Covina Automotive Auction
Previous Page Listing ID#: 219559

Auction Location

West Covina, CA 91723
Auction Dates and TimesSALE IS COMPLETED
Bidding Starts: Tuesday Jul 28
Bidding Ends: Saturday Aug 22
Auction Type
 Online Auction  VIEW ONLINE CATALOG
Company Information
Precision Warehouse

Phone: 805-835-7085
Email: info@precisionwarehouse.com
Website: precisionwarehouse.com/

GoToAuction.com ID#: 7166
View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area!  You may set up alerts by area (zip and radius), keywords, and by company.  It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
All Lots – AS IS WHERE IS. All lots are available for inspection prior to bidding on preview days stated No guarantees or warranties of any kind. Removal Assistance: Winning bidders are solely responsible for the removal of purchased items and must bring their own help and tools for item removal. ITEM REPRESENTATION– Descriptions, photos and any other information given by Precision Warehouse or one of its agents, is solely for informational purposes. Precision Warehouse is not responsible for inaccurate photos, descriptions or information, verbal or implied. Bidders are encouraged to view items in person and to do their own research prior to bidding. All items in the Auction are sold "As Is", "Where Is" with no warranty expressed or implied, unless otherwise notated. By placing a bid, you agree to hold Precision Warehouse and its agents harmless of any wrong doing. LIABILITY–View and bid at your own risk. Precision Warehouse is not responsible for injury or damage of any kind, to anything or anyone, while previewing, bidding, loading out, or conducting business. Additionally Precision Warehouse is not responsible for injury or damage of any kind to anyone or anything relating to items obtained from Precision Warehouse By placing a bid, you agree to hold Precision Warehouse and its agents harmless regardless of opinion. During preview and loadout bidders are responsible for any damage to the premises of any kind for any reason. NOTICE OF RESERVE- Pursuant to UCC§ 2-328 and individual state law, notice is hereby given that in the event of a reserve, Precision Warehouse or its affiliates may implement such reserve by bidding on behalf of the seller, whether by opening bidding or continuing bidding in response to other bidders until reaching the reserve. If we have an interest in an offered lot and the proceeds there from other than our commissions, we may bid in the same manner therefore to protect such interest. Internet Premium: 15% Sales Tax : 7.75% - Sales tax applied to Hammer Price. Participation Requirements: Valid Credit Card required for bidding approval Payment Options: Visa, MasterCard, Discover, American Express, and Pay Pal Visa MasterCard Discover American Express Payment Instructions: Your Credit Card On Fie Will Be Charge May 19th @ 2:pm, If You Wish To Use Another Method Of Payment Please Contact Precision Warehouse (805-835-7085). Bidder is responsible for shipping. Currency Type: USD Shipping Instructions: Please contact Precision Warehouse for general shipping and handling information. Precision Warehouse SERVICE TERMS AND CONDITIONS ACCEPTANCE OF TERMS Precision Warehouse/Sebae Data Solutions, (the makers of Auction Flex & HiBid (formerly Bidopia) hereafter referred to as "Sebae"), provides its service to you, subject to the following Terms & Conditions ("TAC"), which we may update from time to time without notice to you. The most current version of the TAC can be found found at any time by visiting the link: http://www.auctionflex.com/showtandc.ap USE AND REGISTRATION Our services are available only to, and may only be used by individuals who can form legally binding contracts under applicable law. Without limiting the foregoing, our services are not available to children (persons under the age of 18) or to temporarily or indefinitely suspended members. If you are under the age of 18, you can use this service only in conjunction with, and under the supervision of your parents or guardians. If you do not qualify, please do not use our service. If you are registering as a business entity, you represent that you have the authority to bind the entity to the TAC. REGISTRATION OBLIGATIONS In consideration of your use of the Service, you agree to: (a) provide true, accurate, current and complete information about yourself as prompted by the Service's registration form (such information being the "Bidder Information") and (b) maintain and promptly update the Registration Data to keep it true, accurate, current and complete. If you provide any information that is untrue, inaccurate, not current or incomplete, or Sebae has reasonable grounds to suspect that such information is untrue, inaccurate, not current or incomplete, Sebae has the right to suspend or terminate your account and refuse any and all current or future use of the Service (or any portion thereof). DESCRIPTIONS OF SERVICE Sebae provides the following services under the Auction Flex & HiBid trademarks: Integrated Web Service (for auctioneers), internet bidding (absentee, online-only, & webcast). You can learn more about these services in the following sections. HIBID INTERNET AUCTION PLATFORM & WEB SERVICE DESCRIPTION Sebae provides the HiBid (formerly Bidopia) Internet Auction Platform & Web Service ("HWS") under the HiBid trademark as a software solution for auctioneers wishing to extend the audience of their live auctions to the internet. The HWS provides various features including internet absentee bidding, internet-only auctions, and webcast auctions. The HWS is able to changes its appearance to coincide with the website that it is powering. Accordingly, the HWS powers the www.hibid.com website as well as numerous Auction Flex customer websites. This ability to change appearance is a feature of the HWS. Much like internet merchant account providers can host a secure web page for a vendor to easily process payments, the HWS hosts certain portions of the auctioneer's website to easily enable advanced features such as internet bidding. INTERNET ABSENTEE BIDDING Internet absentee bidding allows you to place a bid for an item in advance of an auction. This allows you to place bids on lots without actually attending the auction. INTERNET-ONLY AUCTIONS Internet only bidding allows you to place a bid for an item prior to the auction lot closing online. In an internet-only auction there is no live auction. WEBCAST AUCTIONS Webcast auctions allow you to bid in real-time against other bidders or place pre-bids prior to a lot going "live". Lots are sold in accordance with the Auctioneer's terms and conditions which are accessible from each lot's page. It is your responsibility to read and accept the Auctioneer's terms and conditions prior to placing your bid. When you place a bid you are agreeing to be bound by Precision Warehouse & Sebae's terms and conditions. By placing a bid you are entering into a legally binding and enforceable contract. Please keep in mind that you are bidding against other internet bidders as well as floor bidders, phone bidders, and regular absentee bidders (this list does not constitute a complete list of bidder types but does highlight the common bidder channels). Precision Warehouse, at their discretion, can approve or deny bidders. The auctioneer reserves the right to accept or deny bidders for any reason. Prior to approval Precision Warehouse may contact you to determine your credit worthiness. If the auctioneer approves your bid, the auctioneer will then process your bid in accordance with their terms and conditions. Should your bid for a lot prove successful, the auctioneer may contact you to arrange for payment & shipping (if applicable). If the auctioneer required registration via a credit card, the auctioneer reserves the right to process your winning bids to the credit card provided during registration. Sebae, through the Auction Flex & HiBid products & services, facilitates the internet bidding process between the Auctioneer & the bidder. Sebae is in no way a party to the transaction. Because Sebae is not a party to the transaction, you accept that you will have no claim or cause of action against Sebae in respect of the sale (or non-sale) of any Lot. If you have a dispute with an Auctioneer or another user of the Service with regard to the sale (or non-sale) of any Lot you agree that Sebae, its officers, agents, employees will not be liable for losses (including, but not limited to, loss of profits, special loss, indirect loss and consequential los), costs, damages, liabilities, claims, demands and expenses of any kind arising out of or connected with such dispute. You also accept that none of the aforementioned are under any obligation to take any action to resolve any dispute between you and an Auctioneer Precision Warehouse/Sebae is not responsible for any typographical, pictorial or technical errors in information about Lots on the Site as provided by Auctioneers. Sebae does not evaluate Lots and does not act as a specialist or expert on any related subject matter.Precision Warehouse / Sebae makes no warranties or representation of any kind or nature with respect to Lots (including but not limited to representations or warranties as to the accuracy of description, genuineness, quality, authorship, attribution, provenance, period, culture, source, origin or safety). If you have any questions, e-mail the Auctioneer directly. In particular, make sure that you understand Precision Warehouse payment terms and shipping terms. BIDDING The Service requires you to login with your username and password prior to placing a bid on a Lot. Making bids with false information or with stolen credit card information is prohibited and illegal. Your user name and password are required in order to place internet bids. Making bids in a false name or with an invalid or stolen credit card is prohibited. Each bid carries the computer coding of the Internet provider which allows the individual user to be traced and Sebae may at its discretion release this information to enable legal action to be taken. Sebae may, in its entire discretion, refuse or remove bids where it suspects that bids contravene this prohibition. By placing a bid, you are making a binding and irrevocable offer to purchase the Item at any price up to the maximum bid amount you submit. If you win, you must complete the transaction, subject to any contractual right or other right at law to rescind the contract in certain circumstances. Failure to complete transaction without lawful reason is not only a breach of your contract with the Seller but also a breach of this User Agreement. The amount bid can be increased but cannot be decreased. The auctioneer may, at their discretion, allow you to withdraw and resubmit a bid in the case of bids containing an obvious typographical error. You may forward a request to withdraw a bid and resubmit a correct bid by immediately sending an email to the auctioneer, however, there is no guarantee that any bid will be withdrawn. Although Sebae will use best efforts to forward all bids, Sebae does not accept any responsibility for lost bids or problems with the recipient auctioneer's ability to process your bid. Moreover, Sebae cannot guarantee that bids received will be processed by the individual auctioneers. Please note that Precision Warehouse / Sebae's role is limited to the provision of the Site for dissemination and publication of information provided by the Sellers. THE WINNING BID The winning bid in an auction will be the highest bid that exceeds any reserve (if a reserve exists). In the case of equal bids, the earliest bid received will be the winning bid. If a higher bid is subsequently withdrawn or removed then the auctioneer shall have the right to accept the next highest bid. NOTICE OF END OF SALE, PAYMENT & SHIPPING After the sale has ended, the auctioneer will notify the winning bidder via phone, fax or mail that they have won. If you do not receive notice that you have made the winning bid and think that you are the top bidder, you should check with the auctioneer directly. You will make all payment for Items to the auctioneer in accordance with their terms and conditions. BUYER'S PREMIUM, TAXES AND DUTIES If you are a successful bidder, you are responsible for paying any buyer's premium, taxes and duties (including any VAT, sales tax and import duties) that may be imposed on the final price paid for an Item. Accordingly, it is your responsibility to check the applicable taxes and duties that may be imposed on an Item prior to bidding for it. PRIVACY We do not sell or rent your personal information to third parties for their marketing purposes without your explicit consent and we only use your information as described in the Privacy Policy. COPYRIGHT All material and content as provided by the Service is protected by copyright and similar rights. You can not use or make available any of that material for any commercial purpose. SPECIAL ADMONITIONS FOR INTERNATIONAL USE Recognizing the global nature of the Internet, you agree to comply with all local rules regarding online conduct and acceptable content. Specifically, you agree to comply with all applicable laws regarding the transmission of technical data exported from the United States or the country in which you reside. DISCLAIMER OF WARRANTIES You expressly understand and agree that: a. Your use of the service is at your sole risk. The service is provided on an "as is" and "as available" basis. Precision Warehouse / Sebae expressly disclaims all warranties of any kind, whether express or implied, including, but not limited to the implied warranties of merchantability, fitness for a particular purpose and non-infringement. b. Precision Warehouse / Sebae makes no warranty that (i) the service will meet your requirements, (ii) the service will be uninterrupted, timely, secure, or error-free, (iii) the results that may be obtained from the use of the service will be accurate or reliable, (iv) the quality of any products, services, information, or other material purchased or obtained by you through the service will meet your expectations, and (v) any errors in the software will be corrected. c. Any material downloaded or otherwise obtained through the use of the service is done at your own discretion and risk and that you will be solely responsible for any damage to your computer system or loss of data that results from the download of any such material. d. no advice or information, whether oral or written, obtained by you from Sebae or through or from the service shall create any warranty not expressly state in the TAC. LIMITATION OF LIABILITY You expressly understand and agree that Sebae shall not be liable for any direct, indirect, incidental, special, consequential or exemplary damages, including but not limited to, damages for loss of profits, goodwill, use, data or other intangible losses (even if Sebae has been advised of the possibility of such damages), resulting from: (i) the use or the inability to use the service; (ii) the cost of procurement of substitute goods and services resulting from any goods, data, information or services purchased or obtained or messages received or transactions entered into through or from the service; (iii) unauthorized access to or alteration of your transmissions or data; (iv) statements or conduct of any third party on the service; or (v) any other matter relating to the service. EXCLUSIONS AND LIMITATIONS Some jurisdictions do not allow the exclusion of certain warranties or the limitation or exclusion of liability for incidental or consequential damages. Accordingly, some of the above limitations of of the previous two sections titled 'Disclaimer of Warranties' and 'Limitation of Liability' may not apply to you. INDEMNITY You agree to indemnify and hold Sebae harmless from any claim or demand, including reasonable attorneys' fees, made by any third party due to or arising out of your breach of this Agreement or the documents it incorporates by reference, or your violation of any law or the rights of a third party. LEGAL COMPLIANCE You shall comply with all applicable domestic and international laws, statutes, ordinances and regulations regarding your use of our service and your bidding on, listing, purchase, solicitation of offers to purchase, and sale of items. GENERAL INFORMATION The TAC constitute the entire agreement between you and Sebae and govern your use of the Service, superseding any prior agreements between you and Sebae. The TAC and the relationship between you and Sebae shall be governed by the laws of the State of Florida without regard to its conflict of law provisions. You and Sebae agree to submit to the personal and exclusive jurisdiction of the courts located within the county of Marion, Florida. The failure of Sebae to exercise or enforce any right or provision of the TAC shall not constitute a waiver of such right or provision. If any provision of the TAC is found by a court of competent jurisdiction to be invalid, the parties nevertheless agree that the court should endeavor to give effect to the parties' intentions as reflected in the provision, and the other provisions of the TAC remain in full force and effect. You agree that regardless of any statute or law to the contrary, any claim or cause of action arising out of or related to use of the Service or the TAC must be filed within one (1) year after such claim or cause of action arose or be forever barred.
Listing Information
********This Auction will be in West Covina, Ca. 91723******** This a smaller auction with a lot of automotive machinery equipment . Some of the other items you will find are an Auto Lift, Welders, Sunnen Equip, Mill, Lathe, and much more. Good selection of engine blocks, heads, and misc auto parts Auction Preview will be August 22nd, 9am -4pm Auction will close it's first lot right at 7pm August 22nd, 2020 **********This Auction has a 3 days for all items to be picked up*********** ********* We will be open Sunday day after Auction for item pick up.*********** All items must be paid for by Monday, August 24th , 4:00 pm or we will charge your card on file **************All items must be picked up at 667 E. Edna Pl West Covina, within 3 days after auction. Items not picked up by 4pm on August 25th, 2020 will be consider abandoned.( no refunds and reported negative HiBid feedback) We ask everyone to please pick up their items as soon as they can. Forklift will be onsite for all items that need to be loaded. **READ BELOW. Important Auction Information 1.) Register to bid. At the top of your screen you will see a button labeled "Login/New Bidder". You will need to click this and fill out the basic information to create your new account or login to your existing account. If you have bid with us in the past and have forgotten your Username or Password, you can reset them from there. There is no charge to register and bid, you only pay if you win an item. The credit card on file will be validated by our software company. This means they will put a "hold" on your credit card for $1 and then reverse that charge within 24 hours. This ensures the card is valid and that you are bidding against only other valid bidders. 2.) Preview the entire catalog early and often. New items are added to the catalog as they come in to the warehouse and can sometimes fall on different pages depending on where they are placed in the building. It isn't unusual for new items to be added just minutes before the auction begins. 3.) Pick the items you would like to bid on and PRE-BID with realistic numbers. We can not stress this enough. Items can be lost in the final seconds due to last second bids, Internet outages, power or site failures. The computer will bid on your behalf up to your maximum amount if some else places a bid. EXAMPLE A.) You place a bid of $100 for an item. Someone else bids $50 and nobody else bids, you win your item for $55. EXAMPLE B.) You place a bid of $100 for an item. Someone else bids $100 and nobody else bids, you will still win your item at $100 because it is the first bid. EXAMPLE C.) You place a bid of $100 for an item. Someone else bids $110 in the final seconds. Bidding extends 2 minutes and you will only have 2 minutes total to bid again. 4.) PLEASE READ the terms and conditions. All bidders are bound by the same terms and conditions for this auction included payment options, pickup times and other things important to the auction. Most questions will be answered on our website, but if you have one that isn't you can call us @805-835-7085 and we will help you. 5.) Have fun and save money! Precision Warehouse has revolutionized the way auction items are being sold with our Internet Platform. Do not under estimate how much money you can save. We have buyers every month from several hundred miles away who cannot believe the savings! Bidding Notice: Bidding Notice: Bidding open now. We encourage you to leave maximum bids and have the computer bid on your behalf as the live portion of the auction moves very quickly! NOTICE: Please click and read the "Auction Details" section. This will give you information on payment, pickup times, bid increments and the terms and conditions of the auction. All items in this auction are sold AS-IS condition. Please NOTE: Items will be added for bidding daily until the auction time! If you are the winning high bidder you are responsible for paying for that item. Please read out terms and conditions before bidding

1
Blasting Cabinet
ABS Products Serial# 3509104 Model V-200 4828

2
Parts Washer
EMC Model# 80E VAC 220 Hz60 Ph3 FLA 40

3
Lathe
LeBlond Regal Line Volts 220/440 Cycles 50/60 Phase 1 F. L. Amps .2

4
DoAll Bandsaw
DoAll Metal Master

5
Brideport Mill
Trak Digital Positioning Readout System

5
Snap-On Rolling Tool Box w/Cabinet Attachment
31" (46" with attachement) x 21 x 38"

6
Sunnen CK-10 Powerhone
Automatic cylinder resizing machine Misc accesories included


8
P&H AC/DC Arc Welder
Model# DAR-300HFGW Misc rods and bottle of argon included 208-230-460v SIngle Phase AC/DC Welder

8
Yale Propane Forklift
Runs New forks Needs seat and new tires Side shift hose leaks

9
Fly Wheel Surface Grinder
5Hp motor 230-460v 3 Phase


11
Millermatic 251 Wire Welder
Mig welder w/ bottle of compressed gas

11
Acetylene Cutting Torch Set
No oxygen bottle included Regulators, hose, cutting torch and one bottle.




15
Turntable for Mill
For Precision Machining




19
Pallet of 2 Shelves, 1 Cabinet w/ Doors
48x12x72" Cabinet is 48x18x72"




22
Cabinet w/ Various Machinery Parts
Wheel turning devices Cam shaft Rod Misc collets Vise jaws & More

23
Vibra-Motive Surface Grinder
by Peterson Welding Lab



25
Gobby Tricycle
Model 7112

26
Battery Charger
Marquette 39-100 Battery Charger





30
Sunnen Heavy Duty Cap & Rod Grinder
Model CRG-750K 155v 8.6amp 60hz ph 1

31
Sunnen Heavy Duty Precision Honing Machine
Includes precision gauge for pin fitting and rod reconditioning Model LBB-1499

32
Rod Tumbler
Steelabrator from Abrasive Equipement Supply Co 230v Single phase

33
Hydraulic Press
F.A. Nugier Co Model H40 40 ton capacity

34
Ingersoll-Rand Industrial Air Compressor
w/ Air cooler, 2 Cylinder, Single phase Model 1545

35
Winona Van Norman Seat Cutter & Table
Tools included Typre RV12 NR 8909


37
Pneumatic Valve Master Hydraulic Valve Spring Comp
Vinkler valve master hydrualic valve spring compressor



40
Sunen BP-10K Press
Capacity 10 tons 115v 8.6amp 60hz 1 ph

41
Kwik-Way Valve Grinder
Model 012 115v 60 cycles 11amps ph 1


43
Lathe 12x66
Variable speed


45
Pro-Lift 2 Post Lift
208-230v Single phase 2hp motor Unknown condition Approx 9,000lbs


47
Valve Seat Grinding Bench
Misc tools included

48
Floor Mount Jib Crane
Vertical 10' Horizontal 11'

49

50
Table w/ Vise
51x34.5x59" Columbian Vise, 4" jaw

51
Metal Shop Table Heads Not Included
79" x 32" x 34" Metal table only in this lot


53
3 Boxes of MIsc Helicoil Coils
Installation tools included

54
Sunnen AG-300 Precision Gauge
for pin fitting and rod reconditioning




58
8 Hubcaps
4 Lincoln Continental 2 Lincoln, 1 Ford, 1 Chevy Great for wall art







65
Misc Lot
2 Slide hammers 2 Oil Cans Quadrajet carburetor






70
Toyota Land Cuiser 1F Motor
Long block Had new valves, been sitting Block needs light honing Will include misc parts of engine

71
5 Misc Blocks
No main caps

72
6 Blocks
Some w/ main caps, some without

73
4 Misc Blocks w/ Main Caps
2 Fords Small Block Chevy 4 bold main

74
Lot of 4 Long Blocks
3 Chevy 1 Pontiac need rebuilt



77
Box of Misc Bearings
Multiple brands, cars

78
Lot of Misc Piston Rings
Various brands and sizes




82
3 Sets of Pistons
Big Block Chevy Ford 408 cubic inch Piston for 6 cylinder

83
Misc Automotive Parts
Timing belt Lifters Oil filter


85
Rolling Steel Shop Cart w/ Steel Wheels
42" x 25" x 31" Dual rear wheels


87
Metal Cabinet of Misc Intake and Exhaust Valves
Valves new in box Cabinet: 31x12x36"

88
Metal Cabinet of Misc Intake & Exhause Valves
Valves new in box Cabinet: 31x12x36




91
5.0L Fox Body Mustang Motor
Late 80's w/ accesories unknown history

92
Craftsman Grinder
1/3 hp grinder Ball bearing Split Phase Motor 3450 RPM Model 39719580

93
Kurt 6" Mill Vise
Kurt Mfg Co Precision Machine Vise




97
Valve Covers & Timing Chain
3 Corvette Valve Covers Small block Chevy timing chain




101
Melling Oil Pump
Ford New Made in USA


103
Big Block Chevy Heads
Par# GM6272292

104
Big Block Chevy 454
New pistons, 7 in, 1 out Has harmonic balancer

105



108
Ford Heads
71-74 Cleveland V8 Cores




















128
Chevy Small Block 383 Crankshaft
3800 Stroke Mains are standard 350 Cubic in sice '86 & newer


130
Lot of 8 Cylinder Crankshafts
6 cylinder x 2 4 cylinder x 6







136






142





147
Misc Hand Tools
With tool bag




151
Pullers & Clamp
3 Pullers 1 Clamp





156
Bearing Puller & Separator Set
With case Pittsburg Model 93980


158
MicroMeters Set Of 5
Brown & Sharpe 3" -4" Model 203 3" 2"

159
Large Calipers
Set of 2 1 wood case

160
Calipers Mitutoyo
Lot of 2 One is a Mitutoyo



163



166
Small Tap & Die Set w/Wooden Case
With Universal Bolt & Groove Gauge

167
2 Micrometer 50-75mm, 25mm-0.01mm
Made by Mitntoyo With Sharpening Stone Bonus


169
7 Misc Micrometers
Various sizes between 1" and 7"





174
Helicoil Sets
Various Sizes










184



187
Blue Point & Kobalt Impact Guns
Blue Point 3/8 Drive Kobalt 1/2 Drive




191
Misc Shelf Lot
Piston Rings & Crankshaft Bearings

192
Misc Shelf Lot
Misc Auto Parts, Valves,Springs, Crank Rods, Water Pump

193
Misc Shelf Lot
Crank shaft weights, Rocker Arms, Pistons

194
Misc Shelf Lot
Misc Auto Parts Head Studs, Ford Valve Springs, Crank Bearings

195
Misc Shelf Lot
Top End Gasket Set

196
Misc Hand Tools
Taps & Dies Clamps Misc Tools

197
Misc Hand Tools
Large Sockets Craftsman Tools

198
Misc Valves
Various Sizes

199
Mill Chucks
Lot of 5 Some are Jacobs Chucks

200
Taps & Dies
Various Sizes






206
Misc Crank Shafts
Lot of 20 Shafts

207

208
6 Cylinder Core Heads
Sold as a pair


210
GM Core Heads
Sold as a pair







217
4 Misc Heads
Chevy & Ford


219
Aluminum Valve Covers/GM Alternator
Mickey Thompson/Offen Hauser


221
Enco 6" Carbide Grinder
Model TG302 115v 3450rpm




225


227
Pallet Jack
Working condition

228
Metal Organizer Metal Bins
Each bin is 6x9x8" Lot of 2

229
24 Drawer Bin Cabinet
Misc nut & bolts as contents Steel cabinet

230
6" Right Angle Plates/Flywheel Grinding Stone
Goodson Flywheel grinding stone

231
Scale Weights
Lot of 9 weights

232
Misc Lathe Tooling
Various items

233
Misc Lathe Tooling
Various items

234
Misc Lathe Tooling
Various items

235
Misc Lathe Tooling
Various items


237
Metal Storage Cabinet w/ Some Contents
Comes with all contents on the left side 56x20x40"

238
Rolling Metal Cart
24x27x40" Contents NOT Included 5 shelves

239
Drill Bits
Misc sizes

240
Drill Bits
Misc Sizes

241
Drill Bits
Misc Sizes

242
Drill Bits
Misc Sizes

243
Drill Bits
Misc Sizes

244
Drill Bits
Misc sizes

245
Reamer Bits
Various Sizes


247
Drill Bits
Misc Sizes















262
Wrenches
Various sizes and brands

263
Misc Tools
Saw Channel locks Goggles and More

264
Misc Tools
T-Handle Allen Keys Mallet Saw Handle and More


266
Misc Tools
Wrenches Stapler Saw and More






272
Misc Lot
Nut Driver Set Gauge

273
Name Brand Sockets
1/2 & 3/8" Craftsman deep socket set 1/2" Craftsman short sockets 1/4" Craftsman deep socket Misc deep sockets, SU brand and others






279
Misc Sockets
Various sizes Stud extractor & spark plug


281
Misc Ratchets & Sockets
Ratchets:1/4, 3/8, 1/2" Extensions: 3/4, 1/2, 3/8"



284
Misc Lot
Various pullers Clutch allignment tool

285
Misc Bin
Blue-Point stone honing set Tap & die handles Block tester w/dye Engine Block dye Nut extractors

287
Gobby Tricycle
Model 7112


Photo Gallery

Save Listing As Favorite

Print Listing information

Share This Listing

  • Facebook
  • Email this Listing to a Friend







Sponsored Links

Covina Automotive Auction

Precision Warehouse

Precision Warehouse


Contact:
Phone: 805-835-7085
Sale Location
667 East Edna Place
West Covina, CA 91723
Sale Dates and Times
Sale Terms and Conditions
All Lots – AS IS WHERE IS. All lots are available for inspection prior to bidding on preview days stated No guarantees or warranties of any kind. Removal Assistance: Winning bidders are solely responsible for the removal of purchased items and must bring their own help and tools for item removal. ITEM REPRESENTATION– Descriptions, photos and any other information given by Precision Warehouse or one of its agents, is solely for informational purposes. Precision Warehouse is not responsible for inaccurate photos, descriptions or information, verbal or implied. Bidders are encouraged to view items in person and to do their own research prior to bidding. All items in the Auction are sold "As Is", "Where Is" with no warranty expressed or implied, unless otherwise notated. By placing a bid, you agree to hold Precision Warehouse and its agents harmless of any wrong doing. LIABILITY–View and bid at your own risk. Precision Warehouse is not responsible for injury or damage of any kind, to anything or anyone, while previewing, bidding, loading out, or conducting business. Additionally Precision Warehouse is not responsible for injury or damage of any kind to anyone or anything relating to items obtained from Precision Warehouse By placing a bid, you agree to hold Precision Warehouse and its agents harmless regardless of opinion. During preview and loadout bidders are responsible for any damage to the premises of any kind for any reason. NOTICE OF RESERVE- Pursuant to UCC§ 2-328 and individual state law, notice is hereby given that in the event of a reserve, Precision Warehouse or its affiliates may implement such reserve by bidding on behalf of the seller, whether by opening bidding or continuing bidding in response to other bidders until reaching the reserve. If we have an interest in an offered lot and the proceeds there from other than our commissions, we may bid in the same manner therefore to protect such interest. Internet Premium: 15% Sales Tax : 7.75% - Sales tax applied to Hammer Price. Participation Requirements: Valid Credit Card required for bidding approval Payment Options: Visa, MasterCard, Discover, American Express, and Pay Pal Visa MasterCard Discover American Express Payment Instructions: Your Credit Card On Fie Will Be Charge May 19th @ 2:pm, If You Wish To Use Another Method Of Payment Please Contact Precision Warehouse (805-835-7085). Bidder is responsible for shipping. Currency Type: USD Shipping Instructions: Please contact Precision Warehouse for general shipping and handling information. Precision Warehouse SERVICE TERMS AND CONDITIONS ACCEPTANCE OF TERMS Precision Warehouse/Sebae Data Solutions, (the makers of Auction Flex & HiBid (formerly Bidopia) hereafter referred to as "Sebae"), provides its service to you, subject to the following Terms & Conditions ("TAC"), which we may update from time to time without notice to you. The most current version of the TAC can be found found at any time by visiting the link: http://www.auctionflex.com/showtandc.ap USE AND REGISTRATION Our services are available only to, and may only be used by individuals who can form legally binding contracts under applicable law. Without limiting the foregoing, our services are not available to children (persons under the age of 18) or to temporarily or indefinitely suspended members. If you are under the age of 18, you can use this service only in conjunction with, and under the supervision of your parents or guardians. If you do not qualify, please do not use our service. If you are registering as a business entity, you represent that you have the authority to bind the entity to the TAC. REGISTRATION OBLIGATIONS In consideration of your use of the Service, you agree to: (a) provide true, accurate, current and complete information about yourself as prompted by the Service's registration form (such information being the "Bidder Information") and (b) maintain and promptly update the Registration Data to keep it true, accurate, current and complete. If you provide any information that is untrue, inaccurate, not current or incomplete, or Sebae has reasonable grounds to suspect that such information is untrue, inaccurate, not current or incomplete, Sebae has the right to suspend or terminate your account and refuse any and all current or future use of the Service (or any portion thereof). DESCRIPTIONS OF SERVICE Sebae provides the following services under the Auction Flex & HiBid trademarks: Integrated Web Service (for auctioneers), internet bidding (absentee, online-only, & webcast). You can learn more about these services in the following sections. HIBID INTERNET AUCTION PLATFORM & WEB SERVICE DESCRIPTION Sebae provides the HiBid (formerly Bidopia) Internet Auction Platform & Web Service ("HWS") under the HiBid trademark as a software solution for auctioneers wishing to extend the audience of their live auctions to the internet. The HWS provides various features including internet absentee bidding, internet-only auctions, and webcast auctions. The HWS is able to changes its appearance to coincide with the website that it is powering. Accordingly, the HWS powers the www.hibid.com website as well as numerous Auction Flex customer websites. This ability to change appearance is a feature of the HWS. Much like internet merchant account providers can host a secure web page for a vendor to easily process payments, the HWS hosts certain portions of the auctioneer's website to easily enable advanced features such as internet bidding. INTERNET ABSENTEE BIDDING Internet absentee bidding allows you to place a bid for an item in advance of an auction. This allows you to place bids on lots without actually attending the auction. INTERNET-ONLY AUCTIONS Internet only bidding allows you to place a bid for an item prior to the auction lot closing online. In an internet-only auction there is no live auction. WEBCAST AUCTIONS Webcast auctions allow you to bid in real-time against other bidders or place pre-bids prior to a lot going "live". Lots are sold in accordance with the Auctioneer's terms and conditions which are accessible from each lot's page. It is your responsibility to read and accept the Auctioneer's terms and conditions prior to placing your bid. When you place a bid you are agreeing to be bound by Precision Warehouse & Sebae's terms and conditions. By placing a bid you are entering into a legally binding and enforceable contract. Please keep in mind that you are bidding against other internet bidders as well as floor bidders, phone bidders, and regular absentee bidders (this list does not constitute a complete list of bidder types but does highlight the common bidder channels). Precision Warehouse, at their discretion, can approve or deny bidders. The auctioneer reserves the right to accept or deny bidders for any reason. Prior to approval Precision Warehouse may contact you to determine your credit worthiness. If the auctioneer approves your bid, the auctioneer will then process your bid in accordance with their terms and conditions. Should your bid for a lot prove successful, the auctioneer may contact you to arrange for payment & shipping (if applicable). If the auctioneer required registration via a credit card, the auctioneer reserves the right to process your winning bids to the credit card provided during registration. Sebae, through the Auction Flex & HiBid products & services, facilitates the internet bidding process between the Auctioneer & the bidder. Sebae is in no way a party to the transaction. Because Sebae is not a party to the transaction, you accept that you will have no claim or cause of action against Sebae in respect of the sale (or non-sale) of any Lot. If you have a dispute with an Auctioneer or another user of the Service with regard to the sale (or non-sale) of any Lot you agree that Sebae, its officers, agents, employees will not be liable for losses (including, but not limited to, loss of profits, special loss, indirect loss and consequential los), costs, damages, liabilities, claims, demands and expenses of any kind arising out of or connected with such dispute. You also accept that none of the aforementioned are under any obligation to take any action to resolve any dispute between you and an Auctioneer Precision Warehouse/Sebae is not responsible for any typographical, pictorial or technical errors in information about Lots on the Site as provided by Auctioneers. Sebae does not evaluate Lots and does not act as a specialist or expert on any related subject matter.Precision Warehouse / Sebae makes no warranties or representation of any kind or nature with respect to Lots (including but not limited to representations or warranties as to the accuracy of description, genuineness, quality, authorship, attribution, provenance, period, culture, source, origin or safety). If you have any questions, e-mail the Auctioneer directly. In particular, make sure that you understand Precision Warehouse payment terms and shipping terms. BIDDING The Service requires you to login with your username and password prior to placing a bid on a Lot. Making bids with false information or with stolen credit card information is prohibited and illegal. Your user name and password are required in order to place internet bids. Making bids in a false name or with an invalid or stolen credit card is prohibited. Each bid carries the computer coding of the Internet provider which allows the individual user to be traced and Sebae may at its discretion release this information to enable legal action to be taken. Sebae may, in its entire discretion, refuse or remove bids where it suspects that bids contravene this prohibition. By placing a bid, you are making a binding and irrevocable offer to purchase the Item at any price up to the maximum bid amount you submit. If you win, you must complete the transaction, subject to any contractual right or other right at law to rescind the contract in certain circumstances. Failure to complete transaction without lawful reason is not only a breach of your contract with the Seller but also a breach of this User Agreement. The amount bid can be increased but cannot be decreased. The auctioneer may, at their discretion, allow you to withdraw and resubmit a bid in the case of bids containing an obvious typographical error. You may forward a request to withdraw a bid and resubmit a correct bid by immediately sending an email to the auctioneer, however, there is no guarantee that any bid will be withdrawn. Although Sebae will use best efforts to forward all bids, Sebae does not accept any responsibility for lost bids or problems with the recipient auctioneer's ability to process your bid. Moreover, Sebae cannot guarantee that bids received will be processed by the individual auctioneers. Please note that Precision Warehouse / Sebae's role is limited to the provision of the Site for dissemination and publication of information provided by the Sellers. THE WINNING BID The winning bid in an auction will be the highest bid that exceeds any reserve (if a reserve exists). In the case of equal bids, the earliest bid received will be the winning bid. If a higher bid is subsequently withdrawn or removed then the auctioneer shall have the right to accept the next highest bid. NOTICE OF END OF SALE, PAYMENT & SHIPPING After the sale has ended, the auctioneer will notify the winning bidder via phone, fax or mail that they have won. If you do not receive notice that you have made the winning bid and think that you are the top bidder, you should check with the auctioneer directly. You will make all payment for Items to the auctioneer in accordance with their terms and conditions. BUYER'S PREMIUM, TAXES AND DUTIES If you are a successful bidder, you are responsible for paying any buyer's premium, taxes and duties (including any VAT, sales tax and import duties) that may be imposed on the final price paid for an Item. Accordingly, it is your responsibility to check the applicable taxes and duties that may be imposed on an Item prior to bidding for it. PRIVACY We do not sell or rent your personal information to third parties for their marketing purposes without your explicit consent and we only use your information as described in the Privacy Policy. COPYRIGHT All material and content as provided by the Service is protected by copyright and similar rights. You can not use or make available any of that material for any commercial purpose. SPECIAL ADMONITIONS FOR INTERNATIONAL USE Recognizing the global nature of the Internet, you agree to comply with all local rules regarding online conduct and acceptable content. Specifically, you agree to comply with all applicable laws regarding the transmission of technical data exported from the United States or the country in which you reside. DISCLAIMER OF WARRANTIES You expressly understand and agree that: a. Your use of the service is at your sole risk. The service is provided on an "as is" and "as available" basis. Precision Warehouse / Sebae expressly disclaims all warranties of any kind, whether express or implied, including, but not limited to the implied warranties of merchantability, fitness for a particular purpose and non-infringement. b. Precision Warehouse / Sebae makes no warranty that (i) the service will meet your requirements, (ii) the service will be uninterrupted, timely, secure, or error-free, (iii) the results that may be obtained from the use of the service will be accurate or reliable, (iv) the quality of any products, services, information, or other material purchased or obtained by you through the service will meet your expectations, and (v) any errors in the software will be corrected. c. Any material downloaded or otherwise obtained through the use of the service is done at your own discretion and risk and that you will be solely responsible for any damage to your computer system or loss of data that results from the download of any such material. d. no advice or information, whether oral or written, obtained by you from Sebae or through or from the service shall create any warranty not expressly state in the TAC. LIMITATION OF LIABILITY You expressly understand and agree that Sebae shall not be liable for any direct, indirect, incidental, special, consequential or exemplary damages, including but not limited to, damages for loss of profits, goodwill, use, data or other intangible losses (even if Sebae has been advised of the possibility of such damages), resulting from: (i) the use or the inability to use the service; (ii) the cost of procurement of substitute goods and services resulting from any goods, data, information or services purchased or obtained or messages received or transactions entered into through or from the service; (iii) unauthorized access to or alteration of your transmissions or data; (iv) statements or conduct of any third party on the service; or (v) any other matter relating to the service. EXCLUSIONS AND LIMITATIONS Some jurisdictions do not allow the exclusion of certain warranties or the limitation or exclusion of liability for incidental or consequential damages. Accordingly, some of the above limitations of of the previous two sections titled 'Disclaimer of Warranties' and 'Limitation of Liability' may not apply to you. INDEMNITY You agree to indemnify and hold Sebae harmless from any claim or demand, including reasonable attorneys' fees, made by any third party due to or arising out of your breach of this Agreement or the documents it incorporates by reference, or your violation of any law or the rights of a third party. LEGAL COMPLIANCE You shall comply with all applicable domestic and international laws, statutes, ordinances and regulations regarding your use of our service and your bidding on, listing, purchase, solicitation of offers to purchase, and sale of items. GENERAL INFORMATION The TAC constitute the entire agreement between you and Sebae and govern your use of the Service, superseding any prior agreements between you and Sebae. The TAC and the relationship between you and Sebae shall be governed by the laws of the State of Florida without regard to its conflict of law provisions. You and Sebae agree to submit to the personal and exclusive jurisdiction of the courts located within the county of Marion, Florida. The failure of Sebae to exercise or enforce any right or provision of the TAC shall not constitute a waiver of such right or provision. If any provision of the TAC is found by a court of competent jurisdiction to be invalid, the parties nevertheless agree that the court should endeavor to give effect to the parties' intentions as reflected in the provision, and the other provisions of the TAC remain in full force and effect. You agree that regardless of any statute or law to the contrary, any claim or cause of action arising out of or related to use of the Service or the TAC must be filed within one (1) year after such claim or cause of action arose or be forever barred.
Listing Details
********This Auction will be in West Covina, Ca. 91723******** This a smaller auction with a lot of automotive machinery equipment . Some of the other items you will find are an Auto Lift, Welders, Sunnen Equip, Mill, Lathe, and much more. Good selection of engine blocks, heads, and misc auto parts Auction Preview will be August 22nd, 9am -4pm Auction will close it's first lot right at 7pm August 22nd, 2020 **********This Auction has a 3 days for all items to be picked up*********** ********* We will be open Sunday day after Auction for item pick up.*********** All items must be paid for by Monday, August 24th , 4:00 pm or we will charge your card on file **************All items must be picked up at 667 E. Edna Pl West Covina, within 3 days after auction. Items not picked up by 4pm on August 25th, 2020 will be consider abandoned.( no refunds and reported negative HiBid feedback) We ask everyone to please pick up their items as soon as they can. Forklift will be onsite for all items that need to be loaded. **READ BELOW. Important Auction Information 1.) Register to bid. At the top of your screen you will see a button labeled "Login/New Bidder". You will need to click this and fill out the basic information to create your new account or login to your existing account. If you have bid with us in the past and have forgotten your Username or Password, you can reset them from there. There is no charge to register and bid, you only pay if you win an item. The credit card on file will be validated by our software company. This means they will put a "hold" on your credit card for $1 and then reverse that charge within 24 hours. This ensures the card is valid and that you are bidding against only other valid bidders. 2.) Preview the entire catalog early and often. New items are added to the catalog as they come in to the warehouse and can sometimes fall on different pages depending on where they are placed in the building. It isn't unusual for new items to be added just minutes before the auction begins. 3.) Pick the items you would like to bid on and PRE-BID with realistic numbers. We can not stress this enough. Items can be lost in the final seconds due to last second bids, Internet outages, power or site failures. The computer will bid on your behalf up to your maximum amount if some else places a bid. EXAMPLE A.) You place a bid of $100 for an item. Someone else bids $50 and nobody else bids, you win your item for $55. EXAMPLE B.) You place a bid of $100 for an item. Someone else bids $100 and nobody else bids, you will still win your item at $100 because it is the first bid. EXAMPLE C.) You place a bid of $100 for an item. Someone else bids $110 in the final seconds. Bidding extends 2 minutes and you will only have 2 minutes total to bid again. 4.) PLEASE READ the terms and conditions. All bidders are bound by the same terms and conditions for this auction included payment options, pickup times and other things important to the auction. Most questions will be answered on our website, but if you have one that isn't you can call us @805-835-7085 and we will help you. 5.) Have fun and save money! Precision Warehouse has revolutionized the way auction items are being sold with our Internet Platform. Do not under estimate how much money you can save. We have buyers every month from several hundred miles away who cannot believe the savings! Bidding Notice: Bidding Notice: Bidding open now. We encourage you to leave maximum bids and have the computer bid on your behalf as the live portion of the auction moves very quickly! NOTICE: Please click and read the "Auction Details" section. This will give you information on payment, pickup times, bid increments and the terms and conditions of the auction. All items in this auction are sold AS-IS condition. Please NOTE: Items will be added for bidding daily until the auction time! If you are the winning high bidder you are responsible for paying for that item. Please read out terms and conditions before bidding

1
Blasting Cabinet
ABS Products Serial# 3509104 Model V-200 4828

2
Parts Washer
EMC Model# 80E VAC 220 Hz60 Ph3 FLA 40

3
Lathe
LeBlond Regal Line Volts 220/440 Cycles 50/60 Phase 1 F. L. Amps .2

4
DoAll Bandsaw
DoAll Metal Master

5
Brideport Mill
Trak Digital Positioning Readout System

5
Snap-On Rolling Tool Box w/Cabinet Attachment
31" (46" with attachement) x 21 x 38"

6
Sunnen CK-10 Powerhone
Automatic cylinder resizing machine Misc accesories included


8
P&H AC/DC Arc Welder
Model# DAR-300HFGW Misc rods and bottle of argon included 208-230-460v SIngle Phase AC/DC Welder

8
Yale Propane Forklift
Runs New forks Needs seat and new tires Side shift hose leaks

9
Fly Wheel Surface Grinder
5Hp motor 230-460v 3 Phase


11
Millermatic 251 Wire Welder
Mig welder w/ bottle of compressed gas

11
Acetylene Cutting Torch Set
No oxygen bottle included Regulators, hose, cutting torch and one bottle.




15
Turntable for Mill
For Precision Machining




19
Pallet of 2 Shelves, 1 Cabinet w/ Doors
48x12x72" Cabinet is 48x18x72"




22
Cabinet w/ Various Machinery Parts
Wheel turning devices Cam shaft Rod Misc collets Vise jaws & More

23
Vibra-Motive Surface Grinder
by Peterson Welding Lab



25
Gobby Tricycle
Model 7112

26
Battery Charger
Marquette 39-100 Battery Charger





30
Sunnen Heavy Duty Cap & Rod Grinder
Model CRG-750K 155v 8.6amp 60hz ph 1

31
Sunnen Heavy Duty Precision Honing Machine
Includes precision gauge for pin fitting and rod reconditioning Model LBB-1499

32
Rod Tumbler
Steelabrator from Abrasive Equipement Supply Co 230v Single phase

33
Hydraulic Press
F.A. Nugier Co Model H40 40 ton capacity

34
Ingersoll-Rand Industrial Air Compressor
w/ Air cooler, 2 Cylinder, Single phase Model 1545

35
Winona Van Norman Seat Cutter & Table
Tools included Typre RV12 NR 8909


37
Pneumatic Valve Master Hydraulic Valve Spring Comp
Vinkler valve master hydrualic valve spring compressor



40
Sunen BP-10K Press
Capacity 10 tons 115v 8.6amp 60hz 1 ph

41
Kwik-Way Valve Grinder
Model 012 115v 60 cycles 11amps ph 1


43
Lathe 12x66
Variable speed


45
Pro-Lift 2 Post Lift
208-230v Single phase 2hp motor Unknown condition Approx 9,000lbs


47
Valve Seat Grinding Bench
Misc tools included

48
Floor Mount Jib Crane
Vertical 10' Horizontal 11'

49

50
Table w/ Vise
51x34.5x59" Columbian Vise, 4" jaw

51
Metal Shop Table Heads Not Included
79" x 32" x 34" Metal table only in this lot


53
3 Boxes of MIsc Helicoil Coils
Installation tools included

54
Sunnen AG-300 Precision Gauge
for pin fitting and rod reconditioning




58
8 Hubcaps
4 Lincoln Continental 2 Lincoln, 1 Ford, 1 Chevy Great for wall art







65
Misc Lot
2 Slide hammers 2 Oil Cans Quadrajet carburetor






70
Toyota Land Cuiser 1F Motor
Long block Had new valves, been sitting Block needs light honing Will include misc parts of engine

71
5 Misc Blocks
No main caps

72
6 Blocks
Some w/ main caps, some without

73
4 Misc Blocks w/ Main Caps
2 Fords Small Block Chevy 4 bold main

74
Lot of 4 Long Blocks
3 Chevy 1 Pontiac need rebuilt



77
Box of Misc Bearings
Multiple brands, cars

78
Lot of Misc Piston Rings
Various brands and sizes




82
3 Sets of Pistons
Big Block Chevy Ford 408 cubic inch Piston for 6 cylinder

83
Misc Automotive Parts
Timing belt Lifters Oil filter


85
Rolling Steel Shop Cart w/ Steel Wheels
42" x 25" x 31" Dual rear wheels


87
Metal Cabinet of Misc Intake and Exhaust Valves
Valves new in box Cabinet: 31x12x36"

88
Metal Cabinet of Misc Intake & Exhause Valves
Valves new in box Cabinet: 31x12x36




91
5.0L Fox Body Mustang Motor
Late 80's w/ accesories unknown history

92
Craftsman Grinder
1/3 hp grinder Ball bearing Split Phase Motor 3450 RPM Model 39719580

93
Kurt 6" Mill Vise
Kurt Mfg Co Precision Machine Vise




97
Valve Covers & Timing Chain
3 Corvette Valve Covers Small block Chevy timing chain




101
Melling Oil Pump
Ford New Made in USA


103
Big Block Chevy Heads
Par# GM6272292

104
Big Block Chevy 454
New pistons, 7 in, 1 out Has harmonic balancer

105



108
Ford Heads
71-74 Cleveland V8 Cores




















128
Chevy Small Block 383 Crankshaft
3800 Stroke Mains are standard 350 Cubic in sice '86 & newer


130
Lot of 8 Cylinder Crankshafts
6 cylinder x 2 4 cylinder x 6







136






142





147
Misc Hand Tools
With tool bag




151
Pullers & Clamp
3 Pullers 1 Clamp





156
Bearing Puller & Separator Set
With case Pittsburg Model 93980


158
MicroMeters Set Of 5
Brown & Sharpe 3" -4" Model 203 3" 2"

159
Large Calipers
Set of 2 1 wood case

160
Calipers Mitutoyo
Lot of 2 One is a Mitutoyo



163



166
Small Tap & Die Set w/Wooden Case
With Universal Bolt & Groove Gauge

167
2 Micrometer 50-75mm, 25mm-0.01mm
Made by Mitntoyo With Sharpening Stone Bonus


169
7 Misc Micrometers
Various sizes between 1" and 7"





174
Helicoil Sets
Various Sizes










184



187
Blue Point & Kobalt Impact Guns
Blue Point 3/8 Drive Kobalt 1/2 Drive




191
Misc Shelf Lot
Piston Rings & Crankshaft Bearings

192
Misc Shelf Lot
Misc Auto Parts, Valves,Springs, Crank Rods, Water Pump

193
Misc Shelf Lot
Crank shaft weights, Rocker Arms, Pistons

194
Misc Shelf Lot
Misc Auto Parts Head Studs, Ford Valve Springs, Crank Bearings

195
Misc Shelf Lot
Top End Gasket Set

196
Misc Hand Tools
Taps & Dies Clamps Misc Tools

197
Misc Hand Tools
Large Sockets Craftsman Tools

198
Misc Valves
Various Sizes

199
Mill Chucks
Lot of 5 Some are Jacobs Chucks

200
Taps & Dies
Various Sizes






206
Misc Crank Shafts
Lot of 20 Shafts

207

208
6 Cylinder Core Heads
Sold as a pair


210
GM Core Heads
Sold as a pair







217
4 Misc Heads
Chevy & Ford


219
Aluminum Valve Covers/GM Alternator
Mickey Thompson/Offen Hauser


221
Enco 6" Carbide Grinder
Model TG302 115v 3450rpm




225


227
Pallet Jack
Working condition

228
Metal Organizer Metal Bins
Each bin is 6x9x8" Lot of 2

229
24 Drawer Bin Cabinet
Misc nut & bolts as contents Steel cabinet

230
6" Right Angle Plates/Flywheel Grinding Stone
Goodson Flywheel grinding stone

231
Scale Weights
Lot of 9 weights

232
Misc Lathe Tooling
Various items

233
Misc Lathe Tooling
Various items

234
Misc Lathe Tooling
Various items

235
Misc Lathe Tooling
Various items


237
Metal Storage Cabinet w/ Some Contents
Comes with all contents on the left side 56x20x40"

238
Rolling Metal Cart
24x27x40" Contents NOT Included 5 shelves

239
Drill Bits
Misc sizes

240
Drill Bits
Misc Sizes

241
Drill Bits
Misc Sizes

242
Drill Bits
Misc Sizes

243
Drill Bits
Misc Sizes

244
Drill Bits
Misc sizes

245
Reamer Bits
Various Sizes


247
Drill Bits
Misc Sizes















262
Wrenches
Various sizes and brands

263
Misc Tools
Saw Channel locks Goggles and More

264
Misc Tools
T-Handle Allen Keys Mallet Saw Handle and More


266
Misc Tools
Wrenches Stapler Saw and More






272
Misc Lot
Nut Driver Set Gauge

273
Name Brand Sockets
1/2 & 3/8" Craftsman deep socket set 1/2" Craftsman short sockets 1/4" Craftsman deep socket Misc deep sockets, SU brand and others






279
Misc Sockets
Various sizes Stud extractor & spark plug


281
Misc Ratchets & Sockets
Ratchets:1/4, 3/8, 1/2" Extensions: 3/4, 1/2, 3/8"



284
Misc Lot
Various pullers Clutch allignment tool

285
Misc Bin
Blue-Point stone honing set Tap & die handles Block tester w/dye Engine Block dye Nut extractors

287
Gobby Tricycle
Model 7112


Gallery Images Loading, Please Wait...
  • Home
  • Hire an Auction Company
  • Add Your Auction Company
  • Member Login
  • Contact Us
  • Desktop Site
Return
Covina Automotive Auction
 Online Only Auction
Auction Date(s)
Bidding Starts: Tuesday Jul 28
Bidding Ends: Saturday Aug 22
Auction Location

West Covina, CA 91723
Listing Terms and Conditions
All Lots – AS IS WHERE IS. All lots are available for inspection prior to bidding on preview days stated No guarantees or warranties of any kind. Removal Assistance: Winning bidders are solely responsible for the removal of purchased items and must bring their own help and tools for item removal. ITEM REPRESENTATION– Descriptions, photos and any other information given by Precision Warehouse or one of its agents, is solely for informational purposes. Precision Warehouse is not responsible for inaccurate photos, descriptions or information, verbal or implied. Bidders are encouraged to view items in person and to do their own research prior to bidding. All items in the Auction are sold "As Is", "Where Is" with no warranty expressed or implied, unless otherwise notated. By placing a bid, you agree to hold Precision Warehouse and its agents harmless of any wrong doing. LIABILITY–View and bid at your own risk. Precision Warehouse is not responsible for injury or damage of any kind, to anything or anyone, while previewing, bidding, loading out, or conducting business. Additionally Precision Warehouse is not responsible for injury or damage of any kind to anyone or anything relating to items obtained from Precision Warehouse By placing a bid, you agree to hold Precision Warehouse and its agents harmless regardless of opinion. During preview and loadout bidders are responsible for any damage to the premises of any kind for any reason. NOTICE OF RESERVE- Pursuant to UCC§ 2-328 and individual state law, notice is hereby given that in the event of a reserve, Precision Warehouse or its affiliates may implement such reserve by bidding on behalf of the seller, whether by opening bidding or continuing bidding in response to other bidders until reaching the reserve. If we have an interest in an offered lot and the proceeds there from other than our commissions, we may bid in the same manner therefore to protect such interest. Internet Premium: 15% Sales Tax : 7.75% - Sales tax applied to Hammer Price. Participation Requirements: Valid Credit Card required for bidding approval Payment Options: Visa, MasterCard, Discover, American Express, and Pay Pal Visa MasterCard Discover American Express Payment Instructions: Your Credit Card On Fie Will Be Charge May 19th @ 2:pm, If You Wish To Use Another Method Of Payment Please Contact Precision Warehouse (805-835-7085). Bidder is responsible for shipping. Currency Type: USD Shipping Instructions: Please contact Precision Warehouse for general shipping and handling information. Precision Warehouse SERVICE TERMS AND CONDITIONS ACCEPTANCE OF TERMS Precision Warehouse/Sebae Data Solutions, (the makers of Auction Flex & HiBid (formerly Bidopia) hereafter referred to as "Sebae"), provides its service to you, subject to the following Terms & Conditions ("TAC"), which we may update from time to time without notice to you. The most current version of the TAC can be found found at any time by visiting the link: http://www.auctionflex.com/showtandc.ap USE AND REGISTRATION Our services are available only to, and may only be used by individuals who can form legally binding contracts under applicable law. Without limiting the foregoing, our services are not available to children (persons under the age of 18) or to temporarily or indefinitely suspended members. If you are under the age of 18, you can use this service only in conjunction with, and under the supervision of your parents or guardians. If you do not qualify, please do not use our service. If you are registering as a business entity, you represent that you have the authority to bind the entity to the TAC. REGISTRATION OBLIGATIONS In consideration of your use of the Service, you agree to: (a) provide true, accurate, current and complete information about yourself as prompted by the Service's registration form (such information being the "Bidder Information") and (b) maintain and promptly update the Registration Data to keep it true, accurate, current and complete. If you provide any information that is untrue, inaccurate, not current or incomplete, or Sebae has reasonable grounds to suspect that such information is untrue, inaccurate, not current or incomplete, Sebae has the right to suspend or terminate your account and refuse any and all current or future use of the Service (or any portion thereof). DESCRIPTIONS OF SERVICE Sebae provides the following services under the Auction Flex & HiBid trademarks: Integrated Web Service (for auctioneers), internet bidding (absentee, online-only, & webcast). You can learn more about these services in the following sections. HIBID INTERNET AUCTION PLATFORM & WEB SERVICE DESCRIPTION Sebae provides the HiBid (formerly Bidopia) Internet Auction Platform & Web Service ("HWS") under the HiBid trademark as a software solution for auctioneers wishing to extend the audience of their live auctions to the internet. The HWS provides various features including internet absentee bidding, internet-only auctions, and webcast auctions. The HWS is able to changes its appearance to coincide with the website that it is powering. Accordingly, the HWS powers the www.hibid.com website as well as numerous Auction Flex customer websites. This ability to change appearance is a feature of the HWS. Much like internet merchant account providers can host a secure web page for a vendor to easily process payments, the HWS hosts certain portions of the auctioneer's website to easily enable advanced features such as internet bidding. INTERNET ABSENTEE BIDDING Internet absentee bidding allows you to place a bid for an item in advance of an auction. This allows you to place bids on lots without actually attending the auction. INTERNET-ONLY AUCTIONS Internet only bidding allows you to place a bid for an item prior to the auction lot closing online. In an internet-only auction there is no live auction. WEBCAST AUCTIONS Webcast auctions allow you to bid in real-time against other bidders or place pre-bids prior to a lot going "live". Lots are sold in accordance with the Auctioneer's terms and conditions which are accessible from each lot's page. It is your responsibility to read and accept the Auctioneer's terms and conditions prior to placing your bid. When you place a bid you are agreeing to be bound by Precision Warehouse & Sebae's terms and conditions. By placing a bid you are entering into a legally binding and enforceable contract. Please keep in mind that you are bidding against other internet bidders as well as floor bidders, phone bidders, and regular absentee bidders (this list does not constitute a complete list of bidder types but does highlight the common bidder channels). Precision Warehouse, at their discretion, can approve or deny bidders. The auctioneer reserves the right to accept or deny bidders for any reason. Prior to approval Precision Warehouse may contact you to determine your credit worthiness. If the auctioneer approves your bid, the auctioneer will then process your bid in accordance with their terms and conditions. Should your bid for a lot prove successful, the auctioneer may contact you to arrange for payment & shipping (if applicable). If the auctioneer required registration via a credit card, the auctioneer reserves the right to process your winning bids to the credit card provided during registration. Sebae, through the Auction Flex & HiBid products & services, facilitates the internet bidding process between the Auctioneer & the bidder. Sebae is in no way a party to the transaction. Because Sebae is not a party to the transaction, you accept that you will have no claim or cause of action against Sebae in respect of the sale (or non-sale) of any Lot. If you have a dispute with an Auctioneer or another user of the Service with regard to the sale (or non-sale) of any Lot you agree that Sebae, its officers, agents, employees will not be liable for losses (including, but not limited to, loss of profits, special loss, indirect loss and consequential los), costs, damages, liabilities, claims, demands and expenses of any kind arising out of or connected with such dispute. You also accept that none of the aforementioned are under any obligation to take any action to resolve any dispute between you and an Auctioneer Precision Warehouse/Sebae is not responsible for any typographical, pictorial or technical errors in information about Lots on the Site as provided by Auctioneers. Sebae does not evaluate Lots and does not act as a specialist or expert on any related subject matter.Precision Warehouse / Sebae makes no warranties or representation of any kind or nature with respect to Lots (including but not limited to representations or warranties as to the accuracy of description, genuineness, quality, authorship, attribution, provenance, period, culture, source, origin or safety). If you have any questions, e-mail the Auctioneer directly. In particular, make sure that you understand Precision Warehouse payment terms and shipping terms. BIDDING The Service requires you to login with your username and password prior to placing a bid on a Lot. Making bids with false information or with stolen credit card information is prohibited and illegal. Your user name and password are required in order to place internet bids. Making bids in a false name or with an invalid or stolen credit card is prohibited. Each bid carries the computer coding of the Internet provider which allows the individual user to be traced and Sebae may at its discretion release this information to enable legal action to be taken. Sebae may, in its entire discretion, refuse or remove bids where it suspects that bids contravene this prohibition. By placing a bid, you are making a binding and irrevocable offer to purchase the Item at any price up to the maximum bid amount you submit. If you win, you must complete the transaction, subject to any contractual right or other right at law to rescind the contract in certain circumstances. Failure to complete transaction without lawful reason is not only a breach of your contract with the Seller but also a breach of this User Agreement. The amount bid can be increased but cannot be decreased. The auctioneer may, at their discretion, allow you to withdraw and resubmit a bid in the case of bids containing an obvious typographical error. You may forward a request to withdraw a bid and resubmit a correct bid by immediately sending an email to the auctioneer, however, there is no guarantee that any bid will be withdrawn. Although Sebae will use best efforts to forward all bids, Sebae does not accept any responsibility for lost bids or problems with the recipient auctioneer's ability to process your bid. Moreover, Sebae cannot guarantee that bids received will be processed by the individual auctioneers. Please note that Precision Warehouse / Sebae's role is limited to the provision of the Site for dissemination and publication of information provided by the Sellers. THE WINNING BID The winning bid in an auction will be the highest bid that exceeds any reserve (if a reserve exists). In the case of equal bids, the earliest bid received will be the winning bid. If a higher bid is subsequently withdrawn or removed then the auctioneer shall have the right to accept the next highest bid. NOTICE OF END OF SALE, PAYMENT & SHIPPING After the sale has ended, the auctioneer will notify the winning bidder via phone, fax or mail that they have won. If you do not receive notice that you have made the winning bid and think that you are the top bidder, you should check with the auctioneer directly. You will make all payment for Items to the auctioneer in accordance with their terms and conditions. BUYER'S PREMIUM, TAXES AND DUTIES If you are a successful bidder, you are responsible for paying any buyer's premium, taxes and duties (including any VAT, sales tax and import duties) that may be imposed on the final price paid for an Item. Accordingly, it is your responsibility to check the applicable taxes and duties that may be imposed on an Item prior to bidding for it. PRIVACY We do not sell or rent your personal information to third parties for their marketing purposes without your explicit consent and we only use your information as described in the Privacy Policy. COPYRIGHT All material and content as provided by the Service is protected by copyright and similar rights. You can not use or make available any of that material for any commercial purpose. SPECIAL ADMONITIONS FOR INTERNATIONAL USE Recognizing the global nature of the Internet, you agree to comply with all local rules regarding online conduct and acceptable content. Specifically, you agree to comply with all applicable laws regarding the transmission of technical data exported from the United States or the country in which you reside. DISCLAIMER OF WARRANTIES You expressly understand and agree that: a. Your use of the service is at your sole risk. The service is provided on an "as is" and "as available" basis. Precision Warehouse / Sebae expressly disclaims all warranties of any kind, whether express or implied, including, but not limited to the implied warranties of merchantability, fitness for a particular purpose and non-infringement. b. Precision Warehouse / Sebae makes no warranty that (i) the service will meet your requirements, (ii) the service will be uninterrupted, timely, secure, or error-free, (iii) the results that may be obtained from the use of the service will be accurate or reliable, (iv) the quality of any products, services, information, or other material purchased or obtained by you through the service will meet your expectations, and (v) any errors in the software will be corrected. c. Any material downloaded or otherwise obtained through the use of the service is done at your own discretion and risk and that you will be solely responsible for any damage to your computer system or loss of data that results from the download of any such material. d. no advice or information, whether oral or written, obtained by you from Sebae or through or from the service shall create any warranty not expressly state in the TAC. LIMITATION OF LIABILITY You expressly understand and agree that Sebae shall not be liable for any direct, indirect, incidental, special, consequential or exemplary damages, including but not limited to, damages for loss of profits, goodwill, use, data or other intangible losses (even if Sebae has been advised of the possibility of such damages), resulting from: (i) the use or the inability to use the service; (ii) the cost of procurement of substitute goods and services resulting from any goods, data, information or services purchased or obtained or messages received or transactions entered into through or from the service; (iii) unauthorized access to or alteration of your transmissions or data; (iv) statements or conduct of any third party on the service; or (v) any other matter relating to the service. EXCLUSIONS AND LIMITATIONS Some jurisdictions do not allow the exclusion of certain warranties or the limitation or exclusion of liability for incidental or consequential damages. Accordingly, some of the above limitations of of the previous two sections titled 'Disclaimer of Warranties' and 'Limitation of Liability' may not apply to you. INDEMNITY You agree to indemnify and hold Sebae harmless from any claim or demand, including reasonable attorneys' fees, made by any third party due to or arising out of your breach of this Agreement or the documents it incorporates by reference, or your violation of any law or the rights of a third party. LEGAL COMPLIANCE You shall comply with all applicable domestic and international laws, statutes, ordinances and regulations regarding your use of our service and your bidding on, listing, purchase, solicitation of offers to purchase, and sale of items. GENERAL INFORMATION The TAC constitute the entire agreement between you and Sebae and govern your use of the Service, superseding any prior agreements between you and Sebae. The TAC and the relationship between you and Sebae shall be governed by the laws of the State of Florida without regard to its conflict of law provisions. You and Sebae agree to submit to the personal and exclusive jurisdiction of the courts located within the county of Marion, Florida. The failure of Sebae to exercise or enforce any right or provision of the TAC shall not constitute a waiver of such right or provision. If any provision of the TAC is found by a court of competent jurisdiction to be invalid, the parties nevertheless agree that the court should endeavor to give effect to the parties' intentions as reflected in the provision, and the other provisions of the TAC remain in full force and effect. You agree that regardless of any statute or law to the contrary, any claim or cause of action arising out of or related to use of the Service or the TAC must be filed within one (1) year after such claim or cause of action arose or be forever barred.
********This Auction will be in West Covina, Ca. 91723******** This a smaller auction with a lot of automotive machinery equipment . Some of the other items you will find are an Auto Lift, Welders, Sunnen Equip, Mill, Lathe, and much more. Good selection of engine blocks, heads, and misc auto parts Auction Preview will be August 22nd, 9am -4pm Auction will close it's first lot right at 7pm August 22nd, 2020 **********This Auction has a 3 days for all items to be picked up*********** ********* We will be open Sunday day after Auction for item pick up.*********** All items must be paid for by Monday, August 24th , 4:00 pm or we will charge your card on file **************All items must be picked up at 667 E. Edna Pl West Covina, within 3 days after auction. Items not picked up by 4pm on August 25th, 2020 will be consider abandoned.( no refunds and reported negative HiBid feedback) We ask everyone to please pick up their items as soon as they can. Forklift will be onsite for all items that need to be loaded. **READ BELOW. Important Auction Information 1.) Register to bid. At the top of your screen you will see a button labeled "Login/New Bidder". You will need to click this and fill out the basic information to create your new account or login to your existing account. If you have bid with us in the past and have forgotten your Username or Password, you can reset them from there. There is no charge to register and bid, you only pay if you win an item. The credit card on file will be validated by our software company. This means they will put a "hold" on your credit card for $1 and then reverse that charge within 24 hours. This ensures the card is valid and that you are bidding against only other valid bidders. 2.) Preview the entire catalog early and often. New items are added to the catalog as they come in to the warehouse and can sometimes fall on different pages depending on where they are placed in the building. It isn't unusual for new items to be added just minutes before the auction begins. 3.) Pick the items you would like to bid on and PRE-BID with realistic numbers. We can not stress this enough. Items can be lost in the final seconds due to last second bids, Internet outages, power or site failures. The computer will bid on your behalf up to your maximum amount if some else places a bid. EXAMPLE A.) You place a bid of $100 for an item. Someone else bids $50 and nobody else bids, you win your item for $55. EXAMPLE B.) You place a bid of $100 for an item. Someone else bids $100 and nobody else bids, you will still win your item at $100 because it is the first bid. EXAMPLE C.) You place a bid of $100 for an item. Someone else bids $110 in the final seconds. Bidding extends 2 minutes and you will only have 2 minutes total to bid again. 4.) PLEASE READ the terms and conditions. All bidders are bound by the same terms and conditions for this auction included payment options, pickup times and other things important to the auction. Most questions will be answered on our website, but if you have one that isn't you can call us @805-835-7085 and we will help you. 5.) Have fun and save money! Precision Warehouse has revolutionized the way auction items are being sold with our Internet Platform. Do not under estimate how much money you can save. We have buyers every month from several hundred miles away who cannot believe the savings! Bidding Notice: Bidding Notice: Bidding open now. We encourage you to leave maximum bids and have the computer bid on your behalf as the live portion of the auction moves very quickly! NOTICE: Please click and read the "Auction Details" section. This will give you information on payment, pickup times, bid increments and the terms and conditions of the auction. All items in this auction are sold AS-IS condition. Please NOTE: Items will be added for bidding daily until the auction time! If you are the winning high bidder you are responsible for paying for that item. Please read out terms and conditions before bidding

1
Blasting Cabinet
ABS Products Serial# 3509104 Model V-200 4828

2
Parts Washer
EMC Model# 80E VAC 220 Hz60 Ph3 FLA 40

3
Lathe
LeBlond Regal Line Volts 220/440 Cycles 50/60 Phase 1 F. L. Amps .2

4
DoAll Bandsaw
DoAll Metal Master

5
Brideport Mill
Trak Digital Positioning Readout System

5
Snap-On Rolling Tool Box w/Cabinet Attachment
31" (46" with attachement) x 21 x 38"

6
Sunnen CK-10 Powerhone
Automatic cylinder resizing machine Misc accesories included

7

8
P&H AC/DC Arc Welder
Model# DAR-300HFGW Misc rods and bottle of argon included 208-230-460v SIngle Phase AC/DC Welder

8
Yale Propane Forklift
Runs New forks Needs seat and new tires Side shift hose leaks

9
Fly Wheel Surface Grinder
5Hp motor 230-460v 3 Phase

10

11
Millermatic 251 Wire Welder
Mig welder w/ bottle of compressed gas

11
Acetylene Cutting Torch Set
No oxygen bottle included Regulators, hose, cutting torch and one bottle.

12

13

14

15
Turntable for Mill
For Precision Machining

16

17

18

19
Pallet of 2 Shelves, 1 Cabinet w/ Doors
48x12x72" Cabinet is 48x18x72"

20

20

21

22
Cabinet w/ Various Machinery Parts
Wheel turning devices Cam shaft Rod Misc collets Vise jaws & More

23
Vibra-Motive Surface Grinder
by Peterson Welding Lab

24

25

25
Gobby Tricycle
Model 7112

26
Battery Charger
Marquette 39-100 Battery Charger

26

27

28

29

30
Sunnen Heavy Duty Cap & Rod Grinder
Model CRG-750K 155v 8.6amp 60hz ph 1

31
Sunnen Heavy Duty Precision Honing Machine
Includes precision gauge for pin fitting and rod reconditioning Model LBB-1499

32
Rod Tumbler
Steelabrator from Abrasive Equipement Supply Co 230v Single phase

33
Hydraulic Press
F.A. Nugier Co Model H40 40 ton capacity

34
Ingersoll-Rand Industrial Air Compressor
w/ Air cooler, 2 Cylinder, Single phase Model 1545

35
Winona Van Norman Seat Cutter & Table
Tools included Typre RV12 NR 8909

36

37
Pneumatic Valve Master Hydraulic Valve Spring Comp
Vinkler valve master hydrualic valve spring compressor

38

39

40
Sunen BP-10K Press
Capacity 10 tons 115v 8.6amp 60hz 1 ph

41
Kwik-Way Valve Grinder
Model 012 115v 60 cycles 11amps ph 1

42

43
Lathe 12x66
Variable speed

44

45
Pro-Lift 2 Post Lift
208-230v Single phase 2hp motor Unknown condition Approx 9,000lbs

46

47
Valve Seat Grinding Bench
Misc tools included

48
Floor Mount Jib Crane
Vertical 10' Horizontal 11'

49

50
Table w/ Vise
51x34.5x59" Columbian Vise, 4" jaw

51
Metal Shop Table Heads Not Included
79" x 32" x 34" Metal table only in this lot

52

53
3 Boxes of MIsc Helicoil Coils
Installation tools included

54
Sunnen AG-300 Precision Gauge
for pin fitting and rod reconditioning

55

56

57

58
8 Hubcaps
4 Lincoln Continental 2 Lincoln, 1 Ford, 1 Chevy Great for wall art

59

60

61

62

63

64

65
Misc Lot
2 Slide hammers 2 Oil Cans Quadrajet carburetor

66

67

68

69

70

70
Toyota Land Cuiser 1F Motor
Long block Had new valves, been sitting Block needs light honing Will include misc parts of engine

71
5 Misc Blocks
No main caps

72
6 Blocks
Some w/ main caps, some without

73
4 Misc Blocks w/ Main Caps
2 Fords Small Block Chevy 4 bold main

74
Lot of 4 Long Blocks
3 Chevy 1 Pontiac need rebuilt

75

76

77
Box of Misc Bearings
Multiple brands, cars

78
Lot of Misc Piston Rings
Various brands and sizes

79

80

81

82
3 Sets of Pistons
Big Block Chevy Ford 408 cubic inch Piston for 6 cylinder

83
Misc Automotive Parts
Timing belt Lifters Oil filter

84

85
Rolling Steel Shop Cart w/ Steel Wheels
42" x 25" x 31" Dual rear wheels

86

87
Metal Cabinet of Misc Intake and Exhaust Valves
Valves new in box Cabinet: 31x12x36"

88
Metal Cabinet of Misc Intake & Exhause Valves
Valves new in box Cabinet: 31x12x36

89

89

90

91
5.0L Fox Body Mustang Motor
Late 80's w/ accesories unknown history

92
Craftsman Grinder
1/3 hp grinder Ball bearing Split Phase Motor 3450 RPM Model 39719580

93
Kurt 6" Mill Vise
Kurt Mfg Co Precision Machine Vise

94

95

96

97
Valve Covers & Timing Chain
3 Corvette Valve Covers Small block Chevy timing chain

98

99

100

101
Melling Oil Pump
Ford New Made in USA

102

103
Big Block Chevy Heads
Par# GM6272292

104
Big Block Chevy 454
New pistons, 7 in, 1 out Has harmonic balancer

105

106

107

108
Ford Heads
71-74 Cleveland V8 Cores

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128
Chevy Small Block 383 Crankshaft
3800 Stroke Mains are standard 350 Cubic in sice '86 & newer

129

130
Lot of 8 Cylinder Crankshafts
6 cylinder x 2 4 cylinder x 6

131

132

133

134

135

136

136

137

138

139

140

141

142

143

144

145

146

147
Misc Hand Tools
With tool bag

148

149

150

151
Pullers & Clamp
3 Pullers 1 Clamp

152

153

154

155

156
Bearing Puller & Separator Set
With case Pittsburg Model 93980

157

158
MicroMeters Set Of 5
Brown & Sharpe 3" -4" Model 203 3" 2"

159
Large Calipers
Set of 2 1 wood case

160
Calipers Mitutoyo
Lot of 2 One is a Mitutoyo

161

162

163

164

165

166
Small Tap & Die Set w/Wooden Case
With Universal Bolt & Groove Gauge

167
2 Micrometer 50-75mm, 25mm-0.01mm
Made by Mitntoyo With Sharpening Stone Bonus

168

169
7 Misc Micrometers
Various sizes between 1" and 7"

170

171

172

173

174
Helicoil Sets
Various Sizes

175

176

177

178

179

180

181

182

183

184

185

186

187
Blue Point & Kobalt Impact Guns
Blue Point 3/8 Drive Kobalt 1/2 Drive

188

189

190

191
Misc Shelf Lot
Piston Rings & Crankshaft Bearings

192
Misc Shelf Lot
Misc Auto Parts, Valves,Springs, Crank Rods, Water Pump

193
Misc Shelf Lot
Crank shaft weights, Rocker Arms, Pistons

194
Misc Shelf Lot
Misc Auto Parts Head Studs, Ford Valve Springs, Crank Bearings

195
Misc Shelf Lot
Top End Gasket Set

196
Misc Hand Tools
Taps & Dies Clamps Misc Tools

197
Misc Hand Tools
Large Sockets Craftsman Tools

198
Misc Valves
Various Sizes

199
Mill Chucks
Lot of 5 Some are Jacobs Chucks

200
Taps & Dies
Various Sizes

201

202

203

204

205

206
Misc Crank Shafts
Lot of 20 Shafts

207

208
6 Cylinder Core Heads
Sold as a pair

209

210
GM Core Heads
Sold as a pair

211

212

213

214

215

216

217
4 Misc Heads
Chevy & Ford

218

219
Aluminum Valve Covers/GM Alternator
Mickey Thompson/Offen Hauser

220

221
Enco 6" Carbide Grinder
Model TG302 115v 3450rpm

222

223

224

225

226

227
Pallet Jack
Working condition

228
Metal Organizer Metal Bins
Each bin is 6x9x8" Lot of 2

229
24 Drawer Bin Cabinet
Misc nut & bolts as contents Steel cabinet

230
6" Right Angle Plates/Flywheel Grinding Stone
Goodson Flywheel grinding stone

231
Scale Weights
Lot of 9 weights

232
Misc Lathe Tooling
Various items

233
Misc Lathe Tooling
Various items

234
Misc Lathe Tooling
Various items

235
Misc Lathe Tooling
Various items

236

237
Metal Storage Cabinet w/ Some Contents
Comes with all contents on the left side 56x20x40"

238
Rolling Metal Cart
24x27x40" Contents NOT Included 5 shelves

239
Drill Bits
Misc sizes

240
Drill Bits
Misc Sizes

241
Drill Bits
Misc Sizes

242
Drill Bits
Misc Sizes

243
Drill Bits
Misc Sizes

244
Drill Bits
Misc sizes

245
Reamer Bits
Various Sizes

246

247
Drill Bits
Misc Sizes

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262
Wrenches
Various sizes and brands

263
Misc Tools
Saw Channel locks Goggles and More

264
Misc Tools
T-Handle Allen Keys Mallet Saw Handle and More

265

266
Misc Tools
Wrenches Stapler Saw and More

267

268

269

270

271

272
Misc Lot
Nut Driver Set Gauge

273
Name Brand Sockets
1/2 & 3/8" Craftsman deep socket set 1/2" Craftsman short sockets 1/4" Craftsman deep socket Misc deep sockets, SU brand and others

274

275

276

277

278

279
Misc Sockets
Various sizes Stud extractor & spark plug

280

281
Misc Ratchets & Sockets
Ratchets:1/4, 3/8, 1/2" Extensions: 3/4, 1/2, 3/8"

282

283

284
Misc Lot
Various pullers Clutch allignment tool

285
Misc Bin
Blue-Point stone honing set Tap & die handles Block tester w/dye Engine Block dye Nut extractors

287
Gobby Tricycle
Model 7112

286