00

Information Lot
Join us for the Robert Isaacs Custom Homes LLC Auction on August 9, 2024, starting at 9 AM Eastern Time. This onsite and virtual auction, located at 11493 Climax Rd, McKee, KY 40447, features the liquidation of assets including sawmill, rolling stock and more. Preview is available the week before from 8 AM to 4 PM or by appointment through Eugene Hochstetler. Don’t miss this opportunity to acquire quality equipment! This is an absolute auction with no minimums, no reserves, and no seller bidding—the highest bidder will be the new owner!

Auction Specialist: Eugene Hochstetler 574-242-1100

Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with.

 

01

Preview & Inspection
Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Preview is available the week before from 8 AM to 4 PM or by appointment through Eugene Hochstetler 574-242-1100

02

Loadout Information
Loadout will be available for 2 weeks after the auction by appointment with the seller.

03

Rigging Information
RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. 

Recommended Rigger: Paul Avery 270-543-1919
 

04

Payment Information
Payment terms: 6% sales tax, 10% Onsite and 15% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 
 

88

CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal
Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot.
https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s
 

89

Heavy Equipment Key Set 36 Keys
Shipping available for $20

90

SDRTOP Manual Sealless Steel Strapping Tool
Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30

91

Snap-On 8' Rolling Toolbox with Worktop Fully Loaded with Tools
30" x 8' x 6' tall, on castors, garage style door over worktop, includes all contents of box, hand tools, parts, fluids, etc., fully loaded and ready to go. Very nice Toolbox!

92

Milwaukee Reciprocating Saw
Includes case, 2 batteries, 2 chargers

93

Milwaukee Framing Nailer
Includes 3 batteries, 2 chargers

94

Milwaukee M12 ProPex Expansion Tool Set
Includes case, charger, (2) M12 batteries, 1/2", 3/4", and 1", pex heads, like new

95

DeWalt Cordless Tools
Drill, flashlight, jigsaw, sawzall, oscillating tool, 2 batteries, dual port charger, carry bag

96

Zircon MT6 Metal Detector
Brand new, comes with carry case

97

Echo Chainsaw
Model: CS-590, 24" bar, works

98

Stihl TS420 Concrete Saw
Mixed fuel, 12" blade, works

99

Bosch Jobsite Radio
Powered by 110V or 18V battery

100

Baker 3665D Portable Band Mill
SN: 18-937, model: BBS-03665D, meter reads: 872 hours, 1" x 28" band wheels, 1 1/2" bands, includes 3 extra new bands, log loading arm, 8' x 32'6" long overall, dual axle, Murphy shut-down, hydraulic turners, pop-ups, and controls, electronic setworks on stand, Cummins B3.3 4 cylinder diesel engine, includes flex pipe to PVC, 17'4" long bands

100A

New Bands
1 1/2" x 17'4" long, 10 new blades, fit lot 100

101

Belt Conveyor
Electric drive, 31" x 7' x 38" tall, 26" belt

102

Rollcase
Electric drive, 2 1/2" x 34" rolls, 6" spacing, 40" x 34' x 29" tall, (5) 1/2 hp, 460V electric motors, includes catwalk over rollcase

103

Rollcase
No drive, line shaft ready, 40" x 12' x 38" tall, 2 1/2" x 34" rolls, 6" spacing

104

Skate Rolls
16" x 10', 2" x 13" rolls, 6" spacing, includes 2 adjustable legs

105

Skate Rolls
16" x 10', 2" x 13" rolls, 6" spacing, includes 2 adjustable legs

106

Baker Edger
(1st of an entirety) SN: 11382, model: BE-0, 3' x 4' infeed rolls, 4" x 30" capacity, 15 hp electric motor, (2) 10" blades-1 moveable, (2) 2' x 30" power feed belts-hydraulic drive on feed belts, includes flex pipe to PVC

107

Landing Tilt Table
(Part of an entirety) 4' x 12' x 46" tall, air cylinders

108

Dead Rolls
(Part of an entirety) 40" x 30' x 38" tall, no drive or gear chain-has sprockets, 2 1/2" x 34" rolls, 6" spacing

109

Baker Edger with Return System Entirety of Lots 106-108
With 10% raise.

110

2 Strand Transfer Deck and Unscrambler
6' x 11'6", H78 chain, 4" x 12" strands, hydraulic drive, includes shaft. Unscramber-Hydraulic drive, 4' x 56" wide, 2" x 55" steel slats,

112

Rollcase
Hydraulic drive, 5 1/2" x 12" rolls, 12" spacing, 30" x 10'6" x 45" tall, hydraulic cylinders on pop-ups and stops

113

Baker Chop Saw
Model: BC0-0, SN: 99-290, 26" blade, includes 1 extra blade, 15 hp electric motor, hydraulic cylinder on head, includes control stand, electric starter and disconnect panels, 21" x 8' rollcase outfeed, 4" x 14" rolls, 11" spacing, electric drive on rolls, air cylinders on board stops, includes flex pipe to PVC

114

Vickers 5hp Hydraulic Pack
SN: 99J-32370-01, 18" x 23" x 20" tank, includes valve bank with controls and all hydraulic lines to equipment

115

North Tech Industrial Single Head Resaw with Return Belt
(1st of an entirety) 25 hp, 460V electric motor, electric control panel and cut-off box, hydraulic unit or feeds, 1 1/2" band, 1" x 30" band wheels, 15" x 9' feed belt, 15" x 9' return belt, electronic setworks, 6" x 16" capacity, includes flex pipe to PVC, 16'1" long bands

116

Skate Roll Return
(Part of an entirety) 2" x 13" rolls, 6" spacing, adjustable legs, (1) 8' section-drop down to 45" section

117

North Tech Resaw Entirety of Lots 115-116
With 10% raise.

117A

New Bands
1 1/2" x 16'1", fits lot 115, 25 new blades

118

Wood-Mizer HR1000 2 Head Resaw
(1st of an entirety) SN: HR1000E025-2-10180651A2.04, Meter reads: 1349 hours, 480V, 3 ph, includes electrical control panel, 8" x 12' chain conveyor feed, 3/4" x 34" band wheels, 1 1/2" bands, includes 5 extra new bands, Auto-Lube system, 25 hp electric motor on each head, hydraulic drive on feed and power feed rolls, self contained hydraulic pack, includes hydraulic lines to runaround system, 17'1" long bands

119

Wood-Mizer Infeed Turn-Table
(Part of an entirety) 78" x 100" x 40" tall, 3" x 8" rolls, 13" spacing, set of rolls on either side, 5 strand 4' x 80" transfer, hydraulic drive, air push cylinders

120

Wood-Mizer Outfeed Turn Table
(Part of an entirety) 78" x 100" x 40" tall, 3" x 8" rolls, 13" spacing, set of rolls on either side, 5 strand 4' x 80" transfer, hydraulic drive, air push cylinders

121

Wood-Mizer Return Chain Conveyor
(Part of an entirety) SN: 05160609, 6" chain, 9" x 12', hydraulic drive,

122

Wood-Mizer HR1000 Resaw with Runaround Entirety of Lots 118-121
With 10% raise.

123

De-Duster
Electric drive, cut-off box, 8" x 90" feed belt, 6" x 8" capacity, 27" x 6' landing table, includes flex pipe to PVC

124

Brewer Single Head Notcher
Model: BR-DE-CF, SN: 122801, electric drive, 460V, includes electric control panel, and cut off box, 9'6" long chain with peg feed chain, 8" width capacity, adjustable height capacity, 5 hp hydraulic pack for feed

125

Morgan Cut-Off Block Saw
42" x 7' x 40" tall, electric drive, 9" x 6' incline outfeed belt, 24" blade, includes flex pipe to PVC

126

Baker 4-Tier Stack Rack
Model: BSR-0, SN: 20-535, 7' x 7' x 6' tall overall, each section is 42" x 42" x 57" tall, rotates on base, fork pockets

127

Morgan Single Head Notcher
Electric drive, 480V, uninstalled, 6" x 9'6" feed belt

128

100 Gallon Diesel Transfer Tank
2' x 45" x 2' tank, GPI 12V pump with hose and nozzle

129

Diesel Fuel Tank
30" x 64" x 24" tank, hand pump with hose and nozzle

130

Diesel Fuel Tank
30" x 70" x 42" tank, 110V plug-in for pump

131

16" Dust Blower
Electric drive, 8" inlet and outlet, includes all PVC pipe from equipment to blower and from blower to cyclone, 30' of 6" from blower to cyclone, 50" of 6", 24' of 4" PVC, lots of adapters and fittings, no flex hose included

132

Dust Cyclone
6" x 8', includes dust lock at bottom with 6" x 8' unloading auger, electric drive

133

36" Dust Blower
(1st of an entirety) 25 hp electric motor, includes all black PVC pipe, outside building approx. 70' of 10" PVC, 10" inlet and outlet, includes steel frame around black dust pipe, 4"-13', 45", 14", 4"

134

PVC Dust Pipe
(Part of an entirety) Includes all dust pipe from lot 133 to equipment, no flex pipe included, 38' of 10", 70' of 6", 75' of 4", lots of fittings and adapters, includes (2) Shop-Vac Reels

135

Dust Cyclone System
(Part of an entirety) Approx. 3' x 12' cyclone on top, 10' x 12' big cyclone with dust lock and unloading auger on bottom, 8" x 15' auger with electric drive, includes entire steel frame

136

Dust Collection System Entirety of Lots 133-135
With 10% raise.

138

2007 Ingersoll Rand G125 Portable Genset
VIN: 4FVGPBCB57U377271, meter reads: 3943 hours, ST225/75R15 tires, (2) 6-lug axles, 100kw, John Deere 6068TF275 engine, engine SN: PE6068T613268, 12V battery, master disconnect switch, 3 ph, 480V

139

New Foster 5hp Hydraulic Pack
Model: 50-1-4E, SN: 225461, never installed, 12" x 30" x 12" tank, cooling unit, valves

140

Murphy 14" Dust Blower
7" inlet, 6" outlet, Uninstalled, electric drive with 4 prong plug-in

141

Miller SRH-444 Welder
SN: LC599267, 230/460V, 3 ph, 19.6kw, 400 amp output

142

Hobart Handler 190 Wire Welder
SN: MK049878N, 25-190 amp output, includes helmet, gloves, tank, cart, leads and gun, 220V plug-in

143

Self Dumping Hopper
On castors, 3' x 5' x 30" deep

144

Self Dumping Hopper
3' x 4' x 2' deep

145

Floor Fan
42", 110V plug-in, on castors

146

Floor Fan
24", 110V plug-in, on stand

147

Skate Rolls
92" x 15' x 38" tall, 2 1/2" x 88" rolls, 13" spacing

148

Lumber Rack
5' x 12'

149

Lumber Rack
5' x 12'

150

Lumber Rack
5' x 12'

151

Rollcase
Electric drive, 6 1/2" x 30" rolls, 30" spacing, 5 spiral rolls

152

Skate Rolls
30" x 10', 2" x 26 1/2" rolls, 6" spacing

153

Unverferth Enclosed Belt Conveyor
7 1/2" cleated belt, 19'6" long top feed, hydraulic drive

154

Rollcase
Electric drive, 2 1/2" x 52" rolls, 6" spacing, 4' x 58"

155

20hp Hydraulic Pack
24" x 35" x 18" tank, valve bank, 460V

156

Continental 5hp Hydraulic Pack
15" x 17" x 14" tank, stand with hydraulic controls, hydraulic hoses

157

Pallet Nailer
3-strand, air over electric powered, no nail guns, auto stacker, pallet of parts and stacker arms included, 8' x 12' x 99" tall overall

250

TCM FHG36N8 Forklift

SN: 46400369.
Meter reads: 1,715 hours.
Engine: 6 cylinder.
Fuel type: LP-2 tanks included.
Load capacity: 8,000 lbs.
Stage mast: 2.
Mast height: 106".
Side shift: 157 1/2".
ROPS: Open.
Tire size: (front) 7.5-15, (rear) 7.0x12.
Tires: Solid.

Features and Notes: 6" x 60" forks.

 

251

Clark C30B Forklift
SN: C30B-544-463.
Meter reads: No meter.
Engine: 4 cylinder.
Fuel type: Gas.
Load capacity: Approx. 3,000 lbs.
Stage mast: 2.
Mast height: 7'.
Side shift: No.
ROPS: Open.
Tire size: 18x8x12 1/8.
Tires: Solid.

Features and Notes: 4" x 42" forks. Starts, runs, and operates. 

255

2018 Case TR340 Skid Steer
SN: NJM453017 (PIN: JAFTR340HJM453017).
Meter reads: 966 hours.
Engine: FPT 3.4L.
HP: 84-90.
Fuel type: Diesel.
ROPS: Fully enclosed.
Controls: Joystick.
2 Speed: Yes.
Highflow: Yes.
Quick attach: Power.
Lift capacity: 3,400 lbs.
Attachments: None included.
A/C: Yes.
Heater: Yes.

Features and Notes: 18" tracks. Runs and operates well.

256

Kubota Skid Steer Forks
SN: 1071253K, 4" x 48" forks, 46" wide, quick attach

257

Skid Steer Bucket
26" x 82" x 18" tall, standard quick attach

258

Fork Extensions
7' long, 2 1/2" x 5 1/2" fork opening, made of 1/4" steel

260

TCM 835-2 Wheel Loader
SN: 64301196.
Meter reads: 8,618 hours.
Engine: Zexel 6 cylinder.
Fuel type: Diesel.
ROPS: Enclosed.
3rd Valve: No.
Center to center of pins: 21".
Lift capacity: 5,650 lbs.
Operating weight: 19,440 lbs.
Tire Size: 17.5R25.
Attachments: 6" x 36" pin-through forks-5' wide.
Heater: No.
A/C: No.
Quick Attach: No.

Features and Notes: Starts, runs, and operates. Includes 1 new tire.

265

Kubota KX040-4 Excavator
SN: KBCDZ15CPL3A36218.
Meter reads: 933 hours.
Engine: Kubota D1803 (SN: 7KV6538).
HP: 40.
Fuel type: Diesel.
Bucket: 24", 5 tooth.
Hydraulic thumb: Yes.
Heater: Yes.
A/C: Yes.

Features and Notes: 6' 6-way blade, 14" tracks, axillary hydraulics, quick coupler. Starts and operates well

266

Excavator Jack Hammer
2 hose hydraulic hookup, quick attach, was used on lot 265

267

RUT MFG Excavator Brush Cutting Attachment
Model: E-BE-36, 20 gpm, 36" cutting width, quick attach, 2 hose hydraulic hook-up, was used on lot 265

268

Excavator Bucket
12", 3 tooth, quick coupler, fits lot 265

270

2000 International 4900 4x2 Dump Truck
VIN: 1HTSDAAR0YH224756
Meter reads: 72,232 miles.
Engine: DT 466E.
Transmission: Automatic.
GVWR: 36,220 lbs.
Front axle rating: 13,220 lbs.
Rear axle rating: 23,000 lbs.
Heat/AC: No.
Wet kit: No.

Features and Notes: 152" WB, Henderson bed (SN: HDSA-08706, model: 10x30x0B), 8' x 10' x 30" high bed, 11R22.5 tires, single axle, includes 10' snow blade. Starts and runs. Has title.

275

2019 Gator Gooseneck Flatbed Trailer
VIN: 4Z1GF2522KS000377, GVWR: 16000 lbs., (2) 7000 lbs. axles, 33' long overall, 101" x 20' main deck, 5' dovetail, 40" x 5' ramps, 235/80R16 tires, storage box for straps/chains, includes contents of box. Has title. 

276

Equipment Tag Trailer
Pulls with pintle hitch, tri-axle, 8-14.5 tires, 26' long overall, 8' x 16' main deck, 5' dovetail, 20" x 5' ramps. No title, bill of sale only.

277

Kohler 60kw Portable Genset
Generator model: 60RE0ZJB, SN: 2031192, Meter reads: 1264 hours, 120/240V, single or 3 ph., 12V battery system, John Deere 4045TF270E engine, engine SN: PE4045T439385, pulls with pintle hitch, ST235/85R16 tires.

280

Helicopter
4 cylinder gas motor, includes blades-not installed. Does run

285

Drain Tiles
Coil of 4 1/2" drain tile-length unknown, lots of PVC tiles-(20) 6 1/2" x 10' PVC tiles, (8) 10' sticks of 4" PVC, assorted smaller pieces

286

20' Shipping Container
Inside height-94", inside width-94", water-tight, includes all contents

287

20' Shipping Container
Inside height-94", inside width-94", water-tight, includes all contents

288

Hytrol Belt Conveyor
Electric drive, on castors, 8" cleated belt, 14" x 5' x 52" tall overall

289

ACS Belt Conveyor
Electric drive, 10" belt, 20" x 42" x 62" tall overall

290

Werner 10' Step Ladder
300 lbs. capacity

291

Werner 8' Step Ladder
300 lbs. capacity

292

Werner 10' Step Ladder
300 lbs. capacity

293

Electric Motors
2 motors, both identical, 15 hp, 460V, 254T frame, 3510 rpm

294

Werner 8' Step Ladder
300 lbs. capacity

295

Werner 10' Step Ladder
300 lbs. capacity

296

Werner 6' Step Ladder
375 lbs. capacity

297

Extension Ladder
Compact when folded, extends up to 16'

298

299

300

AC Delco Floor Jack
4500 lbs.

301

Trash Cans
(2) 55 gallon, (1) 10 gallon

302

Hand Tools
Shovels, broom, cant hook, post hole digger, splitting maul

303

Hand Tools
Shovels, brooms, post hole digger, dbl sided axe, pry bar

304

Hand Tools
Shovel, broom, cant hook, pry bar

305

Clamps
(2) Jorgensen 36" clamps, like new

306

Homemade Steamer Unit
10 1/2" x 16' PVC tube with door, (2) 15 lbs. LP tanks with heating unit

307

Haul Master Pallet Jack
5000 lbs. capacity, 6 1/2" x 48" forks, 27" wide

308

Banding Cart
Partial roll of 5/8" steel banding, banding tools

309

Bosch 10" Table Saw
110 plug-in, 26" x 31" table top

310

DeWalt Chop Saw with Stand
12", 110V plug-in, adjustable stand

311

DeWalt Planer
110V plug-in, 6" x 13" capacity, includes stand

312

DeWalt Space Heater
140000 BTU, 110V plug-in and fuel

313

16 Gallon Shop-Vac
6 hp, 110V plug-in

314

Craftsman Radial Arm Saw
10" blade, 110 plug-in

315

Ridgid Wet/Tile Saw
110 plug-in, on stand with tray, 8" blade

316

Porter Cable 6" Variable Speed Bench Jointer
110 plug-in

317

DeWalt 14" Metal Cut-Off Saw
110 plug-in

318

Honda EU2000 Generator
Starts and runs

319

Power Matic Table Top Drill Press
Model: 701, SN: 1791310, 110V plug-in

320

Gmax 5900 Gas Powered Airless Paint Sprayer
Honda GX160 gas motor, includes hose and wand

321

322

Kobalt 7" Chop Saw
110V plug-in

323

Bosch Hammer Drill
Model-RH540M, includes case, 110V plug-in

324

Stinger Cap Stapler
Model: CS150, air powered, includes case and 2 partial boxes of caps and staples

325

DeWalt Tools
Corded plate jointer with case, 18V 1/2" impact with battery and case

326

Hitachi Router Set
110V plug-in, includes case

327

Pallet of Tools
Paslode battery nailer, Dremel, Makita hammer drill, (2) Hitachi 18 ga brad nailers, Metabo 2 1/2" 15 ga finish nailer, Hitachi 2 1/2" 15 ga finish nailer

328

Pallet of Tools
Stinger cap slap staplers, assorted DeWalt cordless tools, Bosh jigsaw, Hitachi 2" 18 ga brad nailer, Bostitch 18 ga brad nailer

329

Pallet of Tools
Skill saws, beam cutting saws, framing nailers, roofing nailers, DeWalt hand planer and sander, heat gun, fan

330

Pallet of Tools
Saw horses, Bostitch 18 ga narrow crown, stapler, assorted chop saw and metal cut off saw blades, hand tools

331

Pallet of Tools
Hilti hammer drill, fuel jugs, work light, tool pouches, safety harnesses

332

Pallet of Tools
Fuel jugs, skill saw, hand tools, extension cords, fasteners, saw horses, Bosch "Bulldog" Hammer drill

333

Sand Blasting Tank
On castors, holds up to 110 lbs. of pressure

334

LP Heaters
(2) 15 lbs. tanks with heaters

335

Forklift LP Tank
Empty

336

Forklift LP Tank
Empty

337

Anvil
3 1/2" x 24" x 11" tall

338

Pex Pipe
Some 1", some 1/2"

339

20 Ton Shop Press
Air powered bottle jack

340

Shelf with Tools
16" x 30" x 62" tall shelf, skill saw, grinders, parts, concrete hand tools

341

Parts
Includes all contents on floor under shelves in parts room, bearings, motors, fasteners, fittings, wire, hand tools, air blaster, tank

342

Hand Tools
Includes all contents on lower shelf in parts room, Milwaukee hole saw set, hedge trimmer, 1st Aid kits, fasteners, chainsaw grinder, hand tools, hydraulic parts

343

Parts
Includes all contents of top shelf in parts room, belts, air cylinders, electric motors, wire, fluids, towels, grease