THIS IS A COMPLETED SALE
View current listings by this company
View current listings by this company
Robert Isaacs Custom Homes - Sawmill Equipment - McKee, KY
Previous Page Listing ID#: 1631072
Auction Location |
---|
McKee, KY 40447 |
Auction Dates and Times |
---|
Friday Aug 9, 2024 Completed |
Auction Type |
---|
Live Auction |
Company Information |
---|
Bright Star Realty and Auctions, INC Contact: Loren Beachy Phone: 574-825-0704 Email: beachyauctions@gmail.com Website: brightstarauctions.com GoToAuction.com ID#: 5286 View company information and listings |
Free Email Notifications
Sign up for the GoToAuction.com email notifications and we will let you know about sales in your area! You may set up alerts by area (zip and radius), keywords, and by company. It is FREE and only takes a few seconds to sign up.
Listing Terms and Conditions |
---|
Bidder Terms and Conditions There is a 13% online buyer’s premium in effect for all purchases made online. Buyer’s premium is 10% for onsite bidders. All items sell where is as is with no warranties or guarantees. Buyer is responsible to inspect all merchandise prior to placing bids. Payment terms: Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. All items are pick-up only. Smalls must be removed within 2 days. All items must be removed within 30 days unless otherwise noted. Loadout available day of auction, after that by appointment. Please call agent for more info. Buyer shall assume responsibility of all property when auctioneer says sold. Auction company is not responsible for any missing or stolen items. These Bidder Terms and Conditions (“Terms”) apply to auctions conducted by BRIGHT STAR REALTY AND AUCTIONS, LLC and constitute a legal, valid, binding, and enforceable contract between Auctioneer and the Bidder. These Terms also form the basis for the final contract of sale between the Seller and the Buyer.
“Absentee Bidder” means a person or entity that submits an Absentee Bid. “Absolute Auction” or “Absolute” applies only if and when expressly indicated and means that property is to be sold to the highest bidder regardless of the amount of the final bid, with no limiting conditions, restrictions, or reservations. UNLESS SPECIFICALLY AND EXPRESSLY STATED BY AUCTIONEER IN WRITING, NO PROPERTY IS BEING SOLD ABSOLUTE OR AT AN ABSOLUTE AUCTION. “Auction” means the auction sale at which Auctioneer solicits bids, or is scheduled to solicit bids. “Auction Site” means the physical location of the Auction, or, for an Auction conducted entirely online, the location at which Property may be inspected. “Bidder Number” means the number or other identifier issued by Auctioneer to a Registered Bidder for the purposes of identifying bids to such Registered Bidder. “Bidder Registration” means the information provided by a prospective Bidder, and the process of registering such prospective Bidder, to bid at the Auction, including the prospective Bidder’s agreement to be bound by these Bidder Terms. “Broker Participation Fee” means an amount that is paid to a broker who has participated in procuring a Buyer, or has otherwise assisted in facilitating the sale of Property at the Auction, under the Terms and in the amount established by Auctioneer. "Buyer" means the Winning Bidder with respect to each Lot of Personal Property. "Buyer's Premium" is an amount with respect to each Lot of Personal Property sold at the Auction, calculated as a percentage of the Hammer Price, that is payable by the Buyer to Auctioneer for Auctioneer's own account. “Fall of the Hammer” means the point, after bids have been received, at which Auctioneer declares a Lot of Personal Property “sold” to Bidder acknowledged by Auctioneer as having made the Winning Bid. During an auction that is exclusively online, the Fall of the Hammer will occur electronically at the end of timed (or extended) bidding. In an auction that is Subject to Seller’s Confirmation, the Fall of the Hammer will occur on Seller’s Confirmation of the High Bid Subject to Confirmation. “Hammer Price” means the high bid amount recognized by Auctioneer with the Fall of the Hammer. “High Bid” means the high bid amount recognized by Auctioneer at the conclusion of bidding on a Lot. “High Bid Subject to Confirmation” means the High Bid amount recognized by Auctioneer at the conclusion of bidding on the Lot put up at Auction Subject to Seller’s Conformation. If the High Bid Subject to Conformation is confirmed by Seller, it will be the Hammer Price. “High Bidder” means the Bidder recognized by Auctioneer as having made the High Bid with respect to a Lot. "Knocked Down" or "Knock Down" means, with respect to any Property put up at the Auction, that Auctioneer has acknowledged the Winning Bid with the Fall of the Hammer, or by announcing "sold", or by giving a similar such indication. Property may be Knocked Down electronically at the conclusion of a timed online auction event. “Lot” means each individual item or grouping of Personal Property offered at one time by Auctioneer. “No Sale” occurs if Property is put up at the Auction but is not Knocked Down or sold, and Auctioneer passes on such Property or declares a No Sale. “Online Auction Platform” means the hardware and software utilized to conduct the Auction online and to facilitate online bidding, including any associated, adjunct, and/or complementary websites, services, premiums and promotions. “Online Auction Platform Provider” means the provider of the Online Auction Platform and related services to conduct Auction online. "Online Bidding Period" means, with respect to an Auction conducted in whole or in part online, any established period during which bids may be tendered. “Participant” means any person who attends, or otherwise participates in, the Auction (in person or remotely). The term Participant includes, but is not limited to, Registered Bidders, Bidder, and Buyers. “Personal Property” means all tangible and moveable property, including fixtures, designated as Property. “Pick-up” means the act of picking up or removing sold Lots by respective Winning Bidders at the date(s), time(s), and location indicated for such during the Auction or as later agreed to by Seller and Buyer. “Private Sale” means an event in which Property is sold by Seller, or on Seller’s behalf, other than at the Auction (including a sale at an auction conducted by a person or entity other than Auctioneer). “Private Sale Price” means the fair market purchase price of the Property paid, or agreed to, at a Private Sale in an arms-length transaction between Seller and the purchaser of the Property. If the Property is sold through a Private Sale for less than its fair market value, or in a transaction that is not an arms-length transaction, or is gifted by Seller, the Private Sale Price will be an amount equal to the fair market value of the Property in an arms-length transaction. “Property” means the Real Property and the Personal Property. “Purchase Price” means an amount equal to the Hammer Price or High Bid Subject to Confirmation, as the case may be, plus the Buyer’s Premium. "Registered Bidder" means a person or entity that has registered to bid at the Auction. “Registration Deposit” means, if required by Auctioneer, the deposit, in certified funds, made by a Registered Bidder in order to register for the Auction. “Reserve” or “With Reserve” means that the Auctioneer may Withdraw Property put up at Auction and/or bids may be rejected prior to the Fall of the Hammer. UNLESS SPECIFICALLY AND EXPRESSLY STATED OTHERWISE BY AUCTIONEER IN WRITING, ALL PROPERTY IS BEING WITH RESERVE. “Reserve Price” means the minimum price that Seller is willing to accept for specific Property. “Seller’s Confirmation” means Seller’s confirmation, approval, and acceptance of the High Bid Subject to Confirmation acknowledged and recorded by Auctioneer. “Subject to Seller's Confirmation” means, with respect to any Property expressly identified in this Agreement as being sold Subject to Seller’s Confirmation, that after the High Bid Subject to Seller’s Confirmation has been received and acknowledged by Auctioneer, Seller may determine, in Seller's sole and absolute discretion, to (i) accept such bid or (ii) reject such bid. “Winning Bid” means the highest bid received and accepted (and if Subject to Seller’s Confirmation, confirmed by Seller). "Winning Bidder" means the Bidder who is recognized by Auctioneer as having made the Winning Bid. “Withdraw” refers to the circumstance in which the Property is removed from the Auction, or in which it is determined that such Property will not be offered or sold at the Auction.
|
Listing Information |
---|
Join us for the Robert Isaacs Custom Homes LLC Auction on August 9, 2024, starting at 9 AM Eastern Time. This onsite and virtual auction, located at 11493 Climax Rd, McKee, KY 40447, features the liquidation of assets including sawmill, rolling stock and more. Preview is available the week before from 8 AM to 4 PM or by appointment through Eugene Hochstetler. Don’t miss this opportunity to acquire quality equipment! This is an absolute auction with no minimums, no reserves, and no seller bidding—the highest bidder will be the new owner! 00 Information Lot Join us for the Robert Isaacs Custom Homes LLC Auction on August 9, 2024, starting at 9 AM Eastern Time. This onsite and virtual auction, located at 11493 Climax Rd, McKee, KY 40447, features the liquidation of assets including sawmill, rolling stock and more. Preview is available the week before from 8 AM to 4 PM or by appointment through Eugene Hochstetler. Don’t miss this opportunity to acquire quality equipment! This is an absolute auction with no minimums, no reserves, and no seller bidding—the highest bidder will be the new owner! Auction Specialist: Eugene Hochstetler 574-242-1100 Titled Vehicles: Once your payment is received and clears our bank, you will be contacted to confirm your information. You can expect Your title within 7 business days after the information is confirmed. If you do not contact us to confirm your information, you will receive the title approx. 30 days after the auction and it will be filled in with the information that you registered with. 01 Preview & Inspection Buyers are responsible to do their own inspection to determine the condition of the items they purchase. Inspections times are available as follows: Preview is available the week before from 8 AM to 4 PM or by appointment through Eugene Hochstetler 574-242-1100 02 Loadout Information Seller will help with loadout. 2 weeks for loadout. 03 Rigging Information RIGGING IS COMPLETELY THE BUYER’S RESPONSIBILITY. WE HIGHLY RECOMMEND YOU HIRE THE RECOMMENDED RIGGERS. IF YOU DO CHOOSE TO DO YOUR OWN RIGGING OR HIRE ANOTHER RIGGER, YOU MUST PROVIDE US WITH SATISFACTORY PROOF OF LIABILITY INSURANCE COVERAGE OF UP TO 1 MILLION DOLLARS IN COVERAGE. ALL BUYERS ARE COMPLETELY RESPONSIBLE FOR ANY DAMAGE THEY DO TO THEIR OWN EQUIPMENT OR ANYONE ELSE’S PROPERTY OR EQUIPMENT WHILE RIGGING. Recommended Rigger: Paul Avery 270-543-1919 04 Payment Information Payment terms: 6% sales tax, 10% Onsite and 13% Online Buyer's Premium in effect for all purchases. Cash, check, wire transfer. Cash Payments totaling $10,000 or more will not be accepted. Credit cards are only accepted on invoices with a total of less than $2500. All payments are due immediately upon receipt of your invoice. Onsite buyers, payment is due the day of the auction. If onsite bidders wish to send a wire and still be assessed only the onsite buyer’s premium, they must present a bank letter of credit (with limit stated equal to or higher than the amount owed by bidder) and wire must be sent no later than one business day after the auction. 88 CAT 390F L Hydraulic Excavator 1:50 Scale Replica - Die Cast Metal Have fun buying a high-quality, die-cast toy! All proceeds including buyer's premium will go to Feed My Starving Children (FMSC) which is a Christian nonprofit dedicated to seeing every child and person around the world healthy, nourished and whole in body and spirit. Bright Star will pay for standard shipping and handling to the 48 contiguous states for buyers of this lot. https://www.youtube.com/watch?v=jYATxeDmuzM&t=8s 89 Heavy Equipment Key Set 36 Keys Shipping available for $20 90 SDRTOP Manual Sealless Steel Strapping Tool Model A333, works for 1/2" 5/8" or 3/4" banding, new in box. Shipping available for $30 91 Snap-On 8' Rolling Toolbox with Worktop Fully Loaded with Tools 30" x 8' x 6' tall, on castors, garage style door over worktop, includes all contents of box, hand tools, parts, fluids, etc., fully loaded and ready to go. Very nice Toolbox! 92 Milwaukee Reciprocating Saw Includes case, 2 batteries, 2 chargers 93 Milwaukee Framing Nailer Includes 3 batteries, 2 chargers 94 Milwaukee M12 ProPex Expansion Tool Set Includes case, charger, (2) M12 batteries, 1/2", 3/4", and 1", pex heads, like new 95 DeWalt Cordless Tools Drill, flashlight, jigsaw, sawzall, oscillating tool, 2 batteries, dual port charger, carry bag 96 Zircon MT6 Metal Detector Brand new, comes with carry case 97 Echo Chainsaw Model: CS-590, 24" bar, works 98 Stihl TS420 Concrete Saw Mixed fuel, 12" blade, works 99 Bosch Jobsite Radio Powered by 110V or 18V battery 100 Baker 3665D Portable Band Mill SN: 18-937, model: BBS-03665D, meter reads: 872 hours, 1" x 28" band wheels, 1 1/2" bands, includes 3 extra new bands, log loading arm, 8' x 32'6" long overall, dual axle, Murphy shut-down, hydraulic turners, pop-ups, and controls, electronic setworks on stand, Cummins B3.3 4 cylinder diesel engine, includes flex pipe to PVC, 17'4" long bands 100A New Bands 1 1/2" x 17'4" long, 10 new blades, fit lot 100 101 Belt Conveyor Electric drive, 31" x 7' x 38" tall, 26" belt 102 Rollcase Electric drive, 2 1/2" x 34" rolls, 6" spacing, 40" x 34' x 29" tall, (5) 1/2 hp, 460V electric motors, includes catwalk over rollcase 103 Rollcase No drive, line shaft ready, 40" x 12' x 38" tall, 2 1/2" x 34" rolls, 6" spacing 104 Skate Rolls 16" x 10', 2" x 13" rolls, 6" spacing, includes 2 adjustable legs 105 Skate Rolls 16" x 10', 2" x 13" rolls, 6" spacing, includes 2 adjustable legs 106 Baker Edger (1st of an entirety) SN: 11382, model: BE-0, 3' x 4' infeed rolls, 4" x 30" capacity, 15 hp electric motor, (2) 10" blades-1 moveable, (2) 2' x 30" power feed belts-hydraulic drive on feed belts, includes flex pipe to PVC 107 Landing Tilt Table (Part of an entirety) 4' x 12' x 46" tall, air cylinders 108 Dead Rolls (Part of an entirety) 40" x 30' x 38" tall, no drive or gear chain-has sprockets, 2 1/2" x 34" rolls, 6" spacing 109 Baker Edger with Return System Entirety of Lots 106-108 With 10% raise. 110 2 Strand Transfer Deck and Unscrambler 6' x 11'6", H78 chain, 4" x 12" strands, hydraulic drive, includes shaft. Unscramber-Hydraulic drive, 4' x 56" wide, 2" x 55" steel slats, 111 Unscrambler Hydraulic drive, 4' x 56" wide, 2" x 55" steel slats, does not include shaft shared with lot 110 112 Rollcase Hydraulic drive, 5 1/2" x 12" rolls, 12" spacing, 30" x 10'6" x 45" tall, hydraulic cylinders on pop-ups and stops 113 Baker Chop Saw Model: BC0-0, SN: 99-290, 26" blade, includes 1 extra blade, 15 hp electric motor, hydraulic cylinder on head, includes control stand, electric starter and disconnect panels, 21" x 8' rollcase outfeed, 4" x 14" rolls, 11" spacing, electric drive on rolls, air cylinders on board stops, includes flex pipe to PVC 114 Vickers 5hp Hydraulic Pack SN: 99J-32370-01, 18" x 23" x 20" tank, includes valve bank with controls and all hydraulic lines to equipment 115 North Tech Industrial Single Head Resaw with Return Belt (1st of an entirety) 25 hp, 460V electric motor, electric control panel and cut-off box, hydraulic unit or feeds, 1 1/2" band, 1" x 30" band wheels, 15" x 9' feed belt, 15" x 9' return belt, electronic setworks, 6" x 16" capacity, includes flex pipe to PVC, 16'1" long bands 116 Skate Roll Return (Part of an entirety) 2" x 13" rolls, 6" spacing, adjustable legs, (1) 8' section-drop down to 45" section 117 North Tech Resaw Entirety of Lots 115-116 With 10% raise. 117A New Bands 1 1/2" x 16'1", fits lot 115, 25 new blades 118 Wood-Mizer HR1000 2 Head Resaw (1st of an entirety) SN: HR1000E025-2-10180651A2.04, Meter reads: 1349 hours, 480V, 3 ph, includes electrical control panel, 8" x 12' chain conveyor feed, 3/4" x 34" band wheels, 1 1/2" bands, includes 5 extra new bands, Auto-Lube system, 25 hp electric motor on each head, hydraulic drive on feed and power feed rolls, self contained hydraulic pack, includes hydraulic lines to runaround system, 17'1" long bands 119 Wood-Mizer Infeed Turn-Table (Part of an entirety) 78" x 100" x 40" tall, 3" x 8" rolls, 13" spacing, set of rolls on either side, 5 strand 4' x 80" transfer, hydraulic drive, air push cylinders 120 Wood-Mizer Outfeed Turn Table (Part of an entirety) 78" x 100" x 40" tall, 3" x 8" rolls, 13" spacing, set of rolls on either side, 5 strand 4' x 80" transfer, hydraulic drive, air push cylinders 121 Wood-Mizer Return Chain Conveyor (Part of an entirety) SN: 05160609, 6" chain, 9" x 12', hydraulic drive, 122 Wood-Mizer HR1000 Resaw with Runaround Entirety of Lots 118-121 With 10% raise. 123 De-Duster Electric drive, cut-off box, 8" x 90" feed belt, 6" x 8" capacity, 27" x 6' landing table, includes flex pipe to PVC 124 Brewer Single Head Notcher Model: BR-DE-CF, SN: 122801, electric drive, 460V, includes electric control panel, and cut off box, 9'6" long chain with peg feed chain, 8" width capacity, adjustable height capacity, 5 hp hydraulic pack for feed 125 Morgan Cut-Off Block Saw 42" x 7' x 40" tall, electric drive, 9" x 6' incline outfeed belt, 24" blade, includes flex pipe to PVC 126 Baker 4-Tier Stack Rack Model: BSR-0, SN: 20-535, 7' x 7' x 6' tall overall, each section is 42" x 42" x 57" tall, rotates on base, fork pockets 127 Morgan Single Head Notcher Electric drive, 480V, uninstalled, 6" x 9'6" feed belt 128 100 Gallon Diesel Transfer Tank 2' x 45" x 2' tank, GPI 12V pump with hose and nozzle 129 Diesel Fuel Tank 30" x 64" x 24" tank, hand pump with hose and nozzle 130 Diesel Fuel Tank 30" x 70" x 42" tank, 110V plug-in for pump 131 16" Dust Blower Electric drive, 8" inlet and outlet, includes all PVC pipe from equipment to blower and from blower to cyclone, 30' of 6" from blower to cyclone, 50" of 6", 24' of 4" PVC, lots of adapters and fittings, no flex hose included 132 Dust Cyclone 6" x 8', includes dust lock at bottom with 6" x 8' unloading auger, electric drive 133 36" Dust Blower (1st of an entirety) 25 hp electric motor, includes all black PVC pipe, outside building approx. 70' of 10" PVC, 10" inlet and outlet, includes steel frame around black dust pipe, 4"-13', 45", 14", 4" 134 PVC Dust Pipe (Part of an entirety) Includes all dust pipe from lot 133 to equipment, no flex pipe included, 38' of 10", 70' of 6", 75' of 4", lots of fittings and adapters, includes (2) Shop-Vac Reels 135 Dust Cyclone System (Part of an entirety) Approx. 3' x 12' cyclone on top, 10' x 12' big cyclone with dust lock and unloading auger on bottom, 8" x 15' auger with electric drive, includes entire steel frame 136 Dust Collection System Entirety of Lots 133-135 With 10% raise. 138 2007 Ingersoll Rand G125 Portable Genset VIN: 4FVGPBCB57U377271, meter reads: 3943 hours, ST225/75R15 tires, (2) 6-lug axles, 100kw, John Deere 6068TF275 engine, engine SN: PE6068T613268, 12V battery, master disconnect switch, 3 ph, 480V 139 New Foster 5hp Hydraulic Pack Model: 50-1-4E, SN: 225461, never installed, 12" x 30" x 12" tank, cooling unit, valves 140 Murphy 14" Dust Blower 7" inlet, 6" outlet, Uninstalled, electric drive with 4 prong plug-in 141 Miller SRH-444 Welder SN: LC599267, 230/460V, 3 ph, 19.6kw, 400 amp output 142 Hobart Handler 190 Wire Welder SN: MK049878N, 25-190 amp output, includes helmet, gloves, tank, cart, leads and gun, 220V plug-in 143 Self Dumping Hopper On castors, 3' x 5' x 30" deep 144 Self Dumping Hopper 3' x 4' x 2' deep 145 Floor Fan 42", 110V plug-in, on castors 146 Floor Fan 24", 110V plug-in, on stand 147 Skate Rolls 92" x 15' x 38" tall, 2 1/2" x 88" rolls, 13" spacing 148 Lumber Rack 5' x 12' 149 Lumber Rack 5' x 12' 150 Lumber Rack 5' x 12' 151 Rollcase Electric drive, 6 1/2" x 30" rolls, 30" spacing, 5 spiral rolls 152 Skate Rolls 30" x 10', 2" x 26 1/2" rolls, 6" spacing 153 Unverferth Enclosed Belt Conveyor 7 1/2" cleated belt, 19'6" long top feed, hydraulic drive 154 Rollcase Electric drive, 2 1/2" x 52" rolls, 6" spacing, 4' x 58" 155 20hp Hydraulic Pack 24" x 35" x 18" tank, valve bank, 460V 156 Continental 5hp Hydraulic Pack 15" x 17" x 14" tank, stand with hydraulic controls, hydraulic hoses 157 Pallet Nailer 3-strand, air over electric powered, no nail guns, auto stacker, pallet of parts and stacker arms included, 8' x 12' x 99" tall overall 250 TCM FHG36N8 Forklift SN: 46400369. Meter reads: 1,715 hours. Engine: 6 cylinder. Fuel type: LP-2 tanks included. Load capacity: 8,000 lbs. Stage mast: 2. Mast height: 106". Side shift: 157 1/2". ROPS: Open. Tire size: (front) 7.5-15, (rear) 7.0x12. Tires: Solid. Features and Notes: 6" x 60" forks. 251 Clark C30B Forklift SN: C30B-544-463. Meter reads: No meter. Engine: 4 cylinder. Fuel type: Gas. Load capacity: Approx. 3,000 lbs. Stage mast: 2. Mast height: 7'. Side shift: No. ROPS: Open. Tire size: 18x8x12 1/8. Tires: Solid. Features and Notes: 4" x 42" forks. Starts, runs, and operates. 255 2018 Case TR340 Skid Steer SN: NJM453017 (PIN: JAFTR340HJM453017). Meter reads: 966 hours. Engine: FPT 3.4L. HP: 84-90. Fuel type: Diesel. ROPS: Fully enclosed. Controls: Joystick. 2 Speed: Yes. Highflow: Yes. Quick attach: Power. Lift capacity: 3,400 lbs. Attachments: None included. A/C: Yes. Heater: Yes. Features and Notes: 18" tracks. Runs and operates well. 256 Kubota Skid Steer Forks SN: 1071253K, 4" x 48" forks, 46" wide, quick attach 257 Skid Steer Bucket 26" x 82" x 18" tall, standard quick attach 258 Fork Extensions 7' long, 2 1/2" x 5 1/2" fork opening, made of 1/4" steel 260 TCM 835-2 Wheel Loader SN: 64301196. Meter reads: 8,618 hours. Engine: Zexel 6 cylinder. Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: No. Center to center of pins: 21". Lift capacity: 5,650 lbs. Operating weight: 19,440 lbs. Tire Size: 17.5R25. Attachments: 6" x 36" pin-through forks-5' wide. Heater: No. A/C: No. Quick Attach: No. Features and Notes: Starts, runs, and operates. Includes 1 new tire. 265 Kubota KX040-4 Excavator SN: KBCDZ15CPL3A36218. Meter reads: 933 hours. Engine: Kubota D1803 (SN: 7KV6538). HP: 40. Fuel type: Diesel. Bucket: 24", 5 tooth. Hydraulic thumb: Yes. Heater: Yes. A/C: Yes. Features and Notes: 6' 6-way blade, 14" tracks, axillary hydraulics, quick coupler. Starts and operates well 266 Excavator Jack Hammer 2 hose hydraulic hookup, quick attach, was used on lot 265 267 RUT MFG Excavator Brush Cutting Attachment Model: E-BE-36, 20 gpm, 36" cutting width, quick attach, 2 hose hydraulic hook-up, was used on lot 265 268 Excavator Bucket 12", 3 tooth, quick coupler, fits lot 265 270 2000 International 4900 4x2 Dump Truck VIN: 1HTSDAAR0YH224756 Meter reads: 72,232 miles. Engine: DT 466E. Transmission: Automatic. GVWR: 36,220 lbs. Front axle rating: 13,220 lbs. Rear axle rating: 23,000 lbs. Heat/AC: No. Wet kit: No. Features and Notes: 152" WB, Henderson bed (SN: HDSA-08706, model: 10x30x0B), 8' x 10' x 30" high bed, 11R22.5 tires, single axle, includes 10' snow blade. Starts and runs. Has title. 275 2019 Gator Gooseneck Flatbed Trailer VIN: 4Z1GF2522KS000377, GVWR: 16000 lbs., (2) 7000 lbs. axles, 33' long overall, 101" x 20' main deck, 5' dovetail, 40" x 5' ramps, 235/80R16 tires, storage box for straps/chains, includes contents of box. Has title. 276 Equipment Tag Trailer Pulls with pintle hitch, tri-axle, 8-14.5 tires, 26' long overall, 8' x 16' main deck, 5' dovetail, 20" x 5' ramps. No title, bill of sale only. 277 Kohler 60kw Portable Genset Generator model: 60RE0ZJB, SN: 2031192, Meter reads: 1264 hours, 120/240V, single or 3 ph., 12V battery system, John Deere 4045TF270E engine, engine SN: PE4045T439385, pulls with pintle hitch, ST235/85R16 tires. 280 Helicopter 4 cylinder gas motor, includes blades-not installed. Does run 285 Drain Tiles Coil of 4 1/2" drain tile-length unknown, lots of PVC tiles-(20) 6 1/2" x 10' PVC tiles, (8) 10' sticks of 4" PVC, assorted smaller pieces 286 20' Shipping Container Inside height-94", inside width-94", water-tight, includes all contents 287 20' Shipping Container Inside height-94", inside width-94", water-tight, includes all contents 288 Hytrol Belt Conveyor Electric drive, on castors, 8" cleated belt, 14" x 5' x 52" tall overall 289 ACS Belt Conveyor Electric drive, 10" belt, 20" x 42" x 62" tall overall 290 Werner 10' Step Ladder 300 lbs. capacity 291 Werner 8' Step Ladder 300 lbs. capacity 292 Werner 10' Step Ladder 300 lbs. capacity 293 Electric Motors 2 motors, both identical, 15 hp, 460V, 254T frame, 3510 rpm 294 Werner 8' Step Ladder 300 lbs. capacity 295 Werner 10' Step Ladder 300 lbs. capacity 296 Werner 6' Step Ladder 375 lbs. capacity 297 Extension Ladder Compact when folded, extends up to 16' 298 2 Wheel Cart 299 2 Wheel Cart 300 AC Delco Floor Jack 4500 lbs. 301 Trash Cans (2) 55 gallon, (1) 10 gallon 302 Hand Tools Shovels, broom, cant hook, post hole digger, splitting maul 303 Hand Tools Shovels, brooms, post hole digger, dbl sided axe, pry bar 304 Hand Tools Shovel, broom, cant hook, pry bar 305 Clamps (2) Jorgensen 36" clamps, like new 306 Homemade Steamer Unit 10 1/2" x 16' PVC tube with door, (2) 15 lbs. LP tanks with heating unit 307 Haul Master Pallet Jack 5000 lbs. capacity, 6 1/2" x 48" forks, 27" wide 308 Banding Cart Partial roll of 5/8" steel banding, banding tools 309 Bosch 10" Table Saw 110 plug-in, 26" x 31" table top 310 DeWalt Chop Saw with Stand 12", 110V plug-in, adjustable stand 311 DeWalt Planer 110V plug-in, 6" x 13" capacity, includes stand 312 DeWalt Space Heater 140000 BTU, 110V plug-in and fuel 313 16 Gallon Shop-Vac 6 hp, 110V plug-in 314 Craftsman Radial Arm Saw 10" blade, 110 plug-in 315 Ridgid Wet/Tile Saw 110 plug-in, on stand with tray, 8" blade 316 Porter Cable 6" Variable Speed Bench Jointer 110 plug-in 317 DeWalt 14" Metal Cut-Off Saw 110 plug-in 318 Honda EU2000 Generator Starts and runs 319 Power Matic Table Top Drill Press Model: 701, SN: 1791310, 110V plug-in 320 Gmax 5900 Gas Powered Airless Paint Sprayer Honda GX160 gas motor, includes hose and wand 321 Bosch Laser with Stand and Reader 322 Kobalt 7" Chop Saw 110V plug-in 323 Bosch Hammer Drill Model-RH540M, includes case, 110V plug-in 324 Stinger Cap Stapler Model: CS150, air powered, includes case and 2 partial boxes of caps and staples 325 DeWalt Tools Corded plate jointer with case, 18V 1/2" impact with battery and case 326 Hitachi Router Set 110V plug-in, includes case 327 Pallet of Tools Paslode battery nailer, Dremel, Makita hammer drill, (2) Hitachi 18 ga brad nailers, Metabo 2 1/2" 15 ga finish nailer, Hitachi 2 1/2" 15 ga finish nailer 328 Pallet of Tools Stinger cap slap staplers, assorted DeWalt cordless tools, Bosh jigsaw, Hitachi 2" 18 ga brad nailer, Bostitch 18 ga brad nailer 329 Pallet of Tools Skill saws, beam cutting saws, framing nailers, roofing nailers, DeWalt hand planer and sander, heat gun, fan 330 Pallet of Tools Saw horses, Bostitch 18 ga narrow crown, stapler, assorted chop saw and metal cut off saw blades, hand tools 331 Pallet of Tools Hilti hammer drill, fuel jugs, work light, tool pouches, safety harnesses 332 Pallet of Tools Fuel jugs, skill saw, hand tools, extension cords, fasteners, saw horses, Bosch "Bulldog" Hammer drill 333 Sand Blasting Tank On castors, holds up to 110 lbs. of pressure 334 LP Heaters (2) 15 lbs. tanks with heaters 335 Forklift LP Tank Empty 336 Forklift LP Tank Empty 337 Anvil 3 1/2" x 24" x 11" tall 338 Pex Pipe Some 1", some 1/2" 339 20 Ton Shop Press Air powered bottle jack 340 Shelf with Tools 16" x 30" x 62" tall shelf, skill saw, grinders, parts, concrete hand tools 341 Parts Includes all contents on floor under shelves in parts room, bearings, motors, fasteners, fittings, wire, hand tools, air blaster, tank 342 Hand Tools Includes all contents on lower shelf in parts room, Milwaukee hole saw set, hedge trimmer, 1st Aid kits, fasteners, chainsaw grinder, hand tools, hydraulic parts 343 Parts Includes all contents of top shelf in parts room, belts, air cylinders, electric motors, wire, fluids, towels, grease |
Photo Gallery
|
|||||
---|---|---|---|---|---|
|