

63

Steel rack and augers
Steel rack with steel bars augers and channel iron

51

200' Concave Belt Conveyor
W/ 24" Belt W/ Weighted Take Up W/ 20 HP Motor, Drive & Steel Supports

52

Brock Silo
W/ Flying Dutchman Silo Unloader, Model 4044, S/N 4885, About 6/7 Trailer Loads of Dust   Silo 21' diameter and 30' side wall

53

20' X 12" Auger w/ gear motor drive
Feed #1 to English Boiler

55

Endwise 65' Concave Belt Conveyor Covered
24" Belt W/ 5 HP Motor & Drive W/ Access Stairs & Catwalk & Steel Supports Covered to Boiler Stoker Feed Auger

59

30 AMP & 60 AMP Motor Control
.

61

14' X 12" Auger Conveyor
with gear motor drive (To Superior Boiler) 

62

30' X 12" Auger Conveyor
Reintroduces fly ash back in to fuel burning system 

65

Fromm P330 Battery Operated Banding system
.

65A

Fromm P330 Battery Operated Banding system
.

65B

Fromm P330 Battery Operated Banding system
.

66

Charger and battery for Fromm Charger
.

66A

Milwaukee Charger and Fromm Battery
.

67

P327 Fromm Battery Opeated Banding Tool
.

67A

P327 Fromm Battery Opeated Banding Tool
.

68

Fromm Battery with Fromm Charger
.

68A

Fromm Charger and two batteries
.

69

Dewalt Battery Operated sawall with charger
.

70

Lincoln Battery operated grease gun with 2 chargers and batteries
.

71

Fromm Manual Banding tool
.

71A

Fromm Manual Banding tool
.

72

Metal tool box and contents, bucket/contents, Coleman cooler
metal tool box wth misc tools, 5 gallon bucket with tools to include banding tools, staplers, hand tools with Coleman water cooler 32'x160' "T" shaped, all steel structure. 

73

3 extension cords
.

74

Strapping Cart
.

74A

Strapping Cart
.

74b

Strapping Cart
.

74C

Strapping Cart
.

74D

Strapping Cart
.

75

Stihl gas powered leaf blower
.

76

stihl chain saw (ms250)
gas powered 

77

(6) microwaves
condition unknown

78

mini frig
 condition unknown

79

Kyrocera K2560 Copier
 condition unknown

80

(7) Heaters
.

81

lot of misc Back up battery, anchors, computer screen
Back up Battery in box, (2) wheels, box of anchors, computer screen, paint 

82

Thermoheat Salamander
Dual heat technology, 100,000 or 125,000 BTU's

83

Reddy Heater Salamander
Pro 155, 155,000 BTU's

84

Master Pro Salamander
215,000 BTU's

85

Dura Heat Salamander
140,000/180,000 BTU's

86

Dura Heat Salamander
50,000 BTU's

87

Mr. Heater Salamander
75,000 BTU's

88

Master Salamander
75,000 BTU's

89

Dayton Salamander
50,000 BTU's

90

Salamander
75,000 BTU's

91

Machine-Dro Electronic Digital Caliper
Part No. PP-ME-01-EN, measuring range 20", looks like new

92

Tools, Carts and Bins
Lots of misc. tools, padlocks etc.

93

Tool Box
Loaded with tools, gloves etc.

94

Porter-Cable Portable Band Saw
.

95

Milwaukee Heavy Duty Rotary Hammer
.

96

Craftsman Hog Nose
.

97

DeWalt 7" Grinder
Heavy duty, brand new

98

DeWalt 7" Grinder
.

99

DeWalt 4 1/2" Grinder
Paddle switch, brand new

100

DeWalt 4 1/2" Grinder
Paddle switch, brand new

100A

DeWalt 4 1/2" Grinders
Paddle switch, total of 2

101

Alemite Grease Guns
1 pistol grip, 1 lever action, brand new

102

Alemite Grease Guns
1 pistol grip, 1 lever action, brand new

103

Fish Tapes
1-240' x 1/8" steel, 1-100' x 3/16" nylon

104

Greenlee 767 Slug Buster Punch Set
6500 PSI max

105

Chain Binder and Chain
Approx. 30'

106

Stihl Weedeater
FS240, works

107

Air Blowers
Total of 12, various lengths

108

Logrite Cant Hooks
total of 3, brand new

109

Axes, Sledges and Handles
2 axes, 2 sledges

110

Raytek Portable Infrared Thermometer
Raynger ST, works

111

Edge Series Regulators and Welding Hose
1/4" x 100'

112

Box of Misc.
5 Easy Heat water pipe freeze protection, 5/8" x 50' garden hose, Loggers first aid kits, butane fuel, and set of wheels

113

Ingersoll Rand Air Wrench
.

114

Ingersoll Rand Air Wrench
.

115

Ingersoll Rand Air Wrench
.

116

Misc. Wrenches and Pipe Wrench
sizes from 1 1/4''-2''

117

2 Hoists
.

118

Irwin 10" Construction Blades
Total of 3

119

H.K. Bolt Cutters
Brand new

120

Rope Ladder and Safety Harness
.

121

Fisher Metal Detector
CZ 3D enhanced

121A

Fisher Metal Detector
CZ 3D enhanced 

121B

Fisher Metal Detector
.

121C

Fisher Metal Detector
.

122

Fiberglass Section For Vibrating Conveyor
5', 24'' pan with 10'' sides

123

Mop and Mop Buckets
.

124

Watlow Screw Plug Heater with Thermostat
3000 W, BLS717E1S2

125

Siphon Drum Pump
Total of 3

126

ACDelco Hydraulic Pump
.

127

Hydraulic Bottle Jack
12 ton

128

Steel Drawer Case
Loaded with metric bolts, nuts, and washers, snap rings, socket head screws, spring pins, heat shrink etc. 

129

Plastic Organizer Bin
Loaded with stainless steel nipples, elbows and tees, various sizes

130

Steel Drawer Case
Loaded with stainless steel bolts and nuts, bits, drill bits, taps, dies, and lots of O-rings

131

Plastic Organizer Bin with some hand tools
.

132

Zebra Labeler and Allegro2 Lumber Tally
ZT410, serial # 18J160513988, includes Intermec cordless scanner and lots of labeling paper

133

Red Head Carbide Drill Bits
1 1/8" x 18" spline drive, 2 are brand new, total of 13 concrete bits, various sizes

134

Alcoa Thread Repair Kit
7 kits

135

Drive Chain Breakers
1 60-100, 1 120-160

136

Maintenance Bag Loaded with Tools and Supplies
Includes small pile of misc. beside bag

137

Motorola Radios
20+ radios, single chargers, 2- 6 bay chargers, and microphones

138

Columbian Vise and Funnels
.

139

Volvo Cylinders
For L90E and L90F, short cylinder middle of mast, total of 6

140

Browning Syncrogear Reducer
Frame 6, Model # Z08-E458-N

141

Milwaukee Hole Saw Set and Ampro Air Hammer
.

142

High Voltage Tester and Fluke Pro3000 Toner and Probe
.

143

Craftsman Band Saw Blades
7- 93 1/2'' x 3/8", 5- 80" x 1/4"

144

Weiler Single Row Wire Cup Brush
6" total of 5

145

DeWalt Palm Sander
.

146

20 Flap Discs for Angle Grinder
.

147

Skid Of Logger Supplies
9- chainsaw bars, 14- replacement sprocket nose kit, 16- chains, 38- bottles of 2 cycle oil, 3- protective chaps, lots of files and 1 Husky saw that doesn't run

148

Banding Crimper
Brand new

149

Banding Crimper
.

150

Banding Crimper
.

151

Banding Crimper
.

152

Banding Tightener
Brand new

153

Banding Tightener
Brand new

154

Banding Tightener
Brand new

155

Banding Tightener
.

156

Banding Tightener
.

157

Banding Tightener
.

158

Banding Crimper
.

159

Electric DeWalt Socket Driver, Electric Milwaukee Drill, Skill Saw etc.
.

160

20 V DeWalt Tools
Hognose, impact and flashlight, includes 2- 5 Ah and 2- 1.5 Ah batteries, 2- chargers

161

18 V DeWalt Drills
3 drills, 7 batteries, 3 chargers, includes Porter-Cable cordless drill

200

30'x15.5' 5 Strand Log Deck with H78 chain
30'x15.5' 5 Strand Log Deck with H78 chain, Gear Reduction Drive- steel support to the ground.
THE FIRST OF AN ENTIRETY

201

202

22'x36" Endwise Log Trough
22'x36" Endwise Log Trough, SYMCLO gear reductions drive, steel supports to the ground; catwalk attached; 15 HP motor

203

30 HP Hydraulic Pack MACHI-VARIABLE Vain Pump
30 HP Hydraulic Pack MACHI-VARIABLE Vain Pump

204

1997 Nicholson 35" A6 4 Arm Right Hand Debarker (sn: 6846)
1997 Nicholson 35" A6 4 Arm Right Hand Debarker (sn: 6846), 75 HP Electric Motor; 25 HP Hydraulic Pack; 35 HP Motor Gear Reduction Drive on the chain through feed.; includes steel supports to the ground.

205

16'x36" Endwise Log Trough; 10 HP Gear Reduction Drive
16'x36" Endwise Log Trough; 10 HP Gear Reduction Drive, steel supports to ground, and catwalk attached

206

207

Tie Back of Lots 200-206 with 10% Raise
Tie Back of Lots 200-206 with 10% Raise

208

209

210

18' Rotating Log Kicker System (10 ft total height) Hydraulic Drive. No Hyd. Supply included. Unbolt from log trough frame
18' Rotating Log Kicker System (10 ft total height) Hydraulic Drive. No Hyd. Supply included. Unbolt from log trough frame

211

25'x15' 5 Strand Log Deck; H78 Chain, 7.5 HP Gear Reduction Drive;
25'x15' 5 Strand Log Deck; H78 Chain, 7.5 HP Gear Reduction Drive; S-Drive construction. Steel supports to the ground

212

29'x14' 5 Strand Log Deck- H78 Chain
29'x14' 5 Strand Log Deck- H78 Chain, 7.5 HP Gear Reduction Drive; Steel support to the ground

213

EX-CO Industries 10'x15' Decline Step Feeder
EX-CO Industries 10'x15' Decline Step Feeder, Hydraulic operated. No Hyd. Supply

214

32'x36" Endwise Log Trough, 15 HP motor,
32'x36" Endwise Log Trough, 15 HP motor, SYMCLO gear reduction drive; S Drive Construction

215

216

217

218

Allen Bradley Centerline MCC Panel, 800 amp.
Allen Bradley Centerline MCC Panel, 800 amp. No Wire or Conduit included

219

220

221

37'x10.5 3 Strand Log Deck, 3 Arm Stop and Loader,
37'x10.5 3 Strand Log Deck, 3 Arm Stop and Loader, H78 Chain; 5 HP Gear Reduction Drive; steel support to the ground

222

Shed over the Fulgum Debarker.
Shed over the Fulgum Debarker. Approx. 22'x24', catwalk, steel to the ground

223

Fulgum Model E-1018 Rosserhead Debarker (
Fulgum Model E-1018 Rosserhead Debarker (SN: F100607), 20 HP Hydraulic Pack. Will pass a 21' log.

224

44"x 65" Metal Cabinet for flamables
44"x 65" Metal Cabinet for flammables near the Fulgum Debarker

225

45' x8.5" 3 Strand Log Deck, H78 Chain, 3 Arm Stop and Loader,
45' x8.5" 3 Strand Log Deck, H78 Chain, 3 Arm Stop and Loader, 5 HP Gear Reduction Drive, Support steel to the ground

226

Morbark Debarker Model 636 (SN:285) 100 HP Main Electric Motor,
Morbark Debarker Model 636 (SN:285) 100 HP Main Electric Motor, 30 HP Electric Motor on Hydraulics which includes cab, Supports to the ground, No motor controls

227

228

30'x36" Endwise Log Trough, S Drive Construction, SYMCLO Gear Reduction Drive
30'x36" Endwise Log Trough, S Drive Construction, SYMCLO Gear Reduction Drive

229

230

231

232

National Boiler Company Reserve Air Tank
National Boiler Company Reserve Air Tank under the Nicholson Debarker

233

Vibrating Conveyor 20'
Dynamic Action Equipment Company Synchronous Frequency Balanced Vibrating Conveyor 20'6'x 24"bottom,15" sides 3 HP Motor with Switch, Motor Controls attached as marked (sn: 6-1448-1) 7/8 Stroke, 10 HP ??

234

Vibrating Conveyor 78'
Dynamic Action Equipment Company Synchronous Frequency Balanced Vibrating Conveyor 78' with 24" Bottom, 15" sides, 30 " top (SN: 6-1448-2), 10 HP Motor includes 5; Fiberglass Sections, Motor Disconnect as marked

235

Vibrating Conveyor 80'
Dynamic Action Equipment Company Synchronous Frequency Balanced Vibrating Conveyor 80' with 24" Bottom, 15" sides, 30 " top (SN: 6-1448-2), 10 HP Motor includes 5; Fiberglass Sections, Motor Disconnect as marked

236

237

238

361

239

Motor Control Panel includes (2) size 5, (1) size 4 , 100 Amp Disconnect.
Motor Control Panel includes (2) size 5, (1) size 4 , 100 Amp Disconnect. No wire or conduit included.

240

241

242

64'x11.5' 5 Strand Log Deck with Gear Reduction Drive, H78 Chain, 3 Arm Stop & Loader.
64'x11.5' 5 Strand Log Deck with Gear Reduction Drive, H78 Chain, 3 Arm Stop & Loader. Steel Supports to the Ground

243

Corley Bar Type Log Tuner;
Corley Bar Type Log Turner; Just Turner Unit No Valves or Hydraulic Supply

244

Corley 3 Head Block Lineal Position Slant Carriage
Corley 3 Head Block Lineal Position Slant Carriage includes the track, bumpers, and panograph. No controls Does seem to have moderate fire damage to carriage.

244-A

244B

Air reserve tank
Air reserve tank under carriage area

245

McDonogh 6' Right Hand Tilted Band Mill (sn: 72MA458)
McDonogh 6' Right Hand Tilted Band Mill (sn: 72MA458) Slat Off Bearer. Shows signs of fire damage. No motor or controls

246

13'x32" Slab Dump-
13'x32" Slab Dump- Belt has been burned off

247

12' Air Operated Cant Push Bar
12' Air Operated Cant Push Bar No visible fire damage

248

Corley 75' Main Rollcase
Corley 75' Main Rollcase (25) Live Rolls, 24"x8" rolls, (1) 4' 5 Arm Pop UP, (1) 3' 3 Arm Pop Up; (2) Air Stops, (1) 5 Arm Air Operated Cant Kicker, 5 HP Gear Reductions Drive, Disconnect as Marked. Some Visible Fire Damage in Middle Sections from above heat.

249

24'x11.5' 5 Strand Log Deck
24'x11.5' 5 Strand Log Deck includes Stop & Loader; Gear Reduction Drive. Feeds the Cooper Scragg

250

Cooper End Dogging Twin Scragg Mill
Cooper End Dogging Twin Scragg Mill to include Log Loading System. Twin R.H & L.H 62" McDonough Band Mills; (2) 150 HP/ 1190 RPM motors; (somewhat extensive damage, cab controls and scanner complete loss. The Fire followed the hydraulic system))

250A

Replacement wiring for Cooper Scragg Pre cut 6 cases
Cooper Scragg replacement wiring , Pre cut  6 cases

251

Miller Dialarc 250 AC/DC Constant Currant Welder
Miller Dialarc 250 AC/DC Constant Current Welder with leads- visible fire damage- condition unknown

252

Cooper 46' Outfeed Rollcase
Cooper 46' Outfeed Rollcase (22) 7'x8" Live Rolls; (1) Air Stop. Gear Motor Drive. No visible fire damage.

253

Transfer Deck System
Transfer Deck System to include 8' 5 Arm Jump Up Transfer, (1) 6'x16' 6 Strand Transfer Deck- H78 Chain

254

11'x13' Transfer Deck,
11'x13' Transfer Deck, H78 Roof Top Chain. Decks have 1 common gear motor drive, Pop Up Rollcase (7) 24x8" Rolls, Steel Supports to Floor, No Visible Fire Damage

255

25' Rollcase
25' Rollcase (9) 24x8" Live Rolls with 2 HP Gear Reductions Drive

256

Scherman Clam Shell Gang Saw
Scherman Clam Shell 10'' Guided Saw Bottom Arbor; 54" wide Gang Saw; Model 10SBA-54 (sn: 3166) to include 16' Hands Free Infeed Table with Cant Turners, Laser Guide Light System, Corley Cab with Controls; has USNR Controls. Fire traveled through the oiler systemand affected laser light systems. Cab and controls show NO visible damage.

257

(2) 200 HP Electric Motors
(2) 200 HP Electric Motors with fire damage

258

Corley 17' Outfeed Rollcase
Corley 17' Outfeed Rollcase (6) 60"x8" Live rolls with Gear Reduction Drive, 3 HP drive motor.

259

21'x12.5' 5 Strand Transfer Deck,
21'x12.5' 5 Strand Transfer Deck, H78 chain, operates at angle. Gear Reduction Drive; Steel to floor. Minimum visible fire damage.

260

McDonough 54" Horizontal Band Resaw.
McDonough 54" Horizontal Band Resaw. 7 1/4" face; 13/16 of inch thickness (SN: H54.1532.MBC); 75 HP motor, 7" band includes 16' Infeed Rollcase (7) 30"x8" Live Rolls, Cant Positioner, Cant Turner, Sawyer cab with controls. Very minimum visible damage

261

17' Outfeed Rollcase
17' Outfeed Rollcase (80 42"x8" Live Rolls; (6) 54" 6 Arm Jump Up Transfer, Hydraulic Drive- Steel Support to Floor

262

262A

Lots 260-262 Tied together with 10% raise.
Lots 260-262 tied together with 10% raise

263

Thermal Transfer 15 HP Hydraulic Pack
Thermal Transfer 15 HP Hydraulic Pack with minimal fire damage to electric wires

264

23'x 24" Belt Conveyor
23'x 24" Belt Conveyor (belt burned off) Gear Reductions Drive

265

266

10'x12.5' Return Deck
10'x12.5' Return Deck with 5 Strands of H78 Turtle Back Chain, Gear Reduction Drive. Steel Support to floor

267

20'x12' 5 Strand LumberTransfer Deck
20'x12' 5 Strand LumberTransfer Deck; H78 Chain, 5 HP Gear Reduction Drive, Support Steel to floor, Minimal visible fire damage.

268

269

15'x13' 5 Strand Transfer Deck
15'x13' 5 Strand Transfer Deck with H78A Roof Top Chain; 5 HP Gear Motor Drive. Minimal visible fire damage

270

6'x13' Waterfall Unscrambler System with Lumber Singulator
6'x13' Waterfall Unscrambler System with Lumber Singulator includes (1) 8'x13' 5 Strand Lumber Transfer Deck w/ H78 chain, Gear Reduction Drive; 6' Transfer Deck w/ (5) 32"x8" Evenender Rolls. Some visible fire damage.

271

CSMI Edger EDG8746 System (sn: 33848746894)
CSMI Edger EDG8746 System (sn: 33848746894) Extensive Fire Damage. Includes Infeed Decks, High Speed Infeed Rollcase; Edger Box, Main Motor. Steel Supprt to floor.

272

17'x36" Outfeed Belt Conveyor
17'x36" Outfeed Belt Conveyor; 36" flat belt with Finger Slab Tailing System; 5 hp Gear Motor Drive. Support Steel to Floor. Mimimum visible fire damage

273

17'x36" Belt Conveyor;
17'x36" Belt Conveyor; 5 HP Gear Motor Reduction Drive, Steel Support to Floor. Minimal visible damage.

274

275

Motor Control Panel
Motor Control Panel Square D 500 amp breaker box, (1) size 4, (2) size 5, (2) size 3, (1) size 2 and (4) size 0 starters. NO apparent fire damage

276

Motor Control Panel
Motor Control Panel to include 200 amp breaker, Allen Bradley Power Flex 525, (2) size starters, (7) size 0 starters, (1) size 1; misc starters in box. NO apparent fire damage

277

Motor Control Panel
Motor Control Panel 500 amp disconnect (2) size 5, (1) size 4, (2) size 0 starters 400 amp disconnect, (1) size 3, (1) size 4 starter NO apparent fire damage

278

Motor Control Panel
Motor Control Panel 800 amp disconnect. NO apparent fire damage

279

Motor Control Panel
Motor Control Panel (2) 400 amp switches, (3) size 5, (1) size 4, (2) size 0, (1) size starters. NO apparent fire damage

280

Motor Control Panel
Motor Control Panel 400 amp disconnect, (1) size 3, (1) size 4 starter NO apparent fire damage

281

Motor Control Panel
Motor Control Panel 600 amp disconnect; (3) size 0, (1) size 3, and (1) size 4 starters. NO apparent fire damage

282

Motor Control Panel
Motor Control Panel 200 amp Disconnect (2) size 0 starters,

282A

drill press
.

283

284

285

20'x10' 3 Strand Lumber Deck,
20'x10' 3 Strand Lumber Deck, Roller Type Chain, 5 HP Gear Motor Drive. Support Steel to 1st horizontal beam

286

10'x10" 3 Arm Pop Up Transfer Chain
10'x10" 3 Arm Pop Up Transfer Chain; Roller Chain; 3 HP Gear Reduction Drive No visible fire damage. Steel Support to 1st Horizontal Beam

287

21'x10' 4 Strand Lumber Transfer Deck
21'x10' 4 Strand Lumber Transfer Deck, H130 Roof Top Chain, Gear Reduction Drive. Support Steel to 1st Horizontal Beam

288

27'x12.5" 4 Strand Lumber Deck
27'x12.5" 4 Strand Lumber Deck (3) H78 Roof Top Chain; (1) H78 Chain; 5 HP Gear Motor Drive. Support Steel to 1st Horizontal Beam

289

Corley 5' Strand Unscrambler Model LU021 (sn: 15918)
Corley 5' Strand Unscrambler Model LU021 (sn: 15918); H78 Lugged Chain, 5 HP Gear Reduction Drive. Steel Supports to 1st Horizontal Beam

290

291

292

66' Belt Conveyor 16" Belt
66' Belt Conveyor 16" Belt; Gear Reduction Drive

293

294

295

296

Lumber Transfer System
Lumber Transfer System to include 96) 72"x13" Evenender Rolls; 6x14' 5 Strand Deck with Hyd. Drive; 8x13' 5 Strand Deck with Hyd. Drive

297

90 Degree Radial Lumber Transfer & 6 Arm Air Operated Stop
6 Arm Air Operated Stop; 5'x13' 5 Strand Decks with Hyd. Drive; 40'x13' 90 Degree Radial Lumber Transfer with Hyd. Drive

298

Lumber Transfer Deck to Upper Grading Station
Lumber Transfer Deck to Upper Grading Station- 3.5'x13' 5 Tiple; 5'x13' 6 Strand Transfer Deck, Hyd. Drive; 22'x13' 5 Strand Haul Up Deck with Lugged Chain and Hyd. Drive

299

CSMI Lumber Grading Station
CSMI Lumber Grading Station to include: 19'x13' 5 Strand Transfer Deck, 7'x13' 5 Strand Transfer with 5 Arm Lumber Stop and Board Singulator Rolls to the Grading Board, 8' 7 Strand Lumber Transfer Deck; All Hydraulic Drive, Steel Supports to the Floor. Will NOT include Hydraulic Supply. Control Booth and Controls total loss. No Fire Damage to Equipment.

300

12' 5 Strand Decline Lumber Transfer
12' 5 Strand Decline Lumber Transfer to the lower Grading Station Line. Hydraulic Drive

301

CSMI Lumber Grading Station
CSMI Lumber Grading Station to include: 19'x13' 5 Strand Transfer Deck, 7'x13' 5 Strand Transfer with 5 Arm Lumber Stop and Board Singulator Rolls to the Grading Board, 8' 7 Strand Lumber Transfer Deck; All Hydraulic Drive, Steel Supports to the Floor. Lower Grading Station has been Operational since Fire. No Fire Damage

302

30' 5 Strand Incline Deck
30' 5 Strand Incline Deck with Lugged Chain. No Sprokets or Shafts. Break Chain at both ends. THE FIRST OF AN ENTIRETY

303

CSMI TS3309 Optimizer Multi Saw Trimmer 16' with a Minus 1 Saw
CSMI TS3309 Optimizer Multi Saw Trimmer (SN: 33833308994) 16' with a Minus 1 Saw: to include CSMI Scanner System; Infeed Lumber Transfer Conveyors, Evenender Rolls, Push Button Contrls as marked, Main Electric Panel as marked. NO Main Unattached motor Controls

304

305

CSMI Hydraulic Pack
CSMI Hydraulic Pack with (1) 30 HP Electric Motor and (1) 15 Hp Electric Motor. No Motor Controls

306

CSMI 50 Bay Sorting System
CSMI 50 Bay Sorting System includes 38 Bay Bin Sorter; 12 Sling Sort Bays Zoned for Timbers; all Controls and Electronics in Operator Office, Hydraulic Pack; Roof over the Sort System that is attached to Sorter. Evenends to Left Hand Side. Software Updated: ???

307

235' 4 Strand Landing Deck
235' 4 Strand Landing Deck under Sorter System; H78 Chain; (1) 15 HP Motor, S Type Construction;181 Chain

308

CSMI 8' Sticker Stacker System
CSMI 8' Sticker Stacker System to include 15' 5 Strand Lumber Transfer Deck; 7.5 HP SYMCLO Gear Reduction Drive; 181 Chain; 8' 8 Strand Unscrambler with Lumber Singulator, (5) 6'x13" Evenender Rolls. Complete 6 Blade Stacking Unit T Elevator System; Lumber Package Rollout Rollcase with (15) 8.5'x9" Rolls; 30' 3 Strand Stick Deck; Hyd. Supply with 50HP Elec. Motor, 30 HP Elec. Motor, 15 HP Elec. Motor, 20 HP Elec. Motor. All Control Panels as marked and Catwalk. All Wire and Conduit from Trimmer System Included.

309

Tie Back 299-308 With 10% Raise
Tie Back 299-308 excluding lot 300 With 10% raise

310

400 amp disconnect, (1) size 3, (1) size 4 starter
400 amp disconnect, (1) size 3, (1) size 4 starter NO apparent fire damage ???

311

Allen Bradley 1600 amp MCC Electrical Panel located under the trimmer.
Allen Bradley 1600 amp MCC Electrical Panel located under the trimmer. No Inlet or Outlet included.

312

Siemens (2) 200 amp Safety Switch, (1) 30 amp Safety Switch.
Siemens (2) 200 amp Safety Switch, (1) 30 amp Safety Switch. No Wire or Conduit Included

313

314

454

315

316

317

318

Miller DialArc 250 amp AC/DC welder
Miller DialArc 250 amp AC/DC welder with leads outside of the room on reel stand

319

320

321

Tools on Wall
Tools on Wall to include wrechnes, pip wrench, air impact wrench, angle grinder, red metal tool box and contents inside the Sorter Operator Room

322

(2) Safety Harnesses inside the Sorter Operator Room
(2) Safety Harnesses inside the Sorter Operator Room

323

(2) National Welder Hoods inside the Sorter Operator Room
(2) National Welder Hoods inside the Sorter Operator Room

324

(1) Bolt Bin and inside the Sorter Operator Room
(1) Bolt Bin and inside the Sorter Operator Room

325

(1) 4 Drawer Metal Parts Cabinet
(1) 4 Drawer Metal Parts Cabinet inside the Sorter Operator Room

326

Microwave and Small Frig
Microwave and Small Frig inside the Sorter Operator Room

327

Jet 1/2 Ton Electric Chain Hoist includes I-Beam
Jet 1/2 Ton Electric Chain Hoist includes I-Beam located between Sorter and Trimmer

328

1 Ton Manual Chain Hoist
1 Ton Manual Chain Hoist located between Sorter and Trimmer

329

42" Portable Fan at the Stacker
42" Poartable Fan at the Stacker

330

331

Metal Stick Rack 3x6'
Metal Stick Rack 3x6' at the Stacker

332

Metal Bundle Rack 6x9'
Metal Bundle Rack 6x9' at the Stacker

333

(2) metal waste bins 4x8'
(2) metal waste bins 4x8' at the Stacker

334

Plastic Banding
(3) 400 ft Unopened Boxes of 5/8" plastic banding and (2) partial rolls

335

Section of Vibrating Fiberglass Section
(1) 60"x24" bottom Section of Vibrating Fiberglass Section located outside the Stacker Building

336

30' Aluminum Extension Ladder
30' Aluminum Extension Ladder at the Stacker

337

75'x30' Metallic Brand Open Span Building
75'x30' Metallic Brand Open Span Building ove rthe Stacker sides are 18'

338

Complete Lumber Breakdown System
Complete Lumber Breakdown System to include 25' 4 Strand Package Deck, 181 Chain, S-Drive Construction, Hyd. Drive. 8' 4 Arm Breakdown Deck. 12' 5 Strand Lugged, 181 Chain Decline Deck. 10' 4 Strand Transfer Deck, 181 Chain. Push Button Control Panel. Hydraulic Power Supply. 50 Hp Electric Motor. No Motor Controls. will Include Support Stell to the Ground and Catwalk System

339

20' of 24" Belt Conveyor with 5 Hp Gear Motor Drive
20' of 24" Belt Conveyor with 5 Hp Gear Motor Drive. No Motor Controls. Supports to the 1st Horizontal I-Beam

340

22' of 24" Belt Conveyor with 5 Hp Gear Motor Drive.
22' of 24" Belt Conveyor with 5 Hp Gear Motor Drive. No Motor Controls. Supports to the 1st Horizontal I-Beam

340A

50'x24" Belt Conveyor
50'x24: Belt Conveyor with 5 HP Gear Motor Drive.  No Controls

341

Sullair S-Engery 5500 Model 5509B Rotary Screw Compressor
Sullair S-Engery 5500 Model 5509B (sn: 201511300022) 75 HP Electric Motor

342

Sullair Model LS16ST Air Compressor
Sullair Model LS16ST (sn: 003-112781) Air Compressor, 75 HP Electric Motor & Disconnect. (41,850 hours) under Carriage

343

Sullair SAR400 Air Dry System
Sullair SAR400 Air Dry System (sn: 003-14425) under Carriage

344

Sullair Model 16BS-75L (sn: E03-953-92) Air Dry System
Sullair Model 16BS-75L (sn: E03-953-92) Air Dry System (80,259 hours) 75 HP Electric Motor and Disconnect under Carriage

465T

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

345

Sullair SAR400 (sn: 003-D14082) Air Dry Sytem
Sullair SAR400 (sn: 003-D14082) Air Dry Sytem Under Carriage

346

Sullair 16BS (sn: E03-95395) Air Compressor
Sullair 16BS (sn: E03-95395) (55,292 hours), 75 HP Electric Motor- Disconnect as Marked

347

348

349

Motor Control Panel
Motor Control Panel with 200 amp Disconnect, (1) size 3, (1) size 2, (2) size 1 Starters

350

351

New Atlas Cop-Co Model LS10 Vertical Tank Mount Air Compressor
New Atlas Cop-Co Model LS10 Vertical Tank Mount Air Compressor, 10 Hp Electric Motor NEVER INSTALLED

352

353

125' Vibrating Conveyor
125' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 28" top, 18" bottom, 13" sides. Steel Supports to Ground, 10 HP Motor

354

100' Vibrating Conveyor
100' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 18"bottom, 6" side, 24" top with 7.5 HP Motor under Radial Conveyor. Steel Supports to Ground

355

38' Vibrating Conveyor
38' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 24" bottom, 30" top, 14" sides with 7.5 HP motor, Very minimal Fire dAmes; Paint Discoloration only located under the High Speed Edger. Steel Support to the Floor

487

356

100' Vibrating Conveyor
100' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 24" bottom, 30" top, 14" sides with 15 HP Motor. Steel Support to the Ground Outside Edger Close to Chipper.

357

33' Vibrating Conveyor
33' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 18" bottom, 24" top, 6" sides with 3 HP Motor Steel Support to the Ground

358

40' Vibrating Conveyor
40' Dynamic Action Equipment Co.Synchronous Frequency Balanced Vibrating Conveyor 18" bottom, 24" Top, 12" sides with 3 HP Motor has Balanced Fiberglass Paddles located under the High Speed Edger

359

78' Webster Vibrating Conveyor
78' Webster Vibrating Conveyor with 15 HP Motor 24" bottom, 32" top, 10" sides

360

75' Webster Vibrating Conveyor
75' Webster Vibrating Conveyor includes 5' fiberglass Sections. 24" bottom, 32" top, and 10" sides with electric motor 10" Saw Dust Screen

362

MDI Metal Detector
MDI Metal Detector going up to the Chipper

363

Fulgum 60' 8 Knife Chipper with 200 HP Electric Motor.
Fulgum 60' 8 Knife Chipper with 200 HP Electric Motor. No Motor Controls, Pipe to Cyclone, Cyclone. Fulgum 8x8 Shaker Screen. No motor controls

364

365

40' Chip Conveyor with H78 Drag Chain
40' Chip Conveyor with H78 Drag Chain, Gear Motor Reduction Drive

366

367

Fulgum Chip Pack
Fulgum Chip Pack to include 60" 8 Knife Chipper, 200 HP Electric Motor. No motor controls, Pipe Collector. Fulgum 8x8 Shaker Screen, No motor controls.

368

30' Fulgum Vibrating Conveyor
30' Fulgum Vibrating Conveyor 24" bottom, 32" top, 10" sides includes 5' Fiberglass Section

369

40' Chip Conveyor with H78 Drag Chain
40' Chip Conveyor with H78 Drag Chain, Gear Motor Reduction Drive to trailer loading system

370

371

Motor Control Panel and Disconnect
Motor Control Panel and Disconnect to operate Chip Load Out System

372

Auger Conveyor
17'x6" Auger Conveyor for saw dust with motor and drive

373

30'x6" Auger Dust Conveyor
30'x6" Auger Conveyor for saw dust with motor and drive

374

15'x8" Auger Dust Conveyor
15'x8" Auger Conveyor for saw dust with motor and drive

375

40'x16" Saw Dust Haul Up Conveyor
40'x16" Saw Dust Haul Up Conveyor , H78 Drag Chain ot Saw Dust Load Out System

376

36' Dual Trailer Auger Type Saw Dust Loading System
36' Dual Trailer Auger Type Saw Dust Loading System with Controls as marked

377

(2) 20'x20' Open Span Buildings
(2) 20'x20' Open Span Buildings over Chippers, Steel support to the ground

378

24''X65' Belt Conveyor with 23" Belt, 8'' sides
Located under the Cooper Scragg, 7.5 HP motor No motor controls, belt is partially melted from fire.

379

30' Saw Dust Conveyor
30' Saw Dust Conveyor with 8" Ladder Back Chain, Motor and Drive. No motor controls

380

25'x16' 8 Strand Clean Out Deck
25'x16' 8 Strand Clean Out Deck under mill 81x chain. Motor and Drive. No motor controls

381

13'x15' 8 Strand Clean Out Deck
13'x15' 8 Strand Clean Out Deck under Mill, 1 HP motor

382

383

Wire and Conduit in Main Sawmill Building NOT to include any wire or conduit to Log Merchandizing System or from 10' Unscrambler to Sorter Syste
All Wire and Conduit in Main Sawmill Building NOT to include any wire or conduit to Log Merchandizing System or from 10' Unscrambler to Sorter System. Only includes inside Main Sawmill Building Where Fire Occurred.

384

385

Corely 8x60" Gang Edger
MFG: 1986 (TAE860003)

386

Sawmill Building
Irregular shaped all steel building

400

Yates American A20 Planer
8'' x 14", 4 heads total, 1 top 1 bottom and 1 on each side, (6) Knife Side Head, (6) Knife Planer Heads, Includes Dust Trees to Main Trunk Line, Planer and Feed Table Run Together on Same Power

401

Double Pineapple Planer Feed Table
Newman Machine W/ (5) Rolls, S/N 9210 W/ Pedestal Operator's Controls W/ Foot Control

402

OSHA Guards
Around Planer

403

(2) Lincoln Motors
25 HP and 200 HP

404

Planer Knives & Belts W/ Steel Table
(3) Sets of Eased Edge Side Heads (6) Knife, (1) Set of Straight Knife 4", (1) Set of Straight Knife 6", (1) Set of Planer Belts, Includes Steel Table 4' x 28" Top

405

Planer Outfeed Belt Conveyor
22' x 22" Bottom, 34" Overall, 18" Belt W/ 11" Sides W/ 2 HP Motor & Reduction Drive

406

Toshiba Transistor Inverter
G3 TosVert 130

954

407

Package Deck
20' x 9' Wide (3) Strand HD W/ 6" Straight Pentile (Roll) Chain, Hydraulic Motor W/ Gear Reduction Drive (Direct Couple)

407A

1 Lot of Hand Tools and Power Grease Gun
I 1lot of hand tools and Power Grease Gun  LOCATED IN PLANER ROOM IN PLANER MILL

408

(3) Strand Conveyor & Breakdown Hoist
10' x 11' Wide (3) Strand Conveyor for Breakdown Hoist W/ Hydraulic Motor & Direct Couple Drive - 7' (4) Chain Arm Breakdown Hoist W/ Hydraulic Drive & Direct Couple Philadelphia Gear Drive W/ Stick Conveyor, Apron Plates & Lumber Slide, 21' Stick Conveyor has Electric Motor & Reduction Drive, 6" Belt

409

Hydraulic Power Pack
20 HP

410

Lumber Landing Conveyor
31' x 11' W/ (4) Strands 81X Chain, 5 HP Motor, 1725 RPM W/ Reducer

411

Tipple Dropout
(4) Arm, 3' Arms to Center Split Resaw attached to 18' x 11' (3) Strand Transfer Deck W/ (1) Strand of 81X Chain & (2) Strands of H-78 RT Chain

412

26' Belt Conveyor
W/ 3" Flared Trough, 16" Belt, 18" Bottom, 22" Overall, Tipple Dropout Conveyor to Center Split Resaw

413

Planer Bridge
5' x 11' (4) Strand W/ 81X Chain W/ 3 HP Motor & Reduction Drive

414

Landing Chain & Infeed to Trimmer
21' x 10' W/ Steel Plate Landing Section W/ (2) Strands of H-78 RT Chain W/ (1) Strand of 81X Chain W/ 2 HP Motor & Reduction Drive, (4) Arm Hydraulic Stop

415

(9) Station Drop Saw Trimmer
W/ Independent Motors, Odd Even Setup W/ Hydraulic Paddle Fence W/ Variable Feed Through Chain & Toshiba Controller, Includes Built in Waste Conveyor

416

20' Lumber Conveyor
(4) Strand behind Trimmer 12' Wide W/ 81X Chain W/ 3 HP Motor & Drive W/ Operator Control Box

417

(3) Strand Package Conveyor
10' x 9' Wide W/ RC120 Roller Chain W/ Hydraulic Motor & Drive

966

418

Hydraulic Power Pack
7.5 HP W/ 18" x 30" x 12" W/ OSHA Guard

419

Yates American V54 Center Split Resaw
Weighted Strain B22350 W/ 50 Hip Motor, 14" Fence W/ Operator's Station and Foot Control, No Dust Pipe Includes 50 HP motor

420

13' Infeed to Center Split Resaw
10" Wide Bottom W/ (2) Strands of 81X Chain and Room for Another Strand, 12" Deep & 16" Overall

421

Landing Deck
11' x 13' Wide Lumber Landing Table, (1) Strand of 81X Chain, (3) Strands of H-7i Mill Chain W/ 3 HP Motor & Drive

422

Outfeed from Resaw
15 1/2' Belt Conveyor W/ 16" Bottom x 9 3/4" Deep, 29" Overall W/ 3 HP Motor & Drive 

423

Toshiba Ge Tosvert-130 Transistor Inverter
W/ Box Mounted on Resaw Outfeed  

424

Lumber Carts
(3) 4 x 8' HD Steel Lumber Carts W/ Kiln Trucks, 3 X the Money

977

425

Lumber Carts
 4 x 8' HD Steel Lumber Carts W/ Kiln Trucks

978

426

Lumber Carts
 4 x 8' HD Steel Lumber Carts W/ Kiln Trucks

427

Steel Lumber Cart
4' x 6' HD

428

(2) Lumber Carts
Lineberry & Old Compressor Component

429

Planer Parts
Under Resaw Outfeed - Pulleys, VFD Unit (Mechanical Style), Energy Electric 31 HP Motor, 1156 RPM, 3 Phase 230/460 V, Reduction Drive Casing

430

(2) Bundles 42 x 3 1/4 x 3/4 Heat Treated US168270-HT Packing Slat boards
Approx. 120 Each Pack, Includes (20) 4 x 4 Non Heat Treated Cross Outs

992

431

Air Hose Reel
Mounted by Furnas MCC

995

432

Stair Section
39" High w/ 32' x 24' Platform, 3' Crossover Stair Unit,

996

433

Steel waste container
8' x 3 1/2" x 29" Deep

997

433A

Steel Waste Box
8' X 3-1/2' X 29" deep steel container

999

434

(2) Stacking Stick Racks
(1) Lot

1000

435

Furnas System 89 MCC
Series B, 3 Phase 800 Amp Horizontal Buss, 42K Amps, 600 Volts, 300 Amp Vertical Buss, Style 898SW5026-1, Includes any Additional Control Boxes

1002

436

Cabinet at Planer Mill #1
Delmorst Moisture Meter, Ear Plugs & Planer Books

1003

437

Cabinet at Planer Mill #2
Planer Knives & Various Planer Parts

1004

438

Bottom Cabinet
W/ Newman Feed Table Parts New & Used

3938

439

Cabinet at Planer Mill #3
(1) Party Size Percolator, (1) Espresso Coffee Maker Includes Small Break Room Shake W/ Contents & Air Conditioner - New Planer Feed Table Parts

3974

440

Flex Steel Ribbed & Plastic Hose, Belting
4 3/4" Flex Steel Ribbed HD & Plastic Hose, 9 1/2" Wide Roll of Belting

441

Profile Grinder
W/ Work Station & Head Stand & Additional Wood Construction Work Table 4' x 12'

442

Dome Lights
Under Planer Outfeed

443

Electrical Components in Planer Mill
Not Installed & Not Sold, Wear Plate, Strapping as marked

444

10 HP Tank Mount Air Compressor
120 Gallon Horizontal Tank Includes Additional 120 Gallon Reserve Tank

445

Shavings Collector Fan
Approx. 48" W/ Motor, 18" Intake & Discharge, Includes (1) Trunk Line in Planer Mill and Cyclone Collector

446

Dual Bay Van Level Load System
35' Auger Type Load W/ auto Switch Over

447

45' Split Level Conveyor
16" Wide, 12" Deep W/ Shaft Mount Reducer & Motor

448

Electrical at van level load
Dual Bay Load out, Motor Control at Van Level Load, (3) Furnas Size "0" MCC, (2) Westinghouse Size "0" MCC W/ GE 60 Amp Disconnect

449

Jeffrey W.B. Hog
Model 54 , S/N 13508 W/ Hopper Chute, Drop feed Bottom Discharge

449A

200 HP Electric Motor
1175 RPM 460 Volt Direct Couple W/ Hog  includes:  Transition Box
 

449B

45' Incline Conveyor, Flared Trough
H78 Drag Chain, 12" on Flare, 24" Overall W/ Apron Plate Hopper (Trimmer Blocks) to Hog

450

8' Dual Auger Discharge
from Hog W/ Direct Couple 5 HP Motor & Reduction Drive

451

Single Unit Overhead Van Level Load System
W/ 35' Auger W/ Shaft Mount Reduction Drive

452

30' Split Level Conveyor
16" Bottom, 12" Deep W/ H-78 Drag Chain & Wear Plate W/ Shaft Mount Reduction Drive & Motor to Van Level Load

453

Planer Mill Hog Electrical
Allen Bradley SMC Plus Protective Module, Square D 350 Amp Breaker W/ Staged Starter for 200 HP Motor, Includes at Least (5) Size "0" Motor Controls W/ 15 to 20 Amp Breakers, Cutler Hammer 400 Amp Safety Switch, Includes Raceway, 30 Amp disconnect l, 100 Amp Disconnect l for Hog

454

Planer Mill Building.
60'x100' x15'

455

Irvington Moore Stacker
Hydraulic Breakdown System, (4) Arm 8' Breakdown Hoist W/ HD Hydraulic Cylinder - (3) Strand HD Package Deck W/ S-Drive Construction, Tulsa Winch & 15 HP Motor, 81X Chain - 20 HP 30" x 16" x 48" Reservoir Hydraulic Power Pack - 8' x 12' Wide (5) Strand Breakdown Table w/ 81X Chain, 3 HP Motor & Drive has Apron Plate & Stick Dropout Conveyor (Not in Use) - 6' (7) Strand Waterfall Unscrambler w/ 81X Lug Chain W/ Assist Section, Operator Control, Motor & Drive, Sufficient to Operate - 25' x 12' Wide Grading Area W/ Board Hook Stop & dealer, (5) Strands 81X Chain W/ Return Channels, 12' Steel Plate Section W/ Grade Controls - (5) Arm 3' Board Air Tipple Attached Lumber Stacking Frame - 25' Endwise Belt Conveyor, 6" Deep Sides, 24" Belt & Bottom 30" Overall - 20' x 14' Wide Stacking Frame W/ Layer Catch W/ Even Ender, 8' (6) Arm Blade Type Stacking Arms W/ Motor & Drive W/ Operator's Control, Motor Controls at Stacking Frame - 8' x 16' Package Hoist Above Ground Cylinder & Chain Index - 40' x 8' W Package Rollout Conveyor W/ 3 HP Drive, 6 1/2" Rolls - 10 HP Hydraulic Power Unit 2 x 2 x 3 Reservoir - Platform Stick Placement Area, Stairs & Catwalks -

455A

Atlas Copco Air Compressor
(1991) 10 HP, Dual Piston, 80-100 Gallon, Horizontal Tank

456

16' Spiral Rollcase
W/ (9) Spiral Rolls 28" Wide, 6+/-" Diameter W/ Motor & Drive
from drop out tipple section on stacker line

457

Lumber Dropout Area
20' (4) Strand Accumulation Deck W/ 81X Chain W/ 3 HP Motor W/ Drive

458

(1) Convex Mirror
in Stacker Building

459

15' Incline Stick Belt Conveyor
12" Bottom, 4" Deep, 15" Overall W/ 3 HP Gear Motor

460

(2) Stacking Stick Racks
4 x 8'  Plus one man safety lift platform 

461

Belting of Various Lengths
(2) 20", 23", (2) 48", (2) 31", (2) 36"

462

Lot of Carriage Track and Misc.
20' Sections, Includes About (4) Sections W/ Speed Reducer & Variable Feed Drive (Manual) and Conveyor Sprocket & Shaft W/ Drive Sprocket

463

30'x120'x20’ eve height Stick Stacker Building
all steel clear span tappered steel columns at walls to 18" I-Beam steel at roof. Gutters. Both long sides have vertical steel coated. Ends are open. Skylights in roof. (6) 8' (2) lamp florecent fixtures

465

New 8’ Stacking sticks
1 Bundle 1020 sticks 3/4x1-1/4x96” Fluted sticks

465A

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96"  (Location: Fan Shed)


 

465B

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96"(Location: Fan Shed)
 

465C

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465D

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465E

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465F

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465G

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465H

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each   3/4 X 1-1/4 X 96"(Location: Fan Shed)

465I

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465J

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465K

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each   3/4 X 1-1/4 X 96" (Location: Fan Shed)

465L

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465M

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465N

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each   3/4 X 1-1/4 X 96"(Location: Fan Shed)

465O

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465P

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465Q

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465R

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96" (Location: Fan Shed)

465S

(1) Bundle of Fluted Stacking Sticks New
1020 Pieces/Each 3/4 X 1-1/4 X 96"(Location: Fan Shed)

466

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
8' long, Selling by the piece and times 6

466A

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466B

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466C

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466D

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466E

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466F

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466G

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466H

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466I

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466J

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466K

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466L

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466M

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466N

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466O

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466P

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466Q

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466R

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466S

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466T

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466U

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466V

(6) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 6

466W

(3) Bundles Of Fluted Drying Sticks approx. 2000 sticks per bundle
Selling by the piece and times 3

467

(2) Bundles of Breeze Drying Sticks
8' long, approx 1500 pieces , Selling by the piece and times 2

467A

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467B

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467C

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467D

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467E

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467F

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467G

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467H

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467I

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467J

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467K

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467L

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467M

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

467N

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

923

933

467O

(2) Bundles of Breeze Drying Sticks
Selling by the piece and times 2

934

468

Pop Up Cut Chop Saw
Mid-Oregon Industries Pop Up Cut Chop Saw, air operated, electric motor on saw. (SN: 24772)

469

Gravity Rollcase
16'x12" Gravity Rollcase

470

Gravity Rollcase
9'x24" Gravity Rollcase

471

Dust Blower W/ Collector bag
Grizzly 14" Dust Blower with Collector Bag

472

Mattison Stright Line Rip Saw
Mattison 207 Straight Line Rip Saw (SN 9837)

473

Dayton Dust Collector
Dayton 2 Stage Dust Collector made for Drum

474

Piper Saw Shop Band Chopper
Pipers Saw Shop Band Chopper

475

476

Factory Carts
(5) Factory Carts

477

Hand Tools, Brooms, Shovels, and Rakes
Lot of Hand tools, brooms, shovels, and rakes

478

479

480

Lumber Breakdown and Grading System
26' (4) strand package deck w/ 81X chain w/ S Drive Const. 7.5 HP mtr. 8' live chain arm breakdown hoist / Electric Brake w/ operator's controls 20' stacking stick drop out belt 12" w & 9-1/2" deep
includes catwalk and stairs. THE FIRST OF AN ENTIRETY 

481

Stacking Stick Unscrambler/Stacker
w/ (3) strands of welded bar 81X chain and gear motor

482

Lumber Landing Transfer Conveyor
27' (5) strands of 81 X chain motor and drive

483

USNR Board Dealer with Lug Loading Section
w/ grading chain with (6) dual channel strands. (1) channel 81X lug chain (1) channel 81X RT chain double sprocket drive 3 HP mtr & drive. 
 

484

52' Lumber Sorting Conveyor
(4) strands of 81X HD Chain 7.5 hp mtr. and drive
has pull stop cable length of conveyor

485

Lots 480 thru 484 with a 10% raise
USNR Complete dryline breakdown, grade and sort system
w/ stick removal and stacking unit.

486

Lumber Stacking Cart
3-1/2  4' overall X 10'   w/ (4) 3-1/2' tall bunks
with kiln truck wheels  

486A

Lumber Stacking Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks
with kiln truck wheels

486B

Lumber Stacking Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks
with kiln truck wheels

486C

Lumber Stacking Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks
with kiln truck wheels

486D

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486E

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486F

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486G

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486H

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486I

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486J

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486K

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486L

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486M

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486N

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486O

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486P

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486Q

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486R

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486S

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486T

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486U

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

486V

Lumber Cart
3-1/2 4' overall X 10' w/ (4) 3-1/2' tall bunks with kiln truck wheels

487

Verticle Tank Mount Air Compressor
BelAir 5 HP Verticle Tank Mount Air Compressor

488

489

Black Plastic Strapping
4 rolls 1x.05 Black Plastic Strapping

490

490A

6'x4' Steel Stick Carton Wheels
6'x4' Steel Stick Carton Wheels includes the sticks in the cart

Lot #

Title
Description

585

491

492

Barrel With Hand Tools
Barrel with Hand Tools

493

494

495

Approx. 33 Warehouse Lights
on floor in Grading building

496

Electric Control Panels
for grading line, no wire or conduit, 2 boxes

497

Holtec Transcut
Year 2017 SN 17091, 60" cut, 3 phase electric. NICE!

498

Mcdonough 62" New bottom Band Mill Wheel
BRAND NEW!  9.25" face

499

New Nicholson Debarker Arms
4 new arms and for refurbished arms for Nicholson debarker

1100

4/4 F1F-BTR ASH 1021 BD FT
12' 1 PACK K091018012

1101

4/4 F1F-BTR HICKORY 3018 BD FT
3 PACKS 10',12',14' 012815M,012715Z,012715Q

1102

3/4 1COM-SEL POP 821 BD FT
3 PACKS 10',12',16' K102317023 K071917019 K101917023

1103

3/4 2COM POP 2555 BD FT
2 PACKS 10',12' K071917019 K101917023

1104

3/4 FRAME POP 1883 BD FT
6 PACKS 10',12',14' K102017010 K071917025 K112316001 K102017001 K102017001 K102317006

1105

4/4 2COM POP 5615 BD FT
5 PACKS 8',10',12' K082818016 K100218004 K082718004 K082318008 K082318004

1106

4/4 SELECT5 POP 2222 BD FT
7 PACKS 8',10',12',14' K092018004 K091718014 K111418007 K102418018 K091818007 K111418016 K110218010

1107

5/4 1COM-SEL POP 1161 BD FT
2 PACKS 8',14' K102418009 K102418006

1108

5/4 6 POP 2963 BD FT
6 PACKS 6' K011718017 K021618003 K121217006 K101917014 K101917003 K101817022

1109

5/4 7 POP 4375 BD FT
7 PACKS 7' K021618002 K020818027 K011718016 K101917015 K101917007 K101917005 K101817021

1110

5/4 R-Q POP 2805 BD FT
2 PACKS 14' 012913II 121812Q

1111

8/4 FRAME POP 1498 BD FT
8 PACKS 8',10',12',16' K060917031 K051817009 K071317030 K052217003 K071317049 K051917020 K061217016 K051817014

1112

4/4 F1F-BTR-D RO 2702 BD FT
8 PACKS 8,10',12',14',16' K061318017 K112718021 K050218026 K042318002 K050718007 K050418005 K042018014 K061818030

1113

4/4 F-PS2S RO 7840 BD FT
7 PACKS 12',14',16' 826029 082602R 211106 211108 211107 211109 021110A

1114

4/4 WORMY RO 5612 BD FT
15 PACKS 7'-8' K112718028 K031918004 2030022 K040218013 K090417010 K020718008 K111717008 K041618025 K041317026 K061318015 K102518018 K071917010 K050418004 061112X K060717006

1115

4/4 WORMY RO 12,201 BD FT
19 PACKS 9'-10' K041317002 K071817020 K112718029 K020618034 K031518031 K061918003 K050418019 K112217018 K060917021 K090117012 K041918002 020209AA 202051 727048 011412G K040218028 011412M 011412P K050218009 061112M K081518007

1116

4/4 WORMY RO 18,300 BD FT
26 PACKS 11'-12' K112718030 101011P K113017005 111214N K111816018 K102616016 K110118011 K010518025 K050718010 K081518010 K071717003 041913Q K031518005 K060817036 K090517023 K050118007 072616CC K061818009 020812O 082009F 020209BB K112917014 201058 K041718019 K040418013 030515CC 011412S

1117

4/4 WORMY RO 7576 BD FT
11 PACKS 13'-14' K031918014 K041918014 K020518029 041913DD 072616F 020612V K050318002 K112717020 2030577 011412K 011412N 526086

1118

4/4 WORMY RO 1914 BD FT
3 PACKS 14'-16' 202052 K090117020 K071817025

1119

5/4 F1F-BTR-D RO 2546 BD FT
6 PACKS 9'-10' 010412Q 041912R 110911J 011713X 062912DD 803118

1120

5/4 F1F-BTR-D RO 4794 BD FT
5 PACKS 12' 110911D 080311U 082611J 010412P 121510CC

1121

5/4 F1F-BTR-D RO 2661 BD FT
5 PACKS 14' 110811Y 062912G 103012V 011713A 041912AA

1122

5/4 WORMY RO 1679 BD FT
6 PACKS 10',12',14' 120513PP 080311K 041912O 080311H 120513QQ 120513OO

1123

6/4 3A,F1F-BTR-D,COMSEL RO 4393 BD FT
17 PACKS VARIOUS LENGTHS 040910G 060810EE 412104 060910H 041210R 040910P 609108 041210E 060810Y 060810II 060910G 041210S 609109 041210D 041210T 060910K 040910O 041210A

1124

4/4 COMSEL WO 3848 BD FT
4 PACKS 10' K052118010 K052118021 K052118005 K061118019

1125

4/4 F1F-BTR-D WO 1341 BD FT
4 PACKS 8' K041118018 K052418020 K101818023 K112718014

1126

4/4 F1F-BTR-D WO 3706 BD FT
6 PACKS 10' K112118013 K040918014 K052118024 K032318015 K052118001 K040618008 K013118032

1127

4/4 F1F-BTR-D WO 4106 BD FT
6 PACKS 12' K040518023 K041018014 K051718027 K032318013 K051618012 K040518004

1128

4/4 F1F-BTR-D WO 1575 BD FT
3 PACKS 14' K101818030 K041018021 K052518003

1129

5/4 COMSEL,F1F-BTR WO 5216 BD FT
6 PACKS 14',12' K122016003 K121916012 K121916013 K122016001 K122016002 K121916014

1130

4/4 WALNUT
APPROX 250 BD FT

1131

4/4 ASH
APPROX. 300 BD FT

1132

4/4 & 3/4 RED OAK
VARIOUS LENGTHS, APPROX. 2000 BD FT

1133

5/4 WHITE OAK
OLD STOCK APPROX 2000 BD FT

1134

5/4 RUSTIC CHERRY
APPROX 275 BD FT

1135

5/4 POPLAR
APPROX 300 BD FT

1136

9 SKIDS OF PINE RUNNERS
3"X36" 

1137

36 SKIDS OF LUMBER CUTOFFS
VARIOUS SPECIES AND LENGTHS

1138

4"x4"x8' RUNNERS
FULL BUNDLE IN LUMBER BUILDING

499A

500

Anchorseal 2 Hybrid
End sealer for logs and lumber, 2 barrels and electric pump

501

Buckman UN3265-BSP293-DR
3 barrels unopened

502

Used Belt and Chain
Pallet of 20" used Belt and chain

503

New 48" belt
Roll of New 48" belt

504

Feed Rolls, Dual Sprocket, Debarker Feed Roller
3 Pallets of Feed Rolls, Dual Sprocket Debarker Feed Roller

505

30" Hydraulic Cylinder
30" Hyd. Cylinder

506

507

Steel cart with conduit
steel cart with conduit

508

28" Splined Arbor Gang Saw Blades
Pallet of 28" Splined Arbor blades, Stack is 38" tall, well used , teeth have very little life left

509

510

H-78 Chain
9 rolls of NEW H-78 Chain

511

Wooden saw carts
(8) Saw carts of wood

512

513

Lewis Controls
Lewis controls

514

515

Used Drives and Cylinders
(2) pallets of used Drives and Cylinders

516

Electrical Panels
Pallet Electrical Panels

802D

Barrel of Premium Blue AW146 Hydraulic oil in parts room
Barrel of Premium Blue AW46 Hydraulic Oil

517

58"x8" rolls
(6) 58" x8" Rolls

518

Belting
Lot of 48" Belt some cleated some flat

519

Base for drive
Base for Drive

520

Straps for USNR Sling Sorter
(16) New Straps for USNR Sling Sorter

521

Belting
New Belt 16" Wide 134' long and 3/8 thick

522

Belting
Rolls of 23" Belt and 16" Belt

523

Belting
Rolls of 24" x30' Rubber Belt

524

Belting
Roll of 30" x27', 9 " belt 3/8 thick

525

Belting
rolls of 36"x36' belt 5/16" thick

526

Belting
NEW Roll of 36" x 424'' already laced

527

Belting
(3) rolls of 21" x 25' for Cooper Saw, 5.5' long

528

Electric Motor
25 HP Lincoln Electric Motor

529

Electric Motor
Lincoln 75 HP 1775 RPM, 365T Frame Motor

530

Electric Motor
Lincoln 30 HP 1765 RPM, 286T Frame Motor

530A

Electric Motor
Lincoln 100 HP, 1775 RPM, Frain 404T Electric Motor

531

Electric Motor
Century 30 HP 1750 Electric Motor

532

Electric Motor
Lincoln 50 HP, 1780 RPM, 328 Frame Electric Motor

533

Electric Motor
Lincoln 200 HP, 1780 RPm Fran 784T Frame Electric Motor

534

Electric Motor
GE 25 HP, 1775 RPM Frame 784T Electric Motor

535

651

Detailed lot descriptions available Monday, Aug. 12
Click on link to see video

Parts room 2

536

Electric Motor
High Efficiency 40 HP, 1765 RPM, Frain 324 T Electric Motor

652

Detailed lot descriptions available Monday, Aug. 12
Click on video to see part room

Parts room 3

537

Electric Motor
Max-E1 Teco 7.5 HP, 865 RPM, Frame 256T

653

Detailed lot descriptions available Monday, Aug. 12
Click on link to see parts room


Parts room

538

Electric Motor
High Efficiency 30 HP, 1775 RPM Electric motor

654

Detailed lot descriptions available Monday, Aug. 12
Click on link to see parts room 


Parts room

539

655

Detailed lot descriptions available Monday, Aug. 12
Parts room


Click on link to see video

540

656

Detailed lot descriptions available Monday, Aug. 12
Click on link to see parts room.  Belts

parts room- belts

541

Log Chain, 81X Chain
Pallet of lug china, 81X chain

542

Electric Chain Hoist
5 Ton Electric Chain Hoist

818

Large Socket set in parts room
Large Socket set

543

Loader steps
Pallet of Loader Steps

544

Roller cable chain and misc
roller cable chain and misc

545

Logging Choker cables
Several Logging choker cables

546

Hammer for Hog
Box of Hammers for Hog

547

Lot of Misc
Lot of Misc.

548

SM-CYCLO Gearbox
SM-CYCLO Model CHHS-61704-29; 29 Ratio

549

SM-CYCLO Gearbox
SM-CYCLO Model CHHS-61604-29, Ratio 29

550

Speed Reducer Gearboxes
(3) Speed Reducers

551

Cylinders for Nicholson
(2) Cylinders for Nicholson 1 new, 1 used

552

strappng carts
(2) strapping carts

553

WH78 chain
WH78 Chain Approx. (34) 10' sections BRAND NEW!

554

Rolls
(4) 24"x8" Rolls and 38"x6" rolls

556

Rolls
(3) 51" Rolls

557

Hose
lot of hose

558

Belting
(9) 5" Belts for A-20 Planner

559

Light Bulbs
(4) Boxes of Light Bulbs

560

Antifreeze
(3) 5 Gallon of Tanner Antifreeze

561

Electric Motor and Drives
Motor and Drives used

562

Generator
Gas Powered Generator/ condition unknown

563

Hydraulic Cylinders
(2) 30'x2" Hydraulic Cylinders

564

Siemans 200 amp switch
Siemens 200 amp switch

565

New Traveling cable chains
Box of new traveling cable chains

566

Pipe Threader
rigid 1822-1 Powered Pipe Threader

567

Pipe Bender
(2) Hand Pipe Binder

568

Pipe Threading set with stand
Ridgid Pipe Threading set with stand

569

Mechanical Bender
Green Lee 1800 Mechanical Bender for 1/2 to 1" pipe

570

pallet of broom, shovels and rakes
pallet of brooms,shovels and rakes

571

Heaters
Lot of Heaters

572

Sprockets
(3) 20" Sprockets

573

Chain
Summit DF3500 Chain Approx. 200'

574

575

Bar and chain oil
(6) Case of 3 Gallon each Loggers Pride Bar and Chain Oil

576

Inverter Contrl for Band Mill
ABB Inverter Control for Band Mill Rebuilt by ABB.

577

578

578A

Werner Aluminum Extension Ladder
28'

578B

Werner Aluminum Extension Ladder
24'

578C

Davidson Step Ladder
8'

647

Wear Plate Located in Small Building Attached to the Building with the Drying Sticks
Lots of sizes, up to 1 1/4” thick, 7- sheets plus a lot of cut pieces

648

Craftsman Tool Box, Bolt Bin and Everything In Small Storage Shed Under Debarker Cab
Tool box is loaded with socket sets, torque wrench, tap and die set, lot of misc. maintenance supplies

649

Augers, Shafts, Rollers and Steel Plates
Everything outside of the parts room, including 5- 12” x 12’ augers, lots of shafts ranging from 1 15/16” to 2 15/16” diameter, AR plate for the log troughs

650

Parts Room to be offered on Thursday on at noon
Here is your opportunity to buy the complete parts room. If opening bid is made on it of $50,000 it will be sold as an entirety, if not it will be offered piece meal on Friday. 

 

750

Miller Bobcat 225NT Welder Generator
1459 hours, 8000 Watt Generator, with leads , mounted on steel skids, in good working condition

751

bolt bin and contents in Parts Room
bolt bin and contents of nuts and bolts

752

bolt bin and contents in Parts Room
bolt bin and contents of small pipe fittings

753

Lawson Cabinet and contents Parts Room
Lawson 16 Drawer Cabinet and Contents, air braket hnge, snap rings, set screws

754

Lawson Cabinet and contents Parts Room
Lawson 16 Drawer Cabinet and contents, terminal ends, flat sockets, cap screws

755

bolt bin and contents in Parts Room
bolt bin an contents as marked ; nuts and bolts Total 3 rows of bins

756

air fliters in Parts Room
all air filters on top of shelf as marked

757

brake and loader parts in Parts Room
two shelves as marked of brake and loader parts

758

pipe fittings, nuts and bolts in Parts Room
bottom 4 shelves as marked of pipe fittings, nut and bolts

759

oil filters in Parts Room
5 shelves as marked mostly oil filter

760

oil filters in Parts Room
5 shelves as marked mostly oil filter

761

air filters in Parts Room
top of shelf of air filters

762

oil filters in Parts Room
3 shelves as marked mostly oil filters

763

equipment parts in Parts Room
3 shelves as marked equipment parts

764

misc parts in Parts Room
4 shelves as marked of misc. parts

765

contents of shelves in Parts Room
3 shelves as marked

766

bearings in Parts Room
2 shelves of bearings

767

Black Hawk Transmission Jack in Parts Room
Black Hawk Transmisison Jack

768

OTC floor jack in Parts Room
OTC floor jack

769

torch cart and hoses in Parts Room
torch cart and hoses

770

torch cart and hoses in Parts Room
torch cart and hoses

771

torch cart and hoses in Parts Room
torch cart and hoses

772

RobinAir Air condtioner charger in Parts Room
RobinAir Air Conditioner charger

773

battery jump cart in Parts Room
battery jump cart

774

grease gun and gear oil in Parts Room
Grease gun and gear oil

775

grease gun and grease in Parts Room
grease gun and grease

776

mud flaps in Parts Room
mud flaps

777

parts washer in Parts Room
parts washer

778

NEW motors in Parts Room
(2) Tech 10 hp motors NEW

779

floor jack in Parts Room
floor jack

780

floor jack in Parts Room
floor jack

781

floor jack in Parts Room
floor jack

782

steel pipe and flat iron in Parts Room
lot of steel pipe and flat iron

783

Tire Changing Machine in Parts Room
Coats 30; 30 air flat tire changing machine

784

gas cans and sprayers in Parts Room
gas cans and sprayers

785

Rachet straps in Parts Room
lot of rachet straps

786

shop vac and rag cans in Parts Room
pallet of misc to include shop vac, rag cans

787

Bungee straps in Parts Room
box of bungee straps 41"

789

heaters and fans in Parts Room
pallet of heaters and fans

790

Truck rims in Parts Room
4' truck rims

791

Misc Chain in Parts Room
pallet of misc chain

792

electric oil pump in Parts Room
electric oil pump

793

gas cans and sprayers in Parts Room
pallet of gas cans

794

roll of copper wire in Parts Room
roll of copper wire

795

pallet of misc in part room
pallet of misc

796

Hi Temp Multi purpose Grease in part room
13 case of Hi Temp Multi purpose grease

797

Citco Premium Gear Oil Parts Room
Sealed barrel of Citco Premium gear oil 85W-140

798

Extreme Blue windshield fluid in Parts Room
2 cases of 12 Gallons Extreme Blue -20 Windshield Fluid

799

motor jack in Parts Room
motor jack

800

factory cart in Parts Room
factory cart

801

Tote DEF Suzzara Blue with Electric pump in Parts Room
Tote DEF Suzzara Blue with Electric pump, just under half ways full

802

55 gallon of EP 150 Gear lube in parts room
55 Gallon Barrel of EP 150 Gear Lube

802A

55 Gallon Barrel K1/Kolene Petroleum in parts room
55 Gallon Barrel K1/Kolene Petroleum, sealed with heat damage to the seals

802B

55 Gallon Barrel K1/Kolene Petroleum in parts room
55 Gallon of automatic transmission fluid, sealed with slight heat damage to seals

802C

Barrel of Premium Blue AW150 Hydraulic oil in parts room
Barrel of Premium Blue AW150 Hydraulic Oil, full but main seal is broken

802E

Barrel of Premium blue AW150 Hydraulic oil in Parts Room
Barrel of AW150 Hydraulic Oil, full but main seal is off

802F

Barrel of Hydraulic Oil in parts room
Barrel of Hydraulic Oil, 7/8 full

802G

Barrel of AW68 Hydraulic Oil in parts room
Barrel of AW68 Hydraulic Oil, approx halfways full

802H

Barrel of Hydraulic Oilin parts room
Barrel of Hydraulic Oil, full but seals are off

802I

Barrel of Pacemaker 68 Hydraulic Oil in parts room
Barrel of Pacemaker 68 Hydraulic Oil, full with seal but seal has slight heat damage

803

4 shop built stands in parts room
4 shop built stands

804

Stanley Wheel Barrow in parts room
Stanley Wheel Barrow

804A

wheel barrow in parts room
Wheel Barrow

804B

wheel barrow in parts room
Wheel Barrow

804C

wheel barrow in parts room
Wheel Barrow

804D

wheel barrow in parts room
Wheel Barrow

804E

wheel barrow in parts room
Wheel Barrow

805

Norco 1 ton wheel dolly in parts room
Norco 1 ton wheel dolly

806

pallet of hoses and extension cords in parts room
pallet of hoses and extension cords

807

gas powered water pump in parts room
gas powered water pump

808

water hoses and torch hoses in parts room
water hoses and torch hoses

809

barrel dolly in parts room
barrel dolly

810

Husqvarna 3100 PSI pressure washer- gas in parts room
Husqvarna 3100 PSI pressure washer- gas

810A

strapping cart in parts room
strapping cart

811

Craftsman 10" table saw in parts room
Craftsman 10" table saw

812

oil cart and pump in parts room
oil cart and pump

813

pallet of new and used starters in parts room
pallet of new and used starters

814

pallet of misc in parts room
pallet of misc

815

stainless steel cart and contents in parts room
stainless steel cart and contents

816

Meritor BRK08489038 Brake Shoes in parts room
Meritor BRK08489038 Brake Shoes

817

2 cases of heavy duty 15W-40 Oil Total of 24 quarts in parts room
2 cases of heavy duty 15W-40 Oil Total of 24 quarts

819

remainer of pallet not already sold in parts room
remainder of pallet not already sold. Misc. tools

820

30 ton air operated jack in parts room
30 ton air operated jack

821

Barrel Grease EPNLG12 in parts room
Barrel Grease EPNLG12, full and good

822

jack stands and jacks in parts room
jack stands and jacks

823

(6) 5 gallon of gear lube in parts room
(6) 5 gallon of gear lube, 5 are sealed and full

824

5 gallon Volvo Automatic Transmission Fluid and 5 gallon Volvo Break Fluid in parts room
5 gallon Volvo Automatic Transmission Fluid and 5 gallon Volvo Break Fluid, full and sealed

825

13 cases of Proline Auto Transmission Fluid 13 cases in parts room
13 cases of Proline Auto Transmission Fluid 13 cases

826

case of brake and parts cleaner in parts room
case of brake and parts cleaner

827

desk, chair and 2 filing cabinets in parts room. Not to include owner's manuals
desk, chair and 2 filing cabinets. Does not include owner's manuals

827A

Owners Manuals
.

828

8'- ladder in parts room
8- ladder

829

42" shop fan in parts room
42" shop fan

829A

42" shop fan in parts room
42" shop fan

829B

42" shop fan in parts room
42" shop fan

829C

42" shop fan in parts room
42" shop fan

829D

42" shop fan in parts room
42" shop fan

829E

42" shop fan in parts room
42" shop fan

829F

42" shop fan in parts room
42" shop fan

829G

42" shop fan in parts room
42" shop fan

830

Hydraulic Press in parts room
Hydraulic Press

831

Ingersol Rand Impact Wrench in parts room
Ingersol Rand Impact Wrench

831A

Ingersol Rand Impact Wrench in parts room
Ingersol Rand Impact Wrench

831B

Ingersol Rand Impact Wrench in parts room
Ingersol Rand Impact Wrench

831C

Ingersol Rand Impact Wrench in parts room
Ingersol Rand Impact Wrench

832

Impact Wrench sockets in parts room
Impact Wrench sockets

833

Large Socket set in parts room
Large Socket set

834

truck tire cage model 2240 in parts room
truck tire cage model 2240

835

pallet of reel copper wire, jack, cable and cooler in parts room
pallet of reel copper wire, jack, cable and cooler

836

micro model M076 wheel balancer in parts room
micro model M076 wheel balancer

837

bead setter in parts room
bead setter

838

lot of hand tools in parts room
lot of hand tools

839

contents of steel table, lot of tools in parts room
contents of steel table, lot of tools

840

3'x5' steel table with vise in parts room
3'x5' steel table with vise

841

bolt and bin contents in parts room
bolt and bin contents

842

Packard Drill press in parts room
Packard Drill press

843

contents on and under steel table in parts room
contents on and under steel table

844

3'x5' steel table with vise in parts room
3'x5' steel table with vise

845

rotating bin and contents in parts room
rotating bin and contents

846

Miller Dialarc 250 AC/DC welder with leads, stand and contents in parts room
Miller Dialarc 250 AC/DC welder with leads, stand and contents, good working condition

847

Napa 6/12 volt battery charger in parts room
Napa 6/12 volt battery charger

848

Mitre Band Saw model 1600 metal cutting band saw in parts room
Mitre Band Saw model 1600 metal cutting band saw

849

bolt bin with fittings and paint bin in parts room
bolt bin with fittings and paint bin

850

2 metal bins trailer lighting in parts room
2 metal bins trailer lighting

850A

Rebuild Kit for Detroit Engine
.

851

pallet of 11 five Gallon Buckets gear oil in parts room
11 Buckets of gear oil, all sealed and full

852

24 cases anti freeze concentrate in parts room
24 cases anti freeze concentrate

853

11- 92"x44' screen tarps in parts room
11- 92"x44' screen tarps

854

pallet 9 cases anti freeze and windhshield washer fluid in parts room
pallet 9 cases anti freeze and windhshield washer fluid

855

12 cases auto transmission fluid in parts room
12 cases auto transmission fluid

856

(5) 11R22.5 Tires in parts room
(5) 11R22.5 Tires

857

7.50-16 tire and 7.00-1 tire in parts room
7.50-16 tire and 7.00-1 tire

858

(5) 12-00020 heavy duty forklift tires NEW in parts room
(5) 12-00020 heavy duty forklift tires NEW

859

(5) 11R24.5 Tires NEW in parts room
(5) 11R24.5 Tires NEW

860

(5) 11R22.5 Tires NEW in parts room
(5) 11R22.5 Tires NEW

861

(5) 11R22.5 Tires NEW in parts room
(5) 11R22.5 Tires NEW

862

(5) 11R24.5 Tires NEW in parts room
(5) 11R24.5 Tires NEW

863

4 Wrangler 275/65/R18 Tires Used in parts room
4 Wrangler 275/65/R18 Tires Used

864

(5) 11R22.5 Tires with rim NEW in parts room
(5) 11R22.5 Tires with rim NEW

865

(5) 11R22.5 Tires NEW in parts room
(5) 11R22.5 Tires NEW

866

(5) 11R22.5 Tires NEW in parts room
(5) 11R22.5 Tires NEW

867

(4) 11R24.5 Tires NEW in parts room
(4) 11R24.5 Tires NEW

868

(5) 11R22.5 Tires NEW in parts room
(5) 11R22.5 Tires NEW

869

(1) 14.00-20 Tire NEW in parts room
(1) 14.00-20 Tire NEW

870

(4) 11R24.5 Tires NEW in parts room
(4) 11R24.5 Tires NEW

871

pallet of air filters in parts room
pallet of air filters

872

pallet of air filters in parts room
pallet of air filters

873

16 cases of 15W-40 oil in parts room
16 cases of 15W-40 oil

874

3 cases of 10W-30 motor oil in parts room
3 cases of 10W-30 motor oil

875

pallet of 21 cases of anti freeze concentrate in parts room
pallet of 21 cases of anti freeze concentrate

876

pallet mixed 10W30 , Brake cleaner, brake fluid, 10W40 motor oil, auto transmission fluid in parts room
pallet mixed 10W30 , Brake cleaner, brake fluid, 10W40 motor oil, auto transmission fluid

877

pallet of anitifreeze in parts room
pallet of anitifreeze

878

verticle air tank in parts room
verticle air tank

879

Speedway air tank in parts room
Speedway air tank

880

V-belts on the wall in parts room
V-belts on the wall

881

Gates Hydraulic hoses stations, press, dies, saw, hoes and hyd. Fittings as marked in parts room
Gates PC 707 Hydraulic hoses station, press, dies, saw, hoes and hyd. Fittings as marked. COMPLETE SETUP!!

882

wood shelf and contents in parts room
wood shelf and contents

883

Lawson 3 drawer cabinet, bin and contents as marked in parts room
Lawson 3 drawer cabinet,mostly hyd hose fittings , bin and contents as marked

884

metal table and contents in parts room
metal table and contents

885

hydraulic press in parts room
hydraulic press

886

22 ton floor jack in parts room
22 ton floor jack

887

tools in corner as marked in parts room
tools in corner as marked

889

wood cabinet and contents in parts room
wood cabinet and contents

890

BelAir 7.5 HP verticle tank mount air compressor in parts room
BelAir 7.5 HP verticle tank mount air compressor

891

(3) Torpedo heaters in parts room
(3) Torpedo heaters

892

(2) kerosene heaters in parts room
(2) keorsene heaters

893

approx 60 bags of multi purpose absorbant in parts room
approx 60 bags of multi purpose absorbant

894

12' hydraulic cylinder in parts room
12' hydraulic cylinder

895

(3) trailer level jacks in parts room
(3) trailer level jacks

896

contents of room not already sold in parts room
contents of room not already sold

897

(3) 30.5 R25 NEW Loader Tires in parts room
(3) 30.5 R25 NEW Loader Tires

897A

skidder tire
.

898

Lot of misc used tires in parts room
Lot of misc used tires

899

misc steel, I beams, galvinized steel panels shafts
behind garage

899A

blower feeding augar
and belt covney 8'x18" belt

899B

cummins diesel engine for parts
.

899C

Back gate door for van trailer
.

899D

Truss Beams for metal pre-fab building
.

899E

Steel pipe and tank
.

899F

Steel chain
.

899G

Sullair 16-75l Air compressor for parts
.

899H

misc steel, racks, beams, lumber carts, I-beams
behind garage

900

2012 Volvo L120G Wheel Loader
2012 Volvo L120G Wheel Loader Rubber Tire Articulating wheel loader  (Y25) S#30390; 23.5R25 Tires 80-90% rubber, Air condition cab quick couple ; meter reads 9677 hours

901

2010 Volvo L90F
2010 Volvo L90F Wheel Loader (Y18) PIN *VCE0L90FA00027500*articulating rubbe tire loader with enclosed air conditioned cab.  meter reads 10,208 hours, quick couple, 20R25 Tires at 60%

902

2005 Volvo L90E
2005 Volvo L90E Wheel Loader ( Y1) S#L90EV67288; rubber tire loader with enclosed A/C cab meter reads 3,967 hours , quick couple with 20R25 Tires at 60%, low hrs.!

903

Volvo 6' Bale Type Forks
Volvo 6' Bale Type Forks (s# 11156050) Quick Couple

904

Volvo 5' Bale Type Forks
Volvo 5' Bale Type Forks Quick Couple Model 8083 (s#33095-169)

905

Volvo High Lift Quick Couple Bucket
Volvo Quick Couple Bucket 102" wide 62" tall

906

Volvo 6' Bale Type Forks
Volvo 6' Bale Type Forks, Quick Couple (s#17805)

907

Volvo 5' Bale Type Forks
Volvo 5' Bale Type Forks, Quick Couple

907A

1985 Cat 926
1985 Cat 926 /v# T21 S#94Z01729;  articulating rubber tire loader with an enclosed cab, meter reads 36,004 hrs., 17.5R25 Tires with 50%, lumber forks with bale clamp

907B

Volvo 120 log clamps
Volvo 120 quick couple log clamps Model 80835 Serial 102 10185

907C

Bucket
Bucket for forklift

907D

Lumber forks
Lumber forks for loader

907E

Allis-Chalmers Wheel Loader*
Yr Late 70s/ early 80s, Model # 1095460, Ser# 940-1191, 7784 hrs, 3 tires @ 20% ,1tire @50%, Good working Condition

907F

Forks*
For the Allis Chalmer Wheel Loader

908

2017 Taylor X360M Forklift
2017 Taylor X360M Forklift S#SGE41433 Bought new in 2018. Always stored inside. 36,000 lb. lift capacity,  8'x12'' self positioning forks, 14' Mast, load level, see through mast, 2550 total hours, 608 idle, joy stick controls, enclosed Air conditioned cab, dual 12.00-20 Tires @ 90% LIKE NEW! 

909

Kalmar Forklift
Kalmar DCG127-6 Forklift, (sn: S40400052) , 7131 hours, 8' Forks See Through Mast, 13' Mast, Load Leveler, Self Positioning forks, Duel 12.00-20 Tires. Cummins Model Q586.7 Engine Tires 80%

910

2000 Taylor THD 300S
2000 Taylor THD 300S forklift (Y26) S# T3-28860. 30,000 lb. capacity, 12' Mast, Self Positioning 8' forks, see through mast, 12.00-20 tires, 30%, Cummins Engine, meter reads 23,275 hours

911

1998 Taylor THD 300S
1998 Taylor THD 300S (Y17) S#-T3-27465  meter reads 19,889 hrs.  30,000 lb forklift with 8'x12" forks, 14' Mast, side shift, load leveler, see through mast, dual 12.00-20 ties @ 40%.  Cummins Engine.

912

Taylor 300 Eagle Forklift
Taylor 300 Eagle Forklift Model TE-3--5, 8' Forks, 15' Mast, Self Positioning, Load Leveler, Dual 12.00-20 Tires 70% Cummins Engine, Enclosed Cab, A/C, meter reads 9680 hours

913

Taylor TE 300M Forklift
Taylor TE-300M, 30,000 lb forklift (sn: S-H^-24501) 8' forks, side shift, 14' Mast, see through mast, meter reads 8106 hours, Cummins Engine, 12.00-20 Tires @ 40-50% with 1 slick tire on the rear 

914

Hyster Model H360HD2 Forklift
Hyster Model H360HD2 36,000 lb Fork Lift, (sn: J019E02115) 8' self Positioning Forks, See through mast,meter reads 12,260 hours, 12.00-20 Tires at 10% Cummins Engine

914A

Linde H136 Forklift
SN: 35H051011136, 8' Forks, Side Shift, See Through Mast, Self Positioning Forks, 8.3 Cummins Engine DR109, Dual 12R20 Front Tires, 12.00 Back Tires, meter reads 20,547 hrs, new batteries,  rebuilt starter,  runs very good. Tires @ 50%
Located at 8482 US 221 North Marion NC.

915

Case Forklift
Case 586G Big Wheel Forklift, 4' Forks, side shift, 11' Mast, See through mast, meter reads 7,447 hours, 8,000 capacity, 

916

2010 Toyota Forklift
2010 Toyota Forklift (Y25) S#70559  7700 lb capacity Forklift, 4' forks, side shift, Toyota 152 Diesel Engine, meter reads 7,888 hours NOTE: This forklift will be reserved for one week for load out if possible. 

917

2015 Barko 495ML Knuckleboom Loader
2015 Barko 495ML Knuckleboom Loader (Y29) mounted on Jewell LTC 6600 all terrain self propelled carrier.  Has Rotobec continuous rotating grapple, enclosed air conditioned cab . meter reads 5,517 hours, Cummins Engine.   S#11549524243,  Excellent condition. WOW!

918

2015 495B Barko Knuckleboom Loader
Barko 495B Knuckleboom Loader Mounted on a Jewell Self-Propelled Carrier. Rotobec continuous Rotating Grapple, Enclosed Air conditioned cab, Cummins Engine, excellent con.  meter reads  2,783 WOW!

918A

2012 595 Barko Knuckleboom
595 ML Magnum, Big John Trailer, meter reads 8201 hrs, 6 cycle Cummins, Continuous Swivel Grapple, Rebuilt Grapple, New Battery, Bucksaw Hookup, Delimber Hookup, Replaced Hoses, Went Through Complete Unit, Good Solid Machine!!

919

2006 Prentice 384 Knuckleboom
2006 Prentice 384 Knuckle boom S#384P57763, very nice clean machine,  Cummins engine, enclosed cab, joy stick controls, meter reads 6,608 hours mounted on CTR tailer model D-18 has CTR Delimber and shlasher saw mounted.  Model 400 Tires 11R22.5 60% 

919A

919B

CTR 42 BuckSaw
18' frame, Completely Rebuilt, Very Nice!

919C

CSI Delimber
Flail Chains, Hyd outriggers, Good Working Condition

919D

Buck Saw
.

920

2004 John Deere Skidder 648 G3 JD
2004 John Deere 648 G3JD Skidder S#DW648GX589013 ,5447 hours, Grapple skidder with John Deer Engine.  30.5-32 Tires, 30-40%.   Has Cable winch, enclosed air conditioned cab.  Hours information coming soon. 

921

1985 240 Timberjack Skidder
1985 240 Timberjack Skidder S#845641  Model 240GSEAX  Cable Skidder, Detroit Engine, Gearmatic Winch, meter reads 2,259 hrs. 23.1-26 Tires at 30-40%

922

2000 Bobcat #751
2000 Bobcat Skid Steer (Y9) S#515730037  with bucket, meter reads 7,077 hours.  Kubota model V1903. Deisel Engine, 10-16.5 Tires with 70%

923

CTR 260 Stumper
Ser# 0009, meter reads 10,449 hrs, 4 cycle Deutz Engine, Dangle Head Bar Saw, Tire Chains Sell Seperate, Good Working Condition

924

Tire Chains
23-1-26 Chains, Good Condition

924A

Tires
34.5 32, Rough condition

925

2014 Volvo VNL64T300
2014 Volvo VNL64T300   vin: 4V4NC9EH5EN164178  Model D13 425 HP Eco Troque Engine.  Volvo Automatic Transmission with day cab.  (350,950 miles) tires at 80% 

*ak

926

2014 Volvo VNL64T300
2014 Volvo VNL64T300  Vin: 4V4NC9EH7EN164179; 280,000 miles; Model D13 425 HP Eco Troque Engine.  Volvo Automatic Transmission with day cab, tires at 80%

927

2013 White Mack CXU613
2013 White Mack CXU613 Vin: 1M1AW07Y2DM034633; 330,000 miles, 10 speed manual transmission, Mack model MP8- 445C engine

928

2000 Red Mack #8 CH 613
2000 Red Mack #8 CH 613 vin:1M1AA18Y8YW124303
427 Mack Engine, Fuller 10 speed transmission.  Showing 48,325 miles assumed to have rolled over.  Tires mixed condition.  Over all 40-50%

929

1995 Red Mack #4 CH 613
1995 Red Mack #4 CH 613 vin: 1M1AA13YO5W044542
sleep cab; showing 279,815 miles 

930

1986 Blue Mack #5 R688ST
1986 Blue Mack #5 R688ST  VIN: 1M2N187Y1GA013689  Showing 462,000 miles, 40 % tires

931

1991 Kenworth Truck
T800 KW, 430 Detroit Diesel Engine, 681408 miles, 13 Speed Transmission, Tires 85%, 2- New Airbags, 4-New Shocks, New Front End, Nice Clean Truck!!

932

30' Logging Bridge
30' logging Bridge

932A

1982 Yellow Mack Truck
1M2N187C3CA003275  DOES NOT RUN

932B

1990 Gray Mack for parts
VIN: 1M2AA06Y8LW001263 No title

932C

1987 Red Mack for parts
VIN: 1M2N187Y6HA018906

932d

1990 Red Mack for parts
VIN: 1M2AY04Y8LM006103 No title

932E

24’ Logging Bridge
.

933

Ottawa Switch Truck
1993 Ottawwa Switch Truck SN: 68713-
NO TITLE Selling with Bill of Sale Only

934A

DM-600 Mack Dump Truck*
Model DM607S, Ser# 7507, mileage shows 28322 assuming 1028322 is correct, no title, Good Tires, Working Condition

934

Ottawas Switch Truck
1986 Ottawas Switch Truck SN: 48202133
NO TITLE Selling with Bill of Sale Only

934B

2000 GMC School Bus*
Blue Bird, VIN 1GDL7TK1XJ519206, Miles 208486, title Good working Condition

935

2017 Utility Flat Bed Trailer
2017 48' Utility Flat Bed Trailer 1UYFS2481H5095006
Aluminum with 11R22.5 Tires, Spread Axle with Straps, Tires 20% Tires

936

2017 Utility Flat Bed Trailer
2017 48' Utility Flat Bed Trailer 1UYFS248XH5095005
Aluminum, 11R22.5 Tires 50% 

937

2017 Utility Flat Bed Trailer
2017 48' Utility Flat Bed Trailer 1UYFS2488H5095004
20%, all but 2 tires are at 60% those 2 are at 10%

938

2006 Fontaine Flat Bed Trailer
48' SN: 13N14830261538037  Spread Axle with straps, Tires 30%

939

2005 Utility Flat Bed Trailer
2005 48' Utility Flat Bed Trailer 1UYFS24865A596105
Aluminum with 11R22.5 Tires, Spread Axle with Straps, Tires 30% Tires

940

2000 Utility Flat Bed Trailer
2000 45' Utility Flat Bed Trailer 1UYFS2450YA383306
Tires at 60-70%

941

1973 Fontaine Flat Bed Trailer
40' Flat bed (VIN: 16707) no title

942

1978 Great Dane Flat bed
VIN: 18850) located in tree line No title

943

1984 Great Dane flat bed trailer
VIN: 1GRDM9028EM32812 No title

945

2014 Peerless Chip Trailer
45' open top with chip tarp , Peerless Chip Trailer 1PLE04526EPK58867

946

2014 Peerless Chip Trailer
45' Peerless Open Top Chip Trailer with tarp 1PLE04524EPK58866

947

2014 Peerless Chip Trailer 42' Open top
2014 Peerless open top Chip Trailer 45' 1PLE04522EPK58865 with tarp

948

2000 Peerless Chip Trailer
2000 Peerless Chip Trailer 1PLE04225YPA 28068
42' Open top with tarp

948A

2000 Peerless Chip Trailer
42' Open top Peerless Chip Trailer with tarp 1PLE04223YPA28070

949

2000 Peerless Chip Trailer
2000 Peerless Chip Trailer 1PLE04227YPA28069   42' Open top

950

2000 Peerless Chip Trailer
2000 Peerless Chip Trailer 1PLE04227YPA28072   42' Open top

951

2000 Peerless Chip Trailer
2000 Peerless Chip Trailer 1PLE04225YPA28071  42' Open top

952

1974 Gindy Chip Trailer
1974 Gindy Open Top Chip Trailer 42' 104004M

953

1998 Mulch Trailer with Live Floor
1998 Mulch Trailer with Live Floor 1PLD04224WPJ25613,   42' open top

954

1980 Strickland open top van
40' open top van   (VIN: 244058  )

955

1980 Strickland Open Top Trailer
1980 Strickland 40' Open Top Trailer 243955

956

1986 Trailmobile open top van
11R22 tires with 40% located near planer mill (VIN: 1PT011BJ0G9010624)

957

1974 Gindy 40' open top van
40' open top van model EF2F440B59 with 11R24 tires at 40% (VIN: 103959M)

958

1992 Kend Yard Trailer
1992 Kend 40' Open Top Yard Trailer 1JJV4525NK091248

959

1963 Fruehauf Open top van
40' open top van (Vin: MED277310)

960

1986 Trailmobile open top van
40' open top van (VIN: 1PT011BJ0G9010607)

961

1980 Strickland open top van
(sn: 245249) 40' open top van with 11R22.5 tires with 30% located near planer mill

962

1976 Trailmobile Open top van
40' open top chip van 11R22 Tires (VIN: D31BN68902)

963

1963 Fruehauf Open top van
40' open top van (VIN: MED277327) with 11R22 Tires all but 1 tire at 40% that 1 is busted

964

1978 Bud 40' Open top van
40' open top van (VIN: 152124M) 11R22 tires at 20% located near chipper No title

965

1975 Gindy 40' Open top van
40' open top van (VIN: 121115M)

966

Stickland 40' Open top van
40' open top van (no VIN plate available) 11R22 30% No title

967

1992 Kent open top
40' open top van with complete deteroration of floor (VIN: 1KKVA4526NL091257)

968

1986 Trailmobile open top van
40' open top van, 11R22 Tires

969

Gindy Closed top van
Gindy 40' closed top van (VIN: not available) lot includes the contents of warehouse lights.

969A

40' Trailmobile open top van
11R22 tires. (VIN: plate missing) No title

969B

Trailmobile closed top van
(VIN: plate not available) No title

969C

1966 Trailmobile closed top van
(VIN: 031A1SAHC33015) lot includes the contents of warehouse lights No title

969D

1979 Bud Open top
40' open top (SN: 171955M)

969E

1979 Bud Open top
40' open top (SN: 171908M) No title

969F

1992 Trailmoblie open top
40' open black top. (VIN:1PT031BH8N9007989) No title

969G

Trailer parts, axile, fuel tank
in woods No title

969H

Gindy Closed top van
40' closed top van (tag on trailer 350746) No title

969I

Fruehauf Closed top van
40' closed top van (sn: 110496) No title

969J

Dorsey closed top van
40' closed top van ( D-10030-BF8) No title

969K

Trailmoblie 40' closed top van
(plate missing) No title

969L

1980 Strickland open top van
40' open top (SN: 245275)

969M

1980 Strickland open top van
40' open top (SN: 241640)

970

2018 Pitt Log Trailer
2018 Pitts Model LT42-L Double Bunk Log Trailer 42' ,sn: 5JYLT4221JPP11856  

971

1992 Evans Log Trailer
1992 Evans Log Trailer HI-16-42P, 1J9G142B5N6003275 42'

972

1966 Dixie Log Trailer
1966 Dixie Log Trailer 5121, 38'

973

1987 Thay Log Trailer
1987 Thay Log Trailer 18ATD8022HS110190, 46'

974

1987 Pitt Logg Trailer
1987 Pitt Logg Trailer PE9LT40T3HP985022, 40'

974A

97 Pitts Log Trailer*
LT42, 8" Recess center, was running everyday, Good working Condition

975

1968 Roger Lowboy Trailer
1968 Roger Lowboy Trailer R2622

985

2013 Chevrolet Silverado
vin: 1GCRKSE73DZ328890   Extended Cab 4 door with approx. 208,000 miles  Automatic Transmission, auto seats and windows, 

986

2012 Chevrolet Silverado White
Vin: 1GCNKSE02CZ149482     White two door with automatic transmission, auto seats and windows.  approve 106,000 miles

987

1999 Trailblazer
Vin : 1GCEK14T3XE221812  178 249 miles, Automatic transmission, auto windows and seats.  

988

1999 Chevrolet Truck
Vin: 1GCEK14T3XE221812 (347,638 miles)

989

1999 Chevrolet Suburban
vin: 3GNGC26F1XG157692; 278,981 miles

990

1998 Chevrolet S-10 pick up truck
Vin : 1GCCS1444WK198394. Manual Transmission, 5 speed, Manual windows showing 217,761 miles.  

991

1995 Chevrolet truck
Brown truck (VIN: 1GCEK14K2SZ103954) with automatic transmission, 4 wheel drive, 422,397 miles

992

1985 Jeep Cherokee
Blue Jeep Cherokee (VIN: 1JCWL781XFT056167) manual transmission, 108,130 miles tires at 60%, V-6/ 2.8 liter Engine. RUNS

993

1985 Chevrolet Service Truck
(VIN: 1GCGC24J2FF378962) showing 39,000 assumed to have turned over, manual transmission. Said to run.

994

1974 GMC Ton water truck
VIN: TCE614V5A4919- DOES NOT RUN miles unknown/ 6000 V* Engine No title

995

1992 Chevrolet S10 truck white
VIN: 1GCCS14A9N8185254 DOES NOT RUN

996

1997 Chevrolet Suburban red
VIN: 1GNGC26F5UJ306505 DOES NOT RUN

997

1979 Jeep Cherokee brown
VIN: J9F18NC050256 DOES NOT RUN

998

1950 Allis Chalmers HD6 Dozer with tilt blade and winch
drove it to where it is sitting