THIS IS A COMPLETED SALE
View current listings by this company

Vanleer Hardwoods Inc - Liquidation Auction - Vanleer, TN
Previous Page Listing ID#: 1641012

Auction Location
Vanleer, TN 37181

Auction Dates and TimesSALE IS COMPLETED
Friday Aug 23, 2024 Completed

Auction Type
Live Auction

Company Information
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings

Free Email Notifications

Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.

Listing Terms and Conditions
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer. Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms. Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required. Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer: “Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction. “Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction. Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration. Governing Law. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana. Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium. Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion. Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement. Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms. No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer. Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online: Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification. Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder. Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion. Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder. Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction. Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property. All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING. Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings. Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property. Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer. Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller. Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction. Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid. Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer. All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS. Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made. Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion. Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers. ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information. Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid. No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number. Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death. Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required. Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions. Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer. Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession. Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief. Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages. Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property. Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium. Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller. Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site. Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial. Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Terms and Conditions

Bidder Terms and Conditions
There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items.
These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

“Absentee Bid” means a bid submitted in advance by an Absentee Bidder for the execution during the Auction.
“Absentee Bidder” means a person or entity that submits an Absentee Bid.
“Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION.
“Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids.
“Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected.
“Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder.
“Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms.
“Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer.
"Buyer" means the Winning Bidder with respect to each Lot of Personal Property.
"Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account.
“Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation.
“Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer.
“High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot.
“High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price.
“High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot.
"Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event.
“Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer.
“No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale.
“Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions.
“Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online.
"Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered.
“Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers.
“Personal Property” means all tangible and moveable property, including fixtures, designated as Property.
“Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer.
“Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer).
“Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction.
“Property” means the Real Property and the Personal Property.
“Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium.
"Registered Bidder" means a person or entity that has registered to bid at the Auction.
“Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction.
“Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE.
“Reserve Price” means the minimum price that Seller is willing to accept for specific Property.
“Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer.
“Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid.
“Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller).
"Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid.
“Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Information
Join us for this absolute liquidation auction as we conduct the Vanleer Hardwoods Inc auction on August 23, 2024, starting at 9 AM Central Time. This onsite and online virtual auction, located at 4400 Highway 49 W, Vanleer, TN 37181, specializes in sawmill and rolling stock equipment. Highlighted items include a Cleereman Mill, Late Model John Deere Skidder, Cat High Track Dozier, John Deere Knuckleboom, and several rubber tire loaders. Preview dates are available on August 22, 2024, from 9 AM to 4 PM or by appointment through Zach Kittrell at 931-224-0699. Don’t miss this opportunity to acquire quality equipment as Vanleer Hardwoods Inc is liquidating its current equipment to build a new mill in the spring! This is an absolute auction with no minimums and no reserves—the highest bidder will be the new owner! 00 Information Lot Type of Auction: Sawmill and Rolling Stock. Highlight Pieces: Cleereman Mill, Late Model John Deere Skidder, Cat High Track Dozier, John Deere Knuckleboom, and several rubber tire loaders. Auction Specialist: Zach Kittrell 931-224-0699. Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with. 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Aug 22, 2024 from 9am-4pm or by appointment. Zach 931-224-0699 Location of Auction: 4400 Highway 49 W, Vanleer, TN 37181 02 Loadout Information Equipment removal within 30 days. Load out for smalls will be available by a Bright Star Staff member, Friday, August 23rd until 6 pm and Saturday August 24th 8am-4pm. Please make arrangements during this time frame to pick up all palletized items. 03 Rigging Information RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. Recommended Rigger: Paul Avery 270.543.1919 04 Payment Information Payment terms: 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 80 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 81 Heavy Equipment Key Set 36 Keys Shipping available for $20 82 SDRTOP Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 93 Stihl MS 271 Chainsaw 20" bar, includes 1 extra 20" bar with chain, and (1) 25" bar 94 Makita Electric Chainsaws Both Models: UC4051A, both have 16" bars, 110V plug-in, includes 1 extra 16" bar with chain and (1) 20" bar 95 Jockey Grinder Model: 06H, mounted on electric Milwaukee drill 95A Jockey Grinder Mounted on electric Milwaukee Drill 95B Jockey Grinder Model: 97E, mounted on Milwaukee electric drill 95C Saw Grinder Mounted on electric Milwaukee drill 96 Fromm Seal-less Strapping Tool Model: A-335, SN: 0137707 96A Fromm Seal-less Strapping Tool Model: A335, SN: 0138642 96B Fromm Seal-less Strapping Tool SN: 0138993. Model: A335. 97 Lumber Grading Tools (2) grader sticks, (1) crayon holder 98 Lumber Grading Tools (1) grader stick, (1) crayon holder 99 Lumber Grading Tools (1) grader stick, (1) crayon holder 100 HMC V206HST Rosserhead Debarker SN: 1606-95, 14" x 36" x 24" hydraulic tank, electric motor with gearbox and hydraulic pumps under cab, 4' x 4' x 75" tall cab with AC unit and all controls, 2 7/8" shafts, 3" x 24" bull wheels, air cylinders on log kickers, 7' x 33' overall, 30 hp electric motor on head, slant track, includes barn sweep-42" x 27" flat section, 30' incline section with electric drive and 15" paddles 101 3 Strand Log Deck with Stop'n'Load Hydraulic drive with Tulsa Gearbox, hydraulic cylinder on loading arm, H78 chain, includes support steel to ground, 10'6" x 18'6" x 7' tall 102 Morbark Log Trough 12" ladderback chain, hydraulic drive, hydraulic cylinders on kickers, 52" x 41' long 103 5hp Hydraulic Pack 24" x 36" x 12" tank, includes all hydraulic hoses to equipment 104 2005 Cleereman 36 3HB Carriage (1st of an entirety) Model: 36, SN: 36-886-05, Silvatech computerized setworks, includes all controls, monitors, and electric panels in operator's cab, 4 axle, 78" x 16', pantograph, air dogs, 3/4" dogs, includes laser mounted to rafters, HB spacing- 1st to 2nd-78", 2nd to 3rd-54" 105 Carriage Track and Frame (Part of an entirety) 55' of track, 64' long overall, includes frame to ground, does not include carriage feed or pulley, mounted to track, track is 50" center to center 106 Cleereman Carriage Drive and Feed (Part of an entirety) Model: HYD-50, SN: 182-05, 50 hp electric motor, 30" x 46" x 22" tank, cooling unit, main pump drive, idler pulley, and spool of 3/4" carriage cable mounted in track, includes all hydraulic hoses to equipment, includes new extra sprocket for cable reel 107 Cleereman 60" Husk with Top Saw (Part of an entirety) 56" F8 style saw, 30" F8 style top saw, 30 hp electric motor on top saw, main electric drive mandel, not included, 22" x 5' off-bear belt with electric drive, 9' x 12' overall, included support steel under cab and edger, includes skid pan to barn sweep 108 Westinghouse Electric Motor (Part of an entirety) 150 hp, 1780 rpm, 460V, 445T frame 109 WEG SSW-07 Soft Start (Part of an entirety) 150 hp, SN: MC20737, 480V, 200 amp, includes 1' of conduit on both sides of box 110 Mellott 48" Chain Type Log Turner and Nose Skids (Part of an entirety) Hydraulic drive and cylinder, includes control valve under cab, 4' x 10'6" nose skid section 111 Vertical Edger (Part of an entirety) (2) 20" F8 style blades-both moveable, 6 1/2" x 30" capacity, 40 hp electric motor, hydraulic cylinders for blade movement, 8" x 10" x 18" hydraulic tank, laser lights 112 Cleereman 30hp Hydraulic Pack (Part of an entirety) Model: 30H34GY40FC, SN: 186-05, 30 hp electric motor, cooling unit, 18" x 48" x 27" tank, spill tray, valve station, pumps, includes all hydraulic hoses to equipment 113 Cleerman Operator's Cab (Part of an entirety) 54" x 6' x 80" tall, does not include any controls or support steel, has AC unit, includes catwalk steps to cab 114 2005 Cleereman 36 3HB Carriage Entirety of Lots 104-113 With 10% raise. 115 3 Strand Log Deck with Stop'n'Load Hydraulic drive with Tulsa Gearbox, 10'6" x 23'6" x 64" tall, H78 chain, hydraulic cylinder on loading arm, includes support steel to ground, does not include nose skids 116 Belt Conveyor Electric drive, 20 1/2" belt, 32" x 37' x 56" tall 117 56" Circle Saw F8 style, good condition 118 56" Circle Saw F8 style, good condition 119 56" Circle Saw F8 style, good condition 120 56" Circle Saw F8 style, good condition 121 56" Circle Saw F8 style, good condition 122 56" Circle Saw F8 style, good condition 123 3 Strand Green Chain Electric drive with Tulsa gearbox, C55B rooftop chain, 10' x 39' x 4' tall, 5' x 10' unloading nose skids on end 124 Vertical Edger Blades 3 pieces; (2) 20", 4" arbor, F8 style; (1) 20", F8 style, needs new arbor 125 Morbark Chip-Pac (1st of an entirety) 48"-3 knife chipper with 15" knives, new clamps, knife holders, and counter knife on 12/15/2023, includes (9) sharpened knives, 5' x 6' shaker screen with 1 1/2" holes, 2' x 4' cyclone, electric drive on shaker, does not include main electric drive for chipper 126 WEG Electric Motor (Part of an entirety) 75 hp, 364/5T frame, 460V, 1775 rpm 127 Motor Starters (Part of an entirety) WEG SSW-06 Soft Start (SN: 1013525119, 75 hp), starter panel for shaker, blower, etc. 128 Morbark 24" Chip Blower (Part of an entirety) Electric drive, top feed, 12" x 9'6" chip chute 129 Morbark Chip-Pac Entirety of Lots 125-128 With 10% raise. 129A Mellott Vibrating Conveyor Electric drive, 19" pan, 4" sides, includes chipper infeed section, 26" x 38' long 130 Rollers 4 1/2" x 45", 26 pieces 131 Ingersoll-Rand Air Compressor Meter reads: 36,962 hours, Model: SSR-UP6-25-150, SN: PX8649U07103, 460V, 3 ph, 150 max psig, 120 gallon horizontal tank, made in 2007, includes electric panels on wall as marked, includes 120 gallon holding tank under debarker, includes all air line to equipment 132 Barn Sweep Electric drive, 14" paddles, includes all pan covers in building, 156' of chain throughout building-no pan, runs from husk to chipper 133 Barn Sweep Electric drive, 14" paddles, no pan, 32' long or 64' of chain located under carriage track 134 Barn Sweep Electric drive, 14" paddles, 18' flat section-no pan-under husk to side of building, 4' x 30' incline section 135 Electrical Panels Includes all panels in room behind mill not lotted otherwise, does not include any conduit, (2) 400 amp disconnects, transformer, (2) power capacitators, disconnects, and starters, includes 1' of infeed and outfeed wire on all boxes 136 Electrical Panels Includes all panels on back wall of mill building as marked, 1' of infeed and outfeed wire included to each panel, no more conduit included, (5) 200 amp disconnects, (2) Nema size 4 starters, (1) Nema size 3, lots of smaller starters 137 Conduit Includes all conduit from lots 135 and 136 to equipment, 1' of wire to be left on all panels and motors, includes junction conduit boxes, does not include any electrical panels or 110V conduit 138 110V Electrical Includes 110V breaker panel, includes all 110V conduit, wiring, and lighting in mill building 150 HMC Barn Sweep Pan Model: WC3, SN: 669-80, no chain or drive, 15" max paddle size 151 Concrete Slab 45" x 22' x 12" thick, 38" x 30' long 152 Stacking Sticks 43" x 7' x 45" tall rack, 3/4" x 1 1/4" x 48" sticks, 1/2 poly sticks, 1/2 mixed species, approx. 2300 pieces total 153 Stacking Sticks 3/4" x 1 1/4" x 48" poly sticks, approx. 1350 pieces 154 Stacking Sticks 3/4" x 1 1/4" x 48" poly sticks, approx. 1350 pieces 155 Catwalk Section 2' x 6' top platform, 2' x 9'6" x 2' tall overall 156 Pusher Attachment for Loader 36" x 68" push plate, 19' long, 4 1/2" x 9 1/2" x 5' long fork pockets 157 Log Rack 97" x 102" x 122" tall overall, 82" x 90" x 62" high storage on top 158 Log Rack 97" x 102" x 122" tall overall, 82" x 90" x 62" high storage on top 159 Slab Rack 52" x 7' x 42" tall. 160 Slab Rack 45" x 6' x 30" tall 161 Tie-Stacking Rack 6' x 7' x 44" tall 162 Tie-Stacking Rack 7' x 90" x 44" tall 163 Jib Crane 8" max fork width, 6" tube steel-13' long 200 2017 Komatsu WA 270-7 Wheel Loader Year: Approx. 2014 (unsure on the exact year). SN: 81293 (PIN: KMTWA122LEA081293). Meter reads: 8,746 hours. Engine: Komatsu SAA6D (SN: 26634151). Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Center to center of pins: 19". Tire Size: 20.5R25. Attachments: None included. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Starts, runs, and operates. Has backup cam 201 2017 Cat 930K Wheel Loader SN: CAT0930KPRHN02786. Meter reads: 13,177 hours. Engine: Cat C7.1 (SN: C8N15976). Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Center to center of pins: 25". Tire Size: 20.5R25. Attachments: None incuded. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Starts, runs, and operates. 202 Cat 928G Wheel Loader SN: CAT0928GCDJD02387. Meter reads: 17,283 hours. Engine: Perkins Turbo. Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Center to center of pins: 26". Tire Size: 20.5R25. Attachments: 7x60" pin-through forks-78" wide. Heater: Yes. A/C: No. Quick Attach: No. Features and Notes: Starts, runs, and operates. 203 CAT 930 Wheel Loader SN: 41K12487. Meter reads: Meter is broken. Engine: Cat 3304 (SN: 78P42038). Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Center to center of pins: 22". Tire Size: 17.5R25. Attachments: 7x48" pin through forks-54" wide. Heater: No. A/C: No. Quick Attach: No. Features and Notes: Starts, runs, and operates. Has a new tire! 204 Cat Loader Forks Quick attach, 6" x 55" forks, 64" wide, 74" high, mounted on lot # 201 205 Rockland Loader Forks Model: LF, SN: 65860, Quick attach, 7" x 55" forks, 70" wide, 45" high, mounted on lot # 200 206 Cat Loader Bucket SN: 140701926, quick attach, 3.0 cubic yard capacity, 45" x 100" x 4' tall 207 JRB Loader Bucket SN: J0001010691, 42" x 105" x 45" tall, quick attach, 3 cubic yard capacity 209 Sawdust Bucket Slip-on fork pockets, 50" x 8' x 45" tall, built of 3/8" plate steel 210 Loader Bucket 36" x 94" x 45" tall, pin through style 214 2017 John Deere 648 L Dual Arch Grapple Skidder SN: 1DW648LXCHF680748. Engine: John Deere 6068. Meter reads: 9,272 hours. Rebuilt engine: No. Tire size: 35.5L32. Tire chains: No. Blade size: 9'8". Grapple: Yes. Cable winch: Yes. ROPS: Enclosed. Heat: Yes. AC: Yes. Type of controls: Joystick with swivel seat. Features and Notes: John Deere Winch (SN: T04000X004515), with 1" cable. Starts, runs, and operates good. 215 2003 Cat D6N XL Dozer Meter reads: 7,764 hours. Engine: Cat 3126. Fuel type: Diesel. HP: 260. Blade: 10'6"-6 way. ROPS: Open. A/C: No. Heater: No. Features and Notes: 22" tracks, high-track. Starts, runs, and operates well. 216 2014 John Deere 437D Knuckleboom SN: 1T0437DDTFC286269. Meter reads: 12,267 hours. Engine: John Deere 6068 (SN: PE6068H975542). Fuel type: Diesel. Continuous Grapple: Yes, Rotobec 4552 HD (SN: 114204-1-1). Trailer: Big John Trailer with hydraulic landing gear. Delimber: Yes, 39" bar. Bucksaw Hookups: Yes. A/C: Yes. Heater: Yes. Features and Notes: 11R22.5 tires, fully enclosed cab with tint, radio, and pilot joystick controls. Starts, runs, and operates. 217 CSI DL-4400 Classic Bucksaw Direct drive, 48" bar, 75" x 19'6" log rack 221 2000 Freightliner Century Class 120 Truck VIN #: 1FUYSSEB7YLG35192. Mileage: 1,128,125. Engine Type: Detroit Series 60. Fuel Type: Diesel. Horsepower: 430. Transmission: 10 speed Eaton Fuller. GVWR: 52,000 lbs. Front axle rating: 12,000 lbs. Rear axle rating: 20,000 lbs. Heat: Yes. Wet kit: No. Features and Notes: 11R22.5 tires. Starts and runs. 225 Log Trailer 11R24.5 tires, 4 bunk, 86" wide x 6' tall bunks, 38' long, bunk spacing: front to back 9'-15'-9' 230 1984 Fruehauf Chip Trailer VIN: 1H2V04521EE001571, GVWR: 68,000 lbs., 45' long, 11R22.5 tires, 98" inside width, 108" inside height, half door in rear 231 Open Top Chip Trailer GVWR: Approx. 65000 lbs., 92" inside width, 88" inside height, 40' long, 11R22.5 tires, tarp top, 92" inside width, 104" inside height, tarp top 232 Open Top Chip Trailer GVWR: Approx. 65000 lbs., 11R22.5 tires, 40' long, 92" inside width, 104" inside height, tarp top 233 Chip Trailer GVWR: Approx. 65000 lbs., 11R22.5 tires, 40' long, 92" inside width, 94" inside height 241 Shop-Built Trailer Dolly 10.0-20 tires, 2 axle, 5th wheel hitch, pin-through hitch, was pulled behind loaders 242 Shop-Built Trailer Dolly 10.0-20 tires, single axle, 5th wheel hitch, pin-through hitch, was pulled behind loaders 250 Chipper Knife Grinder Electric drive, holds (2) 15" knives, 3' x 6', does not include chipper knives 251 Cutting Torch Set Includes cart, gauges, leads, torch, tanks 252 Miller Bobcat 225G AC/DC Welder/8000 Watt Generator SN: KF909317, 120/240V output, wire and stick welder, meter reads: 574 hours, Onan Performer 16 gas engine, includes leads, mounted on cart with wheels 253 Cabinet with Parts 18" x 3' x 6' tall, includes all contents, hand tools, chain parts, saw bits and shanks 254 Air Compressor 15 hp electric motor, 24" x 64" horizontal air tank, includes Van Air single tower air dryer and heat exchange unit, includes all air line hose from compressor to equipment 255 Table with Parts 12" x 50" x 32" tall wooden table, 2 hydraulic motors, gear chain, 6 brand new bearings 256 Rolling Tool Chest 28" x 30" x 42" tall, includes all contents, wrenches, hand tools, misc. hardware and parts 257 Knife Grinder Electric drive with 110V plug-in, 36" long clamping bench, 20" x 4' x 56" tall overall 258 Werner 8' Step Ladder 300 lbs. capacity 259 Extension Ladder 16' max, includes step stool 260 Fluids Compressor fluid, gear oil, grease tubes, assorted oils 261 Craftsman Power Washer 110V plug-in, 1900 psi, 102 gpm, includes 25' hose and wand 262 Floor Fan 30", on stand, 110V plug-in 263 Floor Fan 30", on stand, 110V plug-in 264 Box Fans (2) 18" fans, 110V plug-in 265 Floor Fan 24", 110V plug-in 266 Banding Cart Partial roll of 3/4" banding, snips 267 Banding Cart Partial roll of 3/4" steel banding, needs new wheels 268 Banding Cart Partial roll of 3/4" steel banding 269 Banding Cart Partial roll of 3/4" steel banding, needs new wheels 270 Garden Hoses 3 pieces, lengths unknown 271 Carriage Cable Partial roll of 3/4" coated steel cable 272 Wire Spool with Parts 36" x 27" tall spool, includes al parts on spool, hand tools, new bearing and pulley, air hose, partial spool of wire, sprocket, chain, 5 gallon cooler 273 Steel Angle iron, shaft-stock, threaded rod, pipe 274 Hand Tools Shovels, brooms, pry bar, 48" cant hook 275 Hand Tools Shovels, brooms, fork, pry bar, 24" cant hook 276 Hand Tools Shovels, brooms, pry bar, forks, scraper, sledge hammer 277 Barn Sweep Paddles 16-18" long, 15 pieces 278 Extension Cords and Air Hose 2 cords, (1) 3/8" air hose, lengths unknown 279 Parts Misc. belts, misc. hydraulic hoses, (2) 21" conveyor belts-lengths unknown 280 Lights and Heater (2) LED lights-110V plug-ins, 15 lbs. propane tank with heater 281 Catwalk Section 39" x 6' x 57" tall 282 Rebuilt Tulsa Winch Gear Box 283 Edger Blade 14", sharpened, 4" arbor 284 Trim Saw Blades (3) 18", sharpened, 1 1/2" arbor 285 Lumber Grading Tools 1 grading stick, 2 crayon holders 286 New Gearbox Brand new, never installed, made by Winsmith, 30:1 ratio, Size: E35, Model: XDNS 287 Parts Electrical parts, misc. sprinkler parts 288 Cabinet of Parts 18" x 3' x 6' tall, includes all contents, belt lacing, manuals, filters 289 Cabinet of Parts 18" x 3' x 6', includes all contents, welding rods and helmet bearings, sprockets, cylinders, clamps, filters 290 New Mandrel Shaft 2 3/16" x 44" 291 New Shafts (2) 1 7/8" x 26 1/2", (1) 2 3/16" x 26 1/2" 292 First Aid Kit 293 Office Furniture Bench, folding table, office chair, 2 folding chairs, 2 desks, DeWalt 18V drill with battery and case 294 Office Appliances 3 space heaters, 2 microwaves, 1 window AC unit 295 Antique Vending Machine 296 Kelvinator Refrigerator Electric 297 New Fluorescent Light Bulbs 300 Trailer Straps (4) 4" straps 301 2" Fire Hose 6 hoses 302 3" Fire Hose 3 hoses 303 3" Fire Hose 3 hoses 304 3" Fire Hose 3 hoses 305 3" Fire Hose 3 hoses, 1 needs end repaired 306 Banding New roll of 1" poly banding 307 Hand Tools Shovel, forks, sledge hammer, pry bar 308 Hand Tools Shovel, rake, cant hook, crow bar, cheater bar, 3' long 1" drive ratchet 309 Hand Tools Cant hook, sledge, pry bar, bolt cutters 310 Pipe Benders (1) 1", (1) 3/4" 311 Makita RBC 251 Weed Eater 312 Master Space Heater 140,000 BTU 313 Space Heaters (1) Heat Fast 75000 BTU, (1) Master 80000 BTU 314 Excel Power Washer 2500 psi, 2.2 gpm, 5.5 hp Honda gas motor 315 1" Pex Length unknown 316 Electrical Parts Wire, fuses, breakers 317 Chipper Parts Knife holders, counter knives 318 Conveyor Belts (1) 36", (4) 22", (1) 18", lengths unknown 319 Parts Tarp, extension cord, air hose, pvc fittings, sprockets, hydraulic hoses 325 Pipe Wrenches All Ridgid, (1) 12", (1) 14", (1) aluminum 14", (1) 18", (1) 24" 326 Makita Electric Chainsaw 16" bar, 110 plug-in, 3 extra bars 327 3 1/2" Bench Vise 328 Bench with Contents 42" x 98" x 3' tall, includes all contents on bench, under bench, on wall above bench, and in corner beside bench, lots of hand tools, parts, belts, gloves, chainsaw grinder, sockets 329 Shelf with contents 28" x 76" x 75" tall steel shelf, lots of truck parts, straps, binders, fuel jugs, hoses, air impact 330 New Feed Roll 2 1/2" x 46" 331 Toolbox 23" x 28" x 34" tall 332 Bench with Contents Lots of parts, includes all contents of both shelves, includes all hydraulic hoses hanging beside bench, bearings, sprockets, chain, truck and loader parts, electric motor, cylinders 333 3/4" Carriage Cable Length unknown 334 3/8" Carriage Cable Length unknown 335 Bolt Bin Organizer 12" x 35" x 42" tall, includes all contents 336 Waders (2) pairs of waders, 1 duck decoy 337 Shop Press 22 ton bottle jack 338 Ridgid Pipe Threader Includes bag of parts, clamps, stand 339 Werner 4' Step Ladder 225 lbs. capacity 340 Barrel of End Sealer Partial barrel of Anchor seal 2, hand pump 341 New Banding 6 full rolls of 3/4" poly banding 342 Fluids Bar and chain oil, assorted engine oil 343 Cabinet with Parts 18" x 3' x 6' tall, includes all contents, filters, fluids, hardware, truck parts 344 Floor Fan and Sprayers 24" fan, 3 sprayers 345 Bar and Chain Oil (5) 1 gallon jugs 346 Misc. Lot 5 partial rolls of 16" clear poly, 7 qt. Mason jars

Listing Information

Join us for this absolute liquidation auction as we conduct the Vanleer Hardwoods Inc auction on August 23, 2024, starting at 9 AM Central Time. This onsite and online virtual auction, located at 4400 Highway 49 W, Vanleer, TN 37181, specializes in sawmill and rolling stock equipment. Highlighted items include a Cleereman Mill, Late Model John Deere Skidder, Cat High Track Dozier, John Deere Knuckleboom, and several rubber tire loaders. Preview dates are available on August 22, 2024, from 9 AM to 4 PM or by appointment through Zach Kittrell at 931-224-0699. Don’t miss this opportunity to acquire quality equipment as Vanleer Hardwoods Inc is liquidating its current equipment to build a new mill in the spring! This is an absolute auction with no minimums and no reserves—the highest bidder will be the new owner!

Information Lot
Type of Auction: Sawmill and Rolling Stock.
Highlight Pieces: Cleereman Mill, Late Model John Deere Skidder, Cat High Track Dozier, John Deere Knuckleboom, and several rubber tire loaders.
Auction Specialist: Zach Kittrell 931-224-0699.

Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with.

Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Aug 22, 2024 from 9am-4pm or by appointment. Zach 931-224-0699

Location of Auction: 4400 Highway 49 W, Vanleer, TN 37181

Loadout Information
Equipment removal within 30 days. Load out for smalls will be available by a Bright Star Staff member, Friday, August 23rd until 6 pm and Saturday August 24th 8am-4pm. Please make arrangements during this time frame to pick up all palletized items.

Rigging Information
RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING.

Recommended Rigger: Paul Avery 270.543.1919

Payment Information
Payment terms: 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction.

CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s

Heavy Equipment Key Set 36 Keys
Shipping available for $20

SDRTOP Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

Stihl MS 271 Chainsaw
20" bar, includes 1 extra 20" bar with chain, and (1) 25" bar

Makita Electric Chainsaws
Both Models: UC4051A, both have 16" bars, 110V plug-in, includes 1 extra 16" bar with chain and (1) 20" bar

Jockey Grinder
Model: 06H, mounted on electric Milwaukee drill

95A

Jockey Grinder
Mounted on electric Milwaukee Drill

95B

Jockey Grinder
Model: 97E, mounted on Milwaukee electric drill

95C

Saw Grinder
Mounted on electric Milwaukee drill

Fromm Seal-less Strapping Tool
Model: A-335, SN: 0137707

96A

Fromm Seal-less Strapping Tool
Model: A335, SN: 0138642

96B

Fromm Seal-less Strapping Tool
SN: 0138993.
Model: A335.

Lumber Grading Tools
(2) grader sticks, (1) crayon holder

Lumber Grading Tools
(1) grader stick, (1) crayon holder

100

HMC V206HST Rosserhead Debarker
SN: 1606-95, 14" x 36" x 24" hydraulic tank, electric motor with gearbox and hydraulic pumps under cab, 4' x 4' x 75" tall cab with AC unit and all controls, 2 7/8" shafts, 3" x 24" bull wheels, air cylinders on log kickers, 7' x 33' overall, 30 hp electric motor on head, slant track, includes barn sweep-42" x 27" flat section, 30' incline section with electric drive and 15" paddles

101

3 Strand Log Deck with Stop'n'Load
Hydraulic drive with Tulsa Gearbox, hydraulic cylinder on loading arm, H78 chain, includes support steel to ground, 10'6" x 18'6" x 7' tall

102

Morbark Log Trough
12" ladderback chain, hydraulic drive, hydraulic cylinders on kickers, 52" x 41' long

103

5hp Hydraulic Pack
24" x 36" x 12" tank, includes all hydraulic hoses to equipment

104

2005 Cleereman 36 3HB Carriage
(1st of an entirety) Model: 36, SN: 36-886-05, Silvatech computerized setworks, includes all controls, monitors, and electric panels in operator's cab, 4 axle, 78" x 16', pantograph, air dogs, 3/4" dogs, includes laser mounted to rafters, HB spacing- 1st to 2nd-78", 2nd to 3rd-54"

105

Carriage Track and Frame
(Part of an entirety) 55' of track, 64' long overall, includes frame to ground, does not include carriage feed or pulley, mounted to track, track is 50" center to center

106

Cleereman Carriage Drive and Feed
(Part of an entirety) Model: HYD-50, SN: 182-05, 50 hp electric motor, 30" x 46" x 22" tank, cooling unit, main pump drive, idler pulley, and spool of 3/4" carriage cable mounted in track, includes all hydraulic hoses to equipment, includes new extra sprocket for cable reel

107

Cleereman 60" Husk with Top Saw
(Part of an entirety) 56" F8 style saw, 30" F8 style top saw, 30 hp electric motor on top saw, main electric drive mandel, not included, 22" x 5' off-bear belt with electric drive, 9' x 12' overall, included support steel under cab and edger, includes skid pan to barn sweep

108

Westinghouse Electric Motor
(Part of an entirety) 150 hp, 1780 rpm, 460V, 445T frame

109

WEG SSW-07 Soft Start
(Part of an entirety) 150 hp, SN: MC20737, 480V, 200 amp, includes 1' of conduit on both sides of box

110

Mellott 48" Chain Type Log Turner and Nose Skids
(Part of an entirety) Hydraulic drive and cylinder, includes control valve under cab, 4' x 10'6" nose skid section

111

Vertical Edger
(Part of an entirety) (2) 20" F8 style blades-both moveable, 6 1/2" x 30" capacity, 40 hp electric motor, hydraulic cylinders for blade movement, 8" x 10" x 18" hydraulic tank, laser lights

112

Cleereman 30hp Hydraulic Pack
(Part of an entirety) Model: 30H34GY40FC, SN: 186-05, 30 hp electric motor, cooling unit, 18" x 48" x 27" tank, spill tray, valve station, pumps, includes all hydraulic hoses to equipment

113

Cleerman Operator's Cab
(Part of an entirety) 54" x 6' x 80" tall, does not include any controls or support steel, has AC unit, includes catwalk steps to cab

114

2005 Cleereman 36 3HB Carriage Entirety of Lots 104-113
With 10% raise.

115

3 Strand Log Deck with Stop'n'Load
Hydraulic drive with Tulsa Gearbox, 10'6" x 23'6" x 64" tall, H78 chain, hydraulic cylinder on loading arm, includes support steel to ground, does not include nose skids

116

Belt Conveyor
Electric drive, 20 1/2" belt, 32" x 37' x 56" tall

117

56" Circle Saw
F8 style, good condition

118

56" Circle Saw
F8 style, good condition

119

56" Circle Saw
F8 style, good condition

120

56" Circle Saw
F8 style, good condition

121

56" Circle Saw
F8 style, good condition

122

56" Circle Saw
F8 style, good condition

123

3 Strand Green Chain
Electric drive with Tulsa gearbox, C55B rooftop chain, 10' x 39' x 4' tall, 5' x 10' unloading nose skids on end

124

Vertical Edger Blades
3 pieces; (2) 20", 4" arbor, F8 style; (1) 20", F8 style, needs new arbor

125

Morbark Chip-Pac
(1st of an entirety) 48"-3 knife chipper with 15" knives, new clamps, knife holders, and counter knife on 12/15/2023, includes (9) sharpened knives, 5' x 6' shaker screen with 1 1/2" holes, 2' x 4' cyclone, electric drive on shaker, does not include main electric drive for chipper

126

WEG Electric Motor
(Part of an entirety) 75 hp, 364/5T frame, 460V, 1775 rpm

127

Motor Starters
(Part of an entirety) WEG SSW-06 Soft Start (SN: 1013525119, 75 hp), starter panel for shaker, blower, etc.

128

Morbark 24" Chip Blower
(Part of an entirety) Electric drive, top feed, 12" x 9'6" chip chute

129

Morbark Chip-Pac Entirety of Lots 125-128
With 10% raise.

129A

Mellott Vibrating Conveyor
Electric drive, 19" pan, 4" sides, includes chipper infeed section, 26" x 38' long

130

Rollers
4 1/2" x 45", 26 pieces

131

Ingersoll-Rand Air Compressor
Meter reads: 36,962 hours, Model: SSR-UP6-25-150, SN: PX8649U07103, 460V, 3 ph, 150 max psig, 120 gallon horizontal tank, made in 2007, includes electric panels on wall as marked, includes 120 gallon holding tank under debarker, includes all air line to equipment

132

Barn Sweep
Electric drive, 14" paddles, includes all pan covers in building, 156' of chain throughout building-no pan, runs from husk to chipper

133

Barn Sweep
Electric drive, 14" paddles, no pan, 32' long or 64' of chain located under carriage track

134

Barn Sweep
Electric drive, 14" paddles, 18' flat section-no pan-under husk to side of building, 4' x 30' incline section

135

Electrical Panels
Includes all panels in room behind mill not lotted otherwise, does not include any conduit, (2) 400 amp disconnects, transformer, (2) power capacitators, disconnects, and starters, includes 1' of infeed and outfeed wire on all boxes

136

Electrical Panels
Includes all panels on back wall of mill building as marked, 1' of infeed and outfeed wire included to each panel, no more conduit included, (5) 200 amp disconnects, (2) Nema size 4 starters, (1) Nema size 3, lots of smaller starters

137

Conduit
Includes all conduit from lots 135 and 136 to equipment, 1' of wire to be left on all panels and motors, includes junction conduit boxes, does not include any electrical panels or 110V conduit

138

110V Electrical
Includes 110V breaker panel, includes all 110V conduit, wiring, and lighting in mill building

150

HMC Barn Sweep Pan
Model: WC3, SN: 669-80, no chain or drive, 15" max paddle size

151

Concrete Slab
45" x 22' x 12" thick, 38" x 30' long

152

Stacking Sticks
43" x 7' x 45" tall rack, 3/4" x 1 1/4" x 48" sticks, 1/2 poly sticks, 1/2 mixed species, approx. 2300 pieces total

153

Stacking Sticks
3/4" x 1 1/4" x 48" poly sticks, approx. 1350 pieces

154

Stacking Sticks
3/4" x 1 1/4" x 48" poly sticks, approx. 1350 pieces

155

Catwalk Section
2' x 6' top platform, 2' x 9'6" x 2' tall overall

156

Pusher Attachment for Loader
36" x 68" push plate, 19' long, 4 1/2" x 9 1/2" x 5' long fork pockets

157

Log Rack
97" x 102" x 122" tall overall, 82" x 90" x 62" high storage on top

158

Log Rack
97" x 102" x 122" tall overall, 82" x 90" x 62" high storage on top

159

Slab Rack
52" x 7' x 42" tall.

160

Slab Rack
45" x 6' x 30" tall

161

Tie-Stacking Rack
6' x 7' x 44" tall

162

Tie-Stacking Rack
7' x 90" x 44" tall

163

Jib Crane
8" max fork width, 6" tube steel-13' long

200

2017 Komatsu WA 270-7 Wheel Loader
Year: Approx. 2014 (unsure on the exact year).
SN: 81293 (PIN: KMTWA122LEA081293).
Meter reads: 8,746 hours.
Engine: Komatsu SAA6D (SN: 26634151).
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 19".
Tire Size: 20.5R25.
Attachments: None included.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Starts, runs, and operates. Has backup cam

201

2017 Cat 930K Wheel Loader
SN: CAT0930KPRHN02786.
Meter reads: 13,177 hours.
Engine: Cat C7.1 (SN: C8N15976).
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 25".
Tire Size: 20.5R25.
Attachments: None incuded.
Heater: Yes.
A/C: Yes.
Quick Attach: Yes.

Features and Notes: Starts, runs, and operates.

202

Cat 928G Wheel Loader
SN: CAT0928GCDJD02387.
Meter reads: 17,283 hours.
Engine: Perkins Turbo.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 26".
Tire Size: 20.5R25.
Attachments: 7x60" pin-through forks-78" wide.
Heater: Yes.
A/C: No.
Quick Attach: No.

Features and Notes: Starts, runs, and operates.

203

CAT 930 Wheel Loader
SN: 41K12487.
Meter reads: Meter is broken.
Engine: Cat 3304 (SN: 78P42038).
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 22".
Tire Size: 17.5R25.
Attachments: 7x48" pin through forks-54" wide.
Heater: No.
A/C: No.
Quick Attach: No.

Features and Notes: Starts, runs, and operates. Has a new tire!

204

Cat Loader Forks
Quick attach, 6" x 55" forks, 64" wide, 74" high, mounted on lot # 201

205

Rockland Loader Forks
Model: LF, SN: 65860, Quick attach, 7" x 55" forks, 70" wide, 45" high, mounted on lot # 200

206

Cat Loader Bucket
SN: 140701926, quick attach, 3.0 cubic yard capacity, 45" x 100" x 4' tall

207

JRB Loader Bucket
SN: J0001010691, 42" x 105" x 45" tall, quick attach, 3 cubic yard capacity

209

Sawdust Bucket
Slip-on fork pockets, 50" x 8' x 45" tall, built of 3/8" plate steel

210

Loader Bucket
36" x 94" x 45" tall, pin through style

214

2017 John Deere 648 L Dual Arch Grapple Skidder
SN: 1DW648LXCHF680748.
Engine: John Deere 6068.
Meter reads: 9,272 hours.
Rebuilt engine: No.
Tire size: 35.5L32. Tire chains: No.
Blade size: 9'8".
Grapple: Yes.
Cable winch: Yes.
ROPS: Enclosed.
Heat: Yes. AC: Yes.
Type of controls: Joystick with swivel seat.

Features and Notes: John Deere Winch (SN: T04000X004515), with 1" cable. Starts, runs, and operates good.

215

2003 Cat D6N XL Dozer
Meter reads: 7,764 hours.
Engine: Cat 3126.
Fuel type: Diesel.
HP: 260.
Blade: 10'6"-6 way.
ROPS: Open.
A/C: No.
Heater: No.

Features and Notes: 22" tracks, high-track. Starts, runs, and operates well.

216

2014 John Deere 437D Knuckleboom
SN: 1T0437DDTFC286269.
Meter reads: 12,267 hours.
Engine: John Deere 6068 (SN: PE6068H975542).
Fuel type: Diesel.
Continuous Grapple: Yes, Rotobec 4552 HD (SN: 114204-1-1).
Trailer: Big John Trailer with hydraulic landing gear.
Delimber: Yes, 39" bar.
Bucksaw Hookups: Yes.
A/C: Yes.
Heater: Yes.

Features and Notes: 11R22.5 tires, fully enclosed cab with tint, radio, and pilot joystick controls. Starts, runs, and operates.

217

CSI DL-4400 Classic Bucksaw
Direct drive, 48" bar, 75" x 19'6" log rack

221

2000 Freightliner Century Class 120 Truck
VIN #: 1FUYSSEB7YLG35192.
Mileage: 1,128,125.
Engine Type: Detroit Series 60.
Fuel Type: Diesel.
Horsepower: 430.
Transmission: 10 speed Eaton Fuller.
GVWR: 52,000 lbs.
Front axle rating: 12,000 lbs.
Rear axle rating: 20,000 lbs.
Heat: Yes.
Wet kit: No.

Features and Notes: 11R22.5 tires. Starts and runs.

225

Log Trailer
11R24.5 tires, 4 bunk, 86" wide x 6' tall bunks, 38' long, bunk spacing: front to back 9'-15'-9'

230

1984 Fruehauf Chip Trailer
VIN: 1H2V04521EE001571, GVWR: 68,000 lbs., 45' long, 11R22.5 tires, 98" inside width, 108" inside height, half door in rear

231

Open Top Chip Trailer
GVWR: Approx. 65000 lbs., 92" inside width, 88" inside height, 40' long, 11R22.5 tires, tarp top, 92" inside width, 104" inside height, tarp top

232

Open Top Chip Trailer
GVWR: Approx. 65000 lbs., 11R22.5 tires, 40' long, 92" inside width, 104" inside height, tarp top

233

Chip Trailer
GVWR: Approx. 65000 lbs., 11R22.5 tires, 40' long, 92" inside width, 94" inside height

241

Shop-Built Trailer Dolly
10.0-20 tires, 2 axle, 5th wheel hitch, pin-through hitch, was pulled behind loaders

242

Shop-Built Trailer Dolly
10.0-20 tires, single axle, 5th wheel hitch, pin-through hitch, was pulled behind loaders

250

Chipper Knife Grinder
Electric drive, holds (2) 15" knives, 3' x 6', does not include chipper knives

251

Cutting Torch Set
Includes cart, gauges, leads, torch, tanks

252

Miller Bobcat 225G AC/DC Welder/8000 Watt Generator
SN: KF909317, 120/240V output, wire and stick welder, meter reads: 574 hours, Onan Performer 16 gas engine, includes leads, mounted on cart with wheels

253

Cabinet with Parts
18" x 3' x 6' tall, includes all contents, hand tools, chain parts, saw bits and shanks

254

Air Compressor
15 hp electric motor, 24" x 64" horizontal air tank, includes Van Air single tower air dryer and heat exchange unit, includes all air line hose from compressor to equipment

255

Table with Parts
12" x 50" x 32" tall wooden table, 2 hydraulic motors, gear chain, 6 brand new bearings

256

Rolling Tool Chest
28" x 30" x 42" tall, includes all contents, wrenches, hand tools, misc. hardware and parts

257

Knife Grinder
Electric drive with 110V plug-in, 36" long clamping bench, 20" x 4' x 56" tall overall

258

Werner 8' Step Ladder
300 lbs. capacity

259

Extension Ladder
16' max, includes step stool

260

Fluids
Compressor fluid, gear oil, grease tubes, assorted oils

261

Craftsman Power Washer
110V plug-in, 1900 psi, 102 gpm, includes 25' hose and wand

262

Floor Fan
30", on stand, 110V plug-in

263

Floor Fan
30", on stand, 110V plug-in

264

Box Fans
(2) 18" fans, 110V plug-in

265

Floor Fan
24", 110V plug-in

266

Banding Cart
Partial roll of 3/4" banding, snips

267

Banding Cart
Partial roll of 3/4" steel banding, needs new wheels

268

Banding Cart
Partial roll of 3/4" steel banding

269

Banding Cart
Partial roll of 3/4" steel banding, needs new wheels

270

Garden Hoses
3 pieces, lengths unknown

271

Carriage Cable
Partial roll of 3/4" coated steel cable

272

Wire Spool with Parts
36" x 27" tall spool, includes al parts on spool, hand tools, new bearing and pulley, air hose, partial spool of wire, sprocket, chain, 5 gallon cooler

273

Steel
Angle iron, shaft-stock, threaded rod, pipe

274

Hand Tools
Shovels, brooms, pry bar, 48" cant hook

275

Hand Tools
Shovels, brooms, fork, pry bar, 24" cant hook

276

Hand Tools
Shovels, brooms, pry bar, forks, scraper, sledge hammer

277

Barn Sweep Paddles
16-18" long, 15 pieces

278

Extension Cords and Air Hose
2 cords, (1) 3/8" air hose, lengths unknown

279

Parts
Misc. belts, misc. hydraulic hoses, (2) 21" conveyor belts-lengths unknown

280

Lights and Heater
(2) LED lights-110V plug-ins, 15 lbs. propane tank with heater

281

Catwalk Section
39" x 6' x 57" tall

282

Rebuilt Tulsa Winch Gear Box

283

Edger Blade
14", sharpened, 4" arbor

284

Trim Saw Blades
(3) 18", sharpened, 1 1/2" arbor

285

Lumber Grading Tools
1 grading stick, 2 crayon holders

286

New Gearbox
Brand new, never installed, made by Winsmith, 30:1 ratio, Size: E35, Model: XDNS

287

Parts
Electrical parts, misc. sprinkler parts

288

Cabinet of Parts
18" x 3' x 6' tall, includes all contents, belt lacing, manuals, filters

289

Cabinet of Parts
18" x 3' x 6', includes all contents, welding rods and helmet bearings, sprockets, cylinders, clamps, filters

290

New Mandrel Shaft
2 3/16" x 44"

291

New Shafts
(2) 1 7/8" x 26 1/2", (1) 2 3/16" x 26 1/2"

292

First Aid Kit

293

Office Furniture
Bench, folding table, office chair, 2 folding chairs, 2 desks, DeWalt 18V drill with battery and case

294

Office Appliances
3 space heaters, 2 microwaves, 1 window AC unit

295

Antique Vending Machine

296

Kelvinator Refrigerator
Electric

297

New Fluorescent Light Bulbs

300

Trailer Straps
(4) 4" straps

301

2" Fire Hose
6 hoses

302

3" Fire Hose
3 hoses

303

3" Fire Hose
3 hoses

304

3" Fire Hose
3 hoses

305

3" Fire Hose
3 hoses, 1 needs end repaired

306

Banding
New roll of 1" poly banding

307

Hand Tools
Shovel, forks, sledge hammer, pry bar

308

Hand Tools
Shovel, rake, cant hook, crow bar, cheater bar, 3' long 1" drive ratchet

309

Hand Tools
Cant hook, sledge, pry bar, bolt cutters

310

Pipe Benders
(1) 1", (1) 3/4"

311

Makita RBC 251 Weed Eater

312

Master Space Heater
140,000 BTU

313

Space Heaters
(1) Heat Fast 75000 BTU, (1) Master 80000 BTU

314

Excel Power Washer
2500 psi, 2.2 gpm, 5.5 hp Honda gas motor

315

1" Pex
Length unknown

316

Electrical Parts
Wire, fuses, breakers

317

Chipper Parts
Knife holders, counter knives

318

Conveyor Belts
(1) 36", (4) 22", (1) 18", lengths unknown

319

Parts
Tarp, extension cord, air hose, pvc fittings, sprockets, hydraulic hoses

325

Pipe Wrenches
All Ridgid, (1) 12", (1) 14", (1) aluminum 14", (1) 18", (1) 24"

326

Makita Electric Chainsaw
16" bar, 110 plug-in, 3 extra bars

327

3 1/2" Bench Vise

328

Bench with Contents
42" x 98" x 3' tall, includes all contents on bench, under bench, on wall above bench, and in corner beside bench, lots of hand tools, parts, belts, gloves, chainsaw grinder, sockets

329

Shelf with contents
28" x 76" x 75" tall steel shelf, lots of truck parts, straps, binders, fuel jugs, hoses, air impact

330

New Feed Roll
2 1/2" x 46"

331

Toolbox
23" x 28" x 34" tall

332

Bench with Contents
Lots of parts, includes all contents of both shelves, includes all hydraulic hoses hanging beside bench, bearings, sprockets, chain, truck and loader parts, electric motor, cylinders

333

3/4" Carriage Cable
Length unknown

334

3/8" Carriage Cable
Length unknown

335

Bolt Bin Organizer
12" x 35" x 42" tall, includes all contents

336

Waders
(2) pairs of waders, 1 duck decoy

337

Shop Press
22 ton bottle jack

338

Ridgid Pipe Threader
Includes bag of parts, clamps, stand

339

Werner 4' Step Ladder
225 lbs. capacity

340

Barrel of End Sealer
Partial barrel of Anchor seal 2, hand pump

341

New Banding
6 full rolls of 3/4" poly banding

342

Fluids
Bar and chain oil, assorted engine oil

343

Cabinet with Parts
18" x 3' x 6' tall, includes all contents, filters, fluids, hardware, truck parts

344

Floor Fan and Sprayers
24" fan, 3 sprayers

345

Bar and Chain Oil
(5) 1 gallon jugs

346

Misc. Lot
5 partial rolls of 16" clear poly, 7 qt. Mason jars

Photo Gallery

Share This Listing

Other Sales by
This Company

Jan 1
Des Arc, AR

Oct 1
Middlebury, IN

Vanleer Hardwoods Inc - Liquidation Auction - Vanleer, TN

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704

4400 Highway 49 W
Vanleer, TN 37181

Friday Aug 23, 2024 Completed

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Listing Details
Join us for this absolute liquidation auction as we conduct the Vanleer Hardwoods Inc auction on August 23, 2024, starting at 9 AM Central Time. This onsite and online virtual auction, located at 4400 Highway 49 W, Vanleer, TN 37181, specializes in sawmill and rolling stock equipment. Highlighted items include a Cleereman Mill, Late Model John Deere Skidder, Cat High Track Dozier, John Deere Knuckleboom, and several rubber tire loaders. Preview dates are available on August 22, 2024, from 9 AM to 4 PM or by appointment through Zach Kittrell at 931-224-0699. Don’t miss this opportunity to acquire quality equipment as Vanleer Hardwoods Inc is liquidating its current equipment to build a new mill in the spring! This is an absolute auction with no minimums and no reserves—the highest bidder will be the new owner! 00 Information Lot Type of Auction: Sawmill and Rolling Stock. Highlight Pieces: Cleereman Mill, Late Model John Deere Skidder, Cat High Track Dozier, John Deere Knuckleboom, and several rubber tire loaders. Auction Specialist: Zach Kittrell 931-224-0699. Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with. 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Aug 22, 2024 from 9am-4pm or by appointment. Zach 931-224-0699 Location of Auction: 4400 Highway 49 W, Vanleer, TN 37181 02 Loadout Information Equipment removal within 30 days. Load out for smalls will be available by a Bright Star Staff member, Friday, August 23rd until 6 pm and Saturday August 24th 8am-4pm. Please make arrangements during this time frame to pick up all palletized items. 03 Rigging Information RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. Recommended Rigger: Paul Avery 270.543.1919 04 Payment Information Payment terms: 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 80 CAT 972M Wheel Loader 1:50 Scale Replica- Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 81 Heavy Equipment Key Set 36 Keys Shipping available for $20 82 SDRTOP Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 93 Stihl MS 271 Chainsaw 20" bar, includes 1 extra 20" bar with chain, and (1) 25" bar 94 Makita Electric Chainsaws Both Models: UC4051A, both have 16" bars, 110V plug-in, includes 1 extra 16" bar with chain and (1) 20" bar 95 Jockey Grinder Model: 06H, mounted on electric Milwaukee drill 95A Jockey Grinder Mounted on electric Milwaukee Drill 95B Jockey Grinder Model: 97E, mounted on Milwaukee electric drill 95C Saw Grinder Mounted on electric Milwaukee drill 96 Fromm Seal-less Strapping Tool Model: A-335, SN: 0137707 96A Fromm Seal-less Strapping Tool Model: A335, SN: 0138642 96B Fromm Seal-less Strapping Tool SN: 0138993. Model: A335. 97 Lumber Grading Tools (2) grader sticks, (1) crayon holder 98 Lumber Grading Tools (1) grader stick, (1) crayon holder 99 Lumber Grading Tools (1) grader stick, (1) crayon holder 100 HMC V206HST Rosserhead Debarker SN: 1606-95, 14" x 36" x 24" hydraulic tank, electric motor with gearbox and hydraulic pumps under cab, 4' x 4' x 75" tall cab with AC unit and all controls, 2 7/8" shafts, 3" x 24" bull wheels, air cylinders on log kickers, 7' x 33' overall, 30 hp electric motor on head, slant track, includes barn sweep-42" x 27" flat section, 30' incline section with electric drive and 15" paddles 101 3 Strand Log Deck with Stop'n'Load Hydraulic drive with Tulsa Gearbox, hydraulic cylinder on loading arm, H78 chain, includes support steel to ground, 10'6" x 18'6" x 7' tall 102 Morbark Log Trough 12" ladderback chain, hydraulic drive, hydraulic cylinders on kickers, 52" x 41' long 103 5hp Hydraulic Pack 24" x 36" x 12" tank, includes all hydraulic hoses to equipment 104 2005 Cleereman 36 3HB Carriage (1st of an entirety) Model: 36, SN: 36-886-05, Silvatech computerized setworks, includes all controls, monitors, and electric panels in operator's cab, 4 axle, 78" x 16', pantograph, air dogs, 3/4" dogs, includes laser mounted to rafters, HB spacing- 1st to 2nd-78", 2nd to 3rd-54" 105 Carriage Track and Frame (Part of an entirety) 55' of track, 64' long overall, includes frame to ground, does not include carriage feed or pulley, mounted to track, track is 50" center to center 106 Cleereman Carriage Drive and Feed (Part of an entirety) Model: HYD-50, SN: 182-05, 50 hp electric motor, 30" x 46" x 22" tank, cooling unit, main pump drive, idler pulley, and spool of 3/4" carriage cable mounted in track, includes all hydraulic hoses to equipment, includes new extra sprocket for cable reel 107 Cleereman 60" Husk with Top Saw (Part of an entirety) 56" F8 style saw, 30" F8 style top saw, 30 hp electric motor on top saw, main electric drive mandel, not included, 22" x 5' off-bear belt with electric drive, 9' x 12' overall, included support steel under cab and edger, includes skid pan to barn sweep 108 Westinghouse Electric Motor (Part of an entirety) 150 hp, 1780 rpm, 460V, 445T frame 109 WEG SSW-07 Soft Start (Part of an entirety) 150 hp, SN: MC20737, 480V, 200 amp, includes 1' of conduit on both sides of box 110 Mellott 48" Chain Type Log Turner and Nose Skids (Part of an entirety) Hydraulic drive and cylinder, includes control valve under cab, 4' x 10'6" nose skid section 111 Vertical Edger (Part of an entirety) (2) 20" F8 style blades-both moveable, 6 1/2" x 30" capacity, 40 hp electric motor, hydraulic cylinders for blade movement, 8" x 10" x 18" hydraulic tank, laser lights 112 Cleereman 30hp Hydraulic Pack (Part of an entirety) Model: 30H34GY40FC, SN: 186-05, 30 hp electric motor, cooling unit, 18" x 48" x 27" tank, spill tray, valve station, pumps, includes all hydraulic hoses to equipment 113 Cleerman Operator's Cab (Part of an entirety) 54" x 6' x 80" tall, does not include any controls or support steel, has AC unit, includes catwalk steps to cab 114 2005 Cleereman 36 3HB Carriage Entirety of Lots 104-113 With 10% raise. 115 3 Strand Log Deck with Stop'n'Load Hydraulic drive with Tulsa Gearbox, 10'6" x 23'6" x 64" tall, H78 chain, hydraulic cylinder on loading arm, includes support steel to ground, does not include nose skids 116 Belt Conveyor Electric drive, 20 1/2" belt, 32" x 37' x 56" tall 117 56" Circle Saw F8 style, good condition 118 56" Circle Saw F8 style, good condition 119 56" Circle Saw F8 style, good condition 120 56" Circle Saw F8 style, good condition 121 56" Circle Saw F8 style, good condition 122 56" Circle Saw F8 style, good condition 123 3 Strand Green Chain Electric drive with Tulsa gearbox, C55B rooftop chain, 10' x 39' x 4' tall, 5' x 10' unloading nose skids on end 124 Vertical Edger Blades 3 pieces; (2) 20", 4" arbor, F8 style; (1) 20", F8 style, needs new arbor 125 Morbark Chip-Pac (1st of an entirety) 48"-3 knife chipper with 15" knives, new clamps, knife holders, and counter knife on 12/15/2023, includes (9) sharpened knives, 5' x 6' shaker screen with 1 1/2" holes, 2' x 4' cyclone, electric drive on shaker, does not include main electric drive for chipper 126 WEG Electric Motor (Part of an entirety) 75 hp, 364/5T frame, 460V, 1775 rpm 127 Motor Starters (Part of an entirety) WEG SSW-06 Soft Start (SN: 1013525119, 75 hp), starter panel for shaker, blower, etc. 128 Morbark 24" Chip Blower (Part of an entirety) Electric drive, top feed, 12" x 9'6" chip chute 129 Morbark Chip-Pac Entirety of Lots 125-128 With 10% raise. 129A Mellott Vibrating Conveyor Electric drive, 19" pan, 4" sides, includes chipper infeed section, 26" x 38' long 130 Rollers 4 1/2" x 45", 26 pieces 131 Ingersoll-Rand Air Compressor Meter reads: 36,962 hours, Model: SSR-UP6-25-150, SN: PX8649U07103, 460V, 3 ph, 150 max psig, 120 gallon horizontal tank, made in 2007, includes electric panels on wall as marked, includes 120 gallon holding tank under debarker, includes all air line to equipment 132 Barn Sweep Electric drive, 14" paddles, includes all pan covers in building, 156' of chain throughout building-no pan, runs from husk to chipper 133 Barn Sweep Electric drive, 14" paddles, no pan, 32' long or 64' of chain located under carriage track 134 Barn Sweep Electric drive, 14" paddles, 18' flat section-no pan-under husk to side of building, 4' x 30' incline section 135 Electrical Panels Includes all panels in room behind mill not lotted otherwise, does not include any conduit, (2) 400 amp disconnects, transformer, (2) power capacitators, disconnects, and starters, includes 1' of infeed and outfeed wire on all boxes 136 Electrical Panels Includes all panels on back wall of mill building as marked, 1' of infeed and outfeed wire included to each panel, no more conduit included, (5) 200 amp disconnects, (2) Nema size 4 starters, (1) Nema size 3, lots of smaller starters 137 Conduit Includes all conduit from lots 135 and 136 to equipment, 1' of wire to be left on all panels and motors, includes junction conduit boxes, does not include any electrical panels or 110V conduit 138 110V Electrical Includes 110V breaker panel, includes all 110V conduit, wiring, and lighting in mill building 150 HMC Barn Sweep Pan Model: WC3, SN: 669-80, no chain or drive, 15" max paddle size 151 Concrete Slab 45" x 22' x 12" thick, 38" x 30' long 152 Stacking Sticks 43" x 7' x 45" tall rack, 3/4" x 1 1/4" x 48" sticks, 1/2 poly sticks, 1/2 mixed species, approx. 2300 pieces total 153 Stacking Sticks 3/4" x 1 1/4" x 48" poly sticks, approx. 1350 pieces 154 Stacking Sticks 3/4" x 1 1/4" x 48" poly sticks, approx. 1350 pieces 155 Catwalk Section 2' x 6' top platform, 2' x 9'6" x 2' tall overall 156 Pusher Attachment for Loader 36" x 68" push plate, 19' long, 4 1/2" x 9 1/2" x 5' long fork pockets 157 Log Rack 97" x 102" x 122" tall overall, 82" x 90" x 62" high storage on top 158 Log Rack 97" x 102" x 122" tall overall, 82" x 90" x 62" high storage on top 159 Slab Rack 52" x 7' x 42" tall. 160 Slab Rack 45" x 6' x 30" tall 161 Tie-Stacking Rack 6' x 7' x 44" tall 162 Tie-Stacking Rack 7' x 90" x 44" tall 163 Jib Crane 8" max fork width, 6" tube steel-13' long 200 2017 Komatsu WA 270-7 Wheel Loader Year: Approx. 2014 (unsure on the exact year). SN: 81293 (PIN: KMTWA122LEA081293). Meter reads: 8,746 hours. Engine: Komatsu SAA6D (SN: 26634151). Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Center to center of pins: 19". Tire Size: 20.5R25. Attachments: None included. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Starts, runs, and operates. Has backup cam 201 2017 Cat 930K Wheel Loader SN: CAT0930KPRHN02786. Meter reads: 13,177 hours. Engine: Cat C7.1 (SN: C8N15976). Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Center to center of pins: 25". Tire Size: 20.5R25. Attachments: None incuded. Heater: Yes. A/C: Yes. Quick Attach: Yes. Features and Notes: Starts, runs, and operates. 202 Cat 928G Wheel Loader SN: CAT0928GCDJD02387. Meter reads: 17,283 hours. Engine: Perkins Turbo. Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Center to center of pins: 26". Tire Size: 20.5R25. Attachments: 7x60" pin-through forks-78" wide. Heater: Yes. A/C: No. Quick Attach: No. Features and Notes: Starts, runs, and operates. 203 CAT 930 Wheel Loader SN: 41K12487. Meter reads: Meter is broken. Engine: Cat 3304 (SN: 78P42038). Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Center to center of pins: 22". Tire Size: 17.5R25. Attachments: 7x48" pin through forks-54" wide. Heater: No. A/C: No. Quick Attach: No. Features and Notes: Starts, runs, and operates. Has a new tire! 204 Cat Loader Forks Quick attach, 6" x 55" forks, 64" wide, 74" high, mounted on lot # 201 205 Rockland Loader Forks Model: LF, SN: 65860, Quick attach, 7" x 55" forks, 70" wide, 45" high, mounted on lot # 200 206 Cat Loader Bucket SN: 140701926, quick attach, 3.0 cubic yard capacity, 45" x 100" x 4' tall 207 JRB Loader Bucket SN: J0001010691, 42" x 105" x 45" tall, quick attach, 3 cubic yard capacity 209 Sawdust Bucket Slip-on fork pockets, 50" x 8' x 45" tall, built of 3/8" plate steel 210 Loader Bucket 36" x 94" x 45" tall, pin through style 214 2017 John Deere 648 L Dual Arch Grapple Skidder SN: 1DW648LXCHF680748. Engine: John Deere 6068. Meter reads: 9,272 hours. Rebuilt engine: No. Tire size: 35.5L32. Tire chains: No. Blade size: 9'8". Grapple: Yes. Cable winch: Yes. ROPS: Enclosed. Heat: Yes. AC: Yes. Type of controls: Joystick with swivel seat. Features and Notes: John Deere Winch (SN: T04000X004515), with 1" cable. Starts, runs, and operates good. 215 2003 Cat D6N XL Dozer Meter reads: 7,764 hours. Engine: Cat 3126. Fuel type: Diesel. HP: 260. Blade: 10'6"-6 way. ROPS: Open. A/C: No. Heater: No. Features and Notes: 22" tracks, high-track. Starts, runs, and operates well. 216 2014 John Deere 437D Knuckleboom SN: 1T0437DDTFC286269. Meter reads: 12,267 hours. Engine: John Deere 6068 (SN: PE6068H975542). Fuel type: Diesel. Continuous Grapple: Yes, Rotobec 4552 HD (SN: 114204-1-1). Trailer: Big John Trailer with hydraulic landing gear. Delimber: Yes, 39" bar. Bucksaw Hookups: Yes. A/C: Yes. Heater: Yes. Features and Notes: 11R22.5 tires, fully enclosed cab with tint, radio, and pilot joystick controls. Starts, runs, and operates. 217 CSI DL-4400 Classic Bucksaw Direct drive, 48" bar, 75" x 19'6" log rack 221 2000 Freightliner Century Class 120 Truck VIN #: 1FUYSSEB7YLG35192. Mileage: 1,128,125. Engine Type: Detroit Series 60. Fuel Type: Diesel. Horsepower: 430. Transmission: 10 speed Eaton Fuller. GVWR: 52,000 lbs. Front axle rating: 12,000 lbs. Rear axle rating: 20,000 lbs. Heat: Yes. Wet kit: No. Features and Notes: 11R22.5 tires. Starts and runs. 225 Log Trailer 11R24.5 tires, 4 bunk, 86" wide x 6' tall bunks, 38' long, bunk spacing: front to back 9'-15'-9' 230 1984 Fruehauf Chip Trailer VIN: 1H2V04521EE001571, GVWR: 68,000 lbs., 45' long, 11R22.5 tires, 98" inside width, 108" inside height, half door in rear 231 Open Top Chip Trailer GVWR: Approx. 65000 lbs., 92" inside width, 88" inside height, 40' long, 11R22.5 tires, tarp top, 92" inside width, 104" inside height, tarp top 232 Open Top Chip Trailer GVWR: Approx. 65000 lbs., 11R22.5 tires, 40' long, 92" inside width, 104" inside height, tarp top 233 Chip Trailer GVWR: Approx. 65000 lbs., 11R22.5 tires, 40' long, 92" inside width, 94" inside height 241 Shop-Built Trailer Dolly 10.0-20 tires, 2 axle, 5th wheel hitch, pin-through hitch, was pulled behind loaders 242 Shop-Built Trailer Dolly 10.0-20 tires, single axle, 5th wheel hitch, pin-through hitch, was pulled behind loaders 250 Chipper Knife Grinder Electric drive, holds (2) 15" knives, 3' x 6', does not include chipper knives 251 Cutting Torch Set Includes cart, gauges, leads, torch, tanks 252 Miller Bobcat 225G AC/DC Welder/8000 Watt Generator SN: KF909317, 120/240V output, wire and stick welder, meter reads: 574 hours, Onan Performer 16 gas engine, includes leads, mounted on cart with wheels 253 Cabinet with Parts 18" x 3' x 6' tall, includes all contents, hand tools, chain parts, saw bits and shanks 254 Air Compressor 15 hp electric motor, 24" x 64" horizontal air tank, includes Van Air single tower air dryer and heat exchange unit, includes all air line hose from compressor to equipment 255 Table with Parts 12" x 50" x 32" tall wooden table, 2 hydraulic motors, gear chain, 6 brand new bearings 256 Rolling Tool Chest 28" x 30" x 42" tall, includes all contents, wrenches, hand tools, misc. hardware and parts 257 Knife Grinder Electric drive with 110V plug-in, 36" long clamping bench, 20" x 4' x 56" tall overall 258 Werner 8' Step Ladder 300 lbs. capacity 259 Extension Ladder 16' max, includes step stool 260 Fluids Compressor fluid, gear oil, grease tubes, assorted oils 261 Craftsman Power Washer 110V plug-in, 1900 psi, 102 gpm, includes 25' hose and wand 262 Floor Fan 30", on stand, 110V plug-in 263 Floor Fan 30", on stand, 110V plug-in 264 Box Fans (2) 18" fans, 110V plug-in 265 Floor Fan 24", 110V plug-in 266 Banding Cart Partial roll of 3/4" banding, snips 267 Banding Cart Partial roll of 3/4" steel banding, needs new wheels 268 Banding Cart Partial roll of 3/4" steel banding 269 Banding Cart Partial roll of 3/4" steel banding, needs new wheels 270 Garden Hoses 3 pieces, lengths unknown 271 Carriage Cable Partial roll of 3/4" coated steel cable 272 Wire Spool with Parts 36" x 27" tall spool, includes al parts on spool, hand tools, new bearing and pulley, air hose, partial spool of wire, sprocket, chain, 5 gallon cooler 273 Steel Angle iron, shaft-stock, threaded rod, pipe 274 Hand Tools Shovels, brooms, pry bar, 48" cant hook 275 Hand Tools Shovels, brooms, fork, pry bar, 24" cant hook 276 Hand Tools Shovels, brooms, pry bar, forks, scraper, sledge hammer 277 Barn Sweep Paddles 16-18" long, 15 pieces 278 Extension Cords and Air Hose 2 cords, (1) 3/8" air hose, lengths unknown 279 Parts Misc. belts, misc. hydraulic hoses, (2) 21" conveyor belts-lengths unknown 280 Lights and Heater (2) LED lights-110V plug-ins, 15 lbs. propane tank with heater 281 Catwalk Section 39" x 6' x 57" tall 282 Rebuilt Tulsa Winch Gear Box 283 Edger Blade 14", sharpened, 4" arbor 284 Trim Saw Blades (3) 18", sharpened, 1 1/2" arbor 285 Lumber Grading Tools 1 grading stick, 2 crayon holders 286 New Gearbox Brand new, never installed, made by Winsmith, 30:1 ratio, Size: E35, Model: XDNS 287 Parts Electrical parts, misc. sprinkler parts 288 Cabinet of Parts 18" x 3' x 6' tall, includes all contents, belt lacing, manuals, filters 289 Cabinet of Parts 18" x 3' x 6', includes all contents, welding rods and helmet bearings, sprockets, cylinders, clamps, filters 290 New Mandrel Shaft 2 3/16" x 44" 291 New Shafts (2) 1 7/8" x 26 1/2", (1) 2 3/16" x 26 1/2" 292 First Aid Kit 293 Office Furniture Bench, folding table, office chair, 2 folding chairs, 2 desks, DeWalt 18V drill with battery and case 294 Office Appliances 3 space heaters, 2 microwaves, 1 window AC unit 295 Antique Vending Machine 296 Kelvinator Refrigerator Electric 297 New Fluorescent Light Bulbs 300 Trailer Straps (4) 4" straps 301 2" Fire Hose 6 hoses 302 3" Fire Hose 3 hoses 303 3" Fire Hose 3 hoses 304 3" Fire Hose 3 hoses 305 3" Fire Hose 3 hoses, 1 needs end repaired 306 Banding New roll of 1" poly banding 307 Hand Tools Shovel, forks, sledge hammer, pry bar 308 Hand Tools Shovel, rake, cant hook, crow bar, cheater bar, 3' long 1" drive ratchet 309 Hand Tools Cant hook, sledge, pry bar, bolt cutters 310 Pipe Benders (1) 1", (1) 3/4" 311 Makita RBC 251 Weed Eater 312 Master Space Heater 140,000 BTU 313 Space Heaters (1) Heat Fast 75000 BTU, (1) Master 80000 BTU 314 Excel Power Washer 2500 psi, 2.2 gpm, 5.5 hp Honda gas motor 315 1" Pex Length unknown 316 Electrical Parts Wire, fuses, breakers 317 Chipper Parts Knife holders, counter knives 318 Conveyor Belts (1) 36", (4) 22", (1) 18", lengths unknown 319 Parts Tarp, extension cord, air hose, pvc fittings, sprockets, hydraulic hoses 325 Pipe Wrenches All Ridgid, (1) 12", (1) 14", (1) aluminum 14", (1) 18", (1) 24" 326 Makita Electric Chainsaw 16" bar, 110 plug-in, 3 extra bars 327 3 1/2" Bench Vise 328 Bench with Contents 42" x 98" x 3' tall, includes all contents on bench, under bench, on wall above bench, and in corner beside bench, lots of hand tools, parts, belts, gloves, chainsaw grinder, sockets 329 Shelf with contents 28" x 76" x 75" tall steel shelf, lots of truck parts, straps, binders, fuel jugs, hoses, air impact 330 New Feed Roll 2 1/2" x 46" 331 Toolbox 23" x 28" x 34" tall 332 Bench with Contents Lots of parts, includes all contents of both shelves, includes all hydraulic hoses hanging beside bench, bearings, sprockets, chain, truck and loader parts, electric motor, cylinders 333 3/4" Carriage Cable Length unknown 334 3/8" Carriage Cable Length unknown 335 Bolt Bin Organizer 12" x 35" x 42" tall, includes all contents 336 Waders (2) pairs of waders, 1 duck decoy 337 Shop Press 22 ton bottle jack 338 Ridgid Pipe Threader Includes bag of parts, clamps, stand 339 Werner 4' Step Ladder 225 lbs. capacity 340 Barrel of End Sealer Partial barrel of Anchor seal 2, hand pump 341 New Banding 6 full rolls of 3/4" poly banding 342 Fluids Bar and chain oil, assorted engine oil 343 Cabinet with Parts 18" x 3' x 6' tall, includes all contents, filters, fluids, hardware, truck parts 344 Floor Fan and Sprayers 24" fan, 3 sprayers 345 Bar and Chain Oil (5) 1 gallon jugs 346 Misc. Lot 5 partial rolls of 16" clear poly, 7 qt. Mason jars

Close X

Gallery Images Loading, Please Wait...

Close X

Save this sale to your Saved Sales list!

Your Saved Sales list is an easy way to return to sale listings which are of interest to you.

Login

Username:

Password:

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Close X

Sign Up

FREE EMAIL NOTIFICATIONS
auction listings delivered to your inbox

Login

Username:

Password:

Return

Vanleer Hardwoods Inc - Liquidation Auction - Vanleer, TN

Live Auction

View Gallery (184)

Auction Date(s)

Friday Aug 23, 2024 Completed

Auction Location

Vanleer, TN 37181

View Map

Company

Bright Star Realty and Auctions, INC

Contact: Loren Beachy
Phone: 574-825-0704
Website: brightstarauctions.com

Listing Terms and Conditions

Auctions Conducted Under These Terms. The Auction is conducted under and in accordance with these Terms, the Terms posted on Auctioneer’s website, applicable law, and any announcements or corrections made by Auctioneer during the Auction. By participating in the Auction, whether at the auction site, online, telephonically, or through any other means (including Absentee Bid), Bidder agrees to be bound by, and to abide by, these Terms.
Auctioneer’s Licensing and Bonding. Auctioneer is licensed and bonded where required.
Definitions. The following definitions apply to these Bidder Terms for each auction conducted by Auctioneer:

Bidder Registration. All persons desiring to bid at the Auction, must register to bid and be issued a Bidder Number. In order to register to bid, each potential Bidder must provide such information (including identifying information and qualifications) as requested by Auctioneer. Auctioneer may refuse to accept a Bidder Registration from any potential Bidder, may refuse to issue a Bidder Number to any potential Bidder, and, if a Registered Bidder breaches any Bidder Terms or engages in improper conduct, Auctioneer may revoke any Bidder Number. By registering to bid at the Auction, each Registered Bidder acknowledges and agrees that such Registered Bidder has read, understands, and agrees to be bound by, these Bidder Terms. In Auctioneer’s discretion, bids may be received from a person who has not registered to bid, and by placing a bid accepted by Auctioneer such unregistered Bidder will be bound by these Bidder Terms and will immediately complete a Bidder Registration.

Governing Law.
1. For Auctions in the State of Indiana and Online. Unless otherwise indicated, all Property is offered for sale in the State of Indiana, and will be sold in the State of Indiana. Notwithstanding the physical location of the Bidder or any Participant, these Terms are deemed to be entered into in the State of Indiana, all bids and payments are deemed to be received in the State of Indiana, and the contract, if any, will be deemed to be formed and entered into in the State of Indiana.
Buyer's Premium. All Property offered at the Auction is subject to a Buyer’s Premium, which will be paid by the Buyer to Auctioneer for Auctioneer's own account. The Buyer's Premium will be calculated as a percentage of the Hammer Price, and will be added to the Hammer Price to determine the final Purchase Price. Buyer agrees to pay the Winning Bid plus the applicable Buyer’s Premium.
Access to Auction Site. Participants assume all risks associated with their presence at the Auction Site or their access to the online bidding platform utilized by Auctioneer. Any person may be denied access to the Auction, the Auction Site, and the online bidding platform utilized by Auctioneer, and may be removed at Auctioneer’s discretion.
Nature of the Auction. This Property is being sold at the Auction in the manner indicated on the first page of this Agreement.
Bidding. Registered Bidders may only bid at the Auction by agreeing to be bound by these Bidder Terms. By bidding, each Registered Bidder acknowledges and agrees that such Registered Bidder has had a full and fair opportunity to read, and understands, these Bidder Terms, and affirms that such Registered Bidder is subject to and bound by these Bidder Terms.
No Bid Retraction. Bidder may not retract a bid that has been acknowledged by Auctioneer or that has been submitted online. Bidder acknowledges and agrees that Auctioneer is acting in reliance on tendered bids in the conduct of the Auction, and that bid retraction is disruptive and interferes with the Auction, and that, as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and for such Bidder to bid at the Auction, Bidder agrees not to withdraw or to attempt to withdraw any tendered bid that has been acknowledged by Auctioneer.
Online Auction. The following terms and conditions apply if the Auction is conducted, in whole or in part, online:
1. Online Bidding Registration. Anyone desiring to bid online, or to establish the possibility of bidding online, will be required to create an online bidding account by completing all necessary forms and providing required information.
2. Bidder Terms and Conditions; Notices and Announcements. The Auction will be conducted in accordance with Auctioneer's Terms and any notices or announcements by Auctioneer and/or posted on Auctioneer's website.
3. Posted Times. All times are based on the Eastern Standard Time zone unless stated otherwise. Posted closing times and time displays are approximate. Auctioneer reserves the right to close early or extend the Auction at any time at Auctioneer’s sole and absolute discretion.
4. Online Bidding Increments. Auctioneer may establish bid increments, and may modify or change bid increments, in Auctioneer's sole and absolute discretion.
5. Records of Online Activity. Absent clerical errors, Auctioneer’s records will be deemed final and conclusive.
6. Technology Disruptions. Auctioneer will not be responsible for technology disruptions, errors, or failures (including disruptions to bidding or the failure to execute, recognize, or record online bids), whether caused by (i) loss of connectivity, breakdown, disruption, or failure of the Online Auction Platform, (ii) breakdown, disruption, or failure of a Bidder's internet connection, computer, or system, (iii) viruses or software malfunction, or (iv) otherwise. Auctioneer may, but will not be required to, continue, suspend, delay, extend, reschedule, or close the Auction because of disruptions caused by technology failures, even after bidding has commenced.
7. Failures by Online Auction Platform Provider and its Affiliates or Contractors. Auctioneer may use an Online Auction Platform Provider to facilitate the Auction. Under no circumstances will Auctioneer be liable for any failure of the Online Auction Platform Provider to perform all or any of its obligations, or for the failure of any affiliates, employees, agents, representatives, or contractors of the Online Auction Platform Provider to perform their obligations.
8. Auto Extend Feature. Any Online Bidding Period may include an auto extend feature. This means that, if an online bid is entered within a set time period approaching the end of the established Online Bidding Period, the Online Bidding Period will automatically be extended for an additional amount of time in increments established by Auctioneer, and will continue to be so extended until there is a set period of time that lapses during which no online bids are received, after which bidding will close.

1. Disclaimer. Auctioneer makes no representations or warranties, and disclaims any representations or warranties, (i) that the Online Auction Platform or any related website or technology will be uninterrupted, error free or virus free, (ii) as to the results that may be obtained by using the Online Auction Platform or any related website or technology, or (iii) as to the accuracy, completeness, reliability, security, or current nature of the Online Auction Platform or any related website technology.
2. Responsibility for Online Bids. If a Winning Bid is sent to Auctioneer from the computer of a Registered Bidder, and is, thereafter, confirmed by Seller, such Registered Bidder will be the Buyer.
3. No Reduction or Retraction of Online Bids. Online bids may not be reduced or retracted.
4. Competing Online and Onsite Bids. In the event of contemporaneously made online and onsite bids, Auctioneer will determine which bid is the successful bid, and may, in Auctioneer’s discretion, reopen the bidding.
5. Winning Bidders Subject to Certification by Auctioneer. The final determination of the Winning Bidder is subject to certification by Auctioneer; and any email or electronic message (whether generated manually or automatically) is subject to such certification.
Absentee Bids; Remote Bidding. In Auctioneer’s discretion, Auctioneer may receive Absentee Bids and/or bids tendered by remote Bidders (whether telephonically or otherwise). All prebids and maxbids placed online are considered absentee bids. Auctioneer pledges complete integrity in the treatment of absentee bids and absentee bids may be initiated and advanced in accordance with Auctioneer’s policies and procedures. Auctioneer has the right to initiate any absentee bids at 25% to 50% of their maximum amount. Auctioneer will make reasonable efforts to execute Absentee Bids, but Auctioneer will have no liability to any Absentee Bidder for the failure to execute any Absentee Bids for any reason whatsoever. Each Absentee Bidder acknowledges and agrees that Property may be sold to another Bidder for the maximum amount of the Absentee Bid based on a bidding sequence that causes another Bidder to reach such amount first. If the execution of an Absentee Bid at its maximum amount would require Auctioneer to accept a bid that is less than a full bidding increment, Auctioneer has the sole and absolute discretion to accept or reject such bid. An Absentee Bidder may provide instructions to the Auctioneer to advance the bid by one or more bidding increments after the maximum amount of the Absentee Bid is, or would be, reached. Auctioneer acts only as the agent of the Seller, and the receipt and/or execution of Absentee Bids will not create an agency relationship between Auctioneer and any Absentee Bidder.
Bid Increments. Bid increments are established and controlled by Auctioneer, and may be adjusted or modified in Auctioneer’s sole and absolute discretion.
Registered Bidders Responsible for Bids Placed on Bidder Number. Each Registered Bidder is responsible for the Bidder Number issued to such Registered Bidder. Auctioneer is not responsible for monitoring or policing the use of Bidder Numbers, and each Registered Bidder is responsible for all bids made on the Bidder Number issued to such Registered Bidder even if the Registered Bidder claims that the Bidder Number was lost, stolen, or misappropriated, unless notice of a lost, stolen, or misappropriated Bidder Number was provided to Auctioneer prior to an unauthorized bid being made. Absent a clerical error, Auctioneer’s recording of bids against a Bidder Number will be conclusive as to the making of such bid by, or on behalf of, the Registered Bidder.
Withdrawal of Property. Auctioneer has the absolute right to withdraw any Property from the Auction prior to the Fall of the Hammer, unless the Property is explicitly provided that the Property is being sold at an Absolute Auction.
Winning Bid; Buyer. Pursuant to these Bidder Terms, the Bidder making the Winning Bid for any Lot of Personal Property will be the Buyer of such Property.
All Property Sold “AS IS”, “WHERE IS”, and “WITH ALL FAULTS”. ALL PROPERTY IS BEING OFFERED AND SOLD IN ITS AS IS/WHERE IS CONDITION AT THE TIME OF THE AUCTION, WITH ALL FAULTS, INCLUDING ANY HIDDEN DEFECTS OF ANY NATURE. NEITHER AUCTIONEER NOR SELLER MAKES ANY REPRESENTATIONS, WARRANTIES, OR GUARANTEES WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE NATURE, VALUE, SOURCE, AUTHENTICITY, FITNESS, MERCHANTABILITY, AND/OR ANY OTHER ASPECT OR CHARACTERISTICS OF SUCH PROPERTY. NO STATEMENT ANYWHERE, WHETHER EXPRESS OR IMPLIED, INCLUDING VERBAL STATEMENTS MADE BY AUCTIONEER, WILL BE DEEMED A WARRANTY OR REPRESENTATION BY AUCTIONEER OR SELLER. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THERE ARE NO WARRANTIES OF TITLE, NON-INFRINGEMENT, AUTHENTICITY, ORIGIN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EACH BIDDER ACKNOWLEDGES AND AGREES THAT HE, SHE, OR IT CANNOT RELY, AND HAS NOT RELIED, ON ANY REPRESENTATION, WARRANTY, OR GUARANTY MADE BY THE SELLER OR ANYONE ACTING AS AGENT OF THE SELLER, ORALLY OR IN WRITING, ABOUT THE PROPERTY, OR ANY OF IT. BY BIDDING, EACH BIDDER ACKNOWLEDGES AND AGREES THAT SUCH BIDDER HAS HAD A FULL AND FAIR OPPORTUNITY TO INSPECT THE PROPERTY, AND IS RELYING SOLELY ON, OR HAS WAIVED, SUCH BIDDER’S INSPECTION AND INVESTIGATION (i) IN DETERMINING WHETHER TO BID, (ii) IN DETERMINING THE AMOUNT OF A BID, AND (iii) IN BIDDING.
Announcements. Subject to the limitation set forth in these Bidder Terms, all terms and conditions and other announcements made by Auctioneer on the day of the Auction are binding and take precedence over any advertisements or listings.
Bidder’s Inspection. By bidding, each Bidder acknowledges and agrees that such Bidder has had a full and fair opportunity to inspect the Property, and is relying solely on, or has waived, such Bidder’s inspection and investigation (i) in determining whether to bid, (ii) in determining the amount of a bid, and (iii) in bidding. Bidder accepts any and all risks associated with the purchase and/or use of the Property. Bidder agrees to defend, hold harmless, indemnify, and protect both Auctioneer and Seller from any all claims of injury arising out of or relating to the purchase or use of the Property.
Description of Property. Unless otherwise expressly stated otherwise in writing, any description of Property is based solely on visual impression, and is given solely for identification purposes, and does not create any warranty, expressed or implied, or representation by Auctioneer.
Contract of Sale for Personal Property. By operation of these Terms, no additional or further writing will be required to evidence the existence of a contract of sale for any Personal Property Knocked-Down at the Auction regardless of the Purchase Price, and these Bidder Terms, together with Auctioneer’s clerking sheets or other physical or digital notation identifying the Lot, the Hammer Price, and the Buyer, will be conclusive evidence as to the terms of the sale. These Bidder Terms will be incorporated into the contract between each Buyer and Seller.
Bidding by or on Behalf of Seller. At an Absolute Auction there is no Seller bidding. The Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Absolute Auction. At a Reserve Auction, the Seller or anyone acting on the Seller’s behalf will not bid (directly or indirectly) on any Property put up at Reserve Auction, unless the Auctioneer announces and discloses that the Seller (or someone on behalf of the Seller) will be bidding at the Auction.
Conduct of the Auction. Auctioneer will regulate all matters relating to the conduct of the Auction and Auctioneer’s decisions will be final and binding. Auctioneer will have control over bidding, and Auctioneer will resolve any and all disputes. If (i) a bid is made while the hammer is falling in acceptance of a prior bid or while bidding is otherwise being terminated, or (ii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware of a bid that was unnoticed prior to the Fall of the Hammer or other termination of the bidding, and it is demonstrated to Auctioneer’s satisfaction that such bid was, in fact, timely made, or (iii) promptly after the Fall of the Hammer or other termination of the bidding Auctioneer is made aware that Auctioneer and a bid assistant or ringman, or multiple bid assistants or ringmen, have acknowledged bids in the same amount bid from different bidders, or (iv) some other bid dispute arises, Auctioneer may, in Auctioneer’s sole and absolute discretion, reopen the bidding (but will not be required to). Any contract formed with the Fall of the Hammer will be subject to the conditions set forth in this Section. If bidding is reopened pursuant to this Section, the bid recognized by Auctioneer prior to the reopening of the bidding will be held, and may not be retracted, and, if no further bids are received, such bid will be the Winning Bid.
Motor Vehicles and Equipment. Any and all motor vehicles and motorized equipment (including, without being limited to, automobiles, trucks, vans, recreational vehicles, motor cycles, motor scooters, tractors, earth moving equipment and other heavy equipment) must be paid in full prior to removal from the Auction Site; and, if any vehicles or equipment is paid for with a check, the vehicle or equipment will not be released unless and until the check clears the drawee bank and the funds have been received by Auctioneer.
All Sales Final. ALL SALES ARE FINAL. NO REFUNDS OR RETURNS.
Sales Tax. Subject to applicable exemptions, if any, each Buyer is responsible for the payment of sales tax for each Lot Knocked-Down at the Auction, which sales tax will be collected by Auctioneer at the time payment is made.
Payment. All Personal Property must be paid for in-full by onsite Buyers on the day of the Auction, at or before the conclusion of the Auction, and before any Property is removed from the Auction Site by or on behalf of the Buyer. Online purchases are due upon receipt of your invoice. Onsite purchases may be paid in cash or approved check, and, when authorized by the Seller and made available by Auctioneer, by credit card or debit card. Cash payments totaling Ten Thousand Dollars ($10,000) or more will not be accepted. If onsite bidders wish to send a wire, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. Online purchases must be paid by credit card or approved check; provided, however, that any online purchases in excess of Two Thousand Five Hundred Dollars ($2,500.00) must be paid by wire transfer or certified funds unless other arrangements are made with Auctioneer in Auctioneer’s sole and absolute discretion.

Wire Transfer Payments. Buyer shall obtain verbal verification of all bank account information from Bright Star Auctions prior to initiating transfer. Except as otherwise provided by law, we shall not be liable for any loss or damage due to misplaced, unauthorized or fraudulent fund transfers.
ACH/eCheck Payments. By providing account information to Bright Star Auctions, buyer gives permission for Bright Star Auctions to retain payment information on file and represents they are the authorized account holder. Upon authorization to collect payment from Buyer’s account and prior to transfer, Buyer is responsible to notify their financial institution of the impending transaction. Buyer agrees to notify Bright Star Auctions of any changes in account information.
Returned Checks. Any checks that are returned unpaid will be subject to a returned check fee in the amount of Fifty and 00/100 Dollars ($50.00). In addition to the foregoing, Auctioneer will be entitled to recover, from the issuer of a returned check, all costs and expenses, including attorneys’ fees, for the collection of payment made in the form of a check that has been returned unpaid.
No Stop Payment Orders or Credit Card Chargebacks. Each Bidder agrees that such Bidder will not, under any circumstances, (i) issue a stop payment order with respect to any checks issued at or in connection with the Auction, or (ii) initiate a credit card chargeback with respect to any purchases at the Auction. Each Bidder further agrees that if, in violation of these Terms, a stop payment order is issued or a credit card chargeback is initiated, these Terms will be conclusive evidence of the Bidder’s (i) waiver of any rights to issue a stop payment order or to initiate a credit card chargeback, and (ii) agreement not to issue a stop payment order or to initiate a credit card chargeback; and each Bidder acknowledges and agrees that on Auctioneer’s presentation of these Terms to the bank, credit card company, or other financial institution against which a check was drawn or that issued the credit card on which charges were made, such bank, credit card company, or other financial institution will reverse any stop-payment order and/or deny any credit card chargeback, and will re-credit all amounts to or for the account of Auctioneer. If, in violation of these Terms, a Bidder issues a stop payment order or initiates a credit card chargeback, such Bidder, even if successful, will remain liable for all purchases made at the Auction, and will be responsible for all costs and expenses, including attorneys’ fees, incurred by or on behalf of Auctioneer and/or Seller in challenging the stop payment order or credit card chargeback and in collecting payment. Each Bidder acknowledges and agrees that the covenant not to issue a stop payment order or to initiate a credit card chargeback is a condition to the issuance of a Bidder Number to such Bidder, and is being made as an inducement for Auctioneer to accept such Bidder’s Bidder Registration and to issue a Bidder Number. Each Bidder acknowledges and agrees that Auctioneer is relying on the covenant not to issue a stop payment order or to initiate a credit card chargeback in accepting such Bidder’s Bidder Registration and in issuing a Bidder Number.
Pick-up and Removal; Shipping. Each Buyer is responsible for removal of Lots purchased at the Auction, including shipping to remote Buyers. Pick-up and removal dates and times will be as posted on Auctioneer’s website or announced at the Auction. Unless otherwise agreed, each Buyer is solely responsible for the disassembly, removal, shipping, and transportation of each Lot purchased by such Buyer. Tools, packing material, and/or assistance will not be supplied at Pickup, so Buyer must plan accordingly. Disassembly and removal shall be done in a quiet and workmanlike manner, and each Buyer, in making its bid, shall thereby indemnify and hold harmless both Auctioneer and Seller against any and all damage caused by the acts of the Buyer, or such Buyer’s employees, agents, representatives, or independent contractors in connection with the Pickup. Any and all damages to the Pickup site, including, without being limited to damages to land or buildings, caused by a Buyer or by an employee, agent, representative, or independent contractor of a Buyer, will be repaired by, or at the expense of, such Buyer to the satisfaction of Auctioneer and Seller. Each Buyer must show a copy of the invoice (digital or hard copy) and government-issued photo identification before Lots will be released. No Buyer shall bring pets or young children to the Pickup, as the movement of Lots presents an extremely high-risk environment that could result in injury or death.
Insurance. Any work performed by Purchaser(s) or Purchaser Representative (including sub-contractors) shall be insured and provide proof of coverage against all claims for injuries against persons or damages to property which may arise from or in connection with the removal of items or equipment. Insurance coverage requirements are as follows: General Liability $1,000,000/$2,000,000 and Worker’s Compensation $1,000,000 or as required by State Law. Seller shall be listed as additionally insured, if required.
Abandoned Items. Any Lots not paid in full, not picked up and removed in the time provided (but, under any circumstances, within thirty (30) days after the Auction), or for which payment has not cleared (within five (5) days after the Auction), will be considered abandoned and may be offered for sale at a later auction or subject to other disposition. Such abandonment does not, however, relieve the Buyer or the Buyer’s obligation to make payment in full. Any payments made by or on behalf of a Buyer are non-refundable, and Buyers will remain responsible for the full purchase price of all Lots sold to them. In addition, Buyer’s bidding privileges may be suspended at future auctions.

Claims. With respect to Lots removed from the Auction Site by or on behalf of a Buyer, no claims or returns will be allowed and no claim will be allowed for adjustments or rescission of any sales based on the failure of a Lot to correspond with any standard and/or expectation of the Buyer.
Risk of Loss for Personal Property. Risk of loss with respect to Personal Property passes to the Buyer with the Fall of the Hammer. Neither Auctioneer nor Seller will be liable for any loss or damage to a Lot after such Lot is sold at the Auction, other than as may be directly and solely caused Auctioneer’s negligence, gross negligence, or intentional misconduct in handling and safeguarding the Lot while in Auctioneer’s sole and exclusive possession.
Buyer’s Remedies; Bidders/Buyers Not Entitled to Incidental or Consequential Damages. To the extent that any Bidder or Buyer may be entitled to damages or remedies, the sole and exclusive remedy available to Bidders and Buyers is a return of the Purchase Price actually paid. Under no circumstances will Auctioneer or the Seller be liable for incidental or consequential damages, including, without being limited to lost profits or reduced productivity. Each Bidder acknowledges and agrees that no Bidder or Buyer is entitled to specific performance or other equitable relief.
Seller’s Remedies. If any Buyer breached such Buyer’s obligations under these Terms or under a sale contract with the Seller of Property sold at the Auction, in addition to all other legal and equitable remedies, such property may be resold and the breaching Buyer will be responsible for any and all damages, including any deficiency or reduction in the Purchase Price, along with incidental damages.
Indemnification. Each Bidder agrees to indemnify, defend, and hold Auctioneer and Seller harmless from any current or future claim regarding the Auction or the Property, including, without being limited to, fitness, use, damage, safety, or injuries to persons or property.
Private Sale. No Participant or Registered Bidder may offer to enter into a Private Sale for the purchase of any of the Property prior to, during, or after the Auction. If any of the Property is not Knocked Down at the Auction and Bidder enters into an agreement to buy (i) any of the Personal Property from the Seller within ten (10) days after the Auction, and/or (ii) any of the Real Property within ninety (90) days after the Auction, Bidder shall pay to Auctioneer an amount equal to Auctioneer’s full commission and Buyer’s Premium.
Waiver. Certain provisions of these Bidder Terms are for the exclusive benefit of Auctioneer and/or Seller(s). Such provisions, including, without being limited to, Bidder registration and qualification requirements, deposit and payment terms (including the method, form, and timing of payment), removal and delivery terms, and Property inspection terms), do not create, and will not be deemed to create, any benefits or rights in favor of any other persons, including competing Bidders, and may not be enforced by any other persons. Either globally or on a case by case basis Auctioneer and/or Seller may (but will not be required to) waive any provisions of these Terms that are intended for the benefit of Auctioneer and/or Seller.
Compliance with the Law. Bidder shall not engage in any illegal conduct on the Auction Site and shall comply with all federal, state, and local laws. Bid pooling occurs when Bidders collude to regulate, and artificially suppress, bidding in an effort to reduce the Hammer Price. Anyone participating in bid pooling will be removed from the Auction Site and referred for prosecution. Theft is a serious offense, and, if discovered, will be prosecuted to the fullest extent of the law. Instances of theft will result in immediate termination of bidding and removal from the Auction Site.
Governing Law; Jurisdiction; Venue; Waiver of Jury Trial. These Bidder Terms will be governed by and construed in accordance with the laws of the State of Indiana, including its statutes of limitations, but without regard to its rules governing conflict of laws. All claims, disputes, and other matters between the parties will be brought in the state or federal courts sitting in and for Elkhart County, Indiana, which courts will have exclusive jurisdiction, and will be the exclusive venue, for any and all such claims, disputes, and other matters. By submitting a Bidder Registration and accepting a Bidder Number each Registered Bidder irrevocably and unconditionally (i) agrees that any claim or suit relating to these Bidder Terms, or the transactions contemplated hereby, will be brought in the state or federal courts sitting in and for Elkhart County, Indiana,; (ii) consents to the jurisdiction of such courts for any such claim, suit or cause of action; (iii) waives any objection that such party may have to the laying of venue of any such claim, suit or cause of action in such courts; and (iv) waives any objection to the bringing of such claim, suit or cause of action in such courts on the grounds of forum non conveniens. Each Bidder, Buyer, and other Participants waive the right to a jury trial.
Attorneys’ Fees. If any Participant breaches such Participant’s obligations under these Terms, Auctioneer and/or Seller will be entitled to recover all costs and expenses, including attorneys’ fees incurred in enforcing their rights.

Heavy Equipment Key Set 36 Keys
Shipping available for $20

SDRTOP Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

Stihl MS 271 Chainsaw
20" bar, includes 1 extra 20" bar with chain, and (1) 25" bar

Makita Electric Chainsaws
Both Models: UC4051A, both have 16" bars, 110V plug-in, includes 1 extra 16" bar with chain and (1) 20" bar

Jockey Grinder
Model: 06H, mounted on electric Milwaukee drill

95A

Jockey Grinder
Mounted on electric Milwaukee Drill

95B

Jockey Grinder
Model: 97E, mounted on Milwaukee electric drill

95C

Saw Grinder
Mounted on electric Milwaukee drill

Fromm Seal-less Strapping Tool
Model: A-335, SN: 0137707

96A

Fromm Seal-less Strapping Tool
Model: A335, SN: 0138642

96B

Fromm Seal-less Strapping Tool
SN: 0138993.
Model: A335.

Lumber Grading Tools
(2) grader sticks, (1) crayon holder

Lumber Grading Tools
(1) grader stick, (1) crayon holder

100

101

3 Strand Log Deck with Stop'n'Load
Hydraulic drive with Tulsa Gearbox, hydraulic cylinder on loading arm, H78 chain, includes support steel to ground, 10'6" x 18'6" x 7' tall

102

Morbark Log Trough
12" ladderback chain, hydraulic drive, hydraulic cylinders on kickers, 52" x 41' long

103

5hp Hydraulic Pack
24" x 36" x 12" tank, includes all hydraulic hoses to equipment

104

105

Carriage Track and Frame
(Part of an entirety) 55' of track, 64' long overall, includes frame to ground, does not include carriage feed or pulley, mounted to track, track is 50" center to center

106

107

108

Westinghouse Electric Motor
(Part of an entirety) 150 hp, 1780 rpm, 460V, 445T frame

109

WEG SSW-07 Soft Start
(Part of an entirety) 150 hp, SN: MC20737, 480V, 200 amp, includes 1' of conduit on both sides of box

110

Mellott 48" Chain Type Log Turner and Nose Skids
(Part of an entirety) Hydraulic drive and cylinder, includes control valve under cab, 4' x 10'6" nose skid section

111

112

113

Cleerman Operator's Cab
(Part of an entirety) 54" x 6' x 80" tall, does not include any controls or support steel, has AC unit, includes catwalk steps to cab

114

2005 Cleereman 36 3HB Carriage Entirety of Lots 104-113
With 10% raise.

115

116

Belt Conveyor
Electric drive, 20 1/2" belt, 32" x 37' x 56" tall

117

56" Circle Saw
F8 style, good condition

118

56" Circle Saw
F8 style, good condition

119

56" Circle Saw
F8 style, good condition

120

56" Circle Saw
F8 style, good condition

121

56" Circle Saw
F8 style, good condition

122

56" Circle Saw
F8 style, good condition

123

3 Strand Green Chain
Electric drive with Tulsa gearbox, C55B rooftop chain, 10' x 39' x 4' tall, 5' x 10' unloading nose skids on end

124

Vertical Edger Blades
3 pieces; (2) 20", 4" arbor, F8 style; (1) 20", F8 style, needs new arbor

125

126

WEG Electric Motor
(Part of an entirety) 75 hp, 364/5T frame, 460V, 1775 rpm

127

Motor Starters
(Part of an entirety) WEG SSW-06 Soft Start (SN: 1013525119, 75 hp), starter panel for shaker, blower, etc.

128

Morbark 24" Chip Blower
(Part of an entirety) Electric drive, top feed, 12" x 9'6" chip chute

129

Morbark Chip-Pac Entirety of Lots 125-128
With 10% raise.

129A

Mellott Vibrating Conveyor
Electric drive, 19" pan, 4" sides, includes chipper infeed section, 26" x 38' long

130

Rollers
4 1/2" x 45", 26 pieces

131

132

Barn Sweep
Electric drive, 14" paddles, includes all pan covers in building, 156' of chain throughout building-no pan, runs from husk to chipper

133

Barn Sweep
Electric drive, 14" paddles, no pan, 32' long or 64' of chain located under carriage track

134

Barn Sweep
Electric drive, 14" paddles, 18' flat section-no pan-under husk to side of building, 4' x 30' incline section

135

136

137

138

110V Electrical
Includes 110V breaker panel, includes all 110V conduit, wiring, and lighting in mill building

150

HMC Barn Sweep Pan
Model: WC3, SN: 669-80, no chain or drive, 15" max paddle size

151

Concrete Slab
45" x 22' x 12" thick, 38" x 30' long

152

Stacking Sticks
43" x 7' x 45" tall rack, 3/4" x 1 1/4" x 48" sticks, 1/2 poly sticks, 1/2 mixed species, approx. 2300 pieces total

153

Stacking Sticks
3/4" x 1 1/4" x 48" poly sticks, approx. 1350 pieces

154

Stacking Sticks
3/4" x 1 1/4" x 48" poly sticks, approx. 1350 pieces

155

Catwalk Section
2' x 6' top platform, 2' x 9'6" x 2' tall overall

156

Pusher Attachment for Loader
36" x 68" push plate, 19' long, 4 1/2" x 9 1/2" x 5' long fork pockets

157

Log Rack
97" x 102" x 122" tall overall, 82" x 90" x 62" high storage on top

158

Log Rack
97" x 102" x 122" tall overall, 82" x 90" x 62" high storage on top

159

Slab Rack
52" x 7' x 42" tall.

160

Slab Rack
45" x 6' x 30" tall

161

Tie-Stacking Rack
6' x 7' x 44" tall

162

Tie-Stacking Rack
7' x 90" x 44" tall

163

Jib Crane
8" max fork width, 6" tube steel-13' long

200

201

202

203

204

Cat Loader Forks
Quick attach, 6" x 55" forks, 64" wide, 74" high, mounted on lot # 201

205

Rockland Loader Forks
Model: LF, SN: 65860, Quick attach, 7" x 55" forks, 70" wide, 45" high, mounted on lot # 200

206

Cat Loader Bucket
SN: 140701926, quick attach, 3.0 cubic yard capacity, 45" x 100" x 4' tall

207

JRB Loader Bucket
SN: J0001010691, 42" x 105" x 45" tall, quick attach, 3 cubic yard capacity

209

Sawdust Bucket
Slip-on fork pockets, 50" x 8' x 45" tall, built of 3/8" plate steel

210

Loader Bucket
36" x 94" x 45" tall, pin through style

214

215

216

217

CSI DL-4400 Classic Bucksaw
Direct drive, 48" bar, 75" x 19'6" log rack

221

225

Log Trailer
11R24.5 tires, 4 bunk, 86" wide x 6' tall bunks, 38' long, bunk spacing: front to back 9'-15'-9'

230

1984 Fruehauf Chip Trailer
VIN: 1H2V04521EE001571, GVWR: 68,000 lbs., 45' long, 11R22.5 tires, 98" inside width, 108" inside height, half door in rear

231

Open Top Chip Trailer
GVWR: Approx. 65000 lbs., 92" inside width, 88" inside height, 40' long, 11R22.5 tires, tarp top, 92" inside width, 104" inside height, tarp top

232

Open Top Chip Trailer
GVWR: Approx. 65000 lbs., 11R22.5 tires, 40' long, 92" inside width, 104" inside height, tarp top

233

Chip Trailer
GVWR: Approx. 65000 lbs., 11R22.5 tires, 40' long, 92" inside width, 94" inside height

241

Shop-Built Trailer Dolly
10.0-20 tires, 2 axle, 5th wheel hitch, pin-through hitch, was pulled behind loaders

242

Shop-Built Trailer Dolly
10.0-20 tires, single axle, 5th wheel hitch, pin-through hitch, was pulled behind loaders

250

Chipper Knife Grinder
Electric drive, holds (2) 15" knives, 3' x 6', does not include chipper knives

251

Cutting Torch Set
Includes cart, gauges, leads, torch, tanks

252

253

Cabinet with Parts
18" x 3' x 6' tall, includes all contents, hand tools, chain parts, saw bits and shanks

254

Air Compressor
15 hp electric motor, 24" x 64" horizontal air tank, includes Van Air single tower air dryer and heat exchange unit, includes all air line hose from compressor to equipment

255

Table with Parts
12" x 50" x 32" tall wooden table, 2 hydraulic motors, gear chain, 6 brand new bearings

256

Rolling Tool Chest
28" x 30" x 42" tall, includes all contents, wrenches, hand tools, misc. hardware and parts

257

Knife Grinder
Electric drive with 110V plug-in, 36" long clamping bench, 20" x 4' x 56" tall overall

258

Werner 8' Step Ladder
300 lbs. capacity

259

Extension Ladder
16' max, includes step stool

260

Fluids
Compressor fluid, gear oil, grease tubes, assorted oils

261

Craftsman Power Washer
110V plug-in, 1900 psi, 102 gpm, includes 25' hose and wand

262

Floor Fan
30", on stand, 110V plug-in

263

Floor Fan
30", on stand, 110V plug-in

264

Box Fans
(2) 18" fans, 110V plug-in

265

Floor Fan
24", 110V plug-in

266

Banding Cart
Partial roll of 3/4" banding, snips

267

Banding Cart
Partial roll of 3/4" steel banding, needs new wheels

268

Banding Cart
Partial roll of 3/4" steel banding

269

Banding Cart
Partial roll of 3/4" steel banding, needs new wheels

270

Garden Hoses
3 pieces, lengths unknown

271

Carriage Cable
Partial roll of 3/4" coated steel cable

272

Wire Spool with Parts
36" x 27" tall spool, includes al parts on spool, hand tools, new bearing and pulley, air hose, partial spool of wire, sprocket, chain, 5 gallon cooler

273

Steel
Angle iron, shaft-stock, threaded rod, pipe

274

Hand Tools
Shovels, brooms, pry bar, 48" cant hook

275

Hand Tools
Shovels, brooms, fork, pry bar, 24" cant hook

276

Hand Tools
Shovels, brooms, pry bar, forks, scraper, sledge hammer

277

Barn Sweep Paddles
16-18" long, 15 pieces

278

Extension Cords and Air Hose
2 cords, (1) 3/8" air hose, lengths unknown

279

Parts
Misc. belts, misc. hydraulic hoses, (2) 21" conveyor belts-lengths unknown

280

Lights and Heater
(2) LED lights-110V plug-ins, 15 lbs. propane tank with heater

281

Catwalk Section
39" x 6' x 57" tall

282

Rebuilt Tulsa Winch Gear Box

283

Edger Blade
14", sharpened, 4" arbor

284

Trim Saw Blades
(3) 18", sharpened, 1 1/2" arbor

285

Lumber Grading Tools
1 grading stick, 2 crayon holders

286

New Gearbox
Brand new, never installed, made by Winsmith, 30:1 ratio, Size: E35, Model: XDNS

287

Parts
Electrical parts, misc. sprinkler parts

288

Cabinet of Parts
18" x 3' x 6' tall, includes all contents, belt lacing, manuals, filters

289

Cabinet of Parts
18" x 3' x 6', includes all contents, welding rods and helmet bearings, sprockets, cylinders, clamps, filters

290

New Mandrel Shaft
2 3/16" x 44"

291

New Shafts
(2) 1 7/8" x 26 1/2", (1) 2 3/16" x 26 1/2"

292

First Aid Kit

293

Office Furniture
Bench, folding table, office chair, 2 folding chairs, 2 desks, DeWalt 18V drill with battery and case

294

Office Appliances
3 space heaters, 2 microwaves, 1 window AC unit

295

Antique Vending Machine

296

Kelvinator Refrigerator
Electric

297

New Fluorescent Light Bulbs

300

Trailer Straps
(4) 4" straps

301

2" Fire Hose
6 hoses

302

3" Fire Hose
3 hoses

303

3" Fire Hose
3 hoses

304

3" Fire Hose
3 hoses

305

3" Fire Hose
3 hoses, 1 needs end repaired

306

Banding
New roll of 1" poly banding

307

Hand Tools
Shovel, forks, sledge hammer, pry bar

308

Hand Tools
Shovel, rake, cant hook, crow bar, cheater bar, 3' long 1" drive ratchet

309

Hand Tools
Cant hook, sledge, pry bar, bolt cutters

310

Pipe Benders
(1) 1", (1) 3/4"

311

Makita RBC 251 Weed Eater

312

Master Space Heater
140,000 BTU

313

Space Heaters
(1) Heat Fast 75000 BTU, (1) Master 80000 BTU

314

Excel Power Washer
2500 psi, 2.2 gpm, 5.5 hp Honda gas motor

315

1" Pex
Length unknown

316

Electrical Parts
Wire, fuses, breakers

317

Chipper Parts
Knife holders, counter knives

318

Conveyor Belts
(1) 36", (4) 22", (1) 18", lengths unknown

319

Parts
Tarp, extension cord, air hose, pvc fittings, sprockets, hydraulic hoses

325

Pipe Wrenches
All Ridgid, (1) 12", (1) 14", (1) aluminum 14", (1) 18", (1) 24"

326

Makita Electric Chainsaw
16" bar, 110 plug-in, 3 extra bars

327

3 1/2" Bench Vise

328

329

Shelf with contents
28" x 76" x 75" tall steel shelf, lots of truck parts, straps, binders, fuel jugs, hoses, air impact

330

New Feed Roll
2 1/2" x 46"

331

Toolbox
23" x 28" x 34" tall

332

333

3/4" Carriage Cable
Length unknown

334

3/8" Carriage Cable
Length unknown

335

Bolt Bin Organizer
12" x 35" x 42" tall, includes all contents

336

Waders
(2) pairs of waders, 1 duck decoy

337

Shop Press
22 ton bottle jack

338

Ridgid Pipe Threader
Includes bag of parts, clamps, stand

339

Werner 4' Step Ladder
225 lbs. capacity

340

Barrel of End Sealer
Partial barrel of Anchor seal 2, hand pump

341

New Banding
6 full rolls of 3/4" poly banding

342

Fluids
Bar and chain oil, assorted engine oil

343

Cabinet with Parts
18" x 3' x 6' tall, includes all contents, filters, fluids, hardware, truck parts

344

Floor Fan and Sprayers
24" fan, 3 sprayers

345

Bar and Chain Oil
(5) 1 gallon jugs

346

Misc. Lot
5 partial rolls of 16" clear poly, 7 qt. Mason jars

Vanleer Hardwoods Inc - Liquidation Auction - Vanleer, TNPrevious Page Listing ID#: 1641012

Free Email Notifications

Share This Listing

Other Sales byThis Company

Sponsored Links

Vanleer Hardwoods Inc - Liquidation Auction - Vanleer, TN

Login

Sign Up

Sign Up

Login

Vanleer Hardwoods Inc - Liquidation Auction - Vanleer, TN
Previous Page Listing ID#: 1641012

Other Sales by
This Company